You are on page 1of 1

DR.

FIXIT PIDIPART 55 E
Water dilutable Shuttering / Mould Release Agent

CONCRETE ADMIXTURES
Dr. Fixit Pidipart 55 E is a concentrated mould or shuttering release agent. This water-diluted liquid is suitable for use with
all types of moulds and formwork of concrete including wood, steel, etc. For easy release / stripping of hardened concrete
etc.

AREA OF APPLICATION:
On all types of mould or formwork like wood & steel, etc

FEATURES & BENEFITS:


Water dilutable - economical to use
Suitable for all types of concrete moulds / formworks
Non - staining
Reduces imperfections on concrete surfaces
Extends life of the wood in shuttering
All tools can be cleaned with water

METHOD OF APPLICATION:
Mix concentrated Dr. Fixit Pidipart 55 E with recommended quantity of water in a clean container (1 ltr DR. Dr. Fixit
Pidipart 55 E: 5 ltr of water) and thoroughly stir. Apply on the formwork with a brush, roller or a spraying. Allow the
formwork to dry and cast concrete.
Used or rusted metal equipments must be cleaned thoroughly by wire brushing or treating with emery paper. Apply only
1 coat except on untreated timber where 2 coats may be required in the concrete finish. Excess application of emulsion
may cause "bugholes" or imperfections in the concrete finish.

PRECAUTIONS & LIMITATIONS :


• Dr. Fixit Pidipart 55 E should not be added in dry mixes under any circumstances
• Coverage depends on type and condition of shuttering plates
• Dr. Fixit Pidipart 55 E is non-toxic and inflammable. When in contact with skin, wash with clean water.

PIDIPART 55 E
TECHNICAL INFORMATION:
Appearance / colour - Amber colour liquid
Density - 0.85 ± 0.5 gms/cc
Dilution - 1 ltr Dr. Fixit Pidipart 55 E to be mixed with 5 ltrs of water
Coverage with water diluted solution
For untreated wooden surface - 75 to 100 m2 / 6 ltrs
For pre-oiled wooden surface - 90 to 150 m2 / 6 ltrs
For steel surface - 125 to 180 m2 / 6 ltrs
CCPIDIPART55EENG94A

Application tools - Brush, roller, spray etc.

PACKING: 10 litres

Disclaimer:
The product information & application details given by the company & its agents has been
Pidilite Industries Ltd. : Construction Chemicals Division. provided in good faith & meant to serve only as a general guideline during usage. Users are
advised to carry out tests & take trials to ensure on the suitability of products meeting their
Ramkrishna Mandir Road P.O.Box No.17411, Andheri (East) MUMBAI-400 059. requirement prior to full scale usage of our products. Since the correct identification of the
problems, quality of other materials used and on-site workmanship are factors beyond our
Phone : 2834 7550 Extn. 7617, 7546, 7537 • Fax : (022) 2836 7459. control, there are no expressed or implied guarantee / warranty as to the results obtained. The
• E-mail : drfixit@pidilite.com • Website : www.doctor-fixit.com Company does not assume any liability or any consequential damage for unsatisfactory results,
arising from the use of our products.

You might also like