You are on page 1of 1019

GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

BRIDGE & APPROACH ROAD AT ARIYANKUPPAM

PUDUCHERRY SCHEDULE OF RATES

PUDUCHERRY REGION

2013 - 2014
(Revised)
GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

PUDUCHERRY SCHEDULE OF
RATES

PUDUCHERRY REGION

2013 - 14
(Revised)
PREFACE

1. Puducherry Schedule of Rates 2013-14 are updated edition of the PSR 2011-12.

2. The Puducherry Schedule of Rates 2013-14 incorporates all the items included in the
PSR 2011-12 and correction slip issued from time to time besides new items. The
specifications of the items have been upgraded to the CPWD specification 2007. The
Schedule of Rates is based on the current market rates for materials and labour. The basic
rates have been obtained from Department of Economics & Statistics, all the Circles,
Divisions, Builders Association of India and from the leading manufacturers for branded
products, local market and DGS&D rates and the same have been finalized in the PSR
meeting. The finished rates were arrived by using CPWD analysis of rates 2007 and finalized
by convening the PSR Standing Committee meeting on 22/12/2013 as per O.M.No.4090/
669/06-PW (B1) dt: 12/01/2007.

3. The Standing Committee of Schedule of Rate, under the Chairmanship of Thiru


S. MANOHAR, Chief Engineer of Public Works Department, Puducherry constituted , with the
following members.
TVL:

S. Manohar
Chairperson
Chief Engineer, PWD

S. Manohar
Member
Superintending Engineer - Circle-I, PWD

N. Manthaiyan
Member
Superintending Engineer - Circle-II, PWD

P. Swaminathan
Superintending Engineer – Circle-III, PWD Member

S. Vaittianadane
Member
Director of Economics & Statistics

N.Sumathi Member
Joint Secretary (Works)

C.Rajan
Member
Executive Engineer (Planning) - Central office

J. Jayakumar
Member
Executive Engineer - Public Health, PWD

S.Mahalingam
Member
Executive Engineer – Irrigation, PWD

V.Arul Mozhi
Planning Officer Member
Represented on behalf of Senior Accounts Officer

A.Nagaraju
Executive Engineer – Designs , PWD Member Secretary
4. The PSR Standing Committee meeting was convened on 22/12/2013 for Puducherry
Region and finalized the basic rates of materials and labourers In the presence of all the
Executive Engineers, contractors, members of Builders Association of India and PWD
Registered Contractors Association, Puducherry.

5. The Delhi Schedule of Rates 2012 has been taken as a reference for inclusion of new
materials in respect of building works. Finished rates for building works have been adopted
as per the CPWD analysis of rates 2007. The specifications and analysis for the items under
bridge works are based on the Ministry of Road Transport and Highways (MORTH & MOST).
Labour rates and material rates have been finalized for the regions namely Puducherry,
Karaikal and Mahe and exclusive Schedule of Rates has been brought out separately for
each region.

6. The rates and specifications incorporated in the PSR 2013-14 will become effective
from 01/10/2013.

7. For works which are in riverbed (for river over 20 metre widths only) add 10% extra on
labour, earthwork and conveyance of materials within the riverbed. This extra percentage
should not be allowed for the cost of materials.

8. Within the Central Jail Compound 10% extra and Sub-Jail compound 5% extra is
allowed over the rates of labour, rates of works involving labour and rates for conveyance of
materials for the portion inside the jail campus (i.e. for the distance within the Jail
Compound).

9. The current rate contracts running contracts in existence have been adopted for
materials which are having rate contracts and running contracts.

10. Hire charges for plants, rates for materials, labourers and technical staff indicated in
this PSR are only to prepare the analysis of rates.

11. The works which are to be executed during night times due to heavy traffic during
day times and for various technical and administrative reasons and for major building works
which involves works during night times for continuity, will involve extra expenditure by way of
making arrangements of lighting and special transportation for working parties to odd hours.
In the light of the above nature, the Executive Engineers at their discretion may exercise their
judgment and cater for the additional cost to the maximum extent of 5%, keeping in view,
the severities and factors mentioned above. Support details for the extra cost based on
actual site conditions in specific cases will have to be provided with proper justification.

12. Suggestions from all sectors are invited for the improvement and refinement of this
schedule of rate.
SALIENT FEATURES OF PUDUCHERRY SCHEDULE OF RATES 2013-14

1.0 This Puducherry Schedule of Rates 2013-14 is the revised edition of Puducherry Schedule
of Rates 2011-12. But this PSR is totally based on the CPWD analysis of rates 2007.

2.0 This PSR 2013-14 incorporates items of PSR 2011-12 with all correction slips. The
nomenclature of many items has been improved by making it more generic and
comprehensive.

3.0 Efforts have been made to introduce items pertaining to execution of different works by
using various electrical and mechanical equipments i.e. excavators, tower cranes,
mobile cranes, mechanical platforms, batch mix plant, transit mixers and pumps, piling
rigs, pneumatic cutters, chisels, chippers, hammers etc. Built-in provision has been
taken in the analysis of rates for new construction technology/mechanisation.

4.0 The new items introduced in this PSR will have new code nos. as indicated in the list of
basic materials.

5.0 Generally, the basic rates of materials, incorporated in the schedule, are pertaining to
materials conforming to BIS standards/CPWD specifications/materials of best quality
available in the market.

6.0 Lump sum provision of labour / T&P is replaced with mechanisation inputs. Prominent
items incorporating mechanization are earthwork in excavation, RMC/ BMC, brick work
in superstructure above floor-V level, road work, dismantling of RCC work, dismantling of
CC and flexible pavements, pile work etc.

7.0 In this PSR 2013-14 few new items are added and deleted in the following Sub head wise

7.1 Earth work: Due to non availability of good earth the code no’s 2.27A , 2.27C
2.27D items are deleted . In this chapter gravel Items are added vide code
no.2.27A.1 , 2.27C.1 , 2.27D.1.

7.2 Reinforced Cement Concrete: In this chapter Degreasing and cleaning the
metal surface and corrosion proof Zinga coating to reinforcement items are
deleted vide code no 5.22.10 , 5.22.11.
7.3 Wood Work: In addition to the existing 65mm Godrej Navtal lock 6 levers , 7
levers lock also added vide code no.9.134.2. Code.no.9.29.2 item deleted.

7.4 Flooring: In this chapter Precast terrazzo tiles and chequred terrazzo tiles using
items code.no’s 11.16.1, 11.16.2, 11.16.3, 11.16.4, 11.18.1, 11.18.2, 11.18.3, 11.18.4 ,
11.19.1, 11.19.2, 11.19.3, and 11.19.4 are deleted.

7.5 Roofing: In this chapter code no.12.18 mud phaska item deleted.

7.6 Repairs to Buildings: In this chapter Mud mortar code no 14.24 item is deleted.
7.7 Drainage: In this chapter using of stoneware pipes item’s are deleted vide code
no 19.1.1, 19.1.2, 19.1.3, 19.1.4, 19.1.5, 19.1.6, 19.32.1, 19.32.1K, 19.33 .Using of
UPVC soil waste pipes 110 mm dia and 75 mm dia 6kg/sq.cm (type –B) items are
included vide code no’s 19.32.1A, 19.32.1C, 19.33A, 19.33.1, 19.33.1A, 19.33.1B,
19.33.1C, 19.33.1D, 19.33.1E, 19.33.2, 19.33.2A, 19.33.2B, 19.33.2C, 19.33.2E,
19.33.2F.

7.8 Pile Work: Mechanical equipments such as hydraulic piling rig, crane, bentonite
pump, vibrating pile driving hammer etc., have been introduced in place of lump
sum provisions. The labour coefficients have been reduced due to the provisions
made for mechanical equipments. Piles up to 1500mm dia have been
incorporated.

7.9 Horticulture & Landscaping: In this Chapter code no 23.2 Supplying and stacking
of good earth item is deleted.

7.10 Irrigation : In this chapter code no 30.3 Collection of earth and banking the earth
……,item is deleted and 30.3A Collection of gravel and banking the gravel …..,
item is included

7.11 Water supply (Public health)- In this chapter new items Supply and installation of
DI D/F gate valves – 150mm dia , 200mm dia, 300mm dia, 400mm dia, 150mm –
D/F gate valve (VAG, AVK, Fouress) and Electromagnetic Bulk Flow meter –
100mm dia, 200mm dia, 300mm dia and 400mm dia are included vide code no’s
31.300.1A, 31.300.1B, 31.300.1C, 31.300.1D,31.300.1E, 31.300.2A, 31.300.2B,
31.300.2C and 31.300.2D respectively.

8.0 In Road Work (Morth) : Traffic Signs , Markings & other road appurtenances – In this
chapter in using of M.S. angle , Tee , Channel , flat material the weights are corrected as
per actuals in the following code numbers: – 8.4A, 8.4B, 8.4C, 8.4D, 8.4E, 8.4F, 8.4G, 8.5,
8.6, 8.7A, and 8.7B. Fabrication , supply and fixing of informatory board new items are
included vide code no. 8.31 and 8.32.

9.0 In bridge work (Morth) ; Substructure: In this chapter Providing weep holes using of PVC
pipe 110mm dia 6kg/sq.cm item is included as code no.13.9

10.0 Additional features included in the PSR 2013-14 (Revised):


10.1 The finished rates for road works items in MOST and MORTH specifications are
reworked, as done earlier in the case of addendum for PSR 2011-12
10.2 The existing code numbers are suffixed with “MO” for all items in “MOST”
specifications and with “MR” for the items in Chapter 12 only in “MORTH”
specifications.
10.3 The item in Code No. 12.64 (Aluminium Composite Panel) is deleted and
modified specification with new rates is incorporated considering the present
ground reality as item code no:12.64A
10.4 The items in Code No. 5.8A and 5.8B using Bitumen grade 80/100 have been
deleted and new items using Bitumen grade 60/70 are incorporated with Code
Nos. 5.8A.1 and 5.8B.1, based on the recommendations of MORTH specifications
for Roads and Bridges (4th Revision).

11.0 Due care has been taken to bring out the Schedule of Rates as correctly as possible. It
is, however, possible that some errors might have crept in. In case any error or omission
is noticed, it may be brought to the notice of the Executive Engineer, Computer Design
Centre, PWD, Puducherry.

12.0 Suggestions for improvement are welcome.


ACKNOWLEDGEMENT

The Schedule of Rates 2013-14 was finalized by the Standing Committee of Puducherry
Schedule of Rates under the Chairmanship of Thiru S.Manohar, Chief Engineer, PWD,
Puducherry and is gratefully acknowledged. Without the guidance and encouragement of
whom, this work would have not become a success.

The sincere efforts taken by the PSR Standing Committee of Puducherry comprising of
Thiru S.Manohar, Chief Engineer, Thiru N.Manthaiyan, Superintending Engineer (Circle-II),
Thiru P.Swaminathan, Superintending Engineer (Circle-III), officials from the Directorate of
Economics and Statistics, Joint Secretary (Works), Thiru A.Nagaraju, Executive Engineer
(Designs), Thiru C.Rajan , Executive Engineer (Planning) all other Committee Members and
other staff of the Computer Design Centre, who have put up sincere effort in bringing out this
Schedule of Rates 2013-14 is acknowledged.

In this juncture the sincere efforts put forth by the committee members in bringing out
this Schedule of Rates are most acknowledgeable. Similarly the sincere efforts and strenuous
work done in compiling the new PSR 2013-14 through the computer software and based on
the CPWD analysis 2007 by the officials and staff of Computer Design Centre viz.
Thiru P.Dhanasegaran , Assistant Engineer, Thiru S.SURESH, Assistant Engineer, Tmt. M. Sarassou,
Junior Engineer, Thiru T. Sivakoumar, Work Assistant, Thiru R.Batmanabane, Work Assistant,
Thiru K.Venkatachalapathy, Thiru S.Saravanakumar, Tmt. V.Veerasundari Rathna, Draughtsman
and Ms. A.A.J.Jacintha, Draughtsman are to be congratulated.

The encouragement, enthusiasm and involvement of all the Superintending Engineers,


Executive Engineers, Architect and all those who have directly and indirectly participated in
bringing out this Schedule of Rates are also acknowledged.
CONTENTS

Sl. No Name of Sub-Head Page No.


BASIC RATE

1. Hire Charges of Plants 1


2. Labour 2
3. Materials For Building Work & Services 5
4. Hire Charges, Labour & Materials For Road Work 68
5. Hire Charges, Labour & Materials For Bridge Work 75
6. Basic rates for Public Health Chapter – 31, 32, 33 79
7. Carriage 123
BUILDING WORK
2. Earth Work 125
4. Concrete Work 138
5. Reinforced Concrete Work 146
6. Brick Work 159
7. Stone Work 166
8. Marble Work 180
9. Wood Work 184
10. Steel Work 231
11. Flooring 238
12. Roofing 259
13. Finishing 280
14. Repairs to Buildings 292

15. Dismantling & Demolishing 305

16. Miscellaneous Building Works 315

SERVICES
17. Sanitary Installations 322
18. Water Supply 347
19. Drainage 399
20. Pile Work 421
21. Aluminum Work 439
22. Water Proofing 447
23. Horticulture and Landscaping 456
30. Irrigation 462

31. Water Supply (Public Health) 471


Sl. No Name of Sub-Head Page No.

32. Sewerage (Public Health) 649

33. Miscellaneous (Public Health) 680

34. OHT Works 695

35. Subsoil Exploration 697

ROAD WORK (MOST)

4. Granular Sub-Base 701

6. Bituminous Construction 702


7. Culverts 704
ROAD WORK (MORTH)
2. Site Clearance and Dismantling 709
3. Earth Work 718
4. Granular Sub-Base 725
5. Base and Bituminous Construction 741
6. Cement Concrete Pavement 748
8. Traffic Signs, Marking & Other Road Appurtenances 750
9. Pipe Culverts 761
10. Maintenance of Roads 762
11. Horticulture 764
12. RBI Grade 81 768
BRIDGE WORK (MORTH)
12. Foundation 770
13. Sub Structure 788
14. Super Structure 795
15. River Training & Protection Works 813

16. Repairs & Rehabilitation 815


CEMENT CONSUMPTION STATEMENT
1. Building Work 817
2. Road work (MOST) 945
3. Road work (MORTH) 948
4. Bridge Work 960
BITUMEN CONSUMPTION STATEMENT (MOST & MORTH)
1. Road Work 995
BASIC RATE
PUDUCHERRY REGION

BASIC RATES FOR BUILDINGS WORKS

Sl.No. Code No. Description Unit Rate in Rs.

HIRE CHARGES OF PLANTS

1 0002 Hire charges of Concrete Mixer 0.14 cubic metre Day 1600.00

2 0003 Hire charges of Diesel Road Roller - 8 to 10 tonne Day 3250.00

3 0004 Production cost of concrete by batch mix plant cum 290.00

4 0006 Hire charge of Spraying machine including electric charges Day 250.00

5 0009 Pumping charges of concrete including h/c of pump,piping cum 110.00


work&accessories etc.
6 0010 H/C of derrick monkey rope day 675.00

7 0011 H/C of Pump set of capacity 4000 litres/ hour day 800.00

8 0012 Vibrator (Needle type 40mm) day 650.00

9 0013 Machine for rubbing of floors day 300.00

10 0017 Hire and running charges of tipper day 3500.00

11 0018 Hire and running charges of loader day 5600.00

12 0019 Hand grinder for mirror polish day 100.00

13 0020 Hydraulic excavator(3D)with driver and fuel day 7000.00

14 0020A Crane hire charges including all operation upto 8T perMT 40.00

15 0020B Crane hire charges including all operation upto 8T per hour 800.00

16 0024 Hire&runningchargesofhydraulicpiling rig with power unit etc. day 30000.00


including complete
17 0025 Hire&running charges of light crane day 3500.00

18 0026 Hire&running charges of bentonite pump day 4000.00

19 0027 H/R charges of vibrating pile driving hammer complete power day 28000.00
unit & accessories
20 0028 H/R charges of crane above 8 tonne to 20 tonne capacity per hour 1000.00

21 0029 H/C for transit mixer cum 420.00

Puducherry Page 1
Sl.No. Code No. Description Unit Rate in Rs.

22 0029A H/C for transit mixer (beyond 10km lead) cum 42.00

23 0037 Mobile crane day 3500.00

24 0038 Tractor with ripper attachment day 3000.00

25 0039 Tractor with trolley day 2800.00

26 0040 Air compressor 250 cfm with two leads for pneumatic day 2600.00
cutters/hammers
27 0041 Joint cutting machine with 2-3 blades day 850.00

28 1399 Hire charge for pipe cutting machine day 250.00

29 1400AA Hire charge for pipe grinding machine day 230.00

Hire charges for machinery for irrigation work

Excavator

30 60 Hr. 850.00

31 100 Hr. 1300.00

32 120 Hr. 1550.00

33 200 Hr. 2400.00

Note:Above hire charges includes cost of services of operating


staff and supply of lubricating oil and fuel charges.

LABOUR

34 0100 Bandhani day 300.00

35 0101 Bhisti day 280.00

36 0102 Blacksmith 1st class day 375.00

37 0103 Blacksmith 2nd class day 350.00

38 0111 Carpenter 1st class day 500.00

39 0112 Carpenter 2nd class day 450.00

40 0113 Chowkidar day 300.00

41 0114 Beldar (Mazdoor-1) day 320.00

Puducherry Page 2
Sl.No. Code No. Description Unit Rate in Rs.

42 0114A Survey Assistant each 300.00

43 0114B Wooder I class each 350.00

44 0115 Coolie day 300.00

45 0116 Fitter (grade 1) day 500.00

46 0117 Assistant fitter or 2nd class fitter day 450.00

47 0119 Glazier day 450.00

48 0122 Mason (for plaster of paris work) 1st class day 550.00

49 0123 Mason (brick layer) 1st class day 550.00

50 0124 Mason (brick layer) 2nd class day 480.00

51 0125 Mason (for plain stone work) 2nd class) day 450.00

52 0126 Mason ( for ornamental stone work) 1 st class day 600.00

53 0127 Driver ( for Road roller, Concrete mixer , Truck etc.,) day 450.00

54 0128 Mate day 330.00

55 0130 Mistry day 330.00

56 0131 Painter class I day 450.00

57 0132 Rock Excavator day 350.00

58 0133 Rock Breaker day 350.00

59 0134 Rock driller day 350.00

60 0135 Stone Chiseller day 350.00

61 0139 Skilled Beldar ( for floor rubbing etc.,) day 330.00

62 0141 White washer day 350.00

63 0155 Mason (average) day 515.00

64 0156 Carpenter (average) day 475.00

65 0157 Operator (Pile / Special machine) day 420.00

Puducherry Page 3
Sl.No. Code No. Description Unit Rate in Rs.

66 0159 Skilled torch operator for laying tack day 420.00

67 0160 Electrician helper day 420.00

68 0163 Mehanic helper each 420.00

69 0193 Electrician class I(ITI passed with wireman licence from day 450.00
competent authority)
70 0191 Mazdoor category III day 290.00

71 0192 Painter class II day 400.00

72 0158 Mechanic (Pile) day 400.00

73 0159 Electrician Class II (ITI passed with licence from Elec.dept) day 420.00

74 0161 Mechanic Grade -I day 450.00

75 0162 Mechanic Grade -II day 400.00

76 0164 Pump driver Grade -I (ITI Passed) day 450.00

77 0165 Sewer Cleaner day 400.00

78 0166 Sweeper day 300.00

79 0167 Thatcher day 300.00

80 0168 Welder Class -I (ITI Passed) day 450.00

81 0169 Welder Class -II day 400.00

82 0170 Well Sinker Class -I day 500.00

83 0171 Well Sinker Class -II day 450.00

84 0172 Technical Assitant Grade -I (B.E.Passed) day 720.00

85 0173 Technical Assitant Grade -II (Diploma passed or B.E.failled) day 650.00

86 0174 Technical Assitant Grade -III (ITI passed or Diploma failled) day 600.00

87 0175 Technical Assitant Grade -IV (ITI failed or having certificate day 500.00
issued by govt.of Puducherry)
88 Data Entry operator Gr-I (Degree with computer / PGDCA or day 650.00
equivalent)
89 0176 Laboratory Assistant Grade -I (PG in science) day 600.00

Puducherry Page 4
Sl.No. Code No. Description Unit Rate in Rs.

90 0177 Laboratory Assistant Grade -II (UG in science) day 550.00

91 0178 Laboratory Assistant Grade -III (Degree other than Engg./ day 500.00
Science to work as work inspector , Graduate Junior clerk and
92 0179 work
Rakerclerk) day 300.00

93 0180 Driver - Light vehicle day 400.00

94 0181 Driver - Heavy vehicle (Lorry , Roller, Tractor) day 500.00

95 0194 Driver - Earth moving equipments day 500.00

96 0182 Cleaner (Heavy vehicles / Roller) day 300.00

97 0183 Watchman Grade-I (Kurkha) day 350.00

98 0184 Watchman Grade-II (Others) day 300.00

99 0185 Drum mixer (Rotary for hot process) day 275.00

100 0186 Helper for Rig day 275.00

101 0200A Driller Grade-I (Pile) day 500.00

102 0200B Driller Grade-II (Pile) day 450.00

103 0200C Mazdoor (Heavy for Pile work) day 450.00

104 0200D Genset Operator day 300.00

105 0200E Site supervisor for pile operation day 575.00

MATERIALS FOR BUILDING WORK

Note: These rates are at site of work and are exclusive of


contractors profit , but includes octroi , royalty , sales tax extra
106 0222 Seam bolts and nuts 6mm dia and 25mm long 10nos 33.00

107 0223 Non - asbestos fibre cement corrugated sheet 6mm thick sqm 225.00

108 0224 Non - asbestos fibre cement close fitting adjustable ridge metre 220.00

109 0225 Non - asbestos fibre cement corrugate serrated adjustable metre 185.00
ridge
110 0226 Non - asbestos fibre cement plain wing adjustable ridge metre 200.00

111 0227 Non - asbestos fibre cement unserrated adjustable ridge for metre 210.00
hips

Puducherry Page 5
Sl.No. Code No. Description Unit Rate in Rs.

112 0228 Non - asbestos fibre cement corrugated apron piece metre 135.00

113 0229 Non - asbestos fibre cement eaves filler piece each 100.00

114 0230 Non - asbestos fibre cement north light curves meter 215.00

115 0231 Non - asbestos fibre cement ventilator curves each 285.00

116 0232 Non - asbestos fibre cement barge boards metre 250.00

117 0233 Non - asbestos fibre cement ridge finial pair 90.00

118 0234 Non - asbestos fibre cement special north light curves each 295.00

119 0235 Non - asbestos fibre cement S type louvers each 175.00

120 0236 Non - asbestos multi purpose fibre cement board 6mm thick sqm 195.00

121 0237 Non - asbestos multi purpose fibre cement board 8mm thick sqm 260.00

122 0285 Brick aggregate (Single size) : 63 mm nominal size cum 400.00

123 0286 Brick aggregate (Single size) : 50 mm nominal size cum 425.00

124 0287 Brick aggregate (Single size) : 40 mm nominal size cum 450.00

125 0289 Brick aggregate (Single size) : 25 mm nominal size cum 500.00

126 0288 Brick aggregate (Single size) : 20 mm nominal size cum 500.00

127 0291 Stone aggregate (Single size) : 63 mm nominal size cum 650.00

128 0292 Stone aggregate (Single size) : 50 mm nominal size cum 700.00

129 0293 Stone aggregate (Single size) : 40 mm nominal size cum 800.00

130 0294 Stone aggregate (Single size) : 25 mm nominal size cum 1050.00

131 0295 Stone aggregate (Single size) : 20 mm nominal size cum 1050.00

132 0296 Stone aggregate (Single size) : 12.5 mm nominal size cum 900.00

133 0297 Stone aggregate (Single size) : 10 mm nominal size cum 900.00

134 0298 Stone aggregate (Single size) : 6 mm nominal size cum 650.00

135 0300A Casurina posts 80mm dia metre 40.00

Puducherry Page 6
Sl.No. Code No. Description Unit Rate in Rs.

136 0300B Casurina posts 100mm dia metre 47.00

137 0300C Casurina posts 125mm dia metre 53.00

138 0302 Safeda ballies 125 mm diameter metre 50.00

139 0302A Casurina posts 100 to 130mm dia metre 50.00

140 0302B Casurina posts 150 mm dia metre 84.00

141 0304 Bajri cum 400.00

142 0305 Bamboo 25mm dia 2.5 metre long score 200.00

143 0308 Bhusa quintal 200.00

144 0309 Paving bitumen S-90 of approved quality tonne 48335.86

145 0310 Bitumen emulsion tonne 45301.44

146 0313 Blown type petroleum bitumen of penetration 85/25 of tonne 48335.86
approved quality
147 0314 Bitumen hot sealing compound : grade A Kg 48.33

148 0316 Bitumen solution primer of approved quality litre 45.30

149 0318 Bitumen felt fibre (Vegetable or animal) : type 2 grade 1 sqm 48.00

150 0322 Biutmen felt : type 3 grade 1 sqm 48.00

151 0324 Coal tar litre 45.30

152 0325 Blasting Powder kg 30.00

153 0326 Blasting fuse (fuse wire) each 12.00

154 0328 White face insulating board :12 mm thick sqm 240.00

155 0332 Natural colour insulating board : 12mm thick sqm 180.00

156 0336 Flame retardent face insulating sqm 210.00

157 0339 Flame retardant face insulating,impregnated fibre board 12 mm sqm 320.00
thick
158 0341 Flat pressed 3 layer particle board (medium density) grade sqm 300.00
1:12 mm thick
159 0346 Extra veneerede particle board :Teak veneeringononeside & sqm 280.00
commercialon other

Puducherry Page 7
Sl.No. Code No. Description Unit Rate in Rs.

160 0347 Extra for veneered particle board with : Commercial veneering sqm 110.00
on both sides
161 0348 Extra for veneered particle board with: Teak veneering on both sqm 475.00
sides
162 0362 Brick bats cum 450.00

163 0367 Portland cement tonne 6800.00

164 0367A Cement (SRPC) tonne 7300.00

165 0368 White cement tonne 18000.00

166 0370 Coal (steam) quintal 950.00

167 0373 Cramp Gun metal 25x 6x300 mm each 55.00

168 0378 Brass butt hinges (light / ordinarytrype)125x70x4mm 10nos 1250.00

169 0379 Brass butt hinges (light / ordinarytype) 100x70x4mm 10nos 810.00

170 0380 Brass butt hinges (light / ordinarytype) 75x40x2.5mm 10nos 405.00

171 0381 Brass butt hinges (light / ordinarytype)50x40x2.5mm 10nos 240.00

172 0382 Brass butt hinges (heavy type) 125x85x5.5mm (.70kg) 10nos 1950.00

173 0383 Brass butt hinges (heavy type) 100x85x5.5mm (.56kg) 10nos 1765.00

174 0384 Brass butt hinges (heavy type)75x65x4.0mm (.20kg) 10nos 890.00

175 0385 Brass parliamentary hinges 150x125x27x5mm 10nos 2750.00

176 0386 Brass parliamentary hinges 125x125x27x5mm 10nos 2650.00

177 0387 Brass parliamentary hinges 100x125x27x5mm 10nos 2450.00

178 0388 Brass parliamentary hinges 75X100X20X3.2mm 10nos 1950.00

179 0389 Brass single acting spring hinges 150 mm each 280.00

180 0390 Brass single acting spring hinges 125 mm each 245.00

181 0391 Brass single acting spring hinges 100 mm each 180.00

182 0392 Brass double acting spring hinges 150 mm each 455.00

183 0393 Brass double acting spring hinges 125 mm each 295.00

Puducherry Page 8
Sl.No. Code No. Description Unit Rate in Rs.

184 0394 Brass double acting spring hinges 100 mm each 245.00

185 0400 Brass tower bolt (barrel type) 250x10 mm each 290.00

186 0401 Brass tower bolt (barrel type) 200x10 mm each 255.00

187 0402 Brass tower bolt (barrel type) 150x10 mm each 195.00

188 0403 Brass tower bolt (barrel type) 100x10 mm each 145.00

189 0404 Brass flush bolt 250 mm each 170.00

190 0405 Brass flush bolt 150 mm each 130.00

191 0406 Brass flush bolt 100 mm each 90.00

192 0408 Brass handles 125 mm with plate 175x32 mm each 175.00

193 0409 Brass handles 100 mm with plate 150x32 mm each 145.00

194 0410 Brass handles 75 mm with plate 125x32 mm each 100.00

195 0411 Brass door latch 300x16x5 mm (0.380 kg) each 225.00

196 0412 Brass door latch 250x16x5 mm (0.350 kg) each 200.00

197 0413 Brass mortice latch and lock100x65-6leverspair of brasslever each 850.00
handles
198 0414 Brass mortice latch and lock100x65mmpairof brass lever each 730.00
handles
199 0415 65mm Godrej Navtal locks - 6 levers each 360.00

200 0416 65mm Godrej Navtal locks - 7 levers with 3keys each 525.00

201 0417 Brass 150 mm floor door stopper (0.357kg) each 205.00

202 0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 645.00

203 0419 Brass hard drawn hooks and eyes 250 mm 10 Nos 620.00

204 0420 Brass hard drawn hooks and eyes 200 mm 10 Nos 560.00

205 0421 Brass hard drawn hooks and eyes 150 mm 10 Nos 485.00

206 0422 Brass hard drawn hooks and eyes 100 mm 10 Nos 400.00

207 0423 Brass casement window fastener each 55.00

Puducherry Page 9
Sl.No. Code No. Description Unit Rate in Rs.

208 0424 Brass casement stays (straight peg type)300mm weighing not each 120.00
less than 0.33kg
209 0425 Brass casement stays (straight peg type)250mm weighing not each 105.00
less than 0.28kg
210 0426 Brass casement stays (straight peg type)200mm weighing not each 85.00
less than 0.24kg
211 0427 Brass quadrant stays 300 mm each 105.00

212 0428 Brass fanlight catch 10 nos 370.00

213 0429 Brass fan light pivot 10 nos 495.00

214 0430 Brass chain with hook for fan light catch each 38.00

215 0431 Brass hasps and staples (safety type) 300mm 10 Nos 800.00

216 0432 Brass hasps and staples (safety type) 115mm 10 Nos 620.00

217 0433 Brass hasps and staples (safety type) 90 mm 10 Nos 475.00

218 0438 Brass night latch each 800.00

219 0442 Brass helical spring 150 mm each 250.00

220 0444 Brass curtain rod 20mm dia 1.25 mm thick metre 150.00

221 0445 Brass curtain rod 25mm dia 1.25 mm thick metre 200.00

222 0446 Brass brackets (curtain rods ) 20 mm each 48.00

223 0447 Brass cupboard knob or ward robe knob 50 mm each 40.00

224 0449 Brass screws 50 mm 100 Nos 360.00

225 0450 Brass screws 40 mm 100 Nos 275.00

226 0451 Brass screws 30 mm 100 Nos 210.00

227 0452 Brass screws 25 mm 100 Nos 150.00

228 0453 Brass screws 20 mm 100 Nos 105.00

229 0524 Chromium plated brass butt hinges (heavy) type 75x65x4mm 10 Nos 900.00
(200gms)
230 0525 Chromium plated brass butt hinges (light / ordinary) type 10 Nos 950.00
125x70x4mm
231 0526 Chromium plated brass butt hinges (light / ordinary) type 10 Nos 825.00
100x70x4mm

Puducherry Page 10
Sl.No. Code No. Description Unit Rate in Rs.

232 0527 Chromium plated brass butt hinges (light / ordinary) type 10 Nos 400.00
75x40x2.5mm
233 0528 Chromium plated brass butt hinges (light / ordinary) type 10 Nos 325.00
50x40x2.5mm
234 0555 Chromium plated brass handles 125mm with plate 175 x 32 each 230.00
mm
235 0556 Chromium plated brass handles 100mm with plate 150 x 32 each 210.00
mm
236 0557 Chromium plated brass handles 75 mm with plate 125x32 mm each 155.00

237 0558 Chromiumplatedbrassmorticelatch&lock100x65mm each 760.00


with6levers&apair brasslever handle
238 0568 Chromiumplatedbrass casement window fastener each 95.00

239 0569 Chromiumplatedbrasscasementstays(straightpegtype)300mm each 150.00


weighingnotlessthan0.33kg
240 0570 Chromiumplatedbrasscasementstays(straightpegtype)250mm each 135.00
weighingnotlessthan0.28kg
241 0571 Chromiumplatedbrasscasementstays(straightpegtype)200mm each 115.00
weighingnotlessthan0.24kg
242 0583 Chromium plated Brass night latch each 660.00

243 0584 Chromium plated Brass Wardrobe knob 50mm each 45.00

244 0585 Chromium plated Brass screws 50mm 100nos 310.00

245 0586 Chromium plated Brass screws 40mm 100nos 360.00

246 0587 Chromium plated Brass screws 30mm 100nos 205.00

247 0588 Chromium plated Brass screws 25mm 100nos 150.00

248 0589 Chromium plated Brass screws 20mm 100nos 110.00

249 0590 Chromium plated brass curtain rod 12mm dia 1.25mm thick metre 175.00

250 0591 Chromium plated brass curtain rod 20mm dia 1.25mm thick metre 250.00

251 0592 Chromium plated brass curtain rod 25mm dia 1.25mm thick metre 310.00

252 0594 Bright finished or black enameled ms butt hinges 10nos 150.00
125x65x2.12mm
253 0595 Bright finished or black enameled ms butt hinges 10nos 120.00
100x58x1.90mm
254 0596 Bright finished or black enameled ms butt hinges 10nos 80.00
75x47x1.70mmm
255 0597 Bright finished or black enameled ms butt hinges 10nos 63.00
50x37x1.50mmm

Puducherry Page 11
Sl.No. Code No. Description Unit Rate in Rs.

256 0608 Nickel plated ms piano hinges 1mm tk35mm wide metre 30.00

257 0635 Bright finished or black enameled ms screws 50mm 100 Nos 70.00

258 0637 Bright finished or black enameled ms screws 40mm 100Nos 50.00

259 0638 Bright finished or black enameled ms screws 30mm 100 nos 40.00

260 0639 Bright finished or black enameled ms screws 25mm 100 nos 30.00

261 0640 Bright finished or black enameled ms screws 20mm 100 nos 25.00

262 0641 Bright finished or black enameled ms bolts&nuts 50x6mm each 6.60

263 0641R Bright finished orblack enamaled powder coating bolts and each 8.50
nuts 50x6mm
264 0642 Oxidised ms butt hinges 125x65x2.12mm 10nos 235.00

265 0642R powder coating butt hinges125x65x2.12mm 10nos 325.00

266 0643 butt hinges 100x58x1.90mm 10nos 165.00

267 0643R Powder coating butt hinges100x58x1.9mm 10nos 205.00

268 0644 Oxidesed ms butt hinges 75x47x1.70mm 10nos 125.00

269 0645 Oxidesed ms butt hinges 50x37x1.50mm 10nos 90.00

270 0645R powder coating butt hinges 50x37x1.50mm 10nos 100.00

271 0646 Oxidesed ms parliamentary hinges150x125x27x2.8mm 10nos 520.00

272 0646R powder coating parliamentary hinges 150x125x27x2.8mm 10nos 1575.00

273 0647 Oxidesed ms parliamentary hinges125x125x27x2.8mm 10nos 400.00

274 0647R powder coating parliamentary hinges 125x125x27x2.8mm 10nos 1300.00

275 0648 Oxidesed ms parliamentary hinges100x125x27x2.8mm 10nos 385.00

276 0648R powder coating parliamentary hinges 100x125x27x2.8mm 10nos 1050.00

277 0649 Oxidesed ms parliamentary hinges75x100x20x2.24mm 10nos 325.00

278 0649R powder coating parliamentary hinges 75x100x20x2.24mm 10nos 785.00

279 0650 Oxidesed ms single acting spring hinges 150 mm each 95.00

Puducherry Page 12
Sl.No. Code No. Description Unit Rate in Rs.

280 0650R powder coating single spring hinges 150mm each 270.50

281 0651 Oxidesed ms single acting spring hinges 125 mm each 90.00

282 0651R Powder coating ms single spring hinges 125mm each 228.00

283 0652 Oxidesed ms single acting spring hinges 100 mm each 60.00

284 0652R powder coating single acting spring hinges 100mm each 170.00

285 0653 Oxidesed ms double acting spring hinges 150 mm each 100.00

286 0653R powder coating double acting spring hinges 150mm each 260.00

287 0654 Oxidesed ms double acting spring hinges 125 mm each 90.00

288 0654R powder coating double acting spring hinges 125mm each 225.00

289 0655 Oxidesed ms double acting spring hinges 100 mm each 58.00

290 0655R powder coating double acting spring hinges 100mm each 165.00

291 0656 Nickel plated ms piano hinges 1mm tk35mmwide metre 50.00

292 0660 Oxidesed ms sliding door bolt 300x16mm each 78.00

293 0660R powder coating sliding door bolt 300x16 mm each 180.00

294 0661 Oxidesed ms sliding door bolt 250x16mm each 58.00

295 0661R powder coating sliding door bolt 250x16 mm each 155.00

296 0662 Oxidesed ms door latch 300x20x6mm each 42.00

297 0662R powder coating door latch 300x20x6mm each 125.00

298 0663 Oxidesed ms door latch 250x20x6mm each 40.00

299 0663R powder coating latch 250x20x6mm each 110.00

300 0664 Oxidesed mild steel tower bolt (barrel type) 250X10mm each 55.00

301 0664R powder coating tower bolt(barrel type) 250x10 mm each 65.00

302 0665 Oxidesed mild steel tower bolt (barrel type) 200X10mm each 40.00

303 0665R powder coating tower bolt (barrel type) 200x10mm each 52.00

Puducherry Page 13
Sl.No. Code No. Description Unit Rate in Rs.

304 0666 Oxidesed mild steel tower bolt (barrel type) 150X10mm each 30.00

305 0666R powder coating tower bolt (barrel type)150x10mm each 42.00

306 0667 Oxidesed mild steel tower bolt (barrel type) 100X10mm each 25.00

307 0667R powder coating tower bolt (barrel type) 100x10mm each 40.00

308 0668 Oxidesed mild steel handles 125 mm each 32.00

309 0668R powder coating handles 125mm each 95.00

310 0669 Oxidesed mild steel handles 100 mm each 24.00

311 0669R powder coating handles100mm each 70.00

312 0670 Oxidesed mild steel handles 75 mm each 16.00

313 0670R powder coating handles 75mm each 50.00

314 0679 Oxidesed ms hasps and staples (safety type) 150 mm 10 nos 230.00

315 0679R powder coating hasps and staples (safety type) 150mm 10nos 65.00

316 0680 Oxidesed ms hasps and staples (safety type) 115 mm 10 nos 195.00

317 0680R powder coating hasps and staples (safety type)115mm 10nos 55.00

318 0681 Oxidesed ms hasps and staples (safety type) 90 mm 10 nos 170.00

319 0681R powder coating hasps and staples (safety type)90mm 10nos 50.00

320 0682 Oxidesed ms screws 50mm 100nos 80.00

321 0682R powder coating screws 50mm 100nos 155.00

322 0683 screws 40mm 100nos 60.00

323 0683R powder coating screws 40mm 100nos 130.00

324 0684 Oxidesed ms screws 30mm 100nos 45.00

325 0684R powder coating screws 30mm 100nos 90.00

326 0685 Oxidesed ms screws 25mm 100nos 40.00

327 0685R powder coating screws 25mm 100nos 75.00

Puducherry Page 14
Sl.No. Code No. Description Unit Rate in Rs.

328 0686 Oxidesed ms screws 20mm 100nos 30.00

329 0686R powder coating screws 20mm 100nos 60.00

330 0687 Anodised aluminium butt hinges 125x75x4mm 10nos 800.00

331 0688 Anodised aluminium butt hinges 125x63x4mm 10nos 725.00

332 0689 Anodised aluminium butt hinges 100x75x4mm 10nos 675.00

333 0690 Anodised aluminium butt hinges 100x63x3.2mm 10nos 575.00

334 0691 Anodised aluminium butt hinges 100x63x4mm 10nos 675.00

335 0692 Anodised aluminium butt hinges 75x63x4mm 10nos 445.00

336 0693 Anodised aluminium butt hinges 75x63x3.2mm 10nos 375.00

337 0694 Anodised aluminium butt hinges 75x45x3.2mm 10nos 300.00

338 0696 Anodised aluminium sliding door bolt 300x16mm each 250.00

339 0697 Anodised aluminium sliding door bolt 250x16mm each 220.00

340 0698 Anodised aluminium tower bolt (barrel type)300x10mm 10nos 1050.00

341 0699 Anodised aluminium tower bolt (barrel type) 250x10mm 10nos 975.00

342 0700 Anodised aluminium tower bolt (barrel type) 200x10mm 10nos 850.00

343 0701 Anodised aluminium tower bolt (barrel type) 150x10mm 10nos 660.00

344 0702 Anodised aluminium tower bolt (barrel type) 100x10mm 10nos 425.00

345 0703 Anodised aluminium handles125mm with plate 175 x 32mm 10nos 500.00

346 0704 Anodised aluminium handles100mm with plate 150 x 32mm 10nos 425.00

347 0705 Anodised aluminium handles 75mm with plate 125 x 32mm 10nos 375.00

348 0706 Anodised aluminium handles 50 cm long 100x3.15mm each 150.00

349 0713 Block board construction flush door with teak wood plyon both sqm 1850.00
faces 35mm tk
350 0714 Block board construction flush door with teak wood plyon both sqm 1625.00
faces 30mm tk
351 0715 Block board construction flush door with teak wood plyon both sqm 1575.00
faces 30mm tk

Puducherry Page 15
Sl.No. Code No. Description Unit Rate in Rs.

352 0717 Block board construction flush door with commercial plyon both sqm 1425.00
faces 35mm tk
353 0718 Block board construction flush door with commercial plyon both sqm 1360.00
faces 30mm tk
354 0719 Block board construction flush door with commercial plyon both sqm 1250.00
faces 25mm tk
355 0723E P/F 20mm thick PVC shutter for doors, windows , cup board sqm 2100.00
etc
356 0723F P/F PVC false roofing with Sintex PVC Section sqm 800.00

357 0724 S/F Precast RCC door and window frames sqm 870.00

358 0752 Block board construction flush door lipping sqm of door 360.00
area
359 0753 Square vision panel in block board construction flush door sqm of door 120.00
area
360 0754 Circular vision panel in block board construction flush door sqm of door 115.00
area
361 0755 Decorative type louvers in block board construction flush door sqm of door 210.00
area
362 0757 Rebate cutting in block board construction flush door sqm of door 50.00
area
363 0759 Decorative plywood 4 mm sqm 550.00

364 0761 Fuel wood quintal 250.00

365 0763 Glue kg 90.00

366 0768 Cement concrete Jali 50mm tk sqm 415.00

367 0769 Cement concrete Jali 40mm tk sqm 350.00

368 0770 Cement concrete jali 25mm tk sqm 300.00

369 0771 Kerosene oil litre 25.00

370 0773 Unslaked lime quintal 350.00

371 0775 white lime quintal 425.00

372 0776 lime quintal 275.00

373 0777 Dry hydrated lime (factory made) quintal 1050.00

374 0784 Marble dust / powder cum 1800.00

375 0785 Marble chips up to 4mm and downsize white&black quintal 125.00

Puducherry Page 16
Sl.No. Code No. Description Unit Rate in Rs.

376 0788 Marble chips large size above 4mm white&black quital 130.00

377 0810 Moorum cum 450.00

378 0810A Gravel cum 450.00

379 0815 Dry distemper kg 60.00

380 0816 Oil bound washable distemper / Acrylic distemper kg 70.00

381 0818 Linseed oil (double boiled) litre 200.00

382 0820 Cement primer litre 120.00

383 0821 Distemper primer litre 120.00

384 0823 Pink primer (for wood) litre 135.00

385 0826 Aluminium paint litre 250.00

386 0827 Acid proof paint (chocolate or black) litre 300.00

387 0828 Anticorrosive bituminous paint (black) litre 160.00

388 0828A Black board paint litre 180.00

389 0829 Black japan paint litre 105.00

390 0830 Enamel paint litre 190.00

391 0831 Floor enamel paint in all shades except green litre 190.00

392 0833 Synthetic enamel paint in black or chocolate shade litre 190.00

393 0834 Synthetic enamel paint in all shades except black or chocolate litre 190.00
shade
394 0835 Plastic emulsion paint litre 220.00

395 0835A plastic emulsion paint (royal) litre 375.00

396 0835B plastic emulsion paint (premium) litre 270.00

397 0835C plastic emulsion paint (commercial) litre 220.00

398 0840 Paints -Ready mixed for steel work in white litre 190.00

399 0842 Paints -Ready mixed for wood work litre 190.00

Puducherry Page 17
Sl.No. Code No. Description Unit Rate in Rs.

400 0845 Roofing paint for iron sheets in red colour litre 190.00

401 0846 Set release of Don & Rebol emulsion Fosroc - mixed with litre 250.00
5litres of water
402 0850 White lead kg 75.00

403 0851 Water proofing cement paint kg 50.00

404 0855 Wax polish (ready made) kg 350.00

405 0856 Ordinary varnish litre 220.00

406 0857 Superior copal varnish litre 230.00

407 0858 Superior spar varnish litre 250.00

408 0859 Oil type wood preservative litre 120.00

409 0863 Putty for wood work kg 50.00

410 0865 Pig lead kg 275.00

411 0868 Premixed super white gypsum plaster kg 15.00

412 0869 Plaster of paris kg 20.00

413 0869A Ready made wall putty (JK / BIRLA ) kg 28.00

414 0870 plug each 12.00

415 0873 Copper pins 6mm dia 7.5cm long each 12.00

416 0874 Black colour dark shade pigment kg 75.00

417 0875 Red,chocolate,orange,buff or yellow (red oxide of iron) light kg 120.00


shade pigment
418 0876 Green or blue medium shade pigment kg 100.00

419 0886 Standard holder bat clamps for sand cast iron or cast iron each 35.00
pipes 150 mm dia
420 0966 Sand cast iron plain shoe 150mm dia each 200.00

421 0967 Copper plate kg 200.00

422 0969 Pulley 25 mm dia each 20.00

423 0973 Rolling shutter made of 80x1.25mm machine rolled laths sqm 2300.00

Puducherry Page 18
Sl.No. Code No. Description Unit Rate in Rs.

424 0974 Top cover for rolling shutters metre 550.00

425 0975 27.5cm long wire spring grade no 2 for rolling shutters each 500.00

426 0976 Ball bearing for rolling shutters each 260.00

427 0977 Extra for chain & cranked rolling shutters-exceeding sqm 325.00
10sqmupto16.80sqmareaofdoor
428 0978 Extra for chain & cranked rolling shutters-exceeding sqm 375.00
16.80sqmarea of door
429 0979A Quary dust /rubbish cum 500.00

430 0979B Earth for filling (Red earth) cum 400.00

431 0980 cost of sludge cum 30.00

432 0982 Coarse sand (Zone III) cum 1260.00

433 0983 Fine sand (Zone IV) cum 1515.00

434 0992 Galvanised steel plain sheets quintal 5000.00

435 0992A P/F colour coated galvalume sheet of 550 M.P.A sqm 420.00

436 0993C P/S/F of netlon mesh using 25mm an.al.strip sqm 275.00

437 0994 Standard quality hard board sheet 3mm tk sqm 150.00

438 0996 Standard quality hard board sheet 4.5 mm tk sqm 175.00

439 0999 Shellac litre 215.00

440 1000 Spirit litre 30.00

441 1001 Spun yarn kg 42.00

442 1002 MS round bar 12mm dia and below quintal 4500.00

443 1003 MS round bar above 12mm dia quintal 4500.00

444 1004 Av.rate of MS round bar for reinforcements quintal 4500.00

445 1005 Twisted steel / deformed bars quintal 4500.00

446 1005A Steel-TMT (TISCON / VIZAG / IISCO /SAIL / JSW) quintal 5000.00

447 1005B Steel-TMT (ISI BRAND OF APPROVED MAKE) quintal 4300.00

Puducherry Page 19
Sl.No. Code No. Description Unit Rate in Rs.

448 1005C Anticorrosive coating for 20mm to 32mm dia bar tonne 10419.00

449 1005D Anticorrosive coating for 10mm to 16mm dia bar tonne 13896.00

450 1006 Mild steel square bars quintal 4500.00

451 1007 Structural steel such as tees,angles channels and R.S.joists quintal 4300.00

452 1008 Flats upto 10mm in thickness quintal 4500.00

453 1009 Flats exceeding 10mm in thickness quintal 4600.00

454 1010 Mild steel plates quintal 5000.00

455 1013 Mild steel sheets for tanks quintal 4300.00

456 1015 Mild steel expanded metal 20x60 mm strands sqm 275.00

457 1019 Mild steel hooks each 5.75

458 1020 Mild steel rivets quital 4750.00

459 1021 Hard drawn steel wire fabric sqm 350.00

460 1022 GS bolts&nuts6mmdia&25mmlong round head with slots 10nos 11.00

461 1023 GS J or L hooks 8mm dia 10nos 52.00

462 1024 GS bolts&nuts6mmdia&125mmlong round head with slots each 12.00

463 1025 MS bolts 6mm dia and 25mm long with hexagonal head 10nos 15.00

464 1028 Straining bolts each 42.00

465 1029 GS barbed wire quintal 6650.00

466 1030 GS turn buckles each 10.00

467 1031 GS bolts & nuts 10mm dia and 27cm long both sides threaded each 13.00
with 4GS nuts
468 1032 GS bolts 10mm dia & 7cmlongwith nuts each 9.00

469 1034 Bolts and nuts upto 300 mm in length quintal 6050.00

470 1035 Bolts and nuts above 300 mm in length quintal 5350.00

471 1036 Iron pintels including welded pin each 32.00

Puducherry Page 20
Sl.No. Code No. Description Unit Rate in Rs.

472 1037S AISI 316G 50mm S.S.pipe 10mtr or 32.5 or 25kgx400 LS 11000.00

473 1038S 25mm SS pipe 4 cross line 40mtr or 130' or 50kg x400 LS 21500.00

474 1039S Vertical 40mm x10mmx1mtr height 17no.or 55kg x400 LS 23500.00

475 1040S S.S Slant holes over vertical post, each 4 holes , total holes LS 3650.00
68nox50.00
476 1041S S.S.Base plate of 100mmx100x9mm of each 1 kg,17 pipes or LS 5500.00
17kgx300
477 1042S S.S.M9 holes over base plate, total 17 plates , 68 holes x40.00 LS 2720.00

478 1043S S.S. M8 Anchor fastener bolt & 60no x50.00 LS 3400.00

479 1044L For10mtr,charges cutting ,TIG welding, mirror polishing LS 26650.00


inclu.transportationet
480 1143 Steel beading metre 42.00

481 1145 Aluminium plain strip edging 38x12x3mm metre 85.00

482 1149 Glass strip 4mm thick 40mm deep metre 6.50

483 1154 Through and bond stone 100nos 900.00

484 1157 Stone for masonry work cum 800.00

485 1157A Jetty stone / Armour stone / core stone MT 370.00

486 1158 Stone for pitching 15cm x22.5cm cum 1000.00

487 1159 Stone dust cum 500.00

488 1159A Spalls (5 to 50 kg) cum 300.00

489 1159B Charcoal powder kg 27.50

490 1160 Red sand stone block cum 4750.00

491 1161 White sand stone block cum 5350.00

492 1163 White sand stone slab 75mm tk (un-dressed) sqm 345.00

493 1164 Red sand stone slab 40mm thick (un-dressed) sqm 175.00

494 1165 White sand stone slab 40mm thick (un-dressed) sqm 280.00

495 1166 Red sand stone slab 45mm and 50 mm thick (un-dressed) sqm 150.00

Puducherry Page 21
Sl.No. Code No. Description Unit Rate in Rs.

496 1168 Kota stone slab 20mm to 25mm thick(semi-polished) sqm 450.00

497 1169 Kota stone slab 25mm thick (rough chiseled) sqm 510.00

498 1174 Red sand stone slab 45mm and 50mm thick(un-dressed) sqm 225.00

499 1175 White sand stone slab 45mm and 50mm thick(un-dressed) sqm 255.00

500 1177 Stone grit 6mm and down size or pea sized gravel cum 700.00

501 1179 Crushed stone 2.36mm to 12.5mm size cum 685.00

502 1189B Teak wood in scantling (Burma) cum 159050.00

503 1190B Teak wood in planks (Burma) cum 190860.00

504 1197P Country wood in scantling (Padak) cum 84820.00

505 1197V Country wood in scantling (Vengai) cum 77760.00

506 1198P Country wood in planks (Padak) cum 106000.00

507 1198V country wood in planks(Vengai) cum 106000.00

508 1203A Cement concrete flooring tiles 22mm tk - sqm 430.00


(Endura/Ultra/Dazzle/Technic)
509 1207 G.I.limpet washer 100nos 32.00

510 1208 Bitumen washer 100nos 25.00

511 1209 G.I.plain washer thick 100nos 38.00

512 1210 G.I.plain washer thin 100nos 33.00

513 1211 G.I.plain washer for seam bolts 100nos 23.00

514 1213 Water proofing materials kg 33.00

515 1214 Welding by gas plant cm 0.88

516 1215 Welding by electric plant cm 0.68

517 1216 Whiting quintal 680.00

518 1219 Wire nails kg 44.00

519 1220 Wire mesh (rabbit) sqm 70.00

Puducherry Page 22
Sl.No. Code No. Description Unit Rate in Rs.

520 1221 20mm dia holding down bolts quintal 4400.00

521 1222 Mild steel sheets with bolts and nuts to rest on pintels each 210.00

522 1224 Hard drawn steel wire quintal 4750.00

523 1225 Mild steel flat strap fitting quintal 4680.00

524 1234 Aluminium plain strip edging 57x12x3mm metre 132.00

525 1235 Diesel oil litre 54.28

526 1237 Cutting marble or sand stone slab upto 50mm tk by mechanical metre 5.50
device
527 1241 Commercial LPG in cylinder kg 61.00

528 1257C Thermocole plain sheet - 19mm thick sqm 45.00

529 1301 Bleaching powder quintal 3450.00

530 1304 Surface box for stop cock each 82.00

531 1305 Surface box for sluice valve each 165.00

532 1307 Surface box for water meter each 284.00

533 1309 C.I.bracket for washbasin and sinks pair 80.00

534 1314 C.P.brass chain with 32mm dia rubber plug each 210.00

535 1315 C.P.brass chain with 40mm dia rubber plug each 240.00

536 1330 Clamps and M.S.stays including bolts and nuts for 100mm pipe each 27.00

537 1331 M.S.holder bat clamp of approved design for 100mm S.C.I.pipe each 26.00

538 1332 M.S.holder bat clamp of approved design for 75mm S.C.I.pipe each 12.00

539 1334 Clamps and M.S.stays including bolts and nuts for 50mm pipe each 27.00

540 1335 Clamps and M.S.stays including bolts and nuts for 75mm pipe each 27.00

541 1336 Clearing eye with chain and lid 100mm dia each 46.00

542 1337 Clearing eye with chain and lid 150mm dia each 53.00

543 1339 Brass bib -cock 15mm dia each 250.00

Puducherry Page 23
Sl.No. Code No. Description Unit Rate in Rs.

544 1340 Brass bib-cock 20mm dia each 300.00

545 1342 Brass stop-cock 15mm dia each 280.00

546 1343 Brass stop-cock 20mm dia each 340.00

547 1350 Mosquito proof coupling of approved design each 44.00

548 1352 C.I.cover and frame 300x300 mm inside each 350.00

549 1353 C.I.cover without frame 300x300mm inside i/c cover of 4.50kg each 360.00

550 1354 Rectangular cover 455x610mm with frame (low duty) each 1180.00

551 1355 Rectangular cover 455x610mm without frame (low duty) each 510.00

552 1356 500mm dia cover with frame (medium duty) each 1600.00

553 1357 500mm dia cover without frame (medium duty) each 1200.00

554 1358 DI manhole cover- 560mm dia circular hinged cover with each 7400.00
square frame.( Not less
555 1358A DI manhole cover- 560mm dia circular hinged cover with each 8300.00
square frame.( Not less
556 1359 DI Rectangular IC Cover 450x600mm Rectangular Hinged each 6500.00
cover with frame.(Not less
557 1360 C.I.mouth,brass ferrule 15 mm dia each 170.00

558 1361 C.I.mouth,brass ferrule 20 mm dia each 250.00

559 1361A Precast concrete manhole cover- 600mm dia circular cover each 2900.00
with frame.( Not less
560 1362 C.I.mouth,brass ferrule 25 mm dia each 250.00

561 1362A Precast concrete manhole cover- 560mm dia circular cover each 2150.00
with frame.( Not less
562 1363 Vitreous china foot rests 250x130x30 mm pair 110.00

563 1363A Precast concrete rectangular cover 450x600mm Rectangular each 2850.00
cover with frame.(Not
564 1364 C.I grating 100x100 mm each 18.00

565 1364A Precast concrete rectangular cover 450x600mm Rectangular each 1550.00
cover with frame.(Not
566 1365 C.I.grating 150x100mm each 22.00

567 1366 C.I grating 150x150 mm each 29.00

Puducherry Page 24
Sl.No. Code No. Description Unit Rate in Rs.

568 1367 C.I.grating 180x180mm each 32.00

569 1369 S.C.I.gully or nahani grating 100mm dia each 16.00

570 1371 Hydrant (FIRE) 2 Kg each 1690.00

571 1371A Hydrant (FIRE) 4.5 Kg each 2460.00

572 1373 Rubber insertions for 80mm dia pipe joints each 22.00

573 1374 Rubber insertions for 100mm dia pipe joints each 22.00

574 1375 Rubber insertions for 125mm dia pipe joints each 23.00

575 1376 Rubber insertions for 150mm dia pipe joints each 25.00

576 1377 Rubber insertions for 200mm dia pipe joints each 44.00

577 1378 Rubber insertions for 250mm dia pipe joints each 56.00

578 1379 Rubber insertions for 300mm dia pipe joints each 89.00

579 1380 Rubber insertions for 350mm dia pipe joints each 96.00

580 1381 Rubber insertions for 400mm dia pipe joints each 105.00

581 1382 Rubber insertions for 450mm dia pipe joints each 124.00

582 1383 Rubber insertions for 500mm dia pipe joints each 160.00

583 1384 Rubber insertions for 600mm dia pipe joints each 190.00

584 1392 Mirror of superior make glass 60x45cm each 490.00

585 1395 Juteyarn kg 59.00

586 1396 Vitreous china pedestal for wash basin each 1040.00

587 1397 Pig lead kg 275.00

588 1398 "L" Clamp 30 cm long (12mm Dia) no 66.00

589 1399 Hire charge for pipe cutting machine day 250.00

590 1401 G.I Waste Not Tap -15mm(ALTO/GIFVAL) each 98.00

591 1401A G.I Waste Not Tap -20mm(ALTO/GIFVAL) each 160.00

Puducherry Page 25
Sl.No. Code No. Description Unit Rate in Rs.

592 1402 Brass Bib cock-20mm each 124.00

593 1464 S&S.C.I.standard specials upto 300mm dia (heavy class) quintal 4950.00

594 1466 S&S.C.I.standard specials over 300mm dia (heavy class) quintal 5200.00

595 1468 Flanged C.I.standard specials upto 300mm dia (heavy class) quintal 5400.00

596 1470 Flanged C.I.standard specials over 300mm dia (heavy class) quintal 5500.00

597 1472 Casing pipe 100 mm dia metre 490.00

598 1532 Flush pipe with union spreaders and clamps all in C.P.brass for each 290.00
single stall
599 1533 Flush pipe with union spreaders and clamps all in C.P.brass for each 475.00
double stall
600 1534 Flush pipe with union spreaders and clamps all in C.P.brass each 515.00
forrangof threestall
601 1535 Flush pipe with union spreaders and clamps all in C.P.brass each 620.00
forrangof fourstall
602 1540 Flush pipe and spreaders G.I.for single set of one squatting each 320.00
plate urinal
603 1541 Flush pipe and spreaders G.I.for single set of two squatting each 290.00
plate urinal
604 1542 Flush pipe and spreaders G.I.for single set of three squatting each 390.00
plate urinal
605 1543 Flush pipe and spreaders G.I.for single set of four squatting each 415.00
plate urinal
606 1545 G.I.pipes 15mm dia metre 138.00

607 1546 G.I.pipes 20mm dia metre 180.00

608 1547 G.I.pipes 25mm dia metre 239.00

609 1548 G.I.pipes 32mm dia metre 256.00

610 1549 G.I.pipes 40mm dia metre 292.00

611 1550 G.I.pipes 50mm dia metre 475.00

612 1551 G.I.pipes 65mm dia metre 730.00

613 1552 G.I.pipes 80mm dia metre 1080.00

614 1555 G.I.back (jam)nuts 25mm dia each 25.00

615 1559 G.I.back (jam)nuts 65mm dia each 45.00

Puducherry Page 26
Sl.No. Code No. Description Unit Rate in Rs.

616 1608 G.I.tees (equal) 25mm each 55.00

617 1612 G.I.tees (equal) 65mm each 220.00

618 1614 G.I.inlet connection each 58.00

619 1616 S.C.I soil,waste&vent single socketed pipe 1.80 metres each 435.00
long:75mm dia
620 1617 S.C.I soil,waste&vent single socketed pipe 1.80 metres each 475.00
long:100mm dia
621 1617A PVC pipe -110mm dia (4kg / sqm) metre 170.00

622 1618 S.C.I soil,waste&vent single socketed pipe 1.80 metres each 780.00
long:150mm dia
623 1620 S.C.I.plain bend 75mm dia each 85.00

624 1621 S.C.I.plain bend 100mm dia each 115.00

625 1622 S.C.I.plain bend 150mm dia each 300.00

626 1624 S.C.I.bend with access door 75mm dia each 130.00

627 1625 S.C.I.bend with access door 100mm dia each 150.00

628 1625A PVC 110mm plain bend with access door each 92.00

629 1626B Stoneware 150x150mm "Y" joint IS-651 no 285.00

630 1626C Stoneware 200x150mm "Y" joint IS-651 no 350.00

631 1626D Stoneware 250x150mm "Y" joint IS-651 no 400.00

632 1626E Stoneware 300x150mm "Y" joint IS-651 no 620.00

633 1626F Stoneware 375x150mm "Y" joint IS-651 no 1000.00

634 1627 S.C.I.plain single equal junctions 75x75x75 mm dia each 122.00

635 1628 S.C.I.plain single equal junctions 100x100x100 mm dia each 195.00

636 1630 S.C.I.single equal junctions 75x75x75 mm dia with access door each 165.00

637 1631 S.C.I.single equal junctions100x100x100 mm dia with access each 210.00
door
638 1633 S.C.I.plain double equal junctions 75x75x75 x75 mm dia each 195.00

639 1634 S.C.I.plain double equal junctions 100x100x100x100 mm dia each 270.00

Puducherry Page 27
Sl.No. Code No. Description Unit Rate in Rs.

640 1636 S.C.I.plain double equal junctions 75x75x75x75 mm dia with each 225.00
access door
641 1637 S.C.I.plain double equal junctions 100x100x100x100 mm dia each 300.00
with access door
642 1639 Slotted cowl (terminal guard)75mm dia each 90.00

643 1640 Slotted cowl (terminal guard) 100mm dia each 120.00

644 1641 G.I. Union 15mm nominal bore each 65.00

645 1642 G.I. Union 20mm nominal bore each 78.00

646 1643 G.I. Union 25mm nominal bore each 90.00

647 1644 G.I. Union 32mm nominal bore each 126.00

648 1645 G.I. Union 40mm nominal bore each 160.00

649 1646 G.I. Union 50mm nominal bore each 208.00

650 1647 G.I. Union 65mm nominal bore each 276.00

651 1648 G.I. Union 80mm nominal bore each 320.00

652 1649 Polythylene water storage tank with cover and suitable locking per litre 6.20
arrangement
653 1653 Sand cast iron S&S plain single unequal each 180.00
junctions:100x100x75mm dia
654 1656 Sand cast iron S&S single unequal junctions:100x100x75mm each 215.00
diawith access door
655 1659 Sand cast iron S&Splaindouble unequal each 177.00
junctions:100x100x75x75mm dia
656 1662 Sand cast iron S&S double unequal each 250.00
junctions:100x100x75x75mm dia with access door
657 1666 Sand cast iron heel rest bend 75mm dia each 115.00

658 1666A PVC 75mm heel rest bend each 36.80

659 1667 Sand cast iron heel rest bend 100mm dia each 140.00

660 1667A PVC 110mm heel rest bend each 59.80

661 1669 S.C.I.single equal invert branch of required degree each 155.00
75x75x75mm dia
662 1670 S.C.I.single equal invert branch of required degree each 215.00
100x100x100mm dia
663 1672 S.C.I.double equal invert branch of required degree each 200.00
75x75x75x75mm dia

Puducherry Page 28
Sl.No. Code No. Description Unit Rate in Rs.

664 1673 S.C.I.double equal invert branch of required degree each 245.00
100x100x100x100mm dia
665 1674 S.C.I. single unequal invert branch of required degree each 185.00
100x100x75mm dia
666 1677 S.C.I. double unequal invert branch of required degree each 270.00
100x100x75x75 mm dia
667 1682 S.C.I.door pieces 75mm dia each 125.00

668 1683 S.C.I.door pieces 100mm dia each 170.00

669 1685 S.C.I.collar 75mm dia each 60.00

670 1686 S.C.I.collar 100mm dia each 68.00

671 1687 U.P.V.C connection pipe with brass union 30cm long 15mm each 75.00
bore
672 1688 U.P.V.C connection pipe with brass union 30cm long 20mm each 90.00
bore
673 1689 U.P.V.C connection pipe with brass union 45cm long 15mm each 95.00
bore
674 1690 U.P.V.C connection pipe with brass union 45cm long 20mm each 105.00
bore
675 1693 S.C.I.hand pump each 1350.00

676 1700 R.C.C.pipes NP2 class 100mm dia metre 165.00

677 1701 R.C.C.pipes NP2 class 150mm dia metre 185.00

678 1702 R.C.C.pipes NP2 class 250mm dia metre 205.00

679 1703 R.C.C.pipes NP2 class 300mm dia metre 630.00

680 1704 R.C.C.pipes NP2 class 450mm dia metre 880.00

681 1705 R.C.C.pipes NP2 class 500mm dia metre 970.00

682 1706 R.C.C.pipes NP2 class 600mm dia metre 1110.00

683 1707 R.C.C.pipes NP2 class 700mm dia metre 1240.00

684 1709 R.C.C.pipes NP2 class 800mm dia metre 1700.00

685 1710 R.C.C.pipes NP2 class 900mm dia metre 2040.00

686 1711 R.C.C.pipes NP2 class 1000mm dia metre 2690.00

687 1712 R.C.C.pipes NP2 class 1100mm dia metre 3150.00

Puducherry Page 29
Sl.No. Code No. Description Unit Rate in Rs.

688 1713 R.C.C.pipes NP2 class 1200mm dia metre 3740.00

689 1714 R.C.C.collars NP2 class 100mm dia each 60.00

690 1715 R.C.C.collars NP2 class 150mm dia each 120.00

691 1716 R.C.C.collars NP2 class 250mm dia each 160.00

692 1717 R.C.C.collars NP2 class 300mm dia each 240.00

693 1718 R.C.C.collars NP2 class 450mm dia each 300.00

694 1719 R.C.C.collars NP2 class 500mm dia each 330.00

695 1720 R.C.C.collars NP2 class 600mm dia each 390.00

696 1721 R.C.C.collars NP2 class 700mm dia each 440.00

697 1723 R.C.C.collars NP2 class 800mm dia each 480.00

698 1724 R.C.C.collars NP2 class 900mm dia each 515.00

699 1725 R.C.C.collars NP2 class 1000mm dia each 590.00

700 1726 R.C.C.collars NP2 class 1100mm dia each 690.00

701 1727 R.C.C.collars NP2 class 1200mm dia each 740.00

702 1863 Fire clay kitchen sink:600x450x250mm each 1600.00

703 1871 White vitreous china laboratory sink 450x300x150mm each 1250.00

704 1872 White vitreous china laboratory sink 600x450x200mm each 1900.00

705 1875 White plastic seat (solid) with lid C.P.brass hinges and rubber each 360.00
buffers
706 1876 Black plastic seat (solid) with lid C.P.brass hinges and rubber each 350.00
buffers
707 1878 Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia each 700.00

708 1879 Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia each 1050.00

709 1881 Spun yarn kg 42.00

710 1882 Stainer brass 40mm dia 1.5metre long each 550.00

711 1885 15mm C.P.brass tap each 400.00

Puducherry Page 30
Sl.No. Code No. Description Unit Rate in Rs.

712 1889 C.P.brass toilet paper holder of standard size each 110.00

713 1891 C.I.trapfor standard urinal withventarmwith operating&other each 180.00


couplinginCP50mmdia
714 1893 C.I.trapfor standard urinal withventarmwith operating&other each 250.00
couplinginCP80mmdia
715 1895 C.P.brass trap 40mm dia each 210.00

716 1896 100mm S.C.I.trap with vent heel each 180.00

717 1897 100mm S.C.I.trapwith100mminletand 100mm outlet each 200.00

718 1898 100mm S.C.I.trapwith100mminletand 75mm outlet each 200.00

719 1900 S.W.gullytrap P type 100x100mm each 65.00

720 1901 S.W.Gully trap-p type 125 x 100mm each 75.00

721 1902 S.W.gullytrap P type 150x100mm each 85.00

722 1903 S.W.Gully trap-p type 180 x 100mm no 100.00

723 1904 S.W.gullytrap P type 180x100mm each 125.00

724 1913 Vitreous china lipped front urinal each 550.00

725 1915 Vitreous china squatting plate urinal each 1100.00

726 1922 H.P.or L.P.ball valve with polythene floats:15mm dia each 180.00

727 1923 H.P.or L.P.ball valve with polythene floats:20mm dia each 320.00

728 1924 H.P.or L.P.ball valve with polythene floats:25mm dia each 340.00

729 1925 Brass full way valve C.I wheel 15mm dia each 170.00

730 1926 Brass full way valve C.I wheel 20mm dia each 180.00

731 1927 Brass full way valve with C.I.wheel(screwed end) 25mm dia each 320.00

732 1928 Brass full way valve with C.I.wheel(screwed end) 32mm dia each 470.00

733 1929 Brass full way valve with C.I.wheel(screwed end) 40mm dia each 660.00

734 1930 Brass full way valve with C.I.wheel(screwed end) 50mm dia each 900.00

735 1931 Brass full way valve with C.I.wheel(screwed end) 65mm dia each 1250.00

Puducherry Page 31
Sl.No. Code No. Description Unit Rate in Rs.

736 1932 Brass full way valve with C.I.wheel(screwed end) 80mm dia each 1950.00

737 1933 Gunmetal non-return valve -horizontal (screwed end) 25mm each 370.00
dia
738 1934 Gunmetal non-return valve -horizontal (screwed end) 32mm each 510.00
dia
739 1935 Gunmetal non-return valve -horizontal (screwed end) 40mm each 730.00
dia
740 1936 Gunmetal non-return valve -horizontal (screwed end) 50mm each 1070.00
dia
741 1937 Gunmetal non-return valve -horizontal (screwed end) 65mm each 1620.00
dia
742 1938 Gunmetal non-return valve -horizontal (screwed end) 80mm each 2530.00
dia
743 1940 C.I.slucie valve (with caps) class 1:100mm dia each 3200.00

744 1941 C.I.slucie valve (with caps) class 1:125mm dia each 3850.00

745 1942 C.I.slucie valve (with caps) class 1:150mm dia each 4620.00

746 1943 C.I.slucie valve (with caps) class 1:200mm dia each 6600.00

747 1944 C.I.slucie valve (with caps) class 1:250mm dia each 9130.00

748 1945 C.I.slucie valve (with caps) class 1:300mm dia each 11220.00

749 1947 Vitreous china flat back wash basin 630x450mm each 1680.00

750 1949 Vitreous china flat back wash basin 600x480mm each 1700.00

751 1950 Vitreous china flat back wash basin 400x400mm each 880.00

752 1951 C.P.brass waste 32mm each 70.00

753 1952 C.P.brass waste 40mm each 94.00

754 1953 Vitreous china Indian type w.c.pan size 580 mm each 740.00

755 1954 Vitreous china Orrisa type w.c.pan size 580 mm each 900.00

756 1955 Vitreous china pedestal type water closet each 950.00

757 1956 Bolts & nuts 16mm dia 60mm long each 44.00

758 1957 Bolts & nuts 16mm dia 65mm long each 47.00

759 1958 Bolts & nuts 20mm dia 65mm long each 80.00

Puducherry Page 32
Sl.No. Code No. Description Unit Rate in Rs.

760 1959 Bolts & nuts 20mm dia 70mm long each 83.00

761 1960 Bolts & nuts 20mm dia 75mm long each 87.00

762 1961 Bolts & nuts 20mm dia 80mm long each 89.00

763 1962 Bolts & nuts 24mm dia 85mm long each 94.00

764 1963 Bolts & nuts 24mm dia 90mm long each 150.00

765 1964 Bolts & nuts 27mm dia 100mm long each 154.00

766 1965 Whitevitreouschinadualpurposeclosetsuitableforsquattingpanor each 875.60


europeanwatercloset
767 1970 vitreouschinafootrests250x125x25mm pair 85.00

768 1980 Flyash (from Neyveli - 70 km) cum 470.00

769 1984 F.P.S.bricks tile class designation 35 1000 Nos 4000.00

770 1986 Modular bricks class designation 35 1000 Nos 5000.00

771 2391 Strips-Aluminium fluted 3.15mm thick and 150mm wide metre 275.00

772 2392 Strips-Aluminium fluted 3.15mm thick and 200mm widemetre metre 330.00

773 2403 Mango wood in scantling cum 16500.00

774 2404 Mango wood in planks cum 20000.00

775 2406 Flot glass sheet of nominal thickness 4mm (weight not less sqm 340.00
than 10kg/sqm)
776 2407 Flot glass sheet of nominal thickness 5.5mm (weight not less sqm 430.00
than 13.50kg/sqm)
777 2407A Float glass sheet of nominal thickness 6.0mm thick sqm 525.00

778 2408 Float glass panes of 8.0mm thick sqm 575.00

779 2412 Ply wood 5 ply with commercial ply on both faces 6mm thick sqm 260.00

780 2447 Hollock ballies 125mm diameter metre 33.00

781 2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x each 40.00
42 mm
782 2449R powder coating pull bolt lock (locking bolt) of size 85mmx42mm each 53.00

783 2451 Brass cupboard lock 6levers (best make of approved quality) each 70.00
40mm size

Puducherry Page 33
Sl.No. Code No. Description Unit Rate in Rs.

784 2452 Brass cupboard lock 6levers (best make of approved quality) each 87.00
50mm size
785 2453 Brass cupboard lock 6levers (best make of approved quality) each 100.00
65mm size
786 2454 Brass cupboard lock 6levers (best make of approved quality) each 118.00
75mm size
787 2455 Brass hanging type door stopper 150 mm each 70.00

788 2456 Hydraulic door closer bottle type M.S.body with necessary each 1217.00
accessories and screws
789 2459 Anodised aliminium hanging type door stopper each 46.00

790 2464 Anodisedaluminiumpullboltlock(locking bolt) ofsize each 53.00


85mmx42mmwithscrews,bolts,nut
791 2465 Anodisedaluminiumcasementstay250mm each 68.00

792 2467 Chromium plated brass pullboltlock(locking each 200.00


bolt)of85mmx42mmscrews,bolts,nuts&was
793 2468 Nickeled chromium brass cupboard lock 40mm size each 66.00

794 2469 Nickeled chromium brass cupboard lock 50mm size each 84.00

795 2470 Nickeled chromium brass cupboard lock 65mm size each 99.00

796 2471 Nickeled chromium brass cupboard lock 75mm size each 117.00

797 2480 Ply wood 5 ply with teak ply on both faces 9mm thick sqm 762.00

798 2481 Ply wood 5 ply with teak ply on one face & commercial ply on sqm 605.00
another face 9mm tk
799 2483 Ply wood 7 ply with teak ply on one face & commercial ply on sqm 643.50
another face 9mm tk
800 2504 Kiln seasoning of timber cum 593.00

801 2602 F.P.S.bricks class designation 35 (Clay burnt bricks) 1000nos 4200.00

802 2603 F.P.S.bricks class designation 50 1000nos 4200.00

803 2604M Stabilised Mud blocks of size 24cm x 11.5cm x 9cm 1000nos 4000.00

804 2704 Aluminium strip 40mm wide and 2mm thick kg 303.00

805 2710 White marble makrana second quality plain veined stone quintal 110.00
pieces for crazy flooring
806 2711A PVC sheets poly chloride sheat 1.5mm thick sqm 374.00

807 2712A PVC sheets poly chloride sheat 2.0 mm thick sqm 435.00

Puducherry Page 34
Sl.No. Code No. Description Unit Rate in Rs.

808 2717A PVC sheets poly chloride tiles 1.5mm thick sqm 327.00

809 2718A PVC sheets poly chloride tiles 2.0mm thick sqm 350.00

810 2723 Adhesive (rubber base) kg 190.00

811 2736 Rubber sheet 3.2mm thick kg 55.00

812 2736A Rubber sheet 3.2mm thick sqm 220.00

813 2750 8mm tk granite stone tiles (mirror polished of all shades) sqm 600.00

814 2751 8mm tk marble tiles (polished) Raj nagar sqm 370.00

815 2911 Stone chippings / screenings 10/11.2mm nominal size cum 880.00

816 3002 PVC sheet 400 micron tk sqm 99.00

817 3004 Stoneware spouts 100mm dia 60cm long each 50.00

818 3050 GS corrugated sheets quintal 4400.00

819 3080 Gunmetal non-return valve - vertical (screwed end) 25mm dia each 225.00

820 3084 Gunmetal non-return valve - vertical (screwed end) 32mm dia each 325.00

821 3088 Gunmetal non-return valve - vertical (screwed end) 40mm dia each 375.00

822 3092 Gunmetal non-return valve - vertical (screwed end) 50mm dia each 625.00

823 3096 Gunmetal non-return valve - vertical (screwed end) 65mm dia each 825.00

824 3213 Vitreous china surgeon type wash basin of size 660x460mm each 1100.00

825 3228 600x120mmglassshelfanodisedaluminiumangleframe c.p.brass each 92.00


bracket&guardrailof.s.s
826 3229 Vitreouschina flatback wash basin 550x400mm each 700.00

827 3300 Gunmetal non-return valve - vertical (screwed end) 80mm dia each 1225.00

828 3311 C.I.sluice valve (with caps) class II : 100 mm dia each 3000.00

829 3314 C.I.sluice valve (with caps) class II : 125 mm dia each 3600.00

830 3317 C.I.sluice valve (with caps) class II : 150 mm dia each 4300.00

831 3320 C.I.sluice valve (with caps) class II : 200 mm dia each 6100.00

Puducherry Page 35
Sl.No. Code No. Description Unit Rate in Rs.

832 3321 C.I.sluice valve (with caps) class II : 250 mm dia each 8400.00

833 3326 C.I.sluice valve (with caps) class II : 300 mm dia each 10300.00

834 3617 C.P.Brass union 40 mm dia each 92.00

835 3620 C.C.I.(spun) socketed soil,waste & vent pipe 1.80 metres each 978.00
long:100mm dia
836 3621 C.C.I.(spun) socketed soil,waste & vent pipe 1.80 metres each 846.00
long:75mm dia
837 3624 S.C.I. S&S bends with access door 100mm dia each 225.00

838 3625 S.C.I. S&S bends with access door 75mm dia each 179.00

839 3628 S.C.I.S&S bend 100mm dia each 190.00

840 3629 S.C.I.S&S bend 75mm dia each 143.00

841 3634 S.C.I. S&S heel rest sanitary bend 100mm dia each 233.00

842 3635 S.C.I. S&S heel rest sanitary bend 75mm dia each 204.00

843 3640 S.C.I. S&S single equal junctions 100x100x100mm each 367.00

844 3641 S.C.I. S&S single equal junctions 75x75x75mm each 276.00

845 3644 S.C.I. S&S single equal junctions with access door each 396.00
100x100x100 mm
846 3645 S.C.I. S&S single equal junctions with access door each 294.00
75x75x75mm
847 3650 S.C.I. S&S double equal junctions 100x100x100x100mm each 467.00

848 3651 S.C.I. S&S double equal junctions 75x75x75x75mm each 373.00

849 3654 S.C.I. S&S double equal junctions with access door each 502.00
100x100x100 x100mm
850 3655 S.C.I. S&S double equal junctions with access door each 400.00
75x75x75x75mm
851 3660 S.C.I. S&S single unequal junctions 100x100x75 mm each 461.00

852 3664 S.C.I. S&S single unequal junctions with access door each 523.00
100x100x75mm
853 3670 S.C.I. S&S double unequal plain junctions 100x100x75x75 mm each 639.00

854 3674 S.C.I. S&S double unequal junctions with access door each 700.00
100x100x75x75 mm
855 3681 S.C.I. S&S single equal invert branch of required degree each 325.00
100x100x100 mmdia

Puducherry Page 36
Sl.No. Code No. Description Unit Rate in Rs.

856 3682 S.C.I. S&S single equal invert branch of required degree each 247.00
75x75x75 mmdia
857 3685 S.C.I.S&S double equal invert branch of required degree each 414.00
100x100x100x100 mm dia
858 3686 S.C.I.S&S double equal invert branch of required degree each 334.00
75x75x75x75 mm dia
859 3690 S.C.I.S&S single unequal invert branch of required degree each 422.00
100x100x75 mm dia
860 3695 S.C.I.S&S double unequal invert branch of required degree each 574.00
100x100x75x75mm dia
861 3699 S.C.I. S&S,75 mm offset for 75 mm dia pipe each 179.00

862 3707 S.C.I. S&S,150 mm offset for 75 mm dia pipe each 223.00

863 3708 S.C.I. S&S,150 mm offset for 100 mm dia pipe each 306.00

864 3712 S.C.I. S&S,114 mm offset for 75 mm dia pipe each 220.00

865 3713 S.C.I. S&S,114 mm offset for 100 mm dia pipe each 289.00

866 3716 S.C.I. S&S,152 mm offset for 75mm dia pipe each 275.00

867 3717 S.C.I. S&S,152 mm offset for100mm dia pipe each 361.00

868 3728 S.C.I.S&S door pieces 100 mm dia each 230.00

869 3729 S.C.I.S&S door pieces 75mm dia each 176.00

870 3733 S.C.I. S&S,Slotted Cowl (Terminal Guard) 100mm each 154.00

871 3734 S.C.I. S&S,Slotted Cowl (Terminal Guard) 75mm each 142.00

872 3738 S.C.I. S&S,collars 100 mm each 161.00

873 3739 S.C.I. S&S,collars 75 mm each 115.00

874 3746 S.C.I. S&S. 76mm offset for 75mm dia pipe each 126.00

875 3747 S.C.I. S&S. 76mm offset for 100 mm dia pipe each 220.00

876 3749 Vitreous china toilet paper holder of standard size each 149.00

877 3803P Stone ware pipe -375mm dia each 750.00

878 3860 560 mm dia cover with frame (Heavy duty) each 3100.00

879 3861 560 mm dia cover without frame (Heavy duty) each 1730.00

Puducherry Page 37
Sl.No. Code No. Description Unit Rate in Rs.

880 4006 Pressesd steel door frames (MS sheet 1.25mm) profile" B" metre 204.00

881 4007 Pressesd steel door frames (MS sheet 1.25mm) profile" C" metre 220.00

882 4008 Pressesd steel door frames (MS sheet 1.25mm) profile" E" metre 255.00

883 4009 MS tubes hot finished welded type kg 66.00

884 4010 MS tubes hot finished seamless type kg 72.00

885 4011 MS tubes electric resistant or induction butt welded kg 77.00

886 4012 Circular C.I.Box for ceiling fan each 55.00

887 4013 Pulley 40 mm dia each 22.00

888 4014 Readymadesteeldoornecessary sqm 1870.00


hinges,lugs,glazingclipsexcludingotherfittings&fixin
889 4201 Aluminium primer litre 250.00

890 4202 Red oxide zinc chromate primer litre 175.00

891 4203 Copper acetate kg 220.00

892 4204 Hydrochloric acid kg 39.00

893 4204A Concentrated hydrochloric acid litre 110.00

894 4205 Copper chloride kg 215.00

895 4206 Copper nitrate kg 203.00

896 4207 Ammonium chloride kg 12.00

897 6001 White marble slab Makrana second quality plain venied 18mm sqm 1430.00
tk
898 6007 Pink marble slab plain 18mm thick sqm 880.00

899 6010 Udaypur green marble slab plain 18mm tk sqm 638.00

900 6019 Black zebra marble slab plain 18mm tk sqm 456.00

901 647R Powder coating parliamentary hinges 125x125x27x2.8mm 10nos 280.00

902 6501 Sand zone V cum 1260.00

903 7001 Brass 100mm brass locks with 6levers without pair of handles each 660.00

Puducherry Page 38
Sl.No. Code No. Description Unit Rate in Rs.

904 7001A PVC switch lock of 100mm length no 55.00

905 7001B Aluminium handle with lock of 75mm dia no 95.00

906 7003 Pair of anodised aluminium lever handles for 100mm mortice each 245.00
latch & lock
907 7004 Vitreous china flat back washbasin 450x300mm each 715.00

908 7005 Vitreous china 10litres low level cistern without fittings each 5060.00

909 7006 Vitreous china 10litres low level cistern with fittings each 7370.00

910 7008 F.P.S. clay fly ash bricks class designation 1000 Nos 3300.00

911 7009 Gypsum board sqm 187.00

912 7010 Ceiling sections metre 42.00

913 7011 Perimeter channel metre 28.00

914 7012 Intermediate channel metre 44.00

915 7013 Ceiling angle metre 46.00

916 7013A Both side polished cuddapha slab -25mm thick sqm 330.00

917 7014 Connecting clips each 5.50

918 7015 Soffit cleat each 7.70

919 7016 Joint filler kg 24.00

920 7017 Joint finisher (M.S.Grill work) kg 63.00

921 7018 Joint tape roll roll 137.00

922 7019 Dash fastener / Chemical fastener each 13.00

923 7020 All drive screws (for gypsum board) 100nos 57.00

924 7021 Primer (for gypsum board) litre 132.00

925 7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. litre 275.00

926 7023 Chromium plated brackets (curtain rods) each 10.00

927 7024 Acid proof cement tonne 11000.00

Puducherry Page 39
Sl.No. Code No. Description Unit Rate in Rs.

928 7025 Recron 3S - Secondary Reinforcement fibre kg 220.00

929 7027 M.S.Butt hinges 125x90x4mm 10nos 18.00

930 7029 Galvanised wire mesh of av.width of aperture 1.4mm&nominal sqm 192.00
dia of wire 0.63mm
931 7032 Frosted glass sheet of nominal tk 4mm (weighing not less than sqm 385.00
10kg /sqm)
932 7034 Nickel plated M.S.pipe 20mm dia metre 77.00

933 7035 Nickel plated M.S.brackets for curtain rod 20mm each 4.40

934 7036 Nickel plated M.S.brackets for curtain rod 25mm each 5.50

935 7040 Oxidised mild steel screws 35mm 100nos 59.00

936 7040R powder coating screws 35 mm 100 nos 79.00

937 7042 MS conduit pipe (heavy type) ISI marked -20mm dia metre 66.00

938 7043 MS conduit pipe (heavy type) ISI marked -25mm dia metre 72.00

939 7044 Rolling shutters of 80x0.90 mm laths sqm 1980.00

940 7045 Rolling shutters of 80x1.2mm laths sqm 2090.00

941 7046 Top cover of Rolling shutters 0.90mm tk metre 450.00

942 7047 Top cover of Rolling shutters 1.20mm tk metre 480.00

943 7048 Rawl plug 50mm (designation 10 no) each 13.00

944 7049 Teak wood lipping of size 25x3mm in pelmets metre 16.00

945 7055 Flat pressed 3layer & graded particle board (medium sqm 335.00
density)gr.118mmtk -IS -3087
946 7056 Aluminium tee channel (heavyduty)withrollers&stopend metre 50.00

947 7059 Aluminium hanging floor door stopper with twin rubber & each 76.00
stopper
948 7060 Hydraulic door closer tubular type aluminium section body each 850.00

949 7063 Oxidised M.S.casement stay (straight peg type) 300 mm not each 22.00
less than 0.33kg
950 7063R powder coating casement stay (straight peg type) 300mm not each 26.00
less than 0.33kg
951 7064 Oxidised M.S.casement stay (straight peg type) 250 mm not each 17.00
less than 0.28kg

Puducherry Page 40
Sl.No. Code No. Description Unit Rate in Rs.

952 7064R powder coating casement stay (straight peg type)250mm not each 33.00
less than 0.28kg
953 7065 Oxidised M.S.casement stay (straight peg type) 200 mm not each 14.00
less than 0.24kg
954 7065R powder coating casement stay (straight peg type) 200mm not each 46.00
less than 0.24kg
955 7068 Extra for providing grilled rolling shutters with 8mm dia M.S.rod sqm 192.00

956 7070 Chequered PCC tiles 22mm tk using marble chip of size 6mm- sqm 456.00
lightshade,whitecement
957 7071 White marble Raj Nagar Plain 20mm tk(slab sqm 495.00
area0.10sqmto0.20sqm)
958 7077 Acid&alkaliresistant tiles 300x300mm size,10mm tk 10nos 555.00

959 7087 S.C.I.Tee 150 mm each 500.00

960 7090 Expanded polystyrenbe type N-Normal sqm 99.00

961 7091 Expanded polystyrenbe type-SE sqm 144.00

962 7095 Stainless steel kitchen sink- with drain board bowl depth each 4840.00
250mm
963 7096 Stainless steel kitchen sink- with drain board 510x1040mm each 4500.00
bowl depth 225mm
964 7097 Stainless steel kitchen sink- with drain board 510x1040mm each 3950.00
bowl depth 200mm
965 7098 Stainless steel kitchen sink- with drain board 510x1040mm each 2300.00
bowl depth 178mm
966 7101 Stainless steel kitchen sink- without drain board 610x510mm each 1480.00
bowl depth 200mm
967 7102 Stainless steel kitchen sink- without drain board 610x460mm each 1345.00
bowl depth 200mm
968 7103 Stainless steel kitchen sink- without drain board 470x420mm each 1235.00
bowl depth 178mm
969 7104 Coloured Orissa pattern W.C.pan 580x440mm each 1375.00

970 7105 Coloured Pedestal type W.C.pan 580x440mm(European type) each 1430.00

971 7106 Coloured vitreous china 10lit.low level cistern each 7000.00

972 7107 Coloured (other than black) solid P.V.C.seat in European each 495.00
W.C.pan
973 7112 Circular shape 450mm dia mirror with plastic moulded frame each 385.00

974 7113 Rectangular shape 453x357mm mirror with plastic moulded each 410.00
frame
975 7114 Oval shape each 465.00
450x350mm(outerdimensions)mirrorwithplasticmouldedframe

Puducherry Page 41
Sl.No. Code No. Description Unit Rate in Rs.

976 7115 Rectangular shape 1500x450mm mirror with plastic moulded each 990.00
frame
977 7116 Hard board 6mm tk sqm 187.00

978 7117 Semi rigid PVC waste pipe for sink&washbasin 32mm dia each 16.00
lengthnotlessthan 700mm
979 7118 Semi rigid PVC waste pipe for sink&washbasin 40mm dia each 22.00
lengthnotlessthan 700mm
980 7119 Flexiple(coil shaped)PVC each 22.00
wastepipeforsink&washbasin32mmdia&700mmlength
981 7120 Flexiple(coil shaped)PVC each 22.00
wastepipeforsink&washbasin40mmdia&700mmlength
982 7123 Coloured highdensitypolyethylene/polypropylene each 1155.00
10lit(fullflash)controlled low
983 7126 White vittreous china 10lit(full flush)capacity controlled low each 5610.00
level flusing cis
984 7127 Coloured vitrepus china 10 lit.(full flush) capacity controlled low each 7920.00
level flushi
985 7128 S.W.intercepting trap 100mm dia each 165.00

986 7129 S.W.intercepting trap 150mm dia each 231.00

987 7130 Rectangular shape 600x450mm precast RCC manhole cover each 850.00
with frame -L.D.25
988 7131 Square shape 350x350 mm precast RCC manhole cover with each 740.00
frame LD-25
989 7132 Circular shape 450mm dia precast RCC manhole cover with each 690.00
frame LD-25
990 7133 Rectangular shape 500x500 mm precast RCC manhole cover each 900.00
with frame M.D-10
991 7134 Circular shape 500mm dia precast RCC manhole cover with each 900.00
frame M.D.-10
992 7135 Circular shape 560mm dia precast RCC manhole cover with each 1265.00
frame H.D.-20
993 7136 Circular shape 560mm dia precast RCC manhole cover with each 2750.00
frameE.H.D.-35
994 7137 Factory made 35mm tk shutters sqm 1650.00

995 7139 Factory made 35mm tk shutters laminated sqm 1780.00

996 7143 Factory made 30mm tk shutters sqm 1730.00

997 7151 Factory made 30mm tk shutters with laminated sqm 1420.00

998 7154 Factory made 25mm tk shutters with laminated sqm 1460.00

999 7155 Factory made 25mm tk shutters sqm 1265.00

Puducherry Page 42
Sl.No. Code No. Description Unit Rate in Rs.

1000 7157 Laminated veneer lumber confirming cum 600.00

1001 7181 C.I.pile shoe kg 49.00

1002 7182 M.S.clamps for pile shoe kg 46.00

1003 7183 Bentonite tonne 6050.00

1004 7184 Oxidised M.S. safety chain (weighing not less than 450 gms) each 44.00
for door
1005 7184R powder coating safety chain (weighing not less than each 77.00
450gms)for door
1006 7187 C.I.grating 150mm dia (weighing not less than 440 gm) each 20.00

1007 7188 U-PVC pipes (working pressure 4kg / sq.cm) single socketed metre 100.00
75mm dia
1008 7188A U-PVC pipes (working pressure 6kg / sq.cm) single socketed metre 125.00
75mm dia
1009 7189 U-PVC pipes (working pressure 4kg / sq.cm) single socketed metre 190.00
110 mm dia
1010 7189A U-PVC pipes (working pressure 6kg / sq.cm) single socketed metre 205.00
110 mm dia
1011 7190 U-PVC pipes (working pressure 4kg / sq.cm) Rubber(Seal)ring metre 18.50
75mm dia
1012 7190A U-PVC pipes (working pressure 6kg / sq.cm) Rubber(Seal)ring metre 20.00
75mm dia
1013 7191 U-PVC pipes (working pressure 4kg / sq.cm) Rubber(Seal)ring metre 19.50
110mm dia
1014 7191A U-PVC pipes (working pressure 6kg / sq.cm) Rubber(Seal)ring metre 22.00
110mm dia
1015 7192 UPVC coupler for UPVC drainage pipes 75mm each 48.00

1016 7193 UPVC coupler for UPVC drainage pipes 110mm each 70.00

1017 7194 UPVC pushfit coupler (single) 75 mm thick each 48.00

1018 7195 UPVC pushfit coupler (single) 110 mm thick each 88.00

1019 7196 UPVC single equal Tee 75x75x75mm each 77.00

1020 7197 UPVC single equal Tee 110x110x110mm each 148.00

1021 7198 UPVC single equal Tee (with door) 75x75x75mm each 94.00

1022 7199 UPVC single equal Tee (with door) 110x110x110mm each 167.00

1023 7208 UPVC bend 87.5degree 75mm bend each 66.00

Puducherry Page 43
Sl.No. Code No. Description Unit Rate in Rs.

1024 7209 UPVC bend 87.5degree 110mm bend each 105.00

1025 7212 UPVC plain shoe 75mm bend each 132.00

1026 7213 UPVC plain shoe 110mm bend each 242.00

1027 7214 UPVC plain clip 75 mm bend each 15.00

1028 7215 UPVC plain clip 110 mm bend each 38.00

1029 7218 UPVC bend with door 50mm each 105.00

1030 7231 Resin bonded glass wool 16kg/sqm 50mm tk sqm 125.00

1031 7231A P/A MATROOF ACR (FIBRE REINFORCED ACRYLIC sqm 637.00
PLASTER) for roof
1032 7231B P/A MATROOF ACR (FIBRE REINFORCED ACRYLIC sqm 487.00
PLASTER) for parapet wall
1033 7231C Chipping,rackout damaged tile joints & fill with C:M 1:4 Rmt 77.00
admixed cera latex SBR
1034 7231D Laying one layer of CERA WP SHIELD P3180, 3mm thick sqm 603.00

1035 7231E Applying Solar reflective aluminium paint sqm 68.00

1036 7232 Resin bonded glass wool 24kg/sqm 50mm tk sqm 180.00

1037 7233 Fibre glass tissue reinforcement type II grade I sqm 60.00

1038 7236 Precast chequered cement tiles 22mm tk dark shade using sqm 340.00
ordinary cement
1039 7237 Precast chequered cement tiles 22mm tk medium shade using sqm 440.00
ordinary 50%white&50%
1040 7239 Epoxy paint litre 350.00

1041 7240 Fire retardant paint litre 350.00

1042 7241 Melamine polish litre 250.00

1043 7244 Table rubbed polished stone 18mm tk (75x50cm) Agaria sqm 990.00
marble stone 18mm tk
1044 7245 Table rubbed polished stone 18mm tk (75x50cm) Granite stone sqm 1925.00
-18mm tk
1045 7246 Vertical load testing (INITIAL)-IS :2911(Part-IV) -50MT capacity per test 21500.00
pile
1046 7247 Vertical load testing (INITIAL)-IS :2911(Part-IV) -Above 50MT& per test 27500.00
upto 100MT
1047 7248 Vertical load testing (INITIAL)-IS :2911(Part-IV) -Group of two per test 41000.00
or more upto50MT

Puducherry Page 44
Sl.No. Code No. Description Unit Rate in Rs.

1048 7249 Cyclic vertical load testing of piles -IS :2911(Part-IV)-single pile per test 12500.00
upto 50MT
1049 7250 Cyclic vertical load testing of piles-IS:2911(Part-IV)-Single pile per test 19800.00
50MT to 100MT
1050 7251 Cyclic vertical load testing of piles-IS:2911(Part-IV)-Group of per test 25000.00
two piles upto50
1051 7252 Lateral load test-IS:2911 part-IV.Upto 50 tonne per test 12500.00

1052 7253 Latreal load test -IS :2911 part-IV above 50MT per test 19800.00

1053 7254 Hardening compound litre 33.00

1054 7257 C.P.Brass bibcock 15mm each 450.00

1055 7258 C.P.Brass long nose bibcock 15mm each 500.00

1056 7259 C.P.Brass long body bibcock 15mm each 550.00

1057 7260 C.P.Brass stop cock (concealed)15mm each 720.00

1058 7261 C.P.Brass angle valve 15mm each 309.00

1059 7266 Pressed clay tiles 1000 nos 13000.00

1060 7267 Plain ceiling tiles(BWP each 99.00


typephenolformaldehydesyntheticresinbonded)(600x600x12m
1061 7268 m
Semi perforated ceiling tiles (600x600x12mm) each 99.00

1062 7269 25mm tk particle board sqm 660.00

1063 7270 30mm tk prelaminated flush door shutter sqm 2250.00

1064 7271 2nd class teak wood lipping 25mm wide x12mm tk metre 55.00

1065 7272 25mm tk melamine faced prelaminated three layer particle sqm 880.00
board
1066 7295 Granite black marble , 18mm tk slab,above 0.2sqm upto sqm 1540.00
0.5sqm (areawise)
1067 7297 Granite black marble , 18mm tk slab,above 1.0sqm upto sqm 1700.00
2.0sqm (areawise)
1068 7306 Aluminium T or L sections kg 303.00

1069 7306A Aluminium clips kg 443.00

1070 7307 Flushdoorshuttersextra providing teak veneering one side sqm 220.00
insteaadof commercial
1071 7308 Anodised aluminium work for fixed portion kg 632.00

Puducherry Page 45
Sl.No. Code No. Description Unit Rate in Rs.

1072 7309 Anodised aluminium section kg 355.00

1073 7312 Expandable fastener with plastic sleeve & M.S.screws.25mm each 8.80
long
1074 7313 Expandable fastener with plastic sleeve & M.S.screws.32mm each 9.90
long
1075 7314 Expandable fastener with plastic sleeve & M.S.screws.40mm each 11.00
long
1076 7315 Expandable fastener with plastic sleeve & M.S.screws.50mm each 13.00
long
1077 7318 Plasticizer / Super plasticizer kg 180.00

1078 7319 Wall form panel 1250x500mm each 2035.00

1079 7320 Tie bolt 12mm dia 100 mm length each 77.00

1080 7320D Bonding admixture (FOSROC or Equiv.) incl. materials & sqm 165.00
labour
1081 7321 Tie bolt 12mm dia 150 mm length each 80.00

1082 7322 Tie bolt 20mm dia 150 mm length each 150.00

1083 7323 Tie bolt 20mm dia 225 mm length each 190.00

1084 7324 Spring coil 12mm each 24.00

1085 7325 Plastic cone 12mm dia each 31.00

1086 7326 Corner angle 45x45x5mm 1.50m long each 725.00

1087 7327 100mm channel shoulder 2.5m long each 2860.00

1088 7328 Double clip (bridge clip) each 189.00

1089 7329 Single clip each 176.00

1090 7330 M.S.tube 40mm dia metre 308.00

1091 7331 Wall form panel 1250x450mm each 1980.00

1092 7332 Corner angle 45x45x5 m 2.50m long each 1210.00

1093 7333 Column clamp (450-1070mm) each 3190.00

1094 7334 Prop 2m (2-3.5M) each 2420.00

1095 7335 Binding wire kg 60.00

Puducherry Page 46
Sl.No. Code No. Description Unit Rate in Rs.

1096 7338 Gun metal cramp kg 352.00

1097 7339 Stainless steel cramp kg 363.00

1098 7340 Stainless steel pin kg 176.00

1099 7342 Adjustable span ESO+SI(2.35-3.40) each 3630.00

1100 7343 Adjustable telescopic prop 3m (2.02-3.75m) each 2530.00

1101 7344 Beam clamp 300-380 mm (450-1070) each set 960.00

1102 7345 Prop 4m each 2365.00

1103 7346 Double coupler each 91.00

1104 7347 Cadmium plated full threaded steel screws (30x4mm dia ) 100 nos 50.00

1105 7348 Aluminium washer 2mm thick 15mm dia 100 nos 11.00

1106 7349 12mm M.S. 'U' beading metre 7.70

1107 7354 Plastic encapsulated M.S. foot rest 30x20x15cm each 120.00

1108 7355 RCC vent shaft 9.10m long of standard design each 5280.00

1109 7358 Flusing cistern PVC 10lts capacity (low level)(white)with each 913.00
fittings,accessories,
1110 7359 PVC automatic flushing cistern 5 lts capacity each 650.00

1111 7361 PVC automatic flushing cistern 10 lts capacity each 1050.00

1112 7362 CP brass health faucet each 950.00

1113 7363 15mm CP brass tap with elbow operation lever each 1340.00

1114 7364 White glazed fire clay draining board 600x450x25 mm each 605.00

1115 7366 Glass reinforced gypsum (GRG) board 8.5mm tk sqm 230.00

1116 7367 Galvanised MS sheet 0.5mmtk pressed channel section of size metre 64.00
50x32mm
1117 7369 Galvanised MS sheet 0.5mmtk pressed stud.48x34x36mm metre 72.00

1118 7375 G.I.flush pipe&C.P.brassspreader C.P.connecting pipe range each 280.00


of single lipped urinal
1119 7376 G.I.flush pipe&C.P.brassspreader C.P.connecting pipe range each 465.00
two lipped urinal

Puducherry Page 47
Sl.No. Code No. Description Unit Rate in Rs.

1120 7377 G.I.flush pipe&C.P.brassspreader C.P.connecting piperangeof each 550.00


three lipped urinal
1121 7378 G.I.flush pipe&C.P.brassspreader C.P.connecting piperangeof each 850.00
four lipped urinal
1122 7379 White vitreous china clay half stall urinal flat back each 1240.00
580x380x350mmangle back450x
1123 7380 Precast RCC grating with frame 500x450mm horizontal grating each 825.00

1124 7381 Precast RCC grating with frame 450x100mm horizontal grating each 412.00

1125 7385 3mm tk translucent white acrylic plastic sheet sqm 660.00

1126 7386 12 tk particle board ceiling tile sqm 440.00

1127 7388 Dash hold fastener 12.5mm dia,40mm long with 6mm dia bolt each 68.00

1128 7389 Anodising 15 microns on aluminium sections kg 47.00

1129 7390 Neoprene/EPDM rubber gasket metre 33.00

1130 7391 Anodising 25 microns on aluminium sections kg 53.00

1131 7392 Powder coating 50 microns on aluminium sections kg 53.00

1132 7393 Polyester powder coating 50 microns on aluminium sections kg 60.00

1133 7394 Double action hydraulic floor spring with stainless steel cover each 3300.00
plate
1134 7395 6mm dia GI adjustable hangers including clips (up to 1.2m each 66.00
length)
1135 7396 Double action hydraulic floor spring with brass cover plate each 1430.00

1136 7400 15mm PTMT bib cock each 105.00

1137 7401 15mm PTMT bib cock with flange (fancy) each 240.00

1138 7402 15mm PTMT bib cock long body with flange each 170.00

1139 7403 15mm dia PTMT stop cock (male thread) each 105.00

1140 7405 20mm dia .PTMT stop cock each 132.00

1141 7406 PTMT pillar cock each 165.00

1142 7406A CP brass pillar cock - 15mm nominal bore each 495.00

1143 7407 PTMT push cock 15mm dia each 99.00

Puducherry Page 48
Sl.No. Code No. Description Unit Rate in Rs.

1144 7408 PTMT push cock 12mm dia.20mm BSP each 82.00

1145 7409 PTMT grating 100mm dia each 33.00

1146 7411 125mm grating with waste hole each 40.00

1147 7412 Rectangular ty.openable circular lid150mm size18mm each 99.00


high100mm dia (110gm)
1148 7415 Double acting air valve 50mm each 3355.00

1149 7416 Double acting air valve 80mm each 4510.00

1150 7417 Double acting air valve100mm each 5610.00

1151 7418 Water meter (including testing charges) 80mm each 1980.00

1152 7419 Water meter (including testing charges) 100mm each 3850.00

1153 7420 Water meter (including testing charges) 150mm each 5500.00

1154 7421 Water meter (including testing charges) 200mm each 6185.00

1155 7422 Dirt box strainer 80mm each 2640.00

1156 7423 Dirt box strainer 100mm each 3960.00

1157 7424 Dirt box strainer 150mm each 5170.00

1158 7425 Dirt box strainer 200mm each 6996.00

1159 7427 Water stops serrated with central bulb (225mm wide, 8-11 mm metre 355.00
tk)
1160 7428 Water stops Dumb bell with central bulb metre 330.00

1161 7429 Kickers metre 605.00

1162 7430 Wedge expansion hold fastener 1/4" or 6mm each 11.00

1163 7431 Wedge expansion hold fastener 3/8" or 10mm each 13.00

1164 7432 Wedge expansion hold fastener 1/2" or 12mm each 25.00

1165 7435B Vertical load testing - all capacity pile per MT 770.00

1166 7439 8mm tk (mirror polished tiles machine cut edge) Raj nagar sqm 330.00
white
1167 7442 Wheel 75mm dia .40mm wide each 57.00

Puducherry Page 49
Sl.No. Code No. Description Unit Rate in Rs.

1168 7443 Aluminium single cleat of size 30x32x3 each 12.00

1169 7444 Aluminium grip strip of size 50x12x2 each 8.80

1170 7445 25 mm prelaminated flush door both side decorative sqm 1298.00

1171 7449 Aluminium U beading kg 303.00

1172 7451 Glass sheet (Pin headed) 4mm tk sqm 190.00

1173 7452 Raj nagar plain white marble (table rubbed,polished) 18mmtk sqm 990.00
above0.10sqmto0.20
1174 7453 Raj nagar plain white marble (table rubbed,polished) 18mmtk sqm 990.00
above0.2sqmto0.50
1175 7466 Second class deodar tkwood lipping 30mmwidthx12mm metre 22.00

1176 7468 Veneered particle board commercial veneering both sides sqm 440.00
12mm tk
1177 7477 Prelaminated particle board with one side decorative,other side sqm 350.00
balancing lamina
1178 7478 Prelaminated particle board with one side decorative,other side sqm 550.00
balancing lamina
1179 7479 Prelaminated particle board with one side decorative,other side sqm 660.00
balancing lamina
1180 7480 Prelaminated particle board both side decorative sqm 396.00

1181 7485 Oxidised MS hinges finished with nickel plating 50mm (over all metre 42.00
width)
1182 7486 Oxidised MS hinges finished with nickel plating 65mm (over all metre 52.00
width)
1183 7491 PTMT waste coupling 31/32mm each 50.00

1184 7492 PTMT waste coupling 38/40mm each 72.00

1185 7493 PTMT bottle trap 31/32mm each 324.00

1186 7494 PTMT bottle trap 38/40mm each 350.00

1187 7495 PTMT ball cock 15mm complete with Epoxy coated each 133.00
al.road&H.D.ball
1188 7496 PTMT ball cock 20mm complete with Epoxy coated each 192.00
al.road&H.D.ball
1189 7497 PTMT ball cock 25mm complete with Epoxy coated each 435.00
al.road&H.D.ball
1190 7498 PTMT ball cock 40mm complete with Epoxy coated each 820.00
al.road&H.D.ball
1191 7499 PTMT ball cock 50mm complete with Epoxy coated each 1232.00
al.road&H.D.ball

Puducherry Page 50
Sl.No. Code No. Description Unit Rate in Rs.

1192 7500 PTMT angle stopcock with flange 15mm each 132.00

1193 7501 PTMT Swiveling shower 15mm each 89.00

1194 7503 PTMT liquid soap container of 400ml capacity each 148.00

1195 7504 PTMT Towel ring 215x200x37mm each 118.00

1196 7505 PTMT Towel Rail (450mm) each 198.00

1197 7506 PTMT Towel Rail (600mm) each 231.00

1198 7507 PTMT Shell 450x124x36mm each 270.00

1199 7508 PTMT Urinal Spreader 15MM each 132.00

1200 7509 PTMT Soap dish/holder 138x102x75mm each 120.00

1201 7512 PTMT handle 125x34x24mm each 30.00

1202 7513 PTMT handle 150x34x24mm each 33.00

1203 7514 PTMT butt hinges 75x60x10mm each 40.00

1204 7515 PTMT butt hinges 100x75x10mm each 53.00

1205 7516 PTMT tower bolt 152x42x18mm each 66.00

1206 7517 PTMT tower bolt 202x42x18mm each 79.00

1207 7518 PTMT door catcher 72x42mm each 26.00

1208 7550 Surveyor charges hectare 440.00

1209 7551 Surveyor charges metre 5.50

1210 7552 Coir veneeered board 4mm tk sqm 258.00

1211 7552I weighing charges cum 7.70

1212 7553 Coir veneeered board 6mm tk sqm 338.00

1213 7555 Coir veneeered board 12mm tk sqm 602.00

1214 7556 Coir veneeered board 18mm tk sqm 902.00

1215 7559 Testing charge & hire charges of machinery - upto 10 metre 1 job 1265.00

Puducherry Page 51
Sl.No. Code No. Description Unit Rate in Rs.

1216 7560 Testing charge & hire charges of machinery - upto 10 to 20 1 job 1720.00
metre
1217 7561 Testing charge & hire charges of machinery - upto 20 to 30 1 job 2000.00
metre
1218 7562 0.5HP Suguna /Texmo / Sharp monoblock pumpset Each 3300.00

1219 7563 1HP Suguna / Texmo /Sharp monoblock pumpset each 4125.00

1220 7564 2HP Suguna / Texmo /Sharp monoblock pumpset each 11000.00

1221 7565 Fixing in masonry pedestel & earth connections inclding all job 500.00

1222 7651 DI class K-9 pipe conforming to IS 8329 100mm dia Metre 1130.00

1223 7652 DI class K-9 pipe conforming to IS 8329 150mm dia Metre 1686.00

1224 7653 DI class K-9 pipe conforming to IS 8329 200mm dia Metre 2206.00

1225 7654 DI class K-9 pipe conforming to IS 8329 250mm dia Metre 2899.00

1226 7655 DI class K-9 pipe conforming to IS 8329 300mm dia Metre 3672.00

1227 7656 DI class K-9 pipe conforming to IS 8329 350mm dia Metre 4594.00

1228 7657 DI class K-9 pipe conforming to IS 8329 400mm dia Metre 5518.00

1229 7658 DI class K-9 pipe conforming to IS 8329 450mm dia Metre 6309.00

1230 7659 DI class K-9 pipe conforming to IS 8329 500mm dia Metre 7617.00

1231 7660 DI class K-9 pipe conforming to IS 8329 600mm dia Metre 10078.00

1232 7661 DI class K-9 pipe conforming to IS 8329 700mm dia Metre 12858.00

1233 7662 DI class K-9 pipe conforming to IS 8329 750mm dia Metre 14476.00

1234 7663 DI class K-9 pipe conforming to IS 8329 800mm dia Metre 16280.00

1235 7664 DI class K-9 pipe conforming to IS 8329 900mm dia Metre 19592.00

1236 7665 DI class K-9 pipe conforming to IS 8329 1000mm dia Metre 21930.00

1237 7666 Rubber gaskets conforming to IS:5382 of SBR quality 100mm each 30.16
dia
1238 7668 Rubber gaskets conforming to IS:5382 of SBR quality 150mm each 39.50
dia
1239 7669 Rubber gaskets conforming to IS:5382 of SBR quality 200mm each 67.60
dia

Puducherry Page 52
Sl.No. Code No. Description Unit Rate in Rs.

1240 7670 Rubber gaskets conforming to IS:5382 of SBR quality 250mm each 90.48
dia
1241 7671 Rubber gaskets conforming to IS:5382 of SBR quality 300mm each 116.48
dia
1242 7672 Rubber gaskets conforming to IS:5382 of SBR quality 350mm each 142.48
dia
1243 7673 Rubber gaskets conforming to IS:5382 of SBR quality 400mm each 189.28
dia
1244 7674 Rubber gaskets conforming to IS:5382 of SBR quality 450mm each 223.60
dia
1245 7675 Rubber gaskets conforming to IS:5382 of SBR quality 500mm each 270.40
dia
1246 7676 Rubber gaskets conforming to IS:5382 of SBR quality 600mm each 416.00
dia
1247 7677 Rubber gaskets conforming to IS:5382 of SBR quality 700mm each 416.00
dia
1248 7678 Rubber gaskets conforming to IS:5382 of SBR quality 750mm each 520.00
dia
1249 7679 Rubber gaskets conforming to IS:5382 of SBR quality 800mm each 598.00
dia
1250 7680 Rubber gaskets conforming to IS:5382 of SBR quality 900mm each 650.00
dia
1251 7681 Rubber gaskets conforming to IS:5382 of SBR quality1000mm each 832.00
dia
1252 7682 DI K-12 specials suitable push on jointing upto 600mm dia quintal 13000.00

1253 7683 DI K-12 specials suitable push on jointing over 600mm dia quintal 14000.00

1254 7684 DI specials suitable fro mechanical jointing as per IS 9523 upto quintal 13000.00
600mmdia
1255 7685 DI specials suitable fro mechanical jointing as per IS 9523 over quintal 14000.00
600mmdia
1256 7686 DI pipe class K-9 flanges and welding 100mm dia metre 1130.00

1257 7687 DI pipe class K-9 flanges and welding 150mm dia metre 1686.00

1258 7688 DI pipe class K-9 flanges and welding 200mm dia metre 2206.00

1259 7689 DI pipe class K-9 flanges and welding 250mm dia metre 2899.00

1260 7690 DI pipe class K-9 flanges and welding 300mm dia metre 3672.00

1261 7691 DI pipe class K-9 flanges and welding 350mm dia metre 4594.00

1262 7692 DI pipe class K-9 flanges and welding 400mm dia metre 5518.00

1263 7693 DI pipe class K-9 flanges and welding 450mm dia metre 6309.00

Puducherry Page 53
Sl.No. Code No. Description Unit Rate in Rs.

1264 7694 DI pipe class K-9 flanges and welding 500mm dia metre 7617.00

1265 7695 DI pipe class K-9 flanges and welding 600mm dia metre 10078.00

1266 7696 DI pipe class K-9 flanges and welding 700mm dia metre 12858.00

1267 7697 S&S centrifugally(Spun) C.I.Pipe class LA 100mm dia metre 780.00

1268 7698 S&S centrifugally(Spun) C.I.Pipe class LA 125mm dia metre 920.00

1269 7699 S&S centrifugally(Spun) C.I.Pipe class LA 150mm dia metre 1170.00

1270 7700 S&S centrifugally(Spun) C.I.Pipe class LA 200mm dia metre 1550.00

1271 7701 S&S centrifugally(Spun) C.I.Pipe class LA 250mm dia metre 2135.00

1272 7702 S&S centrifugally(Spun) C.I.Pipe class LA 300mm dia metre 5385.00

1273 7703 S&S centrifugally(Spun) C.I.Pipe class LA 350mm dia metre 6787.00

1274 7704 S&S centrifugally(Spun) C.I.Pipe class LA 400mm dia metre 8260.00

1275 7705 S&S centrifugally(Spun) C.I.Pipe class LA 450mm dia metre 9959.00

1276 7706 S&S centrifugally(Spun) C.I.Pipe class LA 500mm dia metre 11724.00

1277 7707 S&S centrifugally(Spun) C.I.Pipe class LA 600mm dia metre 15174.00

1278 7708 S&Scentrifugally(spun)CIpipe specials IS1538suitable lead quintal 6100.00


jointing upto300mmdia
1279 7709 S&Scentrifugally(spun)CIpipe specials IS1538suitable lead quintal 6100.00
jointing over300mmdia
1280 7710 S&Scentrifugally(spun)CIpipe specials IS13382suitable mecha quintal 6100.00
jointingupto300mmdia
1281 7711 S&Scentrifugally(spun)CIpipe specials IS13382suitable mecha quintal 6696.00
jointingover300mmdia
1282 7712 Screweddouble flanged centrifugally cast (SPUN) metre 1172.00
CIpipeofclassBIS1536-100mm dia
1283 7713 Screweddouble flanged centrifugally cast (SPUN) metre 1815.00
CIpipeofclassBIS1536-150mm dia
1284 7714 Screweddouble flanged centrifugally cast (SPUN) metre 2510.00
CIpipeofclassBIS1536-200mm dia
1285 7715 Screweddouble flanged centrifugally cast (SPUN) metre 3360.00
CIpipeofclassBIS1536-250mm dia
1286 7716 Screweddouble flanged centrifugally cast (SPUN) metre 4270.00
CIpipeofclassBIS1536-300mm dia
1287 7717 Screweddouble flanged centrifugally cast (SPUN) metre 5465.00
CIpipeofclassBIS1536-350mm dia

Puducherry Page 54
Sl.No. Code No. Description Unit Rate in Rs.

1288 7718 Screweddouble flanged centrifugally cast (SPUN) metre 7062.00


CIpipeofclassBIS1536-400mm dia
1289 7719 Screweddouble flanged centrifugally cast (SPUN) metre 9150.00
CIpipeofclassBIS1536-450mm dia
1290 7720 Screweddouble flanged centrifugally cast (SPUN) metre 12450.00
CIpipeofclassBIS1536-500mm dia
1291 7721 Screweddouble flanged centrifugally cast (SPUN) metre 15590.00
CIpipeofclassBIS1536-600mm dia
1292 7722 DI class K-7 pipe-IS8329-100mmdia metre 1004.00

1293 7723 DI class K-7 pipe-IS8329-150mmdia metre 1469.00

1294 7724 DI class K-7 pipe-IS8329-200mmdia metre 1898.00

1295 7725 DI class K-7 pipe-IS8329-250mmdia metre 2509.00

1296 7726 DI class K-7 pipe-IS8329-300mmdia metre 3183.00

1297 7727 DI class K-7 pipe-IS8329-350mmdia metre 3995.00

1298 7728 DI class K-7 pipe-IS8329-400mmdia metre 4809.00

1299 7729 DI class K-7 pipe-IS8329-450mmdia metre 5352.00

1300 7730 DI class K-7 pipe-IS8329-500mmdia metre 6622.00

1301 7731 DI class K-7 pipe-IS8329-600mmdia metre 8734.00

1302 7732 DI class K-7 pipe-IS8329-700mmdia metre 11702.00

1303 7733 DI class K-7 pipe-IS8329-800mmdia metre 15653.00

1304 7734 DI class K-7 pipe-IS8329-900mmdia metre 18660.00

1305 7735 DI class K-7 pipe-IS8329-1000mmdia metre 21930.00

1306 7736 Extruded burnt flyash clay sewer bricks - IS 4885-1988 1000nos 4200.00

1307 7737 Fly ash lime bricks (FALG bricks) IS -12894-1989 1000nos 3900.00

1308 7738 Calcium Silicate bricks machine moulded-IS 4139-1989 1000nos 3800.00

1309 7800 Ceramic glazed tiles Ist 5mm tk in all shades except sqm 350.00
burgundy,bottle green,black
1310 7800A Ceramic glazed tiles 200x300mm in all shades sqm 340.00

1311 7800B Ceramic glazed tiles 300x450mm in all shades sqm 400.00

Puducherry Page 55
Sl.No. Code No. Description Unit Rate in Rs.

1312 7800C Ceramic glazed tiles 300x600mm in all shades sqm 550.00

1313 7800D Ceramic glazed tiles 200x300mm in all shades (commercial) sqm 250.00

1314 7800E Ceramic glazed tiles 300x450mm in all shades (commercial) sqm 290.00

1315 7800F Ceramic glazed tiles 300x600mm in all shades (commercial) sqm 430.00

1316 7801 Ceramic glazed tiles Ist 300x300in all shades sqm 370.00
white,ivory,grey,fume red brown et
1317 7801A Ceramic glazed tiles Ist 300x300in all shades sqm 530.00
white,ivory,grey,fume red brown et
1318 7801B Ceramic glazed tiles 300x600in all shades sqm 270.00
white,ivory,grey,fume red brown etc (commercial)
1319 7801C Ceramic glazed tiles 300x300mm white, ivory,grey, fume red sqm 430.00
brown etc (commercial)
1320 7802 Ceramic glazed tiles Ist 300x300inallshadesexce sqm 400.00
white,ivory,grey,fume red brown
1321 7802A Ceramic glazed tiles Ist 300x300inallshadesexce sqm 550.00
white,ivory,grey,fume red brown
1322 7802C Ceramic glazed tiles 300x300mm except white, ivory,grey, sqm 310.00
fume red brown etc (commercial)
1323 7802E Ceramic glazed tiles 300x300mm except white, ivory,grey, sqm 452.00
fume red brown etc (commercial)
1324 7803 Rectified ceramic gl.tiles 300x300ormoreinallshades sqm 500.00
white,ivory,grey,fumeredbrow
1325 7803A Rectified ceramic gl.tiles 300x300 or more in all shades sqm 409.00
(commercial)
1326 7804 Rectified ceramic gl.tiles 300x300ormoreexcept sqm 550.00
white,ivory,grey,fumeredbrow
1327 7804A Rectified ceramic rustic / matt finish 300x300 in all shades sqm 550.00

1328 7804B Rectified ceramic rustic / matt finish 600x600 in all shades sqm 675.00

1329 7804C Rectified ceramic glazed tiles 300x300 or more except white, sqm 430.00
ivory,grey,fume red brown (commercial)
1330 7804D Rectified ceramic rustic / matt finish 300x300 in all shades sqm 430.00
(commercial)
1331 7804E Rectified ceramic rustic / matt finish 600x600 in all shades sqm 560.00
(commercial)
1332 7805 Salem stainless steel AISI -304(18/8) Orrisa pattern WC pan each 3850.00
585mmx480mm
1333 7806 Salem stainless steel AISI -304(18/8) Round basin each 1800.00
405mmX355mm
1334 7807 Salem stainless steel AISI -304(18/8) wash basin each 1650.00
530mmx345mm
1335 7808 Centrifugally cast (spun) iron S&S 100mm inlet & 100mm outlet each 340.00

Puducherry Page 56
Sl.No. Code No. Description Unit Rate in Rs.

1336 7809 Centrifugally cast (spun) iron S&S 100mm inlet & 75mm outlet each 370.00

1337 7850 Agaria white marble slap plain 18mm tk sqm 1320.00

1338 7857 PTMT grating square slit 150mm each 99.00

1339 7858 PTMT Urinal cock 15mm dia each 121.00

1340 7859 PTMT bib cock with nozzle 15mm each 145.00

1341 7861 PTMT stop cock (concealed)15mm each 209.00

1342 7862 15mm nominal bore & 30cm length PVC connection each 35.00
pipewithPTMT nuts
1343 7863 15mm nominal bore & 45cm length PVC connection each 42.00
pipewithPTMT nuts
1344 7864 PTMT extension nipple 15mm each 40.00

1345 7865 PTMT extension nipple 20mm each 47.00

1346 7866 PTMT extension nipple 25mm each 72.00

1347 7900 Modular bricks of class designation 35 1000nos 3300.00

1348 7901 Machine moulded perforated FPS bricks of class designation 1000nos 4950.00
35
1349 7902 Machine moulded modular perforated bricks of class 1000nos 4070.00
designation 35
1350 7903 Machine moulded FPS bricks of class designation 35 1000nos 3850.00

1351 7904 Machine moulded tile bricks of class designation 125 1000nos 3850.00

1352 7954 Hardening compound litre 55.00

1353 8001A 24mmtkfactorymadeshutterswithframe,rails,panelPVCextruded sqm 1650.00


sec.white,greyorwooden
1354 8002 30mmtkfactorymadeshutterswithframe,rails,panel,PVCextruded sqm 2310.00
inwhite,grey,woodenfin
1355 8002A Polyethylene water storage tank-upto 2000 litres (Sintex ISI ) litre 7.20

1356 8003 Factory made PVC rigid foam paneled shutter sqm 1900.00

1357 8003A Polyethylene water storage tank-upto 5000 litres (Sintex ISI ) litre 7.60

1358 8004 Factory made PVC rigid foam paneled shutter as per IS:4020 sqm 2360.00

1359 8004A Polyethylene water storage tank-upto 10000 litres (Sintex ISI ) litre 8.80

Puducherry Page 57
Sl.No. Code No. Description Unit Rate in Rs.

1360 8005A S/F UPVC framed side hung window sqm 7980.00

1361 8005B S/F UPVC framed glazed sliding window sqm 6500.00

1362 8006 Factory made PVC rigid foam sheet 1mm tk sqm 160.00

1363 8007 Factory made PVC rigid foam sheet 5mm tk sqm 613.00

1364 8008 Factory made prelaminated PVC rigid foam sheet 5mm tk sqm 726.00

1365 8009 PVC corner beading of 9.5mm including wastage @5% metre 50.00

1366 8010 48mmx40mmx1.5mm tk factory made door frameof metre 123.00


PVCextrudedsec.in white,grey,wooden
1367 8011 Factory made door frame PVC extruded sheet metre 323.00

1368 8012 Adhesive solvent cement kg 176.00

1369 8013 M.S plate kg 93.00

1370 8100 Powder coated MS butt hinges 100mmx58mmx1.9mm 10nos 143.00

1371 8200 A.P.P.modified polymeric felt (two layers)1.5mm tk sqm 55.00

1372 8201 A.P.P.modified polymeric felt (two layers)2 mm tk sqm 93.50

1373 8203 A..P.P. modified 2 mm tk membrane reingforced with glass sqm 161.70
fibre matt
1374 8204 A..P.P. modified 3 mm tk membrane reingforced with glass sqm 203.50
fibre matt
1375 8205 A..P.P. modified 3 mm tk membrane reingforced with polyester sqm 243.10
matt
1376 8206 Bitumen primer for bitumen membrane litre 45.30

1377 8207 Geotextile 120 gsm membrane sqm 25.00

1378 8210 Stainless steel screws 50mm 100 nos 256.00

1379 8211 Stainless steel screws 40mm 100 nos 189.00

1380 8212 Stainless steel screws 30mm 100 nos 121.00

1381 8214 Stainless steel screws 20mm 100 nos 76.00

1382 8215 Stainless steel butt hinges 125x64x1.9mm IS:12817 marked 10 nos 242.00

1383 8216 Stainless steel butt hinges 100x58x1.9mm IS:12817 marked 10 nos 172.00

Puducherry Page 58
Sl.No. Code No. Description Unit Rate in Rs.

1384 8217 Stainless steel butt hinges 75x47x1.8mm IS:12817 marked 10 nos 146.00

1385 8218 Stainless steel butt hinges 50x37x1.5mm IS:12817 marked 10 nos 108.00

1386 8219 Stainless steel butt hinges(heavy 10nos 315.00


weight)125x64x2.5mmIS:12817marked
1387 8220 SS butt hinges (heavy weight)100x60x2.5mm IS:12817 marked 10nos 223.00

1388 8221 SS butt hinges (heavy weight)75x50x2.5mm IS:12817 marked 10nos 187.00

1389 8222 M.S.heavy weight butt hunges 125x90x4.0mm IS:1341 marked 10nos 315.00

1390 8223 M.S.heavy weight butt hunges 100x75x3.5mm IS:1341 marked 10nos 165.00

1391 8224 M.S.heavy weight butt hunges 75x60x3.5mm IS:1341 marked 10nos 82.00

1392 8225 M.S.heavy weight butt hunges 50x40x2.5mm IS:1341 marked 10nos 63.00

1393 8300 1216mm PE-AL-PE Composite pressure pipe Metre 88.00

1394 8301 1620mm PE-AL-PE Composite pressure pipe Metre 110.00

1395 8302 2025mm PE-AL-PE Composite pressure pipe Metre 143.00

1396 8303 2532mm PE-AL-PE Composite pressure pipe Metre 192.00

1397 8304 3240mm PE-AL-PE Composite pressure pipe Metre 253.00

1398 8305 4050mm PE-AL-PE Composite pressure pipe Metre 335.00

1399 8501 Polymer modified cementation coating Kg 125.00

1400 8502 Fibre glass cloth sqm 38.00

1401 8504 Multi surface paint litre 286.00

1402 8505 Acrylic exterior paint litre 154.00

1403 8506 Premium Acrylic exterior paint litre 264.00

1404 8507 Textured exterior paint litre 215.00

1405 8508 Primer for cement paint litre 130.00

1406 8509 Special Primer (C.W) litre 130.00

1407 8510 Metal primer (U.G.) litre 120.00

Puducherry Page 59
Sl.No. Code No. Description Unit Rate in Rs.

1408 8611 Main T ceiling sections 24x38x0.3mm(3 metre long) each 178.00

1409 8612 Perimeter wall angle 21x21 mm (3 metre long) each 112.00

1410 8613 Intermediate cross channel (1.2 mtrs) each 68.00

1411 8614 Intermediate cross channel (1.6 mtrs) each 32.00

1412 8615 Hanger rod 0.5mm thick each 5.50

1413 8616 Adjustment clip each 4.80

1414 8617 Soffit cleat each 7.70

1415 8618 Dash fastener 6mm dia 50mm long each 13.20

1416 8620 Vitrified floor tile 50x50 cm sqm 592.00

1417 8621 Vitrified floor tile 60x60 cm sqm 645.00

1418 8621A Fully vitrified tiles 60x60cm (Nitco / Rak / Johnson / Asian) sqm 915.00

1419 8621B Soluble salt vitrified tiles 60cmx60cm(Nitco / Somany / Johnson sqm 650.00
/ Asian)
1420 8621C Fully vitrified tiles 60x60cm (Nitco / Rak / Johnson / sqm 565.00
Asian)(commercial)
1421 8621D Soluble salt vitrified tiles 60cmx60cm(Nitco / Somany / Johnson sqm 485.00
/ Asian)(commercial)
1422 8622 Vitrified floor tile 80x80 cm sqm 625.00

1423 8622A Empty HDPE Cement bags no 3.00

1424 8623 Vitrified floor tile100x100cm sqm 1130.00

1425 8623A Fully vitrified tiles100x100cm (Nitco / Rak / Johnson / Asian) sqm 1510.00

1426 8623B Fully vitrified tiles100x100cm (Nitco / Rak / Johnson / sqm 950.00
Asian)(commercial)
1427 8625 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 32.00
16mm Outer dia
1428 8626 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 48.00
20mm Outer dia
1429 8627 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 75.00
25mm Outer dia
1430 8628 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 122.00
32mm Outer dia
1431 8629 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 194.00
40mm Outer dia

Puducherry Page 60
Sl.No. Code No. Description Unit Rate in Rs.

1432 8630 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 280.00
50mm Outer dia
1433 8631 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 440.00
63mm Outer dia
1434 8632 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 630.00
75mm Outer dia
1435 8633 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 7.4- metre 1008.00
90mm Outer dia
1436 8634 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 11- metre 1058.00
110mm Outer dia
1437 8635 Poly propylene -Random - Co-Polymer (PPR) pipes SDR 11- metre 2230.00
160mm Outer dia
1438 8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia metre 61.00

1439 8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia metre 73.00

1440 8637A ASTM pipes - 20 mm dia metre 27.00

1441 8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia metre 97.00

1442 8638A ASTM pipes - 25 mm dia metre 40.00

1443 8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32mm outer dia metre 147.00

1444 8639A ASTM pipes - 32 mm dia metre 53.00

1445 8640 Chlorinated Polyvinyl - chloride (CPVC) pipe 40mm outer dia metre 201.00

1446 8640A ASTM pipes - 40 mm dia metre 71.00

1447 8641 Chlorinated Polyvinyl - chloride (CPVC) pipe 50mm outer dia metre 327.00

1448 8641A ASTM pipes - 50 mm dia metre 121.00

1449 8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia metre 860.00

1450 8642A ASTM pipes - 63 mm dia metre 120.00

1451 8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 75mm inner dia metre 1130.00

1452 8643A ASTM pipes - 75 mm dia metre 180.00

1453 8644 Chlorinated Polyvinyl - chloride (CPVC) pipe 100mm inner dia metre 1570.00

1454 8644A ASTM pipes - 90 mm dia metre 231.00

1455 8645 Chlorinated Polyvinyl - chloride (CPVC) pipe 150mm inner dia metre 2740.00

Puducherry Page 61
Sl.No. Code No. Description Unit Rate in Rs.

1456 8645A ASTM pipes - 110 mm dia metre 330.00

1457 8646 Silicon sealant cartridge 330.00

1458 8647 Stainless steel screws 30mmx4mm cent 33.00

1459 8648 Hermetically sealed sqm 2180.00


doubleglazedunitmade6mmtkclearfloatglassbothside12mmairg
1460 8649 ap
SS (SS 304grade) adjustable friction window stay. 205x19mm each 160.00

1461 8650 SS (SS 304grade) adjustable friction window stay. 255x19mm each 177.00

1462 8651 SS (SS 304grade) adjustable friction window stay. 355x19mm each 229.00

1463 8652 SS (SS 304grade) adjustable friction window stay. 510x19mm each 429.00

1464 8653 SS (SS 304grade) adjustable friction window stay. 710x19mm each 786.00

1465 8654 Masking tape metre 2.20

1466 8655 Autoclaved aerated cement (AAC) blocks cum 1815.00

1467 8656 Gypsum panel 666x500x100mm size sqm 598.00

1468 8657 Bonding plaster for gypsum panel kg 55.00

1469 8658 Mechanised Autoclaved fly ash lime bricks 1000 nos 3850.00

1470 8659 Water proof ply 12mm thick sqm 645.00

1471 8660 Aluminium casement window fastener (anodised AC 15) each 55.00

1472 8661 Aluminium casement window fastener (powder coated ) each 44.00

1473 8662 Aluminium casement window fastener ( polyester powder each 50.00
coated )
1474 8663 Aliuminium round shape handle (anodised AC 15) each 44.00

1475 8664 Aliuminium round shape handle (powder coated) each 46.00

1476 8665 Aluminium round shape handle (polyester powder coated) each 50.00

1477 8666 Stainless steel screws 25mm x 4mm cent 27.50

1478 8667 UV stabilised 2mm tk plain FRP sheet sqm 460.00

1479 8668 UV stabilised 2mm tk corrugated FRP sheet sqm 550.00

Puducherry Page 62
Sl.No. Code No. Description Unit Rate in Rs.

1480 8669 Mangalore ridge tiles 20mm thick each 27.50

1481 8670 Mangalore tiles 18mm thick each 13.00

1482 8671 Precoated galvanised iron profile sheet 0.50mm TCT sqm 357.00

1483 8672 Precoated galvanised steel plain ridges metre 363.00

1484 8673 Precoated galvanised steel flashing /aprons metre 363.00

1485 8674 Precoated galvanised steel gutter metre 396.00

1486 8675 Precoated galvanised steel north light curves metre 396.00

1487 8676 Precoated galvanised steel barge board metre 363.00

1488 8677 Precoated galvanised steel crimp curve sqm 462.00

1489 8678 1mm tk 35mm wide bright finished siainless steel piano hinges metre 82.00

1490 8683 Red sand stone gang saw cut 30mm tk sqm 357.00

1491 8684 White sand stone gang saw cut 30mm tk sqm 396.00

1492 8689 Interlocking C.C.Paver block (60mm tk,M-30) sqm 300.00

1493 8695 Chain link fabric fencing mesh of size 50x50mm made of sqm 297.00
G.I.wire of dia 4mm
1494 8696 Chainlinkfabric fencing mesh 50x50mm made G.I. wire sqm 302.00
dia.4mm, PVC coatedout dia 5
1495 8697 Chainlinkfabric fencing mesh 25x25mm made G.I. wire sqm 412.00
dia.3mm,
1496 8698 SS cramps with nuts,bolts &washer for dry stone cladding each 242.00

1497 8699 8mm tk tapered edge calcium silicate board sqm 220.00

1498 8700 10mm tk calcium silicate board sqm 396.00

1499 8703 Telescopic drawer channels 300mm long set 110.00

1500 8704 SS roller for sliding arrangement in racks/ cupboards / cabinets each 8.80
shutter
1501 8705 50x42x2 tk factory made door framePVCextrudedsections in metre 143.00
white,grey,woodenfinish
1502 8706 25mmtk factory made PVC flush door shutter sqm 2310.00

1503 8707 Factory made glass reinforced plastic door frame 90x45mm metre 385.00

Puducherry Page 63
Sl.No. Code No. Description Unit Rate in Rs.

1504 8708 30mm tk factory made glass fiber reinforced plastic panel door sqm 2090.00
shutter
1505 8710 Factory made solid PVC door frame 60x30mm metre 275.00

1506 8711 28mm factory made solid PVC panel door shutter sqm 2310.00

1507 8713 Fiber glass reinforced plastic chajja sqm 4202.00

1508 8714 Magnetic catcher triple strip vertical type each 22.00

1509 8715 Magnetic catcher douple strip horizontal type each 16.50

1510 8716 100mm mortice lock with 6 levers for aluminium door each 230.00

1511 8717 12.5mm tk glass fibre reinforced gypsum board sqm 176.00

1512 8719 teak wood lipping / moulded beading or Taj beading of size metre 27.50
18x5mm
1513 8720 Ceiling sections 0.55mm tk a knurled web metre 50.00
51.55mm&twoflanges26mmlips10.55mm
1514 8721 Perimeterchannel one flange 20mm&another metre 27.50
flange30mmtk0.55mmweblength27mm
1515 8722 Nylon sleeves & wooden screws (40mm) each 2.20

1516 8723 Counter sunk ribbed head screw 25mm cent 83.00

1517 8724 12mm tk marine plywood conforming to IS:710 sqm 979.00

1518 8725 12mm tk fire retardant plywood conforming to IS:5509 sqm 913.00

1519 8726 1.5mm tk decorative laminated sheet sqm 535.00

1520 8727 1.0mm tk decorative laminated sheet sqm 435.00

1521 8730 30mm tk factory made glass fiber reinforced plastic flush door sqm 2805.00
shutter
1522 8731 High polymer modified quickset tile adhesive kg 16.50

1523 9001 Dry excavation in the shore area cum 78.00

1524 9003 Cost of RCC slotted ring 900mm dia, 300mm ht,40mm tk no 248.00

1525 9004 Cost of RCC ring 900mm dia , 300mm ht,40mm tk no 220.00

1526 9005 Cost of RCC ring with slab 900mm dia , 300mm ht,40mm tk no 440.00

1527 9101 DAKIN mineral fibre of size 600x600mm 1/2"tk sqm 447.00

Puducherry Page 64
Sl.No. Code No. Description Unit Rate in Rs.

1528 9102 Metal grid of hot dipped galvanized steel main T bars no 198.00
24x33mm 3.6Mts at 1.2m c/c
1529 9103 Metal grid of hot dipped galvanizedsteel cross T bars 24x25mm no 63.00
x.27mmtk1.2M
1530 9104 Metal grid of hot dipped galvanizedsteel cross T bars 24x25mm no 35.00
x.27mmtk0.6M
1531 9105 Wall angle of size 24x24x0.27mmtk,length 3m no 124.00

1532 9106 Hanger rods 60cm long with bolts @ 1.2m c/c no 16.50

1533 9107 labour charges for providing Dakin mineral false ceiling with all sqm 297.00
related works
1534 9108 GI frame size 80x26x0.55mmtk with screw metre 164.00

1535 9109 labour charges for providing superior fire rated gypsum board sqm 286.00
scaffolding
1536 9110 600x600mm eboard tiles 6mm tk sqm 242.00

1537 9111 Powder coated GI grid structure of size 24x33x0.27mmtk metre 55.00

1538 9112 labour charges,providing eboard false ceiling suspended on sqm 236.00
GIsectionwith scaffol
1539 9113 Al.composite panel 3mm tk sqm 915.00

1540 9114 Al.sec.of size 38x38mm approx.@0.490 kg/mt. meter 149.00

1541 9115 la.cha.providing wall panelling with al.rollcoated compo.panel sqm 319.00

1542 9201 Conducting test 10m depth from the ground level job 7700.00

1543 9202 Extra for conducting test in additional meter from 10m to 20m meter 935.00
depth
1544 9203 Extra for conducting test in additional meter from 20m to 30m meter 1100.00
depth
1545 9204 Extra for conducting test in additional meter from 30m to 40m meter 1320.00
depth
1546 9205 Conducting chemical analysis of ground water job 2200.00

1547 9206 Conducting chemical analysis of sub soil. job 2200.00

1548 9207 Making trial pits of required size upto max. of 1.5m depth job 5500.00

1549 9208 Collecting disturbed and / or undisturbed soil from the trial pit job 4400.00

1550 9999 Sundries LS 1.75

1551 9999A M30 grade Athees cover block no 2.20

Puducherry Page 65
Sl.No. Code No. Description Unit Rate in Rs.

1552 9999B Incidental charge (8.33) job 8.33

1553 9999C Upto 5KM(82.36) job 82.36

1554 9999G Loading (16) job 16.00

1555 9999H Unloading(16) job 16.00

1556 B001 150mm plain UPVC casing pipe Class 'CM' IS 12818 metre 817.00

1557 B001A UPVC end cap for 150mm dia pipe no 200.00

1558 B002 200mm plain UPVC casing pipe Class 'CM' IS 12818 metre 1485.00

1559 B003 150mm slotted UPVC casing pipe Class RS IS 12818 metre 1023.00

1560 B004 200mm slotted UPVC casing pipe Class RS IS 12818 metre 1767.00

1561 B005 M.S. centering guide 150mm metre 100.00

1562 B006 M.S. centering guide 200mm metre 150.00

1563 B007 M.S. endcap 200mm each 850.00

1564 B008 UPVC cone 150mm each 800.00

1565 B009 UPVC cone 200mm each 1100.00

1566 B011 Pebbles cum 2370.00

1567 B012 Clay ball cum 2000.00

1568 B013 M.S Top cover No 300.00

1569 B014 Making 3mm slots in 150mm dia UPVC casing pipe Rmt 45.00

1570 B015 M.S 8" to 4" saddle set with 4" coupling each 1650.00

1571 B016 Making 3mm slots in 200mm dia UPVC casing pipe Rmt 60.00

1572 E001 19 mm dia PVC conduit metre 7.88

1573 E002 25 mm dia PVC conduit metre 10.45

1574 E003 19 mm dia PVC Bend each 3.30

1575 E004 25 mm dia PVC Bend each 5.00

Puducherry Page 66
Sl.No. Code No. Description Unit Rate in Rs.

1576 E005 19 mm dia PVC junction box each 7.70

1577 E006 25 mm dia PVC junction box each 8.80

Puducherry Page 67
Sl.No. Code No. Description Unit Rate in Rs.

BASIC RATES FOR ROAD WORK

HIRE CHARGES OF PLANTS

1 0300 H/C for Power road roller 8-10 T per hr. 415.00

2 0304 H/C for Hot mix plant 6-10 TPM per hr. 1250.00

3 0305 H/C for Heat master oil fed 1500 lit per hr. 300.00

4 0306 H/C for Tipper 5 T capacity per hr. 350.00

5 0308 H/C for Tractor dozers-275HP(Crowler) per hr. 600.00

6 0309 H/C for Tractor 40-50 HP per hr. 375.00

7 0316 H/C for Motor grader 75-120 HP per hr. 2000.00

8 0317 H/C for Buldozer (above 80 HP) per hr. 2900.00

9 0322 H/C for Front end loader 1cum cap. per hr. 750.00

10 0330 H/C for Mechanical Paver finisher per hr. 1250.00

11 0335 H/C for Concrete mixer 10-7 cft per hr. 200.00

12 0337 H/C for Pin vibrator (needle) per hr. 81.25

13 0359 H/C for steel cribs 6'x2'x2' per hr. 65.00

14 0361 H/C for Shovel per hr. 185.00

15 0362 H/C for Water tanker per hr. 130.00

16 0363 H/C for Vibratory roller per hr. 1600.00

17 0365 H/C for Hot mix plant-40 tonne to 60 tonne per hr. 15000.00

18 0366 H/C for Pnumatic roller per hr. 1300.00

19 0366A H/C for Sensor paver finisher per hr. 3100.00

20 0603 H/C for Truck 10 tonne capacity per hr. 375.00

21 0300A H/C for smooth 3 wheeled steel roller per hr. 450.00

22 0300B H/C for tandem roller per hr. 1100.00

Puducherry Page 68
Sl.No. Code No. Description Unit Rate in Rs.

23 0305 H/C for Heat master oil fed 1500 lit per hr. 300.00

24 0316 H/C for Motor grader 75-120 HP per hr. 2025.00

25 0364 H/C for Base mix plant per hr. 1100.00

26 0306C H/C for disc with harrow per hr. 25.00

27 0306B H/C for blade per hr. 22.00

28 0606 H/C for wet mix plant 75 tonnes per hr. 1150.00

29 0607 H/C for electric generating set 125 KVA per hr. 800.00

30 0608 H/C for rotavator per hr. 18.00

31 0609 H/C for excavator per hr. 1675.00

32 0610 H/C for hydraulic chips spreader per hr. 2175.00

33 0611 H/C for bitumen pressure distributor per hr. 910.00

34 0612 H/C for plate compactor per hr. 75.00

35 0601 H/C for air compressor 250 cfm per hr. 325.00

36 0609A H/C for mechanical broom hydraulic per hr. 325.00

37 0306A H/C for ripper per hr. 32.00

Note: Above hire charge includes cost of services of operating


staff and supply of lubricating oil and fuel

LABOUR

1 0032 Animal cart attendant per day 320.00

2 0034 Bhandani per day 300.00

3 0028 Bhisthi per day 280.00

4 0003 Blacksmith Class I per day 375.00

5 0004 Blacksmith Class II per day 350.00

6 0016 Blaster per day 350.00

7 0018 Breaker per day 350.00

Puducherry Page 69
Sl.No. Code No. Description Unit Rate in Rs.

8 0006 Carpenter Class II per day 450.00

9 0017 Chiseller per day 350.00

10 0019 Dresser per day 350.00

11 0015 Driller per day 350.00

12 0031 Head Mate per day 350.00

13 0024 Hot mazdoor per day 330.00

14 0030 Mali per day 300.00

15 0007 Mason Class I per day 550.00

16 0008 Mason Class II per day 480.00

17 0001 Mate per day 330.00

18 0002 Mazdoor per day 320.00

19 0009 Painter/Varnisher/Polisher Class I per day 450.00

20 0010 Painter/Varnisher/Polisher Class II per day 400.00

21 0033 Ploughing mazdoor per day 310.00

22 0020 Skilled dresser per day 350.00

23 0021 Skilled mazdoor per day 330.00

24 0023 Sprayer per day 350.00

25 0026 Spreader per day 350.00

26 0025 Tarring Mate per day 350.00

27 0011 Blacksmith (Average) per day 362.50

28 0013 Mason (Average) per day 515.00

29 0061 Operatar(pile) per day 420.00

30 0062 Mechanic (pile) per day 400.00

MATERIALS FOR ROAD WORK

Puducherry Page 70
Sl.No. Code No. Description Unit Rate in Rs.

1 0144 Annealed steel wire kg 60.00

2 0106 Bitumen 80/100 tonne 48335.86

3 0106B Bitumen 60/70 tonne 49269.53

4 0106C CRMB tonne 48884.38

5 0106D Bitumen emulsion tonne 45301.44

6 0121 Bricks country 1000No 4200.00

7 0124 Bond stone Cum 950.00

8 0132 Borrow area sand cum 1260.00

9 0141 Ballies 125mm dia metre 53.00

10 0101B Cement (SRPC) tonne 7300.00

11 0101 Cement (PPC) tonne 6800.00

12 0158 De-oiled neem cake qtl 900.00

13 0174 Detonators each 80.00

14 0176 Drilling equipment per day 375.00

15 0212 Digging plant, carriage and planting each 80.00

16 0165 Empty bitumen drum each 100.00

17 0151 Filter media 40mm HBG metal cum 800.00

18 0160 Farm yard manure cum 250.00

19 0164 Fertiliser qtl 850.00

20 0107 Gravel cum 450.00

21 0172 G.I. barbed wire minimum 9.3kg/m qtl 6650.00

22 0161 Hedge plant each 30.00

23 0115 HBG metal 93mm nominal size (IRC) cum 580.00

24 0115B HBG metal 63mm nominal size (IRC) cum 650.00

Puducherry Page 71
Sl.No. Code No. Description Unit Rate in Rs.

25 0117 HBG metal 53mm nominal size (IRC) cum 700.00

26 0118 HBG metal 45mm nominal size (IRC) cum 800.00

27 0114 HBG metal 26.5mm nominal size (IRC) cum 1050.00

28 0113 HBG metal 22.4mm nominal size (IRC) cum 1050.00

29 0112 HBG metal 13.2mm nominal size (IRC) cum 900.00

30 0111 HBG metal 11.2mm nominal size (IRC) cum 900.00

31 0400 HBG metal 10mm nominal size cum 900.00

32 0119 HBG metal 6.75mm nominal size (IRC) cum 650.00

33 0133 HBG metal 5.75mm nominal size (IRC) cum 650.00

34 0152 Joint sealing compound 25mm deep kg 125.00

35 0153 Joint filler 10cm wide 12.5cm deep sqcm 115.00

36 0102 Mild steel bars tonne 45000.00

37 0123 Mango wood planks cum 20000.00

38 0166 M.S. rivets 6mm X 10mm each 55.00

39 0167 M.S flats qtl 4550.00

40 0171 M.S angle, tee, channel, flat (avearge) qtl 4300.00

41 0154 Premixed primer litre 135.00

42 0155 Premixed paint I class litre 190.00

43 0162 Plants each 15.00

44 0125 Rough stone for RR work cum 800.00

45 0145 RCC pipe NP3 with collar 1200mm dia metre 6300.00

46 0147 RCC pipe NP3 with collar 900mm dia metre 4750.00

47 0156 Road marking paint litre 325.00

48 0100 Sand cum 1260.00

Puducherry Page 72
Sl.No. Code No. Description Unit Rate in Rs.

49 0157 Screened manure cum 90.00

50 0159 Sludge cum 30.00

51 0163 Shrubs each 15.00

52 0173 Special gelatine 80% kg 60.00

53 0175 Safety fuse wire coil 40.00

54 0150 Spall cum 325.00

55 0103 Tor steel bars tonne 45000.00

56 0103A TMT -Rods(TISCON/VIZAG/IISCO/SAIL /JSW) tonne 50000.00

57 0103B Steei TMT -Rods (ISI brand approved make) tonne 43000.00

58 0126 Bajri (20mm Nominal size) cum 500.00

59 0127 Gravel (22.4mm - 90mm) cum 450.00

60 0128 Gravel (5.6mm - 22.4mm) cum 450.00

61 0130 WBM Grade-II metal (63mm - 45mm) cum 716.67

62 0131 WBM Grade-III metal (53mm - 22.4mm) cum 900.00

63 0135 IRC HBG Metal (26.5mm - 11.2mm) cum 975.00

64 0136 IRC HBG Metal (22.4mm - 2.8mm) cum 800.00

65 0137 IRC HBG Metal (11.2mm - 2.8mm) cum 683.33

66 0138 IRC HBG Metal 2.8mm cum 500.00

67 0139 IRC HBG Metal (53mm - 26.5mm) cum 850.00

68 0140 IRC HBG Metal (22.4mm - 11.2mm) cum 950.00

69 0109 ISS HBG Metal 20mm cum 1050.00

70 0110 ISS HBG Metal 40mm cum 800.00

71 0129 WBM Grade-I metal (90mm - 45mm) cum 682.50

72 0382 Enamel paint litre 190.00

Puducherry Page 73
Sl.No. Code No. Description Unit Rate in Rs.

73 0383 Road Reflector each 500.00

74 0384 Stone 15x15x19cm with 30cm chisel dressed each 65.00

75 0401 Bentonite tonne 6050.00

76 0402 Diesel litre 54.28

77 0403 Linseed oil litre 200.00

78 0383A S/F TATA BP Solar powered studs uni directonal each 4000.00

79 0125A 10mm thick Flamed granite sqm 660.00

80 0710 Hot applied thermoplastic compound lit 200.00

Puducherry Page 74
Sl.No. Code No. Description Unit Rate in Rs.

BASIC RATES FOR BRIDGE WORK

1 0001 Mate each 330.00

2 0002 Mazdoor each 320.00

3 0003 Blacksmith I class each 375.00

4 0004 Blacksmith II class each 350.00

5 0007 Mason I class each 550.00

6 0008 Mason II class each 480.00

7 0009 Painter I class each 450.00

8 0011 Blacksmith (average) each 362.50

9 0013 Mason (average) each 515.00

10 0015 Driller each 350.00

11 0016 Blaster each 350.00

12 0017 Chiseller each 350.00

13 0028 Bhisthi each 280.00

14 0037 Fitter (average) each 475.00

15 0040 Welder (average) each 425.00

16 0042 Well sinker I class each 500.00

17 0044 Well sinker (average) each 475.00

18 0047 Mechanic (average) each 425.00

19 0053A Work supervisor each 350.00

20 0055 Operator each 360.00

21 0057 Skilled labour each 275.00

22 0058 Semi skilled labour each 275.00

23 0100 Sand cum 1260.00

Puducherry Page 75
Sl.No. Code No. Description Unit Rate in Rs.

24 0101 Cement (PPC) tonne 6800.00

25 0101B Cement(SRPC) tonne 7300.00

26 0102 Mild steel tonne 45000.00

27 0103 Tor steel tonne 45000.00

28 0103A TMT - Rods(TISCON/VIZAG/IISCO/SAIL /JSW) tonne 50000.00

29 0103B Steel TMT -Rods (ISI brand approved make) tonne 43000.00

30 0106 Bitumen 80/100 tonne 48335.86

31 0107 Gravel cum 450.00

32 0108 ISS HBG metal-10mm cum 900.00

33 0109 ISS HBG metal-20mm cum 1050.00

34 0110 ISS HBG metal-40mm cum 800.00

35 0120 Bricks 1000 no 4200.00

36 0124 Bond stone cum 950.00

37 0125 Rough stone for rr work cum 800.00

38 0144 Annealed steel wire kg 60.00

39 0150 Spall cum 325.00

40 0151 Filter media stone aggregate 40mm HBG metal cum 800.00

41 0156 Road marking paint litre 325.00

42 0171 M.S angle,tee,channel,flat (average) tonne 43000.00

43 0174 Detonators each 80.00

44 0175 Safety fuse wire coil 40.00

45 0176 Drilling equipment day 375.00

46 0177 A.c collar 100mm dia each 25.00

47 0178 Blasting materials kg 30.00

Puducherry Page 76
Sl.No. Code No. Description Unit Rate in Rs.

48 0179 M.S bolts & nuts kg 93.00

49 0181 Drill bits each 180.00

50 0183 Diesel litre 54.28

51 0184 Oil litre 200.00

52 0185 C.I shoes @ 80kg/pile kg 47.00

53 0186 M.S shoes @ 35kg/pile kg 52.00

54 0193 Neoprene kg 270.00

55 0194 M.S plate kg 93.00

56 0196 A.c pipe 100mm dia metre 38.00

57 0197 M.S holder bat clamp 100mm dia each 17.00

58 0198 Copper plate kg 220.00

59 0199 Fibre board sqm 220.00

60 0200 Premoulded joint filler 20mm th.12m x 0.25m sqm 32.00

61 0207 Chequered c.c tiles sqm 430.00

62 0208 M.S grating 260mm x 26mm each 38.00

63 0209 G.I pipe 100mm class b metre 1150.00

64 0210 G.I wire mesh 10cm x 10cm size 3mm thick kg 64.00

65 0211 Epoxy kg 350.00

66 0221 Pigment kg 75.00

67 0222 Nipple kg 30.00

68 0331 H/c for crane 3 mt Hr. 438.00

69 0335 H/c for concrete mixer 10-7 cft Hr. 200.00

70 0337 H/c for pin vibrator (needle) Hr. 81.25

71 0341 H/c for pumpset 10-20 hp Hr. 110.00

Puducherry Page 77
Sl.No. Code No. Description Unit Rate in Rs.

72 0352 H/c for screed vibrator Hr. 62.50

73 0355 H/c for air compressor 145-170 cfm Hr. 265.00

74 0357 H/c for air compressor 300-340 cfm Hr. 345.00

75 0377 H/c for batching plant Hr. 1900.00

76 0378 H/c for transit mixer Hr. 1200.00

Puducherry Page 78
Sl.No. Code No. Description Unit Rate in Rs.

BASIC RATES FOR PUBLIC HEALTH ITEMS


Chappter No.31, 32, 33
1 10A UNLOADING-100mm dia metre 0.63

2 10B UNLOADING-125mm dia metre 0.84

3 10C UNLOADING-150mm dia metre 1.05

4 10D UNLOADING-200mm dia metre 1.70

5 10E UNLOADING-250mm dia metre 2.42

6 10F UNLOADING-300mm dia metre 2.99

7 10G UNLOADING-350mm dia metre 3.54

8 10H UNLOADING-400mm dia metre 5.71

9 10I UNLOADING-450 to 500mm dia metre 6.98

10 10J UNLOADING-600 to 1000mm dia metre 10.47

11 10K unloading below 100mm dia metre 0.53

12 1372A 65mm dia (Rubber insertion for flanged pippe joints) each 25.00

13 1372B 80mm dia (Rubber insertion for flanged pippe joints) each 28.00

14 1372C 100mm dia (Rubber insertion for flanged pippe joints) each 32.00

15 1372D 125mm dia (Rubber insertion for flanged pippe joints) each 51.00

16 1372E 150mm dia (Rubber insertion for flanged pippe joints) each 58.00

17 1372F 200mm dia (Rubber insertion for flanged pippe joints) each 85.00

18 1372G 250mm dia (Rubber insertion for flanged pippe joints) each 165.00

19 1372H 300mm dia (Rubber insertion for flanged pippe joints) each 190.00

20 1372I 350mm dia (Rubber insertion for flanged pippe joints) each 325.00

21 1372J 400mm dia (Rubber insertion for flanged pippe joints) each 370.00

22 1372K 450mm dia(Rubber insertion for flanged pippe joints) each 550.00

23 1372L 500mm dia (Rubber insertion for flanged pippe joints) each 700.00

Puducherry Page 79
Sl.No. Code No. Description Unit Rate in Rs.

24 1372M 600mm dia (Rubber insertion for flanged pippe joints) each 840.00

25 1372N 700mm dia (Rubber insertion for flanged pippe joints) each 1043.00

26 1372O 750mm dia (Rubber insertion for flanged pippe joints) each 2250.00

27 1372P 800mm dia (Rubber insertion for flanged pippe joints) each 2541.00

28 1372Q 900mm dia (Rubber insertion for flanged pippe joints) each 2831.00

29 1372R 1000mm dia (Rubber insertion for flanged pippe joints) each 3696.00

30 1373A 80mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS- each 40.00
5382&12820&ISI mark)
31 1373B 100mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 45.00
IS-5382&12820&ISI mark)
32 1373C 150mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 60.00
IS-5382&12820&ISI mark)
33 1373D 200mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 90.00
IS-5382&12820&ISI mark)
34 1373E 250mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 120.00
IS-5382&12820&ISI mark)
35 1373F 300mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 150.00
IS-5382&12820&ISI mark)
36 1373G 350mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 185.00
IS-5382&12820&ISI mark)
37 1373H 400mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 246.00
IS-5382&12820&ISI mark)
38 1373I 450mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 291.00
IS-5382&12820&ISI mark)
39 1373J 500mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 352.00
IS-5382&12820&ISI mark)
40 1373K 600mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 440.00
IS-5382&12820&ISI mark)
41 1373L 700mm Dia( Rubber gasket styrene Butadiene Rubber(SBR) each 541.00
IS-5382&12820&ISI mark)
42 1373M 750mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 676.00
IS-5382&12820&ISI mark)
43 1373N 800mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 777.00
IS-5382&12820&ISI mark)
44 1373O 900mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 845.00
IS-5382&12820&ISI mark)
45 1373P 1000mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) each 1081.00
IS-5382&12820&ISI mark)
46 1374A 80mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 45.00
mark
47 1374B 100mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 55.00
mark

Puducherry Page 80
Sl.No. Code No. Description Unit Rate in Rs.

48 1374C 150mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 72.00
mark
49 1374D 200mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 109.00
mark
50 1374E 250mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 152.00
mark
51 1374F 300mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 203.00
mark
52 1374G 350mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 230.00
mark
53 1374H 400mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 320.00
mark
54 1374I 450mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 352.00
mark
55 1374J 500mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 440.00
mark
56 1374K 600mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 609.00
mark
57 1374L 700mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 906.00
mark
58 1374M 750mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 1048.00
mark
59 1374N 800mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 1147.00
mark
60 1374O 900mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 1257.00
mark
61 1374P 1000mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI each 1644.00
mark
62 1545P 15mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 182.00
APOLLO, ZENITH
63 1546P 20mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 230.00
APOLLO, ZENITH
64 1547P 25mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 318.00
APOLLO, ZENITH
65 1548P 32mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 322.00
APOLLO, ZENITH
66 1549P 40mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 400.00
APOLLO, ZENITH
67 1550P 50mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 500.00
APOLLO, ZENITH
68 1551P 65mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 729.00
APOLLO, ZENITH
69 1552P 80mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, metre 955.00
APOLLO, ZENITH
70 1555A water meter standard quality (Ataris) each 1200.00

71 1559A 25 mm X 20 mm dia -GI reducer - IS-1239 part 2 each 40.00


(UNIQUE/RBRAND/HPBRAND/UI BRAND)

Puducherry Page 81
Sl.No. Code No. Description Unit Rate in Rs.

72 1559AA 150 mm x 80 mm dia-GI reducer - IS-1239 part 2 each 2120.00


(UNIQUE/RBRAND/HPBRAND/UI BRAND)
73 1559AB 150 mm x 100 mm dia-GI reducer - IS-1239 part 2 each 2124.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
74 1559AC 150 mm x 125 mm dia-GI reducer - IS-1239 part 2 each 2124.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
75 1559B 32 mm x 20 mm dia -GI reducer - IS-1239 part 2 each 57.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
76 1559C 32 mm x 25 mm dia -GI reducer - IS-1239 part 2 each 60.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
77 1559D 40 mm x 20 mm dia -GI reducer - IS-1239 part 2 each 70.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
78 1559D1 40 mm x 25 mm dia -GI reducer - IS-1239 part 2 each 75.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
79 1559E 40 mm x 32 mm dia -GI reducer - IS-1239 part 2 each 75.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
80 1559F 50 mm x 20 mm dia -GI reducer - IS-1239 part 2 each 100.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
81 1559F1 50 mm x 25 mm dia -GI reducer - IS-1239 part 2 each 102.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
82 1559G 50 mm x 32 mm dia -GI reducer - IS-1239 part 2 each 105.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
83 1559H 50 mm x 40 mm dia -GI reducer - IS-1239 part 2 each 105.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
84 1559I 65 mm x 20 mm dia -GI reducer - IS-1239 part 2 each 180.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
85 1559I1 65 mm x 25 mm dia -GI reducer - IS-1239 part 2 each 180.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
86 1559J 65 mm x 32 mm dia -GI reducer - IS-1239 part 2 each 180.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
87 1559K 65 mm x 40 mm dia-GI reducer - IS-1239 part 2 each 180.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
88 1559L 65 mm x 50 mm dia -GI reducer - IS-1239 part 2 each 180.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
89 1559M 80 mm x 32 mm dia-GI reducer - IS-1239 part 2 each 265.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
90 1559N 80 mm x 40 mm dia -GI reducer - IS-1239 part 2 each 265.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
91 1559O 80 mm x 50 mm dia -GI reducer - IS-1239 part 2 each 265.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
92 1559P 80 mm x 65 mm dia -GI reducer - IS-1239 part 2 each 266.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
93 1559Q 100 mm x 40 mm dia -GI reducer - IS-1239 part 2 each 405.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
94 1559R 100 mm x 50 mm dia-GI reducer - IS-1239 part 2 each 405.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
95 1559S 100 mm x 65 mm dia -GI reducer - IS-1239 part 2 each 405.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)

Puducherry Page 82
Sl.No. Code No. Description Unit Rate in Rs.

96 1559T 100 mm x 80 mm dia -GI reducer - IS-1239 part 2 each 410.00


(UNIQUE/RBRAND/HPBRAND/UI BRAND)
97 1559U 125 mm x 50 mm dia -GI reducer - IS-1239 part 2 each 1550.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
98 1559V 125 mm x 65 mm dia -GI reducer - IS-1239 part 2 each 1550.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
99 1559W 125 mm x 80 mm dia -GI reducer - IS-1239 part 2 each 1570.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
100 1559X 125 mm x 100 mm dia-GI reducer - IS-1239 part 2 each 1570.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
101 1559Y 150 mm x 50 mm dia -GI reducer - IS-1239 part 2 each 2115.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
102 1559Z 150 mm x 65 mm dia -GI reducer - IS-1239 part 2 each 2115.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
103 1560 15 mm dia - GI ELBOW - IS-1239 part 2 each 27.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
104 1560A 20 mm dia - GI ELBOW - IS-1239 part 2 each 38.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
105 1560B 25 mm dia - GI ELBOW - IS-1239 part 2 each 50.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
106 1560C 32 mm dia - GI ELBOW - IS-1239 part 2 each 78.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
107 1560D 40 mm dia - GI ELBOW - IS-1239 part 2 each 104.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
108 1560E 50 mm dia - GI ELBOW - IS-1239 part 2 each 142.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
109 1560F 65 mm dia - GI ELBOW - IS-1239 part 2 each 277.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
110 1560G 80 mm dia - GI ELBOW - IS-1239 part 2 each 363.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
111 1560H 100 mm dia - GI ELBOW - IS-1239 part 2 each 672.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
112 1560I 125 mm dia - GI ELBOW - IS-1239 part 2 each 2292.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
113 1560J 150 mm dia - GI ELBOW - IS-1239 part 2 each 3290.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
114 1561A 25 mm X 20 mm dia -GI red.elb.- IS-1239 part 2 each 50.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
115 1561AA 150 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 each 2840.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
116 1561AB 150 mm x 100mm dia-GI red.elb.- IS-1239 part 2 each 2856.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
117 1561AC 150 mm x 125mm dia -GI red.elb.- IS-1239 part 2 each 2860.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
118 1561B 32 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 each 76.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
119 1561C 32 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 each 76.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)

Puducherry Page 83
Sl.No. Code No. Description Unit Rate in Rs.

120 1561D 40 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 each 100.00


(UNIQUE/RBRAND/HPBRAND/UI BRAND)
121 1561D1 40 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 each 105.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
122 1561E 40 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 each 106.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
123 1561F 50 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 each 142.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
124 1561F1 50 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 each 145.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
125 1561G 50 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 each 150.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
126 1561H 50 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 each 150.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
127 1561I 65 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 each 282.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
128 1561I1 65 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 each 289.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
129 1561J 65 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 each 289.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
130 1561K 65 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 each 289.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
131 1561L 65 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 each 289.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
132 1561M 80 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 each 368.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
133 1561N 80 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 each 368.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
134 1561O 80 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 each 380.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
135 1561P 80 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 each 380.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
136 1561Q 100 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 each 692.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
137 1561R 100 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 each 692.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
138 1561S 100 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 each 692.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
139 1561T 100 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 each 692.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
140 1561U 125 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 each 2245.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
141 1561V 125 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 each 2245.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
142 1561W 125 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 each 2250.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
143 1561X 125 mm x 100mm dia -GI red.elb.- IS-1239 part 2 each 2250.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)

Puducherry Page 84
Sl.No. Code No. Description Unit Rate in Rs.

144 1561Y 150 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 each 2830.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
145 1561Z 150 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 each 2840.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
146 1562A 15mm - GI HexNipple- IS-1239 part 2 each 26.50
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
147 1562B 20mm - GI HexNipple- IS-1239 part 2 each 40.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
148 1562C 25mm - GI HexNipple- IS-1239 part 2 each 55.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
149 1562D 32mm - GI HexNipple- IS-1239 part 2 each 77.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
150 1562E 40mm - GI HexNipple- IS-1239 part 2 each 90.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
151 1562F 50mm - GI HexNipple- IS-1239 part 2 each 132.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
152 1562G 65mm - GI HexNipple- IS-1239 part 2 each 260.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
153 1562H 80mm - GI HexNipple- IS-1239 part 2 each 420.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
154 1562I 100mm - GI HexNipple- IS-1239 part 2 each 708.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
155 1563A 15mm - GI Bend- IS-1239 part 2 each 35.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
156 1563B 20mm - GI Bend- IS-1239 part 2 each 60.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
157 1563C 25mm - GI Bend- IS-1239 part 2 each 80.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
158 1563D 32mm - GI Bend- IS-1239 part 2 each 100.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
159 1563E 40mm - GI Bend- IS-1239 part 2 each 150.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
160 1563F 50mm - GI Bend- IS-1239 part 2 each 210.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
161 1563G 65mm - GI Bend- IS-1239 part 2 each 300.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
162 1563H 80mm - GI Bend- IS-1239 part 2 each 468.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
163 1563I 100mm - GI Bend- IS-1239 part 2 each 828.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
164 1563J 125mm - GI Bend- IS-1239 part 2 each 1320.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
165 1563K 150mm - GI Bend- IS-1239 part 2 each 1900.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
166 1564A 15mm - GI Coupling- IS-1239 part 2 each 26.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
167 1564B 20mm - GI Coupling- IS-1239 part 2 each 37.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)

Puducherry Page 85
Sl.No. Code No. Description Unit Rate in Rs.

168 1564C 25mm - GI Coupling- IS-1239 part 2 each 44.00


(UNIQUE/RBRAND/HPBRAND/UI BRAND)
169 1564D 32mm - GI Coupling- IS-1239 part 2 each 55.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
170 1564E 40mm - GI Coupling- IS-1239 part 2 each 65.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
171 1564F 50mm - GI Coupling- IS-1239 part 2 each 109.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
172 1564G 65mm - GI Coupling- IS-1239 part 2 each 175.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
173 1564H 80mm - GI Coupling- IS-1239 part 2 each 265.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
174 1564I 100mm - GI Coupling- IS-1239 part 2 each 424.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
175 1564J 125mm - GI Coupling- IS-1239 part 2 each 760.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
176 1564K 150mm - GI Coupling- IS-1239 part 2 each 840.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
177 1565A 15 mm - GI Plug - IS-1239 part 2 each 15.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
178 1565B 20 mm - GI Plug - IS-1239 part 2 each 20.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
179 1565C 25 mm - GI Plug - IS-1239 part 2 each 27.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
180 1565D 32 mm - GI Plug - IS-1239 part 2 each 35.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
181 1565E 40 mm - GI Plug - IS-1239 part 2 each 40.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
182 1565F 50 mm - GI Plug - IS-1239 part 2 each 60.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
183 1565G 65 mm - GI Plug - IS-1239 part 2 each 78.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
184 1565H 80 mm - GI Plug - IS-1239 part 2 each 110.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
185 1565I 100 mm - GI Plug - IS-1239 part 2 each 132.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
186 1565J 125 mm - GI Plug - IS-1239 part 2 each 252.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
187 1565K 150 mm - GI Plug - IS-1239 part 2 each 418.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
188 1566A 15mm - GI Cap - IS-1239 part 2 each 16.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
189 1566B 20mm - GI Cap - IS-1239 part 2 each 22.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
190 1566C 25mm - GI Cap - IS-1239 part 2 each 28.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
191 1566D 32mm - GI Cap - IS-1239 part 2 each 35.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)

Puducherry Page 86
Sl.No. Code No. Description Unit Rate in Rs.

192 1566E 40mm - GI Cap - IS-1239 part 2 each 50.00


(UNIQUE/RBRAND/HPBRAND/UI BRAND)
193 1566F 50mm - GI Cap - IS-1239 part 2 each 62.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
194 1566G 65mm - GI Cap - IS-1239 part 2 each 85.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
195 1566H 80mm - GI Cap - IS-1239 part 2 each 100.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
196 1566I 100mm - GI Cap - IS-1239 part 2 each 135.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
197 1566J 125mm - GI Cap - IS-1239 part 2 each 270.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
198 1566K 150mm - GI Cap - IS-1239 part 2 each 426.00
(UNIQUE/RBRAND/HPBRAND/UI BRAND)
199 1567A 15 mm dia - GI Pipe Nipple 10cm long each 27.00

200 1567B 20 mm dia - GI Pipe Nipple 10cm long each 37.00

201 1567B1 25 mm dia - GI Pipe Nipple 10cm long each 48.00

202 1567C 32 mm dia - GI Pipe Nipple 10cm long each 52.00

203 1567D 40 mm dia - GI Pipe Nipple 10cm long each 59.00

204 1567E 50 mm dia - GI Pipe Nipple 10cm long each 72.00

205 1567F 65 mm dia - GI Pipe Nipple 10cm long each 100.00

206 1567G 80 mm dia - GI Pipe Nipple 10cm long each 135.00

207 1567H 100 mm dia - GI Pipe Nipple 10cm long each 180.00

208 1567I 125 mm dia - GI Pipe Nipple 10cm long each 275.00

209 1567J 150 mm dia - GI Pipe Nipple 10cm long each 300.00

210 1568A 15 mm dia - GI Pipe Nipple 15cm long each 35.00

211 1568B 20 mm dia - GI Pipe Nipple 15cm long each 50.00

212 1568B1 25 mm dia - GI Pipe Nipple 15cm long each 65.00

213 1568C 32 mm dia - GI Pipe Nipple 15cm long each 67.00

214 1568D 40 mm dia - GI Pipe Nipple 15cm long each 80.00

215 1568E 50 mm dia - GI Pipe Nipple 15cm long each 100.00

Puducherry Page 87
Sl.No. Code No. Description Unit Rate in Rs.

216 1568F 65 mm dia - GI Pipe Nipple 15cm long each 145.00

217 1568G 80 mm dia - GI Pipe Nipple 15cm long each 198.00

218 1568H 100 mm dia - GI Pipe Nipple 15cm long each 282.00

219 1568I 125 mm dia - GI Pipe Nipple 15cm long each 322.00

220 1568J 150 mm dia - GI Pipe Nipple 15cm long each 430.00

221 1569A 15 mm dia - GI Pipe Nipple 23cm long each 37.00

222 1569B 20 mm dia - GI Pipe Nipple 23cm long each 67.00

223 1569B1 25 mm dia - GI Pipe Nipple 23cm long each 95.00

224 1569C 32 mm dia - GI Pipe Nipple 23cm long each 100.00

225 1569D 40 mm dia - GI Pipe Nipple 23cm long each 110.00

226 1569E 50 mm dia - GI Pipe Nipple 23cm long each 147.00

227 1569F 65 mm dia - GI Pipe Nipple 23cm long each 210.00

228 1569G 80 mm dia - GI Pipe Nipple 23cm long each 287.00

229 1569H 100 mm dia - GI Pipe Nipple 23cm long each 342.00

230 1569I 125 mm dia - GI Pipe Nipple 23cm long each 405.00

231 1569J 150 mm dia - GI Pipe Nipple 23cm long each 490.00

232 1570A 15 mm dia - GI Pipe Nipple 30cm long each 65.00

233 1570B 20 mm dia - GI Pipe Nipple 30cm long each 86.00

234 1570B1 25 mm dia - GI Pipe Nipple 30cm long each 120.00

235 1570C 32 mm dia - GI Pipe Nipple 30cm long each 127.00

236 1570D 40 mm dia - GI Pipe Nipple 30cm long each 147.00

237 1570E 50 mm dia - GI Pipe Nipple 30cm long each 210.00

238 1570F 65 mm dia - GI Pipe Nipple 30cm long each 290.00

239 1570G 80 mm dia - GI Pipe Nipple 30cm long each 372.00

Puducherry Page 88
Sl.No. Code No. Description Unit Rate in Rs.

240 1570H 100 mm dia - GI Pipe Nipple 30cm long each 587.00

241 1570I 125 mm dia - GI Pipe Nipple 30cm long each 632.00

242 1570J 150 mm dia - GI Pipe Nipple 30cm long each 818.00

243 1571A Ferrule-15mm - (IS-2692) each 540.00

244 1571B Ferrule-20mm - (IS-2692) each 588.00

245 1571C Ferrule-25mm - (IS-2692) each 696.00

246 1572A Mild steel bracket 40 mm x 20 mm each 130.00

247 1572AA Mild steel bracket 200 mm x 100 mm each 540.00

248 1572AB Mild steel bracket 200 mm x 125 mm each 540.00

249 1572AB1 Mild steel bracket 250 X 20 each 450.00

250 1572AB2 Mild steel bracket 250 X 40 each 450.00

251 1572AB3 Mild steel bracket 250 X 50 each 450.00

252 1572AC Mild steel bracket 250 mm x 65 mm each 600.00

253 1572AD Mild steel bracket 250 mm x 80 mm each 600.00

254 1572AE Mild steel bracket 250 mm x 100 mm each 600.00

255 1572AF Mild steel bracket 250 mm x 125 mm each 600.00

256 1572AG Mild steel bracket 250 mm x 150 mm each 600.00

257 1572AG1 Mild steel bracket 300 X 20 each 475.00

258 1572AG2 Mild steel bracket 300 X 40 each 475.00

259 1572AG3 Mild steel bracket 300 X 20 each 475.00

260 1572AH Mild steel bracket 300 mm x 65 mm each 800.00

261 1572AI Mild steel bracket 300 mm x 80 mm each 800.00

262 1572AJ Mild steel bracket 300 mm x 100 mm each 875.00

263 1572AK Mild steel bracket 300 mm x 125 mm each 875.00

Puducherry Page 89
Sl.No. Code No. Description Unit Rate in Rs.

264 1572B Mild steel bracket 50 mm x 20 mm each 140.00

265 1572C Mild steel bracket 65 mm x 20 mm each 156.00

266 1572D Mild steel bracket 65 mm x 40 mm each 168.00

267 1572E Mild steel bracket 65 mm x 50 mm each 300.00

268 1572F Mild steel bracket 80 mm x 20 mm each 347.00

269 1572G Mild steel bracket 80 mm x 40 mm each 350.00

270 1572H Mild steel bracket 80 mm x 50 mm each 350.00

271 1572I Mild steel bracket 80 mm x 65 mm each 350.00

272 1572J Mild steel bracket 100 mm x 20 mm each 368.00

273 1572K Mild steel bracket 100 mm x 40 mm each 370.00

274 1572L Mild steel bracket 100 mm x 50 mm each 370.00

275 1572M Mild steel bracket 100 mm x 65 mm each 370.00

276 1572N Mild steel bracket 100 mm x 80 mm each 370.00

277 1572O Mild steel bracket 125 mm x 20 mm each 450.00

278 1572P Mild steel bracket 125 mm x 40 mm each 450.00

279 1572Q Mild steel bracket 125 mm x 50 mm each 450.00

280 1572R Mild steel bracket 125 mm x 65 mm each 450.00

281 1572S Mild steel bracket 125 mm x 80 mm each 450.00

282 1572T Mild steel bracket 125 mm x 100 mm each 480.00

283 1572T1 Mild steel bracket 150 X 20 each 480.00

284 1572T2 Mild steel bracket 150 X 40 each 480.00

285 1572T3 Mild steel bracket 150 X 50 each 480.00

286 1572U Mild steel bracket 150 mm x 65 mm each 480.00

287 1572V Mild steel bracket 150 mm x 80 mm each 480.00

Puducherry Page 90
Sl.No. Code No. Description Unit Rate in Rs.

288 1572W Mild steel bracket 150 mm x 100 mm each 480.00

289 1572X Mild steel bracket 150 mm x 125 mm each 530.00

290 1572X1 Mild steel bracket 200 X 20 each 425.00

291 1572X2 Mild steel bracket 200 X 40 each 425.00

292 1572X3 Mild steel bracket 200 X 50 each 425.00

293 1572Y Mild steel bracket 200 mm x 65 mm each 540.00

294 1572Z Mild steel bracket 200 mm x 80 mm each 540.00

295 1573A 40mm - MS Flange each 84.00

296 1573B 50mm - MS Flange each 100.00

297 1573C 65mm - MS Flange each 160.00

298 1573D 80mm - MS Flange each 215.00

299 1573E 100mm - MS Flange each 336.00

300 1573F 125mm - MS Flange each 720.00

301 1573G 150mm - MS Flange each 950.00

302 1574A 100 mm x 80 mm dia - Reducing MS Flange each 540.00

303 1574B 125 mm x 80 mm dia - Reducing MS Flange each 700.00

304 1574C 125 mm x 100 mm dia - Reducing MS Flange each 700.00

305 1574D 150 mm x 80 mm dia - Reducing MS Flange each 960.00

306 1574E 150 mm x 100 mm dia - Reducing MS Flange each 960.00

307 1574F 150 mm x 125 mm dia - Reducing MS Flange each 960.00

308 1575A 25 mm X 20 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 65.00
(Unique,R,HB,UI)
309 1575AA 150 mm x 65 mm dia- GI reducer (unequal) Tee IS-1239 part 2 each 3394.00
(Unique,R,HB,UI)
310 1575AB 150 mm x 80 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 3394.00
(Unique,R,HB,UI)
311 1575AC 150 mm x 100 mm dia - GI reducer (unequal) Tee IS-1239 part each 3396.00
2 (Unique,R,HB,UI)

Puducherry Page 91
Sl.No. Code No. Description Unit Rate in Rs.

312 1575AD 150 mm x 125 mm dia - GI reducer (unequal) Tee IS-1239 part each 3396.00
2 (Unique,R,HB,UI)
313 1575B 32 mm x 20 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 100.00
(Unique,R,HB,UI)
314 1575C 32 mm x 25 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 106.00
(Unique,R,HB,UI)
315 1575D 40 mm x 20 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 130.00
(Unique,R,HB,UI)
316 1575D1 40 mm x 25 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 130.00
(Unique,R,HB,UI)
317 1575E 40 mm x 32 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 130.00
(Unique,R,HB,UI)
318 1575F 50 mm x20 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 200.00
(Unique,R,HB,UI)
319 1575F1 50 mm x25 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 203.00
(Unique,R,HB,UI)
320 1575G 50 mm x 32 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 203.00
(Unique,R,HB,UI)
321 1575H 50 mm x 40 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 203.00
(Unique,R,HB,UI)
322 1575I 65 mm x 20 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 319.00
(Unique,R,HB,UI)
323 1575I1 65 mm x 25 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 319.00
(Unique,R,HB,UI)
324 1575J 65 mm x 32 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 319.00
(Unique,R,HB,UI)
325 1575K 65 mm x 40 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 319.00
(Unique,R,HB,UI)
326 1575L 65 mm x 50 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 319.00
(Unique,R,HB,UI)
327 1575M 80 mm x 32 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 507.00
(Unique,R,HB,UI)
328 1575N 80 mm x 40 mm dia- GI reducer (unequal) Tee IS-1239 part 2 each 507.00
(Unique,R,HB,UI)
329 1575O 80 mm x 50 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 507.00
(Unique,R,HB,UI)
330 1575P 80 mm x 65 mm dia- GI reducer (unequal) Tee IS-1239 part 2 each 507.00
(Unique,R,HB,UI)
331 1575Q 100 mm x 40 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 820.00
(Unique,R,HB,UI)
332 1575R 100 mm x 50 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 825.00
(Unique,R,HB,UI)
333 1575S 100 mm x 65 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 830.00
(Unique,R,HB,UI)
334 1575T 100 mm x 80 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 840.00
(Unique,R,HB,UI)
335 1575U 125 mm x 40 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 2965.00
(Unique,R,HB,UI)

Puducherry Page 92
Sl.No. Code No. Description Unit Rate in Rs.

336 1575V 125 mm x 50 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 2965.00
(Unique,R,HB,UI)
337 1575W 125 mm x 65 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 2965.00
(Unique,R,HB,UI)
338 1575X 125 mm x 80 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 2965.00
(Unique,R,HB,UI)
339 1575Y 125 mm x 100 mm dia - GI reducer (unequal) Tee IS-1239 part each 2965.00
2 (Unique,R,HB,UI)
340 1575Z 150 mm x 50 mm dia - GI reducer (unequal) Tee IS-1239 part 2 each 3394.00
(Unique,R,HB,UI)
341 1596A 80 mm dia - CI flanges - IS-1538 (Electro steel / Jindal / Lanco/ each 400.00
Electro therm)
342 1596B 100mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 470.00
Lanco/ Electro therm)
343 1596C 150mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 580.00
Lanco/ Electro therm)
344 1596D 200mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 726.00
Lanco/ Electro therm)
345 1596E 250mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 990.00
Lanco/ Electro therm)
346 1596F 300mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 1254.00
Lanco/ Electro therm)
347 1596G 350mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 1650.00
Lanco/ Electro therm)
348 1596H 400mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 2112.00
Lanco/ Electro therm)
349 1596I 450mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 2607.00
Lanco/ Electro therm)
350 1596J 500mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 2970.00
Lanco/ Electro therm)
351 1596K 600mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 3762.00
Lanco/ Electro therm)
352 1596L 700mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 5115.00
Lanco/ Electro therm)
353 1596M 750mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 6996.00
Lanco/ Electro therm)
354 1596N 800mm dia - CI flanges - IS-1538 (Electro steel / Jindal / each 8124.00
Lanco/ Electro therm)
355 1598A 80 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 4394.00

356 1598B 100 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 5922.00

357 1598C 125 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 7366.00

358 1598D 150 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 8986.00

359 1598E 200 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 14553.00

Puducherry Page 93
Sl.No. Code No. Description Unit Rate in Rs.

360 1598F 250 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 23525.00

361 1598G 300 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 30015.00

362 1598H 350 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 42669.00

363 1598I 400 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 53540.00

364 1598J 450 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 77876.00

365 1598K 500 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 102211.00

366 1598L 600 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with cap each 152506.00

367 1599A 80 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 4665.00
wheel
368 1599B 100 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 6192.00
wheel
369 1599C 125 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 7636.00
wheel
370 1599D 150 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 9391.00
wheel
371 1599E 200 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 14969.00
wheel
372 1599F 250mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 24066.00
wheel
373 1599G 300 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 30420.00
wheel
374 1599H 350 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 44291.00
wheel
375 1599I 400 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 54350.00
wheel
376 1599J 450 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 79227.00
wheel
377 1599K 500 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 103563.00
wheel
378 1599L 600 mm - CI Sluice value - IS-14846/2000 - PN-1.0 with hand each 153858.00
wheel
379 1600A 80 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 4772.00

380 1600B 100 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 6402.00

381 1600C 125 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 8092.00

382 1600D 150 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 9709.00

383 1600E 200 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 15041.00

Puducherry Page 94
Sl.No. Code No. Description Unit Rate in Rs.

384 1600F 250 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 25080.00

385 1600G 300 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 32941.00

386 1600H 350 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 51203.00

387 1600I 400 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 64247.00

388 1600J 450 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 82830.00

389 1600K 500 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 120900.00

390 1600L 600 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with cap each 162984.00

391 1601A 80 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 4851.00
wheel
392 1601B 100 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 6645.00
wheel
393 1601C 125 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 8382.00
wheel
394 1601D 150 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 9999.00
wheel
395 1601E 200 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 15468.00
wheel
396 1601F 250 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 25493.00
wheel
397 1601G 300 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 33370.00
wheel
398 1601H 350 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 52015.00
wheel
399 1601I 400 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 65059.00
wheel
400 1601J 450 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 84546.00
wheel
401 1601K 500 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 120900.00
wheel
402 1601L 600 mm - CI Sluice value - IS-14846/2000 - PN-1.06 with hand each 164703.00
wheel
403 1602 20 mm - CI Single air valve each 608.00

404 1603A 40 mm - CI Double air valve each 1687.00

405 1603B 50 mm - CI Double air valve each 1703.00

406 1603C 65 mm - CI Double air valve each 2218.00

407 1603D 80 mm - CI Double air valve each 2301.00

Puducherry Page 95
Sl.No. Code No. Description Unit Rate in Rs.

408 1603E 100 mm - CI Double air valve each 2642.00

409 1603F 150 mm - CI Double air valve each 7207.00

410 1603G 200 mm - CI Double air valve each 14969.00

411 1604A 50 mm - CI Reflux non return valve IS-5312 single door PN- each 2838.00
1.6
412 1604B 65 mm - CI Reflux non return valve IS-5312 single door PN- each 3245.00
1.6
413 1604C 80 mm - CI Reflux non return valve IS-5312 single door PN- each 3786.00
1.6
414 1604D 100 mm - CI Reflux non return valve IS-5312 single door PN- each 5030.00
1.6
415 1604E 125 mm - CI Reflux non return valve IS-5312 single door PN- each 6530.00
1.6
416 1604F 150 mm - CI Reflux non return valve IS-5312 single door PN- each 7787.00
1.0
417 1604G 200 mm - CI Reflux non return valve IS-5312 single door PN- each 14927.00
1.0
418 1604H 250 mm - CI Reflux non return valve IS-5312 single door PN- each 22389.00
1.0
419 1604I 300 mm - CI Reflux non return valve IS-5312 single door PN- each 30663.00
1.0
420 1604J 350 mm - CI Reflux non return valve IS-5312 single door PN- each 54675.00
0.6
421 1604K 400 mm - CI Reflux non return valve IS-5312 single door PN- each 67330.00
0.6
422 1604L 500 mm - CI Reflux non return valve IS-5312 single door PN- each 141960.00
0.6
423 1604M 600 mm - CI Reflux non return valve IS-5312 single door PN- each 161980.00
0.6
424 1605A 80 mm Ball type nrv valve each 7000.00

425 1605AA 50 mm CI foot valve double door each 18500.00

426 1605AB 65 mm CI foot valve double door each 26500.00

427 1605AC 80 mm CI foot valve double door each 43000.00

428 1605AD 100 mm CI foot valve double door each 60000.00

429 1605AE 50 mm CI foot valve single door each 1880.00

430 1605AF 65 mm CI foot valve single door each 2200.00

431 1605AG 80 mm CI foot valve single door each 3100.00

Puducherry Page 96
Sl.No. Code No. Description Unit Rate in Rs.

432 1605AH 100 mm CI foot valve single door each 4450.00

433 1605AI 125 mm CI foot valve single door each 7400.00

434 1605AJ 150 mm CI foot valve single door each 8100.00

435 1605AK 200 mm CI foot valve single door each 19800.00

436 1605AL 250 mm CI foot valve single door each 24000.00

437 1605AM 300 mm CI foot valve single door each 36500.00

438 1605B 100 mm Ball type nrv valve each 11600.00

439 1605C 150 mm Ball type nrv valve each 17350.00

440 1605D 200 mm Ball type nrv valve each 27800.00

441 1605E 250 mm Ball type nrv valve each 42700.00

442 1605F 300 mm Ball type nrv valve each 62600.00

443 1605G 350 mm Ball type nrv valve each 93450.00

444 1605I 50 mm CI wafer type butterfly valve each 1650.00

445 1605J 65 mm CI wafer type butterfly valve each 2050.00

446 1605K 80 mm CI wafer type butterfly valve each 2250.00

447 1605L 100 mm CI wafer type butterfly valve each 2775.00

448 1605M 125 mm CI wafer type butterfly valve each 4080.00

449 1605N 150 mm CI wafer type butterfly valve each 5200.00

450 1605O 200 mm CI wafer type butterfly valve each 8600.00

451 1605P 250 mm CI wafer type butterfly valve each 11500.00

452 1605Q 300 mm CI wafer type butterfly valve each 15150.00

453 1606P 15mm dia. - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 35.00
brand)
454 1607P 20mm dia. - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 49.00
brand)
455 1608P 25mm dia. - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 63.00
brand)

Puducherry Page 97
Sl.No. Code No. Description Unit Rate in Rs.

456 1609P 32mm dia. - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 87.00
brand)
457 1610P 40mm dia. - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 140.00
brand)
458 1611P 50mm dia. - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 170.00
brand)
459 1612A 80mm dia - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 680.00
brand)
460 1612P 65mm dia. - GI tee equal - IS-1239 part 2 (UNIQUE/R,HB,UI each 282.00
brand)
461 1616AA UPVC Pipe-20mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 15.15

462 1616BB UPVC Pipe-25mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 22.80

463 1616C UPVC Pipe-32mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 37.50

464 1616D UPVC Pipe-40mm dia.(1 MPa) - (Finolex/Jain/Supreme) metre 57.00

465 1616E UPVC Pipe-50mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 90.00

466 1616F UPVC Pipe-63mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 142.00

467 1616G UPVC Pipe-75mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 202.50

468 1616H UPVC Pipe-90mm dia.(1 MPa) - (Finolex/Jain/Supreme) metre 289.00

469 1616I UPVC Pipe-110mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 433.00

470 1616J UPVC Pipe-140mm dia. (1 MPa) - (Finolex/Jain/Supreme) metre 698.00

471 1616K UPVC Pipe-160 mm dia (1 MPa) - (Finolex/Jain/Supreme) metre 685.00

472 1616L UPVC Pipe-180 mm dia (1 MPa) - (Finolex/Jain/Supreme) metre 1182.50

473 1616M UPVC Pipe- 200 mm dia(1 MPa) - (Finolex/Jain/Supreme) metre 1460.00

474 1617AA UPVC Pipe-40mm dia. (0.6 MPa) - (Supreme/Nandi/True bore metre 37.65
etc.)
475 1617BB UPVC Pipe-50mm dia. (0.6 MPa) - (Supreme/Nandi/True bore metre 56.00
etc.)
476 1617C UPVC Pipe-63mm dia. (0.6 MPa) - (Supreme/Nandi/True bore metre 86.40
etc.)
477 1617D UPVC Pipe-75mm dia. (0.6 MPa) - (Supreme/Nandi/True bore metre 121.75
etc.)
478 1617E UPVC Pipe-90mm dia.(0.6 MPa) - (Finolex/Jain/Supreme) metre 174.30

479 1617F UPVC Pipe-110mm dia. (0.6 MPa) - (Finolex/Jain/Supreme) metre 254.80

Puducherry Page 98
Sl.No. Code No. Description Unit Rate in Rs.

480 1617G UPVC Pipe-140mm dia. (0.6 MPa) - (Finolex/Jain/Supreme) metre 421.65

481 1617H UPVC Pipe-160 mm dia (0.6 MPa) - (Finolex/Jain/Supreme) metre 543.20

482 1617I UPVC Pipe-180 mm dia (0.6 MPa) - (Finolex/Jain/Supreme) metre 682.50

483 1617J UPVC Pipe- 200 mm dia (0.6 MPa) - (Finolex/Jain/Supreme) metre 869.00

484 1617K UPVC pipe 250mm dia (0.6 Mpa) - (Finolex/Jain/Supreme) metre 738.00

485 1618A PVC 140mm dia pipe metre 240.00

486 1618AA UPVC Pipe-63mm dia.(0.4 MPa) - (Supreme/Nandi/True bore metre 58.00
etc.)
487 1618BB UPVC Pipe-75mm dia. (0.4 MPa) - (Supreme/Nandi/True bore metre 83.00
etc.)
488 1618C UPVC Pipe-90mm dia. (0.4 MPa) - (Finolex/Jain/Supreme) metre 119.00

489 1618D UPVC Pipe-110mm dia. (0.4 MPa) - (Finolex/Jain/Supreme) metre 171.00

490 1618E UPVC Pipe-140mm dia. (0.4 MPa) - (Finolex/Jain/Supreme) metre 285.50

491 1618F UPVC Pipe-160mm dia. (0.4 MPa) - (Finolex/Jain/Supreme) metre 376.30

492 1618G UPVC Pipe-180mm dia. (0.4 MPa) - (Finolex/Jain/Supreme) metre 530.00

493 1618H UPVC Pipe-200mm dia. (0.4 MPa) - (Finolex/Jain/Supreme) metre 594.00

494 1640b PVC cowl 140mm dia no 39.00

495 1641P 15mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 55.00

496 1642P 20mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 75.00

497 1643P 25mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 111.00

498 1644P 32mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 158.00

499 1645P 40mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 180.00

500 1646P 50mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 275.00

501 1647P 65mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 496.00

502 1648P 80mm - GI Union IS-1239 part 2 (UNIQUE/R,HB,UI Brand) each 720.00

503 1925 Brass full way valve C.I wheel 15 mm dia each 147.00

Puducherry Page 99
Sl.No. Code No. Description Unit Rate in Rs.

504 1926 Brass full way valve C.I wheel 20 mm dia each 162.00

505 7356P 100mm dia metre 1346.00

506 7357A 125mm dia metre 1976.00

507 7357P 150mm dia metre 2234.00

508 7383P 100mm dia - GI equal tee (UNIQUE/R,HB,UI Brand) IS-1239 each 800.00
part 2
509 7384P 150mm dia - GI equal tee (UNIQUE/R,HB,UI Brand) IS-1239 each 2180.00
part 2
510 7385A 125mm dia - GI equal tee (UNIQUE/R,HB,UI Brand) IS-1239 each 1915.00
part 2
511 7397 GI check nut 125mm each 60.00

512 7398A 125mm - GI Union (UNIQUE/R,HB,UI Brand) IS-1239 part 2 each 2100.00

513 7398P 100mm - GI Union (UNIQUE/R,HB,UI Brand) IS-1239 part 2 each 950.00

514 7399P 150mm - GI Union (UNIQUE/R,HB,UI Brand) IS-1239 part 2 each 3500.00

515 7434 Gun metal NRV vertical type 100mm dia each 1250.00

516 7651B 100 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 1004.00

517 7651C 100 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 1130.00

518 7651D 100 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 2193.27


double flanged
519 7652B 150 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 1469.00

520 7652C 150 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 1686.00

521 7652D 150 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 3026.86


double flanged
522 7653B 200 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 1898.00

523 7653C 200 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 2206.00

524 7653D 200 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 4017.39


double flanged
525 7654B 250 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 2509.00

526 7654C 250 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 2899.00

527 7654D 250 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 5488.09


double flanged

Puducherry Page 100


Sl.No. Code No. Description Unit Rate in Rs.

528 7655B 300 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 3183.00

529 7655C 300 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 3672.00

530 7655D 300 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 6869.19


double flanged
531 7656B 350 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 3995.00

532 7656C 350 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 4594.00

533 7656D 350 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 8478.13


double flanged
534 7657B 400 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 4809.00

535 7657C 400 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 5518.00

536 7657D 400 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 10804.74


double flanged
537 7658B 450 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 5352.00

538 7658C 450 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 6309.00

539 7658D 450 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 12993.50


double flanged
540 7659B 500 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 6622.00

541 7659C 500 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 7617.00

542 7659D 500 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 15843.77


double flanged
543 7660B 600 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 8734.00

544 7660C 600 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 10078.00

545 7660D 600 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 20496.23


double flanged
546 7661B 700 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 11702.00

547 7661C 700 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 12858.00

548 7661D 700 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 29200.75


double flanged
549 7662B 750 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 13402.00

550 7662C 750 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 14476.00

551 7662D 800 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 35619.66


double flanged

Puducherry Page 101


Sl.No. Code No. Description Unit Rate in Rs.

552 7663B 800 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 15653.00

553 7663C 800 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 16280.00

554 7663D 900 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 46838.56


double flanged
555 7664B 900 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 18660.00

556 7664C 900 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 19592.00

557 7664D 1000 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm)- metre 55082.67


double flanged
558 7665AA 80 mm mj collar coupling - Ductile Iron each 4220.00

559 7665AB 100 mm mj collar coupling - Ductile Iron each 4860.00

560 7665AC 150 mm mj collar coupling - Ductile Iron each 8110.00

561 7665AD 200 mm mj collar coupling - Ductile Iron each 9750.00

562 7665AE 250 mm mj collar coupling - Ductile Iron each 15165.00

563 7665AF 300 mm mj collar coupling - Ductile Iron each 19392.00

564 7665AG 350 mm mj collar coupling - Ductile Iron each 32150.00

565 7665AH 400 mm mj collar coupling - Ductile Iron each 34300.00

566 7665AI 450 mm mj collar coupling - Ductile Iron each 39200.00

567 7665AJ 500 mm mj collar coupling - Ductile Iron each 46000.00

568 7665AK 600 mm mj collar coupling - Ductile Iron each 58100.00

569 7665AL 700 mm mj collar coupling - Ductile Iron each 109000.00

570 7665AM 750 mm mj collar coupling - Ductile Iron each 122000.00

571 7665AN 800 mm mj collar coupling - Ductile Iron each 140100.00

572 7665AO 900 mm mj collar coupling - Ductile Iron each 163170.00

573 7665AP 1000 mm mj collar coupling - Ductile Iron each 183618.00

574 7665B 1000 mm dia - DI K7 (Electro steel/Linco/Jindal/Electrotherm) metre 21930.00

575 7665C 1000 mm dia - DI K9 (Electro steel/Linco/Jindal/Electrotherm) metre 23065.00

Puducherry Page 102


Sl.No. Code No. Description Unit Rate in Rs.

576 7666AA 80 mm DI flange adaptor - Ductile Iron each 2900.00

577 7666AB 100 mm DI flange adaptor - Ductile Iron each 3975.00

578 7666AC 150 mm DI flange adaptor - Ductile Iron each 5965.00

579 7666AD 200 mm DI flange adaptor - Ductile Iron each 7325.00

580 7666AE 250 mm DI flange adaptor - Ductile Iron each 10250.00

581 7666AF 300 mm DI flange adaptor - Ductile Iron each 12610.00

582 7666AG 350 mm DI flange adaptor - Ductile Iron each 20100.00

583 7666AH 400 mm DI flange adaptor - Ductile Iron each 23000.00

584 7666AI 450 mm DI flange adaptor - Ductile Iron each 27500.00

585 7666AJ 500 mm DI flange adaptor - Ductile Iron each 33500.00

586 7666AK 600 mm DI flange adaptor - Ductile Iron each 44200.00

587 7667AA 80 mm Dismantling joint - Ductile Iron each 5550.00

588 7667AB 100 mm Dismantling joint - Ductile Iron each 6925.00

589 7667AC 150 mm Dismantling joint - Ductile Iron each 9915.00

590 7667AD 200 mm Dismantling joint - Ductile Iron each 13225.00

591 7667AE 250 mm Dismantling joint - Ductile Iron each 18966.00

592 7667AF 300 mm Dismantling joint - Ductile Iron each 23175.00

593 7667AG 350 mm Dismantling joint - Ductile Iron each 34567.00

594 7667AH 400 mm Dismantling joint - Ductile Iron each 43909.00

595 7667AI 450 mm Dismantling joint - Ductile Iron each 52589.00

596 7667AJ 500 mm Dismantling joint - Ductile Iron each 64286.00

597 7667AK 600 mm Dismantling joint - Ductile Iron each 89872.00

598 7667AL 700 mm Dismantling joint - Ductile Iron each 136817.00

599 7667AM 750 mm Dismantling joint - Ductile Iron each 154975.00

Puducherry Page 103


Sl.No. Code No. Description Unit Rate in Rs.

600 7667AN 800 mm Dismantling joint - Ductile Iron each 180505.00

601 7667AO 900 mm Dismantling joint - Ductile Iron each 211673.00

602 7667AP 1000 mm Dismantling joint - Ductile Iron each 276716.00

603 7682A 100mm to 300mm - DI specials IS-9523/2000 All socketed Kg 96.00


specials
604 7682B 350mm to 450mm - DI specials IS-9523/2000 All socketed Kg 122.00
specials
605 7682C 500mm to 600mm - DI specials IS-9523/2000 All socketed Kg 130.00
specials
606 7682D 700mm to 800mm - DI specials IS-9523/2000 All socketed Kg 152.00
specials
607 7682E 900mm - DI specials IS-9523/2000 All socketed specials Kg 152.00

608 7682F 1000mm - DI specials IS-9523/2000 All socketed specials Kg 159.09

609 7683A 100mm to 300mm - DI specials IS-9523/2000 All flanged Kg 122.00


specials
610 7683B 350mm to 450mm - DI specials IS-9523/2000 All flanged Kg 150.00
specials
611 7683C 500mm to 600mm - DI specials IS-9523/2000 All flanged Kg 162.00
specials
612 7683D 700mm to 800mm - DI specials IS-9523/2000 All flanged Kg 181.00
specials
613 7683E 900mm - DI specials IS-9523/2000 All flanged specials Kg 183.00

614 7683F 1000mm - DI specials IS-9523/2000 All flanged specials Kg 183.00

615 7684A 80 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 1127.64

616 7684B 100 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 1364.81

617 7684C 125 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 1768.06

618 7684D 150 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 2162.32

619 7684E 200 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 3163.93

620 7684F 250 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 4263.59

621 7684G 300 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 5497.35

622 7684H 350 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 6926.21

623 7684I 400 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 8428.11

Puducherry Page 104


Sl.No. Code No. Description Unit Rate in Rs.

624 7684J 450 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 10163.17

625 7684K 500 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 11898.23

626 7684L 600 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 15855.62

627 7684M 700 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 20455.39

628 7684N 750 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 22976.88

629 7684O 800 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 26183.00

630 7684P 900 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 31577.00

631 7684Q 1000 mm dia - S&S centrifugally Spun CI pipes IS-1536 metre 37318.00

632 7685A 80mm to 200mm dia - non-standard - S&S centrifugally Spun Kg 80.00
CI pipes
633 7685B 250mm to 400mm dia - non-standard - S&S centrifugally Spun Kg 93.00
CI pipes
634 7685C 450mm to 750mm dia - non-standard - S&S centrifugally Spun Kg 103.00
CI pipes
635 7685D 800mm to 1000mm dia - non-standard - S&S centrifugally Kg 104.00
Spun CI pipes
636 7686A 80mm to 200mm dia - CI S/S specials - IS-1538 Kg 80.00

637 7686B 250mm to 400mm dia - CI S/S specials - IS-1538 Kg 93.00

638 7686C 450mm to 750mm dia - CI S/S specials - IS-1538 Kg 102.00

639 7686D 800mm to 1000mm dia - CI S/S specials - IS-1538 Kg 104.00

640 7687A 80 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 2245.00

641 7687B 100 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 2789.00

642 7687C 150 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 4539.00

643 7687D 200 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 6495.00

644 7687E 250 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 8731.00

645 7687F 300 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 11199.00

646 7687G 350 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 16054.00

647 7687H 400 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 19602.00

Puducherry Page 105


Sl.No. Code No. Description Unit Rate in Rs.

648 7687I 450 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 23920.00

649 7687J 500 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 29702.00

650 7687K 600 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 39923.00

651 7687L 700 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 52263.00

652 7687M 750 mm dia - Double flanged CI pipes IS-1537 & IS-7181 metre 59288.00

653 7688A 80mm to 200mm dia - Non-standard double flanged pipes Kg 130.00

654 7688B 250mm to 400mm dia - Non-standard double flanged pipes Kg 138.00

655 7688C 450mm to 750mm dia - Non-standard double flanged pipes Kg 147.00

656 7689A 80mm to 200mm dia - CI double flanged specials IS-1538 Kg 140.00

657 7689B 250mm to 400mm dia - CI double flanged specials IS-1538 Kg 150.00

658 7689C 450mm to 750mm dia - CI double flanged specials IS-1538 Kg 154.00

659 8001 Adhesive solvent cement (finolex / jain) litre 300.00

660 8021A 20mm (1 MPa) - UPVC moulded equal tee IS-7834 each 7.20
(Finolex/Jain/Supreme)
661 8021B 25mm (1 MPa) - UPVC moulded equal tee IS-7834 each 7.95
(Finolex/Jain/Supreme)
662 8021C 32mm (1 MPa) - UPVC moulded equal tee IS-7834 each 12.50
(Finolex/Jain/Supreme)
663 8021D 40mm (1 MPa) - UPVC moulded equal tee IS-7834 each 21.00
(Finolex/Jain/Supreme)
664 8021E 50mm (1 MPa) - UPVC moulded equal tee IS-7834 each 35.00
(Finolex/Jain/Supreme)
665 8021F 63mm (1 MPa) - UPVC moulded equal tee IS-7834 each 60.00
(Finolex/Jain/Supreme)
666 8021G 75mm (1 MPa) - UPVC moulded equal tee IS-7834 each 93.00
(Finolex/Jain/Supreme)
667 8021H 90mm (1 MPa) - UPVC moulded equal tee IS-7834 each 145.00
(Finolex/Jain/Supreme)
668 8021I 110mm (1 MPa) - UPVC moulded equal tee IS-7834 each 215.00
(Finolex/Jain/Supreme)
669 8021J 75mm (0.6 MPa) - UPVC moulded equal tee IS-7834 each 46.25
(Finolex/Jain/Supreme)
670 8021K 90mm (0.6 MPa) - UPVC moulded equal tee IS-7834 each 68.25
(Finolex/Jain/Supreme)
671 8021L 110mm (0.6 MPa) - UPVC moulded equal tee IS-7834 each 136.00
(Finolex/Jain/Supreme)

Puducherry Page 106


Sl.No. Code No. Description Unit Rate in Rs.

672 8021M 140mm (0.6 MPa) - UPVC moulded equal tee IS-7834 each 203.50
(Finolex/Jain/Supreme)
673 8021N 160mm (0.6 MPa) - UPVC moulded equal tee IS-7834 each 302.50
(Finolex/Jain/Supreme)
674 8022A 63mm x 50mm (0.6 MPa) - UPVC moulded unequal tee IS- each 62.25
7834 (Finolex/Jain/Supreme)
675 8022B 75mm x 50mm (0.6 MPa) - UPVC moulded unequal tee IS- each 70.15
7834 (Finolex/Jain/Supreme)
676 8022C 90mm x 50mm (0.6 MPa) - UPVC moulded unequal tee IS- each 108.10
7834 (Finolex/Jain/Supreme)
677 8022D 90mm X63mm (0.6 MPa) - UPVC moulded unequal tee IS- each 115.00
7834 (Finolex/Jain/Supreme)
678 8022E 90mm x 75mm (0.6 MPa) - UPVC moulded unequal tee IS- each 139.70
7834 (Finolex/Jain/Supreme)
679 8022F 110mm x 50mm (0.6 MPa) - UPVC moulded unequal tee IS- each 184.00
7834 (Finolex/Jain/Supreme)
680 8022G 110mm x 63mm (0.6 MPa) - UPVC moulded unequal tee IS- each 176.00
7834 (Finolex/Jain/Supreme)
681 8022H 110mm x 90mm (0.6 MPa) - UPVC moulded unequal tee IS- each 145.00
7834 (Finolex/Jain/Supreme)
682 8022I 140mm x 50mm (0.6 MPa) - UPVC moulded unequal tee IS- each 267.00
7834 (Finolex/Jain/Supreme)
683 8022J 140mm x 63mm (0.6 MPa) - UPVC moulded unequal tee IS- each 370.00
7834 (Finolex/Jain/Supreme)
684 8022K 140mm x 90mm (0.6 MPa) - UPVC moulded unequal tee IS- each 280.00
7834 (Finolex/Jain/Supreme)
685 8022L 140mm x 110mm (0.6 MPa)-UPVC moulded unequal tee IS- each 297.00
7834 (Finolex/Jain/Supreme)
686 8022M 160mm x 50mm (0.6 MPa)-UPVC moulded unequal tee IS- each 420.00
7834 (Finolex/Jain/Supreme)
687 8022N 160mm x 63mm (0.6 MPa)-UPVC moulded unequal tee IS- each 495.00
7834 (Finolex/Jain/Supreme)
688 8022O 160mm x 90mm (0.6 MPa)-UPVC moulded unequal tee IS- each 355.00
7834 (Finolex/Jain/Supreme)
689 8022P 160mm x 110mm (0.6 MPa)-UPVC moulded unequal tee IS- each 380.00
7834 (Finolex/Jain/Supreme)
690 8022Q 160mm x 140mm (0.6 MPa)-UPVC moulded unequal tee IS- each 727.40
7834 (Finolex/Jain/Supreme)
691 8023A 20mm (1 MPa) - UPVC moulded unequal plain coupler IS-7834 each 8.00
(Finolex/Jain/Supreme)
692 8023B 25mm (1 MPa) - UPVC moulded unequal plain coupler IS-7834 each 11.50
(Finolex/Jain/Supreme)
693 8023C 32mm (1 MPa) - UPVC moulded unequal plain coupler IS-7834 each 13.00
(Finolex/Jain/Supreme)
694 8023D 40mm (1 MPa) - UPVC moulded unequal plain coupler IS-7834 each 22.50
(Finolex/Jain/Supreme)
695 8023E 50mm (1 MPa) - UPVC moulded unequal plain coupler IS-7834 each 36.75
(Finolex/Jain/Supreme)

Puducherry Page 107


Sl.No. Code No. Description Unit Rate in Rs.

696 8023F 63mm (0.6 MPa)-UPVC moulded unequal plain coupler IS- each 70.00
7834 (Finolex/Jain/Supreme)
697 8023G 75mm (0.6 MPa)-UPVC moulded unequal plain coupler IS- each 90.00
7834 (Finolex/Jain/Supreme)
698 8023H 90mm (0.6 MPa)-UPVC moulded unequal plain coupler IS- each 142.00
7834 (Finolex/Jain/Supreme)
699 8023I 110mm (0.6MPa)-UPVC moulded unequal plain coupler IS- each 170.00
7834 (Finolex/Jain/Supreme)
700 8023J 140mm (0.6MPa)-UPVC moulded unequal plain coupler IS- each 192.00
7834 (Finolex/Jain/Supreme)
701 8023K 160mm (0.6MPa)-UPVC moulded unequal plain coupler IS- each 220.00
7834 (Finolex/Jain/Supreme)
702 8024A 25mm x 20mm(1 MPa) -UPVC moulded reducer coupler IS- each 4.00
7834 (Finolex/Jain/Supreme)
703 8024B 32mm x 25mm(1 MPa) -UPVC moulded reducer coupler IS- each 6.50
7834 (Finolex/Jain/Supreme)
704 8024C 40mm x 32mm(1 MPa) - UPVC moulded reducer coupler IS- each 10.00
7834 (Finolex/Jain/Supreme)
705 8024D 50mm x 40mm(1 MPa) - UPVC moulded reducer coupler IS- each 21.75
7834 (Finolex/Jain/Supreme)
706 8024E 63mm x 40mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 26.75
7834 (Finolex/Jain/Supreme)
707 8024F 63mm x 50mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 34.00
7834 (Finolex/Jain/Supreme)
708 8024G 75mm x 63mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 61.75
7834 (Finolex/Jain/Supreme)
709 8024H 90mm x 63mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 70.25
7834 (Finolex/Jain/Supreme)
710 8024I 90mm x 75mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 74.75
7834 (Finolex/Jain/Supreme)
711 8024J 110mmx75mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 108.00
7834 (Finolex/Jain/Supreme)
712 8024K 110mmx90mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 84.00
7834 (Finolex/Jain/Supreme)
713 8024L 160mmx110mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 210.00
7834 (Finolex/Jain/Supreme)
714 8024M 160mmx140mm(0.6 MPa)-UPVC moulded reducer coupler IS- each 216.00
7834 (Finolex/Jain/Supreme)
715 8025A 20mm (1 MPa) - UPVC moulded elbow IS-7834 each 4.50
(Finolex/Jain/Supreme)
716 8025B 25mm (1 MPa) - UPVC moulded elbow IS-7834 each 5.70
(Finolex/Jain/Supreme)
717 8025C 32mm (1 MPa) - UPVC moulded elbow IS-7834 each 8.35
(Finolex/Jain/Supreme)
718 8025D 40mm (1 MPa) - UPVC moulded elbow IS-7834 each 18.00
(Finolex/Jain/Supreme)
719 8025E 50mm (1 MPa) - UPVC moulded elbow IS-7834 each 31.00
(Finolex/Jain/Supreme)

Puducherry Page 108


Sl.No. Code No. Description Unit Rate in Rs.

720 8025F 63mm (1 MPa) - UPVC moulded elbow IS-7834 each 49.00
(Finolex/Jain/Supreme)
721 8025G 75mm (1 MPa) - UPVC moulded elbow IS-7834 each 65.00
(Finolex/Jain/Supreme)
722 8025H 90mm (1 MPa) - UPVC moulded elbow IS-7834 each 117.00
(Finolex/Jain/Supreme)
723 8025I 110mm (1 MPa) - UPVC moulded elbow IS-7834 each 233.00
(Finolex/Jain/Supreme)
724 8025J 63mm (0.6 MPa) - UPVC moulded elbow IS-7834 each 20.00
(Finolex/Jain/Supreme)
725 8025K 75mm (0.6 MPa) - UPVC moulded elbow IS-7834 each 33.00
(Finolex/Jain/Supreme)
726 8025L 90mm (0.6 MPa) - UPVC moulded elbow IS-7834 each 53.00
(Finolex/Jain/Supreme)
727 8025M 110mm (0.6 MPa) - UPVC moulded elbow IS-7834 each 86.00
(Finolex/Jain/Supreme)
728 8025N 140mm (0.6 MPa) - UPVC moulded elbow IS-7834 each 160.00
(Finolex/Jain/Supreme)
729 8025O 160mm (0.4 MPa) - UPVC moulded elbow IS-7834 each 235.00
(Finolex/Jain/Supreme)
730 8026A 20X15mm(1 MPa)-UPVC moulded male threaded adopter IS- each 3.25
7834 (Finolex/Jain/Supreme)
731 8026B 25X20mm(1 MPa)-UPVC moulded male threaded adopter IS- each 7.50
7834 (Finolex/Jain/Supreme)
732 8026C 32X25mm(1 Mpa)-UPVC moulded male threaded adopter IS- each 10.00
7834 (Finolex/Jain/Supreme)
733 8026D 40X32mm(1 MPa)-UPVC moulded male threaded adopter IS- each 14.50
7834 (Finolex/Jain/Supreme)
734 8026E 50X40mm(0.6 MPa)-UPVC mou. male threaded adopter IS- each 18.50
7834 (Finolex/Jain/Supreme)
735 8026F 63X50mm(0.6 MPa)-UPVC mou. male threaded adopter IS- each 25.00
7834 (Finolex/Jain//Supreme)
736 8026G 75X63mm(0.6 MPa)-UPVC mou. male threaded adopter IS- each 46.00
7834 (Finolex/Jain/Supreme)
737 8026H 90X75mm(0.6 MPa)-UPVC mou. male threaded adopter IS- each 66.00
7834 (Finolex/Jain/Supreme)
738 8026I 110X90mm(0.6 MPa)-UPVC mou. male threaded adopter IS- each 88.00
7834(Finolex/Jain/Supreme)
739 8027A 20mmX15mm(1 MPa)-UPVC mou.female threaded adopter IS- each 7.20
7834 (Finolex/Jain/Supreme)
740 8027B 25mmX20mm(1 MPa)-UPVC mou.female threaded adopter IS- each 9.25
7834 (Finolex/Jain/Supreme)
741 8027C 32mmX25mm(1 MPa)-UPVC mou.female threaded adopter IS- each 13.00
7834 (Finolex/Jain/Supreme)
742 8027D 75mmX63mm(0.6 MPa)-UPVC mou.female threaded adopter each 55.00
IS-7834(Finolex/Jain/Supreme
743 8027E 90mmX63mm(0.6 MPa)-UPVC mou.female threaded adopter each 72.00
IS-7834(Finolex/Jain/Supreme

Puducherry Page 109


Sl.No. Code No. Description Unit Rate in Rs.

744 8027F 90mmX75mm(0.6 MPa)-UPVC mou.female threaded adopter each 78.00


IS-7834(Finolex/Jain/Supreme
745 8028A 20mm (1 MPa) - UPVC end cap (plain/threaded) IS-7834 each 2.10
(Finolex/Jain/Supreme)
746 8028B 25mm (1 MPa) - UPVC end cap (plain/threaded) IS-7834 each 3.15
(Finolex/Jain/Supreme)
747 8028C 32mm (1 MPa) - UPVC end cap (plain/threaded) IS-7834 each 4.15
(Finolex/Jain/Supreme)
748 8028D 40mm (1 MPa) - UPVC end cap (plain/threaded) IS-7834 each 11.45
(Finolex/Jain/Supreme)
749 8028E 50mm (1 MPa) - UPVC end cap (plain/threaded) IS-7834 each 15.60
(Finolex/Jain/Supreme)
750 8028F 63mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 18.75
(Finolex/Jain/Supreme)
751 8028G 75mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 28.15
(Finolex/Jain/Supreme)
752 8028H 90mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 47.00
(Finolex/Jain/Supreme)
753 8028I 110mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 52.00
(Finolex/Jain/Supreme)
754 8028J 140mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 90.00
(Finolex/Jain/Supreme)
755 8028K 160mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 122.65
(Finolex/Jain/Supreme)
756 8028L 180mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 180.00
(Finolex/Jain/Supreme)
757 8028M 200mm (0.6 MPa) - UPVC end cap (plain/threaded) IS-7834 each 220.00
(Finolex/Jain/Supreme)
758 8029A 63mm - UPVC moulded tail piecs without flange IS-7834 each 19.00
(Finolex/Jain/Supreme)
759 8029B 75mm - UPVC moulded tail piecs without flange IS-7834 each 31.00
(Finolex/Jain/Supreme)
760 8029C 90mm - UPVC moulded tail piecs without flange IS-7834 each 35.00
(Finolex/Jain/Supreme)
761 8029D 110mm - UPVC moulded tail piecs without flange IS-7834 each 46.00
(Finolex/Jain/Supreme)
762 8029E 140mm - UPVC moulded tail piecs without flange IS-7834 each 104.00
(Finolex/Jain/Supreme)
763 8029F 160mm - UPVC moulded tail piecs without flange IS-7834 each 144.00
(Finolex/Jain/Supreme)
764 8029G 180mm - UPVC moulded tail piecs without flange IS-7834 each 236.00
(Finolex/Jain/Supreme)
765 8029H 200mm - UPVC moulded tail piecs without flange IS-7834 each 319.00
(Finolex/Jain/Supreme)
766 8030A 63mm X 20mm - UPVC moulded saddle set 0.6Mpa IS-7834 each 55.00
(Finolex/Jain/Supreme)
767 8030B 75mm x 20mm - UPVC moulded saddle set 0.6Mpa IS-7834 each 59.00
(Finolex/Jain/Supreme)

Puducherry Page 110


Sl.No. Code No. Description Unit Rate in Rs.

768 8030C 90mm x 20mm - UPVC moulded saddle set 0.6Mpa IS-7834 each 65.00
(Finolex/Jain/Supreme)
769 8030D 110mmx20mm - UPVC moulded saddle set 0.6Mpa IS-7834 each 80.00
(Finolex/Jain/Supreme)
770 8030E 140mm x 20mm - UPVC moulded saddle set 0.6Mpa IS-7834 each 165.00
(Finolex/Jain/Supreme)
771 8030F 160mmx20mm - UPVC moulded saddle set 0.6Mpa IS-7834 each 206.00
(Finolex/Jain/Supreme)
772 8031A 63mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 26.75
(Finolex/Jain/Supreme)
773 8031B 75mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 41.00
(Finolex/Jain/Supreme)
774 8031C 90mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 66.00
(Finolex/Jain/Supreme)
775 8031D 110mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 95.00
(Finolex/Jain/Supreme)
776 8031E 140mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 171.00
(Finolex/Jain/Supreme)
777 8031F 160mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 203.00
(Finolex/Jain/Supreme)
778 8031G 180mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 285.00
(Finolex/Jain/Supreme)
779 8031H 200mm - UPVC moulded saddle set 0.6Mpa IS-10124 each 329.00
(Finolex/Jain/Supreme)
780 8032A 63mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 38.00
(Finolex/Jain/Supreme)
781 8032B 75mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 53.00
(Finolex/Jain/Supreme)
782 8032C 90mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 76.00
(Finolex/Jain/Supreme)
783 8032D 110mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 113.00
(Finolex/Jain/Supreme)
784 8032E 140mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 203.00
(Finolex/Jain/Supreme)
785 8032F 160mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 253.00
(Finolex/Jain/Supreme)
786 8032G 180mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 329.00
(Finolex/Jain/Supreme)
787 8032H 200mm - UPVC fabricated coupler 0.6Mpa IS-10124 each 367.00
(Finolex/Jain/Supreme)
788 8033A 63mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 71.00
(Finolex/Jain/Supreme)
789 8033B 75mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 93.00
(Finolex/Jain/Supreme)
790 8033C 90mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 146.00
(Finolex/Jain/Supreme)
791 8033D 110mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 184.00
(Finolex/Jain/Supreme)

Puducherry Page 111


Sl.No. Code No. Description Unit Rate in Rs.

792 8033E 140mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 245.00
(Finolex/Jain/Supreme)
793 8033F 160mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 292.00
(Finolex/Jain/Supreme)
794 8033G 180mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 355.00
(Finolex/Jain/Supreme)
795 8033H 200mm - UPVC fabricated coupler 1.0Mpa IS-10124 each 405.00
(Finolex/Jain/Supreme)
796 8034A 63mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 39.00
(Finolex/Jain/Supreme)
797 8034B 75mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 58.00
(Finolex/Jain/Supreme)
798 8034C 90mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 96.00
(Finolex/Jain/Supreme)
799 8034D 110mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 121.00
(Finolex/Jain/Supreme)
800 8034E 140mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 248.00
(Finolex/Jain/Supreme)
801 8034F 160mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 418.00
(Finolex/Jain/Supreme)
802 8034G 180mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 506.00
(Finolex/Jain/Supreme)
803 8034H 200mm - UPVC fabricated coupler 0.4Mpa IS-10124 each 572.00
(Finolex/Jain/Supreme)
804 8035A 63mm - UPVC fabricated bend 0.6Mpa IS-10124 each 51.00
(Finolex/Jain/Supreme)
805 8035B 75mm - UPVC fabricated bend 0.6Mpa IS-10124 each 76.00
(Finolex/Jain/Supreme)
806 8035C 90mm - UPVC fabricated bend 0.6Mpa IS-10124 each 121.00
(Finolex/Jain/Supreme)
807 8035D 110mm - UPVC fabricated bend 0.6Mpa IS-10124 each 165.00
(Finolex/Jain/Supreme)
808 8035E 140mm - UPVC fabricated bend 0.6Mpa IS-10124 each 355.00
(Finolex/Jain/Supreme)
809 8035F 160mm - UPVC fabricated bend 0.6Mpa IS-10124 each 538.00
(Finolex/Jain/Supreme)
810 8035G 180mm - UPVC fabricated bend 0.6Mpa IS-10124 each 671.00
(Finolex/Jain/Supreme)
811 8035H 200mm - UPVC fabricated bend 0.6Mpa IS-10124 each 823.00
(Finolex/Jain/Supreme)
812 8036A 63mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 89.00
(Finolex/Jain/Supreme)
813 8036B 75mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 126.00
(Finolex/Jain/Supreme)
814 8036C 90mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 178.00
(Finolex/Jain/Supreme)
815 8036D 110mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 227.00
(Finolex/Jain/Supreme)

Puducherry Page 112


Sl.No. Code No. Description Unit Rate in Rs.

816 8036E 140mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 445.00
(Finolex/Jain/Supreme)
817 8036F 160mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 600.00
(Finolex/Jain/Supreme)
818 8036G 180mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 729.00
(Finolex/Jain/Supreme)
819 8036H 200mm - UPVC fabricated bend 1.0 Mpa IS-10124 each 875.00
(Finolex/Jain/Supreme)
820 8037 Water meter (incl.testing)15mm(Dasmesh) each 640.00

821 8401 150mm - D/F gate valve (VAG,AVK,Fouress) each 20518.00

822 8402 200mm - D/F gate valve (VAG,AVK,Fouress) each 34097.00

823 8403 300mm - D/F gate valve (VAG,AVK,Fouress) each 71731.00

824 8404 400mm - D/F gate valve (VAG,AVK,Fouress) each 198549.00

825 8405 150mm D/F Swing check valves / non return valves each 43254.00

826 1556A Electromagnetic Bulk flow meter each 110381.00


(KROHNE/YOKOGWA/EMERSON) - 100 mm dia
827 1556AA Fixing of electromagnetic bulk flow meter -100mm dia each 1500.00

828 1556B Electromagnetic Bulk flow meter each 164922.20


(KROHNE/YOKOGWA/EMERSON) - 200 mm dia
829 1556BA Fixing of electromagnetic bulk flow meter -200mm dia each 2500.00

830 1556C Electromagnetic Bulk flow meter each 220762.00


(KROHNE/YOKOGWA/EMERSON) - 300 mm dia
831 1556CA Fixing of electromagnetic bulk flow meter -300mm dia each 3000.00

832 1556D Electromagnetic Bulk flow meter each 324650.00


(KROHNE/YOKOGWA/EMERSON) - 400 mm dia
833 1556DA Fixing of electromagnetic bulk flow meter -400mm dia each 4500.00

834 E0198 copper plate no 210.00

835 E1 1.5Sqmm cable metre 10.00

836 E110 pendant holder each 12.00

837 E117 63A TP main switch each 1870.00

838 E118 100A TP main switch each 3900.00

839 E124 100A four pole change over switch each 7072.00

Puducherry Page 113


Sl.No. Code No. Description Unit Rate in Rs.

840 E125 200A four pole change over switch each 9729.00

841 E126 400A four pole change over switch each 16140.00

842 E172 15W incandescent bulb each 13.00

843 E277 8 SWG GI wire kg 66.00

844 E278 8 SWG copper wire kg 517.00

845 E280 charcoal kg 20.00

846 E281 salt kg 4.00

847 E289 Drilling of 46 nos,12mm dia.holes on GI pipe 1L.S 110.00

848 E290 charges for making hole with auger 1L.S 660.00

849 E3 4 Sqmm cable metre 22.00

850 E303 40 x 6mm G.I earth clamp set 242.00

851 E312 copper flat 25 x 3 metre 715.00

852 E318 GI flat 25 x 3 metre 98.00

853 E381 100Aporcelain fuse each 306.00

854 E387 32-100A HRC fuselink each 369.00

855 E388 125A HRC fuselink each 400.00

856 E403 32/63/100/200A HRC fuse base each 353.00

857 E405 400-630A HRc fuse each 676.00

858 E413 200A TPN cubical switch each 6785.00

859 E419 63A TPN cubical switch each 1644.00

860 E420 125A TPN cubical switch each 4255.00

861 E421 200A TPN cubical switch DIN each 4450.00

862 E436 4x25sqmm cable metre 214.00

863 E437 4x50sqmm cable metre 338.00

Puducherry Page 114


Sl.No. Code No. Description Unit Rate in Rs.

864 E438 3.5 X 95Sq mm cable metre 512.00

865 E439 3.5 X 120Sq mm cable metre 543.00

866 E440 3.5 X 150Sq mm cable metre 739.00

867 E441 3.5 X 185Sq mm cable metre 813.00

868 E442 3.5 X 240Sq mm cable metre 1151.00

869 E443 3.5 X 300Sq mm cable metre 1406.00

870 E467 copper gland 4 x 25Sqmm cable each 70.00

871 E469 copper gland 4 x 50Sqmm cable each 115.00

872 E470 copper gland 3.5x 95Sqmm cable each 135.00

873 E471 copper gland 3.5 x 120Sqmm cable each 149.00

874 E472 copper gland 3.5 x 150Sqmm cable each 192.00

875 E473 copper gland 3.5 x 195Sqmm cable each 297.00

876 E474 copper gland 3.5 x 240Sqmm cable each 308.00

877 E475 copper gland 3.5 x 300 Sqmm cable each 445.00

878 E479 25 Sqmm aluminium lug each 2.30

879 E481 50 Sqmm aluminium lug each 4.60

880 E483 95 Sqmm aluminium lug each 7.70

881 E484 120 Sqmm aluminium lug each 10.75

882 E485 150 Sqmm aluminium lug each 13.90

883 E486 185 Sqmm aluminium lug each 17.35

884 E487 240 Sqmm aluminium lug each 29.70

885 E488 300 Sqmm aluminium lug each 41.70

886 E517 4Sqmm metre 100.00

887 E518 6Sqmm metre 140.00

Puducherry Page 115


Sl.No. Code No. Description Unit Rate in Rs.

888 E519 10Sqmm metre 230.00

889 E521 DOL starter 0.5HP-5HP each 1485.00

890 E522 4HP to 15HP starter each 5192.00

891 E523 20HP starter each 6116.00

892 E524 20HP - 25 HP starter each 9000.00

893 E525 30HP starter each 11500.00

894 E526 35HP starter each 14000.00

895 E527 50HP starter each 21000.00

896 E528 40 HP oil starter no 73766.00

897 E529 50 HP oil starter no 103961.00

898 E530 60 HP oil starter no 112970.00

899 E531 75 HP oil starter no 145640.00

900 E532 100 HP oil starter no 179740.00

901 E533 125 HP oil starter no 193600.00

902 E534 150 HP oil starter no 208857.00

903 E535 Transformer oil litre 85.00

904 E549 aerial board each 193.00

905 E550 25x6mm pole clamp each 242.00

906 E552 Analog ammeter each 2576.00

907 E554 Analog voltmeter each 2710.00

908 E577 Toggle switch each 72.00

909 E583 signal lamp-red,yellow,green,ampour each 118.00

910 E584 signal lamp-blue each 402.00

911 E7492 Lightening Arrestor no 4400.00

Puducherry Page 116


Sl.No. Code No. Description Unit Rate in Rs.

912 E87 5/6amps switch one way no 12.00

913 EC320 5 HP Monoblock centrifugal pumpset no 33038.00

914 EC321 7.5 HP Monoblock centrifugal pumpset no 35275.00

915 EC322 10 HP Monoblock centrifugal pumpset no 47859.00

916 EC330 15 HP Centrifugal motor pumpset no 182359.00

917 EC331 20 HP Centrifugal motor pumpset no 201327.00

918 EC332 25 HP Centrifugal motor pumpset no 231588.00

919 EC333 30 HP Centrifugal motor pumpset no 279232.00

920 EC334 40 HP Centrifugal motor pumpset no 345020.00

921 EC335 50 HP Centrifugal motor pumpset no 384048.00

922 EC336 60 HP Centrifugal motor pumpset no 399998.00

923 EC337 75 HP Centrifugal motor pumpset no 499139.00

924 EC338 100 HP Centrifugal motor pumpset no 826308.00

925 EG350 30 KVA / 24 KW Generator set (Air cooled) no 431426.00

926 EG351 40 KVA / 32 KW Generator set (Air cooled) no 438726.00

927 EG352 50 KVA / 40 KW Generator set (Air cooled) no 564667.00

928 EG353 62.5 KVA / 50 KW Generator set (Air cooled) no 599100.00

929 EG354 75 KVA / 60 KW Generator set (Water cooled) no 599513.00

930 EG355 82.5 KVA / 66 KW Generator set (Water cooled) no 609646.00

931 EG356 100 KVA / 80 KW Generator Set (Water cooled) no 707876.00

932 EG357 125 KVA / 100 KW Generator set (Water cooled) no 744480.00

933 EG358 160 KVA / 128 KW Generator set (Water cooled) no 962654.00

934 EG359 200 KVA / 160 KW Generator Set (Water cooled) no 1166574.00

935 EG360 250 KVA / 200 KW Generator Set (Water cooled) no 1401403.00

Puducherry Page 117


Sl.No. Code No. Description Unit Rate in Rs.

936 EG361 65mm dia exhaust pipe (upto to 40KVA) job 5390.00

937 EG362 80mm dia exhaust pipe (from 50KVA to 40KVA) job 6710.00

938 EG363 100mm dia exhaust pipe (from 100KVA to 160KVA) job 9130.00

939 EG364 125mm dia exhaust pipe (from 200KVA to 250KVA) job 11220.00

940 EG365 Aluminium cladding with 50mm thick glass wool Sqm 1320.00

941 EG366 Fire extinquisher and fire bucket job 5258.00

942 EG367 MS angle frame for genset no 550.00

943 EG368 Frame and wall painting no 220.00

944 EG369 Transportation and erecton charge for genset upto 50KVA no 16500.00

945 EG370 Transportation and erecton charge for genset upto 100KVA no 19250.00

946 EG371 Transportation and erecton charge for genset upto 200KVA no 26400.00

947 EG372 Transportation and erecton charge for genset ABOVE200KVA no 33000.00

948 ES01 C.T Coil 100/5 no 210.00

949 ES02 Slide lock fuse each 62.00

950 ES03 2A fuse link each 32.00

951 ES04 Box size 90X30X15 cm no 2200.00

952 ES05 Angle frame 30X30X6mm no 825.00

953 ES06 Flush type fuse each 12.00

954 ES07 preventor no 1045.00

955 ES08 Power capacitor 4KVAR each 1190.00

956 ES09 Power capacitor 6KVAR each 1675.00

957 ES10 Power capacitor 7.5KVAR each 2093.00

958 ES11 Power capacitor 10KVAR each 2791.00

959 ES12 Power capacitor 12.5KVAR each 3465.00

Puducherry Page 118


Sl.No. Code No. Description Unit Rate in Rs.

960 ES13 Power capacitor 15KVAR each 4184.00

961 ES14 Power capacitor20KVAR each 5586.00

962 ES15 Power capacitor 25KVAR each 6976.00

963 ES16 Fabrication M.S angle frame- power capacitor LS 165.00

964 ES17 3.5 X 70Sq mm cable metre 323.00

965 ES18 charges for making hole no 250.00

966 ES19 pvc columns pipes-50mm dia metre 270.00

967 ES20 pvc columns pipes-65mm dia metre 331.00

968 ES21 pvc columns pipes-75/80mm dia metre 510.00

969 ES22 pvc columns pipes-100mm dia metre 725.00

970 ES23 C.I adopter-50mm dia no 776.00

971 ES24 C.I adopter-65mm dia no 1009.00

972 ES25 C.I adopter-75/80mm dia no 1210.00

973 ES26 C.I adopter-100mm dia no 2400.00

974 ES27 nylon rope LS 52.00

975 ES28 m.s clamp-80/100mm dia LS 650.00

976 ES29 wiring no 780.00

977 ES30 C.T metering panel board no 16500.00

978 ES300 5 HP submersible pumpset no 42893.00

979 ES301 5 HP submersible pumpset(Open well) no 29993.00

980 ES302 7.5 HP submersible pumpset no 45255.00

981 ES303 7.5 HP submersible pumpset(Open well) no 34960.00

982 ES304 10 HP submersible pumpset no 54296.00

983 ES305 10 HP submersible pumpset(Open well) no 51555.00

Puducherry Page 119


Sl.No. Code No. Description Unit Rate in Rs.

984 ES306 12.5 HP submersible pumpset no 62822.00

985 ES307 15 HP submersible pumpset no 71379.00

986 ES308 17.5 HP submersible pumpset no 78110.00

987 ES309 20 HP submersible pumpset no 90405.00

988 ES31 erection of C.T panel no 220.00

989 ES310 25 HP submersible pumpset no 93471.00

990 ES311 30 HP submersible pumpset no 96222.00

991 ES312 35 HP submersible pumpset no 101136.00

992 ES313 40 HP submersible pumpset no 104790.00

993 ES32 Fixing charge for 63A cubical switch LS 550.00

994 ES33 Transportation charge for cubical switch LS 330.00

995 ES34 Fixing charge for 100A cubical switch LS 1100.00

996 ES35 Fixing charge for Wall mounting panel board LS 550.00

997 ES36 Transportation charge for Wall mounting panel board LS 165.00

998 ES37 Fixing charge for C.T metering panel board LS 330.00

999 ES38 Transportation charge for C.T metering panel board LS 330.00

1000 ES39 Fixing charge for m.s angle for power capacitor LS 46.00

1001 ES40 Fabrication M.S angle frame for star delta starter LS 275.00

1002 ES41 Fixing charge for m.s angle for star delta starter LS 165.00

1003 ES42 Laying charge for flat cable metre 7.00

1004 ES421 200A TPNcubical switch DIN no 4950.00

1005 ES43 600 X900 X150 M.S angle frame for meter board LS 825.00

1006 ES44 Water proof ply wood 12mm for meter board LS 330.00

1007 ES45 Fixing charge for meter board LS 198.00

Puducherry Page 120


Sl.No. Code No. Description Unit Rate in Rs.

1008 ES46 Fixing charge for aerial board LS 66.00

1009 ES47 RCC precast ring no 170.00

1010 ES48 RCC cover no 169.00

1011 ES49 Transportation charge for earth pit material LS 110.00

1012 ES50 Fixing charge for earth pit LS 220.00

1013 ES51 Fixing charge for CI adopter LS 39.00

1014 ES52 MS square coupling-50mm dia no 425.00

1015 ES53 MS square coupling-65mm dia no 525.00

1016 ES54 MS square coupling-80mm dia no 650.00

1017 ES55 MS square coupling-100mm dia no 800.00

1018 ES56 welding charge for square coupling-50mm dia no 100.00

1019 ES57 welding charge for square coupling-65mm dia no 200.00

1020 ES58 welding charge for square coupling-80mm dia no 250.00

1021 ES59 welding charge for square coupling-100mm dia no 300.00

1022 ES60 Wall mounting panel board1200X750X225mm no 10450.00

1023 ES61 Wall mounting panel board1300X750X225mm no 13750.00

1024 ES62 Wall mounting panel board1400X900X250mm no 19250.00

1025 ES63 Flush type switch each 12.00

1026 ES64 Supply and fixing of 200mm dia strainer no 7150.00

1027 ES65 Supply and fixing of 300mm dia strainer no 7920.00

1028 ES66 Supply and fixing of 400mm dia strainer no 8800.00

1029 ES67 Providing and fixing of pressure gauge 0-5 kg/cm2 no 2750.00

1030 ES68 Fixing charge for 40 HP oil starter LS 1650.00

1031 ES69 Fixing charge for 50 HP oil starter LS 1980.00

Puducherry Page 121


Sl.No. Code No. Description Unit Rate in Rs.

1032 ES70 Fixing charge for 60 HP oil starter LS 2420.00

1033 ES71 Fixing charge for 75-150 HP oil starter LS 2750.00

1034 ES72 cost of Grouting per point no 116.00

1035 ES73 Drilling charges no 132.00

1036 ES74 cost for salt,bolt nuts,RCC precast ring and cover LS 550.00

1037 EV345 2 HP Vacuum pumpset no 29033.00

1038 EV346 3 HP Vacuum pumpset no 57635.00

1039 EV347 5 HP Coupled pumpset no 150953.00

1040 S8700 Cost of earth above water level Cum 48.00

1041 S8701 Cost of earth work for(second depth) Cum 74.00

1042 S8702 Cost of earth work open timbering(sewer line) Cum 54.00

1043 S8703 Cost of earth work second depth (sewer line) Cum 78.00

1044 S8704 Cost of earth work Third depth (sewer line) Cum 112.00

1045 S8705 Cost of earth work for(Third depth) Cum 106.00

Puducherry Page 122


LEAD
CARRIAGE OF MATERIALS BY MECHANICAL TRANSPORT INCLUDING LOADING, UNLOADING AND STACKING
FOR THE YEAR 2013-2014 (PUDUCHERRY REGION)

Code Materials Unit Incidental Rate Loading Unloading


Charges charge charge
to be 1Km 2Km 3Km 4Km 5Km Beyond Beyond Beyond
adopted 5Km 10Km 20Km
initially upto upto per Km
10 Km 20 Km
per Km per Km

1 2 3 4 4 5 6 7 8 9 10 11 12 13

1.1.1 a) Lime moorum, building


rubbish, earth, manure
or sludge and excavated
rocks:

i) Lime,Moorum,Gravel cum 22.50 57.11 65.44 73.68 81.64 89.39 7.01 5.90 4.95 21.00 21.00
Surki,building rubbish
and brick jelly
ii) Earth cum 12.50 71.39 81.79 92.10 102.05 111.73 8.76 7.37 6.18 24.00 24.00
iii) Manure or Sludge cum 22.50 62.08 71.13 80.09 88.74 97.16 7.62 6.41 5.38 21.00 21.00
iv) Excavated rocks cum 45.00 114.22 130.87 147.36 163.28 178.77 14.02 11.80 9.90 42.00 42.00

a) Sand, stone aggregate


and soling stone

i) Sand cum 15.00 57.11 65.44 73.68 81.64 89.39 7.01 5.90 4.95 24.00 24.00

ii) Stone aggregate


below 40mm nominal
size cum 150.00 57.11 65.44 73.68 81.64 89.39 7.01 5.90 4.95 31.80 31.80
iii) Stone aggregate 40mm
and above cum 150.00 62.08 71.13 80.09 88.74 97.16 7.62 6.41 5.38 31.80 31.80

iv) Soling stone and cum 112.50 67.19 76.98 86.68 96.04 105.16 8.24 6.94 5.82 24.00 24.00
masonary stone
1.1.2 Bricks 1000nos 112.50 152.29 174.49 196.48 217.70 238.36 18.69 15.73 13.19 36.00 36.00
1.1.3 Tiles 1000nos 52.50 91.38 104.70 117.89 130.62 143.02 11.21 9.44 7.92 15.00 15.00

Puducherry Page 123


1 2 3 4 4 5 6 7 8 9 10 11 12 13

1.1.4 Cement,Stone blocks tonne 52.50 50.76 58.16 65.49 72.57 79.45 6.23 5.24 4.40 60.00 60.00
G.I.,C.I.,A.C.,and
CC. pipes below 100mm
dia.,other heavy materials
rice and wheat.
1.1.5 Steel and Iron works tonne 52.50 50.76 58.16 65.49 72.57 79.45 6.23 5.24 4.40 60.00 60.00
1.1.6 Timber cum 22.50 65.27 74.78 84.20 93.30 102.15 8.01 6.74 5.65 21.00 21.00
1.1.7 Tar,Bitumen tonne 112.50 57.11 65.44 73.68 81.64 89.39 7.01 5.90 4.95 45.00 45.00
1.1.7A Solvent qtl 11.25 5.71 6.54 7.37 8.16 8.94 0.70 0.59 0.49 4.50 4.50
1.1.8 Steam coal tonne 22.50 65.27 74.78 84.20 93.30 102.15 8.01 6.74 5.65 21.00 21.00
1.1.9 S.W.pipes-
(a)100mm dia. 100 m 61.25 76.15 87.25 98.24 108.85 119.18 9.34 7.86 6.60 70.00 70.00
(b)150mm dia. 100 m 122.50 152.29 174.49 196.48 217.70 238.36 18.69 15.73 13.19 140.00 140.00
(c)200mm dia. 100 m 204.17 253.82 290.82 327.46 362.83 397.27 31.14 26.21 21.99 233.33 233.33
(d)230mm dia. 100 m 291.67 362.60 415.46 467.80 518.33 567.52 44.49 37.44 31.41 333.33 333.33
(e)250mm dia. 100 m 350.00 435.12 498.55 561.36 622.00 681.03 53.39 44.93 37.70 400.00 400.00
(f)300mm dia. 100 m 437.50 543.90 623.19 701.70 777.50 851.29 66.74 56.17 47.12 500.00 500.00
(g)350mm dia. 100 m 612.50 761.47 872.47 982.38 1088.50 1191.80 93.43 78.63 65.97 700.00 700.00
(h)400mm dia. 100 m 875.00 1087.81 1246.38 1403.40 1555.00 1702.57 133.48 112.33 94.24 1000.00 1000.00
(i)450mm dia. 100 m 1113.64 1384.48 1586.30 1786.15 1979.09 2166.91 169.88 142.97 119.94 1272.73 1272.73
(j)500mm dia. 100 m 1225.00 1522.93 1744.93 1964.77 2177.00 2383.60 186.87 157.27 131.93 1400.00 1400.00
(k)600mm dia. 100 m 1531.25 1903.67 2181.17 2455.96 2721.25 2979.50 233.58 196.58 164.92 1750.00 1750.00
1.1.10 R.C.C.pipes,A.C.pipes
Steel cylinder,R.C.Pipes,
C.I.Pipes and Unrein-
forced cement pipes
(a)100 mm dia 100 m 100.41 124.83 143.03 161.05 178.44 195.38 15.32 12.89 10.81 114.75 114.75
(b)125 mm dia 100 m 134.12 166.74 191.05 215.12 238.36 260.98 20.46 17.22 14.45 153.28 153.28
(c)150 mm dia 100 m 167.35 208.05 238.38 268.41 297.40 325.63 25.53 21.48 18.02 191.26 191.26
(d)200 mm dia 100 m 272.22 338.43 387.76 436.61 483.78 529.69 41.53 34.95 29.32 311.11 311.11
(e)250 mm dia 100 m 386.84 480.93 551.03 620.45 687.47 752.72 59.01 49.66 41.66 442.11 442.11
(f)300 mm dia 100 m 478.14 594.43 681.08 766.89 849.73 930.37 72.94 61.38 51.50 546.45 546.45
(g)350 mm dia 100 m 566.26 703.98 806.59 908.21 1006.32 1101.82 86.38 72.70 60.99 647.15 647.15
(h)400 mm dia 100 m 912.82 1134.82 1300.25 1464.06 1622.21 1776.15 139.24 117.19 98.31 1043.22 1043.22
(i)450,500 mm dia 100 m 1115.66 1387.01 1589.19 1789.40 1982.70 2170.86 170.19 143.23 120.16 1275.05 1275.05
(j)600,700,750 and
800 mm dia. 100 m 1673.50 2080.51 2383.79 2684.11 2974.04 3256.28 255.28 214.85 180.24 1912.57 1912.57
Note:
1. The above rates includes stacking charges.
2. For Code No. 1.1.1 the rates will be applicable to net quantities after deduction of prescribed percentage
for voids mentioned in the C.P.W.D. specification under Sub-Head "Carriage of Materials".
Puducherry Page 124
BUILDING
WORK
2. Earth Work
Page No.: 125
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

2.1.1 Earthwork in surface excavation not sqm 49.48


exceeding 30cm in depth but exceeding 1.5m
in width as well as 10 sqm on plan
including disposal of excavated earth upto
50m and lift upto 1.5m, disposed soil to be
levelled and neatly dressed. - All kinds of
soil.

2.1.1A Earthwork in surface excavation not cum 329.86


excceding 30cm in depth but exceeding 1.5m
in width as well as 10 sqm on plan
including disposal of excavated earth upto
50m and lift upto 1.5m , disposed soil to
be levelled and neatly dressed - all kinds
of soil

2.2.1 Earth work in rough excavation,banking cum 375.34


excavated earth in layers not exceeding
20cm in depth, breaking clods watering,
rolling each layer with 1/2 tonne roller or
wooden or steel rammers, and rolling every
3rd and top-most layer with power roller of
minimum 8 tonnes and dressing up in
embankments for roads, flood banks,
marginal banks and guide banks or filling
up ground depressions, lead upto 50m and
lift upto 1.5m - All kinds of soil.

2.3.1 Banking excavated earth in layers not cum 232.59


exceeding 20 cm, in depth, breaking clods,
watering,rolling each layer with 1/2 tonne
roller, or wooden or steel rammers and
rolling every 3rd and top-most layer with
power roller of minimum 8 tonnes and
dressing up, in embankments for roads,
flood banks, marginal banks, and guide
banks etc., lead upto 50m and lift upto
1.5m - All kinds of soil.

2.4 Deduct for not rolling with power roller of cum 3.81
minimum 8 tonnes for banking excavated
earth in layers not exceeding 20cm in
depth.

2.5 Deduct for not watering the excavated earth cum 13.50
for banking

2.6.1 Earth work in excavation by mechanical cum 223.25


means (Hydraulic excavator) / manual means
over areas (exceeding 30 cm in depth,1.5m
in width as well as 10 sqm on plan)
including disposal of excavated earth ,

Puducherry Region
2. Earth Work
Page No.: 126
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

lead upto 50m and lift upto 1.5m, disposed


earth to be levelled and neatly dressed.-
All kinds of soil.

2.6.1A Earth work in excavation over areas cum 321.18


(exceeding 30cm in depth, 1.5m in width as
well as 10sqm on plan) including disposal
of excavated earth lead upto 50m and lift
upto 1.5m ; disposed earth to be levelled
and neatly dresses - all kinds of soil

2.7.1 Earth work in excavation by mechanical cum 331.72


means (Hydraulic excavator) / manual means
over areas (exceeding 30 cm in depth,1.5m
in width as well as - 10 sqm on plan)
including disposal of excavated earth, lead
upto 50 m and lift upto 1.5m, disposed
earth to be levelled and neatly dressed. -
Ordinary rock

2.7.2 Earth work in excavation by mechanical cum 517.96


means (Hydraulic excavator) / manual means
over areas (exceeding 30 cm in depth,1.5m
in width as well as - 10 sqm on plan)
including disposal of excavated earth, lead
upto 50 m and lift upto 1.5m, disposed
earth to be levelled and neatly dressed. -
Hard rock (requiring blasting)

2.7.3 Earth work in excavation by mechanical cum 732.12


means (Hydraulic excavator) / manual means
over areas (exceeding 30 cm in depth,1.5m
in width as well as - 10 sqm on plan)
including disposal of excavated earth, lead
upto 50 m and lift upto 1.5m, disposed
earth to be levelled and neatly dressed. -
Hard rock (blasting prohibited)

2.8.1 Earth work in excavation by mechanical cum 226.87


means (Hydraulic excavator)/manual means in
foundation trenches or drains (not
exceeding 1.5m in width or 10 sqm on plan)
including dressing of sides and ramming of
bottoms , lift upto 1.5m, including getting
out the excavated soil and disposal of
surplus excavated soil as directed , within
a lead of 50m -All kinds of soil.

2.9.1 Excavation work by mechanical means cum 357.92


(Hydraulic excavator)/manual means in
foundation trenches or drains not exceeding
1.5m in width or 10 sqm on plan including

Puducherry Region
2. Earth Work
Page No.: 127
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

dressing of sides and ramming of bottoms ,


lift upto 1.5m, including getting out the
excavated soil and disposal of surplus
excavated soil as directed , within a lead
of 50m -Ordinary rock.

2.9.2 Excavation work by mechanical means cum 557.50


(Hydraulic excavator)/manual means in
foundation trenches or drains not exceeding
1.5m in width or 10 sqm on plan including
dressing of sides and ramming of bottoms ,
lift upto 1.5m, including getting out the
excavated soil and disposal of surplus
excavated soil as directed , within a lead
of 50m -Hard rock (requiring blasting).

2.9.3 Excavation work by mechanical means cum 750.74


(Hydraulic excavator)/manual means in
foundation trenches or drains (not
exceeding 1.5m in width or 10 sqm on plan)
including dressing of sides and ramming of
bottoms , lift upto 1.5m, including getting
out the excavated soil and disposal of
surplus excavated soil as directed , within
a lead of 50m -Hard rock (blasting
prohibited).

2.10.1.1 Excavating trenches of required width for metre leng 156.87


pipes,cables, etc including excavation for th of pipe
sockets and dressing of sides, ramming of
bottoms,depth upto 1.5 m including getting
out the excavated soil and then returning
the soil as required in layers not
exceeding 20 cm in depth including
consolidating each deposited layer by
ramming, watering , etc.and disposing of
surplus excavated soil as directed ,
within a lead of 50m - All kinds of soil -
Pipes,cables etc, not exceeding 80mm dia .

2.10.1.2 Excavating trenches of required width for metre leng 256.22


pipes,cables, etc including excavation for th of pipe
sockets and dressing of sides, ramming of
bottoms,depth upto 1.5 m including getting
out the excavated soil and then returning
the soil as required in layers not
exceeding 20 cm in depth including
consolidating each deposited layer by
ramming, watering , etc.and disposing of
surplus excavated soil as directed ,
within a lead of 50m - All kinds of soil -
Pipes,cables etc, exceeding 80mm dia but

Puducherry Region
2. Earth Work
Page No.: 128
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

not exceeding 300 mm dia..

2.10.1.3 Excavating trenches of required width for metre leng 400.01


pipes,cables, etc including excavation for th of pipe
sockets and dressing of sides, ramming of
bottoms,depth upto 1.5 m including getting
out the excavated soil and then returning
the soil as required in layers not
exceeding 20 cm in depth including
consolidating each deposited layer by
ramming, watering , etc.and disposing of
surplus excavated soil as directed ,
within a lead of 50m - All kinds of soil -
Pipes,cables etc, exceeding 300 mm dia but
not exceeding 600 mm.

2.11 Extra for excavating trenches for pipes, metre 341.75


cables, etc .in all kinds of soil for depth
exceeding 1.5m,but not exceeding 3m. Rate
is over corresponding basic item for depth
upto 1.5 metre.

2.12 Extra for excavating trenches for pipes, metre 877.38


cables,etc., in all kinds of soil for depth
exceeding 3m in depth, but not exceeding
4.5m (Rate is over corresponding basic item
for depth upto 1.5 metre).

2.13.1.1 Excavating trenches of required width for metre leng 223.08


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20cm in depth including
consolidating each deposited layers by
ramming, watering etc. stacking serviceable
material for measurements and disposal of
unserviceable material as directed, within
a lead of 50 m - Ordinary rock - pipes,
cables, etc. not exceeding 80mm dia.

2.13.1.2 Excavating trenches of required width for metre leng 552.38


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5 m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20 cm in depth including
consolidating each deposited layers by
ramming, watering etc. stacking serviceable
material for measurements and disposal of
unserviceable material as directed, within
a lead of 50m - Ordinary rock - pipes,

Puducherry Region
2. Earth Work
Page No.: 129
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cables, etc., exceeding 80mm dia but not


exceeding 300 mm dia.

2.13.1.3 Excavating trenches of required width for metre leng 635.65


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20cm in depth including
consolidating each deposited layers by
ramming, watering etc., stacking
serviceable material for measurements and
disposal of unserviceable material as
directed, within a lead of 50m - Ordinary
rock - pipes, cables exceeding 300mm dia
but not exceeding 600mm dia.

2.13.2.1 Excavating trenches of required width for metre leng 318.45


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20cm in depth including
consolidating each deposited layers by
ramming, watering etc., stacking
serviceable material for measurements and
disposal of unserviceable material as
directed, within a lead of 50m - Hard rock
(requiring blasting) - pipes, cables, etc.
not exceeding 80mm dia.

2.13.2.2 Excavating trenches of required width for metre leng 788.54


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5 m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20 cm in depth including
consolidating each deposited layers by
ramming, watering etc. stacking serviceable
material for measurements and disposal of
unserviceable material as directed, within
a lead of 50m - Hard rock(requiring
blasting) - pipes, cables, etc., exceeding
80mm dia but not exceeding 300 mm dia.

2.13.2.3 Excavating trenches of required width for metre leng 907.37


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5 m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20 cm in depth including
consolidating each deposited layers by

Puducherry Region
2. Earth Work
Page No.: 130
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

ramming, watering etc. stacking serviceable


material for measurements and disposal of
unserviceable material as directed, within
a lead of 50m - Hard rock(requiring
blasting) - pipes, cables, etc., exceeding
300 mm dia but not exceeding 600 mm dia.

2.13.3.1 Excavating trenches of required width for metre leng 409.76


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5 m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20 cm in depth including
consolidating each deposited layers by
ramming, watering etc. stacking serviceable
material for measurements and disposal of
unserviceable material as directed, within
a lead of 50m - Hard rock (blasting
prohibited) - pipes, cables, etc., not
exceeding 80 mm dia.

2.13.3.2 Excavating trenches of required width for metre leng 1,014.63


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5 m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20 cm in depth including
consolidating each deposited layers by
ramming, watering etc. stacking serviceable
material for measurements and disposal of
unserviceable material as directed, within
a lead of 50m - Hard rock (blasting
prohibited) - pipes, cables, etc.,
exceeding 80 mm dia but not exceeding 300
mm dia.

2.13.3.3 Excavating trenches of required width for metre leng 1,167.59


pipes, cables, etc., including excavation th of pipe
for sockets, depth upto 1.5 m including
getting out the excavated materials,
returning the soil as required in layers
not exceeding 20 cm in depth including
consolidating each deposited layers by
ramming, watering etc. stacking serviceable
material for measurements and disposal of
unserviceable material as directed, within
a lead of 50m - Hard rock (blasting
prohibited) - pipes, cables, etc.,
exceeding 300 mm dia but not exceeding 600
mm dia.

2.14 Extra for excavating trenches for pipes, metre 826.49

Puducherry Region
2. Earth Work
Page No.: 131
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cables, etc., in ordinary / hard rock


exceeding 1.5m depth but not exceeding 3m.
(Rate is over corresponding basic item for
depth upto 1.5m metre).

2.15 Extra for excavating trenches for pipes, metre 2,069.45


cables, etc., in ordinary / hard rock
exceeding 3m depth but not exceeding 4.5m.
(Rate is over corresponding basic item for
depth upto 1.5m metre).

2.16.1 Close timbering in trenches including sqm 84.04


strutting, shoring and packing cavities
(wherever required) complete. (Measurements
to be taken of the face area timbered) -
Depth not exceeding 1.5m.

2.16.2 Close timbering in trenches including sqm 90.15


strutting, shoring and packing cavities
(wherever required) complete. (Measurements
to be taken of the face area timbered) -
Depth exceeding 1.5m but not exceeding 3m.

2.16.3 Close timbering in trenches including sqm 104.19


strutting, shoring and packing cavities
(wherever required) complete. (Measurements
to be taken of the face area timbered) -
Depth exceeding 3 m but not exceeding 4.50
m.

2.17.1 Close timbering in case of shafts, wells, sqm 89.57


cesspits, manholes and the like including
strutting, shoring and packing cavities
(wherever required) etc. complete.
(Measurements to be taken of the face area
timbered). - Depth not exceeding 1.5m.

2.17.2 Close timbering in case of shafts, wells, sqm 102.97


cesspits, manholes and the like including
strutting, shoring and packing cavities
(wherever required) etc. complete.
(Measurements to be taken of the face area
timbered). - Depth exceeding 1.5m but not
exceeding 3 m.

2.17.3 Close timbering in case of shafts, wells, sqm 117.16


cesspits, manholes and the like including
strutting, shoring and packing cavities
(wherever required) etc. complete.
(Measurements to be taken of the face area
timbered). - Depth exceeding 3 m but not
exceeding 4.5 m.

Puducherry Region
2. Earth Work
Page No.: 132
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

2.18.1 Close timbering over areas including sqm 76.59


strutting, shoring and packing cavities
(wherever required) etc. complete.
(Measurements to be taken of the face area
timbered). - Depth not exceeding 1.5m.

2.18.2 Close timbering over areas including sqm 84.01


strutting, shoring and packing cavities
(wherever required) etc. complete.
(Measurements to be taken of the face area
timbered). - Depth exceeding 1.5m but not
exceeding 3m.

2.18.3 Close timbering over areas including sqm 91.95


strutting, shoring and packing cavities
(wherever required) etc. complete.
(Measurements to be taken of the face area
timbered). - Depth exceeding 3m but not
exceeding 4.5 m.

2.19 Extra for planking, strutting and packing sqm 1,065.52


materials for cavities (in close timbering)
if required to be left permanently in
position. (Face area of timber permanently
left to be measured)

2.20.1 Open timbering in trenches including sqm 42.04


strutting and shoring complete
(measurements to be taken of the face area
timbered) Depth not exceeding 1.5m.

2.20.2 Open timbering in trenches including sqm 46.00


strutting and shoring complete
(measurements to be taken of the face area
timbered): Depth exceeding 1.5m but not
exceeding 3 m.

2.20.3 Open timbering in trenches including sqm 52.55


strutting and shoring complete
(measurements to be taken of the face area
timbered): Depth exceeding 3m but not
exceeding 4.5 m.
.

2.21.1 Open timbering in case of shafts, wells, sqm 39.11


cesspits, manholes and the like including
strutting and shoring complete
(Measurements to be taken of the face area
timbered): Depth not exceeding 1.5m.

2.21.2 Open timbering in case of shafts, wells, sqm 45.37


cesspits, manholes and the like including

Puducherry Region
2. Earth Work
Page No.: 133
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

strutting and shoring complete


(Measurements to be taken of the face area
timbered): Depth exceeding 1.5 m but not
exceeding 3 m.

2.21.3 Open timbering in case of shafts, wells, sqm 53.63


cesspits, manholes and the like including
strutting and shoring complete
(Measurements to be taken of the face area
timbered): Depth exceeding 3 m but not
exceeding 4.5 m.

2.22.1 Open timbering over areas including sqm 28.93


strutting , shoring etc., complete
.(Measurements to be taken of the face area
timbered): Depth not exceeding 1.5m.

2.22.2 Open timbering over areas including sqm 33.27


strutting , shoring etc., complete
.(Measurements to be taken of the face area
timbered): Depth exceeding 1.5 m but not
exceeding 3 m.

2.22.3 Open timbering over areas including sqm 40.22


strutting , shoring etc., complete
.(Measurements to be taken of the face area
timbered): Depth exceeding 3 m but not
exceeding 4.5 m.

2.23 Extra for planking and strutting in open sqm 531.02


timbering if required to be left
permanently in position. (Face area of the
timber permanently left to be measured).

2.25 Filling available excavated earth cum 105.13


(excluding rock) in trenches, plinth, sides
of foundations etc. in layers not exceeding
20cm in depth, consolidating each deposited
layer by ramming and watering, lead upto
50m and lift upto 1.5m.

2.26.1 Extra for every additional lift of 1.5m or cum 46.42


part thereof in - All kinds of soil.

2.26.2 Extra for every additional lift of 1.5m or cum 83.19


part thereof in - Ordinary or hard rock.

2.27 Supplying and filling in plinth with sand cum 1,603.96


under floors including, watering, ramming
consolidating and dressing complete.

2.27A.1 Supplying and filling with gravel cum 627.39

Puducherry Region
2. Earth Work
Page No.: 134
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

(excluding rock ) in trenches, plinth,


sides of foundations etc.in layers not
exceeding 20cm in depth consolidating each
deposited layers by ramming and watering
etc.complete including all lead and lift.

2.27B Supplying and filling with red earth cum 567.11


(excluding rock) including cost and
conveyance to the work site and stacking to
the departmental gauge, spreading in layers
not exceeding 20cm in depth, watering and
consolidation using 0.5 tonne roller , or
wooden or steel rammers etc.complete for
making play fields, running tracks and
court yards.

2.27C.1 Supplying and filling with gravel cum 635.58


(excluding rock) in layers not exceeding
20cm in depth, breaking clods, watering,
rolling each layer with 1/2 tonne roller,or
wooden or steel rammers,and rolling every
3rd and top-most layer with power roller of
minimum 8 tonnes capacity including all
leads and lift (payment will be made based
on level measurement)

2.27D.1 Supplying and filling with gravel cum 632.37


(excluding rock) in layers not exceeding
20cm in depth, breaking clods, watering,
rolling each layer with 1/2 tonne roller,
or wooden or steel rammers, including all
leads and lift etc., complete for making
play fields, running trees and courtyards

2.28.1 Surface dressing of the ground including sqm 12.27


removing vegetation and in-equalities not
exceeding 15cm deep and disposal of
rubbish, lead upto 50m and lift upto 1.5m -
All kinds of soil.

2.29.1 Ploughing the existing ground to a depth of sqm 12.30


15cm to 25cm and watering the same - All
kinds of soil.

2.30.1 Excavating holes upto 0.5cum including holes 118.19


getting out the excavated soil, then
returning the soil as required in layers
not exceeding 20cm in depth, including
consolidating each deposited layer by
ramming, watering etc, disposing of
surplus excavated soil; as directed within
a lead of 50m and lift upto 1.5m - All

Puducherry Region
2. Earth Work
Page No.: 135
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

kinds of soil.

2.30.2 Excavating holes upto 0.5cum including holes 181.70


getting out the excavated soil, then
returning the soil as required in layers
not exceeding 20cm in depth, including
consolidating each deposited layer by
ramming, watering etc, disposing of surplus
excavated soil; as directed within a lead
of 50m and lift upto 1.5m - Ordinary rock.

2.30.3 Excavating holes upto 0.5cum including holes 307.14


getting out the excavated soil, then
returning the soil as required in layers
not exceeding 20cm in depth, including
consolidating each deposited layer by
ramming, watering etc, disposing of surplus
excavated soil; as directed within a lead
of 50m and lift upto 1.5m - Hard rock
(requiring blasting).

2.30.4 Excavating holes upto 0.5 cum including holes 403.76


getting out the excavated soil, then
returning the soil as required in layers
not exceeding 20 cm in depth, including
consolidating each deposited layer by
ramming, watering etc, disposing of surplus
excavated soil; as directed within a lead
of 50 m and lift upto 1.5 m - Hard rock
(blasting prohibited).

2.31 Clearing jungle including uprooting of rank sqm 6.34


vegetation, grass, brush wood, trees and
saplings of girth upto 30 cm measured at a
height of 1 m above ground level and
removal of rubbish upto a distance of 50 m
outside the periphery of the area cleared.

2.32 Clearing grass and removal of the rubbish sqm 3.26


upto a distance of 50 m outside the
periphery of the area cleared.

2.33.1 Felling trees of the girth (measured at a tree 194.56


height of 1 m above ground level) including
cutting of trunks and branches removing the
roots and stacking of serviceable material
and disposal of unserviceable material -
Beyond 30 cm girth upto and including 60 cm
girth.

2.33.2 Felling trees of the girth (measured at a tree 861.51


height of 1 m above ground level) including

Puducherry Region
2. Earth Work
Page No.: 136
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cutting of trunks and branches removing the


roots and stacking of serviceable material
and disposal of unserviceable material -
Beyond 60 cm girth upto and including 120
cm girth.

2.33.3 Felling trees of the girth (measured at a tree 3,983.55


height of 1 m above ground level) including
cutting of trunks and branches removing the
roots and stacking of serviceable material
and disposal of unserviceable material -
Beyond 120 cm girth upto and including 240
cm girth.

2.33.4 Felling trees of the girth (measured at a tree 7,989.86


height of 1 m above ground level) including
cutting of trunks and branches removing the
roots and stacking of serviceable material
and disposal of unserviceable material -
Above 240 cm girth.

2.34.1 Supplying chemical emulsion in sealed litres 331.55


containers including delivery as specified
- Chlorpyriphos / Lindane emulsifiable
concentrate of 20%.

2.34.2 Diluting and injecting chemical emulsion sqm 201.48


(to be supplied free cost at site of work)
for PRE-CONSTRUCTIONAL ANTI-TERMITE
treatment and creating a continuous
chemical barrier under and alround the
column pits, wall trenches, basement
excavation, top surface of plinth filling,
junction of wall and floor,along the
external perimeter of building, expansion
joints, over the top surface of
consolidated earth on which apron is to be
laid, surroundings of pipes and conduits
etc. complete as per specifications (plinth
area of the building at ground floor only
shall be measured for payment) -
chlorpyriphos emulsifiable concentrate 20 %
with 1% concentration.

2.35.1.1 Diluting and injecting chemical emulsion metre 15.58


for POST - CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical
emulsion): Along external wall where the
apron is not provided using chemical
emulsion @ 7.5 litres / sqm of the vertical
surface of the substructure to a depth of
300 mm including excavation channel along

Puducherry Region
2. Earth Work
Page No.: 137
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the wall & rodding etc. complete: With


Chlorpyriphos / Lindane E.C. 20% with 1%
concentration.

2.35.2.1 Diluting and injecting chemical emulsion metre 23.00


for POST-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical
emulsion): Along the external wall below
concrete or masonry apron using chemical
emulsion @ 2.25 litres per linear metre
including drilling and plugging holes etc.
- With Chlorpyriphos / Lindane E.C. 20%
with 1% concentration.

2.35.3.1 Diluting and injecting chemical emulsion sqm 126.30


for POST-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical
emulsion): Treatment of soil under existing
floors using chemical emulsion @ one litre
per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with
cement mortar 1:2 (1 cement : 2 coarse
sand) to match the existing floor : With
Chlorpyriphos / Lindane E.C. 20% with 1%
concentration.

2.35.4.1 Diluting and injecting chemical emulsion metre 18.25


for POST-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical
emulsion): Treatment of existing masonry
using chemical emulsion @ one litre per
hole at 300 mm interval including drilling
holes at 45 degree and plugging them with
cement mortar 1:2 (1 cement : 2 coarse
sand) to the full depth of the hole: With
Chlorpyriphos / Lindane E.C. 20% with 1%
concentration.

2.35.5 Diluting and injecting chemical emulsion metre 119.71


for POST-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical
emulsion): Treatment at points of contact
of wood work by chemical emulsion
Chlorpyriphos / Lindane (in oil or kerosene
based solution) @ 0.5 litres per hole by
drilling 6mm dia holes at downward angle of
45 degree at 150 mm centre to centre and
sealing the same.

2.36 Deduct for disposed soil not levelled and cum 32.12
neatly dressed (against item No. 2.6 & 2.7)

Puducherry Region
Puducherry Region
4. Concrete Work
Page No.: 138
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

4.1.1 Providing and laying in position cement cum 7,831.97


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:1:2 (1 cement:1coarse
sand : 2 graded stone aggregate 20mm
nominal size)

4.1.2 Providing and laying in position cement cum 6,097.67


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:11/2:3 (1 cement:1 1/2
coarse sand : 3 graded stone aggregate 20mm
nominal size)

4.1.3 Providing and laying in position cement cum 5,533.67


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2:4 (1 cement:2coarse
sand : 4 graded stone aggregate 20mm
nominal size)

4.1.3.1 Providing and laying in position cement cum 5,726.57


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2:4 (1 cement:2coarse
sand : 4 graded stone aggregate 20mm
nominal size) - (Using cement SRPC)

4.1.4 Providing and laying in position cement cum 5,344.54


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2:4 (1 cement :2coarse
sand : 4 graded stone aggregate 40mm
nominal size)

4.1.5 Providing and laying in position cement cum 4,809.83


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:3:6 (1 cement:3coarse
sand : 6 graded stone aggregate 20mm
nominal size)

4.1.6 Providing and laying in position cement cum 4,594.02


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:3:6 (1 cement:3coarse
sand : 6 graded stone aggregate 40mm
nominal size)

4.1.7 Providing and laying in position cement cum 4,738.52


concrete of specified grade excluding the
cost of centering and shuttering.- All work

Puducherry Region
4. Concrete Work
Page No.: 139
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

upto plinth level -1:3:6 (1 cement:3 fine


sand : 6 graded stone aggregate 40mm
nominal size)

4.1.8 Providing and laying in position cement cum 4,184.11


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:4:8 (1 cement:4coarse
sand : 8 graded stone aggregate 40mm
nominal size)

4.1.9 Providing and laying in position cement cum 4,328.61


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:4:8 (1 cement:4 fine
sand : 8 graded stone aggregate 40mm
nominal size)

4.1.10 Providing and laying in position cement cum 3,856.18


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:5:10 (1 cement:5coarse
sand : 10 graded stone aggregate 40mm
nominal size)

4.1.10A Providing and laying in position cement cum 3,891.14


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:5:10 (1 cement:5coarse
sand : 10 graded stone aggregate 12.5mm
nominal size)

4.1.11 Providing and laying in position cement cum 3,991.08


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:5:10 (1 cement: 5 fine
sand : 10 graded stone aggregate 40mm
nominal size)

4.1.11A Providing and laying in position cement cum 3,540.84


concrete of specified grade excluding the
cost of centring and shuttering - All work
upto plinth level 1:5:10 (1 cement : 5 sand
: 10 graded brick aggregate 40mm nominal
size).

4.1.12 Providing and laying in position cement cum 4,153.26


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2 : 3 1/2 :9 (1
ordinary portland cement :2 Fly ash : 3 1/2
coarse sand : 9 graded stone aggregate

Puducherry Region
4. Concrete Work
Page No.: 140
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

40mm nominal size)

4.1.13 Providing and laying in position cement cum 3,779.35


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2 1/2 :4:11 (1
ordinary portland cement : 2 1/2 Fly ash :
4 coarse sand : 11 graded stone aggregate
40mm nominal size)

4.2.1 Providing and laying cement concrete in cum 8,494.95


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:1:2 (1 cement : 1 coarse sand :
2 graded stone aggregate 20mm nominal size)

4.2.2 Providing and laying cement concrete in cum 6,760.65


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1: 1 1/2 :3 (1 cement : 1 1/2
coarse sand : 3 graded stone aggregate 20mm
nominal size)

4.2.3 Providing and laying cement concrete in cum 6,196.65


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)

4.2.4 Providing and laying cement concrete in cum 6,007.52


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing

Puducherry Region
4. Concrete Work
Page No.: 141
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

courses, parapets, coping bed blocks ,


anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 40mm nominal size)

4.2.5 Providing and laying cement concrete in cum 5,472.81


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 20mm nominal size)

4.2.6 Providing and laying cement concrete in cum 5,257.00


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 40mm nominal size)

4.2.7 Providing and laying cement concrete in cum 5,401.50


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:3:6 (1 cement : 3 fine sand : 6
graded stone aggregate 40mm nominal size)

4.3.1 Centering shuttering including struttings, sqm 271.80


propping etc. and removal of form work for
foundations, footings , bases for columns.-
Using steel sheet with M.S.frames

4.3.2 Centering shuttering including struttings, sqm 444.15


propping etc. and removal of form work for
: Retaining walls , return walls, walls
(any thickness) including attached

Puducherry Region
4. Concrete Work
Page No.: 142
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pilasters, buttresses plinth and string


courses fillets etc.- Using steel sheet
with M.S.frames

4.3.3 Centering shuttering including struttings, sqm 612.55


propping etc. and removal of form work for:
Columns, piers, abutments, pillars, posts
and struts.- Using steel sheet with
M.S.frames

4.4.1 Providing and laying cement concrete in cum 5,533.67


kerbs, steps and the like at or near ground
level excluding the cost of centring,
shuttering and finishing.1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.4.2 Providing and laying cement concrete in cum 4,809.84


kerbs, steps and the like at or near ground
level excluding the cost of centring,
shuttering and finishing. 1:3:6 (1 Cement :
3 coarse sand : 6 graded stone aggregate 20
mm nominal size).

4.5.1 Providing and fixing upto floor five level cum 8,936.18
precast cement concrete string or lacing
courses, copings, bed plates, anchor
blocks, plain windows sills, shelves,
louvers, steps, stair cases etc., including
hoisting and setting in position with
cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) -
1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size).

4.5.2 Providing and fixing upto floor five level cum 8,212.36
precast cement concrete string or lacing
courses, copings, bed plates, anchor
blocks, plain windows sills, shelves,
louvers, steps, stair cases etc., including
hoisting and setting in position with
cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surface complete. - 1:3:6 (1
cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size).

4.6.1 Providing and fixing at or near ground Cum 7,440.53

Puducherry Region
4. Concrete Work
Page No.: 143
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

level precast cement concrete in kerbs,


edgings etc., as per approved pattern and
setting in position with cement mortar 1:3
(1 cement : 3 coarse sand) including the
cost of required centring, shuttering and
finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surface complete. - 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.7.1 Providing and fixing upto floor five level Cum 11,011.38
precast cement concrete solid block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete. 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.7.2 Providing and fixing upto floor five level Cum 10,287.57
precast cement concrete solid block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete. 1:3:6 (1 cement
: 3 coarse sand : 6 graded stone aggregate
20mm nominal size).

4.8.1 Providing and fixing upto floor five level Cum 10,204.40
precast cement concrete hollow block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete: 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.8.2 Providing and fixing upto floor five level Cum 9,871.40
precast cement concrete hollow block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete. 1:3:6 (1 cement

Puducherry Region
4. Concrete Work
Page No.: 144
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

: 3 coarse sand : 6 graded stone aggregate


20mm nominal size).

4.9 Precasting and placing in position 125mm Each 562.62


dia Bollards 600mm high of required shape
including providing M.S. pipe sleeve 50mm
dia 300mm long in the Bollard and M.S.
pipes 40mm dia and 450mm long with
150x150x6mm M.S. plate welded at bottom and
embedded 150mm cement concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size) including
necessary excavation of size 250x250x450mm
deep for the same in bitumen/concrete
pavement at specified spacing.

4.10 Providing and laying damp - proof course sqm 271.43


40mm thick with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size)

4.11 Providing and laying damp - proof course sqm 329.21


50mm thick with cement concrete 1:2:4 (1
cement : 2 coarse sand :4 graded stone
aggregate 20mm nominal size).

4.12 Extra for providing and mixing water per bag of 47.46
proofing material in cement concrete work @ 50kg of c
1kg per 50 kg of cement. ement

4.13 Applying a coat of residual petroleum sqm 131.79


bitumen of penetration 80/100 of approved
quality using 1.7kg per square metre on
damp proof course after cleaning the
surface with brushes and finally with a
piece of cloth lightly soaked in kerosene
oil.

4.14 Extra for concrete work in superstructure cum 542.54


above floor V level for each four floors or
part thereof.

4.15 Extra for laying concrete in or under water cum per m 453.55
and / or liquid mud including cost of depth
pumping or bailing out water and removing
slush etc.complete

4.16 Extra for laying concrete in or under foul cum 175.55


positions.

4.17 Making plinth protection 50mm thick of sqm 399.03


cement concrete 1:3:6 (1 cement : 3 coarse

Puducherry Region
4. Concrete Work
Page No.: 145
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sand : 6 graded stone aggregate 20mm


nominal size) over 75mm bed of dry brick
ballast 40mm nominal size well rammed and
consolidated and grouted with fine sand
including finishing the top smooth.

4.32 Extra providing and laying Ready mix cum 829.48


concrete - in all grade of concrete in PCC
works / RCC works.

Puducherry Region
5. Reinforced Concrete Work
Page No.: 146
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

5.1.1 Providing and laying in position specified cum 8,085.71


grade of reinforced cement concrete
excluding the cost of
centering,shuttering,finishing and
reinforcement -All work upto plinth level :
1:1:2 (1 cement : 1 coarse sand : 2 graded
stone aggregate 20mm nominal size)

5.1.2 Providing and laying in position specified cum 6,351.39


grade of reinforced cement concrete
excluding the cost of
centering,shuttering,finishing and
reinforcement -All work upto plinth level :
1:1.5:3 (1 cement : 1 .5 coarse sand : 3
graded stone aggregate 20mm nominal size)

5.1.3 Providing and laying in position specified cum 5,787.39


grade of reinforced cement concrete
excluding the cost of centering,
shuttering, finishing and reinforcement
-All work upto plinth level : 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size)

5.1.3.1 Providing and laying in position specified cum 5,980.29


grade of reinforced cement concrete
excluding the cost of centering,
shuttering, finishing and reinforcement
-All work upto plinth level : 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) - (Using
cement SRPC)

5.2.1 Reinforced cement concrete work in walls cum 8,877.64


(any thickness), including attached
pilasters , buttresses, plinth and string
courses , fillets, columns , pillars,
piers, abutments, posts and struts etc.upto
floor five level excluding cost of
centering, shuttering,finishing and
reinforcement:1:1:2 (1 cement : 1 coarse
sand : 2 graded stone aggregate 20mm
nominal size)

5.2.2 Reinforced cement concrete work in walls cum 7,143.34


(any thickness), including attached
pilasters , buttresses, plinth and string
courses , fillets, columns , pillars,
piers, abutments, posts and struts etc.upto
floor five level excluding cost of
centering, shuttering,finishing and
reinforcement:1:1.5:3 (1 cement : 1.5coarse

Puducherry Region
5. Reinforced Concrete Work
Page No.: 147
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sand : 3 graded stone aggregate 20mm


nominal size)

5.2.3 Reinforced cement concrete work in walls cum 6,579.34


(any thickness), including attached
pilasters , buttresses, plinth and string
courses , fillets, columns , pillars,
piers, abutments, posts and struts etc.upto
floor five level excluding cost of
centering, shuttering,finishing and
reinforcement:1:2:4(1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm
nominal size)

5.3 Reinforced cement concrete work in beams , cum 6,556.05


suspended floors, roofs having slope upto
15 degree landings, balconies, shelves,
chajjas, lintels, bands, plain window
sills, staircases and spiral stair cases
upto floor five level excluding the cost of
centering, shuttering,finishing and
reinforcement with 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm
nominal size).

5.3.1 Reinforced cement concrete work in beams , cum 7,120.05


suspended floors, roofs having slope upto
15 degree landings, balconies, shelves,
chajjas, lintels, bands, plain window
sills, staircases and spiral stair cases
upto floor five level excluding the cost of
centering, shuttering,finishing and
reinforcement with 1:1.5:3 (1 cement :1.5
coarse sand : 3 graded stone aggregate 20mm
nominal size).

5.4 Providing and laying upto floor five level cum 6,114.06
reinforced cement concrete in kerbs, steps
and the like excluding the cost of
centering, shuttering , finishing and
reinforcement with 1:2:4 (1 cement :2
coarse sand :4 graded stone aggregate 20mm
nominal size)

5.5 Reinforced cement concrete work in arches, cum 6,283.09


arch ribs , domes , vaults, shells , folded
plate and roofs having slope more than 15
degree upto floor five level excluding the
cost of centering, shuttering, finishing
and reinforcement with 1:2:4 (1 cement :2
coarse sand: 4 graded stone aggregate 20mm
nominal size)

Puducherry Region
5. Reinforced Concrete Work
Page No.: 148
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

5.6 Reinforced cement concrete work in cum 6,673.39


chimneys, shafts, upto floor five level
excluding the cost of centering,
shuttering, finishing and reinforcement
with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size)

5.7 Reinforced cement concrete work in well cum 5,562.61


-steining excluding the cost of centring,
shuttering, finishing and reinforcement
with 1:2:4 (1 cement :2 coarse sand : 4
graded stone aggregate 20mm nominal size)

5.8 Reinforced cement concrete work in vertical cum 6,798.98


and horizontal fins individually or forming
box louvers, facias and eaves boards upto
floor five level excluding the cost of
centring, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement :1.5
coarse sand :3 graded stone aggregate 20mm
nominal size)

5.9.1 Centring and shuttering including sqm 271.80


strutting, propping etc.and removal of form
for:Foundations , footings, bases of
columns ,etc. for mass concrete.- Using
steel sheet with M.S.frames

5.9.2 Centring and shuttering including sqm 444.15


strutting, propping etc. and removal of
form for: Walls (any thickness) including
attached pilasters, buttresses, plinth and
string courses etc.- Using steel sheet with
M.S.frames

5.9.3 Centring and shuttering including sqm 437.10


strutting, propping etc. and removal of
form for : suspended floors, roofs,
landings , balconies and access platform -
Using steel sheet with M.S.frames

5.9.4 Centring and shuttering including sqm 437.10


strutting, propping etc. and removal of
form for: Shelves (cast in situ) - Using
steel sheet with M.S.frames

5.9.5 Centring and shuttering including sqm 363.45


strutting, propping etc. and removal of
form for: lintels, beams, plinth beams,
girders, bressumers and cantilevers.- Using
steel sheet with M.S.frames

Puducherry Region
5. Reinforced Concrete Work
Page No.: 149
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

5.9.6 Centring and shuttering including sqm 612.55


strutting, propping etc. and removal of
form for:
columns,pillars,piers,abutments,posts and
struts.- Using steel sheet with M.S.frames

5.9.7 Centring and shuttering including sqm 265.94


strutting, propping etc. and removal of
form for: Stairs (excluding landings)
except spiral - staircases - with water
proof ply 12mm thick , mango / silver wood
scantling and casurina poles

5.9.8 Centring and shuttering including sqm 379.05


strutting, propping etc. and removal of
form for: Spiral staircases(including
landing) - with water proof ply 12mm thick
, mango / silver wood scantling and
casurina poles

5.9.9 Centring and shuttering including sqm 1,006.26


strutting, propping etc. and removal of
form for : arches,domes,vaults upto 6m span
- Using with GS plain sheets , Mango /
silver wood scantling and casurina posts
125mm dia

5.9.10 Centring and shuttering including sqm 298.94


strutting, propping etc. and removal of
form for : extra for arches,domes,vaults
exceeding 6m span - Using with GS plain
sheet , Mango / silver wood scantling and
casurina poles

5.9.11 Centring and shuttering including sqm 444.15


strutting, propping etc. and removal of
form for : Chimneys and shafts. Using steel
panel ,Channel & M.S.tube

5.9.12 Centring and shuttering including sqm 82.62


strutting, propping etc. and removal of
form for : well steining - Using water
proof ply 12mm thick , mango wood in
scantling and casurina posts

5.9.13 Centring and shuttering including sqm 476.05


strutting, propping etc. and removal of
form for : Vertical and horizontal fins
individually or forming box louvers band,
facias and eaves boards - Using water proof
ply 12mm thick , Mango / silver wood
scantling and casurina posts

Puducherry Region
5. Reinforced Concrete Work
Page No.: 150
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

5.9.15 Centring and shuttering including sqm 271.80


strutting, propping etc. and removal of
form for : Small lintels not exceeding 1.5m
clear span, moulding as in cornices, window
sills, string courses, bands, copings, bed
plates, anchor blocks and the like. Using
panel ,angle ,channel and M.S.tube

5.9.16.1 Centring and shuttering including metre 87.48


strutting, propping etc.and removal of form
for: Edges of slabs and breaks in floors
and walls.Under 20 cm wide - Using with
water proof ply 12mm thick , Mango / Silver
wood scantling

5.9.16.2 Centring and shuttering including sqm 324.11


strutting, propping etc.and removal of form
for:Edges of slabs and breaks in floors and
walls.Above 20cm wide - Using with water
proof ply 12mm thick , Mango / Silver wood
scantling

5.9.17 Centring and shuttering including sqm 339.81


strutting, propping etc. and removal of
form for:Cornices and mouldings - Using
with water proof ply 12mm thick , Mango /
Silver wood scantling and Casurina posts

5.9.18 Centring and shuttering including sqm 569.51


strutting, propping etc. and removal of
form for:Small surfaces such as cantilever
ends, brackets and ends of steps,caps and
bases to pilasters and columns and the
like. - Using with water proof ply 12mm
thick ,Mango / silver wood scantling and
Casurina posts

5.9.19 Centring and shuttering including sqm 355.60


strutting, propping etc. and removal of
form for: Weather shade, Chajjas, corbels
etc.,including edges. - Using with water
proof ply 12mm thick ,Mango / silver wood
scantling and Casurina posts

5.9.20 Centring and shuttering including sqm 625.52


strutting, propping etc. and removal of
form for:Suspended floors, roofs, landings,
balconies and access platform, with water
proof ply 12mm thick and telescopic prop

5.9.20A Centring and shuttering including sqm 597.32


strutting, propping etc. and removal of

Puducherry Region
5. Reinforced Concrete Work
Page No.: 151
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

form for:Suspended floors, roofs, landings,


balconies and access platform, with water
proof ply 12mm thick and Casurina posts

5.9.21 Centring and shuttering including sqm 573.77


strutting, propping etc. and removal of
form for: Lintels , beams , plinth beams ,
girders , bressumers and cantilevers, with
water proof ply 12mm thick and telescopic
prop

5.9.21A Centring and shuttering including sqm 524.95


strutting, propping etc. and removal of
form for: Lintels , beams , plinth beams ,
girders , bressumers and cantilevers, with
water proof ply 12mm thick and casurina
posts

5.10.1 Providing and fixing tie bolt, spring coil set 227.74
and plastic cone in wall shuttering
complete as per the Engineer - in - charge
- 12mm dia & 100 mm length

5.10.2 Providing and fixing tie bolt, spring coil set 231.36
and plastic cone in wall shuttering
complete - 12mm dia & 150 mm length.

5.10.3 Providing and fixing tie bolt, spring coil set 314.35
and plastic cone in wall shuttering
complete - 20mm dia & 150mm length.

5.10.4 Providing and fixing tie bolt, spring coil set 362.57
and plastic cone in wall shuttering
complete - 20mm dia & 225 mm length.

5.11.1 Extra for additional height in centring , sqm 259.99


shuttering where ever required with
adequate bracing, propping etc. including
cost of de-shuttering and decentring at all
levels , over a height of 3.5m ,for every
additional height of 1 metre or part
thereof (Plan area to be measured)
Suspended floors, roofs , landing , beams
and balconies (plan area to be measured)

5.12 Providing ,hoisting and fixing upto floor cum 9,107.88


five level precast reinforced cement
concrete work in string courses, bands ,
copings, bed plates, anchor blocks, plain
window sills and the like including the
cost of required centring, shuttering,
finishing smooth with 6 mm thick cement

Puducherry Region
5. Reinforced Concrete Work
Page No.: 152
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

plaster 1:3 (1 cement : 3 fine sand) on


exposed surfaces complete but excluding
cost of reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size)

5.13 Providing , hoisting and fixing upto floor cum 14,556.85


five level precast reinforced cement
concrete in small lintels not exceeding
1.5m clear span upto floor five level
including the cost of required centring,
shuttering and finishing smooth with 6mm
thick cement plaster 1:3 (1 cement : 3 fine
sand) on exposed surfaces but excluding the
cost of reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal -size)

5.14 Providing, hoisting and fixing upto floor cum 16,399.33


five level precast reinforced cement
concrete in mouldings as in cornices,
windows sills etc. including setting in
cement mortar 1:3 (1 cement :3 coarse sand)
cost of required centring, shuttering and
finishing smooth with 6 mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete but excluding the
cost of reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size)

5.15 Providing , hoisting and fixing upto floor cum 9,890.23


five level precast reinforced cement
concrete in lintels , beams and bressumers
including setting in cement mortar 1:3 (1
cement : 3 coarse sand) , cost of required
centring and shuttering and finishing
smooth with 6mm thick cement plaster 1:3 (1
cement : 3 fine sand) on exposed surfaces
but excluding the cost of reinforcement
with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size)

5.16 Providing , hoisting and fixing upto floor cum 13,021.61


five level precast reinforced cement
concrete in shelves including setting in
cement mortar 1:3 (1 cement : 3 coarse
sand) , cost of required centring ,
shuttering and finishing with neat cement
punning on exposed surfaces but excluding
the cost of reinforcement with 1:2:4 (1
cement : 2 coarse sand : 4 graded stone

Puducherry Region
5. Reinforced Concrete Work
Page No.: 153
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

aggregate 12.5mm nominal size).

5.17 Providing , hoisting and fixing upto floor cum 13,439.44


five level precast reinforced cement
concrete in vertical & horizontal fins
individually or forming box louvers setting
in cement mortar 1:2 (1 cement : 2 coarse
sand) including the cost of required
centring , shuttering and finishing smooth
with 6mm thick cement plaster 1:3 (1 cement
: 3 fine sand) on exposed surfaces complete
but excluding the cost of reinforcement
with 1:2:4 (1 cement :2 coarse sand : 4
graded stone aggregate 20 mm nominal size)

5.18.1 Providing precast cement concrete jali sqm 1,035.26


1:2:4 (1cement :2 coarse sand : 4 graded
stone aggregate 6mm nominal size)
reinforced with 1.6 mm dia mild steel wire
including centring and shuttering ,
roughening cleaning , fixing and finishing
in cement mortar 1:3 (1 cement : 3 fine
sand) etc. complete excluding plastering of
the jams , sills and soffits.- 50 mm thick

5.18.2 Providing precast cement concrete jali sqm 899.01


1:2:4 (1 cement :2 coarse sand : 4 graded
stone aggregate 6mm nominal size)
reinforced with 1.6 mm dia mild steel wire
including centring and shuttering ,
roughening cleaning , fixing and finishing
in cement mortar 1:3 (1 cement : 3 fine
sand) etc. complete excluding plastering of
the jambs, sills and soffits - 40mm thick.

5.18.3 Providing precast cement concrete jali sqm 838.11


1:2:4 (1 cement :2 coarse sand : 4 graded
stone aggregate 6mm nominal size)
reinforced with 1.6 mm dia mild steel wire
including centring and shuttering ,
roughening cleaning , fixing and finishing
in cement mortar 1:3 (1 cement : 3 fine
sand) etc. complete excluding plastering of
the jambs , sills and soffits - 25 mm thick

5.19 Encasing rolled steel sections, in beams cum 9,551.91


and columns, with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5 mm nominal size) including
centring and shuttering complete but
excluding cost of reinforcement.

Puducherry Region
5. Reinforced Concrete Work
Page No.: 154
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

5.19.1 Encasing rolled steel sections, in beams cum 9,744.81


and columns, with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5 mm nominal size) including
centring and shuttering complete but
excluding cost of reinforcement - (Using
cement SRPC)

5.20 Encasing rolled steel section in grillages cum 5,963.06


with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5
mm nominal size) including centring and
shuttering but excluding cost of expanded
metal and hangers.

5.21 Extra for providing and fixing expanded sqm 371.93


metal mesh of size 20x60mm and strands
3.25mm wide 1.6mm thick weighing 3.64 kg
per sqm. For encasing of rolled steel
sections in beams , columns and grillages
excluding cost of hangers.

5.22.6 Reinforcement for R.C.C work including kg 72.93


straightening , cutting , bending , placing
in position and binding all complete -
Thermo - Mechanically treated bars (TISCON
/ VIZAG / IISCO /SAIL / JSW) including
placing the M30 grade Athees make cover
block @ 60cm centre to centre

5.22.7 Reinforcement for R.C.C work including Kg 64.07


straightening , cutting , bending , placing
in position and binding all complete -
Thermo - Mechanically treated bars(ISI
BRAND OF APPROVED MAKE) including placing
the M30 grade Athees make cover block @
60cm centre to centre

5.22.8 Providing anticorrosive treatment to hysd tonne 13,189.61


reinforcement with fusion bonded epoxy
coating the rate includes cost of
anticorrosive coating including cost of
powder,sand blasting , cleaning ,
induction, heating, depreciation of
machinery etc, wastage in cut length of
bars, provision of wooden battens between
rows of coated bars, cover to work bush
pins / bar bending machines etc.- for bars
of 20mm to 32mm diameter - conforming to IS
13620 - 1993

5.22.9 Providing anticorrosive treatment to hysd tonne 17,591.21

Puducherry Region
5. Reinforced Concrete Work
Page No.: 155
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

reinforcement with fusion bonded epoxy


coating the rate includes cost of
anticorrosive coating including cost of
powder,sand blasting , cleaning ,
induction, heating, depreciation of
machinery etc, wastage in cut length of
bars, provision of wooden battens between
rows of coated bars, cover to work bush
pins / bar bending machines etc.- for bars
of 8mm to 16mm diameter - conforming to IS
13620 - 1993

5.23 Deduct for omitting in R.C.C. work smooth sqm 142.19


finishing of the exposed surface with 6mm
thick cement mortar 1:3 (1 cement : 3 fine
sand)

5.24 Extra for rendering smooth the top of sqm 111.52


suspended floors , landings and staircases
(treads and risers) with cement mortar 1:2
(1 cement : 2 coarse sand) including a
floating coat of neat cement and protecting
the surface with a layer of 7.5 cm of earth
laid over 15 mm of fine sand in case of
suspended floor and bricks laid in mud
mortar in case of landings and steps
including subsequent removal and cleaning
of the same

5.25 Providing and fixing in position copper kg 252.36


plate as per design for expansion joints

5.26 Providing and filling in position , blown cm depth 725.30


bitumen in expansion joints per cm wid
th per 100
m length

5.27 Providing and filling in position bitumen cm depth p 233.27


mix filler of proportion 80kg of hot er cm widt
bitumen , 1 kg of cement and 0.25 cubic h per 100m
metre of coarse sand for expansion joints length

5.28 Providing and fixing in position 12mm thick cm depth 509.95


bitumen impregnated fibre board conforming per 100m l
to IS : 1838 including cost of primer , ong
sealing compound in expansion joints

5.29.1.1 Providing and fixing sheet covering over metre 127.07


expansion joints with iron screws as per
design to match the colour / shade of wall
treatment - Non - asbestos fibre cement
board 6mm thick as per IS:14862 - 150mm

Puducherry Region
5. Reinforced Concrete Work
Page No.: 156
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

wide

5.29.1.2 Providing and fixing sheet covering over metre 170.78


expansion joints with iron screws as per
design to match the colour / shade of wall
treatment - Non-asbestos fibre cement board
6mm thick as per IS: 14862 -200mm wide.

5.29.2.1 Providing and fixing sheet covering over metre 399.78


expansion joints with iron screws as per
design to match the colour / shade of wall
treatment. Aluminimum fluted strips 3.15mm
thick. 150mm wide.

5.29.2.2 Providing and fixing sheet covering over metre 487.59


expansion joints with iron screws as per
design to match the colour / shade of wall
treatment - Aliminium fluted strips 3.15 mm
thick - 200 mm wide.

5.30 Add or deduct for plaster drip course / metre 34.65


groove in plastered surface or moulding to
R.C.C. projections.

5.31 Extra for laying reinforced cement concrete cum per m 453.55
in or under water and / or liquid mud depth
including cost of pumping or bailing out
water and removing slush etc., complete.

5.32 Extra for laying reinforced cement concrete cum 175.55


in or under foul positions.

5.33 Providing and laying in position machine cum 7,222.74


batched , machine mixed and machine
vibrated design mix cement concrete of
specified grade for reinforced cement
concrete work including pumping of concrete
to site of laying but excluding the cost
of centring , shuttering , finishing and
reinforcement , including admixtures in
recommended proportions as per IS 9103 to
accelerate , retard setting of concrete ,
improve workability without impairing
strength and durability . M-25 grade
reinforced cement concrete by using 410 kg
of cement per cum of concrete - All work
upto floor V level.

5.33.1 Providing and laying in position machine cum 7,469.88


batched , machine mixed and machine
vibrated design mix cement concrete of
specified grade for reinforced cement

Puducherry Region
5. Reinforced Concrete Work
Page No.: 157
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

concrete work including pumping of concrete


to site of laying but excluding the cost
of centring , shuttering , finishing and
reinforcement , including admixtures in
recommended proportions as per IS 9103 to
accelerate , retard setting of concrete ,
improve workability without impairing
strength and durability . M-25 grade
reinforced cement concrete by using 410 kg
of cement per cum of concrete - All work
upto floor V level. (Using cement SRPC)

5.34.1 Add or deduct for providing richer or cum 92.84


leaner mixes respectively at all floor
levels - Providing M-30 grade concrete by
using 420 kg of cement per cum of concrete
instead of M-25 grade B.M.C / RMC.

5.34.2 Add or deduct for providing richer or cum 167.11


leaner mixes respectively at all floor
levels - Providing M-35 grade concrete by
using 428 kg of cement per cum of concrete
instead of M-25 grade B.M.C / RMC.

5.34.2.1 Add or deduct for providing richer or cum 177.95


leaner mixes respectively at all floor
levels - Providing M-35 grade concrete by
using 428 kg of cement per cum of concrete
instead of M-25 grade B.M.C / RMC. (Using
cement SRPC)

5.34.3 Add or deduct for providing richer or cum 232.09


leaner mixes respectively at all floor
levels - Providing M-30 grade concrete by
using 435 kg of cement per cum of concrete
instead of M-25 grade B.M.C / RMC.

5.35 Deduct for using less cement than the quintal 819.83
quantity as provided in the item of batch
mix concrete / RMC as arrived as per mix
design.

5.36 Providing and placing in position precast cum 19,855.34


reinforced cement concrete waffle units
square or rectangular as per design and
shape for floors and roofs in 1: 1 1/2 :3
(1 cement :1 1/2 coarse sand : 3 graded
stone aggregate 10mm nominal size)
including flush or deep ruled pointing at
joints in cement mortar 1:2 (1 cement : 2
fine sand), making necessary holes of
required sizes for carrying through service

Puducherry Region
5. Reinforced Concrete Work
Page No.: 158
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

lines etc., providing steel hooks for


lifting etc, form work in precasting ,
handling , hoisting , centring and erection
complete for all floor levels but excluding
the cost of reinforcement

5.37 Providing and laying in position ready cum 7,729.10


mixed concrete manufactured in fully
automatic batching plant and transported to
site of work in transit mixer for a lead
upto 10kms having continuous agitated
mixer, manufactured as per mix design of
specified grade for reinforced cement
concrete work including pumping of RMC from
transit mixer to site of laying, excluding
the cost of centering, shuttering,
finishing and reinforcement including cost
of admixtures in recommended proportions as
per IS: 9103 to accelerate/ retard setting
of concrete, improve workability without
impairing strength and durability M-25
grade Reinforced cement concrete by using
410kg of cement per cum of concrete. All
works upto floor V level.

5.38 Extra for RCC/BMC/RMC work above floor V cum 132.63


level for each four floors or part therof.

5.39 Extra for carriage of RMC beyond the cum per km 50.63
initial lead of 10 km.

5.50.1 Extra for adding Recron 3S or equivalent 1 cum of c 241.11


12mm fibre as fibre reinforcement in oncrete
concrete at the rate of 909 gm per cum of
concrete including the cost of fibre

5.50.2 Providing and applying decentring chemical sqm 8.44


like setrelease of Don chemical or Reebol
emulsion of Fosroc chemical on the surfaces
of the formwork of any type of centering by
diluting the concentrated chemical in the
proportion of 1 litre of chemical to 5
litres of water and should be thoroughly
stirred and mixed evenly.

Puducherry Region
6. Brick Work
Page No.: 159
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

6.1.1 Brick work with FPS bricks of class cum 4,802.08


designation 35 in foundation and plinth in
cement mortar 1:4 (1 cement : 4 coarse
sand)

6.1.2 Brick work with FPS bricks of class cum 4,535.63


designation 35 in foundation and plinth in
cement mortar 1:6 (1 cement : 6 coarse
sand)

6.2.1 Brick work with modular bricks of class cum 3,906.19


designation 35 in foundation and plinth in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.2.2 Brick work with modular bricks of class cum 3,671.72


designation 35 in foundation and plinth in
cement mortar 1:6 (1 cement: 6 coarse sand)

6.3.1 Brick work with machine moulded perforated cum 5,730.33


bricks of class designation 35 conforming
to IS:2222-1991 in superstructure above
plinth level upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse sand)
with FPS bricks.

6.3.2 Brick work with machine moulded perforated cum 4,859.22


bricks of class designation 35 conforming
to IS:2222-1991 in superstructure above
plinth level upto floor five level in
cement mortar 1:6 (1 cement : 6 coarse
sand) with modular bricks.

6.4.1 Brick work with FPS bricks of class cum 5,550.08


designation 35 in superstructure above
plinth level upto floor V level in all
shapes and sizes in cement mortar 1:4 (1
cement: 4 coarse sand)

6.4.2 Brick work with FPS bricks of class cum 5,283.64


designation 35 in superstructure above
plinth level upto floor V level in all
shapes and sizes in cement mortar 1:6 (1
cement : 6 coarse sand)

6.5 Extra for brick work in superstructure Cum 198.30


above floor V level for each four floors or
part thereof by mechanical means by lifting
material using mobile crane.

6.6 Extra for forming cavity 5cm to 7.5 cm wide sqm 114.55
in cavity walls with necessary weep and
vent holes including use of cores and cost

Puducherry Region
6. Brick Work
Page No.: 160
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of providing and fixing bitumastic coated


MS ties 300mm long of 25x3mm section at not
less than 3 ties per sqm as per approved
design.

6.7 Providing half brick masonry with FPS metre 185.69


bricks of class designation 35 in cement
mortar 1:3 (1 cement : 3 coarse sand) in
superstructure for closing cavity 5 to
7.5cm wide in cavity wall complete with 10
cm / 11.4 cm wide bitumen felt type 3
grade 1.

6.8 Brick work 7 cm thick with FPS brick of sqm 469.94


class designation 35 in cement mortar 1:3
(1 cement : 3 coarse sand) in
superstructure.

6.9 Brick work in plain arches in cum 7,916.24


superstructure including centring and
shuttering complete for span upto 6 metres
with FPS bricks of class designation 35 in
cement mortar 1:3 (1 cement : 3 coarse
sand)

6.10 Brick work in gauged arches in cum 9,654.54


superstructure in cement mortar 1:3 (1
cement :3 coarse sand) including centring
and shuttering complete for span upto 6
metres with FPS bricks of class designation
35

6.11 Extra for additional cost of centring for sqm 298.94


arches exceeding 6 m span including all
shuttering, bolting, wedging and removal
(Area of the soffit to be measured).

6.12.1 Half brick masonry with FPS bricks of class sqm 598.26
designation 35 in foundation and plinth in
cement mortar 1:3 (1 cement : 3 coarse
sand)

6.12.2 Half brick masonry with FPS bricks of class sqm 568.42
designation 35 in foundation and plinth in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.13.1 Half brick masonry with FPS bricks of class sqm 679.82
designation 35 in superstructure above
plinth level upto floor V level in cement
mortar 1:3 (1 cement: 3 coarse sand)

6.13.2 Half brick masonry with FPS bricks of class sqm 649.98

Puducherry Region
6. Brick Work
Page No.: 161
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

designation 35 in superstructure above


plinth level upto floor V level in cement
mortar 1:4 (1 cement: 4 coarse sand)

6.14 Extra for half brick masonry in sqm 17.57


superstructure, above floor V level for
every four floors or part thereof by
mechanical means by lifting material using
mobile crane.

6.15 Extra for providing and placing in position sqm 72.00


2 nos. 6mm dia MS bars at every third
course of half brick masonry (with FPS
bricks).

6.16.1 Tile brick masonry with tile bricks of cum 7,306.14


class designation 35 in foundation and
plinth in cement mortar 1:4 (1 cement : 4
coarse sand).

6.16.2 Tile brick masonry with tile bricks of cum 6,879.82


class designation 35 in foundation and
plinth in cement mortar 1:6 (1 cement : 6
coarse sand)

6.17 Tile brick masonry with machine moulded cum 6,739.31


tile bricks of class designation 35
conforming to IS: 2690(Part I)-1993 in
foundation and plinth in cement mortar 1:6
(1 cement: 6 coarse sand)

6.18 Tile brick masonry with tile brick of class cum 7,702.25
designation 35 in superstructure above
plinth level upto floor V level in cement
mortar 1:6 (1 cement: 6 coarse sand)

6.19 Extra for tile brick masonry with tile cum 542.54
bricks of class designation 35 in
superstructure above floor five level for
every four floors or part thereof.

6.20 Tile brick masonry with tile bricks of cum 10,070.76


class designation 35 in plain arch work in
superstructure in cement mortar 1:4 (1
cement : 4 coarse sand) including centering
and shuttering complete.

6.21 Tile brick masonry with tile bricks of cum 11,786.74


class designation 35 in gauged arch work in
superstructure in cement mortar 1:4 (1
cement: 4 coarse sand) including centring
and shuttering complete.

Puducherry Region
6. Brick Work
Page No.: 162
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

6.22 Tile brick masonry work 5 cm thick with sqm 472.45


tile bricks of class designation 35 in
cement mortar in 1:3 (1 cement: 3 coarse
sand) in superstructure.

6.23 Honey comb brick work 10/11.4 cm thick with sqm 426.57
bricks of class designation 35 in cement
mortar in 1:4 (1 cement :4 coarse sand)

6.24 Extra for laying brick work in or under cum per me 453.55
water and /or liquid mud including cost of ter depth
pumping or bailing out water and removing
slush etc. complete.

6.25 Extra for laying brick work in or under cum 175.55


foul position.

6.26 Brick work with selected FPS bricks of cum 4,636.41


class designation 35 in exposed brick work
including making horizontal and vertical
grooves 10mm wide 12mm deep complete from
ground level upto plinth level in cement
mortar 1:6 (1 cement: 6 coarse sand)

6.27 Brick work with modular bricks of class cum 3,700.52


designation 35 in exposed brick work
including making horizontal and vertical
grooves 10 mm wide 12mm deep complete from
ground level upto plinth level in cement
mortar 1:6 (1 cement: 6 coarse sand)

6.28 Brick work with machine moulded modular cum 4,698.66


bricks of class designation 35 in exposed
brick work including making horizontal and
vertical grooves 10mm wide 12mm deep
complete from ground level upto plinth
level in cement mortar 1:6 (1 cement : 6
coarse sand).

6.29 Brick work with machine moulded FPS bricks cum 4,355.98
of class designation 35 in exposed brick
work including making horizontal and
vertical grooves 10mm wide 12mm deep
complete from ground level upto plinth
level in cement mortar 1:6 (1 cement: 6
coarse sand).

6.30 Brick work with machine moulded perforated cum 4,890.19


FPS bricks of class designation 35
conforming IS:2222-1991 in exposed brick
work including making horizontal and
vertical grooves 10mm wide 12mm deep

Puducherry Region
6. Brick Work
Page No.: 163
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

complete from ground level upto plinth


level in cement mortar 1:6 (1 cement : 6
coarse sand)

6.31 Brick work with machine moulded perforated cum 4,152.62


modular bricks of class designation 35
conforming to IS:2222-1991 in exposed brick
work including making horizontal and
vertical grooves 10mm wide 12mm deep
complete from ground level upto plinth
level in cement mortar 1:6 (1 cement : 6
coarse sand).

6.32.1 Brick work with clay fly-ash FPS brick of cum 4,985.85
class designation 35 in superstructure
above plinth level upto floor five level in
cement mortar 1:4 (1 cement : 4 coarse
sand).

6.32.2 Brick work with clay flyash FPS brick of cum 4,719.36
class designation 35 in superstructure
above plinth level upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse
sand).

6.33 Extra for exposed brick work/clay flyash cum 542.54


brick work in superstructure above floor
five level for each four floors of part
thereof.

6.34.1 Brick work with modular fly ash lime bricks cum 5,184.32
(FALG Bricks) conforming to IS: 12894-2002,
class designation 100 average compressive
strength in superstructure above plinth
level upto floor V level in cement mortar
1:4 (1 cement: 4 coarse sand)

6.34.2 Brick work with modular fly ash lime bricks cum 4,949.86
(FALG Bricks) conforming to IS: 12894-2002,
class designation 100 average compressive
strength in superstructure above plinth
level upto floor V level in cement mortar
1:6 (1 cement: 6 coarse sand)

6.35.1 Brick work with modular calcium silicate cum 5,125.60


bricks machine moulded conforming to IS:
4139-1989,class designation 100 average
compressive strength in superstructure
above plinth level upto floor five level in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.35.2 Brick work with modular calcium silicate cum 4,891.14

Puducherry Region
6. Brick Work
Page No.: 164
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

bricks machine moulded conforming to


IS:4139-1989, class designation 100 average
compressive strength in superstructure
above plinth level upto floor V level in
cement mortar 1:6 (I cement : 6 coarse
sand)

6.36.1 Brick work with modular extruded burnt cum 4,434.62


flyash clay sewer bricks (Conforming to
IS:4885-1988) in foundation and plinth in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.37 Brick work with modular extruded burnt fly cum 7,631.15
ash clay sewer bricks (Conforming to
IS:4885-1988) in arches, in foundation and
plinth in cement mortar 1:3 (1 cement: 3
fine sand)

6.38 Providing and laying autoclaved aerated cum 4,852.31


cement blocks masonry with 100mm thick AAC
blocks in super structure above plinth
level upto floor V level in cement mortar
1:4 (1 cement: 4 coarse sand) The rate
includes providing and placing in position
2 Nos. 6 mm dia M.S. bars at every third
course of masonry work.

6.39 Extra for AAC block masonry in cum 542.54


superstructure above floor V level for
every four floors or part there of.

6.40 Providing and laying Gypsum panel sqm 961.33


partitions 100 mm thick with water proof
Gypsum panels of size 666x500x100mm, made
of calcite phosphor of Gypsum fixed with
tongue and groove, jointed with bonding
plaster as per manufacturers specifications
in superstructure above plinth level upto
floor V level. Gypsum blocks will have a
minimum compressive strength of 9.3 kg/sqcm

6.41 Extra for Gypsum panel partitions in sqm 62.57


superstructure above floor V level for
every four floors or part thereof.

6.42.1 Brick work with mechanised autoclaved cum 4,593.62


flyash lime bricks conforming to IS: 12894:
2002 of class designation 100 in
superstructure above plinth level upto
floor V level in cement mortar 1:4 (1
cement: 4 coarse sand).

Puducherry Region
6. Brick Work
Page No.: 165
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

6.42.2 Brick work with mechanised autoclaved cum 4,330.56


flyash lime bricks conforming to IS:
12894:2002 of class designation 100 in
superstructure above plinth level upto
floor V level in cement mortar 1:6(I
cement: 6 coarse sand)

6.43 Extra for mechanised autoclave flyash lime cum 542.54


bricks conforming to IS:12894-1990 of class
designation 100 in superstructure above
floor V level for each four floors or part
thereof.

6.44 Brick edging 7 cm wide 11.4 cm deep to metre 37.50


plinth protection with bricks of class
designation 35 including grouting with
cement mortar 1:4 (1 cement: 4 fine sand).

6.50.1 Stabilised Mud Blocks work with stabilished cum 4,326.34


Mud Blocks of size 24cm x 11.5cm x 9cm
(manufactured in the ratio of 1:19 (one
cement : 19 red earth) with compressive
strength of not less than 35kg / sq.cm) in
foundation and plinth - in cement mortar
1:4 (1 cement :4 sand)

6.50.2 Stabilised Mud Blocks work with stabilished cum 3,977.66


Mud Blocks of size 24cm x 11.5cm x 9cm
(manufactured in the ratio of 1:19 (one
cement : 19 red earth) with compressive
strength of not less than 35kg / sq.cm) in
foundation and plinth - in cement mortar
1:6 (1 cement :6 sand)

6.50.3 Half Stabilished Mud blocks work with sqm 505.61


Stabilished Mud blocks of size 24cm x
11.5cm x 9cm (manufactured in the ratio of
1:19 (one cement : 19 red earth) with
compressive strength of not less than 35kg
/ sq.cm) in foundation and plinth - in
cement mortar 1:4 (1 cement :4 sand)

Puducherry Region
7. Stone Work
Page No.: 166
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

7.1.1 Random rubble masonry with hard stone in cum 3,771.04


foundation and plinth including levelling
up with cement concrete 1:6:12 (1 cement :
6 coarse sand: 12 graded stone aggregate
20mm nominal size) at plinth level with
cement mortar1:6 (1 cement: 6 coarse sand).

7.2 Extra for random rubble masonry with hard cum 866.65
stone in superstructure above plinth level
and upto floor five level, including
levelling up with cement concrete 1:6:12 (1
cement : 6 coarse sand: 12 graded stone
aggregate 20mm nominal size) at window
sills, ceiling level and the like.

7.3 Extra for random rubble masonry with hard cum 771.61
stone in superstructure above floor V level
for every four floors or part thereof.

7.4.1 Extra for random rubble masonry with hard cum 412.32
stone in square or rectangular pillars.

7.4.2 Extra for random rubble masonry with hard cum 1,176.70
stone in circular pillars.

7.5 Extra for random rubble masonry with hard cum 434.64
stone curved on plan for a mean radius not
exceeding 6 m.

7.6.1 Coursed rubble masonry (first sort) with cum 4,409.29


hard stone in foundation and plinth with
cement mortar 1:6 (1 cement : 6 coarse
sand).

7.7.1 Coursed rubble masonry (second sort) with cum 4,107.89


hard stone in foundation and plinth with
cement mortar 1:6 (1 cement : 6 coarse
sand).

7.8 Extra for coursed rubble masonry with hard cum 838.25
stone (first or second sort) in
superstructure above plinth level and upto
floor five level.

7.9 Extra for coursed rubble masonry with hard cum 771.61
stone (first or second sort) in
superstructure above floor five level for
every four floors or part thereof.

7.10.1 Extra for coursed rubble masonry with hard cum 461.16
stone (first or second sort) in square or
rectangular pillars.

Puducherry Region
7. Stone Work
Page No.: 167
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

7.10.2 Extra for coursed rubble masonry with hard cum 1,341.27
stone (first or second sort) in circular
pillars.

7.11 Extra for coursed rubble masonry with hard cum 476.84
stone (first or second sort) curved on plan
for a mean radius not exceeding 6 metre.

7.12.1.1 Stone work in plain ashlar in cum 25,426.00


superstructure upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse sand)
including pointing with cement mortar 1:2
(1 white cement: 2 stone dust) with an
admixture of pigment matching the stone
shade one face dressed - Red sand stone.

7.12.1.2 Stone work in plain ashlar in cum 26,390.00


superstructure upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse sand)
including pointing with cement mortar 1:2
(1 white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade one face dressed - White sand stone.

7.12.2.1 Stone work in plain ashlar in cum 34,556.00


superstructure upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse sand)
including pointing with cement mortar 1:2
(1 white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade both face dressed - Red sand stone.

7.12.2.2 Stone work in plain ashlar in super cum 35,521.00


structure upto floor five level in cement
mortar 1:6 (1 cement: 6 coarse sand)
including pointing with cement mortar 1:2
(1white cement : 2stone dust) with an
admixture of pigment matching the stone
shade - Both face dressed - White sand
stone.

7.13.1 Stone work plain ashlar in arches in cement cum 29,437.00


mortar 1:3 (1 cement:3 coarse sand)
including centring, shuttering and pointing
with white cement mortar 1:2 (1 white
cement: 2 stone dust) with an admixture of
pigment matching the stone shade - Red sand
stone.

7.13.2 Stone work plain ashlar in arches in cement cum 30,401.00


mortar 1:3 (1 cement: 3 coarse sand) i/c

Puducherry Region
7. Stone Work
Page No.: 168
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

centring and shuttering and pointing with


white cement mortar 1:2 (1 white cement: 2
stone dust) with an admixture of pigment
matching the stone shade - white sand
stone.

7.14.1 Stone work plain ashlar in domes in cement cum 51,084.00


mortar 1:3 (1 cement: 3 coarse sand)
including centring, shuttering and pointing
with white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment matching the stone shade - Red sand
stone.

7.14.2 Stone work plain ashlar in domes in cement cum 52,048.00


mortar 1:3 (1 cement : 3 coarse sand)
including centring, shuttering and pointing
with white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment matching the stone shade - white
sand stone.

7.15.1.1 Stone work ashlar punched (ordinary) in cum 23,852.00


superstructure upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse sand)
including pointing with cement mortar 1:2
(1 white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade. Red sand stone - one faced punched.

7.15.1.2 Stone work ashlar punched (ordinary) in cum 31,410.00


superstructure upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse sand)
including pointing with cement mortar 1:2
(1 white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade - Red sand stone - Double faced
punched.

7.15.2.1 Stone work ashlar punched (ordinary) in cum 24,818.00


superstructure upto floor five level in
cement mortar 1:6 (1 cement : 6 coarse
sand) including pointing with cement
mortar 1:2 (1 white cement : 2 stone dust)
with an admixture of pigment matching the
stone shade - White sand stone - Single
face punched.

7.15.2.2 Stone work ashlar punched (ordinary) in cum 32,374.00


superstructure upto floor five level in
cement mortar 1:6 (1 cement : 6 coarse
sand) including pointing with cement mortar

Puducherry Region
7. Stone Work
Page No.: 169
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

1:2 (1 white cement : 2 stone dust) with an


admixture of pigment matching the stone
shade - White sand stone - Double faced
punched.

7.16 Extra for stone work, plain ashlar or cum 771.00


ashlar punched above floor five level for
every four floors or part thereof.

7.17.1 Extra for plain ashlar or ashlar punched in cum 1,893.00


square or rectangular pillars.

7.18 Extra for stone work, plain ashlar or cum 1,316.00


ashlar punched curved on plan with a mean
radius not exceeding 6m.

7.19 Extra for additional cost of centring for sqm 298.94


arches exceeding 6m span including all
strutting, bolting, wedging etc., and
removal (area of soffit to be measured).

7.20.1 Stone work sunk or moulded or sunk and cum 38,140.00


moulded upto floor five level in cement
mortar 1:6 (1 cement: 6 coarse sand)
including pointing with white cement mortar
1:2 (1 white cement : 2 stone dust) with
an admixture of pigment matching the stone
shade - Red sand stone .

7.20.2 Stone work sunk or moulded or sunk and cum 39,105.00


moulded upto floor five level in cement
mortar 1:6 (1 cement: 6 coarse sand)
including pointing with white cement mortar
1:2 (1 white cement : 2 stone dust) with
an admixture of pigment matching the stone
shade - White sand stone .

7.21.1 Extra for stone work sunk or moulded or cum 2,468.00


sunk and moulded or carved in triangular or
square or rectangular pillars

7.21.2 Extra for stone work sunk or moulded or cum 6,994.00


sunk and moulded or carved in circular or
polygonal pillars.

7.22 Extra for stone work sunk or moulded in per metre 124.58
cornices. per cm gir
th

7.23.1.1 Stone work (machine cut edges) for wall sqm 2,455.17
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar

Puducherry Region
7. Stone Work
Page No.: 170
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

1:3 (1 cement: 3 coarse sand) including


pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade (to be secured to the backing by
means of cramps which shall be paid for
separately) Red sand stone - exposed face
fine dressed with rough backing 70mm thick.

7.23.1.2 Stone work (machine cut edges) for wall sqm 2,373.44
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
fine dressed with rough backing - 60mm
thick.

7.23.1.3 Stone work (machine cut edges) for wall sqm 2,289.17
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
fine dressed with rough backing - 50mm
thick.

7.23.1.4 Stone work (machine cut edges) for wall sqm 2,226.09
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
fine dressed with rough backing - 40mm
thick.

7.23.1.5 Stone work (machine cut edges) for wall sqm 2,144.30
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including

Puducherry Region
7. Stone Work
Page No.: 171
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pointing in white cement mortar 1:2 (1


white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
fine dressed with rough backing - 30mm
thick.

7.23.2.1 Stone work (machine cut edges) for wall sqm 3,401.91
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 70mm thick.

7.23.2.2 Stone work (machine cut edges) for wall sqm 3,333.67
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 60mm thick.

7.23.2.3 Stone work (machine cut edges) for wall sqm 3,246.71
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 50mm thick.

7.23.2.4 Stone work (machine cut edges) for wall sqm 3,170.14
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including

Puducherry Region
7. Stone Work
Page No.: 172
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pointing in white cement mortar 1:2 (1


white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 40mm thick.

7.23.2.5 Stone work (machine cut edges) for wall sqm 3,093.74
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 30mm thick.

7.23.3.1 Stone work (machine cut edges) for wall sqm 2,522.68
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 70mm
thick.

7.23.3.2 Stone work (machine cut edges) for wall sqm 2,436.71
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 60mm
thick.

7.23.3.3 Stone work (machine cut edges) for wall sqm 2,350.92
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including

Puducherry Region
7. Stone Work
Page No.: 173
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pointing in white cement mortar 1:2 (1


white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 50mm
thick.

7.23.3.4 Stone work (machine cut edges) for wall sqm 2,264.48
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 40mm
thick.

7.23.3.5 Stone work (machine cut edges) for wall sqm 2,178.64
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 30mm
thick.

7.23.4.1 Stone work (machine cut edges) for wall sqm 3,477.52
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 70mm thick.

7.23.4.2 Stone work (machine cut edges) for wall sqm 3,391.54
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including

Puducherry Region
7. Stone Work
Page No.: 174
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pointing in white cement mortar 1:2 (1


white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 60mm thick.

7.23.4.3 Stone work (machine cut edges) for wall sqm 3,305.76
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 50mm thick.

7.23.4.4 Stone work (machine cut edges) for wall sqm 3,219.33
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 40 mm thick.

7.23.4.5 Stone work (machine cut edges) for wall sqm 3,133.47
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 30mm thick.

7.24 Extra for stone work (veneer work) curved cum 1,893.00
on plan with a mean radius not exceeding 6
m.

Puducherry Region
7. Stone Work
Page No.: 175
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

7.25 Providing and fixing stainless steel cramps kg 700.62


of required size and shape for anchoring
stone wall lining to the backing or
securing adjacent stones in stone wall
lining in cement mortar 1:2 (1 cement: 2
coarse sand) including making the necessary
chases in stone and holes in walls wherever
required.

7.26 Providing and fixing stone dowels 10x5x2.50 each 37.87


cm cut to double wedge shape as per design
in cement mortar 1:2 (1 cement: 2 coarse
sand) including making the necessary
chases.

7.27 Providing and fixing copper pins 7.5cm long each 34.22
6 mm diameter for securing adjacent stones
in stone wall lining in cement mortar 1:2
(1 cement: 2 coarse sand) including making
the necessary chases.

7.28.1.1 Providing and fixing sloping chajja of sqm 1,343.63


stone 40mm thick and upto 80cm wide beyond
the wall as measured along the slope in
cement mortar 1:4 (1 cement : 4 coarse
sand) with 12mm diameter anchoring steel
bar 45cm long fixed in each stone and
supported on and including with bricks cove
of class designation 75 in cement mortar
1:4 (1 cement: 4 coarse sand) including
pointing in cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment matching the stone shade - Red sand
stone with FPS bricks.

7.28.2.1 Providing and fixing sloping chajja of sqm 1,522.92


stone 40mm thick and upto 80cm wide beyond
the wall as measured along the slope in
cement mortar 1:4 (1 cement : 4 coarse
sand) with 12mm diameter anchoring steel
bar 45cm long fixed in each stone and
supported on and including with bricks cove
of class designation 75 in cement mortar
1:4 (1 cement: 4 coarse sand) including
pointing in cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment matching the stone shade - White
sand stone with FPS bricks.

7.29.1 Providing and fixing horizontal chajja of sqm 834.69


stone 40mm thick and upto 80cm projection
in cement mortar 1:4 (1 cement: 4 coarse

Puducherry Region
7. Stone Work
Page No.: 176
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sand) including pointing in white cement


mortar 1:2 (1 white cement : 2 stone dust)
with an admixture of pigment matching the
stone shade - Red sand stone.

7.29.2 Providing and fixing horizontal chajja of sqm 986.60


stone 40mm thick and upto 80cm projection
in cement mortar 1:4 (1 cement : 4 coarse
sand) including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust)
with an admixture of pigment matching the
stone shade - white sand stone.

7.30 30 mm red sand stone sun-shade sqm 937.24


(chisel-dressed) supported on red sand
stone brackets, fixed in walls with cement
mortar 1:4 (1 cement: 4 coarse sand)
including finishing complete.

7.31 Providing and fixing red sand stone each 3,000.71


brackets 55 x 22.5 x 45 cm sunk and moulded
including providing and fixing with 4 nos.
gun metal cramp 25 x 6 mm 30 cm long and
dowel bars 7.5 cm long 6mm dia as per
design.

7.32.1 Stone work, plain in copings, cornices, cum 36,720.00


string courses and plinth courses upto
75mm thick in cement mortar 1:6 (1 cement:
6 coarse sand) including pointing with
white cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment
matching the stone shade - Red sand stone.

7.32.2 Stone work, plain in copings, cornices, cum 37,682.96


string courses and plinth courses, upto
75mm thick in cement mortar 1:6 (1 cement:
6 coarse sand) including pointing with
white cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment
matching the stone shade - White sand
stone.

7.33.1 Providing and fixing stone jali 40 mm thick sqm 10,552.68


throughout in cement mortar 1:3 (1 cement:
3 coarse sand) including pointing in white
cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment,
matching the stone shade, jali slab without
any chamfers etc. - Red sand stone.

7.33.2 Providing and fixing stone jali 40mm thick sqm 10,691.92

Puducherry Region
7. Stone Work
Page No.: 177
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

throughout in cement mortar 1:3 (1 cement:


3 coarse sand) including pointing in white
cement mortar 1:2 (1 white cement : 2 stone
dust with an admixture of pigment, matching
the stone shade, jali slab without any
chamfers etc. - White sand stone.

7.34 Extra for laying stone work in or under cum per me 453.55
water and / or liquid mud including cost of tre depth
pumping or bailing out water and removing
slush etc. complete.

7.35 Extra for laying stone work in or under cum 175.55


foul position.

7.36 Wall lining butch work upto 10.00 m height sqm 1,622.03
with Dholpur stone 40mm thick rough facing
on the exposed surface with stone strips of
minimum length 300mm and required width
including embedding every 10th layer and
bottom most layer in masonry or concrete
after making necessary chases of size 75 x
75 mm and by providing layer of 75mm thick
strips i/c 12mm thick bed of cement mortar
1:3 (1 cement: 3 coarse sand) i/c ruled
pointing in cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment to match the shade of stone
complete.

7.37.1.1 Stone work (machine cut edges) for wall sqm 2,018.24
lining upto 10m height etc. (Veneer work)
backing filled with a grout of 12mm thick
cement mortar 1:3 (1 cement: 3 coarse sand)
and jointed with cement mortar 1:2 (1
cement : 2 stone dust) including rubbing
and polishing complete. (To be secured to
the backing by means of cramps which shall
be paid for separately) - Kota staone slabs
exposed face dressed and rubbed 25mm thick.

7.38.1.1 Stone tile work for wall lining upto 10m sqm 1,759.54
height with special adhesive over 12mm
thick bed of cement mortar 1:3 (1 cement: 3
coarse sand) including pointing in white
cement with an admixture of pigment to
match the stone shade 8mm thick (Mirror
polished and machine cut edge) - Granite
stone of any colour and shade.

7.38.1.2 Stone tile work for wall lining upto 10 m sqm 1,425.88
height with special adhesive over 12mm

Puducherry Region
7. Stone Work
Page No.: 178
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

thick bed of cement mortar 1:3 (1 cement: 3


coarse sand) including pointing in white
cement with an admixture of pigment to
match the stone shade. 8mm thick - (mirror
polished and machine cut edge) - Raj Nagar
plain white marble/Udaipur green
marble/Zebra black marble.

7.39 Extra for stone work for wall lining on sqm 124.16
exterior walls of height more than 10m from
ground level for every additional height of
3m or part there of.

7.40.1 Providing and fixing dry cladding upto 10 sqm 2,483.48


metre heights with 30mm thick gang saw cut
stone with (machine cut edges) of uniform
colour and size upto 1m x 1m, fixed to
structural steel frame work and/or with the
help of cramps, pins etc. and sealing the
joints with approved weather sealant as per
architectural drawing. (The steel frame
work, stainless steel cramps and pins etc.
shall be paid for separately) - Red sand
stone.

7.40.2 Providing and fixing dry cladding upto 10 sqm 2,551.65


metre heights with 30mm thick gang saw cut
stone with (machine cut edges) of uniform
colour and size upto 1m x 1m, fixed to
structural steel frame work and/or with the
help of cramps, pins etc. and sealing the
joints with approved weather sealant as per
architectural drawing. (The steel frame
work, stainless steel cramps and pins etc.
shall be paid for separately) - White sand
stone.

7.41 Providing and fixing structural steel frame kg 136.01


(for dry cladding with 30 mm thick gang saw
cut with machine cut edges sand stone) on
walls at all heights using M.S.
square/rectangular tube in the required
pattern as per architectural drawing
including cost of cutting, bending, welding
etc. The frame work shall be supported in
wall with the help of MS brackets/ lugs of
angle iron/flats etc. which shall be welded
to the frame and embedded in brick wall
with cement concrete block 1:2:4 (1 cement
:2 coarse sand: 4 graded stone aggregate
20mm nominal size) of size 300x230x300mm
including cost of necessary centring and

Puducherry Region
7. Stone Work
Page No.: 179
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

shuttering and with approved expansion hold


fasteners on CC/RCC surface including
drilling necessary holes. Approved cramps/
pins etc. shall be welded to the frame work
to support stone cladding the steel work
will be given a priming coat of "ZINC"
primer and painted with two or more coats
of epoxy paint (Shop drawings shall be
submitted by the contractor to the
Engineer-in-Charge for approval before
execution). The frame work shall be fixed
in true horizontal & vertical lines/planes.
(Only structural steel frame work shall be
measured for the purpose of payment,
stainless steel cramps shall be paid for
separately and nothing extra shall be
paid.)

7.42 Providing and fixing adjustable stainless nos. 405.07


steel cramps of approved quality and of
required shape and size adjustable with
stainless steel nuts, bolts and washer
(total weight not less than 260gms) for dry
stone cladding fixed on frame work at
suitable location including making
necessary recesses in stone slab, drilling
required holes etc., complete.

Puducherry Region
8. Marble Work
Page No.: 180
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

8.1.1.1 Marble work gang saw cut (polished and sqm 3,336.78
machine cut) of thickness 18 mm for wall
lining (veneer work) in cement mortar 1:3
(1 cement: 3 coarse sand) including
pointing with white cement mortar 1:2 (1
white cement : 2 marble dust) with an
admixture of pigment to match the marble
shade: (To be secured to the backing by
means of cramps, which shall be paid for
separately) - Raj Nagar plain white marble/
Udaipur green marble/ Zebra black marble -
Area of slab upto 0.50 sqm.

8.1.1.2 Marble work gang saw cut (polished and sqm 3,305.86
machine cut) of thickness 18 mm for wall
lining (veneer work) in cement mortar 1:3
(1 cement: 3 coarse sand) including
pointing with white cement mortar 1:2 (1
white cement : 2 marble dust) with an
admixture of pigment to match the marble
shade: (To be secured to the backing by
means of cramps,which shall be paid for
separately) - Raj Nagar plain white marble/
Udaipur green marble/ Zebra black marble -
Area of slab over 0.50 sqm.

8.2.1.1 Providing and fixing 18mm thick gang saw sqm 3,023.94
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Raj Nagar
plain white marble / Udaipur green marble /
Zebra black marble - Area of slab upto 0.5
sqm

8.2.1.2 Providing and fixing 18mm thick gang saw sqm 3,023.95
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints
treated with white cement, mixed with

Puducherry Region
8. Marble Work
Page No.: 181
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

matching pigment, epoxy touch ups,


including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Raj Nagar
plain white marble / Udaipur green marble /
Zebra black marble - Area of slab over 0.5
sqm

8.2.2.1 Providing and fixing 18mm thick gang saw sqm 3,720.22
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Granite of
any colour and shade - Area of slab upto
0.5 sqm

8.2.2.2 Providing and fixing 18mm thick gang saw sqm 3,786.51
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Granite of
any colour and shade - Area of slab over
0.50 sqm

8.3.1 Extra for providing edge moulding to 18mm metre 169.57


thick marble stone counters, vanities,
etc., including machine polishing to edge
to give high gloss finish etc., complete. -
Marble work.

8.3.2 Extra for providing edge moulding to 18mm metre 189.86


thick marble stone counters, vanities,
etc., including machine polishing to edge
to give high gloss finish etc., complete. -
Granite work.

Puducherry Region
8. Marble Work
Page No.: 182
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

8.4 Extra for fixing marble / granite stone metre 276.95


over and above corresponding basic item in
facias and drops of width upto 150 mm with
epoxy resin based adhesive including
cleaning etc. complete.

8.5 Extra for providing opening of required No 475.96


size and shape for wash basins/kitchen sink
in kitchen platform, vanity counters and
similar locations in marble / granite /
stones work including necessary holes for
pillar taps etc. including rubbing and
polishing of cut edges etc. complete.

8.6 Mirror polishing on marble work / granite sqm 196.97


work / stone work wherever required to give
high gloss finish complete.

8.7.1 Providing and fixing cramps of required kg 665.61


size and shape in RCC / CC backing with
cement mortar 1:2 (1 cement: 2 coarse sand)
including drilling necessary holes in
stones and embedding the cramp in the hole
(fastener to be paid separately) - Gunmetal
cramps.

8.7.2 Providing and fixing cramps of required kg 700.62


size and shape in RCC / CC backing with
cement mortar 1:2 (1 cement: 2 coarse sand)
including drilling necessary hole in stones
and embedding the cramp in the hole
(fastener to be paid separately) -
Stainless steel cramps.

8.8.1.1 Providing and fixing expansion hold nos. 24.88


fasteners on CC/RCC surface backing
including drilling necessary holes and the
cost of bolt etc. complete. - Wedge
expansion type - Fastener with threaded dia
6mm.

8.8.1.2 Providing and fixing expansion hold nos. 27.66


fasteners on CC/RCC surface backing
including drilling necessary holes and the
cost of bolt etc. complete. - Wedge
expansion type - Fastener with threaded dia
10mm.

8.8.1.3 Providing and fixing expansion hold nos. 42.49


fasteners on CC/RCC surface backing
including drilling necessary holes and the
cost of bolt etc. complete. - Wedge

Puducherry Region
8. Marble Work
Page No.: 183
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

expansion type - Fastener with threaded dia


12mm.

8.9.1.1 Stone tile (polished) work for wall lining sqm 1,709.29
over 12mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand) and cement slurry @
3.3kg/sqm including pointing in white
cement complete. - 8mm thick Raj Nagar
plain white marble/Udaipur green
marble/Zebra black marble.

8.9.1.2 Stone tile (polished) work for wall lining sqm 1,993.51
over 12mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand) and cement slurry @
3.3kg/sqm including pointing in white
cement complete. - 8mm thick - Granite of
any colour and shade.

8.10.1 Providing and fixing 18mm thick stone slab sqm 1,918.00
table rubbed, edges rounded and polished of
size 75x50 cm deep and 1.8cm thick fixed in
urinal partitions by cutting a chase of
appropriate width with chase cutter and
embedding the stone in the chase with epoxy
grout or with cement concrete 1:2:4 (1
cement : 2 coarse sand: 4 graded stone
aggregate 6 mm nominal size) and finished
smooth. - White Agaria marble stone.

8.10.2 Providing and fixing 18mm thick stone slab sqm 3,270.69
table rubbed, edges rounded and polished of
size 75x50 cm deep and 1.8cm thick fixed in
urinal partitions by cutting a chase of
appropriate width with chase cutter and
embedding the stone in the chase with epoxy
grout or with cement concrete 1:2:4 (1
cement : 2 coarse sand: 4 graded stone
aggregate 6 mm nominal size) and finished
smooth. - Granite stone of approved shade.

Puducherry Region
9. Wood Work
Page No.: 184
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.1.1B Providing wood work in frames of doors, cum 2,14,613.33


windows,clerestory windows and other
frames, wrought framed and fixed in
position - Burma teak wood .

9.1.2P Providing wood work in frames of doors, Cum 1,20,147.22


windows,clerestory windows and other
frames, wrought framed and fixed in
position - Padak wood

9.1.2V Providing wood work in frames of doors, cum 1,11,162.22


windows,clerestory windows and other
frames, wrought framed and fixed in
position - Vengai wood

9.1.3P Providing wood work in frames of doors, cum 1,21,427.50


windows,clerestory windows and other
frames, wrought framed and fixed in
position - Kiln seaoned Padak wood

9.1.3V Providing wood work in frames of doors, Cum 1,12,442.78


windows,clerestory windows and other
frames, wrought framed and fixed in
position - Killn seasoned Vengai wood

9.3.1B Providing wood work in frames of false cum 2,07,938.80


ceiling, partitions etc.sawn and put up in
position - Burma Teak wood

9.3.1P Providing wood work in frames of false Cum 1,13,969.56


ceiling , partitions , etc. sawn and put up
in position - Padak wood

9.3.1V Providing wood work in frames of false cum 1,05,032.15


ceiling , partitions , etc. sawn and put up
in position - Vengai wood

9.3.2P Providing wood work in frames of false Cum 1,15,028.48


ceiling , partitions etc . Sawn and put up
in position : - Kiln seasoned Padak wood

9.3.2V Providing wood work in frames of false cum 1,06,085.70


ceiling , partitions etc . Sawn and put up
in position : - Kiln seasoned Vengai wood

9.4.1B Extra for additional labour for circular Cum 21,461.39


works , such as in frames of fan light : -
Burma teak wood.

9.4.2P Extra for additional labour for circular cum 12,014.72


works , such as in frames of fan light : -
Padak wood

Puducherry Region
9. Wood Work
Page No.: 185
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.4.2V Extra for additional labour for circular cum 11,116.39


works , such as in frames of fan light : -
Vengai wood

9.5.1.1B Providing and fixing panelled or panelled sqm 6,150.82


and glazed shutters for doors , windows and
clerestory windows including ISI marked
black enamelled M.S butt hinges with
necessary screws excluding panelling which
will be paid for separately. - Burma Teak
wood - 35mm thick shutters.

9.5.1.1P Providing and fixing panelled or panelled sqm 3,735.15


and glazed shutters for doors , windows and
clerestory windows including ISI marked
black enamelled M.S butt hinges with
necessary screws excluding panelling which
will be paid for separately. - Padak wood
- 35mm thick shutters.

9.5.1.1V Providing and fixing panelled or panelled sqm 3,735.15


and glazed shutters for doors , windows and
clerestory windows including ISI marked
black enamelled M.S butt hinges with
necessary screws excluding panelling which
will be paid for separately. - Vengai wood
- 35mm thick shutters.

9.5.1.2B Providing and fixing panelled or panelled sqm 5,405.10


and glazed shutters for doors , windows and
clerestory windows including ISI marked
black enamelled M.S butt hinges with
necessary screws excluding panelling which
will be paid for separately. - Burma teak
wood - 30mm thick shutters

9.5.1.2P Providing and fixing panelled or panelled sqm 3,321.00


and glazed shutters for doors , windows and
clerestory windows including ISI marked
black enamelled M.S butt hinges with
necessary screws excluding panelling which
will be paid for separately. - Padak wood -
30mm thick shutters

9.5.1.2V Providing and fixing panelled or panelled sqm 3,321.00


and glazed shutters for doors , windows and
clerestory windows including ISI marked
black enamelled M.S butt hinges with
necessary screws excluding panelling which
will be paid for separately. - Vengai wood
- 30mm thick shutters.

Puducherry Region
9. Wood Work
Page No.: 186
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.6.1 Providing and fixing 35mm thick factory sqm 2,299.52


made laminated veneer lumber door shutter
conforming to IS:14616 and TADS 15:2001
(part B) including ISI marked black
enamelled M.S.butt hinges with necessary
screws and panelling with panels of: 12 mm
thick plain grade -1 , medium density flat
pressed three layer particle board FPT - 1
or graded wood particle board FPT -1,IS
:3087 marked bonded with BWP type synthetic
resin adhesive as per IS:848:

9.6.2 Providing and fixing 35mm thick factory sqm 2,299.52


made laminated veneer lumber door shutter
conforming to IS:14616 and TADS 15:2001
(part B) including ISI marked black
enamelled M.S.butt hinges with necessary
screws and panelling with panels of: 12 mm
thick prelaminated (with particle board
decorative lamination on both sides) grade
-1 , medium density flat pressed , three
layer particle board FPT -1 or graded wood
particle board FPT -1 , conforming to IS :
3087 bonded with BWP type synthetic resin
adhesive as per IS : 848 and prelamination
conforming to IS : 12823 grade 1, type -II
marked

9.6.3 Providing and fixing 35mm thick factory sqm 2,299.52


made laminated veneer lumber door shutter
conforming to IS:14616 and TADS 15:2001
(part B) including ISI marked black
enamelled M.S.butt hinges with necessary
screws and panelling with panels of: 12 mm
thick one side prelaminated (with particle
board decorative lamination on other sides)
and balancing lamination grade - 1 medium
density flat pressed , three layer particle
board FPT -1 or graded wood particle board
FPT -1 conforming to IS:3087 bonded with
BWP type synthetic resin adhesive as per IS
: 848 and prelamination conforming to IS :
12823 grade -1 , type II marked:

9.7.1B Providing and fixing panelling or panelling sqm 4,957.21


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick: Burma

Puducherry Region
9. Wood Work
Page No.: 187
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

teak wood

9.7.1P Providing and fixing panelling or panelling sqm 2,987.34


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick: Padak
wood

9.7.1V Providing and fixing panelling or panelling sqm 2,987.34


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick: Vengai
wood

9.7.3.1 Providing and fixing panelling or panelling sqm 1,623.72


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick: Ply
wood 5 ply, 9mm thick : De corative plywood
both side decorative veneer (Type -1)
conforming to IS 1328 BWR type

9.7.3.2 Providing and fixing panelling or panelling sqm 1,397.72


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick: Ply
wood 5 ply, 9mm thick : Decorative plywood
one side decorative veneer and commercial
veneer on other face (type 1) conforming to
IS 1328 BWR type

9.7.4.1 Providing and fixing panelling or panelling sqm 1,453.13


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside

Puducherry Region
9. Wood Work
Page No.: 188
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

grooves or rebates to be measured).


Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick: Ply
wood 7 ply , 9mm thick : Decorative plywood
one side decorative veneer and commercial
veneer on other face (Type 1) conforming to
IS 1328 BWR type

9.7.5.1 Providing and fixing panelling or panelling sqm 958.64


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick:
Particle board 12mm thick - Plain particle
board flat pressed , 3 layer or graded wood
particle board medium density grade 1 , IS
: 3087 marked

9.7.5.2 Providing and fixing panelling or panelling sqm 1,160.19


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick:
Particle board 12mm thick - Veneered flat
pressed three layer or graded wood particle
board with commercial veneering on both
sides conforming to IS:3097, grade 1

9.7.5.3 Providing and fixing panelling or panelling sqm 1,030.63


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick:
Particle board 12 mm thick - Prelaminated
particle board with decorative lamination
on one side and balancing lamination on
other side , grade 1 , type II IS:12823
marked

9.7.5.4 Providing and fixing panelling or panelling sqm 1,096.85


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for

Puducherry Region
9. Wood Work
Page No.: 189
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

panel inserts excluding portion inside


grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick:
Particle board 12mm thick - Prelaminated
particle board with decorative lamination
on both sides , grade 1, type II , IS:12823
marked

9.8.1 Providing and fixing panelling or panelling sqm 1,393.39


and glazing in panelled or panelled and
glazed shutters for doors, windows and
clerestory windows (area of opening for
panel inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled and
glazed shutters 25mm to 40mm thick. Coir
veneer board (conforming to IS : 14842 -
2000): 12mm thick

9.9.1.1B Providing and fixing glazed shutters for sqm 7,201.55


doors, windows and clerestory windows using
4 mm thick float glass panes including
black enamelled ISI marked MS butt hinges
with necessary screws. Burma teak wood -
35mm thick

9.9.1.1P Providing and fixing glazed shutters for sqm 4,454.33


doors, windows and clerestory windows using
4 mm thick float glass panes including
black enamelled ISI marked MS butt hinges
with necessary screws. Padak wood - 35mm
thick

9.9.1.1V Providing and fixing glazed shutters for sqm 4,454.33


doors, windows and clerestory windows using
4 mm thick float glass panes including
black enamelled ISI marked MS butt hinges
with necessary screws. Vengai wood - 35mm
thick

9.9.1.2B Providing and fixing glazed shutters for sqm 6,349.30


doors, windows and clerestory windows using
4mm thick float glass panes including black
enamelled ISI marked MS butt hinges with
necessary screws. - Burma teak wood -30mm
thick

9.9.1.2P Providing and fixing glazed shutters for sqm 3,981.00


doors, windows and clerestory windows using
4mm thick float glass panes including black
enamelled ISI marked MS butt hinges with

Puducherry Region
9. Wood Work
Page No.: 190
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

necessary screws. - Padak teak wood -30mm


thick

9.9.1.2V Providing and fixing glazed shutters for sqm 3,981.00


doors, windows and clerestory windows using
4mm thick float glass panes including black
enamelled ISI marked MS butt hinges with
necessary screws. - Vengai wood -30mm thick

9.10.1 Providing and fixing factory made laminated sqm 2,022.22


veneer lumber glazed shutter conforming to
IS 14616 and TADS 15:2001 (Part B), using
4mm thick float glass panes for doors ,
windows and clerestory windows including
ISI marked black enamelled M.S butt hinges
with necessary screws - 30 mm thick
shutters

9.11.1 Extra for providing heavy sheet float glass sqm 108.51
panes instead of ordinary float glass in
glazed doors, window and clerestory window
shutters (area of opening of glass panes
excluding portion inside rebate shall be
measured) - 5mm thick instead of 4mm thick

9.11.2 Extra for providing heavy sheet float glass sqm 223.05
panes instead of ordinary float glass in
glazed doors, window and clerestory window
shutters (area of opening of glass panes
excluding portion inside rebate shall be
measured) - 6mm thick instead of 4mm thick

9.12 Extra for providing frosted glass panes 4mm sqm 54.26
thick instead of ordinary float glass panes
4mm thick in doors, windows and clerestory
window shutters .(area of opening for glass
panes excluding portion inside rebate shall
be meaured)

9.13 Deduct for providing pin headed glass panes sqm -180.84
instead of ordinary float glass panes
weighing 4mm thick in doors , windows ,
clearestory windows shutters (area of
opening for glass panes excluding portion
inside rebate shall be measured)

9.14 Extra for providing ISI marked stainless sqm 79.04


steel buitt hinges instead of black
enamelled M.S. butt hinges with necessary
screws.(Shutter area to be measured)

9.15.1.1 Deduct if fixed shutters (without hinges) sqm 140.77

Puducherry Region
9. Wood Work
Page No.: 191
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

are provided instead of openable shutters


for doors, windows or clerestory windows
with: Stainless steel butt hinges with
stainless steel screws : For teak wood and
other wood shutters

9.15.2.1 Deduct if fixed shutters (without hinges) sqm 61.74


are provided instead of openable shutters
for doors, windows or clerestory windows
with: Black ena melled M.S. butt hinges
with necessary screws . For teak wood and
other wood shutters

9.16.1.1B Providing and fixing 25 mm thick shutters sqm 5,538.09


for cup board etc - Panelled or panelled &
glazed shutters - Burma teak wood including
ISI marked anodised aluminium butt hinges
with necessary screws

9.16.1.1P Providing and fixing 25 mm thick shutters sqm 3,643.45


for cup board etc - Panelled or panelled &
glazed shutters - Padak wood including ISI
marked anodised aluminium butt hinges with
necessary screws

9.16.1.1V Providing and fixing 25 mm thick shutters sqm 3,643.45


for cup board etc - Panelled or panelled &
glazed shutters - Vengai wood including ISI
marked anodised aluminium butt hinges with
necessary screws

9.16.2.1B Providing and fixing 25mm thick shutters sqm 5,650.35


for cup board etc: glazed shutters : Burma
teak wood including ISI marked anodised
aluminium butt hinge with necessary screws

9.16.2.1P Providing and fixing 25mm thick shutters sqm 3,613.62


for cup board etc: glazed shutters : Padak
wood including ISI marked anodised
aluminium butt hinge with necessary screws

9.16.2.1V Providing and fixing 25mm thick shutters sqm 3,613.62


for cup board etc: glazed shutters : Vengai
wood including ISI marked anodised
aluminium butt hinge with necessary screws

9.17.1 Providing and fixing pressed 3 layer sqm 512.76


particle board medium density exterior
grade (grade I) or graded wood particle
board IS: 3087 marked to frame, backing or
studding with screws etc. complete (Frame,
backing or studding to be paid

Puducherry Region
9. Wood Work
Page No.: 192
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

separately)-12mm thick.

9.17.2 Providing and fixing flat pressed 3 layer sqm 557.06


particle board medium density exterior
grade (grade 1) or graded wood particle
board IS : 3087 marked to frame , backing
or studding with screws etc. complete
(frames, backing or studding to be paid
separately) - 18mm thick

9.18.1 Providing and fixing prelaminated flat sqm 861.73


pressed 3 layer (medium density) particle
board or graded wood particle board IS:3087
marked with one side decorative and other
side balancing lamination grade 1,type II
exterior grade IS : 12823 marked in shelves
with screws and fittings wherever required
, edges to be painted with polyurethene
primer (fittings to be paid separateley) -
18mm thick

9.18.2 Providing and fixing prelaminated flat sqm 1,000.98


pressed 3 layer (medium density) particle
board or graded wood particle board IS:3087
marked with one side decorative and other
side balancing lamination grade 1,type II
exterior grade IS : 12823 marked in shelves
with screws and fittings wherever required
, edges to be painted with polyurethene
primer (fittings to be paid separateley) -
25mm thick

9.19.1.1B Providing and fixing 25mm thick shutters sqm 5,345.19


for cupboards etc. including ISI marked
black enamelled M.S. butt hinges with
necessary screws:- panelled or panelled
and glazed shutters - Burma teak wood

9.19.1.1P Providing and fixing 25mm thick shutters sqm 3,450.55


for cupboards etc. including ISI marked
black enamelled M.S. butt hinges with
necessary screws:- panelled or panelled
and glazed shutters - Padak wood

9.19.1.1V Providing and fixing 25mm thick shutters sqm 3,450.55


for cupboards etc. including ISI marked
black enamelled M.S. butt hinges with
necessary screws:- panelled or panelled
and glazed shutters - Vengai wood

9.19.2.1B Providing and fixing 25mm thick shutters sqm 5,603.57


for cupboards etc. including ISI marked

Puducherry Region
9. Wood Work
Page No.: 193
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

black enamelled M.S. butt hinges with


necessary screws: - glazed shutters - Burma
wood

9.19.2.1P Providing and fixing 25mm thick shutters sqm 3,566.84


for cupboards etc. including ISI marked
black enamelled M.S. butt hinges with
necessary screws: - glazed shutters - Padak
wood

9.19.2.1V Providing and fixing 25mm thick shutters sqm 3,566.84


for cupboards etc. including ISI marked
black enamelled M.S. butt hinges with
necessary screws: - glazed shutters -
Vengai wood

9.20.1 Providing and fixing ISI marked flush door sqm 2,593.09
shutters conforming to IS:2202 (Part 1)
decorative type, core of block board
construction with frame of 1 st class hard
wood and well matched teak 3 ply veneering
with vertical grains or cross bands and
face veneers on both faces of shutters.
35mm thick including ISI marked stainless
steel butt hinges with necessary screws.

9.20.2 Providing and fixing ISI marked flush door sqm 2,321.82
shutters conforming to IS:2202 (Part 1)
decorative type, core of block board
construction with frame of 1 st class hard
wood and well matched teak 3 ply veneering
with vertical grains or cross bands and
face veneers on both faces of shutters. -
30mm thick including ISI marked stainless
steel butt hinges with necessary screws

9.20.3 Providing and fixing ISI marked flush door sqm 2,231.39
shutters conforming to IS:2202 (Part 1)
decorative type, core of block board
construction with frame of 1 st class hard
wood and well matched teak 3 ply veneering
with vertical grains or cross bands and
face veneers on both faces of shutters. -
25mm thick (for cupboard) including ISI
marked nickel plated bright finished
M.S.Piano hinges IS : 3818 marked with
necessary screws

9.21.1 Providing and fixing ISI marked flush door sqm 2,080.70
shutters conforming to IS:2202 (Part 1)
non-decorative type, core of block board
construction with frame of 1 st class hard

Puducherry Region
9. Wood Work
Page No.: 194
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

wood and well matched commercial 3 ply


veneering with vertical grains or cross
bands and face veneers on both faces of
shutters. - 35 mm thick including ISI
marked stainless steel butt hinges with
necessary screws

9.21.2 Providing and fixing ISI marked flush door sqm 2,002.33
shutters conforming to IS:2202 (Part 1)
non-decorative type, core of block board
construction with frame of 1 st class hard
wood and well matched teak 3 ply veneering
with vertical grains or cross bands and
face veneers on both faces of shutters. -
30 mm thick including ISI marked stainless
steel butt hinges with necessary screws

9.21.3 Providing and fixing ISI marked flush door sqm 1,839.56
shutters conforming to IS : 2202 (part 1)
non - decorative type , core of block board
construction with frame of 1st cllass hard
wood and well matched commercial 3 ply
veneering with vertical grains or cross
bands and face veneers on both faces of
shutters: 25 mm thick (for cupboard)
including ISI marked nickel plated bright
finished M.S.piano hinges with necessary
screws

9.22.1 Extra for providing and fixing flush doors sqm 265.24
with decorative veneering on one side in
item no.9.21

9.23 Extra for providing lipping with teak wood sqm of doo 434.03
battens 25mm minimum depth on all edges of r area
shutters (over all area of door shutter to
be measured) over item no.9.20 and 9.21

9.24.1 Extra for providing vision panel not sqm of doo 144.68
exceeding 0.1 sqm in all type of flush r area
doors (cost of glass excluded) (overall
area of door shutter to be
measured):Rectangular or square

9.24.2 Extra for providing vision panel not sqm of doo 138.65
exceeding 0.1 sqm in all type of flush r area
doors (cost of glass excluded) (overall
area of door shutter to be
measured):Circular

9.25.1 Extra if louvers (not exceeding 0.2 sqm) sqm of doo 253.19
are provided in flush door shutters (over r area

Puducherry Region
9. Wood Work
Page No.: 195
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

all area of door shutters to be measured)

9.26 Extra for cutting rebate in flush door sqm of doo 60.29
shutters (toatal area of the shutter to be r area
measured)

9.27.1B Providing and fixing 35mm thick wire gauze sqm 6,517.31
shutters using galvanised M.S.wire gauze of
average width of aperture 1.4mm with wire
of dia 0.63 mm for doors , windows and
clerestory windows including ISI marked
bright finished or / and black enamelled
M.S. butt hinges with necessary screws:
Burma teak wood

9.27.1P Providing and fixing 35mm thick wire gauze sqm 4,082.71
shutters using galvanised M.S.wire gauze of
average width of aperture 1.4mm with wire
of dia 0.63 mm for doors , windows and
clerestory windows including ISI marked
bright finished or / and black enamelled
M.S. butt hinges with necessary screws:
Padak wood

9.27.1V Providing and fixing 35mm thick wire gauze sqm 4,082.71
shutters using galvanised M.S.wire gauze of
average width of aperture 1.4mm with wire
of dia 0.63 mm for doors , windows and
clerestory windows including ISI marked
bright finished or / and black enamelled
M.S. butt hinges with necessary screws:
Vengai wood

9.29.1B Providing and fixing 30mm thick wire gauze sqm 5,705.03
shutters using galvanised M.S.wire gauze of
average width of aperture 1.4mm with wire
of dia .0.63mm for doors, windows and
clerestory windows including ISI marked
stainless steel butt hinges with necessary
screws : - Burma teak wood

9.29.1P Providing and fixing 30mm thick wire gauze sqm 3,620.93
shutters using galvanised M.S.wire gauze of
average width of aperture 1.4mm with wire
of dia .0.63mm for doors, windows and
clerestory windows including ISI marked
stainless steel butt hinges with necessary
screws : - Padak wood

9.29.1V Providing and fixing 30mm thick wire gauze sqm 3,620.93
shutters using galvanised M.S.wire gauze of
average width of aperture 1.4mm with wire

Puducherry Region
9. Wood Work
Page No.: 196
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of dia .0.63mm for doors, windows and


clerestory windows including ISI marked
stainless steel butt hinges with necessary
screws : - Vengai wood

9.31.1 Providing and fixing wire gauge laminated sqm 2,070.45


veneer lumber shutters conforming to IS :
14616, and as per TADS 15: 2001 (part
B)using galvanised wire gauze with average
width of aperture 1.4mm in both directions
with wire of dia 0.63mm as per IS : 1568
for doors , windows and clerestory windows
including ISI marked bright finished or /
and black enamelled M.S. butt hinges with
necessary screws .- 35 mm thick shutters

9.31.2 Providing and fixing wire gauge laminated sqm 1,835.35


veneer lumber shutters conforming to IS :
14616, and as per TADS 15: 2001 (part
B)using galvanised wire gauze with average
width of aperture 1.4mm in both directions
with wire of dia 0.63mm as per IS : 1568
for doors , windows and clerestory windows
including ISI marked bright finished or /
and black enamelled M.S. butt hinges with
necessary screws .- 30 mm thick shutters

9.32B Providing 50x50x50 mm Burma teak wood plugs nos 38.28


including cutting brick work and fixing in
cement mortar 1:3 (1 cement : 3 fine sand)
and making good the walls etc.

9.32P Providing 50x50x50 mm Padak wood plugs nos 25.75


including cutting brick work and fixing in
cement mortar 1:3 (1 cement : 3 fine sand)
and making good the walls etc.

9.32V Providing 50x50x50 mm Vengai wood plugs nos 24.56


including cutting brick work and fixing in
cement mortar 1:3 (1 cement : 3 fine sand)
and making good the walls etc.

9.33.1 Providing and fixing expandable fasteners each 15.00


of specified size with necessary plastic
sleeves and galvanised M.S.screws including
drilling holes in masonry work / CC / RCC
and making good etc.complete -25mm long

9.33.2 Providing and fixing expandable fasteners each 17.42


of specified size with necessary plastic
sleeves and galvanised M.S.screws including
drilling holes in masonry work / CC / RCC

Puducherry Region
9. Wood Work
Page No.: 197
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and making good etc.complete - 32 mm long

9.33.3 Providing and fixing expandable fasteners each 18.75


of specified size with necessary plastic
sleeves and galvanised M.S.screws including
drilling holes in masonry work / CC / RCC
and making good etc.complete - 40mm long

9.33.4 Providing and fixing expandable fasteners each 21.16


of specified size with necessary plastic
sleeves and galvanised M.S.screws including
drilling holes in masonry work / CC / RCC
and making good etc.complete - 50mm long

9.34.1B Providing and fixing Burma teakwood plain sqm 10,577.18


lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
40mm thick

9.34.2B Providing and fixing Burma teakwood plain sqm 6,780.40


lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
25mm thick

9.34.3B Providing and fixing Burma teak wood plain sqm 5,472.87
lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
20mm thick

9.34.4B Providing and fixing Burma teak wood plain sqm 3,447.92
lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
12mm thick

9.35.1 Providing and fixing in wall lining flat sqm 719.10


pressed three layer (medium density)
particle board or graded wood prelaminated
one side decorative lamination on other
side balancing lamination grade 1,type II ,
IS: 12823 marked including priming coat on
unexposed surface , with necessary fixing
arrangement and screws etc. complete : -
12mm thick

9.35.2 Providing and fixing in wall lining flat sqm 984.34


pressed three layer (medium density)
particle board or graded wood prelaminated
one side decorative lamination on other

Puducherry Region
9. Wood Work
Page No.: 198
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

side balancing lamination grade 1,type II ,


IS: 12823 marked including priming coat on
unexposed surface , with necessary fixing
arrangement and screws etc. complete : -
18mm thick

9.35.3 Providing and fixing in wall lining flat sqm 1,130.22


pressed three layer (medium density)
particle board or graded wood prelaminated
one side decorative lamination on other
side balancing lamination grade 1,type II ,
IS: 12823 marked including priming coat on
unexposed surface , with necessary fixing
arrangement and screws etc. complete : -
25mm thick

9.36.1P Providing and fixing specified wood frame cum 1,67,846.72


work consisting of battens 50x25mm fixed
with rawl plug and drilling necessary holes
for rawl plug etc. including priming coat
complete - Padak wood

9.36.1V Providing and fixing specified wood frame cum 1,58,858.56


work consisting of battens 50x25mm fixed
with rawl plug and drilling necessary holes
for rawl plug etc. including priming coat
complete - vengai wood

9.37.1 Providing and fixing decorative plywood 4mm sqm 1,486.46


thick one side decorative veneer conforming
to IS : 1328 (type -1) for plain lining /
cladding with necessary screws , priming
coat on unexposed surface with : decorative
veneer facings of approved manufacture.

9.38 Providing and fixing 4mm thick coir veneer sqm 1,064.00
board , ISI marked IS : 14842 plain lining
with necessary screws , priming coat on
unexposed surface etc., complete

9.39.1 Providing and fixing skirting of sqm 1,223.86


prelaminated with (one side decorative and
other side balancing lamination) flat
pressed . 3 layer or graded particle board
(medium density) grade 1, type II , IS:
12823 marked, with necessary fixing
arrangements and screws including drilling
necessary holes for rawl plugs etc. and
priming coat on unexposed surface complete
-18mm thick

9.39.2 Providing and fixing skirting of sqm 1,369.74

Puducherry Region
9. Wood Work
Page No.: 199
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

prelaminated with (one side decorative and


other side balancing lamination) flat
pressed . 3 layer or graded particle board
(medium density) grade 1, type II , IS:
12823 marked, with necessary fixing
arrangements and screws including drilling
necessary holes for rawl plugs etc. and
priming coat on unexposed surface complete
-25mm thick

9.40.1.1B Providing and fixing wooden moulded beading metre 222.96


to door and window frames with iron screws
, plugs and priming coat on unexposed
surface etc.complete: Burma teak wood -
50x12 mm

9.40.1.2B Providing and fixing wooden moulded beading metre 324.82


to door and window frames with iron screws
, plugs and priming coat on unexposed
surface etc.complete: Burma teak wood -
50x20 mm

9.40.2.1P Providing and fixing wooden moulded beading metre 155.43


to door and window frames with iron screws
, plugs and priming coat on unexposed
surface etc.complete: Padak wood - 50x12
mm

9.40.2.1V Providing and fixing wooden moulded beading metre 155.43


to door and window frames with iron screws
, plugs and priming coat on unexposed
surface etc.complete: Vengai wood - 50x12
mm

9.40.2.2P Providing and fixing wooden moulded beading metre 212.28


to door and window frames with iron screws
, plugs and priming coat on unexposed
surface etc.complete: Padak wood 50X20mm

9.40.2.2V Providing and fixing wooden moulded beading metre 212.28


to door and window frames with iron screws
, plugs and priming coat on unexposed
surface etc.complete: Vengai wood 50X20mm

9.41.1B Providing and fixing plain jaffri of sqm 3,937.32


35x10mm laths placed 35 mm apart (frames to
be paid separately) including fixing 50x12
mm beading complete with : Burma teak wood

9.42 Providing and fixing 18mm thick , 150mm metre 321.33


wide pelmet of flat pressed 3 layer or
graded wood particle board medium density

Puducherry Region
9. Wood Work
Page No.: 200
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

grade 1, IS: 3087 marked including top


cover of 6mm commercial ply wood conforming
to IS: 303 BWR grade, nickel plated M.S.
pipe 20mm dia (heavy type) curtain rod with
nickel plated brackets including fixing
with 25x3 mm M.S. flat 10 cm long and rawl
plugs 50mm long (designation 10 no) etc all
complete

9.43 Providing and fixing 18mm thick ,150mm wide metre 443.41
pelmet of coir veneer board ISI marked IS :
14842 - 2000 , including top cover of 6mm
coir veneer board, nickel plated M.S. pipe
20mm dia (heavy type) curtain rod with
nickel plated brackets including fixing
with 25x3 mm M.S.flat 10cm long and rawl
plug 50mm long (designation 10 no) etc.,all
complete

9.44.1 Extra for using veneered particle board metre 21.22


conforming to IS 3097 grade 1, in item of
pelmet 18mm thick 150mm wide - non
decorative veneer on both sides

9.44.2 Extra for using veneered particle board metre 91.63


conforming to IS 3097 grade 1 , in item of
pelmet 18mm thick 150mm wide - particle
board with decorative veneering on both
sides

9.45 Providing and fixing teak wood lipping of meter 42.50


size 25x3 mm in pelmet

9.46.1 Providing and fixing curtain rods of 1.25 metre 270.10


mm thick chromium plated brass plate, with
two chromium plated brass brackets fixed
with C.P. brass screws and wooden plugs
,etc., wherever necessary complete: - 12mm
dia

9.46.2 Providing and fixing curtain rods of 1.25 metre 360.53


mm thick chromium plated brass plate, with
two chromium plated brass brackets fixed
with C.P.brass screws and wooden plugs,
etc., wherever necessary complete: - 20mm
dia

9.46.3 Providing and fixing curtain rods of 1.25 metre 432.86


mm thick chromium plated brass plate, with
two chromium plated brass brackets fixed
with C.P.brass screws and wooden plugs,
etc., wherever necessary complete: - 25mm

Puducherry Region
9. Wood Work
Page No.: 201
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

dia

9.47.1 Providing and fixing nickel plated M.S.pipe metre 111.94


curtain rods with nickel plated brackets :
- 20mm dia (heavy type)

9.47.2 Providing and fixing nickel plated M.S. metre 120.49


pipe curtain rods with nickel plated
brackets : - 25mm dia (heavy type)

9.48.1 Providing and fixing M.S.grills of required kg 109.16


pattern in frames of windows etc. with
M.S.flats , square or round bars etc .all
complete - Fixed to steel windows by
welding

9.48.2 Providing and fixing M.S.grills of required kg 118.88


pattern in frames of windows etc. with M.S.
flats, square or round bars etc .all
complte - fixed to openings / wooden frames
with rawl plugs screws etc

9.49B Providing and fixing expanded metal 20x60mm sqm 1,476.12


strands 3.25mm wide and 1.6mm thick for
windows etc. including 62x19mm beading of
Burma teak wood

9.50B Providing and fixing hard drawn steel wire sqm 1,565.56
fabric 75 x 25 mm mesh of weight not less
than 7.75 kg per sqm to window frames etc.
including 62x19mm beading of Burma teak
wood

9.51.1B Providing and fixing fly proof galvanised sqm 1,356.52


M.S. wire gauge to windows and clerestory
windows using galvanised M.S. wire gauge
with average width of aperture 1.4 mm -
with Burma teak wood beading 62x19mm

9.51.2 Providing and fixing fly proof galvanised sqm 490.13


M.S. wire gauge to windows and clerestory
windows using galvanised M.S. wire gauge
with average width of aperture 1.4 mm -
with 12mm mild steel U beading

9.52 Deduct for fixing 75 x 25 mm hard drawn sqm 12.06


steel wire fabric of weight not less than
7.75 kg.per sqm in panelled and glazed door
and window shutter instead of glass sheet
4mm thick

9.53 Providing 40x5 mm flat iron hold fast 40cm each 119.37

Puducherry Region
9. Wood Work
Page No.: 202
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

long including fixing to frame with 10mm


diameter bolts, nuts and wooden plugs and
embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 20mm
nominal size)

9.54.1P Providing beams including hoisting , fixing cum 1,36,548.23


in position and applying wood preservative
for the unexposed surfaces , etc . complete
with : Padak wood

9.54.1V Providing beams including hoisting , fixing cum 1,36,548.23


in position and applying wood preservative
for the unexposed surfaces , etc . complete
with : Vengai wood

9.54.2B Providing beams including hoisting , fixing cum 2,40,874.53


in position and applying wood preservative
for the unexposed surfaces , etc . Complete
with : Burma teak wood

9.55.1 Providing and fixing ISI marked M.S. each 35.90


pressed butt hinges bright finished with
necessary screws etc.complete -
125x65x2.12mm

9.55.2 Providing and fixing ISI marked M.S. each 30.36


pressed butt hinges bright finished with
necessary screws etc.complete -
100x58x1.90mm

9.55.3 Providing and fixing ISI marked M.S. each 23.61


pressed butt hinges bright finished with
necessary screws etc.complete -
75x47x1.70mm

9.55.4 Providing and fixing ISI marked M.S. each 13.14


pressed butt hinges bright finished with
necessary screws etc.complete -
50x37x1.50mm

9.56.1 Providing and fixing IS : 1341 marked hinges 55.80


M.S.heavy weight butt hinges with necessary
screws etc.complete : 125x90x4.00mm

9.56.2 Providing and fixing IS 1341 marked MS each 35.78


Heavy weight butt hinges with necessary
screws etc.complete - 100x75x3.50mm

9.56.3 Providing and fixing IS 1341 marked MS each 23.85


heavy weight butt hinges with necessary

Puducherry Region
9. Wood Work
Page No.: 203
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

screws etc.complete - 75x60x3.10mm

9.56.4 Providing and fixing IS 1341 marked MS each 13.14


heavy weight butt hinges with necessary
screws etc.complete - 50x40x2.50mm

9.57.1 Providing and fixing ISI marked oxidised M each 47.12


S pressed butt hinges with necessary screws
etc.complete - 125x65x2.12mm

9.57.1R Providing and fixingISI marked powder each 65.20


coating pressed butt hinges with necessary
screws etc complete -125x65x2.12mm

9.57.2 Providing and fixing ISI marked oxidised each 36.75


M.S.pressed butt hinges with necessary
screws etc.complete - 100x58x1.90mm

9.57.2R Providing and fixing ISI marked Powder each 48.32


coating .pressed butt hinges with necessary
screws etc.complete - 100x58x1.90mm

9.57.3 Providing and fixing ISI marked oxdised each 29.39


M.S. pressed butt hinges with necessary
screws etc.complete - 75x47x1.70mm

9.57.4 Providing and fixing ISI marked oxidised each 16.64


M.S. pressed butt hinges with necessary
screws etc.complete - 50x37x1.50mm

9.57.4R Providing and fixing ISI marked Powder each 19.29


coating pressed butt hinges with necessary
screws etc.complete - 50x37x1.50mm

9.58.1 Providing and fixing ISI marked oxidised each 81.48


M.S. pressed parliamentary hinges with
necessary screws etc. complete -
150x125x27x2.80mm

9.58.1R Providing and fixing ISI marked Powder each 215.42


coating. pressed parliamentary hinges with
necessary screws etc. complete -
150x125x27x2.80mm

9.58.2 Providing and fixing ISI marked oxidised each 67.01


M.S.pressed parliamentary hinges with
necessary screws etc. complete : -
125x125x27x2.80mm

9.58.2R Providing and fixing ISI marked powder each 182.27


coating pressed parliamentary hinges with
necessary screws etc. complete : -

Puducherry Region
9. Wood Work
Page No.: 204
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

125x125x27x2.80mm

9.58.3 Providing and fixing ISI marked oxidised each 65.20


M.S.pressed parliamentary hinges with
necessary screws etc. complete : -
100x125x27x2.80mm

9.58.3R Providing and fixing ISI marked powder each 152.13


coating .pressed parliamentary hinges with
necessary screws etc. complete : -
100x125x27x2.80mm

9.58.4 Providing and fixing ISI marked oxidised each 55.44


M.S.pressed parliamentary hinges with
necessary screws etc. complete : -
75x100x20x2.24mm

9.58.4R Providing and fixing ISI marked powder each 114.15


coating .pressed parliamentary hinges with
necessary screws etc. complete : -
75x100x20x2.24mm

9.59.1 Providing and fixing ISI marked oxidised each 151.67


M.S. single acting spring hinges with
necessary screws etc.complete : 150mm

9.59.1R Providing and fixing ISI marked.powder each 370.49


coating single acting spring hinges with
necessary screws etc.complete : 150mm

9.59.2 Providing and fixing ISI marked oxidised each 145.64


M.S. single acting spring hinges with
necessary screws etc.complete : 125mm

9.59.2R Providing and fixing ISI marked powder each 319.25


coating. single acting spring hinges with
necessary screws etc.complete : 125mm

9.59.3 Providing and fixing ISI marked oxidised each 107.54


M.S. single acting spring hinges with
necessary screws etc.complete : 100mm

9.59.3R Providing and fixing ISI marked powder each 246.91


coating single acting spring hinges with
necessary screws etc.complete : 100mm

9.60.1 Providing and fixing oxidised M.S. double each 157.70


acting spring hinges with necessary screws
etc .complete - 150 mm

9.60.1R Providing and fixing powder coating. double each 357.83


acting spring hinges with necessary screws

Puducherry Region
9. Wood Work
Page No.: 205
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

etc .complete - 150 mm

9.60.2 Providing and fixing oxidised M.S.double each 145.64


acting spring hinges with necessary screws
etc.complete - 125 mm

9.60.2R Providing and fixing powder coating .double each 315.64


acting spring hinges with necessary screws
etc.complete - 125 mm

9.60.3 Providing and fixing oxidised M.S.double each 105.13


acting spring hinges with necessary screws
etc.complete - 100 mm

9.60.3R Providing and fixing powder coating .double each 240.89


acting spring hinges with necessary screws
etc.complete - 100 mm

9.61.1 Providing M.S.piano hinges ISI marked IS: metre 181.82


3818 finished with nickel plating and
fixing with necessary screws etc., complete
- over all width 35 mm

9.61.2 Providing M.S.piano hinges ISI marked IS: metre 172.16


3818 finished with nickel plating and
fixing with necessary screws etc., complete
- over all width 50 mm

9.61.3 Providing M.S.piano hinges ISI marked IS: metre 184.22


3818 finished with nickel plating and
fixing with necessary screws etc., complete
- over all width 65 mm

9.62.1 Providing and fixing ISI marked oxidised each 147.97


M.S.sliding door bolts with nuts and screws
etc. complete - 300x16mm

9.62.1R Providing and fixing ISI marked powder each 283.00


coating sliding door bolts with nuts and
screws etc. complete - 300x16mm

9.62.2 Providing and fixing ISI marked oxidised each 122.43


M.S. sliding door bolts with nuts and
screws etc.complete - 250x16mm

9.62.2R Providing and fixing ISI marked powder each 250.95


coating sliding door bolts with nuts and
screws etc.complete - 250x16mm

9.63.1 Providing and fixing ISI marked oxidised each 77.16


M.S. tower bolt black finish , (barrel
type) with necessary screws etc. complete:

Puducherry Region
9. Wood Work
Page No.: 206
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

- 250 x 10mm

9.63.1R Providing and fixing ISI marked powder each 94.64


coating tower bolt black finish , (barrel
type) with necessary screws etc. complete:
- 250 x 10mm

9.63.2 Providing and fixing ISI marked oxidised each 57.99


M.S. tower bolt black finish , (barrel
type) with necessary screws etc. complete:
- 200 x 10 mm

9.63.2R Providing and fixing ISI marked powder each 76.80


coating tower bolt black finish , (barrel
type) with necessary screws etc. complete:
- 200 x 10 mm

9.63.3 Providing and fixing ISI marked oxidised each 44.85


M.S. tower bolt black finish , (barrel
type) with necessary screws etc. complete:
- 150 x 10 mm

9.63.3R Providing and fixing ISI marked powder each 62.57


coating. tower bolt black finish , (barrel
type) with necessary screws etc. complete:
- 150 x 10 mm

9.63.4 Providing and fixing ISI marked oxidised each 37.74


M.S. tower bolt black finish , (barrel
type) with necessary screws etc. complete:
- 100 x 10 mm

9.63.4R Providing and fixing ISI marked Powder each 59.08


coating tower bolt black finish , (barrel
type) with necessary screws etc. complete:
- 100 x 10 mm

9.64 Providing and fixing ISI marked 85x42mm each 64.80


oxidised M.S. pull bolt lock conforming to
IS :7534 with necessary screws bolts , nut
and washers etc. complete

9.64R Providing and fixing ISI marked 85x42mm each 80.48


powder coating pull bolt lock conforming
to IS :7534 with necessary screws bolts ,
nut and washers etc. complete

9.65.1 Providing and fixing ISI marked oxidised each 61.49


M.S. door latches conforming to IS : 5930
with screws etc. complete : - 300 x 20x 6mm

9.65.1R Providing and fixing ISI marked powder each 165.35

Puducherry Region
9. Wood Work
Page No.: 207
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

coating. door latches conforming to IS :


5930 with screws etc. complete : - 300 x
20x 6mm

9.65.2 Providing and fixing ISI marked oxidised each 59.08


M.S. door latches conforming to IS : 5930
with screws etc. complete : - 250x20x6mm

9.65.2R Providing and fixing ISI marked powder each 147.27


coating. door latches conforming to IS :
5930 with screws etc. complete : -
250x20x6mm

9.66.1 Providing and fixing ISI marked oxidised each 43.76


M.S. handles conforming to IS : 4992 with
necessary screws etc.complete : 125mm

9.66.1R Providing and fixing ISI marked powder each 121.41


coating handles conforming to IS : 4992
with necessary screws etc.complete : 125mm

9.66.2 Providing and fixing ISI marked oxidised each 34.12


M.S. handles conforming to IS : 4992 with
necessary screws etc.complete : 100 mm

9.66.2R Providing and fixing ISI marked powder each 91.27


coating. handles conforming to IS : 4992
with necessary screws etc.complete : 100 mm

9.66.3 Providing and fixing ISI marked oxidised each 24.47


M.S. handles conforming to IS : 4992 with
necessary screws etc.complete : 75mm

9.66.3R Providing and fixing ISI marked powder each 67.15


coating. handles conforming to IS : 4992
with necessary screws etc.complete : 75mm

9.67.1 Providing and fixing oxidised M.S.hasp and each 35.93


staple (safety type) conforming to IS : 363
with necessary screws etc.complete : -
150mm

9.67.1R Providing and fixing powder coating .hasp each 19.41


and staple (safety type) conforming to IS :
363 with necessary screws etc.complete
150mm

9.67.2 Providing and fixing oxidised M.S.hasp and each 31.23


staple (safety type) conforming to IS : 363
with necessary screws etc.complete : - 115
mm

Puducherry Region
9. Wood Work
Page No.: 208
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.67.2R Providing and fixing powder coating.hasp each 17.30


and staple (safety type) conforming to IS :
363 with necessary screws etc.complete 115
mm

9.67.3 Providing and fixing oxidised M.S.hasp and each 28.21


staple (safety type) conforming to IS : 363
with necessary screws etc.complete : -
90mm

9.67.3R Providing and fixing powder coating.hasp each 16.70


and staple (safety type) conforming to IS :
363 with necessary screws etc.complete
90mm

9.68.1 Providing and fixing oxidised M.S.casement each 34.12


stays (straight peg type) with necessary
screws etc.complete. - 300mm weighing not
less than 200 gms

9.68.1R Providing and fixing powder coating each 41.11


.casement stays (straight peg type) with
necessary screws etc.complete. - 300mm
weighing not less than 200 gms

9.68.2 Providing and fixing oxidised M.S.casement each 27.85


stays (straight peg type) with necessary
screws etc.complete. - 250mm weighing not
less than 150 gms

9.68.2R Providing and fixing powder each 48.83


coating.casement stays (straight peg type)
with necessary screws etc.complete. - 250mm
weighing not less than 150 gms

9.68.3 Providing and fixing oxidised M.S.casement each 24.23


stays (straight peg type) with necessary
screws etc . Complete - 200mm weighing not
less than 120 gms

9.68.3R Providing and fixing powder each 64.50


coating.casement stays (straight peg type)
with necessary screws etc . Complete -
200mm weighing not less than 120 gms

9.69 Providing and fixing oxidised M.S.safety each 61.37


chain with necessary fixtures for doors .
(weighing not less than 450 gms)

9.69R Providing and fixing powder coating.safety each 103.69


chain with necessary fixtures for doors .
(weighing not less than 450 gms)

Puducherry Region
9. Wood Work
Page No.: 209
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.70.1 Providing and fixing IS : 12817 marked each 64.94


stainless steel butt hinges with stainless
steel screws etc.complete: - 125x64x1.90mm

9.70.2 Providing and fixing IS : 12817 marked each 50.03


stainless steel butt hinges with stainless
steel screws etc.complete: - 100x58x1.90mm

9.70.3 Providing and fixing IS : 12817 marked each 37.42


stainless steel butt hinges with stainless
steel screws etc.complete: - 75x47x1.80mm

9.70.4 Providing and fixing IS : 12817 marked each 21.03


stainless steel butt hinges with stainless
steel screws etc.complete: - 50x37x1.50mm

9.71.1 Providing and fixing IS : 12817 marked each 73.74


stainless steel butt hinges (heavy weight)
with stainless steel screws etc. complete :
- 125x64x2.50mm

9.71.2 Providing and fixing IS:12817 marked each 56.18


stainless steel butt hinges (heavy weight)
with stainless steel screws etc.complete :
- 100x60x2.50mm

9.71.3 Providing and fixing IS : 12817 marked each 42.37


stainless steel butt hinges with stainless
steel screws etc.complete: - 75x50x2.50mm

9.72.1 Providing and fixing bright finished brass each 290.80


butt hinges with necessary screws
etc.complete :- 125x85x5.5mm (heavy type)

9.72.2 Providing and fixing bright finished brass each 206.41


butt hinges with necessary screws
etc.complete :- 125x70x4mm (ordinary type)

9.72.3 Providing and fixing bright finished brass each 251.62


butt hinges with necessary screws
etc.complete :- 100x85x5.5mm (heavy type)

9.72.4 Providing and fixing bright finished brass each 136.48


butt hinges with necessary screws
etc.complete :- 100x70x4mm (ordinary type)

9.72.5 Providing and fixing bright finished brass each 134.79


butt hinges with necessary screws
etc.complete: - 75x65x4mm (heavy type)

9.72.6 Providing and fixing bright finished brass each 76.32

Puducherry Region
9. Wood Work
Page No.: 210
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

butt hinges with necessary screws


etc.complete: - 75x40x2.5mm (ordinary
type)

9.72.7 Providing and fixing bright finished brass each 38.82


butt hinges with necessary screws
etc.complete: - 50x40x2.5mm (ordinary
type)

9.73.1 Providing and fixing bright finished brass each 371.92


parliamentry hinges with necessary screws
etc.complete : -150x125x27x5mm

9.73.2 Providing and fixing bright finished brass each 359.86


parliamentry hinges with necessary screws
etc.complete : -125x125x27x5mm

9.73.3 Providing and fixing bright finished brass each 335.75


parliamentry hinges with necessary screws
etc.complete : -100x125x27x5mm

9.73.4 Providing and fixing bright finished brass each 264.13


parliamentry hinges with necessary screws
etc.complete : -75x100x20x3.2mm

9.74.1 Providing and fixing bright finished brass each 380.98


tower bolts (barrel type) with necessary
screws etc.complete : - 250x10mm

9.74.2 Providing and fixing bright finished brass each 333.72


tower bolts (barrel type) with necessary
screws etc.complete : - 200x10mm

9.74.3 Providing and fixing bright finished brass each 261.38


tower bolts (barrel type) with necessary
screws etc.complete : - 150x10mm

9.74.4 Providing and fixing bright finished brass each 196.04


tower bolts (barrel type) with necessary
screws etc.complete : - 100x10mm

9.75.1 Providing and fixing bright finished brass each 294.78


door latch with necessary screws
etc.complete - 300x16x5mm

9.75.2 Providing and fixing bright finished brass each 264.64


door latch with necessary screws
etc.complete - 250 x16x5mm

9.76 Providing and fixing bright finished brass each 1,134.95


100 mm mortice latch and lock with 6 levers
and a pair of lever handles with necessary

Puducherry Region
9. Wood Work
Page No.: 211
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

screws etc. complete (best make of approved


quality)

9.77 Providing and fixing bright finished brass each 990.27


100 mm mortice latch with one dead bolt and
a pair of lever handles with necessary
screws etc. complete (best make of approved
quality)

9.78 Providing and fixing bright finished brass each 1,074.66


night latch including necessary screws etc.
complete (best make of approved quality)

9.79.1 Providing and fixing special quality bright each 194.55


finished brass cupboard or ward robe locks
with four levers including necessary screws
etc.complete (best make of approved
quality) - 40mm

9.79.2 Providing and fixing special quality bright each 215.04


finished brass cupboard or ward robe locks
with four levers including necessary screws
etc.complete (best make of approved
quality) - 50mm

9.79.3 Providing and fixing special quality bright each 230.72


finished brass cupboard or ward robe locks
with four levers including necessary screws
etc.complete (best make of approved
quality) - 65mm

9.79.4 Providing and fixing special quality bright each 252.42


finished brass cupboard or ward robe locks
with four levers including necessary screws
etc.complete (best make of approved
quality) - 75mm

9.80 Providing and fixing 50mm bright finished each 56.67


brass cup board or wardrobe knob with
necessary screws (best make of approved
quality)

9.81.1 Providing and fixing bright finished brass each 221.84


handles with screws etc.complete: 125mm

9.81.2 Providing and fixing bright finished brass each 185.67


handles with screws etc.complete: 100mm

9.81.3 Providing and fixing bright finished brass each 131.42


handles with screws etc.complete : 75mm

9.82 Providing and fixing bright finished brass each 89.82

Puducherry Region
9. Wood Work
Page No.: 212
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

hanging type floor stopper with necessary


screws, etc.complete

9.83 Providing and fixing IS:3564 make aluminium each 1,536.71


die cast body tubular type universal
hydraulic door closer with necessary
accessories and screws etc complete

9.84 Providing and fixing IS:3564 make aluminium each 1,094.24


extruded section body tubular type
universal hydraulic door closer with double
speed adjustment with necessary accessories
and screws etc.complete

9.85 Providing and fixing bright finished brass each 79.57


casement window fastner with necessary
screws etc.complete

9.86.1 Providing and fixing bright finished brass each 160.83


casement stays (straight peg type) with
necessary screws etc.complete : - 300 mm
weighing not less than 330 gms

9.86.2 Providing and fixing bright finished brass each 139.85


casement stays (straight peg type) with
necessary screws etc.complete : - 250 mm
weighing not less than 280 gms

9.86.3 Providing and fixing bright finished brass each 115.74


casement stays (straight peg type) with
necessary screws etc.complete : - 200 mm
weighing not less than 240 gms

9.87.1 Providing and fixing bright finished brass each 115.74


hasp and stable (safety type) with
necessary screws etc.complete - 150mm

9.87.2 Providing and fixing bright finished brass each 88.43


hasp and staple (safety type) with
necessary screws etc.complete:115mm

9.87.3 Providing and fixing bright finished brass each 70.95


hasp and staple (safety type) with
necessary screws etc.complete:- 90 mm

9.88 Providing and fixing chromium plated brass each 1,026.44


100 mm mortice latch and lock with 6 levers
and a pair of lever handles with necessary
screws etc.complete (best make of approved
quality)

9.89 Providing and fixing chromium plated brass each 905.87

Puducherry Region
9. Wood Work
Page No.: 213
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

night latch including necessary screws


etc.complete (best make of approved
quality)

9.90.1 Providing and fixing special quality each 189.73


chromium plated brass cupboard locks with
six levers including necessary screws
etc.complete (best make of approved
quality) of : - 40mm

9.90.2 Providing and fixing special quality each 211.43


chromium plated brass cupboard locks with
six levers including necessary screws
etc.complete (best make of approved
quality) of : - 50mm

9.90.3 Providing and fixing special quality each 229.51


chromium plated brass cupboard locks with
six levers including necessary screws
etc.complete (best make of approved
quality) of : - 65mm

9.90.4 Providing and fixing special quality each 251.22


chromium plated brass cupboard locks with
six levers including necessary screws
etc.complete (best make of approved
quality) of : - 75mm

9.91 Providing and fixing chromium plated brass each 62.69


50mm cupboard or wardrobe knobs with nuts
complete

9.92.1 Providing and fixing chromium plated brass each 288.15


handles with necessary screws etc.complete
: - 125mm

9.92.2 Providing and fixing chromium plated brass each 264.04


handles with necessary screws etc.complete
- 100 mm

9.92.3 Providing and fixing chromium plated brass each 197.72


handles with necessary screws etc.complete
: - 75mm

9.93 Providing and fixing chromium plated brass each 127.80


casement window fastner with necessary
screws etc.complete

9.94.1 Providing and fixing chromium plated brass each 194.11


casement stays (straight peg type) with
necessary screws etc.complete : - 300mm
weighing not less than 330 gms

Puducherry Region
9. Wood Work
Page No.: 214
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.94.2 Providing and fixing chromium plated brass each 176.02


casement stays (straight peg type) with
necessary screws etc.complete : - 250 mm
weighing not less than 280 gms

9.94.3 Providing and fixing chromium plated brass each 151.91


casement stays (straight peg type) with
necessary screws etc.complete : - 200mm
weighing not less than 240 gms

9.95.1 Providing and fixing ISI marked aluminium each 145.74


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
125x75x4mm

9.95.2 Providing and fixing ISI marked aluminium each 136.70


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
125x63x4mm

9.95.3 Providing and fixing ISI marked aluminium each 128.01


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
100x75x4mm

9.95.4 Providing and fixing ISI marked aluminium each 128.01


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
100x63x4mm

9.95.5 Providing and fixing ISI marked aluminium each 115.96


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
100 x63x3.2mm

9.95.6 Providing and fixing ISI marked aluminium each 80.39


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
75x63x4mm

Puducherry Region
9. Wood Work
Page No.: 215
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.95.7 Providing and fixing ISI marked aluminium each 71.95


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
75x63x3.2mm

9.95.8 Providing and fixing ISI marked aluminium each 62.91


butt hinges anodised (anodic coating not
less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
75x45x3.2mm

9.96.1 Providing and fixing aluminium sliding door each 338.79


bolts ISI marked anodised (anodic coating
not less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with nuts and screws etc.complete:-
300x16mm

9.96.2 Providing and fixing aluminium sliding door each 302.62


bolts ISI marked anodised (anodic coating
not less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with nuts and screws etc.complete:-
250x16mm

9.97.1 Providing and fixing aluminium tower bolts each 153.90


ISI marked anodised (anodic coating not
less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
- 300x10mm

9.97.2 Providing and fixing aluminium tower bolts each 144.86


ISI marked anodised (anodic coating not
less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
-250x10mm

9.97.3 Providing and fixing aluminium tower bolts each 129.79


ISI marked anodised (anodic coating not
less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
- 200x10mm

9.97.4 Providing and fixing aluminium tower bolts each 104.17


ISI marked anodised (anodic coating not
less than grade AC 10 as per IS:1868)

Puducherry Region
9. Wood Work
Page No.: 216
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

transparent or dyed to required colour or


shade with necessary screws etc.complete :
- 150x10mm

9.97.5 Providing and fixing aluminium tower bolts each 70.89


ISI marked anodised (anodic coating not
less than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete :
- 100x10mm

9.98 Providing and fixing aluminium pull bolt each 77.46


lock anodised ISI marked (anodic coating
not less than grade AC 10 as per IS :1868)
transparent or dyed to required colour and
shade with necessary screws bolts , nuts
and washers etc .complete

9.99 Providing and fixing 50cm long aluminium each 194.23


kicking plate 100x3.15mm anodised (anodic
coating not less than grade AC 10 as per IS
: 1868) transparent or dyed to required
colour or shade with necessary screws
etc.complete

9.100.1 Providing and fixing aluminium handles ISI each 71.13


marked anodised (anodic coating not less
than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete
:-125mm

9.100.2 Providing and fixing aluminium handles ISI each 62.09


marked anodised (anodic coating not less
than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete
:-100mm

9.100.3 Providing and fixing aluminium handles ISI each 54.13


marked anodised (anodic coating not less
than grade AC 10 as per IS:1868)
transparent or dyed to required colour or
shade with necessary screws etc.complete
:-75mm

9.101.1 Providing and fixing aluminium hanging each 60.89


floor door stopper ISI marked anodised
(anodic coating not less than grade AC 10
as per IS : 1868) transparent or dyed to
required colour and shade with necessary
screws etc.complete - single rubber stopper

Puducherry Region
9. Wood Work
Page No.: 217
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.101.2 Providing and fixing aluminium hanging each 97.05


floor door stopper ISI marked anodised
(anodic coating not less than grade AC 10
as per IS : 1868) transparent or dyed to
required colour and shade with necessary
screws etc.complete - Twin rubber stopper

9.102 Providing and fixing aluminium casement each 95.25


stays ISI marked anodised (anodic coating
not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour and
shade with necessary screws etc.complete

9.103 Providing and fixing bright finished brass each 1,193.59


100mm mortice latch and lock ISI marked
with six levers and a pair of anodised
(anodic coating not less than grade AC 10
as per IS:1868) aluminium lever handles
with necessary screws etc.complete (best
make of approved quality)

9.104 Providing and fixing aluminium tee channels metre 64.67


(heavy duty) with rollers, stop end in
pelmets as curtain rod

9.105.1 Providing and fixing partition upto ceiling sqm 1,332.99


height consisting of G.I.frame and required
board including providing and fixing of
frame work made of special section power
pressed / role form G.I.sheet with zinc
coating of grade 175 consisting of floor
and ceiling channel 50mm wide having equal
flanges of 32mm and 0.5mm thick fixed to
the floor and ceiling at the spacing of
610mm centre to centre with dash fastener
of 12.5mm dia -meter, 40mm length and the
studs 48mm wide having one flange of 34mm
and other flange 36mm and 0.50mm thick
fixed vertically within flanges of floor
and ceiling channel and placed at a spacing
of 610mm centre to centre by 6mm dia bolts
and nuts at both ends of partition fixed
flush to wall with rawl plugs at spacing
450mm centre to centre and fixing of boards
to either side of frame work by 25mm drive
all screws on studs, floor and ceiling
channels at the spacing of 300mm centre to
centre , including jointing and finishing
to a flush finish with recommended jointing
compound , jointing tape, joint finisher
and two coats of primer suitable for board
as per manufacture's specification and all

Puducherry Region
9. Wood Work
Page No.: 218
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

complete - 67mm overall thickness partition


with 8.5mm thick double skin glass
reinforced gypsum (GRG) board conforming to
IS : 2095 :part III

9.105.2 Providing and fixing partition upto ceiling sqm 1,202.78


height consisting of G.I.frame and required
board including providing and fixing of
frame work made of special section power
pressed / role form G.I.sheet with zinc
coating of grade 175 consisting of floor
and ceiling channel 50mm wide having equal
flanges of 32mm and 0.5mm thick fixed to
the floor and ceiling at the spacing of
610mm centre to centre with dash fastener
of 12.5mm dia -meter, 40mm length and the
studs 48mm wide having one flange of 34mm
and other flange 36mm and 0.50mm thick
fixed vertically within flanges of floor
and ceiling channel and placed at a spacing
of 610mm centre to centre by 6mm dia bolts
and nuts at both ends of partition fixed
flush to wall with rawl plugs at spacing
450mm centre to centre and fixing of boards
to either side of frame work by 25mm drive
all screws on studs, floor and ceiling
channels at the spacing of 300mm centre to
centre , including jointing and finishing
to a flush finish with recommended jointing
compound , jointing tape, joint finisher
and two coats of primer suitable for board
as per manufacture's specification and all
complete - 75mm overall thickness partition
with 12.5mm thick double skin plain gypsum
board conforming to IS:2095:part I

9.105.3 Providing and fixing partition upto ceiling sqm 1,308.88


height consisting of G.I.frame and required
board including providing and fixing of
frame work made of special section power
pressed / role form G.I.sheet with zinc
coating of grade 175 consisting of floor
and ceiling channel 50mm wide having equal
flanges of 32mm and 0.5mm thick fixed to
the floor and ceiling at the spacing of
610mm centre to centre with dash fastener
of 12.5mm dia -meter, 40mm length and the
studs 48mm wide having one flange of 34mm
and other flange 36mm and 0.50mm thick
fixed vertically within flanges of floor
and ceiling channel and placed at a spacing
of 610mm centre to centre by 6mm dia bolts

Puducherry Region
9. Wood Work
Page No.: 219
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and nuts at both ends of partition fixed


flush to wall with rawl plugs at spacing
450mm centre to centre and fixing of boards
to either side of frame work by 25mm drive
all screws on studs, floor and ceiling
channels at the spacing of 300mm centre to
centre , including jointing and finishing
to a flush finish with recommended jointing
compound , jointing tape, joint finisher
and two coats of primer suitable for board
as per manufacture's specification and all
complete - 66mm over all thickness
partition with 8mm thick double skin
calcium silicate board made with
calcareous & siliceous materials reinforced
with cellulose fiber manufactured through
autoclaving process to give stable
crystalline structure . Non combustible &
spread of flame (as per BS standard 476
part IV & VII), water, termite & fungus
resistant, compressive strength 225kg /
sq.cm, bending strenght 100kg / sqcm.

9.105.4 Providing and fixing partition upto ceiling sqm 1,405.34


height consisting of G.I.frame and required
board including providing and fixing of
frame work made of special section power
pressed / role form G.I.sheet with zinc
coating of grade 175 consisting of floor
and ceiling channel 50mm wide having equal
flanges of 32mm and 0.5mm thick fixed to
the floor and ceiling at the spacing of
610mm centre to centre with dash fastener
of 12.5mm dia -meter, 40mm length and the
studs 48mm wide having one flange of 34mm
and other flange 36mm and 0.50mm thick
fixed vertically within flanges of floor
and ceiling channel and placed at a spacing
of 610mm centre to centre by 6mm dia bolts
and nuts at both ends of partition fixed
flush to wall with rawl plugs at spacing
450mm centre to centre and fixing of boards
to either side of frame work by 25mm drive
all screws on studs, floor and ceiling
channels at the spacing of 300mm centre to
centre , including jointing and finishing
to a flush finish with recommended jointing
compound , jointing tape, joint finisher
and two coats of primer suitable for board
as per manufacture's specification and all
complete - 66mm overall thickness partition
using 8mm thick double skin non - asbestos

Puducherry Region
9. Wood Work
Page No.: 220
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

multipurpose cement board reinforced with


cellulose fibre manufactured through
autoclaving process (high pressure steam
cured) as per IS:14862, non combustible,non
ignitable , fire propagation index and
surface spread of flame (as per BS 476 part
IV,V,VI and VII), moisture , termite &
fungus resistant , with suitable fibre
cement screw

9.106.1 Providing and fixing PTMT handles with each 40.87


necessary screws etc.complete - 125x34x24
mm weighing not less than 23 gms

9.106.2 Providing and fixing PTMT handles with each 44.49


necessary screws etc.complete - 150x34x24
mm weighing not less than 26 gms

9.107.1 Providing and fixing PTMT butt hinges with each 62.19
necessary screws etc.complete.- 75x60x10mm
fitted with 5.5mm dia M.S.bright bar rod
weighing not less than 34gms

9.107.2 Providing and fixing PTMT butt hinges with each 79.79
necessary screws etc.complete.- 100x75x10
mm fitted with 5.5mm dia MS bright bar rod
weighing not less than 53gms

9.108.1 Providing and fixing PTMT tower bolts with each 86.81
12mm one piece rod inside and necessary
screws etc., complete - 152x42x18mm
weighing not less than 60gms

9.108.2 Providing and fixing PTMT tower bolts with each 104.53
12mm one piece rod inside and necessary
screws etc., complete - 202 x 42 x18mm
weighing not less than 78 gms

9.109 Providing and fixing PTMT door catcher of each 33.88


length 72mm and dia .of 42mm with suitable
washers weighing not less than 33 gms

9.110P Providing and fixing bamboo jaffery / sqm 5,878.76


fencing consisting of superior quality 25mm
dia (average) half cut bamboo placed
vertically and fdixed together with three
numbers horizontal running members of padak
wood in scantling of section 50x25mm fixed
with nails and G.I wire to existing support
complete

9.110V Providing and fixing bamboo jaffery / sqm 5,862.78

Puducherry Region
9. Wood Work
Page No.: 221
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

fencing consisting of superior quality 25mm


dia (average) half cut bamboo placed
vertically and fdixed together with three
numbers horizontal running members of
vengai wood in scantling of section 50x25mm
fixed with nails and G.I wire to existing
support complete

9.111.1B Providing and fixing wooden moulded corner metre 411.62


beading of triangular shape to the junction
of panelling etc.with iron screws, plugs
and priming coat on unexposed surface
etc.complete Burma teak wood - 50x50mm
(base and height)

9.112 Providing and fixing teak wood lipping / metre 56.36


moulded beading or Taj beading of size
18x5mm fixed with wooden adhesive like
fevicol etc and screws / nails on the edges
of the prelaminated particle board .

9.113 Providing and fixing bright finished 100mm each 361.15


mortice lock with 6 levers without pair of
handles for aluminium door with necessary
screws etc complete (best make of approved
quality)

9.114.1 Providing and fixing magnetic catcher in each 32.01


cupboard / ward robe shutters including
fixing with necessary screws etc.complete
(Best make of approved quality - triple
strip vertical type.

9.114.2 Providing and fixing magnetic catcher in each 25.38


cupboard / ward robe shutters including
fixing with necessary screws etc.complete
(Best make of approved quality - double
strip (horizontal type)

9.115 Providing and fixing powder coated set 153.74


telescopic drawer channels 300mm long with
necessary screws etc.complete

9.116 Providing and fixing sliding arrangement in each 12.81


racks / cupboard / cabinets shutter by P/F
stainless steel rollers to run inside C or
E aluminium channel section (the payment of
C or E channel shall be made separately)

9.117.1 Providing and fixing factory made UPVC door metre 179.02
frame made of UPVC extruded, section having
an overall dimension , as below (tolerance

Puducherry Region
9. Wood Work
Page No.: 222
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

+/- 1mm) with wall thickness 2.0mm +/- 02mm


. Corners of the door frame to be jointed
with galvanized brackets and stainless
steel screws, joint mitred and plastic
wilded . The hinge side vertical of the
frames reinforced by galvanized M.S.tube of
size 19x19mm and 1 mm +/-0.1mm wall
thickness and 3 nos.stainless steel hinges
fixed to the frame complete as
manufacturers specification - Extruded
section Profile size 48x40mm.

9.117.2 Providing and fixing factory made UPVC door metre 203.13
frame made of UPVC extruded, section having
an overall dimension , as below (tolerance
+/- 1mm) with wall thickness 2.0mm +/- 02mm
. Corners of the door frame to be jointed
with galvanized brackets and stainless
steel screws, joint mitred and plastic
wilded . The hinge side vertical of the
frames reinforced by galvanized M.S.tube of
size 19x19mm and 1 mm +/-0.1mm wall
thickness and 3 nos.stainless steel hinges
fixed to the frame complete as
manufacturers specification - Extruded
section Profile size 42x50mm.

9.118.1 Providing and fixing to existing door sqm 2,168.44


frames - 24mm thick factory made PVC door
shutters made of styles and rails of a UPVC
hollow section of size 59x24mm and wall
thickness 2mm +or- 0.2mm with inbuilt
edging on both sides. The styles and rails
mitred and jointed at the corners by means
of M.S.galvanised / plastic brackets of
size 75x220 mm having wall thickness 1.0mm
and stainless steel screws. The styles of
the shutter reinforced by inserting
galvanised M.S.tube of size 20x20mm and 1mm
+or-0.1mm wall thickness .The lock rail
made up of 'H' section , a UPVC hollow
section of size 100x24 mm and 2mm + or -
0.2mm wall thickness fixed to the shutter
styles by means of plastic / galvanised
M.S.'U' cleats. The shutter frame filled
with a UPVC multi - chambered single panel
of size not less than 620 mm, having over
all thickness of 20mm and 1mm + or -0.1mm
wall thickness. The panels filled
vertically and tie bar at two places by
inserting horizontally 6mm galvanised
M.S.rod and fastened with nuts and

Puducherry Region
9. Wood Work
Page No.: 223
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

washers,complete as per manufacturer's


specification .(For W.C. and bathroom door
shutter)

9.118.2 Providing and fixing to existing door sqm 2,964.16


frames - 30mm thick factory made (polyvinyl
chloride) PVC door shutters made of styles
and rails of a UPVC profile section of size
30x60mm and wall thickness 2mm +or- 0.2mm
with inbuilt decorative moulding edging on
one side. The styles and rails with plastic
brackets of size 75x220mm metre and welded
at the corners. The - stiles of the shutter
reinforced by inserting galvanized M.S.tube
of size 25x20mm and 1mm + or - 0.1mm wall
thickness. The lock rail made up of 'H'
section , a UPVC profile section of size
30mm x 100mm and 2mm + or - 0.2 wall
thickness welded to the shutter style with
a UPVC profile section single panel of size
not less than 620mm,having overall
thickness of 20mm and 1mm + or - 0.1mm wall
thickness with 20mm panel beading of
suitable size / glass (4mm thick plain
glass) / louver section, louver frame of
suitable size, as per manufactures
specification. (For W.C. and bathromm door
shutter)

9.118.3 Providing and fixing to existing door sqm 2,964.16


frames - 25mm thick PVC flush door shutters
upto 737mm width of colour and shade as
approved made out of a one piece Multi
chamber extruded PVC section of the size of
762mm x 25mm or less as per requirement
with an average wall thickness of 1mm + or
- 0.3mm.PVC foam end cap of size 23x10mm
are provided on both vertical edges to
ensure the overall thickness of 25mm.An MS
tube having dimensions 19mm x19mm is
inserted along the hinge side of the
door.Core of the door shutter should be
filled with High density polyurethane foam.
The top & bottom edges of the shutter are
covered with an end -cap of the size 25mm x
11mm.Door shutter shall be reinforced with
special polymeric reiforcements as per
manufactures' specification and drawing to
take up necessary hardware and fixtures.
Stickers indicating the locations of
hardware will pasted at appropriate places.

Puducherry Region
9. Wood Work
Page No.: 224
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.119 Providing and fixing factory made P.V.C. metre 421.47


door frame of size 50x47mm with a wall
thickness of 5mm, made out of extruded 5mm
rigid PVC foam sheet mitred at corners and
joined with 2nos.of 150mm long brackets of
15x15mm M.S.square tube, the vertical door
profiles to be reinforced with 19x19mm
M.S.square tube of 19 gauge,EPDM rubber
gasket weather seal to be provided through
out the frame.The door frame to be fixed to
the wall using M.S.screws of 65/100mm size
complete as per manufacturers specification
.

9.120.1 Providing and fixing to existing door sqm 2,512.00


frames - 30mm thick factory made solid
panel PVC door shutter consisting of frame
made out of M.S.tubes of 19 gauge thickness
and size of 19mm x 19mm for stiles, top &
bottom rails . M.S.frame shall have a coat
of steel primers of approved make and
manufacture M.S.frame covered with 5mm
thick heat moulded PVC 'C channel of size
30mm thickness, 110mm width out of which
90mm shall be flat and 20mm shall be
tapered in 45 drgree angle on either side
forming stiles; and 5mm thick , 110mm wide
PVC sheet out of which 90mm shall be flat
and 20mm shall be tapered on the inner side
to form top and bottom rail and 130mm wide
PVC sheet out of which 90mm shall be flat
and 20mm shall be tapered on both sides to
form lock rail.Top bottom and lock rails
shall be provided either side of the panel.
10mm(5mmx 2) thick , 20mm wide cross PVC
sheet shall be provided as gap insert for
top rail & bottom rail. Panelling of 5mm
thick PVC sheet to be fitted in the
M.S.frame welded/sealed to the stiles &
rails with 7mm (5mm + 2mm) thick x 15mm
wide PVC sheet bending on inner side , and
joined together with solvent cement
adhesive. An additional 5mm thick PVC strip
of 20mm width is to be stuck on the
interior side of the 'C channel using PVC
solvent adhesive etc.complete manafactures
specification & drawing.

9.120.2 Providing and fixing to existing door sqm 3,066.59


frames - 30mm thick factory made solid both
side prelam panel PVC door shutter
consisting of frame made out of M.S.tubes

Puducherry Region
9. Wood Work
Page No.: 225
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of 19 gauge thickness and size of 19mm x


19mm for stiles, top & bottom
rails.M.S.frame shall have a coat of steel
primers of approved make and manufacture.
M.S. frame covered with 5mm thick heat
moulded prelam PVC 'C channel of size 30mm
thickness, 70mm width out of which 50mm
shall be flat and 20mm shall be tapered in
45 degree angle on either side forming
stiles; and 5mm thick , 95mm wide PVC sheet
out of which 75mm shall be flat and 20mm
shall be tapered in 45 degree on the inner
side to form top and bottom rail and 115mm
wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered on both
sides to form lock rail. Top, button and
lock rails shall be provided either side of
the panel. 10mm (5mmx2) thick, 20mm wide
cross PVC sheet be provided as gap insert
for top rail & bottom rail, panelling of
5mm thick both side prelam PVC sheet to be
fitted in the M.S.frame welded / sealed to
the stiles & rails with 7mm (5mm+2mm) thick
x 15mm wide PVC sheet beading on inner side
, and joined together with solvent cement
adhesive. An additional 5mm thick PVC strip
of 20mm width is to be stuck on the
interior side of the 'C channel using PVC
solvent adhesive etc.complete manufactures
specification & drawing

9.121 Providing and fixing Fiber glass reinforced metre 496.22


Plastic (FRP) door frames of cross section
90mm x 45mm having single rebate of 32mm x
15mm to receive shutter of 30mm thickness.
The laminate shall be molded with fire
resistant grade unsaturated polyester resin
and chopped mat. Doorframe laminate shall
be 2mm thick and shall be filled with
suitable wooden block in all the three
legs. The frame shall be covered with
fibreglass from all sides. MS stay shall be
provided at the bottom to steady the frame

9.122.1 Providing and fixing to existing door sqm 2,741.07


frames - 30mm thick glass fibre reinforced
plastic (FRP) panelled door shutter of
required colour and approved brand and
manufacture, made with fire - retardant
grade unsaturated polyester resin, moulded
to 3 mm thick FRP laminate for forming
hollow rails and styles, with wooden frame

Puducherry Region
9. Wood Work
Page No.: 226
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and suitable blocks of seasoned wood inside


at required places for fixing of fittings,
cast monolithically with 5mm thick FRP
laminate for panels conforming to TADS 6:
1993 and / or IS : 14856 - 2000 including
fixing to frames.

9.122.2 Providing and fixing to existing door sqm 3,603.10


frames - 30mm thick fibreglass reinforced
plastice (F.R.P) flush door shutter in
different plain and wood finish made with
fire retardant grade unsaturated polyster
resin, moulded to 3mm thick FRP laminate
all around, with suitable wooden blocks
inside at required places for fixing of
fittings and polyurethane foam (PUF) /
polystyrene foam to be used as filler
material throughout the hollow panel ,
casted monolithically with testing
parameters of F.R.P. laminate conforming to
table - 3 of IS:14856:2000,complete.

9.123 Providing and fixing factory made door metre 363.60


frame (single rebate) made of solid PVC
foam profile with homogenous fine celluar
structure having smooth outer integral skin
having 60mm width & 30mm thickness and
shall be fixed to wall -using 100x8 sheet
metal CSK screws.

9.124 Providing and fixing 28mm thick door sqm 3,006.31


shutter made of solid PVC foam profile with
homogenous fine cellular structure having
smooth outer integral skin having 71mm
width & 28mm thick as vertical & horizontal
styles. Joints are made using solvent
adhesive and GI 'C sections (39mm x 19mm x
0.6mm thick) or MS pipe (40mm x 20mm)
stiffener frame insert & telescopic
polymeric 'L' corners. The panel shall be
filled with 3mm thick high - pressure
compact laminate as per manufacturer's
specifications . Cover moulding shall be
provided for covering fixing screws and
elegant look. (For W.C. bathroom door
shutter)

9.125 Providing and fixing PVC rigid foam sheet sqm 793.37
1mm thick on existing door shutters
(Bathroom and WC doors) using synthetic
rubber based adhesive

Puducherry Region
9. Wood Work
Page No.: 227
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.126.1 Providing and fixing 12mm thick panelling sqm 1,936.12


or panelling and glazing in panelled or
panelled and glazed shutters for doors,
windows and clerestory windows (area of
opening for panel inserts excluding portion
inside grooves or rebates to be
measured).Panelling for panelled or
panelled and glazed shutters 25mm to 40mm
thick - marine plywood conforming to IS :
710

9.126.2 Providing and fixing 12mm thick panelling sqm 1,841.10


or panelling and glazing in panelled or
panelled and glazed shutters for doors,
windows and clerestory windows (area of
opening for panel inserts excluding portion
inside grooves or rebates to be
measured).Panelling for panelled or
panelled and glazed shutters 25mm to 40mm
thick - Fire retardant plywood conforming
to IS:5509

9.127.1 Providing & fixing decorative high pressure sqm 912.61


laminated sheet of plain / wood grain in
gloss /matt/suede finish with high density
protective surface layer and reverse side
of adhesive bonding quality conforming to
IS : 2046 type S including cost of adhesive
of approved quality - 1.5mm thick

9.127.2 Providing & fixing decorative high pressure sqm 779.99


laminated sheet of plain / wood grain in
gloss /matt/suede finish with high density
protective surface layer and reverse side
of adhesive bonding quality conforming to
IS : 2046 type S including cost of adhesive
of approved quality - 1.0mm thick

9.128 Providing and fixing factory made sqm 5,624.81


fibreglass reinforced plastics (F.R.P)
chajja 4mm thick of required colour, size
and design made by resin transfer moulding
(RTM) machine technology , resulting in
void free compact laminate in single piece,
having smooth gradual slope curvature for
easy drainage of water and duly reinforced
by 50x2mm thick M.S.flat with 12mm in built
hole for grouting on the existing wall
along with the flanges duly inserted and
sealed in the wall complete in one single
piece casted monolithically, including all
necessary fittings. The FRP Chajja should

Puducherry Region
9. Wood Work
Page No.: 228
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

be manufactured using unsaturated polyester


resin as per IS: 11551 complete with
protective gelcoat U/V coating on top for
complete resistance from the extreme of
temperature, weather & sunlight.

9.129 Providing and fixing cup board shutters sqm 1,734.42


25mm thick, with prelaminated flat pressed
three layer particle board or graded wood
particle board IS : 12823 marked exterior
grade (grade 1 type II) having one side
decorative lamination and other side
balancing lamination including II nd class
teak wood lipping of 25mm wide x 12 mm
thick with necessary screws and bright
finished stainless steel piano hinges
complete .

9.130.1 Providing and fixing cup board shutters sqm 1,806.76


with 25mm thick veneered particle board IS
: 3097 marked exterior grade (grade I) of
approved make including II nd class teak
wood lipping of 25mm wide x 12mm thick with
necessary screws and bright finished
stainless steel piano hinges complete -
with decorative veneering on one side and
commercial veneering on other side.

9.130.2 Providing and fixing cup board shutters sqm 1,601.80


with 25mm thick veneered particle board IS
: 3097 marked exterior grade (grade I) of
approved make including II nd class teak
wood lipping of 25mm wide x 12mm thick with
necessary screws and bright finished
stainless steel piano hinges complete -
with non decorative veneering on both
sides.

9.131.1 Providing and fixing factory made sqm 1,895.28


prelaminated particle board flat pressed
three layer or graded wood particle board
with one side decorative finish and other
side balancing lamination conforming to
IS:12823 grade 1 type II, of approved
design , and edges sealed with water
resistant paint and lipped with aluminium
'U' type edge beading alround the shutter,
including fixing with angle cleat, grip
strip, cadmium plated steel screws
including fixing of aluminium hinges
100x63x4mm etc.complete as per
architectural drawing (Cost of 'U' beading

Puducherry Region
9. Wood Work
Page No.: 229
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and hinges will be paid for


separately).-25mm thick

9.132 Providing and fixing aluminium U beading of kg 566.42


required size to prelaminated / flush door
shutter including fixing etc.complete

9.133.1.1 Providing and fixing , in position sqm 1,066.69


concealed G.I.section for wall panelling
using board of required thickness fixed on
the 'W profile (0.55mm thick) having a
knurled web of 51.55mm and two flanges of
26mm each with lips of 10.55mm placed @
610mm c/c in perimeter channel having one
flange of 20mm and another flange of 30mm
with thickness of 0.55mm and web of length
27mm. Perimeter channel is fixed on the
floor and the ceiling with the nylon
sleeves @ 610mm C/C with fully threaded
self - tapping drive all screws. Board is
fixed to the 'Wprofile with 25mm
countersunk ribbed head screws @ 200mm C/C,
all complete as per the drawing, the joints
of the boards are finished with specially
formulated jointing compound and 48mm wide
fiber tape to provide seamless finish.
Tapered edge calcium silicate board made
with calcareous & siliceous materials
reinforced with cellulose fiber
manufactured through autoclaving process to
give stable crystalline struture, Non
combustible & spread of flame (as per BS
standard 476 Part IV & VII), water ,
termite & fungus resistant, compressive
strength 225kg / sq.cm, bending strength
100kg/sq.cm - 10mm thick

9.133.2.1 Providing and fixing , in position sqm 886.26


concealed G.I.section for wall panelling
using board of required thickness fixed on
the 'W profile (0.55mm thick) having a
knurled web of 51.55mm and two flanges of
26mm each with lips of 10.55mm placed @
610mm c/c in perimeter channel having one
flange of 20mm and another flange of 30mm
with thickness of 0.55mm and web of length
27mm. Perimeter channel is fixed on the
floor and the ceiling with the nylon
sleeves @ 610mm C/C with fully threaded
self - tapping drive all screws. Board is
fixed to the 'Wprofile with 25mm
countersunk ribbed head screws @ 200mm C/C,

Puducherry Region
9. Wood Work
Page No.: 230
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

all complete as per the drawing, the joints


of the boards are finished with specially
formulated jointing compound and 48mm wide
fiber tape to provide seamless finish. Non
asbestos multipurpose cement board
reinforced with cellulose fibre
manufactured through auto claving process
(high pressure steam cured) as per IS 14862
non combustible, non ignitable, fire
propagation index and surface spread of
flame (as per BS 476 part IV, V, VI, and
VII) moisture, termite & fungus resistant
with suitable fibre cement screw - 8mm
thick

9.133.3.1 Providing and fixing, in position concealed sqm 774.83


G.I section for wall panelling using board
of required thickness fixed on the 'W
profile (0.55mm thick) having a knurled web
of 51.55mm and two flanges of 26mm each
with lips of 10.55 mm placed @ 610mm C/C in
perimeter channel having one flange of 20mm
and another flange of 30mm with thickness
of 0.55mm and web of length 27mm.Perimeter
channel is fixed on the floor and the
ceiling with the nylon sleeves @ 610mm C/C
with fully threaded self - tapping drive
all screws. Board is fixed to the 'W'
profile with 25mm countersunk ribbed head
screws @ 200 mm C/C , all complete as per
the drawing , the joints of the boards are
finished with specially formulated jointing
compound and 48mm wide fiber tape to
provide seamless finish - gypsum board
conforming to IS:2095 - 1996 : Part -I -
12.5mm thick

9.134.1 Providing and fixing of 65mm Godrej Navtal no 434.03


lock of 6 levers etc complete

9.134.2 Providing and fixing of 65mm Godrej Navtal no 632.96


lock of 7 levers with 3 keys etc complete

Puducherry Region
10. Steel Work
Page No.: 231
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

10.1 Structural steel work in single section kg 65.97


fixed with or without connecting plate
including cutting,hoisting, fixing in
position and applying coat of approved
steel primer all complete.

10.2 Structural steel work riveted,bolted or kg 77.40


welded in built up sections, trusses and
framed work, including cutting,
hoisting,fixing in position and applying a
priming coat of approved steel primer all
complete.

10.3 Providing and fixing in position sqm 5,312.31


collapsible steel shutters with vertical
channels 20x10x2mm and braced with flat
iron diagnals 20x5mm size with top and
bottom rail of T-iron 40x40x6mm with 40mm
dia steel pulleys complete with bolts,
nuts, locking arrangement, stoppers,
handles, including applying a priming coat
of approved steel primer.

10.4 Providing and fixing 1mm thick M.S. Sheet sqm 3,442.90
sliding - shutters with frame and diagnal
braces of 40x40x6mm angle 3mm M.S. gusset
plates at junction and corners 25mm dia
pulley, 40X40X6mm angle and T-iron guide at
the top and bottom respectively including
applying a priming coat of approved steel
primer.

10.5.1 Providing and fixing 1mm thick M.S. sheet sqm 3,031.93
door with frame of 40X40X6mm angle iron and
3mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete,
including applying a priming coat of
approved steel primer. Using M.S. angles
40X40X6mm for diagonal braces.

10.5.2 Providing and fixing 1mm thick M.S. sheet sqm 2,940.60
door with frame of 40X40X6mm angle iron and
3mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete,
including applying a priming coat of
approved steel primer. Using flats 30X6mm
for diagonal braces and central cross
piece.

10.6.1 Supplying and fixing rolling shutters of sqm 3,447.42


approved make, made of required size M.S.
laths interlocked together through their

Puducherry Region
10. Steel Work
Page No.: 232
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

entire length and jointed together at the


end by end locks mounted on specially
designed pipe shaft with brackets, side
guides and arrangements for inside and
outside locking with push and pull
operation complete including the cost of
providing and fixing necessary 27.5cm long
wire springs grade No.2 and M.S. top cover
of required thickness for rolling shutters.
80X1.25mm M.S. laths with 1.25mm thick top
cover

10.6.2 Supplying and fixing rolling shutters of sqm 3,166.10


approved make, made of required size M.S.
laths interlocked together through their
entire length and jointed together at the
end by end locks mounted on specially
designed pipe shaft with brackets, side
guides and arrangements for inside and
outside locking with push and pull
operation complete including the cost of
providing and fixing necessary 27.5cm long
wire springs grade No.2 and M.S. top cover
of required thickness for rolling shutters.
80X1.20mm M.S. laths with 1.20mm thick top
cover

10.6.3 Supplying and fixing rolling shutters of sqm 3,021.43


approved make, made of required size M.S.
laths interlocked together through their
entire length and jointed together at the
end by end locks mounted on specially
designed pipe shaft with brackets, side
guides and arrangements for inside and
outside locking with push and pull
operation complete including the cost of
providing and fixing necessary 27.5cm long
wire springs grade No.2 and M.S. top cover
of required thickness for rolling shutters.
80X0.90mm M.S. laths with 0.90mm thick top
cover

10.7 Providing and fixing ball bearing for No 370.23


rolling shutters.

10.8.1 Extra for providing mechanical device chain sqm 420.36


and crank operation for operating rolling
shutters. Exceeding 10.00sqm and upto
16.80sqm in the area.

10.8.2 Extra for providing mechanical device chain sqm 480.65


and crank operation for operating rolling

Puducherry Region
10. Steel Work
Page No.: 233
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

shutters. Exceeding 16.80sqm in area.

10.9 Extra for providing grilled rolling sqm 231.48


shutters manufacture out of 8mm dia M.S.
bar instead of laths as per design approved
. (area of grill to be measured)

10.10 Fixing standard steel glazed doors, windows Kg 52.96


and ventilators in walls with 15X3mm lugs
10cm long embedded in cement concrete
blocks 15X10X10cm of 1:3:6 (1cement : 3
Coarse sand : 6 graded stone aggregate 20mm
nominal size) or with wooden plugs and
screws or rawl plugs and screws or with
fixing clips or with bolts and nuts as
required, including fixing of float glass
panes with glazing clips and special
metal-sash putty of approved make or metal
beading with screws (only steel windows
with lugs, glass panes cut to size and
glazing clips or metal beading with screws,
shall be supplied by department free of
cost).

10.11 Providing and fixing factory made ISI Kg 265.85


marked steel glazed doors , windows and
ventilators side/top/centre hung with
beading and all members such as K11B and
K12B etc. complete of standard rolled steel
sections, joints mitred and flash butt
welded and sash bars tenoned and rivetted
with 15X3mm lugs, 10cm long embeded in
cement concrete blocks 15X10X10cm of 1:3:6
(1 cement : 3 coarse sand :6 graded stone
aggregate 20mm nominal size) or with wooden
plugs and screws or rawl plugs and screws
or with fixing clips or with bolts and nuts
as required, including providing and fixing
of hinges, pivots,float glass panes with
glazing clips and special metal sash putty
of approved make and a priming coat of
approved steel primer excluding the cost of
metal beading and other fittings except
necessary hinges or pivots complete as per
approved design.

10.12 Extra for providing and fixing steel metre 57.96


beading of approved shape and section with
screws instead of glazing clips and metal
sash putty in steel doors, windows,
ventilators and composite units.

Puducherry Region
10. Steel Work
Page No.: 234
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

10.13 Providing and fixing T-iron frames for Kg 83.14


doors, windows and ventilators or mild
steel Tee-sections, joints mitred and
welded with 15X3mm lugs, 10cm long embeded
in cement concrete blocks
15X10X10cm of 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate
20mm nominal size) or with wooden
plugs and screws or with dash fastener or
rawl plugs and screws or with fixing clips
or with bolts and nuts as required
including fixing of necessary butt hinges
and screws and applying a priming coat of
approved steel primer.

10.14.1 Providing and fixing pressed steel door metre 335.99


frames conforming to IS:4351 manufacture
from commercial mild steel sheet of 1.25mm
thickness including hinges jamb, lock jamb,
bead and if required angle threshold of
mild steel angle of section 50X25mm, or
base ties of 1.25mm pressed mild steel
welded or rigidly fixed together by
mechanical means, adjustable lugs with
split end tail to each jamb including steel
butt hinges 2.5mm thick with mortar guards,
lock strike-plate and shock absorbers as
specified and applying a coat approved
steel primer after pre-treatment of the
surface : profile B

10.14.2 Providing and fixing pressed steel door metre 355.28


frames conforming to IS:4351 manufacture
from commercial mild steel sheet of 1.25mm
thickness including hinges jamb, lock jamb,
bead and if required angle threshold of
mild steel angle of section 50X25mm, or
base ties of 1.25mm pressed mild steel
welded or rigidly fixed together by
mechanical means, adjustable lugs with
split end tail to each jamb including steel
butt hinges 2.5mm thick with mortar guards,
lock strike-plate and shock absorbers as
specified and applying a coat approved
steel primer after pre-treatment of the
surface : profile C

10.14.3 Providing and fixing pressed steel door metre 397.48


frames conforming to IS:4351 manufacture
from commercial mild steel sheet of 1.25mm
thickness including hinges jamb, lock jamb,
bead and if required angle threshold of

Puducherry Region
10. Steel Work
Page No.: 235
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

mild steel angle of section 50X25mm, or


base ties of 1.25mm pressed mild steel
welded or rigidly fixed together by
mechanical means, adjustable lugs with
split end tail to each jamb including steel
butt hinges 2.5mm thick with mortar guards,
lock strike-plate and shock absorbers as
specified and applying a coat approved
steel primer after pre-treatment of the
surface: profile E

10.15 Providing and fixing M.S. tubular frames Kg 151.47


for doors, windows,ventilators and cupboard
with L-type sections made of 1.60mm thick
M.S.sheet, joints mitred and welded and
grinded finish, with profiles of required
size with 15X3mm lugs 10cm long embeded in
cement concrete blocks 15X10X10cm of 1:3:6
(1cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size) or with wooden
plugs and screws or rawl plugs and screws
or with fixing clips or bolts and nuts as
required including fixing of necessary butt
hinges and screws and applying a priming
coat of approved steel primers.

10.16.1 Steel work in built up tubular trusses Kg 114.12


including cutting, hoisting fixing in
position and applying a priming coat of
approved steel primer welded and bolted
including special shaped washers etc.
complete. Hot finished welded type tubes.

10.16.2 Steel work in built up tubular trusses Kg 121.72


including cutting, hoisting fixing in
position and applying a priming coat of
approved steel primer welded and bolted
including special shaped washers etc.
complete. Hot finished seamless type tubes.

10.16.3 Steel work in built up tubular trusses Kg 128.05


including cutting, hoisting fixing in
position and applying a priming coat of
approved steel primer welded and bolted
including special shaped washers etc.
complete. Electric resistance or induction
butt welded tubes.

10.17 Providing and fixing M.S. fan clamp type I Each 128.39
or II of 16mm dia M.S. bar bent to shape
with hooked ends in R.C.C. slabs, beams
during laying including painting the

Puducherry Region
10. Steel Work
Page No.: 236
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

exposed portion of loop, all as per


standard design complete.

10.18 Providing and fixing circular/hexogonal each 137.78


cast iron or M.S. sheet box for ceiling fan
clamp of internal dia 140mm, 73mm height,
top lid of 1.5mm thick M.S. sheet with its
top surface backed for propoer bonding, top
lid shall be screwed in to the cast iron/
M.S. sheet box by means of 3.3mm dia. Round
headed screws, one lock at the corners.
Clamp shall be made of 12mm dia M.S. bar
bent to shape as per standard drawing.

10.19 Providing and fixing M.S. round holding Kg 72.89


down with nuts and washer plates completes.

10.20 Providing and fixing bolts including nuts Kg 104.60


and washers complete.

10.21 Providing and fixing M.S. rivets of sizes Kg 142.60


in position.

10.22 Welding by gas or electric plant including cm 1.61


transportation of plant at site etc.
complete.

10.23 Providing and fixing bright finished brass Kg 464.04


casement window fasterners or peg stays to
windows/ventilators with necessary welding
and machine screws etc. complete.

10.24 Providing and fixing 14mm bright finished Each 71.11


brass spring catch to steel centre hung
ventilators with necessary welding and
machine screws etc. complete.

10.25.1 Steel work welded in built up Kg 74.70


section/framed work including cutting,
hoisting, fixing in position and applying a
priming coat of approved steel primer using
steel etc. as required. In stringers,
treads, landing etc.of stair case including
use of chequered plate wherever required
all complete.

10.25.2 Steel work welded in built up section/ Kg 88.18


framed work including cutting
hoisting,fixing in position and applying a
priming coat of approved steel primer using
structural steel etc. as required. In
grating, frames, guard bar, ladder,

Puducherry Region
10. Steel Work
Page No.: 237
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

railings, brackets, gates and similar


works.

10.26.1 Providing and fixing hand rail of approved Kg 115.01


size by welding etc. to steel ladder
railing, balcony railing and staircase
railing including applying a priming coat
of approved steel primer. M.S. tube.

10.26.2 Providing and fixing hand rail of approved Kg 132.09


size by welding etc. to steel ladder
railing, balcony railing and staircase
railing including applying a priming coat
of approved steel primer. E.R.W. tube.

10.26.3 Providing and fixing hand rail of approved Kg 129.90


size by welding etc. to steel ladder
railing, balcony railing and staircase
railing including applying a priming coat
of approved steel primer. G.I. pipes.

10.27 Supplying and fixing of steel grill work of kg 81.33


m.s. angles,flats,squares and pipes
including cost of welding charges, fixing
in position in masonry walls with cement
concrete 1:2:4 (1 cement : 2 course sand :
4 graded stone aggregate 12.5mm nnominal
size) including one coat of priming coat
etc. complete.

10.28 Providing and fixing AISI 316 grade metre 11,805.60


stainless steel hand rail of 50mm (outer
dia 2mm wall thickness) stainless steel
pipe supported on 40x10mm stainless steel
flat at 600mm centre to centre to a toatl
height of 900mm from the finished floor
level and fixing 4nos .of 25mm (outer dia
and 2mm wall thickness) stainless steel
pipe as guard rails through the S.S.flat ,
with a base plate of size 100x100x8mm,
including fixing in the base plate in
concrete / wall surfaces by 4 nos of M-8
anchor fasteners and polishing the entire
stainless steel work to no.4 surface finish
as per the direction of engineer - in -
charge

Puducherry Region
11. Flooring
Page No.: 238
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.1.1 Brick on edge flooring with bricks of class Sqm. 667.92


designation 75 including cement slurry etc.
complete in cement mortar with F.P.S.
bricks. C.M. 1:4 (1 cement : 4 coarse sand)

11.1.2 Brick on edge flooring with bricks of class Sqm 621.66


designation 75 including cement slurry etc.
complete in cement mortar with F.P.S.
bricks. C.M. 1:6 (1 cement : 6 coarse sand)

11.2 Dry brick on edge flooring in required Sqm 487.37


pattern with bricks of class designation 75
on a bed of 12mm mud mortar including
filling joints with sand (with F.P.S.
bricks) complete.

11.3.1 Cement concrete flooring 1:2:4 (1 cement :2 Sqm 361.23


coarse sand : 4 graded stone aggregate)
finished with a floating coat of neat
cement including cement slurry, but
excluding the cost of nosing of steps etc.
complete. 40mm thick with 20mm nominal size
stone aggregate.

11.4 52mm thick cement concrete flooring with Sqm 559.69


concrete hardener topping under layer 40mm
thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate of
20mm nominal size) and top layer 12mm
thick cement hardener consisting of mix 1:2
(1 cement hardener mix : 2 graded stone
aggregate 6mm nominal size) by volume.
Hardening compound is mixed @ 2 litres per
50kg of cement or as per manufacturers
specifications. This includes cost of
cement slurry, but excluding the cost of
nosing of steps etc. complete.

11.5 62mm thick cement concrete flooring with Sqm 607.04


concrete hardener topping under layer 50mm
thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm
nominal size) and top layer 12mm thick
cement hardener consisting of mix 1:2 (1
cement hardener mix : 2 graded stone
aggregate 6mm nominal size) by volume.
Hardening compound is mixed @ 2 litre per
50kg of cement or as per manufactures
specifications. This includes cost of
cement slurry but excluding the cost of
nosing of steps etc. complete.

Puducherry Region
11. Flooring
Page No.: 239
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.6 Cement plaster skirting (upto 30cm height) Sqm 361.41


with cement mortar 1:3 (1 cement : 3 coarse
sand) finished with a floating coat of neat
cement. 18mm thick

11.7 Cement concrete pavement with 1:2:4 (1 Cum 6,527.21


cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) including
finishing complete.

11.8 Extra for making chequers of approved Sqm 37.58


pattern on cement concrete floors, steps,
landing, pavements etc.

11.9.1 40mm thick marble chips flooring, rubbed Sqm 589.73


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Dark shade
pigment with ordinary cement.

11.9.2 40mm thick marble chips flooring, rubbed Sqm 659.82


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Light shade
pigment with white cement.

11.9.3 40mm thick marble chips flooring, rubbed Sqm 625.70


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size

Puducherry Region
11. Flooring
Page No.: 240
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

laid in cement marble powder mix 3:1 (3


cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Medium shade
pigment with 50% white cement and 50%
ordinary cement.

11.9.4 40mm thick marble chips flooring, rubbed Sqm 620.03


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. White cement
without any pigement.

11.9.5 40mm thick marble chips flooring, rubbed Sqm 605.13


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Light shade
pigment with ordinary cement.

11.9.6 40mm thick marble chips flooring, rubbed Sqm 564.05


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. ordinary
cement without any pigment.

Puducherry Region
11. Flooring
Page No.: 241
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.10.1 40mm thick marble chips flooring, rubbed Sqm 607.92


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Dark shade pigment
with ordinary cement.

11.10.2 40mm thick marble chips flooring, rubbed Sqm 707.95


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with white cement.

11.10.3 40mm thick marble chips flooring, rubbed sqm 659.16


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Medium shade pigment
with 50% white cement and 50% ordinary
cement.

11.10.4 40mm thick marble chips flooring, rubbed Sqm 655.03


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,

Puducherry Region
11. Flooring
Page No.: 242
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

chocolate, grey, yellow or green marble


chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. White cement without
any pigment

11.10.5 40mm thick marble chips flooring, rubbed Sqm 623.34


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with ordinary cement.

11.10.6 40mm thick marble chips flooring, rubbed Sqm 649.35


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Ordinary cement
without any pigment

11.11.1 40mm thick marble chips flooring, rubbed Sqm 747.45


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Dark shade pigment

Puducherry Region
11. Flooring
Page No.: 243
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with ordinary cement.

11.11.2 40mm thick marble chips flooring, rubbed Sqm 887.60


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with white cement.

11.11.3 40mm thick marble chips flooring, rubbed Sqm 819.24


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Medium shade with 50%
white cement and 50% ordinary cement.

11.11.4 40mm thick marble chips flooring, rubbed Sqm 694.48


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. White cement without
any pigment.

11.11.5 40mm thick marble chips flooring, rubbed Sqm 764.55


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top

Puducherry Region
11. Flooring
Page No.: 244
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

layer 12mm thick with white, black,


chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with ordinary cement.

11.11.6 40mm thick marble chips flooring, rubbed Sqm 694.48


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Ordinary cement
without any pigment.

11.12.1.1 Marble chips skirting (upto 30cm height) Sqm 825.72


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand): Dark
shade pigement with ordinary cement.

11.12.1.2 Marble chips skirting (upto 30cm height) Sqm 895.81


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Light shade pigement with white cement.

11.12.1.3 Marble chips skirting (upto 30cm height) Sqm 861.69

Puducherry Region
11. Flooring
Page No.: 245
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

rubbed and polished to granolithic finish,


top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Medium shade pigement with white cement.

11.12.1.4 Marble chips skirting (upto 30cm height) Sqm 856.02


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
White cement without any pigment.

11.12.1.5 Marble chips skirting (upto 30cm height) Sqm 841.13


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Light shade pigment with ordinary cement.

11.12.1.6 Marble chips skirting (upto 30cm height) Sqm 800.04


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Ordinary cement without any pigment.

11.13.1 Providing and fixing glass strips in joints metre 35.59

Puducherry Region
11. Flooring
Page No.: 246
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of terrazo/ cement concrete floors. 40mm


wide and 4mm thick.

11.14 Extra for laying terrazo flooring on Sqm 39.79


staircase treads not exceeding 30cm in
width including cost of forming , nosing
etc.

11.15.1 Crazy marble stone flooring including Sqm 935.28


filling the gaps with light shade pigment
with white cement marble powder mixture (3
parts of white cement : 1 part of marble
powder) by weight in proportion of 4:7 (4
cement marble powder mix :7 white, black or
white and black marble chips of sizes from
1mm to 4mm nominal size by volume) and
under layer 25mm thick cement concrete
1:2:4 (1 cement :2 coarse sand : 4 graded
stone aggregate 12.5mm nominal size)
rubbing, polishing and cement slurry etc.
complete: 18mm thick crazy marble stone
white, black or as specified.

11.17 Extra if terrazo are laid in treads of Sqm 46.55


steps not exceeding 30 cm in width.

11.20.1 Chequered precast concrete tiles 22mm thick Sqm 1,101.30


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). Light shade using white
cement.

11.20.2 Chequered precast concrete tiles 22mm thick Sqm 1,040.24


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). Medium shade using 50%
white cement 50% grey cement.

11.20.3 Chequered precast concrete tiles 22mm thick Sqm 865.93


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). Dark shade using ordinary
cement.

Puducherry Region
11. Flooring
Page No.: 247
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.20.4 Chequered precast concrete tiles 22mm thick Sqm 812.40


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). ordinary cement without
any pigment.

11.21.1.1 Providing and fixing 10mm thick acid and / Sqm 1,278.71
or alkali resistant tiles of approved
make(Somany / Johnson / Durastone) and
colour using acid and / or alkali resisting
mortar bedding and joints filled with acid
and / or alkali resisting cement as per IS:
4457 complete. In flooring on a bed of
10mm thick mortar 1:4 (1 acid proof cement
: 4 coarse sand). Acid and alkali resistant
tile.

11.21.2.1 Providing and fixing 10mm thick acid and / Sqm 1,360.49
or alkali resistant tiles of approved make
(Somany / Johnson / Durastone) and colour
using acid and / or alkali resisting mortar
bedding and joints filled with acid and /
or alkali resisting cement as per IS: 4457
complete. In dado / skirting on 12mm thick
mortar 1:4 (1 acid proof cement : 4 coarse
sand). Acid and alkali resistant tile.

11.22.1.1 Tile work in skirting, risers of steps and Sqm 936.95


dado (upto 2m height) over 12mm thick bed
of cement mortar 1:3 (1 cement : 3 coarse
sand) and jointed with grey cement slurry @
3.3kg/sqm including pointing in white
cement mixed with pigment of matching shade
complete. Marble tiles (Polished) Raj
Nagar. 8mm thick.

11.23.1 Marble stone flooring with 18mm thick Sqm 2,665.09


marble stone (sample of marble shall be
approved) over 20mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Makrana white second
quality.

11.23.2 Marble stone flooring with 18mm thick Sqm 1,368.73


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse

Puducherry Region
11. Flooring
Page No.: 248
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sand) laid and jointed with grey cement


slurry including rubbing and polishing
complete with: Raj Nagar plain.

11.23.3 Marble stone flooring with 18mm thick Sqm 2,512.58


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Agaria white.

11.23.4 Marble stone flooring with 18mm thick Sqm 1,314.66


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Black zebra

11.23.5 Marble stone flooring with 18mm thick Sqm 1,567.00


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Udaipur green marble.

11.23.6 Marble stone flooring with 18mm thick Sqm 1,902.53


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Pink plain marble.

11.24 Extra for prefinished nosing to treads of metre 313.37


steps of marble stone.

11.25 Extra for marble stone flooring in treads Sqm 342.64


of steps and risers using single length up
to 2.00m.

11.26.1 Kota stone slab flooring over 20mm Sqm 1,363.91


(average) thick base laid over and jointed
with grey cement slurry mixed with pigment
to match the shade of the slab including
rubbing and polishing complete with base of
cement mortar 1:4 (1 cement : 4 coarse
sand). 25mm thick.

11.27 Kotta stone slabs 25mm thick in risers of Sqm 1,447.37

Puducherry Region
11. Flooring
Page No.: 249
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

steps, skirting, dado and pillars laid on


12mm (average) thick cement mortar 1:3 (1
cement : 3 coarse sand) and jointed with
grey cement slurry mixed with pigment to
match the shade of the slabs, including
rubbing and polishing complete.

11.28.1 40mm thick fine dressed stone flooring over Sqm 622.85
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) with joints
finished flush. Red sand stone

11.28.2 40mm thick fine dressed stone flooring over Sqm 762.10
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) with joints
finished flush. White sand stone.

11.29.1 40mm thick fine dressed stone flooring over Sqm 734.55
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) including
pointing with cement mortar 1:2 (1 cement :
2 stone dust) with an admixture of pigement
to match the shade of stone. Red sand
stone.

11.29.2 40mm thick fine dressed stone flooring over Sqm 873.80
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) including
pointing with cement mortar 1:2 (1 cement :
2 stone dust) with an admixture of pigement
to match the shade of stone. White sand
stone.

11.30.1 40mm thick rubbed stone flooring over 20mm sqm 794.87
(average) thick base of cement mortar 1:5
(1 cement : 5 coarse sand) with joints 3mm
thick, side buttered with cement mortar 1:2
(1 cement : 2 stone dust) admixed with
pigment to match the shade of stone and
pointing with same mortar. Red sand stone.

11.30.2 40mm thick rubbed stone flooring over 20mm Sqm 934.12
(average) thick base of cement mortar 1:5
(1 cement : 5 coarse sand) with joints 3mm
thick, side buttered with cement mortar 1:2
(1 cement : 2 stone dust) admixed with
pigment to match the shade of stone and
pointing with same mortar. White sand
stone.

11.31 Extra for pre finished nosing in treads of Sqm 108.51


steps of kota stone/ sand stone slab.

Puducherry Region
11. Flooring
Page No.: 250
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.32 Extra for kota stone / sand stone in treads Sqm 19.29
of steps and risers using single length
upto 1.05 metre

11.33.1B 25mm wooden planking, tongued and grooved sqm 7,099.47


in flooring including fixing with iron
screws complete with : Burma teak wood

11.33.2P 25mm wooden planking, tongued and grooved Sqm 4,006.49


in flooring including fixing with iron
screws complete with : Padak wood

11.33.2V 25mm wooden planking, tongued and grooved Sqm 4,006.49


in flooring including fixing with iron
screws complete with : Vengai wood

11.34B 38mm thick wood block flooring of Burma Sqm 10,962.83


teak wood laid over 25mm thick levelling
layer of cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate
10mm nominal size) to be paid separately
ocated with a thin layer of hot bitumen
(blown type) @ 2.45kg per sqm. Including
fixing blocks in position after dipping in
hot bitumen (blown type) upto half depth,
planed, levelled smooth and finished
complete.

11.35 Providing and fixing M.S. angle 50X50X5mm Kg 83.97


to act as nosing with lugs of M.S. flat
10X5mm 10cm long forked at end 60cm apart
(minimum three lugs to be provided)
including necessary welding and applying a
priming coat of approved primer on exposed
surface etc. complete.

11.36A Providing and fixing 1st quallity ceramic sqm 932.35


glazed wall tiles conforming to IS : 15622
(thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 200 x 300 mm as approved
in skirting, risers of steps and dados over
12mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3 kg per sqm.
Including pointing in white cement mixed
with pigment of matching shade complete. -
size 200x300mm

11.36B Providing and fixing 1st quallity ceramic sqm 1,006.51

Puducherry Region
11. Flooring
Page No.: 251
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

glazed wall tiles conforming to IS : 15622


(thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 300 x 450 mm as approved
in skirting, risers of steps and dados over
12mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3 kg per sqm.
Including pointing in white cement mixed
with pigment of matching shade complete. -
size 300x450mm

11.36C Providing and fixing 1st quallity ceramic sqm 1,191.87


glazed wall tiles conforming to IS : 15622
(thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 300 x 600 mm in skirting,
risers of steps and dados over 12mm thick
bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement
slurry @ 3.3 kg per sqm. Including pointing
in white cement mixed with pigment of
matching shade complete. - size 300x600mm

11.36D Providing and fixing commercial quallity sqm 821.13


ceramic glazed wall tiles conforming to IS
: 15622 (thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 200 x 300 mm as approved
in skirting, risers of steps and dados over
12mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3 kg per sqm.
Including pointing in white cement mixed
with pigment of matching shade complete. -
size 200x300mm

11.36E Providing and fixing commercial quallity sqm 870.57


ceramic glazed wall tiles conforming to IS
: 15622 (thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 300 x 450 mm as approved
in skirting, risers of steps and dados over
12mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3 kg per sqm.
Including pointing in white cement mixed
with pigment of matching shade complete. -

Puducherry Region
11. Flooring
Page No.: 252
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

size 300x450mm

11.36F Providing and fixing commercial quallity sqm 1,043.58


ceramic glazed wall tiles conforming to IS
: 15622 (thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 300 x 600 mm in skirting,
risers of steps and dados over 12mm thick
bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement
slurry @ 3.3 kg per sqm. Including pointing
in white cement mixed with pigment of
matching shade complete. - size 300x600mm

11.37 Providing and laying ceramic glazed floor Sqm 911.98


tiles 300X300mm (thickness to be specified
by the manufacture) of 1st quality
conforming to IS : 15622 of approved make
(Bell / Johnson / Regency / Somany / Naveen
/ Asian ) in colours such as white, ivory,
grey, fume red, brown laid on 20mm thick
cement mortar 1:4(1 cement : 4 Coarse sand)
including pointing the joints with white
cement and matching pigment etc., complete

11.37.1 Providing and laying ceramic glazed floor sqm 1,109.69


tiles 300X300mm (thickness to be specified
by the manufacture) of 1st quality
conforming to IS : 15622 of approved make
(Nitco / Kajaria ) in colours such as
white, ivory, grey, fume red, brown laid on
20mm thick cement mortar 1:4(1 cement : 4
Coarse sand) including pointing the joints
with white cement and matching pigment
etc., complete

11.37.2 Providing and laying ceramic glazed floor sqm 788.40


tiles 300X300mm (thickness to be specified
by the manufacture) of commercial quality
conforming to IS : 15622 of approved make
(Bell / Johnson / Regency / Somany / Naveen
/ Asian ) in colours such as white, ivory,
grey, fume red, brown laid on 20mm thick
cement mortar 1:4(1 cement : 4 Coarse sand)
including pointing the joints with white
cement and matching pigment etc., complete

11.37.3 Providing and laying ceramic glazed floor sqm 986.13


tiles 300X300mm (thickness to be specified
by the manufacture) of commercial quality
conforming to IS : 15622 of approved make

Puducherry Region
11. Flooring
Page No.: 253
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

(Nitco / Kajaria ) in colours such as


white, ivory, grey, fume red, brown laid on
20mm thick cement mortar 1:4(1 cement : 4
Coarse sand) including pointing the joints
with white cement and matching pigment
etc., complete

11.38 Providing and laying ceramic glazed floor Sqm 949.05


tiles 300x300 mm (thickness to be specified
by the manufacturer) of first quality
conforming to IS: 15622 of approved make
(Bell / Johnson / Regency / Somany / Naveen
/ Asian ) in all colors, shades, except
white, ivory, grey, fume red brown laid on
20mm thick bed of cement mortar 1:4 (1
cement : 4 coarse sand) including pointing
the joints with white cement and matching
pigments etc., complete.

11.38.1 Providing and laying ceramic glazed floor sqm 1,134.42


tiles 300x300 mm (thickness to be specified
by the manufacturer) of first quality
conforming to IS: 15622 of approved make
(Nitco / Kajaria ) in all colors, shades,
except white, ivory, grey, fume red brown
laid on 20mm thick bed of cement mortar 1:4
(1 cement : 4 coarse sand) including
pointing the joints with white cement and
matching pigments etc., complete.

11.38.2 Providing and laying ceramic glazed floor sqm 837.83


tiles 300x300 mm (thickness to be specified
by the manufacturer) of commercial quality
conforming to IS: 15622 of approved make
(Bell / Johnson / Regency / Somany / Naveen
/ Asian ) in all colors, shades, except
white, ivory, grey, fume red brown laid on
20mm thick bed of cement mortar 1:4 (1
cement : 4 coarse sand) including pointing
the joints with white cement and matching
pigments etc., complete.

11.38.3 Providing and laying ceramic glazed floor sqm 1,013.31


tiles 300x300 mm (thickness to be specified
by the manufacturer) of commercial quality
conforming to IS: 15622 of approved make
(Nitco / Kajaria ) in all colors, shades,
except white, ivory, grey, fume red brown
laid on 20mm thick bed of cement mortar 1:4
(1 cement : 4 coarse sand) including
pointing the joints with white cement and
matching pigments etc., complete.

Puducherry Region
11. Flooring
Page No.: 254
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.39 Providing and laying rectified glazed Sqm 1,058.43


ceramic floor tiles 300x300mm or
more(thicknes to be specified by the
manufacturer) of first quality conforming
to IS: 15622 of approved make (Somany /
Nitco / Johnson )in colors white, ivory,
grey, fume red brown laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse
sand) including grouting the joints with
white cement and matching pigments etc.,
complete.

11.39.1 Providing and laying rectified glazed sqm 945.98


ceramic floor tiles 300x300mm or
more(thicknes to be specified by the
manufacturer) of commercial quality
conforming to IS: 15622 of approved make
(Somany / Nitco / Johnson )in colors white,
ivory, grey, fume red brown laid on 20mm
thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints
with white cement and matching pigments
etc., complete.

11.40 Providing and laying rectified glazed Sqm 1,120.22


ceramic floor tiles 300x300mm or
more(thicknes to be specified by the
manufacturer) of first quality conforming
to IS: 15622 of approved make (Somany /
Nitco / Jhonson ) in all colours shades
except white, ivory, grey, fume red brown
laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including pointing
the joints with white cement and matching
pigments etc., complete.

11.40.1 Providing and laying rectified ceramic sqm 1,120.22


rustic / matt finish floor tiles 300x300 mm
or more (thickness to be specified by the
manufacturer ) of 1st quality conforming to
IS:15622 of approved make ( Somany / Nitco)
in all colours shades laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse
sand) including pointing the joints with
white cement and matching pigments etc.,
complete

11.40.2 Providing and laying rectified ceramic sqm 1,274.70


rustic / matt finish floor tiles 600x600 mm
or more (thickness to be specified by the
manufacturer ) of 1st quality conforming to
IS:15622 of approved make ( Somany / Nitco)

Puducherry Region
11. Flooring
Page No.: 255
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

in all colours shades laid on 20mm thick


cement mortar 1:4 (1 cement : 4 coarse
sand) including pointing the joints with
white cement and matching pigments etc.,
complete

11.40.3 Providing and laying rectified glazed sqm 971.92


ceramic floor tiles 300x300mm or
more(thicknes to be specified by the
manufacturer) of commercial quality
conforming to IS: 15622 of approved make
(Somany / Nitco / Jhonson ) in all
colours shades except white, ivory, grey,
fume red brown laid on 20mm thick cement
mortar 1:4 (1 cement : 4 coarse sand)
including pointing the joints with white
cement and matching pigments etc.,
complete.

11.40.4 Providing and laying rectified ceramic sqm 971.92


rustic / matt finish floor tiles 300x300 mm
or more (thickness to be specified by the
manufacturer ) of commercial quality
conforming to IS:15622 of approved make (
Somany / Nitco) in all colours shades laid
on 20mm thick cement mortar 1:4 (1 cement :
4 coarse sand) including pointing the
joints with white cement and matching
pigments etc., complete

11.40.5 Providing and laying rectified ceramic sqm 1,132.57


rustic / matt finish floor tiles 600x600 mm
or more (thickness to be specified by the
manufacturer ) of commercial quality
conforming to IS:15622 of approved make (
Somany / Nitco) in all colours shades laid
on 20mm thick cement mortar 1:4 (1 cement :
4 coarse sand) including pointing the
joints with white cement and matching
pigments etc., complete

11.41.2A Providing and laying fully vitrified floor sqm 1,550.54


tiles of size 60x60cm (thicknes to be
specified by the manufacturer) with water
absorption's less than 0.08% and conforming
to IS: 15622 of approved make (Nitco / Rak
/ Johnson / Asian) in all colors and
shades, laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement and
matching pigments etc., complete. Size of
Tile 600x600mm.

Puducherry Region
11. Flooring
Page No.: 256
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.41.2B Providing and laying Soluble salt sqm 1,223.05


vitrified floor tiles of size 60x60cm
(thicknes to be specified by the
manufacturer) with water absorption's less
than 0.08% and conforming to IS: 15622 of
approved make (Nitco / Somany / Johnson /
Asian) in all colors and shades, laid on
20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints
with white cement and matching pigments
etc., complete. Size of Tile 600x600mm.

11.41.2C Providing and laying fully vitrified floor sqm 1,118.02


tiles of size 60x60cm (thicknes to be
specified by the manufacturer) with water
absorption's less than 0.08% and conforming
to IS: 15622 of approved make (Nitco / Rak
/ Johnson / Asian) in all colors and
shades, laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement and
matching pigments etc., complete. Size of
Tile 600x600mm.(Commercial quality)

11.41.2D Providing and laying Soluble salt sqm 1,019.16


vitrified floor tiles of size 60x60cm
(thicknes to be specified by the
manufacturer) with water absorption's less
than 0.08% and conforming to IS: 15622 of
approved make (Nitco / Somany / Johnson /
Asian) in all colors and shades, laid on
20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints
with white cement and matching pigments
etc., complete. Size of Tile
600x600mm.(Commercial quality)

11.41.4A Providing and laying fully vitrified floor sqm 2,283.63


tiles of size100X100cm (thicknes to be
specified by the manufacturer) with water
absorption's less than 0.08% and conforming
to IS: 15622 of approved make (Nitco / Rak
/ Johnson / Asian) in all colors and
shades, laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement and
matching pigments etc., complete. Size of
Tile 1000x1000mm.

11.41.4B Providing and laying fully vitrified floor sqm 1,591.60


tiles of size100X100cm (thicknes to be
specified by the manufacturer) with water

Puducherry Region
11. Flooring
Page No.: 257
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

absorption's less than 0.08% and conforming


to IS: 15622 of approved make (Nitco / Rak
/ Johnson / Asian) in all colors and
shades, laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement and
matching pigments etc., complete. Size of
Tile 1000x1000mm.(Commercial quality)

11.42 Dedect for not using 20mm thick cement Sqm 497.43
mortar 1:4 (1 cement : 4 coarse sand)
bedding laying of floor tiles.

11.43 Fixing glazed/Ceramic/vitrified floor tiles Sqm 446.50


with cement based high polymer modified
quick-set tile adhesive (water based)
conforming to IS:15477, using 5kg adhesive
per sqm of tile area, in average 3mm
thickness.

11.51 Providing and laying 22mm thick factory sqm 1,033.96


made pre polished cement concrete flooring
tiles of required colour and design over 20
mm thick cement mortar 1:4 ( 1 cement : 4
sand) and jointed with cement slurry mixed
with an admixture of pigment to match the
shade of the tile - (Endura \ Ultra \
Dazzle \ Technic)

11.52 Providing and fixing PVC corner beading of Metre 118.55


required size to suit the thickness of the
wall tile at the corner joints of dado
works

11.53.1 Providing and fixing homogeneous Polyvinyl sqm 577.39


chloride sheet in flooring and skirting in
approved pattern on a smooth and damp proof
base using rubber based adhesives of
approved quality including rolling with
light wooden roller weighing about 5kg. All
complete - 1.5mm thick - sheet

11.53.2 Providing and fixing homogeneous Polyvinyl sqm 641.47


chloride tile in flooring and skirting in
approved pattern on a smooth and damp proof
base using rubber based adhesives of
approved quality including rolling with
light wooden roller weighing about 5kg. All
complete - 1.5mm thick - tiles

11.53.3 Providing and fixing homogeneous Polyvinyl sqm 654.61


chloride sheet in flooring and skirting in

Puducherry Region
11. Flooring
Page No.: 258
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

approved pattern on a smooth and damp proof


base using rubber based adhesives of
approved quality including rolling with
light wooden roller weighing about 5kg. All
complete - 2mm thick - sheet

11.53.4 Providing and fixing homogeneous Polyvinyl sqm 670.59


chloride tille in flooring and skirting in
approved pattern on a smooth and damp proof
base using rubber based adhesives of
approved quality including rolling with
light wooden roller weighing about 5kg. All
complete - 2mm thick - tile

11.53.5 Rubber sheet flooring plain or marble of sqm 382.44


required colour on a smooth and damp proof
base using rubber adhesive of approved
quality including pressing the sheets /
tiles with a suitable tool to get a smooth
surface all complete - 3.2mm thick

Puducherry Region
12. Roofing
Page No.: 259
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12.1.1 Providing corrugated G.S sheet proofing Sqm 817.16


includung vertical/curved surface fixed
with polymer coated J or L hooks, bolts and
nuts 8mm diameter with bitumen and G.I.
sheets limpet washers or with G.I limpet
washers filled with white lead and
including a coat of approved steel primer
and two coats of approved paints on over
lapping of sheets complete upto any pitch
in horizontal/vertical or curved surfaces
excluding cost of purlins, rafters and
trusses and including cutting to size and
shape wherever required. 1.00mm thick with
zinc coating not less than 275gm/sqm.

12.1.2 Providing corrugated G.S sheet proofing Sqm 695.26


including vertical/curved surface fixed
with polymer coated J or L hooks, bolts and
nuts 8mm diameter with bitumen and G.I.
sheets limpet washers or with G.I limpet
washers filled with white lead and
including a coat of approved steel primer
and two coats of approved paints on over
lapping of sheets complete upto any pitch
in horizontal/vertical or curved surfaces
excluding cost of purlins, rafters and
trusses and including cutting to size and
shape wherever required. 0.80mm thick with
zinc coating not less than 275gm/sqm.

12.1.3 Providing corrugated G.S sheet proofing Sqm 591.48


includung vertical/curved surface fixed
with polymer coated J or L hooks, bolts and
nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I limpet washers
filled with white lead and including a coat
of approved steel primer and two coats of
approved paint on over lapping of sheets
complete upto any pitch in
horizontal/vertical or curved surfaces
excluding cost of purlins, rafters and
trusses and including cutting to size and
shape wherever required. 0.63mm thick with
zinc coating not less than 275gm/sqm.

12.2.1 Extra for straight cutting in C.G.S. sheet metre 41.89


roofing for making opening of area
exceeding 40sq decimeter for stacks, sky
light etc.: 1.00mm thick

12.2.2 Extra for straight cutting in C.G.S. sheet metre 33.51


roofing for making opening of area

Puducherry Region
12. Roofing
Page No.: 260
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

exceeding 40sq decimeter for chimney


stacks, sky light etc.: 0.80mm thick

12.2.3 Extra for straight cutting in C.G.S. sheet metre 33.51


roofing for making opening of area
exceeding 40sq decimeter for chimney
stacks, sky light etc.: 0.63mm thick

12.3.1 Extra for circular cutting in C.G.S. sheet metre 243.81


roofing for making opeining of area
exceeding 40sq. decimeter: 1.00mm thick.

12.3.2 Extra for circular cutting in C.G.S. sheet metre 194.74


roofing for making opeining of area
exceeding 40sq. decimeter: 0.80mm thick.

12.3.3 Extra for circular cutting in C.G.S. sheet metre 194.74


roofing for making opeining of area
exceeding 40sq. decimeter: 0.63mm thick.

12.4.1 Providing ridges or hips of width 60cm over metre 542.77


all width plain G.S. sheet fixed with
polymer coated J or L hooks, bolts and nuts
8mm dia. G.I. limpet and bitumen washers
complete. 0.80mm thick with zinc coating
not less than 275gm/m2

12.4.2 Providing ridges or hips of width 60cm over metre 478.70


all width plain G.S. sheet fixed with
polymer coated J or L hooks, bolts and nuts
8mm dia. G.I. limpet and bitumen washers
complete. 0.63mm thick with zinc coating
not less than 275gm/m2

12.5.1 Providing valleys of 90cm wide over all in metre 1,009.64


plain G.S. sheet fixed with polymer coated
J or L hooks, bolts and nuts 8mm dia. G.I.
limpet and bitumen washers complete. 1.60mm
thick with zinc coating not less than
350gm/m2.

12.6.1 Providing flashing of 40cm overall width in Sqm 415.40


plain, G.S. sheet fixed with polymer coated
J or L hooks, bolts and nuts, G.I. limpet
and bitumen washer complete, bent to shape
and fixed in wall with cement mortar 1:3 (1
cement : 3 coarse sand). 1.00mm thick with
zinc coating not less than 275gm/m2.

12.7.1 Providing and fixing 15cm wide 45cm overall metre 525.07
semi circular plain G.S. sheet gutter with
iron brackets 40X3mm size, bolts, nuts and

Puducherry Region
12. Roofing
Page No.: 261
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

washers etc., including making necessary


connection with rain water pipes complete.
0.80mm thick with zinc coating not less
than 275gm/m2.

12.7.2 Providing and fixing 15cm wide 45cm overall metre 471.72
semi circular plain G.S. sheet gutter with
iron brackets 40X3mm size, bolts, nuts and
washers etc., including making necessary
connection with rain water pipes complete.
0.63mm thick with zinc coating not less
than 275gm/m2.

12.8 Providing non-asbestos high impact Sqm 358.90


polypropylene reinforced cement 6mm thick
corrugated sheet (as per IS : 14871)
roofing upto any pitch and fixing with
pollymer coated J or L hooks, bolts and
nuts 8mm dia. G.I. plain and bitumen
washers or with self drilling fastener and
EPDM washers etc., complete excluding the
cost of purlins, rafters and trusses
corrugated sheets and including cutting to
size and shape wherever required.

12.9 Extra for straight cutting in non- asbestos metre 39.54


polypropylene reinforced cement corrugated,
semi-corrugated 6mm thick sheet roofing for
making openings of area exceeding 40 square
decimeter for chimney stacks, skylights
etc.

12.10 Extra for circular cutting in non-asbestos metre 109.24


polypropylene reinforced cement corrugated
/ semi-corrugated 6mm thick sheet roofing
for making openings of area exceeding 40
square decimeter.

12.11 Extra for providing and fixing wind ties of metre 123.66
40X6mm flat iron section.

12.12.1 Providing and fixing ridges and hips in metre 318.30


non-asbestos fibre cement high impact
polypropleyene reinforced roofing with
suitable fixing accessories or self
drilling fastener and EPDM washer etc.,
complete. Corrugated serrated adjustable
ridges.

12.12.2 Providing and fixing ridges and hips in metre 340.09


non-asbestos fibre cement high impact
polypropleyene reinforced roofing with

Puducherry Region
12. Roofing
Page No.: 262
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

suitable fixing accessories or self


drilling fastener and EPDM washer etc.,
complete. Plain wing adjustable ridges.

12.12.3 Providing and fixing ridges and hips in metre 419.65


non-asbestos fibre cement high impact
polypropleyene reinforced roofing with
suitable fixing accessories or self
drilling fastener and EPDM washer etc.,
complete. Close fitting adjustable ridges.

12.12.4 Providing and fixing ridges and hips in metre 354.61


non-asbestos fibre cement high impact
polypropleyene reinforced roofing with
suitable fixing accessories or self
drilling fastener and EPDM washer etc.,
complete. Unserrated adjustable hips.

12.13.1 Providing and fixing non-asbestos fibre metre 214.41


cement high impact polypropylene reinforced
roofing accessories in all colour with
polymer coated J or L hooks, bolts and nuts
and or G.I. seam bolts and nuts, G.I. plain
and bitumen washers or with self drilling
fastener and EPDM wahser etc., complete.
Corrugated apron pieces.

12.13.2 Providing and fixing non-asbestos fibre metre 150.24


cement high impact polypropylene reinforced
roofing accessories in all colour with
polymer coated J or L hooks, bolts and nuts
and or G.I. seam bolts and nuts, G.I. plain
and bitumen washers or with self drilling
fastener and EPDM wahser etc., complete.
Eave's filler pieces.

12.13.3 Providing and fixing non-asbestos fibre metre 317.49


cement high impact polypropylene reinforced
roofing accessories with polymer coated J
or L hooks, bolts and nuts and or G.I. seam
bolts and nuts, G.I. plain and bitumen
washers or with self drilling fastener and
EPDM wahser etc., complete. North light
curves.

12.13.4 Providing and fixing non-asbestos fibre metre 406.63


cement high impact polypropylene reinforced
roofing accessories with polymer coated J
or L hooks, bolts and nuts and or G.I. seam
bolts and nuts, G.I. plain and bitumen
washers or with self drilling fastener and
EPDM wahser etc., complete. Ventilator

Puducherry Region
12. Roofing
Page No.: 263
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

curves.

12.13.5 Providing and fixing non-asbestos fibre metre 351.14


cement high impact polypropylene reinforced
roofing accessories with polymer coated J
or L hooks, bolts and nuts and or G.I. seam
bolts and nuts, G.I. plain and bitumen
washers or with self drilling fastener and
EPDM wahser etc., complete. Barge boards.

12.13.6 Providing and fixing non-asbestos fibre Pair 136.69


cement high impact polypropylene reinforced
roofing accessories in all colour with
polymer coated J or L hooks, bolts and nuts
and or G.I. seam bolts and nuts, G.I. plain
and bitumen washers or with self drilling
fastener and EPDM wahser etc., complete.
Ridge finials

12.13.7 Providing and fixing non-asbestos fibre nos 417.58


cement high impact polypropylene reinforced
roofing accessories in all colour with
polymer coated J or L hooks, bolts and nuts
and or G.I. seam bolts and nuts, G.I. plain
and bitumen washers or with self drilling
fastener and EPDM wahser etc., complete.
Special North light curves.

12.13.8 Providing and fixing non-asbestos fibre metre 269.76


cement high impact polypropylene reinforced
roofing accessories in all colour with
polymer coated J or L hooks, bolts and nuts
and or G.I. seam bolts and nuts, G.I. plain
and bitumen washers or with self drilling
fastener and EPDM wahser etc., complete. S
type louvers.

12.14 Providing flat iron brackets 50X3mm size metre 65.14


with necessary bolts, nuts and washers
etc., for fixing asbestos cement / G.S.
sheets gutter with purllins

12.15.1 Painting top of roofs with bitumen of Sqm 141.52


approved quality at 17kg per 10sqm
impregnated with a coat of coarse sand at
60 cudm per 10 sqm including cleaning the
slab surface with brushes and finally with
a piece of cloth lightly soaked in kerosene
oil complete: With residual type petroleum
bitumen of penetration 80/100.

12.19.1 Providing and laying brick tiles of class Sqm 278.71

Puducherry Region
12. Roofing
Page No.: 264
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

designation 100 over mumty roofs grouted


with cement mortar 1:3 (1 cement : 3 fine
sand) mixed with 2% of integral water
proofing compound by weight of cement, over
a 12mm layer of cement mortar 1:3 (1 cement
: 3 fine sand) and finished neat: with
F.P.S. brick tiles.

12.20 Providing and laying pressed clay tiles (as Sqm 686.58
per approved pattern 18mm nominal thickness
and of approved size) on roofs jointed with
cement mortar 1:4 (1 cement : 4 coarse
sand) mixed with 2% intergral water
proofing compound laid over a bed of 20mm
thick cement mortar 1:4 (1 cement : 4
coarse sand) and finished neat complete.

12.20L Lime concrete terracing on roofs of cum 4,178.98


required thickness laid to fall with 25mm
nominal size brick aggregate and 50% lime
mortar 1:2 (1 lime putty : 2 surkhi) rammed
and finished with gur and belgiri treatment
complete including rounding of junctions
with parapet wall complete

12.21.1 Providing gola 75X75mm in cement concrete metre 153.39


1:2:4 (1 cement : 2 coarse sand : 4 stone
aggregate 10mm down gauge) including
finishing with cement mortar 1:3 (1 cement
: 3 fine sand) as per standard design: In
75X75mm deep chase.

12.22 Making khurras 45X45cm with average minimum No 265.16


thickness of 5cm cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate of 20mm nominal size) over P.V.C.
sheet 1mX1mx400micron, finished with 12mm
cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement rounding
the edge and making and finishing outlet
complete.

12.23.1.1 Providing sand stone slab for roofing and Sqm 536.89
laying them in cement mortar 1:4 (1 cement
: 4 coarse sand) over wooden karries or
R.C.C. battens (karries and battens to be
paid separately) including pointing the
ceiling joints with cement mortar 1:3 (1
cement : 3 fine sand) complete: Red sand
stone slab 40 to 50 mm thick

12.23.2.1 Providing sand stone slab for roofing and Sqm 576.67

Puducherry Region
12. Roofing
Page No.: 265
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

laying them in cement mortar 1:4 (1 cement


: 4 coarse sand) over wooden karries or
R.C.C. battens (karries and battens to be
paid separately) including pointing the
ceiling joints with cement mortar 1:3 (1
cement : 3 fine sand) complete: White sand
stone slab 40 to 50 mm thick.

12.24.1.1 Providing and fixing insulating board Sqm 485.37


ceiling of approved quality with necessary
nails etc., complete (frame work to be paid
separately) : Natural colour insulating
board 12mm thick.

12.24.2.1 Providing and fixing insulating board Sqm 564.94


ceiling of approved quality with necessary
nails etc., complete (frame work to be paid
separately) : White face insulating board
12mm thick.

12.24.3.1 Providing and fixing insulating board Sqm 525.16


ceiling of approved quality with necessary
nails etc., complete (frame work to be paid
separately) : Flame retardant face
insulating board 12mm thick.

12.25.1 Providing and fixing flat pressed 3 layer Sqm 644.51


medium density particle board or graded
particle board (Grade I) IS : 3087 marked
in ceiling with necessary nails etc.
complete (frame work to be paid separately)
: 12mm thick.

12.26.1 Providing and fixing plain multipurpose Sqm 505.26


cement board (high pressure steam cured) as
per IS : 14862 -2000 with suitable fibre
cement screw in ceiling etc. complete,
(frame work to be paid separately). 6mm
thick cement board.

12.27.1 Extra for circular cutting and waste in metre 309.05


ceiling with: 2nd class teak planks 20mm
thick.

12.27.2.1 Extra for circular cutting and waste in metre 219.21


ceiling with: Natural colour insulating
board 12mm thick.

12.27.3.1 Extra for circular cutting and waste in metre 229.11


ceiling with: White face insulating board
12mm thick.

Puducherry Region
12. Roofing
Page No.: 266
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12.27.4.1 Extra for circular cutting and waste in metre 224.16


ceiling with : Flame retardant face
insulating board : 12mm thick.

12.27.5.1 Extra for circular cutting and waste in metre 214.26


ceiling with : Standard quality hard board
sheet : 3mm thick.

12.27.5.2 Extra for circular cutting and waste in metre 219.01


ceiling with : Standard quality hard board
sheet : 4.5mm thick.

12.28 Extra for providing and fixing ceiling to Sqm 191.70


curved surfaces in narrow widths.

12.29 Providing and fixing false ceiling with Sqm 377.95


12mm thick plain / semi perforated or with
design ceilling tiles of BWP type phenol
formaldehyde syenthetic resin bonded
pressed particle board conforming to IS :
3087 finished with a coat of aluminium
primer on both sides and edges and two
coats of syenthetic enamel paint of
approved qualtiy on exposed face fixed to a
grid made out of anodised aluminium (with
15 micron anodic coating) T- sections
35X15X1.5mm size main runners and cross
runners 23.5X19X1.5mm fixed to main runners
placed 600mm centre to centre both ways so
as to form a grid of 600mm square. The
frame work shall be suspended from ceiling
by level adjusting hangers of 6mm dia M.S.
rod fixed to roof slab by means of ceiling
cleats. The suspenders shall be placed
600X1200mm centre to centre including
fixing to the frame with C.P. brace screws
and applying a priming coat of zinc
chromate yellow primer (aluminium frame
work shall be paid separately).

12.30 Extra for providing 3mm thick translucent Sqm 1,326.20


white acrylic plastic sheet of approved
quality in false ceiling instead of 12mm
thick plain / or with design particle board
ceiling tiles in item above.

12.31.1 Providing 10mm thick plaster of Paris Sqm 1,164.24


(gypsum anhydrous) ceiling upto a height of
5m above floor level over first class kail
wood strips 25X6mm with 10mm gap in between
and reinforced with rabbit wire mesh fixed
to wooden frame (frame work to be paid

Puducherry Region
12. Roofing
Page No.: 267
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

separately) : Flat surfaces.

12.31.2 Providing 10mm thick plaster of Paris Sqm 1,318.56


(gypsum anhydrous) ceiling upto a height of
5m above floor level over first class kail
wood strips 25X6mm with 10mm gap in between
and reinforced with rabbit wire mesh fixed
to wooden frame (frame work to be paid
separately) : Curved surfaces.

12.32 Extra for any sunk or raised mouldings in Sqm 486.02


the plaste of paris (gypsum anhydrous)
ceiling.

12.33 Extra for providing plaster of paris Sqm / metr 116.18


(Gypsum anhydrous) ceiling above 5m hieght e height
from floor level.

12.34 Providing and fixing thermal insulation of Sqm 472.16


ceiling(under deck insulation) with resin
bonded fibre glass wool conforming to IS:
8183 density 24kg/cum, 50mm thick, wrapped
in 200g virgin polythene bags fixed to
ceiling with metallic cleats (50x50x3mm) @
60cm and wire mesh of 12.5mmx24g wire and
mesh, for top most ceiling of building.

12.35 Providing and fixing thermal insulation Sqm 226.18


with resin bonded fibre glass wool
conforming to IS:8183 density 16kg/cum 50mm
thick, wraped in 200g virgin polythene bags
placed over existing false ceiling and held
in position by criss-crossing G.I. wire.

12.36.1 Thermal insulation of roofing with Expanded Sqm 184.93


polystyrene fixed with suitable adhesive to
the false ceiling : with Type N-Normal 50mm
thick

12.36.2 Thermal insulation of roofing with Expanded Sqm 244.60


polystyrene fixed with suitable adhesive to
the false ceiling : with Type SE - Self
Extinguishing type 50mm thick

12.37 Providing and fixing 100mm diameter and 60 Spouts 78.73


cm long rain water spout in cement mortar
1:4(1 cement : 4 fine sand). Stone ware
spout.

12.38.1 Providing and fixing M.S. holder bat clamps Nos 180.17
of approved design to C.I. or S.C.I. , rain
water pipes embeded in and including

Puducherry Region
12. Roofing
Page No.: 268
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement concrete blocks 10X10X10cm of 1:2:4


mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size) and cost
of cutting holes and making good the walls
etc. : 100mm diameter.

12.38.2 Providing and fixing M.S. holder bat clamps No 191.02


of approved design to C.I. or S.C.I. , rain
water pipes embeded in and including
cement concrete blocks 10X10X10cm of 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size) and cost
of cutting holes and making good the walls
etc. : 150mm diameter.

12.39.1 Providing lead caulked joints to sand cast joint 474.03


iron rain water pipes and fittings : 100mm
dia. pipe.

12.39.2 Providing lead caulked joints to sand cast Joint 677.33


iron rain water pipes and fittings : 150mm
dia. pipe.

12.40.1.1 Providing, fixing and embedding sand cast No 278.15


iron accessories for rain water pipes in
the masonry surrounded with 12mm thick
cement mortar of the same mix, as that of
masonry (lead caulking will be paid for
separately): sand cast iron plain shoes :
150mm diameter.

12.41.1 Providing and fixing on wall face metre 180.90


unplasticised rigid PVC rain water pipes
conforming to IS : 13592 type A including
jointing with seal ring conforming to IS :
5382 leaving 10mm gap for thermal
expansion, (i) single socketed pipes. 75mm
diameter.

12.41.2 Providing and fixing on wall face metre 301.04


unplasticised rigid PVC rain water pipes
conforming to IS : 13592 type A including
jointing with seal ring conforming to IS :
5382 leaving 10mm gap for thermal
expansion, (i) single socketed pipes. 110mm
diameter.

12.42.1.1 Providing and fixing on wall face No 127.99


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring

Puducherry Region
12. Roofing
Page No.: 269
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

conforming to IS : 5382 leaving 10mm gap


for thermal expansion. Coupler 75mm.

12.42.1.2 Providing and fixing on wall face No 159.95


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Coupler 110mm.

12.42.2.1 Providing and fixing on wall face No 127.99


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Single push fit
coupler : 75mm.

12.42.2.2 Providing and fixing on wall face No 181.65


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Single push fit
coupler : 110mm.

12.42.3.1 Providing and fixing on wall face No 202.94


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Single Tee with door
75X75X75mm.

12.42.3.2 Providing and fixing on wall face No 300.28


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Single Tee with door
110X110X110mm.

12.42.4.1 Providing and fixing on wall face No 182.45


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring

Puducherry Region
12. Roofing
Page No.: 270
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

conforming to IS : 5382 leaving 10mm gap


for thermal expansion. Single Tee with out
door 75X75X75mm.

12.42.4.2 Providing and fixing on wall face No 277.38


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Single Tee with out
door 110X110X110mm.

12.42.5.1 Providing and fixing on wall face No 127.39


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Bend 87.5deg. 75mm
bend.

12.42.5.2 Providing and fixing on wall face No 178.63


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Bend 87.5deg. 110mm
bend.

12.42.6.1 Providing and fixing on wall face No 206.97


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Shoe(plain)75mm
shoe.

12.42.6.2 Providing and fixing on wall face no 343.80


unplasticised- PVC moulded fittings /
accessories for unplasticised rigid PVC
rain water pipes conforming to IS : 13592
type A including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion. Shoe (plain)110mm
shoe.

12.43.1 Providing and fixing unplasticised - PVC no 192.52


pipe clips of approved design to
unplasticised - PVC rain water pipes by

Puducherry Region
12. Roofing
Page No.: 271
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

means of 50x50x50mm hard wood plugs,


screwed with M.S. screws of required length
including cutting brick work and fixing in
cement mortar 1:4(1 cement : 4 coarse sand)
and making good the wall etc. complete.
75mm

12.43.2 Providing and fixing unplasticised - PVC No 192.52


clips of approved design to unplasticised -
PVC rain water pipes by means of 50x50x50mm
hard wood plugs, screwed with M.S. screws
of required length including cutting brick
work and fixing in cement mortar 1:4(1
cement : 4 coarse sand) and making good the
wall etc. complete. 110mm

12.44 Providing and fixing to the inlet mouth of Each 32.88


rain water pipe cast iron grating 15cm
diameter and weighing not less than 440
grams

12.45.1 Providing and fixing at all height false Sqm 868.70


ceiling including providing and fixing of
frame work made of special sections power
pressed from M.S. sheet and galvanised in
accordance with zinc coating of grade 350
as per IS :277 and consisting of angle
cleats of size 25mm wide X 1.6mm thick with
flanges of 22mm and 37mm at 1200mm centre
to centre one flange fixed to ceiling with
dash fastener 12.5mm dia X 40mm long with
6mm dia bolts to the angle hangers of
25X25X0.55mm of required length, and other
end of angle hanger being fixed with nut
and bolts to the G.I. channels 45X15X0.9mm
running at the rate of 1200mm centre to
centre to which the ceiling section 0.5mm
thick bottom wedge of 80mm with tappered
flanges of 26mm each having clips of 10.5mm
at 450mm centre to centre shall be fixed in
a direction perpendicular to G.I. channel
with connecting clips made out of 2.64mm
dia X 230mm long G.I. wire at every
junction including fixing the gypsum board
with ceiling section and perimeter channels
0.5mm thick 27mm high having flanges of
20mm and 30mm long, the perimeter of
ceiling fixed to wall / partition with the
help of rawl plugs at 450mm centre to
centre with 25mm long drive-all screws @
230mm interval including jointing and
fixing to a flush finish of taper ed and

Puducherry Region
12. Roofing
Page No.: 272
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

square edges of the board with recommended


filler, jointing tapes, finisher and two
coats of primer suitable for board as per
manufactures specification and also
including the cost of making openings for
light fittings, grills, diffusers, cutouts
made with frame of perimeter channels
suitable fixed all complete as per drawing
and specification but excluding the cost of
painting with : 12.5mm thick tapered edge
gypsym board conforming to IS: 2095 - part
I,

12.46 Providing and fixing to the inlet mouth of Each 128.13


rain water pipe PTMT (an Engineering
thermoplastic) gratings square (slit) 150mm
square with a height of 8mm and weighing
not less than 100gms.

12.47.1 Providing and fixing UV stabilised fiber Sqm 985.54


glass reinforced plastic sheet roofing upto
any pitch including fixing with polymer
coated J or L hooks, bolts and nuts 8mm
dia. G.I. plain / bitumen washers complete
but excluding the cost of purlins, rafters,
trusses etc., The sheets shall be
manufactured out of 2400 TEX pannel rovigs
incorporating minimum 0.3% ultra-violet
stabiliser in resin system under
approximately 2400psi and hot cured. They
shall be of uniform pigmentation and
thickness without air pockets and shall
conforming to IS : 10192 and IS : 12866.
The sheets shall be opaque or translucent,
clear or pigmented, textured or smooth as
specified. 2mm thick corrugated (2.5" or
4.2" or 6") or step-down (2" or 3" or 6")
as specified.

12.47.2 Providing and fixing UV stabilised fiber Sqm 844.16


glass reinforced plastic sheet roofing upto
any pitch including fixing with polymer
coated J or L hooks, bolts and nuts 8mm
dia. G.I. plain / bitumen washers complete
but excluding the cost of purlins, rafters,
trusses etc., The sheets shall be
manufactured out of 2400 TEX pannel rovigs
incorporating minimum 0.3% ultra-violet
stabiliser in resin system under
approximately 2400psi and hot cured. They
shall be of uniform pigmentation and
thickness without air pockets and shall

Puducherry Region
12. Roofing
Page No.: 273
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

conforming to IS : 10192 and IS : 12866.


The sheets shall be opaque or translucent,
clear or pigmented, textured or smooth as
specified. 2mm thick flat.

12.48 Providing and fixing on roof pressed clay Sqm 333.59


tile (Mangalore tile) of 20mm nominal
thickness and of approved size and as per
approved pattern steel frame work complete
(steel frame work to be paid separately).

12.49 Providing and laying on roof pressed clay metre 129.96


tile ridge (mangalore tile) of 20mm
thickness and of approved pattern steel
frame work complete (steel frame work to be
paid separately).

12.50 Supply and installation of precoated Sqm 525.57


galvanised iron profile sheets (size, shape
and pitch of corrugation as approved)
0.50mm +/- 5% total coated thickness (TCT)
thick Zinc coating 120 gsm as per IS:277 in
240 mpa steel grade , 5-7 microns epoxy
primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet
should have protective guard film of 25
microns mimimum to avoid scratches while
transportation and should be supplied in
single length upto 12 metre or as desired.
The sheet shall be fixed using self
drilling / self tapping screws of size
(5.5x55mm) with EPDM seal or with polymer
coated J or L hooks , bolts and nuts 8mm
diameter with bitumen and G.I limpet
washers or with G.I. limpet washers filled
with white lead complete upto any pitch in
horizontal / vertical or curved surfaces
excluding the cost of purlins , rafters and
trusses and including cutting to size and
shape wherever required.

12.51.1 Providing and fixing precoated galvanised metre 551.66


steel sheet roofing accessories 0.50mm +
or- 5% total coated thickness (TCT), zinc
coating 120 gsm asper IS:277 in 240 mpa
steel grade, 5-7microns epoxy primer on
both side of the sheet and polyester top
coat 15-18 microns using self drilling /
self tapping screws or with polymer coated
J or L hooks, bolts and nuts and or G I
seam bolts and nuts, G I plain and bitumen
washers complete: Ridges plain (500 -

Puducherry Region
12. Roofing
Page No.: 274
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

600mm).

12.51.2 Providing and fixing precoated galvanised metre 525.59


steel sheet roofing accessories 0.50mm +
or- 5% total coated thickness (TCT), zinc
coating 120 gsm asper IS:277 in 240 mpa
steel grade, 5-7microns epoxy primer on
both side of the sheet and polyester top
coat 15-18 microns using self drilling /
self tapping screws or with polymer coated
J or L hooks, bolts and nuts and or G I
seam bolts and nuts, G I plain and bitumen
washers complete: Flashing / Aprons (up to
600mm).

12.51.3 Providing and fixing precoated galvanised metre 616.77


steel sheet roofing accessories 0.50mm +
or- 5% total coated thickness (TCT), zinc
coating 120 gsm asper IS:277 in 240 mpa
steel grade, 5-7microns epoxy primer on
both side of the sheet and polyester top
coat 15-18 microns using self drilling /
self tapping screws or with polymer coated
J or L hooks, bolts and nuts and or G I
seam bolts and nuts, G I plain and bitumen
washers complete: North light curves.

12.51.4 Providing and fixing precoated galvanised metre 488.76


steel sheet roofing accessories 0.50mm +
or- 5% total coated thickness (TCT), zinc
coating 120 gsm asper IS:277 in 240 mpa
steel grade, 5-7microns epoxy primer on
both side of the sheet and polyester top
coat 15-18 microns using self drilling /
self tapping screws or with polymer coated
J or L hooks, bolts and nuts and or G I
seam bolts and nuts, G I plain and bitumen
washers complete: Barge board (upto 300mm).

12.51.5 Providing and fixing precoated galvanised metre 626.09


steel sheet roofing accessories 0.50mm +
or- 5% total coated thickness (TCT), zinc
coating 120 gsm asper IS:277 in 240 mpa
steel grade, 5-7microns epoxy primer on
both side of the sheet and polyester top
coat 15-18 microns using self drilling /
self tapping screws or with polymer coated
J or L hooks, bolts and nuts and or G I
seam bolts and nuts, G I plain and bitumen
washers complete: Crimp curve.

12.51.6 Providing and fixing precoated galvanised metre 760.82

Puducherry Region
12. Roofing
Page No.: 275
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

steel sheet roofing accessories 0.50mm +


or- 5% total coated thickness (TCT), zinc
coating 120 gsm asper IS:277 in 240 mpa
steel grade, 5-7microns epoxy primer on
both side of the sheet and polyester top
coat 15-18 microns using self drilling /
self tapping screws or with polymer coated
J or L hooks, bolts and nuts and or G I
seam bolts and nuts, G I plain and bitumen
washers complete: Gutter (600mm over all
girth).

12.52 Providing and fixing tiled false ceiling of Sqm 319.47


approved materials of size 595X595mm in
true horizontal level suspended on
interlocking metal grid of hot dipped
galvanised steel sections (galvanised @
170gsm / sqm.) consisting of main T runner
with suitable spaced joints to get required
length and of size 24X38mm made from 0.30mm
thick (minimum) sheet spaced at 1200mm
centre to centre and cross T of size
24X25mm made of 0.30mm thick (minimum)
sheet, 1200mm long spaced between main T at
600mm center to center to form a grid of
1200X600mm and secondary cross T of length
600mm and size 24X25mm made of 0.30mm thick
(minimum) sheet to be interlocked at middle
of the 1200X600mm pannel to form grids of
600X600mm and wall angle of size
21X21X0.30mm and laying false ceiling tiles
of approved texture in the grid including,
wherever required cutting / making opening
for services like diffusers, grills, light
fittings, fixtures, smoke detector etc.,
Main T runners to be suspended from ceiling
using G.I. slotted cleats fixed to ceiling
with 6mm dia and 50mm long dash fasteners,
4mm G.I. adjustable rods with galvanised
level clips spaced at 1200mm center to
center along main T , bottom exposed width
of 24mm of all T sections shall be
prepainted with polyester paint, all
complete at all heights as per
specifications drawings. (the rate is
excluding the cost of tiles which will be
paid for separately).
X

12.61 Providing and fixing 1/2" tk Daikin mineral sqm 1,130.54


false ceiling tiles prima fine fissued
regular edge or equivalent having fire

Puducherry Region
12. Roofing
Page No.: 276
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

propogation test of 'class O' as per


B.S.476 part 6, with a flame spread of
class A of US federal spec.SS/S/118B.
Thermal conductivity at 0.045K cal/mhc of
JIS A 1412. Noice reduction co efficient
(NRC) of 0.55-0.6 of ASTM C 423,light
reflectance of LR 1 (>75% os ASTM C523) CAC
at 36 of ASTM E 413 and asbestos free and
humidity resistance of RH 99% of size
600x600mm with interlocking metal grid of
hot dipped galvanized steel sections
(galvanized at 170gm / sqm) with
pre-finished in baked polyster paint ,
consisting of main runners of size 24x33 mm
T-section made of 0.27mm tk (minimum) sheet
spaced at 1200mm centre to centre and
secondary T hot dipped galvanized steel
section of size 28x24mm made of 0.27 mm tk
(Minimum) sheet with pre finished in baked
polyester paint to be interlocked in
between main runner at 600mm centre to
center to form overall grid of 600x600mm
laying 15mm tk mineral fibre false ceiling
tiles in the grid suspended by hanger rods
60cm long with bolts @ 1.2m c/c including
cutting / making openings of services like
fittings, diffusers , grills, smoke
detectors, etc including providing
necessary wall angle of size 19x19x0.45 mm
on all four sides including scaffolding
etc., complete as directed by the engineer
in charge, ceiling upto 6.5m heights

12.62 Providing and fixing false ceiling works sqm 732.25


using superior fire rated gypsum board of
12.5mm tk mounted on GI frame work with
ceiling section of size 80x26x0.55x3660 mm
spacing at 600mm c/c suspended from ceiling
using hanger rods at 1200mm c/c with screw
to level and line and applying one coat of
primer , two coats of putty followed by and
reflective paint in front of the stage area
to the required shape and size , including
scaffolding etc.complete as directed by the
engineer -in-charge upto 6.5m height

12.63 False ceiling using suspended powder coated sqm 933.13


GI section of size -24x33mm T-section made
of 0.27 mm tk (minimum) sheet spaced at
600x1200mm centre to centre and secondary T
hot dipped galvanized steel section 28x24mm
made of 0.27mm tk (minimum) sheet with pre

Puducherry Region
12. Roofing
Page No.: 277
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

finished in baked polyester paint to be


interlocked in between main runner at 600mm
centre to centre to form overall grid of
600x600mm grid structure suspended from
ceiling by hanger rods at 1200 mm c/c with
600x600mm eboard (prepainted cement mineral
boards) tiles of 6mm tk , complete as
directed by the engineer-in- charge at
heights upto 3mts

12.64A Providing,supplying and fixing panels of sqm 3,384.01


aluminium composite panel cladding in
required design and design in mettalic
colour of approved shade made out of 3mm
thick aluminium composite panel material
consisting of 2mm thick FR grade mineral
core sandwitched between two aluminium
sheet (each 0.5 thick). The aluminium
composite panel cladding sheet shall be
coil coated with Kynan 500 based PVDF /
Lumiflon based fluoropolymer resin coating
of approved colour and shade on face No:1
and polymer (service) coating on face No:2
as specified and the panels shall be fixed
on the structural frame of anodized
aluminium extruded sections of size 38mm
x28mm (weighing approximately @0.490kg/m)
placed suitably at not less than 60 cm
centre to centre and fitted with the wall
using G.I angles of size 38mm x38mm x100mm
, through aluminium cleat angles and
fastened using stainless steel screws ,
bolts and nuts etc and the 6mm thick joint
gaps / grooves shall be filled with
aluminium / transluent / grey / black /
clear or white weather Silican Sealent. The
rate is inclusive of all materials , labour
charges, erection, scaffolding charges and
other standard accessories etc. - For
external walls surfaces for all floors.

12.65 Providing and laying water proofing for sqm 768.00


roof portion - Clean the surface using wire
brush to remove fungus sticking on the tile
surface. Remove the laitance and plaster
residues with a chisel & hammer and repair
any broken structure with civil work.Apply
one coat MACRYL SL (Acrylic penetrating
primer) Lay one coat of 3-4 mm thick
MATPROOF ACR (Fibre reinforced Acrylic
plaster) Elastomeric plaster on the flat
area. Provide a seal coat with a flexible

Puducherry Region
12. Roofing
Page No.: 278
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

MACRYL again

12.66 Providing and laying water proofing for sqm 587.14


Parapet wall - Clean the surface using wire
brush to remove fungus sticking on the tile
surface. Remove the laitance and plaster
residues with a chisel & hammer and repair
any broken structure with civil work.Apply
one coat MACRYL SL (Acrylic penetrating
primer) Lay one coat of 3-4 mm thick
MATPROOF ACR (Fibre reinforced Acrylic
plaster) Elastomeric plaster on the flat
area. Provide a seal coat with a flexible
MACRYL again

12.67 Chipping and rackout the damaged pressed Rmt 92.84


clay tile joints on roofs and fill the
joints with cement mortar 1.4 (1 cement : 4
fne sand) admixed with cera latex SBR @ 2kg
per bag of cement and neat finishing
complete.The rate includes cost of cement ,
admixture , labour etc.

12.68 Over the RCC terrace , pressed clay tiles , sqm 726.99
asbestoscement sheet, mangalore tiles roof
,G.I. sheet water proofing by applying a
coat of bituminous primer by brush and
providing & laying one layer of CERA WP
SHIELD P 3180 , 3 mm thick membrane
reinforced with 180 GSM non woven polyester
matt , laid by torching the wp shield by
welding method using gas burner roll
forward and press firmly against the
substrate to bond ,seal the joints and
edges heat both the overlaps and pressed.
The rate includes necessary cleaning the
surface with wire or coir brush , cost of
materials tools tackles , labour etc all
complete

12.69 Applying a coat of bituminous based solar sqm 81.98


reflective aluminum paint @ 0.2kg / sqm
including necessary surface preparation
,cleaning , material , tools , tackles ,
labours etc. all copmplete.

12.70 Providing and fixing colour coated sqm 506.37


galvalume sheet of 550 M.P.A yield of AZ
150 strength formed as per patterned steel
rib profile with the depth of 31mm pitch of
250mm and overall width of 1060mm and
thickness 0.5mm with required J or C hook

Puducherry Region
12. Roofing
Page No.: 279
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

bolts and nets 8mm dia G.S paint and


working etc., complete excluding the cost
of purlin , rafter and truss etc.,

Puducherry Region
13. Finishing
Page No.: 280
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.1.1 12mm cement plaster of mix :Cement mortar sqm 181.19


1:4 (1 cement : 4 fine sand)

13.1.2 12mm cement plaster of mix :Cement mortar sqm 165.84


1:6 (1 cement : 6 fine sand)

13.2.1 15 mm cement plaster on rough side of sqm 211.63


single or half brick wall of mix - cement
mortar 1:4 (1 cement : 4 fine sand)

13.2.2 15mm cement plaster on the rough side of sqm 193.30


single or half brick wall of mix: cement
mortar 1:6 (1 cement : 6 fine sand)

13.3.1 20mm cement plaster of mix 1:4 (1cement : 4 sqm 257.54


fine sand)

13.3.2 20mm cement plaster of mix cement mortar sqm 233.66


1:6 (1 cement : 6 fine sand)

13.4.1 12mm cement plaster of mix cement mortar sqm 176.45


1:4 (1 cement : 4 coarse sand)

13.4.2 12mm cement plaster of mix cement mortar sqm 161.10


1:6 (1cement : 6 coarse sand)

13.5.1 15mm cement plaster on rough side of single sqm 205.98


or half brick wall of mix - 1:4 (1 cement :
4 coarse sand)

13.5.2 15 mm cement plaster on rough side of sqm 187.64


single or half brick wall of mix 1:6 (1
cement : 6 coarse sand)

13.6.1 20 mm cement plaster of mix 1 :4 (1 cement sqm 250.17


: 4 coarse sand)

13.6.2 20 mm cement plaster of mix 1:6 (1 cement : sqm 226.29


6 coarse sand)

13.7.1 12 mm cement plaster finished with a sqm 241.16


floating coat of neat cement of mix 1:3 (1
cement : 3 fine sand)

13.7.2 12 mm cement plaster finished with a sqm 225.81


floating coat of neat cement of mix 1:4 (1
cement : 4 fine sand)

13.8.1 15 mm cement plaster on rough side of sqm 274.59


single or half brick wall finished with a
floating coat of neat cement of mix 1:3 (1
cement : 3 fine sand).

Puducherry Region
13. Finishing
Page No.: 281
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.8.2 15 mm cement plaster on rough side of sqm 256.26


single or half brick wall finished with a
floating coat of neat cement of mix 1:4 (1
cement : 4 fine sand)

13.8.3 12 mm cement plaster of mix - 1:5 (1 cement sqm 172.00


: 5 fine sand)

13.9.1 Cement plaster 1:3 (1 cement : 3 coarse sqm 236.42


sand) finished with a floating coat of neat
cement 12 mm cement plaster.

13.9.2 Cement plaster 1:3 (1 cement : 3 coarse sqm 319.03


sand) finished with a floating coat of neat
cement 20 mm cement plaster.

13.9.2A 15mm cement plaster on the rough side of sqm 200.13


single or half brick wall of mix 1:5 (1
cement : 5 fine sand)

13.10 15 mm cement plaster 1:3 (1 cement : 3 sqm 268.93


coarse sand) finished with a floating of
neat cement on the roughside of single or
half brick wall.

13.11 18 mm cement plaster in two coats under sqm 257.33


layer 12 mm thick cement plaster 1:5 (1
cement : 5 coarse sand) finished with a top
layer 6mm thick cement plaster 1:6 (1
cement : 6 fine sand).

13.12 18 mm cement plaster in two coats under sqm 270.31


layer 12 mm thick cement plaster 1:5 (1
cement : 5 coarse sand) and a top layer 6mm
thick cement plaster 1:3 (1 cement : 3
coarse sand) finished rough with sponge.

13.13 12 mm cement plaster 1:2 (1 cement : 2 sqm 196.71


stone dust).

13.14 15 mm cement plaster 1:2 (1 cement : 2 sqm 230.17


stone dust) on the rough side of single or
half brick wall.

13.15 20 mm cement plaster 1:2 (1 cement : 2 sqm 281.68


stone dust).

13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 sqm 142.19


fine sand).

13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sqm 193.76


sand) finished with a floating coat of neat

Puducherry Region
13. Finishing
Page No.: 282
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement and thick coat of lime wash on top


of walls when dry for bearing of R.C.C
slabs and beams.

13.18 Neat cement punning. sqm 46.27

13.19.1 Rough cast plaster upto 10m height above sqm 453.37
ground level with a mixture of sand and
gravel or crushed stone from 6mm to 10mm
nominal size dashed over and including the
fresh plaster in two layers under layer
12mm cement plaster 1:4 (1 cement : 4
coarse sand) and top layer 10mm cement
plaster 1:3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by
volume of cement - Ordinary cement finish
using ordinary cement.

13.20 Pebble dash plaster upto 10m height above sqm 428.08
ground level with a mixture of washed
pebble or crushed stone 6mm to 12.5mm
nominal size dashed over and including the
fresh plaster in two layers, under layer
12mm cement plaster 1:4 (1 cement : 4
coarse sand) and top layer 10mm cement
plaster 1:3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by
volume of cement.

13.21 Extra for providing and mixing water bag of cem 49.97
proofing material in cement plaster work in ent
proportion recommended by the
manufacturers.

13.22 Extra for plastering exterior walls of sqm 39.51


height more than 10m from ground level for
every additional height of 3 m or part
thereof.

13.23.1 Extra for plastering on circular work not sqm 21.64


exceeding 6 m in radius in one coat.

13.23.2 Extra for plastering on circular work not sqm 33.03


exceeding 6 m in radius in two coat.

13.24.1 Extra for plastering done on moulding sqm 310.86


cornices or architraves including neat
finish to line and level: in one coat

13.24.2 Extra for plastering done on moulding sqm 512.50


cornices or architraves including neat
finish to line and level: in two coat

Puducherry Region
13. Finishing
Page No.: 283
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.25.1 Extra for plastering - Spherical ceiling. sqm 80.80

13.25.2 Extra for plastering - Groined ceiling. sqm 87.72

13.25.3 Extra for plastering - Flewing ceiling. sqm 53.16

13.26 Providing and applying plaster of paris sqm 168.63


putty of 2mm thickness over plastered
surface to prepare the surface even and
smooth complete.

13.26A Providing and applying ready mixed wall sqm 179.84


putty (JK / BIRLA ) of 2mm thickness over
plastered surface to prepare the surface
even and smooth complete

13.27 Extra for lining out plaster to imitate sqm 50.72


stone or concrete blocks walling

13.28.1 12mm thick plain cement mortar bands in unit 3.62


cement mortar 1:4 (1 cement : 4 fine sand)
- Flush Band. (Cost for 1 metre long and 1
cm wide band)

13.28.2 12mm thick plain cement mortar bands in unit 3.93


cement mortar 1:4 (1 cement : 4 fine sand)
- Sunk Band. (Cost for 1 metre long and 1
cm wide band)

13.28.3 12mm thick plain cement mortar bands in unit 4.43


cement mortar 1:4 (1 cement : 4 fine sand)
- Raised Band. (Cost for 1 metre long and 1
cm wide band)

13.28.4 12mm thick plain cement mortar bands in unit 7.35


cement mortar 1:4 (1 cement : 4 fine sand)
- Moulded Band. (Cost for 1 metre long and
1 cm wide band)

13.29.1 18mm thick plain cement mortar bands in unit 4.48


cement mortar 1:4 (1 cement : 4 fine sand)
- Flush Band. (Cost for 1 metre long and 1
cm wide band)

13.29.2 18mm thick plain cement mortar bands in unit 4.89


cement mortar 1:4 (1 cement : 4 fine sand)
- Sunk Band. (Cost for 1 metre long and 1
cm wide band)

13.29.3 18mm thick plain cement mortar bands in unit 5.52


cement mortar 1:4 (1 cement : 4 fine sand)

Puducherry Region
13. Finishing
Page No.: 284
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

- Raised Band. (Cost for 1 metre long and 1


cm wide band)

13.29.4 18mm thick plain cement mortar bands in unit 9.99


cement mortar 1:4 (1 cement : 4 fine sand)
- Moulded Band. (Cost for 1 metre long and
1 cm wide band)

13.30 18mm thick moulded cement mortar band in unit 9.86


two coats under layer 12mm thick with
cement mortar 1:5 (1 cement : 5 course
sand) top layer 6mm thick with cement
mortar 1:4 (1 cement : 4 fine sand). (Cost
for 1 metre long and 1 cm wide band)

13.31.1 Pointing on brick work or brick flooring sqm 108.27


with cement mortar 1:3 (1 cement : 3 fine
sand) - Flush / Ruled / Struck or weathered
pointing

13.31.2 Pointing on brick work or brick flooring sqm 182.54


with cement mortar 1:3 (1 cement : 3 fine
sand) - Raised and cut pointing

13.32.1 Pointing on tile brick work with cement sqm 148.71


mortar 1:3 (1 cement : 3 fine sand) - Flush
/ Ruled / Struck or weathered pointing

13.33.1 Pointing on stone work with cement mortar sqm 158.01


1:3 (1 cement : 3 fine sand) - Flush /
Ruled pointing.

13.33.2 Pointing on stone work with cement mortar sqm 294.74


1:3 (1 cement : 3 fine sand) - Raised and
cut pointing.

13.34 Raised and cut pointing on stone work in sqm 322.30


white cement mortar 1:3 (1 white cement : 3
marble dust).

13.35.1 Pointing on stone slab ceiling with cement sqm 89.02


mortar 1:2 (1 cement : 2 fine dust) - Flush
/ Ruled pointed.

13.36 Extra for pointing on walls on the outside sqm 5.65


at height more than 10m from ground level
for every additional height of 3m or part
thereof.

13.37.1 White washing with lime to give on even sqm 15.10


shade - New work (three or more coats).

Puducherry Region
13. Finishing
Page No.: 285
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.38 Satna lime wash on walls one coat. sqm 5.84

13.38.2 Painting GI pipes and fittings with metre 12.57


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work
20mm diameter pipe

13.38.3 Painting GI pipes and fittings with metre 16.48


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work
25mm diameter pipe

13.39.1 Colour washing such as green, blue or buff sqm 18.94


to give an even shade - New work (two or
more coats) with a base coat of white
washing with lime.

13.39.2 Colour washing such as green, blue or buff sqm 19.16


to give an even shade - New work (two or
more coats) with a base coat of whiting.

13.40 Distempering with dry distemper of approved sqm 72.76


brand and manufacture (two or more coats)
and of required shade on new work, over and
including priming coat of whiting to give
an even shade.

13.41.1 Distempering with oil bound washable sqm 102.51


distemper of approved brand and manufacture
to give an even shade - New work (two or
more coats) over and including priming coat
with cement primer.

13.42.1 Distempering with 1st quality acrylic sqm 56.25


washable distemper (ready made) of approved
manufacturer and of required shade and
colour complete, as per manufacturer
specification - Two or more coats on new
work.

13.43.1 Applying one coat of cement primer of sqm 42.27


approved brand and manufacture on wall
surface - Cement primer

13.44.1 Finishing walls with water proofing cement sqm 63.01


paint of required shade - New work. (Two or
more coats applied @ 3.84 kg/10 sqm)

13.45.1 Finishing walls with textured exterior sqm 146.56


paint of required shade - New work (Two or

Puducherry Region
13. Finishing
Page No.: 286
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

more coats applied @ 3.28 ltr/10 sqm) over


and including base coat of water proofing
cement paint applied @ 2.20 kg/10 sqm.

13.46.1 Finishing walls with Acrylic Smooth sqm 92.57


exterior paint of required shade - New work
(Two or more coat applied @ 1.67 ltr / 10
sqm over and including base coat of water
proofing cement paint applied @ 2.20 kg /
10 sqm)

13.47.1 Finishing walls with Premium Acrylic Smooth sqm 107.08


exterior paint with Silicone additives of
required shade - New work (Two or more
coats applied @ 1.43 ltr / 10 sqm over and
including base coat of water proofing
cement paint applied @ 2.20 kg/10 sqm).

13.48.1 Finishing walls with Deluxe Multi surface sqm 103.13


paint system for interiors and exteriors
using primer as permanufacturers
specifications - Two or more coats applied
@ 1.25 ltr / 10 sqm over and including one
coat of special primer applied @ 0.75 ltr /
10 sqm.

13.48.2 Finishing walls with Deluxe Multi surface sqm 91.06


paint system for interiors and exteriors
using primer as permanufacturers
specifications - Painting wood work with
Deluxe Multi Surface Paint of required
shade. Two or more coats applied @ 0.90
ltr / 10 sqm over an under coat of primer
applied @ 0.75 ltr/10 sqm of approved brand
or manufacture.

13.48.3 Finishing walls with Deluxe Multi surface sqm 91.85


paint system for interiors and exteriors
using Primer as per manufacturers
specifications - Painting wood work with
Deluxe Multi Surface Paint of required
shade. Two or more coat applied @ 0.90
ltr/10 sqm over an under coat of primer
applied @ 0.80 ltr/ 10 sqm of approved
brand or manufacture

13.49 Extra for applying water proofing cement sqm 25.02


paint as primer applied @ 2.2 kg/10 sqm
instead of primer for exterior finishing in
Item No.13.48.1.

13.50.1 Applying priming coat - with ready mixed sqm 38.44

Puducherry Region
13. Finishing
Page No.: 287
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pink or grey primer of approved brand and


manufacture on wood work (hard and soft
wood).

13.50.2 Applying priming coat - with ready mixed sqm 49.19


aluminium primer of approved brand and
manufacture on resinous wood and plywood.

13.50.3 Applying priming coat: with ready mixed red sqm 35.37
oxide zinc chromate primer of approved
brand and manufacture on steel galvanised
iron/steel works.

13.50.4 Applying priming coat - with ready mixed sqm 19.96


red oxide zinc chromate primer of approved
brand and manufacture on steel work (second
coat).

13.51 Painting one thin coat with white lead of sqm 50.88
approved brand and manufacture on wet or
patchy portion of plastered surfaces.

13.52.1 Finishing with epoxy paint (two or more sqm 147.11


coats) at all locations prepared and
applied as per manufacturer specifications
including appropriate priming coat,
preparation of surface, etc. complete - On
Steel work.

13.52.2 Finishing with epoxy paint (two or more sqm 144.03


coats) at all locations prepared and
applied as per manufacturer specifications
including appropriate priming coat,
preparation of surface, etc. complete - On
concrete work.

13.53.1 Painting on G.S. sheet with synthetic sqm 89.60


enamel paint of approved brand and
manufacture of required colour to give an
even shade - New work (two or more coats)
including a coat of approved steel primer
but excluding a coat of mordant solution.

13.54.1 Applying a coat of mordant solution on G.S. sqm 31.85


sheet - with a solution of 38 gms of copper
acetate in a litre of soft water.

13.54.2 Applying a coat of mordant solution on G.S. sqm 28.21


sheet - with a solution made of 13 gms of
hydrochloric acid in a solution of 13 gms
each of copper chloride, copper nitrate and
ammonium chloride dissolved in a litre of

Puducherry Region
13. Finishing
Page No.: 288
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

soft water.

13.55.1 Painting (two or more coats) on rain water, metre 39.79


soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint
approved brand and manufacture over and
including a priming coat of readymixed zinc
chromate yellow primer on new work - 100mm
diameter pipes.

13.55.2 Painting (two or more coats) on rain water, metre 59.31


soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint
approved brand and manufacture over and
including a priming coat of readymixed zinc
chromate yellow primer on new work - 150mm
diameter pipes

13.56.1 Painting (two or more coats) on rain water, metre 42.47


soil, waste and vent pipes and fittings
with synthetic enamel paint of approved
brand and manufacture and required colour
over a priming coat of approved steel
primer on new work - 100mm diameter pipes

13.56.2 Painting (two or more coats) on rain water, metre 63.32


soil, waste and vent pipes and fittings
with synthetic enamel paint of approved
brand and manufacture and required colour
over a priming coat of approved steel
primer on new work - 150mm diameter pipes

13.57.1 Painting with oil type wood preservative of sqm 29.73


approved brand and manufacture - New work
(Two or more coats)

13.58 Providing and applying two coats of fire sqm 293.78


retardant paint unthinned on cleaned wood /
ply surface @ 3.5 sqm per litre per coat
including preparation of base surface as
per recommendations of manufacturer to make
the surface fire retardant.

13.59 Coal tarring two coats on new work using sqm 35.94
0.16 and 0.12 litre coal tar per sqm in the
first coat and second coat respectively.

13.60.1A Wall painting with plastic emulsion paint - sqm 107.26


Royal of approved brand and manufacture to
give an even shade - two or more coats on
new work

Puducherry Region
13. Finishing
Page No.: 289
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.60.1B Wall painting with plastic emulsion paint - sqm 91.95


Premium of approved brand and manufacture
to give an even shade - two or more coats
on new work

13.60.1C Wall painting with plastic emulsion paint - sqm 84.65


Commercial of approved brand and
manufacture to give an even shade - two or
more coats on new work

13.61.1 Painting with synthetic enamel paint of sqm 79.65


approved brand and manufacture to give an
even shade - Two or more coats on new work.

13.62.1 Painting with synthetic enamel paint of sqm 117.32


approved brand and manufacture of required
colour to give an even shade - Two or more
coats on new work over an under coat of
suitable shade with ordinary paint of
approved brand and manufacture.

13.63.1 Painting with aluminium enamel paint of sqm 77.32


approved brand and manufacture to give an
even shade - Two or more coats on new work.

13.64.1 Painting with acid proof paint of approved sqm 95.04


brand and manufacture to give an even shade
- Two or more coats on new work.

13.65.1 Painting with black anti-corrosive sqm 69.98


bitumastic paint of approved brand and
manufacture to give an even shade - Two or
more coats on new work.

13.66.1 Floor painting with floor enamel paint of sqm 86.98


approved brand and manufacture to give an
even shade - Two or more coats on new work.

13.67.1 Varnishing with varnish of approved brand sqm 134.44


and manufacture - Two or more coats of glue
sizing with copal varnish over an under
coat of flatting varnish.

13.67.2 Varnishing with varnish of approved brand sqm 142.20


and manufacture - Two or more coats of glue
sizing with spar varnish or an under coat
of flatting varnish.

13.68.1 French spirit polishing - Two or more coats sqm 211.74


on new works including a coat of wood
filler.

Puducherry Region
13. Finishing
Page No.: 290
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.69.1 Polishing on wood work with ready made wax sqm 95.82
polish of approved brand and manufacture -
New work.

13.70 Floor polishing on masonry or concrete sqm 43.21


floors with wax polish of approved brand
and manufacture.

13.71 Lettering with black Japan paint of unit 2.73


approved brand and manufacture. (Cost for 1
letter of 1 cm height)

13.72 Washed stone grit plaster on exterior walls sqm 601.89


of height upto 10m above ground level in
two layers, under layer 12mm cement plaster
1:4 (1 cement : 4 coarse sand) furrowing
the under layer with scratching tool,
applying cement slurry on the under layer @
2 kg. of cement per square metre, top layer
15mm cement plaster 1:1/2:2 (1 cement : 1/2
coarse sand : 2 stone chipping 10mm nominal
size) in panels with groove all around as
per approved pattern including scrubbing
and washing, the top layer with brushes and
water to expose the stone chippings
complete as per specification (Payment for
providing grooves shall be made
separately).

13.73.1 Forming groove of uniform size in the top metre 35.55


layer of washed stone grit plaster as per
approved pattern using wooden battens,
nailed to the under layer including removal
of wooden battens, repair to the edges of
panels and finishing the groove complete as
per specifications - 15mm wide and 15mm
deep groove.

13.73.2 Forming groove of uniform size in the top metre 35.96


layer of washed stone grit plaster as per
approved pattern using wooden battens,
nailed to the under layer including removal
of wooden battens, repair to the edges of
panels and finishing the groove complete as
per specifications - 20 mm wide and 15 mm
deep groove.

13.74 Extra for washed grit plaster on exterior sqm 87.99


walls of height more than 10m from ground
level for every additional height of 3m
part thereof.

Puducherry Region
13. Finishing
Page No.: 291
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.75 Extra for washed stone grit plaster on sqm 63.80


circular work not exceeding 6m in radius
(in two coats).

13.76 Forming groove of uniform size from 12x12 metre 35.58


mm and upto 25x15 mm in plastered surface
as per approved pattern using wooden
battens, nailed to the under layer
including removal of wooden battens,
repairs to the edges of plaster panel and
finishing the groove complete as per
specifications.

13.77 Extra for using white cement in place of sqm 135.03


ordinary cement in the top layer of the
item of washed stone grit, plaster.

13.78 Providing and applying 12mm thick (average) sqm 427.05


premixed formulated one coat gypsum
lightweight plaster having additives and
light weight aggregates as vermiculite /
perlite respectively conforming to IS :
2547 (Part - 1 & II) 1976, applied on
hacked / uneven background such as bare
brick / block / RCC work on walls & ceiling
at all floors and locations, finished in
smooth line and level etc. complete.

Puducherry Region
14. Repairs To Buildings
Page No.: 292
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

14.1.1 Repairs to plaster of thickness 12mm to sqm 276.95


20mm in patches of area 2.5 sq. metres and
under including cutting the patch in proper
shape, raking out joints and preparing and
plastering the surface of the walls
complete including disposal of rubbish to
the dumping ground within 50 metres lead -
With cement mortar 1:4 (1 cement : 4 fine
sand)

14.1.2 Repairs to plaster of thickness 12mmto 20mm sqm 270.93


in patches of area 2.5 sq. metres and under
including cutting the patch in proper
shape, raking out joints and preparing and
plastering the surface of the walls
complete including disposal of rubbish to
the dumping ground within 50 metres lead -
With cement mortar 1:4 (1 cement : 4 coarse
sand)

14.2.1 Fixing chowkhats in existing opening each 871.91


including embedding chowkhats in floors or
walls cutting masonry for holdfasts
embedding hold fasts in cement concrete
blocks with cement concrete 1:3:6 (1 cement
:3 coarse sand : 6 graded stone aggregate
20mm nominal size) painting two coats of
approved wood preservative to sides of
chowkhats and making good the damages to
walls and floors as required complete
including disposal of rubbish to the
dumping ground within 50 metres lead - Door
chowkhats

14.2.2 Fixing chowkhats in existing opening each 539.52


including embedding chowkhats in floors or
walls cutting masonry for holdfasts
embedding hold fasts in cement concrete
blocks with cement concrete 1:3:6 (1 cement
:3 coarse sand : 6 graded stone aggregate
20mm nominal size) painting two coats of
approved wood preservative to sidesof
chowkhats and making good the damages to
walls and floors as required complete
including disposal of rubbish to the
dumping ground within 50 metres lead -
Window chowkhats

14.2.3 Fixing chowkhats in existing opening each 382.75


including embedding chowkhats in floors or
walls cutting masonry for holdfasts
embedding hold fasts in cement concrete

Puducherry Region
14. Repairs To Buildings
Page No.: 293
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

blocks with cement concrete 1:3:6 (1 cement


:3 coarse sand : 6 graded stone aggregate
20mm nominal size) painting two coats of
approved wood preservative to sidesof
chowkhats and making good the damages to
walls and floors as required complete
including disposal of rubbish to the
dumping ground within 50 metres lead -
Clerestory window chowkhats

14.3 Fixing chowkhat in existing opening in chowkhat 144.97


brick / RCC wall with dash fasteners /
chemical fastners of appropriate size (3
nos. on each vertical member of door
chowkhat and 2 nos. on each vertical member
and 1 no. on each horizontal member of
window chowkhat) including cost of dash
fasteners / chemical fasteners.

14.4.1 Making the opening in brick masonry sqm 529.23


including dismantling in floor or walls by
cutting masonry and making good the damages
to walls, flooring and jambs complete to
match existing surface i/c disposal of
mulba / rubbish to the nearest dumping
ground - For door / window / clerestory
window.

14.5.1 Renewing glass panes, with putty and nails sqm 737.79
wherever necessary - Float glass panes of
thickness 4mm

14.5.2 Renewing glass panes, with putty and nails sqm 857.15
wherever necessary - Float glass panes of
thickness 5mm.

14.5.3 Renewing glass panes, with putty and nails sqm 983.13
wherever necessary - Float glass panes of
thickness 6mm.

14.6.1 Renewing glass panes, with wooden fillets sqm 999.44


wherever necessary - Float glass panes of
thickness 4mm.

14.6.2 Renewing glass panes, with wooden fillets sqm 1,118.80


wherever necessary - Float glass panes of
thickness 5mm

14.6.3 Renewing glass panes, with wooden fillets sqm 1,244.78


wherever necessary - Float glass panes of
thickness 6mm

Puducherry Region
14. Repairs To Buildings
Page No.: 294
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

14.7.1 Renewing glass panes and refixing existing sqm 764.52


wooden fillets - Float glass panes of
thickness 4mm.

14.7.2 Renewing glass panes and refixing existing sqm 883.88


wooden fillets - Float glass panes of
thickness 5mm

14.7.3 Renewing glass panes and refixing existing sqm 1,244.78


wooden fillets - Float glass panes of
thickness 6mm

14.8.1 Supplying and fixing new wooden fillets metre 55.93


wherever necessary - Teak wood (Burma)

14.8.2 Supplying and fixing new wooden fillets metre 41.22


wherever necessary - country wood (Padak)

14.9 Renewal of old putty of glass panes metre 26.41


(length)

14.10 Refixing old glass panes with putty and sqm 343.36
nails.

14.11 Fixing old glass panes with wooden fillets sqm 289.75
(excluding cost of fillets)

14.12 Providing and fixing 16mm M.S.Fan clamps of each 263.11


standard shape and size in existing R.C.C.
slab including cutting chase and making
good and painting exposed portion of the
clamps complete.

14.14.1 Replacing sand stone slabs in roofing laid sqm 620.14


in cement mortar 1:4 (1 cement : 4 coarse
sand) including necessary repairs and
cement pointing with same mortar complete
including disposal of rubbish to dumping
ground within 50 metres of lead - Red/White
sand stone slabs 30 to 50mm thick.

14.15.1 Renewing wooden battens in roofs, including cum 1,35,644.43


making good the holes in wall and painting
with oil type wood preservative of approved
brand and manufacture complete including
removal of rubbish to the dumping ground
within 50 metres lead - Country wood
(Vengai)

14.16.1.1 Renewing wooden beams in roofs including Cum 1,03,650.17


making good the holes in walls and painting
with oil type wood preservative of approved

Puducherry Region
14. Repairs To Buildings
Page No.: 295
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

brand and manufacture complete including


removal of rubbish to the dumping ground
within 50 metre lead - Not exceeding 4.00
metres in length - Country wood (Vengai)

14.16.1.2 Renewing wooden beams in roofs including cum 1,12,451.00


making good the holes in walls and painting
with oil type wood preservative of approved
brand and manufacture complete including
removal of rubbish to the dumping ground
within 50 metre lead - Not exceeding 4.00
metres in length - Country wood (Padak)

14.16.2.1 Renewing wooden beams in roofs including Cum 1,13,456.69


making good the holes in walls and painting
with oil type wood preservative of approved
brand and manufacture complete including
removal of rubbish to the dumping ground
within 50 metre lead - Above 4.00 metres
and upto 5.00 metres length - Country wood
(Padak)

14.16.2.2 Renewing wooden beams in roofs including cum 1,04,678.21


making good the holes in walls and painting
with oil type wood preservative of approved
brand and manufacture complete including
removal of rubbish to the dumping ground
within 50 metre lead - Above 4.00 metres
and upto 5.00 metres length - Country wood
(Vengai)

14.17 Raking out joints in lime or cement mortar sqm 26.01


and preparing the surface for re-pointing
or replastering including disposal of
rubbish to the dumping ground within 50
metres lead.

14.18.1 Flush pointing with cement mortar 1:3 (1 sqm 60.39


cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight
of cement for flat tile bricks on top of
mud phaska - with F.P.S. brick tiles.

14.18.2 Flush pointing with cement mortar 1:3 (1 sqm 61.78


cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight
of cement for flat tile bricks on top of
mud phaska - with modular brick tiles

14.19 Taking out wind ties from roof including kg 1.93


cutting out rusted bolts, nuts etc. and
removing materials to any distance within

Puducherry Region
14. Repairs To Buildings
Page No.: 296
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

compound and stacking.

14.20 Fixing of old wind tie with new fittings metre 48.92
including painting two or more coats with
anticorrosive bitumastic paint to approved
brand & manufacturer over and including
priming coat of ready mixed zinc chromate
yellow primer of approved brand.

14.21 Renewing bottom rail and/or top rubber of kg 152.71


collapsible gate including making good all
damages and applying priming coat of zinc
chromate yellow primer of approved brand
and manufacturer.

14.22.1 Renewing wrought iron of M.S. wheel or each 107.55


roller of steel door or gate and fitting
and fixing the same with necessary clamps,
nuts and bolts / welding and erection etc.
complete - Wheel 50mm dia and below.

14.22.2 Renewing wrought iron of M.S. wheel or each 172.34


roller of steel door or gate and fitting
and fixing the same with necessary clamps,
nuts and bolts / welding and erection etc.
complete - Wheel above 50mm dia.

14.23 Pumping out water caused by springs, tidal kl 103.88


or river seepage, brocken water mains or
drains and the like.

14.26.1.1 Providing and fixing 25mm thick shutters sqm 5,428.24


for cup board etc - Panelled or panelled &
glazed shutters - Superior class teak wood
including nickel plated bright finished
M.S. piano hinges with necessary screws.

14.26.1.2 Providing and fixing 25mm thick shutters sqm 5,428.24


for cup board etc - Panelled or panelled &
glazed shutters - Teak wood(Burma)
including nickel plated bright finished
M.S. piano hinges with necessary screws.

14.26.2.1 Providing and fixing 25mm thick shutters sqm 5,637.06


for cup board etc. - Glazed shutters -
Superior class teak wood including nickel
plated bright finished MS piano hinges with
necessary screws.

14.26.2.2 Providing and fixing 25mm thick shutters sqm 5,637.06


for cup board etc - Glazed shutters - Teak
wood (Burma) including nickel plated bright

Puducherry Region
14. Repairs To Buildings
Page No.: 297
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

finished M.S. piano hinges with necessary


screws.

14.27.1 Providing and fixing plain jaffri door and sqm 6,876.42
window shutters including bright or/and
black enamelled M.S. butt hinges with
necessary screws 35x10mm laths placed 35mm
apart (frames to be paid separately)
including fixing 50x12mm beading complete
with - Teak wood (Burma)

14.28.1 Providing and fixing curtain rods of 1.25mm metre 284.41


thick brass plates with two brass brackets
fixed with brass screws and wooden plugs
etc. wherever necessary complete - 20mm
diameter.

14.28.2 Providing and fixing curtain rods of 1.25mm metre 344.69


thick brass plates with two brass brackets
fixed with brass screws and wooden plugs
etc. wherever necessary complete - 25mm
diameter.

14.29 Providing and fixing M.S. round or square kg 74.07


bars with M.S. flats at required spcing in
wooden frames of windows and clerestory
windows.

14.30.1 Providing joists (karries) including cum 99,868.43


hoisting fixing in position and applying
wood preservative on unexposed surface etc.
complete with - Country wood (Vengai)

14.30.2 Providing joists (karries) including cum 1,08,550.50


hoisting fixing in position and applying
wood preservative on unexposed surface etc.
complete with - Country wood (Padak)

14.31.1 Providing and fixing bright finished brass each 404.13


single acting spring hinges with necessary
screws etc. complete - 150mm

14.31.2 Providing and fixing bright finished brass each 361.93


single acting spring hinges with necessary
screws etc. complete - 125mm

14.31.3 Providing and fixing bright finished brass each 275.37


single acting spring hinges with necessary
screws etc. complete - 100mm

14.32.1 Providing and fixing bright finished brass each 615.12


double acting spring hinges with necessary

Puducherry Region
14. Repairs To Buildings
Page No.: 298
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

screws etc. complete - 150mm

14.32.2 Providing and fixing bright finished brass each 422.21


double acting spring hinges with necessary
screws etc. complete - 125mm

14.32.3 Providing and fixing bright finished brass each 353.73


double acting spring hinges with necessary
screws etc. complete - 100mm

14.33.1 Providing and fixing bright finished brass each 227.87


flush bolts with necessary screws etc.
complete. - 250mm

14.33.2 Providing and fixing bright finished brass each 177.83


flush bolts with necessary screws etc.
complete. - 150mm

14.33.3 Providing and fixing bright finished brass each 129.61


flush bolts with necessary screws etc.
complete - 100mm

14.34 Providing and fixing 150mm bright finished each 265.98


floor brass door stopper with rubber
cushion, screws etc. to suit shutter
thickness complete.

14.35.1 Providing and fixing bright finished brass each 81.38


hard drawn hooks and eyes - 300mm

14.35.2 Providing and fixing bright finished brass each 78.37


hard drawn hooks and eyes - 250mm

14.35.3 Providing and fixing bright finished brass each 71.13


hard drawn hooks and eyes - 200mm

14.35.4 Providing and fixing bright finished brass each 62.09


hard drawn hooks and eyes - 150mm

14.35.5 Providing and fixing bright finished brass each 51.84


hard drawn hooks and eyes - 100mm

14.36 Providing and fixing bright finished brass each 77.76


fan light pivot with necessary screws etc.
complete.

14.37 Providing and fixing 300mm long bright each 59.08


finished brass chain with hook for fan
light including necessary screws etc.
complete.

14.38 Providing and fixing bright finished brass each 139.85

Puducherry Region
14. Repairs To Buildings
Page No.: 299
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

quadrant stay 300mm long with necessary


screws etc. complete.

14.39 Providing and fixing bright finished brass each 354.22


helical door spring (superior quality)

14.40.1 Providing and fixing chromium plated brass each 164.21


butt hinges with necessary screws etc.
complete - 125x70x4mm (Ordinary type)

14.40.2 Providing and fixing chromium plated brass each 146.49


butt hinges with necessary screws etc.
complete - 100x70x4mm (Ordinary type)

14.40.3 Providing and fixing chromium plated brass each 135.63


butt hinges with necessary screws etc.
complete - 75x65x4mm (heavy type)

14.40.4 Providing and fixing chromium plated brass each 75.35


butt hinges with necessary screws etc.
complete - 75x40x2.5mm (Ordinary type)

14.40.5 Providing and fixing chromium plated brass each 49.31


butt hinges with necessary screws etc.
complete - 50x40x2.5mm (Ordinary type)

14.41 Providing and fixing 85x42mm chromium each 256.04


plated brass pull bolt lock with necessary
screws, nuts, bolts and washers etc.
complete.

14.42.1 White washing with lime to give an even sqm 8.99


shade - Old work (two or more coats).

14.42.2 White washing with lime to give an even sqm 5.57


shade - Old work (one or more coats).

14.43 Removing white or colour wash by scrapping sqm 7.23


and sand papering and preparing the surface
smooth including necessary repairs to
scratches etc. complete.

14.44 Distempering with dry distemper of approved sqm 33.35


brand and manufacture (one or more coats)
and of required shade on old work to give
an even shade.

14.45.1 Distempering with oil bound washable sqm 36.39


distemper of approved brand and manufacture
to give an even shade - Old work (one or
more coats).

Puducherry Region
14. Repairs To Buildings
Page No.: 300
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

14.46 Removing dry or oil bound distemper, water sqm 9.44


proofing cement paint and the like by
scrapping, sand papering and preparing the
surface smooth including necessary repairs
to scratches etc. complete.

14.47.1 Painting on G.S. sheet with synthetic sqm 46.20


enamel paint of approved brand and
manufacture of required colour to give an
even shade - Old work (one or more coats)

14.48.1 Painting (two or more coats) on rain water, metre 29.81


soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint
of approved brand and manufacture over and
including a priming coat of ready mixed
zinc chromate yellow primer on new work -
75mm diameter pipes

14.49.1 Painting (one or more coats) on rain water, metre 13.84


soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint
of approved brand and manufacture on old
work - 75mm diameter pipes

14.50.1 Painting (two or more coats) on rain water, metre 31.82


soil, waste and vent pipes and fittings
with aluminium paint of approved brand and
manufacture over a priming coat of ready
mixed zinc chromate yellow primer on new
work - 75mm diameter pipes

14.51.1 Painting (one or more coats) on rain water, metre 14.92


soil, waste and vent pipes and fittings
with synthetic enamel paint of approved
brand and manufacture and required colour
on old work - 75mm diameter pipes

14.51.2 Painting (one or more coats) on rain water, metre 19.22


soil, waste and vent pipes and fittings
with synthetic enamel paint of approved
brand and manufacture and required colour
on old work - 100mm diameter pipes

14.51.3 Painting (one or more coats) on rain water, metre 27.59


soil, waste and vent pipes and fittings
with synthetic enamel paint of approved
brand and manufacture and required colour
on old work - 150mm diameter pipes

14.52.1 Painting with oil type wood preservative of sqm 22.82


approved brand and manufacture - Old work

Puducherry Region
14. Repairs To Buildings
Page No.: 301
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

(one or more coats).

14.53.1 Wall painting with plastic emulsion paint sqm 55.15


of approved brand and manufacture to give
an even shade - One or more coats on old
work.

14.53.1A Wall painting with plastic emulsion paint - sqm 68.79


Royal of approved brand and manufacture to
give an even shade - One or more coats on
old work

14.53.1B Wall painting with plastic emulsion paint - sqm 59.55


Premium of approved brand and manufacture
to give an even shade - One or more coats
on old work

14.53.1C Wall painting with plastic emulsion paint - sqm 55.15


Commercial of approved brand and
manufacture to give an even shade - One or
more coats on old work

14.54.1 Painting with synthetic enamel paint of sqm 51.99


approved brand and manufacture of required
colour to give an even shade - One or more
coats on old work.

14.55.1 Painting with aluminium paint of approved sqm 49.82


brand and manufacture to give an even shade
- One or more coats on old work.

14.56.1 Painting with acid proof paint of approved sqm 61.27


brand and manufacture of required colour to
give an even shade - One or more coats on
old work.

14.57 Painting with black anti-corrosive sqm 46.37


bitumastic paint of approved brand and
manufacture to give an even shade - One or
more coats on old work.

14.58.1 French spirit polishing - One or more coats sqm 106.49


on old work.

14.59.1 Polishing on wood work with ready made wax sqm 48.53
polish of approved brand and manufacture -
Old work

14.60 Re-lettering with black Japan paint of unit 1.74


approved brand and manufacture.(Cost for 1
letter of 1 cm height)

Puducherry Region
14. Repairs To Buildings
Page No.: 302
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

14.61 Painting (one or more coats) with black sqm 44.82


Japan paint of approved brand and
manufacture to give an even shade.

14.62.1 Providing and fixing C.P. brass chain and each 270.19
rubber plug complete for sink or wash basin
- 32mm dia

14.62.2 Providing and fixing C.P. brass chain and each 306.37
rubber plug complete for sink or wash basin
- 40mm dia

14.63.1 Distempering with 1st quality acrylic sqm 32.75


washable distemper (ready made) of approved
manufacturer and or required shade and
colour complete, as per manufacturer's
specification - One or more coats on old
work.

14.64.1 Finishing walls with water proofing cement sqm 63.97


paint of required shade - Old work (one or
more coats applied @ 2.20 kg/10 sqm) over
priming coat of primer applied @ 0.80
litres/10 sqm complete including cost of
priming coat.

14.65.1 Finishing walls with textured exterior sqm 121.51


paint of required shade - Old work (Two or
more coats on existing cement paint surface
applied @ 3.28 lts/10 sqm.)

14.65.2 Finishing walls with textured exterior sqm 74.44


paint of required shade - Old work (One or
more coats) applied @ 1.82 lts/10 sqm.)

14.66.1 Finishing walls with Acrylic Smooth sqm 66.42


exterior paint of required shade - Old work
(Two or more coats applied @ 1.67 lts/10
sqm.) on existing cement paint surface

14.66.2 Finishing walls with Acrylic Smooth sqm 43.97


exterior paint of required shade - Old work
(One or more coat applied @ 0.90 lts/10
sqm.)

14.67.1 Finishing walls with Premium Acrylic Smooth sqm 82.00


exterior paint of required shade - Old work
(Two or more coats applied @ 1.43 lts/10
sqm) over existing cement paint surface.

14.67.2 Finishing walls with Premium Acrylic Smooth sqm 53.68


exterior paint with Silicone additives of

Puducherry Region
14. Repairs To Buildings
Page No.: 303
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

required shade - Old work (one or more


coats applied @ 0.83 ltr/10 sqm)

14.68.1 Painting (one or more coats) on rain water, metre 18.23


soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint
of approved brand and manufacture on old
work - 100mm diameter pipes

14.68.2 Painting (one or more coats) on rain water, metre 26.19


soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint
of approved brand and manufacture on old
work - 150mm diameter pipes

14.69.1 Varnishing with varnish of approved brand sqm 54.24


and manufacture - One or more coats with
copal varnish

14.69.2 Varnishing with varnish of approved brand sqm 58.06


and manufacture - One or more coats with
spar varnish

14.70 Melamine polishing on wood work (one or sqm 75.68


more coats)

14.71 Varnishing with flatting varnish of sqm 56.80


approved brand and manufacture one or more
coats on old work.

14.72 Providing and fixing double scaffolding sqm 178.88


system (cup lock type) on the exterior
side, upto seven story height made with
40mm dia M.S. tube 1.5m centre to centre
horizontal & vertical tubes joining with
cup & lock system with M.S. tubes, M.S.
tube challies, M.S. clamps and M.S.
staircase system in the scaffolding for
working platform etc. and maintaining it is
a serviceable condition for the required
duration as approved and removing it there
after. The scaffolding system shall be
stiffened with bracings, runners,
connection with the building etc. wherever
required for inspection of work at required
locations with essential safety features
for the workmen etc. complete as approved.
The elevational area of the scaffolding
shall be measured for payment purpose. The
payment will be made once irrespective of
duration of scaffolding. (To be used for
maintenance work judicially necessary

Puducherry Region
14. Repairs To Buildings
Page No.: 304
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

deduction for scaffolding in the existing


item to be done)

Puducherry Region
15. Dismantling And Demolishing
Page No.: 305
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

15.1 Demolishing lime concrete manually / by cum 305.77


mechanical means and disposal of material
within 50 metres lead.

15.2.1 Demolishing cement concrete manually / by cum 883.99


mechanical means including disposal of
material within 50 metres lead - 1:3:6 or
richer mix.

15.2.2 Demolishing cement concrete manually / by cum 542.55


mechanical means including disposal of
material within 50 metres lead - 1:4:8 or
leaner mix.

15.3 Demolishing R.C.C. work, including stacking cum 1,297.61


of steel bars and disposal of unserviceable
material within 50 metres lead.

15.4 Demolishing R.B. work manually / by cum 1,153.30


mechanical means including stacking of
steel bars and disposal of unserviceable
material within 50 metres lead.

15.5 Extra for cutting reinforcement bars sqm 432.13


manually / by mechanical means in R.C.C. or
R.B. work (Payment shall be made on the
cross sectional area of R.C.C. or R.B.
work).

15.6 Extra for scrapping, cleaning and kg 3.45


straightening reinforcement from R.C.C. or
R.B. work.

15.7.1 Demolishing brick work, manually / by cum 251.77


mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres
lead - in mud mortar.

15.7.2 Demolishing brick work, manually / by cum 646.98


mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres
lead - In lime mortar with old mughal
bricks.

15.7.3 Demolishing brick work, manually / by cum 305.77


mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres
lead - In lime mortar.

Puducherry Region
15. Dismantling And Demolishing
Page No.: 306
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

15.7.4 Demolishing brick work, manually / by cum 739.69


mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres
lead - In cement mortar.

15.8.1 Removing mortar from bricks and cleaning no. 1.74


bricks including stacking within a lead of
50m (stacks of cleaned bricks shall be
measured) - From brick work in mud mortar.

15.8.2 Removing mortar from bricks and cleaning no. 2.07


bricks including stacking within a lead of
50m (stacks of cleaned bricks shall be
measured) - From brick work in lime mortar.

15.8.3 Removing mortar from bricks and cleaning no. 2.63


bricks including stacking within a lead of
50m (stacks of cleaned bricks shall be
measured) - From brick work in cement
mortar.

15.9.1 Demolishing stone rubble masonry manually / cum 416.68


by mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metre lead
- In lime mortar.

15.9.2 Demolishing stone rubble masonry manually / cum 883.47


by mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metre lead
- In cement mortar.

15.10.1 Dismantling dressed stone work ashlar face cum 527.31


stone work, marble work or precast concrete
work manually / by mechanical means
including stacking of serviceable and
disposal of unserviceable material within
50 metre lead - In lime mortar.

15.10.2 Dismantling dressed stone work ashlar face cum 1,034.17


stone work, marble work or precast concrete
work manually / by mechanical means
including stacking of serviceable and
disposal of unserviceable material within
50 metre lead - In cement mortar.

15.11.1 Removing mortar from and cleaning stones cum 179.53


and concrete articles (net quantity of
stacks of cleaned material will be
measured) - In lime mortar.

Puducherry Region
15. Dismantling And Demolishing
Page No.: 307
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

15.11.2 Removing mortar from and cleaning stones cum 257.52


and concrete articles (net quantity of
stacks of cleaned material will be
measured) - In cement mortar.

15.12.1 Dismantling doors, windows and clerestory each 148.41


windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc.
complete and stacking within 50 m lead - Of
area 3 sq. metres and below.

15.12.2 Dismantling doors, windows and clerestory each 202.76


windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc.
complete and stacking within 50 m lead - Of
area beyond 3 sq. metre.

15.13.1 Taking out doors, windows and clerestory each 59.09


window shutters (steel or wood) including
stacking within 50m lead - Of area 3 sq.
metre and below.

15.13.2 Taking out doors, windows and clerestory each 78.47


window shutters (steel or wood) including
stacking within 50m lead - Of area beyond 3
sq. metre.

15.14.1 Dismantling wood work in frames, trusses, cum 1,884.93


purlins and rafters upto 10 metre span and
5 metre height including stacking the
material within 50m lead - Of sectional
area 40 square centimetres and above.

15.14.2 Dismantling wood work in frames, trusses, metre 7.54


purlins and rafters upto 10m span and 5m
height including stacking the material
within 50m lead - Of sectional area below
40 square centimetres.

15.15.1 Extra for dismantling trusses, rafters, cum/m span 228.38


purlins etc. of wood work for every
additional span of one metre or part
thereof beyond 10 metres - Of sectional
area 40 sq. centimetres and above.

15.15.2 Extra for dismantling trusses, rafters, metre / m 0.64


purlins etc. of wood work for every span
additional span of one metre or part
thereof beyond 10 metres - Of sectional
area below 40 sq. centimetres

15.16.1 Extra of dismantling trusses, rafters, cum/metre 326.65

Puducherry Region
15. Dismantling And Demolishing
Page No.: 308
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

purlins etc. of wood work for every height


additional height of one metre or part
thereof beyond 5 metres - Of sectional area
40 square centimetres and above.

15.16.2 Extra of dismantling trusses, rafters, metre / m 1.28


purlins etc. of wood work for every height
additional height of one metre or part
thereof beyond 5 metres - Of sectional area
below 40 square centimetres.

15.17.1 Dismantling steel work in single sections kg 1.21


including dismembering and stacking within
50 metre lead in - R.S. Joists.

15.17.2 Dismantling steel work in single sections kg 0.84


including dismembering and stacking within
50m lead in - Channels, angles, tees and
flats.

15.18 Dismantling steel work in built up sections kg 2.05


in angles, tees, flats and channels
including all gusset plates, bolts, nuts,
cutting rivets, welding etc. including
dismembering and stacking within 50 metre
lead.

15.19 Dismantling steel work manually / by kg 1.38


mechanical means in built up sections
without dismembering and stacking within
50m lead.

15.20 Extra for dismantling trusses, rafters, kg/ m span 0.31


purlins etc. of steel work for every
additional span of one metre or part
thereof beyond 10 metres.

15.21 Extra for dismantling trusses, rafters, kg/ m heig 0.31


purlins etc. of steel work for every ht
additional height of one metre or part
thereof beyond 5 metres.

15.22 Extra for marking of structural steel work kg 1.57


required to be re-erected.

15.23.1 Dismantling tile work in floors and roofs sqm 31.25


laid in cement mortar including stacking
material within 50m lead - For thickness of
tiles above 10mm and upto 25mm.

15.23.2 Dismantling tile work in floors and roofs sqm 50.35


laid in cement mortar including stacking

Puducherry Region
15. Dismantling And Demolishing
Page No.: 309
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

material within 50m lead - For thickness of


tiles above 25mm and upto 40mm.

15.24 Demolishing dry brick pitching in floors, cum 463.90


drains etc. including stacking serviceable
material and disposal of unserviceable
material within 50m lead.

15.25 Dismantling stone slab flooring laid in sqm 97.12


cement mortar including stacking of
serviceable material and disposal of
unserviceable material within 50m lead.

15.26 Demolishing brick tile covering in sqm 46.63


terracing including stacking of serviceable
material and disposal of unserviceable
material within 50m lead.

15.27 Demolishing mud phaska in terracing and cum 322.90


disposal of material within 50m lead.

15.28.1 Dismantling roofing including ridges, hips sqm 67.13


valleys and gutters etc. and stacking the
material within 50m lead of - G.S.Sheet.

15.28.2 Dismantling roofing including ridges, hips sqm 31.27


valleys and gutters etc. and stacking the
material within 50m lead of - Asbestos
Sheet.

15.29 Dismantling stone slab roofing over wooden sqm 971.16


karries or R.C.C. battens (dismantling
karries and battens to be paid for
separately) including stacking of
serviceable material and disposal of
unserviceable material within 50m lead.

15.30 Dismantling jack arch roofing and floors sqm 91.38


including stacking of serviceable material
and disposal of unserviceable material
within 50m lead.

15.31 Dismantling tiled roofing with battens sqm 77.49


boarding etc. complete including stacking
of serviceable material and disposal of
unserviceable material within 50m lead.

15.32 Demolishing thatch roofing including mats, sqm 21.60


bamboo, jaffari etc. complete including
stacking of serviceable material and
disposal of unserviceable material within
50m lead

Puducherry Region
15. Dismantling And Demolishing
Page No.: 310
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

15.33 Dismantling wooden bailies in posts and metre 7.50


struts including stacking within 50m lead.

15.34.1 Dismantling and stacking within 50m lead, each 97.33


fencing posts or struts including all earth
work and dismantling of concrete etc. in
base of - "T" or "L" iron or pipe.

15.34.2 Dismantling and stacking within 50m lead, each 110.37


fencing posts or struts including all earth
work and dismantling of concrete etc. in
base of - R.C.C.

15.35 Cutting bailies or wooden posts of fencing bailie 8.77


at the point of projection above the
concrete or ground and stacking the same
within 50m lead.

15.36 Dismantling barbed wire or flexible wire quintal 1,361.56


rope in fencing including making rolls and
stacking within 50m lead.

15.37 Dismantling wooden trellis work excluding sqm 25.05


frames but including stacking the
serviceable material within 50m lead.

15.38 Dismantling expanded metal of I.R.C. sqm 28.97


fabrics with necessary battens and beading
including stacking the serviceable material
within 50m lead.

15.39.1 Dismantling wooden boardings in lining of sqm 24.21


walls and partitions, excluding supporting
members but including stacking within 50m
lead - Upto 10mm thick.

15.39.2 Dismantling wooden boardings in lining of sqm 30.97


walls and partitions, excluding supporting
members but including stacking within 50m
lead - Thickness above 10mm upto 25mm

15.39.3 Dismantling wooden boardings in lining of sqm 36.10


walls and partitions, excluding supporting
members but including stacking within 50m
lead - Thickness above 25mm upto 40mm

15.40.1 Dismantling precast concrete or stone slab sqm 109.64


in walls, partition walls etc. including
stacking within 50m lead - Thickness upto
40mm

15.40.2 Dismantling precast concrete or stone slab sqm 164.21

Puducherry Region
15. Dismantling And Demolishing
Page No.: 311
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

in walls, partition walls etc. including


stacking within 50m lead - Thickness above
40mm upto 75mm

15.41 Dismantling cement asbestos, Celotax or sqm 23.55


other hard board ceiling or partition walls
including stacking of serviceable materials
and disposal of unserviceable materials
within 50m lead.

15.42.1 Dismantling C.I. Or asbestos rain water metre 27.10


pipe with fittings and clamps including
stacking the material within 50m lead - 75
to 80mm dia pipe.

15.42.2 Dismantling C.I. Or asbestos rain water metre 27.96


pipe with fittings and clamps including
stacking the material within 50m lead -
100mm dia pipe.

15.42.3 Dismantling C.I. Or asbestos rain water metre 28.80


pipe with fittings and clamps including
stacking the material within 50m lead -
150mm dia pipe.

15.43.1 Dismantling manually / by mechanical means sqm 80.81


including stacking of serviceable material
and disposal of unserviceable material
within 50m lead - Water bound macadam road.

15.43.2 Dismantling manually / by mechanical means sqm 157.42


including stacking of serviceable material
and disposal of unserviceable material
within 50m lead - Bituminous road.

15.44.1 Dismantling G.I. Pipes (external work) metre 56.91


including excavation and refilling trenches
after taking out the pipes manually / by
mechanical means including stacking of
pipes within 50m lead - 15mm to 40mm
nominal bore.

15.44.2 Dismantling G.I. Pipes (external work) metre 64.46


including excavation and refilling trenches
after taking out the pipes manually / by
mechanical means including stacking of
pipes within 50m lead - Above 40mm nominal
bore.

15.45.1 Dismantling C.I. Pipes including excavation metre 145.48


and refilling trenches after taking out the
pipes manually / by mechanical means,

Puducherry Region
15. Dismantling And Demolishing
Page No.: 312
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

breaking lead caulked joints, melting of


lead and making into blocks including
stacking of pipes, lead at site within 50m
lead - Upto 150mm diameter.

15.45.2 Dismantling C.I. Pipes including excavation metre 194.20


and refilling trenches after taking out the
pipes manually / by mechanical means,
breaking lead caulked joints, melting of
lead and making into blocks including
stacking of pipes, lead at site within 50m
lead - Above 150mm dia upto 300mm dia.

15.45.3 Dismantling C.I. Pipes including excavation metre 262.39


and refilling trenches after taking out the
pipes manually / by mechanical means,
breaking lead caulked joints, melting of
lead and making into blocks including
stacking of pipes, lead at site within 50m
lead - Above 300mm diameter.

15.46.1 Dismantling steel cylinder R.C. pipes metre 262.39


including excavation and refilling trenches
after taking out the pipes manually / by
mechanical means breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes, lead at
site within 50m lead. - Upto 600mm
diameter.

15.46.2 Dismantling steel cylinder R.C. pipes metre 668.00


including excavation and refilling trenches
after taking out the pipes breaking lead
caulked joints, melting of lead and making
into blocks including stacking of pipes,
lead at site within 50m lead. - Above 600mm
diameter.

15.47.1 Dismantling asbestos cement pressure pipes metre 118.12


including excavation and refilling trenches
after taking out the pipes manually / by
mechanical means and stacking pipes within
50m lead - Upto 150mm diameter.

15.47.2 Dismantling asbestos cement pressure pipes metre 143.01


including excavation and refilling trenches
after taking out the pipes manually / by
mechanical means and stacking pipes within
50m lead - above 150mm diameter.

15.48 Taking out C.I. Cover with frame from each 261.37
R.C.C. top slab of manholes of various

Puducherry Region
15. Dismantling And Demolishing
Page No.: 313
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sizes including demolishing of R.C.C. work


manually / by mechanical means and stacking
of usefull materials near the site and
disposal of unserviceable materials within
50m lead.

15.49 Taking out C.I. Cover with frame from each 153.44
R.C.C. top slab of inspection chambers of
various sizes including demolishing of
R.C.C. work manually / by mechanical means
and stacking of useful materials near the
site and disposal of unserviceable
materials within 50m lead.

15.50 Dismantling of R.C.C. spun vent shaft each 1,698.49


including excavating the cement concrete
pit completely, taking out the shaft,
refilling the excavated gap, stacking the
useful materials near the site and disposal
of unserviceable materials within 50m lead.

15.51 Dismantling of road gully chamber of each 352.00


various sizes including C.I. Grating with
frame including stacking of useful
materials near the site and disposal of
unserviceable materials into municipal
dumps within 50m lead including refilling
the excavated gap.

15.52 Dismantling of flushing cistern of any size each 381.45


including stacking of useful materials near
the site and disposal of unserviceable
materials within 50m lead

15.53.1 Dismantling of C.I. Sluice valve including each 121.65


stacking of useful materials within a lead
of 50m - Upto 150mm diameter.

15.53.2 Dismantling of C.I. Sluice valve including each 494.07


stacking of useful materials within a lead
of 50m - Above 150mm diameter.

15.54 Dismantling of spindle fire hydrant each 299.00


including stacking of useful materials
within 50m lead.

15.55.1 Dismantling of cement concrete platform each 397.26


along with curtain walls and base concrete
etc. including stacking of useful materials
near the site and disposal of unserviceable
materials within 50m lead - 120x120cm
(outside to outside)

Puducherry Region
15. Dismantling And Demolishing
Page No.: 314
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

15.55.2 Dismantling of cement concrete platform each 609.93


along with curtain walls and base concrete
etc. including stacking of useful materials
near the site and disposal of unserviceable
materials within 50m lead - 210x120cm
(outside to outside)

15.55.3 Dismantling of cement concrete platform each 862.80


along with curtain walls and base concrete
etc. including stacking of useful materials
near the site and disposal of unserviceable
materials within 50m lead - 320x120cm
(outside to outside)

15.56 Dismantling old plaster or skirting raking sqm 19.45


out joints and cleaning the surface for
plaster including disposal of rubbish to
the dumping ground within 50m lead.

15.57 Dismantling aluminium / Gypsum partitions, sqm 23.56


doors, windows, fixed glazing and false
ceiling including disposal of unserviceable
surplus material and stacking of
serviceable material within 50m lead.

15.58 Demolishing C.C. / R.C.C. work by cum 1,496.37


mechanical means and stockpiling at
designated locations and disposal of
dismantled materials upto a lead of 1000m,
stacking serviceable and unserviceable
material separately including cutting
reinforcement bars.

15.59 Dismantling of flexible pavement cum 287.30


(bituminous courses) by mechanical means
and disposal of dismantled material upto a
lead of 1000m.

Puducherry Region
16. Miscellaneous Building Work
Page No.: 315
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

16.1 Making plinth protection 50mm thick of sqm 396.41


cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20mm
nominal size) over 75mm bed of dry brick
ballast 40mm nominal size well rammed and
consolidated and grouted with fine sand
including finishing the top smooth.

16.2.1 Making plinth protection with bricks of sqm 843.96


class designation 35 laid on edge in cement
mortar 1:6 (1 cement : 6 coarse sand ) with
12 mm thick bed of cement mortar 1:6 (1
cement : 6 coarse sand ) over 75mm bed of
dry brick aggregate 40mm nominal size
rammed, consolidated and grouted with fine
sand and the top of bricks pointed with
cement mortar 1:3 (1 cement : 3 fine sand)

16.8.1 Brick edging laid lengthwise with half metre 33.91


brick depth including excavation, refilling
and disposal of surplus earth lead upto 50
metre - with FPS brick of class designation
75.

16.13.2 Half brick masonry with bricks of class sqm 649.98


designation 35 in superstructure above
plinth level upto floor V level in cement
mortar 1:4 (1 cement: 4 coarse sand)

16.15.1 Supplying at site : R.C.C standards post cum 20,403.66


/struts/rails/pales of mix 1:1.5:3 (1
cement : 1.5 coarse aggregate: 3 graded
stone aggregate 12.5 mm nominal size ) with
wooden plugs or 6mm bar nibs,wherever
required as per direction of Engineer in
charge (cost of earth works in excavation,
concrete works to be paid separately)

16.15.2 supplying at site: Welded steel wire fabric sqm 421.97


of required width rectangular mesh painted
with two or two or more coats of enamel
paint of approved shade over a coat of
primer (painting to be paid for separately)

16.16 Supplying and fixing turn buckles and set 110.66


straining bolts for barbed wire fencing

16.17.1 Fencing with R.C.C post placed at required metre 10.20


distance, embedded in cement concrete
blocks, every 15th post, last but one end
post and corner post shall be strutted on
both sides and end post one side only ,

Puducherry Region
16. Miscellaneous Building Work
Page No.: 316
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

provided with horizontal lines and two


diagonals of barbed wire 9.38kg per 100
metres (min) between the two posts fitted
and fixed with G.I staples on wooden plugs
or G.I binding wire tied to 6mm bar nibs
fixed while casting the post (cost of
R.C.C.posts ,struts , earth work and
concrete to be paid for separately ):-
Payment to be made per metre cost of total
length of barbed wire used - with G.I
barbed wire.
Length

16.18.1 Fencing with angle iron post placed at Metre 13.43


required distance embedded in cement
concrete blocks, every 15th post, last but
one end post and corner post shall be
strutted on both sides and end post on one
side only and provided with horizontal two
diagonals interwoven with horizontal wires,
of barbed wire 9.38kg per 100m (minimum )
between the two posts fitted and fixed with
G.I staples , turn buckles etc.complete
(cost of posts struts, earth work and
concrete work to be paid for separately):-
Payment to be made per metre cost of total
length of barbed wire used.-with G.I barbed
wire

16.19 Supplying at site Angle iron post & strut kg 68.02


of
required size including bottom to be split
and bent at right angle in opposite
direction for 10cm length and drilling
holes upto 10mm dia etc..complete

16.20 Welded steel wire fabric fencing with posts sqm 27.95
of specified material and of standard and
embedded in cement concrete blocks
45x45x60cm of mix 1:5:10 (1cement :5 fine
sand 10 graded stone aggregate 40mm nominal
size) every 15th post, last but one end
post and corner post shall be strutted on
both sides and end post on one side only
and struts embedded in cement cement
concrete blocks 70x45x50cm of the same mix
, provided with welded steel wire fabric
fixed between the posts fitted and fixed
with G.I staples on wooden plugs or tied
to 6mm bar nibs with G.I binding wire (cost
of posts , welded steel fabric, painting
,earth work in excavation and concrete to

Puducherry Region
16. Miscellaneous Building Work
Page No.: 317
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

be paid for separately):

16.42 Cement concrete 1:2:4 (1cement : 2coarse cum 5,498.01


sand : 4 graded stone aggregate 40mm
nominal size) in pavements, laid to
required slope and camber in panels as
required including consolidation finishing
and tamping complete.

16.63 Providing wall black board with cement sqm 486.64


mortar 1:3 (1 cement :3 sand) finishing
with a floating coat of neat cement and
charcoal powder mixed in the proportion 1:2
(1 cement : 2 charcoal powder) and applying
one coat of black board paint including
20mm thick cement plaster band 50mm wide in
cement mortar 1:3 (1 cement : 3 sand)

16.65 Providing and fixing glazed black board of sqm 4,294.87


required size using 5mm thick plain glass
sheet front face finely ground and fixed in
teak wood (Burma) frames of cross section
100x40 mm size made to the specified shape
alround fixed with 3mm wooden fillets and
stiffened at the rear side with teak wood
reepers of size 45x18 mm along the height
of board at the specified spacing at 45 cm
c/c approximately and fixing in portion in
the wall face with teak wood plugs and
screws at an interval of 90cm approximately
alround the frame including the cost of
plugs screws etc. The rate shall also
include painting the smooth face of glass
(rear face of the glass board) and rear
face of frame polishing the frame (front
face ) roughing the front face of glass
black board etc.complete . (Black board
shall be measured internally for the
purpose of payment).

16.68 Providing and laying 60mm thick factory sqm 583.80


made cement concrete interlocking paver
blockof M-30 grade made by block making
machine with strong vibratory compaction
and of approved size and design /shape laid
in required colour and pattern over and
including 50mm thick compacted bed of
course sand, filling the joints with coarse
sand etc.fillng the joints with course sand
etc.all complete

16.70.1 Providing and fixing G.I chain link fabric sqm 598.56

Puducherry Region
16. Miscellaneous Building Work
Page No.: 318
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

fencing of required width in mesh size


50x50mm including strengthening with 2mm
dia wire or nuts , bolts and washers as
required complete as per the direction of
in charge - Made of G.I wire of dia 4mm

16.70.2 Providing and fixing G.I chain link fabric sqm 571.98
fencing of required width in mesh size
50x50mm including strengthening with 2mm
dia wire or nuts, bolts and washers as
required complete as per the direction of
Engineer-in- charge - Made of G.I wire of
dia 4mm,PVC coated to achieve outer dia not
less than 5mm in required colour and shade.

16.71 Providing and fixing G.I chain link fabric sqm 674.36
fencing of required width in mesh size
25x25mm made of G.I wire of dia 3mm
including strengthening with 2mm dia wire
or nuts , bolts and washers as required
complete

16.75 Providing and laying C.C pavemnt of mix cum 7,937.55


M25 wtth ready mixed concrete from batching
plant .The ready mixed concrete shall be
laid and finished with screed board
vibrator, vaccum dewatering proces and
finally finished by floating brooming with
wire brush etc complete (The panel
shuttering work shall be paid for
separately).

16.89 Providing wall black board with cement sqm 549.63


mortar 1:3 (1 cement : 3 sand) finishing
with a floating coat of neat cement and
black pigment mixed in the proportion 1:2
(one cement : two black pigment ) and
applying one coat of black board paint
including 20mm thick cement plaster band
50mm wide in cement mortar 1:3 (1 cement :3
sand)

16.90 Poilshing the existing mosaic floor with sqm 145.27


power polisher to a high degree of polish
as to be perfectly smooth .

16.94 Supplying fixing and commisioning of each 4,581.42


Suguna/ Texmo /Sharp 0.5 HP monoblock
pumpset slow speed single phase motor. The
rate include the cost of pumpset , pumpset
fixing in position and test run etc.
complete .

Puducherry Region
16. Miscellaneous Building Work
Page No.: 319
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

16.95 Supplying fixing and commisioning of each 5,576.07


Suguna/ Texmo /Sharp 1 HP monoblock pumpset
slow speed single phase motor. The rate
include the cost of pumpset , pumpset
fixing in position and test run etc.
complete .

16.96 Supplying fixing and commisioning of each 13,864.83


Suguna/ Texmo /Sharp 2HP monoblock pumpset
slow speed single phase motor. The rate
include the cost of pumpset , pumpset
fixing in position and test run etc.
complete .

16.97 Providing and fixing PVC false roofing with sqm 964.51
the existing PVC cabin using sintex PVC
section of size 6mm x 250mm, having
interlocking facilities supported in the
PVC extruded multi chamber frame section of
40 x 48mm, with necessary MS / Stainless
screws. The rate includes the cost of
sintex PVC section, labour charges for
fixing transport etc.,Complete.

16.98 Providing and fixing 20mm, thick PVC sqm 2,531.84


shutter for doors , windows , cupboard
etc., made of rigid PVC extruded multi
chamber section of size 20mm x200mm, and
outer edges of shutter framed with PVC
channel section of size 24mm x 59mm, having
interlocking facilities. The door frame of
extruded PVC section size 40mm x 48mm,
having a maximum wall thickness 2.80mm +/-
0.30mm.The corners and joints shall be
mitrecut and welded . The rate shall
include the cost of necessary hinges ,
handles and locking facilities wherever
necessary.

16.99 Supplying and fixing in position precast sqm 1,048.91


reinforced concrete door and window frames
using concrete not less than M20 grade ,
cross section of 60 x 100mm on 70 x 75 mm
for window frames and door frames and door
frames of single shutter door and 60 x
120mm size for double shutter door , with
steel reinforcement of minimum 3 bars of
6mm dia or equivalent of about 1.5% of the
sectional area of the concrete member ,
with smooth surface finish , using 3nos of
10mm dia bolt as hold fast on each side ,
along with suitable arrangements for fixing

Puducherry Region
16. Miscellaneous Building Work
Page No.: 320
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of hinges either with aluminium sleeve


/wooden block or attaching the hinge
directly to the frame by using 6mm dia
m.s.bolt. Suitable arrangement should also
be made in the frame for receiving tower
bolt , sliding bolt and other door or
window fixtures. The lost include the
erection of the frame in position and
grouting the joints with cement slurry
1:1.5 (One cement and One and half sand )
complete . The item should be executed
according to is 6523-1983.

16.100 Acid cleaning for the existing Mosaic sqm 48.60


floors, glazed tiles work and removing the
stains and decays to give a glassy look etc
complete (The acid used shall be 32%
concentrated hydrochloric acid after taking
on the precautionary measures)

16.114 Providing and fixing 19mm thick plain sqm 54.26


thermocole for vertical expansion joints

16.115 Applying two coats of cement based polymer sqm 198.93


modified bonding admixture (FOSROC or
equivalent ) over the existing RCC members
after removing the plastering and cleaning
the concrete surfaces and saturated with
clean water. The cost including all
materials labour charges.

16.117 Supply and fixing of side hung window at sqm 9,620.98


all levels made out of unplasticised Poly
vinyl chloride frame from approved make of
natural colour with casement outer frame of
size 56x48x30mm , shutter frame 66x56x30mm
with wall thickness of 1.8mm (+/-0.3mm) and
5mm thick , clear glass . The gasket should
be made of EPDM (Ethylene propylene
dimonomer) with double gasket sealing and
applying silicone sealants outside and
acrylic sealent inside. The sections should
be reinforced with GI sheet of 1.5mm thick
with suitable drainage grouting including
all necessary hardware fittings etc., all
complete as per arcchitectural drawings and
the engineer -in - charge.

16.118 Supply and fixing of sliding windows at all sqm 7,836.64


levels made out from Unplasticised Poly
vinyl chloride frame (UPVC) of natural
colour (PRISTINE WHITE) with outer frame of

Puducherry Region
16. Miscellaneous Building Work
Page No.: 321
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

size 40x56x40mm / 102x56x40mm and for


shutter frame of size 53x38x37mm for two
track / three track sliding windows , with
wall thickness of 1.8mm (+/-0.3mm).The
section should be single glazing using
(flush catch) single point locking. The
gasket should be made of EPDM (Ethylene
propylene dimonomer) and applying silicone
sealants (GE make or wacker make) outside
and acrylic sealent inside including single
glazing of 5mm thick clear float glass. The
sections should be reinforced with GI sheet
of 1.5mm thick with suitable drainage
grouting.

Puducherry Region
17. Sanitary Installation
Page No.: 322
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.1.1 Providing and fixing water closet squatting pan 3,930.48


pan (Indian type W.C.pan) with 100mm sand
cast iron P or S trap, 10 litre low level
white P.V.C . Flushing cistern with
manually controlled device (handle lever)
conforming to IS : 7231, with all fittings
and fixtures complete including cutting and
making good the walls and floors wherever
required : white vitreous china orissa
pattern W.C .pan of size 580X 440mm with
integral type foot rests.

17.1.2 Providing and fixing water closet squatting pan 7,487.11


pan (Indian type W.C.pan) with 100mm sand
cast iron ,P or S trap 10 litre low level
white P.V.C . Flushing cistern with
manually controlled device (handle lever)
conforming to IS : 7231, with all fittings
and fixtures complete including cutting and
making good the walls and floors wherever
required : Stainless steel AISI -304(18/8)
Orissa pattern W.C.pan of size 585x480mm
with flush pipe and integrated type foot
rests.

17.2.1 Providing and fixing white vitreous china pan 4,207.78


pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low
level white P.V.C. flushing cistern with
manually controlled device (handle lever,
conforming to IS: 7231, with all fittings
and fixtures complete) including cutting
and making good the walls and floors
wherever required.
W.C pan with ISI marked white solid plastic
seat and lid.

17.2.2 Providing and fixing white vitreous china pan 4,195.72


pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low
level white P.V.C. flushing cistern with
manually controlled device (handle lever)
conforming to IS 7231, with all fittings
and fixtures complete including cutting and
making good the walls and floors wherever
required - WC pan with ISI marked black
solid plastic seat and lid.

17.3.1 Providing and fixing white vitreous china pan 12,421.49


pedestral type water closet (European
type)with seat and lid,10 litre low level
white vitreous china flushing cistern &C.P

Puducherry Region
17. Sanitary Installation
Page No.: 323
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

flush bend with fittings & CI brackets,


40mm flush bend, overflow arrangement with
specials of standard make and mosquito
proof coupling of approved municipal design
complete including painting of fittings and
brackets, cutting and making good the walls
and floors wherever required. W.C pan with
ISI marked white solid plastic seat and
lid.

17.3.2 Providing and fixing white vitreous china pan 12,409.44


pedestral type water closet (European
type)with seat and lid,10 litre low level
white vitreous china flushing cistern &C.P
flush bend with fittings & CI brackets,
40mm flush bend, overflow arrangement with
specials of standard make and mosquito
proof coupling of approved municipal design
complete including painting of fittings and
brackets, cutting and making good the wall
and floors wherever required. W.C pan with
ISI marked black solid plastic seat and
lid.

17.4.1 Providing and fixing white vitreous china number 3,644.92


flat back or wall corner type lipped front
urinal basin of 430x260x350xmm and
340x410x265mm sizes respectively with
automatic flushing cistern with standard
flush pipe and CP brass spreaders with
brass unions and G.I clamps complete,
including paintings of fittings and
brackets, cutting and making good the walls
and floors wherever required. One urinal
basin with 5 litre white PVC automatic
flushing cistern.

17.4.2 Providing and fixing white vitreous china number 5,551.63


flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and
340x410x265mm sizes respectively with
automatic flushing cistern with standard
flush pipe and CP brass spreaders with
brass unions and G.I clamps complete,
including paintings of fittings and
brackets, cutting and making good the walls
and floors wherever required. Range of two
urinal basins with 5 litre white PVC
automatic flushing cistern.

17.4.3 Providing and fixing white vitreous china no. 7,902.96


flat back or wall corner type lipped front

Puducherry Region
17. Sanitary Installation
Page No.: 324
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

urinal basin of 430x260x350 mm and


340x410x265mm sizes respectively with
automatic flushing cistern with standard
flush pipe and CP brass spreaders with
brass unions and G.I clamps complete,
including paintings of fittings and
brackets, cutting and making good the walls
and floors wherever required. Range of
three urinal basins with 10 litre white PVC
automatic flushing cistern.

17.4.4 Providing and fixing white vitreous china no. 10,707.04


flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with
automatic flushing cistern with standard
flush pipe and CP brass spreaders with
brass unions and G.I clamps complete,
including paintings of fittings and
brackets, cutting and making good the walls
and floors wherever required - Range of
four urinal basins with 10 litre white PVC
automatic flushing cistern.

17.5.1 Providing and fixing white vitreous china no. 6,918.30


flat back half stall urinal of size 580 x
380 x 350 mm with white PVC automatic
flushing cistern, with fittings, standard
size CP brass flush pipe, spreaders with
unions and clamps (all in CP brass) with
waste fitting as per IS: 2556, CI trap with
outlet grating and other couplings in CP
brass including painting of fittings and
cutting and making good the walls and
floors wherever required single half stall
urinal with 5 litre PVC automatic flushing
cistern.

17.5.2 Providing and fixing white vitreous china no. 10,579.94


flat back half stall urinal of size 580 x
380 x 350 mm with white PVC automatic
flushing cistern, with fittings, standard
size CP brass flush pipe, spreaders with
unions and clamps (all in CP brass) with
waste fitting as per IS: 2556, CI trap with
outlet grating and other couplings in CP
brass including painting of fittings and
cutting and making good the walls and
floors wherever required range of two half
stall urinals with 5 litre PVC automatic
flushing cistern.

Puducherry Region
17. Sanitary Installation
Page No.: 325
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.5.3 Providing and fixing white vitreous china no. 13,765.35


flat back half stall urinal of size 580 x
380 x 350 mm with white PVC automatic
flushing cistern, with fittings, standard
size CP brass flush pipe, spreaders with
unions and clamps (all in CP brass) with
waste fitting as per IS: 2556, CI trap with
outlet grating and other couplings in CP
brass including painting of fittings and
cutting and making good the walls and
floors wherever required range of three
half stall urinal with 10 litre PVC
automatic flushing cistern.

17.5.4 Providing and fixing white vitreous china no. 16,489.90


flat back half stall urinal of size 580 x
380 x 350 mm with white PVC automatic
flushing cistern, with fittings, standard
size CP brass flush pipe, spreaders with
unions and clamps (all in CP brass) with
waste fitting as per IS: 2556, CI trap with
outlet grating and other couplings in CP
brass including painting of fittings and
cutting and making good the walls and
floors wherever required range of four half
stall urinal with 10 litre PVC automatic
flushing cistern.

17.6.1 Providing and fixing one piece construction no. 5,353.99


white vitreous china squatting plate with
an integral longitudinal flushing pipe,
white P.V.C. automatic flushing cistern,
with fittings , standard size G.I. flush
pipe for back and front flush with standard
spreader pipes with fittings , G.I. clamps
and C.P. brass coupling complete including
painting of fittings and cutting and making
good the walls and floors etc., wherever
required: - Single squatting plate with 5
litre P.V.C. automatic flushing cistern.

17.6.2 Providing and fixing one piece construction no. 8,036.05


white vitreous china squatting plate with
an integral longitudinal flushing pipe,
white P.V.C. automatic flushing cistern,
with fittings , standard size G.I. flush
pipe for back and front flush with standard
spreader pipes with fittings , G.I. clamps
and C.P. brass coupling complete including
painting of fittings and cutting and making
good the walls and floors etc., wherever
required: - Range of two squatting plates

Puducherry Region
17. Sanitary Installation
Page No.: 326
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with 5 litre P.V.C. automatic flushing


cistern.

17.6.3 Providing and fixing one piece construction no. 10,709.07


white vitreous china squatting plate with
an integral longitudinal flushing pipe,
white P.V.C. automatic flushing cistern,
with fittings , standard size G.I. flush
pipe for back and front flush with standard
spreader pipes with fittings , G.I. clamps
and C.P. brass coupling complete including
painting of fittings and cutting and making
good the walls and floors etc., wherever
required: - Range of three squatting
plates with 10 litre P.V.C. automatic
cistern.

17.6.4 Providing and fixing one piece construction number 12,782.26


white vitreous china squatting plate with
an integral longitudinal flushing pipe
white PVC automatic flushing cistern, with
fittings standards size GI flush pipe for
back and front flush with standard spreader
pipes with fittings GI clamps and CP brass
coupling complete including painting of
fittings and cutting and making good the
walls and floors etc, wherever required
range of four squatting plates with 10
litre PVC automatic flushing cistern.

17.7.1 Providing and fixing wash basin with CI number 3,966.10


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china
wash basin size 630x450mm with a pair of
15mm CP brass pillar taps.

17.7.2 Providing and fixing wash basin with CI number 3,450.33


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china wash
basin size 630x450mm with a single 15mm CP
brass pillar taps.

17.7.3 Providing and fixing wash basin with CI number 2,784.58


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and

Puducherry Region
17. Sanitary Installation
Page No.: 327
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

brackets, cutting and making good the walls


wherever required White vitreous china
wash basin size 550x400mm with a pair of
15mm brass pillar taps.

17.7.4 Providing and fixing wash basin with CI number 2,268.81


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china flat
back wash basin size 550x400mm with single
15mm CP brass pillar taps.

17.7.5 Providing and fixing wash basin with CI number 3,474.45


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china
angle back wash basin size 600x480mm with
single 15mm CP brass pillar taps.

17.7.6 Providing and fixing wash basin with CI number 2,485.82


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china
angle back wash basin size 400x400mm with
single 15mm CP brass pillar taps.

17.7.7 Providing and fixing wash basin with CI number 2,286.89


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china flat
back wash basin size 450x300 mm with
single 15mm CP brass pillar taps.

17.7.8 Providing and fixing wash basin with CI number 5,533.43


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china
surgeon type wash basin size 660x460 mm
with a pair of 15 mm CP brass pillar
taps.with elbow operated levers.

17.7.9 Providing and fixing wash basin with CI number 3,884.36

Puducherry Region
17. Sanitary Installation
Page No.: 328
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

brackets, 15mm CP brass pillar taps 32 mm


CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required White vitreous china
surgeon type wash basin size 660x460 mm
with single 15mm CP brass pillar taps.with
elbow operated levers.ISI marked.

17.7.10 Providing and fixing wash basin with CI number 3,595.01


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required Stainless steel AISI -
304 (18/8) Round basin 405x355mm with
single 15mm CP brass pillar tap

17.7.11 Providing and fixing wash basin with CI number 3,414.16


brackets, 15mm CP brass pillar taps 32 mm
CP brass waste of standard pattern
including painting of fittings and
brackets, cutting and making good the walls
wherever required Stainless steel AISI -
304 (18/8) wash basin 530x345mm with
single 15mm CP brass pillar tap

17.8 Providing and fixing white vitreous china number 1,424.19


pedestal for wash basin completely recessed
at the back for the reception of pipes and
fittings.

17.9.1 Providing and fixing Kitchen sink with CI number 3,114.67


brackets, CP brass chain with rubber plug
40mm CP brass waste complete, including
paintings the fittings and brackets,
cutting and making good the walls wherever
required. White glazed fire clay kitchen
sink of size 600x450x250 mm.

17.10.1.1 Providing and fixing stainless steel AISI - number 6,988.85


304 (18/8) Kitchen sink as per Is 13983
with CI brackets and stainless steel plug
40mm including painting of fittings and
brackets, cutting and making good the walls
wherever required. Kitchen sink with drain
board - 510x1040 mm bowl depth 250mm.

17.10.1.2 Providing and fixing stainless steel AISI number 6,578.94


304 (18/8) Kitchen sink as per Is 13983
with CI brackets and stainless steel plug
40mm including painting of fittings and

Puducherry Region
17. Sanitary Installation
Page No.: 329
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

brackets, cutting and making good the walls


wherever required - Kitchen sink with drain
board - 510x1040 mm bowl depth 225mm.

17.10.1.3 Providing and fixing stainless steel AISI number 5,915.83


304 (18/8) Kitchen sink as per Is 13983
with CI brackets and stainless steel plug
40mm including painting of fittings and
brackets, cutting and making good the walls
wherever required.Kitchen sink with drain
board - 510x1040 mm bowl depth 200mm.

17.10.1.4 Providing and fixing stainless steel AISI number 3,926.54


304 (18/8) Kitchen sink as per Is 13983
with CI brackets and stainless steel plug
40mm including painting of fittings and
brackets, cutting and making good the walls
wherever required - Kitchen sink with drain
board - 510x1040 mm bowl depth 178mm.

17.10.2.1 Providing and fixing stainless steel AISI number 2,533.58


304 (18/8) Kitchen sink as per Is 13983
with CI brackets and stainless steel plug
40mm including painting of fittings and
brackets, cutting and making good the walls
wherever required - Kitchen sink without
drain board - 610x510 mm bowl depth 200mm.

17.10.2.2 Providing and fixing stainless steel AISI number 2,370.82


304 (18/8) Kitchen sink as per Is 13983
with CI brackets and stainless steel plug
40mm including painting of fittings and
brackets, cutting and making good the walls
wherever required - Kitchen sink without
drain board - 610x460 mm bowl depth 200mm.

17.10.2.3 Providing and fixing stainless steel AISI number 2,238.20


304 (18/8) Kitchen sink as per Is 13983
with CI brackets and stainless steel plug
40mm including painting of fittings and
brackets, cutting and making good the walls
wherever required - Kitchen sink without
drain board - 470x420 mm bowl depth 178mm.

17.11.1 Providing and fixing white vitreous china number 3,056.81


laboratory sink with CI brackets CP brass
chain with rubber plug 40mm CP brass waste
and 40mm CP brass trap with necessary CP
brass unions complete including painting of
fittings and brackets cutting and making
good the walls wherever required size 450 x
300 x150 mm.

Puducherry Region
17. Sanitary Installation
Page No.: 330
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.11.2 Providing and fixing white vitreous china number 3,840.47


laboratory sink with CI brackets CP brass
chain with rubber plug 40mm CP brass waste
and 40mm CP brass trap with necessary CP
brass unions complete including painting of
fittings and brackets cutting and making
good the walls wherever required size
600x450x200mm.

17.12.1 Providing and fixing draining board with CI number 1,142.74


brackets including painting of brackets,
cutting and making good the walls wherever
required white glazed fire clay draining
board of size 600x450x25mm

17.13.1 Providing and fixing white vitreous china number 1,444.86


water closet squatting pan (Indian type)
Long pattern WC pan of size 580mm.

17.13.2 Providing and fixing white vitreous china number 1,637.77


water closet squatting pan (Indian type)
Orissa pattern WC pan of size 580 x 440
mm.

17.14.1 Extra for using coloured WC pan instead of number 572.68


white WC pan Orissa pattern WC pan 580 x
440 mm.

17.15 Providing and fixing white vitreous china number 1,698.05


pedestal type (European type/ wash down
type)water closet pan.

17.16 Extra for using coloured pedestal type wc number 2,917.64


pan (European type) with low level cistern
of same colour instead of white vitreous
china WC pan and cistern.

17.17.1 Providing and fixing a pair of white pair 189.41


vitreous china foot rests of standard
pattern for squatting pan water closet
250 x 130 x 30 mm.

17.17.2 Providing and fixing a pair of white pair 159.27


vitreous china foot rests of standard
pattern for squatting pan water closet 250
x 125 x 25 mm.

17.18.1 Providing and fixing PVC low level flushing cistern 1,224.33
cistern with manually controlled device
(handle lever) conforming to IS 7231 with
all fittings and fixtures complete - 10
litre capacity white.

Puducherry Region
17. Sanitary Installation
Page No.: 331
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.18.2 Providing and fixing PVC low level flushing cistern 1,516.09
cistern with manually controlled device
(handle lever) conforming to IS 7231 with
all fittings and fixtures complete - 10
litre capacity coloured.

17.19.1 Providing and fixing controlled flush, low cistern 7,257.93


level cistern made of vitreous china with
all fittings complete - 10 litre (full
flush) capacity white.

17.19.2 Providing and fixing controlled flush, low cistern 10,042.96


level cistern made of vitreous china with
all fittings complete - 10 litre (full
flush) capacity coloured.

17.20.1 Providing and fixing solid plastic seat number 462.27


with lid for pedestal type WC pan complete
White solid plastic seat with lid.

17.20.2 Providing and fixing solid plastic seat number 450.21


with lid for pedestal type WC pan complete
Black solid plastic seat with lid.

17.21 Extra for providing coloured other than number 162.76


black solid PVC plastic seat and cover in
European type WC pan, instead of white
plastic seat and cover.

17.22 Providing and fixing GI inlet connection number 98.17


for flush pipe connecting with WC pan.

17.23 Providing and fixing white vitreous china number 1,038.78


flat back or wall corner type lipped front
urinal basin of 430x260x350mm and
340x410x265mm sizes respectively.

17.24 Providing and fixing white vitreous china number 2,367.73


squatting plate urinal with integral rim
longitudinal flush pipe.

17.25.1 Providing and fixing white vitreous china number 2,139.03


wash basin including making all connections
but excluding the cost of fittings flat
back wash basin of size 630 x 450 mm.

17.25.2 Providing and fixing white vitreous china number 957.50


wash basin including making all connections
but excluding the cost of fittings flat
back wash basin of size 550 x 400mm.

17.25.3 Providing and fixing white vitreous china number 2,163.14

Puducherry Region
17. Sanitary Installation
Page No.: 332
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

wash basin including making all connections


but excluding the cost of fittings angle
back wash basin of size 600 x 480 mm.

17.25.4 Providing and fixing white vitreous china number 1,174.52


wash basin including making all connections
but excluding the cost of fittings angle
back wash basin of size 400 x 400 mm.

17.25.5 Providing and fixing white vitreous china number 975.59


wash basin including making all connections
but excluding the cost of fittings flat
back wash basin of size 450 x 300 mm.

17.25.6 Providing and fixing white vitreous china number 1,439.76


wash basin including making all connections
but excluding the cost of fittings surgeon
type wash basin of size 660 x 460 mm.

17.26.1 Providing and fixing kitchen sink including number 2,014.32


making all connections excluding cost of
fittings white glazed fire clay sink of
size 600 x 450 x 250 mm.

17.27.1 Providing and fixing white vitreous china number 1,592.34


laboratory sink including making all
connections excluding cost of fittings size
450 x 300 x 150 mm.

17.27.2 Providing and fixing white vitreous china number 2,376.01


laboratory sink including making all
connections excluding cost of fittings size
600 x 450 x 200 mm.

17.28.1.1 Providing and fixing PVC waste pipe for number 62.08
sink or wash basin including PVC waste
fittings complete - Semi rigid pipe - 32mm
dia.

17.28.1.2 Providing and fixing PVC waste pipe for number 69.32
sink or wash basin including PVC waste
fittings complete - Semi rigid pipe - 40mm
dia.

17.28.2.1 Providing and fixing PVC waste pipe for number 69.32
sink or wash basin including PVC waste
fittings complete - Flexible pipe - 32mm
dia.

17.28.2.2 Providing and fixing PVC waste pipe for number 69.32
sink or wash basin including PVC waste
fittings complete - Flexible pipe - 40mm

Puducherry Region
17. Sanitary Installation
Page No.: 333
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

dia.

17.29 Providing and fixing 100mm sand cast iron number 28.07
grating for gully trap.

17.30 Providing and fixing in position 25mm number 56.89


diameter mosquito proof coupling of
approved muncipal design.

17.31 Providing and fixing 600x450mm bevelled number 1,121.35


edge mirror of superior glass (of approved
quality) complete with 6mm thick hard board
ground fixed to wooden cleats with C.P
brass screws and washers complete.

17.32.1 Providing and fixing mirror of superior number 858.10


glass (of approved quality) and of required
shape and size with plastic moulded frame
of approved make and shade with 6mm thick
hard board backing circular shape 450mm
dia.

17.32.2 Providing and fixing mirror of superior number 914.19


glass (of approved quality) and of required
shape and size with plastic moulded frame
of approved make and shade with 6mm thick
hard board backing rectangular shape
453x357mm.

17.32.3 Providing and fixing mirror of superior number 978.24


glass (of approved quality) and of required
shape and size with plastic moulded frame
of approved make and shade with 6mm thick
hard board backing oval shape
450x350mm(outer dimensions).

17.32.4 Providing and fixing mirror of superior number 1,774.68


glass (of approved quality) and of required
shape and size with plastic moulded frame
of approved make and shade with 6mm thick
hard board backing rectangular shape 1500 x
450 mm.

17.33 Providing and fixing 600x120x5mm glass number 391.71


shelf with edges round of supported on
anodised aluminium angle frame with CP
brass brackets and guard rail complete
fixed with 40mm long screws, rawl plugs
etc, complete.

17.34.1 Providing and fixing toilet paper holder CP number 324.20


brass.

Puducherry Region
17. Sanitary Installation
Page No.: 334
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.34.2 Providing and fixing toilet paper holder number 378.45


Vitreous china.

17.35.1.1 Providing and fixing soil, waste and vent metre 393.37
pipes 100mm dia Sand cast iron S&S pipe as
per IS 1729.

17.35.1.2 Providing and fixing soil, waste and vent metre 782.48
pipes 100mm dia centrifugally cast (Spun)
iron socketed pipe as per IS 3989.

17.35.2.1 Providing and fixing soil, waste and vent metre 357.04
pipes 75mm dia sand cast iron S&S pipe as
per IS 1729.

17.35.2.2 Providing and fixing soil, waste and vent metre 675.09
pipes 75mm dia Centrifugally cast (spun)
iron socketed pipe as per IS 3989.

17.36.1 Providing and filling the joints with spun joint 72.84
yarn cement slurry and cement mortar 1:2
(1cement :2 fine sand) in S.C.I / C.I pipes
75mm dia pipe.

17.36.2 Providing and filling the joints with spun joint 85.82
yarn cement slurry and cement mortar 1:2
(1cement :2 fine sand) in S.C.I / C.I pipes
100mm dia pipe.

17.37.1 Providing and fixing M.S holder bat clamps bat clamp 180.17
of approved design to sand cast iron /cast
iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4
(one cement:two coarse sand:four graded
stone aggregate 20mm nominal size)
including cost of cutting holes and making
good the walls etc.
For 100mm dia pipe.

17.37.2 Providing and fixing M.S holder bat clamps bat clamp 163.29
of approved design to sand cast iron /cast
iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4
(one cement:two coarse sand:four graded
stone aggregate 20mm nominal size)
including cost of cutting holes and making
good the walls etc. for 75mm dia pipe.

17.38.1.1 Providing and fixing bend of required number 235.90


degree with access door, insertion rubber
washer 3mm thick bolts and nuts complete

Puducherry Region
17. Sanitary Installation
Page No.: 335
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

100mm sand cast iron S&S as per IS -1729.

17.38.1.2 Providing and fixing bend of required number 326.33


degree with access door, insertion rubber
washer 3mm thick bolts and nuts complete
100mm Sand cast iron S&S as per IS -3989.

17.38.2.1 Providing and fixing bend of required number 206.02


degree with access door, insertion rubber
washer 3mm thick bolts and nuts complete
75mm dia Sand cast iron S&S as per
IS-1729.

17.38.2.2 Providing and fixing bend of required number 265.09


degree with access door, insertion rubber
washer 3mm thick bolts and nuts complete
75mm dia Sand cast iron S&S as per IS-3989.

17.39.1.1 Providing and fixing plain bend of required number 167.18


degree 100mm Sand cast iron S&S as per IS -
1729.

17.39.1.2 Providing and fixing plain bend of required number 257.60


degree 100mm Sand cast iron S&S as per IS -
3989.

17.39.2.1 Providing and fixing plain bend of required number 125.25


degree 75mm Sand cast iron S&S as per IS -
1729.

17.39.2.2 Providing and fixing plain bend of required number 195.18


degree 75mm Sand cast iron S&S as per IS -
3989.

17.40.1.1 Providing and fixing heel rest sanitary number 197.32


bend
100mm dia sand cast iron S&S as per IS -
1729.

17.40.1.2 Providing and fixing heel rest sanitary number 309.44


bend 100mm sand cast iron S&S as per IS -
3989.

17.40.2.1 Providing and fixing heel rest sanitary number 161.41


bend 75mm sand cast iron S&S as per IS
1729.

17.40.2.2 Providing and fixing heel rest sanitary number 268.72


bend 75mm sand cast iron S&S as per IS
3989.

17.41.1.1 Providing and fixing double equal junction junction 416.46

Puducherry Region
17. Sanitary Installation
Page No.: 336
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of required degree with access door,


insertion rubber washer 3mm thick, bolts
and nuts complete 100x100x100x100mm
Sand cast iron S&S as per IS - 1729.

17.41.1.2 Providing and fixing double equal junction junction 660.00


of required degree with access door,
insertion rubber washer 3mm thick, bolts
and nuts complete 100x100x100x100mm
Sand cast iron S&S as per IS - 3989.

17.41.2.1 Providing and fixing double equal junction junction 320.56


of required degree with access door,
insertion rubber washer 3mm thick, bolts
and nuts complete 75x75x75x75mm
Sand cast iron S&S as per IS - 1729.

17.41.2.2 Providing and fixing double equal junction junction 531.54


of required degree with access door,
insertion rubber washer 3mm thick, bolts
and nuts complete 75x75x75x75mm
Sand cast iron S&S as per IS - 3989.

17.42.1.1 Providing and fixing double equal plain junction 354.05


junction of required degree 100x100x100x100
mm sand cast iron S&S as per IS 1729.

17.42.1.2 Providing and fixing double equal plain junction 591.57


junction of required degree 100x100x100x100
mm sand cast iron S&S as per IS 3989.

17.42.2.1 Providing and fixing double equal plain junction 257.86


junction of required degree 75x75x75x75mm
sand cast iron S&S as per IS 1729.

17.42.2.2 Providing and fixing double equal plain junction 472.47


junction of required degree 75x75x75x75mm
sand cast iron S&S as per IS 3989.

17.43.1.1 Providing and fixing single equal plain junction 308.23


junction of required degree with access
door, insertion rubber washer 3mm thick
bolts and nuts complete 100x100x100mm
Sand cast iron S&S as per IS 1729.

17.43.1.2 Providing and fixing single equal plain junction 532.48


junction of required degreewith access door
insertion rubber washer 3mm thick bolts and
nuts complete - 100x100x100 mm sand cast
iron S&S as per IS 3989.

17.43.2.1 Providing and fixing single equal plain junction 248.22

Puducherry Region
17. Sanitary Installation
Page No.: 337
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

junction of required degreewith access


door, insertion rubber washer 3mm thick,
bolts and nuts complete - 75x75x75mm
Sand cast iron S&S as per IS 1729.

17.43.2.2 Providing and fixing single equal plain junction 403.74


junction of required degreewith access
door, insertion rubber washer 3mm thick,
bolts and nuts complete - 75x75x75mm
Sand cast iron S&S as per IS 3989.

17.44.1.1 Providing and fixing single equal plain junction 263.63


junction of required degree 100x100x100 mm
sand cast iron S&S as per IS 1729.

17.44.1.2 Providing and fixing single equal plain junction 471.00


junction of required degree 100x100x100 mm
sand cast iron S&S as per IS 3989.

17.44.2.1 Providing and fixing single equal plain junction 169.85


junction of required degree 75x75x75mm sand
cast iron S&S as per IS 1729.

17.44.2.2 Providing and fixing single equal plain junction 355.52


junction of required degree 75x75x75mm sand
cast iron S&S as per IS 3989.

17.45.1.1 Providing and fixing double unequal junction 356.46


junction of required degree with access
door, insertion rubber washer 3mm thick,
bolts and nuts complete 100x100x 75x75mm
sand cast iron S&S as per IS 1729.

17.45.1.2 Providing and fixing double unequal junction 899.00


junction of required degree with access
door, insertion rubber washer 3mm thick,
bolts and nuts complete 100x100x75x75 mm
sand cast iron S&S as per IS 3989.

17.46.1.1 Providing and fixing double unequal plain junction 241.93


junction of required degree 100x100x
75x75mm sand cast iron S&S as per IS 1729.

17.46.1.2 Providing and fixing double unequal plain junction 798.93


junction of required degree 100x100x
75x75mm Sand cast iron S&S as per IS 3989.

17.47.1.1 Providing and fixing single unequal junction 314.26


junction of required degree with access
door, insertion rubber washer 3mm thick,
bolts and nuts complete 100x100x 75mm
Sand cast iron S&S as per IS 1729.

Puducherry Region
17. Sanitary Installation
Page No.: 338
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.47.1.2 Providing and fixing single unequal junction 685.60


junction of required degree with access
door, insertion rubber washer 3mm thick,
bolts and nuts complete 100x100x 75mm sand
cast iron S&S as per IS 3989.

17.47.7 Providing and fixing GI pipe line, cutting each 777.64


and threading the pipe and making long
screws including excavation, refilling the
earth or cutting of wall and making good
the same complete wherever required
65mm nominal bore.

17.48.1.1 Providing and fixing single unequal plain junction 245.55


junction of required degree 100 x 100 x 75
mm sand cast iron S&S as per IS 1729.

17.48.1.2 Providing and fixing single unequal plain junction 584.33


junction of required degree 100 x 100 x 75
mm sand cast iron S&S as per IS 3989.

17.49.1.1 Providing and fixing double equal plain invert bra 323.91
invert branch of required degree 100 x 100 nch
x 100 x 100 mm Sand cast iron S&S as per IS
1729.

17.49.1.2 Providing and fixing double equal plain invert bra 527.67
invert branch of required degree nch
100x100x100x100mm sand cast iron S&S as per
IS 3989.

17.49.2.1 Providing and fixing double equal plain invert bra 263.89
invert branch of required degree nch
75x75x75x75 mm sand cast iron S&S as per IS
1729.

17.49.2.2 Providing and fixing double equal plain invert bra 425.45
invert branch of required degree nch
75x75x75x75mm sand cast iron S&S as per IS
3989.

17.50.1.1 Providing and fixing single equal plain invert bra 287.74
invert branch of required degree nch
100x100x100 mm sand cast iron S&S as per IS
1729.

17.50.1.2 Providing and fixing single equal plain invert bra 420.36
invert branch of required degree nch
100x100x100 mm sand cast iron S&S as per IS
3989.

17.50.2.1 Providing and fixing single equal plain invert bra 209.63

Puducherry Region
17. Sanitary Installation
Page No.: 339
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

invert branch of required degree 75x75x75 nch


mm sand cast iron S&S as per IS 1729.

17.50.2.2 Providing and fixing single equal plain invert bra 320.56
invert branch of required degree 75x75x75 nch
mm sand cast iron S&S as per IS 3989.

17.51.1.1 Providing and fixing double unequal invert invert bra 354.05
branch of required degree 100x100x75x75 mm nch
sand cast iron S&S as per IS 1729.

17.51.1.2 Providing and fixing double unequal invert invert bra 720.57
branch of required degree 100x100x75x75 mm nch
sand cast iron S&S as per IS 3989.

17.52.1.1 Providing and fixing single unequal plain invert bra 251.57
invert branch of required degree nch
100x100x75mm sand cast iron S&S as per IS
1729.

17.52.1.2 Providing and fixing single unequal plain invert bra 537.31
invert branch of required degree nch
100x100x75mm sand cast iron S&S as per IS
3989.

17.53.1.1 Providing and fixing sand cast iron S&S number 174.67
offsets as per IS 1729 76mm offsets with
75mm dia pipe.

17.53.1.2 Providing and fixing sand cast iron S&S no. 288.00
offsets as per IS 1729 76mm offsets with
100 mm dia pipe.

17.53.2.1 Providing and fixing sand cast iron S&S no. 293.77
offsets as per IS 1729 114mm offsets with
75mm dia pipe.

17.53.2.2 Providing and fixing sand cast iron S&S no. 376.96
offsets as per IS 1729 114 mm offsets with
100mm dia pipe.

17.53.3.1 Providing and fixing sand cast iron S&S no. 369.40
offsets as per IS 1729 152 mm offsets with
75mm dia pipe.

17.53.3.2 Providing and fixing sand cast iron S&S no. 473.09
offsets as per IS 1729 152 mm offsets with
100 mm dia pipe.

17.54.1.1 Providing and fixing sand cast iron S&S no. 238.57
offsets as per IS 3989 75 mm offsets with
75mm dia pipe.

Puducherry Region
17. Sanitary Installation
Page No.: 340
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.54.2.1 Providing and fixing sand cast iron S&S no. 302.87
offsets as per IS 3989 150 mm offsets with
75mm dia pipe.

17.54.2.2 Providing and fixing sand cast iron S&S no. 402.93
offsets as per IS 3989 150 mm offsets with
100 mm dia pipe.

17.55.1.1 Providing and fixing door piece, insertion no. 260.01


rubber washer 3mm thick, bolts and nuts
complete : 100mm sand cast iron S&S as per
IS -1729.

17.55.1.2 Providing and fixing door piece, insertion junction 332.35


rubber washer 3mm thick, bolts and nuts
complete : 100 mm sand cast iron S&S as per
IS - 3989.

17.55.2.1 Providing and fixing door piece, insertion no. 199.99


rubber washer 3mm thick, bolts and nuts
complete : 75 mm sand cast iron S&S as per
IS -1729.

17.55.2.2 Providing and fixing door piece, insertion junction 261.48


rubber washer 3mm thick, bolts and nuts
complete : 75 mm sand cast iron S&S as per
IS - 3989.

17.56.1.1 Providing and fixing terminal guard : 100 no. 173.21


mm sand cast iron S&S as per IS -1729.

17.56.1.2 Providing and fixing terminal guard : 100 no. 214.20


mm sand cast iron S&S as per IS - 3989.

17.56.2.1 Providing and fixing terminal guard : 75 mm no. 131.28


sand cast iron S&S as per IS -1729.

17.56.2.2 Providing and fixing terminal guard : 75 mm no. 193.96


sand cast iron S&S as per IS -3989.

17.57.1.1 Providing and fixing collar 100 mm sand no. 110.52


cast iron S&S as per IS -1729.

17.57.1.2 Providing and fixing collar 100 mm sand no. 222.64


cast iron S&S as per IS -3989.

17.57.2.1 Providing and fixing collar 75 mm sand cast no. 95.10


iron S&S as per IS - 1729.

17.57.2.2 Providing and fixing collar 75 mm sand cast no. 161.41


iron S&S as per IS - 3989.

Puducherry Region
17. Sanitary Installation
Page No.: 341
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.58.1 Providing lead caulked joints to sand cast joint 474.03


iron / centrifugally cast (spun) iron pipes
and fittings of diameter 100 mm.

17.58.2 Providing lead caulked joints to sand cast joint 411.08


iron / centrifugally cast (spun) iron pipes
and fittings of diameter 75 mm.

17.58.3 Providing lead caulked joints to sand cast joint 343.13


iron / centrifugally cast (spun) iron pipes
and fittings of diameter 50 mm.

17.59.1 Providing and fixing MS stays and clamps no. 61.09


for sand cast iron/centrifugally cast
(spun) iron pipes of diameter 100 mm.

17.59.2 Providing and fixing MS stays and clamps no. 55.32


for sand cast iron/centrifugally cast
(spun) iron pipes of diameter 75 mm.

17.59.3 Providing and fixing MS stays and clamps no. 52.59


for sand cast iron/centrifugally cast
(spun) iron pipes of diameter 50 mm.

17.60.1.1 Providing and fixing trap of self cleansing no. 962.90


design with screwed down or hinged grating
with or without vent arm complete,
including cost of cutting and making good
the walls and floors 100 mm inlet and 100mm
outlet sand cast iron S&S as per IS 3989.

17.60.1.2 Providing and fixing trap of self cleansing no. 794.11


design with screwed down or hinged grating
with or without vent arm complete,
including cost of cutting and making good
the walls and floors 100 mm inlet and 100
mm outlet sand cast iron S&S as per IS
1729.

17.60.2.1 Providing and fixing trap of self cleansing no. 999.06


design with screwed down or hinged grating
with or without vent arm complete,
including cost of cutting and making good
the walls and floors 100 mm inlet and 75 mm
outlet sand cast iron S&S as per IS 3989.

17.60.2.2 Providing and fixing trap of self cleansing no. 794.11


design with screwed down or hinged grating
with or without vent arm complete,
including cost of cutting and making good
the walls and floors 100 mm inlet and 75 mm

Puducherry Region
17. Sanitary Installation
Page No.: 342
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

outlet sand cast iron S&S as per IS 1729.

17.61.1 Cutting chases in brick masonry walls for metre 339.34


following diameter sand cast
iron/centrifugally cast (spun) iron pipes
and making good the same with cement
concrete 1:3:6 (one cement ,three coarse
sand six graded stone aggregate 12.5mm
nominal size) including necessary plaster
and pointing in cement mortar 1:4 (one
cement,four coarse sand) 100mm dia.

17.61.2 Cutting chases in brick masonry walls for metre 242.02


following diameter sand cast
iron/centrifugally cast (spun) iron pipes
and making good the same with cement
concrete 1:3:6 (one cement ,three coarse
sand six graded stone aggregate 12.5mm
nominal size) including necessary plaster
and pointing in cement mortar 1:4(one
cement,four coarse sand) 75mm dia.

17.61.3 Cutting chases in brick masonry walls for metre 155.18


following diameter sand cast iron /
centrifugally cast (spun) iron pipes and
making good the same with cement concrete
1:3:6 (one cement ,three coarse sand six
graded stone aggregate 12.5mm nominal size)
including necessary plaster and pointing in
cement mortar 1:4 (one cement,four coarse
sand) 50mm dia.

17.62 Painting CI cistern with bitumastic or any no. 520.99


other anti corrosive paint inside and white
paint over a coat of zinc chromate yellow
primer (of approved quality) on the outside
surface of the cistern flush pipe, other
fittings etc, complete for new work.

17.63 Re-Painting CI cistern with bitumastic or no 353.82


any other anti corrosive paint inside and
white paint on the outside surface of the
cistern flush pipe other fittings etc.
complete including polishing of wooden seat
and lid and cleaning of WC pan with acid
wherever necessary.

17.64 Repainting CI cistern with synthetic enamal no. 148.62


paint of approved colour brand and
manufacture on the outside surface of
cistern flush pipe, other fittings etc,
complete.

Puducherry Region
17. Sanitary Installation
Page No.: 343
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.65.1 Painting sand cast iron / centrifugally metre 43.42


cast (spun) iron soil, waste vent pipes and
fittings with paint of any colour such as
chocolate grey, or buff etc. over a coat of
primer (of approved quality) for new work -
100 mm diameter pipe.

17.65.2 Painting sand cast iron/centrifugally cast metre 33.12


(spun) iron soil, waste vent pipes and
fittings with paint of any colour such as
chocolate grey, or buff etc, over a coat of
primer (of approved quality)for new work -
75 mm diameter pipe.

17.66.1 Repainting sand cast iron/centrifugally metre 20.57


cast iron (spun) iron, soil, waste vent
pipes and fittings with paint of any colour
such as chocolate grey or buff etc.
100mm diameter pipe.

17.66.2 Repainting sand cast iron / centrifugally metre 15.40


cast iron (spun) iron, soil, waste, vent
pipes and fittings with paint of any colour
such as chocolate, grey or buff etc. - 75
mm diameter pipe.

17.67 Repainting bath tub of size 1700x730x430 mm number 446.48


with enamel paint.

17.68.1 Providing and fixing vitreous china dual no 13,188.92


purpose closet suitable for use as
squatting pan or European type water closet
(Anglo Indian WC pan) with seat lid with
C.P brass hinges and rubber buffers, 10
litre low level flushing cistern with
fittings and brackets, 40mm flush bend 20mm
over flow pipe with specials of standard
make and mosquito proof coupling of
approved municipal design complete,
including painting of fitting and brackets,
cutting and making good the walls and
floors wherever required. White vitreous
china dual purpose WC pan with white solid
plastic seat and lid with white vitreous
china flushing cistern and CP flush bend.

17.69.1 Providing and fixing PTMT waste coupling no. 103.07


for wash basin and sink, of approved
quality and colour waste coupling 3.1mm of
79mm length and 62mm breadth weighing not
less than 45 gm.

Puducherry Region
17. Sanitary Installation
Page No.: 344
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

17.69.2 Providing and fixing PTMT waste coupling no. 129.60


for wash basin and sink, of approved
quality and colour waste coupling 38 mm of
83 mm length and 77 mm breadth weighing not
less than 60 gm.

17.70.1 Providing and fixing PTMT bottle trap for no. 433.42
wash basin and sink. Bottle trap 31mm
single piece moulded with height of 270mm,
effective length of tail pipe 260mm from
the centre of the waste coupling 77mm
breadth with 25mm minimum water seal,
weighing not less than 260 gm.

17.70.2 Providing and fixing PTMT bottle trap for no. 464.76
wash basin and sink. Bottle trap 38mm
single piece moulded with height of 270mm,
effective length of tail pipe 260mm from
the centre of the waste coupling 77mm
breadth with 25mm minimum water seal,
weighing not less than 263 gm.

17.71 Providing and fixing PTMT liquid soap no. 192.69


container 109mm wide, 125mm high and 112mm
distance from wall of standard shape with
brackets of the same materials with snap
fittings of approved quality and colours
weighing not less than 105 gms.

17.72 Providing and fixing PTMT towel ring no. 185.05


trapezoidal shape 215mm long, 200mm wide
with a minimum distance of 37mm from wall
face with concealed fittings arrangement of
approved quality and colours weighing not
less than 80 gms.

17.73.1 Providing and fixing PTMT towel rail no. 483.94


complete with brackets fixed to wooden
cleats with CP brass screws with concealed
fittings arrangement of approved quality
and colour 450 mm long towel rail with
total length of 495mm, 78mm wide and
effective height of 88mm, weighing not less
than 170gm.

17.73.2 Providing and fixing PTMT towel rail no. 523.72


complete with brackets fixed to wooden
cleats with CP brass screws with concealed
fittings arrangement of approved quality
and colour 600mm long towel rail with total
length of 645mm, width 78mm and effective
height of 88mm, weighing not less than 190

Puducherry Region
17. Sanitary Installation
Page No.: 345
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

gm.

17.74 Providing and fixing PTMT shelf 440mm long, no. 570.74
124mm width and 36mm height of approved
quality and colour, weighing not less than
300gm.

17.75 Providing and fixing PTMT 15mm urinal no. 173.41


spreader size 95x69x100mm with 1/2" BSP
thread and shapes, weighing not less than
60 gm.

17.76.1 Providing and fixing PTMT urinal cock of no. 162.89


approved quality and colour 15mm nominal
bore, 80mm long 42mm high and 30mm wide
with BSP female threads weighing not less
than 48 gms.

17.77.1 Providing and fixing MS holder bat clamp of no. 187.82


approved design to sand cast iron/cast iron
(spun) pipes comprising of MS flat brackets
made of 50x5mm flat of specified shape,
projecting 75mm outside the wall surface
and fixed on wall with 4 nos, 6mm dia
expansion hold fasteners including drilling
necessary holes in brick wall/CC/RCC
surfaces and the cost of bolts etc. the
pipes shall be fixed to the already fixed
brackets with the help of 30mmx1.6mm
galvanised MS flats of specified shape and
of total length 420mm and shall be fixed
with MS nuts, bolts & washers of size
25x6mm, one bolts on each side of the pipe.
Total bracket length 580mm of approved
shape and design (for single 100mm dia
pipe).

17.77.2 Providing and fixing MS holder bat clamp of no. 229.41


approved design to sand cast iron/cast iron
(spun) pipes comprising of MS flat brackets
made of 50x5mm flat of specified shape,
projecting 75mm outside the wall surface
and fixed on wall with 4 nos, 6mm dia
expansion hold fasteners including drilling
necessary holes in brick wall/CC/RCC
surfaces and the cost of bolts etc. the
pipes shall be fixed to the already fixed
brackets with the help of 30mmx1.6mm
galvanised MS flats of specified shape and
of total length 420mm and shall be fixed
with MS nuts, bolts & washers of size
25x6mm, one bolts on each side of the pipe.

Puducherry Region
17. Sanitary Installation
Page No.: 346
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Total bracket length 810mm of approved


shape and design (for two 100mm dia pipes).

17.77.3 Providing and fixing MS holder bat clamp of no. 270.91


approved design to sand cast iron/cast iron
(spun) pipes comprising of MS flat brackets
made of 50x5mm flat of specified shape,
projecting 75mm outside the wall surface
and fixed on wall with 4 nos, 6mm dia
expansion hold fasteners including drilling
necessary holes in brick wall/CC/RCC
surfaces and the cost of bolts etc. the
pipes shall be fixed to the already fixed
brackets with the help of 30mmx1.6mm
galvanised MS flats of specified shape and
of total length 420mm and shall be fixed
with MS nuts, bolts & washers of size
25x6mm, one bolts on each side of the
pipe. Total bracket length 1040mm of
approved shape and design (for three 100mm
dia pipes).

17.78.1 Providing and fixing CP brass health faucet no 1,165.38


of approved quality - 15mm nominal bore

Puducherry Region
18. Water Supply
Page No.: 347
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.1. Providing and fixing polyethelene Aluminium metre 412.68


polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS-15450 UV stabilled
with carbon black having thermal stability
for hot &cold water supply, capable to
withstand temperature upto 80øC including
all special fittings of composite material
(engineering plastic blend and brass
inserts wherever required) e.g. elbows,
tees, reducers, couplers &connectors etc,
with clampss t 1.00 metre spacing. This
includes testing of joints complete as per
direction of the Engineer in charge
internal work -Exposed on wall 2532 (32mm
OD) pipe.

18.1.1 Providing and fixing Polyethelene metre 219.67


Aluminium Polyethelene (PE-AL-PE) composite
pressure pipes conforming to IS-15450 UV
stabilised with carbon black having thermal
stability for hot & cold water supply,
capable to withstand temperature upto 80øC
including all special fittings of composite
material (engineering plastic blend and
brass inserts wherever required) e.g.
elbows, tees, reducers, couplers
&connectors etc, with clamps at 1.00 metre
spacing. This includes testing of joints
complete internal work - Exposed on wall
1216 (16mm OD) pipe.

18.1.2 Providing and fixing Polyethelene Aluminium metre 262.83


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS-15450 UV stabilised
with carbon black having thermal stability
for hot &cold water supply, capable to
withstand temperature upto 80øC including
all special fittings of composite material
(engineering plastic blend and brass
inserts wherever required) e.g. elbows,
tees, reducers, couplers &connectors etc,
with clamps at 1.00 metre spacing. This
includes testing of joints complete
internal work - Exposed on wall 1620 (20mm
OD) pipe.

18.1.3 Providing and fixing Polyethelene Aluminium metre 323.23


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS-15450 UV stabilised
with carbon black having thermal stability
for hot & cold water supply, capable to
withstand temperature upto 80øC including

Puducherry Region
18. Water Supply
Page No.: 348
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

all special fittings of composite material


(engineering plastic blend and brass
inserts wherever required) e.g. elbows,
tees, reducers, couplers & connectors etc,
with clamps at 1.00 metre spacing. This
includes testing of joints complete
internal work - Exposed on wall 2025 (25mm
OD) pipe.

18.1.4 Providing and fixing Polyethelene Aluminium metre 412.68


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS-15450 UV stabilised
with carbon black having thermal stability
for hot & cold water supply, capable to
withstand temperature upto 80øC including
all special fittings of composite material
(engineering plastic blend and brass
inserts wherever required) e.g. elbows,
tees, reducers, couplers & connectors etc,
with clamps at 1.00 metre spacing. This
includes testing of joints complete
internal work - Exposed on wall 2532 (32 mm
OD) pipe.

18.1.5 Providing and fixing Polyethelene Aluminium metre 539.16


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS-15450 UV stabilised
with carbon black having thermal stability
for hot & cold water supply, capable to
withstand temperature upto 80øC including
all special fittings of composite material
(engineering plastic blend and brass
inserts wherever required) e.g. elbows,
tees, reducers, couplers & connectors etc.
with clamps at 1 metre spacing this
includes testing of joints complete -
Internal work exposed on wall 3240 (40 mm
OD) pipe.

18.1.6 Providing and fixing Polyethelene Aluminium metre 667.69


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS-15450 UV stabilised
with carbon black having thermal stability
for hot & cold water supply, capable to
withstand temperature upto 80øC including
all special fittings of composite material
(engineering plastic blend and brass
inserts wherever required) e.g. elbows,
tees, reducers, couplers &connectors etc
with clamps at 1 metre spacing this
includes testing of joints complete -
Internal work exposed on wall 4050 (50 mm

Puducherry Region
18. Water Supply
Page No.: 349
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

OD) pipe.

18.2.1 Providing and fixing Polyethelene Aluminium metre 379.25


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 1216 (16mm OD)
pipe.

18.2.2 Providing and fixing Polyethelene Aluminium metre 404.77


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 1620 (20mm OD)
pipe.

18.2.3 Providing and fixing Polyethelene Aluminium metre 474.39


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 2025 (25mm OD)
pipe.

Puducherry Region
18. Water Supply
Page No.: 350
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.2.4 Providing and fixing Polyethelene Aluminium metre 577.78


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 2532 (32mm OD)
pipe.

18.3.1 Providing and fixing Polyethelene Aluminium metre 198.26


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 - 2004 UV
stabilised with carbon black having thermal
stability for hot and cold water supply,
capable to withstand temperature upto 80øC
including all special fitting of composite
material (engineering plastic blend and
brass inserts wherever required) eg.
Elbows, tees,reducers,couplers and
connectors etc with trenching,refilling and
testing of joints complete - external work
1216 (16mm OD) pipe.

18.3.2 Providing and fixing Polyethelene Aluminium metre 232.74


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450-2004 UV
stabilised with carbon black having thermal
stability for hot and cold water supply,
capable to withstand temperature upto 80øC
including all special fitting of composite
material (engineering plastic blend and
brass inserts wherever required) eg.
Elbows, tees,reducers,couplers and
connectors etc with trenching,refilling and
testing of joints complete - external work
1620 (20mm OD) pipe.

18.3.3 Providing and fixing Polyethelene Aluminium metre 284.46


Polyethlelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 - 2004 UV
stabiIised with carbon black having thermal
stability for hot and cold water supply,
capable to withstand temperature upto 80øC
including all special fitting of composite

Puducherry Region
18. Water Supply
Page No.: 351
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

material (engineering plastic blend and


brass inserts wherever required) eg.
Elbows, tees,reducers,couplers and
connectors etc with trenching,refilling and
testing of joints complete - external work
2025 (25mm OD) pipe.

18.3.4 Providing and fixing Polyethelene Aluminium metre 361.26


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450-2004 UV
stabilised with carbon black having thermal
stability for hot and cold water supply,
capable to withstand temperature upto 80øC
including all special fitting of composite
material (engineering plastic blend and
brass inserts wherever required) eg.
Elbows, tees,reducers,couplers and
connectors etc with trenching,refilling and
testing of joints complete - external work
2532 (32mm OD) pipe.

18.3.5 Providing and fixing Polyethelene Aluminium metre 468.25


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450-2004 UV
stabilised with carbon black having thermal
stability for hot and cold water supply,
capable to withstand temperature upto 80øC
including all special fitting of composite
material (engineering plastic blend and
brass inserts wherever required) eg.
Elbows, tees,reducers,couplers and
connectors etc with trenching,refilling and
testing of joints complete - external work
3240 (40mm OD) pipe.

18.3.6 Providing and fixing Polyethelene Aluminium metre 596.77


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450-2004 UV
stabilised with carbon black having thermal
stability for hot and cold water supply,
capable to withstand temperature upto 80øC
including all special fitting of composite
material (engineering plastic blend and
brass inserts wherever required) eg.
Elbows, tees,reducers,couplers and
connectors etc with trenching,refilling and
testing of joints complete - external work
4050 (50mm OD) pipe.

18.4.1 Providing and fixing 3 layer PP-R (Poly metre 131.90


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion

Puducherry Region
18. Water Supply
Page No.: 352
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

welded, having thermal stability for hot &


cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes testing of
joints complete.(internal work exposed on
wall) - PN-16 pipe,16 mm OD.

18.4.2 Providing and fixing 3 layer PP-R (Poly metre 165.65


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes testing of
joints complete.(internal work exposed on
wall) - PN-16 pipe, 20 mm OD.

18.4.3 Providing and fixing 3 layer PP-R (Poly metre 216.65


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes testing of
joints complete (internal work exposed on
wall) - PN-16 pipe, 25 mm OD.

18.4.4 Providing and fixing 3 layer PP-R (Poly metre 302.96


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes testing of
joints complete (internal work exposed on
wall) - PN-16 pipe, 32mm OD.

18.4.5 Providing and fixing 3 layer PP-R (Poly metre 446.69


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes testing of
joints complete (internal work exposed on
wall) -PN-16 pipe, 40 mm OD.

Puducherry Region
18. Water Supply
Page No.: 353
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.4.6 Providing and fixing 3 layer PP-R (Poly metre 581.48


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes testing of
joints complete (internal work exposed on
wall) -PN-16 pipe, 50 mm OD.

18.5.1 Providing and fixing 3 layer PP-R (Poly metre 240.20


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints
complete(Concealed work including cutting
chases and making good the walls etc.,) -
PN-16 pipe, 16 mm OD.

18.5.2 Providing and fixing 3 layer PP-R (Poly metre 273.96


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints complete
(Concealed work including cutting chases
and making good the walls etc.,) - PN-16
pipe, 20 mm OD.

18.5.3 Providing and fixing 3 layer PP-R (Poly metre 330.92


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints complete
(Concealed work including cutting chases
and making good the walls etc.,) - PN-16
pipe, 25 mm OD.

Puducherry Region
18. Water Supply
Page No.: 354
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.5.4 Providing and fixing 3 layer PP-R (Poly metre 430.09


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded polypropylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints complete
(Concealed work including cutting chases
and making good the walls etc.,) - PN-16
pipe, 32 mm OD.

18.6.1 Providing and fixing 3 layer PP-R (Poly metre 110.48


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded polypropylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe, 16mm OD.

18.6.2 Providing and fixing 3 layer PP-R (Poly metre 135.56


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe, 20mm OD.

18.6.3 Providing and fixing 3 layer PP-R (Poly metre 183.76


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe, 25mm OD.

18.6.4 Providing and fixing 3 layer PP-R (Poly metre 257.43


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16

Puducherry Region
18. Water Supply
Page No.: 355
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pipe,32mm OD.

18.6.5 Providing and fixing 3 layer PP-R (Poly metre 375.77


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe,40mm OD.

18.6.6 Providing and fixing 3 layer PP-R (Poly metre 510.56


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe,50mm OD.

18.6.7 Providing and fixing 3 layer PP-R (Poly metre 779.49


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe,63mm OD.

18.6.8 Providing and fixing 3 layer PP-R (Poly metre 1,077.28


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe,75mm OD.

18.6.9 Providing and fixing 3 layer PP-R (Poly metre 1,699.39


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-16
pipe,90mm OD.

Puducherry Region
18. Water Supply
Page No.: 356
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.6.10 Providing and fixing 3 layer PP-R (Poly metre 1,777.76


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-10
pipe,110 mm OD (SDR - 11)

18.6.11 Providing and fixing 3 layer PP-R (Poly metre 3,682.30


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c trenching refilling & testing
of joints complete (External work) - PN-10
pipe,160 mm OD (SDR - 11)

18.7.1 Providing and fixing chlorinated polyvinyl metre 186.03


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and testing of joints complete
(Internal work exposed on wall) -15mm
nominal outer dia pipes.

18.7.2 Providing and fixing chlorinated polyvinyl metre 213.52


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and testing of joints complete
(Internal work exposed on wall) - 20mm
nominal outer dia pipes

18.7.3 Providing and fixing chlorinated polyvinyl metre 251.13


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and testing of joints complete.
(Internal work exposed on wall) - 25mm
nominal outer dia pipes

Puducherry Region
18. Water Supply
Page No.: 357
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.7.4 Providing and fixing chlorinated polyvinyl metre 342.15


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and testing of joints complete.
(Internal work exposed on wall) - 32mm
nominal outer dia pipes

18.7.5 Providing and fixing chlorinated polyvinyl metre 457.66


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and testing of joints complete.
(Internal work exposed on wall) - 40mm
nominal outer dia pipes

18.7.6 Providing and fixing chlorinated polyvinyl metre 655.15


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and testing of joints complete
(Internal work exposed on wall) - 50mm
nominal outer dia pipes

18.8.1 Providing and fixing chlorinated polyvinyl metre 301.39


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 15mm nominal outer dia pipes.

18.8.2 Providing and fixing chlorinated polyvinyl metre 326.70


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of

Puducherry Region
18. Water Supply
Page No.: 358
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pipes & fitting with one step CPVC solvent


cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 20mm nominal outer dia pipes.

18.8.3 Providing and fixing chlorinated polyvinyl metre 377.34


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 25mm nominal outer dia pipes.

18.8.4 Providing and fixing chlorinated polyvinyl metre 482.83


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 32mm nominal outer dia pipes.

18.9.1 Providing and fixing chlorinated polyvinyl metre 155.94


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 15mm nominal
outer dia pipes.

18.9.2 Providing and fixing chlorinated polyvinyl metre 174.74


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 20mm nominal
outer dia pipes.

Puducherry Region
18. Water Supply
Page No.: 359
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.9.3 Providing and fixing chlorinated polyvinyl metre 218.25


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 25mm nominal
outer dia pipes.

18.9.4 Providing and fixing chlorinated polyvinyl metre 296.61


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 32mm nominal
outer dia pipes.

18.9.5 Providing and fixing chlorinated polyvinyl metre 386.74


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 40mm nominal
outer dia pipes.

18.9.6 Providing and fixing chlorinated polyvinyl metre 584.23


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings, this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 50mm nominal
outer dia pipes.

18.9.7 Providing and fixing chlorinated polyvinyl metre 1,437.77


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings, this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 62.50mm nominal
inner dia pipes.

18.9.8 Providing and fixing chlorinated polyvinyl metre 1,860.95


chloride (CPVC) pipes having thermal

Puducherry Region
18. Water Supply
Page No.: 360
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

stability for hot & cold water supply


including all CPVC plain & brass threaded
fittings, this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 75mm nominal
inner dia pipes.

18.9.9 Providing and fixing chlorinated polyvinyl metre 2,580.23


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings, this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 100 mm nominal
inner dia pipes.

18.9.10 Providing and fixing chlorinated polyvinyl metre 4,478.56


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings, this included jointing of pipes &
fittings with one step CPVC solvent cement,
trenching refilling & testing of joints
complete (External work) - 150mm nominal
inner dia pipes.

18.9.11 Providing and fixing ASTM pipes including metre 141.42


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and testing of joints complete (Internal
work exposed on wall) - 20mm nominal outer
dia pipes

18.9.12 Providing and fixing ASTM pipes including metre 161.79


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and testing of joints complete (Internal
work exposed on wall) - 25mm nominal outer
dia pipes

18.9.13 Providing and fixing ASTM pipes including metre 194.82


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and testing of joints complete (Internal

Puducherry Region
18. Water Supply
Page No.: 361
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

work exposed on wall) - 32mm nominal outer


dia pipes

18.9.14 Providing and fixing ASTM pipes including metre 253.91


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and testing of joints complete (Internal
work exposed on wall) - 40mm nominal outer
dia pipes

18.9.15 Providing and fixing ASTM pipes including metre 332.28


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and testing of joints complete (Internal
work exposed on wall) - 50mm nominal outer
dia pipes

18.9.16 Providing and fixing ASTM pipes including metre 330.71


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and testing of joints complete (Internal
work exposed on wall) - 63mm nominal outer
dia pipes

18.9.21 Providing and fixing ASTM pipes including metre 215.00


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and the cost of cutting chases and making
good the same including testing of joints
complete (Concealed work including cutting
chases and making good the walls etc.) -
20mm nominal outer dia pipes

18.9.22 Providing and fixing ASTM pipes including metre 235.38


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and the cost of cutting chases and making
good the same including testing of joints
complete (Concealed work including cutting
chases and making good the walls etc.) -
25mm nominal outer dia pipes

Puducherry Region
18. Water Supply
Page No.: 362
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.9.23 Providing and fixing ASTM pipes including metre 255.75


all ASTM plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00m
spacing. This includes jointing of pipes &
fitting with one step ASTM solvent cement
and the cost of cutting chases and making
good the same including testing of joints
complete (Concealed work including cutting
chases and making good the walls etc.) -
32mm nominal outer dia pipes

18.9.31 Providing and fixing ASTM pipes including metre 102.65


all ASTM plain & brass threaded fittings
this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 20mm nominal
outer dia pipes

18.9.32 Providing and fixing ASTM pipes including metre 128.91


all ASTM plain & brass threaded fittings
this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 25mm nominal
outer dia pipes

18.9.33 Providing and fixing ASTM pipes including metre 149.28


all ASTM plain & brass threaded fittings
this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 32mm nominal
outer dia pipes

18.9.34 Providing and fixing ASTM pipes including metre 182.99


all ASTM plain & brass threaded fittings
this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 40mm nominal
outer dia pipes

18.9.35 Providing and fixing ASTM pipes including metre 261.36


all ASTM plain & brass threaded fittings
this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 50mm nominal
outer dia pipes

18.9.36 Providing and fixing ASTM pipes including metre 277.95

Puducherry Region
18. Water Supply
Page No.: 363
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

all ASTM plain & brass threaded fittings


this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 63mm nominal
outer dia pipes

18.9.37 Providing and fixing ASTM pipes including metre 371.99


all ASTM plain & brass threaded fittings
this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 75mm nominal
outer dia pipes

18.9.38 Providing and fixing ASTM pipes including metre 481.58


all ASTM plain & brass threaded fittings
this included jointing of pipes & fittings
with one step ASTM solvent cement,
trenching refilling & testing of joints
Complete (External work) - 100mm nominal
outer dia pipes

18.10.1 Providing and fixing GI pipes complete with metre 274.78


GI fittings and clamps including cutting
and making good the walls etc.Intermnal
work - exposed on wall 15mm dia nominal
bore.

18.10.2 Providing and fixing GI pipes complete with metre 341.69


GI fittings and clamps including cutting
and making good the walls etc.Intermnal
work - exposed on wall 20 mm dia nominal
bore.

18.10.3 Providing and fixing GI pipes complete with metre 432.77


GI fittings and clamps including cutting
and making good the walls etc.Intermnal
work - exposed on wall 25 mm dia nominal
bore.

18.10.4 Providing and fixing GI pipes complete with metre 468.69


GI fittings and clamps including cutting
and making good the walls etc.Intermnal
work - exposed on wall 32 mm dia nominal
bore.

18.10.5 Providing and fixing GI pipes complete with metre 550.34


GI fittings and clamps including cutting
and making good the walls etc.Intermnal
work - exposed on wall 40 mm dia nominal
bore.

Puducherry Region
18. Water Supply
Page No.: 364
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.10.6 Providing and fixing GI pipes complete with metre 834.70


GI fittings and clamps including cutting
and making good the walls etc.Intermnal
work - exposed on wall 50 mm dia nominal
bore.

18.11.1 Concealed pipe including painting with metre 372.13


anticorrossive bitumastic paint, cutting
chases and making good the wall 15 mm dia
nominal bore.

18.11.2 Concealed pipe including painting with metre 431.57


anticorrossive bitumastic paint, cutting
chases and making good the wall 20 mm dia
nominal bore.

18.12.1 Providing and fixing GI pipes complete with metre 231.16


GI fittings including trenching and
refilling etc. (external work) - 15 mm dia
nominal bore.

18.12.2 Providing and fixing GI pipes complete with metre 282.81


GI fittings including trenching and
refilling etc. (external work) - 20 mm dia
nominal bore.

18.12.3 Providing and fixing GI pipes complete with metre 361.55


GI fittings including trenching and
refilling etc. (external work) - 25 mm dia
nominal bore.

18.12.4 Providing and fixing GI pipes complete with metre 382.46


GI fittings including trenching and
refilling etc. (external work) - 32 mm dia
nominal bore.

18.12.5 Providing and fixing GI pipes complete with metre 432.80


GI fittings including trenching and
refilling etc. (external work) - 40 mm dia
nominal bore.

18.12.6 Providing and fixing GI pipes complete with metre 657.85


GI fittings including trenching and
refilling etc. (external work) - 50 mm dia
nominal bore.

18.12.7 Providing and fixing GI pipes complete with metre 990.44


GI fittings including trenching and
refilling etc. (external work) - 65 mm dia
nominal bore.

18.12.8 Providing and fixing GI pipes complete with metre 1,420.85

Puducherry Region
18. Water Supply
Page No.: 365
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

GI fittings including trenching and


refilling etc. (external work) - 80 mm dia
nominal bore.

18.13.1 Making connection of GI distribution branch each 433.95


with GI main of following sizes by
providing and fixing tee, including cutting
and threading the pipe etc, complete -
25 to 40 mm nominal bore.

18.13.2 Making connection of GI distribution branch each 775.61


with GI main of following sizes by
providing and fixing tee, including cutting
and threading the pipe etc, complete -
50 to 80 mm nominal bore.

18.14 Fixing water meter and stop cock in GI pipe meter with 367.64
line including cutting and threading the stop cock
pipe and making long screws etc. complete
(cost of water meter and stop cock to be
paid separately).

18.15.1 Providing and fixing brass bib cock of each 318.42


approved quality - 15 mm nominal bore.

18.15.2 Providing and fixing brass bib cock of each 381.72


approved quality - 20 mm nominal bore.

18.16.1 Providing and fixing brass stop cock of each 354.59


approved quality - 15 mm nominal bore.

18.16.2 Providing and fixing brass stop cock of each 432.68


approved quality - 20 mm nominal bore.

18.17.1 Providing and fixing gun metal gate valve each 408.57
with CI wheel of approved quality (screwed
end) - 25 mm nominal bore.

18.17.2 Providing and fixing gun metal gate valve each 592.44
with CI wheel of approved quality (screwed
end) - 32 mm nominal bore.

18.17.3 Providing and fixing gun metal gate valve each 824.26
with CI wheel of approved quality (screwed
end) - 40 mm nominal bore.

18.17.4 Providing and fixing gun metal gate valve each 1,116.35
with CI wheel of approved quality (screwed
end) - 50 mm nominal bore.

18.17.5 Providing and fixing gun metal gate valve each 1,541.06
with CI wheel of approved quality (screwed

Puducherry Region
18. Water Supply
Page No.: 366
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

end) - 65 mm nominal bore.

18.17.6 Providing and fixing gun metal gate valve each 2,390.76
with CI wheel of approved quality (screwed
end) - 80 mm nominal bore.

18.18.1.1 Providing and fixing ball valve (brass) of each 262.55


approved quality complete. high or low
pressure with plastic floats - 15 mm
nominal bore.

18.18.1.2 Providing and fixing ball valve (brass) of each 442.57


approved quality complete. high or low
pressure with plastic floats - 20 mm
nominal bore.

18.18.1.3 Providing and fixing ball valve (brass) of each 477.94


approved quality complete. high or low
pressure with plastic floats - 25 mm
nominal bore.

18.19.1.1 Providing and fixing gun metal non return each 474.62
valve of approved quality (screwed end) 25
mm nominal bore - Horizontal.

18.19.1.2 Providing and fixing gun metal non return each 299.80
valve of approved quality (screwed end) 25
mm nominal bore - Vertical.

18.19.2.1 Providing and fixing gun metal non return each 646.16
valve of approved quality (screwed end) 32
mm nominal bore horizontal.

18.19.2.2 Providing and fixing gun metal non return each 423.11
valve of approved quality (screwed end) 32
mm nominal bore vertical.

18.19.3.1 Providing and fixing gun metal non return each 914.13
valve of approved quality (screwed end) 40
mm nominal bore Horizontal.

18.19.3.2 Providing and fixing gun metal non return each 486.13
valve of approved quality (screwed end) 40
mm nominal bore Vertical.

18.19.4.1 Providing and fixing gun metal non return each 1,327.06
valve of approved quality (screwed end) 50
mm nominal bore Horizontal.

18.19.4.2 Providing and fixing gun metal non return each 790.55
valve of approved quality (screwed end) 50
mm nominal bore Vertical.

Puducherry Region
18. Water Supply
Page No.: 367
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.19.5.1 Providing and fixing gun metal non return each 1,992.91
valve of approved quality (screwed end) 65
mm nominal bore Horizontal.

18.19.5.2 Providing and fixing gun metal non return each 1,034.43
valve of approved quality (screwed end) 65
mm nominal bore Vertical.

18.19.6.1 Providing and fixing gun metal non return each 3,093.05
valve of approved quality (screwed end) 80
mm nominal bore Horizontal.

18.19.6.2 Providing and fixing gun metal non return each 1,519.70
valve of approved quality (screwed end) 80
mm nominal bore Vertical.

18.20.1 Providing and fixing brass ferrule with CI each 290.00


mouth cover including boring and tapping
the main 15 mm nominal bore.

18.20.2 Providing and fixing brass ferrule with CI each 400.98


mouth cover including boring and tapping
the main 20 mm nominal bore.

18.20.3 Providing and fixing brass ferrule with CI each 414.96


mouth cover including boring and tapping
the main 25 mm nominal bore.

18.21.1.1 Providing and fixing uplasticised PVC each 116.20


connection pipe with brass unions 30 cm
length 15mm nominal bore.

18.21.1.2 Providing and fixing uplasticised PVC one 134.30


connection pipe with brass unions 30 cm
length 20 mm nominal bore.

18.21.2.1 Providing and fixing uplasticised PVC each 143.07


connection pipe with brass unions 45 cm
length 15 mm nominal bore.

18.21.2.2 Providing and fixing uplasticised PVC each 155.12


connection pipe with brass unions 45 cm
length 20 mm nominal bore.

18.22.1 Providing and fixing CP brass shower rose each 858.21


with 15 or 20 mm inlet 100 mm diameter.

18.22.2 Providing and fixing CP brass shower rose each 1,282.93


with 15 or 20 mm inlet 150 mm diameter.

18.23 Laying in position centrifugally cast quintal 144.33

Puducherry Region
18. Water Supply
Page No.: 368
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

(spun) iron S&S or flanged pipes (excluding


cost of pipe).

18.24 Laying in position S&S or flanged C.I. quintal 276.94


specials such tees, bends collars, tapers
and caps etc, (excluding cost of specials).

18.25.1 Providing and laying S&S CI standard quintal 6,244.85


specials such as tees, bends, collars,
tapers, caps etc (heavy class) upto 300 mm
dia.

18.25.2 Providing and laying S&S CI standard quintal 6,546.25


specials such as tees, bends, collars,
tapers, caps etc (heavy class) over 300 mm
dia.

18.26.1 Providing and laying flanged CI standard quintal 6,787.38


specials such a tees, bends, collars,
tapers, caps, etc,suitable for flanged
jointing as per IS 1538 upto 300 mm dia.

18.26.2 Providing and laying flanged CI standard quintal 6,907.94


specials such a tees, bends, collars,
tapers, caps etc,suitable for flanged
jointing as per IS 1538 over 300 mm dia.

18.27.1 Providing and laying S&S cetrifugally cast metre 968.97


(spun) iron pipes (class LA) conforming to
IS 1536 - 100 mm dia pipe.

18.27.2 Providing and laying S&S cetrifugally cast metre 1,146.42


(spun) iron pipes (class LA) conforming to
IS 1536 - 125 mm dia pipe.

18.27.3 Providing and laying S&S cetrifugally cast metre 1,457.07


(spun) iron pipes (class LA) conforming to
IS 1536 - 150 mm dia pipe.

18.27.4 Providing and laying S&S cetrifugally cast metre 1,936.72


(spun) iron pipes (class LA) conforming to
IS 1536 - 200 mm dia pipe.

18.27.5 Providing and laying S&S cetrifugally cast metre 2,665.68


(spun) iron pipes (class LA) conforming to
IS 1536 - 250 mm dia pipe.

18.27.6 Providing and laying S&S cetrifugally cast metre 6,610.42


(spun) iron pipes (class LA) conforming to
IS 1536 - 300 mm dia pipe.

18.27.7 Providing and laying S&S cetrifugally cast mrtre 8,331.46

Puducherry Region
18. Water Supply
Page No.: 369
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

(spun) iron pipes (class LA) conforming to


IS 1536 - 350 mm dia pipe.

18.27.8 Providing and laying S&S cetrifugally cast metre 10,139.69


(spun) iron pipes (class LA) conforming to
IS 1536 - 400 mm dia pipe.

18.27.9 Providing and laying S&S cetrifugally cast metre 12,225.31


(spun) iron pipes (class LA) conforming to
IS 1536 - 450 mm dia pipe.

18.27.10 Providing and laying S&S cetrifugally cast metre 14,390.49


(spun) iron pipes (class LA) conforming to
IS 1536 - 500 mm dia pipe.

18.27.11 Providing and laying S&S cetrifugally cast metre 18,634.95


(spun) iron pipes (class LA) conforming to
IS 1536 - 600 mm dia pipe.

18.28.1 Providing lead caulked joints spun iron or joint 211.32


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 100 mm diameter pipe.

18.28.2 Providing lead caulked joints spun iron or joint 339.43


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 125 mm diameter pipe.

18.28.3 Providing lead caulked joints spun iron or joint 316.42


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 150 mm diameter pipe.

18.28.4 Providing lead caulked joints spun iron or joint 420.61


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 200 mm diameter pipe.

18.28.5 Providing lead caulked joints spun iron or joint 526.23


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 250 mm diameter pipe

18.28.6 Providing lead caulked joints spun iron or joint 633.90


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 300 mm diameter pipe.

18.28.7 Providing lead caulked joints spun iron or joint 644.74


C.I. pipes and specials including testing
of joints but excluding the cost of pig

Puducherry Region
18. Water Supply
Page No.: 370
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

lead. 350 mm diameter pipe.

18.28.8 Providing lead caulked joints spun iron or joint 848.82


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 400 mm diameter pipe.

18.28.9 Providing lead caulked joints spun iron or joint 952.50


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 450 mm diameter pipe.

18.28.10 Providing lead caulked joints spun iron or joint 1,007.03


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 500 mm diameter pipe.

18.28.11 Providing lead caulked joints spun iron or joint 1,365.38


C.I. pipes and specials including testing
of joints but excluding the cost of pig
lead. 600 mm diameter pipe.

18.29 Supplying pig lead at site of work. quintal 33,155.02

18.30.1 Providing flanged joints to double flanged joint 286.76


C.I/D.I.Pipes and specials including
testing of joints : 80 mm diameter pipe.

18.30.2 Providing flanged joints to double flanged joint 518.12


C.I/D.I.Pipes and specials including
testing of joints : 100 mm diameter pipe.

18.30.3 Providing flanged joints to double flanged joint 548.26


C.I/D.I.Pipes and specials including
testing of joints : 125 mm diameter pipe.

18.30.4 Providing flanged joints to double flanged joint 878.55


C.I/D.I.Pipes and specials including
testing of joints : 150 mm diameter pipe.

18.30.5 Providing flanged joints to double flanged joint 930.39


C.I/D.I.Pipes and specials including
testing of joints : 200 mm diameter pipe.

18.30.6 Providing flanged joints to double flanged joint 1,422.17


C.I/D.I.Pipes and specials including
testing of joints : 250 mm diameter pipe.

18.30.7 Providing flanged joints to double flanged joint 1,461.96


C.I/D.I.Pipes and specials including
testing of joints : 300 mm diameter pipe.

Puducherry Region
18. Water Supply
Page No.: 371
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.30.8 Providing flanged joints to double flanged joint 1,947.71


C.I/D.I.Pipes and specials including
testing of joints : 350 mm diameter pipe.

18.30.9 Providing flanged joints to double flanged joint 2,055.01


C.I/D.I.Pipes and specials including
testing of joints : 400 mm diameter pipe.

18.30.10 Providing flanged joints to double flanged joint 2,552.33


C.I/D.I.Pipes and specials including
testing of joints : 450 mm diameter pipe.

18.30.11 Providing flanged joints to double flanged joint 3,953.71


C.I/D.I.Pipes and specials including
testing of joints : 500 mm diameter pipe.

18.30.12 Providing flanged joints to double flanged joint 4,105.50


C.I/D.I.Pipes and specials including
testing of joints : 600 mm diameter pipe.

18.31.1.1 Providing and fixing CI sluice valves (with valve 5,016.97


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 100mm diameter
class I.

18.31.1.2 Providing and fixing CI sluice valves (with valve 4,775.84


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 100mm diameter
class II.

18.31.2.1 Providing and fixing CI sluice valves (with valve 5,894.14


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 125mm diameter
Class I.

18.31.2.2 Providing and fixing CI sluice valves (with valve 5,625.97


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 125mm diameter
Class-II.

18.31.3.1 Providing and fixing CI sluice valves (with valve 7,527.92


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 150mm diameter
Class I.

18.31.3.2 Providing and fixing CI sluice valves (with valve 7,180.88


cap) complete with bolts, nuts, rubber

Puducherry Region
18. Water Supply
Page No.: 372
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

insertion etc (the tail pieces if required


will be paid separately) 150mm diameter
Class II.

18.31.4.1 Providing and fixing CI sluice valves (with valve 10,154.46


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 200mm diameter
Class I.

18.31.4.2 Providing and fixing CI sluice valves (with valve 9,631.95


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 200mm diameter
Class II.

18.31.5.1 Providing and fixing CI sluice valves (with valve 14,350.01


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 250mm diameter
Class I.

18.31.5.2 Providing and fixing CI sluice valves (with valve 13,608.36


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 250mm diameter
Class II.

18.31.6.1 Providing and fixing CI sluice valves (with valve 17,122.45


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 300mm diameter
Class I.

18.31.6.2 Providing and fixing CI sluice valves (with valve 16,182.19


cap) complete with bolts, nuts, rubber
insertion etc (the tail pieces if required
will be paid separately) 300mm diameter
Class II.

18.32.1 Constructing masonry chamber 30x30x50cm, chamber 1,143.71


inside with 75 class designation brick work
in cement mortar 1:4 (1cement 4 coarse
sand) for stop cock, with CI surface box
100x100x75mm (inside) with hinged cover
fixed in cement concrete slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) necessary
excavation foundation concrete 1:5:10 (one
cement 5 fine sand 10 graded stone
aggregate 40mm nominal size)and inside
plastering with cement mortor 1:3 (1cement

Puducherry Region
18. Water Supply
Page No.: 373
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

3 coarse sand) 12mmthick finished with a


floating coat of neat cement complete as
per standard design with F P S bricks.

18.33.1 Constructing masonry chamber 60x60x75 cm, chamber 6,914.99


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement, 4 coarse
sand) for sluice valve, with CI surface box
100 mm. top diameter, 160 mm bottom
diameter and 180 mm deep (inside) with
chained lid and RCC top slab 1:2:4 mix (1
cement, 2 coarse sand, 4 graded stone
aggregate 20 mm nominal size) necessary
excavation foundation concrete 1:5:10 (1
cerment,5 fine sand,10 graded stone
aggregate 40 mm nominal size) and inside
plastering with cement mortor 1:3 (1
cement,3 coarse sand)12 mm thick finished
with a floating coat of neat cement
complete as per standard design with F.P.S
bricks.

18.34.1 Constructing masonry chamber 90x90x100 cm, chamber 11,995.24


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement, 4 coarse
sand) for sluice valve, with CI surface box
100 mm top diameter, 160 mm bottom diameter
and 180 mm deep (inside) with chained lid
and RCC top slab 1:2:4 mix (1 cement 2
coarse sand,4 graded aggregate 20 mm
nominal size) necessary excavation
foudation conrete 1:5:10 (1 cement, 5 fine
sand,10 graded stone aggregate) 40 mm
nominal size) and inside plastering with
cement mortor 1:3 (1 cement,3 coarse sand)
12 mm thick finished with a floating coat
of neat cement completre as per standard
design with F.P.S bricks.

18.35.1 Constructing masonry chamber 120x120x100 cm chamber 16,624.23


, inside with 75 class designation brick
work in cement mortor 1:4 (1 cement,4
coarse sand) for sluice valve, with CI
surface box 100 mm top diameter, 160 mm
bottom diameter and 180 mm deep (inside)
with chained lid and RCC top slab 1:2:4 mix
(1 cement 2 coarse sand,4 graded aggregate
20 mm nominal size) necessary excavation
foudation conrete 1:5:10 (1 cement, 5 fine
sand,10 graded stone aggregate) 40 mm
nominal size) and inside plastering with
cement mortor 1:3 (1 cement,3 coarse sand)

Puducherry Region
18. Water Supply
Page No.: 374
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12 mm thick finished with a floating coat


of neat cement completre as per standard
design with F.P.S bricks.

18.36.1 Constructing masonry chamber 60x60x75 cm , chamber 6,471.94


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement,4 coarse
sand) for fire hydrants, with CI surface
box 350x350 mm top and 165mm deep (inside)
with chained lid and RCC top slab 1:2:4 mix
(1 cement 2 coarse sand,4 graded aggregate
20 mm nominal size) necessary excavation
foudation conrete 1:5:10 (1 cement, 5 fine
sand,10 graded stone aggregate) 40 mm
nominal size) and inside plastering with
cement mortor 1:3 (1 cement,3 coarse sand)
12 mm thick finished with a floating coat
of neat cement complete as per standard
design with F.P.S bricks.

18.37.1 Constructing masonry chamber 60x45x50 cm , chamber 6,311.27


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement : 4 coarse
sand) for water meter complete with CI
double flap surface box 400x200x200 mm
(inside) with locking arrangement and RCC
top slab 1:2:4 mix (1 cement 2 coarse
sand,4 graded aggregate 20 mm nominal
size) necessary excavation foudation
conrete 1:5:10 (1 cement, 5 fine sand,10
graded stone aggregate) 40 mm nominal size)
and inside plastering with cement mortor
1:3 (1 cement,3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design with
F.P.S bricks.

18.38.1 Painting GI pipes and fittings with metre 10.60


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work 15mm diameter pipe.

18.38.2 Painting GI pipes and fittings with metre 12.57


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work 20mm diameter pipe

18.38.3 Painting GI pipes and fittings with metre 16.48


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work 25mm diameter pipe.

Puducherry Region
18. Water Supply
Page No.: 375
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.38.4 Painting GI pipes and fittings with metre 19.62


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work 32 mm diameter pipe.

18.38.5 Painting GI pipes and fittings with metre 23.16


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work 40mm diameter pipe.

18.38.6 Painting GI pipes and fittings with metre 27.46


synthetic enamal white paint over a ready
mixed priming coat both of approved quality
for new work 50mm diameter pipe.

18.39.1 Repainting GI pipes and fittings with metre 5.20


synthetic enamel white paint of approved
quality 15mm diameter pipe.

18.39.2 Repainting GI pipes and fittings with metre 6.10


synthetic enamel white paint of approved
quality 20 mm diameter pipe.

18.39.3 Repainting GI pipes and fittings with metre 7.79


synthetic enamel white paint of approved
quality 25 mm diameter pipe.

18.39.4 Repainting GI pipes and fittings with metre 9.24


synthetic enamel white paint of approved
quality 32 mm diameter pipe.

18.39.5 Repainting GI pipes and fittings with metre 10.75


synthetic enamel white paint of approved
quality 40 mm diameter pipe.

18.39.6 Repainting GI pipes and fittings with metre 12.70


synthetic enamel white paint of approved
quality 50 mm diameter pipe.

18.40.1 Painting GI pipes and fittings with two metre 6.41


coats of anti corrosive bitumastic paint of
approved quality 15 mm diameter pipe.

18.40.2 Painting GI pipes and fittings with two metre 7.61


coats of anti corrosive bitumastic paint of
approved quality 20 mm diameter pipe.

18.40.3 Painting GI pipes and fittings with two metre 9.70


coats of anti corrosive bitumastic paint of
approved quality 25 mm diameter pipe.

18.40.4 Painting GI pipes and fittings with two metre 11.61

Puducherry Region
18. Water Supply
Page No.: 376
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

coats of anti corrosive bitumastic paint of


approved quality 32 mm diameter pipe.

18.40.5 Painting GI pipes and fittings with two metre 13.22


coats of anti corrosive bitumastic paint of
approved quality 40 mm diameter pipe.

18.40.6 Painting GI pipes and fittings with two metre 15.83


coats of anti corrosive bitumastic paint of
approved quality 50 mm diameter pipe.

18.40.7 Painting GI pipes and fittings with two metre 19.56


coats of anti corrosive bitumastic paint of
approved quality 65 mm diameter pipe.

18.40.8 Painting GI pipes and fittings with two metre 22.69


coats of anti corrosive bitumastic paint of
approved quality 80 mm diameter pipe.

18.41 Filling sand grading zone V or coarser cum 1,593.61


grade.

18.41.1 Providing and filling sand grading zone V metre 117.93


or coarser grade alround the GI pipes in
external work 15 mm diameter pipe.

18.41.2 Providing and filling sand grading zone V metre 119.52


or coarser grade alround the GI pipes in
external work 20 mm diameter pipe.

18.41.3 Providing and filling sand grading zone V metre 122.71


or coarser grade alround the GI pipes in
external work 25 mm diameter pipe.

18.41.4 Providing and filling sand grading zone V metre 125.90


or coarser grade alround the GI pipes in
external work 32 mm diameter pipe.

18.41.5 Providing and filling sand grading zone V metre 127.49


or coarser grade alround the GI pipes in
external work 40 mm diameter pipe.

18.41.6 Providing and filling sand grading zone V metre 132.27


or coarser grade alround the GI pipes in
external work 50 mm diameter pipe.

18.41.7 Providing and filling sand grading zone V metre 208.76


or coarser grade alround the GI pipes in
external work 65 mm diameter pipe.

18.41.8 Providing and filling sand grading zone V metre 215.14


or coarser grade alround the GI pipes in

Puducherry Region
18. Water Supply
Page No.: 377
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

external work 80 mm diameter pipe.

18.41.9 Providing and filling sand grading zone V metre 227.89


or coarser grade alround the GI pipes in
external work 100 mm diameter pipe.

18.41.10 Providing and filling sand grading zone V metre 339.44


or coarser grade alround the GI pipes in
external work 150 mm diameter pipe.

18.42.1 Boring with 100 mm diameter casing pipe for metre 327.52
hand pump/ tubewell in all soils except
ordinary hard rocks requiring blasting
including removing the casing pipe after
the hand pipe / tubewell is lowered and
tested upto 6m depth.

18.42.2 Boring with 100 mm diameter casing pipe for metre 388.01
hand pump/ tubewell in all soils except
ordinary hard rocks requiring blasting
including removing the casing pipe after
the hand pipe /tubewell is lowered and
tested beyond 6m and upto 12m depth.

18.42.3 Boring with 100 mm diameter casing pipe for metre 450.85
hand pump/ tubewell in all soils except
ordinary hard rocks requiring blasting
including removing the casing pipe after
the hand pipe /tubewell is lowered and
tested beyond 12 m and upto 18 m depth.

18.43 Providing and placing in position filters metre 564.17


of 40 mm diameter G.I. pipe with brass
strainer of approved quality.

18.44 Providing and fixing to filter and lowering metre 410.87


to proper levels 40 mm G.I. pipe for tube
well including cleaning and priming the
tube well.

18.45 Providing and placing in position hand pump hand pump 1,735.81
of approved quality for 40 mm diameter G.I.
pipe complete with all accessories.

18.46.1 Providing and fixing G.I. union in G.I. each 190.96


pipe including cutting and threading the
pipe and making long screws etc. complete
(new work) 15 mm nominal bore.

18.46.2 Providing and fixing G.I. union in G.I. each 206.63


pipe including cutting and threading the
pipe and making long screws etc. complete

Puducherry Region
18. Water Supply
Page No.: 378
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

(new work) 20 mm nominal bore.

18.46.3 Providing and fixing G.I. union in G.I. each 221.09


pipe including cutting and threading the
pipe and making long screws etc. complete
(new work) 25 mm nominal bore.

18.46.4 Providing and fixing G.I. union in G.I. each 264.50


pipe including cutting and threading the
pipe and making long screws etc. complete
(new work) 32 mm nominal bore.

18.46.5 Providing and fixing G.I. union in G.I. each 305.49


pipe including cutting and threading the
pipe and making long screws etc. complete
(new work) 40 mm nominal bore.

18.46.6 Providing and fixing G.I. union in G.I. each 402.91


pipe including cutting and threading the
pipe and making long screws etc. complete
(new work) 50 mm nominal bore.

18.46.7 Providing and fixing G.I. union in G.I. each 484.89


pipe including cutting and threading the
pipe and making long screws etc. complete
(new work) 65 mm nominal bore.

18.46.8 Providing and fixing G.I. union in G.I. each 537.94


pipe including cutting and threading the
pipe and making long screws etc. complete
(new work) 80 mm nominal bore.

18.47.1 Providing and fixing G.I. Union in existing each 408.46


G.I. pipe line,cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required 15mm nominal bore.

18.47.2 Providing and fixing G.I. Union in existing each 424.14


G.I. pipe line,cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required 20 mm nominal bore.

18.47.3 Providing and fixing G.I. Union in existing each 438.60


GI pipe line, cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required 25 mm nominal bore.

Puducherry Region
18. Water Supply
Page No.: 379
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.47.4 Providing and fixing G.I. Union in existing each 482.01


GI pipe line, cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required 32 mm nominal bore.

18.47.5 Providing and fixing G.I. Union in existing each 523.00


GI pipe line, cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required
40mm nominal bore.

18.47.6 Providing and fixing G.I. Union in existing each 699.50


GI pipe line, cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required
50mm nominal bore.

18.47.7 Providing and fixing GI union in existing each 781.48


GI pipe line, cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required
65mm nominal bore.

18.47.8 Providing and fixing G.I. Union in existing each 834.53


GI pipe line, cutting and threading the
pipe and making long screws including
excavation, refilling the earth or cutting
of wall and making good the same complete
wherever required
80mm nominal bore.

18.48 Providing and placing on terrace (at all litre 7.85


floor levels) polyethylene water storage
tank ISI: 12701 marked with cover and
suitable locking arrangement and making
necessary holes for inlet outlet and
overflow pipes but without fittings and the
base support for tank

18.49.1 Providing and fixing CP brass bib cock of each 566.95


approved quality conforming to IS 8931 -
15mm nominal bore.

18.50.1 Providing and fixing CP brass long nose bib each 637.10

Puducherry Region
18. Water Supply
Page No.: 380
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cock of approved quality conforming to IS


standard and weighing not less than 810 gms
- 15mm nominal bore.

18.51.1 Providing and fixing CP brass long body bib each 692.44
cock of approved quality conforming to IS
standards and weighing not less than 690
gms - 15mm nominal bore.

18.52.1 Providing and fixing CP brass stop cock each 892.47


(concealed) of standard design and of
approved make conforming to IS 8931 - 15mm
nominal bore.

18.53.1 Providing and fixing CP brass angle valve each 396.40


for basin mixer and geyser points of
approved quality conforming to IS 8931 - 15
mm nominal bore.

18.54.1 Providing and fixing PTMT bib cock of each 143.61


approved quality and colour 15 mm nominal
bore, 86mm long weighing not less than 88
gms.

18.54.2 Providing and fixing PTMT bib cock of each 306.37


approved quality and colour 15mm nominal
bore, 122mm long weighing not less than 99
gms.

18.54.3 Providing and fixing PTMT bib cock of each 221.97


approved quality and colour 15 mm nominal
bore, 165mm long weighing not less than 110
gms.

18.54.4 Providing and fixing PTMT bib cock of each 191.83


approved quality and colour 15 mm nominal
bore, 90mm long weighing not less than
93gms.

18.55.1 Providing and fixing PTMT stop cock of each 143.61


approved quality and colour 15mm nominal
bore, 86mm long, weighing not less than 88
gms.

18.55.2 Providing and fixing PTMT stop cock of each 176.16


approved quality and colour 20mm nominal
bore, 89mm long, weighing not less than 88
gms.

18.55.3 Providing and fixing PTMT stop cock of each 268.99


approved quality and colour Concealed stop
cock,15mm nominal bore, 108mm long,

Puducherry Region
18. Water Supply
Page No.: 381
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

weighing not less than 108 gms.

18.56.1 Providing and fixing PTMT pillar cock of each 218.96


approved quality and colour 15mm nominal
bore, 107mm long, weighing not less than
110 grams.

18.56.2 Providing and fixing PTMT pillar cock of each 309.39


approved quality and colour 15 mm nominal
bore, 125mm long foam flow weighing not
less than 120 grams.

18.57.1 Providing and fixing PTMT push cock of each 136.37


approved quality and colour 15 mm nominal
bore, 98mm long, Weighing not less than 75
gms.

18.57.2 Providing and fixing PTMT push cock of each 115.87


approved quality and colour 15 mm nominal
bore, 80 mm long, Weighing not less than 46
gms.

18.58.1.1 Providing and fixing PTMT grating of each 48.56


approved quality and colour circular type
100mm nominal dia.

18.58.1.2 Providing and fixing PTMT grating of each 57.00


approved quality and colour circular type
125 mm nominal dia with 25 mm waste hole.

18.58.2.1 Providing and fixing PTMT grating of each 128.13


approved quality and colour Rectangular
type with openable Circular lid 150 mm
nominal size square 100 mm diameter of the
inner hinged round grating.

18.59.1 Providing and fixing CI double acting air air valve 4,339.90
valve of approved quality with bolts, nuts,
rubber insertions etc. complete (the tail
pieces , tapers etc if required will be
paid separately 50mm dia.

18.59.2 Providing and fixing CI double acting air air valve 5,732.41
valve of approved quality with bolts, nuts,
rubber insertions etc, complete (the tail
pieces, tapers etc if required will be paid
separately) 80mm dia.

18.59.3 Providing and fixing CI double acting air air valve 7,292.72
valve of approved quality with bolts, nuts,
rubber insertions etc, complete (the tail
pieces, tapers etc if required will be paid

Puducherry Region
18. Water Supply
Page No.: 382
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

separately) 100mm dia.

18.60.1 Providing and fixing enclosed type water water metr 3,317.24
meter (bulk type) conforming to IS 2373 and e
tested by Municipal Board complete with
bolts, nuts, rubber insertions etc,
(The tail pieces if required will be paid
separately) 80mm dia nominal bore.

18.60.2 Providing and fixing enclosed type water water metr 6,061.94
meter (bulk type) conforming to IS 2373 and e
tested by Municipal Board complete with
bolts, nuts, rubber insertions etc,
(The tail pieces if required will be paid
separately) 100 mm dia nominal bore.

18.60.3 Providing and fixing enclosed type water water metr 8,854.38
meter (bulk type) conforming to IS 2373 and e
tested by Municipal Board complete with
bolts, nuts, rubber insertions etc,
(The tail pieces if required will be paid
separately) 150 mm dia nominal bore.

18.60.4 Providing and fixing enclosed type water water metr 9,866.20
meter (bulk type) conforming to IS 2373 and e
tested by Municipal Board complete with
bolts, nuts, rubber insertions etc,
(The tail pieces if required will be paid
separately) 200 mm dia nominal bore.

18.61.1 Providing and fixing CI dirt box strainer dirt box s 3,838.69
for bulk type water meter with nuts, bolts, trainer
rubber insertions etc, complete onfirming
to IS 2373 80mm dia.

18.61.2 Providing and fixing CI dirt box strainer dirt box s 5,920.29
for bulk type water meter with nuts, bolts, trainer
rubber insertions etc, complete onfirming
to IS 2373 100mm dia.

18.61.3 Providing and fixing CI dirt box strainer dirt box s 8,127.37
for bulk type water meter with nuts, bolts, trainer
rubber insertions etc, complete onfirming
to IS 2373 150mm dia.

18.61.4 Providing and fixing CI dirt box strainer dirt box s 10,514.84
for bulk type water meter with nuts, bolts, trainer
rubber insertions etc, complete onfirming
to IS 2373 200mm dia.

18.62.1 Providing and fixing PTMT ball cock of each 205.89


approved quality, colour and make complete

Puducherry Region
18. Water Supply
Page No.: 383
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with epoxy coated rod with LP/HPHD plastic


ball 15 mm nominal bore, 105 mm long,
weighing not less than 138 grams.

18.62.2 Providing and fixing PTMT ball cock of each 288.25


approved quality, colour and make complete
with epoxy coated aluminium rod with
LP/HPHD plastic ball 20 mm nominal bore,
120 mm long, weighing not less than 198
grams.

18.62.3 Providing and fixing PTMT ball cock of each 592.47


approved quality, colour and make complete
with epoxy coated aluminium rod with
LP/HPHD plastic ball 25 mm nominal bore,
152 mm long, weighing not less than 440
grams.

18.62.4 Providing and fixing PTMT ball cock of each 1,056.64


approved quality, colour and make complete
with epoxy coated aluminium rod with
LP/HPHD plastic ball 40 mm nominal bore,
206 mm long, weighing not less than 690
grams.

18.62.5 Providing and fixing PTMT ball cock of each 1,553.37


approved quality, colour and make complete
with epoxy coated aluminium rod with
LP/HPHD plastic ball 50 mm nominal bore,
242 mm long, weighing not less than 1240
grams.

18.63 Providing and fixing PTMT angle stop cock each 176.16
15 mm nominal bore, weighing not less than
85 grams.

18.64 Providing and fixing PTMT swivelling each 121.57


shower, 15 mm nominal bore, weighing not
less than 40 grams.

18.65 Providing and fixing PTMT soap dish holder each 158.94
having length of 138 mm, breadth 102 mm,
height of 75 mm with concealed fitting
arrangements weighing not less than 106
grams

18.66.1 Providing and laying S&S CI standard quintal 7,631.32


special such as tees, bends, collar tapers
and caps etc, suitable for flanged jointing
as per IS 1538 upto 300 mm dia.

18.66.2 Providing and laying S&S CI standard quintal 7,631.32

Puducherry Region
18. Water Supply
Page No.: 384
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

special such as tees, bends, collar tapers


and caps etc, suitable for flanged jointing
as per IS 1538 above 300 mm dia.

18.67.1 Providing and laying S&S CI standard quintal 7,631.32


special suitable for mechanical jointing as
per IS 13382 upto 300 mm dia.

18.67.2 Providing and laying S&S CI standard quintal 8,349.88


special suitable for mechanical jointing as
per IS 13382 above 300mm dia.

18.68.1 Providing and laying DI specials of class quintal 15,950.22


K-12 suitable for push on jointing as per
IS 9523 upto 600mm dia.

18.68.2 Providing and laying DI specials of class K quintal 17,155.86


12 suitable for push on jointing as per IS
9523 above 600mm dia.

18.69.1 Providing and laying DI special of class K quintal 15,950.22


12 suitable for mechanical jointing as per
IS 9523 upto 600mm dia.

18.69.2 Providing and laying DI special of class K quintal 17,155.86


12 suitable for mechanical jointing as per
IS 9523 above 600mm dia.

18.70.1 Providing push on joints to centrifugally joint 66.99


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 100mm
dia pipes.

18.70.2 Providing push on joints to centrifugally joint 105.13


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 150mm
dia pipes.

18.70.3 Providing push on joints to centrifugally joint 158.18


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 200mm
dia pipes.

18.70.4 Providing push on joints to centrifugally joint 204.93


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 250mm
dia pipes.

Puducherry Region
18. Water Supply
Page No.: 385
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.70.5 Providing push on joints to centrifugally joint 255.45


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 300mm
dia pipes.

18.70.6 Providing push on joints to centrifugally joint 286.80


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 350mm
dia pipes.

18.70.7 Providing push on joints to centrifugally joint 381.56


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 400mm
dia pipes.

18.70.8 Providing push on joints to centrifugally joint 442.11


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 450mm
dia pipes.

18.70.9 Providing push on joints to centrifugally joint 508.12


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 500mm
dia pipes.

18.70.10 Providing push on joints to centrifugally joint 750.75


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 600mm
dia pipes.

18.70.11 Providing push on joints to centrifugally joint 796.76


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 650mm
dia pipes.

18.70.12 Providing push on joints to centrifugally joint 922.14


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 700mm
dia pipes.

18.70.13 Providing push on joints to centrifugally joint 1,046.85


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 800mm

Puducherry Region
18. Water Supply
Page No.: 386
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

dia pipes.

18.70.14 Providing push on joints to centrifugally joint 1,167.06


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 900mm
dia pipes.

18.70.15 Providing push on joints to centrifugally joint 1,424.82


(spun) cast iron pipes or ductile iron
pipes including testing of joints and
including the cost of rubber gasket 1000 mm
dia pipes.

18.71.1 Providing and laying Double flanged metre 1,451.98


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 100 mm dia CI double
flanged pipe.

18.71.2 Providing and laying Double flanged metre 2,252.02


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 150 mm dia CI double
flanged pipe.

18.71.3 Providing and laying Double flanged metre 3,117.94


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 200 mm dia CI double
flanged pipe.

18.71.4 Providing and laying Double flanged metre 4,174.19


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 250 mm dia CI double
flanged pipe.

18.71.5 Providing and laying Double flanged metre 5,306.83


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536)
300 mm dia CI double flanged pipe.

18.71.6 Providing and laying Double flanged metre 6,784.80


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 350 mm dia CI double
flanged pipe.

18.71.7 Providing and laying Double flanged metre 8,754.94


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 400 mm dia CI double
flanged pipe.

18.71.8 Providing and laying Double flanged metre 11,322.54


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 450 mm dia CI double

Puducherry Region
18. Water Supply
Page No.: 387
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

flanged pipe.

18.71.9 Providing and laying Double flanged metre 15,349.06


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 500 mm dia CI double
flanged pipe.

18.71.10 Providing and laying Double flanged metre 19,251.09


(screwed/Welded) centrifugally (Spun) cast
iron class B (IS 1536) 600 mm dia CI double
flanged pipe.

18.72.1 Providing and laying S&S centrifugally cast metre 1,232.69


(spun) / Ductile iron pipes conforming to
IS 8329 - 100 mm dia ductile iron class K-7
pipes.

18.72.2 Providing and laying S&S centrifugally cast metre 1,803.99


(spun) / Ductile iron pipes conforming to
IS 8329 - 150mm dia ductile iron class K-7
pipes.

18.72.3 Providing and laying S&S centrifugally cast metre 2,331.74


(spun) / Ductile iron pipes conforming to
IS 8329 - 200 mm dia ductile iron class K-7
pipes.

18.72.4 Providing and laying S&S centrifugally cast metre 3,081.66


(spun) / Ductile iron pipes conforming to
IS 8329 - 250 mm dia ductile iron class K-7
pipes.

18.72.5 Providing and laying S&S centrifugally cast metre 3,907.40


(spun) / Ductile iron pipes conforming to
IS 8329 - 300mm dia ductile iron class K-7
pipes.

18.72.6 Providing and laying S&S centrifugally cast metre 4,911.78


(spun) / Ductile iron pipes conforming to
IS 8329 - 350mm dia ductile iron class K-7
pipes.

18.72.7 Providing and laying S&S centrifugally cast metre 5,910.92


(spun) / Ductile iron pipes conforming to
IS 8329 - 400 mm dia ductile iron class K-7
pipes.

18.72.8 Providing and laying S&S centrifugally cast metre 6,584.48


(spun) / Ductile iron pipes conforming to
IS 8329 - 450 mm dia ductile iron class K-7
pipes.

Puducherry Region
18. Water Supply
Page No.: 388
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.72.9 Providing and laying S&S centrifugally cast metre 8,137.58


(spun) / Ductile iron pipes conforming to
IS 8329 - 500 mm dia ductile iron class K-7
pipes.

18.72.10 Providing and laying S&S centrifugally cast metre 10,730.07


(spun) / Ductile iron pipes conforming to
IS 8329 - 600 mm dia ductile iron class K-7
pipes.

18.72.11 Providing and laying S&S centrifugally cast metre 14,381.00


(spun) / Ductile iron pipes conforming to
IS 8329 - 700 mm dia ductile iron class K-7
pipes.

18.72.12 Providing and laying S&S centrifugally cast metre 19,223.27


(spun) / Ductile iron pipes conforming to
IS 8329 - 800 mm dia ductile iron class K-7
pipes.

18.72.13 Providing and laying S&S centrifugally cast metre 22,905.20


(spun) / Ductile iron pipes conforming to
IS 8329 - 900 mm dia ductile iron class K-7
pipes.

18.72.14 Providing and laying S&S centrifugally cast metre 26,942.17


(spun) / Ductile iron pipes conforming to
IS 8329 - 1000 mm dia ductile iron class
K-7 pipes.

18.72.15 Providing and laying S&S centrifugally cast metre 1,388.00


(spun) / Ductile iron pipes conforming to
IS 8329 - 100 mm dia ductile iron class K-9
pipes.

18.72.16 Providing and laying S&S centrifugally cast metre 2,070.62


(spun) / Ductile iron pipes conforming to
IS 8329 - 150 mm dia ductile iron class K-9
pipes.

18.72.17 Providing and laying S&S centrifugally cast metre 2,711.81


(spun) / Ductile iron pipes conforming to
IS 8329 - 200 mm dia ductile iron class K-9
pipes.

18.72.18 Providing and laying S&S centrifugally cast metre 3,564.42


(spun) / Ductile iron pipes conforming to
IS 8329 - 250 mm dia ductile iron class K-9
pipes.

18.72.19 Providing and laying S&S centrifugally cast metre 4,514.40


(spun) / Ductile iron pipes conforming to

Puducherry Region
18. Water Supply
Page No.: 389
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

IS 8329 - 300 mm dia ductile iron class K-9


pipes.

18.72.20 Providing and laying S&S centrifugally cast metre 5,653.77


(spun) / Ductile iron pipes conforming to
IS 8329 - 350 mm dia ductile iron class K-9
pipes.

18.72.21 Providing and laying S&S centrifugally cast mrtre 6,789.53


(spun) / Ductile iron pipes conforming to
IS 8329 - 400 mm dia ductile iron class K-9
pipes.

18.72.22 Providing and laying S&S centrifugally cast metre 7,766.52


(spun) / Ductile iron pipes conforming to
IS 8329 - 450 mm dia ductile iron class K-9
pipes.

18.72.23 Providing and laying S&S centrifugally cast metre 9,370.21


(spun) / Ductile iron pipes conforming to
IS 8329 - 500 mm dia ductile iron class K-9
pipes.

18.72.24 Providing and laying S&S centrifugally cast metre 12,393.86


(spun) / Ductile iron pipes conforming to
IS 8329 - 600 mm dia ductile iron class K-9
pipes.

18.72.25 Providing and laying S&S centrifugally cast metre 15,816.05


(spun) / Ductile iron pipes conforming to
IS 8329 - 700 mm dia ductile iron class K-9
pipes.

18.72.26 Providing and laying S&S centrifugally cast metre 17,802.94


(spun) / Ductile iron pipes conforming to
IS 8329 - 750 mm dia ductile iron class K-9
pipes.

18.72.27 Providing and laying S&S centrifugally cast metre 20,013.27


(spun) / Ductile iron pipes conforming to
IS 8329 - 800 mm dia ductile iron class K-9
pipes.

18.72.28 Providing and laying S&S centrifugally cast metre 24,084.55


(spun) / Ductile iron pipes conforming to
IS 8329 - 900 mm dia ductile iron class K-9
pipes.

18.72.29 Providing and laying S&S centrifugally cast metre 26,988.33


(spun) / Ductile iron pipes conforming to
IS 8329 - 1000 mm dia ductile iron class
K-9 pipes.

Puducherry Region
18. Water Supply
Page No.: 390
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.73.1 Providing and laying double flanged metre 1,393.83


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 100 mm dia ductile iron double
flanged.

18.73.2 Providing and laying double flanged metre 2,079.76


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 150 mm dia ductile iron double
flanged.

18.73.3 Providing and laying double flanged metre 2,723.43


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 200 mm dia ductile iron double
flanged.

18.73.4 Providing and laying double flanged metre 3,580.87


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 250 mm dia ductile iron double
flanged.

18.73.5 Providing and laying double flanged metre 4,537.36


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 300 mm dia ductile iron double
flanged.

18.73.6 Providing and laying double flanged metre 5,670.61


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 350 mm dia ductile iron double
flanged.

18.73.7 Providing and laying double flanged metre 6,808.58


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 400 mm dia ductile iron double
flanged.

18.73.8 Providing and laying double flanged metre 7,790.81


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 450 mm dia ductile iron double
flanged.

18.73.9 Providing and laying double flanged metre 9,396.94


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 500 mm dia ductile iron double

Puducherry Region
18. Water Supply
Page No.: 391
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

flanged.

18.73.10 Providing and laying double flanged metre 12,437.62


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 600 mm dia ductile iron double
flanged.

18.73.11 Providing and laying double flanged metre 15,870.11


(screwed/welded) centrifugally (spun)
ductile iron pipes of class K 9 conforming
to IS 8329 - 700 mm dia ductile iron double
flanged.

18.74.1 Providing and fixing and unplastisised PVC each 67.98


connection pipe with PTMT nuts of approved
quality and colour 15 mm nominal bore with
30 cm length.

18.74.2 Providing and fixing unplastisised PVC each 79.17


connection pipe with PTMT nuts of approved
quality and colour 15 mm nominal bore with
45 cm length.

18.75.1 Providing and fixing PTMT extension nipple each 55.37


for water tank pipe, fittings of approved
quality and colour 15 mm nominal bore,
weighing not less than 32 grams.

18.75.2 Providing and fixing PTMT extension nipple each 63.81


for water tank pipe, fittings of approved
quality and colour 20 mm nominal bore,
weighing not less than 40 grams.

18.75.3 Providing and fixing PTMT extension nipple each 93.95


for water tank pipe, fittings of approved
quality and colour 25 mm nominal bore,
weighing not less than 62 grams.

18.76.1 Cutting holes upto 30x30 cm in walls hole 210.92


including making good the same with FPS
bricks.

18.77 Cutting holes upto 15x15 cm in Rcc floors hole 217.19


and roofs for passing drain pipe etc. and
reparing the hole after insertion of drain
pipe etc. with cement concrete 1:2:4 (1
cement, 2 coarse sand, 4 graded stone
aggregate 20 mm nominal size) including
finishing complete so as to make it leak
proof.

Puducherry Region
18. Water Supply
Page No.: 392
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

18.78 Making chases upto 7.5 x7.5 cm in walls metre 91.52


including making good and finishing with
matching surface after housing GI pipe etc.

18.79 Making hole upto 20x20 cm and embedding metre 123.25


pipes upto 150 mm diameter in masonry and
filling with cement concrete 1:3:6 (1
cement ,3 coarse sand, 6 graded stone
aggregate 20 mm nominal size) including
disposal of malba.

18.80.1 Disinfecting CI water mains by flushing metre 7.58


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 80 mm
diameter CI pipe.

18.80.2 Disinfecting CI water mains by flushing metre 10.07


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 100 mm
diameter CI pipe.

18.80.3 Disinfecting CI water mains by flushing metre 12.71


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 125 mm
diameter CI pipe.

18.80.4 Disinfecting CI water mains by flushing metre 15.42


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 150 mm
diameter CI pipe.

18.80.5 Disinfecting CI water mains by flushing metre 20.93


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the

Puducherry Region
18. Water Supply
Page No.: 393
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sample of water from the disinfected main


tested in the municipal labortory 200 mm
diameter CI pipe.

18.80.6 Disinfecting CI water mains by flushing metre 26.78


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 250 mm
diameter CI pipe.

18.80.7 Disinfecting CI water mains by flushing metre 30.43


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 300 mm
diameter CI pipe.

18.80.8 Disinfecting CI water mains by flushing metre 34.33


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 350 mm
diameter CI pipe.

18.80.9 Disinfecting CI water mains by flushing metre 38.58


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 400 mm
diameter CI pipe.

18.80.10 Disinfecting CI water mains by flushing metre 42.99


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 450 mm
diameter CI pipe.

18.80.11 Disinfecting CI water mains by flushing metre 47.73


with water containing bleaching powder at
0.5 grams per litre of water and cleaning

Puducherry Region
18. Water Supply
Page No.: 394
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the same with fresh water, operation to be


repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 500 mm
diameter CI pipe.

18.80.12 Disinfecting CI water mains by flushing metre 57.74


with water containing bleaching powder at
0.5 grams per litre of water and cleaning
the same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the municipal labortory 600 mm
diameter CI pipe.

18.81.1 Extra for every operation of disinfecting metre 2.77


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
80 mm diameter CI pipes.

18.81.2 Extra for every operation of disinfecting metre 3.42


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
100 mm diameter CI pipes.

18.81.3 Extra for every operation of disinfecting metre 4.24


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
125 mm diameter CI pipes.

18.81.4 Extra for every operation of disinfecting metre 5.01


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
150 mm diameter CI pipes.

18.81.5 Extra for every operation of disinfecting metre 7.84


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples

Puducherry Region
18. Water Supply
Page No.: 395
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of water tested in the municipal laboratory


200 mm diameter CI pipes.

18.81.6 Extra for every operation of disinfecting metre 9.13


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
250 mm diameter CI pipes.

18.81.7 Extra for every operation of disinfecting metre 10.37


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
300 mm diameter CI pipes.

18.81.8 Extra for every operation of disinfecting metre 12.34


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
350 mm diameter CI pipes.

18.81.9 Extra for every operation of disinfecting metre 14.37


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
400 mm diameter CI pipes.

18.81.10 Extra for every operation of disinfecting metre 16.52


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
450 mm diameter CI pipes.

18.81.11 Extra for every operation of disinfecting metre 17.71


the CI main by flushing with water
contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
500 mm diameter CI pipes.

18.81.12 Extra for every operation of disinfecting metre 23.29

Puducherry Region
18. Water Supply
Page No.: 396
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the CI main by flushing with water


contaning bleaching powder at 0.5 grams per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the municipal laboratory
600 mm diameter CI pipes.

18.82.1 Dismantling old CI pipes including metre 185.47


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 80mm diameter C.I
pipe.

18.82.2 Dismantling old CI pipes including metre 191.82


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 100mm diameter C.I
pipe.

18.82.3 Dismantling old CI pipes including metre 197.07


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 125 mm diameter C.I
pipe.

18.82.4 Dismantling old CI pipes including metre 202.97


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 150mm diameter C.I
pipe.

18.82.5 Dismantling old CI pipes including metre 224.05


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 200 mm diameter C.I
pipe.

18.82.6 Dismantling old CI pipes including metre 244.49


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site

Puducherry Region
18. Water Supply
Page No.: 397
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

lead upto 50 metre - 250mm diameter C.I


pipe.

18.82.7 Dismantling old CI pipes including metre 262.83


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 300 mm diameter C.I
pipe.

18.82.8 Dismantling old CI pipes including metre 280.07


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 350mm diameter C.I
pipe.

18.82.9 Dismantling old CI pipes including metre 295.44


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 400mm dia metre C.I
pipe.

18.82.10 Dismantling old CI pipes including metre 311.33


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 450 mm diametre C.I
pipe.

18.82.11 Dismantling old C.I pipes including metre 324.80


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 500 mm diametre C.I.
pipe.

18.82.12 Dismantling old CI pipes including metre 347.49


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site
lead upto 50 metre - 600 mm diametre C.I
pipe.

18.83.1 Labour for cutting C.I. pipe with steel saw each cut 63.16

Puducherry Region
18. Water Supply
Page No.: 398
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

80 mm diameter C.I. pipe.

18.83.2 Labour for cutting C.I. pipe with steel saw each cut 84.85
100 mm diameter C.I. pipe.

18.83.3 Labour for cutting C.I. pipe with steel saw each cut 118.08
125 mm diameter C.I. pipe.

18.83.4 Labour for cutting C.I. pipe with steel saw each cut 159.54
150 mm diameter C.I. pipe.

18.83.5 Labour for cutting C.I. pipe with steel saw each cut 212.81
200 mm diameter C.I. pipe.

18.83.6 Labour for cutting C.I. pipe with steel saw each cut 264.17
250 mm diameter C.I. pipe.

18.83.7 Labour for cutting C.I. pipe with steel saw each cut 317.43
300 mm diameter C.I. pipe.

18.83.8 Labour for cutting C.I. pipe with steel saw each cut 368.78
350 mm diameter C.I. pipe.

18.83.9 Labour for cutting C.I. pipe with steel saw each cut 421.78
400 mm diameter C.I. pipe.

18.83.10 Labour for cutting C.I. pipe with steel saw each cut 473.41
450 mm diameter C.I. pipe.

18.83.11 Labour for cutting C.I. pipe with steel saw each cut 528.32
500 mm diameter C.I. pipe.

18.83.12 Labour for cutting C.I. pipe with steel saw each cut 627.18
600 mm diameter C.I. pipe.

18.85.1 Providing and fixing CP brass pillar cock no 596.79


of approved quality - 15 mm nominal bore

Puducherry Region
19. Drainage
Page No.: 399
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

19.2.1 Providing and laying cement concrete 1:5:10 metre 570.72


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 100 mm diameter SW pipe.

19.2.2 Providing and laying cement concrete 1:5:10 metre 697.97


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 150 mm diameter SW pipe.

19.2.3 Providing and laying cement concrete 1:5:10 metre 813.66


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 200mm diameter SW pipe.

19.2.4 Providing and laying cement concrete 1:5:10 metre 890.78


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 230 mm diameter SW pipe.

19.2.5 Providing and laying cement concrete 1:5:10 metre 940.91


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 250 mm diameter SW pipe.

19.3.1 Providing and laying cement concrete 1:5:10 metre 271.25


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 100 mm diameter SW pipe.

19.3.2 Providing and laying cement concrete 1:5:10 metre 439.60


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 150 mm diameter SW pipe.

19.3.3 Providing and laying cement concrete 1:5:10 metre 516.73


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 200 mm diameter SW pipe.

19.3.4 Providing and laying cement concrete 1:5:10 metre 566.86


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per

Puducherry Region
19. Drainage
Page No.: 400
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

standard design - 230 mm diameter SW pipe.

19.3.5 Providing and laying cement concrete 1:5:10 metre 601.57


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 230 mm diameter SW pipe.

19.3.6 Providing and laying cement concrete 1:5:10 metre 694.11


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 300 mm diameter SW pipe.

19.4.1.1 Providing and fixing square mouth SW gully trap 1,623.65


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 100x100mm size P
type with FPS Bricks class designation 75.

19.4.1.2 Providing and fixing square mouth SW gully trap 1,575.87


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 100x100mm size P
type with Sewer bricks conforming to IS
4885.

19.4.2.1 Providing and fixing square mouth SW gully trap 1,615.05


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 150x100mm size P
type with FPS bricks class designation 75.

19.4.2.2 Providing and fixing square mouth SW gully trap 1,575.70


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 150x100mm size P
type with sewer bricks conforming to IS:
4885.

Puducherry Region
19. Drainage
Page No.: 401
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

19.4.3.1 Providing and fixing square mouth SW gully trap 1,642.22


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 180x150mm size P
type with FPS bricks class designation 75.

19.4.3.2 Providing and fixing square mouth SW gully trap 1,594.46


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 180x150mm size P
type with Sewer bricks conforming to IS
4885.

19.5.1 Dismantling of old SW pipes including metre 31.93


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 100 mm diameter.

19.5.2 Dismantling of old SW pipes including metre 35.18


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 150 mm diameter.

19.5.3 Dismantling of old SW pipes including metre 37.35


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 200 mm diameter.

19.5.4 Dismantling of old SW pipes including metre 38.44


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 230 mm diameter.

19.5.5 Dismantling of old SW pipes including metre 39.52


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal

Puducherry Region
19. Drainage
Page No.: 402
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

dumps - 250 mm diameter.

19.5.6 Dismantling of old SW pipes including metre 41.69


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 300 mm diameter.

19.5.7 Dismantling of old SW pipes including metre 48.11


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 350 mm diameter.

19.5.8 Dismantling of old SW pipes including metre 52.59


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 400 mm diameter.

19.5.9 Dismantling of old SW pipes including metre 54.76


breaking of joints and bed concrete
stacking of useful materials near the site
within 50m lead and disposal of
unserviceable materials into municipal
dumps - 450 mm diameter.

19.6.1 Providing and laying non pressure NP2 class metre 309.74
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
100 mm dia RCC pipe.

19.6.2 Providing and laying non pressure NP2 class metre 385.69
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
150 mm dia RCC pipe.

19.6.3 Providing and laying non pressure NP2 class metre 485.87
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
250 mm dia RCC pipe.

19.6.4 Providing and laying non pressure NP2 class metre 1,011.82

Puducherry Region
19. Drainage
Page No.: 403
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

(light duty) RCC pipes with collars jointed


with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
300 mm dia RCC pipe.

19.6.5 Providing and laying non pressure NP2 class metre 1,393.49
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
450 mm dia RCC pipe.

19.6.6 Providing and laying non pressure NP2 class metre 1,530.73
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
500 mm dia RCC pipe.

19.6.7 Providing and laying non pressure NP2 class metre 1,756.41
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
600 mm dia RCC pipe.

19.6.8 Providing and laying non pressure NP2 class metre 1,968.21
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
700 mm dia RCC pipe.

19.6.9 Providing and laying non pressure NP2 class metre 2,569.62
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
800 mm dia RCC pipe.

19.6.10 Providing and laying non pressure NP2 class metre 3,047.93
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
900 mm dia RCC pipe.

19.6.11 Providing and laying non pressure NP2 class metre 3,939.12
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)

Puducherry Region
19. Drainage
Page No.: 404
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including testing of joints etc, complete -


1000 mm dia RCC pipe.

19.6.12 Providing and laying non pressure NP2 class metre 4,641.36
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
1100 mm dia RCC pipe.

19.6.13 Providing and laying non pressure NP2 class metre 5,493.06
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
1200 mm dia RCC pipe.

19.7.1.1 Constructing brick masonry manhole in each 8,253.53


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 : cement :
2 Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement complete as
per standard design
Inside size 90x80 cm and 45 cm deep
including CI cover with frame (light duty)
455x610 mm internal dimensions total
weight of cover and frame to be not less
than 38 kg(weight of cover 23 kg and weight
of frame 15 kg) with F.P.S bricks with
class designation 75.

19.7.1.2 Constructing brick masonry manhole in each 8,128.59


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 : cement :
2 Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone

Puducherry Region
19. Drainage
Page No.: 405
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

aggregate 20 mm nominal size) finished


with a floating coat of neat cement
complete as per standard design
Inside size 90x80 cm and 45 cm deep
including CI cover with frame (light duty)
455x610 mm internal dimensions total
weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) with sewer bricks
conforming to IS 4885.

19.7.2.1 Constructing brick masonry manhole in each 14,813.52


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (medium duty)
500 mm internal diameter total weight of
cover and frame to be not less than 116 kg
(weight of cover 58 kg and weight of frame
58 kg) with F.P.S bricks with class
designation 75.

19.7.2.2 Constructing brick masonry manhole in each 14,471.78


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (medium duty)
500 mm internal diameter total weight of

Puducherry Region
19. Drainage
Page No.: 406
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cover and frame to be not less than 116 kg


(weight of cover 58 kg and weight of frame
58 kg) with sewer bricks conforming to IS
4885.

19.7.3.1 Constructing brick masonry manhole in each 16,273.00


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand :4 graded stone aggregate 20 mm
nominal size) foundation concrete 1:4:8 mix
(1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand :4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (heavy duty)
560 mm internal diameter total weight of
cover with frame to be not less than 208 kg
(weight of cover 108 kg and weight of frame
100 kg) with F.P.S bricks with class
designation 75.

19.7.3.2 Constructing brick masonry manhole in each 15,979.03


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (heavy duty)
560 mm internal diameter total weight of
cover and frame to be not less than 208 kg
(weight of cover 108 kg and weight of frame
100 kg) with sewer bricks conforming to IS
4885.

19.8.1.1 Extra for depth for man holes. Size 90x80 metre 5,557.90

Puducherry Region
19. Drainage
Page No.: 407
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cm with F.P.S bricks class designation 75.

19.8.1.2 Extra for depth for man holes. Size 90x80 metre 5,194.12
cm with sewer bricks conforming to IS 4885.

19.8.2.1 Extra for depth for man holes. Size 120x90 metre 6,659.43
cm with F.P.S bricks class designation 75.

19.8.2.2 Extra for depth for man holes. Size 120x90 metre 6,225.84
cm with sewer bricks conforming to IS 4885.

19.9.1.1 Constructing brick masonry circular type each 8,948.03


manhole 0.91 metre internal dia at bottom
and 0.56 metre dia at top in cement mortar
1:4 (1 cement : 4 coarse sand) inside
cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat
cement, foundation concrete 1:3:6 mix (1
cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement all complete
as per standard design 0.91 metre deep with
S.F.R.C cover and frame (heavy duty, HD- 20
grade designation) 560 mm internal diameter
conforming to IS 12592, total weight of
cover and frame to be not less than 182 kg
, fixed in cement concrete 1:2:4 (1cement :
2 coarse sand :4graded stone aggregate 20mm
nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid for
separately) With F.P.S bricks class
designation 75.

19.9.1.2 Constructing brick masonry circular type each 8,668.02


manhole 0.91 metre internal dia at bottom
and 0.56 metre dia at top in cement mortar
1:4 (1 cement : 4 coarse sand) inside
cement plaster 12 mm thick with cement
mortar 1:3 (1 cement :3 coarse sand)
finished with a floating coat of neat
cement, foundation concrete 1:3:6 mix (1
cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with

Puducherry Region
19. Drainage
Page No.: 408
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

a floating coat of neat cement all complete


as per standard design 0.91 metre deep with
S.F.R.C cover and frame (heavy duty, HD- 20
grade designation) 560 mm internal diameter
and conforming to IS 12592, total weight of
cover and frame to be not less than 182 kg
, fixed in cement concrete 1:2:4 (1cement :
2coarse sand : 4 graded stone aggregate
20mm nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid separately)
With Sewer bricks conforming to IS 4885.

19.10.1 Extra depth for circular type manhole 0.91 metre dept 7,359.79
m internal dia (at bottom) beyond 0.91m to h
1.67m With F.P.S bricks class designation
75.

19.10.2 Extra depth for circular type manhole 0.91 metre extr 4,473.71
m internal dia (at bottom) beyond 0.91m to a depth
1.67m With Sewer bricks conforming IS 4885.

19.11.1.1 Constructing brick masonry circular manhole each 16,514.59


1.22m internal dia at bottom and 0.56m dia
at top in cement mortar 1:4 (1 cement : 4
coarse sand) inside cement plaster 12 mm
thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement foundation concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone
aggregate 40mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished with
a floating coat of neat cement all complete
as per standard design 1.68 m deep with
SFRC cover and frame (heavy duty HD-20
grade designation) 560mm internal diameter
conforming to IS 12592, total weight of
cover and frame to be not less than 182 Kg.
fixed in cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate 20
mm nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid separately)
with F.P.S bricks class designation 75.

19.11.1.2 Constructing brick masonry circular manhole each 16,034.87


1.22m internal dia at bottom and 0.56m dia
at top in cement mortar 1:4 (1cement : 4

Puducherry Region
19. Drainage
Page No.: 409
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

coarse sand) inside cement plaster 12mm


thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement foundation concrete 1:3:6
(1cement : 3 coarse sand : 6 graded stone
aggregate 40mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement all complete
as per standard design 1.68m deep with SFRC
cover and frame (heavy duty HD-20 grade
designation) 560mm internal diameter
conforming to IS 12592, total weight of
cover and frame to be not less than 182 Kg.
fixed in cement concrete 1:2:4 (1cement :
2coarse sand : 4 graded stone aggregate
20mm nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid separately)
with sewer bricks conforming IS :4885.

19.12.1 Extra depth for circular type manhole 1.22 metre extr 5,790.34
metre internal dia (at bottom) beyond 1.68 a depth
metre to 2.29 metre with F.P.S bricks class
designation 75.

19.12.2 Extra depth for circular type manhole 1.22 metre extr 5,790.34
metre internal dia (at bottom) beyond 1.68 a depth
metre to 2.29 metre with sewer bricks
conforming to IS 4885.

19.13.1.1 Constructing brick masonry circular manhole each 34,690.88


1.52 metre internal dia at bottom and 0.56
m dia at top in cement mortar 1:4 (1
cement, 4 coarse sand) inside cement
plaster 12 mm thick with cement mortar 1:3
(1 cement,3 coarse sand) finished with a
floating coat of neat cement, foundation
concrete 1:3:6 (1 cement, 3 coarse sand, 6
graded stone aggregate 40 mm nominal size)
and making necessary channel in cement
concrete 1:2:4 (1 cement, 2 coarse sand, 4
graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat
cement all complete as per standard design
2.30 m deep with S.F.R.C cover in frame
(heavy duty HD -20 grade designation) 560
mm internal diameter conforming to IS
12592, total weight of cover and frame to
be not less than 182 kg fixied in cement

Puducherry Region
19. Drainage
Page No.: 410
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

concrete 1:2:4 (1 cement, 2 coarse sand, 4


graded stone aggregate 20 mm nominal size)
including centering, shuttering all
complete (excavation footrest and 12 mm
thick cement plaster at the external
surface shall be paid for separately with
F.P.S bricks class designation 75.

19.13.1.2 Constructing brick masonry circular manhole each 33,327.24


1.52 metre internal dia at bottom and 0.56
m dia at top in cement mortar 1:4 (1
cement, 4 coarse sand) inside cement
plaster 12 mm thick with cement mortar 1:3
(1 cement,3 coarse sand) finished with a
floating coat of neat cement, foundation
concrete 1:3:6 (1 cement, 3 coarse sand, 6
graded stone aggregate 40 mm nominal size)
and making necessary channel in cement
concrete 1:2:4 (1 cement, 2 coarse sand, 4
graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat
cement all complete as per standard design
2.30 m deep with S.F.R.C cover in frame
(heavy duty HD -20 grade designation) 560
mm internal diameter conforming to IS
12592, total weight of cover and frame to
be not less than 182 kg fixied in cement
concrete 1:2:4 (1 cement, 2 coarse sand, 4
graded stone aggregate 20 mm nominal size)
including centering, shuttering all
complete (excavation footrest and 12 mm
thick cement plaster at the external
surface shall be paid for separately with
sewer bricks conforming IS:4885.

19.14.1 Extra depth for circular type manhole 1.52 metre extr 14,566.17
m internal dia (at bottom) beyond 2.30 m: a depth
with F.P.S bricks class designation 75.

19.14.2 Extra depth for circular type manhole 1.52 metre extr 13,538.07
m internal dia (at bottom) beyond 2.30 m: a depth
with sewer bricks conforming IS: 4885.

19.15.1 Providing M.S foot rests including fixing MS foot re 280.85


in manholes with 20x20x10 cm cement st
concrete blocks 1:3:6(1 cement, 3 coarse
sand, 6 graded stone aggregate 20 mm
nominal size) as per standard design: with
20x20 mm square bar.

19.15.2 Providing M.S foot rests including fixing MS foot re 244.46


in manholes with 20x20x10 cm cement st

Puducherry Region
19. Drainage
Page No.: 411
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

concrete blocks 1:3:6(1 cement, 3 coarse


sand, 6 graded stone aggregate 20 mm
nominal size) as per standard design : with
20 mm diameter round bar.

19.16 Providing orange colour safety foot rest of no. 346.07


minimum 6 mm thick plastic encapsulated as
per IS : 10910 on 12mm dia steel bar
conforming to IS : 1786 having minimum
cross section as 23 mmx25mm and over all
minimum length 263 mm and width as 165mm
with minimum 112 mm space between protruded
legs having 2 mm tread on top surface by
ribbing or chequering besides necessary and
adequate anchoring projections on tail
length on 138 mm as per standard drawing
and suitable to withstand the bend test and
chemical resistance test as per
specifications and having manufacture's
permanent identification mark to be visible
even after fixing, including fixing in
manholes with 30x20x15 cm cement concrete
block 1:3:6 (1 cement: 3 coarse sand: 6
graded stone aggregate 20 mm nominal size)
complete as per design.

19.17.1 Replacement of M.S foot rests in manholes no. 337.40


including dismantling concrete blocks and
fixing with 20x20x10cm cement concrete
blocks 1:3:6 (1cement : 3 coarse sand : 6
graded stone aggregate 20mm nominal size)
with 20x20 mm square bar.

19.17.2 Replacement of M.S foot rests in manholes no. 304.85


including dismantling concrete blocks and
fixing with 20x20x10cm cement concrete
blocks 1:3:6 (1cement : 3 coarse sand : 6
graded stone aggregate 20mm nominal size)
with 20 mm diameter round bar.

19.18.1 Supplying and fixing CI cover without frame cover 661.16


for manholes 455x610mm rectangular CI cover
(light duty) the weight of the cover to be
not less than 23 Kg.

19.18.2 Supplying and fixing CI cover without frame no. 1,493.06


for manholes 500mm diameter CI cover
(medium duty) the weight of the cover to be
not less than 58 kg.

19.18.3 Supplying and fixing CI cover without frame no. 2,132.04


for manholes 560mm diameter CI cover (Heavy

Puducherry Region
19. Drainage
Page No.: 412
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

duty) the weight of the cover to be not


less than 108 kg.

19.19.1.1 Providing and fixing in position precast no. 1,274.65


R.C.C manhole cover and frame of required
shape and approved quality LD-2.5
Rectangular shape 600x450mm internal
dimensions.

19.19.1.2 Providing and fixing in position precast no. 1,086.71


R.C.C manhole cover and frame of required
shape and approved quality LD-2.5 Square
shape 450mm internal dimensions.

19.19.1.3 Providing and fixing in position precast no. 1,026.43


R.C.C manhole cover and frame of required
shape and approved quality LD-2.5 circular
shape 450mm internal dimensions.

19.19.2.1 Providing and fixing in position precast no. 1,341.53


R.C.C manhole cover and frame of required
shape and approved quality MD-10 Square
shape 450mmx450mm internal dimensions.

19.19.2.2 Providing and fixing in position precast no. 1,286.20


R.C.C manhole cover and frame of required
shape and approved quality MD-10 Circular
shape 500 mm internal diameter.

19.19.3.1 Providing and fixing in position precast no. 1,733.94


R.C.C manhole cover and frame of required
shape and approved quality HD-20 Circular
shape 560 mm internal diameter.

19.19.4.1 Providing and fixing in position precast no. 3,524.30


R.C.C manhole cover and frame of required
shape and approved quality EHD-35 Circular
shape 560 mm internal diameter.

19.20 Supplying and fixing CI cover 300x300mm cover 445.61


without frame for gully trap (standard
pattern) the weight of cover to be not less
than 4.5kg

19.21.1 Making connection of drain or sewer line connection 402.43


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1cement, 2coarse
sand, 4 graded stone aggregate 20mm nominal
size) cement plastered on both sides with
cement mortar 1:3 (1cement, 3 coarse sand)
finished with a floating coat of neat

Puducherry Region
19. Drainage
Page No.: 413
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement and making necessary channels for


the drain etc. complete for pipes 100 to
230 mm diameter.

19.21.2 Making connection of drain or sewer line connection 475.40


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1cement, 2coarse
sand, 4 graded stone aggregate 20mm nominal
size) cement plastered on both sides with
cement mortar 1:3 (1cement, 3 coarse sand)
finished with a floating coat of neat
cement and making necessary channels for
the drain etc. complete for pipes 250 to
300 mm diameter.

19.21.3 Making connection of drain or sewer line connection 690.65


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement, 2
coarse sand, 4 graded stone aggregate 20mm
nominal size) cement plastered on both
sides with cement mortar 1:3 (1cement, 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete for
pipes 350 to 450 mm diameter.

19.22.1 Providing sand cast iron drop connection drop conne 6,667.02
externally for 60 cm drop from branch sewer ction
line to main sewer manhole including
inspection and cleaning eye with chain and
lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1cement, 5 fine sand ,10 graded stone
aggregate 40mm nominal size) with all
centring and shuttering required, cutting
holes in walls and making good with brick
work in cement mortar 1:4 (1cement ,4coarse
sand) plastered with cement mortar 1:3 (one
cement, 3coarse sand) on inside of the
manhole wall lead caulked joints between
sand cast iron pipes, and fittings, stiff
cement mortar 1:1(1cement 1fine sand)
joints between sand cast iron tee and S.W
pipe, making required channels complete as
per standard design and specifications
100mm dia sand cast iron drop connection

19.22.2 Providing sand cast iron drop connection drop conne 9,616.09
externally for 60 cm drop from branch sewer ction
line to main sewer manhole including

Puducherry Region
19. Drainage
Page No.: 414
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

inspection and cleaning eye with chain and


lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1cement, 5 fine sand ,10 graded stone
aggregate 40mm nominal size) with all
centring and shuttering required, cutting
holes in walls and making good with brick
work in cement mortar 1:4 (1cement ,4coarse
sand) plastered with cement mortar 1:3 (one
cement, 3coarse sand) on inside of the
manhole wall lead caulked joints between
sand cast iron pipes, and fittings, stiff
cement mortar 1:1(1cement 1fine sand)
joints between sand cast iron tee and S.W
pipe, making required channels complete as
per standard design and specifications
150mm dia sand cast iron drop connection

19.23.1 Extra for depths beyond 60cm of sand cast drop conne 1,897.09
iron drop connection complete for 100mm dia ction
sand cast iron drop connection.

19.23.2 Extra for depths beyond 60cm of sand cast drop conne 2,509.32
iron drop connection complete for 150mm dia ction
sand cast iron drop connection.

19.24.1 Dismantling of manhole including R.C.C top no. 926.79


slab, CI cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials
into municipal dumps within 50m lead
Rectangular manhole 90x80cm and 45cm deep.

19.24.2 Dismantling of manhole including R.C.C top no. 1,624.66


slab, CI cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials
into municipal dumps within 50m lead
Rectangular manhole 120x90cm and 90cm deep.

19.24.3 Dismantling of manhole including R.C.C top no. 3,063.32


slab, CI cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials
into municipal dumps within 50m lead
rectangular archtype manhole 140x90cm and
2.45m deep.

19.24.4 Dismantling of manhole including R.C.C top no. 1,950.68


slab, CI cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials

Puducherry Region
19. Drainage
Page No.: 415
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

into municipal dumps within 50m lead


circular manhole 122 cm diameter and 1.68
cm deep.

19.25.1 Extra for depth of manholes dismantled : metre 736.13


Rectangular manhole 90 x 80 cm and 45 cm
deep.

19.25.2 Extra for depth of manholes dismantled : metre 876.66


Rectangular manhole 120 x 90 cm and 90 cm
deep.

19.25.3 Extra for depth of manholes dismantled : metre dept 710.51


Rectangular arch type manhole 140 x 90 cm h
and 2.45 m deep (upto 4.25 m depth).

19.25.4 Extra for depth of manholes dismantled : metre dept 5,124.82


Circular manhole 122 cm diameter and 1.68 h
m deep (upto 2.29 m depth).

19.26.1 Raising manhole cover and frame slab to each 1,575.42


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid sepatately) Rectangular manhole 90x80
cm with rectangular cover 600 x 450 mm of
grade LD 2.5

19.26.2 Raising manhole cover and frame slab to no. 2,476.79


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid separately) Rectangular manhole 120x90
cm with circular cover 500 mm dia of grade
MD-10.

19.26.3 Raising manhole cover and frame slab to no. 2,305.53


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid sepatately) Rectangular manhole 120x90
cm with circular cover 560 mm dia of grade
HD-20.

19.26.4 Raising manhole cover and frame slab to manhole 209.69


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid sepatately) Circular manhole 140 cm
dia with circular cover 600 mm dia of grade
EHD-35.

Puducherry Region
19. Drainage
Page No.: 416
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

19.27.1 Constructing brick masonry road gully chamber 4,227.30


chamber 50x45x60 cm with bricks of class
designation 75 in cement mortar 1:4 (1
cement: 4 coarse sand) including 500x450 mm
precast R.C.C horizontal grating with frame
complete as per standard design with F.P.S
bricks.

19.28.1 Constructing brick masonry road gully chamber 4,619.81


chamber 45x45x77.5 cm with bricks of class
designation 75 in cement mortar 1:4 (1
cement: 4 coarse sand) with precast R.C.C
vertical grating complete as per standard
design with F.P.S bricks.

19.29.1 Constructing brick masonry road gully chamber 7,859.85


chamber 110x50x77.5 cm with bricks of class
designation 75 in cement mortar 1:4 (1
cement: 4 coarse sand) including 500x450 mm
precast R.C.C horizontal grating with frame
and vertical grating complete as per
standard design with F.P.S bricks.

19.30.1.1 Constructing brick masonry chamber for chamber 4,412.09


underground CI inspection chamber and bends
with 75 class designation bricks in cement
mortar 1:4 (1 cement: 4 coarse sand) CI
cover with frame (light duty) 455x610 mm
internal dimensions, total weight of cover
with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame
15 kg) R.C.C top slab with 1:2:4 mix (1
cement :2 coarse sand:4 graded stone
aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement: 5 fine sand: 10
graded stone aggregate 40 mm nominal size)
inside plastering 12 mm thick with cement
mortar 1:3 (1 cement: 3 coarse sand)
finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete as per standard design Inside
dimensions 450 x 610 mm and 45 cm deep for
single pipe line with F.P.S bricks.

19.30.2.1 Constructing brick masonry chamber for chamber 5,209.56


underground CI inspection chamber and bends
with 75 class designation bricks in cement
mortar 1:4 (1 cement: 4 coarse sand) CI
cover with frame (light duty) 455 x 610 mm
internal dimensions, total weight of cover
with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame

Puducherry Region
19. Drainage
Page No.: 417
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

15 kg) R.C.C top slab with 1:2:4 mix (1


cement :2 coarse sand:4 graded stone
aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement: 5 fine sand: 10
graded stone aggregate 40 mm nominal size)
inside plastering 12 mm thick with cement
mortar 1:3 (1 cement: 3 coarse sand)
finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete as per standard design Inside
dimensions 500 x 700 mm and 45 cm deep for
pipe line with one or two inlets with F.P.S
bricks.

19.30.3.1 Constructing brick masonry chamber for chamber 6,124.60


underground CI inspection chamber and bends
with 75 class designation bricks in cement
mortar 1:4 (1 cement: 4 coarse sand) CI
cover with frame (light duty) 455 x 610 mm
internal dimensions, total weight of cover
with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame
15 kg) R.C.C top slab with 1:2:4 mix (1
cement :2 coarse sand:4 graded stone
aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement : 5 fine sand :
10 graded stone aggregate 40 mm nominal
size) inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse
sand) finished smooth with a floating coat
of neat cement on walls and bed concrete
etc. complete as per standard design Inside
dimensions 600 x 850 mm and 45 cm deep for
pipe line with three or more inlets with
F.P.S bricks.

19.31.1.1 Extra for depth beyond 45 cm of brick metre 3,865.03


masonry chamber for 455 x 610 mm size with
F.P.S bricks.

19.31.2.1 Extra for depth beyond 45 cm of brick metre 4,217.01


masonry chamber for 500 x 700 mm size with
F.P.S bricks.

19.31.3.1 Extra for depth beyond 45 cm of brick metre 4,911.46


masonry chamber for 600 x 850 mm size with
F.P.S bricks.

19.32.1A Making soak pit 2.5 m diameter 3 m deep soak pit 15,755.89
with 45 x 45 cm dry brick honeycomb shaft
with bricks of class designation 75 and
110mm dia UPVC pipe (type B) 1.8 m long

Puducherry Region
19. Drainage
Page No.: 418
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

complete as per standard design with F.P.S


bricks.

19.32.1L Making soak pit 2.5 m diameter 3 m deep each 15,021.66


with 45 x 45 cm dry table moulded brick
honeycomb shaft with bricks of class
designation 35 and 110mm dia UPVC 1.8 m
long complete as per standard design with
F.P.S bricks.

19.33.1 Providing and fixing on wall /column face metre 316.23


unplasticed - PVC soil and waste pipes
(type-B) conforming to IS:13592-1992
including jointing with seal ring
conformation to IS: 5382 leaving 10mm gap
for thermal expansion - single socketed
pipes 110mm diameter

19.33.1A Providing and fixing on wall face/column each 291.84


face unplasticised - PVC moulded fittings /
accessories for unplasticisd - PVC soil and
waste pipes conforming to IS:14735 - 1999
including jointing with seal ring
conforming to IS:5382 leaving 10mm gap for
thermal expansion - Single tee with door -
110x110x110mm

19.33.1B Providing and fixing on wall face / column each 268.95


face unplasticised - PVC moulded
fittings/accessories for unplasticisd - PVC
soil and waste pipes conforming to
IS:14735-1999 including jointing with seal
ring conforming to IS:5382 leaving 10mm gap
for thermal expansion - Single tee without
door - 110x110x110mm

19.33.1C Providing and fixing on wall face/column each 164.09


face unplasticised- PVC moulde
fittings/accessories for unplasticisd - PVC
soil and waste pipes conforming to
IS:14735-1999 including jointing with seal
ring conforming to IS:5382 leaving 10mm gap
for thermal expansion - bend 110mm

19.33.1D Providing and fixing on wall face /column each 148.41


face unplasticised - PVC moulded
fittings/accessories for unplasticisd - PVC
soil and waste pipes conforming to
IS:14735-1999 including jointing with seal
ring conforming to IS : 5382 leaving 10mm
gap for thermal expansion - bend with door
110mm

Puducherry Region
19. Drainage
Page No.: 419
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

19.33.1E Providing and fixing on wall face/column each 109.59


face unplasticised - PVC moulded
fittings/accessories for unplasticisd - PVC
soil and waste pipes conforming to
IS:14735-1999 including jointing with seal
ring conforming to IS:5382 leaving 10mm gap
for thermal expansion - heel rest bend
110mm

19.33.2 Providing and fixing on wall/column face metre 78.08


unplasticised - PVC soil and waste pipes
(type B) conforming to IS:13592 - 1992
including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion - single socketed
pipes 75mm diameter

19.33.2A Providing and fixing on wall/column face each 194.41


unplasticisd - PVC moulded fittings /
accessories for unplasticisd - PVC soil and
waste pipes conforming to IS:14735 - 1999
including jointing with seal ring
conforming to IS: 5382 leaving 10mm gap for
thermal expansion - Single tee with door -
75x75x75mm

19.33.2B Providing and fixing on wall face /column each 173.91


face unplasticised - PVC moulded fittings
/accessories for unplasticisd - PVC soil
and waste pipes conforming to IS
:14735-1999 including jointing with seal
ring conforming to IS:5382 leaving 10mm gap
for thermal expansion - Single tee without
door - 75x75x75mm

19.33.2C Providing and fixing on wall face / column each 113.50


face unplasticised - PVC moulded fittings /
accessories for unplasticisd - PVC soil and
waste pipes conforming to IS:14735 - 1999
including jointing with seal ring
conforming to IS : 5382 leaving 10mm gap
for thermal expansion - bend 75mm

19.33.2E Providing and fixing on wall face / column each 76.48


face unplasticised - PVC moulded fittings /
accessories for unplasticisd - PVC soil and
waste pippes conforming to IS :14735 - 1999
including jointing with seal ring
conforming to IS:5382 leaving 10mm gap for
thermal expansion - head rest bend 75 mm

19.33.2F Providing and fixing on wall face / column each 126.59

Puducherry Region
19. Drainage
Page No.: 420
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

face unplasticised - PVC moulded fittings /


accessories for unplasticised PVC soil and
waste pipes conforming to IS:4985 including
of jointing with seal ring conforming to
IS: 5382 leaving 10mm gap for thermal
expansion - bend with door 50 mm

19.33A Constructing soak pit 1.20 x 1.20 x 1.20 m soak pit 2,079.93
filled with brick bats including 110mm dia
UPVC pipe (type B) 1.20 m long complete as
per standard design.

19.34.1 Providing and fixing SW intercepting trap no. 270.72


in manholes with stiff mixture of cement
mortar 1:1 (1 cement: 1 fine sand)
including testing of joints etc complete.
100 mm dia.

19.34.2 Providing and fixing SW intercepting trap no. 384.00


in manholes with stiff mixture of cement
mortar 1:1 (1 cement : 1 fine sand)
including testing of joints etc complete -
150 mm dia.

Puducherry Region
20. Pile Work
Page No.: 421
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

20.1.1 Providing, driving and installing driven metre 2,019.63


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
400mm dia. piles.

20.1.1.1 Providing, driving and installing driven metre 2,052.01


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
400mm dia. piles (Using cement SRPC)

20.1.2 Providing, driving and installing driven metre 2,470.66


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
450mm dia. piles.

20.1.2.1 Providing, driving and installing driven metre 2,511.68


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
450mm dia. Piles - (Using cement SRPC)

Puducherry Region
20. Pile Work
Page No.: 422
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

20.1.3 Providing, driving and installing driven metre 2,977.43


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
500mm dia. piles.

20.1.3.1 Providing, driving and installing driven metre 3,028.06


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
500mm dia. piles. (Using cement SRPC)

20.1.4 Providing, driving and installing driven metre 3,265.58


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
550mm dia. piles.

20.1.4.1 Providing, driving and installing driven metre 3,326.86


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
550mm dia. piles. (Using cement SRPC)

Puducherry Region
20. Pile Work
Page No.: 423
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

20.1.5 Providing, driving and installing driven metre 5,585.04


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
750mm dia. piles.

20.1.5.1 Providing, driving and installing driven metre 5,698.91


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
750mm dia. piles. (Using cement SRPC)

20.1.6 Providing, driving and installing driven metre 9,306.54


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1000mm dia. piles.

20.1.6.1 Providing, driving and installing driven metre 9,509.08


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1000mm dia. piles. (Using cement SRPC)

Puducherry Region
20. Pile Work
Page No.: 424
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

20.1.7 Providing, driving and installing driven metre 12,184.81


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1200mm dia. piles.

20.1.7.1 Providing, driving and installing driven metre 12,476.36


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1200mm dia. Piles (Using cement SRPC)

20.1.8 Providing, driving and installing driven metre 17,421.73


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1500mm dia. piles.

20.1.8.1 Providing, driving and installing driven metre 17,877.54


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1500mm dia. Piles (Using cement SRPC)

Puducherry Region
20. Pile Work
Page No.: 425
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

20.2.1 Boring, providing and installing bored metre 1,570.78


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 300mm
dia piles.

20.2.1.1 Boring, providing and installing bored metre 1,588.97


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 300mm
dia piles (Using cement SRPC)

20.2.2 Boring, providing and installing bored metre 1,978.69


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 400mm
dia piles.

20.2.2.1 Boring, providing and installing bored metre 2,011.07

Puducherry Region
20. Pile Work
Page No.: 426
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cast-in-situ reinforced cement concrete


pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 400mm
dia piles (Using SRPC cement)

20.2.3 Boring, providing and installing bored metre 2,580.20


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 450mm
dia piles.

20.2.3.1 Boring, providing and installing bored metre 2,621.23


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 450mm
dia piles (Using cement SRPC)

20.2.4 Boring, providing and installing bored metre 2,966.19


cast-in-situ reinforced cement concrete

Puducherry Region
20. Pile Work
Page No.: 427
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pile of specified diameter and length below


the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 500mm
dia piles.

20.2.4.1 Boring, providing and installing bored metre 3,016.83


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 500mm
dia piles (Using SRPC cement)

20.2.5 Boring, providing and installing bored metre 3,926.92


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 600mm
dia piles.

20.2.5.1 Boring, providing and installing bored metre 3,999.81


cast-in-situ reinforced cement concrete
pile of specified diameter and length below

Puducherry Region
20. Pile Work
Page No.: 428
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the pile cap M35 in cement concrete, to


carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 600mm
dia piles (Using SRPC cement)

20.2.6 Boring, providing and installing bored metre 5,684.83


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 750mm
dia piles.

20.2.6.1 Boring, providing and installing bored metre 5,798.69


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 750mm
dia piles (Using SRPC cement)

20.2.7 Boring, providing and installing bored metre 9,575.64


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to

Puducherry Region
20. Pile Work
Page No.: 429
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

carry a safe working load not less than


specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1000mm dia piles.

20.2.7.1 Boring, providing and installing bored metre 9,778.18


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1000mm dia piles (Using SRPC cement)

20.2.8 Boring, providing and installing bored metre 12,663.68


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1200mm dia piles.

20.2.8.1 Boring, providing and installing bored metre 12,955.23


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than

Puducherry Region
20. Pile Work
Page No.: 430
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

specified, excluding the cost of steel


reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1200mm dia piles (Using SRPC cement)

20.2.9 Boring, providing and installing bored metre 18,354.62


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1500mm dia piles.

20.2.9.1 Boring, providing and installing bored metre 18,810.44


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1500mm dia piles (Using SRPC cement)

20.3.1 Boring, providing and installing bored metre 2,124.72


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement

Puducherry Region
20. Pile Work
Page No.: 431
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

but including the cost of boring with,


bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 300mm dia piles.

20.3.1.1 Boring, providing and installing bored metre 2,144.79


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 300mm dia piles (Using SRPC cement)

20.3.2 Boring, providing and installing bored metre 2,677.43


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 400mm dia piles.

20.3.2.1 Boring, providing and installing bored metre 2,715.56


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 400mm dia piles (Using SRPC cement)

20.3.3 Boring, providing and installing bored metre 3,005.59


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement

Puducherry Region
20. Pile Work
Page No.: 432
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

but including the cost of boring with,


bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 450mm dia piles.

20.3.3.1 Boring, providing and installing bored metre 3,054.76


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 450mm dia piles (Using cement SRPC)

20.3.4 Boring, providing and installing bored metre 3,380.75


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 550mm dia piles.

20.3.4.1 Boring, providing and installing bored metre 3,442.68


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 550mm dia piles - Using cement SRPC

20.4.1 Extra over item No. 20.3 for providing Bulb 1,473.32
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 300mm dia
piles.

Puducherry Region
20. Pile Work
Page No.: 433
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

20.4.1.1 Extra over item No. 20.3 for providing bulb 1,481.83
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 300mm dia
piles - (Using cement SRPC)

20.4.2 Extra over item No. 20.3 for providing Bulb 1,716.88
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 400mm dia
piles.

20.4.2.1 Extra over item No. 20.3 for providing bulb 1,733.16
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 400mm dia
piles - (Using cement SRPC)

20.4.3 Extra over item No. 20.3 for providing Bulb 1,864.49
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 450mm dia
piles.

20.4.3.1 Extra over item No. 20.3 for providing bulb 1,885.40
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 450mm dia
piles - (Using cement SRPC)

20.4.4 Extra over item No. 20.3 for providing Bulb 2,082.50
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 550mm dia
piles.

20.4.4.1 Extra over item No. 20.3 for providing bulb 2,108.81
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 550mm dia
piles - (Using cement SRPC)

20.5.1 Providing, driving and installing driven metre 2,519.72


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete

Puducherry Region
20. Pile Work
Page No.: 434
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

filling including centring, shuttering,


driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 400mm dia piles.

20.5.1.1 Providing, driving and installing driven metre 2,552.61


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 400mm dia piles - (Using
cement SRPC)

20.5.2 Providing, driving and installing driven metre 3,062.57


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 450mm dia piles.

20.5.2.1 Providing, driving and installing driven metre 3,104.10


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting

Puducherry Region
20. Pile Work
Page No.: 435
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with cement sand grouting of mix 1:2 (1


cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 450mm dia piles - (Using
cement SRPC)

20.5.3 Providing, driving and installing driven metre 3,308.89


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 500mm dia piles.

20.5.3.1 Providing, driving and installing driven metre 3,360.04


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 500mm dia piles - (Using
cement SRPC)

20.5.4 Providing, driving and installing driven metre 3,769.01


Pre-cast reinforced cement concrete piles
of specified diameter and length below the

Puducherry Region
20. Pile Work
Page No.: 436
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pile cap in M35 cement concrete to carry


safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 550mm dia piles.

20.5.4.1 Providing, driving and installing driven metre 3,830.80


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 550mm dia piles - (Using
cement SRPC)

20.5.5 Providing, driving and installing driven metre 7,187.81


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 750mm dia piles.

Puducherry Region
20. Pile Work
Page No.: 437
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

20.5.5.1 Providing, driving and installing driven metre 7,328.68


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 750mm dia piles - (Using
cement SRPC)

20.5.6 Providing, driving and installing driven metre 9,876.01


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 1000mm dia piles.

20.5.6.1 Providing, driving and installing driven metre 10,079.06


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be

Puducherry Region
20. Pile Work
Page No.: 438
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

measured from top of the shoe to the bottom


of pile cap). 1000mm dia piles - (Using
cement SRPC)

20.9.1 Vertical load testing of piles in MT 928.35


accordance with IS:2911(Part IV) including
installation of loading platform and
preparation of pile head or construction of
test cap and dismantaling of test cap after
test etc. complete as per specification and
the direction of Engineer in charge -
routine test - in all capacity pile

20.9.2 Conducting standard penetration test as per test 2,224.40


IS 2131 - 1981 using split spoon sampler
and drive weight assembly at required depth
in all type of soil including hire charges
for machinery and labour etc., all complete
- upto 10 metre

20.9.3 Conducting standard penetration test as per test 3,122.61


IS 2131 - 1981 using split spoon sampler
and drive weight assembly at required depth
in all type of soil including hire charges
for machinery and labour etc., all complete
- upto 10 to 20 metre

20.9.4 Conducting standard penetration test as per test 3,809.81


IS 2131 - 1981 using split spoon sampler
and drive weight assembly at required depth
in all type of soil including hire charges
for machinery and labour etc., all complete
- upto 20 to 30 metre

Puducherry Region
21. Aluminium Work
Page No.: 439
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

21.1.1.1 Providing and fixing aluminimum work for Kg 604.89


doors, windows, ventilators and partitions
with extruded built up standard tubular
sections / appropriate Z sections and other
sections of approved make conforming to IS
: 733 and IS : 1285, fixed with rawl plugs
and screws or with fixing clips, or with
expansion hold fasteners including
necessary filling up of gaps at junctions,
at top, bottom and sides with required PVC
/ neoprene felt etc. Aluminimum sections
shall be smooth, rust free, straight,
mitred and jointed mechanically wherever
required including cleat angle, Aluminimum
snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all
complete as per architectural drawings.
(Glazing and panelling to be paid for
separately) : For fixed portion. Anodised
aluminimum (anodised transparent
or dyed to required shade according to IS :
1868, Minimum anodic coating of grade AC
15)

21.1.1.2 Providing and fixing aluminimum work for Kg 612.48


doors, windows, ventilators and partitions
with extruded built up standard tubular
sections / appropriate Z sections and other
sections of approved make conforming to IS
: 733 and IS : 1285, fixed with rawl plugs
and screws or with fixing clips, or with
expansion hold fasteners including
necessary filling up of gaps at junctions,
at top, bottom and sides with required PVC
/ neoprene felt etc. Aluminimum sections
shall be smooth, rust free, straight,
mitred and jointed mechanically wherever
required including cleat angle, Aluminimum
snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all
complete as per architectural drawings.
(Glazing and panelling to be paid for
separately) : For fixed portion. Powder
coated aluminium (minimum thickness of
powder coating 50 micron)

21.1.1.3 Providing and fixing aluminimum work for Kg 621.34


doors, windows, ventilators and partitions
with extruded built up standard tubular
sections / appropriate Z sections and other
sections of approved make conforming to IS
: 733 and IS : 1285, fixed with rawl plugs

Puducherry Region
21. Aluminium Work
Page No.: 440
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and screws or with fixing clips, or with


expansion hold fasteners including
necessary filling up of gaps at junctions,
at top, bottom and sides with required PVC
/ neoprene felt etc. Aluminimum sections
shall be smooth, rust free, straight,
mitred and jointed mechanically wherever
required including cleat angle, Aluminimum
snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all
complete as per architectural drawings.
(Glazing and panelling to be paid for
separately) : For fixed portion. Polyester
powder coated aluminimum (minimum thickness
of polyester powder coating 50 micron)

21.1.2.1 Providing and fixing aluminimum work for Kg 638.29


doors, windows, ventilators and partitions
with extruded built up standard tubular
sections / appropriate Z sections and other
sections of approved make conforming to IS
: 733 and IS : 1285, fixed with rawl plugs
and screws or with fixing clips, or with
expansion hold fasteners including
necessary filling up of gaps at junctions,
at top, bottom and sides with required PVC
/ neoprene felt etc. Aluminimum sections
shall be smooth, rust free, straight,
mitred and jointed mechanically wherever
required including cleat angle, Aluminimum
snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all
complete as per architectural drawings.
(Glazing and panelling to be paid for
separately) : For shutters of doors,
windows and ventilators including providing
and fixing hinges / pivots and making
provision for fixing of fittings wherever
required including the cost of PVC /
neoprene gasket required (fittings shall be
paid for separately) Anodised aluminimum
(anodised transparent or dyed to required
shade according to IS : 1868, minimum
anodic coating of grade AC15).

21.1.2.2 Providing and fixing aluminimum work for Kg 646.04


doors, windows, ventilators and partitions
with extruded built up standard tubular
sections / appropriate Z sections and other
sections of approved make conforming to IS
: 733 and IS : 1285, fixed with rawl plugs
and screws or with fixing clips, or with

Puducherry Region
21. Aluminium Work
Page No.: 441
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

expansion hold fasteners including


necessary filling up of gaps at junctions,
at top, bottom and sides with required PVC
/ neoprene felt etc. Aluminimum sections
shall be smooth, rust free, straight,
mitred and jointed mechanically wherever
required including cleat angle, Aluminimum
snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all
complete as per architectural drawings.
(Glazing and panelling to be paid for
separately) : For shutters of doors,
windows and ventilators including providing
and fixing hinges / pivots and making
provision for fixing of fittings wherever
required including the cost of PVC /
neoprene gasket required (fittings shall be
paid for separately) Powder coated
aluminium (minimum thickness of powder
coating 50 micron)

21.1.2.3 Providing and fixing aluminimum work for kg 655.08


doors, windows, ventilators and partitions
with extruded built up standard tubular
sections / appropriate Z sections and other
sections of approved make conforming to IS
: 733 and IS : 1285, fixed with rawl plugs
and screws or with fixing clips, or with
expansion hold fasteners including
necessary filling up of gaps at junctions,
at top, bottom and sides with required PVC
/ neoprene felt etc. Aluminimum sections
shall be smooth, rust free, straight,
mitred and jointed mechanically wherever
required including cleat angle, Aluminimum
snap beading for glazing / panelling, C.P.
brass / stainless steel screws, all
complete as per architectural drawings.
(Glazing and panelling to be paid for
separately) : For shutters of doors,
windows and ventilators including providing
and fixing hinges / pivots and making
provision for fixing of fittings wherever
required including the cost of PVC /
neoprene gasket required (fittings shall be
paid for separately) polyster powder coated
aluminium (minimum thickness of polyster
powder coating 50 micron)

21.2.1 Providing and fixing 9mm thick prelaminated Sqm 576.17


particle board flat pressed three layer or
graded wood particle board conforming to IS

Puducherry Region
21. Aluminium Work
Page No.: 442
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

: 12823 grade 1 type II in panneling fixed


in aluminimum doors, windows, shutters and
partition frames with C.P. brass /
stainless steel screws etc., complete as
per architectural drawings. Prelaminated
particle board with decorative lamination
on one side and balancing lamination on
other side.

21.2.2 Providing and fixing 9mm thick prelaminated Sqm 634.40


particle board flat pressed three layer or
graded wood particle board conforming to IS
: 12823 grade 1 type II in panneling fixed
in aluminimum doors, windows, shutters and
partition frames with C.P. brass /
stainless steel screws etc., complete as
per architectural drawings. Prelaminated
particle board with decorative lamination
on both sides.

21.3.1 Providing and fixing glazing in aluminimum Sqm 917.69


door, window, ventilator shutters and
partitions etc., with PVC / neoprene gasket
etc., complete as per the architectural
drawings. (cost of aluminimum snap beading
shall be paid in basic item) : With float
glass panes of 4.0mm thickness.

21.3.2 Providing and fixing glazing in aluminimum Sqm 1,037.03


door, window, ventilator shutters and
partitions etc., with PVC / neoprene gasket
etc., complete as per the architectural
drawings. (cost of aluminimum snap beading
shall be paid in basic item) : With float
glass panes of 5mm thickness.

21.3.3 Providing and fixing glazing in aluminimum Sqm 1,163.04


door, window, ventilator shutters and
partitions etc., with PVC / neoprene gasket
etc., complete as per the architectural
drawings. (cost of aluminimum snap beading
shall be paid in basic item) : With float
glass panes of 6.0mm thickness.

21.4.1 Providing and fixing double action Each 4,214.88


hydraulic floor spring of approved brand
and manufacture IS : 6315 marked, for doors
including cost cutting floors as required,
embedding in floors and cover plate with
brass pivot and single piece M.S. sheet
outer box with slide plate etc., complete.
With stainless steel cover plate.

Puducherry Region
21. Aluminium Work
Page No.: 443
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

21.5 Providing and fixing powder coated Kg 618.72


aluminimum work (minimum thickness of
powder coating 50micron) consisting of Tee
/ angle sections of approved make
conforming to IS : 733 in frames of false
ceiling including aluminimum angle cleats
with necessary C.P. brass / stainless steel
sunk screws, aluminimum perimeter angle
fixed to wall with rawl plugs @ 450mm
centre to centre and fixing the frame work
to G.I . level adjusting hangers 6mm dia.
with necessary cadmium plated machine
screws all complete as per approved
architectural drawings (level adjusting
angers, ceiling cliets and expansion hold
fasteners to be paid for separately).

21.6 Providing and fixing 6mm dia G.I. level Each 178.93
adjusting hangers (upto 1200mm length)
fixed to roof slabs by means of ceiling
cleats made out of G.I. flat 40X3mm size
60mm long and expansion hold fasteners
12.5mm dia. 40mm long complete .

21.7.1 Providing and fixing machine moulded Kg 555.83


aluminimum covering of approved pattern and
design made out of machine cut aluminimum
sheet and machine hold for receiving
screws, over expansion joints on vertical
surfaces / ceilings with full threaded,
cadmium plated steel screws 4mm dia. Stem,
30mm long and aluminimum washers 2mm thick,
15mm dia. At a staggered pitch of 200mm
centre to centre including drilling holes
in the receiving surface and providing
expandable plastic sleeves in holes etc.,
complete. Anodised aluminimum sheet 2.5mm
thick (anodised transparent or dyed to
required shade according to IS : 1868
minimum anodic coating of grade AC15).

21.7.2 Providing and fixing machine moulded Kg 563.42


aluminimum covering of approved pattern and
design made out of machine cut aluminimum
sheet and machine hold for receiving
screws, over expansion joints on vertical
surfaces / ceilings with full threaded,
cadmium plated steel screws 4mm dia. Stem,
30mm long and aluminimum washers 2mm thick,
15mm dia. At a staggered pitch of 200mm
centre to centre including drilling holes
in the receiving surface and providing

Puducherry Region
21. Aluminium Work
Page No.: 444
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

expandable plastic sleeves in holes etc.,


complete. Powder coated aluminimum sheet
2.5mm thick (minimum thickness of powder
coating 50micron) .

21.8.1 Filling the gap in between aluminimum frame metre 89.29


& adjacent R.C.C. / brick / stone work by
providing weather silicon sealant over
backer rod of approved quality as per
architectural drawing complete. Upto 5mm
depth and 5mm width.

21.9.1 Extra for applying additional anodic Kg 7.23


coating AC 25 instead of AC 15 to aluminium
extruded and sections. For fixed portion

21.9.2 Extra for applying additional anodic Kg 7.23


coating AC 25 instead of AC 15 to aluminium
extruded and sections. For shutters of
doors, windows & ventilators

21.10 Providing and fixing double glazed Sqm 3,446.63


hermetically sealed glazing in aluminium
windows, ventilators and partition etc.
with 6mm thick clear float glass both side
having 12mm air gap including providing
EPDM gasket, perforated aluminium spacers,
desiccants, silicon sealant (both primary
and secondary sealant) etc. as per
specificatrions, drawings complete.

21.11.1 Providing and fixing stainless steel (SS - Each 207.49


304 grade) adjustable friction windows
stays of approved quality with necessary
stainless steel screws etc. to the side
hung windows complete. 205 x 19mm

21.11.2 Providing and fixing stainless steel (SS - Each 227.99


304 grade) adjustable friction windows
stays of approved quality with necessary
stainless steel screws etc. to the side
hung windows complete. 255 x 19mm

21.11.3 Providing and fixing stainless steel (SS - Each 290.68


304 grade) adjustable friction windows
stays of approved quality with necessary
stainless steel screws etc. to the side
hung windows complete. 355 x 19mm

21.11.4 Providing and fixing stainless steel (SS - Each 531.81


304 grade) adjustable friction windows
stays of approved quality with necessary

Puducherry Region
21. Aluminium Work
Page No.: 445
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

stainless steel screws etc. to the side


hung windows complete. 510 x 19mm

21.11.5 Providing and fixing stainless steel (SS - Each 962.22


304 grade) adjustable friction windows
stays of approved quality with necessary
stainless steel screws etc. to the side
hung windows complete. 710 x 19mm

21.12.1 Providing and fixing aluminium tubular No 697.36


handle bar 32mm outer dia 3.00mm thick &
2100mm long with SS screws etc complete.
Anodised (AC 15) aluminium tubular handle
bar.

21.12.2 Providing and fixing aluminium tubular No 709.18


handle bar 32mm outer dia 3.00mm thick &
2100mm long with SS screws etc complete.
Powder coated minimum thickness 50 micron
aluminium tubular handle bar

21.12.3 Providing and fixing aluminium tubular No 722.97


handle bar 32mm outer dia 3.00mm thick &
2100mm long with SS screws etc complete.
Polyester powder coated minimum thickness
50 micron aluminium tubular handle bar

21.13 Providing and fixing 100mm X 35 mm brass No 905.87


locks (best make of approved quality) for
aluminium doors including necessary cutting
and making good etc. complete.

21.14 Providing and fixing anodised (anodised Kg 491.65


transparent or dyed to required shade
according to IS: 1868. minimum anodic
coating of grade AC 15) sub frame work for
windows and ventilators with extruded built
up standard tubular sections of approved
make conforming to IS: 733 and IS: 1285
fixed with rawl plugs and stainless steel
screws etc.

21.15.1 Providing and fixing aluminium casement No 71.25


windws fastener of required length for
aluminium windows with necessary screws
etc. complete. Anodised (AC 15) aluminium.

21.15.2 Providing and fixing aluminium casement No 57.99


windws fastener of required length for
aluminium windows with necessary screws
etc. complete. Powder coated minimum
thickness 50 micron aluminium.

Puducherry Region
21. Aluminium Work
Page No.: 446
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

21.15.3 Providing and fixing aluminium casement No 65.23


windows fastener of required length for
aluminium windows with necessary screws
etc. complete. Polyester powder coated
minimum thickness 50 micron aluminium.

21.16.1 Providing and fixing aluminium round shape No 57.99


handle of outer dia 100mm with SS screws
etc. complete. Anodised (AC 15) aluminium

21.16.2 Providing and fixing aluminium round shape No 60.40


handle of outer dia 100mm with SS screws
etc. complete. Powder coated minimum
thickness 50 micron aluminium

21.16.3 Providing and fixing aluminium round shape No 65.23


handle of outer dia 100mm with SS screws
etc. complete. Polyester powder coated
minimum thickness 50 micron aluminium

21.17.1 Providing and fixing PVC switch lock of no 120.56


100mm length for aluminium sliding windows

21.17.2 Providing and fixing aluminium handle with no 168.79


lock of 75mm dia with necessary screws

21.17.3 Providing and fixing Anodised aluminium , kg 861.60


minimum anodic coating of grade AC 15 grill
of required pattern / design over the
doors, windows and ventilators., etc,
including fixing (but excluding the cost of
the sections, which will be paid
separately)

21.17.4 Providing and fixing Anodised aluminium kg 529.96


sections of AC grade 15 for fixing the
grills for the doors / windows /
ventilators etc., with necessary CP brass
screws

Puducherry Region
22. Water Proofing
Page No.: 447
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

22.1.1 Providing and laying intergral cement based Sqm 1,356.85


treatment for water proofing on horizontal
surface at all depth below ground level for
under ground structures and consisting of
: (i) 1st layer of 22mm to 25mm thick
approved and specified rough stone slab
over a 25mm thick base of cement mortar 1:3
(1 cement : 3 coarse sand) mixed with water
proofing compound conforming to IS : 2645
in the recommended proportion over the
levelling course (levelling course to be
paid separately) joints sealed and grouted
with cement slurry mixed with water
proofing compound. (ii) 2nd layer of 25mm
thick cement mortar 1:3 (1 cement : 3
coarse sand) mixed with water proofing
compound in recommended proportions. (iii)
Finishing top with stone aggregate of 10mm
to 12mm nominal size spreading @ 8 cudm /
sqm thoroughly embedded in the 2nd layer.
Using rough kota stone.

22.2.1 Providing and laying intergral cement based Sqm 1,603.47


treatment for water proofing on the
vertical surface by fixing specified stone
slab 22mm to 25mm thick with cement slurry
with water proofing compound conforming to
IS : 2645 in recommended propotions with a
gap of 20mm (minimum) between stone slab
and the receiving surfaces and filling the
gap with neat cement slurry mixed with
water proofing compound and finishing the
exterior of stone slab with cement mortar
1:3 (1 cement : 3 coarse sand) 20mm thick
neat cement punning mixed with water
proofing compound in recommended
proportions complete at all levels. Using
rough kota stone.

22.3 Providing and laying water proofing Sqm 608.95


treatment to vertical and horizontal
surfaces of depressed portions of W.C.,
kitchen and the like consisting of :
(i) 1st course of applying cement slurry @
4.4Kg/sqm. mixed with water proofing
compound conforming to IS : 2645 in
recommended proportions including rounding
off junction of vertical and horizontal
surface.
(ii) IInd course of 20mm cement plaster 1:3
(1cement : 3 coarse sand) mixed with water
proofing compound in recommended proportion

Puducherry Region
22. Water Proofing
Page No.: 448
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including rounding off junction of vertical


and horizontal surface.
(iii) IIIrd course of applying blown or
residual bitumen applied hot at 1.7 kg/
sqm. of area.
(iv) IVth course of 400 micron thick PVC
sheet. (overlaps at joints of PVC sheet
should be 100mm wide and pasted to each
other with bitumen @ 1.7 Kg / sqm.)

22.4.1 Providing and placing in position suitable metre 436.27


PVC water stops conforming to IS : 12200
for construction / expansion joints between
two RCC members and fixed to the
reinforcement with binding wire before
pouring concrete etc. complete : Serrated
with central bulb (225mm wide, 8-11 mm
thick).

22.4.2 Providing and placing in position suitable metre 406.13


PVC water stops conforming to IS : 12200
for construction / expansion joints between
two RCC members and fixed to the
reinforcement with binding wire before
pouring concrete etc. complete : Dumb bell
with cental bulb (180mm wide, 8mm thick).

22.4.3 Providing and placing in position suitable metre 737.68


PVC water stops conforming to IS : 12200
for construction / expansion joints between
two RCC members and fixed to the
reinforcement with binding wire before
pouring concrete etc. complete : Kickers
(320mm wide, 5mm thick).

22.5 Providing and laying water proofing Sqm 298.26


treatment in sunken portion of WCs,
bathroom etc., by applying cement slurry
mixed with water proofing cement compound
consisting of applying :
(a) First layer of slurry of cement @ 0.488
kg / sqm. mixed with water proofing cement
compound @ 0.253 kg / sqm. This layer will
be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @
0.242 Kg / sqm mixed with water proofing
cement compound @ 0.126 kg / sqm. This
layer will be allowed to air cure for 4
hours followed with water curing for 48
hours. The rate includes preparation of
surface, treatment and sealing of all
joints, corners, juncions of pipes and

Puducherry Region
22. Water Proofing
Page No.: 449
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

masonary with polymer mixed slurry.

22.6 Providing and laying water proofing Sqm 388.96


treatment on roofs of slabs by applying
cement slurry mixed with water proofing
cement compound consisting of applying :
(a) after surface preparation, first layer
of slurry of cement @ 0.488 kg/ sqm mixed
with water proofing cement compound @ 0.253
kg / sqm.
(b) laying second layer of Fibre glass
cloth when the first layer is still green.
Overlaps of joints of fibre cloth should
not be less than 10cm.
(c) third layer of 1.5mm thickness
consisting of slurry of cement @ 1.289 kg /
sqm mixed with water proofing cement
compound @ 0.670 kg /sqm and coarse sand @
1.289 kg / sqm. This will be allowed to air
cure for 4 hours followed by water curing
for 48 hours. The entire treatment will be
taken upto 30cm on parapet wall and tucked
into groove in parapet all around.
(d) fourth and final layer of brick tiling
with cement mortar (which will be paid for
separately) for the purpose of measurement
the entire treated surface will be
measured.

22.7.1 Providing and laying integral cement based Sqm 976.85


water proofing treatment including
preparation of surface as required for
treatment of roofs, balconies, terraces etc
consisting of following operations :
(a) Applying a slurry coat of neat cement
using 2.75 kg / sqm. of cement admixed with
water proofing compound conforming to IS :
2645 and approved over the RCC slab
including adjoining walls upto 300mm height
including cleaning the surface before
treatment.
(b) Laying brick bats with mortar using
broken bricks / brick bats 25mm to 115mm
size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water
proofing compound conforming to IS : 2645
and approved over 20mm thick layer of
cement mortar of mix 1:5 (1 cement : 5
coarse sand) admixed with water proofing
compound conforming to IS : 2645 and
approved to required slope and treating
similarly the adjoining walls upto 300mm

Puducherry Region
22. Water Proofing
Page No.: 450
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

height including rounding of junctions of


walls and slabs.
(c) After two days of proper curing
applying a second coat of cement slurry
using 2.75 kg / sqm. of cement admixed with
water proofing compound conforming to IS :
2645 and approved .
(d) Finishing the surface with 20mm thick
jointless cement mortar of mix 1:4 (1
cement : 4 coarse sand) admixed with water
proofing compound conforming to IS : 2645
and approved inclulding laying glass fibre
cloth of approved quality in top layer of
plaster and finally finishing the surface
with trowel with neat cment slurry and
making pattern of 300x300mm square 3mm
deep.
(e) The whole terrace so finished shall be
flooded with water for a minimum period of
two weeks for curing and for final test.
All above operations to be done in order
and as directed and specified by the
Engineer-in-charge : With average thickness
of 120mm and minimum thickness at khurra
as 65mm.

22.8.1 Providing and laying four coursesof water Sqm 337.42


proofing treatment with bitumen felt over
roofs consisting of first and third courses
of blown bitumen 85 / 25 or 90 / 15
conforming to IS : 702 applied hot @ 1.45
kg / sqm of area for each course, second
course of roofing felt type 3 grade-1
(Hessian based self finished bitumen felt)
and fourth and final course of stone grit
6mm and down size or pea-sized gravel
spread at 6 cubic desimeter per sqm.
Including preparation of surface but
excluding grading complete with : Bitument
felt (Hessian base) type-3 grade-1
conforming to IS : 1322.

22.9 Providing and laying six courses water Sqm 514.39


proofing treatment with bitumen felt over
roofs consisting of first, third and fifth
courses of blown bitumen 85 / 25 or 90 / 15
conforming to IS : 702 applied hot @ 1.45,
1.20 and 1.45 kg / sqm of area
respectievely, second and fourth courses of
roofing felt type-3 grade-1 conforming to
IS : 1322 (Hessian based self finished
bitumen felt)conforming to IS 1322 and

Puducherry Region
22. Water Proofing
Page No.: 451
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sixth and final course of stone grit 6mm


and down size or pea-sized gravel spread at
6 cubic desimeter per sqm. Including
preparation of surface but excluding
grading complete.

22.10 Providing and laying six courses water Sqm 571.44


proofing treatment with bitumen felt over
roofs consisting of first, third and fifth
courses of blown or / and residual bitumen
applied hot @ 1.45, 1.20 and 1.70 kg /
sqm of area respectievely, second and
fourth courses of roofing felt type-2
grade-1 (firbre based self finished bitumen
felt) sixth and final courses of stone
grit 6mm and down size or pea-sized gravel
spread at 6 cubic desimeter per sqm.
Including preparation of surface but
excluding grading complete.

22.11 Providing and laying six courses water Sqm 571.44


proofing treatment with bitumen felt over
roofs consisting of first, third and fifth
courses of blown or / and residual bitumen
applied hot @ 1.45, 1.20 and 1.70 kg /
sqm of area respectievely, second and
fourth courses of roofing felt type-2
grade-2 (glass firbre based self finished
bitumen felt) sixth and final courses of
stone grit 6mm and down size or pea-sized
gravel spread at 6 cubic desimeter per sqm.
Including preparation of surface but
excluding grading complete.

22.12 Supplying and applying bituminous solution Sqm 31.74


primer on roof and or wall surface at 0.24
litre per sqm.

22.13.1 Deduct for omitting in water proofing Sqm 11.04


treatment final course of spreading stone
grit 6mm or down size or pea size gravel :
At 6 cudm per sqm.

22.13.2 Deduct for omitting in water proofing Sqm 13.86


treatment final course of spreading stone
grit 6mm or down size or pea size gravel :
At 8 cudm per sqm.

22.14.1 Grading roof for water proofing treatment Cum 5,642.04


with. Cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm
nominal size) .

Puducherry Region
22. Water Proofing
Page No.: 452
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

22.14.2 Grading roof for water proofing treatment Cum 9,599.32


with. Cement mortar 1:3 (1 cement : 3
coarse sand) .

22.14.3 Grading roof for water proofing treatment Cum 8,531.60


with. Cement mortar 1:4 (1 cement : 4
coarse sand) .

22.15 Providing laying in situ seven course water Sqm 477.22


proofing treatment with APP(Atactic
poly-propylene) modified polymeric membrane
over roof consisting of first coat of
bitumen primer @ 0.40Kg per sqm, 2nd, 4th &
6th courses of bonding material @
1.20Kg/sqm, which shall consist of blown
type bitumen of grade 85/25 conforming to
IS:702, 3rd and 5th layers of roofing
membrane APP modified Polymeric membrane
1.5mm thick of 2.25 Kg/sqm weight
consisting of five layers prefabricated
with centre core as 20micron HMHDPE film
sandwitched on both sides with polymeric
mix and the polymeric mix is protected on
both side with 20micron HMHDPE film. 7th,
the top most layer shall be finished with
brick tiles of class designation 100
grouted with cement mortar 1:3 (1 cement :
3 fine sand) mixed with 2% integral water
proofing compound by weight of cenment
over a 12mm layer of cement mortar 1:3 (1
cement : 3 fine sand) and finished neat
which shall be paid for separately as per
item No. 12.19

22.16 Providing laying in situ fivecourse water Sqm 363.06


proofing treatment with APP(Atactic
poly-propylene) modified polymeric membrane
over roof consisting of first coat of
bitumen primer @ 0.40Kg per sqm, 2nd & 4th
courses of bonding material @ 1.20Kg/sqm,
which shall consist of blown type bitumen
of grade 85/25 conforming to IS:702, 3rd
layers of roofing membrane APP modified
Polymeric membrane 2.0mm thick of 3.0
Kg/sqm weight consisting of five layers
prefabricated with centre core as 100micron
HMHDPE film sandwitched on both sides with
polymeric mix and the polymeric mix is
protected on both side with 20micron HMHDPE
film. 5th, the top most layer shall be
finished with brick tiles of class
designation 100 grouted with cement mortar

Puducherry Region
22. Water Proofing
Page No.: 453
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

1:3 (1 cement : 3 fine sand) mixed with 2%


integral water proofing compound by weight
of cenment over a 12mm layer of cement
mortar 1:3 (1 cement : 3 fine sand) and
finished neat which shall be paid for
separately as per DSR item No. 12.19

22.17 Providing laying in situ seven course water Sqm 579.34


proofing treatment with APP(Atactic
poly-propylene) modified polymeric membrane
over roof consisting of first coat of
bitumen primer @ 0.40Kg per sqm, 2nd, 4th
& 6th courses of bonding material @
1.20Kg/sqm, which shall consist of blown
type bitumen of grade 85/25 conforming to
IS:702, 3rd & 5th layers of roofing
membrane APP modified Polymeric membrane
2.0mm thick of 3.00 Kg/sqm weight
consisting of five layers prefabricated
with centre core as 100micron HMHDPE film
sandwitched on both sides with polymeric
mix and the polymeric mix is protected on
both side with 20micron HMHDPE film. 7th,
the top most layer shall be finished with
brick tiles of class designation 100
grouted with cement mortar 1:3 (1 cement :
3 fine sand) mixed with 2% integral water
proofing compound by weight of cement over
a 12mm layer of cement mortar 1:3 (1
cement : 3 fine sand) and finished neat
which shall be paid for separately as per
DSR item No. 12.19

22.18.1 Providing and fixing APP(Atactic Sqm 337.52


Polypropylene Polymer) modified
prefabricated five layer 2mm thick water
proofing membrane, black finished
reinforced with glass fibre matt consisting
of a coat of bitumen primer for bitumen
membrane @ .40 ltr/ sq. mt. by the same
membrane manufacturer of density at 25øC,
0.87 - 0.89 Kg/ltr and viscosity 70 - 160
cps. Over the primer coat the layer of
membrane shall be laid using Butane torch
and sealing all joints etc; and preparing
the surface complete. The vital physical
and chemical parameters of the membrane
shall be as under: joint strength in
longitudinal and transeverse direction at
23øC as 350/300 N/5cm. Tear strength in
longitudinal and transverse direction as
60/80N. Softening point of membrane not

Puducherry Region
22. Water Proofing
Page No.: 454
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

less than 150øC. Cold flexibility shall be


upto -2øC when tested in accordance with
ASTM, D - 5147. The laying of membrane
shall be got done through the authorised
applicator of the manufacturer of membrane.
2mm (for corrugated roof sheets)

22.19.1 Providing and layting APP (Atactic sqm 394.53


polypropylene polymer) modified
prefabricated five layer, 3mm thick water
proofing membrane, black finished
reinforced with glass fibre matt consisting
of a coat of bitumen primer for bitumen
membrane @ 0.40 ltr / sqm.by the same
membrane manufacurer of density at 25øC,
0.87 -0.89 kg /ltr and viscosity 70 - 160
cps. Over the primer coat the layer of
membrane shall be laid using butane torch
and sealing all joints etc., and preparing
the surface complete. The vital physical
and chemical parameters of the membrane
shall be as under: Joint strength in
longitudinal and transverse direction at
23øC as 350/300 N/5cm. Tear strengh in
longitudinal and transverse direction as
60/80N. Softening point of membrane not
less than 150øC. Cold flexibility shall be
upto - 2øC when tested in accordance with
ASTM, D - 5147 . The laying membrane shall
be got done through the authorised
applicator of the manufacturer of membrane:
- 3mm thick

22.20.1 Providing and laying APP (Atactic sqm 447.05


polypropylene polymer) modified
prefabricated five layer, 3mm thick water
proofing membrane, black finished
reinforced with non woven polyster matt
consisting of a coat of bitumen primer for
bitumen membrane @ 0.40 ltr / sqm.by the
same membrane manufacurer of density at
25øC, 0.87 -0.89 kg /ltr and viscosity 70 -
160 cps. Over the primer coat the layer of
membrane shall be laid using butane torch
and sealing all joints etc., and preparing
the surface complete. The vital physical
and chemical parameters of the membrane
shall be as under: Joint strength in
longitudinal and transverse direction at
23øC as 650/450 N/5cm. Tear strengh in
longitudinal and transverse direction as
300/250N. Softening point of membrane not

Puducherry Region
22. Water Proofing
Page No.: 455
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

less than 150øC. Cold flexibility shall be


upto - 2øC when tested in accordance with
ASTM, D - 5147 . The laying membrane shall
be got done through the authorised
applicator of the manufacturer of membrane:
- 3mm thick

22.21 Extra for covering top of membrane with sqm 51.09


geotextile , 120gsm non woven , 100%
polyster of thickness 1 to 1.25mm bonded to
the membrane with intermitant torch by
heating the membrame by Butane Torch as per
manufacures recommendation (for item
No.25.18 to 25.20)

Puducherry Region
23. Horticulture and Landscaping
Page No.: 456
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

23.1 Trenching in ordinary soil upto a depth of cum 40.63


60 cm including removal and stacking of
serviceable materials and then disposing of
by spreading and neatly levelling with in a
lead of 50m and making up the trenched area
to proper levels by filling with earth or
earth mixed with sludge or / and manure
before and after flooding trench with water
(excluding cost of imported earth , sludge
or manure)

23.3 supplying and stacking sludge at site cum 36.17


including royalty and carriage upto 1 km
(sludge measured in stacks will be reduced
by 8% for payment).

23.4.1 supplying and stacking at site dump manure cum 36.62


from badli or other approved source,
including carriage upto 1 km manure
measured in stacks will be reduced by 8%
for payment): screened
through seive of i.s. designetion 20mm

23.4.2 supplying and stacking at site dump manure cum 55.92


from badli or other approved source,
including carriage upto 1 km manure
measured in stacks will be reduced by 8%
for payment): screened through I.S.
designation 16 mm

23.4.3 supplying and stacking at site dump manure cum 71.35


from badli or other approved source,
including carriage upto (manure measured in
stacks will be reduced by 8% for payment):
screened through sieve of i.s. designation
4.75 mm

23.5 Rough dressing the trenched ground sq.m 0.80


including breaking clods

23.6 Uprooting weeds from the trenched area sqm 2.52


after 10 to 15 days of its flooding with
water including disposal of uprooted
vegetation.

23.7 Fine dressing the ground. sqm 1.96

23.8 Spreading of sludge, dump manure or/and sqm 0.28


good earth in required thickness (cost of
sludge, dump manure or /and good earth to
be paid separately).

Puducherry Region
23. Horticulture and Landscaping
Page No.: 457
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

23.9 Mixing earth and sludge or manure in sqm 1.87


proportion specified or directed.

23.10.1 Grassing with 'doob' grass including sqm 2.83


watering and maintenance of the lawn for 30
days or more till the grass forms a thick
lawn free from weeds and fit for mowing
including supplying good earth if
needed(the good earth shall be paid for
separately). In rows 15 cm apart in either
direction.

23.10.2 Grassing with 'doob' grass including sqm 4.91


watering and maintenance of the lawn for 30
days or more till the grass forms a thick
lawn free from weeds and fit for mowing
including supplying good earth if needed
(the good earth shall be paid for
separately). In rows of 7.5 cm apart in
either direction.

23.10.3 Grassing with 'doob' grass including sqm 6.85


watering and maintenance of the lawn for 30
days or more till the grass forms a thick
lawn free from weeds and fit for mowing
including supplying good earth if needed
(the good earth shall be paid for
separately). In rows of 5 cm apart in
either direction.

23.11 Removing of lawns including weeding, sqm 28.56


cheeling the grass, forking the ground, top
dressing with sludge or manure, mixing the
same with forked soil, watering and
maintaining the lawn for 30 days or more
till the grass forms a thick lawn free from
weeds and fit for mowing and disposal of
rubbish as directed, including supplying
goood earth if needed but excluding the
cost of sludge or manure (the good earth
shall be paid for separately).

23.12 Uprooting rank vegetation and weeds by sqm 31.65


digging the area to a depth of 60 cm
removing all weeds and other growth with
roots by forking repeatedly, breaking
clods, rough dressing, flooding with water,
uprooting fresh growths after 10 to 15 days
and then fine dressing for planting new
grass, including disposal of all rubbish
with all leads and lifts.

Puducherry Region
23. Horticulture and Landscaping
Page No.: 458
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

23.13 Preparation of beds for hedging and cum 11.47


shrubbery by excavating 60cm deep and
trenching the excavated base to a further
depth of 30cm, refilling the excavated
earth after breaking clods and mixing with
sludge or manure in the ratio 8:1 (8 parts
of stacked volume of earth after reduction
by 20% : one part of stacked volume of
sludge or manure after reduction by 8%),
flooding with water,filling with earth if
necessary, watering and finally fine
dressing, levelling etc.including stacking
and disposal of materials declared
unserviceable and surplus earth by
spreading and levelling as directed, within
a lead of 50m lift upto 1.5m complete (cost
of sludge,manure or extra earth to be paid
for separately).

23.14.1 Digging holes in ordinary soil and each 319.32


refilling the same with the excavated earth
mixed with manure or sludge in the ratio of
2:1 by volume (2 parts of stacked volume of
earth after reduction by 20% :1 part of
stacked volume of manure after reduction by
8%) flooding with water,dressing including
removal of rubbish and surplus earth, if
any with all leads and lifts (cost of
manure, sludge or extra good earth if
needed to be paid for separately);-Holes
1.2m dia and 1.2m deep

23.14.2 Digging holes in ordinary soil and each 41.59


refilling the same with the excavated earth
mixed with manure or sludge in the ratio of
2:1 by volume (2 parts of stacked volume of
earth after reduction by 20% :1 part of
stacked volume of manure after reduction by
8%) flooding with water,dressing including
removal of rubbish and surplus earth, if
any with all leads and lifts (cost of
manure, sludge or extra good earth if
needed to be paid for separately);-Holes 60
cm dia and 60cm deep

23.15.1 Half brick circular tree guard in 50 class each 1,448.02


designation bricks, internal diameter 1.25
metre and height 1.2 metre above ground and
0.20 m below ground bottom two courses laid
dry and top three courses in lime mortar
1:2 (1 lime putty : 2 surkhi) or cement
mortar 1:6 (1 cement : 6 fine sand) and the

Puducherry Region
23. Horticulture and Landscaping
Page No.: 459
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

intermediate courses being in dry honey


comb masonry as per design complete : -
with F.P.S.bricks

23.16 Providing and fixing M.S.flat iron tree each 3,081.45


guard 60cm dia . and 2 m height above
ground level formed of 4 nos.25x6mm and
8nos.25x3mm vertical M.S flats rivetted to
3 nos.25x6mm M.S.flat iron rings in two
halves, bolted together with 8mm dia .and
30mm long bolts including painting two
coats with paint of approved brand and
manufacture over a coat of priming,complete
in all respects.

23.17.1 Making tree guard 53 cm dia and 1.3m high each 253.29
as per design from empty coal tar drums
supplied free by the department including
providing and fixing 2 nos. M.S.sheet rings
50x0.5mm with rivets complete in all
respects including painting inside and
outside of tree guard with - A coat of coal
tar.

23.17.1. Making tree guard 53cms dia. And 1.3m high each 253.29
as per design from empty coal tar drums
supplied free by the department including
providing and fixing 2 nos, MS sheet rings
50x 0.5 mm with rivets complete in all
respects including painting inside and
outside of tree guard with
A coat of coal tar.

23.17.2 Making tree guard 53 cm dia and 1.3m high each 424.13
as per design from empty coal tar drums
supplied free by the department including
providing and fixing 2 nos. M.S.sheet rings
50x0.5mm with rivets complete in all
respects including painting inside and
outside of tree guard with - Two or more
coats of synthetic enamel paint of approved
quality shade over a priming coat.

23.18.1 Making tree guard 53 cm dia and 2 m high as each 488.08


per design from empty coal tar drums
supplied free by the department including
providing and fixing four legs 40 cm long
of 30 x 3 mm M.S. flat riveted to tree
guard and providing and fixing 2
nos.M.S.sheet rings 50x0.5mm with rivets
complete in all respects including painting
inside and outside of tree guard with : A

Puducherry Region
23. Horticulture and Landscaping
Page No.: 460
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

coat of coal tar.

23.18.2 Making tree guard 53 cm dia.and 2m high as each 990.80


per design from empty coal tar drums
supplied free by the department including
providing and fixing four legs 40 cm long
of 30 x 3 mm M.S. flat riveted to tree
guard and providing and fixing 2 nos. M.S.
sheet rings 50 x 0.5 mm with rivets
complete in all respects including painting
inside and outside of tree guard with : Two
or more coats of synthetic enamel paint of
approved quality and shade over a priming
coat.

23.19.1.1 Edging with bricks laid dry length wise metre 32.87
including excavation, refilling
consolidating with hand packing and
spreading neatly surplus earth within a
lead of 50m
75 class designation
F.P.S Bricks

23.19.2.1 Edging with bricks laid dry lengthwise metre 32.87


including excavaion, refilling,
consolidating with hand packing and
spreading neatly surplus earth within a
lead of 50m - 50 class designation - FPS
bricks.

23.20 Filling mixture of earth and sludge or cum 9.45


manure in the desired proportion in
trenches, flooding with water and levelling
(cost of supplying earth and sludge or
manure and mixing excluded).

23.21 Excavation in dumped stones or malba cum 261.63


including stacking of serviceable and
unserviceable material separately and
disposal of unserviceable material lead
upto 50m and lift upto 1.5m disposed
material to be neatly dressed.

23.22 Excavation in bajri path including stacking cum 292.49


of serviceable and unserviceable material
lead upto 50m and lift upto 1.5m disposed
material to be neatly dressed.

23.23 Excavation in water bound macadam road cum 360.01


including stacking the serviceable and
unserviceable material separately and
disposal of unserviceable material lead

Puducherry Region
23. Horticulture and Landscaping
Page No.: 461
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

upto 50m and lift upto 1.5m disposed


material to be neatly dressed.

23.24 Flooding the ground with water including sqm 1.41


making kiaries and dismantling the same.

Puducherry Region
30. Irrigation
Page No.: 462
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

30.1 Earth work in rough excavation and dressing cum 142.75


up in embankment for roads, flood banks,
marginal banks and guide banks or filling
up ground depression lead upto 50m and lift
upto 1.5m in all kinds of soil(Payment
shall be made based on levels). - by manual
means

30.1A Preparation of steel mould of Size Cum 246.54


0.5x0.5x0.45m

30.1B Preparation of steel mould of size Cum 126.06


0.9x0.9x0.45 (6mm tk plate)

30.2 Earth work in rough excavation, banking cum 234.18


excavated earth in layers not exceeding
20cm in depth, breaking clods watering
rolling each layer with « tonne roller or
wooden or steel rammers and dressing up in
embankments for roads flood banks, marginal
banks and guide banks or filling up ground
depression, lead upto 50m and lift upto
1.5m in all kinds of soil. The payment
shall be based on levels.

30.3A Collection of gravel and banking the gravel cum 634.55


in layers not exceeding 20cm in depth
breaking clods, watering, rolling each
layers with 1/2 tonne roller or wooden or
steel rammers and dressing up in
embankements for roads flood banks,
marginal banks and guide banks etcand lift
upto 1.5m in all kinds of soil.The quantity
of the fill shall be calculated based on
levels and then reduced by 10% for the
purpose of payment.

30.4 Banking available earth in layers not cum 92.02


exceeding 20cm in depth breaking clods,
watering, rolling each layers with « tonne
roller or wooden or steel rammers and
dressing up in embankments for roads flood
banks, marginal banks and guide banks etc
and lift upto 1.5m in all kinds of soil.
The quantity of the fill shall be
calculated based on levels and then reduced
by 10% for the purpose of payment.

30.5 Earth work in rough excavation and dressing cum 40.79


up in embankment by using machinery for
roads, flood banks, marginal banks and
guide banks or filling up ground depression

Puducherry Region
30. Irrigation
Page No.: 463
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

within a initial lead of 50m and lift upto


6.0m in all kinds of soil(Payment shall be
made based on levels).

30.7 Supply of Quary rubbish including stacking cum 633.11


to department gauge for premeasurement and
spreading required thickness as directed by
the Engineer-in-charge

30.8 Providing and fixing 110mm dia PVC metre 207.28


pipe(4kg/cm2) in weep holes including
cement concrete 1:5:10( one cement 5 sand
and 10 graded stone aggregate)and filling
of pebbles etc., as directed by the
Engineer-in-charge.

30.9 Supplying and placing in position HDPE bag 54.59


cement bags filled with sand for breach
closing / diversion arrangement. The cost
includes the cost of empty HDPE bags,
labour charges for filling the bags and
placing in position, removing the bags from
site after completing the work etc.,
complete.

30.10 Removing and repacking of rough stone for cum 803.69


revetment etc., complete

30.11 Supplying with gravel for apron and cum 627.39


rivetment.

30.12 Providing and laying brick block of size cum 5,046.75


0.34x0.34x0.30mts. In C.M. 1:4 (1 cement :
4 fine sand) using well burnt country
bricks of class designation 35 for
launching apron including the bed, laying
to the required levels, slop etc. complete
as directed by the Engineer-in-charge.

30.13 Providing and laying brick block of size cum 5,046.75


0.34x0.34x0.23mts. In C.M. 1:4 (1 cement :
4 fine sand) using well burnt country
bricks of class designation 35 for apron
and revetment including levelling the bed,
laying to the required levels, slop etc.
complete as directed by the
Engineer-in-charge.

30.13C Providing and laying precast cement Cum 5,264.25


concrete blocks for launching apron of size
0.5 x 0.5 x 0.45m in cement concrete 1:3:6
( 1cement, 3sand and 6 Graded stone

Puducherry Region
30. Irrigation
Page No.: 464
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

aggregate) using 6mm thick steel mould


including consolidation, curing and placing
in position etc. complete.

30.13D Providing and laying precast cement Cum 5,130.15


concrete blocks for launching apron of size
0.9x 0.9 x 0.45m in cement concrete 1:3:6 (
1cement, 3sand and 6 Graded stone
aggregate) using 6mm thick steel mould
including consolidation, curing and placing
in position etc. complete.

30.14 Dry stone pitching on slopes to required cum 2,431.62


thickness and profile with hammer dressed
granite stones having no side less than
15cum for revetment works, preparing
surface etc., complete as directed by the
Engineer-in-charge.

30.14L Cost of labour for stone pitching cum 1,225.97

30.15 Earth work in rough excavation over area sqm 12.25


not exceeding 30 cm thick and dressing up
in embankment by using machinery for
roads, flood banks, marginal banks and
guide banks on filling up ground depression
within a initial lead of 50m and lift upto
6 m in all kinds of soil.

30.16 Demarcation of field boundaries to the tank hectare 1,651.73


site and planting survey stone wherever
necessary. The rate to include all cost for
surveyor, Chainman, earthwork excavation,
conveyance of stones to the workspot and
labour for erection etc., complete. (The
rate excludes the cost of survey stone)

30.17 Demarcation of field boundaries to the Rmt 17.84


supply channels and planting survey stone
wherever necessary. The rate to include all
cost for surveyor, Chainman, earthwork
excavation, conveyance of stones to the
workspot and labour for erection etc.,
complete. (The rate excludes the cost of
survey stone)

30.18 Grouting the revetment not less than 15cm sqm 338.17
deep with cement concrete 1:5:10 (one
cement , five sand , and ten graded stone
aggregate of 12.50mm size) and pointing the
same with cement mortar 1:5 (one cement and
five sand ) to give an even and smooth

Puducherry Region
30. Irrigation
Page No.: 465
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

surface)

30.19 Collection and supply of stone boulders at MT 638.99


Various weights including the charges for
conveyance, pre- weighing the loaded
vehicle and post- weighing the empty
vehicle and placing the boulders to the
required slope and section by using
suitable machinery including handling and
packing charges, crane charges etc.,
complete. The payment will be made based on
weight basis. The quantity will be counter
checked by way of volumes computed based on
pre-levels and post-levels of the section
and the volume thus computed will be
arrived in weight after reducing for the
corresponding voids depending on the size
of the stone boulders. This rate shall
include the costs of formation of approach
track for transportations of materials, men
and machinery for the placing and dumping
the boulders in position for groins / sea
protection wall / rock revetment as per
sectional drawing etc., complete, as
directed by the Engineer - in - charge. The
specific gravity of stone shall be from
2.90 to 3.02. Bedding layer after deducting
30% voids.Using 10mm to 50kg.

30.20 Collection and supply of stone boulders at MT 841.33


Various weights including the charges for
conveyance, pre- weighing the loaded
vehicle and post- weighing the empty
vehicle and placing the boulders to the
required slope and section by using
suitable machinery including handling and
packing charges, crane charges etc.,
complete. The payment will be made based on
weight basis. The quantity will be counter
checked by way of volumes computed based on
pre-levels and post-levels of the section
and the volume thus computed will be
arrived in weight after reducing for the
corresponding voids depending on the size
of the stone boulders. This rate shall
include the costs of formation of approach
track for transportations of materials, men
and machinery for the placing and dumping
the boulders in position for groins / sea
protection wall / rock revetment as per
sectional drawing and harbouring works
also etc., complete, as directed by the

Puducherry Region
30. Irrigation
Page No.: 466
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Engineer - in - charge. The specific


gravity of stone shall be from 2.90 to
3.02. Core after deducting 30% voids. Using
5kg to 100kg.

30.20A Collection and supply of stone boulders at MT 841.33


Various weights including the charges for
conveyance, pre- weighing the loaded
vehicle and post- weighing the empty
vehicle and placing the boulders to the
required slope and section by using
suitable machinery including handling and
packing charges, crane charges etc.,
complete. The payment will be made based on
weight basis. The quantity will be counter
checked by way of volumes computed based on
pre-levels and post-levels of the section
and the volume thus computed will be
arrived in weight after reducing for the
corresponding voids depending on the size
of the stone boulders. This rate shall
include the costs of formation of approach
track for transportations of materials, men
and machinery for the placing and dumping
the boulders in position for groins / sea
protection wall / rock revetment as per
sectional drawing and harbouring works also
etc., complete, as directed by the Engineer
- in - charge. The specific gravity of
stone shall be from 2.90 to 3.02. Toe after
deducting 30% voids. Using 100kg to 300kg.

30.20B Collection and supply of stone boulders at MT 841.33


Various weights including the charges for
conveyance, pre- weighing the loaded
vehicle and post- weighing the empty
vehicle and placing the boulders to the
required slope and section by using
suitable machinery including handling and
packing charges, crane charges etc.,
complete. The payment will be made based on
weight basis. The quantity will be counter
checked by way of volumes computed based on
pre-levels and post-levels of the section
and the volume thus computed will be
arrived in weight after reducing for the
corresponding voids depending on the size
of the stone boulders. This rate shall
include the costs of formation of approach
track for transportations of materials, men
and machinery for the placing and dumping
the boulders in position for groins / sea

Puducherry Region
30. Irrigation
Page No.: 467
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

protection wall / rock revetment as per


sectional drawing and harbouring works
also etc., complete, as directed by the
Engineer - in - charge. The specific
gravity of stone shall be from 2.90 to
3.02. Secondary layer after deducting 30%
voids. Using 100kg to 300kg.

30.20C Collection and supply of stone boulders at MT 841.33


Various weights including the charges for
conveyance, pre- weighing the loaded
vehicle and post- weighing the empty
vehicle and placing the boulders to the
required slope and section by using
suitable machinery including handling and
packing charges, crane charges etc.,
complete. The payment will be made based on
weight basis. The quantity will be counter
checked by way of volumes computed based on
pre-levels and post-levels of the section
and the volume thus computed will be
arrived in weight after reducing for the
corresponding voids depending on the size
of the stone boulders. This rate shall
include the costs of formation of approach
track for transportations of materials, men
and machinery for the placing and dumping
the boulders in position for groins / sea
protection wall / rock revetment as per
sectional drawing and harbouring works also
etc., complete, as directed by the Engineer
- in - charge. The specific gravity of
stone shall be from 2.90 to 3.02. Armour
layer after deducting 40% voids. Using 1.25
tonne to 2.00 tonne.

30.22 Dry excavation in the shore area between cum 94.04


sea and back water. The rate shall include
the cost of labour, material, consumables,
POL, spare parts etc. The payment shall be
made based on levels.

30.25 Providing and laying filter media for cum 1,541.77


coarse sand under concrete block loose
apron ( as filter media ) to required
thickness including removal of foreign
matters, ramming, consolidation with
watering.

30.26 Providing and laying filter media using HBG cum 1,122.45
metal of 10mm size to a required thickness.

Puducherry Region
30. Irrigation
Page No.: 468
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

30.26A Providing and laying filter media using HBG cum 1,122.45
metal of 12.5mm size to a required
thickness.

30.26B Providing and laying filter media using HBG cum 1,303.29
metal of 20mm size to a required thickness.

30.26C Providing and laying filter media using HBG cum 1,001.89
metal of 40mm size to a required thickness.

30.26D Providing and laying filter media using HBG cum 821.04
metal of 63mm size to a required thickness.

30.27 Providing and fixing cement concrete rings Nos 319.60


of 900mm dia, 300mm height and 40mm thick
in 1:2:4 (one cement, two sand and four
12mm HBG metal) with slots in the walls and
provided with nominal reinforcement. The
rate to include the cost of cement concrete
rings, transportation to site, labour for
erection, fixing with cement mortar 1:3
(one cement and three sand) all complete.

30.27A Providing and fixing cement concrete rings No 285.84


of 900mm dia,300mm height and 40mm thick
in 1:2:4 (one cement, two sand and four
12mm HBG metal) and provided with nominal
reinforcement. The rate to include the cost
of cement concrete rings, transportation to
site, labour for erection, fixing with
cement mortar 1:3 (one cement and three
sand) all complete.

30.27B Providing and fixing cement concrete rings No 551.08


of 900mm dia, 300mm height and 40mm thick
in 1:2:4 (one cement, two sand and four
12mm HBG metal) cast monolithic with cover
slab with nominal reinforcement. The rate
to include the cost of cement concrete
rings, transportation to site, labour for
erection, fixing with cement mortar 1:3
(one cement and three sand) all complete.

30.28 Providing and fixing UPVC top cover No 249.38


suitable for 150mm dia pipe. The rate to
include the cost of cover, transportation
to site and fixing in position.

30.29 Supplying and lowering of UPVC 150mm dia Rmt. 1,001.49


Plain casing pipe confirming to IS.
12818-1992 with relevant amendments with
class designation CM and with minimum wall

Puducherry Region
30. Irrigation
Page No.: 469
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

thickness of 7.5mm as per I.S.Code into the


bore well with proper vertical alignments
etc. Including the cost of materials, but
excluding the cost of labour for
positioning the assembly for lowering
purpose using contractor's rig.

30.30 Extra for providing 3mm slots in 150mm dia. Rmt 54.26
UPVC casing pipes.

30.30A Extra for providing 3mm slots in 200mm dia. Rmt 72.34
UPVC casing pipes.

30.31 Supplying and packing of 8mm size down Cum 2,965.39


gauge graded pebble including filling the
annual space gradually complete. The
pebbles should be of free from
disintegrated pieces. (It will measure in
stack for the purpose of payment)

30.32 Providing and fixing netlon mesh. Sqm 339.80

30.33 Supplying and fixing 8" to 4" dia M.S each 2,001.66
saddlle set with 4" dia coupling suited to
connect 4" dia pipes.

30.34 Supplying and lowering of UPVC 200mm dia Rmt 1,863.92


Plain casing pipe confirming to IS.
12818-1992 with relevant amendments with
class designation CM and with minimum wall
thickness of 10mm as per I.S.Code into the
bore well with proper vertical alignments
etc. Including the cost of materials, but
excluding the cost of labour for
positioning the assembly for lowering
purpose using contractor's rig excluding
the hire charges thereof.

30.35 Supplying and lowering of UPVC ribbed Rmt 2,203.90


screen slotted pipe 200mm dia confirming
to IS. 12818-1992 with relevant amendments
with class designation 'RS' and with
minimum wall thickness as per I.S.Code into
the bore well with proper vertical
alignments etc. Including the cost of
materials, but excluding the cost for
lowering purposes using contractor's rig
excluding the hire charges thereof.

30.36 Supplying and fixing of MS centering guide each 229.08


of size 25mm x 3mm thickness suitable for
UPVC pipe including the cost of materials

Puducherry Region
30. Irrigation
Page No.: 470
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

but excluding the cost of labour for


positioning the assembly for lowering
purpose using contractors rig excluding the
hire charges thereof - 200mm dia.

30.37 Desilting the canal by removing silt,slush cum 232.52


and debries from the bed of the drain
removing the grass, buses etc., complete in
unhygenic and foul condition including
diposal of the same within an average lead
of 1km without polluting the environment as
directed by the engineer-in-charge- by
mechanical means

30.38 Desilting the canal by removing silt,slush cum 189.04


and debries from the bed of the drain
removing the grass, buses etc., complete in
unhygenic and foul condition including
diposal of the same within an average lead
of 1km without polluting the environment as
directed by the engineer-in-charge- by
manual means

30.39 Conveyance of excavated earth with in a cum 217.49


lead of 5km radius beyond the initial lead
of 50m and filling up in embankments for
roads , flood banks marginal banks and
guide banks etc. in all kind of soils. The
quantity of conveyed earth shall be
calculated based on level and the total
quantity shall be reduced by 20% for the
purpose of payment

Puducherry Region
31. Water Supply (Public Health)
Page No.: 471
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.4.1 Making connection of G.I. distribution each 443.59


branch with G.I. main of following sizes by
providing and fixing tee, including cutting
and threading the pipe etc. complete 25 -
40 mm nominal bore.

31.4.2 Making connection of G.I. distribution each 850.37


branch with G.I. main of following sizes by
providing and fixing tee, including cutting
and threading the pipe etc. complete - 50
to 80 mm nominal bore.

31.4.3 Making connection of G.I. distribution each 3,156.76


branch with G.I. main of following sizes by
providing and fixing tee, including cutting
and threading the pipe etc. complete - 100
to 150 mm nominal bore.

31.5.1A Making connection of uPVC distribution Each 544.04


branch with Upvc main of following sizes by
providing and fixing tee including cutting
the pipe etc.,compete.-63 mm dia to 90 mm
dia nominal bore.

31.5.1B Making connection of uPVC distribution Each 826.47


branch with Upvc main of following sizes by
providing and fixing tee including cutting
the pipe etc.,compete.-110 mm dia to 160 mm
dia nominal bore.

31.5.2A Making connection of uPVC distribution Each 3,071.85


branch with G.I main of following sizes by
providing and fixing necessary fittings
such as cost of lead, lead caulked joint
including cutting,threading and testing of
joints etc.,complete.- 63 mm dia to 90 mm
dia nominal bore.

31.5.2B Making connection of uPVC distribution Each 4,687.69


branch with G.I main of following sizes by
providing and fixing necessary fittings
such as cost of lead, lead caulked joint
including cutting,threading and testing of
joints etc.,complete.- 110 mm dia to 160 mm
dia nominal bore.

31.5.3A Making connection of G.I distribution Each 98.86


branch with C.I/PVC main of following size
by providing and fixing tee including
cutting and threading the pipe
etc.,complete.- 20 mm dia nominal bore.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 472
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.6 Fixing water meter and stop cock in G.I each 367.64
pipe line including cutting and threading
the pipe, making long screws etc. complete.
(cost of water meter and stop cock to be
paid separately).

31.6A Providing and fixing water meter and stop each 2,224.32
cock in 25mm G.I pipe line including
cutting and threading the pipe, making long
screws, bolts, nuts, rubber insertions and
testing the water meter etc. complete.

31.6B Providing and fixing water meter make each 1,549.16


(DASMESH) and stop cock in 25mm G.I pipe
line including cutting and threading the
pipe, making long screws, bolts, nuts,
rubber insertions and testing the water
meter etc. complete.

31.9.1 Providing and fixing brass gate valve with each 193.99
C.I. wheel of approved quality (screwed
end) - 15mm nominal bore.

31.9.2 Providing and fixing brass gate valve with each 215.02
C.I. wheel of approved quality (screwed
end) - 20mm nominal bore.

31.9.3 Providing and fixing brass gate valve with each 408.22
C.I. wheel of approved quality (screwed
end) - 25mm nominal bore.

31.9.4 Providing and fixing brass gate valve each 592.02


with C.I. wheel of approved quality
(screwed end) - 32mm nominal bore.

31.9.5 Providing and fixing brass gate valve with each 823.80
C.I. wheel of approved quality (screwed
end) - 40mm nominal bore.

31.9.6 Providing and fixing brass gate valve with each 1,115.86
C.I. wheel of approved quality (screwed
end) - 50mm nominal bore.

31.10.3.1 Providing and fixing ball valve (brass) of each 262.55


approved quality complete - high or low
pressure with plastic floats - 15 mm
nominal bore.

31.10.3.2 Providing and fixing ball valve (brass) of each 442.57


approved quality complete - high or low
pressure with plastic floats - 20 mm
nominal bore.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 473
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.10.3.3 Providing and fixing ball valve (brass) of each 477.94


approved quality complete - high or low
pressure with plastic floats - 25mm
nominal bore.

31.11.7.2 Providing and fixing gun metal non-return each 1,555.65


valve of approved quality (screwed end) -
100 mm nominal bore - vertical.

31.19 Laying in position centrifugally cast quintal 144.33


(spun) / Ductile Iron S&S or flanged pipes.

31.20 Laying in position S&S or flanged C.I. / quintal 276.94


D.I. specials such as tees, bends, collars,
tapers and caps etc.

31.45.1 Providing lead caulked joint to spun iron Joints 206.02


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 80 mm diameter pipe.

31.45.2 Providing lead caulked joint to spun iron Joints 211.32


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 100 mm diameter pipe.

31.45.3 Providing lead caulked joint to spun iron Joints 313.12


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 125 mm diameter pipe.

31.45.4 Providing lead caulked joint to spun iron Joints 316.42


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 150 mm diameter pipe.

31.45.5 Providing lead caulked joint to spun iron Joints 420.61


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 200 mm diameter pipe.

31.45.6 Providing lead caulked joint to spun iron Joints 526.23


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 250 mm diameter pipe.

31.45.7 Providing lead caulked joint to spun iron Joints 633.90


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 300 mm diameter pipe.

31.45.8 Providing lead caulked joint to spun iron joints 644.74

Puducherry Region
31. Water Supply (Public Health)
Page No.: 474
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

or C.I./D.I. pipes and specials including


testing of the joints but excluding the
cost of pig lead - 350 mm diameter pipe.

31.45.9 Providing lead caulked joint to spun iron joints 848.82


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 400 mm diameter pipe.

31.45.10 Providing lead caulked joint to spun iron joints 952.50


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 450 mm diameter pipe.

31.45.11 Providing lead caulked joint to spun iron joints 1,007.03


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 500 mm diameter pipe.

31.45.12 Providing lead caulked joint to spun iron joints 1,365.38


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 600 mm diameter pipe.

31.45.13 Providing lead caulked joint to spun iron joints 1,638.58


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 700 mm diameter pipe.

31.45.14 Providing lead caulked joint to spun iron joints 1,802.35


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 750 mm diameter pipe.

31.45.15 Providing lead caulked joint to spun iron joints 1,966.17


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 800 mm diameter pipe.

31.45.16 Providing lead caulked joint to spun iron joints 2,358.92


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 900 mm diameter pipe.

31.45.17 Providing lead caulked joint to spun iron joints 2,831.44


or C.I./D.I. pipes and specials including
testing of the joints but excluding the
cost of pig lead - 1000 mm diameter pipe.

31.46 Supplying pig lead at site of work. qtl. 33,155.02

31.47.1 Providing flanged joints to double flanged each 506.19

Puducherry Region
31. Water Supply (Public Health)
Page No.: 475
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

C.I./D.I. pipes and specials including


necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 80mm
diameter pipe.

31.47.2 Providing flanged joints to double flanged each 530.18


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 100mm
diameter pipe.

31.47.3 Providing flanged joints to double flanged each 582.02


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 125mm
diameter pipe.

31.47.4 Providing flanged joints to double flanged each 918.33


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 150mm
diameter pipe.

31.47.5 Providing flanged joints to double flanged each 1,380.09


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 200mm
diameter pipe.

31.47.6 Providing flanged joints to double flanged each 1,553.58


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 250mm
diameter pipe.

31.47.7 Providing flanged joints to double flanged each 1,583.72


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 300mm
diameter pipe.

31.47.8 Providing flanged joints to double flanged each 2,223.80


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 350mm
diameter pipe.

31.47.9 Providing flanged joints to double flanged each 2,374.50


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 400mm
diameter pipe.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 476
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.47.10 Providing flanged joints to double flanged each 3,065.94


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 450mm
diameter pipe.

31.47.11 Providing flanged joints to double flanged each 4,701.20


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 500mm
diameter pipe.

31.47.12 Providing flanged joints to double flanged each 4,889.16


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 600mm
diameter pipe.

31.47.13 Providing flanged joints to double flanged each 5,887.70


C.I. /D.I.pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 700mm
diameter pipe.

31.47.14 Providing flanged joints to double flanged each 7,355.57


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 750mm
diameter pipe.

31.47.15 Providing flanged joints to double flanged each 7,719.45


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 800mm
diameter pipe.

31.47.16 Providing flanged joints to double flanged each 8,827.48


C.I./D.I. pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 900mm
diameter pipe.

31.47.17 Providing flanged joints to double flanged each 9,883.03


C.I. /D.I.pipes and specials including
necessary bolts, nuts, rubber insertion and
testing of joints etc.,complete - 1000mm
diameter pipe.

31.48.1A Providing and fixing C.I. sluice valve (PN each 6,399.39
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete(the tail pieces if

Puducherry Region
31. Water Supply (Public Health)
Page No.: 477
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

required will be paid separately) - 80 mm


dia.

31.48.1B Providing and fixing C.I. sluice valve (PN each 8,322.82
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 100 mm
dia.

31.48.1C Providing and fixing C.I. sluice valve (PN each 10,200.68
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 125 mm
dia.

31.48.1D Providing and fixing C.I. sluice valve (PN each 12,871.30
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 150 mm
dia.

31.48.1E Providing and fixing C.I. sluice valve (PN each 20,651.99
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 200 mm
dia.

31.48.1F Providing and fixing C.I. sluice valve (PN each 31,967.98
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 250 mm
dia.

31.48.1G Providing and fixing C.I. sluice valve (PN each 40,025.93
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 300 mm
dia.

31.48.1H Providing and fixing C.I. sluice valve (PN each 56,790.96
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 350 mm
dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 478
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.48.1I Providing and fixing C.I. sluice valve (PN each 70,805.34
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 400 mm
dia.

31.48.1J Providing and fixing C.I. sluice valve (PN each 1,01,786.13
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 450 mm
dia.

31.48.1K Providing and fixing C.I. sluice valve (PN each 1,34,999.56
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 500 mm
dia.

31.48.1L Providing and fixing C.I. sluice valve (PN each 1,96,600.09
1) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 600 mm
dia.

31.48.2A Providing and fixing C.I. sluice valve (PN each 6,726.12
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 80 mm
dia.

31.48.2B Providing and fixing C.I. sluice valve (PN each 8,648.35
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 100 mm
dia.

31.48.2C Providing and fixing C.I. sluice valve (PN each 10,526.20
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 125 mm
dia.

31.48.2D Providing and fixing C.I. sluice valve (PN each 13,359.58
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber

Puducherry Region
31. Water Supply (Public Health)
Page No.: 479
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

insertion etc.,complete (the tail pieces if


required will be paid separately) - 150 mm
dia.

31.48.2E Providing and fixing C.I. sluice valve (PN each 21,143.84
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 200 mm
dia.

31.48.2F Providing and fixing C.I. sluice valve (PN each 32,620.23
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 250 mm
dia.

31.48.2G Providing and fixing C.I. sluice valve (PN each 40,514.22
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 300 mm
dia.

31.48.2H Providing and fixing C.I. sluice valve (PN each 58,746.50
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 350 mm
dia.

31.48.2I Providing and fixing C.I. sluice valve (PN each 71,781.90
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 400 mm
dia.

31.48.2J Providing and fixing C.I. sluice valve (PN each 1,03,414.95
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 450 mm
dia.

31.48.2K Providing and fixing C.I. sluice valve (PN each 1,36,629.58
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 500 mm
dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 480
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.48.2L Providing and fixing C.I. sluice valve (PN each 1,98,230.11
1) (with handwheel) conforming to IS 14846
and ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 600 mm
dia.

31.48.3A Providing and fixing C.I. sluice valve (PN each 6,868.97
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 80 mm
dia.

31.48.3B Providing and fixing C.I. sluice valve (PN each 8,901.53
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 100 mm
dia.

31.48.3C Providing and fixing C.I. sluice valve (PN each 11,109.20
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 125 mm
dia.

31.48.3D Providing and fixing C.I. sluice valve (PN each 13,781.75
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 150 mm
dia.

31.48.3E Providing and fixing C.I. sluice valve (PN each 21,310.96
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 200 mm
dia.

31.48.3F Providing and fixing C.I. sluice valve (PN each 33,981.22
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 250 mm
dia.

31.48.3G Providing and fixing C.I. sluice valve (PN each 43,722.56
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber

Puducherry Region
31. Water Supply (Public Health)
Page No.: 481
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

insertion etc.,complete (the tail pieces if


required will be paid separately) - 300 mm
dia.

31.48.3H Providing and fixing C.I. sluice valve (PN each 67,370.65
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 350 mm
dia.

31.48.3I Providing and fixing C.I. sluice valve (PN each 83,714.09
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 400 mm
dia.

31.48.3J Providing and fixing C.I. sluice valve (PN each 1,07,758.86
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 450 mm
dia.

31.48.3K Providing and fixing C.I. sluice valve (PN each 1,57,531.71
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 500 mm
dia.

31.48.3L Providing and fixing C.I. sluice valve (PN each 2,09,656.46
1.6) (with cap) conforming to IS 14846 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 600 mm
dia.

31.48.4A Providing and fixing C.I. sluice valve (PN each 6,964.22
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 80 mm dia.

31.48.4B Providing and fixing C.I. sluice valve (PN each 9,194.50
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 100 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 482
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.48.4C Providing and fixing C.I. sluice valve (PN each 11,458.84
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 125 mm dia.

31.48.4D Providing and fixing C.I. sluice valve (PN each 14,131.38
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 150 mm dia.

31.48.4E Providing and fixing C.I. sluice valve (PN each 21,825.77
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 200 mm dia.

31.48.4F Providing and fixing C.I. sluice valve (PN each 34,479.14
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 250 mm dia.

31.48.4G Providing and fixing C.I. sluice valve (PN each 44,239.78
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 300 mm dia.

31.48.4H Providing and fixing C.I. sluice valve (PN each 68,349.62
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 350 mm dia.

31.48.4I Providing and fixing C.I. sluice valve (PN each 84,693.07
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 400 mm dia.

31.48.4J Providing and fixing C.I. sluice valve (PN each 1,09,827.73
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,

Puducherry Region
31. Water Supply (Public Health)
Page No.: 483
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

rubber insertion etc.,complete (the tail


pieces if required will be paid separately)
- 450 mm dia.

31.48.4K Providing and fixing C.I. sluice valve (PN each 1,57,531.71
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 500 mm dia.

31.48.4L Providing and fixing C.I. sluice valve (PN each 2,11,728.95
1.6) (with handwheel) conforming to IS
14846 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 600 mm dia.

31.48.5A Providing and fixing C.I. Single air valve each 871.67
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 20 mm dia.

31.48.6A Providing and fixing C.I. Double air valve each 2,239.47
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 40 mm dia.

31.48.6B Providing and fixing C.I. Double air valve each 2,258.77
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 50 mm dia.

31.48.6C Providing and fixing C.I. Double air valve each 2,952.60
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 65 mm dia.

31.48.6D Providing and fixing C.I. Double air valve each 3,298.62
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 80 mm dia.

31.48.6E Providing and fixing C.I. Double air valve each 3,966.55
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 100 mm dia.

31.48.6F Providing and fixing C.I. Double air valve each 9,939.28
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 150 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 484
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.48.6G Providing and fixing C.I. Double air valve each 19,474.66
with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 200 mm dia.

31.48.7A Providing and fixing C.I. non return valve each 3,502.38
(PN 1.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 50 mm dia

31.48.7B Providing and fixing C.I. non return valve each 3,993.07
(PN 1.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 65 mm dia

31.48.7C Providing and fixing C.I. non return valve each 4,915.39
(PN 1.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 80 mm dia

31.48.7D Providing and fixing C.I. non return valve each 6,666.58
(PN 1.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 100 mm dia

31.48.7E Providing and fixing C.I. non return valve each 8,561.23
(PN 1.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 125 mm dia

31.48.7F Providing and fixing C.I. non return valve each 10,403.44
(PN 1) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 150 mm dia

31.48.7G Providing and fixing C.I. non return valve each 19,126.23
(PN 1) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 200 mm dia

31.48.7H Providing and fixing C.I. non return valve each 28,739.98
(PN 1) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 250 mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 485
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.48.7I Providing and fixing C.I. non return valve each 38,820.92
(PN 1) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 300 mm dia

31.48.7J Providing and fixing C.I. non return valve each 68,488.03
(PN 0.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 350 mm dia

31.48.7K Providing and fixing C.I. non return valve each 83,926.20
(PN 0.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 400 mm dia

31.48.7L Providing and fixing C.I. non return valve each 1,76,288.24
(PN 0.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 500 mm dia

31.48.7M Providing and fixing C.I. non return valve each 2,00,681.29
(PN 0.6) conforming to IS 5312 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 600 mm dia

31.48.8A Providing and fixing C.I. Ball type non Each 8,790.30
return valve (PN 1) conforming to IS 318 &
IS 1363, with bolts, nuts, rubber insertion
etc.,complete - 80 mm dia.

31.48.8B Providing and fixing C.I. Ball type non Each 14,587.62
return valve (PN 1) conforming to IS 318 &
IS 1363, with bolts, nuts, rubber
insertion etc.,complete (the tail pieces if
required will be paid separately) - 100 mm
dia.

31.48.8C Providing and fixing C.I. Ball type non Each 21,932.95
return valve (PN 1) conforming to IS 318 &
IS 1363, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 150 mm dia.

31.48.8D Providing and fixing C.I. Ball type non Each 34,646.40
return valve (PN 1) conforming to IS 318 &
IS 1363, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required

Puducherry Region
31. Water Supply (Public Health)
Page No.: 486
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

will be paid separately) - 200 mm dia.

31.48.8E Providing and fixing C.I. Ball type non Each 53,227.66
return valve (PN 1) conforming to IS 318 &
IS 1363, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 250 mm dia.

31.48.8F Providing and fixing C.I. Ball type non Each 77,325.34
return valve (PN 1) conforming to IS 318 &
IS 1363, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 300 mm dia.

31.48.8G Providing and fixing C.I. Ball type non Each 1,15,140.15
return valve (PN 1) conforming to IS 318 &
IS 1363, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 350mm dia.

31.48.9A Providing and fixing C.I. Butterfly valve Each 2,070.08


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 50mm dia.

31.48.9B Providing and fixing C.I. Butterfly valve Each 2,552.34


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 65mm dia.

31.48.9C Providing and fixing C.I. Butterfly valve Each 3,063.52


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 80mm dia.

31.48.9D Providing and fixing C.I. Butterfly valve Each 3,947.87


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 100mm dia.

31.48.9E Providing and fixing C.I. Butterfly valve Each 5,573.06


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 125mm dia.

31.48.9F Providing and fixing C.I. Butterfly valve Each 7,284.46


(PN 1) conforming to IS 13095 and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 487
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked, with bolts, nuts, rubber insertion


etc.,complete (the tail pieces if required
will be paid separately) - 150mm dia.

31.48.9G Providing and fixing C.I. Butterfly valve Each 11,498.16


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 200mm dia.

31.48.9H Providing and fixing C.I. Butterfly valve Each 15,611.79


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 250mm dia.

31.48.9I Providing and fixing C.I. Butterfly valve Each 20,117.87


(PN 1) conforming to IS 13095 and ISI
marked, with bolts, nuts, rubber insertion
etc.,complete (the tail pieces if required
will be paid separately) - 300mm dia.

31.48.10A Providing and fixing C.I. swing type double Each 22,385.06
door Foot valve (PN 1) conforming to IS
4038 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 50mm dia.

31.48.10B Providing and fixing C.I. swing type double Each 32,030.16
door Foot valve (PN 1) conforming to IS
4038 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 65mm dia.

31.48.10C Providing and fixing C.I. swing type double Each 52,193.24
door Foot valve (PN 1) conforming to IS
4038 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 80mm dia.

31.48.10D Providing and fixing C.I. swing type double Each 72,728.25
door Foot valve (PN 1) conforming to IS
4038 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 100mm dia.

31.48.11A Providing and fixing C.I. swing type single Each 2,347.37
door Foot valve conforming to IS 4038 and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 488
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

ISI marked, with bolts, nuts, rubber


insertion etc.,complete - 50mm dia.

31.48.11B Providing and fixing C.I. swing type single Each 2,733.18
door Foot valve conforming to IS 4038 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete - 65mm dia.

31.48.11C Providing and fixing C.I. swing type single Each 4,088.32
door Foot valve conforming to IS 4038 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete - 80mm dia.

31.48.11D Providing and fixing C.I. swing type single Each 5,755.12
door Foot valve conforming to IS 4038 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete - 100mm dia.

31.48.11E Providing and fixing C.I. swing type single Each 9,349.12
door Foot valve conforming to IS 4038 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete - 125mm dia.

31.48.11F Providing and fixing C.I. swing type single Each 10,395.00
door Foot valve (PN 1) conforming to IS
4038 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 150mm dia.

31.48.11G Providing and fixing C.I. swing type single Each 24,601.03
door Foot valve (PN 1) conforming to IS
4038 and ISI marked, with bolts, nuts,
rubber insertion etc.,complete (the tail
pieces if required will be paid separately)
- 200mm dia.

31.48.11H Providing and fixing C.I. swing type single Each 30,052.91
door Foot valve conforming to IS 4038 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete - 250mm dia.

31.48.11I Providing and fixing C.I. swing type single Each 45,228.88
door Foot valve conforming to IS 4038 and
ISI marked, with bolts, nuts, rubber
insertion etc.,complete - 300mm dia.

31.50.2 Constructing masonry Chamber 30 x 30 x 50 each 1,143.71


cm, inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for stop cock, with C.I.
surface box 100 x 100 x 75 mm (inside) with

Puducherry Region
31. Water Supply (Public Health)
Page No.: 489
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

hinged cover fixed in cement concrete slab


1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
necessary excavation foundation concrete
1:5:10 (1 cement :5 fine sand : 10 graded
stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design -
with brick class designation 35.

31.51.2 Constructing masonry Chamber 60 x 60 x 75 each 6,914.99


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter 160 mm
bottom diameter and 180 mm deep (inside)
with chained lid and R.C.C. top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded
stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design -
with brick class designation 35.

31.52.2 Constructing masonry Chamber 90 x 90 x100 each 11,995.24


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter 160 mm
bottom diameter and 180 mm deep (inside)
with chained lid and R.C.C. top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded
stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design -
with brick class designation 35.

31.53.2 Constructing masonry Chamber 120x120x100cm each 16,624.23


inside with 35 class designation brick work
in cement mortar 1:4 (1 cement : 4 coarse
sand) for sluice valve, with C.I. surface

Puducherry Region
31. Water Supply (Public Health)
Page No.: 490
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

box 100mm top diameter 160mm bottom


diameter and 180mm deep (inside) with
chained lid and R.C.C top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) necessary
excavation foundation concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone
aggregate 40mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement
: 3 coarse sand) 12mm thick finished with a
floating coat of neat cement complete as
per standard design - with bricks class
designation 35

31.54.2 Constructing masonry Chamber 60 x 60 x 75 each 6,583.64


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for fire hydrants, with C.I.
surface box 350 x 550 mm top and 165 mm
deep (inside) with chained lid and R.C.C.
top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size) necessary excavation,
foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse
sand) 12 mm thick finished with a floating
coat of neat cement complete as per
standard design - with brick class
designation 35

31.55.2 Constructing masonry chamber 60 x 45 x 50 each 6,311.27


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for water meter complete, with
C.I. double flap surface box 400 x 200 x
200 mm (inside) with locking arrangement
and R.C.C. top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20
mm nominal size) necessary excavation,
foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size) and inside plastering with
cement mortar 1:3 (1 cement : 3 course
sand) 12 mm thick finished with a floating
coat of neat cement complete as per
standard design - with brick class
designation 35

31.77.1 Repainting G.I.pipes and fittings with metre 5.41


white paint of approved quality - 15 mm

Puducherry Region
31. Water Supply (Public Health)
Page No.: 491
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

diameter pipe.

31.77.2 Repainting G.I.pipes and fittings with metre 6.31


white paint of approved quality - 20 mm
diameter pipe

31.77.3 Repainting G.I.pipes and fittings with metre 8.00


white paint of approved quality - 25 mm
diameter pipe

31.77.4 Repainting G.I.pipes and fittings with metre 9.45


white paint of approved quality - 32 mm
diameter pipe

31.77.5 Repainting G.I.pipes and fittings with metre 10.97


white paint of approved quality - 40 mm
diameter pipe

31.77.6 Repainting G.I.pipes and fittings with metre 12.91


white paint of approved quality - 50 mm
diameter pipe

31.77.7 Repainting G.I.pipes and fittings with metre 16.08


white paint of approved quality - 65 mm
diameter pipe

31.77.8 Repainting G.I.pipes and fittings with metre 19.33


white paint of approved quality - 80 mm
diameter pipe

31.77.9 Repainting G.I.pipes and fittings with metre 23.60


white paint of approved quality - 100 mm
diameter pipe

31.77.10 Repainting G.I.pipes and fittings with metre 28.50


white paint of approved quality - 125 mm
diameter pipe

31.77.11 Repainting G.I.pipes and fittings with metre 33.39


white paint of approved quality - 150 mm
diameter pipe

31.78.1 Painting G.I. pipes and fittings with two metre 6.41
coats of anti-corrosive bitumastic paint of
approved quality - 15 mm diameter pipe.

31.78.2 Painting G.I. pipes and fittings with two metre 7.61
coats of anti-corrosive bitumastic paint of
approved quality - 20 mm diameter pipe.

31.78.3 Painting G.I. pipes and fittings with two metre 9.70
coats of anti-corrosive bitumastic paint of

Puducherry Region
31. Water Supply (Public Health)
Page No.: 492
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

approved quality - 25 mm diameter pipe.

31.78.4 Painting G.I. pipes and fittings with two metre 11.61
coats of anti-corrosive bitumastic paint of
approved quality - 32mm diameter pipe.

31.78.5 Painting G.I. pipes and fittings with two metre 13.22
coats of anti-corrosive bitumastic paint of
approved quality - 40 mm diameter pipe.

31.78.6 Painting G.I. pipes and fittings with two metre 15.83
coats of anti-corrosive bitumastic paint of
approved quality - 50 mm diameter pipe.

31.78.7 Painting G.I. pipes and fittings with two metre 19.56
coats of anti-corrosive bitumastic paint of
approved quality - 65 mm diameter pipe.

31.78.8 Painting G.I. pipes and fittings with two metre 22.69
coats of anti-corrosive bitumastic paint of
approved quality - 80 mm diameter pipe.

31.78.9 Painting G.I. pipes and fittings with two metre 27.84
coats of anti-corrosive bitumastic paint of
approved quality - 100 mm diameter pipe.

31.78.10 Painting G.I. pipes and fittings with two metre 34.28
coats of anti-corrosive bitumastic paint of
approved quality - 125 mm diameter pipe.

31.78.11 Painting G.I. pipes and fittings with two metre 40.38
coats of anti-corrosive bitumastic paint of
approved quality - 150 mm diameter pipe.

31.79 Providing and filling sand of grading zone cum 1,593.61


V or coarser grade alround the G.I. pipes
in external work.

31.79.1 Providing and filling sand of grading zone metre 117.93


V or coarser grade alround the G.I. pipes
in external work - 15 mm diameter pipe.

31.79.2 Providing and filling sand of grading zone metre 119.52


V or coarser grade alround the G.I. pipes
in external work - 20 mm diameter pipe.

31.79.3 Providing and filling sand of grading zone metre 122.71


V or coarser grade alround the G.I. pipes
in external work - 25 mm diameter pipe.

31.79.4 Providing and filling sand of grading zone metre 125.90


V or coarser grade alround the G.I. pipes

Puducherry Region
31. Water Supply (Public Health)
Page No.: 493
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

in external work - 32mm diameter pipe.

31.79.5 Providing and filling sand of grading zone metre 127.49


V or coarser grade alround the G.I. pipes
in external work - 40 mm diameter pipe.

31.79.6 Providing and filling sand of grading zone metre 132.27


V or coarser grade alround the G.I. pipes
in external work - 50 mm diameter pipe.

31.79.7 Providing and filling sand of grading zone metre 208.76


V or coarser grade alround the G.I. pipes
in external work - 65 mm diameter pipe.

31.79.8 Providing and filling sand of grading zone metre 215.14


V or coarser grade alround the G.I. pipes
in external work - 80 mm diameter pipe.

31.79.9 Providing and filling sand of grading zone metre 227.89


V or coarser grade alround
the G.I. pipes external work - 100 mm dia
pipe.

31.79.10 Providing and filling sand of grading zone metre 339.44


V or coarser grade alround
the G.I. pipes external work - 125 mm dia
pipe.

31.79.11 Providing and filling sand of grading zone metre 450.99


V or coarser grade alround
the G.I. pipes external work - 150 mm dia
pipe.

31.83.1 Boring with 100 mm diameter casing pipe for metre 324.60
hand pump/tube well in all soils except
ordinary hard rocks requiring blasting
including removing the casing pipe after
the hand pipe/tube well is lowered and
tested - upto 6 metre depth.

31.83.2 Boring with 100 mm diameter casing pipe for metre 385.08
hand pump/tube well in all soils except
ordinary hard rocks requiring blasting
including removing the casing pipe after
the hand pipe/tube well is lowered and
tested - beyond 6 m and upto 12 m depth.

31.83.3 Boring with 100 mm diameter casing pipe for metre 447.93
hand pump/tube well in all soils except
ordinary hard rocks requiring blasting
including removing the casing pipe after
the hand pipe/tube well is lowered and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 494
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

tested - beyond 12 m and upto 18 m depth.

31.84 Providing and placing in position filter of metre 565.29


40 mm diameter G.I. pipe with brass
strainer of approved quality.

31.85 Providing and fixing to filter and lowering metre 541.86


to proper level 40 mm G.I. pipe for
tubewell including cleaning and priming the
tubewell.

31.86 Providing and placing in position hand pump each 1,764.45


of approved quality for 40 mm diameter G.I.
pipe complete with all accessories.

31.120.1A Providing and laying Ductile Iron socket metre 1,236.91


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -100mm dia.

31.120.1B Providing and laying Ductile Iron socket metre 1,809.11


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -150mm dia.

31.120.1C Providing and laying Ductile Iron socket metre 2,338.12


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 495
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked suitable for tyton /push on joints


in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -200mm dia.

31.120.1D Providing and laying Ductile Iron socket metre 3,090.82


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -250mm dia.

31.120.1E Providing and laying Ductile Iron socket metre 3,920.73


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -300mm dia.

31.120.1F Providing and laying Ductile Iron socket metre 4,919.34


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the

Puducherry Region
31. Water Supply (Public Health)
Page No.: 496
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

trenches, laying to proper grade and


alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -350mm dia.

31.120.1G Providing and laying Ductile Iron socket metre 5,922.82


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -400mm dia.

31.120.1H Providing and laying Ductile Iron socket metre 6,599.91


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -450mm dia.

31.120.1I Providing and laying Ductile Iron socket metre 8,155.70


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth

Puducherry Region
31. Water Supply (Public Health)
Page No.: 497
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

work and jointing of pipes with rubber


gasket will be paid separately) -500mm dia.

31.120.1J Providing and laying Ductile Iron socket metre 10,758.59


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -600mm dia.

31.120.1K Providing and laying Ductile Iron socket metre 14,413.21


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -700mm dia.

31.120.1L Providing and laying Ductile Iron socket metre 16,507.14


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -750mm dia.

31.120.1M Providing and laying Ductile Iron socket metre 19,269.13


and spigot pipes of class K7 (Electro

Puducherry Region
31. Water Supply (Public Health)
Page No.: 498
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -800mm dia.

31.120.1N Providing and laying Ductile Iron socket metre 22,976.79


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji) conforming to IS specification
8329/2000 and ISI marked suitable for tyton
/push on joints in good condition including
transportation of D.I.pipe from production
centre/company to the site at Puducherry,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment etc.,complete
all as per IS 12288 and CPWD specification.
(earth work and jointing of pipes with
rubber gasket will be paid separately)
-900mm dia.

31.120.1O Providing and laying Ductile Iron socket metre 27,009.48


and spigot pipes of class K7 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji) conforming to IS specification
8329/2000 and ISI marked suitable for tyton
/push on joints in good condition including
transportation of D.I.pipe from production
centre/company to the site at Puducherry,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment etc.,complete
all as per IS 12288 and CPWD specification.
(earth work and jointing of pipes with
rubber gasket will be paid separately)
-1000mm dia.

31.121.1A Providing and laying Ductile Iron socket metre 1,389.74


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints

Puducherry Region
31. Water Supply (Public Health)
Page No.: 499
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

in good condition including transportation


of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -100mm dia.

31.121.1B Providing and laying Ductile Iron socket metre 2,073.22


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -150mm dia.

31.121.1C Providing and laying Ductile Iron socket metre 2,715.09


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -200mm dia.

31.121.1D Providing and laying Ductile Iron socket metre 3,569.67


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 500
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

alignment, testing of joints with required


testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -250mm dia.

31.121.1E Providing and laying Ductile Iron socket metre 4,521.41


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -300mm dia.

31.121.1F Providing and laying Ductile Iron socket metre 5,655.38


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -350mm dia.

31.121.1G Providing and laying Ductile Iron socket metre 6,794.16


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber

Puducherry Region
31. Water Supply (Public Health)
Page No.: 501
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

gasket will be paid separately) -400mm dia.

31.121.1H Providing and laying Ductile Iron socket metre 7,774.81


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -450mm dia.

31.121.1I Providing and laying Ductile Iron socket metre 9,378.32


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -500mm dia.

31.121.1J Providing and laying Ductile Iron socket metre 12,409.12


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -600mm dia.

31.121.1K Providing and laying Ductile Iron socket metre 15,827.90


and spigot pipes of class K9 (Electro

Puducherry Region
31. Water Supply (Public Health)
Page No.: 502
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -700mm dia.

31.121.1L Providing and laying Ductile Iron socket metre 17,817.05


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -750mm dia.

31.121.1M Providing and laying Ductile Iron socket metre 20,029.31


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji / TATA Metaliks Kubota) conforming
to IS specification 8329/2000 and ISI
marked suitable for tyton /push on joints
in good condition including transportation
of D.I.pipe from production centre/company
to the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 12288 and CPWD specification. (earth
work and jointing of pipes with rubber
gasket will be paid separately) -800mm dia.

31.121.1N Providing and laying Ductile Iron socket metre 24,105.34


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji) conforming to IS specification
8329/2000 and ISI marked suitable for tyton
/push on joints in good condition including
transportation of D.I.pipe from production

Puducherry Region
31. Water Supply (Public Health)
Page No.: 503
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

centre/company to the site at Puducherry,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment etc.,complete
all as per IS 12288 and CPWD specification.
(earth work and jointing of pipes with
rubber gasket will be paid separately)
-900mm dia.

31.121.1O Providing and laying Ductile Iron socket metre 28,383.47


and spigot pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm / Jai
Balaji) conforming to IS specification
8329/2000 and ISI marked suitable for tyton
/push on joints in good condition including
transportation of D.I.pipe from production
centre/company to the site at Puducherry,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment etc.,complete
all as per IS 12288 and CPWD specification.
(earth work and jointing of pipes with
rubber gasket will be paid separately)
-1000mm dia.

31.122.1A Providing and laying Ductile Iron Double metre 2,677.32


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -100mm
dia.

31.122.1B Providing and laying Ductile Iron Double metre 3,700.04


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 504
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

alignment, testing of joints with required


testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -150mm
dia.

31.122.1C Providing and laying Ductile Iron Double metre 5,061.50


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -200mm
dia.

31.122.1D Providing and laying Ductile Iron Double metre 6,712.71


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -250mm
dia.

31.122.1E Providing and laying Ductile Iron Double metre 8,405.97


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required

Puducherry Region
31. Water Supply (Public Health)
Page No.: 505
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

testing equipment etc.,complete all as per


IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -300mm
dia.

31.122.1F Providing and laying Ductile Iron Double metre 10,380.88


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -350mm
dia.

31.122.1G Providing and laying Ductile Iron Double metre 13,223.81


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm/Electrother
m) conforming to IS specification
8329/2000 and ISI marked suitable for
flanged joints in good condition including
transportation of D.I.pipe from production
centre/company to the site at Puducherry,
lowering to the trenches(or fixing in over
head tanks above ground level) laying to
proper grade and alignment, testing of
joints with required testing equipment
etc.,complete all as per IS12288 and CPWD
specification . (earth work and jointing of
pipes with rubber insertion will be paid
separately) -400mm dia.

31.122.1H Providing and laying Ductile Iron Double metre 15,893.81


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per

Puducherry Region
31. Water Supply (Public Health)
Page No.: 506
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

IS12288 and CPWD specification . (earth


work and jointing of pipes with rubber
insertion will be paid separately) -450mm
dia.

31.122.1I Providing and laying Ductile Iron Double metre 19,394.58


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -500mm
dia.

31.122.1J Providing and laying Ductile Iron Double metre 25,124.97


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -600mm
dia.

31.122.1K Providing and laying Ductile Iron Double metre 35,673.08


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth

Puducherry Region
31. Water Supply (Public Health)
Page No.: 507
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

work and jointing of pipes with rubber


insertion will be paid separately) -700mm
dia.

31.122.1L Providing and laying Ductile Iron Double metre 43,515.12


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -800mm
dia.

31.122.1M Providing and laying Ductile Iron Double metre 57,153.61


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -900mm
dia.

31.122.1N Providing and laying Ductile Iron Double metre 67,272.70


flanged pipes of class K9 (Electro
steel/Lanco/Jindal/Electrotherm) conforming
to IS specification 8329/2000 and ISI
marked suitable for flanged joints in good
condition including transportation of
D.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS12288 and CPWD specification . (earth
work and jointing of pipes with rubber

Puducherry Region
31. Water Supply (Public Health)
Page No.: 508
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

insertion will be paid separately) -1000mm


dia.

31.123.1A Providing and fixing in position S&S kg 118.51


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 100 to 300mm dia.

31.123.1B Providing and fixing in position S&S kg 149.86


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 350 to 450mm dia.

31.123.1C Providing and fixing in position S&S kg 159.50


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 500 to 600mm dia.

31.123.1D Providing and fixing in position S&S kg 186.03


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 700 to 800mm dia.

31.123.1E Providing and fixing in position S&S kg 186.03


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 900mm dia.

31.123.1F Providing and fixing in position S&S kg 194.57


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked -1000mm dia.

31.124.1A Providing and fixing in position flanged kg 149.86


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 100 to 300mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 509
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.124.1B Providing and fixing in position flanged kg 183.61


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 350 to 450mm dia.

31.124.1C Providing and fixing in position flanged kg 198.08


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 500 to 600mm dia.

31.124.1D Providing and fixing in position flanged kg 220.99


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 700 to 800mm dia.

31.124.1E Providing and fixing in position flanged kg 223.40


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 900mm dia.

31.124.1F Providing and fixing in position flanged kg 223.40


standard D.I. specials (Electro
steel/Lanco/Jindal/Kiswok) such as tees,
bends, collors, tapers, caps etc.conforming
to IS specification 9523/2000 and ISI
marked - 1000mm dia.

31.124.2A Providing and fixing D.I. each 6,340.69


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete - 80 mm dia.

31.124.2B Providing and fixing D.I. Each 7,208.81


MJ collar coupling , with bolts, nuts,
rubber insertion etc.,complete - 100 mm
dia.

31.124.2C Providing and fixing D.I. Each 12,099.65


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete - 150 mm
dia.

31.124.2D Providing and fixing D.I. Each 15,120.68


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete - 200 mm

Puducherry Region
31. Water Supply (Public Health)
Page No.: 510
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

dia.

31.124.2E Providing and fixing D.I. Each 22,086.91


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete - 250 mm
dia.

31.124.2F Providing and fixing D.I. Each 27,306.71


MJ collar coupling , with bolts, nuts,
rubber insertion etc.,complete - 300 mm
dia.

31.124.2G Providing and fixing D.I. Each 44,035.89


MJ collar coupling , with bolts, nuts,
rubber insertion etc.,complete - 350 mm
dia.

31.124.2H Providing and fixing D.I. Each 47,057.07


MJ collar coupling , with bolts, nuts,
rubber insertion etc.,complete - 400 mm
dia.

31.124.2I Providing and fixing D.I. Each 54,456.21


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete - 450 mm
dia.

31.124.2J Providing and fixing D.I. Each 66,011.58


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete - 500 mm
dia.

31.124.2K Providing and fixing D.I. Each 81,091.75


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete -600 mm dia.

31.124.2L Providing and fixing D.I. Each 1,44,561.25


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete -700
mm dia.

31.124.2M Providing and fixing D.I. Each 1,63,275.76


MJ collar coupling, with bolts, nuts,
rubber insertion etc.,complete -750
mm dia.

31.124.2N Providing and fixing D.I. Each 1,85,931.05


MJ collar coupling ISI marked, with bolts,
nuts, rubber insertion etc.,complete -800
mm dia.

31.124.2O Providing and fixing D.I. Each 2,16,066.64

Puducherry Region
31. Water Supply (Public Health)
Page No.: 511
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

MJ collar coupling, with bolts, nuts,


rubber insertion etc.,complete -900
mm dia.

31.124.2P Providing and fixing D.I. Each 2,42,936.10


MJ collar coupling ISI marked, with bolts,
nuts, rubber insertion etc.,complete -1000
mm dia.

31.124.3A Providing and fixing D.I. flange adaptor Each 4,002.53


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -80
mm dia.

31.124.3B Providing and fixing D.I. flange adaptor Each 5,322.59


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -100
mm dia.

31.124.3C Providing and fixing D.I. flange adaptor Each 7,773.65


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -150
mm dia.

31.124.3D Providing and fixing D.I. flange adaptor Each 10,211.38


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -200
mm dia.

31.124.3E Providing and fixing D.I. flange adaptor Each 13,911.36


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -250
mm dia.

31.124.3F Providing and fixing D.I. flange adaptor Each 16,786.81


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -300
mm dia.

31.124.3G Providing and fixing D.I. flange adaptor Each 26,457.10


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -350
mm dia.

31.124.3H Providing and fixing D.I. flange adaptor Each 30,104.15


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -400
mm dia.

31.124.3I Providing and fixing D.I. flange adaptor Each 36,220.95


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -450

Puducherry Region
31. Water Supply (Public Health)
Page No.: 512
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

mm dia.

31.124.3J Providing and fixing D.I. flange adaptor Each 45,090.04


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -500
mm dia.

31.124.3K Providing and fixing D.I. flange adaptor Each 58,178.32


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -600
mm dia.

31.124.4A Providing and fixing D.I. dismantling joint Each 7,944.18


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -80
mm dia.

31.124.4B Providing and fixing D.I. dismantling joint Each 9,698.45


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -100
mm dia.

31.124.4C Providing and fixing D.I. dismantling joint Each 14,275.83


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -150
mm dia.

31.124.4D Providing and fixing D.I. dismantling joint Each 19,310.27


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -200
mm dia.

31.124.4E Providing and fixing D.I. dismantling joint Each 26,669.53


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -250
mm dia.

31.124.4F Providing and fixing D.I. dismantling joint Each 31,867.64


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -300
mm dia.

31.124.4G Providing and fixing D.I. dismantling joint Each 46,949.92


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -350
mm dia.

31.124.4H Providing and fixing D.I. dismantling joint Each 58,642.03


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -400
mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 513
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.124.4I Providing and fixing D.I. dismantling joint Each 70,598.49


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -450
mm dia.

31.124.4J Providing and fixing D.I. dismantling joint Each 88,057.86


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -500
mm dia.

31.124.4K Providing and fixing D.I. dismantling joint Each 1,19,397.25


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -600
mm dia.

31.124.4L Providing and fixing D.I. dismantling joint Each 1,78,098.46


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -700
mm dia.

31.124.4M Providing and fixing D.I. dismantling joint Each 2,03,031.63


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -750
mm dia.

31.124.4N Providing and fixing D.I. dismantling joint Each 2,34,644.81


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -800
mm dia.

31.124.4O Providing and fixing D.I. dismantling joint Each 2,74,543.66


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -900
mm dia.

31.124.4P Providing and fixing D.I. dismantling joint Each 3,55,178.49


ISI marked, with bolts, nuts, rubber
insertion etc.,complete -1000
mm dia.

31.125.1A Providing and laying S&S Centrifugally metre 1,383.25


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 514
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

jointing of pipes with rubber gasket will


be paid separately) -80mm dia.

31.125.1B Providing and laying S&S Centrifugally metre 1,674.83


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -100mm dia.

31.125.1C Providing and laying S&S Centrifugally metre 2,169.92


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -125mm dia.

31.125.1D Providing and laying S&S Centrifugally metre 2,654.69


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -150mm dia.

31.125.1E Providing and laying S&S Centrifugally metre 3,884.56


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable

Puducherry Region
31. Water Supply (Public Health)
Page No.: 515
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

for tyton /push on joints in good condition


including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -200mm dia.

31.125.1F Providing and laying S&S Centrifugally metre 5,234.84


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -250mm dia.

31.125.1G Providing and laying S&S Centrifugally metre 6,749.50


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -300mm dia.

31.125.1H Providing and laying S&S Centrifugally metre 8,503.55


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114

Puducherry Region
31. Water Supply (Public Health)
Page No.: 516
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and CPWD specification . (earth work and


jointing of pipes with rubber gasket will
be paid separately) -350mm dia.

31.125.1I Providing and laying S&S Centrifugally metre 10,349.19


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -400mm dia.

31.125.1J Providing and laying S&S Centrifugally metre 12,479.83


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -450mm dia.

31.125.1K Providing and laying S&S Centrifugally metre 14,608.95


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -500mm dia.

31.125.1L Providing and laying S&S Centrifugally metre 19,384.33


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS

Puducherry Region
31. Water Supply (Public Health)
Page No.: 517
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

specification 1536 and ISI marked suitable


for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -600mm dia.

31.125.1M Providing and laying S&S Centrifugally metre 25,113.94


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -700mm dia.

31.125.1N Providing and laying S&S Centrifugally metre 28,206.68


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -750mm dia.

31.125.1O Providing and laying S&S Centrifugally metre 32,130.90


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing

Puducherry Region
31. Water Supply (Public Health)
Page No.: 518
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

equipment etc.,complete all as per IS 3114


and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -800mm dia.

31.125.1P Providing and laying S&S Centrifugally metre 38,754.27


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -900mm dia.

31.125.1Q Providing and laying S&S Centrifugally metre 45,810.99


(spun) Cast iron pipe class LA (Electro
steel/Lanco/Jindal) conforming to IS
specification 1536 and ISI marked suitable
for tyton /push on joints in good condition
including transportation of C.I.pipe from
production centre/company to the site at
Puducherry, lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment etc.,complete all as per IS 3114
and CPWD specification . (earth work and
jointing of pipes with rubber gasket will
be paid separately) -1000mm dia.

31.126.1A Providing and laying non standard S&S kg 97.89


Centrifugally (spun) Cast iron pipe
suitable for tyton /push on joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete. (earth
work and jointing of pipes will be paid
separately) -80 to 200mm dia.

31.126.1B Providing and laying non standard S&S kg 113.57


Centrifugally (spun) Cast iron pipe
suitable for tyton /push on joints in good
condition including transportation of
C.I.pipe from production centre/company to

Puducherry Region
31. Water Supply (Public Health)
Page No.: 519
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the site at Puducherry, lowering to the


trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete . (earth
work and jointing of pipes will be paid
separately)-250 to 400mm dia.

31.126.1C Providing and laying non standard S&S kg 125.63


Centrifugally (spun) Cast iron pipe
suitable for tyton /push on joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete . (earth
work and jointing of pipes will be paid
separately)- 450 to 750mm dia.

31.126.1D Providing and laying non standard S&S kg 126.83


Centrifugally (spun) Cast iron pipe
suitable for tyton /push on joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches, laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete . (earth
work and jointing of pipes will be paid
separately)- 800 to 1000mm dia.

31.127.1A Providing and fixing in position S&S kg 97.89


standard C.I. specials(Electro
steel/Lanco/Jindal) such as tees, bends,
collors, tapers, caps etc.conforming to IS
specification 1538 and ISI marked - 80 to
200mm dia.

31.127.1B Providing and fixing in position S&S kg 113.57


standard C.I. specials(Electro
steel/Lanco/Jindal) such as tees, bends,
collors, tapers, caps etc.conforming to IS
specification 1538 and ISI marked - 250 to
400mm dia.

31.127.1C Providing and fixing in position S&S kg 124.41


standard C.I. specials (Electro
steel/Lanco/Jindal) such as tees, bends,
collors, tapers, caps etc.conforming to IS
specification 1538 and ISI marked - 450 to
750mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 520
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.127.1D Providing and fixing in position S&S kg 126.83


standard C.I. specials (Electro
steel/Lanco/Jindal) such as tees, bends,
collors, tapers, caps etc.conforming to IS
specification 1538 and ISI marked - 800 to
1000mm dia.

31.128.1A Providing and laying Cast Iron Double metre 2,739.76


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -80mm
dia.

31.128.1B Providing and laying Cast Iron Double metre 3,404.42


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -100mm
dia.

31.128.1C Providing and laying Cast Iron Double metre 5,540.73


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber

Puducherry Region
31. Water Supply (Public Health)
Page No.: 521
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

insertion will be paid separately) -150mm


dia.

31.128.1D Providing and laying Cast Iron Double metre 7,929.18


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -200mm
dia.

31.128.1E Providing and laying Cast Iron Double metre 10,660.01


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -250mm
dia.

31.128.1F Providing and laying Cast Iron Double metre 13,674.22


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -300mm
dia.

31.128.1G Providing and laying Cast Iron Double metre 19,572.15

Puducherry Region
31. Water Supply (Public Health)
Page No.: 522
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

flanged pipe conforming to IS


specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -350mm
dia.

31.128.1H Providing and laying Cast Iron Double metre 23,899.01


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -400mm
dia.

31.128.1I Providing and laying Cast Iron Double metre 29,159.39


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -450mm
dia.

31.128.1J Providing and laying Cast Iron Double metre 36,182.87


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of

Puducherry Region
31. Water Supply (Public Health)
Page No.: 523
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

C.I.pipe from production centre/company to


the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -500mm
dia.

31.128.1K Providing and laying Cast Iron Double metre 48,633.82


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -600mm
dia.

31.128.1L Providing and laying Cast Iron Double metre 63,655.86


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and
alignment, testing of joints with required
testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -700mm
dia.

31.128.1M Providing and laying Cast Iron Double metre 72,206.12


flanged pipe conforming to IS
specification 1537&7181 and ISI marked
suitable for flanged joints in good
condition including transportation of
C.I.pipe from production centre/company to
the site at Puducherry, lowering to the
trenches(or fixing in over head tanks above
ground level) laying to proper grade and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 524
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

alignment, testing of joints with required


testing equipment etc.,complete all as per
IS 3114 and CPWD specification . (earth
work and jointing of pipes with rubber
insertion will be paid separately) -750mm
dia.

31.129.1A Providing and laying non standard Cast Iron kg 158.18


Double flanged pipes suitable for flanged
joints in good condition including
transportation of C.I.pipe from production
centre/company to the site at Puducherry,
lowering to the trenches(or fixing in over
head tanks above ground level) laying to
proper grade and alignment, testing of
joints with required testing equipment
etc.,complete (earth work and jointing of
pipes with rubber insertion will be paid
separately) -80 to 200mm dia.

31.129.1B Providing and laying non standard Cast Iron kg 167.82


Double flanged pipes suitable for flanged
joints in good condition including
transportation of C.I.pipe from production
centre/company to the site at Puducherry,
lowering to the trenches(or fixing in over
head tanks above ground level) laying to
proper grade and alignment, testing of
joints with required testing equipment
etc.,complete(earth work and jointing of
pipes with rubber insertion will be paid
separately) -250 to 400mm dia.

31.129.1C Providing and laying non standard Cast Iron kg 178.67


Double flanged pipes suitable for flanged
joints in good condition including
transportation of C.I.pipe from production
centre/company to the site at Puducherry,
lowering to the trenches(or fixing in over
head tanks above ground level) laying to
proper grade and alignment, testing of
joints with required testing equipment
etc.,complete (earth work and jointing of
pipes with rubber insertion will be paid
separately) -450 to 750mm dia.

31.130.1A Providing and laying in position flanged kg 171.56


C.I. specials such as tees, bends, collors,
tapers, caps etc.conforming to IS
specification 1538 and ISI marked - 80 to
200mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 525
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.130.1B Providing and laying in position flanged kg 183.61


C.I. specials such as tees, bends, collors,
tapers, caps etc.conforming to IS
specification 1538 and ISI marked - 250 to
400mm dia.

31.130.1C Providing and laying in position flanged kg 188.44


C.I. specials such as tees, bends, collors,
tapers, caps etc.conforming to IS
specification 1538 and ISI marked - 450 to
750mm dia.

31.131.1A Providing and fixing Cast iron flanges each 529.28


conforming to IS specification 1538 and ISI
marked. - 80 mm dia.

31.131.1B Providing and fixing Cast iron flanges each 625.73


conforming to IS specification 1538 and ISI
marked. - 100 mm dia.

31.131.1C Providing and fixing Cast iron flanges each 769.80


conforming to IS specification 1538 and ISI
marked. - 150 mm dia.

31.131.1D Providing and fixing Cast iron flanges each 962.70


conforming to IS specification 1538 and ISI
marked. - 200 mm dia.

31.131.1E Providing and fixing Cast iron flanges each 1,309.32


conforming to IS specification 1538 and ISI
marked. - 250 mm dia.

31.131.1F Providing and fixing Cast iron flanges each 1,650.51


conforming to IS specification 1538 and ISI
marked. - 300 mm dia.

31.131.1G Providing and fixing Cast iron flanges each 2,150.26


conforming to IS specification 1538 and ISI
marked. - 350 mm dia.

31.131.1H Providing and fixing Cast iron flanges each 2,729.57


conforming to IS specification 1538 and ISI
marked. - 400 mm dia.

31.131.1I Providing and fixing Cast iron flanges each 3,348.66


conforming to IS specification 1538 and ISI
marked. - 450 mm dia.

31.131.1J Providing and fixing Cast iron flanges each 3,786.31


conforming to IS specification 1538 and ISI
marked. - 500 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 526
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.131.1K Providing and fixing Cast iron flanges each 4,774.94


conforming to IS specification 1538 and ISI
marked. - 600 mm dia.

31.131.1L Providing and fixing Cast iron flanges each 6,406.16


conforming to IS specification 1538 and ISI
marked. - 700 mm dia.

31.131.1M Providing and fixing Cast iron flanges each 8,713.14


conforming to IS specification 1538 and ISI
marked. - 750 mm dia.

31.131.1N Providing and fixing Cast iron flanges each 10,073.09


conforming to IS specification 1538 and ISI
marked. - 800 mm dia.

31.131.2A Threading of CI / DI pipes suitable for no 206.77


fixing flanges including
transportation,labour charges
etc.,complete - 80 mm dia.

31.131.2B Threading of CI / DI pipes suitable for no 259.51


fixing flanges including
transportation,labour charges
etc.,complete - 100 mm dia.

31.131.2C Threading of CI / DI pipes suitable for no 516.92


fixing flanges including
transportation,labour charges
etc.,complete - 150 mm dia.

31.131.2D Threading of CI / DI pipes suitable for no 603.43


fixing flanges including
transportation,labour charges
etc.,complete - 200 mm dia.

31.131.2E Threading of CI / DI pipes suitable for no 776.43


fixing flanges including
transportation,labour charges
etc.,complete - 250 mm dia.

31.131.2F Threading of CI / DI pipes suitable for no 1,035.94


fixing flanges including
transportation,labour charges
etc.,complete - 300 mm dia.

31.131.2G Threading of CI / DI pipes suitable for no 1,122.45


fixing flanges including
transportation,labour charges
etc.,complete - 350 mm dia.

31.131.2H Threading of CI / DI pipes suitable for no 1,293.35

Puducherry Region
31. Water Supply (Public Health)
Page No.: 527
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

fixing flanges including


transportation,labour charges
etc.,complete - 400 mm dia.

31.131.2I Threading of CI / DI pipes suitable for no 1,466.35


fixing flanges including
transportation,labour charges
etc.,complete - 450 mm dia.

31.131.2J Threading of CI / DI pipes suitable for no 1,795.49


fixing flanges including
transportation,labour charges
etc.,complete - 500 mm dia.

31.131.2K Threading of CI / DI pipes suitable for no 1,989.60


fixing flanges including
transportation,labour charges
etc.,complete - 600 mm dia.

31.131.2L Threading of CI / DI pipes suitable for no 2,242.79


fixing flanges including
transportation,labour charges
etc.,complete - 700 mm dia.

31.131.2M Threading of CI / DI pipes suitable for no 2,299.76


fixing flanges including
transportation,labour charges
etc.,complete - 750 mm dia.

31.131.2N Threading of CI / DI pipes suitable for no 2,415.80


fixing flanges including
transportation,labour charges
etc.,complete - 800 mm dia.

31.134.1A Providing and jointing cast iron / D.I. no 69.33


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-80mm dia.

31.134.1B Providing and jointing cast iron / D.I. no 79.57


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-100mm dia.

31.134.1C Providing and jointing cast iron / D.I. no 103.99


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost

Puducherry Region
31. Water Supply (Public Health)
Page No.: 528
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of fixing,testing the joints etc.,complete


-150mm dia.

31.134.1D Providing and jointing cast iron / D.I. no 150.71


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-200mm dia.

31.134.1E Providing and jointing cast iron / D.I. no 197.43


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-250mm dia.

31.134.1F Providing and jointing cast iron / D.I. no 244.15


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-300mm dia.

31.134.1G Providing and jointing cast iron / D.I. no 296.89


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-350mm dia.

31.134.1H Providing and jointing cast iron / D.I. no 380.98


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-400mm dia.

31.134.1I Providing and jointing cast iron / D.I. no 445.79


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-450mm dia.

31.134.1J Providing and jointing cast iron / D.I. no 529.89


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-500mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 529
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.134.1K Providing and jointing cast iron / D.I. no 657.07


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-600mm dia.

31.134.1L Providing and jointing cast iron / D.I. no 799.95


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-700mm dia.

31.134.1M Providing and jointing cast iron / D.I. no 973.25


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-750mm dia.

31.134.1N Providing and jointing cast iron / D.I. no 1,105.57


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-800mm dia.

31.134.1O Providing and jointing cast iron / D.I. no 1,208.66


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-900mm dia.

31.134.1P Providing and jointing cast iron / D.I. no 1,514.28


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS 5382 &
12820 of SBR quality including the cost
of fixing,testing the joints etc.,complete
-1000mm dia.

31.135.1A Providing and jointing cast iron / D.I. no 75.36


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -80mm dia.

31.135.1B Providing and jointing cast iron / D.I. no 91.62


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382

Puducherry Region
31. Water Supply (Public Health)
Page No.: 530
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and 12820 of EPDM quality including the


cost of fixing,testing the joints
etc.,complete -100mm dia.

31.135.1C Providing and jointing cast iron / D.I. no 118.45


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -150mm dia.

31.135.1D Providing and jointing cast iron / D.I. no 173.62


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -200mm dia.

31.135.1E Providing and jointing cast iron / D.I. no 236.01


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -250mm dia.

31.135.1F Providing and jointing cast iron / D.I. no 308.05


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -300mm dia.

31.135.1G Providing and jointing cast iron / D.I. no 351.13


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -350mm dia.

31.135.1H Providing and jointing cast iron / D.I. no 470.20


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -400mm dia.

31.135.1I Providing and jointing cast iron / D.I. no 519.33


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -450mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 531
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.135.1J Providing and jointing cast iron / D.I. no 635.98


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -500mm dia.

31.135.1K Providing and jointing cast iron / D.I. no 860.82


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -600mm dia.

31.135.1L Providing and jointing cast iron / D.I. no 1,240.01


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -700mm dia.

31.135.1M Providing and jointing cast iron / D.I. no 1,421.75


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -750mm dia.

31.135.1N Providing and jointing cast iron / D.I. no 1,551.65


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -800mm dia.

31.135.1O Providing and jointing cast iron / D.I. no 1,705.38


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -900mm dia.

31.135.1P Providing and jointing cast iron / D.I. no 2,193.06


(S&S) pipe joints with rubber gasket
(Tyton joints) conforming to IS No. 5382
and 12820 of EPDM quality including the
cost of fixing,testing the joints
etc.,complete -1000mm dia.

31.136.1A Providing, laying and jointing G.I pipes of metre 240.28


medium class (blue)
(TATA,TNT,Nezone,Apollo,Zenith) conforming

Puducherry Region
31. Water Supply (Public Health)
Page No.: 532
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

to IS specification 1239 part I and ISI


marked including transportation to the
site , lowering to the trenches, laying to
proper grade and alignment, testing of
joints with required testing
equipment,including GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -15mm dia

31.136.1B Providing, laying and jointing G.I pipes of metre 301.05


medium class (blue)
(TATA,TNT,Nezone,Apollo,Zenith) conforming
to IS specification 1239 part I and ISI
marked including transportation to the
site , lowering to the trenches, laying to
proper grade and alignment, testing of
joints with required testing
equipment,including GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -20mm dia

31.136.1C Providing, laying and jointing G.I pipes of metre 412.45


medium class (blue)
(TATA,TNT,Nezone,Apollo,Zenith) conforming
to IS specification 1239 part I and ISI
marked including transportation to the
site , lowering to the trenches, laying to
proper grade and alignment, testing of
joints with required testing
equipment,including GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -25mm dia

31.136.1D Providing, laying and jointing G.I pipes of metre 421.38


medium class (blue)
(TATA,TNT,Nezone,Apollo,Zenith) conforming
to IS specification 1239 part I and ISI
marked including transportation to the
site , lowering to the trenches, laying to
proper grade and alignment, testing of
joints with required testing
equipment,including GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -32mm dia

31.136.1E Providing, laying and jointing G.I pipes of metre 520.11


medium class (blue)
(TATA,TNT,Nezone,Apollo,Zenith) conforming

Puducherry Region
31. Water Supply (Public Health)
Page No.: 533
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

to IS specification 1239 part I and ISI


marked including transportation to the
site , lowering to the trenches, laying to
proper grade and alignment, testing of
joints with required testing
equipment,including GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -40mm dia

31.136.1F Providing, laying and jointing G.I pipes of metre 646.69


medium class
(blue)(TATA,TNT,Nezone,Apollo,Zenith)
conforming to IS specification 1239 part I
and ISI marked including transportation
to the site , lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment,including GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -50mm dia

31.136.1G Providing, laying and jointing G.I pipes of metre 940.46


medium class
(blue)(TATA,TNT,Nezone,Apollo,Zenith)
conforming to IS specification 1239 part I
and ISI marked including transportation
to the site , lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment,including GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -65mm dia

31.136.1H Providing, laying and jointing G.I pipes of metre 1,169.00


medium class
(blue)(TATA,TNT,Nezone,Apollo,Zenith)
conforming to IS specification 1239 part I
and ISI marked including transportation
to the site , lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment,excluding GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -80mm dia

31.136.1I Providing, laying and jointing G.I pipes of metre 1,646.42


medium class
(blue)(TATA,TNT,Nezone,Apollo,Zenith)

Puducherry Region
31. Water Supply (Public Health)
Page No.: 534
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

conforming to IS specification 1239 part I


and ISI marked including transportation
to the site , lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment,excluding GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -100mm dia

31.136.1J Providing, laying and jointing G.I pipes of metre 2,417.54


medium class
(blue)(TATA,TNT,Nezone,Apollo,Zenith)
conforming to IS specification 1239 part I
and ISI marked including transportation
to the site , lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment,excluding GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -125mm dia

31.136.1K Providing, laying and jointing G.I pipes of metre 2,728.59


medium class
(blue)(TATA,TNT,Nezone,Apollo,Zenith)
conforming to IS specification 1239 part I
and ISI marked including transportation
to the site , lowering to the trenches,
laying to proper grade and alignment,
testing of joints with required testing
equipment,excluding GI specials such as
bends,tees, elbow,coupling,reducer
etc.,complete all as per IS and CPWD
specification. -150mm dia

31.137.1A Providing and fixing in position G.I. no 80.19


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
15mm dia.

31.137.1B Providing and fixing in position G.I. no 97.06


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
20mm dia.

31.137.1C Providing and fixing in position G.I. no 116.04


equal Tee (UNIQUE/R Brand/HB Brand/UI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 535
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Brand)conforming to IS 1239 part II and ISI


marked,including labour charges for
jointing,jointing materials etc,complete-
25mm dia.

31.137.1D Providing and fixing in position G.I. no 166.67


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
32mm dia.

31.137.1E Providing and fixing in position G.I. no 232.69


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
40mm dia.

31.137.1F Providing and fixing in position G.I. no 268.85


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
50mm dia.

31.137.1G Providing and fixing in position G.I. no 446.69


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
65mm dia.

31.137.1H Providing and fixing in position G.I. no 930.75


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
80mm dia.

31.137.1I Providing and fixing in position G.I. no 1,118.83


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
100mm dia.

31.137.1J Providing and fixing in position G.I. no 2,485.43


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-

Puducherry Region
31. Water Supply (Public Health)
Page No.: 536
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

125mm dia.

31.137.1K Providing and fixing in position G.I. no 2,823.31


equal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
150mm dia.

31.138.1A Providing and fixing in position G.I. no 118.45


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
25 x 20 mm dia.

31.138.1B Providing and fixing in position G.I. no 182.35


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32x 20 mm dia.

31.138.1C Providing and fixing in position G.I. no 189.58


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32x 25 mm dia.

31.138.1D Providing and fixing in position G.I. no 220.63


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40 x 20 mm dia.

31.138.1D1 Providing and fixing in position G.I. no 220.63


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40 x 25 mm dia.

31.138.1E Providing and fixing in position G.I. no 220.63


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40 x 32 mm dia.

31.138.1F Providing and fixing in position G.I. no 307.14

Puducherry Region
31. Water Supply (Public Health)
Page No.: 537
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

unequal Tee (UNIQUE/R Brand/HB Brand/UI


Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50 x 20 mm dia.

31.138.1F1 Providing and fixing in position G.I. no 310.76


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50 x 25 mm dia.

31.138.1G Providing and fixing in position G.I. no 310.76


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50 x 32 mm dia.

31.138.1H Providing and fixing in position G.I. no 310.76


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50 x 40 mm dia.

31.138.1I Providing and fixing in position G.I. no 491.31


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
65 x 20 mm dia.

31.138.1I1 Providing and fixing in position G.I. no 491.31


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
65 x 25 mm dia.

31.138.1J Providing and fixing in position G.I. no 491.31


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
65 x 32 mm dia.

31.138.1K Providing and fixing in position G.I. no 491.31


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for

Puducherry Region
31. Water Supply (Public Health)
Page No.: 538
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

jointing, jointing materials etc,complete -


65 x 40 mm dia.

31.138.1L Providing and fixing in position G.I. no 491.31


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
65 x 50 mm dia.

31.138.1M Providing and fixing in position G.I. no 722.18


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
80 x 32 mm dia.

31.138.1N Providing and fixing in position G.I. no 722.18


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
80 x 40 mm dia.

31.138.1O Providing and fixing in position G.I. no 722.18


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
80 x 50 mm dia.

31.138.1P Providing and fixing in position G.I. no 722.18


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
80 x 65 mm dia.

31.138.1Q Providing and fixing in position G.I. no 1,142.94


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
100 x 40 mm dia.

31.138.1R Providing and fixing in position G.I. no 1,148.97


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
100 x 50 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 539
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.138.1S Providing and fixing in position G.I. no 1,155.00


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
100 x 65 mm dia.

31.138.1T Providing and fixing in position G.I. no 1,167.05


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
100 x 80 mm dia.

31.138.1U Providing and fixing in position G.I. no 3,751.34


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
125 x 40 mm dia.

31.138.1V Providing and fixing in position G.I. no 3,751.34


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
125 x 50 mm dia.

31.138.1W Providing and fixing in position G.I. no 3,751.34


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
125 x 65 mm dia.

31.138.1X Providing and fixing in position G.I. no 3,751.34


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
125 x 80 mm dia.

31.138.1Y Providing and fixing in position G.I. no 3,751.34


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
125 x 100 mm dia.

31.138.1Z Providing and fixing in position G.I. no 4,286.95


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 540
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
150 x 50 mm dia.

31.138.2A Providing and fixing in position G.I. no 4,286.95


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
150 x 65 mm dia.

31.138.2B Providing and fixing in position G.I. no 4,286.95


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
150 x 80 mm dia.

31.138.2C Providing and fixing in position G.I. no 4,289.36


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
150 x 100 mm dia.

31.138.2D Providing and fixing in position G.I. no 4,289.36


unequal Tee (UNIQUE/R Brand/HB Brand/UI
Brand)conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
150 x 125 mm dia.

31.139.1A Providing and fixing in position G.I. no 98.86


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
15 mm dia.

31.139.1B Providing and fixing in position G.I. no 122.97


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
20 mm dia.

31.139.1C Providing and fixing in position G.I. no 168.49


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
25 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 541
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.139.1D Providing and fixing in position G.I. no 241.43


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
32 mm dia.

31.139.1E Providing and fixing in position G.I. no 270.07


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
40 mm dia.

31.139.1F Providing and fixing in position G.I. no 386.71


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
50 mm dia.

31.139.1G Providing and fixing in position G.I. no 666.12


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
65 mm dia.

31.139.1H Providing and fixing in position G.I. no 940.40


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
80 mm dia.

31.139.1I Providing and fixing in position G.I. no 1,260.50


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
100 mm dia.

31.139.1J Providing and fixing in position G.I. no 2,690.38


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete-
125 mm dia.

31.139.1K Providing and fixing in position G.I. no 4,402.69


union (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 542
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing,jointing materials etc,complete-
150 mm dia.

31.140.1A Providing and fixing in position G.I. no 82.89


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
25 x 20 mm dia.

31.140.1B Providing and fixing in position G.I. no 119.66


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
32 x 20 mm dia.

31.140.1C Providing and fixing in position G.I. no 123.27


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
32 x 25 mm dia.

31.140.1D Providing and fixing in position G.I. no 137.44


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
40 x 20 mm dia.

31.140.1D1 Providing and fixing in position G.I. no 143.47


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
40 x 25 mm dia.

31.140.1E Providing and fixing in position G.I. no 143.47


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
40 x 32 mm dia.

31.140.1F Providing and fixing in position G.I. no 175.72


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
50 x 20 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 543
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.140.1F1 Providing and fixing in position G.I. no 178.13


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
50 x 25 mm dia.

31.140.1G Providing and fixing in position G.I. no 181.75


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
50 x 32 mm dia.

31.140.1H Providing and fixing in position G.I. no 181.75


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
50 x 40 mm dia.

31.140.1I Providing and fixing in position G.I. no 285.14


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
65 x 20 mm dia.

31.140.1J Providing and fixing in position G.I. no 285.14


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
65 x 32 mm dia.

31.140.1K Providing and fixing in position G.I. no 285.14


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
65 x 40 mm dia.

31.140.1L Providing and fixing in position G.I. no 285.14


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
65 x 50 mm dia.

31.140.1M Providing and fixing in position G.I. no 391.83


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 544
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete-
80 x 32 mm dia.

31.140.1N Providing and fixing in position G.I. no 391.83


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
80 x 40 mm dia.

31.140.1O Providing and fixing in position G.I. no 391.83


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
80 x 50 mm dia.

31.140.1P Providing and fixing in position G.I. no 393.04


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
80 x 65 mm dia.

31.140.1Q Providing and fixing in position G.I. no 603.43


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
100 x 40 mm dia.

31.140.1R Providing and fixing in position G.I. no 603.43


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
100 x 50 mm dia.

31.140.1S Providing and fixing in position G.I. no 603.43


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
100 x 65 mm dia.

31.140.1T Providing and fixing in position G.I. no 609.45


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
100 x 80 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 545
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.140.1U Providing and fixing in position G.I. no 2,027.29


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
125 x 50 mm dia.

31.140.1V Providing and fixing in position G.I. no 2,027.29


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
125 x 65 mm dia.

31.140.1W Providing and fixing in position G.I. no 2,051.40


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
125 x 80 mm dia.

31.140.1X Providing and fixing in position G.I. no 2,051.40


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
125 x 100 mm dia.

31.140.1Y Providing and fixing in position G.I. no 2,732.88


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
150 x 50 mm dia.

31.140.1Z Providing and fixing in position G.I. no 2,732.88


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
150 x 65 mm dia.

31.140.2A Providing and fixing in position G.I. no 2,738.91


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
150 x 80 mm dia.

31.140.2B Providing and fixing in position G.I. no 2,743.74


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 546
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete-
150 x 100 mm dia.

31.140.2C Providing and fixing in position G.I. no 2,743.74


reducer (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete-
150 x 125 mm dia.

31.141.1 Providing and fixing in position G.I. no 65.10


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
15 mm dia.

31.141.1A Providing and fixing in position G.I. no 78.37


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
20 mm dia.

31.141.1B Providing and fixing in position G.I. no 94.95


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
25 mm dia.

31.141.1C Providing and fixing in position G.I. no 144.98


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32 mm dia.

31.141.1D Providing and fixing in position G.I. no 178.43


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40 mm dia.

31.141.1E Providing and fixing in position G.I. no 226.36


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 547
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.141.1F Providing and fixing in position G.I. no 402.09


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
65 mm dia.

31.141.1G Providing and fixing in position G.I. no 509.98


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
80 mm dia.

31.141.1H Providing and fixing in position G.I. no 925.34


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
100 mm dia.

31.141.1I Providing and fixing in position G.I. no 2,921.87


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
125 mm dia.

31.141.1J Providing and fixing in position G.I. no 4,149.51


elbow (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
150 mm dia.

31.142.1A Providing and fixing in position G.I. no 94.95


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
25 x 20 mm dia.

31.142.1B Providing and fixing in position G.I. no 142.56


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
32 x 20 mm dia.

31.142.1C Providing and fixing in position G.I. no 142.56


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 548
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

ISI marked,including labour charges for


jointing,jointing materials etc,complete -
32 x 25 mm dia.

31.142.1D Providing and fixing in position G.I. no 173.62


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
40 x 20 mm dia.

31.142.1D1 Providing and fixing in position G.I. no 179.64


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
40 x 25 mm dia.

31.142.1E Providing and fixing in position G.I. no 180.85


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
40 x 32 mm dia.

31.142.1F Providing and fixing in position G.I. no 226.36


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
50 x 20 mm dia.

31.142.1F1 Providing and fixing in position G.I. no 229.98


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
50 x 25 mm dia.

31.142.1G Providing and fixing in position G.I. no 236.01


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
50 x 32 mm dia.

31.142.1H Providing and fixing in position G.I. no 236.01


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
50 x 40 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 549
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.142.1I Providing and fixing in position G.I. no 408.11


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
65 x 20 mm dia.

31.142.1I1 Providing and fixing in position G.I. no 416.55


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
65 x 25 mm dia.

31.142.1J Providing and fixing in position G.I. no 416.55


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
65 x 32 mm dia.

31.142.1K Providing and fixing in position G.I. no 416.55


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
65 x 40 mm dia.

31.142.1L Providing and fixing in position G.I. no 416.55


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
65 x 50 mm dia.

31.142.1M Providing and fixing in position G.I. no 516.01


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
80 x 32 mm dia.

31.142.1N Providing and fixing in position G.I. no 516.01


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
80 x 40 mm dia.

31.142.1O Providing and fixing in position G.I. no 530.48


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 550
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

ISI marked,including labour charges for


jointing,jointing materials etc,complete -
80 x 50 mm dia.

31.142.1P Providing and fixing in position G.I. no 530.48


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
80 x 65 mm dia.

31.142.1Q Providing and fixing in position G.I. no 949.45


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
100 x 40 mm dia.

31.142.1R Providing and fixing in position G.I. no 949.45


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
100 x 50 mm dia.

31.142.1S Providing and fixing in position G.I. no 949.45


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
100 x 65 mm dia.

31.142.1T Providing and fixing in position G.I. no 949.45


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
100 x 80 mm dia.

31.142.1U Providing and fixing in position G.I. no 2,865.20


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
125 x 50 mm dia.

31.142.1V Providing and fixing in position G.I. no 2,865.20


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
125 x 65 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 551
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.142.1W Providing and fixing in position G.I. no 2,871.23


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
125 x 80 mm dia.

31.142.1X Providing and fixing in position G.I. no 2,871.23


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
125 x 100 mm dia.

31.142.1Y Providing and fixing in position G.I. no 3,594.92


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
150 x 50 mm dia.

31.142.1Z Providing and fixing in position G.I. no 3,606.97


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
150 x 65 mm dia.

31.142.2A Providing and fixing in position G.I. no 3,606.97


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
150 x 80 mm dia.

31.142.2B Providing and fixing in position G.I. no 3,626.25


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
150 x 100 mm dia.

31.142.2C Providing and fixing in position G.I. no 3,631.08


reducer elbow (UNIQUE/R Brand/HB Brand/UI
Brand) conforming to IS 1239 part II and
ISI marked,including labour charges for
jointing,jointing materials etc,complete -
150 x 125 mm dia.

31.143.1A Providing and fixing in position G.I. Hex no 64.51


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 552
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing,jointing materials etc,complete -
15 mm dia.

31.143.1B Providing and fixing in position G.I. Hex no 80.78


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
20 mm dia.

31.143.1C Providing and fixing in position G.I. Hex no 100.98


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
25 mm dia.

31.143.1D Providing and fixing in position G.I. Hex no 143.77


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
32 mm dia.

31.143.1E Providing and fixing in position G.I. Hex no 161.55


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
40 mm dia.

31.143.1F Providing and fixing in position G.I. Hex no 214.31


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
50 mm dia.

31.143.1G Providing and fixing in position G.I. Hex no 381.59


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
65 mm dia.

31.143.1H Providing and fixing in position G.I. Hex no 578.71


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
80 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 553
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.143.1I Providing and fixing in position G.I. Hex no 968.73


nipple (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
100 mm dia.

31.144.1A Providing and fixing in position G.I. bend no 74.75


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
15 mm dia.

31.144.1B Providing and fixing in position G.I. bend no 104.89


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
20 mm dia.

31.144.1C Providing and fixing in position G.I. bend no 131.12


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
25 mm dia.

31.144.1D Providing and fixing in position G.I. bend no 171.50


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
32 mm dia.

31.144.1E Providing and fixing in position G.I. bend no 233.89


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
40 mm dia.

31.144.1F Providing and fixing in position G.I. bend no 308.35


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
50 mm dia.

31.144.1G Providing and fixing in position G.I. bend no 429.82


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 554
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing,jointing materials etc,complete -
65 mm dia.

31.144.1H Providing and fixing in position G.I. bend no 636.57


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
80 mm dia.

31.144.1I Providing and fixing in position G.I. bend no 1,113.41


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
100 mm dia.

31.144.1J Providing and fixing in position G.I. bend no 1,749.99


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
125 mm dia.

31.144.1K Providing and fixing in position G.I. bend no 2,473.67


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
150 mm dia.

31.145.1A Providing and fixing in position G.I. no 63.90


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
15 mm dia.

31.145.1B Providing and fixing in position G.I. no 77.17


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
20 mm dia.

31.145.1C Providing and fixing in position G.I. no 87.71


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
25 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 555
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.145.1D Providing and fixing in position G.I. no 117.24


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
32 mm dia.

31.145.1E Providing and fixing in position G.I. no 131.41


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
40 mm dia.

31.145.1F Providing and fixing in position G.I. no 186.58


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
50 mm dia.

31.145.1G Providing and fixing in position G.I. no 279.11


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
65 mm dia.

31.145.1H Providing and fixing in position G.I. no 391.83


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
80 mm dia.

31.145.1I Providing and fixing in position G.I. no 626.34


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
100 mm dia.

31.145.1J Providing and fixing in position G.I. no 1,074.83


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
125 mm dia.

31.145.1K Providing and fixing in position G.I. no 1,195.69


coupling (UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 556
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing,jointing materials etc,complete -
150 mm dia.

31.146.1A Providing and fixing in position G.I. plug no 33.76


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
15 mm dia.

31.146.1B Providing and fixing in position G.I. plug no 39.79


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
20 mm dia.

31.146.1C Providing and fixing in position G.I. plug no 50.34


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
25 mm dia.

31.146.1D Providing and fixing in position G.I. plug no 84.40


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32 mm dia.

31.146.1E Providing and fixing in position G.I. plug no 92.54


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40 mm dia.

31.146.1F Providing and fixing in position G.I. plug no 116.65


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50 mm dia.

31.146.1G Providing and fixing in position G.I. plug no 151.31


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
65 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 557
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.146.1H Providing and fixing in position G.I. plug no 194.11


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
80 mm dia.

31.146.1I Providing and fixing in position G.I. plug no 235.71


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
100 mm dia.

31.146.1J Providing and fixing in position G.I. plug no 396.06


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
125 mm dia.

31.146.1K Providing and fixing in position G.I. plug no 629.64


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
150 mm dia.

31.147.1A Providing and fixing in position G.I. cap no 34.96


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
15 mm dia.

31.147.1B Providing and fixing in position G.I. cap no 42.19


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
20 mm dia.

31.147.1C Providing and fixing in position G.I. cap no 51.55


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
25 mm dia.

31.147.1D Providing and fixing in position G.I. cap no 82.28


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 558
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing,jointing materials etc,complete -
32 mm dia.

31.147.1E Providing and fixing in position G.I. cap no 102.48


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
40 mm dia.

31.147.1F Providing and fixing in position G.I. cap no 119.06


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
50 mm dia.

31.147.1G Providing and fixing in position G.I. cap no 159.75


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
65 mm dia.

31.147.1H Providing and fixing in position G.I. cap no 182.05


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
80 mm dia.

31.147.1I Providing and fixing in position G.I. cap no 239.32


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
100 mm dia.

31.147.1J Providing and fixing in position G.I. cap no 417.76


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
125 mm dia.

31.147.1K Providing and fixing in position G.I. cap no 639.28


(UNIQUE/R Brand/HB Brand/UI Brand)
conforming to IS 1239 part II and ISI
marked,including labour charges for
jointing,jointing materials etc,complete -
150 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 559
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.148.1A Providing and fixing in position G.I. pipe no 65.10


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -15 mm dia.

31.148.1B Providing and fixing in position G.I. pipe no 77.17


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -20 mm dia.

31.148.1B1 Providing and fixing in position G.I. pipe no 90.42


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -25 mm dia.

31.148.1C Providing and fixing in position G.I. pipe no 113.63


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -32 mm dia.

31.148.1D Providing and fixing in position G.I. pipe no 124.18


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -40 mm dia.

31.148.1E Providing and fixing in position G.I. pipe no 141.97


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -50 mm dia.

31.148.1F Providing and fixing in position G.I. pipe no 188.69


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -65 mm dia.

31.148.1G Providing and fixing in position G.I. pipe no 235.10


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -80 mm dia.

31.148.1H Providing and fixing in position G.I. pipe no 332.16


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -100 mm dia.

31.148.1I Providing and fixing in position G.I. pipe no 490.10


nipple 10cm long, including labour charges
for jointing,jointing materials
etc,complete -125 mm dia.

31.148.1J Providing and fixing in position G.I. pipe no 544.65


nipple 10cm long, including labour charges

Puducherry Region
31. Water Supply (Public Health)
Page No.: 560
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

for jointing,jointing materials


etc,complete -150 mm dia.

31.149.1A Providing and fixing in position G.I. pipe no 74.75


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -15 mm dia.

31.149.1B Providing and fixing in position G.I. pipe no 92.84


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -20 mm dia.

31.149.1B1 Providing and fixing in position G.I. pipe no 110.92


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -25 mm dia.

31.149.1C Providing and fixing in position G.I. pipe no 131.71


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -32 mm dia.

31.149.1D Providing and fixing in position G.I. pipe no 149.50


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -40 mm dia.

31.149.1E Providing and fixing in position G.I. pipe no 175.72


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -50 mm dia.

31.149.1F Providing and fixing in position G.I. pipe no 242.94


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -65 mm dia.

31.149.1G Providing and fixing in position G.I. pipe no 311.06


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -80 mm dia.

31.149.1H Providing and fixing in position G.I. pipe no 455.13


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -100 mm dia.

31.149.1I Providing and fixing in position G.I. pipe no 546.77


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -125 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 561
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.149.1J Providing and fixing in position G.I. pipe no 701.39


nipple 15cm long, including labour charges
for jointing, jointing materials
etc,complete -150 mm dia.

31.150.1A Providing and fixing in position G.I. pipe no 77.17


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -15 mm dia.

31.150.1B Providing and fixing in position G.I. pipe no 113.33


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -20 mm dia.

31.150.1B1 Providing and fixing in position G.I. pipe no 147.08


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -25 mm dia.

31.150.1C Providing and fixing in position G.I. pipe no 171.50


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -32 mm dia.

31.150.1D Providing and fixing in position G.I. pipe no 185.67


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -40 mm dia.

31.150.1E Providing and fixing in position G.I. pipe no 232.39


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -50 mm dia.

31.150.1F Providing and fixing in position G.I. pipe no 321.31


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -65 mm dia.

31.150.1G Providing and fixing in position G.I. pipe no 418.36


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -80 mm dia.

31.150.1H Providing and fixing in position G.I. pipe no 527.47


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -100 mm dia.

31.150.1I Providing and fixing in position G.I. pipe no 646.83


nipple 23cm long, including labour charges

Puducherry Region
31. Water Supply (Public Health)
Page No.: 562
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

for jointing, jointing materials


etc,complete -125 mm dia.

31.150.1J Providing and fixing in position G.I. pipe no 773.73


nipple 23cm long, including labour charges
for jointing, jointing materials
etc,complete -150 mm dia.

31.151.1A Providing and fixing in position G.I. pipe no 110.92


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -15 mm dia.

31.151.1B Providing and fixing in position G.I. pipe no 136.24


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -20 mm dia.

31.151.1B1 Providing and fixing in position G.I. pipe no 177.23


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -25 mm dia.

31.151.1C Providing and fixing in position G.I. pipe no 204.05


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -32 mm dia.

31.151.1D Providing and fixing in position G.I. pipe no 230.28


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -40 mm dia.

31.151.1E Providing and fixing in position G.I. pipe no 308.35


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -50 mm dia.

31.151.1F Providing and fixing in position G.I. pipe no 417.76


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -65 mm dia.

31.151.1G Providing and fixing in position G.I. pipe no 520.84


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -80 mm dia.

31.151.1H Providing and fixing in position G.I. pipe no 822.85


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -100 mm dia.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 563
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.151.1I Providing and fixing in position G.I. pipe no 920.51


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -125 mm dia.

31.151.1J Providing and fixing in position G.I. pipe no 1,169.17


nipple 30cm long, including labour charges
for jointing, jointing materials
etc,complete -150 mm dia.

31.151.2A Proviing and fixing ferrule coforming to IS no 795.72


2692 and ISI marked along with test
cetificate,including labour charges for
drilling,cutting,threading,fixing in
distribution pipes etc.,complete -15mm dia

31.151.2B Proviing and fixing ferrule coforming to IS no 853.59


2692 and ISI marked along with test
cetificate,including labour charges for
drilling,cutting,threading,fixing in
distribution pipes etc.,complete -20mm dia

31.151.2C Proviing and fixing ferrule coforming to IS no 983.80


2692 and ISI marked along with test
cetificate,including labour charges for
drilling,cutting,threading,fixing in
distribution pipes etc.,complete -25mm dia

31.152.1A Providing and fixing mild steel bracket no 467.43


including bolts,nuts,rubber insertion,
labour charges etc,complete-40 x 20mm dia

31.152.1B Providing and fixing mild steel bracket no 479.48


including bolts,nuts,rubber insertion,
labour charges etc,complete-50 x 20mm dia

31.152.1C Providing and fixing mild steel bracket no 517.69


including bolts,nuts,rubber insertion,
labour charges etc,complete-65 x 20mm dia

31.152.1D Providing and fixing mild steel bracket no 532.16


including bolts,nuts,rubber
insertion,labour charges etc,complete-65 x
40mm dia

31.152.1E Providing and fixing mild steel bracket no 691.31


including bolts,nuts,rubber insertion,
labour charges etc,complete-65 x 50mm dia

31.152.1F Providing and fixing mild steel bracket no 765.58


including bolts,nuts,rubber insertion,
labour charges etc,complete-80 x 20mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 564
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.152.1G Providing and fixing mild steel bracket no 769.20


including bolts,nuts,rubber insertion,
labour charges etc,complete-80 x 40mm dia

31.152.1H Providing and fixing mild steel bracket no 734.47


including bolts,nuts,rubber insertion,
labour charges etc,complete-80 x 50mm dia

31.152.1I Providing and fixing mild steel bracket no 800.42


including bolts,nuts,rubber insertion,
labour charges etc,complete-80 x 65mm dia

31.152.1J Providing and fixing mild steel bracket no 826.94


including bolts,nuts,rubber insertion,
labour charges etc,complete-100 x 20mm dia

31.152.1K Providing and fixing mild steel bracket no 844.67


including bolts,nuts,rubber insertion,
labour charges etc,complete-100 x 40mm dia

31.152.1L Providing and fixing mild steel bracket no 844.67


including bolts,nuts,rubber insertion,
labour charges etc,complete-100 x 50mm dia

31.152.1M Providing and fixing mild steel bracket no 863.84


including bolts,nuts,rubber insertion,
labour charges etc,complete-100 x 65mm dia

31.152.1N Providing and fixing mild steel bracket no 863.84


including bolts,nuts,rubber insertion,
labour charges etc,complete-100 x 80mm dia

31.152.1O Providing and fixing mild steel bracket no 983.20


including bolts,nuts,rubber insertion,
labour charges etc,complete-125 x 20mm dia

31.152.1P Providing and fixing mild steel bracket no 1,015.99


including bolts,nuts,rubber insertion,
labour charges etc,complete-125 x40mm dia

31.152.1Q Providing and fixing mild steel bracket no 1,015.99


including bolts,nuts,rubber insertion,
labour charges etc,complete-125 x 50mm dia

31.152.1R Providing and fixing mild steel bracket no 1,056.50


including bolts,nuts,rubber insertion,
labour charges etc,complete-125 x 65mm dia

31.152.1S Providing and fixing mild steel bracket no 1,056.50


including bolts,nuts,rubber insertion,
labour charges etc,complete-125 x 80mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 565
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.152.1T Providing and fixing mild steel bracket no 1,114.01


including bolts,nuts,rubber insertion,
labour charges etc,complete-125 x 100mm dia

31.152.1U Providing and fixing mild steel bracket no 1,163.92


including bolts,nuts,rubber insertion,
labour charges etc,complete-150 x 65mm dia

31.152.1V Providing and fixing mild steel bracket no 1,163.92


including bolts,nuts,rubber insertion,
labour charges etc,complete-150 x 80mm dia

31.152.1W Providing and fixing mild steel bracket no 1,274.97


including bolts,nuts,rubber insertion,
labour charges etc,complete-150 x 100mm dia

31.152.1X Providing and fixing mild steel bracket no 1,335.25


including bolts,nuts,rubber insertion,
labour charges etc,complete-150 x 125mm dia

31.152.1Y Providing and fixing mild steel bracket no 1,379.86


including bolts,nuts,rubber insertion,
labour charges etc,complete-200 x 65mm dia

31.152.1Z Providing and fixing mild steel bracket no 1,379.86


including bolts,nuts,rubber insertion,
labour charges etc,complete-200 x 80mm dia

31.152.2A Providing and fixing mild steel bracket no 1,462.44


including bolts,nuts,rubber insertion,
labour charges etc,complete-200 x 100mm dia

31.152.2B Providing and fixing mild steel bracket no 1,462.44


including bolts,nuts,rubber insertion,
labour charges etc,complete-200 x 125mm dia

31.152.2C Providing and fixing mild steel bracket no 1,631.23


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 65mm dia

31.152.2D Providing and fixing mild steel bracket no 1,631.23


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 80mm dia

31.152.2E Providing and fixing mild steel bracket no 1,708.99


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 100mm dia

31.152.2F Providing and fixing mild steel bracket no 1,708.99


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 125mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 566
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.152.2G Providing and fixing mild steel bracket no 1,796.40


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 150mm dia

31.152.2H Providing and fixing mild steel bracket no 2,067.66


including bolts,nuts,rubber insertion,
labour charges etc,complete-300 x 65mm dia

31.152.2I Providing and fixing mild steel bracket no 2,067.66


including bolts,nuts,rubber insertion,
labour charges etc,complete-300 x 80mm dia

31.152.2J Providing and fixing mild steel bracket no 2,158.10


including bolts,nuts,rubber insertion,
labour charges etc,complete-300 x 100mm dia

31.152.2K Providing and fixing mild steel bracket no 2,158.10


including bolts,nuts,rubber insertion,
labour charges etc,complete-300 x 125mm dia

31.152.2L Providing and fixing mild steel bracket No 889.40


including bolts,nuts,rubber insertion,
labour charges etc,complete-150 x 20mm dia.

31.152.2M Providing and fixing mild steel bracket No 889.40


including bolts,nuts,rubber insertion,
labour charges etc,complete-150 x 40mm dia

31.152.2N Providing and fixing mild steel bracket No 889.40


including bolts,nuts,rubber insertion,
labour charges etc,complete-150 x 50mm dia

31.152.2O Providing and fixing mild steel bracket No 1,241.21


including bolts,nuts,rubber insertion,
labour charges etc,complete-200 x 20mm dia

31.152.2P Providing and fixing mild steel bracket No 1,241.21


including bolts,nuts,rubber insertion,
labour charges etc,complete-200 x 40mm dia

31.152.2Q Providing and fixing mild steel bracket No 1,241.21


including bolts,nuts,rubber insertion,
labour charges etc,complete-200 x 50mm dia

31.152.2R Providing and fixing mild steel bracket No 1,450.38


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 20mm dia

31.152.2S Providing and fixing mild steel bracket No 1,450.38


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 40mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 567
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.152.2T Providing and fixing mild steel bracket No 1,450.38


including bolts,nuts,rubber insertion,
labour charges etc,complete-250 x 50mm dia

31.152.2U Providing and fixing mild steel bracket No 1,675.84


including bolts,nuts,rubber insertion,
labour charges etc,complete-300 x 20mm dia

31.152.2V Providing and fixing mild steel bracket No 1,675.84


including bolts,nuts,rubber insertion,
labour charges etc,complete-300 x 40mm dia

31.152.2W Providing and fixing mild steel bracket No 1,675.84


including bolts,nuts,rubber insertion,
labour charges etc,complete-300 x 50mm dia

31.153.1A Providing and fixing mild steel flange no 388.94


including bolts,nuts,rubber insertion,
labour charges etc,complete-40mm dia

31.153.1B Providing and fixing mild steel flange no 408.24


including bolts,nuts,rubber insertion,
labour charges etc,complete-50mm dia

31.153.1C Providing and fixing mild steel flange no 503.60


including bolts,nuts,rubber insertion,
labour charges etc,complete-65mm dia

31.153.1D Providing and fixing mild steel flange no 588.83


including bolts,nuts,rubber insertion,
labour charges etc,complete-80mm dia

31.153.1E Providing and fixing mild steel flange no 774.63


including bolts,nuts,rubber insertion,
labour charges etc,complete-100mm dia

31.153.1F Providing and fixing mild steel flange no 1,414.83


including bolts,nuts,rubber insertion,
labour charges etc,complete-125mm dia

31.153.1G Providing and fixing mild steel flange no 1,733.35


including bolts,nuts,rubber insertion,
labour charges etc,complete-150mm dia

31.154.1A Providing and fixing reducing mild steel no 1,020.58


flange including necessary
bolts,nuts,rubber insertion, labour charges
etc,complete-100 x 80mm dia

31.154.1B Providing and fixing reducing mild steel no 1,390.71


flange including necessary

Puducherry Region
31. Water Supply (Public Health)
Page No.: 568
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

bolts,nuts,rubber insertion, labour charges


etc,complete-125 x 80mm dia

31.154.1C Providing and fixing reducing mild steel no 1,390.71


flange including necessary
bolts,nuts,rubber insertion, labour charges
etc,complete-125 x 100mm dia

31.154.1D Providing and fixing reducing mild steel no 1,745.41


flange including necessary
bolts,nuts,rubber insertion, labour charges
etc,complete-150 x 80mm dia

31.154.1E Providing and fixing reducing mild steel no 1,745.41


flange including necessary
bolts,nuts,rubber insertion, labour charges
etc,complete-150 x 100mm dia

31.154.1F Providing and fixing reducing mild steel no 1,745.41


flange including necessary
bolts,nuts,rubber insertion, labour charges
etc,complete-150 x 125mm dia

31.160.1A Providing, laying and jointing UPVC metre 27.56


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 20mm dia.

31.160.1B Providing, laying and jointing UPVC metre 37.24


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 25mm dia.

31.160.1C Providing, laying and jointing UPVC metre 58.41


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 569
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 32mm dia.

31.160.1D Providing, laying and jointing UPVC metre 83.10


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 40mm dia.

31.160.1E Providing, laying and jointing UPVC metre 126.68


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 50mm dia.

31.160.1F Providing, laying and jointing UPVC metre 193.57


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 63mm dia.

31.160.1G Providing, laying and jointing UPVC metre 270.15


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 570
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 75mm dia.

31.160.1H Providing, laying and jointing UPVC metre 382.61


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excludingUPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 90mm dia.

31.160.1I Providing, laying and jointing UPVC metre 538.80


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 110mm dia.

31.160.1J Providing, laying and jointing UPVC metre 862.88


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 140mm dia.

31.160.1K Providing, laying and jointing UPVC metre 847.20


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 571
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 160mm dia.

31.160.1L Providing, laying and jointing UPVC metre 1,451.53


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 180mm dia.

31.160.1M Providing, laying and jointing UPVC metre 1,789.11


pipes(Finolex/Jain) (1 Mpa)conforming to IS
specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 200mm dia.

31.161.1A Providing, laying and jointing UPVC metre 58.60


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 40mm dia.

31.161.1B Providing, laying and jointing UPVC metre 83.64


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 572
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 50mm dia.

31.161.1C Providing, laying and jointing UPVC metre 123.18


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 63mm dia.

31.161.1D Providing, laying and jointing UPVC metre 167.93


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 75mm dia.

31.161.1E Providing, laying and jointing UPVC metre 226.90


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 90mm dia.

31.161.1F Providing, laying and jointing UPVC metre 323.96


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 573
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 110mm dia.

31.161.1G Providing, laying and jointing UPVC metre 529.70


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 140mm dia.

31.161.1H Providing, laying and jointing UPVC metre 676.24


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 160mm dia.

31.161.1I Providing, laying and jointing UPVC metre 848.71


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 180mm dia.

31.161.1J Providing, laying and jointing UPVC metre 1,076.57


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 574
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 200mm dia.

31.161.1K Providing, laying and jointing UPVC metre 918.64


pipes(Finolex/Jain) (0.6 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement, excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 250mm dia.

31.162.1A Providing, laying and jointing UPVC metre 87.23


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 63mm dia.

31.162.1B Providing, laying and jointing UPVC metre 118.88


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,UPVC specials such as
bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 75mm dia.

31.162.1C Providing, laying and jointing UPVC metre 160.23


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 575
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 90mm dia.

31.162.1D Providing, laying and jointing UPVC metre 222.92


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 110mm dia.

31.162.1E Providing, laying and jointing UPVC metre 365.55


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 140mm dia.

31.162.1F Providing, laying and jointing UPVC metre 475.02


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 160mm dia.

31.162.1G Providing, laying and jointing UPVC metre 664.85


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked

Puducherry Region
31. Water Supply (Public Health)
Page No.: 576
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including transportation to the site ,


lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 180mm dia.

31.162.1H Providing, laying and jointing UPVC metre 745.03


pipes(Finolex/Jain) (0.4 Mpa)conforming to
IS specification 4985 and ISI marked
including transportation to the site ,
lowering to the trenches, laying to proper
grade and alignment, testing of joints with
required testing equipment,including cost
of solvent cement,excluding UPVC specials
such as bends,tees, threaded
pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD
specification. - 200mm dia.

31.164.1A Providing and fixing in position UPVC no 34.61


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
20mm dia

31.164.1B Providing and fixing in position UPVC no 35.50


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
25mm dia

31.164.1C Providing and fixing in position UPVC no 61.49


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32mm dia

31.164.1D Providing and fixing in position UPVC no 71.75


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40mm dia

31.164.1E Providing and fixing in position UPVC no 88.62

Puducherry Region
31. Water Supply (Public Health)
Page No.: 577
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

moulded equal Tee (Finolex/Jain)(1 Mpa)


conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50mm dia

31.164.1F Providing and fixing in position UPVC no 118.76


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63mm dia

31.164.1G Providing and fixing in position UPVC no 193.51


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75mm dia

31.164.1H Providing and fixing in position UPVC no 256.20


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90mm dia

31.164.1I Providing and fixing in position UPVC no 340.60


moulded equal Tee (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110mm dia

31.164.1J Providing and fixing in position UPVC no 137.14


moulded equal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75mm dia

31.164.1K Providing and fixing in position UPVC no 163.67


moulded equal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90mm dia

31.164.1L Providing and fixing in position UPVC no 245.35


moulded equal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for

Puducherry Region
31. Water Supply (Public Health)
Page No.: 578
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

jointing, jointing materials etc,complete -


110mm dia

31.164.1M Providing and fixing in position UPVC no 361.10


moulded equal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140mm dia

31.164.1N Providing and fixing in position UPVC no 480.45


moulded equal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160mm dia

31.165.1A Providing and fixing in position UPVC no 121.47


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 x 50mm dia

31.165.1B Providing and fixing in position UPVC no 165.96


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 x 50mm dia

31.165.1C Providing and fixing in position UPVC no 211.71


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 x 50mm dia

31.165.1D Providing and fixing in position UPVC no 220.04


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 x 63mm dia

31.165.1E Providing and fixing in position UPVC no 249.81


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 x 75mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 579
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.165.1F Providing and fixing in position UPVC no 303.22


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 x 50mm dia

31.165.1G Providing and fixing in position UPVC no 293.58


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 x 63mm dia

31.165.1H Providing and fixing in position UPVC no 256.20


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 x 90mm dia

31.165.1I Providing and fixing in position UPVC no 437.64


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 x 50mm dia

31.165.1J Providing and fixing in position UPVC no 561.83


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 x 63mm dia

31.165.1K Providing and fixing in position UPVC no 453.32


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 x 90mm dia

31.165.1L Providing and fixing in position UPVC no 473.82


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 x 110mm dia

31.165.1M Providing and fixing in position UPVC no 622.10


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 580
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
160 x 50mm dia

31.165.1N Providing and fixing in position UPVC no 712.54


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 x 63mm dia

31.165.1O Providing and fixing in position UPVC no 543.75


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 x 90mm dia

31.165.1P Providing and fixing in position UPVC no 573.88


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 x 110mm dia

31.165.1Q Providing and fixing in position UPVC no 992.71


moulded unequal Tee (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 x 140mm dia

31.166.1A Providing and fixing in position UPVC no 24.73


moulded plain coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
20mm dia

31.166.1B Providing and fixing in position UPVC no 28.94


moulded plain coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
25mm dia

31.166.1C Providing and fixing in position UPVC no 45.22


moulded plain coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 581
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.166.1D Providing and fixing in position UPVC no 56.66


moulded plain coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40mm dia

31.166.1E Providing and fixing in position UPVC no 73.84


moulded plain coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50mm dia

31.166.1F Providing and fixing in position UPVC no 113.94


moulded plain coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63mm dia

31.166.1G Providing and fixing in position UPVC no 162.17


moulded plain coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75mm dia

31.166.1H Providing and fixing in position UPVC no 224.86


moulded plain coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90mm dia

31.166.1I Providing and fixing in position UPVC no 258.62


moulded plain coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110mm dia

31.166.1J Providing and fixing in position UPVC no 320.10


moulded plain coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140mm dia

31.166.1K Providing and fixing in position UPVC no 353.86


moulded plain coupler (Finolex/Jain)(0.4
Mpa) conforming to IS 7834 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 582
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
160mm dia

31.167.1A Providing and fixing in position UPVC no 19.90


moulded reducer coupler (Finolex/Jain)(1
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
25 x 20mm dia

31.167.1B Providing and fixing in position UPVC no 37.38


moulded reducer coupler (Finolex/Jain)(1
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32 x 25mm dia

31.167.1C Providing and fixing in position UPVC no 41.60


moulded reducer coupler (Finolex/Jain)(1
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40 x 32mm dia

31.167.1D Providing and fixing in position UPVC no 55.76


moulded reducer coupler (Finolex/Jain)(1
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50 x 40mm dia

31.167.1E Providing and fixing in position UPVC no 61.78


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 x 40mm dia

31.167.1F Providing and fixing in position UPVC no 70.53


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 x 50mm dia

31.167.1G Providing and fixing in position UPVC no 128.10


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 x 63mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 583
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.167.1H Providing and fixing in position UPVC no 138.36


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 x 63mm dia

31.167.1I Providing and fixing in position UPVC no 143.77


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 x 75mm dia

31.167.1J Providing and fixing in position UPVC no 183.86


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 x 75mm dia

31.167.1K Providing and fixing in position UPVC no 154.93


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 x 90mm dia

31.167.1L Providing and fixing in position UPVC no 341.80


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 x 110mm dia

31.167.1M Providing and fixing in position UPVC no 349.04


moulded reducer coupler (Finolex/Jain)(0.6
Mpa) conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 x 140mm dia

31.168.1A Providing and fixing in position UPVC no 20.50


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
20mm dia

31.168.1B Providing and fixing in position UPVC no 21.94


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 584
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
25mm dia

31.168.1C Providing and fixing in position UPVC no 39.61


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32mm dia

31.168.1D Providing and fixing in position UPVC no 51.25


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40mm dia

31.168.1E Providing and fixing in position UPVC no 66.92


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50mm dia

31.168.1F Providing and fixing in position UPVC no 88.62


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63mm dia

31.168.1G Providing and fixing in position UPVC no 132.02


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75mm dia

31.168.1H Providing and fixing in position UPVC no 194.72


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90mm dia

31.168.1I Providing and fixing in position UPVC no 334.57


moulded elbow (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 585
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.168.1J Providing and fixing in position UPVC no 53.65


moulded elbow (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63mm dia

31.168.1K Providing and fixing in position UPVC no 93.44


moulded elbow (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75mm dia

31.168.1L Providing and fixing in position UPVC no 117.55


moulded elbow (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90mm dia

31.168.1M Providing and fixing in position UPVC no 157.34


moulded elbow (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110mm dia

31.168.1N Providing and fixing in position UPVC no 281.53


moulded elbow (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140mm dia

31.168.1O Providing and fixing in position UPVC no 371.95


moulded elbow (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160mm dia

31.169.1A Providing and fixing in position UPVC no 29.84


moulded male threaded adopter
(Finolex/Jain)(1 Mpa)conforming to IS 7834
part II and ISI marked,including labour
charges for jointing, jointing materials
etc,complete -20 x 15mm dia

31.169.1B Providing and fixing in position UPVC no 34.96


moulded male threaded adopter
(Finolex/Jain)(1 Mpa)conforming to IS 7834

Puducherry Region
31. Water Supply (Public Health)
Page No.: 586
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

part II and ISI marked,including labour


charges for jointing, jointing materials
etc,complete -25 x 20mm dia

31.169.1C Providing and fixing in position UPVC no 65.72


moulded male threaded adopter
(Finolex/Jain)(1 Mpa)conforming to IS 7834
part II and ISI marked,including labour
charges for jointing, jointing materials
etc,complete -32 x 25mm dia

31.169.1D Providing and fixing in position UPVC no 71.13


moulded male threaded adopter
(Finolex/Jain)(1 Mpa)conforming to IS 7834
part II and ISI marked,including labour
charges for jointing, jointing materials
etc,complete -40 x 32mm dia

31.169.1E Providing and fixing in position UPVC no 75.95


moulded male threaded adopter
(Finolex/Jain)(0.6 Mpa)conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -50 x 40mm dia

31.169.1F Providing and fixing in position UPVC no 83.80


moulded male threaded adopter
(Finolex/Jain)(0.6 Mpa)conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -63 x 50mm dia

31.169.1G Providing and fixing in position UPVC no 144.08


moulded male threaded adopter
(Finolex/Jain)(0.6 Mpa)conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -75 x 63mm dia

31.169.1H Providing and fixing in position UPVC no 168.20


moulded male threaded adopter
(Finolex/Jain)(0.6 Mpa)conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -90 x 75mm dia

31.169.1I Providing and fixing in position UPVC no 194.72


moulded male threaded adopter
(Finolex/Jain)(0.6 Mpa)conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -110 x 90mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 587
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.170.1A Providing and fixing in position UPVC no 38.22


moulded female threaded adopter
(Finolex/Jain)(1 Mpa) conforming to IS 7834
part II and ISI marked,including labour
charges for jointing, jointing materials
etc,complete -20 x 15mm dia

31.170.1B Providing and fixing in position UPVC no 40.69


moulded female threaded adopter
(Finolex/Jain)(1 Mpa) conforming to IS 7834
part II and ISI marked,including labour
charges for jointing, jointing materials
etc,complete -25x 20mm dia

31.170.1C Providing and fixing in position UPVC no 69.33


moulded female threaded adopter
(Finolex/Jain)(1 Mpa) conforming to IS 7834
part II and ISI marked,including labour
charges for jointing, jointing materials
etc,complete -32 x 25mm dia

31.170.1D Providing and fixing in position UPVC no 154.93


moulded female threaded adopter
(Finolex/Jain)(0.6 Mpa) conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -75 x 63mm dia

31.170.1E Providing and fixing in position UPVC no 175.42


moulded female threaded adopter
(Finolex/Jain)(0.6 Mpa) conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -90 x 63mm dia

31.170.1F Providing and fixing in position UPVC no 182.66


moulded female threaded adopter
(Finolex/Jain)(0.6 Mpa) conforming to IS
7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete -90 x 75mm dia

31.171.1A Providing and fixing in position UPVC no 17.60


moulded endcap (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
20mm dia

31.171.1B Providing and fixing in position UPVC no 18.87


moulded endcap (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 588
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
25mm dia

31.171.1C Providing and fixing in position UPVC no 34.54


moulded endcap (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
32mm dia

31.171.1D Providing and fixing in position UPVC no 43.35


moulded endcap (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
40mm dia

31.171.1E Providing and fixing in position UPVC no 48.35


moulded endcap (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
50mm dia

31.171.1F Providing and fixing in position UPVC no 52.14


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63mm dia

31.171.1G Providing and fixing in position UPVC no 87.60


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75mm dia

31.171.1H Providing and fixing in position UPVC no 110.32


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90mm dia

31.171.1I Providing and fixing in position UPVC no 116.35


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 589
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.171.1J Providing and fixing in position UPVC no 197.13


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140mm dia

31.171.1K Providing and fixing in position UPVC no 236.49


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160mm dia

31.171.1L Providing and fixing in position UPVC no 350.84


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
180mm dia

31.171.1M Providing and fixing in position UPVC no 399.07


moulded endcap (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
200mm dia

31.172.1A Providing and fixing in position UPVC no 58.48


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to
IS 7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete - 63mm dia

31.172.1B Providing and fixing in position UPVC no 91.03


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to
IS 7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete - 75mm dia

31.172.1C Providing and fixing in position UPVC no 95.86


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to
IS 7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete - 90mm dia

31.172.1D Providing and fixing in position UPVC no 109.11


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to

Puducherry Region
31. Water Supply (Public Health)
Page No.: 590
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

IS 7834 part II and ISI marked,including


labour charges for jointing, jointing
materials etc,complete - 110mm dia

31.172.1E Providing and fixing in position UPVC no 214.00


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to
IS 7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete - 140mm dia

31.172.1F Providing and fixing in position UPVC no 262.23


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to
IS 7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete - 160mm dia

31.172.1G Providing and fixing in position UPVC no 418.36


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to
IS 7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete - 180mm dia

31.172.1H Providing and fixing in position UPVC no 518.43


moulded tail piece without
flange(Finolex/Jain) (0.6 Mpa)conforming to
IS 7834 part II and ISI marked,including
labour charges for jointing, jointing
materials etc,complete - 200mm dia

31.173.1A Providing and fixing in position UPVC no 95.86


moulded saddle set (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 x 20mm dia

31.173.1B Providing and fixing in position UPVC no 124.79


moulded saddle set (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 x 20mm dia

31.173.1C Providing and fixing in position UPVC no 132.02


moulded saddle set (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 x 20mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 591
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.173.1D Providing and fixing in position UPVC no 150.11


moulded saddle set (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 x 20mm dia

31.173.1E Providing and fixing in position UPVC no 287.55


moulded saddle set (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 x 20mm dia

31.173.1F Providing and fixing in position UPVC no 336.99


moulded saddle set (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 x 20mm dia

31.174.1A Providing and fixing in position UPVC no 61.78


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 mm dia

31.174.1B Providing and fixing in position UPVC no 103.08


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 mm dia

31.174.1C Providing and fixing in position UPVC no 133.23


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 mm dia

31.174.1D Providing and fixing in position UPVC no 168.20


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 mm dia

31.174.1E Providing and fixing in position UPVC no 294.78


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 592
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
140 mm dia

31.174.1F Providing and fixing in position UPVC no 333.36


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 mm dia

31.174.1G Providing and fixing in position UPVC no 477.43


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
180 mm dia

31.174.1H Providing and fixing in position UPVC no 530.48


fabricated coupler (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
200 mm dia

31.175.1A Providing and fixing in position UPVC no 75.36


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 mm dia

31.175.1B Providing and fixing in position UPVC no 117.55


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 mm dia

31.175.1C Providing and fixing in position UPVC no 145.29


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 mm dia

31.175.1D Providing and fixing in position UPVC no 189.89


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 593
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.175.1E Providing and fixing in position UPVC no 333.36


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 mm dia

31.175.1F Providing and fixing in position UPVC no 393.65


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 mm dia

31.175.1G Providing and fixing in position UPVC no 530.48


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
180 mm dia

31.175.1H Providing and fixing in position UPVC no 576.30


fabricated coupler (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
200 mm dia

31.176.1A Providing and fixing in position UPVC no 115.15


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 mm dia

31.176.1B Providing and fixing in position UPVC no 165.78


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 mm dia

31.176.1C Providing and fixing in position UPVC no 229.68


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 mm dia

31.176.1D Providing and fixing in position UPVC no 275.50


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 594
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
110 mm dia

31.176.1E Providing and fixing in position UPVC no 384.00


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 mm dia

31.176.1F Providing and fixing in position UPVC no 440.66


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 mm dia

31.176.1G Providing and fixing in position UPVC no 561.83


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
180 mm dia

31.176.1H Providing and fixing in position UPVC no 622.10


fabricated coupler (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
200 mm dia

31.177.1A Providing and fixing in position UPVC no 76.56


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 mm dia

31.177.1B Providing and fixing in position UPVC no 123.58


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 mm dia

31.177.1C Providing and fixing in position UPVC no 169.40


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 595
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.177.1D Providing and fixing in position UPVC no 199.53


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 mm dia

31.177.1E Providing and fixing in position UPVC no 387.62


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 mm dia

31.177.1F Providing and fixing in position UPVC no 592.57


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 mm dia

31.177.1G Providing and fixing in position UPVC no 743.88


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
180 mm dia

31.177.1H Providing and fixing in position UPVC no 823.45


fabricated bend (Finolex/Jain)(0.4 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
200 mm dia

31.178.1A Providing and fixing in position UPVC no 91.03


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 mm dia

31.178.1B Providing and fixing in position UPVC no 145.29


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 mm dia

31.178.1C Providing and fixing in position UPVC no 199.53


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI

Puducherry Region
31. Water Supply (Public Health)
Page No.: 596
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

marked,including labour charges for


jointing, jointing materials etc,complete -
90 mm dia

31.178.1D Providing and fixing in position UPVC no 252.59


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 mm dia

31.178.1E Providing and fixing in position UPVC no 516.62


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 mm dia

31.178.1F Providing and fixing in position UPVC no 737.25


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 mm dia

31.178.1G Providing and fixing in position UPVC no 942.81


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
180 mm dia

31.178.1H Providing and fixing in position UPVC no 1,126.06


fabricated bend (Finolex/Jain)(0.6 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
200 mm dia

31.179.1A Providing and fixing in position UPVC no 136.85


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
63 mm dia

31.179.1B Providing and fixing in position UPVC no 205.57


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
75 mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 597
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.179.1C Providing and fixing in position UPVC no 268.26


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
90 mm dia

31.179.1D Providing and fixing in position UPVC no 327.33


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
110 mm dia

31.179.1E Providing and fixing in position UPVC no 625.13


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
140 mm dia

31.179.1F Providing and fixing in position UPVC no 812.01


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
160 mm dia

31.179.1G Providing and fixing in position UPVC no 1,012.74


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
180 mm dia

31.179.1H Providing and fixing in position UPVC no 1,188.76


fabricated bend (Finolex/Jain)(1 Mpa)
conforming to IS 7834 part II and ISI
marked,including labour charges for
jointing, jointing materials etc,complete -
200 mm dia

31.250.1A Supplying of electrically operated wet type no 51,713.39


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3" dia. to
suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 598
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

The pumpset shall be guaranteed for a


period of one year from the date of
commissioning.(5 HP Submersible motor and
pumpset).

31.250.1B Supplying of electrically operated wet type no 36,160.67


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
with suitable suction and delivery sizes,
complete. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(5 HP Submersible motor and
pumpset open well)

31.250.1C Supplying of electrically operated wet type no 54,561.10


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3" dia. to
suit the borewell (150 / 200mm dia.),
complete. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(7.5 HP Submersible motor and
pumpset).

31.250.1D Supplying of electrically operated wet type no 42,149.07


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
with suitable suction and delivery sizes,
complete. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(7.5 HP Submersible motor and
pumpset open well).

31.250.1E Supplying of electrically operated wet type no 65,461.26


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 599
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

The pump shall have brass impeller, high


grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3" dia. to
suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(10 HP Submersible motor and
pumpset).

31.250.1F Supplying of electrically operated wet type no 62,156.61


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
with suitable suction and delivery sizes,
complete. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(10 HP Submersible motor and
pumpset open Well).

31.250.1G Supplying of electrically operated wet type no 75,740.52


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3" dia. to
suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(12.5 HP Submersible motor
and pumpset).

31.250.1H Supplying of electrically operated wet type no 86,057.17


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3" dia. to
suit the borewell (150 / 200mm dia.),
complete. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of

Puducherry Region
31. Water Supply (Public Health)
Page No.: 600
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

commissioning.(15 HP Submersible motor and


pumpset).

31.250.1I Supplying of electrically operated wet type no 94,172.31


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3"/4" dia. to
suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(17.5 HP Submersible motor
and pumpset).

31.250.1J Supplying of electrically operated wet type no 1,08,995.62


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3"/4" dia. to
suit the borewell (150 / 200mm dia.),
complete. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(20 HP Submersible motor and
pumpset).

31.250.1K Supplying of electrically operated wet type no 1,12,692.10


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3"/4" dia. to
suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(25 HP Submersible motor and
pumpset).

31.250.1L Supplying of electrically operated wet type no 1,16,008.80


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 601
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

The pump shall have brass impeller, high


grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3"/4" dia. to
suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(30 HP Submersible motor and
pumpset).

31.250.1M Supplying of electrically operated wet type no 1,21,933.30


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3"/4" dia. to
suit the borewell (150 / 200mm dia.),
complete. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(35 HP Submersible motor and
pumpset).

31.250.1N Supplying of electrically operated wet type no 1,26,338.71


submersible motor and pumpset
(Texmo/KSB/Taro/Kirloskar make), AC 3
phase, 415 volts, 50 Hz, 2900-3000 RPM.
The pump shall have brass impeller, high
grade steel shaft with sufficient stages
having outlet size of 2"/2.5"/3"/4" dia. to
suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning.(40 HP Submersible motor and
pumpset).

31.251.1A Supplying of electrically operated, single no 39,831.84


stage high speed, centrifugal monoblock
with volute type delivery pumpset
(Texmo/KSB/Taro/Kirloskar) make, AC 3
phase, 415V, 50 HZ, 2900 - 3000 RPM. The
pump shell have C.I. impeller, high grade
steel shaft having (100mm x 100mm) suction
and delivery respectively including stainer
/ foot valve to pump the water from UGR to
OHT. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 602
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

The pumpset shall be guaranteed for a


period of one year from the date of
commissioning.(5 HP Monoblock centrifugal
motor and pumpset).

31.251.1B Supplying of electrically operated, single no 42,528.84


stage high speed, centrifugal monoblock
with volute type delivery pumpset
(Texmo/KSB/Taro/Kirloskar) make, AC 3
phase, 415V, 50 HZ, 2900 - 3000 RPM. The
pump shell have C.I. impeller, high grade
steel shaft having (100mm x 100mm) suction
and delivery respectively including stainer
/ foot valveto pump the water from UGR to
OHT. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning(7.5 HP Monoblock centrifugal
motor and pumpset).

31.251.1C Supplying of electrically operated, single no 57,700.58


stage high speed, centrifugal monoblock
with volute type delivery pumpset
(Texmo/KSB/Taro/Kirloskar) make, AC 3
phase, 415V, 50 HZ, 2900 - 3000 RPM. The
pump shell have C.I. impeller, high grade
steel shaft having (100mm x 100mm) suction
and delivery respectively including stainer
/ foot valveto pump the water from UGR to
OHT. The rate includes, all taxes,
freight, etc., FOR at site in Puducherry.
The pumpset shall be guaranteed for a
period of one year from the date of
commissioning(10 HP Monoblock centrifugal
motor and pumpset).

31.252.1A Supplying and fixing of 63 Amps capacity no 34,944.19


wall mounting panel board of size
1200mmx750mmx225 mm made of 16 gauge CR
M.S. sheet painted with two coats of enamel
paint, over zinc chromate primer, suitable
for fixing switch disconnector, fuse
switches etc. The panel board shall
include power mat, copper busbar, 3mm thick
hylan sheet, square voltmeter (96
mm-IMP/AE/L&T/Siemens), voltmeter selector
switch, square ammeter (96
mm-IMP/AE/L&T/Siemens), 3 Nos of C.T. coil,
3 Nos. of indicator, 3 Nos. of toggle
switches and 3 Nos. of side lock fuses,
with 2 A fuse link complete.The board shall

Puducherry Region
31. Water Supply (Public Health)
Page No.: 603
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

be mounted on an angle frame of 30mm x 30mm


x 6mm with legs. The rate is inclusive of
internal wiring and with copper earth flat
linked with shutters and doors. Supplying
and fixing of 2 Nos. of TPN
(CG/L&T/Siemens/Standard make) 63 Amps, 415
V disconnector switch/cubical switch/fuse
switch with fuse links complete . (1 No.
for E.D. supply and 1 No. for Diesel
Generator supply).Supplying and fixing of 2
Nos of 63 Amps, 415 V disconnector fuse
switch/TPN Cubical switch
(CG/L&T/Siemens/standard make) with fuse
links capacitor motor control (1 number of
power capacitor and 1 number of motor
control), complete.- upto 12.5HP

31.252.1B Supplying and fixing of 100/125 Amps no 52,831.01


capacity cubical wall mounting panel board
of size1300mm x 750mm x 225mm made of 16
gauge CR M.S. sheet painted with two coats
of enamel paint, over zinc chromate primer,
suitable arrangements for fixing switch
disconnector, fuse switches, Voltmeter,
Voltmeter Selector switch, Ammeter,
Ammeter Selector switch, 3 Nos. of
Indicator, 3 Nos. of Toggle switch, 3 Nos.
of side lock fuses, 3 Nos. of C.T. Coil
etc. The panel board shall include power
mat, copper busbar, 3mm thick hylan sheet
including internal wiring with provision
for interlocking arrangements, copper flat
for earthing arrangement linked with
shutters and doors. The board shall be
mounted on an angle frame of 30mm x 30mm x
6mm with legs.Supplying and fixing of 2
Nos. of TPN (CG/L&T/Siemens/Standard make)
100/125 Amps, 415 V disconnector
switch/cubical switch/fuse switch with fuse
links complete.(1 No. for E.D. supply and 1
No. for Diesel Generator supply).Supplying
and fixing of 2 Nos of 100 Amps, 415 V
disconnector fuse switch/TPN Cubical switch
(CG/L&T/Siemens/standard make) with fuse
links capacitor motor control complete. (1
number of power capacitor and 1 number of
motor control), complete - 15HP to 30HP.

31.252.1C Supplying and fixing of 200 Amps capacity no 61,193.31


cubical wall mounting panel board of
size1400mm x 900mm x 250mm made of 16 gauge
CR M.S. sheet painted with two coats of

Puducherry Region
31. Water Supply (Public Health)
Page No.: 604
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

enamel paint, over zinc chromate primer,


suitable arrangements for fixing switch
disconnector, fuse switches, Voltmeter,
Voltmeter Selector switch, Ammeter,
Ammeter Selector switch, 3 Nos. of
Indicator, 3 Nos. of Toggle switch, 3 Nos.
of side lock fuses, 3 Nos. of C.T. Coil
etc. The panel board shall include power
mat, copper busbar, 3mm thick hylan sheet
including internal wiring with provision
for interlocking arrangements, copper flat
for earthing arrangement linked with
shutters and doors. The board shall be
mounted on an angle frame of 30mm x 30mm x
6mm with legs.Supplying and fixing of 2
Nos. of TPN (CG/L&T/Siemens/Standard make)
200 Amps, 415 V disconnector switch/cubical
switch/fuse switch with fuse links
complete. (1 No. for E.D. supply and 1 No.
for Diesel Generator supply).Supplying and
fixing of 2 Nos of 125 Amps, 415 V
disconnector fuse switch/TPN Cubical switch
(CG/L&T/Siemens/standard make) with fuse
links capacitor motor control (1 number of
power capacitor and 1 number of motor
control), complete. -above 30HP

31.253.1A Supplying and fixing one set wall mounting no 16,377.38


/ standing type panel board of size 900mm x
300mm x 150mm of M.S. angle (30mm x 30mm x
6mm). The panel should have suitable
arrangements for fixing Voltmeter,
Voltmeter selector switch, Ammeter, Ammeter
selector switch, 3 Nos of Indicator, 3 Nos
of flush type switch, 3 Nos of flush type
fuses, 3 Nos of incandescent bulbs, 3 Nos
of C.T. Coil etc. including wiring with 4
sqmm and 1.50 sqmm copper wire - 63 Amps
TPN main switch.-upto 12.5HP

31.253.1B Supplying and fixing one set wall mounting no 18,824.82


/ standing type panel board of size 900mm x
300mm x 150mm of M.S. angle (30mm x 30mm x
6mm). The panel should have suitable
arrangements for fixing Voltmeter,
Voltmeter selector switch, Ammeter, Ammeter
selector switch, 3 Nos of Indicator, 3 Nos
of flush type switch, 3 Nos of flush type
fuses, 3 Nos of incandescent bulbs, 3 Nos
of C.T. Coil etc. including wiring with 4
sqmm and 1.50 sqmm copper wire - 100 Amps
TPN main switch.-15HP to 20HP

Puducherry Region
31. Water Supply (Public Health)
Page No.: 605
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.253.1C Supplying and fixing one set wall mounting no 22,303.08


/ standing type panel board of size 900mm x
300mm x 150mm of M.S. angle (30mm x 30mm x
6mm). The panel should have suitable
arrangements for fixing Voltmeter,
Voltmeter selector switch, Ammeter, Ammeter
selector switch, 3 Nos of Indicator, 3 Nos
of flush type switch, 3 Nos of flush type
fuses, 3 Nos of incandescent bulbs, 3 Nos
of C.T. Coil etc. including wiring with 4
sqmm and 1.50 sqmm copper wire - 200 Amps
TPN main switch.-25HP to 40HP

31.254.1 Supplying and fixing C.T. metering panel no 27,052.09


board as per Electricity Department
Specification (Drawing enclosed). Panel
board of size 1800mm x 900mm x 300mm made
of 18 gauge CRMS sheet painted with two
coats of enamel paint over Zinc chromate
primer with necessary MS base channel. The
panel board shall include power mat, copper
busbar, 8mm thick Hylan sheet of size 84 x
54cm.

31.254.2A Supply and fixing of 200mm dia strainer Each 8,620.31

31.254.2B Supply and fixing of 300mm dia strainer Each 9,548.65

31.254.2C Supply and fixing of 400mm dia strainer Each 10,609.61

31.254.3A Providing and fixing of pressure gauge 0-5 Each 3,315.51


KG/CM2 with necessary valve arrangements

31.255.1A Supplying and fixing of 4KVAR power no 1,689.10


capacitor (CG/L&T/Siemens make) for 10 HP
motor complete.

31.255.1B Supplying and fixing of 6KVAR power no 2,273.83


capacitor (CG/L&T/Siemens make) for 12.5
HP motor complete.

31.255.1C Supplying and fixing of 7.5KVAR power no 2,777.79


capacitor (CG/L&T/Siemens make) for 15 HP
motor complete.

31.255.1D Supplying and fixing of 10KVAR power no 3,619.32


capacitor (CG/L&T/Siemens make) for
17.5/20 HP motor complete.

31.255.1E Supplying and fixing of 12.5KVAR power no 4,431.92


capacitor (CG/L&T/Siemens make) for 25 HP
motor complete.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 606
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.255.1F Supplying and fixing of 15KVAR power no 5,298.77


capacitor (CG/L&T/Siemens make) for 30 HP
motor complete.

31.255.1G Supplying and fixing of 20KVAR power no 6,989.08


capacitor (CG/L&T/Siemens make) for 35/40
HP motor complete.

31.255.1H Supplying and fixing of 25KVAR power no 8,664.91


capacitor (CG/L&T/Siemens make) for 50 HP
motor complete.

31.256.1A Supplying and fixing of fully automatic no 6,790.15


air break star-delta starter range for
5A to 13A F.A.S.D. (Bharat Culter
Hammer/L&T/Siemens make) with suitable M.S.
angle frame etc., complete.- 5HP to 12.5
HP pumpsets

31.256.1B Supplying and fixing of fully automatic no 7,904.15


air break star-delta starter range for
10A to 23A F.A.S.D. (Bharat Culter
Hammer/L&T/Siemens make) with suitable M.S.
angle frame etc., complete.- 15HP to 17.5
HP pumpsets

31.256.1C Supplying and fixing of fully automatic no 11,381.21


air break star-delta starter range for
13A to 25A F.A.S.D. (Bharat Culter
Hammer/L&T/Siemens make) with suitable M.S.
angle frame etc., complete.- 20HP to 25HP
pumpsets -(ML-1.5)

31.256.1D Supplying and fixing of fully automatic no 14,395.31


air break star-delta starter range for
20A to 33A F.A.S.D. (Bharat Culter
Hammer/L&T/Siemens make) with suitable M.S.
angle frame etc., complete.-30 HP pumpsets

31.256.1E Supplying and fixing of fully automatic no 17,409.40


air break star-delta starter range for
23A to 33A F.A.S.D. (Bharat Culter
Hammer/L&T/Siemens make) with suitable M.S.
angle frame etc.,complete.- 35 HP
pumpsets-(ML2)

31.256.1F Supplying and fixing of fully automatic no 25,848.86


air break star-delta starter range for
28A to 42A F.A.S.D. (Bharat Culter
Hammer/L&T/Siemens make) with suitable M.S.
angle frame etc.,complete.- 40 HP to 50 HP

Puducherry Region
31. Water Supply (Public Health)
Page No.: 607
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pumpsets

31.256.2A Supplying and fixing Fully Automatic Auto Each 94,664.81


Transformer Starter (Pedestal
Type)(Jyothi/Kilburn/Unilec) with oil
immersed contactors and auto transformer
having 50%,65% and 80% tapping with built
in start stop push botton and thermal timer
adjustable between 3-12 seconds(Relay range
in Amps 48-80) - 40 HP pumpsets

31.256.2B Supplying and fixing Fully Automatic Auto Each 1,31,774.32


Transformer Starter (Pedestal
Type)(Jyothi/Kilburn/Unilec) with oil
immersed contactors and auto transformer
having 50%,65% and 80% tapping with built
in start stop push botton and thermal timer
adjustable between 3-12 seconds(Relay range
in Amps 48-80) - 50 HP pumpsets

31.256.2C Supplying and fixing Fully Automatic Auto Each 1,44,908.53


Transformer Starter (Pedestal
Type)(Jyothi/Kilburn/Unilec) with oil
immersed contactors and auto transformer
having 50%,65% and 80% tapping with built
in start stop push botton and thermal timer
adjustable between 3-12 seconds(Relay range
in Amps 60-100) - 60 HP pumpsets

31.256.2D Supplying and fixing Fully Automatic Auto Each 1,86,487.93


Transformer Starter (Pedestal
Type)(Jyothi/Kilburn/Unilec) with oil
immersed contactors and auto transformer
having 50%,65% and 80% tapping with built
in start stop push botton and thermal timer
adjustable between 3-12 seconds(Relay range
in Amps 90-150) - 75 HP pumpsets

31.256.2E Supplying and fixing Fully Automatic Auto Each 2,27,600.15


Transformer Starter (Pedestal
Type)(Jyothi/Kilburn/Unilec) with oil
immersed contactors and auto transformer
having 50%,65% and 80% tapping with built
in start stop push botton and thermal timer
adjustable between 3-12 seconds(Relay range
in Amps 90-150) - 100 HP pumpsets

31.256.2F Supplying and fixing Fully Automatic Auto Each 2,44,310.28


Transformer Starter (Pedestal
Type)(Jyothi/Kilburn/Unilec) with oil
immersed contactors and auto transformer
having 50%,65% and 80% tapping with built

Puducherry Region
31. Water Supply (Public Health)
Page No.: 608
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

in start stop push botton and thermal timer


adjustable between 3-12 seconds(Relay range
in Amps 120-200) also included panel
mounted with Ammeter and ON-OFF Trip
indicating lamps. - 125 HP pumpsets

31.256.2G Supplying and fixing Fully Automatic Auto Each 2,62,704.69


Transformer Starter (Pedestal
Type)(Jyothi/Kilburn/Unilec) with oil
immersed contactors and auto transformer
having 50%,65% and 80% tapping with built
in start stop push botton and thermal timer
adjustable between 3-12 seconds(Relay range
in Amps120-200) also included panel mounted
with Ammeter and ON-OFF Trip indicating
lamps. - 150 HP pumpsets

31.257.1 Supplying and fixing of DOL starters 0.5 no 2,320.85


HP to 5 HP with relay range 0.63 A to 13 A
with suitable M.S. angle frame complete.

31.258.1A Supplying and fixing of 1x3x4 sqmm (single metre 129.00


run) PVC insulated copper submersible flat
flexible cable of Finolex make
complete.-upto 10HP pumpset.

31.258.1B Supplying and fixing of 1x3x6 sqmm (single metre 177.23


run) PVC insulated copper submersible flat
flexible cable of Finolex make
complete.-12.5HP to 20HP pumpset

31.258.1C Supplying and fixing of 1x3x10 sqmm metre 285.74


(single run) PVC insulated copper
submersible flat flexible cable of Finolex
make complete.-above 20HP pumpset

31.259.1A Supplying of 3.5/ 4x25 sqmm underground metre 258.01


cable (Paragon/suncab/Empire)
complete.-upto 25HP pumpset.

31.259.1B Supplying of 3.5/4x50 sqmm underground metre 407.51


cable (Paragon/suncab/Empire)
complete.-suitable for (30HP to 40HP
pumpset)/(upto 40KVA Genset).

31.259.1C Supplying of 3.5x70 sqmm underground cable metre 389.42


(Paragon/suncab/Empire) complete.- 50HP
pumpset.

31.259.1D Supplying of 3.5x95 sqmm underground cable metre 617.29


(Paragon/suncab/Empire) complete.- suitable
for (60HP to 75HP pumpset)/(above 40KVA to

Puducherry Region
31. Water Supply (Public Health)
Page No.: 609
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

75KVA Genset).

31.259.1E Supplying of 3.5x120 sqmm underground metre 654.66


cable (Paragon/suncab/Empire) complete.

31.259.1F Supplying of 3.5x150 sqmm underground metre 890.97


cable (Paragon/suncab/Empire)
complete.(above 82.5KVA to 125KVA Genset).

31.259.1G Supplying of 3.5x185 sqmm underground metre 980.18


cable (Paragon/suncab/Empire) complete.

31.259.1H Supplying of 3.5x240 sqmm underground metre 1,387.69


cable (Paragon/suncab/Empire)
complete.-(above 160KVA to 200KVA Genset).

31.259.1I Supplying of 3.5x300 sqmm underground metre 1,695.13


cable (Paragon/suncab/Empire)
complete.(above 250KVA Genset).

31.260.1A Laying of UG cable and providing joint 179.88


termination of cable joint with suitable
cable gland,cable socket etc., complete -
3.5/4 x 25 sqmm cable.

31.260.1B Laying of UG cable and providing joint 245.22


termination of cable joint with suitable
cable gland,cable socket etc., complete -
3.5/4 x 50 / 3.5/4 x 70 sqmm cable.

31.260.1C Laying of UG cable and providing joint 280.55


termination of cable joint with suitable
cable gland,cable socket etc., complete -
3.5 x 95 sqmm cable.

31.260.1D Laying of UG cable and providing joint 312.20


termination of cable joint with suitable
cable gland,cable socket etc., complete -
3.5 x 120 sqmm cable.

31.260.1E Laying of UG cable and providing joint 375.43


termination of cable joint with suitable
cable gland,cable socket etc. complete -
3.5 x 150 sqmm cable.

31.260.1F Laying of UG cable and providing joint 518.19


termination of cable joint with suitable
cable gland,cable socket etc. complete -
3.5 x 185 sqmm cable.

31.260.1G Laying of UG cable and providing joint 579.91


termination of cable joint with suitable

Puducherry Region
31. Water Supply (Public Health)
Page No.: 610
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cable gland,cable socket etc. complete -


3.5 x 240 sqmm cable.

31.260.1H Laying of UG cable and providing joint 788.49


termination of cable joint with suitable
cable gland,cable socket etc. complete -
3.5 x 300 sqmm cable.

31.261.1 Supplying and fixing of meter board of no 2,738.01


size 600mmx900mmx150mm on suitable angle
frame with suitable water proof plywood
12mm thick for receiving ED supply. The
board frame shall be painted and covered on
all sides by 16 gauge M.S. sheet and fixed
with 3 Nos. of 100 Amps fuse carrier
(Havells/Standard/Anchor make) with screws
etc., complete.

31.262.1 Supplying and fixing of teak wood aerial no 3,215.43


board with 100 Amps HRC fuse base and fuse
link and suitable post clamp to hold the
G.I. Pipe with electric post including
bolts and nuts etc., complete.

31.263.1 Making earth pit of G.I. pipe for earthing no 4,474.12


in earth pit with 40mm dia. G.I. pipe
medium class of length 3.05m perforated
with 46 Nos of 12mm dia. holes, pipe
lowered in bore holes of 150mm dia. and
filled in with charcoal and salt in
alternative layer of 300mm, the top of G.I.
pipe shall be clamped. Earth pit shall be
provided with 60cm dia precast ring with
60cm depth alround,covered with R.C.C.
precast slab etc. as per I.E. standards.

31.264.1A Supplying and fixing of copper wire 8 SWG metre 81.87


(4 mm dia) for earthing arrangements
including bolt and nuts etc., complete.

31.264.1B Supplying and fixing of G.I. wire 8 SWG (4 metre 11.12


mm dia) for earthing arrangements including
bolt and nuts etc.,

31.265.1 Providing and fixing 50 mm dia GI pipe metre 637.99


(Class B) conforming to IS 1239 (Part
1:1990) with GI fittings including
trenching, refilling etc., complete for UG
cable duct.

31.266.1 Supplying and fixing of pole clamp to hold set 312.87


the G.I. Pipe with electric post.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 611
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.267.1A Supplying and fixing of copper flat (25 x metre 872.58


3mm) for earthing arrangements including
bolts and nuts etc.

31.267.1B Supplying and fixing of G.I. flat (25 x metre 128.70


6mm) for earthing arrangements including
bolts and nuts etc.

31.268.1A Supplying,fixing and lowering into the metre 342.41


borewell high tensile threaded PVC column
pipes which are to be connected to the
submersible pump,including labour
charges,jointing materials
etc.,complete.-50 mm dia

31.268.1B Supplying,fixing and lowering into the metre 415.95


borewell high tensile threaded PVC column
pipes which are to be connected to the
submersible pump,including labour
charges,jointing materials
etc.,complete.-65 mm dia

31.268.1C Supplying,fixing and lowering into the metre 631.76


borewell high tensile threaded PVC column
pipes which are to be connected to the
submersible pump,including labour
charges,jointing materials
etc.,complete.-75/80 mm dia

31.268.1D Supplying,fixing and lowering into the metre 890.97


borewell high tensile threaded PVC column
pipes which are to be connected to the
submersible pump,including labour
charges,jointing materials
etc.,complete.-100 mm dia

31.269.1A Supplying and fixing of C.I. adopter which no 982.59


is to be connected to submersible pump
delivery pipe.-50 mm dia

31.269.1B Supplying and fixing of C.I. adopter which no 1,263.51


is to be connected to submersible pump
delivery pipe.-65 mm dia

31.269.1C Supplying and fixing of C.I. adopter which no 1,505.84


is to be connected to submersible pump
delivery pipe.-75/80 mm dia

31.269.1D Supplying and fixing of C.I. adopter which no 2,940.55


is to be connected to submersible pump
delivery pipe.-100 mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 612
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.270.1 Supplying and laying of 16mm dia nylon rope metre 131.71
for holding of motors.

31.271.1 Supplying and laying of 40mm dia. PVC pipe metre 211.29
(Class 3 - PN 0.6 Mpa) conforming to IS
4985 : 2000 for inserting submersible cable
from borewell to starter.

31.272.1 Supply and fixing of 80/100mm dia. M.S. no 846.97


erection clamps of size 80mmx12mm with
bolts, nuts, washer etc., complete.

31.273.1A Supplying,fixing and lowering into the metre 609.15


borewell the GI pipes of medium class
(TATA,TNT,Nezone,Apollo,Zenith) which are
to be connected to the submersible
pump,including labour charges,jointing
materials etc.,complete.-50 mm dia

31.273.1B Supplying,fixing and lowering into the metre 885.24


borewell the GI pipes of medium class
(TATA,TNT,Nezone,Apollo,Zenith) which are
to be connected to the submersible
pump,including labour charges,jointing
materials etc.,complete.-65 mm dia

31.273.1C Supplying,fixing and lowering into the metre 1,159.82


borewell the GI pipes of medium class
(TATA,TNT,Nezone,Apollo,Zenith) which are
to be connected to the submersible
pump,including labour charges,jointing
materials etc.,complete.-80 mm dia

31.273.1D Supplying,fixing and lowering into the metre 1,631.23


borewell the GI pipes of medium class
(TATA,TNT,Nezone,Apollo,Zenith) which are
to be connected to the submersible
pump,including labour charges,jointing
materials etc.,complete.-100 mm dia

31.274.1A Providing and fixing MS square threaded job 632.96


coupling (male and female thread) including
necessary welding with 50mm GI pipe. -50mm
dia.

31.274.1B Providing and fixing MS square threaded no 874.09


coupling (male and female thread) including
necessary welding with 65mmGI pipe. - 65mm
dia.

31.274.1C Providing and fixing MS square threaded no 1,085.07

Puducherry Region
31. Water Supply (Public Health)
Page No.: 613
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

coupling (male and female thread) including


necessary welding with 80mm GI pipe. -80mm
dia.

31.274.1D Providing and fixing MS square threaded no 1,326.20


coupling (male and female thread) including
necessary welding with 100mm GI pipe.
-100mm dia.

31.275.1A Laying of under ground cable direct in metre 98.00


ground including metal road
cutting,excavation of earth, sand cushion,
brick protection, back filling etc.,
complete. - upto 50 sqmm

31.275.1B Laying of under ground cable direct in metre 100.00


ground including metal road cutting,
excavation of earth, sand cushion, brick
protection, back filling etc., complete. -
above 50 sqmm

31.275.1C Laying of under ground cable direct in metre 62.00


ground including mud road
cutting,excavation of earth, sand cushion,
brick protection, back filling etc.,
complete. - upto 50 sqmm

31.275.1D Laying of under ground cable direct in metre 64.00


ground including metal road
cutting,excavation of earth, sand cushion,
brick protection, back filling etc.,
complete. - above 50 sqmm

31.276.1A Supplying of electricallly operated no 2,19,858.76


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(15 HP centrifugal motor
and pumpset).

31.276.1B Supplying of electricallly operated no 2,42,727.28


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of

Puducherry Region
31. Water Supply (Public Health)
Page No.: 614
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

common,M.S. Base plate,foundation


bolts,etc.complete with suitable suction
and delivery sizes.(20 HP centrifugal motor
and pumpset).

31.276.1C Supplying of electricallly operated no 2,79,211.06


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(25 HP centrifugal motor
and pumpset).

31.276.1D Supplying of electricallly operated no 3,36,652.43


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(30 HP centrifugal motor
and pumpset).

31.276.1E Supplying of electricallly operated no 4,15,968.88


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(40 HP centrifugal motor
and pumpset).

31.276.1F Supplying of electricallly operated no 4,63,022.48


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(50 HP centrifugal motor
and pumpset).

Puducherry Region
31. Water Supply (Public Health)
Page No.: 615
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.276.1G Supplying of electricallly operated no 4,82,252.39


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(60 HP centrifugal motor
and pumpset).

31.276.1H Supplying of electricallly operated no 6,01,780.45


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(75 HP centrifugal motor
and pumpset).

31.276.1I Supplying of electricallly operated no 9,96,227.50


horizontal split casing pump and
motor(JYOTHI/KIRLOSKAR/BEACON) make AC 3
phase,415 volts,50 HZ,1500 RPM,squirrel
cage motor.The pump shall have bronze
impeller,high grade steel shaft,flexible
coupling set,including the cost of
common,M.S. Base plate,foundation
bolts,etc.complete with suitable suction
and delivery sizes.(100 HP centrifugal
motor and pumpset).

31.277.1A Supplying and fixing of 20 X 20 mm size no 35,003.26


vaccum pump (KIRLOSKAR/MAXWELL/DEKKAR) make
3 phase monoblock motor and pumpset
complete.-0.75 KW/1 HP

31.277.1B Supplying and fixing of 25 X 25 mm size no 69,486.89


vaccum pump (KIRLOSKAR/MAXWELL/DEKKAR) make
3 phase monoblock motor and pumpset
complete.-2.2 KW/3 HP

31.277.1C Supplying and fixing of 40 X 40 mm size no 1,81,994.52


vaccum pump (KIRLOSKAR/MAXWELL/DEKKAR) make
3 phase monoblock motor and pumpset
complete.-3.7 KW/5 HP

31.277.2A Providing and erecting lightning arrestor Each 17,919.03

Puducherry Region
31. Water Supply (Public Health)
Page No.: 616
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with required earthing which includes the


cost of 25mmX6mm thick copper plate copper
spike to earth pits fitted over non
conductor of electric current with an
interval of 90 cm from ground level to top
the structure,copper spike of standard
size-2 nos of earth pit of 0.3m dia
borehole lowered with 40mm dia G.I class B
pipe 3.05 m deep (perforated and jointed
with G.I funnel) with charcoal and salt
covered with 0.45 m dia circular precast
ring of 0.6m deep with circular precast
cover slab etc.

31.277.2B Providing and fixing 140 mm dia uPVC pipe Each 241.74
of length 60 cm including uPVC cowl 140 mm
dia etc, complete.

31.277.2C Providing chemical injection treatment in Each 139.85


the form of pressure grouting to side walls
of OHT/sump CM 1:3 curing etc,complete.

31.278.1A Erection,testing and commissioning of the no 8,415.83


centrifugal motor pumpset with pipe
fittings,etc.complete.- 15 HP to 25 HP
motor.

31.278.1B Erection,testing and commissioning of the no 11,221.10


centrifugal motor pumpset with pipe
fittings,etc.complete.- 30 HP to 50 HP
motor.

31.278.1C Erection,testing and commissioning of the no 16,831.65


centrifugal motor pumpset with pipe
fittings,etc.complete.- 60 HP to 75 HP
motor.

31.278.1D Erection,testing and commissioning of the no 28,052.75


centrifugal motor pumpset with pipe
fittings,etc.complete.- 100 HP motor.

31.279.1A Erection, testing and commissioning of job 5,000.00


motor and pumpset complete.The rate
includes obtaining electricity service
connection from Electricity Department
also.

31.279.1B Testing including transporation of standby job 400.00


submersible motor and pumpset.

31.280.1A Supplying of 3 phase, 415 volts, 50 no 5,20,143.15


cycles, 0.8 power factor for electric

Puducherry Region
31. Water Supply (Public Health)
Page No.: 617
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

starting diesel generator comprising the


following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) air cooled and shall
be of multi stroke, multi cylinders, cold
starting, developing not less than 43 BHP
under normal temperature and pressure. The
engine shall conform to I.S. 10002 with
latest amendments. It shall be capable of
taking 10% over load for one hour in every
12 hours of continous operation including 6
Nos. of anti vibration pads.The engine
shall be complete with the following
accessories:Electrical starting provision,
engine cooling fan, fuel and lubricating
oil filters, oil bath, air filter, lub oil
pressure gauge 90 litres capacity fuel
tank mounted with engine, hour meter with
exhaust manifold, flexible pipe, 12 /24
volts electric starting equipment complete
with starter, alternator and one 12 volts
with 19 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The

Puducherry Region
31. Water Supply (Public Health)
Page No.: 618
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Acoustic enclosure shall be Type test


approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 30 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating

Puducherry Region
31. Water Supply (Public Health)
Page No.: 619
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

instruments shall be mounted on the control


panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make) -30 KVA / 24 KW
Generator set (Air cooled)

31.280.1B Supplying of 3 phase, 415 volts, 50 no 5,28,944.30


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) air cooled and shall
be of multi stroke, multi cylinders, cold
starting, developing not less than 56 BHP
under normal temperature and pressure. The
engine shall conform to I.S. 10002 with
latest amendments. It shall be capable of
taking 10% over load for one hour in every
12 hours of continous operation including 6
Nos. of anti vibration pads.The engine
shall be complete with the following
accessories:Electrical starting provision,
engine cooling fan, fuel and lubricating
oil filters, oil bath, air filter, lub oil
pressure gauge 90 litres capacity fuel tank
mounted with engine, hour meter with
exhaust manifold, flexible pipe, 12 /24
volts electric starting equipment complete
with starter, alternator and one 12 volts
with 19 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be

Puducherry Region
31. Water Supply (Public Health)
Page No.: 620
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

provided to canopy, one door shall have


glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 40KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally

Puducherry Region
31. Water Supply (Public Health)
Page No.: 621
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

conforming to I.S.4722 under normal


condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-40 KVA / 32 KW
Generator set (Air cooled)

31.280.1C Supplying of 3 phase, 415 volts, 50 no 6,80,783.43


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) air cooled and shall
be of multi stroke, multi cylinders, cold
starting, developing not less than 65BHP
under normal temperature and pressure. The
engine shall conform to I.S. 10002 with
latest amendments. It shall be capable of
taking 10% over load for one hour in every
12 hours of continous operation including 6
Nos. of anti vibration pads.The engine
shall be complete with the following
accessories:Electrical starting provision,
engine cooling fan, fuel and lubricating
oil filters, oil bath, air filter, lub oil
pressure gauge 140 litres capacity fuel
tank mounted with engine, hour meter with
exhaust manifold, flexible pipe, 12 /24
volts electric starting equipment complete

Puducherry Region
31. Water Supply (Public Health)
Page No.: 622
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with starter, alternator and one 12 volts


with19 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting

Puducherry Region
31. Water Supply (Public Health)
Page No.: 623
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the above engine and alternator.Standard


Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 50 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-50 KVA / 40 KW
Generator set (Air cooled)

31.280.1D Supplying of 3 phase, 415 volts, 50 no 7,22,297.13


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) air cooled and shall

Puducherry Region
31. Water Supply (Public Health)
Page No.: 624
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

be of multi stroke, multi cylinders, cold


starting, developing not less than 83 BHP
under normal temperature and pressure. The
engine shall conform to I.S. 10002 with
latest amendments. It shall be capable of
taking 10% over load for one hour in every
12 hours of continous operation including 6
Nos. of anti vibration pads.The engine
shall be complete with the following
accessories:Electrical starting provision,
engine cooling fan, fuel and lubricating
oil filters, oil bath, air filter, lub oil
pressure gauge140 litres capacity fuel tank
mounted with engine, hour meter with
exhaust manifold, flexible pipe, 12 /24
volts electric starting equipment complete
with starter, alternator and one 12 volts
with 21 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at

Puducherry Region
31. Water Supply (Public Health)
Page No.: 625
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

1-meter distance from all four sides shall


be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 62.5 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3

Puducherry Region
31. Water Supply (Public Health)
Page No.: 626
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Nos. of suitable current transformers2 Nos.


of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-62.5 KVA / 50 KW
Generator set (Air cooled)

31.280.1E Supplying of 3 phase, 415 volts, 50 no 7,22,795.06


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) water cooled and
shall be of multi stroke, multi cylinders,
cold starting, developing not less than 105
BHP under normal temperature and pressure.
The engine shall conform to I.S. 10002 with
latest amendments. It shall be capable of
taking 10% over load for one hour in every
12 hours of continous operation including 6
Nos. of anti vibration pads.The engine
shall be complete with the following
accessories:Electrical starting provision,
engine cooling fan, fuel and lubricating
oil filters, oil bath, air filter, lub oil
pressure gauge 200 litres capacity fuel
tank mounted with engine, hour meter with
exhaust manifold, flexible pipe, 12 /24
volts electric starting equipment complete
with starter, alternator and one 12 volts
with 21 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in

Puducherry Region
31. Water Supply (Public Health)
Page No.: 627
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

construction and designed for mounting


engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 75 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller

Puducherry Region
31. Water Supply (Public Health)
Page No.: 628
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

bearings complete.Control PanelA


wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-75 KVA / 60 KW
Generator set (Water cooled)

31.280.1F Supplying of 3 phase, 415 volts, 50 no 7,35,011.78


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) water cooled and
shall be of multi stroke, multi cylinders,
cold starting, developing not less
than105BHP under normal temperature and
pressure. The engine shall conform to I.S.
10002 with latest amendments. It shall be
capable of taking 10% over load for one
hour in every 12 hours of continous
operation including 6 Nos. of anti
vibration pads.The engine shall be complete
with the following accessories:Electrical
starting provision, engine cooling fan,
fuel and lubricating oil filters, oil bath,
air filter, lub oil pressure gauge 200
litres capacity fuel tank mounted with
engine, hour meter with exhaust manifold,
flexible pipe, 12 /24 volts electric
starting equipment complete with starter,
alternator and one 12 volts with 21 plates
battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with

Puducherry Region
31. Water Supply (Public Health)
Page No.: 629
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Guarantee cards) of adequate capacity and


low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12

Puducherry Region
31. Water Supply (Public Health)
Page No.: 630
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Nos. (TAPARIA/GEDORGE/EVEREST make)Screw


driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 82.5KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-82.5 KVA / 66 KW
Generator set (Water cooled)

31.280.1G Supplying of 3 phase, 415 volts, 50 no 8,53,441.49


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) water cooled and
shall be of multi stroke, multi cylinders,
cold starting, developing not less
than127BHP under normal temperature and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 631
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pressure. The engine shall conform to I.S.


10002 with latest amendments. It shall be
capable of taking 10% over load for one
hour in every 12 hours of continous
operation including 6 Nos. of anti
vibration pads.The engine shall be complete
with the following accessories:Electrical
starting provision, engine cooling fan,
fuel and lubricating oil filters, oil bath,
air filter, lub oil pressure gauge 250
litres capacity fuel tank mounted with
engine, hour meter with exhaust manifold,
flexible pipe, 12 /24 volts electric
starting equipment complete with starter,
alternator and two numbers of 12 volts with
21plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB

Puducherry Region
31. Water Supply (Public Health)
Page No.: 632
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

norms. The average stabilized hot air


temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 100 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter

Puducherry Region
31. Water Supply (Public Health)
Page No.: 633
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and ammeter main switch rotary type on/off


pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-100 KVA / 80 KW
Generator set (Water cooled)

31.280.1H Supplying of 3 phase, 415 volts, 50 no 8,97,572.63


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) water cooled and
shall be of multi stroke, multi cylinders,
cold starting, developing not less than154
BHP under normal temperature and
pressure. The engine shall conform to I.S.
10002 with latest amendments. It shall be
capable of taking 10% over load for one
hour in every 12 hours of continous
operation including 6 Nos. of anti
vibration pads.The engine shall be complete
with the following accessories:Electrical
starting provision, engine cooling fan,
fuel and lubricating oil filters, oil bath,
air filter, lub oil pressure gauge 250
litres capacity fuel tank mounted with
engine, hour meter with exhaust manifold,
flexible pipe, 12 /24 volts electric
starting equipment complete with starter,
alternator and two numbers of 12 volts with
21 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting

Puducherry Region
31. Water Supply (Public Health)
Page No.: 634
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

engine and alternator, with cross members


mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 125KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA

Puducherry Region
31. Water Supply (Public Health)
Page No.: 635
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

wall/pedestal mounting (cubical type)


fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-125 KVA / 100 KW
Generator set (Water cooled)

31.280.1I Supplying of 3 phase, 415 volts, 50 no 11,60,611.28


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) water cooled and
shall be of multi stroke, multi cylinders,
cold starting, developing not less
than198BHP under normal temperature and
pressure. The engine shall conform to I.S.
10002 with latest amendments. It shall be
capable of taking 10% over load for one
hour in every 12 hours of continous
operation including 6 Nos. of anti
vibration pads.The engine shall be complete
with the following accessories:Electrical
starting provision, engine cooling fan,
fuel and lubricating oil filters, oil bath,
air filter, lub oil pressure gauge 350
litres capacity fuel tank mounted with
engine, hour meter with exhaust manifold,
flexible pipe, 12 /24 volts electric
starting equipment complete with starter,
alternator and twonumbers of 12 volts with
25 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and

Puducherry Region
31. Water Supply (Public Health)
Page No.: 636
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

low lubricating oil pressure/high


temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw

Puducherry Region
31. Water Supply (Public Health)
Page No.: 637
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

driver (30cm long) Taparia make .Screw


driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 160 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-160 KVA / 128KW
Generator set (Water cooled)

31.280.1J Supplying of 3 phase, 415 volts, 50 no 14,06,464.78


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) water cooled and
shall be of multi stroke, multi cylinders,
cold starting, developing not less than 254
BHP under normal temperature and
pressure. The engine shall conform to I.S.

Puducherry Region
31. Water Supply (Public Health)
Page No.: 638
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

10002 with latest amendments. It shall be


capable of taking 10% over load for one
hour in every 12 hours of continous
operation including 6 Nos. of anti
vibration pads.The engine shall be complete
with the following accessories:Electrical
starting provision, engine cooling fan,
fuel and lubricating oil filters, oil bath,
air filter, lub oil pressure gauge 350
litres capacity fuel tank mounted with
engine, hour meter with exhaust manifold,
flexible pipe, 12 /24 volts electric
starting equipment complete with starter,
alternator and two numbers of 12 volts with
25 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have
provision for mounting of acoustic
enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air

Puducherry Region
31. Water Supply (Public Health)
Page No.: 639
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

temperature rise with in the canopy is


maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 200 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction
suitable for manual operation, rated for
system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off

Puducherry Region
31. Water Supply (Public Health)
Page No.: 640
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pilot lamp (Standard make).1 No. input


terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-200 KVA / 160 KW
Generator set (Water cooled)

31.280.1K Supplying of 3 phase, 415 volts, 50 no 16,89,583.30


cycles, 0.8 power factor for electric
starting diesel generator comprising the
following units:-
(Kirloskar/Leyland/Ruston/Greaves
Cotton/Cummins make) water cooled and
shall be of multi stroke, multi cylinders,
cold starting, developing not less than 309
BHP under normal temperature and pressure.
The engine shall conform to I.S. 10002 with
latest amendments. It shall be capable of
taking 10% over load for one hour in every
12 hours of continous operation including 6
Nos. of anti vibration pads.The engine
shall be complete with the following
accessories:Electrical starting provision,
engine cooling fan, fuel and lubricating
oil filters, oil bath, air filter, lub oil
pressure gauge 400 litres capacity fuel
tank mounted with engine, hour meter with
exhaust manifold, flexible pipe, 12 /24
volts electric starting equipment complete
with starter, alternator and two numbers
of 12 volts with 25 plates battery of make
AMCO/STANDARD/EXIDE/DAGANITE (with
Guarantee cards) of adequate capacity and
low lubricating oil pressure/high
temperature varying engine shut down
devices.The Acoustic enclosure shall have
the following: Acoustic enclosure shall be
powder coated and fabricated out of 16 SWG
CRCA MS sheet. The silent canopy shall be
of nut bolt type construction. Powder
coating is done after seven tank surface
preparation process of sheet metal. Canopy
panel and doors shall have inside lining of
FIRE-RETARDANT foam/Rock Wool as acoustic
material. Four hinged doors shall be
provided to canopy, one door shall have
glass window for control panel.Base frame
is fabricated either in ISMC channel or in
sheet metal. The base frame is rugged in
construction and designed for mounting
engine and alternator, with cross members
mounted on AVM. The base frame shall have

Puducherry Region
31. Water Supply (Public Health)
Page No.: 641
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

provision for mounting of acoustic


enclosure and it is having provision of
lifting hook for convenient lifting of
complete set, i.e. along with canopy,
engine and alternator.Fuel tank shall be
fabricated out of 14 SWG CRCA MS sheet and
is part of base frame. It is duly painted
and fitted with inlet and outlet
connections of suitable capacity.The
Acoustic enclosure shall be Type test
approved as per CPCB norms. The average
sound level, when measure in green field
condition (ISO m3744 OR 8528 PT 10) at
1-meter distance from all four sides shall
be less than 75-dBA average or as per CPCB
norms. The average stabilized hot air
temperature rise with in the canopy is
maintained with in 10 C over and above
ambient temperature.Acoustic enclosure is
suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable
fuel filling arrangement to be provided
external to the canopy. Residential
Silencer is housed in the canopy. The
exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy,
fabricated welded construction, channel
iron / sheet metal base frame for mounting
the above engine and alternator.Standard
Tools and Spares:Double ended spanners
complete set (small and big size sets) - 12
Nos. (TAPARIA/GEDORGE/EVEREST make)Screw
driver (30cm long) Taparia make .Screw
driver (45cm long) Taparia make .Cutting
plyer.Diesel filter with elements - 2
Nos.Oil filter with elements - 1 No.All
the above accessories with complete
set.AlternatorThe alternator shall be of
Crompton/Kirloskar/ Stamford/ELGI make,
self excited, self regulated, screen
protected, drip proof alternator with
static excitation system capable of
developing 250 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally
conforming to I.S.4722 under normal
condition, the voltage regulation will be
plus or minus 5% of rated voltage. It
shall be with end shield/ball roller
bearings complete.Control PanelA
wall/pedestal mounting (cubical type)
fabricated sheet steel construction

Puducherry Region
31. Water Supply (Public Health)
Page No.: 642
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

suitable for manual operation, rated for


system output incorporating the following
devices/instruments. The panel is made of
1.6mm sheet with one/two hinged front door,
bolted back totally enclosed and vermine
proof. It shall be with all electrical
connections and internal copper wiring with
proper color codings for internal wiring.
All control equipments and indicating
instruments shall be mounted on the control
panel. The control panel shall have the
following equipments:1 No.
Amps/Volt/Frequency meter (96mm x 96 mm) 3
Nos. of suitable current transformers2 Nos.
of suitable selector switches for voltmeter
and ammeter main switch rotary type on/off
pilot lamp (Standard make).1 No. input
terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA
and above)1 No. MCCB of suitable capacity
(L&T/CROMPTON make)-250 KVA / 200 KW
Generator set (Water cooled)

31.281.1A Providing and fixing of suitable no 6,498.39


M.S.exhaust pipe including 2 Nos. of M.S.
bends (long), 7 Nos. of M.S. flanges, M.S.
pipe Class B - 5 Rm as flexible exhaust
pipe. The rate is inclusive of
transportation charges for shifting of
welding machine and gas cutting set to
site, consumption of welding rod 10 SWG and
cutting gas, providing fasterners of 10mm
bolts / nuts / washers and flange gaskets
including labour charges etc. as per IE
standard.-65 mm dia exhaust pipe (upto 40
KVA)

31.281.1B Providing and fixing of suitable job 8,089.83


M.S.exhaust pipe including 2 Nos. of M.S.
bends (long), 7 Nos. of M.S. flanges, M.S.
pipe Class B - 5 Rm as flexible exhaust
pipe. The rate is inclusive of
transportation charges for shifting of
welding machine and gas cutting set to
site, consumption of welding rod 10 SWG and
cutting gas, providing fasterners of 10mm
bolts / nuts / washers and flange gaskets
including labour charges etc. as per IE
standard.-80 mm dia exhaust pipe (From 50
KVA to 100 KVA)

31.281.1C Providing and fixing of suitable job 11,007.47

Puducherry Region
31. Water Supply (Public Health)
Page No.: 643
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

M.S.exhaust pipe including 2 Nos. of M.S.


bends (long), 7 Nos. of M.S. flanges, M.S.
pipe Class B - 5 Rm as flexible exhaust
pipe. The rate is inclusive of
transportation charges for shifting of
welding machine and gas cutting set to
site, consumption of welding rod 10 SWG and
cutting gas, providing fasterners of 10mm
bolts / nuts / washers and flange gaskets
including labour charges etc. as per IE
standard.100 mm dia exhaust pipe (From 125
KVA to 160 KVA)

31.281.1D Providing and fixing of suitable job 13,527.25


M.S.exhaust pipe including 2 Nos. of M.S.
bends (long), 7 Nos. of M.S. flanges, M.S.
pipe Class B - 5 Rm as flexible exhaust
pipe. The rate is inclusive of
transportation charges for shifting of
welding machine and gas cutting set to
site, consumption of welding rod 10 SWG and
cutting gas, providing fasterners of 10mm
bolts / nuts / washers and flange gaskets
including labour charges etc. as per IE
standard.125 mm dia exhaust pipe (From 200
KVA to 250 KVA)

31.282.1 Providing and laying of aluminium cladding sqm 1,591.44


with 50 mm thick glass wool slab with
chicken mesh and covered with 24 SWG
aluminium sheet (the rate includes double
calculation for flanges & bends) as per
I.E. standards.

31.283.1 Providing and fixing of fire safety set 6,339.24


equipments comprising 1 No. of 4.5 kg of
CO2 fire extinquisher 1m x 2m x6mm thick
rubber mat shock proof of superior quality
with two numbers of 10 litres capacity fire
buckets (red colour) with M.S. stand
arrangements etc.

31.284.1A Providing and fixing of 4 pole change over no 9,454.60


switch of STANDARD/HAVELLS/KUNDAN/ GEM make
including M.S. frame as per I.E.
standard.-100 Amps (upto 50 KVA)

31.284.1B Providing and fixing of 4 pole change over no 12,657.98


switch of STANDARD/HAVELLS/KUNDAN/ GEM make
including M.S. frame as per I.E.
standard.-200 Amps(from 62.5/63 KVA to 100
KVA)

Puducherry Region
31. Water Supply (Public Health)
Page No.: 644
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.284.1C Providing and fixing of 4 pole change over no 20,387.33


switch of STANDARD/HAVELLS/KUNDAN/ GEM make
including M.S. frame as per I.E.
standard.-400 Amps(Above 100 KVA)

31.285.1A Charges for transporting, erection, testing job 19,893.01


and commissioning of generator set
excluding foundation,but including
mechanical and other unskilled wages for
installation of equipment, wiring from
generator set to panel board and change
over switches, handling charges, purchase
of spares if any required for the
installation and commissioning, the cost of
fuel and other materials for a trial run of
6 hours. This rate also includes for
testing and commissioning of generator set
as specified, obtaining approval of
Central Electricity Authority (CEA),
payment for CEA inspection/Licence fees or
any other charges and fulfilling other
requirements and conditions laid down by
CEA-From 30 KVA to 50 KVA

31.285.1B Charges for transporting, erection, testing job 23,208.52


and commissioning of generator set
excluding foundation,but including
mechanical and other unskilled wages for
installation of equipment, wiring from
generator set to panel board and change
over switches, handling charges, purchase
of spares if any required for the
installation and commissioning, the cost of
fuel and other materials for a trial run of
6 hours. This rate also includes for
testing and commissioning of generator set
as specified, obtaining approval of
Central Electricity Authority (CEA),
payment for CEA inspection/Licence fees or
any other charges and fulfilling other
requirements and conditions laid down by
CEA-From 62.5 / 63 KVA to 100 KVA

31.285.1C Charges for transporting, erection, testing job 31,828.82


and commissioning of generator set
excluding foundation,but including
mechanical and other unskilled wages for
installation of equipment, wiring from
generator set to panel board and change
over switches, handling charges, purchase
of spares if any required for the
installation and commissioning, the cost of

Puducherry Region
31. Water Supply (Public Health)
Page No.: 645
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

fuel and other materials for a trial run of


6 hours. This rate also includes for
testing and commissioning of generator set
as specified, obtaining approval of
Central Electricity Authority (CEA),
payment for CEA inspection/Licence fees or
any other charges and fulfilling other
requirements and conditions laid down by
CEA-from 125 KVA to 200 KVA

31.285.1D Charges for transporting, erection, testing job 39,786.02


and commissioning of generator set
excluding foundation,but including
mechanical and other unskilled wages for
installation of equipment, wiring from
generator set to panel board and change
over switches, handling charges, purchase
of spares if any required for the
installation and commissioning, the cost of
fuel and other materials for a trial run of
6 hours. This rate also includes for
testing and commissioning of generator set
as specified, obtaining approval of
Central Electricity Authority (CEA),
payment for CEA inspection/Licence fees or
any other charges and fulfilling other
requirements and conditions laid down by
CEA-Above 200 KVA

31.300.1A Supply and installation of DI D/F Gate each 24,831.42


Valves (Soft seated ) Resilient seated soft
sealing gate valves (Sluice valves ) (Make
VAG,AVK,Fouress) with body bonnet of
ductile iron of grade GGG 40, wedge fully
rubber lined EPDM of good quality W720 ,
replaceable spindle nut, without gland
packing and with 3 O-ring protection on the
shaft and seals of NBR and the valves
should be vacuum tight and 100% leak proof
with face to face dimensions as per BSS
163-89/ISI 4846 - 2000/DIN3202 F4. All the
valves should be Electrostatic powder
coated both inside outside with pocket less
straight thro body passage. All the valves
shall be compatible for burried application
without chambers, with pressure rating PN
10/16 - dia 150mm

31.300.1B Supply and installation of DI D/F Gate each 41,263.69


Valves (Soft seated ) Resilient seated soft
sealing gate valves (Sluice valves ) (Make
VAG,AVK,Fouress) with body bonnet of

Puducherry Region
31. Water Supply (Public Health)
Page No.: 646
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

ductile iron of grade GGG 40, wedge fully


rubber lined EPDM of good quality W720 ,
replaceable spindle nut, without gland
packing and with 3 O-ring protection on the
shaft and seals of NBR and the valves
should be vacuum tight and 100% leak proof
with face to face dimensions as per BSS
163-89/ISI 4846 - 2000/DIN3202 F4. All the
valves should be Electrostatic powder
coated both inside outside with pocket less
straight thro body passage. All the valves
shall be compatible for burried application
without chambers, with pressure rating PN
10/16 - dia 200mm

31.300.1C Supply and installation of DI D/F Gate each 86,822.18


Valves (Soft seated ) Resilient seated soft
sealing gate valves (Sluice valves ) (Make
VAG,AVK,Fouress) with body bonnet of
ductile iron of grade GGG 40, wedge fully
rubber lined EPDM of good quality W720 ,
replaceable spindle nut, without gland
packing and with 3 O-ring protection on the
shaft and seals of NBR and the valves
should be vacuum tight and 100% leak proof
with face to face dimensions as per BSS
163-89/ISI 4846 - 2000/DIN3202 F4. All the
valves should be Electrostatic powder
coated both inside outside with pocket less
straight thro body passage. All the valves
shall be compatible for burried application
without chambers, with pressure rating PN
10/16 - dia 300 mm

31.300.1D Supply and installation of DI D/F Gate each 2,39,718.65


Valves (Soft seated ) Resilient seated soft
sealing gate valves (Sluice valves ) (Make
VAG,AVK,Fouress) with body bonnet of
ductile iron of grade GGG 40, wedge fully
rubber lined EPDM of good quality W720 ,
replaceable spindle nut, without gland
packing and with 3 O-ring protection on the
shaft and seals of NBR and the valves
should be vacuum tight and 100% leak proof
with face to face dimensions as per BSS
163-89/ISI 4846 - 2000/DIN3202 F4. All the
valves should be Electrostatic powder
coated both inside outside with pocket less
straight thro body passage. All the valves
shall be compatible for burried application
without chambers, with pressure rating PN
10/16 - dia 400mm

Puducherry Region
31. Water Supply (Public Health)
Page No.: 647
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.300.1E Supply and installation of DI D/F Swing each 52,276.01


check valves / non return valves (Make VAG,
AVK, Fouress) with body and disk of ductile
iron GGG 40/SG 400-12 or equivalent grade
as per IS 3896 PART 2-1985 and subsequent
revision and disc encapsulated with minimum
thickness of 250 microns powder or liquid
epoxy coating applied on both body and disc
inside and outside, with pressure PN 16 -
dia 150mm

31.300.2A Supply and installation of Electromagnetic each 1,34,887.87


bulk flow meters with make (KROHNE /
YOKOGAWA / EMERSON) which satisfies the
specification as under - Electromagnetic
flow sensor- type : Microprocessor
based/pulsed DC - flow tube : SS304 - Coil
housing: Fully welded sheet steel,- Liner :
Teflon - Electrodes :SS316 - Grounding type
: Rings - Grounding ring material :SS316 -
Process connection : Flanged to ANSI 150# -
Flange :CS,SORF- Area classification :safe
- Protection class : IP 67 - IP 68
(underground) - Accuracy : + 0.5% of
measured value - Outputs : 4-20ma, HART +
Pulse - Status - Display : Digital -
Parameters : Actual flow rate,totalized
flow (8 digit) - Local indication :
Programmable , front fascia programming -
Power supply : 230 VAC -100 mm dia

31.300.2B Supply and installation of Electromagnetic each 2,01,850.39


bulk flow meters with make (KROHNE /
YOKOGAWA / EMERSON) which satisfies the
specification as under - Electromagnetic
flow sensor- type : Microprocessor
based/pulsed DC, - flow tube : SS304, -
Coil housing: Fully welded sheet steel,-
Liner : Teflon ,- Electrodes :SS316, -
Grounding type : Rings ,- Grounding ring
material :SS316, - Process connection :
Flanged to ANSI 150#,- Flange :CS,SORF,-
Area classification :safe, - Protection
class : IP 67 - IP 68 (underground) ,-
Accuracy : + 0.5% of measured value ,-
Outputs : 4-20ma, HART + Pulse - Status -
Display : Digital, - Parameters : Actual
flow rate,totalized flow (8 digit), - Local
indication : Programmable , front fascia
programming, - Power supply : 230 VAC, -200
mm dia

Puducherry Region
31. Water Supply (Public Health)
Page No.: 648
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

31.300.2C Supply and installation of Electromagnetic each 2,69,775.74


bulk flow meters with make (KROHNE /
YOKOGAWA / EMERSON) which satisfies the
specification as under - Electromagnetic
flow sensor- type : Microprocessor
based/pulsed DC - flow tube : SS304 - Coil
housing: Fully welded sheet steel,- Liner :
Teflon - Electrodes :SS316 - Grounding type
: Rings - Grounding ring material :SS316 -
Process connection : Flanged to ANSI 150# -
Flange :CS,SORF- Area classification :safe
- Protection class : IP 67 - IP 68
(underground) - Accuracy : + 0.5% of
measured value - Outputs : 4-20ma, HART +
Pulse - Status - Display : Digital -
Parameters : Actual flow rate,totalized
flow (8 digit) - Local indication :
Programmable , front fascia programming -
Power supply : 230 VAC -300 mm dia

31.300.2D Supply and installation of Electromagnetic each 3,96,835.42


bulk flow meters with make (KROHNE /
YOKOGAWA / EMERSON) which satisfies the
specification as under - Electromagnetic
flow sensor- type : Microprocessor
based/pulsed DC - flow tube : SS304 - Coil
housing: Fully welded sheet steel,- Liner :
Teflon - Electrodes :SS316 - Grounding type
: Rings - Grounding ring material :SS316 -
Process connection : Flanged to ANSI 150# -
Flange :CS,SORF- Area classification :safe
- Protection class : IP 67 - IP 68
(underground) - Accuracy : + 0.5% of
measured value - Outputs : 4-20ma, HART +
Pulse - Status - Display : Digital -
Parameters : Actual flow rate,totalized
flow (8 digit) - Local indication :
Programmable , front fascia programming -
Power supply : 230 VAC -400 mm dia

Puducherry Region
32. Sewerage (Public Health)
Page No.: 649
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.2.1 Providing and laying cement concrete 1:5:10 metre 678.57


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround S.W.
pipes including bed concrete as per
standard design - 100 mm diameter.

32.4.1.2 Providing and fixing square-mouth S.W. each 1,623.65


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 100 x 100
mm size P type.

32.4.2.2 Providing and fixing square-mouth S.W. each 2,086.68


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 125 x
100 mm size P type.

32.4.4.2 Providing and fixing square-mouth S.W. each 1,642.82


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 180 x
100 mm size P type.

32.4.5.2 Providing and fixing square-mouth S.W. each 1,642.22


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 180 x
150 mm size P type.

32.5.1 Dismantling of old S.W. pipes including metre 31.93


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materials into municipal
dumps - 100 mm diameter

Puducherry Region
32. Sewerage (Public Health)
Page No.: 650
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.5.2 Dismantling of old S.W. pipes including metre 35.18


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materials into municipal
dumps - 150 mm diameter

32.5.3 Dismantling of old S.W. pipes including metre 37.35


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materials into municipal
dumps - 200 mm diameter

32.5.4 Dismantling of old S.W. pipes including metre 38.44


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materials into municipal
dumps - 230 mm dia.

32.5.5 Dismantling of old S.W. pipes including metre 39.52


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materials into municipal
dumps - 250 mm diameter

32.5.6 Dismantling of old S.W. pipes including metre 41.69


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materiasl into municipal
dumps - 300 mm diameter

32.5.7 Dismantling of old S.W. pipes including metre 48.11


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materials into municipal
dumps - 350 mm diameter

32.5.8 Dismantling of old S.W. pipes including metre 52.59


breaking of joints and bed concrete
stacking of useful materials near the site
within 50 m lead and disposal of
unserviceable materials into municipal
dumps - 400 mm diameter

32.5.9 Dismantling of old S.W. pipes including metre 54.76


breaking of joints and bed concrete
stacking of useful materials near the site

Puducherry Region
32. Sewerage (Public Health)
Page No.: 651
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

within 50 m lead and disposal of


unserviceable materials into municipal
dumps - 450 mm diameter

32.6.1 Providing and laying non-pressure NP2 class metre 309.74


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 100 mm dia.

32.6.2 Providing and laying non-pressure NP2 class metre 385.69


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 150 mm dia.

32.6.3 Providing and laying non-pressure NP2 class metre 485.87


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 250 mm dia.

32.6.4 Providing and laying non-pressure NP2 class metre 1,011.82


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 300 mm dia.

32.6.5 Providing and laying non-pressure NP2 class metre 1,393.49


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 450 mm dia.

32.6.10 Providing and laying non-pressure NP2 class metre 3,047.93


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 900 mm dia.

32.11.1.2 Constructing brick masonry manhole with 35 each 8,253.53


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8

Puducherry Region
32. Sewerage (Public Health)
Page No.: 652
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

mix (1 cement : 4 coarse sand : 8 graded


stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement complete as
per standard design - inside size 90 x 80
cm and 45 cm deep including C.I. cover with
frame (light duty) 455 x 610 mm internal
dimensions total weight of cover and frame
to be not less than 38 kg. (weight of cover
23 kg. and weight of frame 15 kg) - with
bricks of class designation 35.

32.11.2.2 Constructing brick masonry manhole with 35 each 9,094.41


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40mm nominal size) inside
plastering 12mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) neatly
finished complete as per standard design -
inside size 90 x 80cm and 60cm deep
including C.I. cover with frame (light
duty) 455 x 610mm internal dimensions total
weight of cover and frame to be not less
than 38 kg. (weight of cover 23 kg. and
weight of frame 15 kg.) - with bricks of
class designation 35.

32.11.3.2 Constructing brick masonry manhole with 35 each 14,813.52


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1

Puducherry Region
32. Sewerage (Public Health)
Page No.: 653
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement : 2 coarse sand : 4 graded stone


aggregate 20 mm nominal size) finished with
a floating coat of nean cement complete as
per standard design - inside size 120 x 90
cm and 90 cm deep including C.I. cover with
frame (medium duty) 500 mm internal
diameter, total weight of cover and frame
to be not less than 116 kg. (weight of
cover 58 kg. and weight of frame 58 kg) -
with bricks of class designation 35.

32.11.4.2 Constructing brick masonry manhole with 35 each 16,273.00


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of nean cement complete as
per standard design - inside size 120 x 90
cm and 90 cm deep including C.I. cover with
frame (heavy duty) 560 mm internal
diameter, total weight of cover and frame
to be not less than 208 kg. (weight of
cover 108 kg. and weight of frame 100 kg)
- with bricks of class designation 35.

32.12.1.2 Extra for depth for manholes - size of 90 x metre 5,557.90


80 cm - with bricks of class designation
35.

32.12.2.2 Extra for depth for manholes - size 120 x metre 6,659.43
90 cm - with bricks of class designation
35.

32.17.1 Providing M.S. foot rests including fixing each 280.85


in manholes with 20 x 20 x 10 cm cement
concrete blocks 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm
nominal size) as per standard design - with
20 x 20 mm square bar.

32.17.2 Providing M.S. foot rests including fixing each 248.30


in manholes with 20 x 20 x 10 cm cement
concrete blocks 1:3:6 (1 cement : 3 coarse

Puducherry Region
32. Sewerage (Public Health)
Page No.: 654
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sand : 6 graded stone aggregate 20 mm


nominal size) as per standard design - with
20 mm diameter round bar.

32.18.1 Replacement of M.S. foot rest in manhole each 337.40


including dismantling concrete blocks and
fixing with 20 x 20 x 10 cm cement concrte
blocks 1:3:6 ( 1 Cement : 3 coarse Sand : 6
grade stone aggregate 20mm nominal size )
with 20 x 20 mm square bar.

32.18.2 Replacement of M.S foot rests in manhole each 304.85


including dismantling concrete blocks and
fixing with 20 x 20 x 10 cm cement concrete
blocks 1:3:6 ( 1 cement : 3 coarse sand : 6
grade stone aggregate 20 mm nominal size)
with 20 mm diamter round bar.

32.19.1 supplying and fixing C.I. cover without No 661.16


frame for manholes - 455 x 610 mm
rectangular C.I. cover (light duty) the
weight of the cover to be not less than 23
kg.

32.19.2 supplying and fixing C.I. cover without No 1,493.06


frame for manholes - 500 mm diameter C.I.
cover (medium duty) the weight of the cover
to be not less than 58 kg.

32.19.3 Supplying and fixing C.I. cover without .No 2,132.04


frame for manholes - 560 mm diameter C.I.
cover (heavy duty) the weight of the cover
to be not less than 108 kg

32.19A.1.1 Providing and fixing in position precast each 1,274.65


R.C.C manhole cover and frame of reqired
shape and approved quality - LD - 2.5 -
rectangular shape 600 x 450 mm internal
dimensions.

32.19A.1.2 Providing and fixing in position precast each 1,086.71


R.C.C manhole cover and frame of reqired
shape and approved quality - LD - 2.5 -
square shape 450 mm internal dimensions

32.19A.1.3 Providing and fixing in position precast each 1,026.43


R.C.C manhole cover and frame of reqired
shape and approved quality - LD - 2.5 -
circular shape 450 mm internal diameter.

Puducherry Region
32. Sewerage (Public Health)
Page No.: 655
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.19A.2.1 Providing and fixing in position precast each 1,334.94


R.C.C manhole cover and frame of reqired
shape and approved quality - MD - 10 -
square 500 mm internal
dimensions.

32.19A.2.2 Providing and fixing in position precast each 1,286.20


R.C.C manhole cover and frame of reqired
shape and approved quality - MD - 10 -
circular shape 500 mm internal diamter

32.19A.3.1 Providing and fixing in position precast each 1,733.94


R.C.C manhole cover and frame of reqired
shape and approved quality - HD - 20 -
circular shape 560 mm internal diameter.
dimensions.

32.19A.4.1 Providing and fixing in position precast each 3,524.30


R.C.C manhole cover and frame of reqired
shape and approved quality - EHD - 35 -
circular shape 560 mm internal dia.

32.20 supplying and fixing C.I. cover 300 x 300 No 445.61


mm without frame for gully trap (standard
pattern) the weight of the cover to be not
less than 4.5 kg.

32.20.1 Providing and fixing in no 350.00


manhole,intercepting chamber with G.I chain
to a length of 1.20m,with hooks of 18cm to
be incorporated in concrete link of size
5.5cm to be fixed with manhole cover by
welding 10mm dia chain with weight not less
than 3.50 kg.The rate to include the labour
charges for fixing and welding charges
etc.,complete.

32.21.1 Making connection of drain or sewer line each 402.43


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 40
mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete. - for
pipes 100 to 230 mm diameter.

Puducherry Region
32. Sewerage (Public Health)
Page No.: 656
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.21.2 Making connection of drain or sewer line each 475.40


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 40
mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete. - for
pipes 250 to 300 mm diameter.

32.21.3 Making connection of drain or sewer line each 690.65


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20
mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete. - for
pipes 350 to 450 mm diameter.

32.22.1 Providing sand cast iron drop connection each 6,667.02


externally for 60 cm drop from branch sewer
line to main sewer manhole including
inspection and cleaning eye with chain and
lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1 cement: 5 fine sand: 10 graded stone
aggregate with 40 mm nominal size) with all
centering and shuttering required, cutting
holes in walls and making good with brick
work in cement mortar 1:5 (1 cement : 5
fine cement) plastered with cement mortar
1:3 (1 cement : 3 coarse sand) on inside of
the manhole wall lead caulkled joints
between sand cast iron pipes and fittings,
stiff cement mortar 1:1 (1 cement : 1 fine
sand) joints between sand cast iron tee and
S.W. pipe making required channels complete
as per standard design and specification. -
100 mm dia. sand cast iron drop connection.

32.22.2 Providing sand cast iron drop connection each 9,616.09


externally for 60 cm drop from branch sewer
line to main sewer manhole including
inspection and cleaning eye with chain and
lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1 cement: 5 fine sand: 10 graded stone

Puducherry Region
32. Sewerage (Public Health)
Page No.: 657
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

aggregate with 40 mm nominal size) with all


centering and shuttering required, cutting
holes in walls and making good with brick
work in cement mortar 1:5 (1 cement : 5
fine sand) plastered with cement mortar 1:3
(1 cement : 3 coarse sand) on inside of the
manhole wall lead caulkled joints between
sand cast iron pipes and fittings, stiff
cement mortar 1:1 (1 cement : 1 fine sand)
joints between sand cast iron tee and S.W.
pipe making required channels complete as
per standard design and specification. -
150 mm dia. sand cast iron drop connection.

32.23.1 Extra for depths beyond 60 cm of sand cast metre 1,897.09


iron drop connection complete. - for 100 mm
dia sand cast iron drop connection.

32.23.2 Extra for depths beyond 60 cm of sand cast metre 2,509.32


iron drop connection complete. - for 150 mm
dia sand cast iron drop connection.

32.24.1 Dismantling of manhole including R.C.C.top each 926.79


slab, C.I. cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials
into municipal dumps within 50 m lead -
Rectangular manhole 90 x 80 cm and 45 cm
deep.

32.24.2 Dismantling of manhole including R.C.C.top each 1,624.66


slab, C.I.cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials
into municipal dumps within 50 m lead -
Rectangular manhole 120 x 90 cm and 90 cm
deep.

32.24.3 Dismantling of manhole including R.C.C.top each 3,063.32


slab,C.I.cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials
into municipal dumps within 50 m lead -
Rectangular arch type manhole 140 x 90 cm
and 2.45 m deep.

32.24.4 Dismantling of manhole including R.C.C.top each 1,950.68


slab, C.I.cover with frame including
stacking of useful materials near the site
and disposal of unserviceable materials
into municipal dumps within 50 m lead -
Circular manhole 122 cm diameter and 1.68 m

Puducherry Region
32. Sewerage (Public Health)
Page No.: 658
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

deep.

32.25.1 Extra for depth of manholes metre 736.13


dismantled-rectangular manhole 90 x 80 cm
and 45cm deep

32.25.2 Extra for depth of manholes dismantled - metre 876.66


rectangular manhole 120 x 90 cm and 90 cm
deep.

32.25.3 Extra for depth of manholes dismantled - meter 710.51


rectangular arch type manhole 140 x 90 cm
and 2.45 m deep. (upto 4.25 m depth)

32.26A Providing R.C.C.spun vent shaft with cowl each 13,025.76


140 mm and 200 mm internal and external
dia. respectively at top 300 and 450 mm
internal and external dia. respectively at
bottom and 9.10 m overall length, bottom
1.25 m below ground level fixed in a pit 90
x 90 x 150 cm with cement concrete 1:4:8 (1
cement : 4 sand : 8 graded stone aggregate
20 mm nominal size) 25 cm in bed and
minimum 20 cm alround with top 15 cm in
cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size), junction of vent shaft and
concrete grouted with cement mortar 1:1 (1
cement : 1 fine sand) including making
connection with sewer manhole with 150 mm
dia. cement concrete pipe of required
length complete as per standard design.

32.27.2 Constructing brick masonry road gully each 4,227.30


chamber 50x45x60cm with bricks of class
designation 35 in cement mortar 1:4 (1
cement : 4 coarse sand) including 500x450mm
precast R.C.C. horizontal grating with
frame complete as per standard design:-
With Class 35 designation bricks.

32.28.2 Constructing brick masonry road gully each 4,619.81


chamber 45x45x77.5cm with bricks of class
designation 35 in cement mortar 1:4 (1
cement : 4 coarse sand) with precast R.C.C.
vertical grating complete as per standard
design - with class designation 35 bricks.

32.29.2 Constructing brick masonry road gully each 7,859.85


chamber 110x50x77.5cm with bricks of class
designation 35 in cement mortar 1:4 (1
cment : 4 fine sand) including 500x450mm

Puducherry Region
32. Sewerage (Public Health)
Page No.: 659
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

precast R.C.C. horizontal grating with


frame and vertical grating complete as per
standard design:-with class designation 35
bricks.

32.33.1.2 Constructing brick masonry chamber for each 4,412.09


underground C.I.inspection chamber and
bends with 35 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand) C.I. cover with frame (light duty)
455x610 mm internal dimensions, total
weight of cover with frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) R.C.C. top slab with
1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
foundation concrete 1:5:10 (1 cement : 5
coarse sand : 10 graded stone aggregate 40
mm nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement :3
coarse sand) finished smooth with a
floating coat of neat cement on walls and
bed concrete etc. complete as per standard
design - inside dimensions 455 x 610 mm and
45 cm deep for single pipe line. - With 35
class designation bricks.

32.33.2.2 Constructing brick masonry chamber for each 5,209.56


underground C.I.inspection chamber and
bends with 35 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand) C.I. cover with frame (light duty)
455x 610 mm internal dimensions, total
weight of cover with frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) R.C.C. top slab with
1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement :3
coarse sand) finished smooth with a
floating coat of neat cement on walls and
bed concrete etc. complete as per standard
design - inside dimensions 500 x 700 mm and
45 cm deep for pipe line with one or two
inlets.

32.33.3.2 Constructing brick masonry chamber for each 6,124.60


underground C.I.inspection chamber and
bends with 35 class designation bricks in

Puducherry Region
32. Sewerage (Public Health)
Page No.: 660
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement mortar 1:4 (1 cement : 4 coarse


sand) C.I. cover with frame (light duty)
455x610 mm internal dimensions, total
weight of cover with frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) R.C.C. top slab with
1:2:4 mix (1 cement : 2 sand : 4 graded
stone aggregate 20 mm nominal size)
foundation concrete 1:5:10 (1 cement : 5
sand : 10 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement :3
sand) finished smooth with a floating coat
of neat cement on walls and bed concrete
etc. complete as per standard design -
inside dimensions 600 x 850 mm and 45 cm
deep for pipe line with three or more
inlets.

32.34.1.2 Extra for depth beyond 45 cm of brick metre 3,865.03


masonry chamber - for 455x610 mm size with
bricks of class designation 35.

32.34.2.2 Extra for depth beyond 45 cm of brick metre 4,217.01


masonry chamber - for 500x700 mm size with
bricks of class designation 35.

32.34.3.2 Extra for depth beyond 45 cm of brick metre 4,911.46


masonry chamber - for 600 x 850 mm size
with bricks of class designation 35.

32.35.1.2 Constructing brick masonry open surface metre 638.80


drain with bricks of class designation 35
in cement mortar 1 : 4 (1 cement : 4 fine
sand) including earth excavation, 10 cm
thick bed concrete 1 : 5 : 10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size and 25 mm thick cement
concrete 1 : 2 : 4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 12.5 mm
nominal size) for filling haunches
including 12 mm cement plaster 1 : 4 (1
cement : 4 coarse sand) with a floating
coat of neat cement inside the drain, its
top and exposed side including disposal of
surplus earth complete as per standard
design - 10 cm drain 20 cm average depth
with class designation 35 bricks.

32.35.2.2 Constructing brick masonry open surface metre 672.32


drain with class designation 35 in cement
mortar 1 : 4 (1 cement : 4 fine sand)

Puducherry Region
32. Sewerage (Public Health)
Page No.: 661
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including earth excavation, 10 cm thick bed


concrete 1 : 5 : 10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm
nominal size and 25 mm thick cement
concrete 1 : 2 : 4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 12.5 mm
nominal size) for filling haunches
including 12 mm cement plaster 1 : 4 (1
cement : 4 coarse sand) with a floating
coat of neat cement inside the drain, its
top and exposed side including disposal of
surplus earth complete as per standard
design - 15 cm drain 20 cm average depth -
with brick class designation 35.

32.35.3.2 Constructing brick masonry open surface metre 915.07


drain with class designation 35 in cement
mortar 1:4 (1 cement : 4 fine sand)
including earth excavation, 10 cm thick bed
concrete 1:5:10 (1 cement : 5 fine sand :
10 graded stone aggregate 40 mm nominal
size and 25 mm thick cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 12.5 mm nominal size) for filling
haunches including 12 mm cement plaster 1:4
(1 cement : 4 coarse sand) with a floating
coat of neat cement inside the drain, its
top and exposed side including disposal of
surplus earth complete as per standard
design - 25 cm drain 30 cm average depth -
with brick class designation 35.

32.39.2 Making soak pit 2.5m diameter 3.0 metre each 15,509.93
deep with 45x45cm dry brick honey comb
shaft with bricks of class designation 35
and S.W drain pipe 100mm diameter, 1.8m
long complete as per standard design -
with brick of class designation 35.

32.40.1A Cutting open B.T. Road or macadam road for cum 293.70
laying water main / sewer lines and
stacking the usable materials on road side
for reuse in road works.

32.40.1B Cutting open concrete road for laying water cum 411.40
main/sewer lines & stacking the usable
materials on road side for reuse in road
works.

32.40.2A Earth work excavation above water level and cum 134.47
depositing on bank in sandy silt or other
soil, wet sand or silt, light black cotton

Puducherry Region
32. Sewerage (Public Health)
Page No.: 662
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

soil or clay, sandy loam and ordinary soil


for I.C's manhole, well, infiltration,
suction well including driving shoring
materials etc., for excavation purpose and
removing the shoring materials and
refilling the trenches with excavated earth
complying with standard specifications
etc., complete.For first depth of 2 metres
(using open timbering)

32.40.2B Earth work excavation above water level and cum 266.65
depositing on bank in sandy silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam & ordinary soil
for I.C's man hole, well, infiltration,
suction well including driving shoring
materials etc. for excavation purpose and
removing the shoring materials and
refilling the trenches with excavated earth
complying with standard specification.,
complete - For first depth of 2 metres
(using close timbering).

32.40.2C Earth work excavation above water level and cum 293.15
depositing on bank in sandy silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for I.C's manhole, well, infiltration,
suction well including driving shoring
materials etc.,for excavation purpose and
removing the shoring materials and
refilling the trenches with excavated earth
complying with standard specifications
etc., complete - For second depth of 2
metres (using close timbering)

32.40.2D Earth work excavation above water level and cum 485.12
depositing on bank in sandy silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for I.C's manhole, well, infiltration,
suction well including driving shoring
materials etc.,for excavation purpose and
removing the shoring materials and
refilling the trenches with excavated earth
complying with standard specifications
etc., complete - For third depth of 2
metres (using close timbering)

32.41.1A Earth work excavation below water level and cum 876.00
depositing on bank in sandy,silt or other
soil, wet sand or silt, light black cotton

Puducherry Region
32. Sewerage (Public Health)
Page No.: 663
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

soil or clay, sandy loam and ordinary soil


for I.Cs, manhole, well, infiltration well,
suction well,siphon or connecting pipe line
including driving shoring materials etc,.
for excavation purpose and removing the
shoring materials and pumping out water
caused by spring or tidal or river seepage
using diesel engine and refilling with
excavated earth complying with standard
specification etc. complete. - For first
depth of 2 metre (using close timbering).

32.41.1B Earth work excavation below water level and cum 1,207.00
depositing on bank in sandy silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for I.Cs, manhole, well, infiltration well,
suction well,siphon or connecting pipe line
including driving shoring materials etc,
for excavation purpose and removing the
shoring materials and pumping out water
caused by spring or tidal or river seepage
using diesel engine and refilling with
excavated earth complying with standard
specification etc. complete. - For second
depth of 2 metre (using close timbering).

32.41.1C Earth work excavation below water level and cum 1,864.00
depositing on bank in sandy silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for I.Cs, manhole, well, infiltration well,
suction well,siphon or connecting pipe line
including driving shoring materials etc,
for excavation purpose and removing the
shoring materials and pumping out water
caused by spring or tidal or river seepage
using diesel engine and refilling with
excavated earth complying with standard
specification etc. complete.- For third
depth of 2 metre (using close timbering).

32.41.1D Earth work excavation below water level and cum 2,895.00
depositing on bank in sandy silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for I.Cs, manhole, well, infiltration well,
suction well,siphon or connecting pipe line
including driving shoring materials etc,
for excavation purpose and removing the
shoring materials and pumping out water
caused by spring or tidal or river seepage

Puducherry Region
32. Sewerage (Public Health)
Page No.: 664
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

using diesel engine and refilling with


excavated earth complying with standard
specification etc. complete - For fourth
depth of 2 metre (using close timbering)

32.41.2A Earth work excavation above water level and cum 183.69
depositing on bank in sandy, silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for infiltration, gallery siphon or
connecting pipe line including driving
shoring materials as mentioned below.
Removing the shoring materials and
refilling with excavated earth complying
with standard specification etc., complete.
- First depth of 2m (using open timbering)

32.41.2B Earth work excavation above water level and cum 293.79
depositing on bank in sandy, silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for infiltration, gallery siphon or
connecting pipe line including driving
shoring materials as mentioned below.
Removing the shoring materials and
refilling with excavated earth complying
with standard specification etc., complete.
- First depth of 2m (using close
timbering)

32.41.2C Earth work excavation above water level and cum 321.20
depositing on bank in sandy, silt or other
soil, wet sand or silt, light black cotton
soil or clay, sandy loam and ordinary soil
for infiltration, gallery siphon or
connecting pipe line including driving
shoring materials as mentioned below.
Removing the shoring materials and
refilling with excavated earth complying
with standard specification etc., complete.
- Second depth of 2m (using close
timbering)

32.41.2D Earth work excavation above water level and cum 397.60
depositing on bank in sandy, silt or other
soil, wet sand or silt, light black cotton
soil or clay,sandy loam and ordinary soil
for infiltration, gallery siphon or
connecting pipe line including driving
shoring materials as mentioned below.
Removing the shoring materials and
refilling with excavated earth complying

Puducherry Region
32. Sewerage (Public Health)
Page No.: 665
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with standard specification etc., complete.


- Third depth of 2m (using close
timbering)

32.42.1A Sinking well of 1.25m to 2.0m internal dia metre 808.00


below water level including all incidental
charges, such as bailing and pumping of
water, using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For first
depth of 2 metres

32.42.1B Sinking well of 1.25m to 2.0m internal dia metre 1,615.00


below water level including all incidental
charges such as bailing and pumping of
water,using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For
second depth of 2 metres.

32.42.1C Sinking well of 1.25m to 2.0m internal dia metre 3,233.00


below water level including all incidental
charges such as bailing and pumping of
water, using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For third
depth of 2 metres.

32.42.1D Sinking well of 1.25m to 2.0m internal dia metre 5,700.00


below water level including all incidental
charges such as bailing and pumping of
water, using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For fourth
depth of 2 metres

32.42.2A Sinking well of 4 metre internal dia below metre 2,430.00


water level including all incidental
charges such as bailing and pumping of
water, using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For first
depth of 2m.

32.42.2B Sinking well of 4 metre internal dia below metre 4,662.00


water level including all incidental
charges such as bailing and pumping of
water, using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For second
depth of 2m.

Puducherry Region
32. Sewerage (Public Health)
Page No.: 666
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.42.2C Sinking well of 4 metre internal dia below metre 9,305.00


water level including all incidental
charges such as bailing and pumping of
water, using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For third
depth of 2m.

32.42.2D Sinking well of 4 metre internal dia below metre 17,449.00


water level including all incidental
charges such as bailing and pumping of
water,using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For fourth
depth of 2m.

32.42.2E Sinking well of 4 metre internal dia below metre 32,574.00


water level including all incidental
charges such as bailing and pumping of
water,using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For fifth
depth of 2m.

32.42.3A Sinking well of 6 metre internal dia below metre 5,079.00


water level including all incidental
charges such as bailing and pumping of
water, using special tools and plants etc.,
complete in ordinary soil,loose soil,sandy
soil and clay soil. - For first depth of
2m.

32.42.3B Sinking well of 6 metre internal dia below metre 9,831.00


water level including all incidental
charges such as bailing and pumping of
water, using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For second
depth of 2m.

32.42.3C Sinking well of 6 metre internal dia below metre 19,279.00


water level including all incidental
charges such as bailing and pumping of
water,using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For third
depth of 2m.

32.42.3D Sinking well of 6 metre internal dia below metre 36,811.00


water level including all incidental
charges such as bailing and pumping of
water,using special tools and plants

Puducherry Region
32. Sewerage (Public Health)
Page No.: 667
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

etc.,complete in ordinary soil,loose


soil,sandy soil and clay soil. - For fourth
depth of 2m.

32.42.3E Sinking well of 6 metre internal dia below metre 68,717.00


water level including all incidental
charges such as bailing and pumping of
water,using special tools and plants
etc.,complete in ordinary soil,loose
soil,sandy soil and clay soil. - For fifth
depth of 2m.

32.45.1 Construction of manhole with foundation no 21,067.12


concrete for 200 mm thick in 1:4:8 (one
cement, four sand and eight hard broken
granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks for 23 cm
thickness as shown in detailed drawing,
relieving arches in brick work in C.M. 1:4
(one cement and four sand) shall be turned
over pipes wherever it passes through
walls, top R.C.C. slab in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) for 150mm thick and fixing 560 mm dia
circular ductile iron manhole cover and
frame(NECO/ACL/AREACO) of heavy duty and
weight not less than 80 kg in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) and fixing of C.I. Steps all
as shown in drawings,but excluding cost
of CI steps. Inside and outside plastering
for 20mm thick with C.M. 1:3 (one cement
and three sand) in making channels and
benching as shown in drawings in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) rendered with C.M. 1:3 (one
cement and three sand) for 20mm thick
including curing and testing the manhole
for its water tightness. A drop in water
more than 50mm in 24 hours shall not be
permitted. The rate includes the cost of
D.I manhole cover with frame, centering,
shuttering and reinforcement with TMT
(TISCON / VIZAG / IISCO / SAIL)bars
excluding the cost of earthwork excavation.
- 800mm x 800mm x 1000mm deep

Puducherry Region
32. Sewerage (Public Health)
Page No.: 668
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.45.1A Extra/rebate for every additional / no 693.79


reduction in depth of 0.10 m in 23 cm thick
wall or part thereof for manhole of size.
- 800mm x 800mm x 1000mm deep.

32.45.2 Construction of manhole with foundation no 25,207.89


concrete for 200 mm thick in 1:4:8 (one
cement, four sand and eight hard broken
granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks for 23 cm
thickness as shown in detailed drawing,
relieving arches in brick work in C.M. 1:4
(one cement and four sand) shall be turned
over pipes wherever it passes through
walls, top R.C.C. slab in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) for 150mm thick and fixing 560 mm dia
circular ductile iron manhole cover and
frame (NECO/ACL/AREACO) of heavy duty and
weight not less than 80 kg in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) and fixing of C.I. Steps all
as shown in drawings,but excluding cost of
CI steps. Inside and outside plastering for
20mm thick with C.M. 1:3 (one cement and
three sand) in making channels and benching
as shown in drawings in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) rendered with C.M. 1:3 (one cement
and three sand) for 20mm thick including
curing and testing the manhole for its
water tightness. A drop in water more than
50mm in 24 hours shall not be permitted.
The rate includes the cost of D.I manhole
cover with frame, centering, shuttering and
reinforcement with TMT (TISCON / VIZAG /
IISCO / SAIL)bars excluding the cost of
earthwork excavation. - 900mm x 1200mm x
1000mm deep

32.45.2A Extra/rebate for every additional / no 901.66


reduction in depth of 0.10 m in 23 cm thick
wall or part thereof for manhole of size -
900mm x 1200mm x 1000mm deep.

32.45.3 Construction of manhole with foundation no 33,850.11


concrete for 300 mm thick in 1:4:8 (one

Puducherry Region
32. Sewerage (Public Health)
Page No.: 669
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement, four sand and eight hard broken


granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks in the 23 cm up to
1.50 m from ground level and exceeding 1.50
m 34 cm thickness as shown in detailed
drawing, relieving arches in brick work in
C.M. 1:4 (one cement and four sand) shall
be turned over pipes wherever it passes
through walls, top R.C.C. slab in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) for 150mm thick and fixing
560 mm dia circular ductile iron manhole
cover and frame (NECO/ACL/AREACO) of heavy
duty and weight not less than 80 kg in
cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) and fixing of C.I.
Steps all as shown in drawings,but
excluding cost of CI steps. Inside and
outside plastering for 20mm thick with C.M.
1:3 (one cement and three sand) in making
channels and benching as shown in drawings
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) rendered with C.M.
1:3 (one cement and three sand) for 20mm
thick including curing and testing the
manhole for its water tightness. A drop in
water more than 50mm in 24 hours shall not
be permitted. The rate includes the cost
of D.I manhole cover with frame, centering,
shuttering and reinforcement with TMT
(TISCON / VIZAG / IISCO / SAIL)bars
excluding the cost of earthwork excavation.
- 900mm x 1200mm x 1600mm deep

32.45.3A Extra/rebate for every additional / no 1,266.53


reduction in depth of 0.10 m in 34 cm thick
wall or part thereof for manhole of size -
900mm x 1200mm x 1600mm deep.

32.45.4 Construction of manhole with foundation no 39,814.89


concrete for 300 mm thick in 1:4:8 (one
cement, four sand and eight hard broken
granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks in the 23 cm up to
1.50 m from ground level and exceeding 1.50

Puducherry Region
32. Sewerage (Public Health)
Page No.: 670
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

m 34 cm thickness as shown in detailed


drawing, relieving arches in brick work in
C.M. 1:4 (one cement and four sand) shall
be turned over pipes wherever it passes
through walls, top R.C.C. slab in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) for 150mm thick and fixing
560 mm dia circular ductile iron manhole
cover and frame (NECO/ACL/AREACO) of heavy
duty and weight not less than 80 kg in
cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) and fixing of C.I.
Steps all as shown in drawings,but
excluding cost of CI steps. Inside and
outside plastering for 20mm thick with C.M.
1:3 (one cement and three sand) in making
channels and benching as shown in drawings
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) rendered with C.M.
1:3 (one cement and three sand) for 20mm
thick including curing and testing the
manhole for its water tightness. A drop in
water more than 50mm in 24 hours shall not
be permitted. The rate includes the cost
of D.I manhole cover with frame, centering,
shuttering and reinforcement with TMT
(TISCON / VIZAG / IISCO / SAIL)bars
excluding the cost of earthwork excavation.
- 900mm x 1200mm x 2100mm deep

32.45.4A Extra/rebate for every additional / no 1,266.53


reduction in depth of 0.10 m in 34 cm thick
wall or part thereof for manhole of size -
900mm x 1200mm x 2100mm deep.

32.45.5 Construction of circular manhole of 1.40m no 58,100.86


internal diameter and to the depth detailed
below with R.C.C. kerb in 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) with
a overall size of 500 x 340 mm and shaped
at bottom as shown in drawing to receive
M.S. angle of size 100 x 100 x 10 mm as
cutting edge, with reinforcement not less
than 70 kg as indicated in drawing, and
with vertical rods of 12 mm diameter at 60
cm c/c, 120 cm long to bind the steining
wall and kerb, bottom plugging to a depth
of 0.50 m with plain cement concrete

Puducherry Region
32. Sewerage (Public Health)
Page No.: 671
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

1:1.5:3 (one cement ,one and half sand and


three HBG stone aggregate of 20 mm nominal
size) with walls as detailed below.
Providing relieving arch over the sewer
pipe wherever it passes through the walls
of the manholes, fixing of C.I.
Rungs,excluding cost of CI rungs, fixing of
D.I. manhole cover and frame
(NECO/ACL/AREACO) of heavy duty of size 560
mm diameter and weight not less than 80 kg
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) all shown in
drawing, the rate includes cost of manhole
cover with frame, centering, shuttering and
reinforcement with TMT(TISCON / VIZAG /
IISCO / SAIL) bars excluding the cost of
earth work excavation. Plastering both
inside and outside for 20 mm thick with CM
1:3 (one cement and three sand) and making
channels in cement concrete 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) all
as shown in drawing , rendered with cement
mortar 1:3 (one cement and three sand) for
20 mm thick etc., complete including curing
and testing the manhole for water
tightness. A drop in water level more than
50 mm in 24 hours will not be permitted -
For Manhole 2.5m deep with wall of 23cm
thick upto 1.5m and 34cm thick for depth
greater than 1.5m of brick masonry using
best available country bricks in cement
mortar 1:4 (1 cement & 4 sand).

32.45.5A Extra/rebate for every additional/reduction no 1,260.14


in depth of 0.10m or part thereof in 34cm
thick wall for the circular manhole of
1.40m internal dia. and 2.5m deep.

32.45.6 Construction of circular manhole of 1.40m no 1,06,392.48


internal diameter and to the depth detailed
below with R.C.C. kerb in 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) with
a overall size of 500 x 340 mm and shaped
at bottom as shown in drawing to receive
M.S. angle of size 100 x 100 x 10 mm as
cutting edge, with reinforcement not less
than 70 kg as indicated in drawing, and
with vertical rods of 12 mm diameter at 60
cm c/c, 120 cm long to bind the steining

Puducherry Region
32. Sewerage (Public Health)
Page No.: 672
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

wall and kerb, bottom plugging to a depth


of 0.50 m with plain cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) with walls as detailed below.
Providing relieving arch over the sewer
pipe wherever it passes through the walls
of the manholes, fixing of C.I.
Rungs,excluding cost of CI rungs, fixing of
D.I. manhole cover and frame
(NECO/ACL/AREACO) of heavy duty of size 560
mm diameter and weight not less than 80 kg
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) all shown in
drawing, the rate includes cost of manhole
cover with frame, centering, shuttering and
reinforcement with TMT(TISCON / VIZAG /
IISCO / SAIL) bars excluding the cost of
earth work excavation. Plastering both
inside and outside for 20 mm thick with CM
1:3 (one cement and three sand) and making
channels in cement concrete 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) all
as shown in drawing , rendered with cement
mortar 1:3 (one cement and three sand) for
20 mm thick etc., complete including curing
and testing the manhole for water
tightness. A drop in water level more than
50 mm in 24 hours will not be permitted -
For manhole 5m deep with wall 23 cm thick
upto 1.5m and 34 cm thick for depth from
1.5m and upto 2.8m and 45cm thick for depth
greater than 2.8m of brick masonry using
best available country bricks in cement
mortar 1:4 (1 cement and 4 sand).

32.45.6A Extra/rebate for every no 1,212.11


additional/reduction in depth of 0.10m or
part thereof in 34cm thick wall for the
circular manhole of 1.40m internal dia. and
5.0m deep.

32.45.7 Construction of flushing tank of internal no 65,658.36


size 2000 x 1200 x 1000 mm deep with R.C.C.
top slab of 150 mm thick in R.C.C 1:1.5:3
(one cement ,one and half sand and three
HBG stone aggregate of 20 mm nominal size)
with reinforcement as shown in detailed
drawing, foundation concrete of 200 mm
thick in 1:4:8 (one cement, four sand and

Puducherry Region
32. Sewerage (Public Health)
Page No.: 673
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

eight hard broken granite stone aggregate


of 40 mm nominal size) with 230 mm thick
wall in brick masonry using country bricks
in CM 1:4 (one cement and four sand) inside
and outside plastering with 20 mm thick CM
1:3 (one cement and three sand) making
flooring for 40 mm thick in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) and rendered with CM 1:3 (one cement
and three sand) 20 mm thick ,conveying and
fixing circular ductile iron manhole cover
and frame (NECO/ACL/AREACO) of heavy duty
of size of 560 mm diameter and weight not
less than 80 kg in cement concrete 1:1.5:3
(one cement ,one and half sand and three
HBG stone aggregate of 20 mm nominal size)
(all as shown in drawing ) providing and
fixing of C.I. pipes and specials for
flushing pipe of 200 mm diameter and
overflow pipe of 150 mm diameter conforming
to IS 1536 and IS 1538, jointing of socket
and spigot of C.I. pipes and specials shall
be in molten lead and encasing them in CC
1:4:8 (one cement, four sand, eight HBG
metal) block of size 1000 x 600 x 800
mm.The cost includes curing and testing
the flushing tank for its water tightness.
A drop in water more than 50mm in 24 hours
shall not be permitted. The rate includes
the cost of D.I manhole cover with frame,
centering, shuttering and reinforcement
with TMT(TISCON / VIZAG / IISCO / SAIL)
bars, but excluding the cost of earth work
excavation.

32.45.7A Extra/rebate for every additional/reduction no 2,489.07


in depth of 0.10m or part thereof in 23cm
thick wall for the flush tank of size
2000x1200x1000mm deep.

32.46.1 Construction of intercepting chamber of the no 19,404.36


size 600 x 850 x 1100 mm deep with R.C.C.
top slab of 100mm thick in R.C.C 1:1.5:3
(one cement ,one and half sand and three
HBG stone aggregate of 20 mm nominal size)
as shown in drawings, foundation in PCC
1:4:8 mix (one cement, four sand and eight
hard broken granite stone aggregate of 40
mm nominal size), side wall of 23 cm thick
in brick, inside and outside plastering
with 20 mm thick in CM 1:3 (one cement and

Puducherry Region
32. Sewerage (Public Health)
Page No.: 674
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

three sand) and making channel for house


service connection in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) rendered with CM 1:3 (one cement and
three sand) 20mm thick complete. Conveying
and fixing of rectangular ductile iron
manhole cover and frame (NECO/ACL/AREACO)
of medium duty size 450 x 600 mm and weight
not less than 70 kg in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size).The cost includes curing and testing
of the intercepting chamber for its water
tightness. A drop in water more than 50 mm
in 24 hours shall not be permitted. The
rate includes cost of rectangular D.I cover
with frame, centering, shuttering and
reinforcement with TMT(TISCON / VIZAG /
IISCO / SAIL) bars,but excluding the cost
of earth work excavation.

32.46.1A Extra/rebate for every additional/reduction no 674.66


in depth of 0.10m or part thereof in 23cm
thick wall for the intercepting chamber of
size 600x850x1100mm deep

32.47.1 Making C.I. vent shaft using 150 mm no 44,223.72


diameter C.I class LA conforming to IS 1536
with C.I cowl / wire guard balloon at top,
having an over all length of 5.50 m long
and fixing from bottom and overflow pipe
size of 150mm dia,extending to a depth of
1.25 m below ground level, with C.I. bend
of 150 mm dia medium class conforming to IS
1538 at bottom and resting over the CC
block of size 650 x 650 x 250 mm in
1:4:8 mix (one cement, four sand and eight
hard broken granite stone aggregate of 40
mm nominal size) encasing all round the
pipe with CC 1:4:8 mix (one cement, four
sand and eight hard broken granite stone
aggregate of 40 mm nominal size) to form a
block of 650 x 650 x 1000 mm and top is
finishing with cement concrete 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) for
250 mm thick including fixing of M.S.
foundation bolts and nuts of 20 mm
diameter and 600 mm long with split up end
and bottom to receive the C.I. pedestal of
175 mm internal diameter and 600 mm height

Puducherry Region
32. Sewerage (Public Health)
Page No.: 675
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and weight not less than 150kg to join


above and below ground level.The rate
includes the cost of C.I. specials and C.I.
Pedestal etc.,complete.

32.47.2 Fixing of 150 mm wide cast iron steps in no 533.44


the manholes with 200 x 200 x 100 mm CC
block in cement concrete 1:1.5:3 (one
cement ,one and half sand and three hard
broken granite stone aggregate of 20 mm
nominal size) all as shown in drawings.

32.48.1 Jointing the C.I./D.I. pipes with manhole no 1,272.47


including dismantling of brick work to the
required extent and making good the angular
space with brick work in CM 1:3 (one cement
and three sand) and encasing with cement
concrete 1:1.5:3 (one cement ,one and half
sand and three hard broken granite stone
aggregate of 20 mm nominal size) etc.
complete. - 450 mm dia pipe.

32.48.2 Jointing the C.I./D.I. pipes with manhole no 1,818.99


including dismantling of brick work to the
required extent and making good the angular
space with brick work in CM 1:3 (one cement
and three sand) and encasing with cement
concrete 1:1.5:3 (one cement ,one and half
sand and three hard broken granite stone
aggregate of 20 mm nominal size) etc.
complete. - 600 mm dia pipe.

32.49.1 Providing wooden (Padak) brackets of size no 1,549.92


80 cm X 100 cm, with vertical up right of
size 7.5 cm x7.5 cm, 100cm long and bolted
with horizontal wooden plank of size 80cm x
15cm with 4cm thickness with 4 nos of 10mm
dia MS bolts and nuts, 13cm long for
supporting of CI pipes for trunk sewer.

32.50.1A Raising of intercepting chamber by no 4,091.61


dismantling the old R.C.C. slab, removing
the I.C. cover and frame from the chamber
and raising the chamber height with brick
work in cement mortar 1:4 (one cement and
four sand), refixing the frame in position
by laying reinfoced cement concrete 1:1.5:3
(One cement one and half sand and three HBG
metal) including curing but excluding the
cost of reinforcement, finishing the top,
inside and outside plastering with 20mm
thick in cement mortar 1:3(one cement three

Puducherry Region
32. Sewerage (Public Health)
Page No.: 676
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sand), the rate includes all materials,


providing barricading,caution board, watch
and ward etc.,complete till the completion
of work with minimum hindrance to the
traffic.- 30cm height.

32.50.1B Raising of various types of manholes and no 1,984.01


flushing tank by cutting alround the
manhole cover, removing the frame and cover
from the manhole by cutting the B.T.,
W.B.M., surface, raising the manhole to
the required height with brick work in
cement motar 1:4 (One cement and four
sand), refixing the frame in position by
laying cement concrete 1:1.5:3 (One cement
one and half sand and three 20mm HBG metal)
including curing, but excluding the cost of
reinforcement, finishing the top, inside
and outside plastering with 20mm thick in
cement mortar 1:3(one cement three sand),
the rate includes all materials, providing
barricading,caution board, watch and ward
etc.,complete till the completion of work
with minimum hindrance to the traffic.-
30cm height.

32.51.1 Providing salt glazed stoneware pipe with metre 374.95


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 100 mm dia

32.51.1A Providing salt glazed stoneware pipe with metre 455.83


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 150 mm dia

Puducherry Region
32. Sewerage (Public Health)
Page No.: 677
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.51.1B Providing salt glazed stoneware pipe with metre 685.60


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 200 mm dia

32.51.1C Providing salt glazed stoneware pipe with metre 956.55


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 250 mm dia

32.51.1D Providing salt glazed stoneware pipe with metre 1,347.04


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 300 mm dia

32.51.1E Providing salt glazed stoneware pipe with metre 2,341.08


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 375 mm dia

Puducherry Region
32. Sewerage (Public Health)
Page No.: 678
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.52.1A Providing stoneware specials - `Y' junction no 543.86


with spigot and socket ends conforming to
I.S.651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked
with cement slurry or tarred gasket shall
be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
150 x 150 mm 'Y'

32.52.1B Providing stoneware specials - `Y' junction no 654.00


with spigot and socket ends conforming to
I.S. 651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked
with cement slurry or tarred gasket shall
be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
200 x 150 mm 'Y'

32.52.1C Providing stoneware specials - `Y' junction no 774.97


with spigot and socket ends conforming to
I.S. 651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked
with cement slurry or tarred gasket shall
be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
250 x 150 mm 'Y'

32.52.1D Providing stoneware specials - `Y' junction no 1,149.30


with spigot and socket ends conforming to
I.S. 651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked
with cement slurry or tarred gasket shall
be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
300 x 150 mm 'Y'

Puducherry Region
32. Sewerage (Public Health)
Page No.: 679
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

32.60.1 Cleaning the site by removing the slushy cum 92.00


soil on both the sides of road and making
the road fit for laying WBM and making
smooth surface for vehicular traffic
including disposing the same within 2 Km
lead.

32.60.2 Rectification of Road including earthwork Sqm 751.38


excavation not less than 35 cm in thick,
Providing & laying of sand gravel mix of 15
cm in thick, WBM Gr-I of 10 cm in thick,
WBM Gr-II of 7.5 cm in thick, tack coat at
10 kg/10 sq.m, premix carpet of 20 mm in
thick and seal coat of type -`B'. The rate
includes the cost of cleaning the WBM
surface and compaction using power roller
etc. complete.

32.61.1A Providing and laying Fibre reinforced sqm 5,400.00


plastic sheet 6mm thickness using glass
fibre mat and isopthalic resin laid in
alternate layers. The final surface of the
sheet will be finished with gel
coat,including moulding charges to
fabricate circular segments to fit the
collection well diameter,including cutting
and grinding the edges in order to fit with
the grill supporting arrangement including
making holes at required interval,fixing
the sheet with galvanized "J" hookes and
metal and bitumen washers.The hookes will
be painted with molten bitumen.

32.61.1B Providing and laying Fibre reinforced sqm 1,800.00


plastic lining to the steel section
including rubbing and claning the rusts and
dusts and applying resin and glass fibre
mat on the surface to a thickness of 2mm
and finished with a gel coat including all
labour and material costs.

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 680
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

33.9.2 Cutting holes upto 30 x 30 cm in walls each 216.81


including making good the same with bricks
of class designation 35.

33.10 Cutting holes upto 15x15 cm in R.C.C. each 182.35


floors and roofs for passing drain pipe
etc. and repairing the holes after
insertion of drain pipe etc. with cement
concrete 1:2:4 (1 cement:2 coarse sand:4
graded stone aggregate 20mm nominal size)
including finishing complete so as to make
it leak proof.

33.15 Making chases upto 7.5x7.5 cm in walls metre 91.52


including making good after housing G.I.
pipe etc.

33.20.1 Disinfecting C.I. water mains by flushing mts 7.46


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 80
mm diametre C.I. pipe.

33.20.2 Disinfecting C.I. water mains by fluhing mts 9.89


with water containing bleaching powder at
0.5gm per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
samples of water from the disinfected main
tested in the Public health laboratory:
100mm diametre C.I. pipe.

33.20.3 Disinfecting C.I. water mains by fluhing mts 12.47


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 125
mm diametre C.I. pipe.

33.20.4 Disinfecting C.I. water mains by fluhing mts 15.13


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 150
mm diametre C.I. pipe.

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 681
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

33.20.5 Disinfecting C.I. water mains by fluhing mts 20.52


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 200
mm diametre C.I. pipe.

33.20.6 Disinfecting C.I. water mains by fluhing mts 26.25


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 250
mm diametre C.I. pipe.

33.20.7 Disinfecting C.I. water mains by fluhing mts 29.86


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 300
mm diametre C.I. pipe.

33.20.8 Disinfecting C.I. water mains by fluhing mts 33.71


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 350
mm diametre C.I. pipe.

33.20.9 Disinfecting C.I. water mains by fluhing mts 37.88


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 400
mm diametre C.I. pipe.

33.20.10 Disinfecting C.I. water mains by fluhing mts 42.24


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 450

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 682
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

mm diametre C.I. pipe.

33.20.11 Disinfecting C.I. water mains by fluhing mts 46.91


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 500
mm diametre C.I. pipe.

33.20.12 Disinfecting C.I. water mains by fluhing mts 56.81


with water containing bleaching powder at
0.5gms per litre of water and cleaning the
same with fresh water, operation to be
repeated three times including getting the
sample of water from the disinfected main
tested in the Public health laboratory: 600
mm diametre C.I. pipe.

33.21.1 Extra for every operation of disinfecting mts 2.71


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the Public health
laboratory - 80 mm diameter C.I. pipe.

33.21.2 Extra for every operation of disinfecting mts 3.37


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water, including getting the samples
of water tested in the Public health
laboratory - 100 mm diameter C.I. pipe.

33.21.3 Extra for every operation of disinfecting mts 4.17


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 125 mm diameter C.I. pipe.

33.21.4 Extra for every operation of disinfecting mts 4.92


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 150 mm diameter C.I. pipe.

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 683
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

33.21.5 Extra for every operation of disinfecting mts 7.71


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 200 mm diameter C.I. pipe.

33.21.6 Extra for every operation of disinfecting mts 8.99


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 250 mm diameter C.I. pipe.

33.21.7 Extra for every operation of disinfecting mts 10.20


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 300 mm diameter C.I. pipe.

33.21.8 Extra for every operation of disinfecting mts 12.13


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 350 mm diameter C.I. pipe.

33.21.9 Extra for every operation of disinfecting mts 14.15


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 400 mm diameter C.I. pipe.

33.21.10 Extra for every operation of disinfecting mts 16.25


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 450 mm diameter C.I. pipe.

33.21.11 Extra for every operation of disinfecting mts 18.40


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 684
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

fresh water including getting the samples


of water tested in the Public health
laboratory - 500 mm diameter C.I. pipe.

33.21.12 Extra for every operation of disinfecting mts 22.95


the C.I. main by flushing with water
containing bleching powder at 0.5gms per
litre of water and cleaning the same with
fresh water including getting the samples
of water tested in the Public health
laboratory - 600 mm diameter C.I. pipe.

33.22.1 Dismantling old C.I. pipes including metre 185.43


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 80 mm diameter C.I.
pipe.

33.22.2 Dismantling old C.I. pipes including metre 191.51


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 100 mm diameter C.I.
pipe.

33.22.3 Dismantling old C.I. pipes including metre 197.02


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 125 mm diameter C.I.
pipe.

33.22.4 Dismantling old C.I. pipes including metre 202.81


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 150 mm diameter C.I.
pipe.

33.22.5 Dismantling old C.I. pipes including metre 223.99


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 200 mm diameter C.I.
pipe.

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 685
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

33.22.6 Dismantling old C.I. pipes including metre 244.40


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 250 mm diameter C.I.
pipe.

33.22.7 Dismantling old C.I. pipes including metre 262.77


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 300 mm diameter C.I.
pipe.

33.22.8 Dismantling old C.I. pipes including metre 279.98


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 350 mm diameter C.I.
pipe.

33.22.9 Dismantling old C.I. pipes including metre 295.34


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 400 mm diameter C.I.
pipe.

33.22.10 Dismantling old C.I. pipes including metre 311.20


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 450 mm diameter C.I.
pipe.

33.22.11 Dismantling old C.I. pipes including metre 324.70


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks including stacking of pipes at site,
lead upto 50 metres : 500 mm diameter C.I.
pipe.

33.22.12 Dismantling old C.I. pipes including metre 347.34


excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 686
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

blocks including stacking of pipes at site,


lead upto 50 metres : 600 mm diameter C.I.
pipe.

33.23.1 Labour for cutting C.I. pipe with steel each 60.80
saw:- 80mm diameter C.I. pipe.

33.23.2 Labour for cutting C.I. pipe with steel each 81.31
saw:- 100mm diameter C.I. pipe.

33.23.3 Labour for cutting C.I. pipe with steel each 112.34
saw:- 125mm diameter C.I. pipe.

33.23.4 Labour for cutting C.I. pipe with steel each 152.63
saw:- 150mm diameter C.I. pipe.

33.23.5 Labour for cutting C.I. pipe with steel each 203.53
saw:- 200mm diameter C.I. pipe.

33.23.6 Labour for cutting C.I. pipe with steel each 253.70
saw:- 250mm diameter C.I. pipe.

33.23.7 Labour for cutting C.I. pipe with steel each 304.61
saw:- 300mm diameter C.I. pipe.

33.23.8 Labour for cutting C.I. pipe with steel each 354.77
saw:- 350mm diameter C.I. pipe.

33.23.9 Labour for cutting C.I. pipe with steel each 405.57
saw:- 400mm diameter C.I. pipe.

33.23.10 Labour for cutting C.I. pipe with steel each 455.85
saw:- 450mm diameter C.I. pipe.

33.23.11 Labour for cutting C.I. pipe with steel each 506.66
saw:- 500mm diameter C.I. pipe.

33.23.12 Labour for cutting C.I. pipe with steel each 606.25
saw:- 600mm diameter C.I. pipe.

33.24 Supplying and stacking of hard stone (for cum 1,205.64


stone pitching) 22.5 cm thick at site.

33.25A Dry stone pitching 22.5 cm thick laid in sqm 275.84


courses and required profile with hammer
dressed stones having no side less than 15
cm, with minimum depth of 20 cm including
preparing the bedding surface etc. all
complete. ( Excluding cost of stone)

33.26.1 75 mm thick back filling for pitching sqm 47.46


including supplying of required materials

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 687
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and consolidation etc. complete with


moorum.

33.26.2 75 mm thick back filling for pitching sqm 103.29


including supplying of required materials
and consolidation etc. complete with stone
aggregate 20 mm nominal size.

33.26.3 75 mm thick back filling for pitching sqm 80.69


including supplying of required materials
and consolidation etc. complete with stone
aggregate 40 mm nominal size.

33.27.1.1 Drilling of borewell any where in metre 747.70


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig.
-Upto 60 mts depth ending below ground
level.

33.27.1.2 Drilling of borewell any where in metre 808.90


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig. -
From 60mts and upto 90 mts. depth ending
below ground level.

33.27.1.3 Drilling of borewell any where in metre 857.90


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 688
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

required for drilling at the site,


contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig. -
From 90mts and upto 120 mts. depth ending
below ground level.

33.27.1.4 Drilling of borewell any where in metre 903.20


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig.
-From 120mts and upto 150 mts. depth ending
below ground level.

33.27.1.5 Drilling of borewell any where in metre 917.70


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig.
-From 150mts and upto 180 mts. depth ending
below ground level.

33.27.1.6 Drilling of borewell any where in metre 947.00


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig.
-From 180mts and upto 210 mts. depth ending
below ground level.

33.27.1.7 Drilling of borewell any where in metre 974.85

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 689
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Pondicherry including tranportation in


alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig.
-From 210mts and upto 240 mts. depth ending
below ground level.

33.27.1.8 Drilling of borewell any where in metre 1,008.05


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig.
-From 240mts and upto 270 mts. depth ending
below ground level.

33.27.1.9 Drilling of borewell any where in metre 1,030.60


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig.
-From 270mts and upto 300 mts. depth ending
below ground level.

33.27.1.10 Drilling of borewell any where in metre 1,055.90


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 690
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

labour for drilling, bentonite mud, water


required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig. -
From 300mts and upto 330 mts. depth ending
below ground level.

33.27.1.11 Drilling of borewell any where in metre 1,077.20


Pondicherry including tranportation in
alluvial soil, sedimentary strata of
clay,sand stone, shale, pebbles, boulders
etc. by first taking a pilot bore of 140mm
/ 150mm / 200mm and then enlarging to
required dia by direct or reverse rotary
mud circulation method,including fuel,
labour for drilling, bentonite mud, water
required for drilling at the site,
contruction of mud pit (water available
within a lead of 1.5Km) using rotary rig. -
From 330mts and upto 360 mts. depth ending
below ground level.

33.27.2.1 Reaming from 140/150 mm dia pilot bore to metre 187.20


300mm dia bore. Upto 60 mts depth ending
below ground level.

33.27.2.2 Reaming from 140/150 mm dia pilot bore to metre 199.15


300mm dia bore. From 60 mts and upto 90 mts
depth ending from ground level

33.27.2.3 Reaming from 140/150 mm dia pilot bore to metre 212.50


300mm dia bore. From 90 mts and upto 120
mts depth ending from ground level

33.27.2.4 Reaming from 140/150 mm dia pilot bore to metre 215.15


300mm dia bore. From 120 mts and upto 150
mts depth ending from ground level

33.27.2.5 Reaming from 140/150mm dia pilot bore to metre 225.75


300mm dia bore.From 150 mts and upto 180
mts depth ending from ground level.

33.27.2.6 Reaming from 140/150mm dia pilot bore to metre 237.70


300mm dia bore.From 180 mts and upto 210
mts depth ending from ground level.

33.27.2.7 Reaming from 140/150mm dia pilot bore to metre 248.25


300mm dia bore.From 210 mts and upto 240
mts depth ending from ground level.

33.27.2.8 Reaming from 140/150mm dia pilot bore to metre 257.60


300mm dia bore.From 240 mts and upto 270

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 691
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

mts depth ending from ground level.

33.27.2.9 Reaming from 140/150mm dia pilot bore to metre 270.90


300mm dia bore.From 270 mts and upto 300
mts depth ending from ground level.

33.27.2.10 Reaming from 140/150mm dia pilot bore to metre 281.50


300mm dia bore.From 300 mts and upto 330
mts depth ending from ground level.

33.27.2.11 Reaming from 140/150mm dia pilot bore to metre 292.10


300mm dia bore.From 300 mts and upto360 mts
depth ending from ground level.

33.27.3.1 Reaming from 200 mm dia pilot bore to 350mm metre 211.10
dia bore. Upto 60 mts depth ending below
ground level

33.27.3.2 Reaming from 200mm dia pilot bore to 350mm metre 223.10
dia bore. From 60 mts and upto 90 mts depth
ending below ground level

33.27.3.3 Reaming from 200mm dia pilot bore to 350mm metre 237.70
dia bore. From 90 mts and upto 120 mts
depth ending below ground level

33.27.3.4 Reaming from 200mm dia pilot bore to 350mm metre 244.35
dia bore. From 120mts and upto 150 mts
depth ending below ground level

33.27.3.5 Reaming from 200mm dia pilot bore to 350mm metre 252.30
dia bore.From 150 mts and upto 180 mts
depth ending from ground level.

33.27.3.6 Reaming from 200mm dia pilot bore to 350mm metre 272.20
dia bore.From 180 mts and upto 210 mts
depth ending from ground level.

33.27.3.7 Reaming from 200mm dia pilot bore to 350mm metre 310.70
dia bore.From 210 mts and upto 240 mts
depth ending from ground level.

33.27.3.8 Reaming from 200mm dia pilot bore to 350mm metre 318.75
dia bore.From 240 mts and upto 270 mts
depth ending from ground level.

33.27.3.9 Reaming from 200mm dia pilot bore to 350mm metre 326.60
dia bore.From 270 mts and upto 300 mts
depth ending from ground level.

33.27.3.10 Reaming from 200mm dia pilot bore to 350mm metre 336.00
dia bore.From 300 mts and upto 330 mts

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 692
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

depth ending from ground level.

33.27.3.11 Reaming from 200mm dia pilot bore to 350mm metre 345.35
dia bore.From 330 mts and upto 360 mts
depth ending from ground level.

33.27.4.1 Reaming from 300 mm dia pilot bore to metre 289.45


400/450mm dia. Upto 60 mts depth ending
below ground level.

33.27.4.2 Reaming from 300mm dia pilot bore to metre 324.05


400/450mm dia bore. From 60 mts and upto 90
mts depth ending below ground level

33.27.4.3 Reaming from 300mm dia pilot bore to metre 345.35


400/450mm dia bore. From 90 mts and upto
120 mts depth ending below ground level

33.27.4.4 Reaming from 300mm dia pilot bore to metre 366.50


400/450mm dia bore. From 120 mts and upto
150 mts depth ending below ground level

33.27.4.5 Reaming from 300mm dia pilot bore to metre 381.10


400/450mm dia bore .From 150 mts and
upto180 mts depth ending below ground
level.

33.27.4.6 Reaming from 300mm dia pilot bore to metre 391.80


400/450mm dia bore.From 180 mts and upto210
mts depth ending below ground level.

33.27.4.7 Reaming from 300mm dia pilot bore to metre 401.10


400/450mm dia bore.From 210 mts and upto240
mts depth ending below ground level.

33.27.4.8 Reaming from 300mm dia pilot bore to metre 419.60


400/450mm dia bore.From 240 mts and upto270
mts depth ending below ground level.

33.27.4.9 Reaming from 300mm dia pilot bore to metre 435.60


400/450mm dia bore.From 270 mts and upto300
mts depth ending below ground level.

33.27.4.10 Reaming from 300mm dia pilot bore to metre 456.90


400/450mm dia bore.From 300 mts and upto330
mts depth ending below ground level.

33.27.4.11 Reaming from 300mm dia pilot bore to metre 472.65


400/450mm dia bore.From 330 mts and upto360
mts depth ending below ground level.

33.27.5 Charges for developing the borewells with 1 hour 1,101.10

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 693
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

air compressor of 600 CFM capacity (minimum


8 hours) including transportation labour
and fuel charges for compressor and
conducting yield test by"V" Notch methods.

33.27.7 Supplying of UPVC plain casing pipe for metre 1,790.37


borewells (FINOLEX / JAIN) conforming to
I.S. 12818 -1992 with relevent amendments
with class designation 'CM' and with
minimum wall thickness 10mm including
transportation and stocking at site -200mm
dia

33.27.8 Supplying of UPVC ribbed screen slotted metre 2,130.36


pipe for borewells (FINOLEX / JAIN)
conforming to IS 12818 -1992 with relevent
amendments with class designation 'RS' and
with minimum wall thickness 10mm including
transportation and stocking at site - 200mm
dia

33.27.9 Supplying of MS centering guide of size 25 no 180.85


mm x 3 mm thickness suitable for 200 mm
UPVC pipe.

33.27.10 Lowering of UPVC plain casing pipe/ribbed no 73.54


screen slotted pipes into the borewell
including cost of cleaning material,fixing
of M.S centering guide size of 25mm x 3mm
thick suitable for 200mm dia UPVC
pipe,including cost of labour for
positioning of assembly for lowering
purpose using rig.

33.27.11 Supplying transportation and packing of 8mm cum 2,965.39


size down gauge graded pebbles including
filling the annular space gradually
complete.The pebbles disintegrated pieces.
should be free from any disintegrated
pieces.

33.27.12 Supplying,transporting and packing of clay cum 1,900.00


balls including filling the annular space
gradually complete.The clay balls should be
free from any sand particles.

33.27.13 Providing and fixing M.S. top cover no 409.92


suitable for UPVC pipes including the cost
of materials and labour etc.

33.27.14 Drilling 200mm dia borehole in hard rock metre 595.55


formation by DTH method (Down the hole

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 694
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

hammer) inside the already inserted 200mm


UPVC casing pipe.The entire column is to be
cleaned at site.The rate includes hire
charges for the power rig for drilling the
bores,the cost of fuel charges,transporting
to and fro the power rig flushing the bore
using compressor providing danger lights
during night time etc.,complete.

33.27.15 Supplying and fixing electronic type no 10,750.00


battery charger unit for energizing the
genset incuding charging indicator
lamp,AC&DC fuses,AC supply ON&OFF
control,DC output MCB,
automaticfloat/booster charger rating
12V-15Amps capacity etc.,complete.

33.27.16 Providing and fixing of UPVC End Cap No. 1,073.02


embedded in M.S. Cone suitable for UPVC
casing pipe including the cost of materials
and labour for jointing.

Puducherry Region
34. OHT (Works)
Page No.: 695
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

34.1.1 Providing two legged scaffolding using 15 Rmt 372.59


cm diameter blue-gum posts or casurina
posts or best quality bamboo posts of 4m
over all length (3.0m heigh + 0.5m
projection + 0.5 into the ground ) the
distance between the two rows being 1.25m
and the spacing of posts with 0.5m overlap
on either side and braces to step up and
providing a platform with country wood
planks of 40mm thick and 1m width etc in a
complete form using coir and nails 1m run
(Rate of scaffolding for a height of 3m and
length of 1m)

34.1.2 Extra for providing two legged scaffolding Rmt 333.09


for every additional height of 2.5m (Rate
for scaffolding for a height of 3m and
length of 1m)

34.1A Providing two legged scaffolding using 15cm operation 1,432.30


diameter blue -gum posts or casurina posts
or best quality bamboo posts of 4m over all
length (3.0m heigth+0.5m projection +0.5m
in to the ground ) the distance between
the two rows being 1.25m and the spacing
of posts with 0.5m over lap on either side
and braces at 2m c/c including
longitudinal and transverse middle braces
to step up and providing a platform with
country wood planks of 40mm thick and 1m
width etc in a complete form using coir and
nails 1m run.

34.2.1 Centring and shuttering including struting, sqm 821.07


propping for 3m height and removal of form
for floor slabs, roof slabs, Landings,
balconies and access platforms.

34.2.2 Centering and shuttering including, sqm 821.08


strutting, propping etc, and removal of
form for foundations, footing, bases of
columns etc

34.2.3 Centering and shuttering including sqm 852.72


strutting , propping etc and removal of
form for walls (any thickness) including
attached pillastering , buttresses ,plinth
and string courses etc.

34.2.4 Centering and shuttering including sqm 821.08


strutting , propping etc and removal of
form for lintels,beams, girders ,bracers

Puducherry Region
34. OHT (Works)
Page No.: 696
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

brussummers and cantilevers etc.

34.2.5 Centering aqnd shuttering including sqm 884.38


strutting, propping etc and removal of form
for columns, pillers, piers,abutment, posts
and struts

34.2.6 Centering and shuttering including sqm 852.72


strutting , propping etc and removal of
form for vertical and horizontal firms
individually or forming box louers bund ,
fascias and lares boards.

34.2A Extra for providing two legged scaffolding Operations 1,195.27


for every additional height of 2.5m.

34.3A Centring for soffits of RCC slabs or plane Operations 3,594.00


surfaces including strutting 3m height.

Puducherry Region
35. Subsoil Exploration
Page No.: 697
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

35.1.1 Drilling 150mm diameter bore holes in all no 9,283.41


types of soils except boulders, weathered /
hard rocks , conducting the following field
and laboratory tests and furnishing the
detailed report consisting of site plan
showing the locations of the bore holes
with R.L of the locations with a reference
bench mark, bore logs, field & laboratory
test results , recommendations for the
depths & types of foundations and
allowable safe bearing capacities / pile
carrying capacities etc.in triplicate all
as per the procedures given in the relevant
I.S.codes (the rate includes mobilisation
and demobilisation charges)
A) Field work: (i) Conducting standard
penetration test at regular intervals of 1m
upto 4m depth & of 1.5m interval in further
depths and change of layers . (ii)
Collecting disturbed soil samples in case
of cohesionless soil layers and undisturbed
soil samples in case of cohesive soil
layers (the representative samples shall be
at every 0.5m interval including the soil
recovered from split spoon sampler). (iii)
Observing and recording ground water table.
(iv) Collecting water sample for conducting
chemical analysis if the ground water is
present at or above the depth of
foundations.
B) Laboratory tests: (i) Grain size
analysis, (ii) Atterberg's Limits, (iii)
Free swell test, (iv) Unit weight, (v)
Water content, (vi) Shear test / UCC test,
(vii) Consolidation test - upto 10m depth
from the ground level or 3m into the very
dense / very hard soil strata with N value
more than 50, whichever is met earlier (If
the observed N values are more than 50, the
same shall be ascertained in further depths
of minimum 3m at 1m intervals and if the
observed N values are 50 or less, the test
shall be continued again upto 10m depth or
in to the very dense / very hard strata for
3 more metres).

35.1.2 Drilling 150mm diameter bore holes in all meter 1,127.27


types of soils except boulders, weathered /
hard rocks , conducting the following field
and laboratory tests and furnishing the
detailed report consisting of site plan
showing the locations of the bore holes

Puducherry Region
35. Subsoil Exploration
Page No.: 698
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with R.L of the locations with a reference


bench mark, bore logs, filed & laboratory
test results , recommendations for the
depths & types of foundations and
allowable safe bearing capacities / pile
carrying capacities etc.in triplicate all
as per the procedures given in the relevant
I.S.codes (the rate includes mobilisation
and demobilisation charges)
A) Field work: (i) Conducting standard
penetration test at regular intervals of
1.5m and change of layers . (ii)
Collecting disturbed soil samples in case
of cohesionless soil layers and undisturbed
soil samples in case of cohesive soil
layers (the representative samples shall be
at every 0.5m interval including the soil
recovered from split spoon sampler. (iii)
Observing and recording ground water table.
(iv) Collecting water sample for conducting
chemical analysis if the ground water is
present at or above the depth of
foundations.
B) Laboratory tests: (i) Grain size
analysis, (ii) Atterberg's Limits, (iii)
Free swell test, (iv) Unit weight, (v)
Water content, (vi) Shear test / UCC test,
(vii) Consolidation test - 10m to 20m
depth from the ground level or 5m into the
very dense / very hard soil strata with N
value more than 50, whichever is met
earlier (If the observed N values are more
than 50, the same shall be ascertained in
further depths of minimum 5m at 1m
intervals)

35.1.3 Drilling 150mm diameter bore holes in all meter 1,326.20


types of soils except boulders, weathered /
hard rocks , conducting the following field
and laboratory tests and furnishing the
detailed report consisting of site plan
showing the locations of the bore holes
with R.L of the locations with a reference
bench mark, bore logs, fieled & laboratory
test results , recommendations for the
depths & types of foundations and
allowable safe bearing capacities / pile
carrying capacities etc.in triplicate all
as per the procedures given in the relevant
I.S.codes (the rate includes mobilisation
and demobilisation charges)
A) Field work: (i) Conducting standard

Puducherry Region
35. Subsoil Exploration
Page No.: 699
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

penetration test at regular intervals of 1m


upto 4m depth & of 1.5m interval in further
depths and change of layers . (ii)
Collecting disturbed soil samples in case
of cohesionless soil layers and undisturbed
soil samples in case of cohesive soil
layers (the representative samples shall be
at every 0.5m interval including the soil
recovered from split spoon sampler. (iii)
Observing and recording ground water table.
(iv) Collecting water sample for conducting
chemical analysis if the ground water is
present at or above the depth of
foundations.
B) Laboratory tests: (i) Grain size
analysis, (ii) Atterberg's Limits, (iii)
Free swell test, (iv) Unit weight, (v)
Water content, (vi) Shear test / UCC test,
(vii) Consolidation test - 20m to 30m
depth from the ground level or 5m into the
very dense / very hard soil strata with N
value more than 50, whichever is met
earlier (If the observed N values are more
than 50, the same shall be ascertained in
further depths of minimum 5m at 1m
intervals)

35.1.4 Drilling 150mm diameter bore holes in all meter 1,591.44


types of soils except boulders, weathered /
hard rocks , conducting the following field
and laboratory tests and furnishing the
detailed report consisting of site plan
showing the locations of the bore holes
with R.L of the locations with a reference
bench mark, bore logs, fieled & laboratory
test results , recommendations for the
depths & types of foundations and
allowable safe bearing capacities / pile
carrying capacities etc.in triplicate all
as per the procedures given in the relevant
I.S.codes (the rate includes mobilisation
and demobilisation charges)
A) Field work: (i) Conducting standard
penetration test at regular intervals of 1m
upto 4m depth & of 1.5m interval in further
depths and change of layers . (ii)
Collecting disturbed soil samples in case
of cohesionless soil layers and undisturbed
soil samples in case of cohesive soil
layers (the representative samples shall be
at every 0.5m interval including the soil
recovered from split spoon sampler. (iii)

Puducherry Region
35. Subsoil Exploration
Page No.: 700
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Observing and recording ground water table.


(iv) Collecting water sample for conducting
chemical analysis if the ground water is
present at or above the depth of
foundations.
B) Laboratory tests: (i) Grain size
analysis, (ii) Atterberg's Limits, (iii)
Free swell test, (iv) Unit weight, (v)
Water content, (vi) Shear test / UCC test,
(vii) Consolidation test - 30m to 40m
depth from the ground level or 5m into the
very dense / very hard soil strata with N
value more than 50, whichever is met
earlier (If the observed N values are more
than 50, the same shall be ascertained in
further depths of minimum 5m at 1m
intervals)

35.1.5 Conducting Chemical Analysis of ground No. 2,652.40


water to check whether the ground water
will affect the foundation concrete.

35.1.6 Conducting Chemical Analysis of sub soil to No 2,652.40


check whether the soil will affect the
foundation concrete.

35.1.7 Making trial pits of required size upto no 6,631.00


maximum of 1.5m depth, collecting disturbed
and / or undisturbed soil samples at the
depth decided by the engineer - in- charge,
conducting necessary laboratory tests and
furnishing test results viz., soaked CBR
value, Optimum moisture content, grain size
analysis, Atterberg's limits , free swell
index, field moisture content, field
density and maximium dry density etc. for
formation and improvement of roads

35.1.8 Collecting disturbed and / or undisturbed no 5,304.80


soil samples from the same trial pit in
35.1.7, at other depths decided by the
engineer -in-charge, conducting necessary
laboratory tests and furnishing test
results viz., Soaked CBR value, Optimum
moisture content, Grain size analysis ,
Atterberg's limits, free swell index, field
moisture content, field density and maximum
dry density etc.for new formation or
improvement of roads

Puducherry Region
ROAD WORK
(MOST)
4. Granular Sub-base
Page No.: 701
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

4.2D.MO Providing and laying sand gravel mix 1:1 of cum 1,214.95
150mm consolidated thickness using 0.68cum
of sand & 0.62cum of gravel for 1cum
finished to a soaked CBR value of minimum
20 including cost and conveyance of sand
and gravel to the work site and stacking to
the standard departmental gauge for
premeaurement, mixing the required
quantities of sand and gravel, spreading
watering and consolidation the mix by power
roller rolling to achive the required
proctor density including the labour
charges for mixing, spreading, hire and
fuel charges for power roller and all other
tools and plants employed etc., complete.
As per clause no 401 of MOT specification.

Puducherry Region
6. Bituminous Construction
Page No.: 702
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

6.1.MO Cleaning the existing W.B.M. road surface sqm 12.14


including removing of binding material and
other foreign matter with wire brushes and
small picks, sweeping with brooms or soft
brushes and finally dusting with old gunny
bags and/or compressed air to receive
bituminous treatment. As per clause no
502.4.2 and 503.3.1 of MOST specification.

6.2.MO Cleaning of the existing black topped sqm 3.03


surfaces with brooms, soft brushes and
finally dusting with old gunny bags and/or
compressed air to receive bituminous
treatment. As per clause no 503.3.1 of MOST
specification.

6.3.MO Scarifying existing stone metal layer up to cum 1,337.34


75mm thick along with their bituminous
surface, picking up scarified material and
stacking of old serviceable material within
a lead of 100m sequential spreading the
salvage aggregates with fresh aggregates on
prepared base and consolidating as per
water bound macadam specification. As per
clause no 404 of MOST specification.

6.5E.1.MO Providing and applying tackcoat on the sqm 24.39


prepared surface, heating bitumen in boiler
and spraying the bitumen with sprayset
fitted on bitumen boiler - on black topped
surface bitumen @ 5kg/10sqm.

6.5F.1.MO Providing and applying tack coat on the sqm 48.18


prepared surface, heating bitumen in boiler
and spraying the bitumen with sprayset
fitted on bitumen boiler - on granular base
such as WBM and WMM surfaces not bitumen
primed. Rate of application 10kg/10sqm.

6.5G.1.MO Providing and applying tack coat on the sqm 12.84


prepared surface, spraying the bitumen
emulsion with spray set at 2.50kg/10sqm.As
per clause 503 of Most specification.

6.5H.1.MO Providing and applying tack coat on the sqm 20.99


prepared surface, spraying the bitumen
emulsion with spray set at 4.00kg/10sqm.As
per clause 503 of Most specification.

6.11A.MO Providing and laying open graded premix sqm 110.49


carpet with specified graded crushed
aggregates for wearing course including

Puducherry Region
6. Bituminous Construction
Page No.: 703
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

loading of aggregates with f.e. loader,


heating binder and aggregates in hot mix
plant 30 to 40 tonne, transporting the
mixed material with tipper and laying with
paver finisher to the required level and
grade, rolling with power roller 8 to 10
tonne but excluding cost of tack and seal
coat with lead for mix of material 1 km. As
per clause no 509 of MOST specification.

6.11B.MO Providing and laying open graded premix sqm 116.96


carpet 20mm thick on prepared surface in a
single course as wearing course composed of
specified size of stone aggregates premix
with a bituminous binder in mini hot mix
plant 6 to 10 tonne laying manually and
rolling with power roller 8 to 10 tonne but
excluding cost of primer/tack coat. As per
clause no 509 of MOST specification.

6.11C.MO Providing and laying open graded premix sqm 145.96


carpet of 25mm thick on prepared surface in
a single course as wearing course composed
of specified size of stone aggregates
premix with a bituminous binder in mini hot
mix plant 6-10 tonne laying manually and
rolling with power roller 8-10 tonne but
excluding cost of primer/tack coat. As per
clause no 509 of MOST specification.

6.16.MO Providing and applying liquid seal coat, sqm 59.50


type `A' comprising of a layer of
bituminous binder, followed by a cover of
stone chipping of specified grading and
rolling with power roller 8 to 10 tonne.
As per clause no 513 of MOST specification.

6.17.MO Providing and applying premixed seal coat sqm 45.35


type `B' comprising of thin application of
fine aggregate premix with bitumen binder
in mini hot mix plant, carriage manually of
mixed material and laying and rolling with
power roller 8 to 10 tonne. As per clause
no 513 of MOST specification.

Puducherry Region
7. Culverts
Page No.: 704
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

7.1A.MO Cement concrete 1:4:8 mix with stone cum 2,980.77


aggregate 40mm nominal size in foundation
upto a depth of 1.5 metres below ground
level and upto height of 1.5 above
ground/bed level.

7.1B.MO Cement concrete 1:3:6 mix with stone cum 3,486.88


aggregates 20mm nominal size mechanically
mixed and vibrated in foundation upto a
depth of 1.5 metres below ground level and
1.5 metres ground/bed level.

7.2.MO Plain cement concrete m-15 mix with stone cum 4,099.43
aggregates 20mm nominal size mechanically
mixed and vibrated in foundation upto a
depth of 1.50 metres below ground level
and/or 1.50 metres above ground/bed level.

7.3.MO Plain cement concrete m-15 mix with stone cum 4,202.00
aggregates 20mm nominal size mechanically
mixed and vibrated in superstructure upto
4.00 metre above, 1.50 metre from
ground/bed level.

7.4.MO Reinforced cement concrete m-20 mix with cum 6,097.28


stone aggregate 20mm nominal size
mechanically mixed and vibrated for
reinforced concrete work in slab excluding
steel reinforcement, but including
centering and shuttering, laid in position.

7.5.MO Reinforced cement concrete m-20 mix with cum 5,688.51


stone aggregate 20mm nominal size
mechanically mixed and vibrated for bed
plates exlcuding steel reinforcement, but
including centering and shuttering, laid in
position.

7.6C.MO Steel reinforcement for R.C.C. works Tonne 53,015.95


including bending, binding and placing in
position - Thermo Mechanical Treated Bars
(TISCON / VIZAG / IISCO / SAIL/JSW)
including placing the M30 grade Athees make
cover block @ 60cm centre to center

7.6D.MO Steel reinforcement for R.C.C. works Tonne 46,435.68


including bending, binding and placing in
position - Thermo Mechanical Treated Bars
(ISI brand approved make) including placing
the M30 grade Athees make cover block @

Puducherry Region
7. Culverts
Page No.: 705
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

60cm centre to center

7.7.MO First class brick in cement mortar 1:3 upto cum 3,658.93
a depth of 1.50 metres below ground and
above 1.50 from bed/ground level.

7.8.MO Extra for brick work in superstructure upto cum 171.45


a height of 4 metres or part thereof above
1.5 metre from bed/ground level.

7.9.MO Brick or edge flooring with 1st class sqm 399.16


bricks including cement slurry in cement
sand mortar 1:4.

7.10.MO Coursed rubble stone masonry in cement sand cum 4,302.74


mortar 1:3 in foundation upto a depth of
1.50 metres and also 1.50 metres above
ground/bed level.

7.11.MO Extra for coursed rubble stone masonry in cum 245.22


superstructure upto a height of 4 metres or
part thereof above 1.50 metres from
ground/bed level.

7.12.MO Randum rubble masonry (coursed) in cement cum 3,820.31


sand mortar 1:3 in foundation upto a depth
of 1.50 metres and 1.50 above ground/bed
level.

7.13.MO Extra for random rubble masonry (coursed) cum 245.22


in cement sand mortar 1:3 in superstructure
upto a height of 4 metres or part thereof,
1.50 from ground or bed level.

7.14.MO Cement pointing 1:2 deep variety (cut or sqm 100.36


weather) on brick and tile work.

7.15.MO Cement pointing 1:2 flush on brick on edge sqm 94.87


floor.

7.16.MO Cement plaster 12mm thick in cement mortar sqm 130.60


1:3

7.17.MO Laying reinforced cement concrete pipes metre 4,522.90


NP-3 for culverts including pointing ends
and fixing collar with cement mortar 1:2 -
900mm dia.

7.18.MO Laying reinforced cement concrete pipes metre 5,960.96


NP-3 for culverts including pointing ends
and fixing collar with cement mortar 1:2 -
1200mm dia.

Puducherry Region
7. Culverts
Page No.: 706
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

7.19.MO Rubble stone laid in cement sand mortar 1:3 cum 2,946.81
in flooring.

7.20.MO Dry boulder pitching in flooring. cum 1,368.88

7.21A.MO Providing and filling in foundation cum 551.95


trenches and at the back of abutments, wing
walls etc. and below pipe bed in layers not
exceeding 150mm thick including watering
and compacting including all lead and
lifts. - Good local sand free from earth.

7.21B.MO Providing and filling in foundation cum 816.49


trenches and at the back of abutments, wing
walls etc. and below pipe bed in layers not
exceeding 150mm thick including watering
and compacting including all lead and
lifts. - Selected granular material in
filling.

7.21C.MO Providing and filling in foundation cum 1,192.51


trenches and at the back of abutments, wing
walls etc. and below pipe bed in layers not
exceeding 150mm thick including watering
and compacting including all lead and
lifts. - Filter media behind abutment wing
and return wall.

7.22.MO Making and filling expansion joints with metre/c 1.52


bitumen filler (bitumen 40 percent,
asbestos 5 percent and sand 55%) 12mm wide.

7.23A.MO Providing and fixing premoulded bitumen metre/c 4.59


joint filler, for expansion joints
including the cost of sealing compound and
priming coat - 12 mm wide

7.23B.MO Providing and fixing prmoulded bitumen metre/c 7.72


joint filler, for expansion joints
including the cost of sealing compound and
priming coat - 25 mm wide.

7.24.MO Reinforced cement concrete M30 mix with cum 6,323.84


minimum cement content 450 kg /cum using
stone aggregate 20 mm nominal size
mechanically mixed and vibrated for
reinforced concrete work in slab excluding
steel reinforcement, but including
centering and shuttering, laid in position.

7.28.MO Boring, providing and installing bored cast metre 5,809.19

Puducherry Region
7. Culverts
Page No.: 707
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

-in-situ reinforced cement concrete pile of


specified diameter using approved drilling
method to the required depth up to the cut
off level in pile cap in RCC M20 grade with
a minimum cement content of 400 kg / cum
using Blue metal of 20mm and down gauge to
carry a safe working load not less than the
specified, excluding the cost of steel
reinforcement but including the cost of
boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debris and the
waste bore mug from the site . The rate
shall include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) -1000 mm dia pile.

7.29.MO Boring, providing and installing bored cast metre 3,267.67


-in-situ reinforced cement concrete pile of
specified diameter using approved drilling
method to the required depth up to the cut
off level in pile cap in RCC M20 grade with
a minimum cement content of 400 kg / cum
using Blue metal of 20mm and down gauge to
carry a safe working load not less than the
specified, excluding the cost of steel
reinforcement but including the cost of
boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debris and the
waste bore mug from the site . The rate
shall include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) -750 mm dia pile.

7.30.MO Bored/cast-in-situ R.C.C.piles for load mt 626.69


test assume: Initial & routine test per
tonne.

7.31.MO Bored/cast-in-situ R.C.C.piles for load mt 626.69


testing assume: lateral load testing

Puducherry Region
7. Culverts
Page No.: 708
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

7.34.MO Boring, providing and installing bored cast metre 5,830.54


-in-situ reinforced cement concrete pile of
specified diameter using approved drilling
method to the required depth up to the cut
off level in pile cap in RCC M20 grade with
a minimum cement content of 400 kg / cum
using Blue metal of 20mm and down gauge to
carry a safe working load not less than the
specified, excluding the cost of steel
reinforcement but including the cost of
boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debris and the
waste bore mug from the site . The rate
shall include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) -1000 mm dia
pile.(Using cement SRPC)

7.35.MO Boring, providing and installing bored cast metre 3,279.68


-in-situ reinforced cement concrete pile of
specified diameter using approved drilling
method to the required depth up to the cut
off level in pile cap in RCC M20 grade with
a minimum cement content of 400 kg / cum
using Blue metal of 20mm and down gauge to
carry a safe working load not less than the
specified, excluding the cost of steel
reinforcement but including the cost of
boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debris and the
waste bore mug from the site The rate
shall include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) -750 mm dia
pile.(Using cement SRPC)

Puducherry Region
ROAD WORK
(MORTH)
2. Site Clearance and Dismantling
Page No.: 709
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

2.3.1A Clearing and grubbing road land including hectare 45,081.58


uprooting rank vegetation, grass, bushes,
shrubs, saplings and trees girth upto
300mm, removal of stumps of trees cut
earlier and disposal of unserviceable
materials and stacking of serviceable
material to be used or auctioned, upto a
lead of 1000m including removal and
disposal of top organic soil not exceeding
150mm in thickness - by manual means in
area of light jungle.

2.3.2B Clearing and grubbing road land including hectare 60,332.59


uprooting rank vegetation, grass, bushes,
shrubs, saplings and trees girth upto
300mm, removal of stumps of trees cut
earlier and disposal of unserviceable
materials and stacking of serviceable
material to be used or auctioned, upto a
lead of 1000m including removal and
disposal of top organic soil not exceeding
150mm in thickness - by manual means in
area of thorny jungle.

2.3.2C Clearing and grubbing road land including hectare 27,491.93


uprooting rank vegetation, grass, bushes,
shrubs, saplings and trees girth upto
300mm, removal of stumps of trees cut
earlier and disposal of unserviceable
materials and stacking of serviceable
material to be used or auctioned, upto a
lead of 1000m including removal and
disposal of top organic soil not exceeding
150mm in thickness - by mechanical means in
area of light jungle.

2.3.2D Clearing and grubbing road land including hectare 33,449.00


uprooting rank vegetation, grass, bushes,
shrubs, saplings and trees girth upto
300mm, removal of stumps of trees cut
earlier and disposal of unserviceable
materials and stacking of serviceable
material to be used or auctioned, upto a
lead of 1000m including removal and
disposal of top organic soil not exceeding
150mm in thickness - by mechanical means in
area of thorny jungle.

2.4.1A Dismantling of existing structures like cum 311.17


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 710
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

including T&P and scaffolding wherever


necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Lime/Cement
Concrete - by manual means (Lime concrete,
cement concrete grade M-10 and below.

2.4.1B Dismantling of existing structures like cum 370.83


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Lime/Cement
Concrete - by manual means (Cement concrete
grade M-15 and M-20).

2.4.1C Dismantling of existing structures like cum 975.06


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Lime/Cement
Concrete - by manual means (Prestressed /
reinforced cement concrete grade M-20 &
above)

2.4.1E Dismantling of existing structures like cum 347.80


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Lime/Cement
Concrete - by mechanical means (Cement
concrete grade M-15 & M-20).

2.4.1F Dismantling of existing structures like cum 2,399.04


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 711
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

stacking the serviceable material with all


lifts and lead of 1000m - Lime/Cement
Concrete - by mechanical means (Prestressed
/ RCC grade M-20 and above)

2.4.2A Dismantling of existing structures like cum 191.84


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling brick
/ tile work in lime mortor

2.4.2B Dismantling of existing structures like cum 251.51


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling brick
/ tile work in cement mortar

2.4.2C Dismantling of existing structures like cum 167.98


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling brick
/ tile work in mud mortar

2.4.2D Dismantling of existing structures like cum 156.05


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling brick
/ tile work - dry brick pitching or brick
soling.

2.4.3A Dismantling of existing structures like cum 215.70


culverts, bridges, retaining walls and

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 712
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

other structure comprising of masonry,


cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling stone
masonry - rubble stone masonry in lime
mortar.

2.4.3B Dismantling of existing structures like cum 251.51


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling stone
masonry - rubble stone masonry in cement
mortar

2.4.3C Dismantling of existing structures like cum 191.84


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling stone
masonry - rubble stone masonry in mud
mortar

2.4.3D Dismantling of existing structures like cum 179.91


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling stone
masonry - dry rubble masonry.

2.4.3E Dismantling of existing structures like cum 167.98


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 713
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

stacking the serviceable material with all


lifts and lead of 1000m - dismantling stone
masonry - dismantling stone pitching / dry
stone spalls

2.4.3F Dismantling of existing structures like cum 191.84


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - dismantling stone
masonry - dismantling boulders laid in wire
crates including opening of crates and
stacking dismantled materials.

2.4.4A Dismantling of existing structures like cum 477.04


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - wood work wrought
framed and fixed in frames of trusses upto
a height of 5m. above plinth level.

2.4.5A Dismantling of existing structures like tonne 1,166.25


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Steel work in all
types of sections upto a height of 5m above
plinth level excluding cutting of rivet
including dismembering

2.4.5B Dismantling of existing structures like tonne 877.32


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Steel work in all

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 714
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

types of sections upto a height of 5m above


plinth level excluding cutting of rivet
excluding dismembering

2.4.5C Dismantling of existing structures like each 8.24


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Steel work in all
types of sections upto a height of 5m above
plinth level excluding cutting of rivet -
Extra for cutting rivet

2.4.6A Dismantling of existing structures like nos 1.04


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Scraping of
bricks dismantled from brick work including
stacking in lime/cement mortar

2.4.7A Dismantling of existing structures like cum 418.81


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Scraping of stone
from dismantled stone masonry - in cement /
lime mortar

2.4.7B Dismantling of existing structures like cum 88.90


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Scraping of stone
from dismantled stone masonry in mud mortar

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 715
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

2.4.8A Dismantling of existing structures like sqm 13.01


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Scraping plaster
in lime or cement mortar from brick / stone
masonry

2.4.9A Dismantling of existing structures like metre 154.88


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Removing all
types of Hume pipes and Stacking within a
lead of 1000 metres including earthwork and
dismantling of Masonry works - upto 600mm
dia

2.4.9B Dismantling of existing structures like metre 209.41


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Removing all
types of Hume pipes and Stacking within a
lead of 1000 metres including earthwork and
dismantling of Masonry works - Above 600mm
to 900mm dia

2.4.9C Dismantling of existing structures like metre 358.57


culverts, bridges, retaining walls and
other structure comprising of masonry,
cement concrete, wood work, steel work,
including T&P and scaffolding wherever
necessary, sorting the dismantled material
disposal of unserviceable material and
stacking the serviceable material with all
lifts and lead of 1000m - Removing all
types of Hume pipes and Stacking within a
lead of 1000 metres including earthwork and
dismantling of Masonry works - Above 900mm

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 716
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

dia

2.5.1A Dismantling of flexible pavements and cum 575.04


disposal of dismantled materials upto a
lead of 1000 metres, stacking serviceable
and unserviceable materials separately - by
manual means - bituminous courses

2.5.1B Dismantling of flexible pavements and cum 409.10


disposal of dismantled materials upto a
lead of 1000 metres, stacking serviceable
and unserviceable materials separately - by
manual means - Granular courses

2.5.2A Dismantling of flexible pavements and cum 222.68


disposal of dismantled materials upto a
lead of 1000 metres, stacking serviceable
and unserviceable materials separately - by
mechanical means - bituminous courses

2.6 Dismantling of cement concrete pavements by cum 797.84


mechanical means using pneumatic tools,
breaking to pieces not exceeding 0.02 cum
in volume and stock pilling at disignated
locations and disposal of dismantled
materials upto a lead of 1000 metres,
stacking serviceable and unserviceable
materials separately.

2.7 Dismantling guard rails by manual means and Rmt 61.53


disposal of dismantled material with all
lifts and upto a lead of 1000 metres,
stacking serviceable materials and
unserviceable materials separately.

2.8 Dismantling kerb stone by manual means and Rmt 11.31


disposal of dismantled material with all
lifts and upto a lead of 1000 metre

2.9 Dismantling kerb stone channel by manual Rmt 16.96


means and disposal of dismantled material
with all lifts and upto a lead of 1000
metres

2.10A Dismantling of kilometre stone including each 303.65


cutting of earth, foundation and disposal
of dismantled material with all lifts and
lead upto 1000 m and back filling of pit -
5th Kilometre Stone.

2.10B Dismantling of kilometre stone including each 36.55


cutting of earth, foundation and disposal

Puducherry Region
2. Site Clearance and Dismantling
Page No.: 717
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of dismantled material with all lifts and


lead upto 1000 m and back filling of pit -
Hectometre stone

2.10C Dismantling of kilometre stone including each 249.88


cutting of earth, foundation and disposal
of dismantled material with all lifts and
lead upto 1000 m and back filling of pit -
Ordinary kilometre stone

2.11 Dismantling of barbed wire fencing / wire Rmt 39.92


mesh fencing including posts, foundation
concrete, back filling of pit by manual
means including disposal of dismantled
material with all lifts and upto a lead of
1000 metres, stacking serviceable material
and unserviceable material separately.

2.12 Dismantling of CI water pipe line 600mm dia Rmt 97.33


including disposal with all lifts and lead
upto 1000 metres and stacking of
serviceable material and unserviceable
material seperately under supervision of
department concerned.

2.13 Removal of cement concrete pipe of sewer Rmt 119.90


gutter 1500mm dia under the supervision of
department concerned including disposal
with all lifts and upto a lead of 1000
metres and stacking of serviceable and
unserviceable material separately but
excluding earth excavation and dismantling
of masonry works.

2.14 Removal of telephone / electric poles each 142.08


including excavation and dismantling of
foundation concrete and lines under the
supervision of department concerned,
disposal with all lifts and upto a lead of
1000 metres and stacking of serviceable and
unserviceable material separately.

Puducherry Region
3. Earth Work , Erosion Control and Drainages
Page No.: 718
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

3.1 Excavation for roadway in soil using manual cum 137.98


means including loading in truck for
carrying of cut earth to embankment site
with all lifts and lead upto 1000 metres.

3.2 Excavation in ordinary rock using manual cum 200.12


means including loading in truck and
carrying of excavated materials to
embankment site with all lifts and lead
upto 1000 metres.

3.3 Excavation for roadway in soil by cum 89.86


mechanical means including cutting and
pushing the earth to site of embankment
upto a distance of 100 metres (average lead
50 metres) including trimming bottom and
side slopes in accordance with requirements
of lines, grades and cross sections.

3.4 Excavation for roadway in ordinary rock by cum 152.53


deploying a dozer, 80 HP including cutting
and pushing the cut earth to site of
embankment upto a distance of 100 metres
(average lead 50m), trimming bottom and
side slopes in accordance with the
requirements to lines, grades and cross
sections.

3.6 Excavation for roadwork in soil with cum 40.58


hydraulic excavator of 0.9cum bucket
capacity including cutting and loading in
tippers, trimming bottom and side slopes,
in accordance with requirements of lines,
grades and cross sections and transporting
to the embankment location with all lifts
and lead upto 1000m.

3.7 Excavation for roadway in ordinary rock cum 54.34


with hydraulic excavator of 0.9cum bucket
capacity including cutting and loading in
tippers, transporting to embankment site
with in all lifts and lead upto 1000m,
trimming bottom and side slopes, in
accordance with requirements of lines,
grades and cross sections.

3.10 Excavation for roadway in marshy soil with cum 46.23


hydraulic excavator of 0.9cum bucket
capacity including cutting and loading in
tippers and disposal with in all lifts and
lead upto 1000m, trimming bottom and side
slopes, in accordance with requirements of

Puducherry Region
3. Earth Work , Erosion Control and Drainages
Page No.: 719
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

lines, grades and cross sections.

3.11 Removal of unserviceable soil including cum 40.89


excavation, loading and disposal upto 1000
m lead but excluding replacement by
suitable soil which shall be paid
separately as per Clause 305.

3.12 Carrying out excavation in hard rock to sqm 190.53


achive a specified slope of the rock face
by controlled use of explosives and
blasting accessories in properly aligned
and spaced drill holes, collection of the
excavated rock by a 80 HP dozer, loading in
tipper by a front end loader and disposing
of the material with all lifts and lead
upto 1000m, all as specified in Clause
No.303.

3.13.2A Earthwork in excavation of foundation of cum 298.31


structure as per drawing and technical
specification, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom,
backfilling the excavation earth to the
extent required and utilising the
remainging earth locally for road work - by
manual means - depth upto 3m (Ordinary rock
- not requiring blasting)

3.13.2B Earthwork in excavation of foundation of cum 49.94


structure as per drawing and technical
specification, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom,
backfilling the excavation earth to the
extent required and utilising the
remainging earth locally for road work - by
mechanical means - Ordinary rock.

3.13.3A Earthwork in excavation of foundation of cum 536.87


structure as per drawing and technical
specification, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom,
backfilling the excavation earth to the
extent required and utilising the
remainging earth locally for road work - by
manual means - Hard rock - requiring

Puducherry Region
3. Earth Work , Erosion Control and Drainages
Page No.: 720
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

blasting

3.13.4A Earthwork in excavation of foundation of cum 440.12


structure as per drawing and technical
specification, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom,
backfilling the excavation earth to the
extent required and utilising the
remainging earth locally for road work - by
mechanical means - Hard rock - blasting
prohibited.

3.13.5A Earthwork in excavation of foundation of cum 473.00


structure as per drawing and technical
specification, including setting out,
constn. Of shoring and bracing, removal of
stumps and other deleterious matter,
dressing of sides and bottom, backfilling
the excavation earth to the extent required
and utilising the remainging earth locally
for road work - by manual means - depth
upto 3m (Marshy soil)

3.13.5B Earthwork in excavation of foundation of cum 184.31


structure as per drawing and technical
specification, including setting out,
constn. Of shoring and bracing, removal of
stumps and other deleterious matter,
dressing of sides and bottom, backfilling
the excavation earth to the extent required
and utilising the remainging earth locally
for road work - by mechanical means - depth
upto 3m (Marshy soil)

3.13A Earthwork in excavation of foundation of cum 238.65


structure as per drawing and technical
specification, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom,
backfilling the excavation earth to the
extent required and utilising the
remainging earth locally for road work - by
manual means - depth upto 3m (Ordinary
soil)

3.13B Earthwork in excavation of foundation of cum 37.95


structure as per drawing and technical
specification, including setting out,
construction of shoring and bracing,

Puducherry Region
3. Earth Work , Erosion Control and Drainages
Page No.: 721
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

removal of stumps and other deleterious


matter, dressing of sides and bottom,
backfilling the excavation earth to the
extent required and utilising the
remainging earth locally for road work - by
mechanical means - depth upto 3m (Ordinary
soil)

3.14 Scarifying the existing granular road sqm 20.52


surface to a depth of 50mm and disposal of
scarified material within all lifts and
leads upto 1000 metres - by manual means.

3.15 Scarifying the existing bituminous sqm 3.10


surfaceto a depth of 50mm and disposal of
scarified material within all lifts and
lead upto 1000 metres - by mechanical
means.

3.16 Construction of embankment with approved cum 253.28


material obtained from borrowpits with all
lifts and leads, transporting to site,
spreading, grading to required slope and
compacting to meet requirement of Table
300-2.

3.17 Construction of embankment with approved cum 72.85


materials deposited at site from roadway
cutting and excavation from drain and
foundation of other structures graded and
compacted to meet requirement of Table
300-2

3.18 Construction of subgrade and earthern cum 274.76


shoulders with approved materials obtained
from borrowpits with all lifts and leads,
transporting to site, spreading, grading to
required slope and compacted to meet
requirement of Table 300-2.

3.19A Loosening of the ground upto a level of cum 47.13


500mm below the subgrade level, watered,
graded and compacted in layers to meet
requirement of table 300-2 for subgrade
construction.

3.19B Loosening, levelling and compacting cum 26.90


original ground supporting embankment to
facilitate placement of first layer of
embankment, scarified to a depth of 150mm,
mixed with water at OMC and then compacted
by rolling so as to achieve minimum dry

Puducherry Region
3. Earth Work , Erosion Control and Drainages
Page No.: 722
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

density as given in Table 300-2 for


embankment construction

3.20 Stripping, storing of top soil by road side cum 175.12


at 15m internal and re-application on
embankment slopes, cut slopes and other
areas in localities where the available
embankment material is not conducive to
plant growth.

3.21 Stripping of top soil from borrow areas cum 53.91


located in agriculture fields, storing at a
suitable place, spreading and re-laying
after taking the borrow earth to maintain
fertility of the agricultural field,
finishing to the required levels and
satisfaction of the farmer.

3.22 Furnishing and laying of the live sods of sqm 25.78


perennial turf forming grass on embankment
slop, verges or other locations shown on
the drawing or including preparation of
ground, fetching of sods and watering.

3.23 Preparation of seed bed on previously laid sqm 78.81


top soil, furnishing and placing of seeds,
fertilizer, mulching material, applying
bituminous emulsion at the rate of 0.23
litres per sqm and laying and fixing jute
netting, including watering for 3 months
all as per Clause 308.

3.24A Construction of unlined surface drains of Metre 56.95


average cross sectional area 0.40 sqm in
soil to specified lines, grades, levels and
dimensions to the requirement of clase 301
and 309. Excavated material to be used in
embankment within a lead of 50 metres
(average lead 25 metres) - by mechanical
means.

3.24B Construction of unlined surface drains of metre 59.66


average cross sectional area 0.40 sqm in
soil to specified lines, grades, levels and
dimensions to the requirement of clase 301
and 309. Excavated material to be used in
embankment within a lead of 50 metres
(average lead 25 metres) - by manual means.

3.25A Construction of unlined surface drains of metre 115.39


average cross sectional area 0.40 sqm in
ordinary rock to specified lines, grades,

Puducherry Region
3. Earth Work , Erosion Control and Drainages
Page No.: 723
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

levels and dimensions to the requirement of


clase 301 to 309. Excavated material to be
used in embankment at site - by mechanical
means.

3.25B Construction of unlined surface drains of metre 89.49


average cross sectional area 0.40 sqm in
ordinary rock to specified lines, grades,
levels and dimensions as per approved
design and to the requirement of clase 301
to 309. Excavated material to be used in
embankment at site - by manual means.

3.27 Construction of sub surface drain with metre 239.33


perforated pipe of 100mm internal dia of
metal / asbestos cement / cement concrete /
PVC closely jointed, perforations ranging
from 3mm to 6mm depending upon size of
material surrounding the pipe, with 150mm
bedding below the pipe and 300mm cushion
above the pipe cross section of excavation
450x550mm. Excavated material to be
utilised in roadway at site.

3.28 Construction of aggregate sub-surface drain metre 79.82


300x450mm with aggregates confirming to
Table 300-4, excavated material to be
utilised in roadway.

3.30 Preparation and surface treatment of sqm 1.50


formation by removing mud and slurry,
watering to the extent needed to maintain
the desired moisture content, trimming to
the required line, grade, profile and
rolling with 8-10 tonne smooth wheeled
roller, complete as per clause 310.

3.31 Construction of rockfill, embankment with cum 44.79


broken hard rock fragments of size not
exceeding 300mm laid in layers not
exceeding 500mm thick including filling of
surface voids with stone spalls, binding
top layer with granular material, rolled
with vibratory road roller, all complete as
per Clause 313

3.32 Excavation in soil in hilly area by cum 96.76


mechanical means including cutting and
trimming of side slopes and disposing of
excavated earth with all lifts and lead
upto 1000 metres.

Puducherry Region
3. Earth Work , Erosion Control and Drainages
Page No.: 724
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

3.33 Excavation in hilly area in ordinary rock cum 146.22


not requiring blasting by mechanical means
including cutting and trimming of slopes
and disposal of cut material with all lifts
and lead upto 1000 metres.

3.34 Excavation in hilly area in hard rock cum 232.64


requiring blasting by mechanical means
including trimming of slopes and disposal
of cut material with all lifts and lead
upto 1000 metres.

3.36 Construction of embankment with flyash cum 83.55


conforming to table 1 of IRC:SP58-2001
obtained from coal or lignite burning
thermal power stations as waste material,
spread and compacted in layer of 200mm
thickness each at OMC, all as specified in
IRC:SP:58-2001 and as per approved plans.

Puducherry Region
4. Granular Sub-base
Page No.: 725
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

4.1A.1 Construction of granular sub-base by cum 1,018.33


providing close graded material, mixing in
a mechanical mix plant at OMC, carriage of
mixed material to work site, spreading in
uniform layer with motor grader on prepared
surface and compacting with vibratory power
roller to achieve the desired density,
complete as per clause 401of MoRTH
specification, 4th Revision - by plant mix
method for grading I material.

4.1A.2 Construction of granular sub-base by cum 996.00


providing close graded material, mixing in
a mechanical mix plant at OMC, carriage of
mixed material to work site, spreading in
uniform layer with motor grader on prepared
surface and compacting with vibratory power
roller to achieve the desired density,
complete as per clause 401 of MoRTH
specification, 4th Revision - by plant mix
method - for grading II material.

4.1A.3 Construction of granular sub-base by cum 839.20


providing close graded material, mixing in
a mechanical mix plant at OMC, carriage of
mixed material to work site, spreading in
uniform layer with motor grader on prepared
surface and compacting with vibratory power
roller to achieve the desired density,
complete as per clause 401 of MoRTH
specification, 4th Revision - by plant mix
method - for grading III material.

4.1B.1 Construction of granular sub-base by cum 929.38


providing close graded material, spreading
in uniform layer with motor grader on
prepared surface, mixing by mix in place
method with rotavator at OMC and compacting
with vibratory roller to achieve the
desired density, complete as per clause 401
of MoRTH specification, 4th Revision - by
mix in place method - for grading I
material.

4.1B.2 Construction of granular sub-base by cum 907.06


providing close graded meterial, spreading
in uniform layer with motor grader on
prepared surface, by mixing place method
with rotavator at OMC and compacting with
vibratory roller to achieve the desired
density, complete as per clause 401 of
MoRTH specification, 4th Revision - By mix

Puducherry Region
4. Granular Sub-base
Page No.: 726
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

in place method - For grading II material.

4.1B.3 Construction of granular sub-base by cum 750.25


providing close graded meterial, spreading
in uniform layer with motor grader on
prepared surface, by mixing place method
with rotavator at OMC and compacting with
vibratory roller to achieve the desired
density, complete as per clause 401 of
MoRTH specification, 4th Revision - By mix
in place method - For grading III material.

4.2.1 Construction of granular sub-base by cum 970.55


providing coarse graded material,
spreading in uniform layers with motor
grader on prepared surface, mixing by mix
in place method with rotavator at OMC and
compacting with vibratory roller to
achieve the desired density, complete as
per clause 401 of MoRTH specification, 4th
Revision - For grading I material.

4.2.2 Construction of granular sub-base by cum 947.63


providing coarse graded meterial,
spreading in uniform layer with motor
grader on prepared surface, mixing by mix
in place method with rotavator at OMC and
compacting with vibratory roller to
achieve the desired density, complete as
per clause 401 of MoRTH specification, 4th
Revision - For grading II material.

4.2.3 Construction of granular sub-base by cum 806.17


providing coarse graded meterial,
spreading in uniform layer with motor
grader on prepared surface, mixing by mix
in place method with rotavator at OMC and
compacting with vibratory roller to
achieve the desired density, complete as
per clause 401 of MoRTH specification, 4th
Revision - For grading III material.

4.3A Laying and spreading available soil in the cum 187.50


sub-grade on a prepared surface,
pulverising, mixing the spread soil in
place with rotavator with 3 percent slaked
lime having minimum content of 70 percent
CaO, grading with motor grader and
compacting with the road roller at OMC to
the desired density to form a layer of
improved sub-grade - by mechanical means.
(As per MoRTH specification, 4th Revision)

Puducherry Region
4. Granular Sub-base
Page No.: 727
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

4.3B Laying and spreading available soil in the cum 205.71


sub-grade on a prepared surface,
pulverising, mixing the spread soil in
place with rotavator with 3 percent slaked
lime having minimum content of 70 percent
CaO, grading with motor grader and
compacting with the road roller at OMC to
the desired density to form a layer of
improved sub-grade - by manual means. (As
per MoRTH specification, 4th Revision)

4.4 Providing, Laying and spreading soil on a cum 236.99


prepared sub-grade, pulverising, mixing the
spread soil in place with rotavator with 3
percent slaked lime with minimum content of
70 percent of CaO, grading with motor
grader and compacting with the road roller
at OMC to achieve atleast 98 percent of the
maximum dry density to form a layer of
sub-base. (As per MoRTH specification, 4th
Revision)

4.5 Providing, Laying and spreading soil on a cum 580.42


prepared sub-grade, pulverising, adding the
designed quantity of cement to the spread
soil ,mixing in place with rotavator,
grading with the motor grader and
compacting with the road roller at OMC to
achieve the desired unconfined compressive
strength and to form a layer of sub-base /
base. (As per MoRTH specification, 4th
Revision)

4.6.1 Providing, Laying and spreading material on cum 1,491.99


a prepared sub-grade, adding the designed
quantity of cement to the spread material,
mixing in place with rotavator, grading
with the motor grader and compacting with
the road roller at OMC to achieve the
desired unconfined compressive strength and
to form a layer of sub-base. Grading of
material for sub-base course. (As per MoRTH
specification, 4th Revision)

4.6.2 Providing, Laying and spreading material on cum 1,345.88


a prepared sub-grade, adding the designed
quantity of cement to the spread material,
mixing in place with rotavator, grading
with the motor grader and compacting with
the road roller at OMC to achieve the
desired unconfined compressive strength and
to form a layer of base. Grading of

Puducherry Region
4. Granular Sub-base
Page No.: 728
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

material for base course. (As per MoRTH


specification, 4th Revision)

4.7 Making 50 x 50mm furrows, 25mm deep 45 sqm 3.16


degree to the centre line of the road and
at one metre interval in the existing thin
bituminous wearing coarse including
sweeping and disposal of excavated material
within 1000 metres lead. (As per MoRTH
specification, 4th Revision)

4.8 Construction of inverted choke by cum 1,416.96


providing, laying, spreading and compacting
screening B type / coarse sand of specified
grade in uniform layer on a prepared
surface with motorgrader and compacting
with power roller etc. (As per MoRTH
specification, 4th Revision)

4.9.1.1A Providing, laying, spreading and compacting Cum 1,106.51


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller 8-10
tonnes in stages to proper grade and
camber, applying and brooming requisite
type A 13.2mm stone for screening and
gravel for binding to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
mechanical means - Water bound macadam Gr-I
with stone screening. (As per MoRTH
specification, 4th Revision)

4.9.1.1B Providing, laying, spreading and compacting Cum 1,009.82


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum/gravel for
screening and gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by mechanical means - Water bound
macadam Gr-I with Gravel screening. (As per
MoRTH specification, 4th Revision)

4.9.1A Providing, laying, spreading and compacting cum 1,265.43


stone aggregates of specific sizes to water
bound macadam specification including

Puducherry Region
4. Granular Sub-base
Page No.: 729
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

spreading in uniform thickness, hand


packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
type A 13.2mm stone for screening and
gravel for binding to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
manual means - Water bound macadam Gr-I
with stone screening. (As per MoRTH
specification, 4th Revision)

4.9.1B Providing, laying, spreading and compacting cum 1,168.74


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum/gravel for
screening and gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by manual means - Water bound
macadam Gr-I with Gravel screening. (As per
MoRTH specification, 4th Revision)

4.9.2.1A Providing, laying, spreading and compacting Cum 1,054.90


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
type A 13.2mm stone for screening and
gravel for binding to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
mechanical means - Water bound macadam
Gr-II with stone screening 13.2mm metal.
(As per MoRTH specification, 4th Revision)

4.9.2.1B Providing, laying, spreading and compacting Cum 1,140.87


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller 8-10
tonnes in stages to proper grade and
camber, applying and brooming requisite
type B 11.2mm stone for screening and
gravel for binding to fill up the
interstices of coarse aggregate, watering

Puducherry Region
4. Granular Sub-base
Page No.: 730
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and compacting to the required density - by


mechanical means - Water bound macadam
Gr-II with stone screening 11.2mm metal.
(As per MoRTH specification, 4th Revision)

4.9.2.1C Providing, laying, spreading and compacting Cum 1,044.14


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum or gravel for
screening and gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by mechanicall means - Water
bound macadam Gr-II with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)

4.9.2A Providing, laying, spreading and compacting cum 1,213.81


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
type A 13.2mm stone for screening and
gravel for binding to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
manual means - Water bound macadam Gr-II
with stone screening 13.2mm metal. (As per
MoRTH specification, 4th Revision)

4.9.2B Providing, laying, spreading and compacting cum 1,299.78


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller 8-10
tonnes in stages to proper grade and
camber, applying and brooming requisite
type B 11.2mm stone for screening and
gravel for binding to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
manual means - Water bound macadam Gr-II
with stone screening 11.2mm metal. (As per
MoRTH specification, 4th Revision)

4.9.2C Providing, laying, spreading and compacting Cum 1,203.06

Puducherry Region
4. Granular Sub-base
Page No.: 731
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

stone aggregates of specific sizes to water


bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller 8-10
tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum or gravel for
screening and gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by manual means - Water bound
macadam Gr-II with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)

4.9.3.1A Providing, laying, spreading and compacting Cum 1,317.96


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
type B screening and binding materials to
fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by mechanical means -
Water bound macadam Gr-III with type B
11.2mm screening. (As per MoRTH
specification, 4th Revision)

4.9.3.1C Providing, laying, spreading and compacting Cum 1,242.74


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum or gravel for
screening and gravel for binding to fill
up the interstices of coarse aggregate,
watering and compacting to the required
density - by mechanical means - Water bound
macadam Gr-III with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)

4.9.3A Providing, laying, spreading and compacting Cum 1,476.87


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and

Puducherry Region
4. Granular Sub-base
Page No.: 732
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

camber, applying and brooming requisite


type B screening and binding materials to
fill up the interstices of coarse
aggregate, watering and compacting to the
required density - by manual means - Water
bound macadam Gr-III with type B 11.2mm
screening. (As per MoRTH specification, 4th
Revision)

4.9.3C Providing, laying, spreading and compacting Cum 1,401.66


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with vibratory roller
8-10 tonnes in stages to proper grade and
camber, applying and brooming requisite
Crushable type such as moorum or gravel for
screening and gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by manual means - Water bound
macadam Gr-III with moorum or gravel
screening. (As per MoRTH specification, 4th
Revision)

4.10A Breaking and crushing of material obtained cum 178.66


by breaking damaged cement concrete slabs
to size range not exceeding 75mm as
specified in table 400.7 transporting the
aggregates obtained from breaking of cement
concrete slabs at a lead of L km, laying
and compacting the same as sub-base course,
constructed as WBM to Clause 404 except the
use of screening or binding material -
using Vibratory roller. (As per MoRTH
specification, 4th Revision)

4.10B Breaking and crushing of material obtained cum 168.22


by breaking damaged cement concrete slabs
to size range not exceeding 75mm as
specified in table 400.7 transporting the
aggregates obtained from breaking of cement
concrete slabs at a lead of L km, laying
and compacting the same as sub-base course,
constructed as WBM to Clause 404 except the
use of screening or binding material -
using smooth 3 wheeled steel roller. (As
per MoRTH specification, 4th Revision)

4.11 Spraying of bitumen over cleaned dry sqm 16.26


surface of crushed cement concrete base at
the rate of 25kg per 10 sqm by a bitumen

Puducherry Region
4. Granular Sub-base
Page No.: 733
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pressure distributor, spreading of key


aggregates at the rate of 0.13 cum per 10
sqm by a mechanical gritter and rolling the
surface as per Clause 506.3.8. of MoRTH
specification, 4th Revision

4.12A Providing, laying, spreading and compacting cum 1,099.99


graded stone aggregate to wet mix macadam
specification including premixing the
material with water at OMC in mechanical
mix plant carriage of mixed material by
tipper to site, laying in uniform layers
with paver in sub-base / base course on
well prepared surface and compacting with
vibratory roller to achieve the desired
density - Using vibratory roller. (As per
MoRTH specification, 4th Revision)

4.12A.1 Providing , laying , spreading and cum 1,143.06


compacting graded stone aggregate to wet
mix macadam specification including
premixing the material with water at OMC in
mechanical mix plant carriage of mixed
material by tipper to site , laying in
uniform layer by manual means in sub-base /
base course on well prepared surface and
compacting with vibratory roller to achieve
the desired density - Using vibratory
roller

4.12A.2 Providing,laying,spreading and compacting cum 1,123.84


graded stone aggregate to wet mix macadam
specification including premixing the
material with water at OMC using with
concrete mixer at site , laying in uniform
layer by manual means in sub-base / base
course on well prepared surface and
compacting with vibratory roller to achieve
the desired density - Using vibratory
roller

4.12A.3 Providing, laying ,spreading and compacting cum 1,099.01


graded stone aggregate to wet mix macadam
specification including premixing the
material with water at OMC using with
concrete mixer at site , laying in uniform
layer by manual means in sub-base / base
course on well prepared surface and
compacting with rammer by manual means to
achive the desired density.

4.12B Providing, laying, spreading and compacting cum 1,094.74

Puducherry Region
4. Granular Sub-base
Page No.: 734
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

graded stone aggregate to wet mix macadam


specification including premixing the
material with water at OMC in mechanical
mix plant carriage of mixed material by
tipper to site, laying in uniform layers
with paver in sub-base / base course on
well prepared surface and compacting with
smooth 3 wheeled steel roller to achieve
the desired density (As per MoRTH
specification, 4th Revision)

4.12B.1 Providing,laying , spreading and compacting cum 1,137.81


graded stone aggregate to wet mix macadam
specification including premixing the
material with water at OMC in mechanical
mix plant carriage of mixed material by
tipper to site , laying in uniform layer by
manual means in sub-base / base course on
well prepared surface and compacting with
smooth 3 wheeled steel roller to achieve
the desired density.

4.12B.2 Providing , laying , spreading and cum 1,120.50


compacting graded stone aggregate to wet
mix macadam specification including
premixing the material with water at OMC
using with concrete mixer at site,laying in
uniform layer by manual means in sub-base /
base course on well prepared surface and
compacting with smooth 3 wheeled steel
roller to achive the desired density.

4.13 Construction of Median and island above cum 134.26


road level with approved material deposited
at site from roadway cutting and excavation
for drain and foundation of other
structures, spread, graded and compacted as
per clause 407 of MoRTH specification, 4th
Revision

4.14 Construction of Median and island above cum 150.34


road level with approved material brought
from borrowpits, spread, sloped and
compacted as per clause 407 of MoRTH
specification, 4th Revision.

4.16 Construction of footpath / separator by sqm 713.17


providing a 150mm compacted granular
sub-base as per clause 401 and 25mm thick
cement concrete grade M15, overlaid with
precast concrete tiles in cement mortor 1:3
including provision of all drainage

Puducherry Region
4. Granular Sub-base
Page No.: 735
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

arrangements but excluding kerb channel.


(As per MoRTH specification, 4th Revision)

4.17A.1 Providing crushed stone aggregates, cum 902.93


depositing on a prepared surface by hauling
vehicles, spreading and mixing with a motor
grader, watering and compacting with a
vibratory roller to clause 410 of MoRTH
specification, 4th Revision to form a layer
of sub-base / base - by mix in place method
- For 53mm maximum size.

4.17A.2 Providing crushed stone aggregates, cum 926.79


depositing on a prepared surface by hauling
vehicles, spreading and mixing with a motor
grader, watering and compacting with a
vibratory roller to clause 410 of MoRTH
specification, 4th Revision, to form a
layer of sub-base / base - by mix in place
method - For 45mm maximum size.

4.17B.1 Providing crushed stone aggregates, cum 994.20


depositing on a prepared surface by hauling
vehicles, spreading and mixing with a motor
grader, watering and compacting with a
vibratory roller to clause 410 of MoRTH
specification, 4th Revision to form a layer
of sub-base / base - by mixing plant - For
53mm maximum size.

4.17B.2 Providing crushed stone aggregates, cum 1,018.04


depositing on a prepared surface by hauling
vehicles, spreading and mixing with a motor
grader, watering and compacting with a
vibratory roller to clause 410 of MoRTH
specification, 4th Revision, to form a
layer of sub-base / base - by mixing plant
- For 45mm maximum size.

4.18 Construction of sub-base using lime - cum 334.13


flyash admixture with granular soil, free
from organic matter/deleterious material or
clayey silts and low plasticity clays
having PI between 5 and 20 and liquid limit
less than 25 and commercial dry lime,
slaked at site or pre-slaked with CaO
content not less than 50 percent, flyash to
conform to gradation as per clause 4.3 of
IRC:88-1984, lime + flyash content ranging
between 10 to 30 percent, the minimum
unconfined compressive strength and CBR
value after 28 days curing and 4 days

Puducherry Region
4. Granular Sub-base
Page No.: 736
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

soaking to be 7.5 kg/sq.cm. and 25 percent


respectively, all as specified in
IRC:88-1984. (As per MoRTH specification,
4th Revision)

4.91.1A Providing, laying, spreading and compacting Cum 1,096.07


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type A 13.2mm stone for
screening and gravel for binding to fill
up the interstices of coarse aggregate,
watering and compacting to the required
density - by mechanical means - Water bound
macadam Gr-I with stone screening. (As per
MoRTH specification, 4th Revision)

4.91.1B Providing, laying, spreading and compacting Cum 999.38


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth three wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite Crushable type such as
moorum/gravel for screening and gravel for
binding to fill up the interstices of
coarse aggregate, watering and compacting
to the required density - by mechanical
means - Water bound macadam Gr-I with
Gravel screening. (As per MoRTH
specification, 4th Revision)

4.91A Providing, laying, spreading and compacting Cum 1,254.99


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth three wheeld
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type A 13.2mm stone for
screening and gravel for binding to fill
up the interstices of coarse aggregate,
watering and compacting to the required
density - by manual means - Water bound
macadam Gr-I with stone screening. (As per
MoRTH specification, 4th Revision)

4.91B Providing, laying, spreading and compacting Cum 1,158.30

Puducherry Region
4. Granular Sub-base
Page No.: 737
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

stone aggregates of specific sizes to water


bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth three wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite Crushable type such as
moorum / gravel for screening and gravel
for binding to fill up the interstices of
coarse aggregate, watering and compacting
to the required density - by manual means -
Water bound macadam Gr-I with Gravel
screening. (As per MoRTH specification, 4th
Revision)

4.92.1A Providing, laying, spreading and compacting Cum 1,044.45


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type A 13.2mm stone for
screening and gravel for binding to fill
up the interstices of coarse aggregate,
watering and compacting to the required
density - by mechanical means - Water bound
macadam Gr-II with stone screening 13.2mm
metal. (As per MoRTH specification, 4th
Revision)

4.92.1B Providing, laying, spreading and compacting Cum 1,130.42


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type B 11.2mm stone for
screening and gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by mechanical means - Water bound
macadam Gr-II with stone screening 11.2mm
metal. (As per MoRTH specification, 4th
Revision)

4.92.1C Providing, laying, spreading and compacting Cum 1,033.70


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled

Puducherry Region
4. Granular Sub-base
Page No.: 738
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

steel roller 8-10 tonnes in stages to


proper grade and camber, applying and
brooming requisite Crushable type such as
moorum or gravel for screening and gravel
for binding to fill up the interstices of
coarse aggregate, watering and compacting
to the required density - by mechanicall
means - Water bound macadam Gr-II with
moorum or gravel screening. (As per MoRTH
specification, 4th Revision)

4.92A Providing, laying, spreading and compacting Cum 1,203.37


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type A 13.2mm stone for
screening and gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by manual means - Water bound
macadam Gr-II with stone screening 13.2mm
metal. (As per MoRTH specification, 4th
Revision)

4.92B Providing, laying, spreading and compacting Cum 1,289.34


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type B 11.2mm stone for
screening / gravel for binding to fill up
the interstices of coarse aggregate,
watering and compacting to the required
density - by manual means - Water bound
macadam Gr-II with stone screening 11.2mm
metal. (As per MoRTH specification, 4th
Revision)

4.92C Providing, laying, spreading and compacting Cum 1,192.61


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeld
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite Crushable type such as
moorum or gravel for screening and gravel

Puducherry Region
4. Granular Sub-base
Page No.: 739
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

for binding to fill up the interstices of


coarse aggregate, watering and compacting
to the required density - by manual means -
Water bound macadam Gr-II with moorum or
gravel screening. (As per MoRTH
specification, 4th Revision)

4.93.1A Providing, laying, spreading and compacting Cum 1,307.51


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type B screening and
binding materials to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
mechanical means - Water bound macadam
Gr-III with type B 11.2mm screening. (As
per MoRTH specification, 4th Revision)

4.93.1C Providing, laying, spreading and compacting Cum 1,232.30


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite Crushable type such as
moorum or gravel for screening and gravel
for binding to fill up the interstices of
coarse aggregate, watering and compacting
to the required density - by mechanical
means - Water bound macadam Gr-III with
moorum or gravel screening. (As per MoRTH
specification, 4th Revision)

4.93A Providing, laying, spreading and compacting Cum 1,466.43


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type B screening and
binding materials to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
manual means - Water bound macadam Gr-III
with type B 11.2mm screening. (As per
MoRTH specification, 4th Revision)

Puducherry Region
4. Granular Sub-base
Page No.: 740
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

4.93B Providing, laying, spreading and compacting cum 1,391.21


stone aggregates of specific sizes to water
bound macadam specification including
spreading in uniform thickness, hand
packing, rolling with smooth 3 wheeled
steel roller 8-10 tonnes in stages to
proper grade and camber, applying and
brooming requisite type B screening and
binding materials to fill up the
interstices of coarse aggregate, watering
and compacting to the required density - by
manual means - Water bound macadam Gr-III
with moorum or gravel screening. (As per
MoRTH specification, 4th Revision)

Puducherry Region
5. Base & Bituminous Construction
Page No.: 741
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

5.1 Providing and applying primer coat with sqm 25.62


bitumen emulsion on prepared surface of
granular base including clearing of road
surface and spraying primer at the rate of
0.60 kg/sqm using mechanical means. (As per
MoRTH specification, 4th Revision)

5.2 Providing and applying tack coat with sqm 9.21


bitumen emulsion using emulsion pressure
distributor at the rate of 0.20 kg. per
sqm. on the prepared bituminous / granular
surface cleaned with mechanical broom. (As
per MoRTH specification, 4th Revision)

5.3A Providing and laying bituminous macadam cum 5,495.18


with hot mix plant of capacity not less
than 40 to 60 TPH using crushed aggregates
of specified grading premixed with
bituminous binder, transported to site,
laid over a previously prepared surface
with paver finisher to the required grade,
level and alignment and rolled as per
clauses 501.6 and 507.7 of MoRTH
specification, 4th Revision, to achieve the
desired compaction.- Using grade I metal
and bitumen 60/70 grade.

5.3B Providing and laying bituminous macadam cum 5,423.28


with hot mix plant of capacity not less
than 40 -60 TPH using crushed aggregates of
specified grading premixed with bituminous
binder, transported to site, laid over a
previously prepared surface with paver
finisher to the required grade, level and
alignment and rolled as per clauses 501.6
and 507.7 of MoRTH specification, 4th
Revision, to achieve the desired
compaction. - using grade II metal and
bitumen 60/70 grade.

5.4A Construction of penetration macadam over sqm 279.07


prepared base by providing a layer of
compacted crushed coarse aggregate using
chips spreader with alternate applications
of bituminous binder and key aggregates and
rolling with a smooth wheeled steel roller
8-10 tonne capacity to achieve the desired
degree of compaction - 50mm thick (As per
MoRTH specification, 4th Revision)

5.4B Construction of penetration macadam over sqm 379.51


prepared base by providing a layer of

Puducherry Region
5. Base & Bituminous Construction
Page No.: 742
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

compacted crushed coarse aggregate using


chips spreader with alternate applications
of bituminous binder and key aggregates and
rolling with a smooth wheeled steel roller
8-10 tonne capacity to achieve the desired
degree of compaction - 75mm thick (As per
MoRTH specification, 4th Revision)

5.5 Providing, laying and rolling of built-up sqm 223.07


spray grout layer over prepared base
consisting of a two layer composite
construction of compacted crushed coarse
aggregates using motor grader for
aggregates. Key stone chips spreader may
be used with application of bituminous
binder after each layer and with key
aggregates placed on top of the second
layer to serve as a base conforming to the
line, grades and cross-section specified
,the compacted layer thickness being 75mm.
(As per MoRTH specification, 4th Revision)

5.6A Providing and laying dense graded cum 6,282.06


bituminous macadam with HMP of capacity
not less than 40 to 60 TPH using crushed
aggregates of specified grading, premixed
with bituminouse binder @ 4.0 to 4.5 per
cent by weight of total mix and filler,
tranporting the hot mix to work site,
laying with a hydrostatic paver finisher
with sensor control to the required grade,
level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to
achive the desired compaction as per Clause
507 of MoRTH specification, 4th Revision,
complete in all respects - Using grade-I
materials.

5.6B Providing and laying dense graded Cum 6,285.57


bituminous macadam with HMP of capacity
not less than 40 to 60 TPH using crushed
aggregates of specified grading, premixed
with bituminouse binder @ 4.0 to 4.5 per
cent by weight of total mix and filler,
tranporting the hot mix to work site,
laying with a hydrostatic paver finisher
with sensor control to the required grade,
level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to
achive the desired compaction as per Clause
507 of MoRTH specification, 4th Revision,
complete in all respects - Using grade-II

Puducherry Region
5. Base & Bituminous Construction
Page No.: 743
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

materials.

5.7A Providing and laying semi-dense bituminous Cum 6,823.13


concrete with HMP of capacity not less than
40 - 60 TPH using crushed aggregates of
specified grading, premixed with bituminous
binder @ 4.5 to 5 percent of mix and
filler, transporting the hot mix to work
site, laying with a hydrostatic paver
finisher with sensor control to the
required grade, level and alignment,
rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired
compaction as per clause 508 of MoRTH
specification, 4th Revision, complete in
all respects - Using grade-I material and
bitumen 60/70 grade.

5.7A.1 Providing and laying semi-dense bituminous Cum 6,785.34


concrete with HMP of capacity not less than
40 - 60 TPH using crushed aggregates of
specified grading, premixed with bituminous
binder @ 4.5 to 5 percent of mix and
filler, transporting the hot mix to work
site, laying with a hydrostatic paver
finisher with sensor control to the
required grade, level and alignment,
rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired
compaction as per clause 508 of MoRTH
specification, 4th Revision, complete in
all respects - Using grade-I material and
bitumen CRMB

5.7B Providing and laying semi-dense bituminous Cum 7,018.21


concrete with HMP of capacity not less
than 40 - 60 TPH using crushed aggregates
of specified grading, premixed with
bituminous binder @ 4.5 to 5 percent of mix
and filler, transporting the hot mix to
work site, laying with a hydrostatic paver
finisher with sensor control to the
required grade, level and alignment,
rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired
compaction as per clause 508 of MoRTH
specification, 4th Revision, complete in
all respects - Using grade-II material and
using birumen 60/70 grade.

5.7B.1 Providing and laying semi-dense bituminous Cum 6,978.42


concrete with HMP of capacity not less

Puducherry Region
5. Base & Bituminous Construction
Page No.: 744
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

than 40 - 60 TPH using crushed aggregates


of specified grading, premixed with
bituminous binder @ 4.5 to 5 percent of mix
and filler, transporting the hot mix to
work site, laying with a hydrostatic paver
finisher with sensor control to the
required grade, level and alignment,
rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired
compaction as per clause 508 of MoRTH
specification, 4th Revision, complete in
all respects - Using grade-II material and
using birumen CRMB

5.8A.1 Providing and laying bituminous concrete Cum 7,296.44


with HMP of capacity not less than 40 to
60 TPH using crushed aggregates of
specified grading, premixed with bituminous
binder @ 5.4 to 5.6 percent of mix and
filler, transporting the hot mix to work
site, laying with a hydrostatic paver
finisher with sensor control to the
required grade, level and alignment,
rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired
compaction as per clause 509 of MoRTH
specification, 4th Revision, complete in
all respects - Using grade-I material Using
bitumen 60/70.

5.8B.1 Providing and laying bituminous concrete Cum 7,240.00


with HMP of capacity not less than 40 to
60 TPH using crushed aggregates of
specified grading, premixed with bituminous
binder @ 5.4 to 5.6 percent of mix and
filler, transporting the hot mix to work
site, laying with a hydrostatic paver
finisher with sensor control to the
required grade, level and alignment,
rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired
compaction as per clause 509 of MoRTH
specification, 4th Revision, complete in
all respects - Using grade-II
material.-Bitumen 60/70

5.9A Providing and laying surface dressing as Sqm 69.62


wearing course in single coat using crushed
stone aggregate of specified size on a
layer of bituminous binder laid on prepared
surface and rolling with 8-10 tonne smooth
wheeled steel roller - Using 19mm nominal

Puducherry Region
5. Base & Bituminous Construction
Page No.: 745
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

chipping size. (As per as per clause 510


ofMoRTH specification, 4th Revision)

5.9B Providing and laying surface dressing as Sqm 55.61


wearing course in single coat using crushed
stone aggregate of specified size on a
layer of bituminous binder laid on prepared
surface and rolling with 8-10 tonne smooth
wheeled steel roller - Using 13mm nominal
chipping size. (As per as per clause 510 of
MoRTH specification, 4th Revision)

5.10A Providing, laying and rolling of open Sqm 103.31


graded premix surfacing of 20mm thickness
composed of 13.2mm to 5.6mm aggregates
either using penetration grade bitumen or
cut-back or emulsion to required line,
grade and level to serve as wearing course
on a previously prepared base, including
mixing in a suitable plant, laying and
rolling with a smooth wheeled roller 8-10
tonne capacity, finished to required level
and grades - Mechanical method using
penetration grade bitumen and HMP of
appropriate capacity not less than
40 to60 tonne/hour. (As per as per
clause 511 ofMoRTH specification, 4th
Revision)

5.10B Providing, laying and rolling of open Sqm 117.69


graded premix surfacing of 20mm thickness
composed of 13.2mm to 5.6mm aggregates
either using penetration grade bitumen or
cut-back or emulsion to required line,
grade and level to serve as wearing course
on a previously prepared base, including
mixing in a suitable plant, laying and
rolling with a smooth wheeled roller 8-10
tonne capacity, finished to required level
and grades - Open graded premix surfacing
using cationic bitumen emulsion. (As per as
per clause 511 of MoRTH specification, 4th
Revision)

5.11A Providing, laying and rolling of Sqm 131.88


close-graded premix surfacing materials of
20mm thickness composed of 11.2mm to 0.09mm
(Type-A) aggregates using penetration
grade bitumen to the required line, grade
and level to serve as wearing course on a
previously prepared base, including mixing
in a suitable plant, laying and rolling

Puducherry Region
5. Base & Bituminous Construction
Page No.: 746
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with a smooth wheeled roller 8-10 tonne


capacity, and finishing to required level
and grade - Using Type A materials. (As per
as per clause 512 of MoRTH specification,
4th Revision)

5.11B Providing, laying and rolling of Sqm 122.85


close-graded premix surfacing materials of
20mm thickness composed of 13.2mm to
0.09mm (Type-B) aggregates using
penetration grade bitumen to the required
line, grade and level to serve as wearing
course on a previously prepared base,
including mixing in a suitable plant,
laying and rolling with a smooth wheeled
roller 8-10 tonne capacity, and finishing
to required level and grade - Using Type B
materials. (As per as per clause 512
ofMoRTH specification, 4th Revision)

5.12A Providing and laying seal coat sealing the Sqm 50.53
voids in a bituminous surface laid to the
specified levels, grades and cross fall
using Type A seal coat. (As per as per
clause 513 of MoRTH specification, 4th
Revision)

5.12B Providing and laying of premix sand seal Sqm 40.59


coat with HMP of appropriate capacity not
less than 40 to 60 tonne/hour using crushed
stone chipping 6.7 mm size and penetration
bitumen of suitable grade - Type B (As per
as per clause 513 of MoRTH specification,
4th Revision)

5.12C Extra for supply & mixing of waste plastic Kg 22.38


chips of 4.35mm nominal size (Plastic chips
cut from used carry bags tea cups and
other plastic covers etc. including cost of
material charges, loading, unloading
weighing in electronic weigh bridge etc.
complete .

5.14 Providing and laying 25mm thick mastic Sqm 1,045.64


asphalt wearing course with paving grade
bitumen meeting the requirements given in
Table 500-29, prepared by using mastic
cooker and laid to required level and slope
after cleaning the surface, including
providing anti skid surface with bitumen
precoated fine grained hard stone chipping
of 13.2mm nominal size at the rate of 0.005

Puducherry Region
5. Base & Bituminous Construction
Page No.: 747
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cum per 10sqmand at an approximate spacing


of 10cm centre to centre in both
directions, pressed into surface when the
temperature of surface is not less than 100
degree centigrade , protruding 1mm to 4mm
over mastic surface, all complete as per
Clause 515 of MoRTH specification, 4th
Revision.

Puducherry Region
6. Cement Concrete Pavement
Page No.: 748
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

6.1 Construction of dry lean cement concrete cum 2,720.04


Sub-base over a prepared sub - grade with
coarse and fine aggregate conforming to
IS:383, the size of coarse aggregates not
exceeding 25 mm, aggregate cement ratio not
to exceed 15:1,aggregate gradation after
blending to be as per Table 600-1, cement
content not to be less than 150 kg /cum,
optimum moisture content to be determined
during trial length construction, concrete
strength not to be less than 10 Mpa at 7
days, mixed in a batching plant,
transported to site , laid with a paver
with electronic sensor, compacting with
8-10 tonne vibratory roller, finishing and
curing.

6.2 Construction of un-reinforced, dowel cum 5,248.44


jointed, plain cement concrete pavement
over a prepared sub-base with 43 grade
cement @ 400 kg per cum, coarse and fine
aggregate conforming to IS 383, maximum
size of coarse aggregate not exceeding 25
mm, mixed in a batching and mixing plant as
per approved mix design,transported to
site, laid with a fixed form or slip form
paver, spread, compacted and finished in a
continuous operation including provision of
contraction,expansion, construction and
longitudinal joints, joint filler,
separation membrane,sealant primer,joint
sealant, debonding strip,dowel bar,tie rod,
admixtures as approved, curing compound,
finishing to lines and grades as per
drawing.

6.3 Construction of rolled cement concrete base cum 3,025.78


course with coarse and fine aggregate
conforming to IS :383, the size of coarse
aggregate not exceeding 25mm with minimum,
aggregate cement ratio 15:1 and minimum
cement content of 200 kg/cum, aggregate
gradation to be as per Table 600-4 after
blending, mixing in batching plant at
optimum moisture content, transporting to
site, laying with a paver with electronic
sensor, compacting with 8-10tonnes smooth
wheeled vibratory roller to achieve, the
designed flexural strength finishing and
curing.

6.5 Construction of base/sub-base using cum 2,444.51

Puducherry Region
6. Cement Concrete Pavement
Page No.: 749
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement,sand,flyash and coarse aggregates


proportioned as per table 4 of IRC:74-1979
and with water content ratio, slump and
compressive strength as defined in the said
table, mix prepared in a batching and
mixing plant and compacted with a vibratory
roller 8-10 tonnes capacity within the time
limit laid down vide Clause 7.6.3 of
IRC:74-1979, construction joints properly
formed at the end of day's work, cured for
14 days, all as specified in IRC:74-1979
and as per approved plans.

6.6 Construction of un-reinforced, dowel cum 4,994.67


jointed, plain cement concrete pavement
over a prepared sub-base with 43 grade
cement, coarse and fine aggregate
conforming to IS:383, maximum size of
coarse aggregate not exceeding 25mm,
replacing cement by flyash to the extent of
15% and sand by 10%, mixed in a batching
and mixing plant as per approved mix
design, transported to site, laid with a
fixed form or slip form paver spread,
compacted and finished in a continuous
operation including provision of
contraction, expansion, construction and
longitudinal joints, joint filler,
separation membrane,sealant primer, joint
sealant, debonding strip, dowel bar, tie
rod, admixtures as approved, curing
compound, finishing to lines and grades as
per drawing.

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 750
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

8.1A Construction of cement concrete kerb with Rmt 222.85


top and bottom width 115 & 165 mm
respectively, 250mm high in M20 Grade PCC
on M10 grade foundation 150mm thick,
foundation having 50mm projection beyond
kerb stone, kerb stone laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete mixer)

8.1B Construction of cement concrete kerb with Rmt 216.35


top and bottom width 115 & 165 mm
respectively, 250mm high in M20 Grade PCC
on M10 grade foundation 150mm thick,
foundation having 50mm projection beyond
kerb stone, kerb stone laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete batching and mixing plant)

8.2A Construction of cement concrete kerb with Rmt 413.36


channel with top and bottom width 115 & 165
mm respectively, 250mm high in M20 Grade
PCC on M10 grade foundation 150mm thick,
kerb channel 300mm wide, 50 mm thick in
PCC M20 grade, sloped towards the kerb,
kerb stone with channel laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete mixer)

8.2B Construction of cement concrete kerb with Rmt 409.06


channel with top and bottom width 115 & 165
mm respectively, 250mm high in M20 Grade
PCC on M10 grade foundation 150mm thick,
kerb channel 300mm wide, 50 mm thick in
PCC M20 grade, sloped towards the kerb,
kerb stone with channel laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete batching and mixing plant)

8.3A Printing new letters and figures of any per cm ht 0.78


shade with synthetic enamel paint black or per letter
any other approved colour to give an even
shade - Hindi

8.3B Printing new letters and figures of any per cm ht 0.47


shade with synthetic enamel paint black or per letter
any other approved colour to give an even
shade - English and Roman

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 751
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

8.4A Providing and fixing of retro - each 3,823.11


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm (3.8 mtrs height -
6.8kg/mtr = 25.84kg , with board support
angle 35x35x6mm - 3.5 mtrs 3kg/mtr =
10.5kg and anchor flats 0.5kg) firmly fixed
to the ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 90 cm
equilateral triangle . (including cost of
angle iron towards cost of drilling holes ,
nuts , bolts etc.,)

8.4B Providing and fixing of retro - each 2,565.89


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.5 mtrs height -
6.8kg/mtr = 23.8kg , with board support
angle 35x35x6mm-2.30 mtrs - 3kg/mtr =
6.9kg and anchor flat - 0.5kg)firmly fixed
to the ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 60 cm
equilateral triangle . (including cost of
angle iron towards cost of drilling holes ,
nuts , bolts etc.,)

8.4C Providing and fixing of retro - each 3,273.55


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.6 mtrs height -
6.8kg/mtr = 24.48 kg with board support
angle 35x35x6mm - 2.49 mtrs - 3kg/mtr =
7.47kg and anchor flat -0.50kg )firmly
fixed to the ground by means of properly
designed foundation with M15 Grade cement
concrete 45 cm X 45 cm X 60 cm , 60cm below

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 752
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

ground level as per approved drawing. -


60cm Circular .(including cost of angle
iron towards cost of drilling holes , nuts
, bolts etc.,)

8.4D Providing and fixing of retro - each 3,472.42


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.8 mtrs height -
6.8kg/mtr = 25.84 kg with board support
angle 35x35x6mm - 2.8 mtrs - 3kg/mtr =
8.4kg and anchor flats - 0.5kg ) firmly
fixed to the ground by means of properly
designed foundation with M15 Grade cement
concrete 45 cm X 45 cm X 60 cm , 60cm below
ground level as per approved drawing. -
80cm X 60cm rectangular . (including cost
of angle iron towards cost of drilling
holes , nuts , bolts etc.,)

8.4E Providing and fixing of retro - each 3,162.22


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm (3.6 mtrs height -
6.8kg/mtr = 24.48kg , with board support
angle 2.10 mtrs - 3kg/mtr = 6.3 kg and
anchor flat 0.50kg)firmly fixed to the
ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 60 cm X
45cm rectangular . (including cost of angle
iron towards cost of drilling holes , nuts
, bolts etc.,)

8.4F Providing and fixing of retro - each 3,701.34


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.6 mtrs -
6.8kg/mtr = 24.48kg , with board support

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 753
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

angle 35x35x6mm 2.4mtrs - 3kg / mtr =7.2kg


and anchor flat 0.50kg )firmly fixed to the
ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 60 cm X
60cm square . (including cost of angle iron
towards cost of drilling holes , nuts ,
bolts etc.,)

8.4G Providing and fixing of retro - each 5,517.11


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm (3.90 mtrs height -
6.8kg / mtr = 26.52kg , with board support
angle 35x35x6mm 2.88 mtrs - 3kg/mtr =
8.64kg and anchor flat - 0.50 kg)firmly
fixed to the ground by means of properly
designed foundation with M15 Grade cement
concrete 45 cm X 45 cm X 60 cm , 60cm below
ground level as per approved drawing. - 90
cm high octagon . (including cost of angle
iron towards cost of drilling holes , nuts
, bolts etc.,)

8.5 Providing and erecting direction and place sqm 11,649.69


identification retro-reflectorised sign as
per IRC:67 made of aluminium sheet
encapsulated lens reflective ( diamond
grade sheet) with high intensity grade
sheeting vide Clause 801.3, fixed over
aluminium sheeting, 2mm thick with area not
exceeding 0.9sqm supported on a mild steel
single angle iron post 75 X 75 X 6mm
(3.9mtrs height - 6.8kg/mtr = 26.52kg ,with
board support angle 35x35x6mm - 3.8mtrs -
3kg/mtr = 11.40kg and anchor flat 0.50kg
)firmly fixed to the ground by means of
properly designed foundation with M15 grade
cement concrete 45 X 45 X 60 cm, 60cm below
ground level.

8.6 Providing and erecting direction and place sqm 11,623.29


identification retro-reflectorised sign as
per IRC:67 made of aluminium sheet
encapsulated lens reflective sheet (diamond
grade ) with high intensity grade sheeting
vide Clause 801.3, fixed over aluminium

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 754
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

sheeting, 2mm thick with area exceeding


0.9sqm supported on a mild steel angle iron
post 75 X 75 X 6mm , (3.5 mtrs height x2
mtrs) = 7mtrs x 6.8kg/mtr =47.60kg, with
board support angle 35x35x6mm
3mtrs-3.5kg/mtr = 10.50kg with anchor flats
-0.50kg)2 nos firmly fixed to the ground by
means of properly designed foundation with
M15 grade cement concrete 45 X 45 X 60 cm,
60cm below ground level.

8.7A Providing and erecting overhead signs with tonne 46,106.85


a corrosion resistant 2mm thick aluminium
alloy sheet with high intensity grade
retro-reflective sheeting of encapsulated
lens type with vertical and lateral
clearance given in Clauses 802.2 and 802.3
and installed as per Clause 802.7 over a
designed support system of aluminium alloy
or galvanised steel trestles and trusses of
sections and type as per structural design
requirements and approved plans -Truss and
vertical support.(including cost of wastage
,nuts and fabrication charges)

8.7B Providing and erecting overhead signs with sqm 6,408.26


a corrosion resistant 2mm thick aluminium
alloy sheet with high intensity grade
retro-reflective sheeting of encapsulated
lens type with vertical and lateral
clearance given in Clauses 802.2 and 802.3
and installed as per Clause 802.7 over a
designed support system of aluminium alloy
or galvanised steel trestles and trusses of
sections and type as per structural design
requirements and approved plans-Aluminium
alloy plate for over head sign.

8.8 Painting two coats after filling the sqm 52.59


surface with synthetic enamel paint in all
shades on new plastered concrete surfaces.

8.9 Providing and applying two coats of ready sqm 46.44


mix paint of approved brand on steel
surface after thorough cleaning of surface
to give an even shade.

8.10 Providing and applying two coats of ready sqm 51.16


mix paint of approved brand on wood surface
after thorough cleaning of surface to give
an even shade.

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 755
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

8.11.3A Supplying and fixing of cantilever type each 40,319.05


destination sign boards with diamond graded
reflective sheeting in rectangular shape of
size 1.20 m x 0.9 m of double sided board
including the cost and conveyance of
reflective sheeting and providing symbols
and letterings by high intensity grade
reflective white sheeting fixed over the
aluminium plates of all sizes not less than
2 mm thick suitably framed and supported by
M.S. angles of size 40 mm X 40 mm X 6 mm
with required bolt and nuts. The
rectangular board is fixed in the post pipe
of 100 mm dia M.S. Heavy vertically 4.8 mts
height and horizontally 1.2 m and both the
vertical and horizontal are connected by a
100 mm dia M.S. heavy bend with inner
support sleeves welded firmly and a base
plate of size 30 cm X 30 cm welded at the
bottom with necessary anchoring supports.
The board and the post pipe are connected
by 32 mm dia M.S. pipe with suitable bolts
and clamps of 12 cm
length by horizontally 3 places and
vertically 2 places and a cross tie flat is
provided at the bottom of the board with
pipe post to hold the hanging strength.
Finally the board frame and the post pipe
are painted by Zinc chromate primer and
aluminium paint and embedded in ground pit
of size 0.8m X 0.8 m X 0.9 m with PCC 1:2:4
complete

8.11.3B Fabrication, supply and fixing of each 13,738.16


informatory board of size 1.2 m X 0.6 m of
diamond graded reflective sheeting
encapsulated on aluminium sheets of not
less than 2 mm thick suitably supported and
framed by M.S angles of size 40 mm X 40 mm
X 6mm. The informatory lettering and the
symbols will be provided by high intensity
white grade white sheeting. The board is
supported by a post pipe of size 80 mm dia
M.S. heavy for a height of 3.6 m and
extended and supported to the extreme width
of the board on the rear side. This board
frames and post pipes will be painted by
Zinc chromate primer and white colour
enamel paint and embedded in ground pit of
size 0.6m X 0.6 m X 0.6 m with PCC 1:2:4.
Rate includes all materials, labour charges
conveyance concreting, painting

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 756
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

8.11A Painting lines,dashes, arrows,etc., on sqm 111.06


roads in two coats on new work with ready
mixed road marking paint conforming to
IS:164 on bituminous surface,including
cleaning the surface,including cleaning the
surface of all dirt, dust and other foreign
matter,demarcation at site and control-over
10cm in width.

8.11B Painting lines,dashes, arrows,etc., on sqm 97.13


roads in two coats on new work with ready
mixed road marking paint conforming to
IS:164 on bituminous surface,including
cleaning the surface,including cleaning the
surface of all dirt, dust and other foreign
matter,demarcation at site and control-upto
10cm in width.

8.12A Painting lines,dashes, arrows,etc., on sqm 75.86


roads in two coats on old work with ready
mixed road marking paint conforming to
IS:164 on bituminous surface,including
cleaning the surface,including cleaning the
surface of all dirt, dust and other foreign
matter,demarcation at site and control-over
10cm in width.

8.12B Painting lines,dashes, arrows,etc., on sqm 81.03


roads in two coats on old work with ready
mixed road marking paint conforming to
IS:164 on bituminous surface,including
cleaning the surface,including cleaning the
surface of all dirt, dust and other foreign
matter,demarcation at site and control-upto
10cm in width.

8.13 Providing and laying of hot applied sqm 462.09


thermoplastic compound 2.5mm thick
including reflectorising glass beads @ 250
gms per sqm area, thickness of 2.5mm is
exclusive of surface applied glass beads as
per IRC:35. The finished surface to be
level, uniform and free from streaks and
holes.

8.14A Reinforced cement concrete M15 grade Nos 2,980.58


kilometre stone of standard design as per
IRC:8-1980,fixing in position including
painting and printing etc-5th kilometre
stone(precast)

8.14B Reinforced cement concrete M15 grade Nos 1,753.77

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 757
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

kilometre stone of standard design as per


IRC:8-1980,fixing in position including
painting and printing etc-ordinary
kilometre stone(precast)

8.14C Reinforced cement concrete M15 grade Nos 469.05


kilometre stone of standard design as per
IRC:8-1980,fixing in position including
painting and printing etc-Hectometre
stone(precast)

8.15 Supplying and installation of delineators each 927.60


(road way indicators, hazard markers,object
markers),80-100cm high above ground level,
painted black and white in 15cm wide
strips, fitted with 80X100 mm rectangular
or 75mm dia circular reflectorised panels
at the top, buried or pressed into the
ground and conforming to IRC:79

8.16 Reinforced cement concrete M15 grade each 502.23


boundary pillars of standard design as per
IRC:25-1967, fixed in position including
finishing and lettering but excluding
painting.

8.17 Providing and fixing 1.2metres high GI Rmt 192.46


barbed wire fencing with 1.8m angle iron
posts 40 mmX40mmX6mm placed every 3 metres
center to center founded in M15 grade
cement concrete,0.6metre below ground
level,every 15th post,last but one end post
and corner post shall be strutted on both
sides and end post on one side only and
provided with 9 horizontal lines and 2
diagonals interwoven with horizontal wires,
fixed with GI staples, turn buckles etc.
complete as per Clause 807.

8.18 Providing and fixing 1.8m high GI barbed Rmt 311.83


wire fencing with 2.4m iron posts
50mmX50mmX6mm placed every 3 metre center
to center founded in M15 grade cement
concrete 0.6 metre below ground
level,every 15th post last but one end post
and corner post on one side only and
provided with 12 horizontal lines and 2
diagonals inetrwoven with horizontal wires,
fixed with GI staples, turn buckles etc.,
complete as per Clause 807.

8.19 Providing 1.2m high fencing with angle Rmt 492.13

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 758
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

iron posts 50mmX50mmX6mm at 3 metre center


to centerwith 0.40 metre embedded in M15
grade cement concrete, corner,end and every
10th post to be strutted, provided with
welded steel wire fabric of 75mmX50mm mesh
or 75mmX25mm mesh and fixed to iron posts
by flat iron 50X5mm and bolts etc,.
Complete in all respects.

8.20 Providing, fixing and erecting 50mm dia Rmt 1,281.17


steel pipe railing in 3 rows duly painetd
on medium weight steel channels (ISMC
series) 100 mmX 50 mm, 1.2 metre high above
ground, 2m center to centre, complete as
per approved drawings.

8.21 Providing, fencing and erecting 50mm dia Rmt 898.67


painted steel pipe railing in 3 rows on
precast M20 grade RCC vertical posts 1.8
metre high (1.2 m above GL) with 3 holes 50
mm dia pipe,fixed 2 metre centre to,
complete as per approved drawing.

8.22 Provision of an reinforced cement concrete Linear met 1,284.13


crash barrier at the edges of the road, re
approaches to bridge structures and
medians, constructed with M20 grade
concrete with HYSD reinforcement conforming
to IRC:21 and dowel bars 25 mm dia,450mm
long at expansion joints filled with
pre-moulded ashpalt filler board, keyed to
the structure on which it is built and
installed as per design given in the
enclosure to MOST circular
No.RW/NH-33022/1/94-DO III dated 24th June
1994 as per dimensions in the approved
drawing and at locations .

8.23A Providing and erecting a "W" metal beam Rmt 1,869.65


crash barrier comprising of 3mm thick
corrugated sheet metal beam rail,70 cm
above road/ ground level, fixed on ISMC
series channel vertical post,150X75X5 mm
spaced 2 m centre-to-centre,1.8 m high,1.1m
below ground/road level, all steel parts
and fittings to be galvanished by hot dip
process , all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with a spacer of
channel section 150X75X5mm, 330m long
complete as per Clause 810.

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 759
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

8.23B Providing and erecting a "Thrie" metal beam Rmt 2,608.46


crash barrier comprising of 3mm thick
corrugated sheet metal beam rail,85 cm
above road/ ground level,fixed on ISMC
series channel vertical post,150X75X5 mm
spaced 2 m centre-to-centre,2 m high with
1.15m below ground level, all steel parts
and fitments to be galvanised by hot dip
process, all fittings to conform to IS:1367
and IS:1364, metal beam rail to be fixed on
the vertical post with a spacer of channel
section 150X75X5mm, 546mm long complete as
per Clause 810.

8.24 Supplying and fixing of plastic speed bump Rum 3,718.90


made out of ABS material. It can bear a
load of 80 Tons (Approx).Two highly
reflective reflectors moulded in PMMA
materials are welded with ABS base plate
through ultra sonic welding process and
then fixed on to the speed bump so that
dust and water cannot touch reflector's
inside area and this it maintains its
reflectivity for a long time. The speed
bump is designed so dynamically and compact
that it can bear maximum load on it. Size
of the speed bump; Length-750 mm,
Width-250mm, Height- 75mm. It is available
in yellow/black combination. It is also
available in White/Black combination.

8.25 Supply and installation of solar powered each 52,641.39


LED Amber blinkers 24 hours operation with
Ultra bright Amber/ Red Solid State LED's.
the operating voltage is 24 V and the
battery and the LED's array enclosure is
300 mm dia with protection glass. The
system shall blink 30 blinks per minute.
Battery shall be of SMF and expected life
shall be 2 years and panel life shall be
expected 10 years. The visibility shall be
800 mts. The blinker shall be fixed in G.I.
pipe class B of 4" dia reduced to 3" dia
G.I.pipe class B. the rate shall include
fixing below ground level of 1.20mts depth
embedded in CC 1:2:4 of size 50 cm X 50 cm,
pipe painted with primer and two or more
coat enamel paint of required colour all as
directed

8.30 Tile work in skiriting raising of steps and Sqm 948.86


dado (upto 2m height ) over 12 mm thick bed

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 760
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

of cement mortar 1:3 (1 cement : 3 sand )


and jointed with grey cement slurry at
3.3kg / 1sqm, including grooves joints 10mm
wide and 10mm deep on all sides of tiles
etc., complete flamed granite tiles 10mm
thick.

8.31 Fabrication , supply and fixing of nos 12,579.77


informatory board of high intensity grade
reflection sheeting encapsulated on
aluminium sheets of not less than 2mm thick
suitably supported and framed by M.S angles
of size 40mm x40mmx6mm .(not less than
25.2kg) The informatory lettering and the
symbols will be provided by high intensity
white graded white sheeting . The board is
supported by a post pipe or channel
whichever required for the required height.
The board frames shall be painted with
enamel paint two coats on rear side and
fixed in the ground pit of required size.
Rate includes all materials , labour
charges ,conveyance, painting except the
cost of post and fixing with P.C.C.works

8.32 Fabrication,supply and fixing of nos 17,736.56


informatory board of diamond graded
reflective sheeting encapsulated on
aluminium sheets of not less than 2mm thick
suitably supported and framed by M.S.angles
of size 40mm x 40mm x 6mm (not less than
25.2 kg). The informatory lettering and the
symbols will be provided by high intensity
white graded white sheeting. The board is
supported by a post pipe or channel
whichever required for the required height.
The board frames shall be painted with
enamel paint two coats on rear side and
fixed in the ground pit of required size.
Rate includes all materials, labour
charges,conveyance, painting except the
cost of post and fixing with P.C.C. works

Puducherry Region
9. Pipe Culverts
Page No.: 761
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

9.1 Plain cement concrete 1:3:6 mix with cum 3,459.35


crushed stone aggregate 40mm nominal size
mechanically mixed, placed in foundation
and compacted by vibration including curing
for 14 days.

9.2A Laying reinforced cement concrete pipe Np4/ metre 5,066.37


prestressed concrete pipe for culverts on
first class bedding of granular material in
single row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works, backfilling,concrete and
masonry works in head walls and
parapets-1000mm dia.

9.2B Laying reinforced cement concrete pipe Np4/ metre 5,160.67


prestressed concrete pipe for culverts on
first class bedding of granular material in
single row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works, backfilling,concrete and
masonry works in head walls and
parapets-1200mm dia.

9.3A Laying reinforced cement concrete pipe Np4/ metre 10,245.54


prestressed concrete pipe for culverts on
first class bedding of granular material in
double row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works back filling, concrete and
masonry works in head walls and parapets -
1000mm. Dia .

9.3B Laying reinforced cement concrete pipe Np4/ metre 10,442.21


prestressed concrete pipe for culverts on
first class bedding of granular material in
double row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works back filling, concrete and
masonry works in head walls and parapets -
1200mm. Dia.

Puducherry Region
10. Maintenance of Roads
Page No.: 762
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

10.1 Restoration of rain cuts with soil, murram cum 500.23


gravel or a mixture of these clearing the
loose soil benching for 300mm width, laying
fresh material in layers not exceeding
250mm and compacting with plate compactor
or power rammers, to restore the original
alignment, levels and slopes.

10.2 Making up loss of material/irregularities sqm 73.04


on shoulder to the design level by adding
fresh approved soil and compacting it with
appropriate equipment.

10.3 Stripping excess soil from shoulder surface sqm 9.96


to achieve the approved level and
compacting it with plate compactor.

10.4 Removal of all failed material, trimming of sqm 99.82


completed excavation to provide firm
vertical faces, cleaning of surface,
painting of tack coat on the sides and the
base of excavation as per Clause 503,
backfilling the pot - holes with hot
bituminous material as per clause 511,
compacting trimming and finishing the
surface to form a smooth continuous
surface, all as per Clause 3004.2.

10.5A Removal of all failed material, trimming of sqm 260.51


completed excavation to provide firm
vertical faces, cleaning of surface,
painting of tack coat on the sides and the
base of excavation as per Clause 503,
backfilling the pot - holes with hot
bituminous material as per clause 504,
compacting trimming and finishing the
surface to form a smooth continuous
surface, all as per Clause 3004.2 - Grading
I - 19mm (Nominal Size)

10.5B Removal of all failed material, trimming of sqm 258.31


completed excavation to provide firm
vertical faces, cleaning of surface,
painting of tack coat on the sides and the
base of excavation as per Clause 503,
backfilling the pot - holes with hot
bituminous material as per clause 504,
compacting trimming and finishing the
surface to form a smooth continuous
surface, all as per Clause 3004.2 - Grading
II - 13mm (Nominal Size)

Puducherry Region
10. Maintenance of Roads
Page No.: 763
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

10.6 Filling of crack using slow curing bitumen Rmt 3.29


emulsion and applying crusher dust in case
cracks are wider than 3 mm.

10.7 Applying crusher dust to areas of road sqm 1.13


where bleeding of excess bitumen has
occurred.

10.9 Repair of spalled joint grooves of Rmt 388.50


contraction joints, longitudinal joints and
expansion joints in concrete pavements
using epoxy mortar or epoxy concrete.

10.10 Removal of existing sealant and re-sealing Rmt 31.17


of contraction,longitudinal or expansion
joints in concrete pavement with fresh
sealant material.

10.11 Removal of earth from the choked hill side Rmt 31.01
drain and disposing it on the valley side
manually.

10.12 Clearance of landslides in soil and cum 46.34


ordinary rock by a bull-dozer D 80 A-12
180HP and disposal of the same on the
valley side.

10.13 Clearing of landslide in hard rock cum 117.30


requiring blasting for 50 percent of the
boulders and disposal of the same on the
valley side.

Puducherry Region
11. Horticulture
Page No.: 764
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.1 Spreading of sludge farm yard manure or/ cum 59.66


and good earth in required thickness(cost
of sludge, farm-yard manure or/and good
earth to be paid for separately)

11.2A Grassing with 'Doob' grass including sqm 8.78


watering and maintenance of the lawn for 30
days or more tlii the grass forms a thick
lawn free from weeds and fit for moving
including supplying good earth if needed-in
rows 15cm apart in either direction.

11.2B Grassing with 'Doob' grass including sqm 13.34


watering and maintenance of the lawn for 30
days or more tlii the grass forms a thick
lawn free from weeds and fit for moving
including supplying good earth if needed-in
rows 7.5 cm apart in either direction.

11.3 Making lawns including ploughing and sqm 8.27


breaking of clod, removal of rubbish,
dressing and supplying doobs grass roots
and planting at 15 cm apart, including
supplying and spreading of farm yard manure
at rate of 0.18 cum per 100 sqm.

11.4 Maintenance of lawns or Turfing of slopes sqm 124.89


(rough grassing) for a period of one year
including watering,etc.

11.5 Turfing lawns with fine grassing including sqm 12.28


ploughing, dressing including breaking of
clods, removal of rubbish, dressing and
supplying doob grass roots at 10 cm apart,
including supplying and spreading of
farmyard manure at rate of 0.6 cum per 100
sqm.

11.6 Maintenance of lawns with fine grassing for sqm 103.85


the first year including watering, etc.,

11.7A Planting permanent hedges including digging Rmt 131.13


of trenches, 60 cm wide and 45 cm deep,
refilling the excavated earth mixed with
farmyard manure, supplied at the rate of
4.65 cum per 100 metre and supplying and
planting two rows of hedge plants at 30 cm
apart.

11.7B Maintenance of hedge for one year Rmt 139.49

11.8A Planting flowering plants and shrubs in Rmt 35.41

Puducherry Region
11. Horticulture
Page No.: 765
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

central verge - 200 plants and 800 shrubs


in two rows in one km length of road where
width of verge is 3m and above.

11.8B Maintenance of flowering plants and shrubs km 1,45,441.90


in central verge for one year - 200 plants
and 800 shrubs in two rows in one km length
of road where width of verge is 3m and
above.

11.9 Planting of trees by the roadside (Avenue each 713.62


trees) in 0.60 m dia holes, 1 m deep dug in
the ground, mixing the soil with decayed
farmyard/ sludge manure, planting the
saplings, backfilling the trench, watering,
fixing the tree guard and maintaining the
plants for one year.

11.10 Renovation lawns including weeding forking sqm 12.22


the ground, top dressing with forked soil,
watering and maintenance the lawns, for 30
days or more, till the grass forms a thick
lawn, free from weeds, and fit for moving
and disposal of rubish as directed,
including supplying good earth, if needed
but excluding the cost of well decayed
farmyard manure.

11.11 Supply at site of work well decayed farm cum 223.82


yard manure, from any available source,
approved , screening and stacking.

11.12 Supply at site of work / store - deoiled quintal 805.75


neem cake duly packed in used gunny bags.

11.13 Supplying sludge duly stacked at site/store cum 26.86

11.14 Half brick circular tree guard in 2nd class each 1,142.08
brick internal diametre 1.25 m and height
1.2 m above ground and 0.20 m below ground,
bottom two courses laid dry and top three
courses in cement mortar 1:6 (1 cement: 6
sand) and the intermediate courses being in
dry honey comb masonry as per design
complete.

11.15 Edging with 2nd class bricks, laid dry metre 22.60
lengthwise, including excavation,
refilling, consolidation, with a hand
packing and spreading nearly surplus earth
within a lead of 50 metre.

Puducherry Region
11. Horticulture
Page No.: 766
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

11.16 Making tree guard 53 cm dia and 1.3 m high each 1,272.47
as per Design from empty bitumen drum, slit
suitably to permit sun and air, (supplied
by the department at stock issue rate)
including providing and fixing 2 nos. MS
sheet rings 50 x 0.5 mm with rivets,
complete in all respect.

11.17 Maing tree guard 53 cm dia 2 metre high as each 2,813.54


per design from empty bitumen drums, slit
suitably to permit sun and air, (supplied
by the department at stock issue rate)
including providing and fixing four legs 40
cm long of 30 x 3 mm MS riveted to tree
guard and providing and fixing 2 nos. MS
sheet rings 50 x 0.5 mm with rivets
complete in all respects.

11.18 Wrought iron and mild steel welded work quintal 5,540.42
(using angles, square bars, tees and
channel grills, grating frames, gates and
treeguards of any size and design etc.
including cost of screens and welding rods
or bolts and nuts complete fixed in
position but without the cost of excavation
and concrete for fixing which will be paid
separately.

11.19 Providing and fixing MS iron tree guard 60 each 1,371.87


cm dia and 2 metre high abvoe ground level
formed of 4 Nos. (25 x 6 mm) and 8 Nos. (
25 x 3 mm)vertical MS riveted to 3 Nos. (25
x 6 mm) iron rings in two halves, bolted
together with 8 mm dia and 30 mm long bolts
including painting two coats with paint of
approved brand over a coat of priming
complete in all respects.

11.20 Providing and fixing tree guard 0.60 metre each 1,880.70
square, 2 metre high fabricated with MS
angle iron 30 x 30 x 3 mm, MS iron 25 x 3
mm and steel wire 3 mm dia welded and
fabricated as per design in two halves
bolted together.

11.21 Planting trees as compensatory hectare 74,862.90


afforestation at the rate of 290 trees per
hectare at a spacing of 6 m by grubbing and
levelling the ground upto a depth of 150 mm
, digging holes 0.9 m dia, 1 m deep, mixing
farm yard / sludge manure with soil,
planting of sapling 2 m high with 25 cm dia

Puducherry Region
11. Horticulture
Page No.: 767
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

stem, backfilling the hole and watering.

11.29A Supply of circular shaped steel tree guard sqm 413.52


of 45 cm dia and 1.5m height, which
includes leg height of 15 cm. The tree
guard circular frame is made out of 3 nos
of horizontal rings using 20mm X 6mm, M.S.
flats and vertical legs of 3 nos using 10
mm rod, intermediate gaps are welded with 9
nos of 6 mm rod verticals. The tree guard
will be painted in green colour and
required lettering will be provided in the
name boards of size 23 cm X 51 cm at center
and 15 cm X 51cm at the top using 20 gauge
thick sheet, supported with 20 mm X 6mm
M.S.flats at rear side all complete.

11.30 Providing and laying soft Korean grass sqm 624.00


turfing including supplying red earth,
manure, river sand, labour charges for
ground preparation spreading earth and
manure transportation of all and
maintaining the lawn for initial three
months etc. complete.

Puducherry Region
12. RBI grade 81
Page No.: 768
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12.1.MR Providing , laying , spreading and cum 1,346.62


compacting available soil (excluding clay
soils) in Sub - grade course including
premixing 2% of RBI 81 product in a
mechanical mixer, carriage of mixed
material up to 1KM spreading in uniform
layers with motor grader on a prepared base
including watering and compacting with 8 to
10 tonne vibratory power roller to achieve
the desired density including all materials
, labour , HOM of machinery , etc complete
as per specifications.

12.2.MR Providing , laying , spreading and cum 1,955.41


compacting available clay soil in Sub -
grade course including premixing 4% of RBI
Additive & 2 % of RBI 81 product in a
mechanical mixer, carriage of mixed
material up to 1KM spreading in uniform
layers with motor grader on a prepared base
including watering and compacting with 8 to
10 tonne vibratory power roller to achieve
the desired density including all materials
, labour , HOM of machinery , etc complete
as per specifications.

12.3.MR Providing , laying , spreading and cum 2,005.55


compacting available soil (excluding clay
soils) in Sub - base course including
premixing 3% of RBI 81 product in a
mechanical mixer, carriage of mixed
material up to 1KM spreading in uniform
layers with motor grader on a prepared base
including watering and compacting with 8 to
10 tonne vibratory power roller to achieve
the desired density including all materials
, labour , HOM of machinery , etc complete
as per specifications.

12.4.MR Providing , laying , spreading and cum 3,254.34


compacting available clay soil in Sub -
base course including premixing 25% Stone
dust, 4% of RBI Additive & 4 % of RBI 81
product in a mechanical mixer, carriage of
mixed material up to 1KM spreading in
uniform layers with motor grader on a
prepared base including watering and
compacting with 8 to 10 tonne vibratory
power roller to achieve the desired density
including all materials , labour , HOM of
machinery , etc complete as per
specifications.

Puducherry Region
12. RBI grade 81
Page No.: 769
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12.5.MR Providing , laying , spreading and cum 3,174.66


compacting available soil (excluding clay
soil) in base course including premixing
25% 10 mm Aggregate, 25% 20 mm Aggregate &
4 % of RBI 81 product in a mechanical
mixer, carriage of mixed material up to 1KM
spreading in uniform layers with motor
grader on a prepared base including
watering and compacting with 8 to 10 tonne
vibratory power roller to achieve the
desired density including all materials ,
labour , HOM of machinery , etc complete as
per specifications.

12.6.MR Providing , laying , spreading and cum 3,451.97


compacting stabilized aggregate in base
course including premixing 25% 10 mm
Aggregate, 25% 20 mm Aggregate , 50% of
stone dust & 4% of RBI 81 product in a
mechanical mixer, carriage of mixed
material up to 1KM spreading in uniform
layers with motor grader on a prepared base
including watering and compacting with 8 to
10 tonne vibratory power roller to achieve
the desired density including all materials
, labour , HOM of machinery , etc complete
as per specifications.

Puducherry Region
BRIDGE WORK
(MORTH)
12. Foundation
Page No.: 770
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12.1.1A.1 Earth work in excavation for foundation of cum 162.66


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Ordinary Soil - Manual Means - Depth upto 3
metres including the cost of labour and
overhead charges.

12.1.1A.2 Earth work in excavation for foundation of cum 209.14


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Ordinary Soil - Manual Means - 3 metres to
6 metres depth including the cost of labour
and overhead charges.

12.1.1A.3 Earth work in excavation for foundation of cum 278.85


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Oridnary Soil - Manual Means - Depth above
6 metres including the cost of labour and
overhead charges.

12.1.1B.1 Earth work in excavation for foundation of cum 73.90


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Oridnary Soil - Mechanical Means - Depth
upto 3 metres including the cost of labour
hire charge of hydraulic excavator and
overhead charges.

12.1.1B.2 Earth work in excavation for foundation of cum 84.46


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -

Puducherry Region
12. Foundation
Page No.: 771
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

Oridnary Soil - Mechanical Means - 3 metres


to 6 metres depth including the cost of
labour, hire charge of hydraulic excavator
and overhead charges.

12.1.1B.3 Earth work in excavation for foundation of cum 103.70


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Oridnary Soil - Mechanical Means - above 6
metres depth including the cost of labour,
hire charge of hydraulic excavator and
overhead charges.

12.1.2A Earth work in excavation for foundation of cum 232.38


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Ordinary rock (not requireing blasting) -
Manual Means - depth upto 3 metres
including the cost of labour and overhead
charges.

12.1.2B Earth work in excavation for foundation of cum 93.37


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Ordinary rock (not requiring blasting)-
Mechanical Means - depth upto 3 metres
including the cost of labour, hire charge
of hydraulic excavator and overhead
charges.

12.1.3A Earth work in excavation for foundation of cum 625.99


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material - Hard
rock (Requiring Blasting) - Manual Means
including the cost of labour, blasting
material, detonators, hire charge for air

Puducherry Region
12. Foundation
Page No.: 772
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

compressor and overhead charges.

12.1.4A Earth work in excavation for foundation of cum 504.36


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material - Hard
rock (Blasting prohibited) - Mechanical
Means - depth upto 3 metres - including the
cost of labour, hire charge for air
compressor and overhead charges.

12.1.5A Earth work in excavation for foundation of cum 600.75


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material - Marshy
soil - Manual Means - upto 3 metres depth -
including the cost of labour, hire charge
of tractor and overhead charges.

12.1.5B Earth work in excavation for foundation of cum 154.64


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material - Marshy
soil - Mechanical Means - upto 3 metre
depth including the cost of labour, hire
charge for tipper, hydraulic excavator and
overhead charges.

12.1.6 Earth work in excavation for foundation of cum 406.73


structures as per drawings and technical
specifications, including setting out,
construction of shoring and bracing,
removal of stumps and other deleterious
matter, dressing of sides and bottom and
backfilling with approved material -
Backfilling in Marshy Foundation Pits
including the cost of labour, hire charge
for tractor and overhead charges.

12.3 Sand filling in foundation trenches as per cum 2,247.47


drawing and technical specification
including the cost of labour, material and
overhead charges.

Puducherry Region
12. Foundation
Page No.: 773
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12.4 Plain Cement Concrete 1:3:6 nominal mix in cum 5,239.97


foundation with crushed stone aggregate 40
mm nominal size mechancially mixed, placed
in foundation and compacted by vibration
including curing for 14 days including the
cost of labour, material, hire charge for
concrete mixer, electirc gen set, water
tanker and overhead charges.

12.5 Brick Masonry in Cement Mortar 1:3 in cum 5,966.74


foundation complete excluding Pointing and
Plastering, as per drawing and technical
specifications including the cost of
labour, material and overhead charges.

12.6 Cement Mortar 1:3 (1 Cement : 3 sand) cum 7,102.66


including the cost of labour, material and
overhead charges.

12.7A Stone Masonry work in cement mortar 1:3 in cum 5,509.26


foundation complete as per drawing and
Technical specifications - Square rubble
coursed rubble masonry (First sort)
including the cost of labour, material and
overhead charges.

12.7B Stone Masonry work in cement mortar 1:3 in cum 5,361.10


foundation complete as per drawing and
Technical specifications - Random rubble
masonry (coursed / uncoursed) including
the cost of labour, material and overhead
charges.

12.8A Plain cement concrete in open foundation cum 5,995.14


complete as per drawing and technical
specifications - PCC Grade M15 with a
minimum cement content of 275 kg / cum
including the cost of labour, material hire
charge for concrete mixer, electric gen
set, form work and overhead charges.

12.8B Plain cement concrete in open foundation cum 6,718.17


complete as per drawing and technical
specifications - PCC Grade M20 with a
minimum cement content of 344 kg / cum
including the cost of labour, material,
hire charge for concrete mixer, electric
gen set, form work and overhead charges.

12.8C.1 Reinforced cement concrete in open cum 6,842.44


foundation complete as per drawing and
technical specifications - RCC Grade M20

Puducherry Region
12. Foundation
Page No.: 774
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

with a minimum cement content 347 kg / cum


- Using concrete mixer including the cost
of labour, material, hire charge for
electric genset, formwork and overhead
charges.

12.8C.2 Reinforced cement concrete in open cun 6,094.42


foundation complete as per drawing and
technical specifications - RCC Grade M20
with a minimum cement content of 347 kg /
cum - With Batching Plant, Transit Mixer
and Concrete Pump, electric gen set, front
end loader including the cost of labour,
material, formwork and overhead charges.

12.8D.1 Plain cement concrete in open foundation cum 7,246.52


complete as per drawing and technical
specifications - PCC Grade M25 with a
minimum cement content of 400 kg / cum -
Using Concrete Mixer and electric genset
including the cost of labour and material,
formwork and overhead charges.

12.8D.2 Plain cement concrete in open foundation cum 6,504.40


complete as per drawing and technical
specifications - PCC Grade M25 with a
minimum cement content of 400 kg / cum -
With Batching Plant, Transit Mixer and
Concrete Pump, front end loader, electric
gen set including the cost of labour,
material, formwork and overhead charges.

12.8E.1 Reinforced cement concrete in open cum 7,377.05


foundation complete as per drawing and
technical specifications - RCC Grade M25
with a minimum cement content of 403 kg /
cum - Using Concrete Mixer and electric gen
set including the cost of labour, material,
form work and overhead charges.

12.8E.2 Reinforced cement concrete in open cum 6,630.83


foundation complete as per drawing and
technical specifications - RCC Grade M25
with a minimum cement content of 403 kg /
cum - With Batching Plant, Transit Mixer
and Concrete Pump, front end loader,
electric gen set including the cost of
labour, material, formwork and overhead
charges.

12.8F.1 Plain cement concrete in open foundation cum 7,287.96


complete as per drawing and technical

Puducherry Region
12. Foundation
Page No.: 775
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

specifications - PCC Grade M30 with a


minimum cement content of 405 kg / cum -
using Concrete Mixer and electric gen set
including the cost of labour, material,
formwork and overhead charges.

12.8F.2 Plain cement concrete in open foundation cum 6,560.85


complete as per drawing and technical
specifications - PCC Grade M30 with a
minimum cement content of 405 kg / cum -
Using Batching Plant, Transit Mixer and
Concrete Pump, front end loader, electric
gen set including the cost of labour,
material, formwork and overhead charges.

12.8G.1 Reinforced Cement Concrete in open cum 7,392.00


foundation complete as per drawing and
technical specifications - RCC Grade M30
with a minimum cement content of 407 kg /
cum - Using Concrete Mixer and electric gen
set including the cost of labour, material,
formwork and overhead charges.

12.8G.2 Reinforced Cement Concrete in open cum 6,649.21


foundation complete as per drawing and
technical specifications - RCC Grade M30
with a minimum cement content of 407 kg /
cum - Using Batching Plant, Transit Mixer
and Concrete Pump,front end loader,
electric gen set including the cost of
labour material, formwork and overhead
charges.

12.8H.1 Reinforced Cement Concrete in open cum 7,506.08


foundation complete as per drawing and
technical specifications - RCC Grade M35
with a minimum cement content of 422 kg /
cum - Using Concrete Mixer and electric gen
set including the cost of labour, material,
formwork and overhead charges.

12.8H.2 Reinforced Cement Concrete in open cum 6,766.88


foundation complete as per drawing and
technical specifications - RCC Grade M35
with a minimum cement content of 422 kg /
cum - Using Batching Plant, Transit Mixer
and Concrete Pump, front end loader,
electric gen set including the cost of
labour, material, formwork and overhead
charges.

12.11C.4.1 Plain Cement Concrete, in Well Foundation cum 7,590.62

Puducherry Region
12. Foundation
Page No.: 776
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

complete as per Drawing and Technical


Specifications - Bottom Plug - PCC Grade
M35 with a minimum cement content of 419 kg
/ cum - Using Concrete Mixer

12.11C.4.2 Plain Cement Concrete, in Well Foundation cum 6,712.21


complete as per Drawing and Technical
Specifications - Bottom Plug - PCC Grade
M35 with a minimum cement content of 419 kg
/ cum - Using Batching Plant, Transit Mixer
and Crane / Concrete Pump, front end
loader, electric gen set including the cost
of labour, material, admixtures and
overhead charges.

12.11F.4.1 Reinforced cement concrete, in well cum 7,506.08


foundation complete as per drawing and
technical specifications - well cap - RCC
grade M35 with a minimum cement content of
422 kg / cum - Using concrete mixer and
electric gen set including the cost of
labour, material, formwork and overhead
charges.

12.11F.4.2 Reinforced cement concrete, in well cum 6,637.58


foundation complete as per drawing and
technical specifications - well cap - RCC
grade M35 with a minimum cement content of
422 kg / cum - Using Batching plant ,
transit mixer and concrete pump, front end
loader, electric gen set including the cost
of labour, material, formwork and overhead
charges.

12.22 Providing steel liner 10mm thick for curbs MT 81,442.63


and 6mm thick for steining of wells
including fabricating and setting out as
per detailed drawing

12.22.1 Boring, providing and installing bored cast metre 1,920.43


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of

Puducherry Region
12. Foundation
Page No.: 777
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pile to be embedded in the pile cap. The


cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
450mm (Using concrete mixer)

12.23.1 Boring, providing and installing bored cast metre 5,644.94


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
750mm (Using concrete mixer)

12.24.1 Boring, providing and installing bored cast metre 9,481.83


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of

Puducherry Region
12. Foundation
Page No.: 778
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

pile to be embedded in the pile cap. The


cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
1000mm (Using concrete mixer)

12.25.1 Boring, providing and installing bored cast metre 12,567.74


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter
-1200mm (Using concrete mixer)

12.26.1 Driven cast -in -place vertical M35 grade metre 4,798.07
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 750 mm diametre (Using
concrete mixer)

12.27.1 Driven cast -in -place vertical M35 grade metre 7,992.16
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 1000 mm diametre (Using
concrete mixer)

Puducherry Region
12. Foundation
Page No.: 779
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

12.28.1 Driven cast -in -place vertical M35 grade metre 11,627.06
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 1200 mm diametre (Using
concrete mixer)

12.29.1 Driven precast vertical M 35 grade with a metre 2,641.19


minimum cement content of 419 kg / cum
R.C.C piles excluding reinforcement
complete as per drawing and technical
specifications - 500 mm diameter pile
(using crane, vibrating pile driving hammer
with power unit) including the cost of
materials, labour and transportation cost @
1% of material and machinery.

12.30.1 Driven precast vertical M 35 grade with a metre 4,620.57


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
750mm diameter pile (Using crane, vibrating
pile drawing hammer with power unit)
including the cost of materials, labour and
transportation cost @ 1% of materials and
machinery.

12.31.1 Driven precast vertical M 35 grade with a metre 7,601.15


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
1000mm diametre pile.(using crane and
vibrating pile driving hammer with power
unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.32.1 Driven precast vertical M35 grade with a metre 1,837.80


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 300mm x 300mm.(Using crane and
vibrating pile driving hammer with power
unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.33.1 Driven precast vertical M 35 grade with a metre 3,130.69


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 500 mm x 500 mm (Using crane

Puducherry Region
12. Foundation
Page No.: 780
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and vibrating pile driving hammer with


power unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.34.1 Driven precast vertical M 35 grade with a metre 5,808.03


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 750 mm x 750mm.(Using crane,
vibrating pile driving hammer with power
unit) including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.37A Pile load test on single vertical pile in MT 976.37


accordance with IS:2911 (Part -IV) -
Initial and routine load test

12.37B Pile load test on single vertical pile in MT 976.37


accordance with IS:2911 (Part -IV) -
lateral load test

12.38A.1 Cement concrete for reinforced concrete in cum 6,815.47


pile cap complete as per drawing and
technical specifications - RCC grade M20
with a minimum cement content of 341 kg /
cum (Using Concrete mixer and electric
genset) including all machineries and
formwork.

12.38A.2 Cement concrete for reinforced concrete in cum 6,091.96


pile cap complete as per drawing and
technical specifications - RCC grade M20
with a minimum cement content of 341 kg /
cum - (Using Batching plant , Transit mixer
and Concrete pump) including all
machineries and formwork.

12.38B.1 Cement concrete for reinforced concrete in cum 7,387.59


pile cap complete as per drawing and
technical specifications - RCC grade M25
with a minimum cement content of 399 kg /
cum -(Using concrete mixer) including all
machineries and formwork.

12.38B.2 Cement concrete for reinforced concrete in cum 6,664.08


pile cap complete as per drawing and
technical specifications - RCC grade M25
with a minimum cement content of 399 kg /
cum -(Using Batching plant, Transit Mixer
and Concrete Pump) including all

Puducherry Region
12. Foundation
Page No.: 781
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

machineries and formwork.

12.38C.1 Cement concrete for reinforced concrete in cum 7,459.93


pile cap complete as per drawing and
technical specifications - RCC grade M30
with a minimum cement content of 407 kg /
cum -(Using concrete mixer)including all
machineries and formwork.

12.38C.2 Cement concrete for reinforced concrete in cum 6,736.42


pile cap complete as per drawing and
technical specifications - RCC grade M30
with a minimum cement content of 407 kg /
cum -(Using Batching plant, Transit Mixer
and Concrete pump) including all
machineries and formwork.

12.38D.1 Cement concrete for reinforced concrete in cum 7,611.18


pile cap complete as per drawing and
technical specifications - RCC grade M35
with a minimum cement content of 422 kg /
cum -(Using Concrete mixer) including all
machineries and formwork.

12.38D.2 Cement concrete for reinforced concrete in cum 6,887.67


pile cap complete as per drawing and
technical specifications - RCC grade M35
with a minimum cement content of 422 kg /
cum -(Using Batching plant , Transit Mixer
and Concrete Pump) including all
machineries and formwork.

12.39 Providing and laying of PCC M15 with a cum 5,764.56


minimum cement content of 275 kg / cum
levelling course 100mm thick below the pile
cap (Using concrete mixer and electric
genset)

12.40 Supplying, fitting and placing uncoated MT 78,435.89


Thermo Mechanical Treated bars (TISCON /
VIZAG / IISCO / SAIL / JSW ) reinforcement
in foundation complete as per drawing and
technical specifications including placing
the M30 grade Athees make cover block @
60cm centre to center

12.40.1 Boring, providing and installing bored cast metre 1,966.93


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419

Puducherry Region
12. Foundation
Page No.: 782
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

kg / cum using Blue metal of 20mm and down


gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
450mm (Using concrete mixer & Cement SRPC)

12.40A Supplying, fitting and placing uncoated MT 68,184.02


Thermo Mechanical Treated bars (ISI brand
approved make) reinforcement in foundation
complete as per drawing and technical
specifications including placing the M30
grade Athees make cover block @ 60cm centre
to center

12.41 Supplying, fitting and placing uncoated MT 70,683.03


mild steel reinforcement in foundation
complete as per drawing and technical
specifications

12.41.1 Boring, providing and installing bored cast metre 5,774.01


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by

Puducherry Region
12. Foundation
Page No.: 783
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the Engineer - in - charge. The rate shall


include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
750mm (Using concrete mixer & Cement SRPC)

12.42.1 Boring, providing and installing bored cast metre 9,711.40


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
1000mm (Using concrete mixer & Cement SRPC)

12.43.1 Boring, providing and installing bored cast metre 12,898.21


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by

Puducherry Region
12. Foundation
Page No.: 784
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

the Engineer - in - charge. The rate shall


include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter
-1200mm (Using concrete mixer & Cement
SRPC)

12.44.1 Driven cast -in -place vertical M35 grade metre 4,927.80
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 750 mm diametre (Using
concrete mixer & Cement SRPC)

12.45.1 Driven cast -in -place vertical M35 grade metre 8,222.85
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 1000 mm diametre (Using
concrete mixer & Cement SRPC)

12.46.1 Driven cast -in -place vertical M35 grade metre 11,959.33
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 1200 mm diametre (Using
concrete mixer & Cement SRPC)

12.47.1 Driven precast vertical M 35 grade with a metre 2,656.05


minimum cement content of 419 kg / cum
R.C.C piles excluding reinforcement
complete as per drawing and technical
specifications - 500 mm diameter pile
(using crane, vibrating pile driving hammer
with power unit) including the cost of
materials, labour and transportation cost @
1% of material and machinery.(Using Cement
SRPC)

12.48.1 Driven precast vertical M 35 grade with a metre 4,654.00


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
750mm diameter pile (Using crane, vibrating
pile drawing hammer with power unit)
including the cost of materials, labour and
transportation cost @ 1% of materials and
machinery & Cement SRPC)

12.49.1 Driven precast vertical M 35 grade with a metre 9,283.08


minimum cement content of 419 kg / cum RCC

Puducherry Region
12. Foundation
Page No.: 785
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

piles excluding reinforcement complete as


per drawing and technical specifications -
1000mm diametre pile.(using crane and
vibrating pile driving hammer with power
unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery. (Using Cement SRPC)

12.50.1 Driven precast vertical M35 grade with a metre 1,844.61


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 300mm x 300mm.(Using crane and
vibrating pile driving hammer with power
unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery. (Using Cement SRPC)

12.51.1 Driven precast vertical M 35 grade with a metre 3,149.61


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 500 mm x 500 mm (Using crane
and vibrating pile driving hammer with
power unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery. (Using Cement SRPC)

12.52.1 Driven precast vertical M 35 grade with a metre 5,850.60


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 750 mm x 750mm.(Using crane,
vibrating pile driving hammer with power
unit) including the cost of materials,
labour and transportation cost @ 1% of
material and machinery. (Using Cement SRPC)

12.59A.1 Cement concrete for reinforced concrete in cum 6,791.39


pile cap complete as per drawing and
technical specifications - RCC grade M20
with a minimum cement content of 341 kg /
cum (Using Concrete mixer and electric
genset) including all machineries and
formwork. (Using Cement SRPC)

12.59A.2 Cement concrete for reinforced concrete in cum 6,095.70


pile cap complete as per drawing and
technical specifications - RCC grade M20
with a minimum cement content of 341 kg /
cum - (Using Batching plant , Transit mixer
and Concrete pump) including all

Puducherry Region
12. Foundation
Page No.: 786
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

machineries and formwork. (Using Cement


SRPC)

12.59B.1 Cement concrete for reinforced concrete in cum 7,381.95


pile cap complete as per drawing and
technical specifications - RCC grade M25
with a minimum cement content of 399 kg /
cum -(Using concrete mixer) including all
machineries and formwork. (Using Cement
SRPC)

12.59B.2 Cement concrete for reinforced concrete in cum 6,686.27


pile cap complete as per drawing and
technical specifications - RCC grade M25
with a minimum cement content of 399 kg /
cum -(Using Batching plant, Transit Mixer
and Concrete Pump) including all
machineries and formwork.(Using Cement
SRPC)

12.59C.1 Cement concrete for reinforced concrete in cum 7,456.62


pile cap complete as per drawing and
technical specifications - RCC grade M30
with a minimum cement content of 407 kg /
cum -(Using concrete mixer)including all
machineries and formwork. (Using Cement
SRPC)

12.59C.2 Cement concrete for reinforced concrete in cum 6,760.94


pile cap complete as per drawing and
technical specifications - RCC grade M30
with a minimum cement content of 407 kg /
cum -(Using Batching plant, Transit Mixer
and Concrete pump) including all
machineries and formwork.(Using Cement
SRPC)

12.59D.1 Cement concrete for reinforced concrete in cum 7,612.75


pile cap complete as per drawing and
technical specifications - RCC grade M35
with a minimum cement content of 422 kg /
cum -(Using Concrete mixer) including all
machineries and formwork.(Using Cement
SRPC)

12.59D.2 Cement concrete for reinforced concrete in cum 6,917.06


pile cap complete as per drawing and
technical specifications - RCC grade M35
with a minimum cement content of 422 kg /
cum -(Using Batching plant , Transit Mixer
and Concrete Pump) including all
machineries and formwork.(Using Cement

Puducherry Region
12. Foundation
Page No.: 787
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

SRPC)

12.60 Providing and laying of PCC M15 with a cum 5,956.57


minimum cement content of 275 kg / cum
levelling course 100mm thick below the pile
cap (Using concrete mixer , electric genset
and Cement SRPC)

Puducherry Region
13. Substructure
Page No.: 788
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.1 Brick masonry work in cement mortar 1:3 cum 5,872.77


(One cement and three sand) in substructure
complete excluding pointing and plastering,
as per drawing and technical specification-
including the cost of labour, material and
formwork

13.2 Pointing with cement mortar 1:3 (one cement sqm 81.38
and three sand) on brick work in
substructure as per technical
specification-including the cost of labour,
material.

13.3 Plastering with cement mortar 1:3 (one sqm 162.35


cement and three sand) on brick work in
substructure as per Technical
specifications-including the cost of labour
and material.

13.4A Stone masonry work in cement mortar 1:3 cum 5,371.14


(one cement and three sand) for
substructure complete as per drawing and
technical specifications) - Random rubble
masonry-including the cost of labour,
material and formwork.

13.4B Stone masonry work in cement mortar 1:3 cum 5,641.11


(one cement and three sand) for
substructure complete complete as per
drawing and technical specifications) -
Coursed rubble masonry (first
sort)-including the cost of labour,
material and formwork.

13.4C Stone masonry work in cement mortar 1:3 cum 7,138.14


(one cement and three sand) for
substructure complete complete as per
drawing and technical specifications) -
Ashlar masonry (first sort)-including the
cost of labour ,material and formwork.

13.5A Plain Cement Concrete in substructure cum 6,341.02


complete as per drawing and technical
specification - PCC Grade M15 with a
minimum cement content 275 kg / cum upto 5
metre height-including the cost of labour,
material, machinery and formwork.

13.5B Plaing Cement Concrete in substructure cum 7,105.76


complete as per drawing and technical
specification - PCC Grade M20 with a
minimum cement content 344 kg / cum upto 5

Puducherry Region
13. Substructure
Page No.: 789
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

metre height-including the cost of labour


,material,machinery and formwork.

13.5C.1.1 Plaing Cement Concrete in substructure cum 7,683.06


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 399 kg / cum upto 5
metre height-Using concrete
mixer(Formwork-10%).

13.5C.1.2 Plain Cement Concrete in substructure cum 6,896.23


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 400 kg / cum up to
5m height- Using batching
plant(Formwork-10%).

13.5C.2.1 Plain Cement Concrete in substructure cum 7,962.44


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 399 kg / cum - For
height above 5m height and upto 10m - Using
concrete mixer (Form work 12 % + Extra lift
2 %)

13.5C.2.2 Plain Cement Concrete in substructure cum 7,147.00


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 400 kg / cum for
height above 5m and upto 10m using batching
plant (Form work 12% + Extra lift 2%)

13.5C.3.1 Plain Cement Concrete in substructure cum 8,311.66


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 399 kg / cum for
height above 10m using concrete mixer (Form
work 15% + Extra lift 4%)

13.5C.3.2 Plain Cement Concrete in substructure cum 7,460.47


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 400 kg / cum for
height above 10m using batching plant (Form
work 15% + Extra lift 4%)

13.5D.1.1 Plain Cement Concrete in substructure cum 7,745.66


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum upto
5m height - using concrete mixer
(Formwork-10%).

Puducherry Region
13. Substructure
Page No.: 790
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.5D.1.2 Plain Cement Concrete in substructure cum 6,972.89


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum upto
5m height- Using batching plant
(Formwork-10%).

13.5D.2.1 Plain Cement Concrete in substructure cum 8,027.31


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum for
height above 5m and upto 10m using
concrete mixer (Formwork 12% + Extra lift
2%)

13.5D.2.2 Plain Cement Concrete in substructure cum 7,226.45


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum For
height above 5m and upto 10m height using
batching plant (Form work 12% + Extra lift
2%)

13.5D.3.1 Plain Cement Concrete in substructure cum 8,379.40


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum for
height above 10m -Using concrete mixer
(Form work 15% + Extra lift 4%)

13.5D.3.2 Plain Cement Concrete in substructure cum 7,543.41


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum for
height above 10m -Using batching plant
(Form work 15% + Extra lift 4%)

13.5E.1.1 Reinforced Cement Concrete in substructure cum 7,237.20


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum up to 5m
height -Using concrete mixer

13.5E.1.2 Reinforced Cement Concrete in substructure cum 6,446.02


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum up to 5m
height -Using batching plant

13.5E.2.1 Reinforced Cement Concrete in substructure cum 7,500.35


complete as per drawing and technical
specification -RCC Grade M20 with a minimum

Puducherry Region
13. Substructure
Page No.: 791
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cement content 347 kg / cum for height


above 5m and upto 10m -Using concrete
mixer (Form work 12% + Extra lift 2%)

13.5E.2.2 Reinforced Cement Concrete in substructure cum 6,680.41


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum for height
above 5m and upto 10m -Using batching
plant (Form work 12% + Extra lift 2%)

13.5E.3.1 Reinforced Cement Concrete in substructure cum 7,829.31


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum for height
above 10m - Using concrete mixer (Form
work 15% + Extra lift 4%)

13.5E.3.2 Reinforced Cement Concrete in substructure cum 6,973.43


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum for height
above 10m - Using batching plant (Form
work 15% + Extra lift 4%)

13.5F.1.1 Reinforced Cement Concrete in substructure cum 7,821.45


complete as per drawing and technical
specification -RCC Grade M25 with a
minimum cement content 403 kg / cum for
upto height 5m - Using concrete mixer

13.5F.1.2 Reinforced Cement Concrete in substructure cum 7,030.28


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 403 kg / cum for upto
height 5m - Using batching plant

13.5F.2.1 Reinforced Cement Concrete in substructure cum 8,077.42


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 403 kg / cum for height
above 5m and upto 10m height - Using
concrete mixer (Form work 11.8% + Extra
lift 1.8%)

13.5F.2.2 Reinforced Cement Concrete in substructure cum 7,260.34


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 403 kg / cum for height
above 5m and upto 10m height - Using
batching plant (Form work 11.8% + Extra
lift 1.8)

Puducherry Region
13. Substructure
Page No.: 792
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

13.5F.3.1 Reinforced Cement Concrete in substructure cum 8,379.40


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 405 kg / cum for height
above 10m - Using concrete mixer (Form
work 15% + Extra lift 4%)

13.5F.3.2 Reinforced Cement Concrete in substructure cum 7,605.48


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 403 kg / cum for height
above 10m - Using batching plant (Form
work 15% + Extra lift 4%)

13.5G.1.1 Reinforced Cement Concrete in substructure cum 7,856.23


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum upto 5m height
- Using concrete mixer (Formwork-10%)

13.5G.1.2 Reinforced Cement Concrete in substructure cum 7,066.79


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum upto 5m
height - Using batching plant
(Formwork-10%).

13.5G.2.1 Reinforced Cement Concrete in substructure cum 8,077.64


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum for height
above 5m and upto 10m height - Using
concrete mixer (Form work 11.5% + Extra
lift 1.6%)

13.5G.2.2 Reinforced Cement Concrete in substructure cum 8,077.64


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum for height
above 5m and upto 10m height - Using
batching plant (Form work 11.5% + Extra
lift 1.6 %)

13.5G.3.1 Reinforced Cement Concrete in substructure cum 8,391.88


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum for height
above 10m - Using concrete mixer (Form
work 14% + Extra lift 3.5%)

13.5G.3.2 Reinforced Cement Concrete in substructure cum 7,548.62


complete as per drawing and technical

Puducherry Region
13. Substructure
Page No.: 793
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

specification -RCC Grade M30 with a minimum


cement content 407 kg / cum for height
above 10m - Using batching plant (Form
work 14% + Extra lift 3.5%)

13.5H.1.1 Reinforced Cement Concrete in substructure cum 8,016.21


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
upto 5m - Using concrete mixer
(Formwork-10%).

13.5H.1.2 Reinforced Cement Concrete in substructure cum 7,226.78


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
upto 5m - Using batching plant
(Formwork-10%).

13.5H.2.1 Reinforced Cement Concrete in substructure cum 8,191.11


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 5m and upto 10m - Using concrete
mixer (Form work 11% + Extra lift 1.4%)

13.5H.2.2 Reinforced Cement Concrete in substructure cum 7,384.45


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 5m and upto 10m - Using batching
plant (Form work 11% + Extra lift 1.4%)

13.5H.3.1 Reinforced Cement Concrete in substructure cum 8,453.46


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 10m - Using concrete mixer (Form
work 13% + Extra lift 3%)

13.5H.3.2 Reinforced Cement Concrete in substructure cum 7,620.96


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 10m - Using batching plant (Form
work 13% + Extra lift 3%)

13.6 Supplying, fitting and placing Thermo tonne 77,833.61


Mechanical Treated bars (TISCON / VIZAG /
IISCO / SAIL) reinforcement in substructure
complete as per drawing and technical
specifications including material and

Puducherry Region
13. Substructure
Page No.: 794
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

labour for cutting, bending, shifting to


site, tying and placing in position.

13.6A Supplying, fitting and placing Thermo MT 67,581.73


Mechanical Treated bars (ISI brand
approved make). reinforcement in
substructure complete as per drawing and
technical specifications including material
and labour for cutting, bending, shifting
to site, tying and placing in position.

13.7 Supplying, fitting and placing mild steel tonne 69,775.36


reinforcement complete in substructure as
per drawing and technical specifications
including material and labour for
straightening, cutting,bending, shifting to
site,tying and placing in position.

13.8 Providing weep holes in brick masonry nos 118.98


/plain/reinforced concrete abutment, wing
wall / return wall with 100 mm dia AC pipe,
extending through the full width of the
structure with slope of 1V:20H towards
drawing foce. Complete as per drawing and
technical specifications.

13.9 Providing weep holes in brick masonry / metre 316.39


plain / reinforced concrete abutment , wing
wall / return wall with 110 mm dia PVC
pipe, 6kg/sq.cm extending through the full
width of the structure with slope of 1V:20H
towards drawing foce.Complete as per
drawing and technical specifications

13.10 Providing and laying of filter media with cum 1,705.63


granular materials / stone crushed
aggregates satisfying the requirements laid
down Clause 2504.2.2. of MoRT&H
specifications to a thickness of not less
than 600 mm with smaller size towards the
soil and bigger size towards the wall and
provided over the entire surface behind
abutment, wing wall and return wall to the
full height compacted to a firm condition
complete as per drawing and technical
specifications.

Puducherry Region
14. Superstructure
Page No.: 795
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

14.1A.1 Furnishing and placing reinforced cement cum 7,482.03


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using concrete mixer - for solid
slab superstructure - height upto 5m
including all machineries and formwork etc.

14.1A.1.1 Furnishing and placing reinforced cement cum 7,793.78


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer - for T-beam &
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1A.2 Furnishing and placing reinforced cement cum 7,793.78


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer -for solid slab
superstructure - for height above 5m upto
10m-including all machineries and formwork
etc.

14.1A.2.1 Furnishing and placing reinforced cement cum 8,105.53


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure -for height above 5m
upto 10m-including all machineries and
formwork etc.

14.1A.3 Furnishing and placing reinforced cement cum 8,105.53


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using concrete mixer -for solid slab
superstructure - for height above
10m-including all machineries and formwork
etc.

14.1A.3.1 Furnishing and placing reinforced cement cum 8,417.29


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure -for height above
10m-including all machineries and formwork
etc.

Puducherry Region
14. Superstructure
Page No.: 796
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

14.1B.1 Furnishing and placing reinforced cement cum 8,142.17


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer - for solid
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1B.1.1 Furnishing and placing reinforced cement cum 8,481.43


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer and electric
gen set - for T-beam & slab superstructure
- height upto 5m including all machineries
and formwork, etc.

14.1B.2 Furnishing and placing reinforced cement cum 8,481.43


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer -for solid slab
superstructure - height above 5m and upto
10m including all machineries and formwork,
etc.

14.1B.2.1 Furnishing and placing reinforced cement cum 8,820.68


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure - height above 5m and
upto 10m- including all machineries and
formwork, etc.,

14.1B.3 Furnishing and placing reinforced cement cum 8,820.68


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer -for solid slab
superstructure - height above10m-
including all machineries and
formwork,etc.,

14.1B.3.1 Furnishing and placing reinforced cement cum 9,159.94


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure - height above 10m-
including all machineries and formwork,

Puducherry Region
14. Superstructure
Page No.: 797
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

etc.,

14.1C.1 Furnishing and placing reinforced cement cum 8,262.81


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer - for solid
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1C.1.1 Furnishing and placing reinforced cement cum 8,607.10


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer - forT-beam &
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1C.2 Furnishing and placing reinforced cement cum 8,607.10


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -for solid
slab superstructure - height above 5m to
10m-including all machineries and formwork,
etc.,

14.1C.2.1 Furnishing and placing reinforced cement cum 8,951.38


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -forT-beam &
slab superstructure - height above 5m to
10m-including all machineries and
formwork,etc.,

14.1C.3 Furnishing and placing reinforced cement cum 8,951.38


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -for solid
slab superstructure - height above
10m-including all machineries and
formwork,etc.,

14.1C.3.1 Furnishing and placing reinforced cement cum 9,295.67


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -forT-beam &

Puducherry Region
14. Superstructure
Page No.: 798
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

slab superstructure - height


above10m-including all machineries and
formwork,etc.,

14.1D.1.1 Furnishing and placing reinforced cement cum 8,296.71


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer - for solid slab superstructure -
height upto 5m including all machineries
and formwork, etc.

14.1D.1.2 Furnishing and placing reinforced cement cum 8,648.27


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for T-beam & slab superstructure -
height upto 5m-including all machineries
and formwork,etc.,

14.1D.1.3 Furnishing and placing reinforced cement cum 9,702.93


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for box girder and balanced
cantilever - height upto 5m-including all
machineries and formwork,etc.,

14.1D.2.1 Furnishing and placing reinforced cement cum 8,648.27


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for solid slab superstructure -
height above 5m and upto 10m-including all
machineries and formwork,etc.,

14.1D.2.2 Furnishing and placing reinforced cement cum 8,999.82


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for T-beam & slab superstructure -
height above 5m to 10m-including all
machineries and formwork,etc.,

14.1D.2.3 Furnishing and placing reinforced cement cum 10,406.04


concrete in superstructure as per drawing
and technical specifications - RCC grade

Puducherry Region
14. Superstructure
Page No.: 799
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

M35 / PSC grade M35 with a minimum cement


content 422 kg / cum - Using concrete
mixer -for box girder and balanced
cantilever - height above 5m and upto
10m-including all machineries and
formwork,etc.,

14.1D.3.1 Furnishing and placing reinforced cement cum 8,999.82


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for solid slab superstructure -
height above 10m-including all machineries
and formwork,etc.,

14.1D.3.2 Furnishing and placing reinforced cement cum 9,351.38


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for T-beam & slab superstructure -
height above 10m-including all machineries
and formwork,etc.,

14.1D.3.3 Furnishing and placing reinforced cement cum 11,109.15


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for box girder and balanced
cantilever - height above10m-including all
machineries and formwork,etc.,

14.1E.1.1 Furnishing and placing reinforced cement cum 8,839.74


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer - for solid
slab superstructure- height upto 5m
including all machineries and formwork,
etc.

14.1E.1.2 Furnishing and placing reinforced cement cum 9,208.06


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure- height upto
5m-including all machineries and
formwork,etc.,

Puducherry Region
14. Superstructure
Page No.: 800
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

14.1E.2.1 Furnishing and placing reinforced cement cum 9,208.06


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for solid
slab superstructure- height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.1E.2.2 Furnishing and placing reinforced cement cum 9,576.39


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure- height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.1E.3.1 Furnishing and placing reinforced cement cum 9,576.39


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for solid
slab superstructure- height above
10m-including all machineries and
formwork,etc.,

14.1E.3.2 Furnishing and placing reinforced cement cum 9,944.71


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure- height above
10m-including all machineries and
formwork,etc.,

14.1F.1.1 Furnishing and placing reinforced cement cum 8,362.04


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height upto 5m- including
all machineries and formwork, etc.,

14.1F.1.2 Furnishing and placing reinforced cement cum 8,722.47


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
including launching of precast girders by

Puducherry Region
14. Superstructure
Page No.: 801
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

launching truss upto 40m span - height upto


5m-including all machineries and formwork,
etc.,

14.1F.1.3 Furnishing and placing reinforced cement cum 9,803.77


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height upto
5m-including all machineries and formwork,
etc.,

14.1F.2.1 Furnishing and placing reinforced cement cum 8,722.47


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height above 5m and upto
10m-including all machineries and formwork,
etc.,

14.1F.2.2 Furnishing and placing reinforced cement cum 9,082.91


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant,transit mixer
and concrete pump -for I - beam and slab
including launching of precast girders by
launching truss upto 40m span - height
above 5m and upto 10m-including all
machineries and formwork, etc.,

14.1F.2.3 Furnishing and placing reinforced cement cum 10,524.64


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above 5m and
upto 10m-including all machineries and
formwork, etc.,

14.1F.3.1 Furnishing and placing reinforced cement cum 8,958.23


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer

Puducherry Region
14. Superstructure
Page No.: 802
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and concrete pump -for solid slab


superstructure - height above 10m-including
all machineries and formwork, etc.,

14.1F.3.2 Furnishing and placing reinforced cement cum 9,443.34


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
including launching of precast girders by
launching truss upto 40m span - height
above 10m-including all machineries and
formwork, etc.,

14.1F.3.3 Furnishing and placing reinforced cement cum 11,245.50


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant,transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above
10m-including all machineries and formwork,
etc.,

14.1G.1.1 Furnishing and placing reinforced cement cum 10,067.80


concrete in superstructure as per drawing
and technical specifications - PSC grade
M50 with a minimum cement content 490 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height upto
5m-including all machineries and formwork,
etc.,

14.1G.2.1 Furnishing and placing reinforced cement cum 10,813.56


concrete in superstructure as per drawing
and technical specifications - PSC grade
M50 with a minimum cement content 490 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above 5m to
10m-including all machineries and formwork,
etc.,

14.1G.3.1 Furnishing and placing reinforced cement cum 11,559.32


concrete in superstructure as per drawing
and technical specifications - PSC grade
M50 with a minimum cement content 490 kg /

Puducherry Region
14. Superstructure
Page No.: 803
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

cum - Using batching plant, transit mixer


and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above
10m-including all machineries and formwork,
etc.,

14.1H.1.1 Furnishing and placing reinforced cement cum 10,594.38


concrete in superstructure as per drawing
and technical specifications - PSC grade
M55 with a minimum cement content 529 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height upto 5
m-including all machineries and formwork,
etc.,

14.1H.2.1 Furnishing and placing reinforced cement cum 11,352.22


concrete in superstructure as per drawing
and technical specifications - PSC grade
M55 with a minimum cement content 529 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above 5m to
10m- including all machineries and
formwork, etc.,

14.1H.3.1 Furnishing and placing reinforced cement cum 12,163.92


concrete in superstructure as per drawing
and technical specifications - PSC grade
M55 with a minimum cement content 529 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above
10m-including all machineries and formwork,
etc.,

14.2 Supplying, fitting and placing Thermo tonne 79,239.58


Mechanical Treated bars (TISCON / VIZAG /
IISCO / SAIL / JSW) reinforcement in
superstructure complete as per drawing and
technical specifications-including labour
for cutting,bending,tying and placing in
position.

14.2A Supplying, fitting and placing Thermo tonne 68,987.70


Mechanical Treated bars (ISI brand approved
make) reinforcement in superstructure
complete as per drawing and technical

Puducherry Region
14. Superstructure
Page No.: 804
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

specifications-including labour for


cutting,bending,tying and placing in
position.

14.2A.1 Furnishing and placing reinforced cement cum 6,961.46


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant, transit mixer
and concrete pump-for solid slab
superstructure -for height upto 5m-
including all mahineries and formwork,etc.,

14.2A.1.1 Furnishing and placing reinforced cement cum 7,251.52


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant, transit mixer
and concrete pump-for T-beam & slab
superstructure -for height upto
5m-including all machineries and formwork.

14.2A.2 Furnishing and placing reinforced cement cum 7,251.52


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant , transit mixer
and concrete pump-for solid slab
superstructure -for height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.2A.2.1 Furnishing and placing reinforced cement cum 7,541.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using batching plant, transit mixer
and concrete pump-for T-beam & slab
superstructure -for height above 5m and
upto 10m-including all machineries and
formwork, etc.,

14.2A.3 Furnishing and placing reinforced cement cum 7,541.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure -for height above 10m

14.2A.3.1 Furnishing and placing reinforced cement cum 7,831.64


concrete in superstructure as per drawing

Puducherry Region
14. Superstructure
Page No.: 805
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and technical specifications - RCC grade


M20 with a minimum cement content 341kg /
cum - Using batching plant , transit mixer
and concrete pump-for T-beam & slab
superstructure -for height above
10m-including all machineries and formwork
etc.,

14.2B.1 Furnishing and placing reinforced cement cum 7,631.75


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant,transit mixer
an concrete pump -for solid slab
superstructure - height upto 5m- including
all machineries and formwork, etc.,

14.2B.1.1 Furnishing and placing reinforced cement cum 7,949.74


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height upto 5m- including
all machineries and formwork,etc.,

14.2B.2 Furnishing and placing reinforced cement cum 7,949.74


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump-for solid slab
superstructure - height above 5m and upto
10m-including all machineries and formwork,
etc.,

14.2B.2.1 Furnishing and placing reinforced cement cum 8,267.73


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 5m and upto
10m-including all machineries and
formwork,etc.,

14.2B.3 Furnishing and placing reinforced cement cum 8,267.73


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab

Puducherry Region
14. Superstructure
Page No.: 806
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

superstructure - height above 10m-


including all machineries and
formwork,etc.,

14.2B.3.1 Furnishing and placing reinforced cement cum 8,303.27


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 10m
-including all machineries and formwork,
etc.,

14.2C.1 Furnishing and placing reinforced cement cum 7,723.10


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height upto 5m- including
all machineries and formwork, etc.,

14.2C.1.1 Furnishing and placing reinforced cement cum 8,044.89


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant -for T-beam &
slab superstructure - height upto 5m

14.2C.2 Furnishing and placing reinforced cement cum 8,044.89


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant,transit mixer
and concrete pump -for solid slab
superstructure - height above 5m to
10m-including all machineries and formwork,
etc.,

14.2C.2.1 Furnishing and placing reinforced cement cum 8,366.69


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 5m and upto
10m-including all machineries and
formwork,etc.,

14.2C.3 Furnishing and placing reinforced cement cum 8,366.69


concrete in superstructure as per drawing

Puducherry Region
14. Superstructure
Page No.: 807
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

and technical specifications - RCC grade


M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height above
10m-including all machineries and formwork,
etc.,

14.2C.3.1 Furnishing and placing reinforced cement cum 8,688.48


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 10m-
including all machineries and formwork,
etc.,

14.2D.1.1 Furnishing and placing reinforced cement cum 7,756.55


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump -
for solid slab superstructure - height upto
5m-including all machineries and
formwork,etc.,

14.2D.1.2 Furnishing and placing reinforced cement cum 8,085.22


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump
-for T-beam & slab superstructure - height
upto 5m-including all machineries and
formwork,etc.,

14.2D.1.3 Furnishing and placing reinforced cement cum 9,071.22


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump
-for box girder and balanced cantilever-
height upto 5m-including all machineries
and formwork,etc.,

14.2D.2.1 Furnishing and placing reinforced cement cum 8,085.22


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement

Puducherry Region
14. Superstructure
Page No.: 808
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

content 422 kg / cum - Using batching


plant, transit mixer and concrete pump -
for solid slab superstructure - height
above 5m to 10m-including all machineries
and formwork,etc.,

14.2D.2.2 Furnishing and placing reinforced cement cum 8,413.89


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant,transit mixer and concrete pump -for
T-beam & slab superstructure - height above
5m and upto 10m-including all machineries
and formwork,etc.,

14.2D.2.3 Furnishing and placing reinforced cement cum 9,728.56


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump -for
box girder and balanced cantilever- height
above 5m and upto 10m-including all
machineries and formwork,etc.,

14.2D.3.1 Furnishing and placing reinforced cement cum 8,413.89


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump,
etc., - for solid slab superstructure -
height above 10m-including all machineries
and formwork,etc.,

14.2D.3.2 Furnishing and placing reinforced cement cum 8,742.55


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump
-for T-beam & slab superstructure - height
above 10m- including all machineries and
formwork,etc.,

14.2D.3.3 Furnishing and placing reinforced cement cum 10,385.89


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump

Puducherry Region
14. Superstructure
Page No.: 809
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

-for box girder and balanced cantilever-


height above 10m-including all machineries
and formwork,etc.,

14.2E.1.1 Furnishing and placing reinforced cement cum 8,094.91


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure- height upto 5m-including
all machineries and formwork,etc.,

14.2E.1.2 Furnishing and placing reinforced cement cum 8,437.91


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
superstructure including launching of
precast girders by launching truss upto
40m span- height upto 5m-including all
machineries and formwork,etc.,

14.2E.1.3 Furnishing and placing reinforced cement cum 9,466.93


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in-situ box
girder, segmental construction and
balanced cantilever - height upto 5m-
including all machineries and formwork,
etc.,

14.2E.2.1 Furnishing and placing reinforced cement cum 8,218.44


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant,transit mixer
and concrete pump -for solid slab
superstructure- height above 5m and upto
10m- including all machineries and
formwork, etc.,

14.2E.2.2 Furnishing and placing reinforced cement cum 8,780.92


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
superstructure including launching of

Puducherry Region
14. Superstructure
Page No.: 810
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

precast girders by launching truss upto


40m span- height above 5m and upto 10m-
including all machineries and
formwork,etc.,

14.2E.2.3 Furnishing and placing reinforced cement cum 10,152.94


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in-situ box
girder, segmental construction and
balanced cantilever - height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.2E.3.1 Furnishing and placing reinforced cement cum 8,780.92


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant -for solid
slab superstructure- height above 10m

14.2E.3.2 Furnishing and placing reinforced cement cum 9,123.92


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
superstructure including launching of
precast girders by launching truss upto
40m span- height above 10m- including all
machineries and formwork,etc.,

14.2E.3.3 Furnishing and placing reinforced cement cum 10,838.94


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in-situ box
girder, segmental construction and
balanced cantilever - height above 10m-
including all machineries and
formwork,etc.,

14.4 Providing and laying cement concrete cum 12,848.55


wearing coat M30 grade with a minimum
cement content 405 kg / cum including
reinforcement complete as per drawing and
technical specification

14.6 Construction of precast RCC railing of M30 Rmt 2,012.15

Puducherry Region
14. Superstructure
Page No.: 811
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

grade with a minimum cement content 407 kg


/ cum , aggregate size not exceeding 12mm,
true to line and grade, tolerance of
vertical RCC post not to exceed I in 500,
centre to centre spacing between vertical
post not to exceed 2000 mm, leaving
adequate space between vertical post for
expansion, complete as per approved
drawings and technical specifications

14.7 Construction of RCC railing of M30 grade Rmt 2,253.60


with a minimum cement content 407 kg / cum
cast- in-situ with 20mm nominal size
aggregate, true to line and grade,
tolerance of vertical RCC post not to
exceed 1 in 500, centre to centre spacing
between vertical post not to exceed 2000mm,
leaving adequate space between vertical
post for expansion, complete as per
approved drawings and technical
specifications

14.9 Drainage spouts complete as per drawing and each 1,574.84


Technical Specifications. (Including 5
percent cost of material and labour for
electrodes,cutting gas , sealant,
anticorrosive bituminous paint, mild steel
grating etc.)

14.10 PCC M15 with a minimum cement content 275 cum 5,525.69
kg / cum grade levelling course below
approch slab complete as per drawing and
technical specifications

14.11A Reinforced cement concrete M30 grade with cum 11,326.09


a minimum cement content 407 kg / cum
approach slab including reinforcement and
formwork complete as per drawing and
technical specifications - Using concrete
mixer

14.11B Reinforced cement concrete M30 grade with cum 10,594.06


a minimum cement content 407 kg / cum
approach slab including reinforcement and
formwork complete as per drawing and
technical specifications - Using batching
plant, transit mixer and concrete pump.

14.16 Providing and applying 2 coats of water sqm 252.40


based cement paint to unplastered concrete
surface after cleaning the surface of dirt,
dust, oil, grease, efflorescence and

Puducherry Region
14. Superstructure
Page No.: 812
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

applying paint @ of 1 litre for 2 sqm.

14.18.1 Providing and fixing 2mm thick corrugated Rmt 1,442.55


copper plate in expansion joint complete as
per drawing and technical specifications

14.18.2 Providing and fixing 20mm thick Rmt 84.01


compressible fibre board in expansion joint
complete as per drawing and technical
specifications

14.18.3 Providing and fixing in position 20mm thick Rmt 24.41


premoulded joint filler in expansion joint
for fixed ends of simply supported spans
not exceeding 10m to cater for a horizontal
movement upto 20mm, covered with sealant
complete as per drawing and technical
specifications

14.18.4 Providing and filling joint sealing Rmt 29.94


compound as per drawings and technical
specification with coarse sand and 6
percent bitumen by weight

Puducherry Region
15. River Training and Protection Works
Page No.: 813
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

15.1 Providing and laying boulders apron on cum 1,828.19


river bed for protection against scour with
stone boulders weighing not less than 40 kg
each complete as per drawing and technical
specifications- Boulder laid dry without
wire crates.

15.2 Providing and laying of boulder apron laid cum 2,890.12


in wire crates made with 4 mm dia GI wire
conforming to IS:280 & IS 4826 in 100 mm x
100 mm mesh (weaved diagonally) including
10 percent extra for laps and joints laid
with stone boulders weighing not less than
40 kg each-Boulder apron laid in wire
crates.

15.3 Providing and laying of apron with cement cum 5,879.84


concrete blocks of size 0.5x0.5x0.5 m
cast-in-situ and made with nominal mix of
M15 grade cement concrete with a minimum
cement content of 250kg/cum as per
IRC:21-2000 (add 2 percent of cost to
account for excavation for preparation of
bed,nominal surface reinforcement and
filling of granular material in recesses
between blocks)

15.4A Providing and laying pitching on slopes cum 1,828.19


laid over prepared filter media including
boulder apron laid dry in front of toe of
embankment complete as per drawing and
technical specifications - stone

15.4B Providing and laying pitching on slopes cum 5,879.84


laid over prepared filter media including
boulder apron laid dry in front of toe of
embankment complete as per drawing and
technical specifications - Cement concrete
blocks of size 0.3 x 0.3 x 0.3 m cast in
cement concrete of grade M15 (add 2 percent
of cost to account for excavation for
preparation of bed,nominal surface
reinforcement and filling of granular
material in recesses between blocks)

15.5 Providing and laying filter material cum 1,904.26


underneath pitching in slopes complete as
per drawing and technical specifications

15.9 Construction of dry rubble flooring at cum 2,328.68


cross drainage works for relatively less
important works ( including triming and

Puducherry Region
15. River Training and Protection Works
Page No.: 814
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

preparation of base)

15.10A Curtain wall complete as per drawing and cum 5,509.27


technical specifications - Stone masonry in
cement mortar 1:3

15.10B Curtain wall complete as per drawing and cum 5,764.54


technical specifications - cement concrete
grade M15

15.11 Flexible apron: Construction of flexible cum 1,886.34


apron 1m thick comprising of loose stone
boulders weighing not less than 40kg beyond
curtain wall (including trimming and
preparation of bed)

15.12 Providing and construction of a gabian cum 2,974.10


structure for retaining earth with segments
of wire crates of size 7 m x 3 m x 0.6 m
each divided into 1.5m compartments by
cross netting, made from 4mm galvanised
steel wire @ 32 kg per 10 sqm having
minimum tensile strength of 300 Mpa
conforming to IS :280 and galvanizing
coating conforming to IS:4826, woven into
mesh with double twist, mesh size not
exceeding 100x100mm, filled with boulders
with least dimension of 200mm, all loose
ends to be tied with 4mm galvanised steel
wire

15.13 Providing and construction gabian cum 4,867.01


structures for erosion control, river
training works and protection works with
wire crates of size 2m x 1mx 0.3m each
divided into 1m compartments by cross
netting, made from 4 mm galvanised steel
wire @ 32 kg per 10 sqm having minimum
tensile strength of 300Mpa conforming to
IS:280 and galvanizing coating conforming
to IS:4826, woven into mesh with double
twist, mesh size not exceeding 100mm x
100mm, filled with boulders with least
dimension of 200mm , all loose ends to be
securely tied with 4mm galvanised steel
wire.

Puducherry Region
16. Repair and Rehabilitation
Page No.: 815
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

16.1 Removal of existing cement concrete wearing sqm 119.93


coat including its disposal complete as per
technical specification without causing any
detrimental effect to any part of the
bridge structure and removal of dismantled
material with all lifts and lead upto 1000m

16.2 Removal of existing asphaltic wearing coat sqm 90.47


comprising of 50 mm thick asphaltic
concrete laid over 12mm thick mastic
asphalt including disposal with all lift
and lead upto 1000m

16.5A Sealing of cracks / porous concrete by kg 136.53


injection process through nipples/ grouting
complete as per technical specifications-
Cement grout

16.5B Sealing of cracks / porous concrete by kg 168.60


injection process through nipples /
grouting complete as per technical
specifications - cement mortar (1:1)
grouting

16.7 Sealing of crack / porous concrete with sqm 66.10


epoxy grout by injection through nipples
complete as per clause 2803.1.

16.9 Removal of defective concrete , cleaning sqm 327.89


the surface thoroughly, applying the
shotcrete mixture mechanically with
compressed air under pressure, comprising
of cement, sand, coarse aggregates, water
and quick setting compound in the
proportion as per clause 2807.1, sand and
coarse aggregates conforming to IS: 383 and
Table 1 of IS: 9012 respectively, water
cement ratio ranging from 0.35 to 0.50,
density of gunite not less than 2000 kg /
cum, strength not less than 25 Mpa and
workmanship conforming to clause 2807.6.

16.11 Epoxy bonding of new concrete to old sqm 551.05


concrete

16.17 Replacement of expansion joints complete as Rmt 2,752.12


per drawings

16.18 Replacement of damaged concrete railing Rmt 281.19

16.19 Replacement of crash barrier Rmt 513.57

Puducherry Region
16. Repair and Rehabilitation
Page No.: 816
----------------------------------------------------------------------------------
Code No. Description Unit Rate in Rs.
----------------------------------------------------------------------------------

16.20 Replacement of damaged mild steel railing Rmt 234.72

16.21 Repair of concrete crash barrier with Rmt 257.72


cement concrete of M30 grade by cutting and
trimming the damaged portion to a regular
shape, cleaning the area to be repaired
thorougly, applying cement concrete after
erection of proper formwork

16.22 Repair of RCC railing (Carrying out repair Rmt 181.53


of RCC railing to bring it to the original
shape)

Puducherry Region
CEMENT
CONSUMPTION
STATEMENT
4. Concrete Work
Page No.: 817
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

4.1.1 Providing and laying in position cement cum 610.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:1:2 (1 cement:1coarse
sand : 2 graded stone aggregate 20mm
nominal size)

4.1.2 Providing and laying in position cement cum 400.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:11/2:3 (1 cement:1 1/2
coarse sand : 3 graded stone aggregate 20mm
nominal size)

4.1.3 Providing and laying in position cement cum 320.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2:4 (1 cement:2coarse
sand : 4 graded stone aggregate 20mm
nominal size)

4.1.4 Providing and laying in position cement cum 320.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2:4 (1 cement :2coarse
sand : 4 graded stone aggregate 40mm
nominal size)

4.1.5 Providing and laying in position cement cum 220.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:3:6 (1 cement:3coarse
sand : 6 graded stone aggregate 20mm
nominal size)

4.1.6 Providing and laying in position cement cum 220.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:3:6 (1 cement:3coarse
sand : 6 graded stone aggregate 40mm
nominal size)

4.1.7 Providing and laying in position cement cum 220.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:3:6 (1 cement:3 fine
sand : 6 graded stone aggregate 40mm
nominal size)

4.1.8 Providing and laying in position cement cum 170.00


concrete of specified grade excluding the

Puducherry Region
4. Concrete Work
Page No.: 818
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cost of centering and shuttering.- All work


upto plinth level -1:4:8 (1 cement:4coarse
sand : 8 graded stone aggregate 40mm
nominal size)

4.1.9 Providing and laying in position cement cum 170.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:4:8 (1 cement:4 fine
sand : 8 graded stone aggregate 40mm
nominal size)

4.1.10 Providing and laying in position cement cum 130.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:5:10 (1 cement:5coarse
sand : 10 graded stone aggregate 40mm
nominal size)

4.1.10A Providing and laying in position cement cum 130.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:5:10 (1 cement:5coarse
sand : 10 graded stone aggregate 12.5mm
nominal size)

4.1.11 Providing and laying in position cement cum 130.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:5:10 (1 cement: 5 fine
sand : 10 graded stone aggregate 40mm
nominal size)

4.1.12 Providing and laying in position cement cum 170.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2 : 3 1/2 :9 (1
ordinary portland cement :2 Fly ash : 3 1/2
coarse sand : 9 graded stone aggregate
40mm nominal size)

4.1.13 Providing and laying in position cement cum 130.00


concrete of specified grade excluding the
cost of centering and shuttering.- All work
upto plinth level -1:2 1/2 :4:11 (1
ordinary portland cement : 2 1/2 Fly ash :
4 coarse sand : 11 graded stone aggregate
40mm nominal size)

4.2.1 Providing and laying cement concrete in cum 610.00


retaining walls , return walls (any

Puducherry Region
4. Concrete Work
Page No.: 819
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

thickness) including attached pilasters,


columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:1:2 (1 cement : 1 coarse sand :
2 graded stone aggregate 20mm nominal size)

4.2.2 Providing and laying cement concrete in cum 400.00


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1: 1 1/2 :3 (1 cement : 1 1/2
coarse sand : 3 graded stone aggregate 20mm
nominal size)

4.2.3 Providing and laying cement concrete in cum 320.00


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)

4.2.4 Providing and laying cement concrete in cum 320.00


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 40mm nominal size)

4.2.5 Providing and laying cement concrete in cum 220.00


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,

Puducherry Region
4. Concrete Work
Page No.: 820
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

struts, buttresses, string or lacing


courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 20mm nominal size)

4.2.6 Providing and laying cement concrete in cum 220.00


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:3:6 (1 cement : 3 coarse sand :
6 graded stone aggregate 40mm nominal size)

4.2.7 Providing and laying cement concrete in cum 220.00


retaining walls , return walls (any
thickness) including attached pilasters,
columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing
courses, parapets, coping bed blocks ,
anchor blocks, plain window sills, fillets
etc upto floor five level, excluding the
cost of centring,shuttering and
finishing:1:3:6 (1 cement : 3 fine sand : 6
graded stone aggregate 40mm nominal size)

4.4.1 Providing and laying cement concrete in cum 320.00


kerbs, steps and the like at or near ground
level excluding the cost of centring,
shuttering and finishing.1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.4.2 Providing and laying cement concrete in cum 220.00


kerbs, steps and the like at or near ground
level excluding the cost of centring,
shuttering and finishing. 1:3:6 (1 Cement :
3 coarse sand : 6 graded stone aggregate 20
mm nominal size).

4.5.1 Providing and fixing upto floor five level cum 385.83
precast cement concrete string or lacing
courses, copings, bed plates, anchor
blocks, plain windows sills, shelves,
louvers, steps, stair cases etc., including

Puducherry Region
4. Concrete Work
Page No.: 821
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

hoisting and setting in position with


cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) -
1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size).

4.5.2 Providing and fixing upto floor five level cum 285.83
precast cement concrete string or lacing
courses, copings, bed plates, anchor
blocks, plain windows sills, shelves,
louvers, steps, stair cases etc., including
hoisting and setting in position with
cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surface complete. - 1:3:6 (1
cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size).

4.6.1 Providing and fixing at or near ground Cum 366.31


level precast cement concrete in kerbs,
edgings etc., as per approved pattern and
setting in position with cement mortar 1:3
(1 cement : 3 coarse sand) including the
cost of required centring, shuttering and
finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surface complete. - 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.7.1 Providing and fixing upto floor five level Cum 403.54
precast cement concrete solid block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete. 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.7.2 Providing and fixing upto floor five level Cum 303.54
precast cement concrete solid block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement

Puducherry Region
4. Concrete Work
Page No.: 822
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

plaster 1:3 (1 cement : 3 fine sand) on


exposed surfaces complete. 1:3:6 (1 cement
: 3 coarse sand : 6 graded stone aggregate
20mm nominal size).

4.8.1 Providing and fixing upto floor five level Cum 247.84
precast cement concrete hollow block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete: 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size).

4.8.2 Providing and fixing upto floor five level Cum 201.84
precast cement concrete hollow block
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3 coarse
sand) cost of required centring, shuttering
and finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete. 1:3:6 (1 cement
: 3 coarse sand : 6 graded stone aggregate
20mm nominal size).

4.9 Precasting and placing in position 125mm Each 9.75


dia Bollards 600mm high of required shape
including providing M.S. pipe sleeve 50mm
dia 300mm long in the Bollard and M.S.
pipes 40mm dia and 450mm long with
150x150x6mm M.S. plate welded at bottom and
embedded 150mm cement concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size) including
necessary excavation of size 250x250x450mm
deep for the same in bitumen/concrete
pavement at specified spacing.

4.10 Providing and laying damp - proof course sqm 12.80


40mm thick with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size)

4.11 Providing and laying damp - proof course sqm 16.00


50mm thick with cement concrete 1:2:4 (1
cement : 2 coarse sand :4 graded stone
aggregate 20mm nominal size).

4.17 Making plinth protection 50mm thick of sqm 11.00

Puducherry Region
4. Concrete Work
Page No.: 823
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cement concrete 1:3:6 (1 cement : 3 coarse


sand : 6 graded stone aggregate 20mm
nominal size) over 75mm bed of dry brick
ballast 40mm nominal size well rammed and
consolidated and grouted with fine sand
including finishing the top smooth.

Puducherry Region
5. Reinforced Concrete Work
Page No.: 824
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

5.1.1 Providing and laying in position specified cum 610.00


grade of reinforced cement concrete
excluding the cost of
centering,shuttering,finishing and
reinforcement -All work upto plinth level :
1:1:2 (1 cement : 1 coarse sand : 2 graded
stone aggregate 20mm nominal size)

5.1.2 Providing and laying in position specified cum 400.00


grade of reinforced cement concrete
excluding the cost of
centering,shuttering,finishing and
reinforcement -All work upto plinth level :
1:1.5:3 (1 cement : 1 .5 coarse sand : 3
graded stone aggregate 20mm nominal size)

5.1.3 Providing and laying in position specified cum 320.00


grade of reinforced cement concrete
excluding the cost of centering,
shuttering, finishing and reinforcement
-All work upto plinth level : 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size)

5.2.1 Reinforced cement concrete work in walls cum 610.00


(any thickness), including attached
pilasters , buttresses, plinth and string
courses , fillets, columns , pillars,
piers, abutments, posts and struts etc.upto
floor five level excluding cost of
centering, shuttering,finishing and
reinforcement:1:1:2 (1 cement : 1 coarse
sand : 2 graded stone aggregate 20mm
nominal size)

5.2.2 Reinforced cement concrete work in walls cum 400.00


(any thickness), including attached
pilasters , buttresses, plinth and string
courses , fillets, columns , pillars,
piers, abutments, posts and struts etc.upto
floor five level excluding cost of
centering, shuttering,finishing and
reinforcement:1:1.5:3 (1 cement : 1.5coarse
sand : 3 graded stone aggregate 20mm
nominal size)

5.2.3 Reinforced cement concrete work in walls cum 320.00


(any thickness), including attached
pilasters , buttresses, plinth and string
courses , fillets, columns , pillars,
piers, abutments, posts and struts etc.upto

Puducherry Region
5. Reinforced Concrete Work
Page No.: 825
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

floor five level excluding cost of


centering, shuttering,finishing and
reinforcement:1:2:4(1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm
nominal size)

5.3 Reinforced cement concrete work in beams , cum 320.00


suspended floors, roofs having slope upto
15 degree landings, balconies, shelves,
chajjas, lintels, bands, plain window
sills, staircases and spiral stair cases
upto floor five level excluding the cost of
centering, shuttering,finishing and
reinforcement with 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm
nominal size).

5.4 Providing and laying upto floor five level cum 320.00
reinforced cement concrete in kerbs, steps
and the like excluding the cost of
centering, shuttering , finishing and
reinforcement with 1:2:4 (1 cement :2
coarse sand :4 graded stone aggregate 20mm
nominal size)

5.5 Reinforced cement concrete work in arches, cum 320.00


arch ribs , domes , vaults, shells , folded
plate and roofs having slope more than 15
degree upto floor five level excluding the
cost of centering, shuttering, finishing
and reinforcement with 1:2:4 (1 cement :2
coarse sand: 4 graded stone aggregate 20mm
nominal size)

5.6 Reinforced cement concrete work in cum 320.00


chimneys, shafts, upto floor five level
excluding the cost of centering,
shuttering, finishing and reinforcement
with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size)

5.7 Reinforced cement concrete work in well cum 320.00


-steining excluding the cost of centring,
shuttering, finishing and reinforcement
with 1:2:4 (1 cement :2 coarse sand : 4
graded stone aggregate 20mm nominal size)

5.8 Reinforced cement concrete work in vertical cum 400.00


and horizontal fins individually or forming
box louvers, facias and eaves boards upto
floor five level excluding the cost of

Puducherry Region
5. Reinforced Concrete Work
Page No.: 826
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

centring, shuttering, finishing and


reinforcement with 1:1.5:3 (1 cement :1.5
coarse sand :3 graded stone aggregate 20mm
nominal size)

5.12 Providing ,hoisting and fixing upto floor cum 385.83


five level precast reinforced cement
concrete work in string courses, bands ,
copings, bed plates, anchor blocks, plain
window sills and the like including the
cost of required centring, shuttering,
finishing smooth with 6 mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete but excluding
cost of reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size)

5.13 Providing , hoisting and fixing upto floor cum 320.00


five level precast reinforced cement
concrete in small lintels not exceeding
1.5m clear span upto floor five level
including the cost of required centring,
shuttering and finishing smooth with 6mm
thick cement plaster 1:3 (1 cement : 3 fine
sand) on exposed surfaces but excluding the
cost of reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal -size)

5.14 Providing, hoisting and fixing upto floor cum 320.00


five level precast reinforced cement
concrete in mouldings as in cornices,
windows sills etc. including setting in
cement mortar 1:3 (1 cement :3 coarse sand)
cost of required centring, shuttering and
finishing smooth with 6 mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on
exposed surfaces complete but excluding the
cost of reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate
20mm nominal size)

5.15 Providing , hoisting and fixing upto floor cum 348.93


five level precast reinforced cement
concrete in lintels , beams and bressumers
including setting in cement mortar 1:3 (1
cement : 3 coarse sand) , cost of required
centring and shuttering and finishing
smooth with 6mm thick cement plaster 1:3 (1
cement : 3 fine sand) on exposed surfaces

Puducherry Region
5. Reinforced Concrete Work
Page No.: 827
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

but excluding the cost of reinforcement


with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size)

5.16 Providing , hoisting and fixing upto floor cum 435.43


five level precast reinforced cement
concrete in shelves including setting in
cement mortar 1:3 (1 cement : 3 coarse
sand) , cost of required centring ,
shuttering and finishing with neat cement
punning on exposed surfaces but excluding
the cost of reinforcement with 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size).

5.17 Providing , hoisting and fixing upto floor cum 473.00


five level precast reinforced cement
concrete in vertical & horizontal fins
individually or forming box louvers setting
in cement mortar 1:2 (1 cement : 2 coarse
sand) including the cost of required
centring , shuttering and finishing smooth
with 6mm thick cement plaster 1:3 (1 cement
: 3 fine sand) on exposed surfaces complete
but excluding the cost of reinforcement
with 1:2:4 (1 cement :2 coarse sand : 4
graded stone aggregate 20 mm nominal size)

5.19 Encasing rolled steel sections, in beams cum 320.00


and columns, with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5 mm nominal size) including
centring and shuttering complete but
excluding cost of reinforcement.

5.20 Encasing rolled steel section in grillages cum 320.00


with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5
mm nominal size) including centring and
shuttering but excluding cost of expanded
metal and hangers.

5.23 Deduct for omitting in R.C.C. work smooth sqm 3.67


finishing of the exposed surface with 6mm
thick cement mortar 1:3 (1 cement : 3 fine
sand)

5.24 Extra for rendering smooth the top of sqm 4.17


suspended floors , landings and staircases
(treads and risers) with cement mortar 1:2
(1 cement : 2 coarse sand) including a

Puducherry Region
5. Reinforced Concrete Work
Page No.: 828
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

floating coat of neat cement and protecting


the surface with a layer of 7.5 cm of earth
laid over 15 mm of fine sand in case of
suspended floor and bricks laid in mud
mortar in case of landings and steps
including subsequent removal and cleaning
of the same

5.27 Providing and filling in position bitumen cm depth p 0.03


mix filler of proportion 80kg of hot er cm widt
bitumen , 1 kg of cement and 0.25 cubic h per 100m
metre of coarse sand for expansion joints length

5.33 Providing and laying in position machine cum 410.00


batched , machine mixed and machine
vibrated design mix cement concrete of
specified grade for reinforced cement
concrete work including pumping of concrete
to site of laying but excluding the cost
of centring , shuttering , finishing and
reinforcement , including admixtures in
recommended proportions as per IS 9103 to
accelerate , retard setting of concrete ,
improve workability without impairing
strength and durability . M-25 grade
reinforced cement concrete by using 410 kg
of cement per cum of concrete - All work
upto floor V level.

5.34.1 Add or deduct for providing richer or cum 10.00


leaner mixes respectively at all floor
levels - Providing M-30 grade concrete by
using 420 kg of cement per cum of concrete
instead of M-25 grade B.M.C / RMC.

5.34.2 Add or deduct for providing richer or cum 18.00


leaner mixes respectively at all floor
levels - Providing M-35 grade concrete by
using 428 kg of cement per cum of concrete
instead of M-25 grade B.M.C / RMC.

5.34.3 Add or deduct for providing richer or cum 25.00


leaner mixes respectively at all floor
levels - Providing M-30 grade concrete by
using 435 kg of cement per cum of concrete
instead of M-25 grade B.M.C / RMC.

5.35 Deduct for using less cement than the quintal 100.00
quantity as provided in the item of batch
mix concrete / RMC as arrived as per mix
design.

Puducherry Region
5. Reinforced Concrete Work
Page No.: 829
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

5.37 Providing and laying in position ready cum 410.00


mixed concrete manufactured in fully
automatic batching plant and transported to
site of work in transit mixer for a lead
upto 10kms having continuous agitated
mixer, manufactured as per mix design of
specified grade for reinforced cement
concrete work including pumping of RMC from
transit mixer to site of laying, excluding
the cost of centering, shuttering,
finishing and reinforcement including cost
of admixtures in recommended proportions as
per IS: 9103 to accelerate/ retard setting
of concrete, improve workability without
impairing strength and durability M-25
grade Reinforced cement concrete by using
410kg of cement per cum of concrete. All
works upto floor V level.

Puducherry Region
6. Brick Work
Page No.: 830
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

6.1.1 Brick work with FPS bricks of class cum 95.00


designation 35 in foundation and plinth in
cement mortar 1:4 (1 cement : 4 coarse
sand)

6.1.2 Brick work with FPS bricks of class cum 62.50


designation 35 in foundation and plinth in
cement mortar 1:6 (1 cement : 6 coarse
sand)

6.2.1 Brick work with modular bricks of class cum 83.60


designation 35 in foundation and plinth in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.2.2 Brick work with modular bricks of class cum 55.00


designation 35 in foundation and plinth in
cement mortar 1:6 (1 cement: 6 coarse sand)

6.3.1 Brick work with machine moulded perforated cum 62.50


bricks of class designation 35 conforming
to IS:2222-1991 in superstructure above
plinth level upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse sand)
with FPS bricks.

6.3.2 Brick work with machine moulded perforated cum 55.00


bricks of class designation 35 conforming
to IS:2222-1991 in superstructure above
plinth level upto floor five level in
cement mortar 1:6 (1 cement : 6 coarse
sand) with modular bricks.

6.4.1 Brick work with FPS bricks of class cum 95.00


designation 35 in superstructure above
plinth level upto floor V level in all
shapes and sizes in cement mortar 1:4 (1
cement: 4 coarse sand)

6.4.2 Brick work with FPS bricks of class cum 62.50


designation 35 in superstructure above
plinth level upto floor V level in all
shapes and sizes in cement mortar 1:6 (1
cement : 6 coarse sand)

6.7 Providing half brick masonry with FPS metre 3.85


bricks of class designation 35 in cement
mortar 1:3 (1 cement : 3 coarse sand) in
superstructure for closing cavity 5 to
7.5cm wide in cavity wall complete with 10
cm / 11.4 cm wide bitumen felt type 3
grade 1.

Puducherry Region
6. Brick Work
Page No.: 831
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

6.8 Brick work 7 cm thick with FPS brick of sqm 9.23


class designation 35 in cement mortar 1:3
(1 cement : 3 coarse sand) in
superstructure.

6.9 Brick work in plain arches in cum 127.50


superstructure including centring and
shuttering complete for span upto 6 metres
with FPS bricks of class designation 35 in
cement mortar 1:3 (1 cement : 3 coarse
sand)

6.10 Brick work in gauged arches in cum 127.50


superstructure in cement mortar 1:3 (1
cement :3 coarse sand) including centring
and shuttering complete for span upto 6
metres with FPS bricks of class designation
35

6.12.1 Half brick masonry with FPS bricks of class sqm 14.28
designation 35 in foundation and plinth in
cement mortar 1:3 (1 cement : 3 coarse
sand)

6.12.2 Half brick masonry with FPS bricks of class sqm 10.64
designation 35 in foundation and plinth in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.13.1 Half brick masonry with FPS bricks of class sqm 14.28
designation 35 in superstructure above
plinth level upto floor V level in cement
mortar 1:3 (1 cement: 3 coarse sand)

6.13.2 Half brick masonry with FPS bricks of class sqm 10.64
designation 35 in superstructure above
plinth level upto floor V level in cement
mortar 1:4 (1 cement: 4 coarse sand)

6.16.1 Tile brick masonry with tile bricks of cum 152.00


class designation 35 in foundation and
plinth in cement mortar 1:4 (1 cement : 4
coarse sand).

6.16.2 Tile brick masonry with tile bricks of cum 100.00


class designation 35 in foundation and
plinth in cement mortar 1:6 (1 cement : 6
coarse sand)

6.17 Tile brick masonry with machine moulded cum 100.00


tile bricks of class designation 35
conforming to IS: 2690(Part I)-1993 in

Puducherry Region
6. Brick Work
Page No.: 832
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

foundation and plinth in cement mortar 1:6


(1 cement: 6 coarse sand)

6.18 Tile brick masonry with tile brick of class cum 100.00
designation 35 in superstructure above
plinth level upto floor V level in cement
mortar 1:6 (1 cement: 6 coarse sand)

6.20 Tile brick masonry with tile bricks of cum 133.00


class designation 35 in plain arch work in
superstructure in cement mortar 1:4 (1
cement : 4 coarse sand) including centering
and shuttering complete.

6.21 Tile brick masonry with tile bricks of cum 133.00


class designation 35 in gauged arch work in
superstructure in cement mortar 1:4 (1
cement: 4 coarse sand) including centring
and shuttering complete.

6.22 Tile brick masonry work 5 cm thick with sqm 7.65


tile bricks of class designation 35 in
cement mortar in 1:3 (1 cement: 3 coarse
sand) in superstructure.

6.23 Honey comb brick work 10/11.4 cm thick with sqm 6.55
bricks of class designation 35 in cement
mortar in 1:4 (1 cement :4 coarse sand)

6.26 Brick work with selected FPS bricks of cum 62.50


class designation 35 in exposed brick work
including making horizontal and vertical
grooves 10mm wide 12mm deep complete from
ground level upto plinth level in cement
mortar 1:6 (1 cement: 6 coarse sand)

6.27 Brick work with modular bricks of class cum 55.00


designation 35 in exposed brick work
including making horizontal and vertical
grooves 10 mm wide 12mm deep complete from
ground level upto plinth level in cement
mortar 1:6 (1 cement: 6 coarse sand)

6.28 Brick work with machine moulded modular cum 55.00


bricks of class designation 35 in exposed
brick work including making horizontal and
vertical grooves 10mm wide 12mm deep
complete from ground level upto plinth
level in cement mortar 1:6 (1 cement : 6
coarse sand).

Puducherry Region
6. Brick Work
Page No.: 833
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

6.29 Brick work with machine moulded FPS bricks cum 62.50
of class designation 35 in exposed brick
work including making horizontal and
vertical grooves 10mm wide 12mm deep
complete from ground level upto plinth
level in cement mortar 1:6 (1 cement: 6
coarse sand).

6.30 Brick work with machine moulded perforated cum 62.50


FPS bricks of class designation 35
conforming IS:2222-1991 in exposed brick
work including making horizontal and
vertical grooves 10mm wide 12mm deep
complete from ground level upto plinth
level in cement mortar 1:6 (1 cement : 6
coarse sand)

6.31 Brick work with machine moulded perforated cum 55.00


modular bricks of class designation 35
conforming to IS:2222-1991 in exposed brick
work including making horizontal and
vertical grooves 10mm wide 12mm deep
complete from ground level upto plinth
level in cement mortar 1:6 (1 cement : 6
coarse sand).

6.32.1 Brick work with clay fly-ash FPS brick of cum 95.00
class designation 35 in superstructure
above plinth level upto floor five level in
cement mortar 1:4 (1 cement : 4 coarse
sand).

6.32.2 Brick work with clay flyash FPS brick of cum 62.50
class designation 35 in superstructure
above plinth level upto floor five level in
cement mortar 1:6 (1 cement: 6 coarse
sand).

6.34.1 Brick work with modular fly ash lime bricks cum 83.60
(FALG Bricks) conforming to IS: 12894-2002,
class designation 100 average compressive
strength in superstructure above plinth
level upto floor V level in cement mortar
1:4 (1 cement: 4 coarse sand)

6.34.2 Brick work with modular fly ash lime bricks cum 55.00
(FALG Bricks) conforming to IS: 12894-2002,
class designation 100 average compressive
strength in superstructure above plinth
level upto floor V level in cement mortar
1:6 (1 cement: 6 coarse sand)

Puducherry Region
6. Brick Work
Page No.: 834
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

6.35.1 Brick work with modular calcium silicate cum 83.60


bricks machine moulded conforming to IS:
4139-1989,class designation 100 average
compressive strength in superstructure
above plinth level upto floor five level in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.35.2 Brick work with modular calcium silicate cum 55.00


bricks machine moulded conforming to
IS:4139-1989, class designation 100 average
compressive strength in superstructure
above plinth level upto floor V level in
cement mortar 1:6 (I cement : 6 coarse
sand)

6.36.1 Brick work with modular extruded burnt cum 83.60


flyash clay sewer bricks (Conforming to
IS:4885-1988) in foundation and plinth in
cement mortar 1:4 (1 cement: 4 coarse sand)

6.37 Brick work with modular extruded burnt fly cum 127.50
ash clay sewer bricks (Conforming to
IS:4885-1988) in arches, in foundation and
plinth in cement mortar 1:3 (1 cement: 3
fine sand)

6.38 Providing and laying autoclaved aerated cum 57.00


cement blocks masonry with 100mm thick AAC
blocks in super structure above plinth
level upto floor V level in cement mortar
1:4 (1 cement: 4 coarse sand) The rate
includes providing and placing in position
2 Nos. 6 mm dia M.S. bars at every third
course of masonry work.

6.42.1 Brick work with mechanised autoclaved cum 95.00


flyash lime bricks conforming to IS: 12894:
2002 of class designation 100 in
superstructure above plinth level upto
floor V level in cement mortar 1:4 (1
cement: 4 coarse sand).

6.42.2 Brick work with mechanised autoclaved cum 62.50


flyash lime bricks conforming to IS:
12894:2002 of class designation 100 in
superstructure above plinth level upto
floor V level in cement mortar 1:6(I
cement: 6 coarse sand)

6.44 Brick edging 7 cm wide 11.4 cm deep to metre 0.13


plinth protection with bricks of class

Puducherry Region
6. Brick Work
Page No.: 835
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

designation 35 including grouting with


cement mortar 1:4 (1 cement: 4 fine sand).

6.50.1 Stabilised Mud Blocks work with stabilished cum 95.00


Mud Blocks of size 24cm x 11.5cm x 9cm
(manufactured in the ratio of 1:19 (one
cement : 19 red earth) with compressive
strength of not less than 35kg / sq.cm) in
foundation and plinth - in cement mortar
1:4 (1 cement :4 sand)

6.50.2 Stabilised Mud Blocks work with stabilished cum 62.50


Mud Blocks of size 24cm x 11.5cm x 9cm
(manufactured in the ratio of 1:19 (one
cement : 19 red earth) with compressive
strength of not less than 35kg / sq.cm) in
foundation and plinth - in cement mortar
1:6 (1 cement :6 sand)

6.50.3 Half Stabilished Mud blocks work with sqm 10.64


Stabilished Mud blocks of size 24cm x
11.5cm x 9cm (manufactured in the ratio of
1:19 (one cement : 19 red earth) with
compressive strength of not less than 35kg
/ sq.cm) in foundation and plinth - in
cement mortar 1:4 (1 cement :4 sand)

Puducherry Region
7. Stone Work
Page No.: 836
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

7.1.1 Random rubble masonry with hard stone in cum 82.50


foundation and plinth including levelling
up with cement concrete 1:6:12 (1 cement :
6 coarse sand: 12 graded stone aggregate
20mm nominal size) at plinth level with
cement mortar1:6 (1 cement: 6 coarse sand).

7.6.1 Coursed rubble masonry (first sort) with cum 75.00


hard stone in foundation and plinth with
cement mortar 1:6 (1 cement : 6 coarse
sand).

7.7.1 Coursed rubble masonry (second sort) with cum 75.00


hard stone in foundation and plinth with
cement mortar 1:6 (1 cement : 6 coarse
sand).

7.23.1.1 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade (to be secured to the backing by
means of cramps which shall be paid for
separately) Red sand stone - exposed face
fine dressed with rough backing 70mm thick.

7.23.1.2 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
fine dressed with rough backing - 60mm
thick.

7.23.1.3 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for

Puducherry Region
7. Stone Work
Page No.: 837
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

separately) : Red sand stone - exposed face


fine dressed with rough backing - 50mm
thick.

7.23.1.4 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
fine dressed with rough backing - 40mm
thick.

7.23.1.5 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
fine dressed with rough backing - 30mm
thick.

7.23.2.1 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 70mm thick.

7.23.2.2 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by

Puducherry Region
7. Stone Work
Page No.: 838
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

means of cramps which shall be paid for


separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 60mm thick.

7.23.2.3 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 50mm thick.

7.23.2.4 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 40mm thick.

7.23.2.5 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : Red sand stone - exposed face
machine cut and table rubbed with rough
backing - 30mm thick.

7.23.3.1 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone

Puducherry Region
7. Stone Work
Page No.: 839
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

shade : (To be secured to the backing by


means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 70mm
thick.

7.23.3.2 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 60mm
thick.

7.23.3.3 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 50mm
thick.

7.23.3.4 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 40mm
thick.

7.23.3.5 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an

Puducherry Region
7. Stone Work
Page No.: 840
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

admixture of pigment matching the stone


shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face fine dressed with rough backing - 30mm
thick.

7.23.4.1 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 70mm thick.

7.23.4.2 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 60mm thick.

7.23.4.3 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 50mm thick.

7.23.4.4 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1

Puducherry Region
7. Stone Work
Page No.: 841
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

white cement : 2 stone dust) with an


admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 40 mm thick.

7.23.4.5 Stone work (machine cut edges) for wall sqm 9.18
lining etc. (veneer work) backing filled
with a grout of 12mm thick cement mortar
1:3 (1 cement: 3 coarse sand) including
pointing in white cement mortar 1:2 (1
white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing by
means of cramps which shall be paid for
separately) : White sand stone - exposed
face machine cut and table rubbed with
rough backing - 30mm thick.

7.25 Providing and fixing stainless steel cramps kg 7.01


of required size and shape for anchoring
stone wall lining to the backing or
securing adjacent stones in stone wall
lining in cement mortar 1:2 (1 cement: 2
coarse sand) including making the necessary
chases in stone and holes in walls wherever
required.

7.26 Providing and fixing stone dowels 10x5x2.50 each 0.68


cm cut to double wedge shape as per design
in cement mortar 1:2 (1 cement: 2 coarse
sand) including making the necessary
chases.

7.27 Providing and fixing copper pins 7.5cm long each 0.68
6 mm diameter for securing adjacent stones
in stone wall lining in cement mortar 1:2
(1 cement: 2 coarse sand) including making
the necessary chases.

7.28.1.1 Providing and fixing sloping chajja of sqm 3.62


stone 40mm thick and upto 80cm wide beyond
the wall as measured along the slope in
cement mortar 1:4 (1 cement : 4 coarse
sand) with 12mm diameter anchoring steel
bar 45cm long fixed in each stone and
supported on and including with bricks cove
of class designation 75 in cement mortar
1:4 (1 cement: 4 coarse sand) including

Puducherry Region
7. Stone Work
Page No.: 842
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

pointing in cement mortar 1:2 (1 white


cement : 2 stone dust) with an admixture of
pigment matching the stone shade - Red sand
stone with FPS bricks.

7.28.2.1 Providing and fixing sloping chajja of sqm 3.62


stone 40mm thick and upto 80cm wide beyond
the wall as measured along the slope in
cement mortar 1:4 (1 cement : 4 coarse
sand) with 12mm diameter anchoring steel
bar 45cm long fixed in each stone and
supported on and including with bricks cove
of class designation 75 in cement mortar
1:4 (1 cement: 4 coarse sand) including
pointing in cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment matching the stone shade - White
sand stone with FPS bricks.

7.36 Wall lining butch work upto 10.00 m height sqm 18.14
with Dholpur stone 40mm thick rough facing
on the exposed surface with stone strips of
minimum length 300mm and required width
including embedding every 10th layer and
bottom most layer in masonry or concrete
after making necessary chases of size 75 x
75 mm and by providing layer of 75mm thick
strips i/c 12mm thick bed of cement mortar
1:3 (1 cement: 3 coarse sand) i/c ruled
pointing in cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of
pigment to match the shade of stone
complete.

7.37.1.1 Stone work (machine cut edges) for wall sqm 7.34
lining upto 10m height etc. (Veneer work)
backing filled with a grout of 12mm thick
cement mortar 1:3 (1 cement: 3 coarse sand)
and jointed with cement mortar 1:2 (1
cement : 2 stone dust) including rubbing
and polishing complete. (To be secured to
the backing by means of cramps which shall
be paid for separately) - Kota staone slabs
exposed face dressed and rubbed 25mm thick.

7.38.1.1 Stone tile work for wall lining upto 10m sqm 10.44
height with special adhesive over 12mm
thick bed of cement mortar 1:3 (1 cement: 3
coarse sand) including pointing in white
cement with an admixture of pigment to
match the stone shade 8mm thick (Mirror

Puducherry Region
7. Stone Work
Page No.: 843
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

polished and machine cut edge) - Granite


stone of any colour and shade.

7.38.1.2 Stone tile work for wall lining upto 10 m sqm 10.44
height with special adhesive over 12mm
thick bed of cement mortar 1:3 (1 cement: 3
coarse sand) including pointing in white
cement with an admixture of pigment to
match the stone shade. 8mm thick - (mirror
polished and machine cut edge) - Raj Nagar
plain white marble/Udaipur green
marble/Zebra black marble.

7.41 Providing and fixing structural steel frame kg 0.19


(for dry cladding with 30 mm thick gang saw
cut with machine cut edges sand stone) on
walls at all heights using M.S.
square/rectangular tube in the required
pattern as per architectural drawing
including cost of cutting, bending, welding
etc. The frame work shall be supported in
wall with the help of MS brackets/ lugs of
angle iron/flats etc. which shall be welded
to the frame and embedded in brick wall
with cement concrete block 1:2:4 (1 cement
:2 coarse sand: 4 graded stone aggregate
20mm nominal size) of size 300x230x300mm
including cost of necessary centring and
shuttering and with approved expansion hold
fasteners on CC/RCC surface including
drilling necessary holes. Approved cramps/
pins etc. shall be welded to the frame work
to support stone cladding the steel work
will be given a priming coat of "ZINC"
primer and painted with two or more coats
of epoxy paint (Shop drawings shall be
submitted by the contractor to the
Engineer-in-Charge for approval before
execution). The frame work shall be fixed
in true horizontal & vertical lines/planes.
(Only structural steel frame work shall be
measured for the purpose of payment,
stainless steel cramps shall be paid for
separately and nothing extra shall be
paid.)

Puducherry Region
8. Marble Work
Page No.: 844
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

8.1.1.1 Marble work gang saw cut (polished and sqm 8.16
machine cut) of thickness 18 mm for wall
lining (veneer work) in cement mortar 1:3
(1 cement: 3 coarse sand) including
pointing with white cement mortar 1:2 (1
white cement : 2 marble dust) with an
admixture of pigment to match the marble
shade: (To be secured to the backing by
means of cramps, which shall be paid for
separately) - Raj Nagar plain white marble/
Udaipur green marble/ Zebra black marble -
Area of slab upto 0.50 sqm.

8.1.1.2 Marble work gang saw cut (polished and sqm 9.04
machine cut) of thickness 18 mm for wall
lining (veneer work) in cement mortar 1:3
(1 cement: 3 coarse sand) including
pointing with white cement mortar 1:2 (1
white cement : 2 marble dust) with an
admixture of pigment to match the marble
shade: (To be secured to the backing by
means of cramps,which shall be paid for
separately) - Raj Nagar plain white marble/
Udaipur green marble/ Zebra black marble -
Area of slab over 0.50 sqm.

8.2.1.1 Providing and fixing 18mm thick gang saw sqm 9.12
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Raj Nagar
plain white marble / Udaipur green marble /
Zebra black marble - Area of slab upto 0.5
sqm

8.2.1.2 Providing and fixing 18mm thick gang saw sqm 9.12
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints

Puducherry Region
8. Marble Work
Page No.: 845
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

treated with white cement, mixed with


matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Raj Nagar
plain white marble / Udaipur green marble /
Zebra black marble - Area of slab over 0.5
sqm

8.2.2.1 Providing and fixing 18mm thick gang saw sqm 9.12
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Granite of
any colour and shade - Area of slab upto
0.5 sqm

8.2.2.2 Providing and fixing 18mm thick gang saw sqm 5.13
cut mirror polished (premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4
(1 cement: 4 coarse sand) with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
etc. complete at all levels. - Granite of
any colour and shade - Area of slab over
0.50 sqm

8.4 Extra for fixing marble / granite stone metre 1.26


over and above corresponding basic item in
facias and drops of width upto 150 mm with
epoxy resin based adhesive including
cleaning etc. complete.

8.7.1 Providing and fixing cramps of required kg 6.35


size and shape in RCC / CC backing with
cement mortar 1:2 (1 cement: 2 coarse sand)
including drilling necessary holes in

Puducherry Region
8. Marble Work
Page No.: 846
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

stones and embedding the cramp in the hole


(fastener to be paid separately) - Gunmetal
cramps.

8.7.2 Providing and fixing cramps of required kg 7.01


size and shape in RCC / CC backing with
cement mortar 1:2 (1 cement: 2 coarse sand)
including drilling necessary hole in stones
and embedding the cramp in the hole
(fastener to be paid separately) -
Stainless steel cramps.

8.9.1.1 Stone tile (polished) work for wall lining sqm 10.44
over 12mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand) and cement slurry @
3.3kg/sqm including pointing in white
cement complete. - 8mm thick Raj Nagar
plain white marble/Udaipur green
marble/Zebra black marble.

8.9.1.2 Stone tile (polished) work for wall lining sqm 10.44
over 12mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand) and cement slurry @
3.3kg/sqm including pointing in white
cement complete. - 8mm thick - Granite of
any colour and shade.

Puducherry Region
9. Wood Work
Page No.: 847
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

9.32B Providing 50x50x50 mm Burma teak wood plugs nos 0.01


including cutting brick work and fixing in
cement mortar 1:3 (1 cement : 3 fine sand)
and making good the walls etc.

9.32P Providing 50x50x50 mm Padak wood plugs nos 0.01


including cutting brick work and fixing in
cement mortar 1:3 (1 cement : 3 fine sand)
and making good the walls etc.

9.32V Providing 50x50x50 mm Vengai wood plugs nos 0.01


including cutting brick work and fixing in
cement mortar 1:3 (1 cement : 3 fine sand)
and making good the walls etc.

9.34.1B Providing and fixing Burma teakwood plain sqm 0.05


lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
40mm thick

9.34.2B Providing and fixing Burma teakwood plain sqm 0.05


lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
25mm thick

9.34.3B Providing and fixing Burma teak wood plain sqm 0.05
lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
20mm thick

9.34.4B Providing and fixing Burma teak wood plain sqm 0.05
lining tongued and grooved on and including
wooden plugs complete with necessary screws
and priming coat on unexposed surface -
12mm thick

9.37.1 Providing and fixing decorative plywood 4mm sqm 0.05


thick one side decorative veneer conforming
to IS : 1328 (type -1) for plain lining /
cladding with necessary screws , priming
coat on unexposed surface with : decorative
veneer facings of approved manufacture.

9.38 Providing and fixing 4mm thick coir veneer sqm 0.05
board , ISI marked IS : 14842 plain lining
with necessary screws , priming coat on
unexposed surface etc., complete

Puducherry Region
9. Wood Work
Page No.: 848
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

9.46.1 Providing and fixing curtain rods of 1.25 metre 0.01


mm thick chromium plated brass plate, with
two chromium plated brass brackets fixed
with C.P. brass screws and wooden plugs
,etc., wherever necessary complete: - 12mm
dia

9.46.2 Providing and fixing curtain rods of 1.25 metre 0.01


mm thick chromium plated brass plate, with
two chromium plated brass brackets fixed
with C.P.brass screws and wooden plugs,
etc., wherever necessary complete: - 20mm
dia

9.46.3 Providing and fixing curtain rods of 1.25 metre 0.01


mm thick chromium plated brass plate, with
two chromium plated brass brackets fixed
with C.P.brass screws and wooden plugs,
etc., wherever necessary complete: - 25mm
dia

9.53 Providing 40x5 mm flat iron hold fast 40cm each 1.10
long including fixing to frame with 10mm
diameter bolts, nuts and wooden plugs and
embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 20mm
nominal size)

Puducherry Region
10. Steel Work
Page No.: 849
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

10.10 Fixing standard steel glazed doors, windows Kg 0.13


and ventilators in walls with 15X3mm lugs
10cm long embedded in cement concrete
blocks 15X10X10cm of 1:3:6 (1cement : 3
Coarse sand : 6 graded stone aggregate 20mm
nominal size) or with wooden plugs and
screws or rawl plugs and screws or with
fixing clips or with bolts and nuts as
required, including fixing of float glass
panes with glazing clips and special
metal-sash putty of approved make or metal
beading with screws (only steel windows
with lugs, glass panes cut to size and
glazing clips or metal beading with screws,
shall be supplied by department free of
cost).

10.11 Providing and fixing factory made ISI Kg 0.13


marked steel glazed doors , windows and
ventilators side/top/centre hung with
beading and all members such as K11B and
K12B etc. complete of standard rolled steel
sections, joints mitred and flash butt
welded and sash bars tenoned and rivetted
with 15X3mm lugs, 10cm long embeded in
cement concrete blocks 15X10X10cm of 1:3:6
(1 cement : 3 coarse sand :6 graded stone
aggregate 20mm nominal size) or with wooden
plugs and screws or rawl plugs and screws
or with fixing clips or with bolts and nuts
as required, including providing and fixing
of hinges, pivots,float glass panes with
glazing clips and special metal sash putty
of approved make and a priming coat of
approved steel primer excluding the cost of
metal beading and other fittings except
necessary hinges or pivots complete as per
approved design.

10.13 Providing and fixing T-iron frames for Kg 0.11


doors, windows and ventilators or mild
steel Tee-sections, joints mitred and
welded with 15X3mm lugs, 10cm long embeded
in cement concrete blocks
15X10X10cm of 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate
20mm nominal size) or with wooden
plugs and screws or with dash fastener or
rawl plugs and screws or with fixing clips
or with bolts and nuts as required
including fixing of necessary butt hinges

Puducherry Region
10. Steel Work
Page No.: 850
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

and screws and applying a priming coat of


approved steel primer.

10.15 Providing and fixing M.S. tubular frames Kg 0.27


for doors, windows,ventilators and cupboard
with L-type sections made of 1.60mm thick
M.S.sheet, joints mitred and welded and
grinded finish, with profiles of required
size with 15X3mm lugs 10cm long embeded in
cement concrete blocks 15X10X10cm of 1:3:6
(1cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size) or with wooden
plugs and screws or rawl plugs and screws
or with fixing clips or bolts and nuts as
required including fixing of necessary butt
hinges and screws and applying a priming
coat of approved steel primers.

Puducherry Region
11. Flooring
Page No.: 851
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

11.1.1 Brick on edge flooring with bricks of class Sqm. 18.49


designation 75 including cement slurry etc.
complete in cement mortar with F.P.S.
bricks. C.M. 1:4 (1 cement : 4 coarse sand)

11.1.2 Brick on edge flooring with bricks of class Sqm 12.85


designation 75 including cement slurry etc.
complete in cement mortar with F.P.S.
bricks. C.M. 1:6 (1 cement : 6 coarse sand)

11.3.1 Cement concrete flooring 1:2:4 (1 cement :2 Sqm 17.00


coarse sand : 4 graded stone aggregate)
finished with a floating coat of neat
cement including cement slurry, but
excluding the cost of nosing of steps etc.
complete. 40mm thick with 20mm nominal size
stone aggregate.

11.4 52mm thick cement concrete flooring with Sqm 23.10


concrete hardener topping under layer 40mm
thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate of
20mm nominal size) and top layer 12mm
thick cement hardener consisting of mix 1:2
(1 cement hardener mix : 2 graded stone
aggregate 6mm nominal size) by volume.
Hardening compound is mixed @ 2 litres per
50kg of cement or as per manufacturers
specifications. This includes cost of
cement slurry, but excluding the cost of
nosing of steps etc. complete.

11.5 62mm thick cement concrete flooring with Sqm 26.30


concrete hardener topping under layer 50mm
thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm
nominal size) and top layer 12mm thick
cement hardener consisting of mix 1:2 (1
cement hardener mix : 2 graded stone
aggregate 6mm nominal size) by volume.
Hardening compound is mixed @ 2 litre per
50kg of cement or as per manufactures
specifications. This includes cost of
cement slurry but excluding the cost of
nosing of steps etc. complete.

11.6 Cement plaster skirting (upto 30cm height) Sqm 13.98


with cement mortar 1:3 (1 cement : 3 coarse
sand) finished with a floating coat of neat
cement. 18mm thick

Puducherry Region
11. Flooring
Page No.: 852
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

11.7 Cement concrete pavement with 1:2:4 (1 Cum 320.00


cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) including
finishing complete.

11.9.1 40mm thick marble chips flooring, rubbed Sqm 16.95


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Dark shade
pigment with ordinary cement.

11.9.2 40mm thick marble chips flooring, rubbed Sqm 12.90


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Light shade
pigment with white cement.

11.9.3 40mm thick marble chips flooring, rubbed Sqm 14.92


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Medium shade
pigment with 50% white cement and 50%
ordinary cement.

Puducherry Region
11. Flooring
Page No.: 853
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

11.9.4 40mm thick marble chips flooring, rubbed Sqm 12.90


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. White cement
without any pigement.

11.9.5 40mm thick marble chips flooring, rubbed Sqm 16.95


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. Light shade
pigment with ordinary cement.

11.9.6 40mm thick marble chips flooring, rubbed Sqm 16.95


and polished to granolithic finish, under
layer 34mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume including
cement slurry etc. complete. ordinary
cement without any pigment.

11.10.1 40mm thick marble chips flooring, rubbed Sqm 17.83


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,

Puducherry Region
11. Flooring
Page No.: 854
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

chocolate, grey, yellow or green marble


chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Dark shade pigment
with ordinary cement.

11.10.2 40mm thick marble chips flooring, rubbed Sqm 12.05


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with white cement.

11.10.3 40mm thick marble chips flooring, rubbed sqm 14.94


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Medium shade pigment
with 50% white cement and 50% ordinary
cement.

11.10.4 40mm thick marble chips flooring, rubbed Sqm 12.05


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :

Puducherry Region
11. Flooring
Page No.: 855
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

7 marble chips) by volume including cement


slurry etc. complete. White cement without
any pigment

11.10.5 40mm thick marble chips flooring, rubbed Sqm 17.83


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with ordinary cement.

11.10.6 40mm thick marble chips flooring, rubbed Sqm 12.05


and polished to granolithic finish, under
layer 31mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 9mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 4mm to 7mm nominal size
laid in cement marble powder mix 3:1 (3
cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder :
7 marble chips) by volume including cement
slurry etc. complete. Ordinary cement
without any pigment

11.11.1 40mm thick marble chips flooring, rubbed Sqm 10.97


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Dark shade pigment
with ordinary cement.

11.11.2 40mm thick marble chips flooring, rubbed Sqm 2.87


and polished to granolithic finish, under

Puducherry Region
11. Flooring
Page No.: 856
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

layer 28mm thick cement concrete 1:2:4 (1


cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with white cement.

11.11.3 40mm thick marble chips flooring, rubbed Sqm 6.92


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Medium shade with 50%
white cement and 50% ordinary cement.

11.11.4 40mm thick marble chips flooring, rubbed Sqm 10.97


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. White cement without
any pigment.

11.11.5 40mm thick marble chips flooring, rubbed Sqm 10.97


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal

Puducherry Region
11. Flooring
Page No.: 857
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

size laid in cement marble powder mix 3:1


(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Light shade pigment
with ordinary cement.

11.11.6 40mm thick marble chips flooring, rubbed Sqm 10.97


and polished to granolithic finish, under
layer 28mm thick cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size) and top
layer 12mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from 7mm to 10mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 2:3 (2 cement marble powder :
3 marble chips) by volume including cement
slurry etc. complete. Ordinary cement
without any pigment.

11.12.1.1 Marble chips skirting (upto 30cm height) Sqm 12.92


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand): Dark
shade pigement with ordinary cement.

11.12.1.2 Marble chips skirting (upto 30cm height) Sqm 8.87


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Light shade pigement with white cement.

11.12.1.3 Marble chips skirting (upto 30cm height) Sqm 10.89


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,

Puducherry Region
11. Flooring
Page No.: 858
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

chocolate, grey, yellow or green marble


chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Medium shade pigement with white cement.

11.12.1.4 Marble chips skirting (upto 30cm height) Sqm 8.87


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
White cement without any pigment.

11.12.1.5 Marble chips skirting (upto 30cm height) Sqm 12.92


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Light shade pigment with ordinary cement.

11.12.1.6 Marble chips skirting (upto 30cm height) Sqm 12.92


rubbed and polished to granolithic finish,
top layer 6mm thick with white, black,
chocolate, grey, yellow or green marble
chips of sizes from smallest to 4mm nominal
size laid in cement marble powder mix 3:1
(3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume: 18mm thick
with under layer 12mm thick in cement
plaster 1:3 (1 cement :3 coarse sand):
Ordinary cement without any pigment.

11.15.1 Crazy marble stone flooring including Sqm 12.00


filling the gaps with light shade pigment

Puducherry Region
11. Flooring
Page No.: 859
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

with white cement marble powder mixture (3


parts of white cement : 1 part of marble
powder) by weight in proportion of 4:7 (4
cement marble powder mix :7 white, black or
white and black marble chips of sizes from
1mm to 4mm nominal size by volume) and
under layer 25mm thick cement concrete
1:2:4 (1 cement :2 coarse sand : 4 graded
stone aggregate 12.5mm nominal size)
rubbing, polishing and cement slurry etc.
complete: 18mm thick crazy marble stone
white, black or as specified.

11.20.1 Chequered precast concrete tiles 22mm thick Sqm 12.76


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). Light shade using white
cement.

11.20.2 Chequered precast concrete tiles 22mm thick Sqm 15.16


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). Medium shade using 50%
white cement 50% grey cement.

11.20.3 Chequered precast concrete tiles 22mm thick Sqm 17.56


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). Dark shade using ordinary
cement.

11.20.4 Chequered precast concrete tiles 22mm thick Sqm 17.56


in foot path and courtyard jointed with
neat cement slurry mixed with pigment to
match the shade of the tiles including
rubbing and cleaning etc. complete on 20mm
thick bed of cement mortar 1:4 (1 cement :
4 coarse sand). ordinary cement without
any pigment.

11.21.1.1 Providing and fixing 10mm thick acid and / Sqm -0.04
or alkali resistant tiles of approved

Puducherry Region
11. Flooring
Page No.: 860
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

make(Somany / Johnson / Durastone) and


colour using acid and / or alkali resisting
mortar bedding and joints filled with acid
and / or alkali resisting cement as per IS:
4457 complete. In flooring on a bed of
10mm thick mortar 1:4 (1 acid proof cement
: 4 coarse sand). Acid and alkali resistant
tile.

11.21.2.1 Providing and fixing 10mm thick acid and / Sqm -3.28
or alkali resistant tiles of approved make
(Somany / Johnson / Durastone) and colour
using acid and / or alkali resisting mortar
bedding and joints filled with acid and /
or alkali resisting cement as per IS: 4457
complete. In dado / skirting on 12mm thick
mortar 1:4 (1 acid proof cement : 4 coarse
sand). Acid and alkali resistant tile.

11.22.1.1 Tile work in skirting, risers of steps and Sqm 10.44


dado (upto 2m height) over 12mm thick bed
of cement mortar 1:3 (1 cement : 3 coarse
sand) and jointed with grey cement slurry @
3.3kg/sqm including pointing in white
cement mixed with pigment of matching shade
complete. Marble tiles (Polished) Raj
Nagar. 8mm thick.

11.23.1 Marble stone flooring with 18mm thick Sqm 13.51


marble stone (sample of marble shall be
approved) over 20mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Makrana white second
quality.

11.23.2 Marble stone flooring with 18mm thick Sqm 13.51


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Raj Nagar plain.

11.23.3 Marble stone flooring with 18mm thick Sqm 13.51


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing

Puducherry Region
11. Flooring
Page No.: 861
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

complete with: Agaria white.

11.23.4 Marble stone flooring with 18mm thick Sqm 13.51


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Black zebra

11.23.5 Marble stone flooring with 18mm thick Sqm 13.51


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Udaipur green marble.

11.23.6 Marble stone flooring with 18mm thick Sqm 13.51


marble stone (sample of marble shall be
approved ) over 20mm (average) thick base
of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement
slurry including rubbing and polishing
complete with: Pink plain marble.

11.26.1 Kota stone slab flooring over 20mm Sqm 14.91


(average) thick base laid over and jointed
with grey cement slurry mixed with pigment
to match the shade of the slab including
rubbing and polishing complete with base of
cement mortar 1:4 (1 cement : 4 coarse
sand). 25mm thick.

11.27 Kotta stone slabs 25mm thick in risers of Sqm 13.74


steps, skirting, dado and pillars laid on
12mm (average) thick cement mortar 1:3 (1
cement : 3 coarse sand) and jointed with
grey cement slurry mixed with pigment to
match the shade of the slabs, including
rubbing and polishing complete.

11.28.1 40mm thick fine dressed stone flooring over Sqm 7.75
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) with joints
finished flush. Red sand stone

11.28.2 40mm thick fine dressed stone flooring over Sqm 7.75
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) with joints
finished flush. White sand stone.

Puducherry Region
11. Flooring
Page No.: 862
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

11.29.1 40mm thick fine dressed stone flooring over Sqm 9.31
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) including
pointing with cement mortar 1:2 (1 cement :
2 stone dust) with an admixture of pigement
to match the shade of stone. Red sand
stone.

11.29.2 40mm thick fine dressed stone flooring over Sqm 9.31
20mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand) including
pointing with cement mortar 1:2 (1 cement :
2 stone dust) with an admixture of pigement
to match the shade of stone. White sand
stone.

11.30.1 40mm thick rubbed stone flooring over 20mm sqm 9.31
(average) thick base of cement mortar 1:5
(1 cement : 5 coarse sand) with joints 3mm
thick, side buttered with cement mortar 1:2
(1 cement : 2 stone dust) admixed with
pigment to match the shade of stone and
pointing with same mortar. Red sand stone.

11.30.2 40mm thick rubbed stone flooring over 20mm Sqm 9.31
(average) thick base of cement mortar 1:5
(1 cement : 5 coarse sand) with joints 3mm
thick, side buttered with cement mortar 1:2
(1 cement : 2 stone dust) admixed with
pigment to match the shade of stone and
pointing with same mortar. White sand
stone.

11.36A Providing and fixing 1st quallity ceramic sqm 10.44


glazed wall tiles conforming to IS : 15622
(thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 200 x 300 mm as approved
in skirting, risers of steps and dados over
12mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3 kg per sqm.
Including pointing in white cement mixed
with pigment of matching shade complete. -
size 200x300mm

11.36B Providing and fixing 1st quallity ceramic sqm 10.44


glazed wall tiles conforming to IS : 15622
(thickness to be specified by the
manufacture of approved make (Jhonson /

Puducherry Region
11. Flooring
Page No.: 863
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

Asian / Somany / Nitco) in all colours,


shades of size 300 x 450 mm as approved
in skirting, risers of steps and dados over
12mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3 kg per sqm.
Including pointing in white cement mixed
with pigment of matching shade complete. -
size 300x450mm

11.36C Providing and fixing 1st quallity ceramic sqm 10.44


glazed wall tiles conforming to IS : 15622
(thickness to be specified by the
manufacture of approved make (Jhonson /
Asian / Somany / Nitco) in all colours,
shades of size 300 x 600 mm in skirting,
risers of steps and dados over 12mm thick
bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement
slurry @ 3.3 kg per sqm. Including pointing
in white cement mixed with pigment of
matching shade complete. - size 300x600mm

11.37 Providing and laying ceramic glazed floor Sqm 12.42


tiles 300X300mm (thickness to be specified
by the manufacture) of 1st quality
conforming to IS : 15622 of approved make
(Bell / Johnson / Regency / Somany / Naveen
/ Asian ) in colours such as white, ivory,
grey, fume red, brown laid on 20mm thick
cement mortar 1:4(1 cement : 4 Coarse sand)
including pointing the joints with white
cement and matching pigment etc., complete

11.37.1 Providing and laying ceramic glazed floor sqm 12.42


tiles 300X300mm (thickness to be specified
by the manufacture) of 1st quality
conforming to IS : 15622 of approved make
(Nitco / Kajaria ) in colours such as
white, ivory, grey, fume red, brown laid on
20mm thick cement mortar 1:4(1 cement : 4
Coarse sand) including pointing the joints
with white cement and matching pigment
etc., complete

11.38 Providing and laying ceramic glazed floor Sqm 12.42


tiles 300x300 mm (thickness to be specified
by the manufacturer) of first quality
conforming to IS: 15622 of approved make
(Bell / Johnson / Regency / Somany / Naveen
/ Asian ) in all colors, shades, except

Puducherry Region
11. Flooring
Page No.: 864
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

white, ivory, grey, fume red brown laid on


20mm thick bed of cement mortar 1:4 (1
cement : 4 coarse sand) including pointing
the joints with white cement and matching
pigments etc., complete.

11.38.1 Providing and laying ceramic glazed floor sqm 12.42


tiles 300x300 mm (thickness to be specified
by the manufacturer) of first quality
conforming to IS: 15622 of approved make
(Nitco / Kajaria ) in all colors, shades,
except white, ivory, grey, fume red brown
laid on 20mm thick bed of cement mortar 1:4
(1 cement : 4 coarse sand) including
pointing the joints with white cement and
matching pigments etc., complete.

11.39 Providing and laying rectified glazed Sqm 12.42


ceramic floor tiles 300x300mm or
more(thicknes to be specified by the
manufacturer) of first quality conforming
to IS: 15622 of approved make (Somany /
Nitco / Johnson )in colors white, ivory,
grey, fume red brown laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse
sand) including grouting the joints with
white cement and matching pigments etc.,
complete.

11.40 Providing and laying rectified glazed Sqm 12.42


ceramic floor tiles 300x300mm or
more(thicknes to be specified by the
manufacturer) of first quality conforming
to IS: 15622 of approved make (Somany /
Nitco / Jhonson ) in all colours shades
except white, ivory, grey, fume red brown
laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including pointing
the joints with white cement and matching
pigments etc., complete.

11.40.1 Providing and laying rectified ceramic sqm 12.42


rustic / matt finish floor tiles 300x300 mm
or more (thickness to be specified by the
manufacturer ) of 1st quality conforming to
IS:15622 of approved make ( Somany / Nitco)
in all colours shades laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse
sand) including pointing the joints with
white cement and matching pigments etc.,
complete

Puducherry Region
11. Flooring
Page No.: 865
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

11.40.2 Providing and laying rectified ceramic sqm 12.42


rustic / matt finish floor tiles 600x600 mm
or more (thickness to be specified by the
manufacturer ) of 1st quality conforming to
IS:15622 of approved make ( Somany / Nitco)
in all colours shades laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse
sand) including pointing the joints with
white cement and matching pigments etc.,
complete

11.41.2A Providing and laying fully vitrified floor sqm 12.42


tiles of size 60x60cm (thicknes to be
specified by the manufacturer) with water
absorption's less than 0.08% and conforming
to IS: 15622 of approved make (Nitco / Rak
/ Johnson / Asian) in all colors and
shades, laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement and
matching pigments etc., complete. Size of
Tile 600x600mm.

11.41.2B Providing and laying Soluble salt sqm 12.42


vitrified floor tiles of size 60x60cm
(thicknes to be specified by the
manufacturer) with water absorption's less
than 0.08% and conforming to IS: 15622 of
approved make (Nitco / Somany / Johnson /
Asian) in all colors and shades, laid on
20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints
with white cement and matching pigments
etc., complete. Size of Tile 600x600mm.

11.41.4A Providing and laying fully vitrified floor sqm 12.42


tiles of size100X100cm (thicknes to be
specified by the manufacturer) with water
absorption's less than 0.08% and conforming
to IS: 15622 of approved make (Nitco / Rak
/ Johnson / Asian) in all colors and
shades, laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement and
matching pigments etc., complete. Size of
Tile 1000x1000mm.

11.42 Dedect for not using 20mm thick cement Sqm 12.42
mortar 1:4 (1 cement : 4 coarse sand)
bedding laying of floor tiles.

Puducherry Region
11. Flooring
Page No.: 866
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

11.51 Providing and laying 22mm thick factory sqm 17.31


made pre polished cement concrete flooring
tiles of required colour and design over 20
mm thick cement mortar 1:4 ( 1 cement : 4
sand) and jointed with cement slurry mixed
with an admixture of pigment to match the
shade of the tile - (Endura \ Ultra \
Dazzle \ Technic)

Puducherry Region
12. Roofing
Page No.: 867
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

12.20 Providing and laying pressed clay tiles (as Sqm 21.66
per approved pattern 18mm nominal thickness
and of approved size) on roofs jointed with
cement mortar 1:4 (1 cement : 4 coarse
sand) mixed with 2% intergral water
proofing compound laid over a bed of 20mm
thick cement mortar 1:4 (1 cement : 4
coarse sand) and finished neat complete.

12.21.1 Providing gola 75X75mm in cement concrete metre 3.45


1:2:4 (1 cement : 2 coarse sand : 4 stone
aggregate 10mm down gauge) including
finishing with cement mortar 1:3 (1 cement
: 3 fine sand) as per standard design: In
75X75mm deep chase.

12.22 Making khurras 45X45cm with average minimum No 5.89


thickness of 5cm cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate of 20mm nominal size) over P.V.C.
sheet 1mX1mx400micron, finished with 12mm
cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement rounding
the edge and making and finishing outlet
complete.

12.23.1.1 Providing sand stone slab for roofing and Sqm 0.74
laying them in cement mortar 1:4 (1 cement
: 4 coarse sand) over wooden karries or
R.C.C. battens (karries and battens to be
paid separately) including pointing the
ceiling joints with cement mortar 1:3 (1
cement : 3 fine sand) complete: Red sand
stone slab 40 to 50 mm thick

12.23.2.1 Providing sand stone slab for roofing and Sqm 0.74
laying them in cement mortar 1:4 (1 cement
: 4 coarse sand) over wooden karries or
R.C.C. battens (karries and battens to be
paid separately) including pointing the
ceiling joints with cement mortar 1:3 (1
cement : 3 fine sand) complete: White sand
stone slab 40 to 50 mm thick.

12.38.1 Providing and fixing M.S. holder bat clamps Nos 0.32
of approved design to C.I. or S.C.I. , rain
water pipes embeded in and including
cement concrete blocks 10X10X10cm of 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size) and cost
of cutting holes and making good the walls

Puducherry Region
12. Roofing
Page No.: 868
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

etc. : 100mm diameter.

12.38.2 Providing and fixing M.S. holder bat clamps No 0.32


of approved design to C.I. or S.C.I. , rain
water pipes embeded in and including
cement concrete blocks 10X10X10cm of 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size) and cost
of cutting holes and making good the walls
etc. : 150mm diameter.

Puducherry Region
13. Finishing
Page No.: 869
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

13.1.1 12mm cement plaster of mix :Cement mortar sqm 5.47


1:4 (1 cement : 4 fine sand)

13.1.2 12mm cement plaster of mix :Cement mortar sqm 3.60


1:6 (1 cement : 6 fine sand)

13.2.1 15 mm cement plaster on rough side of sqm 6.53


single or half brick wall of mix - cement
mortar 1:4 (1 cement : 4 fine sand)

13.2.2 15mm cement plaster on the rough side of sqm 4.30


single or half brick wall of mix: cement
mortar 1:6 (1 cement : 6 fine sand)

13.3.1 20mm cement plaster of mix 1:4 (1cement : 4 sqm 8.51


fine sand)

13.3.2 20mm cement plaster of mix cement mortar sqm 5.60


1:6 (1 cement : 6 fine sand)

13.4.1 12mm cement plaster of mix cement mortar sqm 5.47


1:4 (1 cement : 4 coarse sand)

13.4.2 12mm cement plaster of mix cement mortar sqm 3.60


1:6 (1cement : 6 coarse sand)

13.5.1 15mm cement plaster on rough side of single sqm 6.53


or half brick wall of mix - 1:4 (1 cement :
4 coarse sand)

13.5.2 15 mm cement plaster on rough side of sqm 4.30


single or half brick wall of mix 1:6 (1
cement : 6 coarse sand)

13.6.1 20 mm cement plaster of mix 1 :4 (1 cement sqm 8.51


: 4 coarse sand)

13.6.2 20 mm cement plaster of mix 1:6 (1 cement : sqm 5.60


6 coarse sand)

13.7.1 12 mm cement plaster finished with a sqm 9.34


floating coat of neat cement of mix 1:3 (1
cement : 3 fine sand)

13.7.2 12 mm cement plaster finished with a sqm 7.47


floating coat of neat cement of mix 1:4 (1
cement : 4 fine sand)

13.8.1 15 mm cement plaster on rough side of sqm 10.77


single or half brick wall finished with a
floating coat of neat cement of mix 1:3 (1

Puducherry Region
13. Finishing
Page No.: 870
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cement : 3 fine sand).

13.8.2 15 mm cement plaster on rough side of sqm 8.53


single or half brick wall finished with a
floating coat of neat cement of mix 1:4 (1
cement : 4 fine sand)

13.9.1 Cement plaster 1:3 (1 cement : 3 coarse sqm 9.34


sand) finished with a floating coat of neat
cement 12 mm cement plaster.

13.9.2 Cement plaster 1:3 (1 cement : 3 coarse sqm 13.42


sand) finished with a floating coat of neat
cement 20 mm cement plaster.

13.10 15 mm cement plaster 1:3 (1 cement : 3 sqm 10.77


coarse sand) finished with a floating of
neat cement on the roughside of single or
half brick wall.

13.11 18 mm cement plaster in two coats under sqm 6.26


layer 12 mm thick cement plaster 1:5 (1
cement : 5 coarse sand) finished with a top
layer 6mm thick cement plaster 1:6 (1
cement : 6 fine sand).

13.12 18 mm cement plaster in two coats under sqm 8.13


layer 12 mm thick cement plaster 1:5 (1
cement : 5 coarse sand) and a top layer 6mm
thick cement plaster 1:3 (1 cement : 3
coarse sand) finished rough with sponge.

13.13 12 mm cement plaster 1:2 (1 cement : 2 sqm 9.79


stone dust).

13.14 15 mm cement plaster 1:2 (1 cement : 2 sqm 11.69


stone dust) on the rough side of single or
half brick wall.

13.15 20 mm cement plaster 1:2 (1 cement : 2 sqm 15.23


stone dust).

13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 sqm 3.67


fine sand).

13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sqm 5.67


sand) finished with a floating coat of neat
cement and thick coat of lime wash on top
of walls when dry for bearing of R.C.C
slabs and beams.

Puducherry Region
13. Finishing
Page No.: 871
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

13.18 Neat cement punning. sqm 2.20

13.19.1 Rough cast plaster upto 10m height above sqm 11.59
ground level with a mixture of sand and
gravel or crushed stone from 6mm to 10mm
nominal size dashed over and including the
fresh plaster in two layers under layer
12mm cement plaster 1:4 (1 cement : 4
coarse sand) and top layer 10mm cement
plaster 1:3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by
volume of cement - Ordinary cement finish
using ordinary cement.

13.20 Pebble dash plaster upto 10m height above sqm 11.59
ground level with a mixture of washed
pebble or crushed stone 6mm to 12.5mm
nominal size dashed over and including the
fresh plaster in two layers, under layer
12mm cement plaster 1:4 (1 cement : 4
coarse sand) and top layer 10mm cement
plaster 1:3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by
volume of cement.

13.28.1 12mm thick plain cement mortar bands in unit 0.05


cement mortar 1:4 (1 cement : 4 fine sand)
- Flush Band. (Cost for 1 metre long and 1
cm wide band)

13.28.2 12mm thick plain cement mortar bands in unit 0.05


cement mortar 1:4 (1 cement : 4 fine sand)
- Sunk Band. (Cost for 1 metre long and 1
cm wide band)

13.28.3 12mm thick plain cement mortar bands in unit 0.05


cement mortar 1:4 (1 cement : 4 fine sand)
- Raised Band. (Cost for 1 metre long and 1
cm wide band)

13.28.4 12mm thick plain cement mortar bands in unit 0.05


cement mortar 1:4 (1 cement : 4 fine sand)
- Moulded Band. (Cost for 1 metre long and
1 cm wide band)

13.29.1 18mm thick plain cement mortar bands in unit 0.07


cement mortar 1:4 (1 cement : 4 fine sand)
- Flush Band. (Cost for 1 metre long and 1
cm wide band)

13.29.2 18mm thick plain cement mortar bands in unit 0.07

Puducherry Region
13. Finishing
Page No.: 872
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cement mortar 1:4 (1 cement : 4 fine sand)


- Sunk Band. (Cost for 1 metre long and 1
cm wide band)

13.29.3 18mm thick plain cement mortar bands in unit 0.07


cement mortar 1:4 (1 cement : 4 fine sand)
- Raised Band. (Cost for 1 metre long and 1
cm wide band)

13.29.4 18mm thick plain cement mortar bands in unit 0.09


cement mortar 1:4 (1 cement : 4 fine sand)
- Moulded Band. (Cost for 1 metre long and
1 cm wide band)

13.30 18mm thick moulded cement mortar band in unit 0.08


two coats under layer 12mm thick with
cement mortar 1:5 (1 cement : 5 course
sand) top layer 6mm thick with cement
mortar 1:4 (1 cement : 4 fine sand). (Cost
for 1 metre long and 1 cm wide band)

13.31.1 Pointing on brick work or brick flooring sqm 1.53


with cement mortar 1:3 (1 cement : 3 fine
sand) - Flush / Ruled / Struck or weathered
pointing

13.31.2 Pointing on brick work or brick flooring sqm 2.34


with cement mortar 1:3 (1 cement : 3 fine
sand) - Raised and cut pointing

13.32.1 Pointing on tile brick work with cement sqm 2.34


mortar 1:3 (1 cement : 3 fine sand) - Flush
/ Ruled / Struck or weathered pointing

13.33.1 Pointing on stone work with cement mortar sqm 1.17


1:3 (1 cement : 3 fine sand) - Flush /
Ruled pointing.

13.33.2 Pointing on stone work with cement mortar sqm 1.93


1:3 (1 cement : 3 fine sand) - Raised and
cut pointing.

13.35.1 Pointing on stone slab ceiling with cement sqm 1.02


mortar 1:2 (1 cement : 2 fine dust) - Flush
/ Ruled pointed.

13.72 Washed stone grit plaster on exterior walls sqm 17.47


of height upto 10m above ground level in
two layers, under layer 12mm cement plaster
1:4 (1 cement : 4 coarse sand) furrowing
the under layer with scratching tool,

Puducherry Region
13. Finishing
Page No.: 873
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

applying cement slurry on the under layer @


2 kg. of cement per square metre, top layer
15mm cement plaster 1:1/2:2 (1 cement : 1/2
coarse sand : 2 stone chipping 10mm nominal
size) in panels with groove all around as
per approved pattern including scrubbing
and washing, the top layer with brushes and
water to expose the stone chippings
complete as per specification (Payment for
providing grooves shall be made
separately).

13.77 Extra for using white cement in place of sqm -10.00


ordinary cement in the top layer of the
item of washed stone grit, plaster.

Puducherry Region
14. Repairs To Buildings
Page No.: 874
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

14.1.1 Repairs to plaster of thickness 12mm to sqm 6.95


20mm in patches of area 2.5 sq. metres and
under including cutting the patch in proper
shape, raking out joints and preparing and
plastering the surface of the walls
complete including disposal of rubbish to
the dumping ground within 50 metres lead -
With cement mortar 1:4 (1 cement : 4 fine
sand)

14.1.2 Repairs to plaster of thickness 12mmto 20mm sqm 6.95


in patches of area 2.5 sq. metres and under
including cutting the patch in proper
shape, raking out joints and preparing and
plastering the surface of the walls
complete including disposal of rubbish to
the dumping ground within 50 metres lead -
With cement mortar 1:4 (1 cement : 4 coarse
sand)

14.2.1 Fixing chowkhats in existing opening each 9.10


including embedding chowkhats in floors or
walls cutting masonry for holdfasts
embedding hold fasts in cement concrete
blocks with cement concrete 1:3:6 (1 cement
:3 coarse sand : 6 graded stone aggregate
20mm nominal size) painting two coats of
approved wood preservative to sides of
chowkhats and making good the damages to
walls and floors as required complete
including disposal of rubbish to the
dumping ground within 50 metres lead - Door
chowkhats

14.2.2 Fixing chowkhats in existing opening each 5.90


including embedding chowkhats in floors or
walls cutting masonry for holdfasts
embedding hold fasts in cement concrete
blocks with cement concrete 1:3:6 (1 cement
:3 coarse sand : 6 graded stone aggregate
20mm nominal size) painting two coats of
approved wood preservative to sidesof
chowkhats and making good the damages to
walls and floors as required complete
including disposal of rubbish to the
dumping ground within 50 metres lead -
Window chowkhats

14.2.3 Fixing chowkhats in existing opening each 2.95


including embedding chowkhats in floors or
walls cutting masonry for holdfasts

Puducherry Region
14. Repairs To Buildings
Page No.: 875
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

embedding hold fasts in cement concrete


blocks with cement concrete 1:3:6 (1 cement
:3 coarse sand : 6 graded stone aggregate
20mm nominal size) painting two coats of
approved wood preservative to sidesof
chowkhats and making good the damages to
walls and floors as required complete
including disposal of rubbish to the
dumping ground within 50 metres lead -
Clerestory window chowkhats

14.4.1 Making the opening in brick masonry sqm 1.32


including dismantling in floor or walls by
cutting masonry and making good the damages
to walls, flooring and jambs complete to
match existing surface i/c disposal of
mulba / rubbish to the nearest dumping
ground - For door / window / clerestory
window.

14.14.1 Replacing sand stone slabs in roofing laid sqm 0.78


in cement mortar 1:4 (1 cement : 4 coarse
sand) including necessary repairs and
cement pointing with same mortar complete
including disposal of rubbish to dumping
ground within 50 metres of lead - Red/White
sand stone slabs 30 to 50mm thick.

14.18.1 Flush pointing with cement mortar 1:3 (1 sqm 0.76


cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight
of cement for flat tile bricks on top of
mud phaska - with F.P.S. brick tiles.

14.18.2 Flush pointing with cement mortar 1:3 (1 sqm 0.86


cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight
of cement for flat tile bricks on top of
mud phaska - with modular brick tiles

14.21 Renewing bottom rail and/or top rubber of kg 0.78


collapsible gate including making good all
damages and applying priming coat of zinc
chromate yellow primer of approved brand
and manufacturer.

14.28.1 Providing and fixing curtain rods of 1.25mm metre 0.01


thick brass plates with two brass brackets
fixed with brass screws and wooden plugs
etc. wherever necessary complete - 20mm
diameter.

Puducherry Region
14. Repairs To Buildings
Page No.: 876
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

14.28.2 Providing and fixing curtain rods of 1.25mm metre 0.01


thick brass plates with two brass brackets
fixed with brass screws and wooden plugs
etc. wherever necessary complete - 25mm
diameter.

14.72 Providing and fixing double scaffolding sqm 1.92


system (cup lock type) on the exterior
side, upto seven story height made with
40mm dia M.S. tube 1.5m centre to centre
horizontal & vertical tubes joining with
cup & lock system with M.S. tubes, M.S.
tube challies, M.S. clamps and M.S.
staircase system in the scaffolding for
working platform etc. and maintaining it is
a serviceable condition for the required
duration as approved and removing it there
after. The scaffolding system shall be
stiffened with bracings, runners,
connection with the building etc. wherever
required for inspection of work at required
locations with essential safety features
for the workmen etc. complete as approved.
The elevational area of the scaffolding
shall be measured for payment purpose. The
payment will be made once irrespective of
duration of scaffolding. (To be used for
maintenance work judicially necessary
deduction for scaffolding in the existing
item to be done)

Puducherry Region
16. Miscellaneous Building Work
Page No.: 877
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

16.13.2 Half brick masonry with bricks of class sqm 10.64


designation 35 in superstructure above
plinth level upto floor V level in cement
mortar 1:4 (1 cement: 4 coarse sand)

16.15.1 Supplying at site : R.C.C standards post cum 536.61


/struts/rails/pales of mix 1:1.5:3 (1
cement : 1.5 coarse aggregate: 3 graded
stone aggregate 12.5 mm nominal size ) with
wooden plugs or 6mm bar nibs,wherever
required as per direction of Engineer in
charge (cost of earth works in excavation,
concrete works to be paid separately)

16.42 Cement concrete 1:2:4 (1cement : 2coarse cum 320.00


sand : 4 graded stone aggregate 40mm
nominal size) in pavements, laid to
required slope and camber in panels as
required including consolidation finishing
and tamping complete.

16.75 Providing and laying C.C pavemnt of mix cum 410.00


M25 wtth ready mixed concrete from batching
plant .The ready mixed concrete shall be
laid and finished with screed board
vibrator, vaccum dewatering proces and
finally finished by floating brooming with
wire brush etc complete (The panel
shuttering work shall be paid for
separately).

Puducherry Region
17. Sanitary Installation
Page No.: 878
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

17.31 Providing and fixing 600x450mm bevelled number 0.04


edge mirror of superior glass (of approved
quality) complete with 6mm thick hard board
ground fixed to wooden cleats with C.P
brass screws and washers complete.

17.34.1 Providing and fixing toilet paper holder CP number 0.02


brass.

17.34.2 Providing and fixing toilet paper holder number 0.02


Vitreous china.

17.37.1 Providing and fixing M.S holder bat clamps bat clamp 0.32
of approved design to sand cast iron /cast
iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4
(one cement:two coarse sand:four graded
stone aggregate 20mm nominal size)
including cost of cutting holes and making
good the walls etc.
For 100mm dia pipe.

17.37.2 Providing and fixing M.S holder bat clamps bat clamp 0.32
of approved design to sand cast iron /cast
iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4
(one cement:two coarse sand:four graded
stone aggregate 20mm nominal size)
including cost of cutting holes and making
good the walls etc. for 75mm dia pipe.

17.61.1 Cutting chases in brick masonry walls for metre 4.84


following diameter sand cast
iron/centrifugally cast (spun) iron pipes
and making good the same with cement
concrete 1:3:6 (one cement ,three coarse
sand six graded stone aggregate 12.5mm
nominal size) including necessary plaster
and pointing in cement mortar 1:4 (one
cement,four coarse sand) 100mm dia.

17.61.2 Cutting chases in brick masonry walls for metre 3.30


following diameter sand cast
iron/centrifugally cast (spun) iron pipes
and making good the same with cement
concrete 1:3:6 (one cement ,three coarse
sand six graded stone aggregate 12.5mm
nominal size) including necessary plaster
and pointing in cement mortar 1:4(one
cement,four coarse sand) 75mm dia.

Puducherry Region
17. Sanitary Installation
Page No.: 879
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

17.61.3 Cutting chases in brick masonry walls for metre 1.76


following diameter sand cast iron /
centrifugally cast (spun) iron pipes and
making good the same with cement concrete
1:3:6 (one cement ,three coarse sand six
graded stone aggregate 12.5mm nominal size)
including necessary plaster and pointing in
cement mortar 1:4 (one cement,four coarse
sand) 50mm dia.

17.73.1 Providing and fixing PTMT towel rail no. 0.02


complete with brackets fixed to wooden
cleats with CP brass screws with concealed
fittings arrangement of approved quality
and colour 450 mm long towel rail with
total length of 495mm, 78mm wide and
effective height of 88mm, weighing not less
than 170gm.

17.73.2 Providing and fixing PTMT towel rail no. 0.02


complete with brackets fixed to wooden
cleats with CP brass screws with concealed
fittings arrangement of approved quality
and colour 600mm long towel rail with total
length of 645mm, width 78mm and effective
height of 88mm, weighing not less than 190
gm.

17.74 Providing and fixing PTMT shelf 440mm long, no. 0.02
124mm width and 36mm height of approved
quality and colour, weighing not less than
300gm.

Puducherry Region
18. Water Supply
Page No.: 880
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

18.2.1 Providing and fixing Polyethelene Aluminium metre 0.88


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 1216 (16mm OD)
pipe.

18.2.2 Providing and fixing Polyethelene Aluminium metre 0.88


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 1620 (20mm OD)
pipe.

18.2.3 Providing and fixing Polyethelene Aluminium metre 0.88


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 2025 (25mm OD)
pipe.

Puducherry Region
18. Water Supply
Page No.: 881
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

18.2.4 Providing and fixing Polyethelene Aluminium metre 0.88


Polyethelene (PE-AL-PE) composite pressure
pipes conforming to IS 15450 UV stabilised
with carbon black having thermal stability
for hot and cold water supply, capable to
withstand temperature upto 80øC including
all special fitting of composite material
(engineering plastic blend and brass
inserts wherever required) eg. Elbows,
tees,reducers,couplers and connectors etc
with clamps at 1 metre spacing. This
includes the cost of cutting chases and
including testing of joints complete -
Concealed work including cutting chases and
making good the wall etc. 2532 (32mm OD)
pipe.

18.5.1 Providing and fixing 3 layer PP-R (Poly metre 0.88


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints
complete(Concealed work including cutting
chases and making good the walls etc.,) -
PN-16 pipe, 16 mm OD.

18.5.2 Providing and fixing 3 layer PP-R (Poly metre 0.88


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints complete
(Concealed work including cutting chases
and making good the walls etc.,) - PN-16
pipe, 20 mm OD.

18.5.3 Providing and fixing 3 layer PP-R (Poly metre 0.88


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded poly propylene random

Puducherry Region
18. Water Supply
Page No.: 882
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

fittings i/c fixing the pipe with clamps at


1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints complete
(Concealed work including cutting chases
and making good the walls etc.,) - PN-16
pipe, 25 mm OD.

18.5.4 Providing and fixing 3 layer PP-R (Poly metre 0.88


Propylene Random copolymer) pipes SDR 7.4
UV stabilised & anti- microbial fusion
welded, having thermal stability for hot &
cold water supply including all PP-R plain
& brass threaded polypropylene random
fittings i/c fixing the pipe with clamps at
1 m spacing. This includes the cost of
cutting chases and making good the same
including testing of joints complete
(Concealed work including cutting chases
and making good the walls etc.,) - PN-16
pipe, 32 mm OD.

18.8.1 Providing and fixing chlorinated polyvinyl metre 0.88


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 15mm nominal outer dia pipes.

18.8.2 Providing and fixing chlorinated polyvinyl metre 0.88


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 20mm nominal outer dia pipes.

18.8.3 Providing and fixing chlorinated polyvinyl metre 0.88


chloride (CPVC) pipes having thermal
stability for hot & cold water supply

Puducherry Region
18. Water Supply
Page No.: 883
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

including all CPVC plain & brass threaded


fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 25mm nominal outer dia pipes.

18.8.4 Providing and fixing chlorinated polyvinyl metre 0.88


chloride (CPVC) pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of
pipes & fitting with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete (Concealed work including
cutting chases and making good the walls
etc.) - 32mm nominal outer dia pipes.

18.32.1 Constructing masonry chamber 30x30x50cm, chamber 27.64


inside with 75 class designation brick work
in cement mortar 1:4 (1cement 4 coarse
sand) for stop cock, with CI surface box
100x100x75mm (inside) with hinged cover
fixed in cement concrete slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) necessary
excavation foundation concrete 1:5:10 (one
cement 5 fine sand 10 graded stone
aggregate 40mm nominal size)and inside
plastering with cement mortor 1:3 (1cement
3 coarse sand) 12mmthick finished with a
floating coat of neat cement complete as
per standard design with F P S bricks.

18.33.1 Constructing masonry chamber 60x60x75 cm, chamber 148.23


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement, 4 coarse
sand) for sluice valve, with CI surface box
100 mm. top diameter, 160 mm bottom
diameter and 180 mm deep (inside) with
chained lid and RCC top slab 1:2:4 mix (1
cement, 2 coarse sand, 4 graded stone
aggregate 20 mm nominal size) necessary
excavation foundation concrete 1:5:10 (1
cerment,5 fine sand,10 graded stone
aggregate 40 mm nominal size) and inside

Puducherry Region
18. Water Supply
Page No.: 884
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

plastering with cement mortor 1:3 (1


cement,3 coarse sand)12 mm thick finished
with a floating coat of neat cement
complete as per standard design with F.P.S
bricks.

18.34.1 Constructing masonry chamber 90x90x100 cm, chamber 256.30


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement, 4 coarse
sand) for sluice valve, with CI surface box
100 mm top diameter, 160 mm bottom diameter
and 180 mm deep (inside) with chained lid
and RCC top slab 1:2:4 mix (1 cement 2
coarse sand,4 graded aggregate 20 mm
nominal size) necessary excavation
foudation conrete 1:5:10 (1 cement, 5 fine
sand,10 graded stone aggregate) 40 mm
nominal size) and inside plastering with
cement mortor 1:3 (1 cement,3 coarse sand)
12 mm thick finished with a floating coat
of neat cement completre as per standard
design with F.P.S bricks.

18.35.1 Constructing masonry chamber 120x120x100 cm chamber 359.48


, inside with 75 class designation brick
work in cement mortor 1:4 (1 cement,4
coarse sand) for sluice valve, with CI
surface box 100 mm top diameter, 160 mm
bottom diameter and 180 mm deep (inside)
with chained lid and RCC top slab 1:2:4 mix
(1 cement 2 coarse sand,4 graded aggregate
20 mm nominal size) necessary excavation
foudation conrete 1:5:10 (1 cement, 5 fine
sand,10 graded stone aggregate) 40 mm
nominal size) and inside plastering with
cement mortor 1:3 (1 cement,3 coarse sand)
12 mm thick finished with a floating coat
of neat cement completre as per standard
design with F.P.S bricks.

18.36.1 Constructing masonry chamber 60x60x75 cm , chamber 135.43


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement,4 coarse
sand) for fire hydrants, with CI surface
box 350x350 mm top and 165mm deep (inside)
with chained lid and RCC top slab 1:2:4 mix
(1 cement 2 coarse sand,4 graded aggregate
20 mm nominal size) necessary excavation
foudation conrete 1:5:10 (1 cement, 5 fine
sand,10 graded stone aggregate) 40 mm
nominal size) and inside plastering with

Puducherry Region
18. Water Supply
Page No.: 885
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cement mortor 1:3 (1 cement,3 coarse sand)


12 mm thick finished with a floating coat
of neat cement complete as per standard
design with F.P.S bricks.

18.37.1 Constructing masonry chamber 60x45x50 cm , chamber 132.88


inside with 75 class designation brick work
in cement mortor 1:4 (1 cement : 4 coarse
sand) for water meter complete with CI
double flap surface box 400x200x200 mm
(inside) with locking arrangement and RCC
top slab 1:2:4 mix (1 cement 2 coarse
sand,4 graded aggregate 20 mm nominal
size) necessary excavation foudation
conrete 1:5:10 (1 cement, 5 fine sand,10
graded stone aggregate) 40 mm nominal size)
and inside plastering with cement mortor
1:3 (1 cement,3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design with
F.P.S bricks.

18.76.1 Cutting holes upto 30x30 cm in walls hole 2.65


including making good the same with FPS
bricks.

18.77 Cutting holes upto 15x15 cm in Rcc floors hole 0.64


and roofs for passing drain pipe etc. and
reparing the hole after insertion of drain
pipe etc. with cement concrete 1:2:4 (1
cement, 2 coarse sand, 4 graded stone
aggregate 20 mm nominal size) including
finishing complete so as to make it leak
proof.

18.78 Making chases upto 7.5 x7.5 cm in walls metre 0.88


including making good and finishing with
matching surface after housing GI pipe etc.

18.79 Making hole upto 20x20 cm and embedding metre 4.84


pipes upto 150 mm diameter in masonry and
filling with cement concrete 1:3:6 (1
cement ,3 coarse sand, 6 graded stone
aggregate 20 mm nominal size) including
disposal of malba.

Puducherry Region
19. Drainage
Page No.: 886
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

19.2.1 Providing and laying cement concrete 1:5:10 metre 19.24


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 100 mm diameter SW pipe.

19.2.2 Providing and laying cement concrete 1:5:10 metre 23.53


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 150 mm diameter SW pipe.

19.2.3 Providing and laying cement concrete 1:5:10 metre 27.43


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 200mm diameter SW pipe.

19.2.4 Providing and laying cement concrete 1:5:10 metre 30.03


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 230 mm diameter SW pipe.

19.2.5 Providing and laying cement concrete 1:5:10 metre 31.72


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround SW
pipes including bed concrete as per
standard design - 250 mm diameter SW pipe.

19.3.1 Providing and laying cement concrete 1:5:10 metre 9.14


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 100 mm diameter SW pipe.

19.3.2 Providing and laying cement concrete 1:5:10 metre 14.82


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 150 mm diameter SW pipe.

19.3.3 Providing and laying cement concrete 1:5:10 metre 17.42


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 200 mm diameter SW pipe.

19.3.4 Providing and laying cement concrete 1:5:10 metre 19.11


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches

Puducherry Region
19. Drainage
Page No.: 887
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

of SW pipes including bed concrete as per


standard design - 230 mm diameter SW pipe.

19.3.5 Providing and laying cement concrete 1:5:10 metre 20.28


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 230 mm diameter SW pipe.

19.3.6 Providing and laying cement concrete 1:5:10 metre 23.40


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of SW pipes including bed concrete as per
standard design - 300 mm diameter SW pipe.

19.4.1.1 Providing and fixing square mouth SW gully trap 29.31


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 100x100mm size P
type with FPS Bricks class designation 75.

19.4.1.2 Providing and fixing square mouth SW gully trap 27.83


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 100x100mm size P
type with Sewer bricks conforming to IS
4885.

19.4.2.1 Providing and fixing square mouth SW gully trap 28.11


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 150x100mm size P
type with FPS bricks class designation 75.

19.4.2.2 Providing and fixing square mouth SW gully trap 26.63


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 150x100mm size P
type with sewer bricks conforming to IS:

Puducherry Region
19. Drainage
Page No.: 888
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

4885.

19.4.3.1 Providing and fixing square mouth SW gully trap 26.80


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 180x150mm size P
type with FPS bricks class designation 75.

19.4.3.2 Providing and fixing square mouth SW gully trap 25.32


trap grade 'A' complete with CI grating
brick masonry chamber with water tight CI
cover with frame of 300x300mm size (inside)
the weight of cover to be not less than
4.50 Kg and frame to be not less than 2.70
Kg as per standard design 180x150mm size P
type with Sewer bricks conforming to IS
4885.

19.6.1 Providing and laying non pressure NP2 class metre 0.50
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
100 mm dia RCC pipe.

19.6.2 Providing and laying non pressure NP2 class metre 0.60
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
150 mm dia RCC pipe.

19.6.3 Providing and laying non pressure NP2 class metre 0.90
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
250 mm dia RCC pipe.

19.6.4 Providing and laying non pressure NP2 class metre 1.10
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
300 mm dia RCC pipe.

19.6.5 Providing and laying non pressure NP2 class metre 2.40
(light duty) RCC pipes with collars jointed

Puducherry Region
19. Drainage
Page No.: 889
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

with stiff mixture of cement mortar in the


proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
450 mm dia RCC pipe.

19.6.6 Providing and laying non pressure NP2 class metre 2.60
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
500 mm dia RCC pipe.

19.6.7 Providing and laying non pressure NP2 class metre 3.20
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
600 mm dia RCC pipe.

19.6.8 Providing and laying non pressure NP2 class metre 3.70
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
700 mm dia RCC pipe.

19.6.9 Providing and laying non pressure NP2 class metre 4.20
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
800 mm dia RCC pipe.

19.6.10 Providing and laying non pressure NP2 class metre 4.90
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
900 mm dia RCC pipe.

19.6.11 Providing and laying non pressure NP2 class metre 5.50
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
1000 mm dia RCC pipe.

19.6.12 Providing and laying non pressure NP2 class metre 6.10
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)

Puducherry Region
19. Drainage
Page No.: 890
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

including testing of joints etc, complete -


1100 mm dia RCC pipe.

19.6.13 Providing and laying non pressure NP2 class metre 6.80
(light duty) RCC pipes with collars jointed
with stiff mixture of cement mortar in the
proportion of 1:2 (1cement : 2 fine sand)
including testing of joints etc, complete -
1200 mm dia RCC pipe.

19.7.1.1 Constructing brick masonry manhole in each 229.33


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 : cement :
2 Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement complete as
per standard design
Inside size 90x80 cm and 45 cm deep
including CI cover with frame (light duty)
455x610 mm internal dimensions total
weight of cover and frame to be not less
than 38 kg(weight of cover 23 kg and weight
of frame 15 kg) with F.P.S bricks with
class designation 75.

19.7.1.2 Constructing brick masonry manhole in each 225.46


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 : cement :
2 Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 90x80 cm and 45 cm deep
including CI cover with frame (light duty)
455x610 mm internal dimensions total

Puducherry Region
19. Drainage
Page No.: 891
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

weight of cover and frame to be not less


than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) with sewer bricks
conforming to IS 4885.

19.7.2.1 Constructing brick masonry manhole in each 381.51


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (medium duty)
500 mm internal diameter total weight of
cover and frame to be not less than 116 kg
(weight of cover 58 kg and weight of frame
58 kg) with F.P.S bricks with class
designation 75.

19.7.2.2 Constructing brick masonry manhole in each 370.91


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (medium duty)
500 mm internal diameter total weight of
cover and frame to be not less than 116 kg
(weight of cover 58 kg and weight of frame
58 kg) with sewer bricks conforming to IS
4885.

Puducherry Region
19. Drainage
Page No.: 892
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

19.7.3.1 Constructing brick masonry manhole in each 375.09


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand :4 graded stone aggregate 20 mm
nominal size) foundation concrete 1:4:8 mix
(1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortat
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand :4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (heavy duty)
560 mm internal diameter total weight of
cover with frame to be not less than 208 kg
(weight of cover 108 kg and weight of frame
100 kg) with F.P.S bricks with class
designation 75.

19.7.3.2 Constructing brick masonry manhole in each 368.49


cement mortar 1:4(1 cement : 4 Coarse sand)
R.C.C top slab with 1:2:4 mix (1 cement : 2
Coarse sand : 4 graded stone aggregate 20
mm nominal size) foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
Inside size 120x90 cm and 90 cm deep
including CI cover with frame (heavy duty)
560 mm internal diameter total weight of
cover and frame to be not less than 208 kg
(weight of cover 108 kg and weight of frame
100 kg) with sewer bricks conforming to IS
4885.

19.8.1.1 Extra for depth for man holes. Size 90x80 metre 125.81
cm with F.P.S bricks class designation 75.

19.8.1.2 Extra for depth for man holes. Size 90x80 metre 114.53
cm with sewer bricks conforming to IS 4885.

Puducherry Region
19. Drainage
Page No.: 893
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

19.8.2.1 Extra for depth for man holes. Size 120x90 metre 151.34
cm with F.P.S bricks class designation 75.

19.8.2.2 Extra for depth for man holes. Size 120x90 metre 137.89
cm with sewer bricks conforming to IS 4885.

19.9.1.1 Constructing brick masonry circular type each 275.05


manhole 0.91 metre internal dia at bottom
and 0.56 metre dia at top in cement mortar
1:4 (1 cement : 4 coarse sand) inside
cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat
cement, foundation concrete 1:3:6 mix (1
cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement all complete
as per standard design 0.91 metre deep with
S.F.R.C cover and frame (heavy duty, HD- 20
grade designation) 560 mm internal diameter
conforming to IS 12592, total weight of
cover and frame to be not less than 182 kg
, fixed in cement concrete 1:2:4 (1cement :
2 coarse sand :4graded stone aggregate 20mm
nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid for
separately) With F.P.S bricks class
designation 75.

19.9.1.2 Constructing brick masonry circular type each 269.01


manhole 0.91 metre internal dia at bottom
and 0.56 metre dia at top in cement mortar
1:4 (1 cement : 4 coarse sand) inside
cement plaster 12 mm thick with cement
mortar 1:3 (1 cement :3 coarse sand)
finished with a floating coat of neat
cement, foundation concrete 1:3:6 mix (1
cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement all complete
as per standard design 0.91 metre deep with
S.F.R.C cover and frame (heavy duty, HD- 20

Puducherry Region
19. Drainage
Page No.: 894
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

grade designation) 560 mm internal diameter


and conforming to IS 12592, total weight of
cover and frame to be not less than 182 kg
, fixed in cement concrete 1:2:4 (1cement :
2coarse sand : 4 graded stone aggregate
20mm nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid separately)
With Sewer bricks conforming to IS 4885.

19.10.1 Extra depth for circular type manhole 0.91 metre dept 138.54
m internal dia (at bottom) beyond 0.91m to h
1.67m With F.P.S bricks class designation
75.

19.10.2 Extra depth for circular type manhole 0.91 metre extr 102.15
m internal dia (at bottom) beyond 0.91m to a depth
1.67m With Sewer bricks conforming IS 4885.

19.11.1.1 Constructing brick masonry circular manhole each 538.56


1.22m internal dia at bottom and 0.56m dia
at top in cement mortar 1:4 (1 cement : 4
coarse sand) inside cement plaster 12 mm
thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement foundation concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone
aggregate 40mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished with
a floating coat of neat cement all complete
as per standard design 1.68 m deep with
SFRC cover and frame (heavy duty HD-20
grade designation) 560mm internal diameter
conforming to IS 12592, total weight of
cover and frame to be not less than 182 Kg.
fixed in cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate 20
mm nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid separately)
with F.P.S bricks class designation 75.

19.11.1.2 Constructing brick masonry circular manhole each 523.85


1.22m internal dia at bottom and 0.56m dia
at top in cement mortar 1:4 (1cement : 4
coarse sand) inside cement plaster 12mm
thick with cement mortar 1:3 (1 cement : 3

Puducherry Region
19. Drainage
Page No.: 895
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

coarse sand) finished with a floating coat


of neat cement foundation concrete 1:3:6
(1cement : 3 coarse sand : 6 graded stone
aggregate 40mm nominal size) and making
necessary channel in cement concrete 1:2:4
(1cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of neat cement all complete
as per standard design 1.68m deep with SFRC
cover and frame (heavy duty HD-20 grade
designation) 560mm internal diameter
conforming to IS 12592, total weight of
cover and frame to be not less than 182 Kg.
fixed in cement concrete 1:2:4 (1cement :
2coarse sand : 4 graded stone aggregate
20mm nominal size) including centering
shuttering all complete (Excavation foot
rests and 12mm thick cement plaster at the
external surface shall be paid separately)
with sewer bricks conforming IS :4885.

19.12.1 Extra depth for circular type manhole 1.22 metre extr 129.66
metre internal dia (at bottom) beyond 1.68 a depth
metre to 2.29 metre with F.P.S bricks class
designation 75.

19.12.2 Extra depth for circular type manhole 1.22 metre extr 129.66
metre internal dia (at bottom) beyond 1.68 a depth
metre to 2.29 metre with sewer bricks
conforming to IS 4885.

19.13.1.1 Constructing brick masonry circular manhole each 1,084.00


1.52 metre internal dia at bottom and 0.56
m dia at top in cement mortar 1:4 (1
cement, 4 coarse sand) inside cement
plaster 12 mm thick with cement mortar 1:3
(1 cement,3 coarse sand) finished with a
floating coat of neat cement, foundation
concrete 1:3:6 (1 cement, 3 coarse sand, 6
graded stone aggregate 40 mm nominal size)
and making necessary channel in cement
concrete 1:2:4 (1 cement, 2 coarse sand, 4
graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat
cement all complete as per standard design
2.30 m deep with S.F.R.C cover in frame
(heavy duty HD -20 grade designation) 560
mm internal diameter conforming to IS
12592, total weight of cover and frame to
be not less than 182 kg fixied in cement
concrete 1:2:4 (1 cement, 2 coarse sand, 4

Puducherry Region
19. Drainage
Page No.: 896
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

graded stone aggregate 20 mm nominal size)


including centering, shuttering all
complete (excavation footrest and 12 mm
thick cement plaster at the external
surface shall be paid for separately with
F.P.S bricks class designation 75.

19.13.1.2 Constructing brick masonry circular manhole each 1,042.05


1.52 metre internal dia at bottom and 0.56
m dia at top in cement mortar 1:4 (1
cement, 4 coarse sand) inside cement
plaster 12 mm thick with cement mortar 1:3
(1 cement,3 coarse sand) finished with a
floating coat of neat cement, foundation
concrete 1:3:6 (1 cement, 3 coarse sand, 6
graded stone aggregate 40 mm nominal size)
and making necessary channel in cement
concrete 1:2:4 (1 cement, 2 coarse sand, 4
graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat
cement all complete as per standard design
2.30 m deep with S.F.R.C cover in frame
(heavy duty HD -20 grade designation) 560
mm internal diameter conforming to IS
12592, total weight of cover and frame to
be not less than 182 kg fixied in cement
concrete 1:2:4 (1 cement, 2 coarse sand, 4
graded stone aggregate 20 mm nominal size)
including centering, shuttering all
complete (excavation footrest and 12 mm
thick cement plaster at the external
surface shall be paid for separately with
sewer bricks conforming IS:4885.

19.14.1 Extra depth for circular type manhole 1.52 metre extr 310.48
m internal dia (at bottom) beyond 2.30 m: a depth
with F.P.S bricks class designation 75.

19.14.2 Extra depth for circular type manhole 1.52 metre extr 278.58
m internal dia (at bottom) beyond 2.30 m: a depth
with sewer bricks conforming IS: 4885.

19.15.1 Providing M.S foot rests including fixing MS foot re 0.88


in manholes with 20x20x10 cm cement st
concrete blocks 1:3:6(1 cement, 3 coarse
sand, 6 graded stone aggregate 20 mm
nominal size) as per standard design: with
20x20 mm square bar.

19.15.2 Providing M.S foot rests including fixing MS foot re 0.88


in manholes with 20x20x10 cm cement st

Puducherry Region
19. Drainage
Page No.: 897
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

concrete blocks 1:3:6(1 cement, 3 coarse


sand, 6 graded stone aggregate 20 mm
nominal size) as per standard design : with
20 mm diameter round bar.

19.16 Providing orange colour safety foot rest of no. 1.98


minimum 6 mm thick plastic encapsulated as
per IS : 10910 on 12mm dia steel bar
conforming to IS : 1786 having minimum
cross section as 23 mmx25mm and over all
minimum length 263 mm and width as 165mm
with minimum 112 mm space between protruded
legs having 2 mm tread on top surface by
ribbing or chequering besides necessary and
adequate anchoring projections on tail
length on 138 mm as per standard drawing
and suitable to withstand the bend test and
chemical resistance test as per
specifications and having manufacture's
permanent identification mark to be visible
even after fixing, including fixing in
manholes with 30x20x15 cm cement concrete
block 1:3:6 (1 cement: 3 coarse sand: 6
graded stone aggregate 20 mm nominal size)
complete as per design.

19.17.1 Replacement of M.S foot rests in manholes no. 0.88


including dismantling concrete blocks and
fixing with 20x20x10cm cement concrete
blocks 1:3:6 (1cement : 3 coarse sand : 6
graded stone aggregate 20mm nominal size)
with 20x20 mm square bar.

19.17.2 Replacement of M.S foot rests in manholes no. 0.88


including dismantling concrete blocks and
fixing with 20x20x10cm cement concrete
blocks 1:3:6 (1cement : 3 coarse sand : 6
graded stone aggregate 20mm nominal size)
with 20 mm diameter round bar.

19.19.1.1 Providing and fixing in position precast no. 12.80


R.C.C manhole cover and frame of required
shape and approved quality LD-2.5
Rectangular shape 600x450mm internal
dimensions.

19.19.1.2 Providing and fixing in position precast no. 9.60


R.C.C manhole cover and frame of required
shape and approved quality LD-2.5 Square
shape 450mm internal dimensions.

Puducherry Region
19. Drainage
Page No.: 898
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

19.19.1.3 Providing and fixing in position precast no. 9.60


R.C.C manhole cover and frame of required
shape and approved quality LD-2.5 circular
shape 450mm internal dimensions.

19.19.2.1 Providing and fixing in position precast no. 12.80


R.C.C manhole cover and frame of required
shape and approved quality MD-10 Square
shape 450mmx450mm internal dimensions.

19.19.2.2 Providing and fixing in position precast no. 9.60


R.C.C manhole cover and frame of required
shape and approved quality MD-10 Circular
shape 500 mm internal diameter.

19.19.3.1 Providing and fixing in position precast no. 9.60


R.C.C manhole cover and frame of required
shape and approved quality HD-20 Circular
shape 560 mm internal diameter.

19.19.4.1 Providing and fixing in position precast no. 9.60


R.C.C manhole cover and frame of required
shape and approved quality EHD-35 Circular
shape 560 mm internal diameter.

19.21.1 Making connection of drain or sewer line connection 5.53


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1cement, 2coarse
sand, 4 graded stone aggregate 20mm nominal
size) cement plastered on both sides with
cement mortar 1:3 (1cement, 3 coarse sand)
finished with a floating coat of neat
cement and making necessary channels for
the drain etc. complete for pipes 100 to
230 mm diameter.

19.21.2 Making connection of drain or sewer line connection 9.39


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1cement, 2coarse
sand, 4 graded stone aggregate 20mm nominal
size) cement plastered on both sides with
cement mortar 1:3 (1cement, 3 coarse sand)
finished with a floating coat of neat
cement and making necessary channels for
the drain etc. complete for pipes 250 to
300 mm diameter.

19.21.3 Making connection of drain or sewer line connection 15.20


with existing manhole including breaking

Puducherry Region
19. Drainage
Page No.: 899
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

into and making good the walls, floors with


cement concrete 1:2:4 mix (1 cement, 2
coarse sand, 4 graded stone aggregate 20mm
nominal size) cement plastered on both
sides with cement mortar 1:3 (1cement, 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete for
pipes 350 to 450 mm diameter.

19.22.1 Providing sand cast iron drop connection drop conne 28.52
externally for 60 cm drop from branch sewer ction
line to main sewer manhole including
inspection and cleaning eye with chain and
lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1cement, 5 fine sand ,10 graded stone
aggregate 40mm nominal size) with all
centring and shuttering required, cutting
holes in walls and making good with brick
work in cement mortar 1:4 (1cement ,4coarse
sand) plastered with cement mortar 1:3 (one
cement, 3coarse sand) on inside of the
manhole wall lead caulked joints between
sand cast iron pipes, and fittings, stiff
cement mortar 1:1(1cement 1fine sand)
joints between sand cast iron tee and S.W
pipe, making required channels complete as
per standard design and specifications
100mm dia sand cast iron drop connection

19.22.2 Providing sand cast iron drop connection drop conne 37.43
externally for 60 cm drop from branch sewer ction
line to main sewer manhole including
inspection and cleaning eye with chain and
lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1cement, 5 fine sand ,10 graded stone
aggregate 40mm nominal size) with all
centring and shuttering required, cutting
holes in walls and making good with brick
work in cement mortar 1:4 (1cement ,4coarse
sand) plastered with cement mortar 1:3 (one
cement, 3coarse sand) on inside of the
manhole wall lead caulked joints between
sand cast iron pipes, and fittings, stiff
cement mortar 1:1(1cement 1fine sand)
joints between sand cast iron tee and S.W
pipe, making required channels complete as
per standard design and specifications
150mm dia sand cast iron drop connection

Puducherry Region
19. Drainage
Page No.: 900
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

19.23.1 Extra for depths beyond 60cm of sand cast drop conne 20.80
iron drop connection complete for 100mm dia ction
sand cast iron drop connection.

19.23.2 Extra for depths beyond 60cm of sand cast drop conne 26.00
iron drop connection complete for 150mm dia ction
sand cast iron drop connection.

19.26.1 Raising manhole cover and frame slab to each 54.40


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid sepatately) Rectangular manhole 90x80
cm with rectangular cover 600 x 450 mm of
grade LD 2.5

19.26.2 Raising manhole cover and frame slab to no. 83.20


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid separately) Rectangular manhole 120x90
cm with circular cover 500 mm dia of grade
MD-10.

19.26.3 Raising manhole cover and frame slab to no. 76.80


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid sepatately) Rectangular manhole 120x90
cm with circular cover 560 mm dia of grade
HD-20.

19.26.4 Raising manhole cover and frame slab to manhole 6.40


required level including dismantling
existing slab and making good the damage as
required (raising depth of manhole to be
paid sepatately) Circular manhole 140 cm
dia with circular cover 600 mm dia of grade
EHD-35.

19.27.1 Constructing brick masonry road gully chamber 93.04


chamber 50x45x60 cm with bricks of class
designation 75 in cement mortar 1:4 (1
cement: 4 coarse sand) including 500x450 mm
precast R.C.C horizontal grating with frame
complete as per standard design with F.P.S
bricks.

19.28.1 Constructing brick masonry road gully chamber 96.95


chamber 45x45x77.5 cm with bricks of class
designation 75 in cement mortar 1:4 (1

Puducherry Region
19. Drainage
Page No.: 901
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cement: 4 coarse sand) with precast R.C.C


vertical grating complete as per standard
design with F.P.S bricks.

19.29.1 Constructing brick masonry road gully chamber 165.45


chamber 110x50x77.5 cm with bricks of class
designation 75 in cement mortar 1:4 (1
cement: 4 coarse sand) including 500x450 mm
precast R.C.C horizontal grating with frame
and vertical grating complete as per
standard design with F.P.S bricks.

19.30.1.1 Constructing brick masonry chamber for chamber 89.55


underground CI inspection chamber and bends
with 75 class designation bricks in cement
mortar 1:4 (1 cement: 4 coarse sand) CI
cover with frame (light duty) 455x610 mm
internal dimensions, total weight of cover
with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame
15 kg) R.C.C top slab with 1:2:4 mix (1
cement :2 coarse sand:4 graded stone
aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement: 5 fine sand: 10
graded stone aggregate 40 mm nominal size)
inside plastering 12 mm thick with cement
mortar 1:3 (1 cement: 3 coarse sand)
finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete as per standard design Inside
dimensions 450 x 610 mm and 45 cm deep for
single pipe line with F.P.S bricks.

19.30.2.1 Constructing brick masonry chamber for chamber 100.91


underground CI inspection chamber and bends
with 75 class designation bricks in cement
mortar 1:4 (1 cement: 4 coarse sand) CI
cover with frame (light duty) 455 x 610 mm
internal dimensions, total weight of cover
with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame
15 kg) R.C.C top slab with 1:2:4 mix (1
cement :2 coarse sand:4 graded stone
aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement: 5 fine sand: 10
graded stone aggregate 40 mm nominal size)
inside plastering 12 mm thick with cement
mortar 1:3 (1 cement: 3 coarse sand)
finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete as per standard design Inside

Puducherry Region
19. Drainage
Page No.: 902
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

dimensions 500 x 700 mm and 45 cm deep for


pipe line with one or two inlets with F.P.S
bricks.

19.30.3.1 Constructing brick masonry chamber for chamber 125.42


underground CI inspection chamber and bends
with 75 class designation bricks in cement
mortar 1:4 (1 cement: 4 coarse sand) CI
cover with frame (light duty) 455 x 610 mm
internal dimensions, total weight of cover
with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame
15 kg) R.C.C top slab with 1:2:4 mix (1
cement :2 coarse sand:4 graded stone
aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement : 5 fine sand :
10 graded stone aggregate 40 mm nominal
size) inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse
sand) finished smooth with a floating coat
of neat cement on walls and bed concrete
etc. complete as per standard design Inside
dimensions 600 x 850 mm and 45 cm deep for
pipe line with three or more inlets with
F.P.S bricks.

19.31.1.1 Extra for depth beyond 45 cm of brick metre 86.40


masonry chamber for 455 x 610 mm size with
F.P.S bricks.

19.31.2.1 Extra for depth beyond 45 cm of brick metre 94.62


masonry chamber for 500 x 700 mm size with
F.P.S bricks.

19.31.3.1 Extra for depth beyond 45 cm of brick metre 110.69


masonry chamber for 600 x 850 mm size with
F.P.S bricks.

19.34.1 Providing and fixing SW intercepting trap no. 1.30


in manholes with stiff mixture of cement
mortar 1:1 (1 cement: 1 fine sand)
including testing of joints etc complete.
100 mm dia.

19.34.2 Providing and fixing SW intercepting trap no. 1.90


in manholes with stiff mixture of cement
mortar 1:1 (1 cement : 1 fine sand)
including testing of joints etc complete -
150 mm dia.

Puducherry Region
20. Pile Work
Page No.: 903
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

20.1.1 Providing, driving and installing driven metre 53.71


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
400mm dia. piles.

20.1.2 Providing, driving and installing driven metre 68.05


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
450mm dia. piles.

20.1.3 Providing, driving and installing driven metre 83.99


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
500mm dia. piles.

20.1.4 Providing, driving and installing driven metre 101.65


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
550mm dia. piles.

Puducherry Region
20. Pile Work
Page No.: 904
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

20.1.5 Providing, driving and installing driven metre 188.89


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
750mm dia. piles.

20.1.6 Providing, driving and installing driven metre 335.98


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1000mm dia. piles.

20.1.7 Providing, driving and installing driven metre 483.64


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1200mm dia. piles.

20.1.8 Providing, driving and installing driven metre 756.13


cast-in-situ reinforced cement concrete
piles of specified diameter and length
below the pile cap M35 in cement concrete,
to carry safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
shoe and the length of pile to be embeded
in the pile cap etc., all complete. (length
of pile for payment shall be measured from
top of shoe to the bottom of pile cap) :
1500mm dia. piles.

Puducherry Region
20. Pile Work
Page No.: 905
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

20.2.1 Boring, providing and installing bored metre 30.17


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 300mm
dia piles.

20.2.2 Boring, providing and installing bored metre 53.71


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 400mm
dia piles.

20.2.3 Boring, providing and installing bored metre 68.05


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 450mm
dia piles.

Puducherry Region
20. Pile Work
Page No.: 906
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

20.2.4 Boring, providing and installing bored metre 83.99


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 500mm
dia piles.

20.2.5 Boring, providing and installing bored metre 120.91


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 600mm
dia piles.

20.2.6 Boring, providing and installing bored metre 188.89


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap). 750mm
dia piles.

Puducherry Region
20. Pile Work
Page No.: 907
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

20.2.7 Boring, providing and installing bored metre 335.98


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1000mm dia piles.

20.2.8 Boring, providing and installing bored metre 483.64


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1200mm dia piles.

20.2.9 Boring, providing and installing bored metre 756.13


cast-in-situ reinforced cement concrete
pile of specified diameter and length below
the pile cap M35 in cement concrete, to
carry a safe working load not less than
specified, excluding the cost of steel
reinforcement but including the cost of
boring with, bentonite solutions and
temporary casing of appropriate length for
setting out and removal of same and the
length of the pile to be embedded in the
pile cap etc., all complete, including
removal of excavated earth with all lifts
and leads (length of pile for payment shall
be measured upto bottom of pile cap).
1500mm dia piles.

Puducherry Region
20. Pile Work
Page No.: 908
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

20.3.1 Boring, providing and installing bored metre 33.29


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 300mm dia piles.

20.3.2 Boring, providing and installing bored metre 63.25


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 400mm dia piles.

20.3.3 Boring, providing and installing bored metre 81.57


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 450mm dia piles.

20.3.4 Boring, providing and installing bored metre 102.72


cast-in-situ single under reamed pile of
specified diameter and length below the
pile cap M35 in cement concrete, to carry a
safe working load not less than specified,
excluding the cost of steel reinforcement
but including the cost of boring with,
bentonite solutions and the length of the
pile to be embedded in the pile cap etc.,
all complete. (length of pile for payment
shall be measured upto the bottom of pile
cap): 550mm dia piles.

Puducherry Region
20. Pile Work
Page No.: 909
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

20.4.1 Extra over item No. 20.3 for providing Bulb 14.12
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 300mm dia
piles.

20.4.2 Extra over item No. 20.3 for providing Bulb 26.96
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 400mm dia
piles.

20.4.3 Extra over item No. 20.3 for providing Bulb 34.66
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 450mm dia
piles.

20.4.4 Extra over item No. 20.3 for providing Bulb 43.65
additional bulb in under reamed piles,
under specified diameter (only the quantity
of extra bulbs are to be paid). 550mm dia
piles.

20.5.2 Providing, driving and installing driven metre 68.90


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 450mm dia piles.

20.5.3 Providing, driving and installing driven metre 84.84


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient

Puducherry Region
20. Pile Work
Page No.: 910
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

positive pressure to ensure complete


filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 500mm dia piles.

20.5.4 Providing, driving and installing driven metre 102.50


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 550mm dia piles.

20.5.5 Providing, driving and installing driven metre 233.68


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with
M.S. black pipe of dia 40mm for grouting
with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 750mm dia piles.

20.5.6 Providing, driving and installing driven metre 336.83


Pre-cast reinforced cement concrete piles
of specified diameter and length below the
pile cap in M35 cement concrete to carry
safe working load not less than specified.
With a central through performed hole with

Puducherry Region
20. Pile Work
Page No.: 911
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

M.S. black pipe of dia 40mm for grouting


with cement sand grouting of mix 1:2 (1
cement : 2 coarse sand) under sufficient
positive pressure to ensure complete
filling including centring, shuttering,
driving and removing the steel casing pipe
and lifting casing etc., complete but
excluding the cost of steel reinforcement.
(length of pile for payment shall be
measured from top of the shoe to the bottom
of pile cap). 1000mm dia piles.

Puducherry Region
21. Aluminium Work
Page No.: 912
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

21.4.1 Providing and fixing double action Each 0.64


hydraulic floor spring of approved brand
and manufacture IS : 6315 marked, for doors
including cost cutting floors as required,
embedding in floors and cover plate with
brass pivot and single piece M.S. sheet
outer box with slide plate etc., complete.
With stainless steel cover plate.

Puducherry Region
22. Water Proofing
Page No.: 913
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

22.1.1 Providing and laying intergral cement based Sqm 34.23


treatment for water proofing on horizontal
surface at all depth below ground level for
under ground structures and consisting of
: (i) 1st layer of 22mm to 25mm thick
approved and specified rough stone slab
over a 25mm thick base of cement mortar 1:3
(1 cement : 3 coarse sand) mixed with water
proofing compound conforming to IS : 2645
in the recommended proportion over the
levelling course (levelling course to be
paid separately) joints sealed and grouted
with cement slurry mixed with water
proofing compound. (ii) 2nd layer of 25mm
thick cement mortar 1:3 (1 cement : 3
coarse sand) mixed with water proofing
compound in recommended proportions. (iii)
Finishing top with stone aggregate of 10mm
to 12mm nominal size spreading @ 8 cudm /
sqm thoroughly embedded in the 2nd layer.
Using rough kota stone.

22.2.1 Providing and laying intergral cement based Sqm 44.42


treatment for water proofing on the
vertical surface by fixing specified stone
slab 22mm to 25mm thick with cement slurry
with water proofing compound conforming to
IS : 2645 in recommended propotions with a
gap of 20mm (minimum) between stone slab
and the receiving surfaces and filling the
gap with neat cement slurry mixed with
water proofing compound and finishing the
exterior of stone slab with cement mortar
1:3 (1 cement : 3 coarse sand) 20mm thick
neat cement punning mixed with water
proofing compound in recommended
proportions complete at all levels. Using
rough kota stone.

22.3 Providing and laying water proofing Sqm 15.82


treatment to vertical and horizontal
surfaces of depressed portions of W.C.,
kitchen and the like consisting of :
(i) 1st course of applying cement slurry @
4.4Kg/sqm. mixed with water proofing
compound conforming to IS : 2645 in
recommended proportions including rounding
off junction of vertical and horizontal
surface.
(ii) IInd course of 20mm cement plaster 1:3
(1cement : 3 coarse sand) mixed with water

Puducherry Region
22. Water Proofing
Page No.: 914
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

proofing compound in recommended proportion


including rounding off junction of vertical
and horizontal surface.
(iii) IIIrd course of applying blown or
residual bitumen applied hot at 1.7 kg/
sqm. of area.
(iv) IVth course of 400 micron thick PVC
sheet. (overlaps at joints of PVC sheet
should be 100mm wide and pasted to each
other with bitumen @ 1.7 Kg / sqm.)

22.5 Providing and laying water proofing Sqm 1.20


treatment in sunken portion of WCs,
bathroom etc., by applying cement slurry
mixed with water proofing cement compound
consisting of applying :
(a) First layer of slurry of cement @ 0.488
kg / sqm. mixed with water proofing cement
compound @ 0.253 kg / sqm. This layer will
be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @
0.242 Kg / sqm mixed with water proofing
cement compound @ 0.126 kg / sqm. This
layer will be allowed to air cure for 4
hours followed with water curing for 48
hours. The rate includes preparation of
surface, treatment and sealing of all
joints, corners, juncions of pipes and
masonary with polymer mixed slurry.

22.6 Providing and laying water proofing Sqm 2.00


treatment on roofs of slabs by applying
cement slurry mixed with water proofing
cement compound consisting of applying :
(a) after surface preparation, first layer
of slurry of cement @ 0.488 kg/ sqm mixed
with water proofing cement compound @ 0.253
kg / sqm.
(b) laying second layer of Fibre glass
cloth when the first layer is still green.
Overlaps of joints of fibre cloth should
not be less than 10cm.
(c) third layer of 1.5mm thickness
consisting of slurry of cement @ 1.289 kg /
sqm mixed with water proofing cement
compound @ 0.670 kg /sqm and coarse sand @
1.289 kg / sqm. This will be allowed to air
cure for 4 hours followed by water curing
for 48 hours. The entire treatment will be
taken upto 30cm on parapet wall and tucked
into groove in parapet all around.

Puducherry Region
22. Water Proofing
Page No.: 915
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

(d) fourth and final layer of brick tiling


with cement mortar (which will be paid for
separately) for the purpose of measurement
the entire treated surface will be
measured.

22.7.1 Providing and laying integral cement based Sqm 36.45


water proofing treatment including
preparation of surface as required for
treatment of roofs, balconies, terraces etc
consisting of following operations :
(a) Applying a slurry coat of neat cement
using 2.75 kg / sqm. of cement admixed with
water proofing compound conforming to IS :
2645 and approved over the RCC slab
including adjoining walls upto 300mm height
including cleaning the surface before
treatment.
(b) Laying brick bats with mortar using
broken bricks / brick bats 25mm to 115mm
size with 50% of cement mortar 1:5 (1
cement : 5 coarse sand) admixed with water
proofing compound conforming to IS : 2645
and approved over 20mm thick layer of
cement mortar of mix 1:5 (1 cement : 5
coarse sand) admixed with water proofing
compound conforming to IS : 2645 and
approved to required slope and treating
similarly the adjoining walls upto 300mm
height including rounding of junctions of
walls and slabs.
(c) After two days of proper curing
applying a second coat of cement slurry
using 2.75 kg / sqm. of cement admixed with
water proofing compound conforming to IS :
2645 and approved .
(d) Finishing the surface with 20mm thick
jointless cement mortar of mix 1:4 (1
cement : 4 coarse sand) admixed with water
proofing compound conforming to IS : 2645
and approved inclulding laying glass fibre
cloth of approved quality in top layer of
plaster and finally finishing the surface
with trowel with neat cment slurry and
making pattern of 300x300mm square 3mm
deep.
(e) The whole terrace so finished shall be
flooded with water for a minimum period of
two weeks for curing and for final test.
All above operations to be done in order
and as directed and specified by the

Puducherry Region
22. Water Proofing
Page No.: 916
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

Engineer-in-charge : With average thickness


of 120mm and minimum thickness at khurra
as 65mm.

22.14.1 Grading roof for water proofing treatment Cum 320.00


with. Cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm
nominal size) .

22.14.2 Grading roof for water proofing treatment Cum 510.00


with. Cement mortar 1:3 (1 cement : 3
coarse sand) .

22.14.3 Grading roof for water proofing treatment Cum 380.00


with. Cement mortar 1:4 (1 cement : 4
coarse sand) .

Puducherry Region
30. Irrigation
Page No.: 917
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

30.12 Providing and laying brick block of size cum 88.63


0.34x0.34x0.30mts. In C.M. 1:4 (1 cement :
4 fine sand) using well burnt country
bricks of class designation 35 for
launching apron including the bed, laying
to the required levels, slop etc. complete
as directed by the Engineer-in-charge.

30.13 Providing and laying brick block of size cum 88.63


0.34x0.34x0.23mts. In C.M. 1:4 (1 cement :
4 fine sand) using well burnt country
bricks of class designation 35 for apron
and revetment including levelling the bed,
laying to the required levels, slop etc.
complete as directed by the
Engineer-in-charge.

30.13C Providing and laying precast cement Cum 220.00


concrete blocks for launching apron of size
0.5 x 0.5 x 0.45m in cement concrete 1:3:6
( 1cement, 3sand and 6 Graded stone
aggregate) using 6mm thick steel mould
including consolidation, curing and placing
in position etc. complete.

30.13D Providing and laying precast cement Cum 220.00


concrete blocks for launching apron of size
0.9x 0.9 x 0.45m in cement concrete 1:3:6 (
1cement, 3sand and 6 Graded stone
aggregate) using 6mm thick steel mould
including consolidation, curing and placing
in position etc. complete.

30.18 Grouting the revetment not less than 15cm sqm 5.78
deep with cement concrete 1:5:10 (one
cement , five sand , and ten graded stone
aggregate of 12.50mm size) and pointing the
same with cement mortar 1:5 (one cement and
five sand ) to give an even and smooth
surface)

Puducherry Region
31. Water Supply (Public Health)
Page No.: 918
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

31.50.2 Constructing masonry Chamber 30 x 30 x 50 each 27.64


cm, inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for stop cock, with C.I.
surface box 100 x 100 x 75 mm (inside) with
hinged cover fixed in cement concrete slab
1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
necessary excavation foundation concrete
1:5:10 (1 cement :5 fine sand : 10 graded
stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design -
with brick class designation 35.

31.51.2 Constructing masonry Chamber 60 x 60 x 75 each 148.23


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter 160 mm
bottom diameter and 180 mm deep (inside)
with chained lid and R.C.C. top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded
stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design -
with brick class designation 35.

31.52.2 Constructing masonry Chamber 90 x 90 x100 each 256.30


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter 160 mm
bottom diameter and 180 mm deep (inside)
with chained lid and R.C.C. top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
necessary excavation, foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded
stone aggregate 40 mm nominal size) and
inside plastering with cement mortar 1:3 (1
cement : 3 coarse sand) 12 mm thick
finished with a floating coat of neat
cement complete as per standard design -

Puducherry Region
31. Water Supply (Public Health)
Page No.: 919
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

with brick class designation 35.

31.53.2 Constructing masonry Chamber 120x120x100cm each 359.48


inside with 35 class designation brick work
in cement mortar 1:4 (1 cement : 4 coarse
sand) for sluice valve, with C.I. surface
box 100mm top diameter 160mm bottom
diameter and 180mm deep (inside) with
chained lid and R.C.C top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) necessary
excavation foundation concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone
aggregate 40mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement
: 3 coarse sand) 12mm thick finished with a
floating coat of neat cement complete as
per standard design - with bricks class
designation 35

31.54.2 Constructing masonry Chamber 60 x 60 x 75 each 135.43


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for fire hydrants, with C.I.
surface box 350 x 550 mm top and 165 mm
deep (inside) with chained lid and R.C.C.
top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size) necessary excavation,
foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size) and inside plastering with
cement mortar 1:3 (1 cement : 3 coarse
sand) 12 mm thick finished with a floating
coat of neat cement complete as per
standard design - with brick class
designation 35

31.55.2 Constructing masonry chamber 60 x 45 x 50 each 132.88


cm inside with 35 class designation brick
work in cement mortar 1:4 (1 cement : 4
coarse sand) for water meter complete, with
C.I. double flap surface box 400 x 200 x
200 mm (inside) with locking arrangement
and R.C.C. top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20
mm nominal size) necessary excavation,
foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size) and inside plastering with
cement mortar 1:3 (1 cement : 3 course

Puducherry Region
31. Water Supply (Public Health)
Page No.: 920
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

sand) 12 mm thick finished with a floating


coat of neat cement complete as per
standard design - with brick class
designation 35

Puducherry Region
32. Sewerage (Public Health)
Page No.: 921
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

32.2.1 Providing and laying cement concrete 1:5:10 metre 1.90


(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround S.W.
pipes including bed concrete as per
standard design - 100 mm diameter.

32.4.1.2 Providing and fixing square-mouth S.W. each 29.31


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 100 x 100
mm size P type.

32.4.2.2 Providing and fixing square-mouth S.W. each 52.35


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 125 x
100 mm size P type.

32.4.4.2 Providing and fixing square-mouth S.W. each 28.01


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 180 x
100 mm size P type.

32.4.5.2 Providing and fixing square-mouth S.W. each 26.80


gully trap grade `A' complete with C.I.
grating brick masonry chamber with bricks
of class designation 35 and water tight
C.I. cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less
than 4.5 kg. and frame to be not less than
2.70 kg. as per standard design - 180 x
150 mm size P type.

32.6.1 Providing and laying non-pressure NP2 class metre 0.50


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.

Puducherry Region
32. Sewerage (Public Health)
Page No.: 922
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

complete - 100 mm dia.

32.6.2 Providing and laying non-pressure NP2 class metre 0.60


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 150 mm dia.

32.6.3 Providing and laying non-pressure NP2 class metre 0.90


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 250 mm dia.

32.6.4 Providing and laying non-pressure NP2 class metre 1.10


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 300 mm dia.

32.6.5 Providing and laying non-pressure NP2 class metre 2.40


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 450 mm dia.

32.6.10 Providing and laying non-pressure NP2 class metre 4.90


(light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar
in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc.
complete - 900 mm dia.

32.11.1.2 Constructing brick masonry manhole with 35 each 229.33


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with

Puducherry Region
32. Sewerage (Public Health)
Page No.: 923
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

a floating coat of neat cement complete as


per standard design - inside size 90 x 80
cm and 45 cm deep including C.I. cover with
frame (light duty) 455 x 610 mm internal
dimensions total weight of cover and frame
to be not less than 38 kg. (weight of cover
23 kg. and weight of frame 15 kg) - with
bricks of class designation 35.

32.11.2.2 Constructing brick masonry manhole with 35 each 248.35


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40mm nominal size) inside
plastering 12mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) neatly
finished complete as per standard design -
inside size 90 x 80cm and 60cm deep
including C.I. cover with frame (light
duty) 455 x 610mm internal dimensions total
weight of cover and frame to be not less
than 38 kg. (weight of cover 23 kg. and
weight of frame 15 kg.) - with bricks of
class designation 35.

32.11.3.2 Constructing brick masonry manhole with 35 each 381.51


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of nean cement complete as
per standard design - inside size 120 x 90
cm and 90 cm deep including C.I. cover with
frame (medium duty) 500 mm internal
diameter, total weight of cover and frame

Puducherry Region
32. Sewerage (Public Health)
Page No.: 924
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

to be not less than 116 kg. (weight of


cover 58 kg. and weight of frame 58 kg) -
with bricks of class designation 35.

32.11.4.2 Constructing brick masonry manhole with 35 each 377.61


class designation bricks in cement mortar
1:4 (1 cement : 4 coarse sand ) R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size) inside
plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand ) finished
with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with
a floating coat of nean cement complete as
per standard design - inside size 120 x 90
cm and 90 cm deep including C.I. cover with
frame (heavy duty) 560 mm internal
diameter, total weight of cover and frame
to be not less than 208 kg. (weight of
cover 108 kg. and weight of frame 100 kg)
- with bricks of class designation 35.

32.12.1.2 Extra for depth for manholes - size of 90 x metre 125.81


80 cm - with bricks of class designation
35.

32.12.2.2 Extra for depth for manholes - size 120 x metre 151.34
90 cm - with bricks of class designation
35.

32.17.1 Providing M.S. foot rests including fixing each 0.88


in manholes with 20 x 20 x 10 cm cement
concrete blocks 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm
nominal size) as per standard design - with
20 x 20 mm square bar.

32.17.2 Providing M.S. foot rests including fixing each 0.88


in manholes with 20 x 20 x 10 cm cement
concrete blocks 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm
nominal size) as per standard design - with
20 mm diameter round bar.

32.18.1 Replacement of M.S. foot rest in manhole each 0.88


including dismantling concrete blocks and

Puducherry Region
32. Sewerage (Public Health)
Page No.: 925
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

fixing with 20 x 20 x 10 cm cement concrte


blocks 1:3:6 ( 1 Cement : 3 coarse Sand : 6
grade stone aggregate 20mm nominal size )
with 20 x 20 mm square bar.

32.18.2 Replacement of M.S foot rests in manhole each 0.88


including dismantling concrete blocks and
fixing with 20 x 20 x 10 cm cement concrete
blocks 1:3:6 ( 1 cement : 3 coarse sand : 6
grade stone aggregate 20 mm nominal size)
with 20 mm diamter round bar.

32.19A.1.1 Providing and fixing in position precast each 12.80


R.C.C manhole cover and frame of reqired
shape and approved quality - LD - 2.5 -
rectangular shape 600 x 450 mm internal
dimensions.

32.19A.1.2 Providing and fixing in position precast each 9.60


R.C.C manhole cover and frame of reqired
shape and approved quality - LD - 2.5 -
square shape 450 mm internal dimensions

32.19A.1.3 Providing and fixing in position precast each 9.60


R.C.C manhole cover and frame of reqired
shape and approved quality - LD - 2.5 -
circular shape 450 mm internal diameter.

32.19A.2.1 Providing and fixing in position precast each 12.80


R.C.C manhole cover and frame of reqired
shape and approved quality - MD - 10 -
square 500 mm internal
dimensions.

32.19A.2.2 Providing and fixing in position precast each 9.60


R.C.C manhole cover and frame of reqired
shape and approved quality - MD - 10 -
circular shape 500 mm internal diamter

32.19A.3.1 Providing and fixing in position precast each 9.60


R.C.C manhole cover and frame of reqired
shape and approved quality - HD - 20 -
circular shape 560 mm internal diameter.
dimensions.

32.19A.4.1 Providing and fixing in position precast each 9.60

Puducherry Region
32. Sewerage (Public Health)
Page No.: 926
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

R.C.C manhole cover and frame of reqired


shape and approved quality - EHD - 35 -
circular shape 560 mm internal dia.

32.21.1 Making connection of drain or sewer line each 5.53


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 40
mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete. - for
pipes 100 to 230 mm diameter.

32.21.2 Making connection of drain or sewer line each 9.39


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 40
mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete. - for
pipes 250 to 300 mm diameter.

32.21.3 Making connection of drain or sewer line each 15.20


with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20
mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3
coarse sand) finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete. - for
pipes 350 to 450 mm diameter.

32.22.1 Providing sand cast iron drop connection each 28.52


externally for 60 cm drop from branch sewer
line to main sewer manhole including
inspection and cleaning eye with chain and
lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1 cement: 5 fine sand: 10 graded stone
aggregate with 40 mm nominal size) with all
centering and shuttering required, cutting
holes in walls and making good with brick

Puducherry Region
32. Sewerage (Public Health)
Page No.: 927
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

work in cement mortar 1:5 (1 cement : 5


fine cement) plastered with cement mortar
1:3 (1 cement : 3 coarse sand) on inside of
the manhole wall lead caulkled joints
between sand cast iron pipes and fittings,
stiff cement mortar 1:1 (1 cement : 1 fine
sand) joints between sand cast iron tee and
S.W. pipe making required channels complete
as per standard design and specification. -
100 mm dia. sand cast iron drop connection.

32.22.2 Providing sand cast iron drop connection each 37.43


externally for 60 cm drop from branch sewer
line to main sewer manhole including
inspection and cleaning eye with chain and
lid, sand cast iron drop pipe and bend
encased alround with cement concrete 1:5:10
(1 cement: 5 fine sand: 10 graded stone
aggregate with 40 mm nominal size) with all
centering and shuttering required, cutting
holes in walls and making good with brick
work in cement mortar 1:5 (1 cement : 5
fine sand) plastered with cement mortar 1:3
(1 cement : 3 coarse sand) on inside of the
manhole wall lead caulkled joints between
sand cast iron pipes and fittings, stiff
cement mortar 1:1 (1 cement : 1 fine sand)
joints between sand cast iron tee and S.W.
pipe making required channels complete as
per standard design and specification. -
150 mm dia. sand cast iron drop connection.

32.23.1 Extra for depths beyond 60 cm of sand cast metre 20.80


iron drop connection complete. - for 100 mm
dia sand cast iron drop connection.

32.23.2 Extra for depths beyond 60 cm of sand cast metre 26.00


iron drop connection complete. - for 150 mm
dia sand cast iron drop connection.

32.26A Providing R.C.C.spun vent shaft with cowl each 188.40


140 mm and 200 mm internal and external
dia. respectively at top 300 and 450 mm
internal and external dia. respectively at
bottom and 9.10 m overall length, bottom
1.25 m below ground level fixed in a pit 90
x 90 x 150 cm with cement concrete 1:4:8 (1
cement : 4 sand : 8 graded stone aggregate
20 mm nominal size) 25 cm in bed and
minimum 20 cm alround with top 15 cm in
cement concrete 1:2:4 (1 cement : 2 coarse

Puducherry Region
32. Sewerage (Public Health)
Page No.: 928
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

sand : 4 graded stone aggregate 20 mm


nominal size), junction of vent shaft and
concrete grouted with cement mortar 1:1 (1
cement : 1 fine sand) including making
connection with sewer manhole with 150 mm
dia. cement concrete pipe of required
length complete as per standard design.

32.27.2 Constructing brick masonry road gully each 93.04


chamber 50x45x60cm with bricks of class
designation 35 in cement mortar 1:4 (1
cement : 4 coarse sand) including 500x450mm
precast R.C.C. horizontal grating with
frame complete as per standard design:-
With Class 35 designation bricks.

32.28.2 Constructing brick masonry road gully each 96.95


chamber 45x45x77.5cm with bricks of class
designation 35 in cement mortar 1:4 (1
cement : 4 coarse sand) with precast R.C.C.
vertical grating complete as per standard
design - with class designation 35 bricks.

32.29.2 Constructing brick masonry road gully each 165.45


chamber 110x50x77.5cm with bricks of class
designation 35 in cement mortar 1:4 (1
cment : 4 fine sand) including 500x450mm
precast R.C.C. horizontal grating with
frame and vertical grating complete as per
standard design:-with class designation 35
bricks.

32.33.1.2 Constructing brick masonry chamber for each 89.55


underground C.I.inspection chamber and
bends with 35 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand) C.I. cover with frame (light duty)
455x610 mm internal dimensions, total
weight of cover with frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) R.C.C. top slab with
1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
foundation concrete 1:5:10 (1 cement : 5
coarse sand : 10 graded stone aggregate 40
mm nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement :3
coarse sand) finished smooth with a
floating coat of neat cement on walls and
bed concrete etc. complete as per standard
design - inside dimensions 455 x 610 mm and

Puducherry Region
32. Sewerage (Public Health)
Page No.: 929
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

45 cm deep for single pipe line. - With 35


class designation bricks.

32.33.2.2 Constructing brick masonry chamber for each 100.91


underground C.I.inspection chamber and
bends with 35 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand) C.I. cover with frame (light duty)
455x 610 mm internal dimensions, total
weight of cover with frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) R.C.C. top slab with
1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement :3
coarse sand) finished smooth with a
floating coat of neat cement on walls and
bed concrete etc. complete as per standard
design - inside dimensions 500 x 700 mm and
45 cm deep for pipe line with one or two
inlets.

32.33.3.2 Constructing brick masonry chamber for each 125.42


underground C.I.inspection chamber and
bends with 35 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand) C.I. cover with frame (light duty)
455x610 mm internal dimensions, total
weight of cover with frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) R.C.C. top slab with
1:2:4 mix (1 cement : 2 sand : 4 graded
stone aggregate 20 mm nominal size)
foundation concrete 1:5:10 (1 cement : 5
sand : 10 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement :3
sand) finished smooth with a floating coat
of neat cement on walls and bed concrete
etc. complete as per standard design -
inside dimensions 600 x 850 mm and 45 cm
deep for pipe line with three or more
inlets.

32.34.1.2 Extra for depth beyond 45 cm of brick metre 86.40


masonry chamber - for 455x610 mm size with
bricks of class designation 35.

Puducherry Region
32. Sewerage (Public Health)
Page No.: 930
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

32.34.2.2 Extra for depth beyond 45 cm of brick metre 94.62


masonry chamber - for 500x700 mm size with
bricks of class designation 35.

32.34.3.2 Extra for depth beyond 45 cm of brick metre 110.69


masonry chamber - for 600 x 850 mm size
with bricks of class designation 35.

32.35.1.2 Constructing brick masonry open surface metre 17.91


drain with bricks of class designation 35
in cement mortar 1 : 4 (1 cement : 4 fine
sand) including earth excavation, 10 cm
thick bed concrete 1 : 5 : 10 (1 cement : 5
fine sand : 10 graded stone aggregate 40 mm
nominal size and 25 mm thick cement
concrete 1 : 2 : 4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 12.5 mm
nominal size) for filling haunches
including 12 mm cement plaster 1 : 4 (1
cement : 4 coarse sand) with a floating
coat of neat cement inside the drain, its
top and exposed side including disposal of
surplus earth complete as per standard
design - 10 cm drain 20 cm average depth
with class designation 35 bricks.

32.35.2.2 Constructing brick masonry open surface metre 19.15


drain with class designation 35 in cement
mortar 1 : 4 (1 cement : 4 fine sand)
including earth excavation, 10 cm thick bed
concrete 1 : 5 : 10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm
nominal size and 25 mm thick cement
concrete 1 : 2 : 4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 12.5 mm
nominal size) for filling haunches
including 12 mm cement plaster 1 : 4 (1
cement : 4 coarse sand) with a floating
coat of neat cement inside the drain, its
top and exposed side including disposal of
surplus earth complete as per standard
design - 15 cm drain 20 cm average depth -
with brick class designation 35.

32.35.3.2 Constructing brick masonry open surface metre 25.43


drain with class designation 35 in cement
mortar 1:4 (1 cement : 4 fine sand)
including earth excavation, 10 cm thick bed
concrete 1:5:10 (1 cement : 5 fine sand :
10 graded stone aggregate 40 mm nominal
size and 25 mm thick cement concrete 1:2:4

Puducherry Region
32. Sewerage (Public Health)
Page No.: 931
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

(1 cement : 2 coarse sand : 4 graded stone


aggregate 12.5 mm nominal size) for filling
haunches including 12 mm cement plaster 1:4
(1 cement : 4 coarse sand) with a floating
coat of neat cement inside the drain, its
top and exposed side including disposal of
surplus earth complete as per standard
design - 25 cm drain 30 cm average depth -
with brick class designation 35.

32.39.2 Making soak pit 2.5m diameter 3.0 metre each 7.71
deep with 45x45cm dry brick honey comb
shaft with bricks of class designation 35
and S.W drain pipe 100mm diameter, 1.8m
long complete as per standard design -
with brick of class designation 35.

32.45.1 Construction of manhole with foundation no 393.43


concrete for 200 mm thick in 1:4:8 (one
cement, four sand and eight hard broken
granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks for 23 cm
thickness as shown in detailed drawing,
relieving arches in brick work in C.M. 1:4
(one cement and four sand) shall be turned
over pipes wherever it passes through
walls, top R.C.C. slab in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) for 150mm thick and fixing 560 mm dia
circular ductile iron manhole cover and
frame(NECO/ACL/AREACO) of heavy duty and
weight not less than 80 kg in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) and fixing of C.I. Steps all
as shown in drawings,but excluding cost
of CI steps. Inside and outside plastering
for 20mm thick with C.M. 1:3 (one cement
and three sand) in making channels and
benching as shown in drawings in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) rendered with C.M. 1:3 (one
cement and three sand) for 20mm thick
including curing and testing the manhole
for its water tightness. A drop in water
more than 50mm in 24 hours shall not be
permitted. The rate includes the cost of

Puducherry Region
32. Sewerage (Public Health)
Page No.: 932
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

D.I manhole cover with frame, centering,


shuttering and reinforcement with TMT
(TISCON / VIZAG / IISCO / SAIL)bars
excluding the cost of earthwork excavation.
- 800mm x 800mm x 1000mm deep

32.45.1A Extra/rebate for every additional / no 19.55


reduction in depth of 0.10 m in 23 cm thick
wall or part thereof for manhole of size.
- 800mm x 800mm x 1000mm deep.

32.45.2 Construction of manhole with foundation no 533.36


concrete for 200 mm thick in 1:4:8 (one
cement, four sand and eight hard broken
granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks for 23 cm
thickness as shown in detailed drawing,
relieving arches in brick work in C.M. 1:4
(one cement and four sand) shall be turned
over pipes wherever it passes through
walls, top R.C.C. slab in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) for 150mm thick and fixing 560 mm dia
circular ductile iron manhole cover and
frame (NECO/ACL/AREACO) of heavy duty and
weight not less than 80 kg in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) and fixing of C.I. Steps all
as shown in drawings,but excluding cost of
CI steps. Inside and outside plastering for
20mm thick with C.M. 1:3 (one cement and
three sand) in making channels and benching
as shown in drawings in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) rendered with C.M. 1:3 (one cement
and three sand) for 20mm thick including
curing and testing the manhole for its
water tightness. A drop in water more than
50mm in 24 hours shall not be permitted.
The rate includes the cost of D.I manhole
cover with frame, centering, shuttering and
reinforcement with TMT (TISCON / VIZAG /
IISCO / SAIL)bars excluding the cost of
earthwork excavation. - 900mm x 1200mm x
1000mm deep

Puducherry Region
32. Sewerage (Public Health)
Page No.: 933
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

32.45.2A Extra/rebate for every additional / no 25.09


reduction in depth of 0.10 m in 23 cm thick
wall or part thereof for manhole of size -
900mm x 1200mm x 1000mm deep.

32.45.3 Construction of manhole with foundation no 808.59


concrete for 300 mm thick in 1:4:8 (one
cement, four sand and eight hard broken
granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks in the 23 cm up to
1.50 m from ground level and exceeding 1.50
m 34 cm thickness as shown in detailed
drawing, relieving arches in brick work in
C.M. 1:4 (one cement and four sand) shall
be turned over pipes wherever it passes
through walls, top R.C.C. slab in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) for 150mm thick and fixing
560 mm dia circular ductile iron manhole
cover and frame (NECO/ACL/AREACO) of heavy
duty and weight not less than 80 kg in
cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) and fixing of C.I.
Steps all as shown in drawings,but
excluding cost of CI steps. Inside and
outside plastering for 20mm thick with C.M.
1:3 (one cement and three sand) in making
channels and benching as shown in drawings
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) rendered with C.M.
1:3 (one cement and three sand) for 20mm
thick including curing and testing the
manhole for its water tightness. A drop in
water more than 50mm in 24 hours shall not
be permitted. The rate includes the cost
of D.I manhole cover with frame, centering,
shuttering and reinforcement with TMT
(TISCON / VIZAG / IISCO / SAIL)bars
excluding the cost of earthwork excavation.
- 900mm x 1200mm x 1600mm deep

32.45.3A Extra/rebate for every additional / no 32.95


reduction in depth of 0.10 m in 34 cm thick
wall or part thereof for manhole of size -
900mm x 1200mm x 1600mm deep.

Puducherry Region
32. Sewerage (Public Health)
Page No.: 934
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

32.45.4 Construction of manhole with foundation no 951.95


concrete for 300 mm thick in 1:4:8 (one
cement, four sand and eight hard broken
granite stone aggregate of 40 mm nominal
size), side walls in brick work in C.M. 1:4
(one cement and four sand) using best
available country bricks in the 23 cm up to
1.50 m from ground level and exceeding 1.50
m 34 cm thickness as shown in detailed
drawing, relieving arches in brick work in
C.M. 1:4 (one cement and four sand) shall
be turned over pipes wherever it passes
through walls, top R.C.C. slab in cement
concrete 1:1.5:3 (one cement ,one and half
sand and three HBG stone aggregate of 20 mm
nominal size) for 150mm thick and fixing
560 mm dia circular ductile iron manhole
cover and frame (NECO/ACL/AREACO) of heavy
duty and weight not less than 80 kg in
cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) and fixing of C.I.
Steps all as shown in drawings,but
excluding cost of CI steps. Inside and
outside plastering for 20mm thick with C.M.
1:3 (one cement and three sand) in making
channels and benching as shown in drawings
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) rendered with C.M.
1:3 (one cement and three sand) for 20mm
thick including curing and testing the
manhole for its water tightness. A drop in
water more than 50mm in 24 hours shall not
be permitted. The rate includes the cost
of D.I manhole cover with frame, centering,
shuttering and reinforcement with TMT
(TISCON / VIZAG / IISCO / SAIL)bars
excluding the cost of earthwork excavation.
- 900mm x 1200mm x 2100mm deep

32.45.4A Extra/rebate for every additional / no 32.95


reduction in depth of 0.10 m in 34 cm thick
wall or part thereof for manhole of size -
900mm x 1200mm x 2100mm deep.

32.45.5 Construction of circular manhole of 1.40m no 1,373.28


internal diameter and to the depth detailed
below with R.C.C. kerb in 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) with

Puducherry Region
32. Sewerage (Public Health)
Page No.: 935
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

a overall size of 500 x 340 mm and shaped


at bottom as shown in drawing to receive
M.S. angle of size 100 x 100 x 10 mm as
cutting edge, with reinforcement not less
than 70 kg as indicated in drawing, and
with vertical rods of 12 mm diameter at 60
cm c/c, 120 cm long to bind the steining
wall and kerb, bottom plugging to a depth
of 0.50 m with plain cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) with walls as detailed below.
Providing relieving arch over the sewer
pipe wherever it passes through the walls
of the manholes, fixing of C.I.
Rungs,excluding cost of CI rungs, fixing of
D.I. manhole cover and frame
(NECO/ACL/AREACO) of heavy duty of size 560
mm diameter and weight not less than 80 kg
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) all shown in
drawing, the rate includes cost of manhole
cover with frame, centering, shuttering and
reinforcement with TMT(TISCON / VIZAG /
IISCO / SAIL) bars excluding the cost of
earth work excavation. Plastering both
inside and outside for 20 mm thick with CM
1:3 (one cement and three sand) and making
channels in cement concrete 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) all
as shown in drawing , rendered with cement
mortar 1:3 (one cement and three sand) for
20 mm thick etc., complete including curing
and testing the manhole for water
tightness. A drop in water level more than
50 mm in 24 hours will not be permitted -
For Manhole 2.5m deep with wall of 23cm
thick upto 1.5m and 34cm thick for depth
greater than 1.5m of brick masonry using
best available country bricks in cement
mortar 1:4 (1 cement & 4 sand).

32.45.5A Extra/rebate for every additional/reduction no 32.68


in depth of 0.10m or part thereof in 34cm
thick wall for the circular manhole of
1.40m internal dia. and 2.5m deep.

32.45.6 Construction of circular manhole of 1.40m no 2,991.89


internal diameter and to the depth detailed

Puducherry Region
32. Sewerage (Public Health)
Page No.: 936
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

below with R.C.C. kerb in 1:1.5:3 (one


cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) with
a overall size of 500 x 340 mm and shaped
at bottom as shown in drawing to receive
M.S. angle of size 100 x 100 x 10 mm as
cutting edge, with reinforcement not less
than 70 kg as indicated in drawing, and
with vertical rods of 12 mm diameter at 60
cm c/c, 120 cm long to bind the steining
wall and kerb, bottom plugging to a depth
of 0.50 m with plain cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) with walls as detailed below.
Providing relieving arch over the sewer
pipe wherever it passes through the walls
of the manholes, fixing of C.I.
Rungs,excluding cost of CI rungs, fixing of
D.I. manhole cover and frame
(NECO/ACL/AREACO) of heavy duty of size 560
mm diameter and weight not less than 80 kg
in cement concrete 1:1.5:3 (one cement ,one
and half sand and three HBG stone aggregate
of 20 mm nominal size) all shown in
drawing, the rate includes cost of manhole
cover with frame, centering, shuttering and
reinforcement with TMT(TISCON / VIZAG /
IISCO / SAIL) bars excluding the cost of
earth work excavation. Plastering both
inside and outside for 20 mm thick with CM
1:3 (one cement and three sand) and making
channels in cement concrete 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) all
as shown in drawing , rendered with cement
mortar 1:3 (one cement and three sand) for
20 mm thick etc., complete including curing
and testing the manhole for water
tightness. A drop in water level more than
50 mm in 24 hours will not be permitted -
For manhole 5m deep with wall 23 cm thick
upto 1.5m and 34 cm thick for depth from
1.5m and upto 2.8m and 45cm thick for depth
greater than 2.8m of brick masonry using
best available country bricks in cement
mortar 1:4 (1 cement and 4 sand).

32.45.6A Extra/rebate for every no 31.73


additional/reduction in depth of 0.10m or
part thereof in 34cm thick wall for the

Puducherry Region
32. Sewerage (Public Health)
Page No.: 937
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

circular manhole of 1.40m internal dia. and


5.0m deep.

32.45.7 Construction of flushing tank of internal no 882.60


size 2000 x 1200 x 1000 mm deep with R.C.C.
top slab of 150 mm thick in R.C.C 1:1.5:3
(one cement ,one and half sand and three
HBG stone aggregate of 20 mm nominal size)
with reinforcement as shown in detailed
drawing, foundation concrete of 200 mm
thick in 1:4:8 (one cement, four sand and
eight hard broken granite stone aggregate
of 40 mm nominal size) with 230 mm thick
wall in brick masonry using country bricks
in CM 1:4 (one cement and four sand) inside
and outside plastering with 20 mm thick CM
1:3 (one cement and three sand) making
flooring for 40 mm thick in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) and rendered with CM 1:3 (one cement
and three sand) 20 mm thick ,conveying and
fixing circular ductile iron manhole cover
and frame (NECO/ACL/AREACO) of heavy duty
of size of 560 mm diameter and weight not
less than 80 kg in cement concrete 1:1.5:3
(one cement ,one and half sand and three
HBG stone aggregate of 20 mm nominal size)
(all as shown in drawing ) providing and
fixing of C.I. pipes and specials for
flushing pipe of 200 mm diameter and
overflow pipe of 150 mm diameter conforming
to IS 1536 and IS 1538, jointing of socket
and spigot of C.I. pipes and specials shall
be in molten lead and encasing them in CC
1:4:8 (one cement, four sand, eight HBG
metal) block of size 1000 x 600 x 800
mm.The cost includes curing and testing
the flushing tank for its water tightness.
A drop in water more than 50mm in 24 hours
shall not be permitted. The rate includes
the cost of D.I manhole cover with frame,
centering, shuttering and reinforcement
with TMT(TISCON / VIZAG / IISCO / SAIL)
bars, but excluding the cost of earth work
excavation.

32.45.7A Extra/rebate for every additional/reduction no 47.64


in depth of 0.10m or part thereof in 23cm
thick wall for the flush tank of size
2000x1200x1000mm deep.

Puducherry Region
32. Sewerage (Public Health)
Page No.: 938
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

32.46.1 Construction of intercepting chamber of the no 357.57


size 600 x 850 x 1100 mm deep with R.C.C.
top slab of 100mm thick in R.C.C 1:1.5:3
(one cement ,one and half sand and three
HBG stone aggregate of 20 mm nominal size)
as shown in drawings, foundation in PCC
1:4:8 mix (one cement, four sand and eight
hard broken granite stone aggregate of 40
mm nominal size), side wall of 23 cm thick
in brick, inside and outside plastering
with 20 mm thick in CM 1:3 (one cement and
three sand) and making channel for house
service connection in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size) rendered with CM 1:3 (one cement and
three sand) 20mm thick complete. Conveying
and fixing of rectangular ductile iron
manhole cover and frame (NECO/ACL/AREACO)
of medium duty size 450 x 600 mm and weight
not less than 70 kg in cement concrete
1:1.5:3 (one cement ,one and half sand and
three HBG stone aggregate of 20 mm nominal
size).The cost includes curing and testing
of the intercepting chamber for its water
tightness. A drop in water more than 50 mm
in 24 hours shall not be permitted. The
rate includes cost of rectangular D.I cover
with frame, centering, shuttering and
reinforcement with TMT(TISCON / VIZAG /
IISCO / SAIL) bars,but excluding the cost
of earth work excavation.

32.46.1A Extra/rebate for every additional/reduction no 18.75


in depth of 0.10m or part thereof in 23cm
thick wall for the intercepting chamber of
size 600x850x1100mm deep

32.47.1 Making C.I. vent shaft using 150 mm no 115.80


diameter C.I class LA conforming to IS 1536
with C.I cowl / wire guard balloon at top,
having an over all length of 5.50 m long
and fixing from bottom and overflow pipe
size of 150mm dia,extending to a depth of
1.25 m below ground level, with C.I. bend
of 150 mm dia medium class conforming to IS
1538 at bottom and resting over the CC
block of size 650 x 650 x 250 mm in
1:4:8 mix (one cement, four sand and eight
hard broken granite stone aggregate of 40
mm nominal size) encasing all round the

Puducherry Region
32. Sewerage (Public Health)
Page No.: 939
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

pipe with CC 1:4:8 mix (one cement, four


sand and eight hard broken granite stone
aggregate of 40 mm nominal size) to form a
block of 650 x 650 x 1000 mm and top is
finishing with cement concrete 1:1.5:3 (one
cement ,one and half sand and three HBG
stone aggregate of 20 mm nominal size) for
250 mm thick including fixing of M.S.
foundation bolts and nuts of 20 mm
diameter and 600 mm long with split up end
and bottom to receive the C.I. pedestal of
175 mm internal diameter and 600 mm height
and weight not less than 150kg to join
above and below ground level.The rate
includes the cost of C.I. specials and C.I.
Pedestal etc.,complete.

32.47.2 Fixing of 150 mm wide cast iron steps in no 3.20


the manholes with 200 x 200 x 100 mm CC
block in cement concrete 1:1.5:3 (one
cement ,one and half sand and three hard
broken granite stone aggregate of 20 mm
nominal size) all as shown in drawings.

32.48.1 Jointing the C.I./D.I. pipes with manhole no 25.40


including dismantling of brick work to the
required extent and making good the angular
space with brick work in CM 1:3 (one cement
and three sand) and encasing with cement
concrete 1:1.5:3 (one cement ,one and half
sand and three hard broken granite stone
aggregate of 20 mm nominal size) etc.
complete. - 450 mm dia pipe.

32.48.2 Jointing the C.I./D.I. pipes with manhole no 35.40


including dismantling of brick work to the
required extent and making good the angular
space with brick work in CM 1:3 (one cement
and three sand) and encasing with cement
concrete 1:1.5:3 (one cement ,one and half
sand and three hard broken granite stone
aggregate of 20 mm nominal size) etc.
complete. - 600 mm dia pipe.

32.50.1A Raising of intercepting chamber by no 97.24


dismantling the old R.C.C. slab, removing
the I.C. cover and frame from the chamber
and raising the chamber height with brick
work in cement mortar 1:4 (one cement and
four sand), refixing the frame in position
by laying reinfoced cement concrete 1:1.5:3

Puducherry Region
32. Sewerage (Public Health)
Page No.: 940
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

(One cement one and half sand and three HBG


metal) including curing but excluding the
cost of reinforcement, finishing the top,
inside and outside plastering with 20mm
thick in cement mortar 1:3(one cement three
sand), the rate includes all materials,
providing barricading,caution board, watch
and ward etc.,complete till the completion
of work with minimum hindrance to the
traffic.- 30cm height.

32.50.1B Raising of various types of manholes and no 72.05


flushing tank by cutting alround the
manhole cover, removing the frame and cover
from the manhole by cutting the B.T.,
W.B.M., surface, raising the manhole to
the required height with brick work in
cement motar 1:4 (One cement and four
sand), refixing the frame in position by
laying cement concrete 1:1.5:3 (One cement
one and half sand and three 20mm HBG metal)
including curing, but excluding the cost of
reinforcement, finishing the top, inside
and outside plastering with 20mm thick in
cement mortar 1:3(one cement three sand),
the rate includes all materials, providing
barricading,caution board, watch and ward
etc.,complete till the completion of work
with minimum hindrance to the traffic.-
30cm height.

32.51.1 Providing salt glazed stoneware pipe with metre 2.26


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 100 mm dia

32.51.1A Providing salt glazed stoneware pipe with metre 2.26


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the

Puducherry Region
32. Sewerage (Public Health)
Page No.: 941
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

joint by means of caulking tool and filled


the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 150 mm dia

32.51.1B Providing salt glazed stoneware pipe with metre 3.26


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 200 mm dia

32.51.1C Providing salt glazed stoneware pipe with metre 3.83


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 250 mm dia

32.51.1D Providing salt glazed stoneware pipe with metre 5.00


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed
round the joints and inserted into the
joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 300 mm dia

32.51.1E Providing salt glazed stoneware pipe with metre 10.60


spigot and sockets ends, conforming to IS
651 with standard length of 60 cm, laying
to level or slope to the depth required and
jointing with spun yarn soaked with cement
slurry or tarred gasket shall be passed

Puducherry Region
32. Sewerage (Public Health)
Page No.: 942
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

round the joints and inserted into the


joint by means of caulking tool and filled
the joint with stiff mixture of CM in
proportion 1:1 (one cement and one
sand),including the cost of testing the
pipe, joints etc., complete. - 375 mm dia

32.52.1A Providing stoneware specials - `Y' junction no 1.36


with spigot and socket ends conforming to
I.S.651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked
with cement slurry or tarred gasket shall
be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
150 x 150 mm 'Y'

32.52.1B Providing stoneware specials - `Y' junction no 1.96


with spigot and socket ends conforming to
I.S. 651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked
with cement slurry or tarred gasket shall
be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
200 x 150 mm 'Y'

32.52.1C Providing stoneware specials - `Y' junction no 2.30


with spigot and socket ends conforming to
I.S. 651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked
with cement slurry or tarred gasket shall
be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
250 x 150 mm 'Y'

32.52.1D Providing stoneware specials - `Y' junction no 3.00


with spigot and socket ends conforming to
I.S. 651 with a standard length of 60 cm,
laying to level or slope to the depth
required and jointing with spun yarn socked

Puducherry Region
32. Sewerage (Public Health)
Page No.: 943
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

with cement slurry or tarred gasket shall


be passed round the joints by means of
caulking tools and filled the joint with
stiff mixture of CM in proportion 1:1 (one
cement and one sand),including the cost of
testing the pipe, joints etc, complete -
300 x 150 mm 'Y'

Puducherry Region
33. Miscellaneous (Public Health)
Page No.: 944
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

33.9.2 Cutting holes upto 30 x 30 cm in walls each 2.89


including making good the same with bricks
of class designation 35.

33.15 Making chases upto 7.5x7.5 cm in walls metre 0.88


including making good after housing G.I.
pipe etc.

Puducherry Region
7. Culverts
Page No.: 945
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

7.1A.MO Cement concrete 1:4:8 mix with stone cum 170.00


aggregate 40mm nominal size in foundation
upto a depth of 1.5 metres below ground
level and upto height of 1.5 above
ground/bed level.

7.1B.MO Cement concrete 1:3:6 mix with stone cum 220.00


aggregates 20mm nominal size mechanically
mixed and vibrated in foundation upto a
depth of 1.5 metres below ground level and
1.5 metres ground/bed level.

7.2.MO Plain cement concrete m-15 mix with stone cum 330.00
aggregates 20mm nominal size mechanically
mixed and vibrated in foundation upto a
depth of 1.50 metres below ground level
and/or 1.50 metres above ground/bed level.

7.3.MO Plain cement concrete m-15 mix with stone cum 330.00
aggregates 20mm nominal size mechanically
mixed and vibrated in superstructure upto
4.00 metre above, 1.50 metre from
ground/bed level.

7.4.MO Reinforced cement concrete m-20 mix with cum 400.00


stone aggregate 20mm nominal size
mechanically mixed and vibrated for
reinforced concrete work in slab excluding
steel reinforcement, but including
centering and shuttering, laid in position.

7.5.MO Reinforced cement concrete m-20 mix with cum 400.00


stone aggregate 20mm nominal size
mechanically mixed and vibrated for bed
plates exlcuding steel reinforcement, but
including centering and shuttering, laid in
position.

7.7.MO First class brick in cement mortar 1:3 upto cum 107.00
a depth of 1.50 metres below ground and
above 1.50 from bed/ground level.

7.9.MO Brick or edge flooring with 1st class sqm 11.40


bricks including cement slurry in cement
sand mortar 1:4.

7.10.MO Coursed rubble stone masonry in cement sand cum 153.00


mortar 1:3 in foundation upto a depth of
1.50 metres and also 1.50 metres above

Puducherry Region
7. Culverts
Page No.: 946
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

ground/bed level.

7.12.MO Randum rubble masonry (coursed) in cement cum 168.50


sand mortar 1:3 in foundation upto a depth
of 1.50 metres and 1.50 above ground/bed
level.

7.14.MO Cement pointing 1:2 deep variety (cut or sqm 2.00


weather) on brick and tile work.

7.15.MO Cement pointing 1:2 flush on brick on edge sqm 2.25


floor.

7.16.MO Cement plaster 12mm thick in cement mortar sqm 7.50


1:3

7.17.MO Laying reinforced cement concrete pipes metre 5.00


NP-3 for culverts including pointing ends
and fixing collar with cement mortar 1:2 -
900mm dia.

7.18.MO Laying reinforced cement concrete pipes metre 6.80


NP-3 for culverts including pointing ends
and fixing collar with cement mortar 1:2 -
1200mm dia.

7.19.MO Rubble stone laid in cement sand mortar 1:3 cum 168.50
in flooring.

7.24.MO Reinforced cement concrete M30 mix with cum 450.00


minimum cement content 450 kg /cum using
stone aggregate 20 mm nominal size
mechanically mixed and vibrated for
reinforced concrete work in slab excluding
steel reinforcement, but including
centering and shuttering, laid in position.

7.28.MO Boring, providing and installing bored cast metre 313.92


-in-situ reinforced cement concrete pile of
specified diameter using approved drilling
method to the required depth up to the cut
off level in pile cap in RCC M20 grade with
a minimum cement content of 400 kg / cum
using Blue metal of 20mm and down gauge to
carry a safe working load not less than the
specified, excluding the cost of steel
reinforcement but including the cost of
boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The

Puducherry Region
7. Culverts
Page No.: 947
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cost shall include the cost of dismantling


of laitenance / week concrete as per BIS
norms, removal of dismantled debris and the
waste bore mug from the site . The rate
shall include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) -1000 mm dia pile.

7.29.MO Boring, providing and installing bored cast metre 176.58


-in-situ reinforced cement concrete pile of
specified diameter using approved drilling
method to the required depth up to the cut
off level in pile cap in RCC M20 grade with
a minimum cement content of 400 kg / cum
using Blue metal of 20mm and down gauge to
carry a safe working load not less than the
specified, excluding the cost of steel
reinforcement but including the cost of
boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debris and the
waste bore mug from the site . The rate
shall include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) -750 mm dia pile.

Puducherry Region
4. Granular Sub-base
Page No.: 948
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

4.5 Providing, Laying and spreading soil on a cum 70.00


prepared sub-grade, pulverising, adding the
designed quantity of cement to the spread
soil ,mixing in place with rotavator,
grading with the motor grader and
compacting with the road roller at OMC to
achieve the desired unconfined compressive
strength and to form a layer of sub-base /
base. (As per MoRTH specification, 4th
Revision)

4.6.1 Providing, Laying and spreading material on cum 80.00


a prepared sub-grade, adding the designed
quantity of cement to the spread material,
mixing in place with rotavator, grading
with the motor grader and compacting with
the road roller at OMC to achieve the
desired unconfined compressive strength and
to form a layer of sub-base. Grading of
material for sub-base course. (As per MoRTH
specification, 4th Revision)

4.6.2 Providing, Laying and spreading material on cum 80.00


a prepared sub-grade, adding the designed
quantity of cement to the spread material,
mixing in place with rotavator, grading
with the motor grader and compacting with
the road roller at OMC to achieve the
desired unconfined compressive strength and
to form a layer of base. Grading of
material for base course. (As per MoRTH
specification, 4th Revision)

4.16 Construction of footpath / separator by sqm 12.36


providing a 150mm compacted granular
sub-base as per clause 401 and 25mm thick
cement concrete grade M15, overlaid with
precast concrete tiles in cement mortor 1:3
including provision of all drainage
arrangements but excluding kerb channel.
(As per MoRTH specification, 4th Revision)

Puducherry Region
6. Cement Concrete Pavement
Page No.: 949
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

6.1 Construction of dry lean cement concrete cum 150.00


Sub-base over a prepared sub - grade with
coarse and fine aggregate conforming to
IS:383, the size of coarse aggregates not
exceeding 25 mm, aggregate cement ratio not
to exceed 15:1,aggregate gradation after
blending to be as per Table 600-1, cement
content not to be less than 150 kg /cum,
optimum moisture content to be determined
during trial length construction, concrete
strength not to be less than 10 Mpa at 7
days, mixed in a batching plant,
transported to site , laid with a paver
with electronic sensor, compacting with
8-10 tonne vibratory roller, finishing and
curing.

6.2 Construction of un-reinforced, dowel cum 394.28


jointed, plain cement concrete pavement
over a prepared sub-base with 43 grade
cement @ 400 kg per cum, coarse and fine
aggregate conforming to IS 383, maximum
size of coarse aggregate not exceeding 25
mm, mixed in a batching and mixing plant as
per approved mix design,transported to
site, laid with a fixed form or slip form
paver, spread, compacted and finished in a
continuous operation including provision of
contraction,expansion, construction and
longitudinal joints, joint filler,
separation membrane,sealant primer,joint
sealant, debonding strip,dowel bar,tie rod,
admixtures as approved, curing compound,
finishing to lines and grades as per
drawing.

6.3 Construction of rolled cement concrete base cum 200.00


course with coarse and fine aggregate
conforming to IS :383, the size of coarse
aggregate not exceeding 25mm with minimum,
aggregate cement ratio 15:1 and minimum
cement content of 200 kg/cum, aggregate
gradation to be as per Table 600-4 after
blending, mixing in batching plant at
optimum moisture content, transporting to
site, laying with a paver with electronic
sensor, compacting with 8-10tonnes smooth
wheeled vibratory roller to achieve, the
designed flexural strength finishing and
curing.

Puducherry Region
6. Cement Concrete Pavement
Page No.: 950
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

6.5 Construction of base/sub-base using cum 150.00


cement,sand,flyash and coarse aggregates
proportioned as per table 4 of IRC:74-1979
and with water content ratio, slump and
compressive strength as defined in the said
table, mix prepared in a batching and
mixing plant and compacted with a vibratory
roller 8-10 tonnes capacity within the time
limit laid down vide Clause 7.6.3 of
IRC:74-1979, construction joints properly
formed at the end of day's work, cured for
14 days, all as specified in IRC:74-1979
and as per approved plans.

6.6 Construction of un-reinforced, dowel cum 340.00


jointed, plain cement concrete pavement
over a prepared sub-base with 43 grade
cement, coarse and fine aggregate
conforming to IS:383, maximum size of
coarse aggregate not exceeding 25mm,
replacing cement by flyash to the extent of
15% and sand by 10%, mixed in a batching
and mixing plant as per approved mix
design, transported to site, laid with a
fixed form or slip form paver spread,
compacted and finished in a continuous
operation including provision of
contraction, expansion, construction and
longitudinal joints, joint filler,
separation membrane,sealant primer, joint
sealant, debonding strip, dowel bar, tie
rod, admixtures as approved, curing
compound, finishing to lines and grades as
per drawing.

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 951
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

8.1A Construction of cement concrete kerb with Rmt 15.83


top and bottom width 115 & 165 mm
respectively, 250mm high in M20 Grade PCC
on M10 grade foundation 150mm thick,
foundation having 50mm projection beyond
kerb stone, kerb stone laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete mixer)

8.1B Construction of cement concrete kerb with Rmt 15.83


top and bottom width 115 & 165 mm
respectively, 250mm high in M20 Grade PCC
on M10 grade foundation 150mm thick,
foundation having 50mm projection beyond
kerb stone, kerb stone laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete batching and mixing plant)

8.2A Construction of cement concrete kerb with Rmt 30.03


channel with top and bottom width 115 & 165
mm respectively, 250mm high in M20 Grade
PCC on M10 grade foundation 150mm thick,
kerb channel 300mm wide, 50 mm thick in
PCC M20 grade, sloped towards the kerb,
kerb stone with channel laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete mixer)

8.2B Construction of cement concrete kerb with Rmt 30.03


channel with top and bottom width 115 & 165
mm respectively, 250mm high in M20 Grade
PCC on M10 grade foundation 150mm thick,
kerb channel 300mm wide, 50 mm thick in
PCC M20 grade, sloped towards the kerb,
kerb stone with channel laid with kerb
laying machine, foundation concrete laid
manually, all complete as per Clause 408
(Using concrete batching and mixing plant)

8.4A Providing and fixing of retro - each 39.60


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm (3.8 mtrs height -
6.8kg/mtr = 25.84kg , with board support

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 952
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

angle 35x35x6mm - 3.5 mtrs 3kg/mtr =


10.5kg and anchor flats 0.5kg) firmly fixed
to the ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 90 cm
equilateral triangle . (including cost of
angle iron towards cost of drilling holes ,
nuts , bolts etc.,)

8.4B Providing and fixing of retro - each 39.60


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.5 mtrs height -
6.8kg/mtr = 23.8kg , with board support
angle 35x35x6mm-2.30 mtrs - 3kg/mtr =
6.9kg and anchor flat - 0.5kg)firmly fixed
to the ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 60 cm
equilateral triangle . (including cost of
angle iron towards cost of drilling holes ,
nuts , bolts etc.,)

8.4C Providing and fixing of retro - each 39.60


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.6 mtrs height -
6.8kg/mtr = 24.48 kg with board support
angle 35x35x6mm - 2.49 mtrs - 3kg/mtr =
7.47kg and anchor flat -0.50kg )firmly
fixed to the ground by means of properly
designed foundation with M15 Grade cement
concrete 45 cm X 45 cm X 60 cm , 60cm below
ground level as per approved drawing. -
60cm Circular .(including cost of angle
iron towards cost of drilling holes , nuts
, bolts etc.,)

8.4D Providing and fixing of retro - each 39.60


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 953
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

aluminium sheet encapsulated lens with high


intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.8 mtrs height -
6.8kg/mtr = 25.84 kg with board support
angle 35x35x6mm - 2.8 mtrs - 3kg/mtr =
8.4kg and anchor flats - 0.5kg ) firmly
fixed to the ground by means of properly
designed foundation with M15 Grade cement
concrete 45 cm X 45 cm X 60 cm , 60cm below
ground level as per approved drawing. -
80cm X 60cm rectangular . (including cost
of angle iron towards cost of drilling
holes , nuts , bolts etc.,)

8.4E Providing and fixing of retro - each 39.60


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm (3.6 mtrs height -
6.8kg/mtr = 24.48kg , with board support
angle 2.10 mtrs - 3kg/mtr = 6.3 kg and
anchor flat 0.50kg)firmly fixed to the
ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 60 cm X
45cm rectangular . (including cost of angle
iron towards cost of drilling holes , nuts
, bolts etc.,)

8.4F Providing and fixing of retro - each 39.60


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm ( 3.6 mtrs -
6.8kg/mtr = 24.48kg , with board support
angle 35x35x6mm 2.4mtrs - 3kg / mtr =7.2kg
and anchor flat 0.50kg )firmly fixed to the
ground by means of properly designed
foundation with M15 Grade cement concrete
45 cm X 45 cm X 60 cm , 60cm below ground
level as per approved drawing. - 60 cm X
60cm square . (including cost of angle iron

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 954
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

towards cost of drilling holes , nuts ,


bolts etc.,)

8.4G Providing and fixing of retro - each 39.60


reflectorised cautionary, mandatory &
informatory sign as per IRC:67 made of
aluminium sheet encapsulated lens with high
intensity grade sheeting vide Clause 801.3,
fixed over aluminium sheeting, 1.5 mm thick
supported on a mild steel angle iron post
75 mm X 75 mm X 6 mm (3.90 mtrs height -
6.8kg / mtr = 26.52kg , with board support
angle 35x35x6mm 2.88 mtrs - 3kg/mtr =
8.64kg and anchor flat - 0.50 kg)firmly
fixed to the ground by means of properly
designed foundation with M15 Grade cement
concrete 45 cm X 45 cm X 60 cm , 60cm below
ground level as per approved drawing. - 90
cm high octagon . (including cost of angle
iron towards cost of drilling holes , nuts
, bolts etc.,)

8.5 Providing and erecting direction and place sqm 44.00


identification retro-reflectorised sign as
per IRC:67 made of aluminium sheet
encapsulated lens reflective ( diamond
grade sheet) with high intensity grade
sheeting vide Clause 801.3, fixed over
aluminium sheeting, 2mm thick with area not
exceeding 0.9sqm supported on a mild steel
single angle iron post 75 X 75 X 6mm
(3.9mtrs height - 6.8kg/mtr = 26.52kg ,with
board support angle 35x35x6mm - 3.8mtrs -
3kg/mtr = 11.40kg and anchor flat 0.50kg
)firmly fixed to the ground by means of
properly designed foundation with M15 grade
cement concrete 45 X 45 X 60 cm, 60cm below
ground level.

8.6 Providing and erecting direction and place sqm 52.80


identification retro-reflectorised sign as
per IRC:67 made of aluminium sheet
encapsulated lens reflective sheet (diamond
grade ) with high intensity grade sheeting
vide Clause 801.3, fixed over aluminium
sheeting, 2mm thick with area not exceeding
0.9sqm supported on a mild steel angle iron
post 75 X 75 X 6mm , (3.5 mtrs height x2
mtrs) = 7mtrs x 6.8kg/mtr =47.60kg, with
board support angle 35x35x6mm
3mtrs-3.5kg/mtr = 10.50kg with anchor flats

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 955
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

-0.50kg)2 nos firmly fixed to the ground by


means of properly designed foundation with
M15 grade cement concrete 45 X 45 X 60 cm,
60cm below ground level.

8.11.3A Supplying and fixing of cantilever type each 184.32


destination sign boards with diamond graded
reflective sheeting in rectangular shape of
size 1.20 m x 0.9 m of double sided board
including the cost and conveyance of
reflective sheeting and providing symbols
and letterings by high intensity grade
reflective white sheeting fixed over the
aluminium plates of all sizes not less than
2 mm thick suitably framed and supported by
M.S. angles of size 40 mm X 40 mm X 6 mm
with required bolt and nuts. The
rectangular board is fixed in the post pipe
of 100 mm dia M.S. Heavy vertically 4.8 mts
height and horizontally 1.2 m and both the
vertical and horizontal are connected by a
100 mm dia M.S. heavy bend with inner
support sleeves welded firmly and a base
plate of size 30 cm X 30 cm welded at the
bottom with necessary anchoring supports.
The board and the post pipe are connected
by 32 mm dia M.S. pipe with suitable bolts
and clamps of 12 cm
length by horizontally 3 places and
vertically 2 places and a cross tie flat is
provided at the bottom of the board with
pipe post to hold the hanging strength.
Finally the board frame and the post pipe
are painted by Zinc chromate primer and
aluminium paint and embedded in ground pit
of size 0.8m X 0.8 m X 0.9 m with PCC 1:2:4
complete

8.11.3B Fabrication, supply and fixing of each 69.12


informatory board of size 1.2 m X 0.6 m of
diamond graded reflective sheeting
encapsulated on aluminium sheets of not
less than 2 mm thick suitably supported and
framed by M.S angles of size 40 mm X 40 mm
X 6mm. The informatory lettering and the
symbols will be provided by high intensity
white grade white sheeting. The board is
supported by a post pipe of size 80 mm dia
M.S. heavy for a height of 3.6 m and
extended and supported to the extreme width
of the board on the rear side. This board

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 956
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

frames and post pipes will be painted by


Zinc chromate primer and white colour
enamel paint and embedded in ground pit of
size 0.6m X 0.6 m X 0.6 m with PCC 1:2:4.
Rate includes all materials, labour charges
conveyance concreting, painting

8.14A Reinforced cement concrete M15 grade Nos 129.25


kilometre stone of standard design as per
IRC:8-1980,fixing in position including
painting and printing etc-5th kilometre
stone(precast)

8.14B Reinforced cement concrete M15 grade Nos 88.86


kilometre stone of standard design as per
IRC:8-1980,fixing in position including
painting and printing etc-ordinary
kilometre stone(precast)

8.14C Reinforced cement concrete M15 grade Nos 15.80


kilometre stone of standard design as per
IRC:8-1980,fixing in position including
painting and printing etc-Hectometre
stone(precast)

8.16 Reinforced cement concrete M15 grade each 7.23


boundary pillars of standard design as per
IRC:25-1967, fixed in position including
finishing and lettering but excluding
painting.

8.20 Providing, fixing and erecting 50mm dia Rmt 21.38


steel pipe railing in 3 rows duly painetd
on medium weight steel channels (ISMC
series) 100 mmX 50 mm, 1.2 metre high above
ground, 2m center to centre, complete as
per approved drawings.

8.21 Providing, fencing and erecting 50mm dia Rmt 21.38


painted steel pipe railing in 3 rows on
precast M20 grade RCC vertical posts 1.8
metre high (1.2 m above GL) with 3 holes 50
mm dia pipe,fixed 2 metre centre to,
complete as per approved drawing.

8.25 Supply and installation of solar powered each 96.00


LED Amber blinkers 24 hours operation with
Ultra bright Amber/ Red Solid State LED's.
the operating voltage is 24 V and the
battery and the LED's array enclosure is
300 mm dia with protection glass. The

Puducherry Region
8. Traffic Signs,Markings & Other Road Appurtenances
Page No.: 957
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

system shall blink 30 blinks per minute.


Battery shall be of SMF and expected life
shall be 2 years and panel life shall be
expected 10 years. The visibility shall be
800 mts. The blinker shall be fixed in G.I.
pipe class B of 4" dia reduced to 3" dia
G.I.pipe class B. the rate shall include
fixing below ground level of 1.20mts depth
embedded in CC 1:2:4 of size 50 cm X 50 cm,
pipe painted with primer and two or more
coat enamel paint of required colour all as
directed

8.30 Tile work in skiriting raising of steps and Sqm 10.44


dado (upto 2m height ) over 12 mm thick bed
of cement mortar 1:3 (1 cement : 3 sand )
and jointed with grey cement slurry at
3.3kg / 1sqm, including grooves joints 10mm
wide and 10mm deep on all sides of tiles
etc., complete flamed granite tiles 10mm
thick.

Puducherry Region
9. Pipe Culverts
Page No.: 958
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

9.1 Plain cement concrete 1:3:6 mix with cum 220.00


crushed stone aggregate 40mm nominal size
mechanically mixed, placed in foundation
and compacted by vibration including curing
for 14 days.

9.2A Laying reinforced cement concrete pipe Np4/ metre 4.00


prestressed concrete pipe for culverts on
first class bedding of granular material in
single row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works, backfilling,concrete and
masonry works in head walls and
parapets-1000mm dia.

9.2B Laying reinforced cement concrete pipe Np4/ metre 5.60


prestressed concrete pipe for culverts on
first class bedding of granular material in
single row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works, backfilling,concrete and
masonry works in head walls and
parapets-1200mm dia.

9.3A Laying reinforced cement concrete pipe Np4/ metre 8.00


prestressed concrete pipe for culverts on
first class bedding of granular material in
double row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works back filling, concrete and
masonry works in head walls and parapets -
1000mm. Dia .

9.3B Laying reinforced cement concrete pipe Np4/ metre 11.20


prestressed concrete pipe for culverts on
first class bedding of granular material in
double row including fixing collar with
cement mortar 1:2 but excluding excavation,
protection works back filling, concrete and
masonry works in head walls and parapets -
1200mm. Dia.

Puducherry Region
11. Horticulture
Page No.: 959
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

11.14 Half brick circular tree guard in 2nd class each 6.25
brick internal diametre 1.25 m and height
1.2 m above ground and 0.20 m below ground,
bottom two courses laid dry and top three
courses in cement mortar 1:6 (1 cement: 6
sand) and the intermediate courses being in
dry honey comb masonry as per design
complete.

Puducherry Region
12. Foundation
Page No.: 960
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

12.4 Plain Cement Concrete 1:3:6 nominal mix in cum 230.00


foundation with crushed stone aggregate 40
mm nominal size mechancially mixed, placed
in foundation and compacted by vibration
including curing for 14 days including the
cost of labour, material, hire charge for
concrete mixer, electirc gen set, water
tanker and overhead charges.

12.5 Brick Masonry in Cement Mortar 1:3 in cum 122.40


foundation complete excluding Pointing and
Plastering, as per drawing and technical
specifications including the cost of
labour, material and overhead charges.

12.6 Cement Mortar 1:3 (1 Cement : 3 sand) cum 510.00


including the cost of labour, material and
overhead charges.

12.7A Stone Masonry work in cement mortar 1:3 in cum 153.00


foundation complete as per drawing and
Technical specifications - Square rubble
coursed rubble masonry (First sort)
including the cost of labour, material and
overhead charges.

12.7B Stone Masonry work in cement mortar 1:3 in cum 158.10


foundation complete as per drawing and
Technical specifications - Random rubble
masonry (coursed / uncoursed) including
the cost of labour, material and overhead
charges.

12.8A Plain cement concrete in open foundation cum 275.33


complete as per drawing and technical
specifications - PCC Grade M15 with a
minimum cement content of 275 kg / cum
including the cost of labour, material hire
charge for concrete mixer, electric gen
set, form work and overhead charges.

12.8B Plain cement concrete in open foundation cum 344.00


complete as per drawing and technical
specifications - PCC Grade M20 with a
minimum cement content of 344 kg / cum
including the cost of labour, material,
hire charge for concrete mixer, electric
gen set, form work and overhead charges.

12.8C.1 Reinforced cement concrete in open cum 347.33


foundation complete as per drawing and

Puducherry Region
12. Foundation
Page No.: 961
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

technical specifications - RCC Grade M20


with a minimum cement content 347 kg / cum
- Using concrete mixer including the cost
of labour, material, hire charge for
electric genset, formwork and overhead
charges.

12.8C.2 Reinforced cement concrete in open cun 347.16


foundation complete as per drawing and
technical specifications - RCC Grade M20
with a minimum cement content of 347 kg /
cum - With Batching Plant, Transit Mixer
and Concrete Pump, electric gen set, front
end loader including the cost of labour,
material, formwork and overhead charges.

12.8D.1 Plain cement concrete in open foundation cum 399.33


complete as per drawing and technical
specifications - PCC Grade M25 with a
minimum cement content of 400 kg / cum -
Using Concrete Mixer and electric genset
including the cost of labour and material,
formwork and overhead charges.

12.8D.2 Plain cement concrete in open foundation cum 399.58


complete as per drawing and technical
specifications - PCC Grade M25 with a
minimum cement content of 400 kg / cum -
With Batching Plant, Transit Mixer and
Concrete Pump, front end loader, electric
gen set including the cost of labour,
material, formwork and overhead charges.

12.8E.1 Reinforced cement concrete in open cum 403.33


foundation complete as per drawing and
technical specifications - RCC Grade M25
with a minimum cement content of 403 kg /
cum - Using Concrete Mixer and electric gen
set including the cost of labour, material,
form work and overhead charges.

12.8E.2 Reinforced cement concrete in open cum 403.16


foundation complete as per drawing and
technical specifications - RCC Grade M25
with a minimum cement content of 403 kg /
cum - With Batching Plant, Transit Mixer
and Concrete Pump, front end loader,
electric gen set including the cost of
labour, material, formwork and overhead
charges.

Puducherry Region
12. Foundation
Page No.: 962
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

12.8F.1 Plain cement concrete in open foundation cum 405.33


complete as per drawing and technical
specifications - PCC Grade M30 with a
minimum cement content of 405 kg / cum -
using Concrete Mixer and electric gen set
including the cost of labour, material,
formwork and overhead charges.

12.8F.2 Plain cement concrete in open foundation cum 405.00


complete as per drawing and technical
specifications - PCC Grade M30 with a
minimum cement content of 405 kg / cum -
Using Batching Plant, Transit Mixer and
Concrete Pump, front end loader, electric
gen set including the cost of labour,
material, formwork and overhead charges.

12.8G.1 Reinforced Cement Concrete in open cum 406.66


foundation complete as per drawing and
technical specifications - RCC Grade M30
with a minimum cement content of 407 kg /
cum - Using Concrete Mixer and electric gen
set including the cost of labour, material,
formwork and overhead charges.

12.8G.2 Reinforced Cement Concrete in open cum 406.66


foundation complete as per drawing and
technical specifications - RCC Grade M30
with a minimum cement content of 407 kg /
cum - Using Batching Plant, Transit Mixer
and Concrete Pump,front end loader,
electric gen set including the cost of
labour material, formwork and overhead
charges.

12.8H.1 Reinforced Cement Concrete in open cum 422.00


foundation complete as per drawing and
technical specifications - RCC Grade M35
with a minimum cement content of 422 kg /
cum - Using Concrete Mixer and electric gen
set including the cost of labour, material,
formwork and overhead charges.

12.8H.2 Reinforced Cement Concrete in open cum 422.00


foundation complete as per drawing and
technical specifications - RCC Grade M35
with a minimum cement content of 422 kg /
cum - Using Batching Plant, Transit Mixer
and Concrete Pump, front end loader,
electric gen set including the cost of
labour, material, formwork and overhead

Puducherry Region
12. Foundation
Page No.: 963
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

charges.

12.11C.4.1 Plain Cement Concrete, in Well Foundation cum 419.33


complete as per Drawing and Technical
Specifications - Bottom Plug - PCC Grade
M35 with a minimum cement content of 419 kg
/ cum - Using Concrete Mixer

12.11C.4.2 Plain Cement Concrete, in Well Foundation cum 419.00


complete as per Drawing and Technical
Specifications - Bottom Plug - PCC Grade
M35 with a minimum cement content of 419 kg
/ cum - Using Batching Plant, Transit Mixer
and Crane / Concrete Pump, front end
loader, electric gen set including the cost
of labour, material, admixtures and
overhead charges.

12.11F.4.1 Reinforced cement concrete, in well cum 422.00


foundation complete as per drawing and
technical specifications - well cap - RCC
grade M35 with a minimum cement content of
422 kg / cum - Using concrete mixer and
electric gen set including the cost of
labour, material, formwork and overhead
charges.

12.11F.4.2 Reinforced cement concrete, in well cum 422.00


foundation complete as per drawing and
technical specifications - well cap - RCC
grade M35 with a minimum cement content of
422 kg / cum - Using Batching plant ,
transit mixer and concrete pump, front end
loader, electric gen set including the cost
of labour, material, formwork and overhead
charges.

12.22.1 Boring, providing and installing bored cast metre 66.67


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The

Puducherry Region
12. Foundation
Page No.: 964
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cost shall include the cost of dismantling


of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
450mm (Using concrete mixer)

12.23.1 Boring, providing and installing bored cast metre 185.06


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
750mm (Using concrete mixer)

12.24.1 Boring, providing and installing bored cast metre 329.17


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of

Puducherry Region
12. Foundation
Page No.: 965
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

pile to be embedded in the pile cap. The


cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter -
1000mm (Using concrete mixer)

12.25.1 Boring, providing and installing bored cast metre 473.84


- in - situ reinforced cement concrete pile
of specified diameter using approved
drilling method to the required depth up to
the cut off level in pile cap in RCC M35
grade with a minimum cement content of 419
kg / cum using Blue metal of 20mm and down
gauge to carry a safe working load not less
than the specified, excluding the cost of
steel reinforcement but including the cost
of boring with casing from Natural / formed
ground level, bentonite mud circulation of
approved specific gravity and the length of
pile to be embedded in the pile cap. The
cost shall include the cost of dismantling
of laitenance / week concrete as per BIS
norms, removal of dismantled debries and
the waste bore mug from the site with all
lifts and lead upto 1000m - as directed by
the Engineer - in - charge. The rate shall
include all machineries required for
boring, genset, skilled labour etc. (Length
of pile for payment shall be measured upto
the bottom of pile cap) - pile diameter
-1200mm (Using concrete mixer)

12.26.1 Driven cast -in -place vertical M35 grade metre 186.02
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 750 mm diametre (Using
concrete mixer)

12.27.1 Driven cast -in -place vertical M35 grade metre 330.78
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 1000 mm diametre (Using

Puducherry Region
12. Foundation
Page No.: 966
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

concrete mixer)

12.28.1 Driven cast -in -place vertical M35 grade metre 476.42
with a minimum cement content of 419 kg /
cum R.C.C. pile excluding reinforcement
complete as per drawing and technical
specifications - 1200 mm diametre (Using
concrete mixer)

12.29.1 Driven precast vertical M 35 grade with a metre 82.85


minimum cement content of 419 kg / cum
R.C.C piles excluding reinforcement
complete as per drawing and technical
specifications - 500 mm diameter pile
(using crane, vibrating pile driving hammer
with power unit) including the cost of
materials, labour and transportation cost @
1% of material and machinery.

12.30.1 Driven precast vertical M 35 grade with a metre 186.35


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
750mm diameter pile (Using crane, vibrating
pile drawing hammer with power unit)
including the cost of materials, labour and
transportation cost @ 1% of materials and
machinery.

12.31.1 Driven precast vertical M 35 grade with a metre 331.27


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
1000mm diametre pile.(using crane and
vibrating pile driving hammer with power
unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.32.1 Driven precast vertical M35 grade with a metre 37.98


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 300mm x 300mm.(Using crane and
vibrating pile driving hammer with power
unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.33.1 Driven precast vertical M 35 grade with a metre 105.50


minimum cement content of 419 kg / cum RCC

Puducherry Region
12. Foundation
Page No.: 967
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

piles excluding reinforcement complete as


per drawing and technical specifications -
size of pile 500 mm x 500 mm (Using crane
and vibrating pile driving hammer with
power unit including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.34.1 Driven precast vertical M 35 grade with a metre 237.37


minimum cement content of 419 kg / cum RCC
piles excluding reinforcement complete as
per drawing and technical specifications -
size of pile 750 mm x 750mm.(Using crane,
vibrating pile driving hammer with power
unit) including the cost of materials,
labour and transportation cost @ 1% of
material and machinery.

12.38A.1 Cement concrete for reinforced concrete in cum 341.33


pile cap complete as per drawing and
technical specifications - RCC grade M20
with a minimum cement content of 341 kg /
cum (Using Concrete mixer and electric
genset) including all machineries and
formwork.

12.38A.2 Cement concrete for reinforced concrete in cum 341.33


pile cap complete as per drawing and
technical specifications - RCC grade M20
with a minimum cement content of 341 kg /
cum - (Using Batching plant , Transit mixer
and Concrete pump) including all
machineries and formwork.

12.38B.1 Cement concrete for reinforced concrete in cum 399.33


pile cap complete as per drawing and
technical specifications - RCC grade M25
with a minimum cement content of 399 kg /
cum -(Using concrete mixer) including all
machineries and formwork.

12.38B.2 Cement concrete for reinforced concrete in cum 399.33


pile cap complete as per drawing and
technical specifications - RCC grade M25
with a minimum cement content of 399 kg /
cum -(Using Batching plant, Transit Mixer
and Concrete Pump) including all
machineries and formwork.

12.38C.1 Cement concrete for reinforced concrete in cum 406.66


pile cap complete as per drawing and

Puducherry Region
12. Foundation
Page No.: 968
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

technical specifications - RCC grade M30


with a minimum cement content of 407 kg /
cum -(Using concrete mixer)including all
machineries and formwork.

12.38C.2 Cement concrete for reinforced concrete in cum 406.66


pile cap complete as per drawing and
technical specifications - RCC grade M30
with a minimum cement content of 407 kg /
cum -(Using Batching plant, Transit Mixer
and Concrete pump) including all
machineries and formwork.

12.38D.1 Cement concrete for reinforced concrete in cum 422.00


pile cap complete as per drawing and
technical specifications - RCC grade M35
with a minimum cement content of 422 kg /
cum -(Using Concrete mixer) including all
machineries and formwork.

12.38D.2 Cement concrete for reinforced concrete in cum 422.00


pile cap complete as per drawing and
technical specifications - RCC grade M35
with a minimum cement content of 422 kg /
cum -(Using Batching plant , Transit Mixer
and Concrete Pump) including all
machineries and formwork.

12.39 Providing and laying of PCC M15 with a cum 275.33


minimum cement content of 275 kg / cum
levelling course 100mm thick below the pile
cap (Using concrete mixer and electric
genset)

Puducherry Region
13. Substructure
Page No.: 969
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

13.1 Brick masonry work in cement mortar 1:3 cum 122.40


(One cement and three sand) in substructure
complete excluding pointing and plastering,
as per drawing and technical specification-
including the cost of labour, material and
formwork

13.2 Pointing with cement mortar 1:3 (one cement sqm 1.53
and three sand) on brick work in
substructure as per technical
specification-including the cost of labour,
material.

13.3 Plastering with cement mortar 1:3 (one sqm 7.34


cement and three sand) on brick work in
substructure as per Technical
specifications-including the cost of labour
and material.

13.4A Stone masonry work in cement mortar 1:3 cum 168.30


(one cement and three sand) for
substructure complete as per drawing and
technical specifications) - Random rubble
masonry-including the cost of labour,
material and formwork.

13.4B Stone masonry work in cement mortar 1:3 cum 153.00


(one cement and three sand) for
substructure complete complete as per
drawing and technical specifications) -
Coursed rubble masonry (first
sort)-including the cost of labour,
material and formwork.

13.4C Stone masonry work in cement mortar 1:3 cum 168.30


(one cement and three sand) for
substructure complete complete as per
drawing and technical specifications) -
Ashlar masonry (first sort)-including the
cost of labour ,material and formwork.

13.5A Plain Cement Concrete in substructure cum 275.33


complete as per drawing and technical
specification - PCC Grade M15 with a
minimum cement content 275 kg / cum upto 5
metre height-including the cost of labour,
material, machinery and formwork.

13.5B Plaing Cement Concrete in substructure cum 344.00


complete as per drawing and technical
specification - PCC Grade M20 with a

Puducherry Region
13. Substructure
Page No.: 970
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

minimum cement content 344 kg / cum upto 5


metre height-including the cost of labour
,material,machinery and formwork.

13.5C.1.1 Plaing Cement Concrete in substructure cum 399.33


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 399 kg / cum upto 5
metre height-Using concrete
mixer(Formwork-10%).

13.5C.1.2 Plain Cement Concrete in substructure cum 399.58


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 400 kg / cum up to
5m height- Using batching
plant(Formwork-10%).

13.5C.2.1 Plain Cement Concrete in substructure cum 399.33


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 399 kg / cum - For
height above 5m height and upto 10m - Using
concrete mixer (Form work 12 % + Extra lift
2 %)

13.5C.2.2 Plain Cement Concrete in substructure cum 399.58


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 400 kg / cum for
height above 5m and upto 10m using batching
plant (Form work 12% + Extra lift 2%)

13.5C.3.1 Plain Cement Concrete in substructure cum 399.33


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 399 kg / cum for
height above 10m using concrete mixer (Form
work 15% + Extra lift 4%)

13.5C.3.2 Plain Cement Concrete in substructure cum 399.58


complete as per drawing and technical
specification - PCC Grade M25 with a
minimum cement content 400 kg / cum for
height above 10m using batching plant (Form
work 15% + Extra lift 4%)

13.5D.1.1 Plain Cement Concrete in substructure cum 405.33


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum upto

Puducherry Region
13. Substructure
Page No.: 971
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

5m height - using concrete mixer


(Formwork-10%).

13.5D.1.2 Plain Cement Concrete in substructure cum 405.00


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum upto
5m height- Using batching plant
(Formwork-10%).

13.5D.2.1 Plain Cement Concrete in substructure cum 405.33


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum for
height above 5m and upto 10m using
concrete mixer (Formwork 12% + Extra lift
2%)

13.5D.2.2 Plain Cement Concrete in substructure cum 405.00


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum For
height above 5m and upto 10m height using
batching plant (Form work 12% + Extra lift
2%)

13.5D.3.1 Plain Cement Concrete in substructure cum 405.33


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum for
height above 10m -Using concrete mixer
(Form work 15% + Extra lift 4%)

13.5D.3.2 Plain Cement Concrete in substructure cum 405.00


complete as per drawing and technical
specification - PCC Grade M30 with a
minimum cement content 405 kg / cum for
height above 10m -Using batching plant
(Form work 15% + Extra lift 4%)

13.5E.1.1 Reinforced Cement Concrete in substructure cum 347.33


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum up to 5m
height -Using concrete mixer

13.5E.1.2 Reinforced Cement Concrete in substructure cum 347.16


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum up to 5m
height -Using batching plant

Puducherry Region
13. Substructure
Page No.: 972
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

13.5E.2.1 Reinforced Cement Concrete in substructure cum 347.33


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum for height
above 5m and upto 10m -Using concrete
mixer (Form work 12% + Extra lift 2%)

13.5E.2.2 Reinforced Cement Concrete in substructure cum 347.16


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum for height
above 5m and upto 10m -Using batching
plant (Form work 12% + Extra lift 2%)

13.5E.3.1 Reinforced Cement Concrete in substructure cum 347.33


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum for height
above 10m - Using concrete mixer (Form
work 15% + Extra lift 4%)

13.5E.3.2 Reinforced Cement Concrete in substructure cum 347.16


complete as per drawing and technical
specification -RCC Grade M20 with a minimum
cement content 347 kg / cum for height
above 10m - Using batching plant (Form
work 15% + Extra lift 4%)

13.5F.1.1 Reinforced Cement Concrete in substructure cum 403.33


complete as per drawing and technical
specification -RCC Grade M25 with a
minimum cement content 403 kg / cum for
upto height 5m - Using concrete mixer

13.5F.1.2 Reinforced Cement Concrete in substructure cum 403.16


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 403 kg / cum for upto
height 5m - Using batching plant

13.5F.2.1 Reinforced Cement Concrete in substructure cum 403.33


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 403 kg / cum for height
above 5m and upto 10m height - Using
concrete mixer (Form work 11.8% + Extra
lift 1.8%)

13.5F.2.2 Reinforced Cement Concrete in substructure cum 403.16


complete as per drawing and technical
specification -RCC Grade M25 with a minimum

Puducherry Region
13. Substructure
Page No.: 973
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cement content 403 kg / cum for height


above 5m and upto 10m height - Using
batching plant (Form work 11.8% + Extra
lift 1.8)

13.5F.3.1 Reinforced Cement Concrete in substructure cum 405.33


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 405 kg / cum for height
above 10m - Using concrete mixer (Form
work 15% + Extra lift 4%)

13.5F.3.2 Reinforced Cement Concrete in substructure cum 403.16


complete as per drawing and technical
specification -RCC Grade M25 with a minimum
cement content 403 kg / cum for height
above 10m - Using batching plant (Form
work 15% + Extra lift 4%)

13.5G.1.1 Reinforced Cement Concrete in substructure cum 406.66


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum upto 5m height
- Using concrete mixer (Formwork-10%)

13.5G.1.2 Reinforced Cement Concrete in substructure cum 406.66


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum upto 5m
height - Using batching plant
(Formwork-10%).

13.5G.2.1 Reinforced Cement Concrete in substructure cum 406.66


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum for height
above 5m and upto 10m height - Using
concrete mixer (Form work 11.5% + Extra
lift 1.6%)

13.5G.2.2 Reinforced Cement Concrete in substructure cum 406.66


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum for height
above 5m and upto 10m height - Using
batching plant (Form work 11.5% + Extra
lift 1.6 %)

13.5G.3.1 Reinforced Cement Concrete in substructure cum 406.66


complete as per drawing and technical
specification -RCC Grade M30 with a minimum

Puducherry Region
13. Substructure
Page No.: 974
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cement content 407 kg / cum for height


above 10m - Using concrete mixer (Form
work 14% + Extra lift 3.5%)

13.5G.3.2 Reinforced Cement Concrete in substructure cum 406.66


complete as per drawing and technical
specification -RCC Grade M30 with a minimum
cement content 407 kg / cum for height
above 10m - Using batching plant (Form
work 14% + Extra lift 3.5%)

13.5H.1.1 Reinforced Cement Concrete in substructure cum 422.00


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
upto 5m - Using concrete mixer
(Formwork-10%).

13.5H.1.2 Reinforced Cement Concrete in substructure cum 422.00


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
upto 5m - Using batching plant
(Formwork-10%).

13.5H.2.1 Reinforced Cement Concrete in substructure cum 422.00


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 5m and upto 10m - Using concrete
mixer (Form work 11% + Extra lift 1.4%)

13.5H.2.2 Reinforced Cement Concrete in substructure cum 422.00


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 5m and upto 10m - Using batching
plant (Form work 11% + Extra lift 1.4%)

13.5H.3.1 Reinforced Cement Concrete in substructure cum 422.00


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 10m - Using concrete mixer (Form
work 13% + Extra lift 3%)

13.5H.3.2 Reinforced Cement Concrete in substructure cum 422.00


complete as per drawing and technical
specification -RCC Grade M35 with a minimum
cement content 422 kg / cum for height
above 10m - Using batching plant (Form

Puducherry Region
13. Substructure
Page No.: 975
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

work 13% + Extra lift 3%)

13.8 Providing weep holes in brick masonry nos 0.85


/plain/reinforced concrete abutment, wing
wall / return wall with 100 mm dia AC pipe,
extending through the full width of the
structure with slope of 1V:20H towards
drawing foce. Complete as per drawing and
technical specifications.

Puducherry Region
14. Superstructure
Page No.: 976
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

14.1A.1 Furnishing and placing reinforced cement cum 341.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using concrete mixer - for solid
slab superstructure - height upto 5m
including all machineries and formwork etc.

14.1A.1.1 Furnishing and placing reinforced cement cum 341.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer - for T-beam &
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1A.2 Furnishing and placing reinforced cement cum 341.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer -for solid slab
superstructure - for height above 5m upto
10m-including all machineries and formwork
etc.

14.1A.2.1 Furnishing and placing reinforced cement cum 341.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure -for height above 5m
upto 10m-including all machineries and
formwork etc.

14.1A.3 Furnishing and placing reinforced cement cum 341.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using concrete mixer -for solid slab
superstructure - for height above
10m-including all machineries and formwork
etc.

14.1A.3.1 Furnishing and placing reinforced cement cum 341.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure -for height above
10m-including all machineries and formwork

Puducherry Region
14. Superstructure
Page No.: 977
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

etc.

14.1B.1 Furnishing and placing reinforced cement cum 399.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer - for solid
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1B.1.1 Furnishing and placing reinforced cement cum 399.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer and electric
gen set - for T-beam & slab superstructure
- height upto 5m including all machineries
and formwork, etc.

14.1B.2 Furnishing and placing reinforced cement cum 399.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer -for solid slab
superstructure - height above 5m and upto
10m including all machineries and formwork,
etc.

14.1B.2.1 Furnishing and placing reinforced cement cum 399.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure - height above 5m and
upto 10m- including all machineries and
formwork, etc.,

14.1B.3 Furnishing and placing reinforced cement cum 399.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /
cum - Using concrete mixer -for solid slab
superstructure - height above10m-
including all machineries and
formwork,etc.,

14.1B.3.1 Furnishing and placing reinforced cement cum 399.33


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 399 kg /

Puducherry Region
14. Superstructure
Page No.: 978
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

cum - Using concrete mixer -for T-beam &


slab superstructure - height above 10m-
including all machineries and formwork,
etc.,

14.1C.1 Furnishing and placing reinforced cement cum 406.66


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer - for solid
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1C.1.1 Furnishing and placing reinforced cement cum 406.66


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer - forT-beam &
slab superstructure - height upto 5m
including all machineries and formwork,
etc.

14.1C.2 Furnishing and placing reinforced cement cum 406.66


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -for solid
slab superstructure - height above 5m to
10m-including all machineries and formwork,
etc.,

14.1C.2.1 Furnishing and placing reinforced cement cum 406.66


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -forT-beam &
slab superstructure - height above 5m to
10m-including all machineries and
formwork,etc.,

14.1C.3 Furnishing and placing reinforced cement cum 406.66


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -for solid
slab superstructure - height above
10m-including all machineries and
formwork,etc.,

14.1C.3.1 Furnishing and placing reinforced cement cum 406.66

Puducherry Region
14. Superstructure
Page No.: 979
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

concrete in superstructure as per drawing


and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using concrete mixer -forT-beam &
slab superstructure - height
above10m-including all machineries and
formwork,etc.,

14.1D.1.1 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer - for solid slab superstructure -
height upto 5m including all machineries
and formwork, etc.

14.1D.1.2 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for T-beam & slab superstructure -
height upto 5m-including all machineries
and formwork,etc.,

14.1D.1.3 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for box girder and balanced
cantilever - height upto 5m-including all
machineries and formwork,etc.,

14.1D.2.1 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for solid slab superstructure -
height above 5m and upto 10m-including all
machineries and formwork,etc.,

14.1D.2.2 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for T-beam & slab superstructure -
height above 5m to 10m-including all

Puducherry Region
14. Superstructure
Page No.: 980
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

machineries and formwork,etc.,

14.1D.2.3 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for box girder and balanced
cantilever - height above 5m and upto
10m-including all machineries and
formwork,etc.,

14.1D.3.1 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for solid slab superstructure -
height above 10m-including all machineries
and formwork,etc.,

14.1D.3.2 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for T-beam & slab superstructure -
height above 10m-including all machineries
and formwork,etc.,

14.1D.3.3 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using concrete
mixer -for box girder and balanced
cantilever - height above10m-including all
machineries and formwork,etc.,

14.1E.1.1 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer - for solid
slab superstructure- height upto 5m
including all machineries and formwork,
etc.

14.1E.1.2 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade

Puducherry Region
14. Superstructure
Page No.: 981
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

M40 with a minimum cement content 430 kg /


cum - Using concrete mixer -for T-beam &
slab superstructure- height upto
5m-including all machineries and
formwork,etc.,

14.1E.2.1 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for solid
slab superstructure- height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.1E.2.2 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure- height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.1E.3.1 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for solid
slab superstructure- height above
10m-including all machineries and
formwork,etc.,

14.1E.3.2 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using concrete mixer -for T-beam &
slab superstructure- height above
10m-including all machineries and
formwork,etc.,

14.1F.1.1 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height upto 5m- including
all machineries and formwork, etc.,

Puducherry Region
14. Superstructure
Page No.: 982
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

14.1F.1.2 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
including launching of precast girders by
launching truss upto 40m span - height upto
5m-including all machineries and formwork,
etc.,

14.1F.1.3 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height upto
5m-including all machineries and formwork,
etc.,

14.1F.2.1 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height above 5m and upto
10m-including all machineries and formwork,
etc.,

14.1F.2.2 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant,transit mixer
and concrete pump -for I - beam and slab
including launching of precast girders by
launching truss upto 40m span - height
above 5m and upto 10m-including all
machineries and formwork, etc.,

14.1F.2.3 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above 5m and

Puducherry Region
14. Superstructure
Page No.: 983
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

upto 10m-including all machineries and


formwork, etc.,

14.1F.3.1 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height above 10m-including
all machineries and formwork, etc.,

14.1F.3.2 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
including launching of precast girders by
launching truss upto 40m span - height
above 10m-including all machineries and
formwork, etc.,

14.1F.3.3 Furnishing and placing reinforced cement cum 465.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M45 with a minimum cement content 465 kg /
cum - Using batching plant,transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above
10m-including all machineries and formwork,
etc.,

14.1G.1.1 Furnishing and placing reinforced cement cum 490.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M50 with a minimum cement content 490 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height upto
5m-including all machineries and formwork,
etc.,

14.1G.2.1 Furnishing and placing reinforced cement cum 490.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M50 with a minimum cement content 490 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ

Puducherry Region
14. Superstructure
Page No.: 984
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

box girder, segmental construction and


balanced cantilever - height above 5m to
10m-including all machineries and formwork,
etc.,

14.1G.3.1 Furnishing and placing reinforced cement cum 490.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M50 with a minimum cement content 490 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above
10m-including all machineries and formwork,
etc.,

14.1H.1.1 Furnishing and placing reinforced cement cum 529.16


concrete in superstructure as per drawing
and technical specifications - PSC grade
M55 with a minimum cement content 529 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height upto 5
m-including all machineries and formwork,
etc.,

14.1H.2.1 Furnishing and placing reinforced cement cum 529.16


concrete in superstructure as per drawing
and technical specifications - PSC grade
M55 with a minimum cement content 529 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above 5m to
10m- including all machineries and
formwork, etc.,

14.1H.3.1 Furnishing and placing reinforced cement cum 529.16


concrete in superstructure as per drawing
and technical specifications - PSC grade
M55 with a minimum cement content 529 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in - situ
box girder, segmental construction and
balanced cantilever - height above
10m-including all machineries and formwork,
etc.,

14.2A.1 Furnishing and placing reinforced cement cum 341.00


concrete in superstructure as per drawing

Puducherry Region
14. Superstructure
Page No.: 985
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

and technical specifications - RCC grade


M20 with a minimum cement content 341kg /
cum - Using batching plant, transit mixer
and concrete pump-for solid slab
superstructure -for height upto 5m-
including all mahineries and formwork,etc.,

14.2A.1.1 Furnishing and placing reinforced cement cum 341.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant, transit mixer
and concrete pump-for T-beam & slab
superstructure -for height upto
5m-including all machineries and formwork.

14.2A.2 Furnishing and placing reinforced cement cum 341.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant , transit mixer
and concrete pump-for solid slab
superstructure -for height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.2A.2.1 Furnishing and placing reinforced cement cum 341.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341 kg /
cum - Using batching plant, transit mixer
and concrete pump-for T-beam & slab
superstructure -for height above 5m and
upto 10m-including all machineries and
formwork, etc.,

14.2A.3 Furnishing and placing reinforced cement cum 341.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure -for height above 10m

14.2A.3.1 Furnishing and placing reinforced cement cum 341.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M20 with a minimum cement content 341kg /
cum - Using batching plant , transit mixer
and concrete pump-for T-beam & slab
superstructure -for height above

Puducherry Region
14. Superstructure
Page No.: 986
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

10m-including all machineries and formwork


etc.,

14.2B.1 Furnishing and placing reinforced cement cum 399.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant,transit mixer
an concrete pump -for solid slab
superstructure - height upto 5m- including
all machineries and formwork, etc.,

14.2B.1.1 Furnishing and placing reinforced cement cum 399.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height upto 5m- including
all machineries and formwork,etc.,

14.2B.2 Furnishing and placing reinforced cement cum 399.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump-for solid slab
superstructure - height above 5m and upto
10m-including all machineries and formwork,
etc.,

14.2B.2.1 Furnishing and placing reinforced cement cum 399.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 5m and upto
10m-including all machineries and
formwork,etc.,

14.2B.3 Furnishing and placing reinforced cement cum 399.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height above 10m-
including all machineries and
formwork,etc.,

Puducherry Region
14. Superstructure
Page No.: 987
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

14.2B.3.1 Furnishing and placing reinforced cement cum 399.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M25 with a minimum cement content 400 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 10m
-including all machineries and formwork,
etc.,

14.2C.1 Furnishing and placing reinforced cement cum 406.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure - height upto 5m- including
all machineries and formwork, etc.,

14.2C.1.1 Furnishing and placing reinforced cement cum 406.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant -for T-beam &
slab superstructure - height upto 5m

14.2C.2 Furnishing and placing reinforced cement cum 406.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant,transit mixer
and concrete pump -for solid slab
superstructure - height above 5m to
10m-including all machineries and formwork,
etc.,

14.2C.2.1 Furnishing and placing reinforced cement cum 406.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 5m and upto
10m-including all machineries and
formwork,etc.,

14.2C.3 Furnishing and placing reinforced cement cum 406.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer

Puducherry Region
14. Superstructure
Page No.: 988
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

and concrete pump -for solid slab


superstructure - height above
10m-including all machineries and formwork,
etc.,

14.2C.3.1 Furnishing and placing reinforced cement cum 406.58


concrete in superstructure as per drawing
and technical specifications - RCC grade
M30 with a minimum cement content 407 kg /
cum - Using batching plant, transit mixer
and concrete pump -for T-beam & slab
superstructure - height above 10m-
including all machineries and formwork,
etc.,

14.2D.1.1 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump -
for solid slab superstructure - height upto
5m-including all machineries and
formwork,etc.,

14.2D.1.2 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump
-for T-beam & slab superstructure - height
upto 5m-including all machineries and
formwork,etc.,

14.2D.1.3 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump
-for box girder and balanced cantilever-
height upto 5m-including all machineries
and formwork,etc.,

14.2D.2.1 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump -

Puducherry Region
14. Superstructure
Page No.: 989
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

for solid slab superstructure - height


above 5m to 10m-including all machineries
and formwork,etc.,

14.2D.2.2 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant,transit mixer and concrete pump -for
T-beam & slab superstructure - height above
5m and upto 10m-including all machineries
and formwork,etc.,

14.2D.2.3 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump -for
box girder and balanced cantilever- height
above 5m and upto 10m-including all
machineries and formwork,etc.,

14.2D.3.1 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump,
etc., - for solid slab superstructure -
height above 10m-including all machineries
and formwork,etc.,

14.2D.3.2 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump
-for T-beam & slab superstructure - height
above 10m- including all machineries and
formwork,etc.,

14.2D.3.3 Furnishing and placing reinforced cement cum 422.00


concrete in superstructure as per drawing
and technical specifications - RCC grade
M35 / PSC grade M35 with a minimum cement
content 422 kg / cum - Using batching
plant, transit mixer and concrete pump
-for box girder and balanced cantilever-

Puducherry Region
14. Superstructure
Page No.: 990
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

height above 10m-including all machineries


and formwork,etc.,

14.2E.1.1 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for solid slab
superstructure- height upto 5m-including
all machineries and formwork,etc.,

14.2E.1.2 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
superstructure including launching of
precast girders by launching truss upto
40m span- height upto 5m-including all
machineries and formwork,etc.,

14.2E.1.3 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in-situ box
girder, segmental construction and
balanced cantilever - height upto 5m-
including all machineries and formwork,
etc.,

14.2E.2.1 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant,transit mixer
and concrete pump -for solid slab
superstructure- height above 5m and upto
10m- including all machineries and
formwork, etc.,

14.2E.2.2 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
superstructure including launching of

Puducherry Region
14. Superstructure
Page No.: 991
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

precast girders by launching truss upto


40m span- height above 5m and upto 10m-
including all machineries and
formwork,etc.,

14.2E.2.3 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in-situ box
girder, segmental construction and
balanced cantilever - height above 5m and
upto 10m-including all machineries and
formwork,etc.,

14.2E.3.1 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant -for solid
slab superstructure- height above 10m

14.2E.3.2 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for I - beam and slab
superstructure including launching of
precast girders by launching truss upto
40m span- height above 10m- including all
machineries and formwork,etc.,

14.2E.3.3 Furnishing and placing reinforced cement cum 430.00


concrete in superstructure as per drawing
and technical specifications - PSC grade
M40 with a minimum cement content 430 kg /
cum - Using batching plant, transit mixer
and concrete pump -for cast - in-situ box
girder, segmental construction and
balanced cantilever - height above 10m-
including all machineries and
formwork,etc.,

14.4 Providing and laying cement concrete cum 405.00


wearing coat M30 grade with a minimum
cement content 405 kg / cum including
reinforcement complete as per drawing and
technical specification

Puducherry Region
14. Superstructure
Page No.: 992
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

14.6 Construction of precast RCC railing of M30 Rmt 34.66


grade with a minimum cement content 407 kg
/ cum , aggregate size not exceeding 12mm,
true to line and grade, tolerance of
vertical RCC post not to exceed I in 500,
centre to centre spacing between vertical
post not to exceed 2000 mm, leaving
adequate space between vertical post for
expansion, complete as per approved
drawings and technical specifications

14.7 Construction of RCC railing of M30 grade Rmt 34.66


with a minimum cement content 407 kg / cum
cast- in-situ with 20mm nominal size
aggregate, true to line and grade,
tolerance of vertical RCC post not to
exceed 1 in 500, centre to centre spacing
between vertical post not to exceed 2000mm,
leaving adequate space between vertical
post for expansion, complete as per
approved drawings and technical
specifications

14.10 PCC M15 with a minimum cement content 275 cum 275.00
kg / cum grade levelling course below
approch slab complete as per drawing and
technical specifications

14.11A Reinforced cement concrete M30 grade with cum 406.66


a minimum cement content 407 kg / cum
approach slab including reinforcement and
formwork complete as per drawing and
technical specifications - Using concrete
mixer

14.11B Reinforced cement concrete M30 grade with cum 406.66


a minimum cement content 407 kg / cum
approach slab including reinforcement and
formwork complete as per drawing and
technical specifications - Using batching
plant, transit mixer and concrete pump.

Puducherry Region
15. River Training and Protection Works
Page No.: 993
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

15.3 Providing and laying of apron with cement cum 275.33


concrete blocks of size 0.5x0.5x0.5 m
cast-in-situ and made with nominal mix of
M15 grade cement concrete with a minimum
cement content of 250kg/cum as per
IRC:21-2000 (add 2 percent of cost to
account for excavation for preparation of
bed,nominal surface reinforcement and
filling of granular material in recesses
between blocks)

15.4B Providing and laying pitching on slopes cum 275.33


laid over prepared filter media including
boulder apron laid dry in front of toe of
embankment complete as per drawing and
technical specifications - Cement concrete
blocks of size 0.3 x 0.3 x 0.3 m cast in
cement concrete of grade M15 (add 2 percent
of cost to account for excavation for
preparation of bed,nominal surface
reinforcement and filling of granular
material in recesses between blocks)

15.10A Curtain wall complete as per drawing and cum 153.00


technical specifications - Stone masonry in
cement mortar 1:3

15.10B Curtain wall complete as per drawing and cum 275.33


technical specifications - cement concrete
grade M15

Puducherry Region
16. Repair and Rehabilitation
Page No.: 994
----------------------------------------------------------------------------------
Code No. Description Unit Cement Reqd.
per unit in Kg.
----------------------------------------------------------------------------------

16.5A Sealing of cracks / porous concrete by kg 1.32


injection process through nipples/ grouting
complete as per technical specifications-
Cement grout

16.5B Sealing of cracks / porous concrete by kg 0.66


injection process through nipples /
grouting complete as per technical
specifications - cement mortar (1:1)
grouting

16.9 Removal of defective concrete , cleaning sqm 12.00


the surface thoroughly, applying the
shotcrete mixture mechanically with
compressed air under pressure, comprising
of cement, sand, coarse aggregates, water
and quick setting compound in the
proportion as per clause 2807.1, sand and
coarse aggregates conforming to IS: 383 and
Table 1 of IS: 9012 respectively, water
cement ratio ranging from 0.35 to 0.50,
density of gunite not less than 2000 kg /
cum, strength not less than 25 Mpa and
workmanship conforming to clause 2807.6.

16.17 Replacement of expansion joints complete as Rmt 121.60


per drawings

16.21 Repair of concrete crash barrier with Rmt 12.16


cement concrete of M30 grade by cutting and
trimming the damaged portion to a regular
shape, cleaning the area to be repaired
thorougly, applying cement concrete after
erection of proper formwork

16.22 Repair of RCC railing (Carrying out repair Rmt 4.06


of RCC railing to bring it to the original
shape)

Puducherry Region
BITUMEN
CONSUMPTION
STATEMENT
6. Bituminous Construction (MOST)
Code No. Description Unit Bitumen Reqd.per
unit in Kg.

6.5E.1 Providing and applying tack coat on the prepared Sqm 0.50
surface, heating bitumen in boiler and spraying the
bitumen with spray set fitted on bitumen boiler – on
black topped bitumen @ 5kg / 10 sqm.

6.5F.1 Providing and applying tack coat on the prepared Sqm 1.00
surface, heating bitumen in boiler and spraying the
bitumen with spray set fitted on bitumen boiler – on
black topped bitumen @ 10kg / 10 sqm.

6.5G.1 Providing and applying tack coat on the prepared Sqm 0.25
surface, spraying the bitumen emulsion with spray
set at 2.50 kg / 10sqm. As per clause 503 of Most
specification.

6.5H.1 Providing and applying tack coat on the prepared Sqm 0.40
surface, spraying the bitumen emulsion with spray
set at 4.00 kg / 10sqm. As per clause 503 of Most
specification.

6.11A Providing and laying open graded premix carpet with Sqm 1.46
specified graded crushed aggregates for wearing
course including loading of aggregates with i.e.
loader, heating binder and aggregates in hot mix
plant 30 to 40 tonne, transporting the mixed material
with tipper and laying with paver finisher to the
required level and grade, rolling with power roller 8 to
10 tonne but excluding cost of tack and seal coat
with lead for mix of material 1 km. As per clause no
509 of MOST specification.

6.11B Providing and laying open graded premix carpet Sqm 1.46
20mm thick on prepared surface in a single course
as wearing course composed of specified size of
stone aggregates premix with a bituminous binder in
mini hot mix plant 6 to 10 tonne laying manually and
rolling with power roller 8 to 10 tonne but excluding
cost of primer/tack coat. As per clause no 509 of
MOST specification.

6.11C Providing and laying open graded premix carpet of Sqm 1.82
25mm thick on prepared surface in a single course
as wearing course composed of specified size of
stone aggregates premix with a bituminous binder in
mini hot mix plant 6-10 tonne laying manually and
rolling with power roller 8-10 tonne but excluding
cost of primer/tack coat. As per clause no 509 of
MOST specification.

Puducherry Page 995


Code No. Description Unit Bitumen Reqd.per
unit in Kg.

6.16 Providing and applying liquid seal coat, type `A' Sqm 0.98
comprising of a layer of bituminous binder, followed
by a cover of stone chipping of specified grading and
rolling with power roller 8 to 10 tonne. As per clause
no 513 of MOST specification.

6.17 Providing and applying premixed seal coat type `B' Sqm 0.68
comprising of thin application of fine aggregate
premix with bitumen binder in mini hot mix plant,
carriage manually of mixed material and laying and
rolling with power roller 8 to 10 tonne. As per clause
no 513 of MOST specification.

Puducherry Page 996


5. Base and Bituminous Construction (MORTH)
Code No. Description Unit Bitumen Reqd.per
unit in Kg.

5.1 Providing and applying primer coat with bitumen Sqm 0.60
emulsion on prepared surface of granular base
including clearing of road surface and spraying
primer at the rate of 0.60 kg/sqm using mechanical
means. (As per MORTH specification, 4th Revision)

5.2 Providing and applying tack coat with bitumen Sqm 0.20
emulsion using emulsion pressure distributor at the
rate of 0.20 kg. per sqm. on the prepared bituminous
/ granular surface cleaned with mechanical broom.
(As per MORTH specification, 4th Revision)

5.3A Providing and laying bituminous macadam with hot Cum 76.829
mix plant of capacity not less than 40 to 60 TPH
using crushed aggregates of specified grading
premixed with bituminous binder, transported to site,
laid over a previously prepared surface with paver
finisher to the required grade, level and alignment
and rolled as per clauses 501.6 and 507.7 of
MORTH specification, 4th Revision, to achieve the
desired compaction.- Using grade I metal and
bitumen 60/70 grade.

5.3B Providing and laying bituminous macadam with hot Cum 76.829
mix plant of capacity not less than 40 -60 TPH using
crushed aggregates of specified grading premixed
with bituminous binder, transported to site, laid over
a previously prepared surface with paver finisher to
the required grade, level and alignment and rolled as
per clauses 501.6 and 507.7 of MORTH
specification, 4th Revision, to achieve the desired
compaction. - Using grade II metal and bitumen
60/70 grade.

5.5 Providing, laying and rolling of built-up spray grout Sqm 3.00
layer over prepared base consisting of a two layer
composite construction of compacted crushed
coarse aggregates using motor grader for
aggregates. Key stone chips spreader may be used
with application of bituminous binder after each layer
and with key aggregates placed on top of the second
layer to serve as a base conforming to the line,
grades and cross-section specified, the compacted
layer thickness being 75mm. (As per MORTH
specification, 4th Revision)

Puducherry Page 997


Code No. Description Unit Bitumen Reqd.per
unit in Kg.
5.6A Providing and laying dence graded bituminous Cum 98.10
macadam with HMP of capacity not less than 40 to
60 TPH using crushed aggregates of specified
grading, premixed with bituminous binder @ 4.0 to
4.5 per cent by weight of total mix and filler,
transporting the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to the
required grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers to
achieve the desired compaction as per Clause 507
of MORTH specification, 4th Revision, complete in all
respects – Using grade-I materials.

5.6B Providing and laying dence graded bituminous Cum 98.10


macadam with HMP of capacity not less than 40 to
60 TPH using crushed aggregates of specified
grading, premixed with bituminous binder @ 4.0 to
4.5 per cent by weight of total mix and filler,
transporting the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to the
required grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers to
achieve the desired compaction as per Clause 507
of MORTH specification, 4th Revision, complete in all
respects – Using grade-II materials.

5.7A Providing and laying semi-dense bituminous Cum 109.615


concrete with HMP of capacity not less than 40 – 60
TPH using crushed aggregates of specified grading,
premixed with bituminous binder @ 4.5 to 5 percent
of mix and filler, transporting the hot mix to work site,
laying with a hydrostatic paver finisher with sensor
control to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per
clause 508 of MORTH specification, 4th Revision,
complete in all respects – Using grade-I material and
bitumen 60/70 grade.

5.8A Providing and laying bituminous concrete with HMP Cum 117.80
of capacity not less than 40 to 60 TPH using crushed
aggregates of specified grading, premixed with
bituminous binder @ 5.4 to 5.6 percent of mix and
filler, transporting the hot mix to work site, laying with
a hydrostatic paver finisher with sensor control to the
required grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers to
achieve the desired compaction as per clause 509 of
MORTH specification, 4th Revision, complete in all
respects – Using grade-I material.

Puducherry Page 998


Code No. Description Unit Bitumen Reqd.per
unit in Kg.
5.8B Providing and laying bituminous concrete with HMP Cum 117.80
of capacity not less than 40 to 60 TPH using
crushed aggregates of specified grading, premixed
with bituminous binder @ 5.4 to 5.6 percent of mix
and filler, transporting the hot mix to work site, laying
with a hydrostatic paver finisher with sensor control
to the required grade, level and alignment, rolling
with smooth wheeled, vibratory and tandem rollers
to achieve the desired compaction as per clause 509
of MORTH specification, 4th Revision, complete in
all respects - Using grade-II material.

5.9A Providing and laying surface dressing as wearing Sqm 1.20


course in single coat using crushed stone aggregate
of specified size on a layer of bituminous binder laid
on prepared surface and rolling with 8-10 tonne
smooth wheeled steel roller - Using 19mm nominal
chipping size. (As per MORTH specification, 4th
Revision)

5.9B Providing and laying surface dressing as wearing Sqm 1.00


course in single coat using crushed stone aggregate
of specified size on a layer of bituminous binder laid
on prepared surface and rolling with 8-10 tonne
smooth wheeled steel roller - Using 13mm nominal
chipping size. (As per MORTH specification, 4th
Revision)

5.10A Providing, laying and rolling of open graded premix Sqm 1.46
surfacing of 20mm thickness composed of 13.2mm
to 5.6mm aggregates either using penetration grade
bitumen or cut-back or emulsion to required line,
grade and level to serve as wearing course on a
previously prepared base, including mixing in a
suitable plant, laying and rolling with a smooth
wheeled roller 8-10 tonne capacity, finished to
required level and grades - Mechanical method using
penetration grade bitumen and HMP of appropriate
capacity not less than 40 to60 tonne/hour. (As per
MORTH specification, 4th Revision)

5.10B Providing, laying and rolling of open graded premix Sqm 2.155
surfacing of 20mm thickness composed of 13.2mm
to 5.6mm aggregates either using penetration grade
bitumen or cut-back or emulsion to required line,
grade and level to serve as wearing course on a
previously prepared base, including mixing in a
suitable plant, laying and rolling with a smooth
wheeled roller 8-10 tonne capacity, finished to
required level and grades - Open graded premix
surfacing using cationic bitumen emulsion. (As per
MORTH specification, 4th Revision)

Puducherry Page 999


Code No. Description Unit Bitumen Reqd.per
unit in Kg.
5.11A Providing, laying and rolling of close-graded premix Sqm 2.195
surfacing materials of 20mm thickness composed of
11.2mm to 0.09mm (Type-A) aggregates using
penetration grade bitumen to the required line, grade
and level to serve as wearing course on a previously
prepared base, including mixing in a suitable plant,
laying and rolling with a smooth wheeled roller 8-10
tonne capacity, and finishing to required level and
grade - Using Type A materials. (As per MORTH
specification, 4th Revision)

5.11B Providing, laying and rolling of close-graded premix Sqm 1.90


surfacing materials of 20mm thickness composed of
13.2mm to 0.09mm (Type-B) aggregates using
penetration grade bitumen to the required line, grade
and level to serve as wearing course on a previously
prepared base, including mixing in a suitable plant,
laying and rolling with a smooth wheeled roller 8-10
tonne capacity, and finishing to required level and
grade - Using Type B materials. (As per MORTH
specification, 4th Revision)

5.12A Providing and laying seal coat sealing the voids in a Sqm 0.98
bituminous surface laid to the specified levels,
grades and cross fall using Type A seal coat. (As per
MORTH specification, 4th Revision)

5.12B Providing and laying of premix sand seal coat with Sqm 0.679
HMP of appropriate capacity not less than 40 to 60
tonne/hour using crushed stone chipping 6.7 mm
size and penetration bitumen of suitable grade -
Type B (As per MORTH specification, 4th Revision)

Puducherry Page1000

You might also like