2 Air tube 10 Low gas pressure switch 3 Flange (welded shown) 11 Secondary gas valve 4 Carlin 41800 ignitor 12 Primary gas valve 5 Carlin PSC motor 13 High gas pressure switch 6 Cast aluminum housing 14 Manual gas cocks 7 Air flow switch 15 Orifice nipple 8 Gas connection, 1” NPT
Features Specifications Wiring
Converts from propane to natural gas with Input just an orifice change — no conversion kit “B” head/tube................401,000 to 700,000 Btuh needed “C” head/tube............ 550,000 to 1,100,000 Btuh Fires negative or positive chambers from 401,000 to 1,100,000 Btuh input Fuels . ...................................... Natural gas or propane gas Dependable, direct-spark ignition of main flame — for quick, clean light-offs Maximum supply pressure...................14 inches w.c. Minimum supply pressure...................5.0 inches w.c. Time-tested solid state ignition and state- Manifold pressure...............................3.5 inches w.c. of-the-art microprocessor primary control technology Electrical Diagnostic LED lights annunciate operat- Power........................................ 120 vac/60 hz/1-phase ing mode: Self-check, Flame-on, Recycle, Limit circuit input...................................120 vac/60 hz Lockout and Latch-up Motor.................................................... 1/6, 3450 rpm Factory-packaged with combustion con- Current............................................Approx. 2.5 amps trol and gas train (assembled, shipped Fuel valve power....................................120 vac/60 hz loose; also available as knockdown) Shipped completely pre-wired — for easy Ignition installation and start-up (knockdown ver- Carlin Model 41800 solid state electronic ignitor sion also available) Ignition voltage......................................... 9,000 volts High-efficiency, compact flame pattern Control design ensures clean, quiet operation . ......... Carlin Model 60200FR microprocessor control Does not require a refractory liner — fires • 4-sec. Trial for ignition (TFI) with or without a combustion chamber • 1.3-sec. FFRT Swing-away flanged door design • Pre-purge and post-purge • Serviceman reset protection Available with custom welded air tube (Latch-up after three consective lockouts) flange (and/or optional pedestal) to ac- • Interrupted duty ignition • Recycle on flame failure commodate most appliance mounting requirements Agencies Includes 1-year warranty . .......................................... UL Listed (United States)
T e c h s u p p o r t h o t l i n e 800-989-2275
Carlin Combustion Technology, Inc.
70 Maple Street East Longmeadow, MA 01028 Phone 413–525–7700 Fax 413–525–8306 e-mail us at: info@carlincombustion.com vist our website: www.carlincombustion.com