Professional Documents
Culture Documents
E3022-15
RRES 90061
NDT
AMS 2647
EN ISO 3059
CEN/TR 16638
Global Leaders:
Our products are utilized for hundreds of markets and applications
that demand uncompromising quality and reliability. Spectroline®
lamps and radiometers are widely used by technicians in the field
around the globe – including the military and aerospace sectors, as well
as transportation, oil and gas, mining, fabrication, NDT inspection shops,
alternative energy, and more.
NDT INDUSTRIES
3059
LED BLUE LIGHT LAMPS
450 nm Lamps for Fluorescent Inspections
CEN/TR TRITAN™ 450 SERIES 32-33
16638 OPTIMAX™ 450 34-35
PowerMAX™ 450 36-37
DIGITAL RADIOMETERS
ANSI and NIST Traceable
MEMBER OF
aerochemicals
The uVision™ 365 SERIES is Spectroline’s innovative new line of compact, broad-beam NDT handheld lamps. These lightweight yet
rugged lamps boast an IP65 rating – they are dust-tight and water resistant. Using a state-of-the-art heat sink design, the uVision™
is mechanically cooled without the need for a fan. In addition to three powerful UV-A (365 nm) LEDs, it has a convenient white light
LED for illuminating work areas. Compliant versions have embedded microprocessors to keep lamps within specifications.
Rolls-Royce
RRES 90061
REQUIREMENTS
TO COMPLY WITH
ASTM E3022-15
STANDARD
MEETS
SPECIFICATIONS
EN ISO 3059
Nominal Steady-State
UV-A Intensity < 5,000 μW/cm2 6,000 μW/cm2 < 5,000 μW/cm2 7,000 μW/cm2
at 15 in (38 cm) ➀
UV-A Coverage Area
6 in (15 cm) 6.4 in (16 cm) 6 in (15 cm) 7 in (18 cm)
at 15 in (38 cm)
Diameter Diameter Diameter Diameter
at minimum 1,200 μW/cm2
*These versions are adjusted to ensure that they provide a maximum steady-state UV-A intensity of less than 5,000 μW/cm2 at 15 in (38 cm)
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter, and is factory set to the value shown.
Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An optional 20-foot cord is available. The “/20” suffix denotes the 20-foot power cord options.
Technical Features
Light Source: (3) UV-A LEDs, (1) white light LED White Light LED Intensity: 400 foot-candles (4,306 lux)
Lamp Style: Pistol grip Power Requirements: 100-120VAC / 12VDC*
Lamp Head Diameter: 3.5 in (9 cm) Battery Pack: Type: 12V, NiMH (rechargeable)
Run time: 3.5 hours continuous
Height: 7.5 in (19 cm)
Charge time: 2 hours
Width: 3.5 in (8.9 cm)
Weight: 1.9 lb (0.90 kg) *(Also available in 230V & 240V versions)
LONG-LASTING
THERMAL CUT-OFF
UV-A LENSES
Reduce the rate
CIRCUITRY
Prevents lamp from going
of solarization out of compliance when
internal temperature
exceeds specifications
3 UV-A LEDS
For wide area of *(SBLC model only)
coverage
FANLESS DESIGN
Maintains optimum lamp
Faceplate with temperature using state-of-
INTEGRAL UV-A the-art heat sinks
PASS FILTERS
Reduce visible
wavelengths
ADJUSTABLE
WHITE LIGHT LED
Use to locate
surface flaws SEALED
CONTROL SWITCH
Grip-mounted,
three-way rocker switch
(white light/off/UV)
POWER/BATTERY
LIFE LIGHT
Indicates power level
PISTOL GRIP
Comfortable,
balanced control
BACK VIEW
Y-Inches (cm)
2
2 (5)
1000
μW/cm
4000
0
(0)
200
2000 -2
(-5)
6 (15)
4 (10) -4
0
6
2 (5)
0 (0) UV-365SBLC (-10)
)
m
(15) 4
(c
2 -2 (-5)
(10)
es
0 -6
(5) -4 (-10)
ch
-2 (-15) 6 4 2 0 -2 -4 -6
(0)
In
X-In (-5) -4 -6 (15) (10) (5) (0) (-5) (-10) (-15)
Y-
che -6
(-15)
s (cm (-10)
) (-15) X-Inches (cm)
(15)
5000
6000 (10)
2500
(5)
Y-Inches (cm)
2
4000
μW/cm
1000
(0)
200
2000 (-5)
6 (15)
4 (10)
(-10)
2 (5)
0
6 0 (0) UV-365ES
)
m
(15) 4
(c
2 -2 (-5)
(10)
s
0 (-15)
e
(5) -4 (-10)
ch
X-In (-5) -4 -6
Y-
che -6
(-15)
s (cm (-10) X-Inches (cm)
) (-15)
HIGH-INTENSITY
10000 10000 6
(15)
9000
4
8000 5000 (10)
7000
2
6000 2500 Y-Inches (cm) (5)
μW/cm2
5000 0
(0)
4000 1000
3000 -2
(-5)
2000
200 -4
1000 (-10)
0
6
-6 -4 -2 2 4 (15) -6
(-15) (-10) (-5) 0 -2 0 (10)
UV-365HC +
2 (-15)
(0) (5)
4 6 -6 -4 (-5) (0) (5)
(10) (15) (-15) (-10) m )
X-Inches
(cm) Y-Inc
hes
(c
UV-365MHC -6
(-15)
-4
(-10)
-2
(-5)
0
(0)
2
(5)
4
(10)
6
(15)
X-Inches (cm)
6
10000 10000 (15)
9000
4
8000 5000 (10)
7000 2
Y-Inches (cm)
(5)
6000 2500
μW/cm2
5000 0
(0)
4000 1000
-2
3000 (-5)
2000
200 -4
1000 (-10)
0 -6
6
-6 -4 -2 2 4 (15)
(-15) (-10) (-5) 0 2 -2 0 (10) (-15)
(0) (5)
4 6 -6 -4 (-5) (0) (5) UV-365EH +
(10) (15) (-15) (-10) m) -6 -4 -2 0 2 4 6
X-Inches h es (c UV-365MEH (-15) (-10) (-5) (0) (5) (10) (15)
(cm) Y-Inc
X-Inches (cm)
LONGITUDINAL PROFILE Alternative view of beam profile and useful irradiance zone
10
5000
(25)
8
In addition to providing a traditional transverse projected beam showing intensity
4000
(20)
6
profile distribution upon a surface, we now measure and provide a longitudinal
3000 (15)
4
beam profile for some of our NDT LED UV-A lamps.
2000 (10)
Y-Inches (cm)
1500 2
(5)
The Longitudinal Scan shows irradiance distribution as function of inspection
1200 0
(0)
distance.
1000
-2
300 (-5)
-4
(-10) Longitudinal Scan:
UV-365SBLC Transverse Scan:
-6
(-15) shows irradiance
shows intensity of
-8
(-20) distribution as
beam pattern upon
-10
(-25) function of inspection
16 18 20 22 24 26 28 30 32 34 36 a surface
(40) (45) (50) (55) (60) (66) (71) (76) (81) (86) (91) distance
X-Inches (cm)
UV-365SBLC
uVision™ 365 AC Deluxe Kit
Lamp with in-line AC power supply, UV-absorbing
spectacles, comes in a protective case.
UV-365MSBLC UV-365MEH
uVision 365 AC/DC Mobile Deluxe Kit
™
uVision™ 365 AC/DC Mobile Kit
Lamp with in-line AC power supply, UV-absorbing Lamp with AC power supply, UV-absorbing spectacles,
spectacles, battery pack with 12V rechargeable NiMH battery pack with 12V rechargeable NiMH battery, comes
battery, comes in a protective case. in a padded case.
TRITAN™ 365 SERIES NDT lamps are Spectroline’s signature inspection lamps, and are used around the world for reliable
inspections. TRITAN™ lamps feature three hi-flux UV-A (365 nm) LEDs for fluorescent inspection, plus a convenient white light LED
to locate surface flaws and illuminate dark work areas. Their broad-beam configuration provides an extremely wide coverage area,
while a compact head design allows access into areas inaccessible to larger UV inspection lamps.
Rolls-Royce
RRES 90061
REQUIREMENTS
TO COMPLY WITH
ASTM E3022-15
STANDARD
MEETS
SPECIFICATIONS
EN ISO 3059
Nominal Steady-State
UV-A Intensity 4,500 μW/cm2 7,000 μW/cm2 9,000 μW/cm2 < 5,000 μW/cm2 9,000 μW/cm2 < 5,000 μW/cm2
at 15 in (38 cm) ➀
UV-A Coverage Area
5.5 in (14 cm) 6 in (15 cm) 6.5 in (16.5 cm) 5.5 in (14 cm) 6.5 in (16.5 cm) 5.5 in (14 cm)
at 15 in (38 cm)
Diameter Diameter Diameter Diameter Diameter Diameter
at minimum 1,200 μW/cm2
*These versions are adjusted to ensure that they provide a maximum steady-state UV-A intensity of less than 5,000 μW/cm2 at 15 in (38 cm)
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter, and is factory set to the value shown.
Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An optional 20-foot cord is available. The “/20” suffix denotes the 20-foot power cord options.
Technical Features
Light Source: (3) UV-A LEDs, (1) white light LED White Light LED Intensity: 400 foot-candles (4,306 lux)
Lamp Style: Pistol grip Power Requirements: 100-120VAC / 12VDC*
Lamp Head Diameter: 3.25 in (8.25 cm) Battery Pack: Type: 12V, NiMH (rechargeable)
Run time: 3.5 hours continuous
Height: 8 in (20.3 cm) Charge time: 2 hours
Weight: 1 lb (454 g) Cooling System: Built-in fan
*(Also available in 230V & 240V versions)
8 | THE WORLD LEADER IN NDT FLUORESCENT SURFACE INSPECTION
LED UV-A HANDHELD LAMPS
3 UV-A LEDs
Compliant Broad-Beam
1 White Light Lightweight
Versions* Configuration
LED
RUBBER BUMPER
With Borofloat® glass lens
protects LEDs from damage
BUILT-IN FANS
LONG-LASTING Maintains optimum light
UV-A LENSES output
Reduce the rate of
solarization
THERMAL CUT-OFF
CIRCUITRY
Prevents lamp from going out
of compliance when internal
temperature exceeds specifications
WHITE LIGHT LED *(SBLC model only)
Use to locate surface
flaws
Faceplate with
INTEGRAL UV-A
PASS FILTERS
Reduce visible wavelengths
*(SBLC and HC models only)
EASY CONTROL
Grip-mounted, three-way
rocker switch (white light/off/UV)
TWO REPLACEABLE
CORD CHOICES
Standard or extra-long with
AC plug and rubber boot
127955 128196
STANDARD FACEPLATE FACEPLATE WITH INTEGRAL
UV-A PASS FILTERS
*(SBLC and HC models only)
6
5000 (15)
5000
2500 4
(10)
4000 1000
2
200
(5)
2
Y-Inches (cm)
μW/cm
3000
0
(0)
TRI-365SBLC
2000
-2
(-5)
1000 6 (15)
4 (10) -4
0 2 (5) (-10)
6 0 (0)
)
m
(15) 4
(c
2 -2 (-5) -6
(10) s
0
e
(5) -4 (-10) (-15)(6)
ch
che -6
(-15)
s (cm (-10) X-Inches (cm)
) (-15)
HIGH-INTENSITY
10000 (15)
10000 5000
2500 (10)
8000
1000
(5)
2
200
μW/cm
Y-Inches (cm)
6000
TRI-365HC (0)
4000
(-5)
2000 6 (15)
4 (10)
0 2 (5) (-10)
6 0 (0)
)
m
(15) 4
(c
2 -2 (-5)
(10)
s
0
e
(0) -2
In
che -6
(-15)
s (cm (-10)
) (-15) X-Inches (cm)
LONGITUDINAL PROFILE Alternative view of beam profile and useful irradiance zone
(5)
1200 distance.
1000 0
(0)
300
Longitudinal Scan:
-2
Transverse Scan:
TRI-365SBLC
(-5) shows irradiance
shows intensity of
-4 distribution as
(-10) beam pattern upon
function of inspection
a surface
-6
(-15)
distance
X-Inches (cm)
PS-200A
Industrial Power Supply
PS-300A
In-Line Power Supply
3.5 foot (1.1 m) DC power cord for AC/DC power supply adapter for
129162 “M” SERIES lamps
PSA-250A “M” SERIES lamps
BR-150A Smart AC charger for battery pack W-6 Wall mount with pin*
QUADRAN™ 365 S-SERIES lamps are versatile, broad-beam NDT inspection lamps that are handheld, or can be easily mounted
in place for stationary in-line inspections. These lamps feature four powerful UV-A (365 nm) LEDs plus a convenient white light
LED to quickly switch between fluorescent inspection and flaw location. For increased flexibility, a unique dual, high/low white light
output control.
QDR-365SC QDR-365SA
TESTED
TO COMPLY WITH
ASTM E3022-15
STANDARD
MEETS
SPECIFICATIONS
EN ISO 3059
Nominal Steady-State
UV-A Intensity 3,700 μW/cm2 4,500 μW/cm2
at 15 in (38 cm) ➀
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter, and is factory set to the value shown.
Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An optional 20-foot cord is available. The “/20” suffix denotes the 20-foot power cord options.
Technical Features
White Light LED Intensity: High setting: 300 foot-candles (3,229 lux)
Light Source: (4) UV-A LEDs, (1) white light LED Low setting: 10 foot-candles (108 lux)
Lamp Head Size: 6 x 5.5 in (15 x 14 cm) Cooling System: Built-in fan
BUILT-IN FANS
LONG-LASTING Maintains optimum
UV-A LENSES light output
Reduce the rate of
solarization
Faceplate with
INTEGRAL UV-A
PASS FILTERS
Reduce visible wavelengths
*(SC model only)
RUBBER BUMPER
With Borofloat® glass lens EASY CONTROL
protects LEDs from damage Rear-mounted, three-way rocker switch
(white light/off/UV)
IN-LINE INSPECTION
Lamp handle pin receptacle allows
for easy mounting attachments.
127944 128094
STANDARD FACEPLATE FACEPLATE WITH INTEGRAL
UV-A PASS FILTERS
*(SC model only)
5000
(15)
5000
2500
(10)
4000 1000
200
(5)
Y-Inches (cm)
3000
2
QDR-365SC
μW/cm
(0)
2000
(-5)
1000
6 (15)
4 (10)
0 2 (5) (-10)
6 0 (0)
)
m
(15) 4
(10) 2 -2 (-5) (c
0
s
(5)
e
(0) -2 -4 (-10)
ch
(-15)
) (-15)
X-Inches (cm)
5000
5000 (10)
2500
1000 (8)
4000
200
Y-Inches (cm)
(5)
3000
2
μW/cm
QDR-365SA (0)
2000
(-5)
1000
(-8)
(15) (-10)
(10)
(-15) (5)
(-10) (0)
(-5) (-5) )
(0)
(5) (-10) (cm (-15) (-10) (-5) (0) (5) (10) (15)
X-Inches
(10) (15) (-15) hes
c X-Inches (cm)
(cm) Y-In
LONGITUDINAL PROFILE Alternative view of beam profile and useful irradiance zone
1500
(5)
The Longitudinal Scan shows irradiance distribution as function of inspection
1200
distance.
1000
(0)
300
Longitudinal Scan:
(-5) Transverse Scan:
QDR-365SC shows irradiance
shows intensity of
(-10) distribution as
beam pattern upon
function of inspection
a surface
(-15) distance
(40) (45) (50) (55) (60) (65) (70) (75) (80) (85) (90) (95)
X-Inches (cm)
127922 Particulate filter assembly FP-550 Rubber bumper with Borofloat® glass
Get an EDGE on your overhead inspections with the newest flood lamp series from Spectroline®, the EDGE™ 13 SERIES. Designed
specifically for NDT professionals who require a reliable and rugged overhead UV-A LED lamp for large parts inspection, these
IP65 rated panel lamps are dust-tight and protected against jets of water from all angles. Expand coverage by connecting lamps
together via gang ports. Fanless cooling means fewer headaches. The only overhead NDT lamp series that has all of these features
and comes in a RRES-90061 model.
EDG-13SBLC EDG-13T
TESTED TESTED
TO COMPLY WITH
Rolls-Royce
RRES 90061
REQUIREMENTS
TO COMPLY WITH
ASTM E3022-15
STANDARD
MEETS
SPECIFICATIONS
EN ISO 3059
Nominal Steady-State
UV-A Intensity 4,700 μW/cm2 6,500 μW/cm2
at 15 in (38 cm) ➀
UV-A Coverage Area
14.5 x 13 in 17 x 15 in
at 15 in (38 cm)
(37 x 33 cm) (43 x 38 cm)
at minimum 1,200 μW/cm2
Thermal Cut-Off
Circuitry
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter, and is factory set to the value shown.
Technical Features
Light Source: (13) UV-A LEDs Weight: 14 lb (6.4 kg)
Lamp Style: Panel flood lamp Power Requirements: AC power (main AC power cord supplied with the unit)*
Dimensions (L x W x H): 11 x 14 x 9 in (28 x 36 x 23 cm) Cooling System: Fanless
EDG-13SBLC
GANGABLE
Can be ganged together
to provide an even wider
coverage area
THERMAL CUT-OFF
CIRCUITRY
Prevents lamp from going
out of compliance when
internal temperature
exceeds specifications
*(SBLC model only)
FANLESS
Cool running design
that uses state-of-the-
art heat sinks
INTEGRAL UV-A
PASS FILTERS
Reduces output of wavelengths
longer than 400 nm
*(SBLC model only)
13 UV-A LEDS
Provide large area
of coverage
UV-A LENSES
Virtually eliminate
clouding/solarization
5000 (25)
2500
1000
(12)
Y-Inches (cm)
200
2
μW/cm
(0)
EDG-13SBLC
(-12)
(25) (-25)
(-25) (12)
(-12) (0)
(0) (-12) (-25) (-12) (0) (12) (25)
(12)
m)
X-Inches
(cm)
(25) (-25)
h es (c X-Inches (cm)
Y-Inc
HIGH-INTENSITY
-8
(-20)
10000
-6
10000 5000 (-15)
2500 -4
(-10)
8000
1000
Y-Inches (cm)
-2
(-5)
2
μW/cm
200
6000 0
(0)
EDG-13T 2
4000 (5)
4
(15)
2000 -8 (-20)
-6 6
-4 (-15) (15)
0 -2 (-10)
-10 0 (-5)
)
8
m
(-26) -5 2 (0)
(20)
(c
6 (10)
e
(cm
)
LONGITUDINAL PROFILE Alternative view of beam profile and useful irradiance zone
(45)
5000 (40)
4000 (35) In addition to providing a traditional transverse projected beam showing intensity
(30)
3000
(25)
profile distribution upon a surface, we now measure and provide a longitudinal
2000
1500
(20) beam profile for some of our NDT LED UV-A lamps.
(15)
1200 The Longitudinal Scan shows irradiance distribution as function of inspection
Y-Inches (cm)
(10)
1000 (5) distance.
300 (0)
(-5)
(40)(45)(50)(55)(60)(65)(70)(75)(80)(85)(90)(95)(100)(105)(110)(115)
X-Inches (cm)
EDG-13T EDG-13SBLC
HIGH-INTENSITY: 7,000 μW/cm2 STANDARD-INTENSITY: < 5,000 μW/cm2
*Optional accessory:
gangable cables with connectors (130156)
Replacement Parts and Accessories
PowerMAX™ 365 SERIES flood lamps feature a panel of 16 powerful UV-A (365 nm) LEDs specially engineered for nondestructive
testing (NDT) applications including aviation/aerospace. These versatile, stationary light sources can be installed overhead or in-
line. For applications requiring extremely large coverage area, the PowerMAX™ 365 can be quickly ganged together longitudinally
or back-to-back using customized, easy-to-install connecting plates and brackets.
Rolls-Royce
RRES 90061
REQUIREMENTS
TO COMPLY WITH
ASTM E3022-15
STANDARD
MEETS
SPECIFICATIONS
EN ISO 3059
Nominal Steady-State
UV-A Intensity 4,500 μW/cm2 7,000 μW/cm2 4,500 μW/cm2 8,000 μW/cm2
at 15 in (38 cm) ➀
UV-A Coverage Area
15 x 6 in 16 x 6 in 15 x 6 in
at 15 in (38 cm)
(38 x 15 cm) (40 x 15 cm) (38 x 15 cm)
at minimum 1,200 μW/cm2
Thermal Cut-Off
Circuitry
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter, and is factory set to the value shown.
Technical Features
Light Source: (16) UV-A LEDs Weight: 9 lb (4 kg)
Lamp Style: Panel flood lamp Power Requirements: AC power (main AC power cord supplied with the unit)*
Dimensions (L x W x H): 13.75 x 5.5 x 6 in (35 x 14 x 15 cm) Cooling System: Built-in fan
THERMAL CUT-OFF
CIRCUITRY
Prevents lamp from going
out of compliance when
internal temperature exceeds
specifications
*(SBLC model only)
PM-1600SBLC
INTEGRAL UV-A
PASS FILTERS
Reduces output of wavelengths
16 UV-A LEDS longer than 400 nm
Provide large area
of coverage *(SBLC and HC models only)
LONG-LASTING
UV-A LENSES
Reduce the rate of
solarization
Top View
Top View
-8
5000 (-20)
5000
-6
(-15)
2500
4000 -4
1000
(-10)
Y-Inches (cm)
-2
3000 (-5)
200
2
μW/cm
0
(0)
2000
PM-1600SBLC 2
(5)
1000 4
-8 (-20) (15)
-6 (-15)
-4 6
0 -2 (-10) (15)
-10 0 (-5)
)
m
(-26) -5 2 (0)
(c
8
(-13) 0 4 (5) es (20)
(0) 5 6 (10)
ch
-10 -5 0 5 10
X-In (13) 10 8 (15)
In
HIGH-INTENSITY
-8
10000 (-20)
14000 5000 -6
(-15)
12000 2500 -4
(-10)
1000
Y-Inches (cm)
10000 -2
2
200 (-5)
μW/cm
8000
0
(0)
6000 PM-1600HC
2
(5)
4000
4
2000 -8 (-20) (15)
-6
-4 (-15)
-2 (-10) 6
0 (15)
-10 0 (-5)
)
m
(-26) -5 2 (0)
(c
0 4 (5) 8
(-13)
s
(20)
6 (10)
e
(0) 5
ch
-10 -5 0 5 10
X-In (13) 10 8 (15)
In
(cm
) X-Inches (cm)
LONGITUDINAL PROFILE Alternative view of beam profile and useful irradiance zone
(30) (25)
5000
(25)
4000 (20)
(20) 3000
(15)
(15) 2000
1500 (10)
(10)
Y-Inches (cm)
1200
Y-Inches (cm)
(5) (5)
1000
(0) 300 (0)
(-5)
(-5)
(-10) PM-1600SBLC
(-10)
(-15)
(-15)
(-20)
(-20)
(-25)
(-30) (-25)
(40)(45)(50)(55)(60)(65)(70)(75)(80)(85)(90)(95)(100)(105)(110) (40) (45) (50) (55) (60) (65) (70) (75) (80) (85) (90) (95) (100)(105)
BF-365PM UV-A pass filter assembly UL-110 Long lasting UV-A lens
CENTIMETERS
-7
-170
-160
-6
-150
-140
-130
-5
-120
-110
-4
-100
6 5 U V- 3 6 5 E H 7 i n ( 1 7 . 7
ion™ 3 8 cm
uVis )
-90
+ Q U A D R A N ™ 3 6 5 Q D R -
5 H B 365S
36 A 6.5
TRI- in (
365 S B L C + QUADRAN™ 365 QDR
-
16.
-80
N ™ -3 6 5 3 6 5
5c
I TA U V SC 6 m)
5
-3
T R 3 6 i n (1
o n ™ A N ™ 365 TRI-365SBLC 5.5 in (
14 c 5 cm
isi TRIT m) )
-70
uV
-60
-2
-50
-40
365 SERIES 2.5 in
X™
LU (6.
3c
TI-
-30
m
OP )
-1
-20
-10
0 1 2 3 4 5 6 7 INCHES
NE YOU
HI
R
S
LAMPS
The EagleEye™ 365 DELUXE Kit features the compliant, cool-running EagleEye™ 365 inspection lamp (EE-365SC). It is engineered
with two high-quality UV-A (365 nm) LEDs for inspection, plus a three-LED white light assembly for general illumination. An
adjustable strap allows the lamp to be worn on a hard hat or directly on the head. A unique lamp mount/sprayer attachment permits
the lamp and a spray can to be used together for convenient, single-handed fluorescent yoke inspection. A serialized Certificate of
Conformance to ASTM E3022-15 is supplied with every lamp.
EK-3000SC
Technical Features
TESTED
TO COMPLY WITH
(L x W x H)
EN ISO 3059 Weight: 8 oz (227 g) with battery
Lithium-ion battery
127568 (rechargeable)
LMS-100 Lamp mount/sprayer
LONG LASTING
UV-A LENSES
Faceplate with
INTEGRAL UV-A PASS FILTERS
LED LAMP WITH Reduce visible wavelengths
HEAD STRAP
Option for hands-free
operation
EK-3000SC
EagleEye™ 365 DELUXE Kit
Comes complete with EE-365SC UV-A/white light LED lamp
with a lanyard, head strap, lamp mount, two replacement
splash guards with integral particulate filters, two spare
rechargeable batteries, smart charging cradle with AC and DC
cord sets, UV-absorbing spectacles and padded carrying case.
OPTI-LUX™ 365 SERIES inspection flashlights feature a powerful UV-A (365 nm) LED light source coupled with a rugged anodized
lamp body. They reduce user fatigue while providing an extremely uniform beam profile that surpasses those of more expensive
lamps. Available in four models to suit your specific NDT needs: high-intensity or standard-intensity versions, each with or without
an internal UV-A pass filter. Comes with a Certificate of Light Output for both wavelength and output measurements.
EN ISO 3059
Nominal Steady-State
UV-A Intensity 10,000 μW/cm2 4,500 μW/cm2
at 15 in (38 cm) ➀
UV-A Coverage Area
2 in (5 cm) 2.5 in (6.3 cm)
at 15 in (38 cm)
Diameter Diameter
at minimum 1,200 μW/cm2
Filter/Faceplate Clear filter UV-A pass filter Clear filter UV-A pass filter
Visible Light 0.8 foot-candles 0.4 foot-candles 0.3 foot-candles 0.2 foot-candles
Measurement (8.6 lux) (4.3 lux) (3.2 lux) (2.1 lux)
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter, and is factory set to the value shown.
Technical Features
Light Source: (1) UV-A LED Power Requirements: (1) 3.7V 2600mA/Hr lithium-ion battery
(rechargeable)
Lamp Style: Cordless flashlight
Lamp Head Diameter: 1.25 in (3.2 cm) Run Time: 4 hours (continuous)
Length: 5.9 in (15 cm) Charge Time: 4 hours (one or two batteries)
Weight: 4.6 oz (130 g) with battery Charging Cradle: Two-battery capability with AC and DC cord sets*
*(Also available in 100-120V, 230V & 240V versions)
127423 Dome lens 128217 Smart charging cradle with AC and DC cord sets
127568 Lithium-ion battery (rechargeable) BF-365LX External UV-A pass filter with rubber bumper
CONVENIENT
ON/OFF SWITCH
For easy one-handed
operation
BF-365LX
External UV-A pass
filter accessory
ANODIZED ALUMINUM
LAMP BODY
Minimizes corrosion and stands
up to years of heavy use
OPTI-LUX™ 365
SERIES Flashlight Kit
Come complete with OPX-365 LED UV-A (365 nm)
lamp with lanyard, two rechargeable batteries, smart
charging cradle with AC and DC cord sets, UV-absorbing
spectacles, belt holder and a hard carrying case.
1000
Y-Inches (cm)
0
0
2
200 (0)
μW/cm
(0)
2
200
μW/cm
-1 -1
(-3) (-3)
-2 -2
(-5) (-5)
-3 -3
(-8) (-8)
(5)(8) -3 -2 -1 0 1 2 3 -3 -2 -1 0 1 2 3
(0)
(3) (-8) (-5) (-3) (0) (3) (5) (8) (-8) (-5) (5) (8) (-8) (-5) (-3) (0) (3) (5) (8)
(-8) (-5) (-3) (-3) (3)
(-3) ) (0) 3 (0)
(cm
(0) (-5) (3) (-3)
(3) (5) es
X-Inches (cm) X-Inch (5) (-5) m) X-Inches (cm)
(8)(-8) es (cm (8) (-8) s (c
X-Inches nch ) che
(cm) Y-I Y-In
The cordless OPTIMAX™ 365 OPX-365 is ergonomic, compact and lightweight. It’s designed to provide ultimate freedom of
movement during inspections. With an ultra-high-intensity output, it’s our most powerful UV-A (365 nm) LED flashlight.
OPX-365
Technical Features
Light Source: (1) UV-A LED
Nominal Steady-State
UV-A Intensity 18,000 μW/cm2 Lamp Style: Cordless flashlight
at 15 in (38 cm) ➀
Lamp Head Diameter: 2 in (5.1 cm)
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter,
and is factory set to the value shown.
ANODIZED ALUMINUM
LAMP BODY
Minimizes corrosion and stands
up to years of heavy use
CONVENIENT
ON/OFF SWITCH
For easy one-handed
operation
ELECTRONIC INTENSITY
STABILIZER
Assures consistent
performance
CHARGE STATUS
INDICATOR LIGHT
OPX-365
OPTIMAX™ 365 Kit
Comes complete with OPTIMAX™ 365 (365 nm) lamp,
smart AC and DC chargers, UV-absorbing spectacles, belt
holder and hard carrying case. AC charger available in
120V, 230V, 240V or 100V versions.
16000 16000 -1
(-2.5)
12000 12000
-0.5
(-1.5)
Y-inches (cm)
10000 10000
μW/cm2
0
8000 8000 (0)
6000 0.5
6000 (1.5)
4000 4000 1
-2 (-5) (2.5)
2000 -1.5 (-4) 2000
-1 (-2.5) 1.5
-2
0 (4)
-0.5
(-1.5)
(-5) -1.5 -1 0 (0) ) OPX-365 2
(-4) -0.5 m
(-2.5) 0 1 (c (5)
(-1.5)
(0) 0.5 1.5 (2.5) s
1
(1.5) (2.5) 1.5 (4) he -2 -1.5 -1 0 1 1.5 2
nc
2 (-5) (-4) (-2.5) (0) (2.5) (4) (5)
X-inc 2 (5) i
he s (cm (4)
(5) Y-
) X-inches (cm)
Features three cool-running, ultra-high flux blue light (450 nm) LEDs with a broad-beam configuration. This powerful lamp
provides a wider coverage area than conventional inspection lamps, while its compact head design allows access into areas
inaccessible to larger inspection lamps. Ideal for most nondestructive testing applications, including use in some ambient
light conditions!
TRI-450B TRI-450MB
Technical Features
Light Source: (3) Blue light LEDs
MEETS
SPECIFICATIONS
Nominal Steady-State
Length: 8 in (20.3 cm)
Blue Light Intensity 9,500 μW/cm 2
Weight: 1 lb (454 g) with battery
at 15 in (38 cm) ➀
Power Requirements: TRI-450B: 100-120VAC
TRI-450MB: 100-120VAC/12VDC
(Also available in 230V & 240V versions)
Blue Light Coverage Area Battery Pack: Type: 12V, NiMH (rechargeable)
5 in (13 cm) Run time: 3.5 hours continuous
at 15 in (38 cm)
Diameter Charge time: 2 hours
at minimum 2,000 μW/cm2
➀ Blue Light intensity reading taken with the Spectroline® AccuMAX™ Series meter,
and is factory set to the value shown.
Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of
destination. An optional 20-foot cord is available. The “/20” suffix denotes the 20-foot
power cord options.
Fluorescence-enhancing
BR-150A Smart AC charger for battery pack UVS-40 spectacles, yellow
BUILT-IN FANS
Maintains optimum
light output
BLUE
LIGHT
LED
3 BLUE LIGHT
LEDS
For wide area
of coverage
PATENTED,
THIN-FILM
DICHROIC LENS
With rubber bumper protects
LEDs from damage, improve
contrast and fluorescent
response
TWO REPLACEABLE
CORD CHOICES
Standard or extra-long with
AC plug and rubber boot
TRI-450MB
TRITAN™ 450MB Kit
Portable, battery-operated AC/DC lamp kit. Includes
TRITAN™ 450 LED blue light lamp, rechargeable NiMH
battery pack, power supply adapter with AC/DC cord
sets, smart AC charger, fluorescence-enhancing yellow
spectacles and padded carrying case.
The OPTIMAX™ 450 OPX-450 is a versatile, cordless inspection lamp, featuring a high-intensity blue light (450 nm) LED. The
anodized aluminum lamp body minimizes corrosion and stands up to years of heavy use, and our patented, thin-film dichroic lens
filters out long-wave visible light. Electronic Intensity Stabilizer assures consistent performance. Beam strength will not weaken
between charges. Powered by a rechargeable NiMH battery. Provides 90 minutes of continuous inspection between charges.
OPX-450
Technical Features
Light Source: (1) Blue light LED
MEETS
SPECIFICATIONS
Fluorescence-enhancing spectacles,
CC-365 Hard carrying case UVS-40 yellow
Bright &
Rechargeable Uniform Instant-on 90 Minutes Works In
NiMH Battery Beam Operation Run Time Daylight!
ANODIZED ALUMINUM
LAMP BODY
Minimizes corrosion and stands
up to years of heavy use
CONVENIENT
ON/OFF SWITCH
For easy one-handed
operation
BLUE
LIGHT
LED
PATENTED,
THIN-FILM
DICHROIC LENS
Improve contrast and
fluorescent response
OPX-450
OPTIMAX™ 450 Kit
Comes complete with OPTIMAX™ 450 LED
blue light lamp, smart AC and DC chargers,
fluorescence-enhancing yellow spectacles,
belt holder and rugged, hard carrying case.
6000 (-3)
2
2000
μW/cm
5000 0
(0)
4000
1000 1
3000 (3)
2000 -4 (-10) 2
1000 -3 (-8) OPX-450 (5)
-2 (-5)
3
0 -1 (-3)
-4 -3 (8)
0 (0)
)
(-10)
(-8) -2
m
-1 1 (3) 4
(c
(-3) 1
e
(0) -4 -3 -2 -1 0 1 2 3 4
ch
2 3 (8)
X-in (3) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
in
3
che (5) 4 4 (10)
Y-
The PowerMAX™ 450 PM-1600B flood lamp features a panel of 16 powerful blue light (450 nm) LEDs specially engineered for
nondestructive testing applications when limiting the use of UV-A light is a requirement. This versatile, stationary light source can
be installed overhead or in-line, and can be ganged together to provide an even wider coverage area.
PM-1600B
Technical Features
Light Source: (16) Blue light LEDs
Nominal Steady-State
Blue Light Intensity 10,000 μW/cm2 Lamp Style: Panel flood lamp
at 15 in (38 cm) ➀
Dimensions: 13.75 x 5.5 x 6 in (35 x 14 x 15 cm)
(L x W x H)
➀ Blue Light intensity reading taken with the Spectroline® AccuMAX™ Series meter,
and is factory set to the value shown.
EASILY MOUNTABLE
For overhead inspection
or in-line applications
BUILT-IN FANS
Maintains optimum
light output
BLUE
LIGHT
LED
PATENTED,
THIN-FILM
DICHROIC LENS
Improve contrast and
fluorescent response
These super-powerful lamps make NDT inspections easy. They feature micro discharge light (MDL) technology with a fatigue-free
ergonomic design. Deliver up to 10 times the UV-A output of conventional HID inspection lamps. They have a lightweight, solid-state
ballast and integral bulb/reflector assembly. Stay-cool, impact-resistant and dent-proof housing. Prefocused at the factory.
Nominal Steady-State
UV-A Intensity 50,000 μW/cm2 5,700 μW/cm2 50,000 μW/cm2
at 15 in (38 cm) ➀
UV-A Coverage Area
6 in (15 cm)
at 15 in (38 cm)
Diameter
at minimum 1,200 μW/cm2
Ultra-High-intensity Output
➀ UV-A intensity reading taken with the Spectroline® AccuMAX™ Series meter, and is factory set to the value shown.
*These versions are adjusted to ensure that they provide a maximum steady-state UV-A intensity of less than 5,000 μW/cm2 at 15 in (38 cm)
NOTE: All models come standard with 8 foot (2.4 m) primary and secondary cords
STAY-COOL
Impact-resistant and
dent-proof housing
LIGHTWEIGHT
Solid-state ballast
INTEGRAL BULB
Reflector assembly
INSTANT
ON/OFF/RESTRIKE
Grip-mounted, three-way
rocker switch
ML-3500MS
-3
20000 (-8)
50000
-2
10000 (-5)
40000
-1
Y-inches (cm)
(-3)
4000
2
μW/cm
30000 0
(0)
2000
1
20000 (3)
1000
2
10000 -4 (-10) (5)
-3 (-8)
-2 (-5) 3
0
-1 (-3) ML-3500S (8)
-4 0 (0)
-3
)
4
m
(-10) -2 1 (3)
(c
(-8) -1 (10)
(-5) 2 (5)
s
0 -4 -3 -2 -1 0 1 2 3 4
e
(-3) 1
ch
(0) 3 (8) (-10) (-8) (-5) (-3) (0) (3) (5) (8) (10)
X-in 2
in
s (5) 4
(cm (8) X-inches (cm)
) (10)
These super-powerful and versatile lamps have been specially engineered for fluorescent penetrant and magnetic particle inspection,
parts degreasing inspections and wash station inspections. Powerful, 400-watt metal halide bulb, combined with tempered, heat-
resistant low solarization UV filters provide the highest intensity over the largest area.
TWIN-FILTER
SYSTEM
Eliminates hazardous
UV-B and UV-C
radiation escaping
from lamp
UV-400A UV-400B
6000
2
μW/cm
1000 0
μW/cm
5000 0
1000 (0) (0)
4000
4000 -5
5 (-13)
3000 (13)
2000
-15 (-38)
UV-400A 10
2000 20(50) UV-400B -10
(-25)
-10 (-25) (25) 15 (38)
1000 10 (25) -15
-5 (-13) -5 (13) (-38)
0 0 (0) 20 0 (0)
15 -20
(50) 15
)
-15
)
-5 (-13)
m
-10
m
(-38)
(c
-15 (-38)
e
5 (0)
ch
ch
X-in
(0)
(13) 10 15 (38) (-38) (-25) (-13) (0) (13) (25) (38) X-in (-13) -10 -15 -20 (-50) (50) (38) (25) (13) (0) (-13) (-25) (-38) (-50)
in
in
(25)
Y-
INCLUDES
INCLUDES BULB
BULB EXTENDER*
EXTENDER* for BIB-150P/F
for BIB-150P lamps (230V)
lamps (120V)
Works seamlessly in conjunction with the VIVID™ -VS- MERCURY BULB COMPARISON
following Spectroline® HID lamps, saving you
both time and money on bulb changes: VIVID™ LED BULB MERCURY BULB
Surface Contour Profile at 15 in (38 cm) Surface Contour Profile at 15 in (38 cm)
Current Replacement
Lamp 5000
5000
5000
5000
μW/cm2
0 8 0 8
-8 -6 6 -8 -6 6
(-20) -4 2 4 (15)(20) (-20) -4 2 4 (15)(20)
BLE-150CS-115/M
(-15) (-10) -2 0 -2 0 (5) (10) (-15) (-10) -2 0 -2 0 (5) (10)
2 2
(-5) (0) 4
(5) (10) 6 -6 -4 (-5) (0) (-5) (0) 4
(5) (10) 6 -6 -4 (-5) (0)
8 -8 (-10) 8 -8 (-10)
X-Inche
s (cm)
(15) (20)(-20)(-15) (cm) X-Inche
s (cm)
(15) (20)(-20)(-15)
es (c
m)
Y-In ches Y-Inch
Y-Inches (cm)
(5) (5)
0 0
(0) (0)
-2 -2
(-5) (-5)
BULB-SAVER™
(-20) (-20)
increasing longevity.
X-Inches (cm) X-Inches (cm)
The AccuPRO™ XP-2000 readout unit features a single dual-wavelength sensor detector designed to measure both ultraviolet and
visible light, and is compliant with ASTM 2297. The AccuPRO™ Plus XP-4000 features a single 3-in-1 multi-purpose sensor that
measures ultraviolet, visible and blue light.
LARGE
LCD SCREEN
4-digit autoranging
MULTI-
display
WAVELENGTH
SENSOR
Sealed sensor with
water-resistant
PROTECTIVE housing
RUBBER HOUSING
Rugged meter for better
grip and to help prevent
accidental breakage
THREE-
BUTTON
INTERFACE
Toggle between
light measurement
modes
KEY FEATURES:
Overall accuracy greater than ± 5% per NIST standards
Superior band-pass interference filter provides excellent cosine response
One-touch PEAK with reset functions
User-defined power save and automatic shutoff UV-A VISIBLE BLUE
Multi-wavelength sensor directly attached to meter by 3 ft (0.9 m) cord LIGHT LIGHT LIGHT
Convenient on-board recharging
Powered by four rechargeable “AAA” nickel-metal hydride batteries (included)
XP-2000 XP-2000
Comes complete with AC charger and padded carrying case
XP-4000 XP-4000 XP-4000
Technical Features
Readout Unit
Resolution 4-digit autoranging display
Screen 128 x 64 dot pixel chip on glass STN transmissive monochrome
LCD 2.25 in (5.7 cm) diagonal illuminated (backlit)
Read Update 2 Hz
Overall Accuracy Better than + 5% with reference to NIST standards
Temperature Coefficient + 0.025%/°C (0 to 50°C)
Power Requirements Four “AAA” nickel-metal hydride batteries (rechargeable). AC charger included.
Available in 120V, 230V, 240V or 100V versions.
Dimensions
Length 6.0 in (15.2 cm)
Width 3.0 in (7.6 cm) XP-2000 AccuPRO™ ASTM 2297
Thickness 1.0 in (2.5 cm) Dual Sensor (UV-A/VIS) Compliant
Weight 8 oz (227 g) Sensitive to UV and Visible Light
Wavelength/Measurement Range
Sensor Detector UV-A (365 nm) Irradiance 0-100 mW/cm2
Length 3.0 in (7.6 cm) Visible (555 nm) Illuminance 0-5,382 Lux (0-500 fc)
Width 2.0 in (5.1 cm)
Thickness 0.5 in (1.3 cm) XP-4000 AccuPRO™ Plus Conforms to
3-in-1 Sensor (UV-A/VIS/Blue) CEN/TR 16638
Weight 5.6 oz (159 g)
Sensitive to UV, Visible and Blue Light
Spectral Range Wavelength/Measurement Range
UV-A Sensor 320-400 nm
UV-A (365 nm) Irradiance 0-100 mW/cm2
Visible (555 nm) Illuminance 0-5,382 Lux (0-500 fc)
Visible Sensor 460-675 nm Blue (450 nm) 0-100 mW/cm2
Blue Light Sensor 410-475 nm (XP-4000 only)
10
.9
.8
.7
Relative Spectral Response
.6
.5
.4
.3
.2
.1
0
0 300nm 350nm 400nm 450nm 500nm 550nm 600nm 650nm 700nm 750nm
Wavelength (nm)
The MOST advanced, microprocessor-controlled readout system. The AccuMAX™ XRP-3000 is compact, lightweight and battery-
operated for convenient use in the factory, field or any other location where measurements need to be taken. Measures both
ultraviolet and visible light. Complies with ASTM specifications for MPI and FPI and the ASTM 2297 standard. Specially engineered
for NDT applications.
UV-A VISIBLE
LIGHT LIGHT
PROTECTIVE RUBBER
HOUSING
Rugged meter for better
grip and to help prevent
accidental breakage
KEY FEATURES:
Microprocessor-controlled readout unit with dual-wavelength sensor detector
Superior bandpass interference filter
Choice of direct or USB connection between sensor detector and readout unit
Excellent cosine response
Sealed sensor housing and USB connection with water-resistant adapter
Dimensions
Height 3.2 in (8.1 cm)
Length 3.0 in (7.6 cm)
Width 2.1 in (5.3 cm)
Weight 6.4 oz (181 g)
Luminance Range
0 - 1,000,000 cd/m2
0 - 90,000 cd/ft2
0 - 285,000 fL
Technical Features
.8
Spectral Range
.7
Relative Spectral Response
Dimensions .4
Page 1 of 6
CERTIFICATE OF CONFORMANCE
VALIDATION REPORT
MODEL NUMBER: TRI-365SBLC SERIAL NUMBER:
MODEL NUMBER: TRI-365SBLC SERIAL NUMBER: STANDARD: ASTM E3022; Type A PART NUMBER:
STANDARD: Rolls-Royce RRES 90061 PART NUMBER:
TEST PARAMETERS TYPE TEST - NOMINAL UNIT TEST APPARATUS 6.0 MANUFACTURER MODEL NUMBERS
DESCRIPTIONS UV-A/Visible Meter (6.1) Spectronics Corporation AccuMax XRP-3000*
INITIAL AFTER Ts MAX TEMP. AFTER Ts (aperture width 0.5 in.)
SWITCH ON Spectroradiometer (6.2) StellarNet UVI S3-25, NIR 3-25
Minimum Working 5,000 µW/cm2 NA 15 inches NA
Distance (38.1 cm) Spectrophotometer (6.3) StellarNet UVI S3-25, NIR 3-25
Maximum 1,200 µW/cm2 NA 25 inches NA
Working Distance (63.5 cm)
LAMP ACCEPTANCE TEST (8.1)
Peak Wavelength 365 +/- 5 nm 367 +/- 2 nm 367 +/- 2 nm 368 +/- 2 nm
Requirements At Ambient: 77F (25 C)
50% Max FW < 20 nm 10 +/- 1 nm 10 +/- 1 nm 10 +/- 1 nm (Stabilization, 10 min)
(FWHM) Maximum Irradiance (7.3) At 15 inches (38 cm) µW/cm2
50% Max +/- 10 nm -5 /+ 6 nm -5 /+ 6 nm -5 /+ 6 nm
Emission Spectrum (7.6.4.6) Min range 300-400nm See Figure 1.0 - Pg. 2
10% Max FW < 30 nm 22 +/- 3 nm 22 +/- 3 nm 22 +/- 3 nm Peak Wavelength (7.6.4.7) 360 to 370nm nm
10% Max +/- 15 nm -10 /+ 15 nm -10 /+ 15 nm -10 /+ 15 nm FWHM (7.6.4.8) ≤15nm nm
Visible Light <20 Lux at Minimum Dist 2.15 Lux 2.15 Lux 2.05 Lux Visible LED Light (555nm) at 15 in. (38cm) >200 fc (2150 Lux) Fc ( Lux)
Output <5 Lux at Maximum Dist (0.20 fc) at Min (0.20 fc) at Min (0.19 fc) at Min
*TL70 is defined as seventy percent of factory tested intensity and TL50 is defined as fifty percent of factory tested intensity. These figures are valid
for this model provided that the lamp is operated in accordance with manufacturer's instructions and remains in normal working condition. Users
should be knowledgeable in the technology to an extent that ensures this model is maintained correctly. The statement of these figures in no way
extends the standard warranty period beyond that stated in the manufacturer's Warranty Certificate included with each unit.
Inspector:
Ken Guidorizzi - Quality Manager 5/16 AM15041
Date: ________________ Printed in the U.S.A
956 Brush Hollow Rd, Westbury, NY 11590 ● PHONE: 516-333-4840 ● FAX: 516-333-4859 ● WWW.SPECTROLINE.COM 956 Brush Hollow Rd, Westbury, NY 11590 ● PHONE: 516-333-4840 ● FAX: 516-333-4859 ● WWW.SPECTROLINE.COM
ISO 9001:2008
Compliance with the new ISO standard reinforces the confidence that customers have in Spectronics Corporation’s commitment
to quality, not only in the present but also in the future.
Warranty
All equipment is warranted against defects in manufacture. Spectronics Corporation’s obligation under this warranty is limited to repairing or replacing, at the
option of Spectronics Corporation, any part(s) of the product which, if properly installed, used and maintained, proves upon factory examination to have been
defective in materials or workmanship within 12 months from the date of delivery to the customer, including LEDs and BLE-LED bulb.
This warranty does not apply to any component which (1) is normally consumed in operation or (2) has a normal life inherently shorter than the warranty
stated. For example, bulb, filters and rechargeable batteries are warranted for 30 days; the 100S/M-PQL bulb is warrantied for 90 days. In addition, Spectronics
Corporation does not warrant any instrument that has been subjected to misuse, negligence or accident, or has been repaired or altered by anyone other than
Spectronics Corporation.
This warranty is in place of all other warranties of quality. There are no other warranties either oral, written, express, implied or statutory. IMPLIED WARRANTIES OF
FITNESS FOR PURPOSE AND MERCHANTABILITY ARE EXCLUDED. This warranty and your remedies thereunder are solely as stated in this form. In no event shall
Spectronics Corporation be liable for special, indirect, incidental or consequential damages, nor for any damages arising out of delay in shipment or production.
Spectronics Corporation reserves the right to alter product specifications without notice. Spectronics is under no obligation to make similar changes in its products previously produced.
Company Background
Since 1955, Spectronics Corporation has
been the industry leader of inventing
and manufacturing fluorescent dyes and
materials. More than six decades since its
inception, the goal of Spectronics is still the
same — to produce effective, top-quality
products that are on the cutting edge of
today’s technology with the utmost dedication
to customer satisfaction.
SOLUTIONS FOR
THE NDT TECHNICIAN.
MEMBER OF
aerochemicals
FOLLOW US:
NDT
03/18 A17323-3
PRINTED IN USA