Professional Documents
Culture Documents
USA
Sales & Manufacturing
Arlington, TX
817-258-3000 (FAX 817-258-3333)
Regional
Manufacturing Plants
Albemarle, NC
704-982-9555 (FAX 704-982-9599)
Atlanta, GA
404-292-8744 (FAX 404-292-7771)
Burleson, TX
817-295-7151 (FAX 817-447-3840)
Danielsville, PA
610-837-1841 (FAX 610-837-7337)
Ft. Worth, TX
817-258-3000 (FAX 817-258-3173)
Montpelier, OH
419-485-5515 (FAX 419-485-3565)
Sacramento, CA
916-441-7172 (FAX 916-441-4600)
HEAVY-DUTY
Nashville, TN
615-871-4730 (FAX 615-871-4125)
Pittsburgh, PA
724-452-4555 (FAX 724-452-5794)
CONVEYOR
Portland, OR
503-223-7261 (FAX 503-221-0203)
Tampa, FL
813-623-1705 (FAX 813-626-8953)
PULLEYS
Manufacturing Only
Abilene, TX • Clarksville, TX • Dallas, TX
Mansfield, TX • Paragould, AR
Cambridge, Ontario
CANADA
COPYRIGHT © 2016 • Martin SPROCKET & GEAR, INC. ALL RIGHTS RESERVED • PTC-HDCP 0805
INDEX
SECTION M
PRODUCTS PAGE
PRODUCTS PAGE
LAGGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTINUATION
MOLDED URETHANE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-73
SOF (STATIC CONDUCTIVE OIL AND FIRE RESISTANT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-73
WEAR ITEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-74 — M-75
SHELL LAGGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-74
WEAR RIMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-74
WING LAGGING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-74
LAGGED REPLACEMENT CONTACT BARS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-74
FREQUENTLY ASKED QUESTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-75
CONVEYOR BUSHINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-76 — M-79
MXT® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-76
MXT-STL® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-76
M-HE® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-77
WELD ON HUBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-78
MXT® BUSHING INSTALLATION AND REMOVAL GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-79
SHAFTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-80
TAKE-UP FRAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-81 — M-88
CROSS REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-81
TOP ANGLE TAKE-UP FRAMES (MTA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-82
LIGHT DUTY TAKE-UP FRAMES (MLD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-83
HEAVY-DUTY TAKE-UP FRAMES (MHD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-84
CENTER PULL TAKE-UP FRAMES (MCP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-85
WIDE SLOT TAKE-UP FRAMES (MWS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-86
TUBE TAKE-UP FRAMES (MTTU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-87
BEARING COMPATIBILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-88
CONVEYOR PULLEY AND SHAFT ENGINEERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-89 — M-90
BELT CONVEYOR DATA SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-91
HEAVY-DUTY CONVEYOR PULLEY DATA SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-92
CLEAN FLIGHT® WING PULLEY DATA SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-93 — M-94
TERMS & CONDITIONS OF SALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-95
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-96
ADDITIONAL TERMS & CONDITIONS APPLICABLE TO ORDERS OF STOCK PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-96
M-2
Heavy-Duty
Conveyor Pulleys
1. Head Pulley The Pulley at the discharge end of a conveyor belt; may be either and Idler or
a Drive Pulley. Usually it has a larger diameter than other Pulleys in the System and is often
lagged to increase traction and Pulley life.
2. Snub Pulley Mounted close to the Drive Pulley on the return side of the belt, the Snub Pulley’s
primary job is to increase the angle of wrap around the Drive Pulley, thereby increasing
traction. Its secondary purpose is reducing belt tension, which is important in maximizing
conveyor component life. The Snub Pulley may be lagged for longer wear life.
3. Take-Up Bend Pulley The Bend Pulley is used for changing the direction of the belt running to the gravity take-up. Maybe lagged for longer wear
life.
4. Take-Up Pulley An adjustable Idler Pulley made to accommodate changes in the length of a conveyor belt to maintain proper tension.
5. Tail Pulley A Pulley at the tail of the belt conveyor opposite the normal discharge end; may be Drive Pulley or an Idler Pulley.
6. Return Idler The Idler or roller on which the conveyor belt rides after the load which it was carrying has been dumped.
Sales and Engineering will work with you to completely solve your belt conveying needs. The following pages will assist you in selecting most
of the components for your conveyor. Since there are infinite amounts of conveying possibilities and configurations our sales and engineering staff
are prepared to assist you with a custom solution.
M-3
Conveyor Pulley
Nomenclature
Part Nomenclature
Face
C Crown
C S D 120 26 X25 L 3 H Lagging Style
If no letter, Lagging is Smooth
F Flat H Herringbone
Pulley Type D Diamond Groove
C Ceramic
S Standard Duty (no thickness specified)
M Mine Duty S Slide Lagging
Q Quarry Duty R Radial/Circumferential
QAR Quarry Duty AR P Parallel (with shaft)
E Engineered Class
Pulley Style Lagging Thickness
D Drum 2 1/4" 4 1/2" 6 3/4"
W Wing 3 3/8" 5 5/8"
CF Clean Flight®
Lagging
Diameter
No suffix, no lagging
Example:
120 12.0" Bushing Part Number
065 6.5" Conveyor pulleys use “short" bushings
Face Width XT MXT-STL (Steel)
X or MXT (Cast)
In inches
SF, E, F, JS,... QD Bushing
K TB Bushing
H M-HE
M-4
Drum Pulleys
— Machined
's Machined Drum Pulleys are manufactured with Crown face. Flat face available upon request.
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-5
Drum Pulleys
— Machined
C A
B
's Standard Drum Pulleys are manufactured with Crown face. Flat face available upon request.
Standard Duty Drum Pulleys (Lagged) Standard Duty Drum Pulleys (Lagged)
Approx. Approx.
Dia. Face Max Setback Dia. Face Max Setback
Part Number Hub Lagging Weight Part Number Hub Lagging Weight
A C Bore B* A C Bore B*
(lb) (lb)
6 CSD06020X25L3H 20 MXT25 2 .5 .75 .375 34 16 CSD16038X40L3H 38 MXT40 4 1 .375 206
6 CSD06032X25L3H 32 MXT25 2 .5 .75 .375 52 16 CSD16044X30L3H 44 MXT30 3 .875 .375 230
8 CSD08026X25L3H 26 MXT25 2 .5 .75 .375 61 16 CSD16044X35L3H 26 MXT35 3.5 .875 .375 229
8 CSD08032X25L3H 32 MXT25 2 .5 .75 .375 47 16 CSD16051X35L3H 51 MXT35 3.5 .875 .375 298
10 CSD10026X25L3H 26 MXT25 2 .5 .75 .375 86 16 CSD16051X40L3H 51 MXT40 4 1 .375 307
10 CSD10026X30L3H 26 MXT30 3 .875 .375 85 16 CSD16063X35L3H 63 MXT35 3.5 .875 .375 362
10 CSD10032X25L3H 32 MXT25 2 .5 .75 .375 104 18 CSD18026X30L3H 26 MXT30 3 .875 .375 167
10 CSD10044X25L3H 44 MXT25 2 .5 .75 .375 133 18 CSD18026X35L3H 26 MXT35 3 .5 .875 .375 172
10 CSD10044X30L3H 44 MXT30 3 .875 .375 136 18 CSD18026X40L3H 26 MXT40 4 1 .375 176
10 CSD10051X30L3H 51 MXT30 3 .875 .375 149 18 CSD18026X45L3H 26 MXT45 4.5 1 .375 190
12 CSD12020X25L3H 20 MXT25 2 .5 .75 .375 104 18 CSD18032X30L3H 32 MXT30 3 .875 .375 205
12 CSD12026X25L3H 26 MXT25 2 .5 .75 .375 112 18 CSD18032X35L3H 32 MXT35 3.5 .875 .375 204
12 CSD12026X30L3H 26 MXT30 3 .875 .375 110 18 CSD18032X40L3H 32 MXT40 4 1 .375 214
12 CSD12026X30L4H 26 MXT30 3 .875 .5 111 18 CSD18032X45L3H 32 MXT45 4.5 1 .375 227
12 CSD12032X25L3H 32 MXT25 2.5 .75 .375 135 18 CSD18038X30L3H 38 MXT30 3 .875 .375 230
12 CSD12032X30L3H 32 MXT30 3 .875 .375 133 18 CSD18038X35L3H 38 MXT35 3.5 .875 .375 229
12 CSD12032X30L4H 32 MXT30 3 .875 .5 134 18 CSD18038X40L3H 38 MXT40 4 1 .375 238
12 CSD12032X35L3H 32 MXT35 3.5 .875 .375 142 18 CSD18044X30L3H 44 MXT30 3 .875 .375 268
12 CSD12038X25L3H 38 MXT25 2.5 .75 .375 151 18 CSD18044X35L3H 44 MXT35 3.5 .875 .375 267
12 CSD12038X30L3H 38 MXT30 3 .875 .375 149 18 CSD18044X40L3H 44 MXT40 4 1 .375 276
12 CSD12038X35L3H 38 MXT35 3.5 .875 .375 159 18 CSD18051X45L3H 51 MXT45 4.5 1 .375 278
12 CSD12044X25L3H 44 MXT25 2.5 .75 .375 174 20 CSD20026X30L3H 26 MXT30 3 .875 .375 191
12 CSD12044X30L3H 44 MXT30 3 .875 .375 172 20 CSD20026X35L3H 26 MXT35 3.5 .875 .375 190
12 CSD12051X25L3H 51 MXT25 2.5 .75 .375 192 20 CSD20026X35L4H 26 MXT35 3.5 .875 .5 191
12 CSD12051X30L3H 51 MXT30 3 .875 .375 191 20 CSD20026X40L3H 26 MXT40 4 1 .375 201
12 CSD12051X35L3H 51 MXT35 3.5 .875 .375 200 20 CSD20026X45L3H 26 MXT45 4.5 1 .375 218
12 CSD12063X30L3H 63 MXT30 3 .875 .375 312 20 CSD20032X30L3H 32 MXT30 3 .875 .375 236
14 CSD14020X30L3H 20 MXT30 3 .875 .375 104 20 CSD20032X35L3H 32 MXT35 3.5 .875 .375 235
14 CSD14026X25L3H 26 MXT25 2.5 .75 .375 123 20 CSD20032X35L4H 32 MXT35 3.5 .875 .5 236
14 CSD14026X30L3H 26 MXT30 3 .875 .375 122 20 CSD20032X40L3H 32 MXT40 4 1 .375 236
14 CSD14026X35L3H 26 MXT35 3.5 .875 .375 121 20 CSD20032X45L3H 32 MXT45 4.5 1 .375 262
14 CSD14032X25L3H 32 MXT25 2.5 .75 .375 143 20 CSD20038X30L3H 38 MXT30 3 .875 .375 263
14 CSD14032X30L3H 32 MXT30 3 .875 .375 149 20 CSD20038X35L3H 38 MXT35 3.5 .875 .375 262
14 CSD14038X25L3H 38 MXT25 2.5 .75 .375 162 20 CSD20038X35L4H 38 MXT35 3.5 .875 .5 264
14 CSD14038X30L3H 38 MXT30 3 .875 .375 168 20 CSD20038X40L3H 38 MXT40 4 1 .375 272
14 CSD14038X35L3H 38 MXT35 3.5 .875 .375 167 20 CSD20044X40L4H 44 MXT40 4 1 .5 317
14 CSD14044X30L3H 44 MXT30 3 .875 .375 194 20 CSD20044X40L3H 44 MXT40 4 1 .375 316
14 CSD14044X35L3H 44 MXT35 3.5 .875 .375 193 20 CSD20051X40L3H 51 MXT40 4 1 .375 403
14 CSD14044X40L3H 44 MXT40 4 1 .375 205 20 CSD20051X45L4H 51 MXT45 4.5 1 .5 421
14 CSD14051X30L3H 51 MXT30 3 .875 .375 216 24 CSD24026X35L3H 26 MXT35 3.5 .875 .375 270
14 CSD14051X35L3H 51 MXT35 3.5 .875 .375 215 24 CSD24026X35L4H 26 MXT35 3.5 .875 .5 271
14 CSD14051X40L3H 51 MXT40 4 1 .375 227 24 CSD24026X40L3H 26 MXT40 4 1 .375 280
14 CSD14063X30L3H 63 MXT30 3 .875 .375 357 24 CSD24026X45L3H 26 MXT45 4.5 1 .375 280
16 CSD16020X30L3H 20 MXT30 3 .875 .375 122 24 CSD24032X30L3H 32 MXT30 3 .875 .375 331
16 CSD16020X35L4H 20 MXT35 3.5 .875 .5 122 24 CSD24032X35L3H 32 MXT35 3.5 .875 .375 330
16 CSD16026X25L3H 26 MXT25 2.5 .75 .375 135 24 CSD24032X35L4H 32 MXT35 3.5 .875 .5 332
16 CSD16026X30L3H 26 MXT30 3 .875 .375 136 24 CSD24032X40L3H 32 MXT40 4 1 .375 339
16 CSD16026X35L3H 26 MXT35 3.5 .875 .375 143 24 CSD24032X45L3H 32 MXT45 4.5 1 .375 339
16 CSD16026X40L2H 26 MXT40 4 1 .25 154 24 CSD24038X35L3H 38 MXT35 3.5 .875 .375 363
16 CSD16026X40L3H 26 MXT40 4 1 .375 154 24 CSD24038X35L4H 38 MXT35 3.5 .875 .5 364
16 CSD16026X50L3H 26 MXT50 5 1 .375 165 24 CSD24038X40L3H 38 MXT40 4 1 .375 371
16 CSD16032X25L3H 32 MXT25 3 .75 .375 170 24 CSD24038X45L3H 38 MXT45 4.5 1 .375 371
16 CSD16032X30L3H 32 MXT30 3 .875 .375 176 24 CSD24044X40L3H 44 MXT40 4 1 .375 430
16 CSD16032X35L3H 32 MXT35 3.5 .875 .375 175 24 CSD24044X40L4H 44 MXT40 4 1 .5 432
16 CSD16032X40L3H 32 MXT40 4 1 .375 185 24 CSD24044X45L3H 44 MXT45 4.5 1 .375 430
16 CSD16038X25L3H 38 MXT25 2.5 .75 .375 152 24 CSD24051X40L3H 51 MXT40 4 1 .375 534
16 CSD16038X30L3H 38 MXT30 3 .875 .375 198 24 CSD24051X45L4H 51 MXT45 4.5 1 .5 536
16 CSD16038X35L3H 38 MXT35 3.5 .875 .375 197
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-20
Drum Pulleys
Standard Duty — M-HE Bushed
C A
B
Standard Duty Drum Pulleys — M-HE Bushed Standard Duty Drum Pulleys — M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
6 CSD06012H25 12 M-HE25 2.5 .75 26 10 CSD10051H30 51 M-HE30 3 .875 145
6 CSD06014H25 14 M-HE25 2.5 .75 29 10 CSD10054H25 54 M-HE25 2.5 .75 145
6 CSD06018H25 18 M-HE25 2.5 .75 34 10 CSD10060H30 60 M-HE30 3 .875 165
6 CSD06020H25 20 M-HE25 2.5 .75 37 10 CSD10063H25 63 M-HE25 2.5 .75 165
6 CSD06024H25 24 M-HE25 2.5 .75 39 10 CSD10063H30 63 M-HE30 3 .875 172
6 CSD06026H25 26 M-HE25 2.5 .75 45 10 CSD10063H35 63 M-HE35 3.5 .875 170
6 CSD06030H25 30 M-HE25 2.5 .75 51 12 CSD12012H25 12 M-HE25 2.5 .75 56
6 CSD06032H25 32 M-HE25 2.5 .75 53 12 CSD12014H25 14 M-HE25 2.5 .75 61
6 CSD06036H25 36 M-HE25 2.5 .75 59 12 CSD12014H30 14 M-HE30 3 .875 69
6 CSD06038H25 38 M-HE25 2.5 .75 61 12 CSD12018H25 18 M-HE25 2.5 .75 72
6 CSD06040H25 40 M-HE25 2.5 .75 65 12 CSD12018H30 18 M-HE30 3 .875 80
6 CSD06044H25 44 M-HE25 2.5 .75 70 12 CSD12020H25 20 M-HE25 2.5 .75 77
6 CSD06051H25 51 M-HE25 2.5 .75 80 12 CSD12020H30 20 M-HE30 3 .875 85
6 CSD06063H25 63 M-HE25 2.5 .75 69 12 CSD12022H25 22 M-HE25 2.5 .75 83
8 CSD08012H25 12 M-HE25 2.5 .75 33 12 CSD12024H25 24 M-HE25 2.5 .75 88
8 CSD08014H25 14 M-HE25 2.5 .75 36 12 CSD12026H25 26 M-HE25 2.5 .75 93
8 CSD08018H25 18 M-HE25 2.5 .75 43 12 CSD12026H30 26 M-HE30 3 .875 101
8 CSD08020H25 20 M-HE25 2.5 .75 76 12 CSD12026H35 26 M-HE35 3.5 .875 100
8 CSD08020H35 20 M-HE35 3.5 .875 47 12 CSD12028H25 28 M-HE25 2.5 .75 105
8 CSD08024H25 24 M-HE25 2.5 .75 53 12 CSD12028H30 28 M-HE30 3 .875 112
8 CSD08026H25 26 M-HE25 2.5 .75 58 12 CSD12030H25 30 M-HE25 2.5 .75 110
8 CSD08032H25 32 M-HE25 2.5 .75 71 12 CSD12032H25 32 M-HE25 2.5 .75 115
8 CSD08038H25 38 M-HE25 2.5 .75 81 12 CSD12032H30 32 M-HE30 3 .875 123
8 CSD08038H30 38 M-HE30 3 .875 88 12 CSD12032H35 32 M-HE35 3.5 .875 121
8 CSD08044H25 44 M-HE25 2.5 .75 80 12 CSD12032H45 32 M-HE45 4.5 1 137
8 CSD08044H30 44 M-HE30 3 .875 101 12 CSD12034H30 34 M-HE30 3 .875 128
8 CSD08051H25 51 M-HE25 2.5 .75 107 12 CSD12038H25 38 M-HE25 2.5 .75 131
8 CSD08051H30 51 M-HE30 3 .875 113 12 CSD12038H30 38 M-HE30 3 .875 138
8 CSD08063H30 63 M-HE30 3 .875 135 12 CSD12038H35 38 M-HE35 3.5 .875 137
10 CSD10010H25 10 M-HE25 2.5 .75 39 12 CSD12040H25 40 M-HE25 2.5 .75 142
10 CSD10014H25 14 M-HE25 2.5 .75 41 12 CSD12040H30 40 M-HE30 3 .875 150
10 CSD10018H25 18 M-HE25 2.5 .75 57 12 CSD12044H25 44 M-HE25 2.5 .75 153
10 CSD10020H25 20 M-HE25 2.5 .75 62 12 CSD12044H30 44 M-HE30 3 .875 160
10 CSD10020H35 20 M-HE35 3.5 .875 68 12 CSD12044H35 44 M-HE35 3.5 .875 158
10 CSD10022H25 22 M-HE25 2.5 .75 66 12 CSD12051H25 51 M-HE25 2.5 .75 171
10 CSD10022H35 22 M-HE35 3.5 .875 73 12 CSD12051H30 51 M-HE30 3 .875 179
10 CSD10024H25 24 M-HE25 2.5 .75 70 12 CSD12051H35 51 M-HE35 3.5 .875 177
10 CSD10026H25 26 M-HE25 2.5 .75 75 12 CSD12057H25 57 M-HE25 2.5 .75 262
10 CSD10026H30 26 M-HE30 3 .875 82 12 CSD12057H30 57 M-HE30 3 .875 269
10 CSD10028H25 28 M-HE25 2.5 .75 83 12 CSD12057H35 57 M-HE35 3.5 .875 267
10 CSD10030H25 30 M-HE25 2.5 .75 88 12 CSD12057H45 57 M-HE45 4.5 1 282
10 CSD10032H25 32 M-HE25 2.5 .75 92 12 CSD12063H25 63 M-HE25 2.5 .75 291
10 CSD10032H30 32 M-HE30 3 .875 99 12 CSD12063H30 63 M-HE30 3 .875 298
10 CSD10038H25 38 M-HE25 2.5 .75 106 12 CSD12063H40 63 M-HE40 4 1 307
10 CSD10038H30 38 M-HE30 3 .875 113 14 CSD14012H40 12 M-HE40 4 1 86
10 CSD10044H25 44 M-HE25 2.5 .75 123 14 CSD14014H25 14 M-HE25 2.5 .75 76
10 CSD10044H30 44 M-HE30 3 .875 130 14 CSD14020H25 20 M-HE25 2.5 .75 94
10 CSD10044H35 44 M-HE35 3.5 .875 128 14 CSD14020H30 20 M-HE30 3 .875 102
10 CSD10051H25 51 M-HE25 2.5 .75 139 14 CSD14026H25 26 M-HE25 2.5 .75 113
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-21
Drum Pulleys
Standard Duty — M-HE Bushed
C A
B
Standard Duty Drum Pulleys — M-HE Bushed Standard Duty Drum Pulleys — M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
14 CSD14026H30 26 M-HE30 3 .875 121 16 CSD16032H60 32 M-HE60 6 1.125 228
14 CSD14026H35 26 M-HE35 3.5 .875 120 16 CSD16034H35 34 M-HE35 3.5 .875 180
14 CSD14028H30 28 M-HE30 3 .875 134 16 CSD16034H40 34 M-HE40 4 1 188
14 CSD14028H35 28 M-HE35 3.5 .875 133 16 CSD16038H25 38 M-HE25 2.5 .75 188
14 CSD14030H25 30 M-HE25 2.5 .75 134 16 CSD16038H30 38 M-HE30 3 .875 195
14 CSD14032H25 32 M-HE25 2.5 .75 140 16 CSD16038H35 38 M-HE35 3.5 .875 194
14 CSD14032H30 32 M-HE30 3 .875 146 16 CSD16038H40 38 M-HE40 4 1 203
14 CSD14038H25 38 M-HE25 2.5 .75 117 16 CSD16038H50 38 M-HE50 5 1 221
14 CSD14038H30 38 M-HE30 3 .875 165 16 CSD16040H25 40 M-HE25 2.5 .75 207
14 CSD14038H35 38 M-HE35 3.5 .875 117 16 CSD16040H30 40 M-HE30 3 .875 212
14 CSD14038H40 38 M-HE40 4 1 174 16 CSD16040H40 40 M-HE40 4 1 219
14 CSD14044H25 44 M-HE25 2.5 .75 186 16 CSD16040H45 40 M-HE45 4.5 1 225
14 CSD14044H30 44 M-HE30 3 .875 191 16 CSD16040H50 40 M-HE50 5 1 238
14 CSD14044H35 44 M-HE35 3.5 .875 190 16 CSD16044H25 44 M-HE25 2.5 .75 221
14 CSD14046H30 46 M-HE30 3 .875 197 16 CSD16044H30 44 M-HE30 3 .875 226
14 CSD14051H25 51 M-HE25 2.5 .75 208 16 CSD16044H35 44 M-HE35 3.5 .875 226
14 CSD14051H30 51 M-HE30 3 .875 212 16 CSD16044H40 44 M-HE40 4 1 233
14 CSD14051H35 51 M-HE35 3.5 .875 212 16 CSD16046H35 46 M-HE35 3.5 .875 233
14 CSD14051H40 51 M-HE40 4 1 222 16 CSD16051H25 51 M-HE25 2.5 .75 290
14 CSD14051H45 51 M-HE45 4.5 1 228 16 CSD16051H30 51 M-HE30 3 .875 295
14 CSD14054H25 54 M-HE25 2.5 .75 299 16 CSD16051H35 51 M-HE35 3.5 .875 294
14 CSD14057H30 57 M-HE30 3 .875 318 16 CSD16051H40 51 M-HE40 4 1 302
14 CSD14057H35 57 M-HE35 3.5 .875 317 16 CSD16051H50 51 M-HE50 5 1 321
14 CSD14057H40 57 M-HE40 4 1 327 16 CSD16057H30 57 M-HE30 3 .875 322
14 CSD14057H45 57 M-HE45 4.5 1 334 16 CSD16057H35 57 M-HE35 3.5 .875 321
14 CSD14063H25 63 M-HE25 2.5 .75 349 16 CSD16057H40 57 M-HE40 4 1 328
14 CSD14063H30 63 M-HE30 3 .875 352 16 CSD16057H45 57 M-HE45 4.5 1 335
14 CSD14063H35 63 M-HE35 3.5 .875 352 16 CSD16060H30 60 M-HE30 3 .875 345
14 CSD14063H40 63 M-HE40 4 1 362 16 CSD16063H25 63 M-HE25 2.5 .75 355
16 CSD16014H30 14 M-HE30 3 .875 99 16 CSD16063H30 63 M-HE30 3 .875 358
16 CSD16020H25 20 M-HE25 2.5 .75 113 16 CSD16063H35 63 M-HE35 3.5 .875 357
16 CSD16020H30 20 M-HE30 3 .875 121 16 CSD16063H40 63 M-HE40 4 1 364
16 CSD16022H25 22 M-HE25 2.5 .75 120 16 CSD16063H45 63 M-HE45 4.5 1 370
16 CSD16022H35 22 M-HE35 3.5 .875 127 16 CSD16063H50 63 M-HE50 5 1 383
16 CSD16024H30 24 M-HE30 3 .875 135 18 CSD18016H25 16 M-HE25 2.5 .75 117
16 CSD16026H25 26 M-HE25 2.5 .75 134 18 CSD18016H35 16 M-HE35 3.5 .875 124
16 CSD16026H30 26 M-HE30 3 .875 142 18 CSD18016H40 16 M-HE40 4 1 134
16 CSD16026H35 26 M-HE35 3.5 .875 141 18 CSD18016H45 16 M-HE45 4.5 1 154
16 CSD16026H50 26 M-HE50 5 1 169 18 CSD18024H25 24 M-HE25 2.5 .75 149
16 CSD16028H25 28 M-HE25 2.5 .75 153 18 CSD18026H25 26 M-HE25 2.5 .75 157
16 CSD16028H30 28 M-HE30 3 .875 159 18 CSD18026H30 26 M-HE30 3 .875 164
16 CSD16028H35 28 M-HE35 3.5 .875 159 18 CSD18026H35 26 M-HE35 3.5 .875 163
16 CSD16030H25 30 M-HE25 2.5 .75 160 18 CSD18026H40 26 M-HE40 4 1 173
16 CSD16032H25 32 M-HE25 2.5 .75 167 18 CSD18026H50 26 M-HE50 5 1 203
16 CSD16032H30 32 M-HE30 3 .875 174 18 CSD18028H25 28 M-HE25 2.5 .75 180
16 CSD16032H35 32 M-HE35 3.5 .875 173 18 CSD18028H30 28 M-HE30 3 .875 186
16 CSD16032H40 32 M-HE40 4 1 181 18 CSD18028H35 28 M-HE35 3.5 .875 186
16 CSD16032H45 32 M-HE45 4.5 1 188 18 CSD18028H40 28 M-HE40 4 1 194
16 CSD16032H50 32 M-HE50 5 1 200 18 CSD18030H25 30 M-HE25 2.5 .75 188
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-22
Drum Pulleys
Standard Duty — M-HE Bushed
C A
B
Standard Duty Drum Pulleys — M-HE Bushed Standard Duty Drum Pulleys — M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
18 CSD18032H25 32 M-HE25 2.5 .75 196 20 CSD20012H25 12 M-HE25 2.5 .75 119
18 CSD18032H30 32 M-HE30 3 .875 202 20 CSD20020H25 20 M-HE25 2.5 .75 154
18 CSD18032H35 32 M-HE35 3.5 .875 202 20 CSD20020H30 20 M-HE30 3 .875 162
18 CSD18032H40 32 M-HE40 4 1 210 20 CSD20024H30 24 M-HE30 3 .875 179
18 CSD18032H50 32 M-HE50 5 1 239 20 CSD20026H25 26 M-HE25 2.5 .75 181
18 CSD18034H35 34 M-HE35 3.5 .875 209 20 CSD20026H30 26 M-HE30 3 .875 188
18 CSD18036H50 36 M-HE50 5 1 255 20 CSD20026H35 26 M-HE35 3.5 .875 187
18 CSD18038H25 38 M-HE25 2.5 .75 220 20 CSD20026H40 26 M-HE40 4 1 196
18 CSD18038H30 38 M-HE30 3 .875 226 20 CSD20026H50 26 M-HE50 5 1 231
18 CSD18038H35 38 M-HE35 3.5 .875 225 20 CSD20028H25 28 M-HE25 2.5 .75 209
18 CSD18038H40 38 M-HE40 4 1 234 20 CSD20028H30 28 M-HE30 3 .875 215
18 CSD18038H45 38 M-HE45 4.5 1 254 20 CSD20028H35 28 M-HE35 3.5 .875 214
18 CSD18038H50 38 M-HE50 5 1 262 20 CSD20028H40 28 M-HE40 4 1 223
18 CSD18040H25 40 M-HE25 2.5 .75 243 20 CSD20028H50 28 M-HE50 5 1 256
18 CSD18040H35 40 M-HE35 3.5 .875 247 20 CSD20032H25 32 M-HE25 2.5 .75 227
18 CSD18040H40 40 M-HE40 4 1 255 20 CSD20032H30 32 M-HE30 3 .875 233
18 CSD18040H45 40 M-HE45 4.5 1 274 20 CSD20032H35 32 M-HE35 3.5 .875 232
18 CSD18040H50 40 M-HE50 5 1 282 20 CSD20032H40 32 M-HE40 4 1 241
18 CSD18044H30 44 M-HE30 3 .875 264 20 CSD20032H50 32 M-HE50 5 1 273
18 CSD18044H35 44 M-HE35 3.5 .875 263 20 CSD20034H25 34 M-HE25 2.5 .75 236
18 CSD18044H40 44 M-HE40 4 1 271 20 CSD20034H35 34 M-HE35 3.5 .875 241
18 CSD18044H45 44 M-HE45 4.5 1 290 20 CSD20034H40 34 M-HE40 4 1 250
18 CSD18044H50 44 M-HE50 5 1 298 20 CSD20034H45 34 M-HE45 4.5 1 273
18 CSD18044H60 44 M-HE60 6 1.125 326 20 CSD20036H70 36 M-HE70 7 1.25 325
18 CSD18046H45 46 M-HE45 4.5 1 342 20 CSD20038H25 38 M-HE25 2.5 .75 253
18 CSD18051H30 51 M-HE30 3 .875 342 20 CSD20038H30 38 M-HE30 3 .875 259
18 CSD18051H35 51 M-HE35 3.5 .875 341 20 CSD20038H35 38 M-HE35 3.5 .875 259
18 CSD18051H40 51 M-HE40 4 1 348 20 CSD20038H40 38 M-HE40 4 1 267
18 CSD18051H45 51 M-HE45 4.5 1 367 20 CSD20038H45 38 M-HE45 4.5 1 291
18 CSD18051H50 51 M-HE50 5 1 375 20 CSD20038H50 38 M-HE50 5 1 300
18 CSD18051H60 51 M-HE60 6 1.125 403 20 CSD20038H60 38 M-HE60 6 1.125 325
18 CSD18054H25 54 M-HE25 2.5 .75 352 20 CSD20040H25 40 M-HE25 2.5 .75 281
18 CSD18054H50 54 M-HE50 5 1 390 20 CSD20040H30 40 M-HE30 3 .875 286
18 CSD18057H25 57 M-HE25 2.5 .75 366 20 CSD20040H35 40 M-HE35 3.5 .875 286
18 CSD18057H30 57 M-HE30 3 .875 371 20 CSD20040H40 40 M-HE40 4 1 293
18 CSD18057H35 57 M-HE35 3.5 .875 371 20 CSD20040H45 40 M-HE45 4.5 1 316
18 CSD18057H40 57 M-HE40 4 1 378 20 CSD20040H50 40 M-HE50 5 1 324
18 CSD18057H45 57 M-HE45 4.5 1 397 20 CSD20044H30 44 M-HE30 3 .875 304
18 CSD18057H50 57 M-HE50 5 1 405 20 CSD20044H35 44 M-HE35 3.5 .875 303
18 CSD18057H60 57 M-HE60 6 1.125 433 20 CSD20044H40 44 M-HE40 4 1 311
18 CSD18063H25 63 M-HE25 2.5 .75 411 20 CSD20044H45 44 M-HE45 4.5 1 334
18 CSD18063H30 63 M-HE30 3 .875 415 20 CSD20046H35 46 M-HE35 3.5 .875 362
18 CSD18063H35 63 M-HE35 3.5 .875 414 20 CSD20046H50 46 M-HE50 5 1 400
18 CSD18063H40 63 M-HE40 4 1 420 20 CSD20051H25 51 M-HE25 2.5 .75 385
18 CSD18063H45 63 M-HE45 4.5 1 438 20 CSD20051H30 51 M-HE30 3 .875 390
18 CSD18063H50 63 M-HE50 5 1 445 20 CSD20051H35 51 M-HE35 3.5 .875 389
18 CSD18063H60 63 M-HE60 6 1.125 473 20 CSD20051H40 51 M-HE40 4 1 397
18 CSD18063H70 63 M-HE70 7 1.25 478 20 CSD20051H50 51 M-HE50 5 1 428
20 CSD20010H25 10 M-HE25 2.5 .75 110 20 CSD20054H50 54 M-HE50 5 1 444
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-23
Drum Pulleys
Standard Duty — M-HE Bushed
C A
B
Standard Duty Drum Pulleys — M-HE Bushed Standard Duty Drum Pulleys — M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
20 CSD20057H25 57 M-HE25 2.5 .75 418 24 CSD24038H45 38 M-HE45 4.5 1 372
20 CSD20057H30 57 M-HE30 3 .875 423 24 CSD24038H60 38 M-HE60 6 1.125 406
20 CSD20057H35 57 M-HE35 3.5 .875 422 24 CSD24038H70 38 M-HE70 7 1.25 416
20 CSD20057H40 57 M-HE40 4 1 430 24 CSD24040H25 40 M-HE25 2.5 .75 394
20 CSD20057H45 57 M-HE45 4.5 1 452 24 CSD24040H45 40 M-HE45 4.5 1 409
20 CSD20057H50 57 M-HE50 5 1 461 24 CSD24040H50 40 M-HE50 5 1 417
20 CSD20060H50 60 M-HE50 5 1 492 24 CSD24040H60 40 M-HE60 6 1.125 490
20 CSD20063H25 63 M-HE25 2.5 .75 470 24 CSD24040H70 40 M-HE70 7 1.25 447
20 CSD20063H30 63 M-HE30 3 .875 474 24 CSD24044H25 44 M-HE25 2.5 .75 415
20 CSD20063H35 63 M-HE35 3.5 .875 473 24 CSD24044H35 44 M-HE35 3.5 .875 417
20 CSD20063H40 63 M-HE40 4 1 480 24 CSD24044H40 44 M-HE40 4 1 424
20 CSD20063H45 63 M-HE45 4.5 1 501 24 CSD24044H45 44 M-HE45 4.5 1 430
20 CSD20063H50 63 M-HE50 5 1 509 24 CSD24044H50 44 M-HE50 5 1 440
20 CSD20063H60 63 M-HE60 6 1.125 530 24 CSD24044H60 44 M-HE60 6 1.125 461
20 CSD20063H70 63 M-HE70 7 1.25 541 24 CSD24044H70 44 M-HE70 7 1.25 468
20 CSD20066H40 66 M-HE40 4 1 588 24 CSD24044H80 44 M-HE80 8 1.5 505
20 CSD20066H70 66 M-HE70 7 1.25 646 24 CSD24046H40 46 M-HE40 4 1 494
20 CSD20076H40 76 M-HE40 4 1 655 24 CSD24046H45 46 M-HE45 4.5 1 500
20 CSD20076H45 76 M-HE45 4.5 1 676 24 CSD24046H50 46 M-HE50 5 1 508
20 CSD20087H35 87 M-HE35 3.5 .875 723 24 CSD24046H60 46 M-HE60 6 1.125 531
20 CSD20087H45 87 M-HE45 4.5 1 750 24 CSD24046H70 46 M-HE70 7 1.25 538
24 CSD24014H35 14 M-HE35 3.5 .875 203 24 CSD24051H25 51 M-HE25 2.5 .75 518
24 CSD24014H40 14 M-HE40 4 1 212 24 CSD24051H30 51 M-HE30 3 .875 521
24 CSD24026H25 26 M-HE25 2.5 .75 261 24 CSD24051H35 51 M-HE35 3.5 .875 520
24 CSD24026H30 26 M-HE30 3 .875 268 24 CSD24051H40 51 M-HE40 4 1 527
24 CSD24026H35 26 M-HE35 3.5 .875 267 24 CSD24051H45 51 M-HE45 4.5 1 533
24 CSD24026H40 26 M-HE40 4 276 24 CSD24051H50 51 M-HE50 5 1 541
24 CSD24026H50 26 M-HE50 5 293 24 CSD24051H60 51 M-HE60 6 1.125 564
24 CSD24028H25 28 M-HE25 2.5 .75 301 24 CSD24051H70 51 M-HE70 7 1.25 571
24 CSD24028H30 28 M-HE30 3 .875 306 24 CSD24054H25 54 M-HE25 2.5 .75 537
24 CSD24028H40 28 M-HE40 4 1 313 24 CSD24054H30 54 M-HE30 3 .875 541
24 CSD24028H50 28 M-HE50 5 1 328 24 CSD24054H50 54 M-HE50 5 1 561
24 CSD24028H60 28 M-HE60 6 1.125 354 24 CSD24054H60 54 M-HE60 6 1.125 584
24 CSD24030H40 30 M-HE40 4 1 323 24 CSD24054H70 54 M-HE70 7 1.25 591
24 CSD24032H25 32 M-HE25 2.5 .75 322 24 CSD24057H25 57 M-HE25 2.5 .75 557
24 CSD24032H30 32 M-HE30 3 .875 327 24 CSD24057H30 57 M-HE30 3 .875 561
24 CSD24032H35 32 M-HE35 3.5 .875 326 24 CSD24057H35 57 M-HE35 3.5 .875 560
24 CSD24032H40 32 M-HE40 4 1 334 24 CSD24057H45 57 M-HE45 4.5 1 572
24 CSD24032H45 32 M-HE45 4.5 1 341 24 CSD24057H50 57 M-HE50 5 1 580
24 CSD24032H50 32 M-HE50 5 1 349 24 CSD24057H60 57 M-HE60 6 1.125 603
24 CSD24032H70 32 M-HE70 7 1.25 384 24 CSD24057H70 57 M-HE70 7 1.25 610
24 CSD24032H80 32 M-HE80 8 1.5 424 24 CSD24057H80 57 M-HE80 8 1.5 647
24 CSD24034H30 34 M-HE30 3 .875 338 24 CSD24063H25 63 M-HE25 2.5 .75 625
24 CSD24034H45 34 M-HE45 4.5 1 351 24 CSD24063H35 63 M-HE35 3.5 .875 627
24 CSD24036H60 36 M-HE60 6 1.125 385 24 CSD24063H40 63 M-HE40 4 1 632
24 CSD24038H25 38 M-HE25 2.5 .75 354 24 CSD24063H45 63 M-HE45 4.5 1 637
24 CSD24038H30 38 M-HE30 3 .875 359 24 CSD24063H50 63 M-HE50 5 1 644
24 CSD24038H35 38 M-HE35 3.5 .875 358 24 CSD24063H60 63 M-HE60 6 1.125 665
24 CSD24038H40 38 M-HE40 4 1 366 24 CSD24063H70 63 M-HE70 7 1.25 670
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-24
Drum Pulleys
Standard Duty — M-HE Bushed
C A
B
Standard Duty Drum Pulleys — M-HE Bushed Standard Duty Drum Pulleys — M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
24 CSD24063H80 63 M-HE80 8 1.5 704 36 CSD36044H50 44 M-HE50 5 1 1003
24 CSD24066H50 66 M-HE50 5 1 779 36 CSD36044H70 44 M-HE70 7 1.25 1023
24 CSD24066H60 66 M-HE60 6 1.125 778 36 CSD36044H80 44 M-HE80 8 1.5 1055
24 CSD24066H70 66 M-HE70 7 1.25 800 36 CSD36046H50 46 M-HE50 5 1 1022
24 CSD24076H45 76 M-HE45 4.5 1 853 36 CSD36046H60 46 M-HE60 6 1.125 1041
24 CSD24087H45 87 M-HE45 4.5 1 941 36 CSD36051H40 51 M-HE40 4 1 930
30 CSD30016H40 16 M-HE40 4 1 509 36 CSD36051H45 51 M-HE45 4.5 1 936
30 CSD30032H35 32 M-HE35 3.5 .875 516 36 CSD36051H50 51 M-HE50 5 1 1072
30 CSD30032H40 32 M-HE40 4 1 523 36 CSD36051H60 51 M-HE60 6 1.125 1091
30 CSD30032H45 32 M-HE45 4.5 1 616 36 CSD36051H70 51 M-HE70 7 1.25 1092
30 CSD30032H50 32 M-HE50 5 1 638 36 CSD36051H80 51 M-HE80 8 1.5 1124
30 CSD30036H60 36 M-HE60 6 1.125 670 36 CSD36057H60 57 M-HE60 6 1.125 1260
30 CSD30038H40 38 M-HE40 4 1 566 36 CSD36057H70 57 M-HE70 7 1.25 1262
30 CSD30038H45 38 M-HE45 4.5 1 572 36 CSD36057H80 57 M-HE80 8 1.5 1293
30 CSD30038H60 38 M-HE60 6 1.125 687 36 CSD36060H40 60 M-HE40 4 1 1201
30 CSD30038H70 38 M-HE70 7 1.25 691 36 CSD36063H40 63 M-HE40 4 1 1237
30 CSD30040H50 40 M-HE50 5 1 717 36 CSD36063H50 63 M-HE50 5 1 1375
30 CSD30040H60 40 M-HE60 6 1.125 726 36 CSD36063H60 63 M-HE60 6 1.125 1392
30 CSD30040H70 40 M-HE70 7 1.25 745 36 CSD36063H70 63 M-HE70 7 1.25 1391
30 CSD30044H40 44 M-HE40 4 1 659 36 CSD36063H80 63 M-HE80 8 1.5 1420
30 CSD30044H50 44 M-HE50 5 1 757
30 CSD30044H60 44 M-HE60 6 1.125 776
30 CSD30044H70 44 M-HE70 7 1.25 778
30 CSD30044H80 44 M-HE80 8 1.5 810
30 CSD30046H30 46 M-HE30 3 .875 653
30 CSD30046H50 46 M-HE50 5 1 757
30 CSD30046H60 46 M-HE60 6 1.125 776
30 CSD30046H70 46 M-HE70 7 1.25 795
30 CSD30051H45 51 M-HE45 4.5 1 723
30 CSD30051H50 51 M-HE50 5 1 815
30 CSD30051H70 51 M-HE70 7 1.25 835
30 CSD30051H80 51 M-HE80 8 1.5 867
30 CSD30054H50 54 M-HE50 5 1 926
30 CSD30054H60 54 M-HE60 6 1.125 945
30 CSD30054H80 54 M-HE80 8 1.5 978
30 CSD30057H40 57 M-HE40 4 1 859 Custom Shafting Available!
30
30
CSD30057H45
CSD30057H50
57
57
M-HE45
M-HE50
4.5
5
1
1
865
956
Call !
30 CSD30057H60 57 M-HE60 6 1.125 974
30 CSD30057H70 57 M-HE70 7 1.25 977
30 CSD30057H80 57 M-HE80 8 1.5 1008
30 CSD30060H50 60 M-HE50 5 1 1027
30 CSD30063H35 63 M-HE35 3.5 .875 956
30 CSD30063H45 63 M-HE45 4.5 1 967
30 CSD30063H50 63 M-HE50 5 1 1057
30 CSD30063H60 63 M-HE60 6 1.125 1072
30 CSD30063H70 63 M-HE70 7 1.25 1073
30 CSD30063H80 63 M-HE80 8 1.5 1102
30 CSD30076H80 76 M-HE80 8 1.5 1273
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-25
Drum Pulleys
Standard Duty − M-HE Bushed (Lagged)
C A
B
Standard Duty Drum Pulleys − M-HE Bushed (Lagged) Standard Duty Drum Pulleys − M-HE Bushed (Lagged)
Approx. Approx.
Dia. Face Max Setback Dia. Face Max Setback
Part Number Hub Lagging Weight Part Number Hub Lagging Weight
A C Bore B* A C Bore B*
(lb) (lb)
6 CSD06020H25L3H 20 M-HE25 2.5 .75 .375 37 16 CSD16038H25L3H 38 M-HE25 2.5 .75 .375 192
6 CSD06032H25L3H 32 M-HE25 2.5 .75 .375 54 16 CSD16038H30L3H 38 M-HE30 3 .875 .375 198
8 CSD08026H25L3H 26 M-HE25 2.5 .75 .375 59 16 CSD16038H35L3H 38 M-HE35 3.5 .875 .375 197
8 CSD08032H25L3H 32 M-HE25 2.5 .75 .375 72 16 CSD16038H40L3H 38 M-HE40 4 1 .375 206
10 CSD10026H25L3H 26 M-HE25 2.5 .75 .375 83 16 CSD16044H30L3H 44 M-HE30 3 .875 .375 230
10 CSD10026H30L3H 26 M-HE30 3 .875 .375 84 16 CSD16051H35L3H 51 M-HE35 3.5 .875 .375 299
10 CSD10032H25L3H 32 M-HE25 2.5 .75 .375 94 16 CSD16063H35L3H 63 M-HE35 3.5 .875 .375 235
10 CSD10044H25L3H 44 M-HE25 2.5 .75 .375 132 18 CSD18026H30L3H 26 M-HE30 3 .875 .375 176
10 CSD10044H30L3H 44 M-HE30 3 .875 .375 125 18 CSD18026H35L3H 26 M-HE35 3.5 .875 .375 176
10 CSD10051H30L3H 51 M-HE30 3 .875 .375 148 18 CSD18026H40L3H 26 M-HE40 4 1 .375 176
12 CSD12020H25L3H 20 M-HE25 2.5 .75 .375 85 18 CSD18026H50L3H 26 M-HE50 5 1 .375 206
12 CSD12020H35L3H 20 M-HE35 3.5 .875 .375 85 18 CSD18032H30L3H 32 M-HE30 3 .875 .375 205
12 CSD12026H25L3H 26 M-HE25 2.5 .75 .375 95 18 CSD18032H35L3H 32 M-HE35 3.5 .875 .375 205
12 CSD12026H30L3H 26 M-HE30 3 .875 .375 102 18 CSD18032H40L3H 32 M-HE40 4 1 .375 213
12 CSD12032H25L3H 32 M-HE25 2.5 .75 .375 123 18 CSD18032H45L3H 32 M-HE45 4.5 1 .375 233
12 CSD12032H30L3H 32 M-HE30 2.5 .75 .375 123 18 CSD18038H30L3H 38 M-HE30 3 .875 .375 230
12 CSD12032H35L3H 32 M-HE35 3.5 .875 .375 117 18 CSD18038H35L3H 38 M-HE35 3.5 .875 .375 229
12 CSD12038H25L3H 38 M-HE25 2.5 .75 .375 133 18 CSD18038H40L3H 38 M-HE40 4 1 .375 238
12 CSD12038H30L3H 38 M-HE30 3 .875 .375 141 18 CSD18044H35L3H 44 M-HE35 3.5 .875 .375 267
12 CSD12038H35L3H 38 M-HE35 3.5 .875 .375 140 18 CSD18044H40L3H 44 M-HE40 4 1 .375 275
12 CSD12044H25L3H 44 M-HE25 2.5 .75 .375 155 18 CSD18051H35L3H 51 M-HE35 3.5 .875 .375 394
12 CSD12044H30L3H 44 M-HE30 3 .875 .375 163 20 CSD20026H30L3H 26 M-HE30 3 .875 .375 191
12 CSD12051H25L3H 51 M-HE25 2.5 .75 .375 174 20 CSD20026H35L3H 26 M-HE35 3.5 .875 .375 190
12 CSD12051H30L3H 51 M-HE30 3 .875 .375 182 20 CSD20026H40L3H 26 M-HE40 4 1 .375 200
14 CSD14020H30L3H 20 M-HE30 3 .875 .375 103 20 CSD20026H50L3H 26 M-HE50 5 1 .375 234
14 CSD14026H25L3H 26 M-HE25 2.5 .75 .375 115 20 CSD20032H30L3H 32 M-HE30 3 .875 .375 236
14 CSD14026H30L3H 26 M-HE30 3 .875 .375 122 20 CSD20032H35L3H 32 M-HE35 3.5 .875 .375 235
14 CSD14032H25L3H 32 M-HE25 2.5 .75 .375 143 20 CSD20032H40L3H 32 M-HE40 4 1 .375 244
14 CSD14032H30L3H 32 M-HE30 3 .875 .375 149 20 CSD20032H50L3H 32 M-HE50 5 1 .375 277
14 CSD14038H30L3H 38 M-HE30 3 .875 .375 168 20 CSD20038H30L3H 38 M-HE30 3 .875 .375 263
14 CSD14038H35L3H 38 M-HE35 3.5 .875 .375 167 20 CSD20038H35L3H 38 M-HE35 3.5 .875 .375 262
14 CSD14044H25L3H 44 M-HE25 2.5 .75 .375 189 20 CSD20038H40L3H 38 M-HE40 4 1 .375 271
14 CSD14044H30L3H 44 M-HE30 3 .875 .375 194 20 CSD20044H40L3H 44 M-HE40 4 1 .375 315
14 CSD14044H35L3H 44 M-HE35 3.5 .875 .375 193 20 CSD20051H40L3H 51 M-HE40 4 1 .375 402
14 CSD14051H30L3H 51 M-HE30 3 .875 .375 216 24 CSD24026H35L3H 26 M-HE35 3.5 .875 .375 270
14 CSD14051H35L3H 51 M-HE35 3.5 .875 .375 215 24 CSD24026H40L3H 26 M-HE40 4 1 .375 279
14 CSD14051H40L3H 51 M-HE40 4 1 .375 226 24 CSD24026H45L3H 26 M-HE45 4.5 1 .375 286
14 CSD14063H35L3H 63 M-HE35 3.5 .875 .375 356 24 CSD24032H30L3H 32 M-HE30 3 .875 .375 331
16 CSD16020H30L3H 20 M-HE30 3 .875 .375 122 24 CSD24032H35L3H 32 M-HE35 3.5 .875 .375 330
16 CSD16026H25L3H 26 M-HE25 2.5 .75 .375 144 24 CSD24032H40L3H 32 M-HE40 4 1 .375 338
16 CSD16026H30L3H 26 M-HE30 3 .875 .375 144 24 CSD24032H45L3H 32 M-HE45 4.5 1 .375 344
16 CSD16026H35L3H 26 M-HE35 3.5 .875 .375 143 24 CSD24038H35L3H 38 M-HE35 3.5 .875 .375 263
16 CSD16026H40L2H 26 M-HE40 4 1 .25 152 24 CSD24038H40L3H 38 M-HE40 4 1 .375 270
16 CSD16026H40L3H 26 M-HE40 4 1 .375 153 24 CSD24038H45L3H 38 M-HE45 4.5 1 .375 277
16 CSD16032H30L3H 32 M-HE30 3 .875 .375 175 24 CSD24044H40L3H 44 M-HE40 4 1 .375 429
16 CSD16032H35L3H 32 M-HE35 3.5 .875 .375 175 24 CSD24044H45L3H 44 M-HE45 4.5 1 .375 435
16 CSD16032H40L3H 32 M-HE40 4 1 .375 184 24 CSD24051H40L3H 51 M-HE40 4 1 .375 533
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-26
Drum Pulleys
Mine Duty
offers Mine Duty Drum Pulleys using a minimum .375" rim (up to
20" diameter), .5" minimum rim on 24" and larger diameter, 1" minimum
end discs and .375" center discs. Each Mine Duty Drum Pulley features
a rolled rim, which has been fabricated on either flat or custom crowned
roll machines. The rims are trimmed and hydraulically seated around the
heavy end discs to ensure maximum concentricity. Once the Pulley is
formed, utilizes a double or triple pass submerged arc weldment
to ensure optimum connection of its individual components.
Features:
• 10" to 60" Diameter
• .375" Minimum Rim Thickness
• 1", 1.25",and Heavier End Discs
• .375" Center Plates
• Several Hub/Bushing Systems Available
A
• Double Sub-Arc Weldments
's Mine Duty Drum Pulleys are manufactured with Crown face.
Flat face available upon request.
Mine Duty Drum Pulleys (Lagged) Mine Duty Drum Pulleys (Lagged)
Approx. Approx.
Dia. Face Max Setback Dia. Face Max Setback
Part Number Hub Lagging Weight Part Number Hub Lagging Weight
A C Bore B* A C Bore B*
(lb) (lb)
12 CMD12032X30L3H 32 MXT30 3 .875 .375 178 18 CMD18044X40L3H 44 MXT40 4 1 .375 436
12 CMD12038X30L3H 38 MXT30 3 .875 .375 202 18 CMD18044X40L4H 44 MXT40 4 1 .5 438
12 CMD12040X40L3H 40 MXT40 4 1 .375 219 18 CMD18044X45L4H 44 MXT45 4.5 1 .5 438
12 CMD12044X30L3H 44 MXT30 3 .875 .375 235 18 CMD18046X50L3H 46 MXT50 5 1 .375 448
12 CMD12051X35L4H 51 MXT35 3.5 .875 .5 273 18 CMD18051X45L4H 51 MXT45 4.5 1 .5 480
14 CMD14032X30L3H 32 MXT30 3 .875 .375 246 20 CMD20026X35L4H 26 MXT35 3.5 .875 .5 337
14 CMD14038X35L4H 38 MXT35 3.5 .875 .5 265 20 CMD20032X35L4H 32 MXT35 3.5 .875 .5 404
14 CMD14038X40L3H 38 MXT40 4 1 .375 269 20 CMD20032X40L3H 32 MXT40 4 1 .375 405
16 CMD16026X35L4H 26 MXT35 3.5 .875 .5 241 20 CMD20032X40L4H 32 MXT40 4 1 .5 407
16 CMD16032X35L4H 32 MXT35 3.5 .875 .5 288 20 CMD20038X40L3H 38 MXT40 4 1 .375 445
16 CMD16032X40L3H 32 MXT40 4 1 .375 290 20 CMD20038X40L4H 38 MXT40 4 1 .5 447
16 CMD16038X25L4H 38 MXT25 2.5 .75 .5 322 20 CMD20044X40L4H 44 MXT40 4 1 .5 512
16 CMD16038X30L3H 38 MXT30 3 .875 .375 330 20 CMD20044X45L3H 44 MXT45 4.5 1 .375 510
16 CMD16038X30L4H 38 MXT30 3 .875 .5 331 20 CMD20044X45L4H 44 MXT45 4 1 .5 512
16 CMD16038X35L4H 38 MXT35 3 .875 .5 331 20 CMD20046X50L3H 46 MXT50 5 1 .375 524
16 CMD16040X50L3H 40 MXT50 5 1 .375 345 20 CMD20051X45L4H 51 MXT45 4.5 1 .5 559
16 CMD16044X35L4H 44 MXT35 3.5 .875 .5 368 20 CMD20057X50L4H 57 MXT50 5 1 .5 598
16 CMD16044X40L3H 44 MXT40 4 1 .375 367 24 CMD24032X40L3H 32 MXT40 4 1 .375 668
16 CMD16044X40L4H 44 MXT40 4 1 .5 368 24 CMD24032X45L4H 32 MXT45 4.5 1 .5 670
16 CMD16046X35L3H 46 MXT35 5 1 .375 377 24 CMD24038X40L3H 38 MXT40 4 1 .375 732
16 CMD16051X40L4H 51 MXT40 4 1 .5 406 24 CMD24038X45L4H 38 MXT45 4.5 1 .5 774
18 CMD18032X30L3H 32 MXT30 3 .875 .375 353 24 CMD24040X50L3H 40 MXT50 5 1 .375 791
18 CMD18032X35L4H 32 MXT35 3.5 .875 .5 344 24 CMD24044X45L3H 44 MXT45 4.5 1 .375 834
18 CMD18038X35L4H 38 MXT35 3.5 .875 .5 380 24 CMD24044X45L4H 44 MXT45 4.5 1 .5 836
18 CMD18038X40L3H 38 MXT40 4 1 .375 381 24 CMD24046X60L3H 46 MXT60 4.5 1.125 .375 855
18 CMD18040X45L3H 40 MXT45 4.5 1 .375 412 24 CMD24051X50L4H 51 MXT50 5 1 .5 907
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-37
Drum Pulleys
Mine Duty — M-HE Bushed
C A
B
Mine Duty Drum Pulleys – M-HE Bushed Mine Duty Drum Pulleys – M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
10 CMD10026H30 26 M-HE30 3 .875 111 16 CMD16032H40 32 M-HE40 4 1 286
10 CMD10032H30 32 M-HE30 3 .875 136 16 CMD16038H30 38 M-HE30 3 .875 316
10 CMD10044H30 44 M-HE30 3 .875 181 16 CMD16038H35 38 M-HE35 3.5 .875 315
10 CMD10051H35 51 M-HE35 3.5 .875 202 16 CMD16038H40 38 M-HE40 4 1 618
12 CMD12026H30 26 M-HE30 3 .875 148 16 CMD16038H45 38 M-HE45 4.5 1 322
12 CMD12026H35 26 M-HE35 3.5 .875 147 16 CMD16038H50 38 M-HE50 5 1 329
12 CMD12026H40 26 M-HE40 4 1 153 16 CMD16040H30 40 M-HE30 3 .875 342
12 CMD12032H30 32 M-HE30 3 .875 180 16 CMD16040H35 40 M-HE35 3.5 .875 341
12 CMD12032H35 32 M-HE35 3.5 .875 178 16 CMD16040H40 40 M-HE40 4 1 342
12 CMD12032H40 32 M-HE40 4 1 184 16 CMD16040H50 40 M-HE50 5 1 353
12 CMD12038H30 38 M-HE30 3 .875 204 16 CMD16044H30 44 M-HE30 3 .875 363
12 CMD12038H35 38 M-HE35 3.5 .875 202 16 CMD16044H35 44 M-HE35 3.5 .875 362
12 CMD12038H40 38 M-HE40 4 1 208 16 CMD16044H40 44 M-HE40 4 1 363
12 CMD12040H40 40 M-HE40 4 1 222 16 CMD16044H50 44 M-HE50 5 1 374
12 CMD12044H30 44 M-HE30 3 .875 236 16 CMD16046H40 46 M-HE40 4 1 373
12 CMD12044H35 44 M-HE35 3.5 .875 233 16 CMD16046H50 46 M-HE50 5 1 385
12 CMD12046H30 46 M-HE30 3 .875 244 16 CMD16051H30 51 M-HE30 3 .875 400
12 CMD12051H30 51 M-HE30 3 .875 263 16 CMD16051H35 51 M-HE35 3.5 .875 399
12 CMD12051H35 51 M-HE35 3.5 .875 261 16 CMD16051H40 51 M-HE40 4 1 400
12 CMD12051H40 51 M-HE40 4 1 266 16 CMD16051H45 51 M-HE45 4.5 1 403
12 CMD12057H30 57 M-HE30 3 .875 287 16 CMD16051H50 51 M-HE50 5 1 411
12 CMD12057H35 57 M-HE35 3.5 .875 285 16 CMD16054H40 54 M-HE40 4 1 415
12 CMD12057H45 57 M-HE45 4.5 1 293 16 CMD16057H40 57 M-HE40 4 1 431
12 CMD12063H30 63 M-HE30 3 .875 319 16 CMD16057H45 57 M-HE45 4.5 1 434
12 CMD12063H35 63 M-HE35 3.5 .875 316 16 CMD16057H60 57 M-HE60 6 1.125 458
14 CMD14026H30 26 M-HE30 3 .875 195 16 CMD16063H30 63 M-HE30 3 .875 477
14 CMD14026H35 26 M-HE35 3.5 .875 195 16 CMD16063H35 63 M-HE35 3.5 .875 477
14 CMD14032H30 32 M-HE30 3 .875 233 16 CMD16063H40 63 M-HE40 4 1 476
14 CMD14032H35 32 M-HE35 3.5 .875 233 16 CMD16063H45 63 M-HE45 4.5 1 478
14 CMD14032H40 32 M-HE40 4 1 237 18 CMD18026H35 26 M-HE35 3.5 .875 283
14 CMD14038H30 38 M-HE30 3 .875 261 18 CMD18026H40 26 M-HE40 4 1 287
14 CMD14038H35 38 M-HE35 3.5 .875 260 18 CMD18026H45 26 M-HE45 4.5 1 292
14 CMD14038H40 38 M-HE40 4 1 265 18 CMD18026H50 26 M-HE50 5 1 298
14 CMD14040H30 40 M-HE30 3 .875 281 18 CMD18032H30 32 M-HE30 3 .875 340
14 CMD14044H30 44 M-HE30 3 .875 299 18 CMD18032H35 32 M-HE35 3.5 .875 339
14 CMD14044H35 44 M-HE35 3.5 .875 298 18 CMD18032H40 32 M-HE40 4 1 342
14 CMD14044H40 44 M-HE40 4 1 303 18 CMD18032H45 32 M-HE45 4.5 1 346
14 CMD14046H40 46 M-HE40 4 1 313 18 CMD18036H40 36 M-HE40 4 1 365
14 CMD14051H30 51 M-HE30 3 .875 331 18 CMD18036H50 36 M-HE50 5 1 374
14 CMD14051H35 51 M-HE35 3.5 .875 330 18 CMD18038H30 38 M-HE30 3 .875 376
14 CMD14051H40 51 M-HE40 4 1 336 18 CMD18038H35 38 M-HE35 3.5 .875 378
14 CMD14051H50 51 M-HE50 5 1 343 18 CMD18038H40 38 M-HE40 4 1 377
14 CMD14063H30 63 M-HE30 3 .875 396 18 CMD18038H45 38 M-HE45 4.5 1 381
14 CMD14063H35 63 M-HE35 3.5 .875 396 18 CMD18038H50 38 M-HE50 5 1 386
16 CMD16020H30 20 M-HE30 3 .875 206 18 CMD18040H30 40 M-HE30 3 .875 408
16 CMD16026H30 26 M-HE30 3 .875 238 18 CMD18040H35 40 M-HE35 3.5 .875 407
16 CMD16026H35 26 M-HE35 3.5 .875 237 18 CMD18040H40 40 M-HE40 4 1 408
16 CMD16032H30 32 M-HE30 3 .875 285 18 CMD18040H45 40 M-HE45 4.5 1 411
16 CMD16032H35 32 M-HE35 3.5 .875 284 18 CMD18044H30 44 M-HE30 3 .875 431
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-38
Drum Pulleys
Mine Duty — M-HE Bushed
C A
B
Mine Duty Drum Pulleys – M-HE Bushed Mine Duty Drum Pulleys – M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
18 CMD18044H35 44 M-HE35 3.5 .875 431 20 CMD20044H35 44 M-HE35 3.5 .875 504
18 CMD18044H40 44 M-HE40 4 1 432 20 CMD20044H40 44 M-HE40 4 1 505
18 CMD18044H45 44 M-HE45 4.5 1 435 20 CMD20044H45 44 M-HE45 4.5 1 508
18 CMD18044H50 44 M-HE50 5 1 438 20 CMD20044H50 44 M-HE50 5 1 512
18 CMD18044H60 44 M-HE60 6 1.125 458 20 CMD20044H60 44 M-HE60 6 1.125 525
18 CMD18046H30 46 M-HE30 3 .875 443 20 CMD20046H35 46 M-HE35 3.5 .875 517
18 CMD18046H35 46 M-HE35 3.5 .875 443 20 CMD20046H40 46 M-HE40 4 1 518
18 CMD18046H40 46 M-HE40 4 1 443 20 CMD20046H45 46 M-HE45 4.5 1 521
18 CMD18046H45 46 M-HE45 4.5 1 446 20 CMD20046H50 46 M-HE50 5 1 525
18 CMD18046H50 46 M-HE50 5 1 450 20 CMD20046H60 46 M-HE60 6 1.125 538
18 CMD18051H30 51 M-HE30 3 .875 473 20 CMD20051H30 51 M-HE30 3 .875 551
18 CMD18051H35 51 M-HE35 3.5 .875 472 20 CMD20051H35 51 M-HE35 3.5 .875 550
18 CMD18051H40 51 M-HE40 4 1 473 20 CMD20051H40 51 M-HE40 4 1 551
18 CMD18051H45 51 M-HE45 4.5 1 476 20 CMD20051H45 51 M-HE45 4.5 1 554
18 CMD18051H50 51 M-HE50 5 1 479 20 CMD20051H50 51 M-HE50 5 1 558
18 CMD18051H60 51 M-HE60 6 1.125 500 20 CMD20051H60 51 M-HE60 6 1.125 561
18 CMD18057H35 57 M-HE35 3.5 .875 507 20 CMD20051H70 51 M-HE70 7 1.25 571
18 CMD18057H40 57 M-HE40 4 1 508 20 CMD20054H40 54 M-HE40 4 1 571
18 CMD18057H45 57 M-HE45 4.5 1 511 20 CMD20054H45 54 M-HE45 4.5 1 574
18 CMD18057H50 57 M-HE50 5 1 515 20 CMD20054H50 54 M-HE50 5 1 577
18 CMD18057H60 57 M-HE60 6 1.125 535 20 CMD20054H70 54 M-HE70 7 1.25 592
18 CMD18063H35 63 M-HE35 3.5 .875 563 20 CMD20057H40 57 M-HE40 4 1 590
18 CMD18063H40 63 M-HE40 4 1 562 20 CMD20057H45 57 M-HE45 4.5 1 593
18 CMD18063H45 63 M-HE45 4.5 1 564 20 CMD20057H50 57 M-HE50 5 1 597
18 CMD18063H50 63 M-HE50 5 1 566 20 CMD20057H60 57 M-HE60 6 1.125 610
18 CMD18066H50 66 M-HE50 5 1 617 20 CMD20063H40 63 M-HE40 4 1 654
20 CMD20024H60 24 M-HE60 6 1.125 354 20 CMD20063H45 63 M-HE45 4.5 1 656
20 CMD20024H70 24 M-HE70 7 1.25 356 20 CMD20063H50 63 M-HE50 5 1 658
20 CMD20024H80 24 M-HE80 8 1.5 387 20 CMD20063H60 63 M-HE60 6 1.125 668
20 CMD20026H30 26 M-HE30 3 .875 334 20 CMD20063H70 63 M-HE70 7 1.25 669
20 CMD20026H35 26 M-HE35 3.5 .875 333 24 CMD24026H30 26 M-HE30 3 .875 561
20 CMD20026H40 26 M-HE40 4 1 337 24 CMD24026H35 26 M-HE35 3.5 .875 560
20 CMD20032H30 32 M-HE30 3 .875 400 24 CMD24026H40 26 M-HE40 4 1 562
20 CMD20032H35 32 M-HE35 3.5 .875 399 24 CMD24026H60 26 M-HE60 6 1.125 585
20 CMD20032H40 32 M-HE40 4 1 401 24 CMD24032H30 32 M-HE30 3 .875 664
20 CMD20032H45 32 M-HE45 4.5 1 405 24 CMD24032H35 32 M-HE35 3.5 .875 663
20 CMD20038H30 38 M-HE30 3 .875 439 24 CMD24032H40 32 M-HE40 4 1 664
20 CMD20038H35 38 M-HE35 3.5 .875 438 24 CMD24032H45 32 M-HE45 4.5 1 666
20 CMD20038H40 38 M-HE40 4 1 441 24 CMD24032H50 32 M-HE50 5 1 670
20 CMD20038H45 38 M-HE45 4.5 1 445 24 CMD24032H60 32 M-HE60 6 1.125 681
20 CMD20038H50 38 M-HE50 5 1 450 24 CMD24036H60 36 M-HE60 6 1.125 710
20 CMD20038H60 38 M-HE60 6 1.125 466 24 CMD24036H70 36 M-HE70 7 1.25 716
20 CMD20040H30 40 M-HE30 3 .875 479 24 CMD24036H80 36 M-HE80 8 1.5 739
20 CMD20040H35 40 M-HE35 3.5 .875 478 24 CMD24038H30 38 M-HE30 3 .875 727
20 CMD20040H40 40 M-HE40 4 1 479 24 CMD24038H35 38 M-HE35 3.5 .875 727
20 CMD20040H45 40 M-HE45 4.5 1 482 24 CMD24038H40 38 M-HE40 4 1 727
20 CMD20040H50 40 M-HE50 5 1 485 24 CMD24038H45 38 M-HE45 4.5 1 730
20 CMD20040H60 40 M-HE60 6 1.125 498 24 CMD24038H50 38 M-HE50 5 1 733
20 CMD20044H30 44 M-HE30 3 .875 505 24 CMD24038H60 38 M-HE60 6 1.125 745
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-39
Drum Pulleys
Mine Duty — M-HE Bushed
C A
B
Mine Duty Drum Pulleys – M-HE Bushed Mine Duty Drum Pulleys – M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
24 CMD24040H35 40 M-HE35 3.5 .875 787 30 CMD30038H50 38 M-HE50 5 1 1033
24 CMD24040H40 40 M-HE40 4 1 786 30 CMD30038H60 38 M-HE60 6 1.125 1044
24 CMD24040H45 40 M-HE45 4.5 1 788 30 CMD30038H70 38 M-HE70 7 1.25 1037
24 CMD24040H50 40 M-HE50 5 1 790 30 CMD30040H50 40 M-HE50 5 1 1120
24 CMD24044H30 44 M-HE30 3 .875 830 30 CMD30044H40 44 M-HE40 4 1 1169
24 CMD24044H35 44 M-HE35 3.5 .875 830 30 CMD30044H45 44 M-HE45 4.5 1 1171
24 CMD24044H40 44 M-HE40 4 1 828 30 CMD30044H50 44 M-HE50 5 1 1173
24 CMD24044H45 44 M-HE45 4.5 1 830 30 CMD30044H60 44 M-HE60 6 1.125 1182
24 CMD24044H50 44 M-HE50 5 1 832 30 CMD30044H70 44 M-HE70 7 1.25 1170
24 CMD24044H60 44 M-HE60 6 1.125 840 30 CMD30046H60 46 M-HE60 6 1.125 1208
24 CMD24044H70 44 M-HE70 7 1.25 845 30 CMD30046H80 46 M-HE80 8 1.5 1215
24 CMD24046H35 46 M-HE35 3.5 .875 850 30 CMD30051H40 51 M-HE40 4 1 1261
24 CMD24046H40 46 M-HE40 4 1 849 30 CMD30051H45 51 M-HE45 4.5 1 1263
24 CMD24046H45 46 M-HE45 4.5 1 851 30 CMD30051H50 51 M-HE50 5 1 1265
24 CMD24046H50 46 M-HE50 5 1 853 30 CMD30051H60 51 M-HE60 6 1.125 1274
24 CMD24046H60 46 M-HE60 6 1.125 861 30 CMD30051H70 51 M-HE70 7 1.25 1262
24 CMD24051H30 51 M-HE30 3 .875 904 30 CMD30051H80 51 M-HE80 8 1.5 1281
24 CMD24051H35 51 M-HE35 3.5 .875 903 30 CMD30054H60 54 M-HE60 6 1.125 1313
24 CMD24051H40 51 M-HE40 4 1 901 30 CMD30057H50 57 M-HE50 5 1 1344
24 CMD24051H45 51 M-HE45 4.5 1 903 30 CMD30057H60 57 M-HE60 6 1.125 1353
24 CMD24051H50 51 M-HE50 5 1 905 30 CMD30057H70 57 M-HE70 7 1.25 1341
24 CMD24051H60 51 M-HE60 6 1.125 914 30 CMD30063H45 63 M-HE45 4.5 1 1483
24 CMD24051H70 51 M-HE70 7 1.25 902 30 CMD30063H50 63 M-HE50 5 1 1848
24 CMD24054H40 54 M-HE40 4 1 933 30 CMD30063H60 63 M-HE60 6 1.125 1489
24 CMD24054H45 54 M-HE45 4.5 1 935 30 CMD30063H70 63 M-HE70 7 1.25 1474
24 CMD24054H50 54 M-HE50 5 1 937 30 CMD30063H80 63 M-HE80 8 1.5 1489
24 CMD24054H60 54 M-HE60 6 1.125 946 32 CMD32032H60 32 M-HE60 6 1.125 1070
24 CMD24054H70 54 M-HE70 7 1.25 939 36 CMD36038H70 38 M-HE70 7 1.25 1383
24 CMD24057H35 57 M-HE35 3.5 .875 966 36 CMD36044H45 44 M-HE45 4.5 1 1565
24 CMD24057H40 57 M-HE40 4 1 964 36 CMD36044H50 44 M-HE50 5 1 1566
24 CMD24057H45 57 M-HE45 4.5 1 966 36 CMD36044H60 44 M-HE60 6 1.125 1575
24 CMD24057H50 57 M-HE50 5 1 968 36 CMD36044H70 44 M-HE70 7 1.25 1564
24 CMD24057H60 57 M-HE60 6 1.125 977 36 CMD36044H80 44 M-HE80 8 1.5 1583
24 CMD24057H70 57 M-HE70 7 1.25 965 36 CMD36046H80 46 M-HE80 8 1.5 1614
24 CMD24057H80 57 M-HE80 8 1.5 984 36 CMD36051H50 51 M-HE50 5 1 1677
24 CMD24063H35 63 M-HE35 3.5 .875 1068 36 CMD36051H60 51 M-HE60 6 1.125 1687
24 CMD24063H40 63 M-HE40 4 1 1065 36 CMD36051H70 51 M-HE70 7 1.25 1674
24 CMD24063H45 63 M-HE45 4.5 1 1066 36 CMD36051H80 51 M-HE80 8 1.5 1693
24 CMD24063H50 63 M-HE50 5 1 1067 36 CMD36054H60 54 M-HE60 6 1.125 1733
24 CMD24063H60 63 M-HE60 6 1.125 1072 36 CMD36057H60 57 M-HE60 6 1.125 1780
24 CMD24063H70 63 M-HE70 7 1.25 1057 36 CMD36063H60 63 M-HE60 6 1.125 1965
24 CMD24063H80 63 M-HE80 8 1.5 1072 36 CMD36063H70 63 M-HE70 7 1.25 1949
30 CMD30032H30 32 M-HE30 3 .875 948 36 CMD36063H80 63 M-HE80 8 1.5 1964
30 CMD30032H35 32 M-HE35 3.5 .875 947
30 CMD30032H40 32 M-HE40 4 1 948
30 CMD30032H45 32 M-HE45 4.5 1 950
30 CMD30036H70 36 M-HE70 7 1.25 1010
30 CMD30038H40 38 M-HE40 4 1 1027
30 CMD30038H45 38 M-HE45 4.5 1 1029
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-40
Drum Pulleys
Mine Duty — M-HE Bushed (Lagged)
C A
B
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-41
Drum Pulleys
Quarry Duty
offers Quarry Duty Drum Pulleys using a minimum .5" rim, 1.25"
end discs, and .5" center discs, as well as an additional center disc. Each
Quarry Duty Drum Pulley features a rolled rim, which has been fabricated
on either of our flat or custom crowned roll machines. The rims are
trimmed and hydraulically seated around the heavy end discs to ensure
maximum concentricity. Once the Pulley is formed, utilizes
a double or triple pass submerged arc weldment to ensure optimum
connection of its individual components.
Features:
• 12" to 60" Diameter
• .5" Minimum Rim Thickness
• 1.25" and Heavier End Discs
• .5" Center Plates
• Full Depth Key Bushings
C A
• Double Sub-Arc Weldments
B
B A
B A
B A
B A
B A
B A
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-50
Wing Pulleys
Standard Duty — M-HE Bushed
A
C
B A
Standard Duty Wing Pulleys – M-HE Bushed Standard Duty Wing Pulleys – M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
8 CSW08020H25 20 M-HE25 2.5 2.649 65 14 CSW14026H35 26 M-HE35 3.5 3.136 139
8 CSW08026H25 26 M-HE25 2.5 2.649 71 14 CSW14032H25 32 M-HE25 2.5 2.649 170
8 CSW08028H25 28 M-HE25 2.5 2.649 76 14 CSW14032H30 32 M-HE30 3 2.932 169
8 CSW08030H25 30 M-HE25 2.5 2.629 81 14 CSW14034H25 34 M-HE25 2.5 2.649 181
8 CSW08032H25 32 M-HE25 2.5 2.649 86 14 CSW14034H30 34 M-HE30 3 2.932 179
8 CSW08038H25 38 M-HE25 2.5 2.649 103 14 CSW14036H30 36 M-HE30 3 2.932 189
8 CSW08051H25 51 M-HE25 2.5 2.649 138 14 CSW14038H25 38 M-HE25 2.5 2.649 202
8 CSW08063H25 63 M-HE25 2.5 2.649 171 14 CSW14038H30 38 M-HE30 3 2.932 198
8 CSW08063H30 63 M-HE30 3 2.932 258 14 CSW14038H40 38 M-HE40 4 3.261 198
10 CSW10020H25 20 M-HE25 2.5 2.649 67 14 CSW14038H45 38 M-HE45 4.5 3.636 206
10 CSW10026H25 26 M-HE25 2.5 2.649 86 14 CSW14038H50 38 M-HE50 5 4.061 231
10 CSW10026H30 26 M-HE30 3 2.932 93 14 CSW14044H25 44 M-HE25 2.5 2.649 235
10 CSW10032H25 32 M-HE25 2.5 2.649 105 14 CSW14044H30 44 M-HE30 3 2.932 227
10 CSW10038H25 38 M-HE25 2.5 2.649 127 14 CSW14044H40 44 M-HE40 4 3.261 223
10 CSW10038H35 38 M-HE35 3.5 3.136 132 14 CSW14046H30 46 M-HE30 3 2.932 236
10 CSW10044H25 44 M-HE25 2.5 2.649 146 14 CSW14051H25 51 M-HE25 2.5 2.649 275
10 CSW10044H30 44 M-HE30 3 2.932 148 14 CSW14051H30 51 M-HE30 3 2.932 267
10 CSW10051H25 51 M-HE25 2.5 2.649 171 14 CSW14051H40 51 M-HE40 4 3.261 264
10 CSW10051H30 51 M-HE30 3 2.932 179 14 CSW14051H45 51 M-HE45 4.5 3.636 272
10 CSW10051H35 51 M-HE35 3.5 3.136 175 14 CSW14054H30 54 M-HE30 3 2.932 282
10 CSW10057H30 57 M-HE30 3 2.932 190 14 CSW14057H30 57 M-HE30 3 2.932 296
10 CSW10057H35 57 M-HE35 3.5 3.136 191 14 CSW14057H35 57 M-HE35 3.5 3.136 294
10 CSW10063H25 63 M-HE25 2.5 2.649 212 14 CSW14057H40 57 M-HE40 4 3.261 289
10 CSW10063H30 63 M-HE30 3 2.933 213 14 CSW14063H25 63 M-HE25 2.5 2.649 343
10 CSW10063H35 63 M-HE35 3.5 3.136 215 14 CSW14063H30 63 M-HE30 3 2.932 331
12 CSW12020H25 20 M-HE25 2.5 2.649 85 14 CSW14063H35 63 M-HE35 3.5 3.136 329
12 CSW12026H25 26 M-HE25 2.5 2.649 110 14 CSW14063H40 63 M-HE40 4 3.261 326
12 CSW12026H30 26 M-HE30 3 2.932 115 16 CSW16020H25 20 M-HE25 2.5 2.649 120
12 CSW12026H35 26 M-HE35 3.5 3.136 114 16 CSW16022H30 22 M-HE30 3 2.932 137
12 CSW12028H25 28 M-HE25 2.5 2.649 118 16 CSW16026H25 26 M-HE25 2.5 2.649 156
12 CSW12032H25 32 M-HE25 2.5 2.649 135 16 CSW16026H30 26 M-HE30 3 2.932 159
12 CSW12032H30 32 M-HE30 3 2.932 137 16 CSW16028H25 28 M-HE25 2.5 2.649 169
12 CSW12038H25 38 M-HE25 2.5 2.649 160 16 CSW16028H30 28 M-HE30 3 2.932 170
12 CSW12038H30 38 M-HE30 3 2.932 159 16 CSW16028H35 28 M-HE35 3.5 3.136 168
12 CSW12038H35 38 M-HE35 3.5 3.136 158 16 CSW16032H25 32 M-HE25 2.5 2.649 194
12 CSW12038H40 38 M-HE40 4 3.261 162 16 CSW16032H30 32 M-HE30 3 2.932 200
12 CSW12044H25 44 M-HE25 2.5 2.649 186 16 CSW16038H25 38 M-HE25 2.5 2.649 231
12 CSW12044H30 44 M-HE30 3 2.932 181 16 CSW16038H30 38 M-HE30 3 2.932 226
12 CSW12044H35 44 M-HE35 3.5 3.136 180 16 CSW16038H35 38 M-HE35 3.5 3.136 224
12 CSW12044H40 44 M-HE40 4 3.261 181 16 CSW16038H45 38 M-HE45 4.5 3.636 233
12 CSW12051H25 51 M-HE25 2.5 2.649 218 16 CSW16040H40 40 M-HE40 4 3.261 235
12 CSW12051H30 51 M-HE30 3 2.932 214 16 CSW16040H45 40 M-HE45 4.5 3.636 243
12 CSW12051H35 51 M-HE35 3.5 3.136 212 16 CSW16044H25 44 M-HE25 2.5 2.649 268
12 CSW12057H35 57 M-HE35 3.5 3.136 234 16 CSW16044H30 44 M-HE30 3 2.932 260
12 CSW12063H25 63 M-HE25 2.5 2.649 285 16 CSW16044H35 44 M-HE35 3.5 3.136 257
14 CSW14026H25 26 M-HE25 2.5 2.649 138 16 CSW16044H40 44 M-HE40 4 3.261 255
14 CSW14026H30 26 M-HE30 3 2.932 141 16 CSW16044H45 44 M-HE45 4.5 3.636 263
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-51
Wing Pulleys
Standard Duty — M-HE Bushed
A
C
B A
Standard Duty Wing Pulleys – M-HE Bushed Standard Duty Wing Pulleys – M-HE Bushed
Approx. Approx.
Diameter Face Max Setback Diameter Face Max Setback
Part Number Hub Weight Part Number Hub Weight
A C Bore B* A C Bore B*
(lb) (lb)
16 CSW16051H30 51 M-HE30 3 2.932 306 20 CSW20026H30 26 M-HE30 3 2.932 255
16 CSW16051H35 51 M-HE35 3.5 3.136 303 20 CSW20026H40 26 M-HE40 4 3.261 264
16 CSW16051H40 51 M-HE40 4 3.261 302 20 CSW20028H30 28 M-HE30 3 2.932 272
16 CSW16051H45 51 M-HE45 4.5 3.636 310 20 CSW20028H35 28 M-HE35 3.5 3.136 270
16 CSW16057H40 57 M-HE40 4 3.261 332 20 CSW20030H40 30 M-HE40 4 3.261 301
16 CSW16057H45 57 M-HE45 4.5 3.363 340 20 CSW20032H25 32 M-HE25 2.5 2.649 306
16 CSW16063H25 63 M-HE25 2.5 2.649 392 20 CSW20032H30 32 M-HE30 3 2.932 305
16 CSW16063H30 63 M-HE30 3 23932 380 20 CSW20038H25 38 M-HE25 2.5 2.649 361
16 CSW16063H35 63 M-HE35 3.5 3.136 378 20 CSW20038H30 38 M-HE30 3 2.932 356
16 CSW16063H45 63 M-HE45 4.5 3.636 382 20 CSW20038H35 38 M-HE35 3.5 3.136 354
16 CSW16063H50 63 M-HE50 5 4.061 424 20 CSW20038H40 38 M-HE40 4 3.261 375
16 CSW16076H35 76 M-HE35 3.5 3.136 457 20 CSW20038H45 38 M-HE45 4.5 3.636 382
18 CSW18026H25 26 M-HE25 2.5 2.649 228 20 CSW20038H50 38 M-HE50 5 4.061 400
18 CSW18026H40 26 M-HE40 4 3.261 243 20 CSW20040H40 40 M-HE40 4 3.261 393
18 CSW18028H30 28 M-HE30 3 2.932 260 20 CSW20040H45 40 M-HE45 4.5 3.636 401
18 CSW18028H35 28 M-HE35 3.5 3.136 257 20 CSW20044H30 44 M-HE30 3 2.932 407
18 CSW18030H40 30 M-HE40 4 3.261 276 20 CSW20044H35 44 M-HE35 3.5 3.136 405
18 CSW18032H25 32 M-HE25 2.5 2.649 278 20 CSW20044H40 44 M-HE40 4 3.261 430
18 CSW18032H30 32 M-HE30 3 2.932 296 20 CSW20044H50 44 M-HE50 5 4.061 451
18 CSW18032H35 32 M-HE35 3.5 3.136 293 20 CSW20044H60 44 M-HE60 6 4.421 460
18 CSW18038H25 38 M-HE25 2.5 2.649 327 20 CSW20046H45 46 M-HE45 4.5 3.363 456
18 CSW18038H30 38 M-HE30 3 2.932 350 20 CSW20051H35 51 M-HE35 3.5 3.136 482
18 CSW18038H35 38 M-HE35 3.5 3.136 347 20 CSW20051H40 51 M-HE40 4 3.261 506
18 CSW18038H40 38 M-HE40 4 3.261 343 20 CSW20051H50 51 M-HE50 5 4.061 538
18 CSW18038H45 38 M-HE45 4.5 3.636 350 20 CSW20051H60 51 M-HE60 6 4.421 558
18 CSW18038H50 38 M-HE50 5 4.061 369 20 CSW20057H30 57 M-HE30 3 2.932 535
18 CSW18040H40 40 M-HE40 4 3.261 359 20 CSW20057H40 57 M-HE40 4 3.261 562
18 CSW18040H45 40 M-HE45 4.5 3.636 367 20 CSW20057H45 57 M-HE45 4.5 3.636 570
18 CSW18044H25 44 M-HE25 2.5 2.649 377 20 CSW20057H50 57 M-HE50 5 4.061 589
18 CSW18044H30 44 M-HE30 3 2.932 404 20 CSW20063H45 63 M-HE45 4.5 3.636 637
18 CSW18044H35 44 M-HE35 3.5 3.136 401 20 CSW20063H50 63 M-HE50 5 4.061 667
18 CSW18044H40 44 M-HE40 4 3.261 392 24 CSW24026H30 26 M-HE30 3 2.932 335
18 CSW18044H45 44 M-HE45 4.5 3.636 400 24 CSW24028H30 28 M-HE30 3 2.932 358
18 CSW18044H50 44 M-HE50 5 4.061 414 24 CSW24028H50 28 M-HE50 5 4.061 382
18 CSW18046H45 46 M-HE45 4.5 3.636 417 24 CSW24032H30 32 M-HE30 3 2.932 405
18 CSW18051H35 51 M-HE35 3.5 3.136 304 24 CSW24036H60 36 M-HE60 6 4.421 491
18 CSW18051H40 51 M-HE40 4 3.261 462 24 CSW24038H30 38 M-HE30 3 2.932 475
18 CSW18051H50 51 M-HE50 5 4.061 495 24 CSW24038H35 38 M-HE35 3.5 9.136 473
18 CSW18057H30 57 M-HE30 3 2.932 528 24 CSW24038H40 38 M-HE40 4 3.261 471
18 CSW18057H45 57 M-HE45 4.5 3.636 520 24 CSW24038H45 38 M-HE45 4.5 3.636 471
18 CSW18063H35 63 M-HE35 3.5 3.136 375 24 CSW24038H50 38 M-HE50 5 4.061 491
18 CSW18063H45 63 M-HE45 4.5 3.636 581 24 CSW24040H40 40 M-HE40 4 3.261 493
18 CSW18063H50 63 M-HE50 5 4.312 613 24 CSW24040H45 40 M-HE45 4.5 3.636 501
18 CSW18063H60 63 M-HE60 6 4.421 644 24 CSW24044H35 44 M-HE35 3.5 3.136 497
18 CSW18076H35 76 M-HE35 3.5 3.136 713 24 CSW24044H40 44 M-HE40 4 3.261 493
18 CSW18087H40 87 M-HE40 4 3.261 783 24 CSW24044H50 44 M-HE50 5 4.061 513
20 CSW20026H25 26 M-HE25 2.5 2.649 251 24 CSW24044H70 44 M-HE70 7 4.954 580
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-52
Wing Pulleys
Standard Duty — M-HE Bushed
A
C
B A
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-53
Wing Pulleys
Mine Duty
’s Mine Duty Wing Pulleys are constructed from extremely heavy
materials and are recognized in the industry as the most aggressive
‘Mine Duty’ stock Pulley on the shelf. All Wing Pulleys utilize the
unique ‘end-pipe’ design, which offers ultimate protection against Wing
folding and hub-weld fatigue. Our minimum .625" thick contact bar yields
additional life in abrasive applications while our competitors thinner bar
does not. Additionally, our .375" thick Wing and .25" gussets offer greater
structural support in aggressive applications.
Features:
• Available in 8" thru 60" Diameter
• Minimum .625" x 1.5" Contact Bars
• Minimum .375" Thick Wings
• Minimum .25" Gussets
A
C
• Features Unique ‘End Pipe’ design
B A
-- Better Protection Against Wing Folding
-- Better Protection Against Hub-Weld Fatigue
• Several Hub/Bushing Systems Available
's Mine Duty Wing Pulleys are manufactured with Crown face. A
Flat face available upon request.
B A
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-55
Wing Pulleys
Mine Duty
A
C
B A
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-56
Wing Pulleys
Mine Duty
A
C
B A
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-57
Wing Pulleys
Mine Duty
A
C
B A
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-58
Wing Pulleys
Mine Duty
A
C
B A
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-59
Wing Pulleys
Mine Duty - M-HE Bushed
* General position for Bushing face - for position per application consult .
BOLD TYPE INDICATES PRODUCT CARRIED IN STOCK. Other sizes are available for quick delivery from nearest facility.
M-61
Wing Pulleys
Quarry Duty
A
C
B A
Features:
• Available in 10" thru 60" Diameter
• Minimum .75" x 2" Contact Bars “AR400” Abrasive Resistant Steel
• Minimum .5" Thick Wings
• Minimum .25" Gussets
• Features Unique “End Pipe” Design
-- Better Protection Against Wing Folding
-- Better Protection Against Hub-Weld Fatigue
• Features Full Depth Keyed Bushings for Higher Clamping to Shaft
M-63
Engineered Class Pulleys
MTO Capabilities
Engineered Class Pulleys are Designed to Provide Long Life and Reliability
The Engineered Class Pulley (ECP) line is not limited to just high tonnage and extreme applications. This class of Pulley can
be used effectively in every industry to ensure optimum performance and Pulley longevity. The Conveyor Equipment Manufacturers
Association (CEMA) defines Engineered Class Pulleys as “One which has been specifically designed to meet load conditions of a
particular Conveyor Pulley”.
• Full penetration weld using a high-strength submerged arc • Magnetic Particle Testing Weldment is available
process • Thermal Stress Relieving ensures each component in the
• Keyless locking device reduces stress at the Pulley-to- Pulley operates as a Pulley system
Shaft assembly, eliminating a weld failure • Static Balancing is standard and Dynamic Balancing is
• CNC Machining of end-discs and Shafts available
• Ultrasonic Tested Weldment is available • Integral hub, profiled, turbine and T-Bottom end disc designs
The diagram below represents the flexible design featured in our Engineering Class Pulleys. As
the load is applied, the rim, end-discs, keyless lockers, and the Shaft, all operate in unison, so
Full Penetration Weld as to not introduce stress risers.
Disc Machined to
TURBO-DISC Profile
LOAD
Keyless DRUM
Bushing
END-DISC
PILLOW
BLOCK
SHAFT
KEYLESS
BUSHING
M-64
Engineered Class Pulleys
MTO Capabilities
Specifications
’s Engineered Class Pulleys (ECP) are available as:
• EMD (Engineered Mine Duty)
• TD (Turbo Disc)
• TB (T-Bottom)
• DSP (Dead Shaft Pulley)
ECP’s feature:
• Keyless locking devices (single engagement in EMD and
TD, double engagement in TB’s)
-- Higher contact pressures for greater torque
transmission
-- No backlash due to fit tolerances
-- Ability to adjust axial position and angular timing
• Full penetration weld in rims and end-disc to rim
• Integral hub design, allowing for pre-stress elimination at
lockers
• Profiled end-disc (in Turbo Disc and T-Bottom)
• No center discs
• Statically balanced
M-65
Engineered Class
Pulleys Types
EMD, TD and TB come Statically balanced and are available with Machined Face
All Engineered Class Pulleys come with Two Year Warranty
M-66
Clean Flight® Wing
Pulley
Operational Advantages:
• Noise Reduction.
Users report a reduction in operating decibels from 14% to
22%, depending on belt speed and belt width.
• Less Vibration in Operation.
Since the belt is in constant contact with the Clean Flight®
Wing outside diameter (OD), the “belt-slapping” observed
in traditional Wing Pulley operation is eliminated, as is the
operational ambient noise. Decreased vibration also means less
stress on the belt, splice, and bearings.
• Enhanced Belt Tracking. Typical Construction Specs:
Each CFW flight contacts the belt at a helix angle that
contributes to the tracking of the belt. The CFW flight operates All Clean Flight ® Wing Pulleys (CFW) use the
much like a traditional "spiral" Wing Pulley in assisting belt longest pitch possible for each diameter and
tracking. The CFW is also offered in a crown-face profile. face width
• Optimized Belt Cleaning.
As well as reducing vibration, noise and improving belt STANDARD DUTY:
tracking, the CFW also cleans the belt more effectively while in .5" Flight Thickness
operation by shedding materials away from the belt surface.
Additionally, the CFW operates with less vibration at the skirt MINE DUTY:
board zones, reducing fines at the loading zone. .75" Flight Thickness
• Improved Material Rejection. QUARRY DUTY:
Traditional Wing Pulley flights contact the conveyed material at
1" Flight Thickness
a right angle, whereas the CFW actually “plows” material out of
harm's way, toward the end of the Pulley, where it safely falls
away from the Pulley and belt contact surface. There is never a
need for reinforcing rings with a CFW.
Special Features:
ASSEMBLY OPTIONS BUSHING OPTIONS PULLEY OPTIONS
• Bearing Assemblies • MXT • Hard Surfacing
• Take Up Frame Assemblies • M-HE • Custom Epoxy Paint
• Keyless Lockers for Shaft • QD • Special Flight Spacing
Connection • Taper Bushed • Special Pitch
• Keyless Locking Device • Continuous Welding of Flights
M-67
Sprocket Rollers
For Engineered Class Chains
manufactures Sprocket Rollers in any diameter and length in
either through Shaft designs, detachable Bushing designs, or stub Shaft
“gudgeon” designs. Whatever specific assembly pattern requirements
are needed, can attach any Accu-Torch® sprocket or Wide Drag
Sprocket to the roller core.
can also provide full custom ready to install assemblies with
bearings, Shaft, and Drive Sprocket.
Whether it is for a replacement part or a new design, is your one
stop shop for MTO Sprocket Rollers.
Mill or Engineered Class Chain Sprocket Sprocket Roller with Driven Sprocket
SPROCKET
• Any type of Mill, Engineered Class Chain or Wide Drag
Sprockets
• Any taper-bushed system, keyless locking device or
weld in Shaft systems can be installed
• Bore Concentric to pitch line, pitch tolerance
maintained
• Extensive custom capabilities available
M-68
Other Special
Construction Pulleys
Special manufacturing processes require special Pulleys. Whether the • Meet or Exceed CEMA Standards
equipment is used in mining, chemical, waste processing, or any other
• Superior Strength
demanding application has the experience to solve your problem.
• Aggressive Construction
With regional manufacturing facilities and knowledgeable sales teams
strategically located across North America, can meet your needs. • Fast Reliable Service
is the one you can rely on for manufacturing expertise, application
experience, and a quick delivery to get you what you need, when you need
it.
routinely manufactures special construction Pulleys to provide
exceptional wear in even the roughest conditions. Below is a sample of
some of the more common specialty Pulleys can manufacture.
Spiral Pulleys
The Spiral Pulley is manufactured with two reverse helix flights wrapped around the Pulley core. The spiral material can vary in thickness and
width and is subject to customer specification. The Spiral Pulley is very effective in cleaning the belt while suppressing noise.
Spiral Drum Pulley with 1" x 1" Flight Spiral Wing Pulley
M-69
Other Special
Construction Pulleys
Gudgeon Rollers
offers gudgeon rollers, fabricated from thick wall pipe or tube and fitted with a specially designed end assembly that eliminates Shaft and end
disc weld fatigue. Each of these rollers is designed to convey bulk product without a conveyor belt directly over the roller face. Industries such as
logging, lumber mills, steel mills and palletized product applications are perfect for the Gudgeon Roll.
Cage Rollers
manufactures cage rollers for belt conveyors in almost any custom size requested. Cage rollers are very effective in allowing material to fall
through the Pulley. The roller is also known as a “beater roll” and actually shakes the material loose from the belt as it passes over the Pulley.
M-70
Lagging
NOMENCLATURE
VRL HBL DGL
Vulcanized Rubber Lagging Herringbone Lagging Diamond Grooved Lagging
In any conveying application, conveyor belt slippage can be a problem. offers vulcanized rubber lagging on all of our Drum Pulleys.
There are basically three different factors that can cause slippage After preparation of the Pulley, rubber is applied directly to the face
between a conveyor belt and a Drive Pulley. by extrusion. Our lagging department has perfected the process and
1. The coefficient of friction might be too low. can apply rubber in any thickness to any diameter Pulley. The precise
pressure, temperature and curing time ensures a quality bond on each
2. The wrap angle of the belt on the Conveyor Pulley might be too Pulley.
small.
We offer several grooving patterns in the cured rubber, but among the
3. The tension on the belt might be too low. most popular are Herringbone and Diamond Groove. The standard
The most cost efficient way to reduce the risk of slippage is to install the hardness for Pulley lagging ranges from 60-70, but other durometers are
right type of Pulley lagging on the Drive Pulley. The use of lagging on the available upon request.
Conveyor Pulley performs two functions:
1. Its primary function is to aid in gripping the conveyor belt, thus
helping transmit torque from the drive to the Pulley in order to
carry the load on the conveyor belt.
2. Lagging also prolongs the wear life of the Pulley.
Vulcanized lagging is a rubber compound that has been cured in an
autoclave, which typically results in a 60-70 durometer material. After
curing, the lagging can be grooved and/or machined.
M-71
Lagging
AR — Abrasive Resistant
Abrasive Resistant Lagging is a very popular compound in the most
rugged applications where protection against highly abrasive conveyed
materials is required. ’s AR (abrasive resistant) compound was
developed with the engineering support and technical experience of
chemists from the tire industry. The AR compound mimics the substance
used in the tires of the giant “quarry loaders” where resistance to
puncture, wear, and chunking has been essential. Our suppliers have
learned through the years that the same technology can be applied to our
rubber lagging compounds.
For maximum protection against premature lagging failure, specify
’s AR Lagging!
M-72
Lagging
Cold Bond
Cold Bond Lagging is another product available from . We stock
full rolls of pre-cured rubber suitable for installation directly to the face of
the Pulley. Our Cold Bond rubber is available in plain or diamond grooved
pattern. This product is typically used when Pulleys on the conveyor
must be re-lagged while still in operation, and can reduce the change-out
time required to install a complete new assembly.
Simply tell us the diameter and face width of the Pulley on which you
would like to install our Cold Bond Lagging, and we will generate a quote
for a “Cold Bond Kit” which will include all necessary materials required
to lag the subject Pulley.
Molded Urethane
Molded Urethane Lagging is yet another product offered by which
will protect Pulleys from extreme abrasion. Our urethane lagging is
actually poured in a liquid state into a fabricated form, which encases the
Pulley. Once the urethane is cured and hardened, we machine the outside
diameter to a concentric OD. We can additionally alter the urethane
lagging to either a herringbone or diamond grooved pattern.
M-73
Wear Items
Shell Lagging
Shell Lagging is one product offered by that allows our customers Pulley
# Shells
to Relag Drum Pulleys while they are still on the conveyor. Our field Diameter
installable shell lagging kits are available in 3 piece, 4 piece and 5 piece 12 3
construction depending upon the diameter of the core Pulley to which 14 3
the shells will be applied. Each shell is available in either flat construction 16 4
or crowned construction. 18 4
20 4
24 4
30 4
36 5
Wear Rims
The Steel Wear Rims are an additional item offered by that
allows the Pulley to be patched while it is on the conveyor. Each rim
is available in a 2 piece shell in .25", .313", .375" or .5" thick material.
Stainless steel is also available.
Wing Lagging
Wing Lagging is designed to slide over the Wing Pulley
contact bars and is available in sizes suitable for all duties of our Wing
Pulleys. Wing lagging is an excellent method of extending life on Wing
Pulleys contact bars where belt abrasion typically causes premature
wear. The Wing Lagging product is easily installed either in the
shop or in the field and can be supplied in either 72" long strips for your
inventory, or in cut to length sizes for immediate installation.
M-74
Wear Items
Once Again, has the answer when it comes to offering a Q: Do the Lagged Replacement Contact Bars fit all
solution to field replacements on Conveyor Pulleys, Steel Wear manufacturers’ Wing Pulleys?
Rims, Shell Lagging, Wing Lagging and Lagged Replacement
Bars. There are many applications that require a simple fix in the A: Yes they do. However, it is imperative that the Wing flight
field while the Pulley is still on the conveyor structure. The thickness be submitted to our factory prior to manufacturing
Wear Item line up addresses these types of situations. We offer the replacement bars. Most Pulley manufacturers utilize
replacement parts for both Drum Pulleys and Wing Pulleys; each different thickness materials on their Wing flights and in
intended for installation on an existing Pulley in the field. order to ensure a tight fit of our bar onto the Wing, we must
know that dimension. Please ask one of our factory
Some common questions to address regarding the Wear representatives for a Lagged Replaceable Contact Bar sheet.
Parts are:
Q: When does it make sense to install the Shell Lagging Q: Do the Steel Wear Rims fit on all manufacturers
on a Drum Pulley? Pulleys?
A: If the conveyor belt has worn through the rubber lagging on A: Yes, however we need to know the outside diameter and
a Pulley but not had time to wear into the Drum Pulley shell, face width of the Drum Pulley on which it will be installed.
the Shell Lagging may be a good solution. We typically manufacture the Steel Wear Rims in 2 halves
which need to be clamped to the core Pulley. Each half-shell
is trimmed ¼" short of the core face so that there is room
Q: Can I install the Shell Lagging on new Pulleys? to run a weld to fasten the Wear Rim to the Pulley. It is also
important that the core is clean and free of debris prior to
A: Absolutely! However it is not recommended that the shell
installation for maximum operating performance.
lagging be used in Drive Pulley applications where tensions
are high. The Shell Lagging is primarily intended for
field installation as a means of avoiding down time.
** MANUFACTURERS NOTE **
Q: Does the Wing Lagging fit on all manufacturers' Wear Rims, Shell Lagging, Wing Laggingand Replacement
Wing Pulleys? Lagged Contact bars are intended for wear and tractive properties
only, and NOT intended for structural enhancement of the
A: No, the Wing Lagging product is intended for
underlying Conveyor Pulley.
application on flatbar of dimensions equal to what is supplied
on the Wing Pulley.
M-75
Conveyor Bushings
L
B QD Short Bushings
and Taper Bushings
also Available.
OD Please See
BC The Big Catalog,
Section B
For More Information.
's MXT® and MXT-STL® Bushings are available from stock to fit all popular Pulley sizes. stocks both MXT® and MXT-STL® Bushings in a
wide range of bore sizes per hub. Both the MXT® and MXT-STL® Bushing offers a 2" per foot taper, which reduces end disc pre-stressing, as well as
increasing clamping force.
All Bushings size 50 and larger feature full depth keys.
L
B QD Short Bushings
and Taper Bushings
also Available.
OD Please See
BC The Big Catalog,
Section B
For More Information.
's M-HE® Bushings are available from stock to fit all popular Pulley sizes. stocks M-HE® Bushings in a wide range of bore sizes per hub.
The M-HE Bushing offers a 3" per foot taper, which reduces end disc pre-stressing.
M-77
Weld-On Hubs
's weld-on hubs are specifically designed for use on Conveyor Pulleys. Hubs are available from stock to fit all popular Pulley sizes. 's
weld-on hubs are available in MXT® and M-HE® styles.
M-78
designed to handle transmitted loads and To avoid To avoid
Todamage,
avoid Tosupporting
avoid
damage,damage,
damage,
supporting
supporting supporting
structure structure
structure structure
belt tension(s). including including
including
shafts including
and
shaftsshafts
andshafts
bearingsand bearings
and
bearings
must bearings
bemust must
be must
be be
designed to designed
designed designed
handle
to to handle
handle to handle
transmitted transmitted
loadstransmitted
transmitted loadsloads
and and loads
and an
belt tension(s).
belt tension(s). belt tension(s).
belt tension(s).
offers a wide variety of solutions for your Standard * Tolerances for Shafting diameters are as follows:
Shafting needs. We offer a number of materials Shaft Plus Minus
from cold finish ½" diameter to hot roll material in Diameters Up to 1.5” 0.000 0.002
excess of 15" diameter. Stock Shafting material is .938 Over 1.5” to 2.5” 0.000 0.003
available in several grades including 1144, 1045, 1.188 Over 2.5” to 4" 0.000 0.004
4140 and stainless steel. Our machining capabilities 1.438 Over 4" to 6" 0.000 0.005
are virtually unlimited featuring CNC lathes, as well 1.688 Over 6" to 8" 0.000 0.006
as engine lathes, vertical milling machines, horizontal 1.938 Over 8" to 9" 0.000 0.007
milling machines and more to modify every Shaft 2.188 Over 9" 0.000 0.008
exactly to your specifications for your unique 2.438 * Special tolerances available upon request.
application. 2.688
2.938
3.438
Diameters shown in table are standard sizes
3.938
recommended for general use. Standard Bushings,
4.438
Bearings, Couplings, Pulleys, Sheaves, Clutches,
Backstops, and other Conveyor items are commonly 4.938
found in these diameters. 5.438
5.938
6.5
Shaft Keyseats 7
7.5
Shaft keyseats are commonly used beneath Pulley
Bushings and with a drive. Pulley keyseats for Overall
standard Pulleys start .5" inside the face and are Shaft Length
keyed through the Bushing. Location of drive
keyseats are standard and the size is determined
by the Shaft diameter. Additional keyseats or non- Drive Side
Extension
standard sizes can be manufactured per request.
M-80
Take-Up Frames
A properly designed belt conveyor will require the use of a take-up device. This device will take up the stretch in the conveyor belt and
keep proper tension at the Drive Pulley to reduce slippage. A dynamic type, like a gravity take-up, is generally preferred but not always
practical due to space or cost. Screw Take-Up Frames are a good solution for these applications. offers several types of
frames that accommodate most bearings, mounting positions, and travel. Take-Up Frames are available in stock or made-to-
order for all of your mechanical take-up needs.
's Take-Up Frames are fabricated from steel, offering superior strength and durability in the most rugged conditions.
• Available in Top Angle, Heavy-Duty, Center Pull, Wide Slot, Tube Take-Up & Light Duty
• Accommodate bearing Shafts sizes from 1" to 5.938"
• Available in standard travel lengths from 9" to 60"
• Stainless Steel, ACME thread & MTO lengths available
• Suitable for most manufacturers’ housing styles including center pull wide slot, pillow block and top angle protected screw
CROSS REFERENCE
Top Angle Take-Up Frames (MTA)* Center Pull Take-Up Frames (MCP)*
Dodge Precision Dodge Precision Rexnord Browning
MTA10 TP10 PTA200 MCP308 CP308 PCP108 ZHT6 T1000D
MTA20 TP20 PTA203 MCP400 CP400 PCP200 ZHT7 T1000EL
MTA30 TP30 PTA208 MCP408 CP408 PCP203 ZHT7 T1000EH
MTA40 TP40 PTA300 MCP502 CP502 PCP208 ZHT8 T1000F
MTA50 TP50 PTA308 MCP515 CP515 PCP300 ZHT9 T1000GL, GH
MTA60 TP60 PTA400 MCP613 CP613 PCP308 ZHT10 T1000JL, JH
* For bearing compatibility see page M-88. MCP810 CP810 PCP400 ZHT11 T1000K
* For bearing compatibility see page M-88.
Light Duty Take-Up Frames (MLD)* Wide Slot Take-Up Frames (MWS)*
Dodge Precision Dodge Precision
MLD10 LD10 PMD-100 MWS300 WS300 PWS100
MLD20 LD20 PMD-108 MWS308 WS308 PWS108
MLD30 LD30 PMD-200 MWS400 WS400 PWS200
MLD40 LD40 PMD-208 MWS502 WS502 PWS208
MLD45 LD45 PMD-300 MWS515 WS515 PWS300
MLD50 LD50 PMD-308 MWS608 WS608 PWS308
* For bearing compatibility see page M-88. * For bearing compatibility see page M-88.
M-81
Take-Up Frames
M-82
Take-Up Frames
2 × 2 × .25
.375 × 1.5
MLD10
18 MLD10-18 15 29.5 31
4.875
6.625
2.875
4.375
1.063
2.125
1.125
1.625
.375
2.75
3.5
2.5
.25
.75
3.5
30 MLD10-30 19 41.5 43
36 MLD10-36 22 47.5 49
42 MLD10-42 24 53.5 55
48 MLD10-48 26 59.5 61
6 MLD20-6 10 18 19.5
9 MLD20-9 11 20.5 22
12 MLD20-12 13 23.5 25
2 × 2 × .25
18 MLD20-18 16 32 33.5
.5 × 2.5
MLD20
4.438
2.564
2.125
1.125
1.625
5.75
8.25
3.75
6.25
.813
24 MLD20-24 18 38 39.5
2.5
.25
.75
3.5
.5
30 MLD20-30 20 44 45.5
36 MLD20-36 24 50 51.5
42 MLD20-42 25 56 57.5
48 MLD20-48 27 62 63.5
12 MLD30-12 17 26.75 28.25
18 MLD30-18 19 32.75 34.25
2 × 2 × .25
.625 × 2.5
24 MLD30-24 22 38.75 40.25
MLD30
2.688
1.125
1.625
6.25
5.75
.813
2.25
.25
.75
3.5
.5
9
9.875
6.375
7.875
1.125
3.188
1.125
6.25
4.75
.625
.313
2.25
1.75
4.75
16.75
11.25
1.375
4.125
5.875
9.75
2.25
.75
2.5
1.5
.5
6
11.125
16.75
1.375
4.125
5.875
9.75
2.25
.75
2.5
1.5
.5
6
Top Angle Take-Up Frames (MTA) Center Pull Take-Up Frames (MCP)*
Common Bearings Common Bearings
MTA10 LB ETP-B22431H x 1 15/16 D TP-E-115R MCP308 ZT4-5107 WSTU-E-107R WSTU-S2-107R
MTA20 LB ETP-B224345H x 2 3/16 D TP-E-203R MCP400 ZT6-5115 WSTU-E-115R WSTU-S2-115R
MTA30 LB ETP-B22439H x 2 7/16 D TP-E-207R MCP408 ZT7-5203 WSTU-E-203R WSTU-S2-203R
MTA40 LB ETP-B22447H x 2 15/16 D TP-E-215R MCP502 ZT8-5207 WSTU-E-207R WSTU-S2-207R
MTA50 LB ETP-B22455H x 3 7/16 D TP-E-307R MCP515 ZT9-5215 WSTU-E-215R WSTU-S2-215R
MTA60 LB ETP-B22463H x 3 15/16 D TP-E-315R MCP613 ZT10-5307 WSTU-S2-307R
MCP810 ZT11-5315 WSTU-S2-315R
* Note: No wide slot ball bearings for this frame, roller only.
M-88
Conveyor Pulley
and Shaft Engineering
This information can be used for Pulleys with rigid end plate design. That includes the Standard Duty, Mine Duty and Quarry Duty products
that are designed using CEMA/ANSI standards. The foundation of that design is accomplished by designing around a maximum designated Shaft
deflection. Any questions in design should be run through Engineering.
1. Calculate effective tension, Te 7. Determine minimum Shaft size by using Table 5 (next page). Subtract the face width from the
bearing centers. Using the face width column go down and across from the proper bearing
Te = HP × 33,000 center minus face (interpolate if necessary) until a Shaft load rating shows higher than the
FPM calculated resultant load from above.
2. Calculate belt slack side tension, T2 8. Pulley diameters are recommended by the belt manufacturer and generally have greater impact
on Pulley diameter selection than the load itself. Table 3 is used to compare the recommended
T2 = K × Te diameter from the belt manufacturer to the PIW ratings for standard duty Pulleys.
Table 1: K-factor Table 3: Pulley PIW Rating
Single
Auto TU Manual / Screw TU Arc of Pulley Diameter (Inches)
Drive
Contact 8 10 12 14 16 18 20 24 30 36 42 48 54 60
Belt Wrap Bare Lagged Bare Lagged
10 65 80 95 120 145 175 205 260 345 430 520 605 690 775
180 0.84 0.5 1.2 0.8
20 50 60 75 95 115 135 160 200 265 335 400 465 535 600
190 0.77 0.46 1.1 0.8
30 45 55 65 80 100 115 140 175 230 290 345 405 460 520
200 0.72 0.42 1.1 0.7
40 35 45 55 70 85 100 120 150 200 245 295 345 395 445
210 0.67 0.38 1 0.7
50 30 40 45 60 70 85 100 130 170 215 255 300 340 385
220 0.62 0.35 0.9 0.6
60 30 40 45 60 70 85 100 125 165 205 250 290 330 375
230 0.58 0.33 0.9 0.6
70 30 40 50 60 75 85 105 130 175 220 260 305 350 395
240 0.54 0.3 0.8 0.6
80 30 45 50 65 80 95 115 140 190 235 285 330 375 425
90 35 45 55 70 85 100 120 150 200 255 305 355 405 455
100 40 50 60 75 90 110 130 160 215 270 325 380 430 485
3. Calculate belt tight side tension, T1
110 45 55 65 80 100 115 140 175 230 290 345 405 460 520
T1 = T2 + Te 120 45 55 65 85 105 120 145 185 245 305 365 425 490 550
130 50 60 75 95 115 135 160 200 265 335 400 465 535 600
4. Calculate resultant load for each non-Drive 140 55 70 80 105 125 150 180 225 300 375 450 525 600 675
Pulley, R 150 60 75 90 115 140 170 200 250 335 420 505 590 670 755
R = T2 × Wrap Factor 160 70 85 100 130 160 185 225 280 375 465 560 650 745 840
170 75 95 115 145 175 205 250 310 415 520 620 725 830 930
Table 2: Non Drive Wrap Factor 180 85 105 125 160 195 230 275 345 460 575 690 805 920 1035
Belt Belt Belt 190 75 95 115 145 175 205 250 310 415 520 620 725 930 930
Factor Factor Factor
Wrap Wrap Wrap 200 70 85 100 130 160 185 225 280 375 465 560 650 745 840
10° 0.174 90° 1.414 175° 1.998 210 60 75 90 115 140 170 200 250 335 420 505 590 670 755
15° 0.261 95° 1.475 180° 2 220 55 70 80 105 125 150 180 225 300 375 450 525 600 675
20° 0.347 100° 1.532 185° 1.998 230 50 60 75 95 115 135 160 200 265 335 400 465 535 600
25° 0.433 105° 1.587 190° 1.992 240 45 55 65 85 105 120 145 185 245 305 365 425 490 550
30° 0.518 110° 1.638 195° 1.983
35° 0.601 115° 1.687 200° 1.97
40° 0.684 120° 1.732 205° 1.953 Table 4: Resultant Load Factor, Drive Pulleys
45° 0.765 130° 1.813 210° 1.932 Angle of Wrap
T1 / T2
50° 0.845 135° 1.848 215° 1.907 180 185 190 195 200 205 210 215 220 225 230 235 240
55° 0.923 140° 1.879 220° 1.879 1.8 2.8 2.798 2.79 2.778 2.761 2.739 2.713 2.681 2.645 2.605 2.56 2.511 2.458
60° 1 145° 1.907 225° 1.848 2 3 2.998 2.99 2.977 2.96 2.937 2.909 2.887 2.84 2.798 2.752 2.701 2.646
65° 1.075 150° 1.932 230° 1.813 2.2 3.2 3.197 3.19 3.177 3.158 3.135 3.107 3.073 3.035 2.992 2.944 2.892 2.836
70° 1.147 155° 1.953 235° 1.774 2.4 3.4 3.394 3.389 3.376 3.357 3.333 3.304 3.27 3.231 3.187 3.138 3.085 3.027
75° 1.218 160° 1.97 240° 1.732 2.6 3.6 3.597 3.589 3.575 3.556 3.532 3.502 3.467 3.427 3.382 3.332 3.278 3.219
80° 1.286 165° 1.983 2.8 3.8 3.797 3.789 3.775 3.755 3.73 3.7 3.664 3.624 3.578 3.527 3.472 3.412
85° 1.351 170° 1.992 3 4 3.997 3.989 3.974 3.955 3.929 3.898 3.862 3.821 3.774 3.723 3.667 3.606
3.2 4.2 4.197 4.188 4.174 4.154 4.128 4.097 4.06 4.018 3.971 3.919 3.862 3.8
3.4 4.4 4.397 4.388 4.374 4.353 4.327 4.295 4.258 4.215 4.168 4.115 4.057 3.995
5. Calculate resultant load for the Drive Pulley. 3.6 4.6 4.597 4.588 4.573 4.553 4.526 4.494 4.456 4.413 4.365 4.312 4.253 4.191
3.8 4.8 4.797 4.788 4.773 4.752 4.725 4.693 4.655 4.611 4.562 4.509 4.45 4.387
Divide T1 by T2 ( T1/T2) to look up in table 4 5 4.997 4.988 4.973 4.952 4.925 4.892 4.853 4.809 4.76 4.706 4.647 4.583
4. 4.2 5.2 5.197 5.188 5.172 5.151 5.124 5.091 5.052 5.008 4.958 4.903 4.844 4.779
Then calculate drive R: 4.4 5.4 5.397 5.388 5.372 5.351 5.323 5.29 5.251 5.206 5.156 5.101 5.041 4.976
R = T2 × Factor
6. Belt and Pulley width relationship
PW = BW + 2 (Belting < 48")
PW = BW + 3 (Belting ≥ 8")
M-89
Conveyor Pulley
and Shaft Engineering
Table 4: Allowable Shaft Loads (lb) for Pulleys
Bearing Pulley Face Width (in)
Shaft
Centers
Diameter 12 14 16 18 20 22 26 32 38 44 51 57 63 66
Minus Face
2 1000 920 780 670 590 530 440 350 290 240 210 180 170 160
6 570 520 440 380 340 300 250 200 160 140 120 100 94 90
1.188
10 400 370 310 270 230 210 170 140 110 96 82 73 66 63
14 300 280 240 200 180 160 130 110 87 74 63 56 51 48
3 1500 1400 1200 1100 950 790 620 510 440 370 330 300 290
6 1000 950 820 720 640 530 420 350 300 250 220 200 190
1.438
10 700 660 570 500 450 370 290 240 210 180 160 140 130
14 540 510 440 390 350 290 230 190 160 140 120 110 100
3 2400 2300 2000 1800 1500 1200 980 830 710 630 570 540
6 1600 1600 1400 1200 1000 800 660 560 480 430 380 370
1.938
10 1100 1100 960 850 700 560 460 390 340 300 270 260
16 780 750 660 590 490 380 320 270 230 210 180 180
3 3700 3500 3100 2600 2100 1700 1400 1200 1100 990 940
6 2500 2400 2100 1800 1400 1100 980 840 740 670 640
1.938
10 1700 1700 1500 1200 970 800 680 580 520 470 440
16 1200 1100 1000 840 670 550 470 400 360 320 310
3 5300 5100 4200 3300 2800 2400 2000 1800 1600 1500
8 2900 2800 2300 1900 1500 1300 1100 990 890 850
2.188
12 2200 2100 1700 1400 1100 970 820 730 660 630
18 1500 1500 1200 980 810 690 590 530 470 450
4 6300 5600 4400 3700 3100 2700 2400 2100 2000
8 4000 3600 2900 2400 2000 1700 1500 1400 1300
2.438
12 3000 2700 2100 1700 1500 1300 1100 1000 970
18 2100 1900 1500 1300 1100 910 810 730 690
4 8100 6400 5300 4500 3800 3400 3100 2900
8 5300 4200 3400 2900 2500 2200 2000 1900
2.688
12 3900 3100 2600 2200 1900 1600 1500 1400
18 2800 2200 1800 1600 1300 1200 1100 1000
4 10600 9100 7500 6400 5500 4900 4400 4200
8 6900 6000 4900 4200 3600 3200 2900 2700
2.938
14 4600 3900 3200 2800 2300 2100 1900 1800
20 3400 2900 2400 2000 1700 1600 1400 1300
6 11600 10100 8500 7200 6400 5700 5500
10 8500 7400 6300 5300 4700 4200 4000
3.438
14 6700 5800 4900 4200 3700 3300 3200
20 5100 4400 3800 3200 2800 2500 2400
6 16700 14200 12000 10600 9500 9000
10 12400 10600 8900 7900 7100 6700
3.938
14 9800 8400 7100 6300 5600 5300
20 7500 6400 5400 4800 4300 4100
8 19600 19100 16100 14200 12700 12100
12 15300 14800 12500 11100 9900 9400
4.438
16 12500 12100 10300 9100 8100 7700
22 9800 9500 8100 7100 6400 6000
8 25200 23600 20800 18500 17600
12 19900 18600 16400 14600 13900
4.938
16 16400 15400 13500 12100 11500
22 13000 12200 10700 9600 9100
10 26600 25100 22300 21100
14 22000 20700 18400 17500
5.438
18 18700 17700 15700 14900
24 15300 14500 12800 12200
10 35700 33100 31300
14 29500 27300 25900
6
18 25100 23300 22100
24 20600 19000 19000
12 39200 38000
16 33200 32100
6.5
20 28800 27800
26 24000 23200
12 49000
16 41400
7
20 35900
26 29900
14 54100
18 46500
7.5
22 40800
28 34400
M-90
Belt Conveyor
Data Sheet
Date: By:
CompanyDName:
a t e: By :
Contact:
Company Name:
Contact:ID:
Conveyor Project:
Conveyor ID: Pr o je ct :
Required Capacity: TPH
Length:
Required Capacity: ft.
TPH
Length:
Lift: ft.ft. of angle of incline
Lift:
Material Conveyed: ft. orDensity:
angle of incline
lb/cu.ft Repose Angle:
Material CoBelt
nv eSpeed:
y e d: De n sit y : lb/cu.ft. Re p o se Angle:
Belt Speed:
Belt Width:
Belt Belt Width:
Construction:
Belt Construction:
Carrying Idler Angle: Spacing: Return Spacing:
Carrying Idler
Number of AnPlows:
gl e: Spacing: Re t u r n Spacing:
ofScrapers:
Number of Plows:
Number of Scrapers:
Skirtboard Length: Height of Material on Skirtboard:
Skirtboard Len gt h: He igh t of Material on Skirtboard:
Horsepower:
Horsepower:
Soft Start Type: (electronic, fluid, etc.)
Soft Start Type:
Bearing Centers: inches
(electronic, fluid,
etc.)
Bearing Centers: inches
Conveyor Type: (see diagrams)
Conveyor Ty p e: (Se e Diagrams)
D D
Type 1 Type 4
Type 2
D
D
Type 3 Type 5
M-91
HD Pulley
Data Sheet
Salesperson: Date:
Customer: Contact:
Address:
Phone: Email:
Pulley Tag/Callout: Quantity:
13. Notes:
M-92
Clean Flight® Wing
Data Sheet
FINISHED Ø
CORE
Salesperson: Date:
Customer: Contact:
Address:
Phone: Email:
Pulley Tag/Callout: Quantity:
M-93
Clean Flight® Wing
Data Sheet
FINISHED Ø
CORE
Salesperson: Date:
Customer: Contact:
Address:
Phone: Email:
Pulley Tag/Callout: Quantity:
M-94
TERMS & CONDITIONS OF SALE
These Terms and Conditions of Sale, along with Seller’s Standard Limited Warranty, the contents of Seller's written acknowledgment, if any, to a purchase order or any other writing submitted by Purchaser to
Seller; Seller's written proposal, if any, submitted by Seller to Purchaser; and the contents of any invoice submitted by Seller to Purchaser shall establish the commercial terms of the contract (the "Order") under
which Martin Sprocket & Gear, Inc. ("Seller") agrees to sell parts and equipment ("Products") to the purchaser (the "Purchaser") and Purchaser agrees to purchase Products from Seller.
1. AGREEMENT: Notwithstanding any additional, differing, or conflicting terms in a purchase order or percentage of the work performed prior to the date of termination, plus any additional direct
any other writing submitted by Purchaser to Seller, the terms of the Order shall constitute the entire costs reasonably incurred as a result of the termination. Percentage of work performed and
agreement between Seller and Purchaser. Writings transmitted from Purchaser to Seller, such as other charges must be verifiable by Purchaser. Upon payment of the termination charges, title
a purchaser order, that contain additional, conflicting, or differing terms from the Order shall not to all Products for which Seller has been paid shall be vested in Purchaser.
apply or in any way modify or alter the terms and conditions of the Order. Furthermore, writings
9.2 Termination for Default: The Purchaser may terminate the whole or any part of the Seller's
with terms and/or conditions different from, or in addition to, the terms and conditions appearing
in the Order, including any additional or differing terms and conditions contained in any purchase performance under the Order in any one of the following circumstances: (1) if the Seller fails to
order submitted by the Purchaser, are expressly rejected. Purchaser's submission to Seller of an make delivery of the Products or to perform within the time specified herein or any extension
offer to purchaser Products or Purchaser's acceptance of Seller's offer to sell Products, by whatever thereof; (2) if the Seller delivers Products which do not conform to the specifications; or (3)
means, constitutes Purchaser's agreement that the Order contains the entire agreement between if the Seller fails to perform any of the other provisions of the Order in accordance with its
Purchaser and Seller. Purchaser's acceptance of the Order is expressly limited to the terms and terms or so fails to make progress as to endanger performance hereunder. In the event of any
conditions of the Order. Purchaser understands and acknowledges that the price Seller quoted for such failure, Purchaser will provide Seller with written notice of the nature of the failure and
the Products is based upon Purchaser's acceptance of the terms and conditions of the Order and Purchaser's intention to terminate for default. Such notice shall provide Seller a commercially
that the price for the Products would be different if other terms and conditions of sale were to apply. reasonable opportunity to cure such failure. In the event Seller does not cure such failure
within a commercially reasonable time of such notice, Purchaser may provide Seller with a
2. ACCEPTANCE: If Seller is making an offer to sell Products, Purchaser may accept Seller's offer written Notice of Termination for Default. In the event the Purchaser terminates the Order for
only on the terms and conditions set forth in the Order. If the Purchaser is making an offer to default, as provided in this clause, the Purchaser's exclusive remedy for such default is to (i)
purchase Products from Seller, Seller's acceptance of Purchaser's offer is expressly conditioned receive a refund of the price actually paid to Seller upon the return of the Products to Seller's
on Purchaser's assent to the terms and conditions of the Order, and any commencement of facility from which the Products were originally shipped or (ii) accept the Product as delivered
performance by Purchaser shall be deemed to constitute such assent. Any additional and/or with a mutually agreed to adjustment to the price.
different terms and conditions proposed by Purchaser and/or any attempt by Purchaser to vary any
of the terms and conditions of the Order shall be deemed a material alteration and is hereby objected 10. CONFIDENTIAL INFORMATION:
to and rejected. Seller's shipment of any Products in response to a writing that attempts to vary any 10.1 In the performance of its obligations under the Order, Seller may have access to trade
of the terms and conditions of the Order or Seller's acceptance of any payment by Purchaser shall secrets and other confidential information, including but not limited to, drawings, data, costs,
not be deemed to constitute such assent to any additional and/or different terms and conditions operating procedures, customers and methods of doing business, which may be owned or
proposed by Purchaser. controlled by Purchaser and its affiliates ("Confidential Information'). If Seller does in fact
3. RISK OF LOSS: Unless a specific term of the Order provides otherwise, all shipments shall be have access to any of the Purchaser's Confidential Information in connection with the Order,
shipped F.O.B. Seller's facility and risk of loss as to such Products shall pass and remain with Seller agrees that any such Confidential Information shall at all times remain the exclusive
Purchaser once Products depart Seller's facility. property of Purchaser and shall be used by Seller and its authorized employees, agents or
subcontractors solely for the purpose of performing its obligations hereunder. Seller agrees to
4. SPECIFICATIONS: Seller shall furnish all stock Products as specified in the Order. Made-To-Order keep such Confidential Information in confidence and not to copy or permit others to copy the
Products shall be furnished in accordance with the specifications, details, requirements and/or Confidential Information or disclose the same to unauthorized persons for a period of three
drawings supplied by Purchaser, or prepared by Seller at Purchaser's direction. Any drawings, (3) years, or for any trade secret for the period of time during which such item is considered
specifications, and calculations submitted by Seller to Purchaser shall be reviewed and approved by a trade secret under applicable law.
Purchaser. Seller warrants that all Products covered by the Order will conform to the specifications,
10.2 If Seller is required to disclose the Confidential Information pursuant to any legal proceeding,
drawings, samples or other descriptions furnished to Seller or adopted by the Purchaser. If
it is determined that the Products delivered under the Order fail to meet the specifications,then Seller shall notify Purchaser in writing and allow Purchaser to seek appropriate judicial relief.
Purchaser will contact Seller and Seller shall make corrections in accordance with Seller's Limited 10.3 Notwithstanding the foregoing, nothing herein shall limit the Seller's right to disclose any
Warranty. information which: (1) was in or enters the public domain without fault of the Seller; (2) is
5. LIMITED WARRANTY: Seller's Standard Limited Warranty is attached hereto and incorporated received by Seller from a third party without restriction or breach of any duty of confidentiality;
herein for all purposes. (3) was known to Seller prior to receipt and such prior knowledge is demonstrated by
competent evidence; or (4) is required to be disclosed pursuant to government process, law,
6. PRICING, PACKAGING, DELIVERY AND PAYMENT: All Products shall be sold on the terms, order, rule or regulation.
conditions and at the price quoted in the Order. All terms of pricing, packaging, shipment, delivery
and payment are included in the Order. 11. FORCE MAJEURE: Neither Purchaser nor Seller shall be deemed to have breached the Order as
a result of delays in performance where such delays result from acts of God, fires, strikes, or
7. INSPECTION: Purchaser shall have reasonable time after delivery to inspect the Products covered occurrences, beyond the control, and without the fault, of the party seeking excuse. Any party
by the Order. Purchaser shall accept or reject the Products promptly after inspection. Payment seeking excuse under Section 11 shall promptly notify the other party in writing and take all
by Purchaser prior to its inspection will not constitute acceptance of items covered by the Order. reasonable steps to mitigate the effect of such delay on the other party. The time for performance
by Seller shall be extended by a period equal to the length of any such excused delay. If any event
8. INDEMNIFICATION: of delay as identified in Section 11 is encountered by Seller and continues for more than ninety (90)
8.1 Seller agrees to indemnify and hold harmless the Purchaser, its successors and assigns days, the Purchaser shall have the right, but not the obligation,to terminate the Agreement for its
against any and all liabilities, loss and expense (including attorney's fees) arising out of a third Convenience in accordance with Section 9.1.entitled,"Termination For Convenience."
party product liability claim that results in a judicially determined, final, and non-appealable 12. COMPLIANCE WITH LAWS: Seller certifies that its operations are in compliance with all applicable
order finding that the Products were defective provided that no indemnification shall be laws, executive orders, rules and regulations relating to Equal Employment Opportunity.
provided for any loss (or any portion of any loss) determined to have resulted from the acts
or omissions of the party seeking indemnification. Seller agrees to carry adequate product 13. INSURANCE: Seller shall not insure the Product's for Purchaser's account, unless otherwise
liability insurance to support this obligation and agrees to provide certificate(s) of insurance indicated in the Order.
showing such coverage, as requested by Purchaser.
14. ASSIGNMENT: The Order may not be assigned by either party without the written consent of the
8.2 Notwithstanding any of the other provisions in this Section 8., Seller's obligation to indemnify other party.
the Purchaser is limited to the extent of Seller's product liability insurance and the coverages
and exclusions provided for thereunder. In the event Seller's product liability insurance will 15. GOVERNING LAW: All disputes relating to the execution, interpretation, construction, performance,
not cover any of the claims described in Section 8.1., then Seller shall have no obligation to or enforcement of the Order and the rights and obligations of the parties shall be governed by the
indemnify Purchaser. Seller's obligation to pay any judgment, award, or settlement is likewise laws of, and resolved in the State or Federal courts in, the State of Texas. Purchaser hereby consents
limited by the product liability insurance coverage amounts and policy limits provided for to and waives any objection to venue and jurisdiction in such courts.
under Seller's liability insurance policies. Seller's obligation to indemnify Purchaser shall not 16. CUMULATIVE REMEDIES: SELLER SHALL IN NO EVENT BE LIABLE TO PURCHASER, ANY PERSON
apply to any Product which Purchaser (or Purchaser's employees, contractors,customers, or WHO SHALL PURCHASE FROM PURCHASER, OR ANY PERSON THAT USES ANY PRODUCTS
assigns) have altered, tampered with, misused or neglected, or for which Seller's operating SOLO PURSUANT TO THE ORDER FOR DAMAGES OF ANY KIND, INCLUDING, BUT NOT LIMITED
instructions and warnings have been ignored or removed or to the extent of the negligence or TO, DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PRODUCTION
legal fault of any party other than Seller. Indemnification provided herein is conditioned upon OR LOSS OF PROFITS RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING, BUT NOT
Purchaser providing Seller prompt notice of any claim and allowing Seller, or its insurance LIMITED TO, ANY DELAY, ACT, ERROR, OR OMISSION OF SELLER, OR ANY DEFECT, FAILURE,
company, control over the defense and/or settlement of any such claim. OR MALFUNCTION OF THE PRODUCTS, AND SELLER'S SOLE LIABILITY SHALL BE TO REPAIR
8.3 Seller shall defend any suit or proceeding brought against Purchaser to the extent such suit
OR REPLACE ANY PRODUCTS COVERED BY THE ORDER F.O.B. SELLER'S FACILITY, WHETHER
or proceeding is based on a claim that any Product or part thereof (not developed, proposed THE CLAIM FOR SUCH DAMAGES IS BASED UPON WARRANTY, CONTRACT, NEGLIGENCE, OR
or specifically mandated by Purchaser), constitutes an infringement of any patent. In the OTHERWISE.
event that the sale or use of such Product, or any part thereof, is enjoined, Seller shall, at 17. SEVERABILITY: The terms and conditions of the Order are subject to all applicable laws and
its own expense and its option, either: (a) procure for Purchaser, the right to continue using regulations. The unenforceability or invalidity of any provision of any of the writings that collectively
said Product; (b) replace same with a non-infringing Product; or (c) modify same so that it constitute the Order shall not affect the validity or enforceability of the remaining provisions thereof,
becomes non-infringing. but such remaining provisions shall be construed and interpreted in such a manner as to carry out
8.4 The obligations of Seller with respect to indemnification for third party product liability
fully the intent of the parties.
claims and patent infringement are solely and exclusively as stated herein. THE INDEMNITY 18. DISPUTE RESOLUTION: The parties agree to attempt to resolve disputes prior to submitting
OBLIGATIONS RECITED ABOVE ARE IN LIEU OF ALL OTHER INDEMNITIES WHATSOEVER, such disputes to determination by litigation by good-faith negotiations between knowledgeable,
WHETHER ORAL, WRITTEN, EXPRESS, OR IMPLIED. responsible representatives of each party who are fully authorized to settle any such dispute.
9. TERMINATION: 19. WAIVER: Seller's failure to insist on performance of any term, condition, or instruction, or failure to
9.1 Termination for Convenience: Purchaser, by written notice, shall have the right to terminate
exercise any right or privilege, or its waiver of any breach, shall not thereafter waive any such term,
the Order, in whole or in part, at any time for its convenience. Upon receipt of written notice, condition, instruction, right, or privilege.
Seller and any subcontractors and suppliers shall immediately cease all work with respect
to the Products. Within thirty (30) days of Seller's receipt of any termination notice, Seller
shall submit its claim for its costs of performance to the date of termination. The termination
charges shall consist of a percentage of the contract price of the Products reflecting the
LIMITED WARRANTY
Subject to the limitation expressed in subsequent paragraphs, Sprocket & Gear, Inc. and Sprocket & Gear Canada Inc., and
Sprocket & Gear de Mexico, S.A. de C.V., make the following warranties: We warrant that each of our products of manufacture will be free from
defects in material and workmanship under normal use and service for twelvemonths from the date of delivery to the original user. We will correct
any such defects in material or workmanship by repair or replacement of the product F.O.B. our plant. Tools will carry the following lifetime warranty:
If a tool fails to satisfactorily perform its designated use, it may be returned to the distributor from which such tool was purchased
and will be repaired or replaced without cost
THE FOREGOING WARRANTIES ARE EXPRESSLY IN LIEU OF ANY AND ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS EXPRESSED
OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHETHER ARISING
FROM STATUTE, COMMON LAW, CUSTOM, OR OTHERWISE. THE REMEDY OF REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT OR
TOOL SET FORTH IN THE FOREGOING WARRANTIES SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO ANY PERSON.
Charges for correcting defects will not be allowed, nor can we accept goods returned to us for repair or replacement, unless we are previously
notified of the defect in writing and the return or correction is authorized by us in writing. All warranty claims alleging defects of materials or
workmanship must be submitted in writing within thirty days of the discovery of a defect or such claim shall be considered waived. (This paragraph
is subject to the provisions of the Consumer Protection laws of Mexico.)
The foregoing warranties shall not apply to any products or tools which have been subjected to misuse, neglect or accident, or have been altered or
tampered with, or have been used beyond their normal useful or expected life, or which have had corrective work done thereon without our written
consent. WE SHALL NOT BE LIABLE FOR ANY LOSS, INJURY, EXPENSE, OR DAMAGE, WHETHER DIRECT, CONSEQUENTIAL, INCIDENTAL,
OR OTHERWISE, RESULTING FROM THE USE OF OUR PRODUCTS OR TOOLS OR CAUSED BY ANY DEFECT, FAILURE, OR MALFUNCTION OF
ANY PRODUCT OR TOOL, WHETHER A CLAIM FOR SUCH DAMAGES IS BASED UPON WARRANTY, CONTRACT, NEGLIGENCE, OR OTHERWISE.
Equipment manufactured by others, and included in our proposal, is not warranted in any way by us but carries only the manufacturer's warranty, if
any. No person has the authority to bind us to any representation or warranty other than the foregoing limited warranties as disclaimed
Sale of products and tools shall be governed by the laws of the State of Texas and of the United States of America. The provisions of the
United Nations Convention on Contracts for the International Sale of Goods or any local statute declaring it to have the force of law in the jurisdiction
of one of the parties shall not apply to products or tools supplied hereunder.
"YOU ARE HEREBY NOTIFIED THAT ANY ADDITIONAL OR DIFFERENT TERMS FROM THOSE CONTAINED IN THIS LIMITED WARRANTY ARE
OBJECTIONABLE. NO ADDITIONS OR CHANGES ARE BINDING ON UNLESS THEY ARE IN WRITING AND SIGNED BY AN AUTHORIZED
OFFICER."
NOTE: All past due invoices shall be payable to Sprocket & Gear, Inc., at P.O. Box 91588, Arlington, Tarrant County, Texas 76015-0088. All
past due invoices of Sprocket & Gear Canada Inc., shall be payable at 896 Meyerside Drive, Mississauga, Ontario, Canada L5T 1R9. All past
due Invoices of Sprocket & Gear de Mexico, S.A. de C.V., shall be payable at Km. 52 Carretera, Naucalpan-Toluca, Calle 3 Mz.7 Lt. 11, Parque
Industrial, Toluca 2000, Toluca, Edo. de Mexico, C.P. 50200. Reasonable attorneys' fees will be added if collection is forced.
RETURNED PRODUCT: When it is desired to return Product for credit or exchange, it is necessary that permission in writing first be obtained from
the nearest Sprocket & Gear sales office.
SHIPMENTS: If Seller is not able to meet Purchaser's shipment requirements and/or expected dates of shipment, Seller will not accept liability for
delays beyond Seller's control, nor will Seller accept cancellations unless a settlement has been agreed upon between all parties.
FREIGHT ALLOWANCE: Freight allowances are shown on the different product discount sheets. In cases where a Purchaser's specified routing of
any Order is more costly than the routing selected by Seller, the excess charges will be added to the net amount of the invoice. Weights shown in
supplier’s publications are approximate, and may not be used to determine qualifications for freight allowance.
CASH DISCOUNT: Unless modified in the Order or Invoice, payment shall be: A 1% cash discount will be allowed on invoices paid net 15 days. All
invoices are due in 30 days. Cash discount does not apply to other charges such as freight, postage, or delivery charges.
PUBLISHED DIMENSIONAL DATA: Due to changes in engineering and manufacturing processes and procedures, it becomes necessary, from time
to time, to make alterations to products. Such alterations may not be reflected in supplier’s publications. Therefore, if dimensions, specifications
or appearances represented by pictures or drawings or tables are critical in their applications, please consult the factory for clarification or certified
drawings.
Corporate Offices
USA
Sales & Manufacturing
Arlington, TX
817-258-3000 (FAX 817-258-3333)
Regional
Manufacturing Plants
Albemarle, NC
704-982-9555 (FAX 704-982-9599)
Atlanta, GA
404-292-8744 (FAX 404-292-7771)
Burleson, TX
817-295-7151 (FAX 817-447-3840)
Danielsville, PA
610-837-1841 (FAX 610-837-7337)
Ft. Worth, TX
817-258-3000 (FAX 817-258-3173)
Montpelier, OH
419-485-5515 (FAX 419-485-3565)
Sacramento, CA
916-441-7172 (FAX 916-441-4600)
HEAVY-DUTY
Nashville, TN
615-871-4730 (FAX 615-871-4125)
Pittsburgh, PA
724-452-4555 (FAX 724-452-5794)
CONVEYOR
Portland, OR
503-223-7261 (FAX 503-221-0203)
Tampa, FL
813-623-1705 (FAX 813-626-8953)
PULLEYS
Manufacturing Only
Abilene, TX • Clarksville, TX • Dallas, TX
Mansfield, TX • Paragould, AR
Cambridge, Ontario
CANADA
COPYRIGHT © 2016 • Martin SPROCKET & GEAR, INC. ALL RIGHTS RESERVED • PTC-HDCP 0805