Professional Documents
Culture Documents
No pass, free to
all!
Note: Diagbox 8.XX software shared here is tested by individuals, but no engineers.
Hope it helps but install and try at your own risk!
If you need a Lexia3 PP2000 Diagbox software 100% confirmed OK, you can get Diagbox
7.76 software CD only �8!
(HD Video) How to install Diagbox V7.76 for Lexia-3 PP2000 Peugeot Citroen?
[embed]www.youtube.com/watch?v=wJJdj3�
It's saying that Diagbox 8.xx work with both original and clone Lexia 3 PP2000
Diagnostic Tool. (Diagbox 7.82 tested OK, newer version is testing)
mega.nz/#!Z0EHmRwB!T4QsYzZxrNi�
Feedbacks:
Run Diagbox 8.17 on WIN7 pro 32= OK, but PP2000 not work showing message "PP2000 is
now disable this pc".
mega.nz/#!V8VS1Yib!p3MCZCzs8j7�
Feedbacks:
Try PP2000 and Lexia after installing APP-835 (No need to connect to a car, try
manually a111111111111111 as VIN and 11111 as RPO).
Download Diagbox 8.38 to Diagbox 8.42 update: 5.1 MB
mega.nz/#!49F3VAxS!t1w6Hq0fPub�
mega.nz/#!doFAAaKD!uTQ9QNW4-F6�
If App-835 folder is used to update DiagBox 7.xx, then updates 2, 3 and 4 can be
used.
-- Ensure you have a backup copy of the file:
-- Download and execute the appropriate file for your own setup. The process will
copy all necessary files to the updt folder, it will then automatically kill all
associated processes to enable overwriting without conflicts.
-- Run DiagBox to start the update process and wait until DiagBox is operational.
Once successfully operational, close DiagBox and restart your computer to ensure
all processes are running
Lexia language is set to English and PP2000 to French, if you wish to change them,
edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace
"GB" with "FR" or vise versa.
Notice that DiagBox version will NOT be changed by these updates.
DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.
If you wish to revert to your original setup:
Make sure you are running DiagBox as Administrator and the network is disconnected.
Before you start DiagBox, navigate to "C:\AWRoot\dtwr\updt\" and delete all
contents of the updt folder. Otherwise, it will attempt to update the failed
updates that you tried earlier. Do not make changes in "AWRoot".