Professional Documents
Culture Documents
Product
Identification
Guide
Ver 15.07.03
Have You Ever Wanted A Supplier That Spoke Your Language?
We believe that you need the Right Product, At The Right Time, For The Right Price.
With a stock holding of over 55 ,000 parts and nationwide access to all major
manufacturers and importers, we are able to facilitate a solution to all your sealing issues.
It combines two separate catalogues that complement each other – Profile Identification
Guide & Part Number Definition Guide – to aid in the seal identification process.
Profile Identification Guide allows you to quickly determine a part number prefix based on
a cross sectional diagram of your sample seal. It provides easy to access information to
determine if a profile is suitable for your application. This includes available materials,
pressure ratings and operating speeds.
Part Number Definition Guide will assist in breaking down AB Seals part numbers for
easier recognition of components on paperwork such as invoices or quotes. It also helps in
determining a part number used to order products for your needs. A quick reference profile
is provided but doesn’t give the operating conditions that you find in the identification guide.
Profile designs and colours provided in this guide are indicative of final product.
Refer the AB Seals sales team with any enquiries.
HYDRAULIC / Nitrile 70 Duro (N7) Best combination of oil resistance and physical
PNEUMATIC SEALS properties for hydraulics, cold water applications
Nitrile 90 Duro (N9) Harder than N7, better for fittings and high extrusion risk
application
O-RINGS
FKM. High temperature, wide range (not universal)
Viton 75 Duro (V7)
chemical resistance, fuel, diesel and thinners resistant.
Black in colour
WIPERS Viton 90 Duro (V9) Harder than V7, better for fittings and high extrusion risk
applications.
Viton 75 Duro (VB) FKM. High temperature, wide range (not universal)
ROD SEALS chemical resistance, fuel, diesel and thinners resistant.
Brown in colour
EPDM 80 Duro (E8) Ethylene Propylene. Brake fluid resistant, excellent for
PISTON SEALS hot water and steam to 130°C
Neoprene 70 Duro (C7) Chloroprene. Used with older refrigerants and with
Ammonia. Excellent ozone and weather resistance.
WEAR RINGS
Silicone 70 Duro (S7) MVQ. Rust colored. Normally food grade. Low tear and
abrasion resistance, low tensile strength. Temperature
range -59° to + 230° C. Excellent ozone and weather
ROTARY SEALS resistance.
Fluorosilicone 70 Duro (F7) Sky blue in color. Excellent cryogenic properties -73° to
+177° C. Requirement for fuel pumps & aviation fuel
MECHANICAL SEALS under many standards
Polyurethane 90 Duro (P9) Excellent wear resistance and tensile strength, low
flexibility. Often used in porta-power, high pressure
applications or as gland cap O-Rings.
Solid PTFE (TF) Poor elastic properties but almost universal chemical
HYDRAULIC / compatibility. Temperature range from -200° to +260°
PNEUMATIC SEALS C. Used where friction is a concern.
WIPERS
Aflas® 75 Duro (AF) Excellent chemical compatibility and temperature range -
4° to +232° C
WEAR RINGS All these O-Rings are of the highest quality. Cheaper O-Rings are available in bulk for
light duty and water applications, and are supplied under a different part code sequence
We also carry metric O-Rings to suit German DIN and Japanese Industrial Standard (JIS
ROTARY SEALS B2401). These are available in N7 and V7 as standard. Some sizes may be available in
N9 and S7, particularly in the JIS Range.
AB Seals
Seals you can rely on
Ver 15.06.24
AB SEALS Seals you can rely on
3 WELCH STREET UNDERWOOD QLD 4114 1/1880 HUME HWY, CAMPBELLFIELD, VIC 3061
www.abseals.com.au Ph - (07) 3341 1200 E-Mail - sales@abseals.com.au Ph - (03) 9357 0451 E-Mail - vicsales@abseals.com.au
O-RINGS
O-Rings
Material code
AF = Aflas N = Nitrile, NBR, Buna N
C = Neoprene / Chloroprene P = Polyurethane
E = EPDM / Ethylene Propylene S = Silicone / MVQ
F = Flourosilicone / FMVQ TF = Solid PTFE
FEP = Teflon Encapsulated V = Viton / Fluorocarbon / FKM
HN = HNBR
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
BACKUP RINGS
Backups
BU - 010 - T
Style Code
British Standard Size Reference Material if not NBR
(THIN = reduced Thickness not C/S)
SEAL BACKUPS
SBUI- 0150 0200 - 006 T
Material
Style Code Thickness in 1/100"
006 = 0.062"
Inside Diameter in 1/100"
0150 = 1.500" Outside Diameter in 1/100"
0200 = 2.000"
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
Flexible wiper, square
WDH
shoulder, twin lip
I/M b b b b 2
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
Flexible wiper, flapped
WFL
lip
I/M b b 2
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
WMC Metal cased wiper I/M b b 1
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
WSG Scraper, Brass + NBR I b 1
Scraper, 2 piece,
WSO
external clip over
I b 1
Urethane - (U)
Virgin PTFE - (T)
Fabric NBR - (R)
Phenolic Resin - (P)
Nitrile - (N)
Brass - (M)
b b b b b
b
PROFILE GUIDE
I/M
I/M
Excluder. Specs are for
Description
default material B
Scraper, WYCLIP
Variant design
Primary design
Style
WTW
WWY
AB SEALS
PART NUMBER DEFINITION GUIDE
FLEXIBLE WIPERS
IMPERIAL FLEXIBLE WIPERS
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
FLEXIBLE WIPERS
METRIC FLEXIBLE WIPERS
WTW/B WTW/1
(PTFE/NBR) (PTFE/Viton)
MET MET
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PROFILE GUIDE
SINGLE ACTING
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
SA seal, rod, telescopic
SAL
cylinder retrofit only
I/M b 2 400 0.5
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
SA seal, piston, anti
SPA
extrusion ring
I/M b b 1 700 1
SA seal, piston
SPE
energised, dual lip
I/M b 1 400 1
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
SPU SA seal piston I/M b b 1 400 1
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
SA seal, rod, dual lip,
SREI
energised
I b b 1 400 1
SA seal, antiextrusion
SRF
ring, Faric reinforced
I/M b 1 700 0.5
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
SA seal, universal,
SUA
energised, sharp lip
I b b b 1 350 0.5
SA seal, universal,
SUB
energised, bevel lip
I/M b b b 1 350 0.5
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
Vee bottom or male
SVC/M
adaptor
I b b b 2 400 0.5
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
VEE PACKING
VEE COMPONENTS AND SETS, AND REPLACEMENTS
imperial Components
The height measurement given in the description is the exposed edge height of each component once pack is
assembed.is assembled.
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
VEE PACKING
VEE SETS AND REPLACEMENTS
Composition of DR, DRM. VS & MVS varies brand to brand, size to size.
If a specific requirment exists contact sales staff
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
LPB30
(Leather)
IMP
Many cups are manufactured blank (no hole) with a centre mark.
LPB30 09.000
Style Code
Outside diameter in inches
Note: Leather is organic and is susceptible to dimensional variance with environmental factors.
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
1
Urethane - (U)
Virgin PTFE - (T)
Fabric NBR - (R)
BUFFER RINGS
Brass - (M)
AB SEALS
b b b b
I/M
I/M
I/M
I/M
Buffer, 2 pce Hallite
Description
SRG
SBH
SBY
SBI
AB SEALS
PART NUMBER DEFINITION GUIDE
BUFFER RINGS
BUFFER RINGS
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PROFILE GUIDE
DOUBLE ACTING
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
DAE DA seal, piston, 5 piece I/M b 1 400 0.5
DA seal, accumulator /
DAQ
creep resistant
I/M b 1 350 2
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
DCS DA seal, crown seal I b b 1 350 1
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
DA seal, piston. Non
DHE
standard. Hallite Type 57
I/M b 2 700 0.5
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
DA seal, piston, J-seal
DJW
with wear ring
I b 1 300 0.5
DA complete piston,
DPC double cup, spring M b - 60 0.5
energised. TDUOH
DPG/B,
DPG/C, DA seal, piston, glide ring I/M b b b 1 350 4
DPG/F
DPG/1B,
DA seal, piston, glide
DPG/1C,
ring. Square energised
I/M b b b 1 350 4
DPG/1F
AB SEALS
PROFILE GUIDE
DOUBLE ACTING
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
DPG/E DA seal, piston, glide ring I/M b 1 350 1
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
DA seal, piston, glide
DPG/3U
ring. Square energised
I/M b 1 250 1
Housing 1 or 2 piece?
Phenolic Resin - (P)
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
DSH DA seal, static head seal M b 400 0
700
Housing 1 or 2 piece?
Viton - (V)
b
Urethane - (U)
Virgin PTFE - (T)
DOUBLE ACTING
Nitrile - (N)
AB SEALS
Brass - (M)
Nylon/Glass Nylon - (N)
Fibreglass filled PTFE - (F)
PolyEster - (E)
Carbon filled PTFE - (C)
Bronze filled PTFE - (B)
Acetal / Pom - (A)
Sizing
(I/M)
I
DA seal, piston, Uniring.
Laminated urtehane
Description
Retrofit only
Style Primary design Variant design
DTW
DUS
DUL
AB SEALS
PART NUMBER DEFINITION GUIDE
Glide ring designs (hard dynamic ring over rubber energiser) may also suit square cut double acting
housings. Please see glide ring flier for style and part number information .
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
GLIDE RINGS
GLIDE RINGS
ROD APPLICATION PISTON APPLICATION
PISTON APPLICATION
Urethane - (U)
PolyEster - (E)
Bearing Load
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
Friction
Bearing, Anti-dieseling
BAD
ring
M b L L
Bearing Load
L
H
Friction
L
Viton - (V)
Urethane - (U)
Virgin PTFE - (T)
Fabric NBR - (R)
b
Brass - (M)
AB SEALS
PolyEster - (E)
b b
I/M
I/M
I/M
I/M
Description
Bearing, split
Bearing, split
Bearing strip
Bearing strip
Variant design
Primary design
Style
BWR/G
BWS/C,
BWR/P
BWS/B
BWS/E
AB SEALS
PART NUMBER DEFINITION GUIDE
WEAR RINGS
WEAR RINGS & BEARINGS
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
WEAR STRIP
CUT TO LENGTH WEAR STRIP
BWS/E BWS/B
Woven Polyester Filled PTFE (Refer description)
IMP/MET IMP/MET
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PART NUMBER DEFINITION GUIDE
EZU EZX
(PTFE/Steel) (Nylon/Brass)
IMP/MET IMP/MET
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
AB SEALS
PROFILE GUIDE
MISC. SEALS
Urethane - (U)
PolyEster - (E)
(I/M)
Nitrile - (N)
Brass - (M)
Viton - (V)
Bonded washer.
BW ,multiple metal options I/M b b
available
ROTARY SEALS
ROTARY SHAFT SEALS
3 Welch street, Underwood QLD 4119 1/1880 Hume Hwy, Campbellfield VIC 3061
Ph - 07 3341 1200 E-Mail - sales@abseals.com.au Ph - 03 9357 0451 E-mail - vicsales@abseals.com.au
MACHINED MACHINED BEARING
MACHINED WIPERS MACHINED GLAND SEALS MACHINED PISTON SEALS ROTARY SEALS RINGS
EW101 EW102 EG101 EG102 EG103 EB101 EB102 EB103
EP101 EP102 EP102R ER101 ER102
EB104 EB105 EB106
EW103 EW104 EG104 EG104R EG105 EP103 EP104 EP104R ER103 ER104
ER105 ER106 EB107 EB108
EW105 EW106 EG205 EG106 EG107 EP105 EP205 EP106
MACHINED GASKETS
& O RINGS
EP107 EP108 EP109 ER110 ER111
EW107 EW108 EG108 EG109 EG116
EO101 EO102 EO103
EP110 EP112
EP111 EP116 EP216
EW109 EW111 EG216 EG117 EG117R ER112 ER115
EO104 EO105 EO106
EP117 EP118 EP119
ER116 ER117
EW112 EW213 EG119 EG120 EG121
EO108 EO108-A
EO109A
EP120 EP122 EP222
ER118 ER119
EP124
EW113 EW114 EG124 EG125 EG129
EP123 EP125 EO109B EO109C EO110
ER201 ER202 MACHINED ANTI-
EXTRUSION RINGS
EW115 EW116 EG130 EG131 EG138
EP126 EP127 EP138
ER203 ER204
EA108 EA109 EA110
EW117 EW118 EG238 EG139 EG141 EP238 EP140 EP141
ER205 ER206
EA111 EA112
EP142 EP144 EP145
EG142 EG118
ER207 EA114
EP163 EP109N EP123D EA113