Professional Documents
Culture Documents
Revision # 1
Revision Date 11/04/08
Functional Specification
USB-Link / EDL
Adapter Firmware Update Support
Table of Contents
Introduction
This document defines a mechanism to force USB-Link firmware update without the
usual version checks. The driver for this support is providing end users the ability to roll
back USB-Link firmware in the field, typically as a debugging tool.
Implementation
The USB-Link RP1210 vendor .ini file NXULNK32.ini has been modified to include the
following section and field:
[BinLoad]
Auto=FALSE
As indicated, the default value for “Auto” field is FALSE, which disables automatic
firmware update support in the USB-Link drivers.
In the event a user has a need to update the USB-Link firmware file to an older version
than that currently installed, the following sequence is performed:
Once firmware update has been completed, set “Auto=” field in device .ini
back to “FALSE” and save. This will prevent automatic firmware update sequence
in subsequent connections.
Change Log
Rev Author Sections Changed Change Description Date
1 Matt Roache All sections Initial creation. 11/04/08
(To update all dates and Table of Contents, press Ctrl + a, then press F9.)
(Current revision 1; last revision date: 11/04/08 Please do not disturb this line of text; it supports
automatic version numbering.)