Professional Documents
Culture Documents
DWIJAYA’S RANGE
of Pump, STP, WTP & WW TP
included:
1 800.000.0000
1. PUMP
TSURUMI SUBMERSIBLE PUMP
SEWAGE PUMP
DRAINAGE PUMP
EBARA PUMP
SUBMERSIBLE PUMP
CENTRIFUGAL END SUCTION
BOOSTER PUMP
2. SEWAGE TREATMENT PLANT
PACKAGE STP BIOBALL FIBEGLASS
EXTENDED AERATION
SAFF BIOMEDIA
SEPTIC TANK
GREASE TRAP
3. WATER TREATMENT PLANT
SAND FILTER
CARBON FILTER
IRON REMOVAL
REVERSE OSMOSIS
ULTRA
Page FILTRATION
2
CLARIFIER
WATER SOFTENER
4. INDUSTRIAL - WASTE WATER TREATMENT PLANT
14
2
STP & WWTP
Typical Waste Treatment System
Primary Secondary
Raw Biological Biological Tertiary Treated
Screening oil/water oil/water Equalization
influent treatment clarification treatment effluent
separation separation
Reuse/
Suspended growth recovery
Process In-
In-process sludge recycle
unit treatments Multiple streams
wastewater
Solids
Biomass to disposal
handling
Blower
Control Panel
Chemical Tank
Inlet From Kitchen Influent Chamber
A
Grease Trap Equalizing Tank Aeration Tank Clarifier Tank 1 Chlorination Tank Clarifier Tank 2
B C E F G H
Outlet
CF SF
15
3
Bioclean Package STP & Septic Tank
14
4
WWTP Aerobic & Anaerobic System
15
5
STP SAFF BIODEDIA
AIR DIFFUSER
BLOWER
OUTLET PIPE
BIODEK MEDIA
BIOdek fixed film biological treatment media is a
self supporting crossflow synthetic media. It is
fabricated from completely corrugated, rigid PVC
sheet and forms a cross-corrugated pattern with
each adjacent sheet. Unlike conventional
modular sheet media, no flat sheets are used in
the fabrication of the module. Each sheet is
corrugated at a 60⁰ angle and assembled in a
cross-currogated pattern with adjacented sheets.
14
6
Water Treatment
SAND FILTER
A fine mesh sand with a coarse mesh sand
support bed is recommended for the highest
quality filtering of suspended solid and
turbidity. CARBON FILTER
Activated Carbon Filters are
used to reduce chlorine,
organics, color, tannin, and
objectionable tastes and odors
from water.
REVERSE OSMOSIS
Tap Water (TW) RO
Brackish Water (BW) RO
Sea Water (SW) RO
TUBE SETTLER
TUBEdek settling media helps reduce
the amount of suspended solids in
carrier fluids thus improving effluent
quality significantly, which in turn
improves the efficiency of existing
plants.
14
8
DAF System
DAF Process
Dissolved Air Flotation is a liquid/solid or
liquid/liquid separation process. It can
be used to remove fine suspended solids
with density similar to water, colloid and
oil & grease etc.
DAF Application
Fine suspended matter, alga and micro
flocs separation (such as landscape
water treatment, river clarifying and
enhanced treatment).
Suspended solids and oil & grease
separation and recovery (such as
petroleum wastewater).
High concentration organic wastewater
treatment (such as chemical pharmacy
wastewater).
Outlet wastewater from biological tanks (replacing
secondary clarifier), out let wastewater from the
Fenton process and active sludge thickening.
Paper & pulp, printing & dyeing, leather, fermentation,
food wastewater treatment.
Aquaculture, slaughter wastewater treatment.
Spray, electroplating wastewater treatment and heavy
metals recovery.
15
9
GRP (SMC) WATER TANK
10
14
Blower
Features:
1. Capacity, Pressure and Vacuum range.
Bore: 50mm-500mm (2”-20”)
Capacity: 0.4-490M/min(14-17300CFM)
Pressure:
One-Stage TS type 6000mm Aq.(0.6 kg/cm).
R type 10000mm Aq.(1 kg/cm)
TWO-Stage TR-type 20000mm Aq.(2 kg/cm)
Vacuum range:
One-Stage 5000mm Aq.(-400mm Hg.)
Two-Stage 8000mm Aq.(-600mm Hg.)
2. Delievers completely oil-free air.
3. Low oscillation and low noise by complete
balancing.
4. Small change in capacity against change in
pressure.
5. High efficiency due to special profile.
6. Simple structure, free from trouble.
7. Highest quality pilot & Accurate gear applied.
Long life and low noise assured.
8. Standardized product with strict quality
control.
TS OUTLINE DIMENSIONS
15
11
Pump
Cable Entry
Every cabtyre cable has an anti-wicking block at
the cable entry section on the pump. This mech-
anism is such that a part of each conductor is
SUBMERSIBLE PUMPS
stripped back and the part is sealed by molded
rubber or epoxy potting which has flowed in Motor Protectors
between each strand of the conductor. This Use of a Circle Thermal Protector (CTP)
unique feature prevents wicking under the strands in small pumps is advantageous in
of the conductor itself. applications where a control panel is
not likely provided. Integrated in
the motor housing, the CTP directly
cuts the motor circuit if excessive heat
builds up or an overcurrent caused by
an electrical or mechanical failure Occurs.
AUTOMATIC SCREEN
SUBMERSIBLE
AERATOR
HORIZONTAL SPLIT
CENTRIFUGAL PUMP
CASING PUMP
15
13
EQUIPMENT
Activated Carbon
LMI,
USA Dosing Pump
MAC 3-ITALY
FLOAT SWITCH
Well Mate,
Structural Pressure Tank
USA FRP
Filter Tank
14
PROJECT REFERENCES
STP
WTP
WWTP
15