This microcode update document describes 15 issues addressed in microcode version 21-14-20-00/00. The issues include problems with the Printout Tool, SVP messages, flash copy relationships, HDD performance and responses, OPEN package emulation information, FICON paths, side file overflows, and HDD installations. The microcode changes were made to DKCMAIN, SVP, HTP, and other components to resolve interface errors, improve messages and responses, and fix performance degradation issues.
This microcode update document describes 15 issues addressed in microcode version 21-14-20-00/00. The issues include problems with the Printout Tool, SVP messages, flash copy relationships, HDD performance and responses, OPEN package emulation information, FICON paths, side file overflows, and HDD installations. The microcode changes were made to DKCMAIN, SVP, HTP, and other components to resolve interface errors, improve messages and responses, and fix performance degradation issues.
This microcode update document describes 15 issues addressed in microcode version 21-14-20-00/00. The issues include problems with the Printout Tool, SVP messages, flash copy relationships, HDD performance and responses, OPEN package emulation information, FICON paths, side file overflows, and HDD installations. The microcode changes were made to DKCMAIN, SVP, HTP, and other components to resolve interface errors, improve messages and responses, and fix performance degradation issues.
RELEASED 03/10/06 Newly supported features and functions for Version 21-14-20-00/00 NONE The change of contents for Version 21-14-20-00/00 (1) Problem in displaying UVM info using Printout Tool Item Description Contents Configuration information containing UVM information displayed using Printout Tool displays improperly. The problem might occur when the configuration information containing UVM information is displayed using Printout Tool. Category Printout Tool Changed SVP (2) Improvement of SVP messages Item Description Contents In a maintenance operation, a wrong package may be replaced/installed/uninstalled by mistake The SVP messages have been modified to prevent the problem. Category SVP Changed SVP (3) [FCv2] SSB: 13B7, 8211 when FCv2 relationship is deleted Item Description Contents Deleting a relationship during a copy operation is in progress, SSB: 13B7, 8211 may occur. The problem might occur with all conditions met. 1. Perform a copy operation 2. Delete a relationship while a copy operation is in progress Category Flash Copy Version 2 Changed DKCMAIN (4) Printout Tool outputs DKC emulation information for OPEN package Item Description Contents When outputting CVS file configuration information of OPEN package using Printout Tool, DKC emulation, should display only for mainframe packages. The problem might occur when outputting the configuration information of an OPEN package using RAID450 Printout Tool. Category Printout Tool Changed SVP (5) Performance Degraded due to HDD Response Delay Item Description Contents DKC response degraded due to HDD response delay. Micro-program modified to fix the problem. HDD, whose response is delayed chronically, will block if mode 144 is set to ON. Category HDD Changed DKCMAIN (6) Improper OX_ID response of HDD Item Description Contents During a normal operation, correction copy occurred in 49 parity groups because the paired DKP was blocked. The problem might occur if Improper OX_ID response of HDD Category HDD Changed DKCMAIN
HDS Confidential 1of 3
(7) Created FCv2 relationship using F3-15 command received VOL Item Description Contents An FCv2 relationship whose target volume received a DIAGNOSTIC CONTROL (0xF3) command can establish with a TSO command. (The command rejects in the IBM specifications.) The problem might occur with all conditions met. 1. Use the volume to which the suborder 0x15 of the DIAGNOSTIC CONTROL (0xF3) command issued as an FCv2 target volume. 2. Create an FCv2 relationship with the TSO (FCESTABL) command. Category Flash Copy Version 2 Changed DKCMAIN (8) SSB=23C9 when Relationship Expansion (Disable->Enable) is performed Item Description Contents In case of INITIALIZE or Relationship Expansion (Disable-> Enable)/(Enable->Disable) being in progress, when varying the FCv2 volumes online, the host considered the FCv2 as an unsupported function so that the command for establishing the FCv2 relations for the volumes was rejected with SSB=23C9 reported. This problem occurs when varying the FCv2 volumes online under the following conditions. 1. FCv2 program products are available. 2. INITIALIZE or Relationship Expansion (Disable->Enable)/ (Enable->Disable) is in progress. Category Flash Copy Version 2 Changed DKCMAIN (9) Performance Degradation on Flash Copy Version2 Volume Item Description Contents The performance of sequential read using Flash Copy Version2 source and target volumes may be degraded (About two to three times, depends on the condition). This problem occurs when either A or B is met. A. Sequential read performed using RDTRK command to Flash Copy Version2 source volume (Example: DUMP job is performed to the source volume) RAID450:21-14-10-00/00 and higher B. - A sequential read is performed using a RDTRK command to the copied area in the Flash Copy Version2 target volume (Example: DUMP job is performed to the source volume) - RAID450:21-14-10-00/00 and higher Category Flash Copy Version 2 Changed DKCMAIN (10) Performance Degraded after Micro Upgrade Item Description Contents After upgrading the micro-program from version 21-07-29 to 21-11-02, the transaction of OpenVMS server delayed intermittently When a lock timeout occurs due to the configuration change after PS-ON, replacement, or micro-program exchange. Category OPEN Changed DKCMAIN (11) MIH due to Device Busy Item Description Contents Device Busy occurred with device not reserved. As a result, MIH occurred. The problem might occur with all conditions met. 1. FICON and unstable cable connection status between the host and the switch (not in link down status), the DKC starts up the TIN processing (path status check) but there is no response from the host or a timeout detected later at the DKC. 3. The host receives LBY during timeout processing. Category FICON Changed HTP
HDS Confidential 2of 3
(12) MIH when Establishing FCv2 Relations Item Description Contents When establishing FCv2 relations more than the maximum value or establishing FCv2 relations whose differential tables were insufficient, MIH occurred. In addition, SSB might report frequently and the response of the general operation on the SVP/Storage Navigator might degrade/fail. This problem occurs under either of the following conditions. 1. Establish FCv2 relations more than 16,384 (without relation extension) or 286,719 (with relation extension), 2. Establish FCv2 relations that use differential tables more than 2,048 (number of CUs is 4 or smaller) or 4,096 (number of CUs is 5 or larger). However, the number of differential tables should be the total of those shared and used by SI, SIZ, Hi-Copy, and Cruise Control. Category Flash Copy Version 2 Changed DKCMAIN (13) ESTABLISH/WITHDRAW Command Rejected Item Description Contents When issuing the ESTABLISH or WITHDRAW command to create or remove 16,000 or more FCv2 relations at a time, the command was rejected with SSB=9683, 9617, 9658 reported. This problem occurs with all conditions met. 1. Issuing the ESTABLISH or WITHDRAW command (with volume specified, and without EXT and DDSW specified) to create or remove 16,000 or more relations at a time, 2. All of the control tables (16,000) used. Category Flash Copy Version 2 Changed DKCMAIN (14) Host I/O error (SSB=ba3d) in the case of SF overflow in True Copy OPEN Async Item Description Contents A server crash occurred due to an I/O error at the time of Side File overflow. Too many AIX ERRPT logs of SC_DISC_ERR4 generated. In the True Copy OPEN Async pair, SSB=ba3d (Side File overflow control ended abnormally) was generated. With all the following conditions met, this problem may occur. A. DKCMAIN version 21-12-01 and later B. True Copy OPEN Async pair volumes C. Offloading Timer=0(Sec) is set (This setting suspends the pair immediately without controlling the host I/O inflow) D. Side File capacity= Side File threshold (This condition occurs continuously) The micro- program modified so that the server will not crash even if the Side file threshold is exceeded. Category True Copy Async Changed DKCMAIN (15) HDD Installation Failure due to HDD Blockade Item Description Contents When installing HDD to add multiple parity groups, all the HDD in HDU R17 and some in R16 were blocked, and the installation failed. Even though having taken all kinds of recovery actions, the problem remained unrecoverable. MSG SVP0734W reported. The micro-program modified to collect more information about the problem. Category MP Changed DKCMAIN
9960 MICROCODE VERSION 01-19-97-00/00 RELEASED 10/13/05 Newly Supported Features and Functions For Version 01-19-97-00/00 The Change of Contents For Version 01-19-97-00/00
9960 MICROCODE VERSION 01-19-96-00/00 RELEASED 10/02/05 Newly Supported Features and Functions For Version 01-19-96-00/00 The Change of Contents For Version 01-19-96-00/00