Professional Documents
Culture Documents
55 kW 74 HP @ 2500 rpm
OPERATING WEIGHT
5830 kg 12,830 lb
WA95-3
95-3
Hydrostatic transmission with thermostat valve, power shift under HYDRAULIC SYSTEM
full load (forward and reverse). System . . . . . . . . . . . . . . . . . . . . . . . . . . . .Closed load sensing
Gears Hydraulic pressure . . . . . . . . . . . . . . . . . . . . .190 bar 2755 psi
Forward/Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2/2 Auxiliary Hydraulics . . . . . . . . . . . . . . . . . . . 90 l/min. 23.8 gpm
Speeds . . . . . . . . . . . . . . . .1st gear 0 – 5.7 km/h 3.5 mph Lift time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.7 sec.
2nd gear 0 – 20.0 km/h 12.4 mph Lowering time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1 sec.
Standard Equipment
• Auxiliary hydraulics • Joystick for multi–function • Suspension seat, adjustable
• Back-up alarm drive/hydraulic system control high–comfort with arm and wrist rest
• Fuel gauge • Lights • ROPS canopy with panel cover
• Front axle weight (2) – driving (2) • 3" Seat Belt
(47 kg/each 104 lb/each) – flashing (4) • Temperature display for
• Hour meter – indicator, front and rear engine coolant
• Hydraulic 4–point quick coupler – work (2) halogen • Tow bar
• Hydrostatic drive with high each front and rear • Tires, Michelin, 425/75 R 20, XT 27 TL
and low speeds • Quick check panel
Optional Equipment
• Air conditioning • Bucket, multi–purpose, quick attach, • High speed option (19mph)
• Bucket, general purpose, quick attach with 6 teeth, without cutting edge • Ride control, electronically controlled
with bolt-on cutting edge 1.1 m3 1.44 yd3 0.9 m3 1.2 yd3 capacity suspension system (ECSS)
capacity • Counterweight, rear 100 kg 220 lb • ROPS cab with heater
• Bucket, general purpose, quick attach tipping load @ full articulation
– front and rear wiper/washer
with teeth 1.1 m3 1.44 yd3 capacity increase170 kg 374 lb
– heated rear window
• Bucket, light material, quick attach, • Cutting edge, bolt-on for (2100mm) 6'1" – tinted glass, all–round
without teeth, without cutting edge bucket
• Tires, Dunlop (ILOS), 455/70 R 20 SPT
1.25 m3 1.63 yd3 capacity • Electrical switch, master disconnect 9 L2
• Forklift tines, (1200 mm) 3'11" length
WA95-3
COMPACT WHEEL LOADER
Bucket weight without teeth kg lbs. 390 858 410 902 670 1474
Static tipping load (straight) kg lbs. 4860 10,692 4865 10,703 4455 9801
Static tipping load (at 40° angle) kg lbs. 4200 9240 4205 9251 3805 8371
Max. breakout force kN lbs. 72.5 16,313 62.5 14,063 69.3 15,593
Operating weight kg lbs. 5830 12,830 5850 12,870 6115 13,453
K Reach at 45° mm ft. in. 760 2'6'' 840 2'9'' 765 2'6''
L Dumping height at 45° mm ft. in 2740 9'0'' 2655 8'9'' 2730 9'0''
M Height to upper edge of bucket mm ft. in 4490 14'9'' 4475 14'8'' 4425 14'6''
N Digging depth mm ft. in 75 3'' 75 3'' 80 3''
O Bucket height when traveling mm ft. in 340 1'1'' 340 1'1'' 340 1'1''
P Overall length mm ft. in 5560 18'3'' 5680 18'8'' 5730 18'10''
Q Bucket width mm ft. in 2150 7'1'' 2100 6'11'' 2112 6'11''
R2 Turning circle over bucket mm ft. in 4455 14'7'' 4480 14'8'' 4440 14'7''
* All data with tires 455/70 R 20 SPT 9. ††(Rear counterweight will increase tipping load values, refer to optional equipment for details.)
This specification sheet may contain attachments and optional equipment that are not available in your area. Please contact your local Komatsu
Utility distributor for those items you may require. Materials and specifications are subject to change without notice.
Form No. KUSS110-03 © 2002 Komatsu Printed in USA PLI (5.0M) PL Printed in USA 0302
Komatsu Utility
Division of Komatsu America International Company
PO Box 8112 • Vernon Hills, IL 60061-8112
website: www.komatsuutility.com