Professional Documents
Culture Documents
Product Data
_______________________________________________________________________________
Form Brownish, Black Liquid
_______________________________________________________________________________
Packaging 25 Kg Pail, 200 Kg Drum
_______________________________________________________________________________
Standards ASTM D 140, ASTM D244, ASTM D977,
BS 434, AASH To M-140
_______________________________________________________________________________
Storage Conditions/ 12 months from date of production if stored properly in
Shelf Life original, unopened packaging at temperatures between -5°C and
25°C. Protect from direct sunlight.
_______________________________________________________________________________
Chemsol Prime Coat
_______________________________________________________________________________
Technical Data
_______________________________________________________________________________
Chemical Base Emulsified Bitumen Emulsion
_______________________________________________________________________________
Particle Size 5 – 6 microns
_______________________________________________________________________________
pH value 9 – 12
_______________________________________________________________________________
Nature Anionic, Alkaline
_______________________________________________________________________________
Residue 55 ~ 62 %
_______________________________________________________________________________
Furol Viscosity @ 25OC 20 – 30 Sec
_______________________________________________________________________________
Setting Time @ 30oC RS – 1
_______________________________________________________________________________
Initial Set Approx. 2 Hours
_______________________________________________________________________________
Final Set Approx. 5 Hours
_______________________________________________________________________________
Settlement (7 days) <3%
_______________________________________________________________________________
Service Temperature Between 5°C and +35°C (dry).
_______________________________________________________________________________
Application Details
_______________________________________________________________________________
Average Consumption 3 to 5m² per kg depending on porosity of the substrate.
_______________________________________________________________________________
Chemsol Prime Coat
_______________________________________________________________________________
Application Instructions
_______________________________________________________________________________
Substrate Quality Clean, sound and dry, homogeneous, free from grease, dust and
loose particles. Paint, laitance and other poorly adhering particles
must be removed. Standard construction rules must be observed.
_______________________________________________________________________________
Substrate Preparation All surfaces must be clean, sound, free from oil and grease and
properly cured. Remove all loose materials, dust and laitance
mechanically with a wire brush, or by grit blasting. Surface may
be dry or slightly damp, but must be free of any standing water.
It is advisable to mask off adjacent areas to prevent possible
discolouration.
_______________________________________________________________________________
Applications Substrate Temperature +5°C min. / +35°C max.
Conditions/ Ambient Temperature +5°C min. / +35°C max.
Laminations Substrate Humidity Maximum moisture content of substrate
should not be greater than 4%.
_______________________________________________________________________________
Application Method/ Tools Apply Chemsol Prime Coat evenly in a thin layer by brush,
roller or by sparying. When Chemsol Tack Coat is applied
directly on Chemsol Prime Coat, it should be applied after the
final setting of Chemsol Prime Coat. Asphalt concrete can be
laid directly on Chemsol Prime Coat after its initial setting.
_______________________________________________________________________________
Cleaning Tools Clean all tools and application equipment immediately after use
with solvent.
_______________________________________________________________________________
Toxicity Non – toxic, Non – hazardous.
_______________________________________________________________________________