Professional Documents
Culture Documents
RECEIVING BRACKET
BS EN 1999 - 1 - 1 : 2007 Eurocode 9 - Design of Aluminum Structures : General Structural Rules
LY
ON
LE
MP
fo.h
σ1.allow := = 227.27 MPa Allowable stress
γM1
fu.h
σ2.allow := = 236.00 MPa Allowable stress
LY
γM2
( )
σallow := min σ1.allow , σ2.allow = 227.27 MPa Governing allowable stress
ON
2.46kN 1.35 Maximum factored shear due to dead load
Vmax.dl := = 1.66 kN Referenc e: Appendix D-1
2
22.75kN 1.50
Vmax.wl := = 17.06 kN Unfactored shear at expansion joint
2
Comparing:
213.80 < 227.27
Since the maximum stress is less than the governing allowable stress,
Thus, the bracket is adequate in stress design.
See Appendix D-4 for the finite element analysis of receiving bracket
D-3.5 DEFLECTION CHECK
LY
ON
LE
Comparing:
0.49 < 1.00
Since the maximum deflection is less than the allowable deflection,
Thus, the bracket is adequate in deflection.
MP
See Appendix D-4 for the finite element analysis of receiving bracket
SA
APPENDIX D-4 FINITE ELEMENT ANALYSIS OF RECEIVING BRACKET
Stress Analysis Report of Receiving Bracket
Analyzed File: RECEIVING BRACKET FINAL.iam
Autodesk Inventor Version: 2018 (Build 220112000, 112)
Creation Date: 11/1/2017, 3:13 PM
Study Author: William Serrano
LY
Summary
Author William
Physical
Mass 1.31787 kg
ON
Area 231859 mm^2
Volume 1317870 mm^3
x=9.07076 mm
Center of Gravity y=234.455 mm
z=781.777 mm
Note: Physical values could be different from Physical values used by FEA reported below.
Static Analysis:1
LE
General objective and settings:
Design Objective Single Point
Study Type Static Analysis
Last Modification Date 11/1/2017, 3:06 PM
MP
Mesh settings:
Avg. Element Size (fraction of model diameter) 0.1
Min. Element Size (fraction of avg. size) 0.2
SA
Material(s)
Name Aluminum 6082 T6
Mass Density 2.7 g/cm^3
General Yield Strength 250 MPa
Ultimate Tensile Strength 295 MPa
Young's Modulus 70 GPa
Stress Poisson's Ratio 0.3 ul
Shear Modulus 26.9231 GPa
Part Name(s) RECEIVING BRACKET 1.ipt
RECEIVING BRACKET 2.ipt
RECEIVING BRACKET 3.ipt
RECEIVING BRACKET 4.ipt
RECEIVING BRACKET 5.ipt
RECEIVING BRACKET 2_CPY.ipt
RECEIVING BRACKET 3_CPY.ipt
Operating conditions
Force:1
Load Type Force
Magnitude 1660.500 N
LY
Vector X 0.000 N
Vector Y -1660.500 N
Vector Z 0.000 N
Selected Face(s)
ON
LE
MP
Force:2
Load Type Force
Magnitude 17062.500 N
SA
Vector X 0.000 N
Vector Y 0.000 N
Vector Z 17062.500 N
Selected Face(s)
LY
Fixed Constraint:1
Constraint Type Fixed Constraint
Selected Face(s)
ON
LE
MP
SA
Results
Reaction Force and Moment on Constraints
Reaction Force Reaction Moment
Constraint Name
Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)
0N 15.3515 N m
Fixed Constraint:1 15042.6 N -985.886 N 15.4389 N m -1.64021 N m
-15010.3 N 0Nm
Result Summary
Name Minimum Maximum
Volume 1317870 mm^3
Mass 3.55826 kg
Von Mises Stress 0.0225979 MPa 213.824 MPa
Displacement 0 mm 0.48899 mm
Figures
LY
ON
Displacement
LE
MP
SA