ESCUELA PROFESIONAL DE INGENIERIA ELECTRICA
EXAMEN DE ESTABILIDAD DE SISTEMAS DE POTENCIA
PROB N° 01: La maquina sincrona que se muestra en la fig.1 esta generando 100 mega watts y 50
mega vars. El voltaje en la barra infinita “q” es 1.0 + 0 y la reactancia de la linea es 0.05 en una por
Unidad en una base de 100,000 kva. La reactancia transitoria de la méquina es 0.20 por unidad y fa
constante de inercia es 3.5 por unidad en una base de 100,000 kva. Calcular los cambios del angulo
y la velocidad del generador para una falla trifésica en la barra “p” para una duracién de O.1 seg.
Usar el método de Euler, Euler modificado y Runge Kutta de cuarto orden con paso de 0.02 segy
tun tiempo maximo de integracién de 0.2 seg.
PROB N’ 02 : The load flow data in per unit on 2 100,000 kva base for the sample power system
shown in fig. 2is given in tables 1 and 2. The slackis bus 1. The machine data in per unit on a 100,000
kva base is given in table 3.The loads are to be represented as fixed impedances to ground. For a
‘time increment of 0.02 sec. and a maximum time of 1.0 sec. calculate the changes in phase angles
and speeds of the generators for a three-phase fault at the East bus for a duration of 0.01 sec. Use
the following methods and compare the results:
a.-Euler’s method
b.-The modified Euler method
c Runge Kutta method
Table impedances for sample system for prob 2
ius code | impedance | Line charging
Et za | Y'pa/2
2 [ooa+jois | oas
43 [002 +j0.08| 007
24 [00s+jo.to| 0.08
Table 2 Scheduled generation and loads and assumed bus voltages for sample system for prob.2
Generation Toad
Bus code | Assumed | Megawatts | Megavars | Megawatts | Megavars
P__| Bus voltage
1.04+)0 ° 0
o
20
150
1
a2
3
Table 3 Synchronous machine data for sample system for prob.2
Bus code | Inertia Direct-axis
Constant | Transient reactance
P H xd
160.0 oa
3.0 03Prog Hos
exe
Prog #02
West