SKETCHES AND FIGURES 10% FREE BODY DIAGRAM 25% NEATNESS AND ORGANIZATION 15% CORRECT COMPUTATION 50% TOTAL 100%
1.) The boom DF of the jib crane and the column DE
have a uniform weight of 50 lb/ft. If the hoist and load weigh 300 lb, determine the resultant internal loadings in the crane on cross sections through points A, B, and C.
Engr. Bryan Dale P. Yu MECHDEF-CE Page 1 of 6
PLATE 1 – INTERNAL LOADINGS
2.) Determine the resultant internal loadings on
the cross section through point D. Assume the reactions at the supports A and B are vertical.
Engr. Bryan Dale P. Yu MECHDEF-CE Page 2 of 6
PLATE 1 – INTERNAL LOADINGS
3.) Determine the internal normal force , shear
force and bending moment at the required points of the following beams shown:
Engr. Bryan Dale P. Yu MECHDEF-CE Page 3 of 6
PLATE 1 – INTERNAL LOADINGS
4.) Determine the internal normal force , shear
force and bending moment at C of the following beams shown:
Engr. Bryan Dale P. Yu MECHDEF-CE Page 4 of 6
PLATE 1 – INTERNAL LOADINGS
5.) Determine the internal normal force , shear
force and bending moment at C of the following beams shown:
Engr. Bryan Dale P. Yu MECHDEF-CE Page 5 of 6
PLATE 1 – INTERNAL LOADINGS
6.) Determine the internal normal force , shear
force and bending moment at C of the following beams shown:
Construction and Building Materials Volume 23 Issue 1 2009 (Doi 10.1016 - J.conbuildmat.2007.12.004) D.A. Adesanya A.A. Raheem - A Study of The Workability and Compressive Strength Characteristics o