Professional Documents
Culture Documents
by ConShield Technologies
Capillary/Crystalline
Waterproofing Solutions
for concrete structures
Magnification = 5x
Crystal-X™ AdMix is supplied pre-mixed in a labor time per bag of dry blend alternatives
5 gallon pail. Open and use, store and re-use. and eliminates waste of unused excess mixed
Pre-mixed product eliminates up to 10 minutes dry blends.
Coating for Foundation
Water Proofing
• Specifically designed to waterproof the
exterior surface of concrete and
masonry above and below grade
• Normally applied with a Tampico
brush or can be spray applied
• Not intended as a decorative finish coat
• Used to waterproof foundations above
or below grade or waterproof the back
coating between face brick and
back-up units
Where to Use:
• Sewer pipe
• Manholes
• Bridge decks Features and Benefits:
• Parking structures • One component-easy to use
• Dams • Shrinkage compensated-reduces early shrinkage
• Piers • High early and ultimate compressive strength
• Industrial floors • Compatible modulus to concrete substrate
• Horizontal and formed • Freeze/thaw durable
vertical repairs • Improved placement and workability
• High density provides low permeability
minimizing infiltration of water and
deicing chemicals (salt/chlorides)
™
®
541 Tenth Street NW #233 Atlanta, GA USA 30318,
PH+877.543.2094, FAX +404.420.2160 www.conshield.com
Waterproofing Solutions © Copyright 2012 ConShield Technologies, Inc. biotech armor for concrete
by ConShield Technologies Crystal-X™ is a Trademark of ConShield Technologies, Inc.