Professional Documents
Culture Documents
Kryotechnische Systeme
Hans-Böckler-Str. 1
D-47877 Willich
Telefon: +49 – 2154 - 94 07-20
Telefax: +49 – 2154 - 94 07-28
Email: bernd.mingers@krytem.de
Internet: www.krytem.com
PA180010
Dear Sir,
Attached please find our proposal for a high pressure oxygen pump unit.
Bernd Mingers
Specification
KRYTEM
-2-
1
supplied unfilled, standard gear oil included; for oxygen-compatible lubricant refer to Options
2
spiral style PN450 for N2, O2, Ar / separate cylinder type PN300, electric heated 300 W for CO2
3
no standard for CO2 version
4
actual flow rate may deviate due to particular suction conditions
KRYTEM
-3-
1.2.3 Electrical cabinet IP55 for wall mounting under weather shelter
control design based on individual electronic controllers for easy han-
dling
cabinet material steel, lacquered
power supply 400 V - 50 Hz
degree of protection IP55
dimensions (W x H x D) ca. 800 mm x 800 mm x 300 mm
functions / circuits:
main switch "POWER" & emergency switch, phase indicators
service switch "PUMP ON / OFF"
flow supervision / dry-run protection
supervision of seal temperature
pressure control (input 4-20 mA form external pressure transmitter)
for automatic pump stop; digital pressure display
motor overload protection, indicator "MOTOR OVERLOAD"
power supply for pulsation damper
free contacts for external emergency switch and external START /
STOP control € 4.460,00
300
VSAH 36.45
225
stroke frequency [min-1]
150
75
0
0 5 10 15
nominal capacity [l/min]
Due to safety relevant features that are directly linked to the control design, Krytem pumps can only be re-
garded as complete machines in the sense of the EC Machinery Directive if they are delivered together
with an associated Krytem control unit. Such pump units are CE-marked by Krytem and supplied with a
corresponding Declaration Of Conformity.
Krytem pumps purchased and delivered without Krytem control must be regarded as machinery compo-
nents that have to be supplied with a Declaration Of Incorporation according to Annex II B of the Machinery
Directive. In this case the customer must take care to grant and attach the CE-mark after complete installa-
tion with a safe control on his own responsibility.