Professional Documents
Culture Documents
SECTION A
INTERIOR FINISHES
GENERAL: THE CONTRACTOR SHALL SUBMIT MATERIAL AND FINISH SAMPLES FOR ARCHITECT-OF
RECORD’S APPROVAL PRIOR TO FINAL INSTALLATION AND/OR APPLICATION.
h. Frameless Glass Doors and Partitions. Refer to Schedule of Doors and windows and Aor
approved based materials.
i. Others.
a. floor (field). Vitrified floor tiles), 400mm x 400mm, color = Medium Blue
b. floor (border and accent). Porcelain granite tiles, polished, 6mm thk. X 400mm x 400mm,
Color= #33 PL
c. Walls. Masonry wall surfaces. Paint finish, three coats, with surface preparation to receive
paint as per Paint’s Manufacturer’s Specifications; use masonry Neutralizer, concrete sealer
and putty. Use Multi-fleck Technicolor pain, color = #09 Basecoat; Pattern # 165 Wall finish.
Apply clear acrylic emulsion topcoat.
d. Wood wall surfaces. Paint finish, three coats, with surface preparation to receive paint as
per Paint’s Manufacturer’s Specifications; use masonry Neutralizer, concrete sealer and
putty. Use Multi-fleck Technicolor pain, color = #09 Basecoat; Pattern # 165 Wall finish.
Apply clear acrylic emulsion topcoat.
e. Suspended Ceiling System at common areas (stairs and stair access only). Use only non-sag
mineral fiber acoustic board, 609 mm x 609mm x 19mm thk. The acoustical board
manufacturer shall recommend the matching powder paint-coated aluminium T-runners,
ceiling hangers and accessories. Ceiling installation shall follow strictly the Manufacturer’s
Specifications.
f. Baseplate. 6mm x 150mm high granite tile wall base, bullnose edge; color = 33PL
g. Lighting. Use only 40 watts fluorescent lamps, warm white color in troffer light box with
mirrorized reflector and white powder coated aluminium louvers; high power factor (hpf)
ballast.
h. Blind cove. 200mm wide parallel to curtain wall.
i. Others.
1. Electrical switch plates and convenience outlets faces.
2. Hardware (Standard Wood Door Locksets and Wood Door Closers only)
3. Hardware (frameless Glass Doors and Partitions only). Use only Stainless Steel.
b. Walls. For both masonry and wood wall/ partition surfaces, provide acceptable surface
preparation to receive fabric-backed wallpaper.
c. Suspended Ceiling System at common areas (stairs and stair access only). Use only non-sag
mineral fiber acoustic board, 609 mm x 609mm x 19mm thk. The acoustical board
manufacturer shall recommend the matching powder paint-coated aluminium T-runners,
ceiling hangers and accessories. Ceiling installation shall follow strictly the Manufacturer’s
Specifications.
d. Door and Fixed Glass wall panels. Hollow core type door, clear semi-gloss lacquer finish.
Solid KD wood frames, semi-gloss lacquer beech finish with 6mm thk. Clear/ frosted glass.
e. Millwork.
1. Baseboard. 19mm x 100mm high KD wood baseboard, semi-gloss lacquer beech finish.
2. Door Casing. KD wood, semi gloss lacquer beech finish.
3. Ceiling Trim. 24mm x 25mm KD wood with ceiling gap alng base masonry wall.
f. Lighting. Use only 40 watts fluorescent lamps, warm white color in troffer light box with
mirrorized reflector and white powder coated aluminium louvers; high power factor (hpf)
ballast.
g. Others.
1. Electrical switch plates and convenience outlets faces.
2. Hardware (Standard Wood Door Locksets and Wood Door Closers only)
3. Hardware (frameless Glass Doors and Partitions only). Use only Stainless Steel.
b. Walls. For both masonry and wood wall/ partition surfaces, provide acceptable surface
preparation to receive fabric-backed wallpaper.
c. Suspended Ceiling System at common areas (stairs and stair access only). Use only non-sag
mineral fiber acoustic board, 609 mm x 609mm x 19mm thk. The acoustical board
manufacturer shall recommend the matching powder paint-coated aluminium T-runners,
ceiling hangers and accessories. Ceiling installation shall follow strictly the Manufacturer’s
Specifications.
d. Door and Fixed Glass wall panels. Hollow core type door, clear semi-gloss lacquer finish.
Solid KD wood frames, semi-gloss lacquer beech finish with 6mm thk. Clear/ frosted glass.
e. Millwork.
4. Baseboard. 19mm x 100mm high KD wood baseboard, semi-gloss lacquer beech finish.
5. Door Casing. KD wood, semi gloss lacquer beech finish.
6. Ceiling Trim. 24mm x 25mm KD wood with ceiling gap alng base masonry wall.
f. Lighting. Use only 40 watts fluorescent lamps, warm white color in troffer light box with
mirrorized reflector and white powder coated aluminium louvers; high power factor (hpf)
ballast.
g. White Board. Beech veneer side panels and crown moulding, duco finish center panel below
white board.
h. Others.
1. Electrical switch plates and convenience outlets faces.
2. Hardware (Standard Wood Door Locksets and Wood Door Closers only)
3. Hardware (frameless Glass Doors and Partitions only). Use only Stainless Steel.
a. Floor. floor (field). Vitrified floor tiles), 400mm x 400mm, color = Medium Blue
b. Walls. Glazed ceramic wall tiles, 200mm x 200mm, color= white (field) and Dark Brown
(boarder and accent). Wall base tiles (one tile layer) shall be the same as floor tile material and
color.
c. Door. Hollow core type with 6mm thk. Marine plywood face; duco paint finish.
d. Suspended Ceiling System at common areas (stairs and stair access only). Use only non-sag
mineral fiber acoustic board, 608 mm x 608mm x 6mm thk. The acoustical board
manufacturer shall recommend the matching powder paint-coated aluminium T-runners,
ceiling system installation shall follow standards for suspended ceiling system installation at
the general work areas. Use only latex paint finish for the CBB, in three coats, with surface
preparation to receive paint Manufacturer’s Specifications; use masonry neutralizer,
concrete sealer and putty.
e. Recessed Pinlights. Use aluminium housing with silver-reflector and white powder paint-
coated rim; use 23 watts, warm white light.
f. Fixtures and Fittings.
1. Flush Valve-type water closet. Series, model name/ color still to be specified.
2. Counter-type lavatory. Series, model name/ color still to be specified.
3. Lavatory Fittings. Aor-approved equivalent.
g. Accessories.
1. Wall hung toilet paper holder. Series, model name/ color still to be specified.
2. Exhaust fan. 250mm x 250mm ceiling mounted.
h. Others.
1. Electrical switch plates and convenience outlets faces.
2. Hardware (Standard Wood Door Locksets and Wood Door Closers only)
3. Hardware (frameless Glass Doors and Partitions only). Use only Stainless Steel.
SECTION B
EXTERIOR FINISHES
GENERAL: THE CONTRACTOR SHALL SUBMIT MATERIAL AND FINISH SAMPLES FOR ARCHITECT-OF
RECORD’S APPROVAL PRIOR TO FINAL INSTALLATION AND/OR APPLICATION.
1.1 FACADE. Use custom cut- granite tiles on all exposed masonry wall surface.
1.2 CURTAIN WALL SYSTEM. 6mm thk. Integral clear glass panels. Powder coated existing
aluminium frames.
1.3 MAIN ENTRANCE DOORS. 10mm thk. X 900mm x 2100mm framed tempered glass. Use
patch fittings and provide stainless C-type handle and standard hardware and locksets.
1.4 SIDEWALK AND RAMP FOR DISABLED
a.Floor. Fine crushed gravel or Aor approved equivalent.
b.Railing. 50 mm dia. Stainless steel pipe railing, polished.
1.5 EXTERIOR WALLS. Use masonry neutralizer, concrete sealer only as neede; use latex paint or
Aor approved equivalent.
1. Frame, supports, treads and risers. Primered and painted in quick dry enamel finish (3
coats)
1.7 OTHERS