Professional Documents
Culture Documents
www.curtisinstruments.com 1
Models 1228
Permanent Magnet Motor Speed Controller
The Curtis Model 1228 Permanent Magnet Motor Speed Controller provide smooth and
precise operating control, providing maximum user confidence. Model 1228 fully complies
with European and US regulations and is fully programmable.
Ideal for OEM applications on three or four wheeled mobility aids, such as scooters, and for
light industrial equipment such as sweepers and scrubbers.
FEATURES
▶▶ Four quadrant, full bridge solid-state design. ▶▶ Auxiliary B+ and B- terminals and an inhibit input for
connecting to a battery charger.
Meets or complies with relevant US and ▶▶ Diagnostic information (throttle faults, low battery, etc.)
International Regulations is available through dash-mounted LED flash codes and
▶▶ The Curtis Model 1228 motor speed controller is designed Curtis handheld programmers.
to allow vehicle compliance with the EMC directive
89/336/EEC. Powerful Safety Features
▶▶ Designed to meet ANSI/RESNA WC14/21, ISO 7176-14, ▶▶ Inhibit input prevents driving during charging.
ISO 7176-21 and EN 1284.
▶▶ Control monitoring functions prevent driving with a
▶▶ All software documentation needed to support 510K defective throttle or associated wiring.
FDA filing is available.
▶▶ Fault monitoring capability of electromagnetic brake
functions is OEM selectable for individual vehicle
Fully Programmable requirements.
▶▶ Easily adapted to meet many specific scooter, sweeper ▶▶ If the keyswitch signal is turned Off while driving, the
scrubber or light industrial equipment applications. vehicle will decelerate normally, rather than stopping
▶▶ Seat lift function is programmable to allow a single abruptly.
controller to implement traction and lift functions. ▶▶ Where electromagnetic brake is used, push input
▶▶ Use of an electromagnetic brake is user selectable electrically releases brake for key-on pushing.
depending upon the type of application. ▶▶ If the vehicle is allowed to freewheel, the controller
will automatically limit the maximum speed to a preset
Easy to Install, Set-Up and Diagnose low speed.
www.curtisinstruments.com 2
Models 1228
Permanent Magnet Motor Speed Controller
FEATURES continued
▶▶ A user supplied external warning beeper can be installed Designed and Built for Optimum Reliability,
to alert bystanders when moving in reverse direction. Convenience and Economy
▶▶ The braking current limit is not decreased with high ▶▶ Conservative components rating provides years of trouble-
temperature, allowing the controller to provide maximum free operation, and lower warranty costs.
braking on extended downslopes.
▶▶ Power Saver shuts the controller Off after a programmable
time preserving the battery.
Smooth, Secure Driving Feel
▶▶ MultiMode™ control allows the user to select two entirely
▶▶ The feel of advanced closed-loop control algorithms gives different sets of driving parameters for different driving
the operator confidence in the handling, operation and modes, such as indoor and outdoor use.
control of the vehicle, whether it is driving at full speed,
on a steep hill or inching over a curb. ▶▶ Battery Discharge Indicator (BDI) driver provides battery
state-of-charge on a simple, user supplied voltmeter.
▶▶ Provides superior low speed control by compensating
for both motor and controller losses. ▶▶ Appropriate mounting or shielding is required to prevent
exposure of controller electronics when used in wet or
▶▶ The motor current limit is smoothly reduced as the high particulate environments. Environmental rating of
controller heats up beyond thermal limits, making controller is IP40.
available the maximum safe power under all conditions.
www.curtisinstruments.com 3
Models 1228
Permanent Magnet Motor Speed Controller
SPECIFICATIONS
Drive Current
Voltage Undervoltage Overvoltage
15 Second Rating 1 Hour*
Model Rating Cutback Cutoff
(Amps) 1 Minute* (Amps)
(Volts) (Volts) (Volts)
(Amps)
1228-24XX 24 70 70 35 17 36
1228-25XX 24 90 90 40 17 36
1228-34XX 36 70 70 35 26 48
DIMENSIONS mm
43
91
6.8
B+ B- M2 M1 LOGIC PROG
6.8
156
www.curtisinstruments.com 4
Models 1228
Permanent Magnet Motor Speed Controller
J10-14
BRAKE +
J10-6
**
BRAKE -
EM BRAKE
R
REVERSE J10-17
HORN J10-16
J10-9
STATUS J10-5
KSI
J10-15
BDI BDI
1228
B- J10-1
CONTROLLER
B+ J10-10
J10-18 SEAT LIFT
SPEED LIMIT POT J6 (OPTIONAL)
SPEED LIMIT POT M1
(OPTIONAL)
J10-3 POT HIGH J5
J10-13
POT LOW
THROTTLE
CONTROL
T
J4
J10-2
B- M2
J10-11 J3 TRACTION
BATTERY B+
CHARGER K1
J10-12 INHIBIT
J1
B+
GROUND
Tx DATA
Rx DATA
B- J2
+15V
J9-2
J9-3
J9-4
J9-1
is a trademark of Curtis Instruments, Inc. Specifications subject to change without notice ©2016 Curtis Instruments, Inc. 50053 REV G 9/16
www.curtisinstruments.com 5