Professional Documents
Culture Documents
CARPENTRY
DRAFTING
MASONARY
ELECTRICITY
1. What is the ampacity rating of the breaker used for convenience outlets general purpose circuits.
_____________
2. A form of electricity where the flow of the current is always the same in direction.___________
3. The force which opposes and reduces the flow of electrical current is recognized as ________________
4. Part of electrical which convert electrical energy into another form of energy to do work.___________
5. A part of an electrical circuit, consist of batteries, generator or a main electrical power which supplies
electricity.______________
6. Voltage required by an automatic pressure cooker having a resistance of 30 ohms when the current
flowing is 8 amperes. _________________
7. The law that states the current is directly proportional to the voltage and inversely proportional to
resistance is known as _____________
8. What amount of current does a 40-watt fluorescent lamp draw from a 220 volts power source?
_________________
9. There are several factors involved in electrical wiring installation but the foremost consideration is
_______________
10. What is the standard number or diameter of wire for receptacles or convenience outlet layout?
______________
11. To comply with the requirements of the Philippine Electrical Code the appropriate fuse rating for
lighting outlet should be _________
12. Planning and designing of electrical wiring plan is being done in order to ___________
13. In a 220-volt power line, three 50-watt incandescent bulbs are connected in parallel. How many bulbs
will light if one of the bulbs is open?
14. An electrical component used to control electrical circuit in two different locations.
15. In simple electrical connection, one of the lines of the source is connected to ___________
16. Means that there are three wires running________________
17. To conserve energy, what kind of lamp should be used in lighting fixtures? _________________
18. Size of electrical wire recommended for installing lighting fixtures ________________
ELECTRONICS
1. In the electronics symbol of transistor, the electrode with an arrow is the __________
2. You will find an electrode nearest the white band on a rectifier. What is it? ________________
3. An ordinary radio can be tuned to different stations. The electronic component responsible for this
function is the _____________
4. NPN type ____________________
5. AM radio is an RF band covering _________________
6. Two resistance with difference values in parallel circuit ______________________
7. When the diode is tested and the reading is zero, it means diode is ______________
8. If the arrow of a transistor symbol is pointing inward it tells us that the transistor is _____________
9. Tinning the tip of soldering iron refers to____________________
10. The condition of a loud speaker is tested more accurately using _____________
11. Non-polarized electronic component _______________
12. Schematic diagram ______________
13. The voltage rating found in as capacitor is called ______________
14. Diode that acts as a regulator is the ___________________
15. Resistor are parallel to 22Ω, 33Ω, 27Ω if R reconnected across ____________________
16. A type of current whose amplitude drops to zero periodically and is produced in rectifier is known as
_________________
17. The common cause of an erratic or distorted sound of a transistor radio is a defective
_______________
18. An appliance with 110 Volts AC supply is accidentally plugged to a 220 Volts AC outlet. What
component is usually destroyed? ________________________
19. The production of a magnetic field by current in a conductor. __________________