Professional Documents
Culture Documents
03
Replaces: 05.02
Nominal size 10
Series 4X
K 4786/11
Maximum reduced pressure 210 bar
Maximum flow 80 L/min Type DR 10 DP2-4X/...YM...
DR 10 DP –4X Y *
Direct operated pressure reducing valve, NS 10
Adjustment element Further details in clear text
Rotary knob =1 No code = NBR seals
Set screw with hexagon and protective cap =2 V= FKM seals
Lockable rotary knob with scale = 3 1)
Rotary knob with scale =7 (other seals on request)
Series 40 to 49 = 4X Attention!
(40 to 49: unchanged installation and connection dimensions) The compatibility of the seals and pressure
fluid has to be taken into account!
Max. secondary pressure 25 bar = 25
Max. secondary pressure 75 bar = 75 No code = With check valve
Max. secondary pressure 150 bar = 150 M= Without check valve
Max. secondary pressure 210 bar = 210 Y= Internal pilot oil supply, external pilot oil drain
1) H-key with material no. R900008158 is included within the scope of supply!
© 2003
by Bosch Rexroth AG, Industrial Hydraulics, D-97813 Lohr am Main
All rights reserved. No part of this document may be reproduced or stored, processed, duplicated or circulated using
electronic systems, in any form or by any means, without the prior written authorisation of Bosch Rexroth AG.
In the event of contravention of the above provisions, the contravening party is obliged to pay compensation.
DR 10 DP 1/4 RE 26 580/02.03
Preferred types (readily available)
Type Material number Type Material number
DR 10 DP1-4X/75YM R900501038 DR 10 DP3-4X/75YM R900500258
DR 10 DP1-4X/150Y R900507303
DR 10 DP1-4X/210Y R900503336
DR 10 DP2-4X/75Y R900500471
DR 10 DP2-4X/75YM R900500547
DR 10 DP2-4X/150Y R900500051
DR 10 DP2-4X/150YM R900500226
DR 10 DP2-4X/210Y R900594125 Preferred types and standard components are
DR 10 DP2-4X/210YM R900501385 highlighted in the EPS (standard price list).
Symbols
Version "YM"
A
7 5
M
8
B Y
1 3 6 2 Y
A B
Version "Y" Y
A
M
A B
B Y
RE 26 580/02.03 2/4 DR 10 DP
Technical data (for applications outside these parameters, please consult us!)
General
Installation Optional
Ambient temperature range °C – 30 to + 50 for NBR seals
°C – 20 to + 50 for FKM seals
Weight kg 3
Hydraulic
Nominal pressure bar 210
Maximum operating pressure at port B bar 315
Maximum secondary pressure at port A bar 25; 75; 150; 210
Maximum back pressure at port Y bar 160
Maximum flow L/min 80
Pressure fluid Mineral oil (HL, HLP) to DIN 51 524 2);
Fast bio-degradable pressure fluids to
VDMA 24 568 (also see RE 90 221); HETG (rape seed oil) 2);
HEPG (polyglycols) 3); HEES (synthetic ester) 3);
Other pressure fluids on request
Pressure fluid temperature range °C – 30 to + 80 for NBR seals
°C – 20 to + 80 for FKM seals
Viscosity range mm2/s 10 to 800
Cleanliness class to ISO code Maximum permissible degree of contamination of the pressure
fluid is to ISO 4406 (C) class 20/18/15 3)
1) Suitable for NBR and FKM seals 3) The cleanliness class stated for the components must be adhered too in hydraulic systems. Effective
2) Only suitable for FKM seals filtration prevents faults from occurring and at the same time increases the component service life.
For the selection of filters see catalogue sheets RE 50 070, RE 50 076 and RE 50 081.
200 20
150 15
1
100 10
2
50 5
3 4
0 0
40 20 0 20 40 60 80 0 10 20 30 40 50 60 70 80
Flow in L/min → Flow in L/min →
A to Y B to A
1 ∆p–qV–characteristic curve A to Y
Note: 2 ∆p–qV–characteristic curve B to A
The curve characteristics remain, with a low set pressure, 3 Only via a check valve
the same in relation to the pressure rating 4 Via check valve and spool
The characteristic curves for the pressure relief function are valid for an outlet pressure = zero
over the entire flow range!
DR 10 DP 3/4 RE 26 580/02.03
Unit dimensions (dimensions in mm)
1 11
197,5
104 93,5
64 14,5
2
74
47
30
Ø6
2
87 2 13 7 10
12
Y
1 Name plate
66,7
Ø 39
58,8
3 Adjustment element "2" A B
33,4
RE 45 062 and
3
2
screws
M10 x 60 DIN 912 - 10.9, Required surface finish of
tightening torque MA = 75 Nm, mating piece
must be ordered separately. 4 5
Bosch Rexroth AG Bosch Rexroth Limited The data specified above only serves to describe
Industrial Hydraulics the product. No statements concerning a certain
D-97813 Lohr am Main Cromwell Road, St Neots, condition or suitability for a certain application
Zum Eisengießer 1 • D-97816 Lohr am Main Cambs, PE19 2ES can be derived from our information.
Telefon 0 93 52 / 18-0 Tel: 0 14 80/22 32 56 The details stated do not release you from the
Telefax 0 93 52 / 18-23 58 • Telex 6 89 418-0 Fax: 0 14 80/21 90 52 responsibility for carrying out your own
eMail documentation@boschrexroth.de E-mail: info@boschrexroth.co.uk assessment and verification. It must be
Internet www.boschrexroth.de remembered that our products are subject to a
natural process of wear and ageing.
RE 26 580/02.03 4/4 DR 10 DP