Professional Documents
Culture Documents
CABINET
2018 Design Manual
+86-20-36730513
sales@oppein.com
Oppein Home OPPEIN Website OPPEIN Wechat 360° Showroom The Largest Cabinetry Manufacturer in Asia
Wood Veneer Series 001
Glass & Acrylic Inserts Bartop Legs & Aluminum Racks 095
045
DECLARATION:
Due to printing variations and limitations, textures, grains, finishes and colors shown in this manual are for
representation only. We can not guarantee they perfectly match the actual samples or products.
Carcase Configuration
Door Configuration
Type Premium Standard A Standard B
16mm thick green-core 16mm thick white-core particle
Carcase Panel 15mm thick, 7-layer plywood
particle board board from Thailand
Carcase
E1 E1 E1
Eco-Friendliness
PWGF0001, PWGF0002,
Carcase Available PWGF0003, PWGF0004, PWGA0006, PWGA0007, PWGA0001,PWGA0004,
Finishes PWGF0006, PWGF0007 PWGA0008 PWGA0009,PWGA0010 Melemine Coated Door HPL Coated Door
18mm thick particle board as core 18mm thick particle board as core
Carcase Edge front edge coated with 1.5mm thick PVC; other edges coated with 0.6mm thick PVC. Edges sealed with 2mm thick REHAU PVC, Edges sealed with 2mm thick REHAU PVC
High qualilty German SCHATTDECOR and The decorative sheet thickness is 0.6~0.8mm
Carcase Back Panel 3mm thick MDF, both faces melamine coated. Spain LAMIGRAF impregnated decor paper
Movable Shelf 15mm thick plywood, 16mm thick green-core particle 16mm thick white-core particle
both faces HPL coated board, both faces melamine coated board, both faces melamine coated
Movable Shelf Edge Front edge sealed with 1.5mm thick PVC
Glass Shelf Edge Front edge sealed with aluminum edge band PWFL0003
Adjustable Leg (Plinth) PP leg, max. 100KG load capacity per foot
Kickboard Material Mateiral and color are optional, including aluminum, plastic, HPL, PVC, Venner
& Color
Vent Mesh of Available
Stove Cabinet
Bottom Panel Coat for 0.25mm thick aluminum-foil coated, to keep bottom panel from water and moisture
Sink Cabinet
Aluminum Transverse
for all base cabinets, in order to reinforce (excpet diagonal cabinets or special cabinets)
(cross bar)
PP Foil Coated Door Acrylic(PWMA) Coated Door
Idle Hole Insert Available 21/25mm thick MDF as core 18mm thick particle board as core
Both faces coated with PP Front face coated with colored 1mm thick painted acrylic
Dustproof Corner Available Fine wood grain, affordable and often used as the Back face laminated with ABS decor paper
Insert
alternative of solid wood. Edges sealed with same-color acrylic
Anti-sagging Optional for 900mm wide wall cabinets.
Door Configuration Structure
Rail
Stile
Stile
Core(insert)
Acrylic(PWMA) Coated Door UV Lacquered Door
18 thick plywood as core 18mm thick MDF as base
Front face coated with 1.8mm-thick painted arylic Front face laminated with melamine, then UV lacquered
Back face laminated with ABS decor paper Back face coated with white melamine
Edges sealed with same-color acrylic Edges sealed with PVC
Rail
Back transverse
Back panel
Shelf
Door
Bottom panel
Cooking
Hob
Worktop Worktop
Washing
Refrigerator Sink
Worktop
Preserving
One wall
U-shaped L-shaped
It's the layout of the kitchen—and not its color or its style—that determines how easy it is to cook, eat and socialize in the
kitchen. At the most basic level, the layout addresses the placement of the appliances, the sink, the cabinets, the counters,
the windows and doors, and furniture such as a kitchen table and chairs. If you're building a new home or adding on, you
have the luxury of choosing the layout that works best for you and your family. If you're remodeling, the structure of the
existing home will limit the options. The most common kitchen layouts include the one-wall kitchen, the galley kitchen, the
U-shaped kitchen, the G-shaped kitchen, and the L-shaped kitchen—some of which can also incorporate an island.
Transitional
Transitional style blends elements of both traditional and contemporary
design to create a welcoming space that invites all to linger. It is natural
and uncomplicated with relaxed lines and a live-in feel.
Its lines are softer and details are not as complicated as traditional ones.
Transitional style adapts more easily to its surroundings, no matter your
interior style is contemporary or traditional style.
Galley G-shaped
Transitional style can be attained by combining finishes and details of
both traditional and transitional style, or use of new material.
Materials and colors make it happen Choose the right door style
More than 160 popular door styles can be found at OPPEIN. OPPEIN has the largest collection of
door styles and colors which others can not rival. These provide a multitude of versatilities to
achieve different kitchen styles, such as modern, contemporary, transitional, traditional and country.
At OPPEIN, you do not need to limit your imagination, just activate it.
DOOR ILLUSTRATION
OPTIONAL FRAMED
PICTURE DOOR THICKNESS/FINISH
STYLE DOOR/DRAWER SIZE LIMITS/TECHNICS
Size Limits Of Door And Drawer Fronts GLASS DOOR
W
-For door panel: -Door thickness: 19mm
Door Type YMN001 W≤600mm and H≤1450mm -Optional finishes: YMB001
Door Panel Drawer Front Lift Up Door/Flap Door Glass Door False Door (W-09) H -For drawer front/flap door: PWMA4001,PWMM4003, YMB011
Finish/Coat
W≤1200 and H≤400mm PWMM4004
1) W≤600mm, W≤600mm,
Wood veneer H≤1450mm. H≤1450mm.
W≤1200mm, W≤1200mm, W≤650mm,
/lacquer (W≤640mm if door (W≤640mm if door
H≤400mm H≤500mm H≤2250mm
style is YMM034.) style is YMM034.) W -For door panel:
100≤W≤600mm and
YMN002 120mm≤H≤1450mm -Door thickness: 19mm
H
(YMM35) -For drawer/flap door: NONE
-Optional finish: PWMA4005
100≤W≤1200mm,120mm≤H≤400mm
-Bar handle:PWMK0020
W≤600mm,
H≤1450mm.
Toughened (H≤640mm if door
W≤1200mm, W≤1200mm, Wood Veneer Grade D Base:18mm thick MDF; front face or both faces coated with PU painted veneer
Glass Door H≤600mm H≤600mm
style is YMQ003/
YMM034.)
W≤600mm,
H≤1600mm. PWMM4005 (WBMM318) PWMM2038 (WBMM325)
Aluminum Framed W≤1200mm, W≤1200mm, (high gloss)
(H≤2200mm if door
Glass Door H≤600mm H≤600mm
style is YML002A/
YML002B.) High Gloss Wood Veneer Base:18mm thick MDF; both faces coated with high-gloss PU painted veneer
Tips:
Doors and drawers exceeding size limits can not be processed, because they are inclined to warp.
Decorative Accessories
Page 001
LACQUER SERIES LACQUER SERIES
W
For door panel:
-For door panel: -When 265mm≤W≤600mm,
YMK004 W≤600mm and H≤1450mm -Door thickness:22mm YMB001 and 220mm≤H≤1450mm,
(J-26) H -For drawer front/flap door -Front face or both faces YMB005 stile and rail width is 53mm.
W≤1200 and H≤400mm lacquered YMB011 -When 225mm≤W≤265mm,rail width is 53mm
and stile width is 33mm.
-When 120mm≤W≤225mm and
220mm≤H≤1450mm,or 120mm≤W≤600mm
and 120mm≤H≤220mm, door is flat,
grooved and edges routed.
-When W<120mm or H<120mm,
A door is flat, edges routed. -Door thickness:22mm
YMB001
-Front face or both faces
YMB005
YMK009B matt lacquered
W For drawer front/flap door:
(YMK36) -No paint lines
-When 265mm≤W≤1200mm,
YMK005A -Door thickness:19mm and 220mm≤H≤400mm,
(J-35) Straight edges -Front face or both faces NONE stile and rail width is 53mm.
(R300) -When 265mm≤W≤1200mm,
H lacquered rail width is 33mm and stile width is 53mm.
-When 120mm≤W≤265mm and
B 180mm≤H≤400mm,or 120mm≤W≤1200mm
and 80mm≤H≤180mm,door is flat,
grooved and edges routed.
-When W<120mm or H<80mm,
door is flat, edges routed.
(YMK21) -For drawer front/flap door -Front face or both faces NONE stile and rail width is 61mm.
-When 290mm≤W≤120mm,
W≤1200 and H≤400mm lacquered and 230mm≤H<290mm,stile width is 61mm
-Bar handle:PWWK007 and rail width is 31mm.
W -When 210mm≤W<290mm
and 230mm≤H≤400mm,
B or 210mm≤W≤1200mm
and 150mm≤H<230mm,
stile width is 61mm and rail width is 31mm,
and core is flat.
-When W<210mm or H<150mm,
door is flat, edges routed.
R2
R2
Benley Auto Lacquer Base:18/21/25mm MDF Front face or both faces lacquered Matt Lacquer Base:18/21/25mm MDF Front face or both faces lacquered
Metallic-Tones Auto Lacquer Base:18/21/25mm MDF Front face or both faces lacquered
Pearl Pigment Auto Lacquer Base:18/21/25mm MDF Front face or both faces lacquered
PWMK2055 PWMK2056
High Gloss Lacquer Base:18/21/25mm MDF Front face or both faces lacquered
PWMK3011(WBMK418)
Lacquer Grade G Base:18mm MDF Front face lacquered Note: Only suitable for door style YMK001,YMK002
PWMK1016(WBMK132) PWMK1017(WBMK133)
PWMK2074
NAME CODE PICTURE/DIAGRAM BASE/FINISH/TECHNICS SIZE NAME CODE PICTURE/DIAGRAM BASE/FINISH/TECHNICS SIZE
50
YSL034 Decorative Thickness=50mm
-Finish: PWMK2003 Max. L=2200mm/PC Panel (YSB24) H -Finish: lacquer
(YSL34)
-Golden painting available
38
(YSL40) -Match range hood covers, Max. L=2300mm/PC (Rounded)
wall cabinets and high cabinets
YSG013 -Base: MDF -Finish: lacquer
-Base: alder (YSG13) 38
R2
Thickness=38mm
YSL40A -Edges R2 rounded L=2300/PC
Crown (R897) -Finish: lacquer (Square)
Moulding -Match range hood cover YSH052 only Decorative
shelf -Base: MDF
-Base: MDF -Finish: lacquer YSG003A(AC-02) 80 Thickness=80mm
YSL076 -Match wall cabinets, rang hood covers Max. L=2300mm/PC -Finish: lacquer
and high cabinets
YSG016 -Base: MDF D=18mm,W=450mm,
YSL005 -Base: 38mm thick MDF (YSG16) H=283mm
(AL-15) Max. L=2300mm/PC -Finish: lacquer
H
-Finish: lacquer
(Rounded edge)
YSD004
(ZDB-L) D -Base: MDF -Finish:lacquer Thickness=38mm
YSL006 -Base: 38mm thick MDF
Max. L=2300mm/PC -Edges R8 rounded L=2300/PC
38
(AL-16) -Finish: lacquer (Rounded)
(YSB48) Thickness=47mm
-For wall cabinets/middle/high cabinets
-Base: MDF -Finish: lacquer PWMK2003,
Lacquered Bar for Door Style YMK020 (handleless design)
YSB033
with golden portrays; no golden paint if
(YSB50)
applying other matt finish.
-Base: MDF Profile Code Profile Code
YSB045 -Finish: lacquer PWMK1011, with golden W=80mm
(YSB57A) portrays; for base cabinets. K60 K80
-Base: MDF
YSB046 -Finish: lacquer PWMK1011,with golden Door thickness Door thickness
(YSB57B) W=80mm
paint; for wall cabinets. =18/19/20mm =18/19/20mm
Decorative
YSB047 -Base: MDF -Finish:lacquer W=900~924mm
(YSB58) -For islands H≤880mm
Panel
30
60
YSB052 -Base: MDF/alder -This bar matches door style -This bar matches door style
W=86mm
(YSB62) -Finish: lacquer K60 YMK020(door panel has 45° YMK020(door panel
wooden bar cutting edges) has 45° cutting edges)
30
80
-Bar heigh:60mm -Bar heigh:80mm
YSB053 -Base: MDF/alder
(YSB63) W=75mm -Bar position: K80 -Bar position:
-Finish: lacquer
in the cut-out of cabinet side wooden bar in the cut-out of cabinet side
-Bar base and finish: -Bar base and finish:
lacquered MDF lacquered MDF
YSB054 -Base: MDF/alder
(YSB64) -Finish: lacquer W=150mm
YSB058L
(YSB67L) -Base: MDF
YSB058R -Applied in model PLCC16117 only
(YSB67R)
-Base:MDF
YSB161 -Golden paint line available W=50mm
when applying finish PWMK2006 only.
R3
00
R200 0 cabinet cabinet
R3
00
-Base:18mm thick plywood
YMB006
YMR002 -Bar handle:PWWK0001/PWWK003 -Front face methacrylate
(YMR02) YMB008
-Edges same color as door front layer coated
YMB011
-Door thickness:20mm
500
Door
Corner R362.5 cabinet/
R300 H≤1390 H≤800 -Base:18mm thick plywood
D
cabinet YMB006
R362. 5
R3
20 drawer YMR003 Edges same color as door front
-Both faces methacrylate
YMB008
cabinet (YMR03) layer coated
YMB011
-Door thickness:20mm
100
500
-Base:18mm thick particle
double- YMR004 -Bar handle:PWWK0001/PWWK003
board YMB006
Drawer door (YMR04) -Edges same color as door front
-Both faces methacrylate YMB008
R650 R650 H≤800 layer coated YMB011
cabinet
R650
corner
D
-Door thickness:20mm
70 cabinet
R6
50
φ814 φ1050
Methacrylate Layer(PMMA+ABS), Grade D Base: 18mm thick plywood. Double faces coated with methacrylate layer
Door Door
cabinet/ H≤800 cabinet/
φ814 φ1050 drawer H≤800
drawer
cabinet cabinet
R1040 H≤800
R1305.5
D
drawer drawer
R1040
cabinet cabinet
80
80
cabinet
51.3
380
200
Door H≤1390
550
R150 cabinet
R1
50
PWMR0009(WBMR206) PWMR0010(WBMR207)
Base: particle board. Front face coated with methacrylate layer, ILLUSTRATION
Methacrylate Layer(PMMA+ABS), Grade G back face coated with white ABS deco paper DOOR
PICTURE
OPTIONAL FRAMED
STYLE DOOR THICKNESS/FINISH
DOOR/DRAWER SIZE LIMITS/TECHNICS GLASS DOOR
W
Decorative Accessories
-Aluminum bar handle: PWWK0001 -Base: MDF YMB006
YMC002
-Other edges sealed with aluminum -Door thickness: 22mm YMB008
NAME CODE PICTURE BASE/FINISH/TECHNICS NOTES (A-SL)
H edge band PWFL0001 -Front face lacquered YMB011
YSL005 -Base: MDF
(AL-15) Thickness=34mm
H -Coat: acrylic
Max.L=2300mm/PC
(Rounded edge) -R15 corner radius
Crown W
Moulding
-Base: MDF -Base: MDF YMB006
YSL006 Thickness:34mm YMC003
(AL-16)
-Coat: acrylic 2mm thick PVC edging -Door thickness:19mm YMB008
Max.L=2300mm/PC (YMC03) H
-R2 corner radius -Front face lacquered YMB011
(Rounded) YMB011
Decorative -R15 corner radius
shelf
YSG013 -Base: MDF
(YSG13) 38 Thickness=34mm
R2 -Coat: acrylic Max. L=2300mm/PC
(Square) -R2 corner radius W
YSD004 D -Base: MDF -Base: MDF YMB006
(ZDB-L) Thickness=34mm
-Coat: acrylic YMC005 ABS edging -Door thickness: 19mm YMB008
38
UV Lacquer Grade D Base: 18mm thick MDF Coat: UV lacquer on front face;white melamine on back face
UV Lacquer Grade G Base: 18mm thick MDF Coat: UV lacquer on front face;white melamine on back face
H
and 230mm≤W≤1200mm, -When 170mm≤H<210mm
H corners are rounded.
-When 210mm≤H≤600mm
and 230mm≤W≤1200mm,
and 248mm≤W≤1200mm, ② drawer front and flap door profile
corners are square. is same as the left diagram ②.
-When 30mm≤H<145mm -When 29mm≤H<170mm,
and 98mm≤W≤2400mm, door is flat, edges routed.
door is flat, edges routed.
Notes: not all door styles can be high-gloss PVC pressed. Only those door styles marked with * can match both high-gloss and non high-gloss PVC. Notes: not all door styles can be high-gloss PVC pressed. Only those door styles marked with * can match both high-gloss and non high-gloss PVC.
For door:
For door: -When 198mm≤W≤650mm and
-When 297mm≤W≤650mm 158mm≤H≤1450mm,door profile is
and 297mm≤H≤1450mm,door profile same as the left diagram.
is same as the left diagram ①; -When 20mm≤W<198mmm
and D1=D2=D3=50mm. and 97mm≤H≤2400mm, door is YMB001
W -When 256mm≤W<297mm flat, corner rounded. YMB002
and 256mm≤H≤1450mm, -Door thickness:23mm
YMB003
door profile is same as the left diagram ②; YMG018 -Front face coated
YMB005
and D1=50mm, D2=D3=35mm, (YMG45) For drawer front/flap door: with PVC foil
YMB012
H -When 20mm≤W<158mm, -Door thickness:22mm YMB001 -When 158mm≤H≤600mm and YMB031
door is flat, edges routed. -Available PVC foil: YMB002 198mm≤W≤1200mm,door profile
PWMG0010 YMB003
is same as the left diagram.
PWMG0012 YMB005
For drawer front/flap door: PWMG0014 YMB011
-When 20mm≤H<158mmm
① and 98mm≤W≤2400mm,
YMG009B -When 297≤H≤600mm and PWMG0015 YMB012
(P-29B) 297mm≤W≤1200mm, drawer front and -Front face coated with PVC foil YMB031 drawer and flap door is flat,
H flap door profile is same as the left corner rounded.
diagram ①.
W
-When 256mm≤H<297mm For door:
② and 256mm≤W≤1200mm, -When 98mm≤W≤650mm
drawer front and flap door profile is same
H as the left diagram ②. and 98mm≤H≤1450mm, door profile
W -When 158mm≤H<256mm is same as the left diagram.
and 188mm≤W≤1200mm, -When 20mm≤W<98mmm
③
drawer front and flap door pattern is same and 97mm≤H≤2400mm, -Door thickness:22mm YMB001
as the left diagram ③. door is flat, corner rounded. -Front face coated YMB003
-When 30mm≤H<158mm YMG019 with PVC foil YMB005
and 98mm≤W≤2400mm, (YMG46)
For drawer front/flap door: -High gloss PVC does YMB011
drawer front and flap door is flat,
edges routed. When 98mm≤H≤600mm, not match this door style. YMB012
98mm≤W≤1200mm, door pattern is
shown in the left diagram.
For door: When 20mm≤H<98mmm
-When 256mm≤W≤650mm and and 98mm≤W≤2400mm,
256mm≤H≤1450mm,door profile drawer front and flap door is flat,
is same as the left diagram ①,
W corner rounded.
and D1=D2=55mm,D3=35mm.
-When 200mm≤W<256mm
and 256mm≤H≤1450mm, For door:
door profile is same as the left diagram ②; -When 248mm≤W≤650mm and
and D1=D2=55,D3=35. 248mm≤H≤1450mm,door profile
H -When 158mm≤W<200mm is same as the left diagram ①;
and 256mm≤H≤1450mm, and D1=D2=D3=50mm.
door profile is same as the left diagram ②; -When 230mm≤W<248mm
and D1=55,D2=45,D3=35. and 248mm≤H≤1450mm, door profile
-When 20mm≤W<158mm, -Door thickness:22mm YMB001 is same as the left diagram ②; and
① door is flat, edges routed. -Available PVC foil: YMB002 D1=D2=D3=50mm.
PWMG0010 YMB003 -When 210mm≤W<230mm
YMG010 PWMG0012 YMB005 and 248mm≤H≤1450mm,
(P-30) For drawer front/flap door: PWMG0014 YMB011 door profile is same as the left diagram ③;
-When 256mm≤H≤600mm and PWMG0015 YMB012 and D1=D3=50mm,D2=40mm.
256mm≤W≤1200mm,door profile -Front face coated with PVC foil YMB031 -When 160mm≤W<210mm
is same as the left diagram ①; and 248mm≤H≤1450mm,
W door profile is same as the left diagram ③;
and D1=D2=55mm, D3=46mm.
-When 200mm≤H<256mm and D1=50mm,D2=D3=35mm.
-When 145mm≤W<160mm
H
and 256mm≤W≤1200mm,
door profile is same as the left diagram ②; and 248mm≤H≤1450mm,door profile
② and D1=D2=55mm,D3=35mm. is same as the left diagram ③;
-When 158mm≤H<200mm ① and D1=50mm,D2=25, D3=35mm. YMB001
and 256mm≤W≤1200mm, -When 20mm≤W<145mm, YMB003
YMG020 door is flat, edges routed. -Door thickness:19mm YMB005
door profile is same as the left diagram ②;
(YMG47) -Front face coated YMB011
and D1=45mm,D2=55mm and D3=35mm.
-When 30mm≤H<158mm and For drawer front/flap door: with PVC foil YMB012
98mm≤W≤2400mm, door is flat, -When 248mm≤H≤600mm and YMB015
edges routed. 248mm≤H≤1200mm,door profile YMB026
is same as the left diagram ①;
and D1=D2=D3=50mm.
For door: -When 230mm≤H<248mm
-When 198mm≤W≤650mm and ② and 248mm≤W≤1200mm, door profile
197mm≤H≤1450mm,door profile is is same as the left diagram ②;
same as the left diagram; and D1=D2=D3=50mm.
and D1=D2=80mm. -When 210mm≤H<230mm
-When 20mm≤W<198mmm and 248mm≤W≤1200mm, door profile
and 97mm≤H≤2400mm, is same as the left diagram ③;
YMB001
door is flat, corner rounded. -Door thickness:23mm. and D1=40mm, D2=D3=50mm.
H
Notes: not all door styles can be high-gloss PVC coated; only door styles marked with * can match both high-gloss and non high-gloss PVC. Notes: not all door styles can be high-gloss PVC pressed; only those door styles marked with * can match both high-gloss and non high-gloss PVC.
YMB001
-Door thickness:25mm YMB002
-Front face coated with PVC foil YMB003
For door: YMG058 -This door style does not match YMB005
-When 198mm≤W≤650mm high gloss PVC foil. YMB012
and 198mm≤H≤1450mm,door profile is YMB031
same as the left diagram; frame is 18mm
thick MDF and core is 5mm thick MDF.
-When 20mm≤W<198mmm and For drawer front/flap door:
97mm≤H≤2400mm,door is flat, -When 148mm≤W≤1200mm
YMB001
corner rounded. -Door thickness:23mm and 148mm≤H≤600mm,drawer front/flap
YMB002
-Front face coated with PVC foil YMB003 door profile is same as the left diagram.
YMG027 -When 20mm≤W<148mm
(YMG54) -This door style does not match YMB005
high gloss PVC foil. YMB012 and 20mm≤H≤600mm,door is flat,
For drawer front/flap door: YMB031 corner rounded.
-When 198mm≤H≤600mm -Drawer front/flap door structure:
and 198mm≤W≤1200mm,door profile core is 9mm thick MDF, and frame is
is same as the left diagram; frame is 18mm thick MDF; core and frame are
18 thick MDF and core is 5mm thick MDF. glued together.
-When 20mm≤H<198mmm and
98mm≤W≤2400mm, drawer front and
flap door is flat, corner rounded.
Notes: not all door styles can be high-gloss PVC coated; only door styles marked with * can match both high-gloss and non high-gloss PVC.
For door:
-When W≥238mm and H≥238mm,
frame width is 80mm;core panel is
raised and door profile is same as the
left diagram.
-When 168mm≤W<238mm For sliding door/drawer front:
or 168mm≤H<238mm, frame width is -Frame is made of aluminum;
80mm;core panel is 5mm thick flat MDF. aluminum stile width is 100mm and rail
-When W<168mm or H<168mm, width is 60mm.
door is flat. -Core is 9mm thick MDF.
-Door thickness:22mm
YMB001 -Available sliding door size:
-Optional PP foil: -Door thickness:25mm
YMD009 YMB002
YMD012B 248mm≤W≤1002mm
PWMD0004,PWMD0009 -Optional PP foil:PWMD0012
(YMD14) YMB003 NONE
-Both faces wrapped with PP (YMD17B) and 184mm≤H≤2200mm.
YMB005 -Both faces wrapped with PP.
-Distressed when applying -Available drawer front size:
YMB028
For drawer front /flap door: PP foil PWMD0009 248mm≤W≤1200mm
-When W≥238mm and H≥238mm, and 184mm≤H≤600mm.
frame width is 80mm;core panel is -This door style does not match hinges,
raised and door pattern is same as so it is used as sliding door or
the left diagram. drawer front only.
-When 168mm≤W<238mm
or 168mm≤H<238mm,frame width is
80mm; core panel is 5mm thick flat MDF.
-When W<168mm or H<168mm,
drawer front/flap door is flat.
PVC Foil Grade A Base: 18/21/25mm thick MDF; front face coated with PVC foil, back face coated with white melamine
DOOR ILLUSTRATION
BASE/DOOR THICKNESS/ OPTIONAL FRAMED
PICTURE
STYLE DOOR/DRAWER SIZE LIMITS/TECHNICS FINISH GLASS DOOR
PVC Foil Grade G Base: 18mm thick MDF; front face coated with PVC foil, back face coated with white melamine Decorative Accessories
11 0
(AL-08) -PVC foil coated
PWMG0029(G043) High gloss PWMG0034(G020) PWMG0031(35302) PWMG0037(WBMG413) YSL014 -Base: MDF block/solid wood moldings
L=2300mm/PC
110
(AL-09) -PVC foil coated
70
(YSL26) -PVC/PP foil coated
60
-Base:MDF
YSL038
(YSL38) -PP foil PWMD0001 coated, with golden L=2300mm/PC
paint
PP Foil Grade G Base: 21/25mm thick MDF; frame and core structure; both faces wrapped with PP foil YSB009
(AB08) -Base: MDF
-PVC foil coated Thickness=50mm
YSB011 (high gloss PVC excluded)
(AB10)
50
YSB019 -Base: MDF
(YSB36) Thickness=50mm
-PVC foil coated
PWMD0008(WBMD203) PWMD0009(WBMD204) PWMD0010(WBMD205) PWMD0011(WBMD206)
W
YSB018 -Base: MDF
Thickness=18/22/25mm
D
(YSB29) -PVC/PP foil coated
Decorative YSB049
panel/trim (YSB60A) -Base: MDF
PWMD0012(WBMD207) PWMD0013(WBMD208) PWMD0045 PWMD0048 -PVC foil coated
W=50mm
(high gloss PVC does not match
YSB050 this door style, except PWMG0019)
(YSB60B)
-Base: MDF
YSB055
-PVC foil coated
(YSB65)
(high gloss PVC foil excluded)
ILLUSTRATION
Decorative Accessories DOOR
PICTURE BASE/DOOR THICKNESS/ OPTIONAL FRAMED
STYLE DOOR/DRAWER SIZE LIMITS/TECHNICS FINISH GLASS DOOR
W
80 -Base: MDF
YSB027
50
Base: 18mm thick particle board. Finish: front face coated with grade D laminate, back face coated with white laminate;
Laminate Grade D or both faces coated with grade D laminate.
PWMF0022(WBMF310)
Laminate Grade G Base:18mm thick particle board. Finish: front face coated with grade D laminate, back face coated with white laminate;
or both faces coated with grade D laminate.
Grain Direction for HPL Doors And Drawers
GRAIN DIRECTION FOR
MATERIAL CODE STANDARD SHEET GRAIN DIAGRAM OF PLAIN BOARD GRAIN DIRECTION
DRAWER FRONT NOTES
SIZE(D*L*W) A represents door, B represents standard sheet. FOR DOOR FRONTS
AND FLAP DOOR
2440
H
PWMF0019 A W
1220
19*2440*1220 B Horiziontal Horiziontal
(WBMF425)
PWMF0003(300) PWMF0001(6661) PWMF0004(WBMF412) PWMF0005(WBMF413)
2440
H
PWMF0020 A W
1220
19*2440*1220 B Vertical Horiziontal
(WBMF427)
2440
H
PWMF0009(WBMF423) PWMF0011(WBMF426) PWMF0015(WBMF431) PWMF0016(WBMF432) PWMF0021 A W
1220
Laminates B
19*2440*1220 Vertical Horiziontal
Grade D (WBMF309)
2440
H
PWMF0022 A W
1220
19*2440*1220 B Vertical Horiziontal
(WBMF310)
PWMF0017(WBMF433) PWMF0047 PWMF0048
2440
H
PWMF0012 A W
1220
19*2440*1220 B Vertical Horiziontal
(WBMF428)
2440
H
PWMF0004 A W
1220
19*2440*1220 B Vertical Horiziontal
(WBMF412)
2440
H
PWMF0015 A W
1220
19*2440*1220 B Vertical Horiziontal
(WBMF431)
2440
H
Laminates PWMF0016 A W
1220
19*2440*1220 B Vertical Horiziontal
Grade G (WBMF432)
2440
H
PWMF0008 A W
1220
19*2440*1220 B Vertical Horiziontal
(WBMF422)
2440
H
A W
1220
PWMF0048 19*2440*1220 B Vertical Horiziontal
DOOR ILLUSTRATION Melamine Grade E Base:18mm thick particle board. Finish:both faces coated with melamine.
BASE/DOOR THICKNESS/ OPTIONAL FRAMED
PICTURE
STYLE DOOR/DRAWER SIZE LIMITS/TECHNICS FINISH GLASS DOOR
W
-Door thickness:18mm YMB006
YMA001
4 edges sealed with PVC -Both faces coated with YMB008
(A-F) H melamine YMB011
PWMA0014(WBMA328) PWMA0015(WBMA341) PWMA0016(WBMA327) PWMA0054(WBMA331)
Melamine Grade G Base:18mm thick particle board. Finish:both faces coated with melamine.
W
YMA012
-Door thickness:18mm
(A-SA) H Bar handle:PWWK0010. -Both faces coated with NONE
melamine
PWMA0052(WBMA329) PWMA0055(WBMA332) PWMA0056(WBMA333) PWMA0057(WBMA334)
H=60mm
W
Decorative Accessories
50
YMA022 Edges sealed with ABS band. -Both faces coated with YMB008 moulding YSL001 is silver and YSL003 is white.
H melamine YMB011
YSL003( AL-12)
54
YSR001( AR-04)
Light This crown molding is made from plastic;
Melamine Grade D Base:18mm thick particle board. Finish: both faces coated with melamine. YSR003( AR-06) YSR001 is silver,YSL003 white and YSR
cornice 54
is maple color.
YSR004( AR-07)
Grain Direction for Melamine Doors And Drawers Grain Direction for Melamine Doors And Drawers
STANDARD SHEET GRAIN DIAGRAM OF PLAIN BOARD GRAIN DIRECTION GRAIN DIRECTION FOR STANDARD SHEET GRAIN DIAGRAM OF PLAIN BOARD GRAIN DIRECTION GRAIN DIRECTION FOR
MATERIAL CODE FOR DOOR FRONTS
DRAWER FRONT NOTES MATERIAL CODE FOR DOOR FRONTS
DRAWER FRONT NOTES
SIZE(D*L*W) A represents door, B represents standard sheet. AND FLAP DOOR SIZE(D*L*W) A represents door, B represents standard sheet. AND FLAP DOOR
2440 2440
H H
PWMA0041 A PWMA0052 A W
1220
W
1220
18*2440*1220 B Horiziontal Horiziontal (WBMA329) 18*2440*1220 B Vertical Horiziontal
(C502)
2440 2440
H H
1220
W
1220
18*2440*1220 B Horiziontal Horiziontal 18*2440*1220 B Vertical Horiziontal
Grade D (C503) (WBMA332)
2440 2440
H H
PWMA0028 A W PWMA0056 A W
1220
1220
18*2440*1220 B Horiziontal Horiziontal (WBMA333) 18*2440*1220 B Vertical Horiziontal
(WBMA701)
2440 2440
H H
PWMA0015 A W
PWMA0057 A
1220
W
18*2440*1220 Vertical Horiziontal
1220
(WBMA341) B 18*2440*1220 B Vertical Horiziontal
(WBMA334)
Melamine
2440
H Grade G 2440
H
PWMA0054 A W
18*2440*1220 B 1220 Vertical Horiziontal PWMA0058 A W
1220
(WBMA331) 18*2440*1220 B Vertical Horiziontal
(WBMA336)
2440
H
2440
PWMA0061 A W H
1220
1220
18*2440*1220 B Vertical Horiziontal
(WBMA339)
Melamine
Grade E 2440
H
A W 2440
1220
PWMA0047 A W
1220
18*2440*1220 B Vertical Horiziontal
(WBMA317)
2440
H
A W
1220
1220
(WBMA320) 18*2440*1220 B Horiziontal Horiziontal
2440
H
A W
1220
2440
H
PWMA0002 A W
1220
2440
H
PWMA0005 A W
1220
Melamine
Grade G 2440
H
PWMA0008 A W
1220
2440
H
PWMA0049 A W
1220
Base:18mm thick MDF. Front face laminated with high gloss acrylic,high gloss PVC or high gloss PETG deco paper
DOOR ILLUSTRATION Flat Laminate Grade A Back face coated with white melamine.
BASE/DOOR THICKNESS/ OPTIONAL FRAMED
PICTURE
STYLE DOOR/DRAWER SIZE LIMITS/TECHNICS FINISH GLASS DOOR
YMB006
YMP001 H Edges sealed with 2mm thick
Door thickness:19mm YMB008
(YMP01) PVC or 1.5mm thick acrylic band. PWMP1001(WBMP102) PWMP1003(WBMP104) PWMP1006(WBMP107) PWMP1010
YMB011
Base:18mm thick MDF. Front face laminated with high gloss acrylic,high gloss PVC or high gloss PETG deco paper
W Flat Laminate Grade D Back face coated with white melamine.
-Bar handle:PWWK0001/
YMB006
H PWMK0003.
YMP002 Door thickness:19mm YMB008 PWMP1007(WBMP101) PWMP1009(WBMP504) PWMP1011 PWMP1012
-3 edges sealed with 2mm thick
(YMP02) YMB011
PVC or 1.5mm thick acrylic band.
YMP008
(YMP08) Arc door. Door thickness:19mm
R300
Toughened Glass Door insert: 5mm thick glass, frame: 17mm thick aluminum frame
DOOR ILLUSTRATION
PICTURE FRAME/DOOR THICKNESS OPTIONAL HINGES
STYLE DOOR/DRAWER SIZE LIMITS/TECHNICS
YMQ001A
(YMQ01A)
YMQ002A
(YMQ02A)
W
Glass insert is sealed with plastic
-Optional finish: lacquer, PVC foil, PP foil,
trim while door finish is lacquer/
YMB001 painted solid wood.
PVC/PP,and sealed with solid wood
(D-02) H -Base/door thickness is subject to door finishes.
trim while door is solid wood.
YMB002
Size limits:
(D-03) H
296mm≤W≤600mm and
447mm≤H≤1450mm.
YML003(LH-M08) (silver)
Door structure:
Code YML001(LH-M02) Code YML002(LH-M05)(silver) Code YML005(LH-M10) Code YML003B(LH-M08B) -Optional finish: painted solid wood,
YML002B(LH-M05B)(black) (Champagne Color) -When 447mm≤H<600mm, PVC foil, PP foil.
YML003C (black)
door has 2 horizontal bars. -Base/door thickness is subject to door finishes.
Insert Glass or acrylic Insert Glass or acrylic Insert Glass or acrylic W -When 600mm≤H≤1200mm,
Insert Aluminum shutter,acrylic
door has 3 horizontal bars.
Section -When 1200mm<H≤1450mm,
Section Section Section
YMB003 door has 4 horizontal bars.
H
33 (D-04)
60
Door height≤900
and door width≤450.
W W
Insert Yellow/purple/balck acrylic Insert Red acrylic PWMV0011 Insert Glass YMB006 -Optional finish:melamine, HPL, acrylic,
H
(D-10) flat laminate.
-Base/door thickness is subject to door finishes.
Section Section Section
16.4
21
5.8
49.5
55
4 -Base: MDF
H
YMB007 -Door thickness:25mm
Notes: -Door style YML005 matches hinges PWWM0030/PWWM0032/PWWM0041/PWWM0044/PWWM0045. (D-11) -Finish:lacquer
W
-Door style YML003/YML003B/YML003C matches hinges PWWM0034/PWWM0035/PWWM0038/PWWM0039.
-As door style YML002/YML002B with glass insert can not be drilled for installing handles/knobs, as an alternative, black insert is 4.5mm thick acrylic
base cabinets can apply aluminum bar handle PWWK002,and wall cabinets apply aluminum bar handle PWWK0009.
(find bar handles at page 066).
W Door structure:
-When 447mm≤H<600mm,
door has 2 horizontal bars. -Base:MDF
YMB009
-When 600mm≤H≤1200mm, -Door thickness:19mm
(D-14)
door has 3 horizontal bars. -Optional finish: PVC foil -Frame: birch painted.
-When 1200mm<H≤1450mm, YMB010 -Matching door style YMM016(YMM42).
-Door thickness:21mm
door has 4 horizontal bars. (D-15) -Available size: 497*697mm
-Optional glass:PWMB0012
-Door sizes:
YMB010 597mm*1316mm,597mm*1369mm
(D-15) -Suitable for door style YMM016 only
-Glass insert:PWMB0019
H
(D-24) -Frame: cherry wood painted
H -Door available sizes: -Door thickness:21mm W≥297mm and H≥697mm.
YMB010 -Frame is painted red oak
347mm*697mm,397mm*697mm,
(D-15) -Optional glass:PWMB0012
447mm*697mm,497mm*697mm,
497mm*1007mm。
Suitable for door style YMS008. -Base: plywood YMB028 -Suitable for door style YMD009 -Frame: MDF
YMB022 (D-36) -W≥798mm and H≥238mm -Door thickness: 22mm
H≤2090mm; diamond moldings -Door thickness: 21mm
(D-30)
on door face. -Door finish: acrylic PWMS0012
Glass
DOOR ILLUSTRATION
PICTURE BASE/DOOR THICKNESS/FINISH
STYLE DOOR/DRAWER SIZE LIMITS/TECHNICS
Glass Glass
Name SQUARE Name PETAL Name MIRROR Name ETCHED FLOWER Name DIAMOND
Code PWMB0009 Code PWMB0011 Code PWMB0021 Code PWMB0025 Code PWMB0086
Thickness 5mm Thickness 6mm Thickness 5mm Thickness 5mm Thickness 5mm
Matched Door Style YMM002/YMM004/YMB010 Matched Door Style YMM013/YMB010 Application used as decorative panel Door Size W598mm*H957mm,W448mm*H697mm, Door Size W497mm*H797mm
W448mm*H797mm,W448mm*H356mm,
W598mm*H347mm
Door Style YMM076/YMM078
Acrylic
FRONT EDGE
MATERIAL PROFILE NAME PROFILE CODE PROFILE DWG
THICKNESS(MM)
Name GREEN TRANSPARENT Name BLUE TRANSPARENT Name TRANSPARENT Top round edge (R8) 38
YTR002B
38
(R-L38)
Code PWMV0004 Code PWMV0005 Code PWMV0006
Dupont
YTR002D
Corian acrylic/ Top round edge (R8) 90 90
(R-L90)
OPPEIN
solid surface
grade AA
Name YELLOW OPAQUE Name BLACK TRANSLUCENT Name CHAMPAGNE TRANSLUCENT Bevel edge antispill 38 YTR003B 38
(R-XF38)
Code PWMV0007 Code PWMV0008 Code PWMV0009
Notes:
In order to bear the weight and impact evenly from countertops,support rails are fixed on the back side of coutertops as profiles show.
We fix aluminum support rails for 38mm/40mm/58mm/60mm thick countertop; and equivalent stone support rails for other countertops.
YTS001A YTS007B
Straight edge 20 20 Triple waterfall bullnose
(S-Z25) (S-T38) 40
YTS001B
Straight edge 40 40
(S-Z38) YTS004B
Roman edge 40 40
(YTS112)
YTS001C
Straight edge 60 60
(S-Z60)
YTS004C
Roman edge 60 (YTS114) 60
YTS001D
Straight edge 90 90
(S-Z90)
YTS011A
Sharknose (YTS17) 20
YTS001E
Straight edge 120 120
(YTS19)
YTS012A
Chamfer 20
YTS001F (YTS18)
Straight edge 150 150
(YTS20)
YTS002C YTS005E
Top round edge 60 60 Bevel edge 120
(S-L60) (YTS22) 120
YTS002D
Top round edge 90 90
(S-L90) YTS008C
Cloud edge 60 60
(YTS14)
YTS005B
Bevel edge 40 40
(S-R38)
Knife edge 60 YTS009C
(YTS15) 60
YTS005C
Bevel edge 60 60
(S-R60)
Notes: Notes:
In order to bear the weight and impact evenly from countertops,support rails are fixed on the back side of coutertops as profiles show. In order to bear the weight and impact evenly from countertops,support rails are fixed on the back side of coutertops as profiles show.
We fix aluminum support rails for 38mm/40mm/58mm/60mm thick countertop; and equivalent stone support rails for other countertops. We fix aluminum support rails for 38mm/40mm/58mm/60mm thick countertop; and equivalent stone support rails for other countertops.
Silestone Thickness:20mm
SINK INSTALLATION MATCHED COUNTERTOP
PROFILE CODE PROFILE
TYPE MATERIAL
Topmount YTZ001(TS)
Undermount
(indirect drainage) YTZ003(TXJ)
Caesarstone Thickness:20mm
MATCHED COUNTERTOP
SINK HOLE NAME PROFILE CODE PROFILE
MATERIAL
R4- R5
C2- C3
Chamfer Edge
YTI002 Check the table below
C1. 5±1
PWTY1033
PWTR0006(WTK01)
PWTY1012(WTY137) PWTY1013(WTY138) PWTY1014(WTY140) PWTY1015(WTY146)
Solid Surafce
RX016 PT516
PWTY1020(WTY155) PWTY1021(WTY156)
PWGF0006 PWGF0007
W/ logo on edge band W/ logo on edge band
Standard A Carcase Coat: melamine Base: 16mm thick green-core particle board W/O logo on carcase panel or edge band
HG036 HG037
Standard B Carcase Coat: melamine Base: 16mm thick white-core particle board W/O logo on carcase panel
PVC Edge Band size: thickness×width(mm) PVC Edge Band size: thickness×width(mm)
PWFP0382(size:2×23) PWFP0383(size:2×23)
PWFP0382(size:1.5×42)
OPPEIN PVC Edge Band Thickness: 2mm Width: 23mm Door & Edge Band Standard Configuration
Material Door Finish Door Edge Band Filler Edge Band
(thickness×width) (thickness×width)
PWMF0019 PWFP0050(2*23mm) PWFP0050(0.6*23mm)
PWMF0020 PWFP0056(2*23mm) PWFP0056(0.6*23mm)
PWMF0021 PWFP0043(2*23mm) PWFP0081(0.6*23mm)
PWMF0022 PWFP0066(2*23mm) PWFP0102(0.6*23mm)
PWFP0045(WFMP31)
PWMF0003 PWFP0028(2*23mm) PWFP0028(0.6*23mm)
PWMF0001 PWFP0029(2*23mm) PWFP0102(0.6*23mm)
Acrylic Edge Band Thickness: 1.2mm Width: 23mm
PWMF0004 PWFP0035(2*23mm) PWFP0102(0.6*23mm)
PWMF0005 PWFP0038(2*23mm) PWFP0038(0.6*23mm)
PWFP0009(WFMP41)
Door & Edge Band Standard Configuration Decorative Caps For Idle Holes
Material Door Finish Door Edge Band Filler Edge Band Caps for Ø5mm Caps for 1*Ø17mm Caps for 0.4*Ø13mm
(thickness×width) (thickness×width) Matched Carcase Finish
System Holes Hettich Cams Screw Caps
PWMC0003 PWFP0040(2*23mm) PWFP0028(0.6*23mm)
PWMC0005 PWFP0035(2*23mm) PWFP0102(0.6*23mm)
PWMC0006 PWFP0033(2*23mm) PWFP0033(0.6*23mm) PWGA006
PWMC0007 PWFP0036(2*23mm) PWFP0098(0.6*23mm) Cream White White White
PWMC0008 PWFP0068(2*23mm) PWFP0100(0.6*23mm)
PWMR0013 Same color ABS edge band(0.8*23mm) Same color ABS edge band(0.8*23mm)
PWGA0001/PWGF0001
PWMR0014 Same color ABS edge band(1*23mm) Same color ABS edge band(1*23mm)
Clay Bronze Wenge
PWMR0011 PWFP0025(1.2*23mm) PWFP0025(1.2*23mm)
PWMR0001 PWFP0019(1.2*23mm) PWFP0019(1.2*23mm)
PWMR0002 PWFP0027(1.2*23mm) PWFP0027(1.2*23mm) PWGA0004/PWGF0004
Acrylic PWMR0003 PWFP0024(1.2*23mm) PWFP0024(1.2*23mm) Brown OPPEIN Red OPPEIN Red
(19mm)
PWMR0004 PWFP0017(1.2*23mm) PWFP0017(1.2*23mm)
PWMR0005 PWFP0018(1.2*23mm) PWFP0018(1.2*23mm)
PWGA0009/PWGF0006
PWMR0006 PWFP0022(1.2*23mm) PWFP0022(1.2*23mm)
Grey Cloth Grey Cloth Grey Cloth
PWMR0008 PWFP0021(1.2*23mm) PWFP0021(1.2*23mm)
PWMR0009 PWFP0023(1.2*23mm) PWFP0023(1.2*23mm)
PWMR0010 PWFP0026(1.2*23mm) PWFP0026(1.2*23mm) PWGA0010/PWGF0007
Cream White White Cream White Cloth
Code Code
Code & Depth Code & Depth
PWFL0010B(WFMF18B) PWFL0010C(WFMF18C)
PWFL0002(FB-F08) PWFL0001(FB-F10) Silver Champagne
D=16mm D D=19.5/20.5/21.5mm
Application Application
Application Application Only suitable for YMQ001B Only suitable for YMQ001C
Matching movable shelf Matching HPL (door style F-FA/F-LA); (YMQ01B)YMQ002B(YMQ02B) (YMQ01C)YMQ002C(YMQ02C)
melamine, UV lacquer, metal foil (door W≥53mm W≥53mm
style A-LA/A-SL); acrylic (door style S-LA/
S-SL); flat laminate (YMP03/YMP04).
13
D=20mm
22
Application Application
Matching flat laminate panel, 1. Matching solid wood, door style YMN002
(YMM35); aluminum bar handle PWWK0020
door style YMP006 (YMP06) (WWLK24).
2. PWFL0006B(WFMF13B) Apply for
YMF006(YMF06)
22 . 5
Application Application
Matching acrylic door style Only suitable for YMQ001A(YMQ01A)
YMS008(YMS08) YMQ002A(YMQ02A), W≥53mm
35
D=19/20/21mm D=19/20/21mm Handle treatment: oxidation. Handle treatment:
sandblasting & oxidation;
D
Application Application
Matching with 19-21mm thick flat Matching with 18mm-19mm thick
profile door, the standard size is flat profile door, the standard size is
298,398,448,498,548,598,798,898, 298,348,398,448,498,548,598,
998,1198 698,798,898,998,1198
Application
Application Application
10
Matching lacquer
40
52
40
52
10
D
D
door style YME002(YME02) with G10007422(WWLK4402)
15 15 15
10 D
Application Application
Matching lacquer door style For flat door only Application
YMK006(YMK21).
Only manufacture standard size(mm):
78,128,228,328,378,428,528,628,728,
828,928,1128,1728,corresponding door
panel width is bar handle length+70mm.
22
Code Code
PWWK0020(WWLK24) PWWK0016(WWLK17)
(Iron grey)
80
PWWK0017(WWLK18)
(Black)
Application
Matching aluminum edge band
PWFL0006(WFMF13)
Matching wood veneer door style
YMN002(YMM35)
Zinc alloy Zinc alloy Zinc alloy Aluminium alloy Aluminium alloy Zinc alloy & ceramic
Hole Total Hole Total Hole Total
Hole Total Code distance length Height Grade
Total Code distance length Height Grade
Code Hole Hole Total Code Height Grade
distance length Height Grade Code distance length Height Grade Code distance length Height Grade distance length
PWWL0001A(LJ246A) 128 PWWL0013A(LJ641A) 128 200 14 B PWWL0012A(LJ634A) 224 242 22 C PWWL0023(LJ801) 76 122 29 B
172 31 B PWWL0181 160 172.5 30 B PWWL0002 128 152 26 C
(LJ409) PWWL0013B(LJ641B) 192 300 14 B PWWL0012B(LJ634B) 384 402 22 B
PWWL0001B(LJ246B) 96 132 31 B
PWWL0013C(LJ641C) 320 400 14 B PWWL0012C(LJ634C) 576 595 22 B
PWWL0013D(LJ641D) 384 500 14 A
PWWL0013E(LJ641E) 512 600 14 A
PWWL0013F(LJ641F) 704 800 14 AA
Only suitable for YMG007(P-08)
Zinc alloy & acrylic Zinc alloy Zinc alloy & ceramic
Hole Total Hole Total Height Grade Hole Total
Code distance length Height Grade Code distance length Code distance length Height Grade
PWWL0051 PWWL0033 PWWL0026
(WWLB122) 160 200 34 A 128 157 29 B (WWLC75) 95 120 32 B
(WWLC101)
Zinc alloy & ceramic Zinc alloy Zinc alloy Zinc alloy & carnelian Zinc alloy & carnelian Zinc alloy
Code Hole Total Hole Total Hole Total Hole Total Hole Total Hole Total
Grade
distance length Height Grade Code distance length Height Grade Code distance length Height Grade
Code distance length Height Grade Code distance length Height Grade Code distance length Height
PWWL0028 PWWL0029 PWWL0034A PWWL0037A 57 29 A PWWL0037B PWWL0038
38 35 C 43 34 C 32 57 21 B (WWLB106B) 96 136 35 A (WWLD107)
128 168 26 C
(WWLD80) (WWLD86) (WWLC102A) (WWLB106A)
Zinc alloy Zinc alloy Zinc alloy Zinc alloy Aluminium alloy Zinc alloy & crystal glass
Hole Total Hole Total Hole Total Hole Total Hole Total Hole Total
Code distance length Height Grade Code distance length Height Grade Code distance length Height Grade Code distance length Height Grade Code distance length Height Grade Code distance length Height Grade
PWWL0032A PWWL0031A PWWL0031B PWWL0041 PWWL0014A(LJ648A) PWWL0044A
30 27 C 45 25 C (WWLD92B) 96 112 28 C 76 38 C 192 211 15 B 16 40 22 A
(WWLD93A) (WWLD92A) (WWLD112) (WWLB115A)
PWWL0014B(LJ648B) 288 307 15 A
PWWL0014C(LJ648C) 480 499 15 A
Zinc alloy Zinc alloy & ABS Zinc alloy & ABS
Hole Total Hole Total Hole Total
Code distance length Height Grade Code distance length Height Grade Code distance length Height Grade Copper Zinc alloy Zinc alloy
PWWL0054 PWWL0055A PWWL0055B Hole Total Hole Total Hole Total
96 146 25.5 C 32 70 22 B 96 120 26 B Code Height Grade Code Height Grade Code Height Grade
(WWLD125) (WWLC126A) (WWLC126B) distance length distance length distance length
PWWL0048A PWWL0043 PWWL0050C
57 12 A (WWLC114) 128 146 28 B (WWLB121C)
128 151.5 27.5 A
(WWLB119A)
For thickened half overlay doors, For thickened full overlay doors, For half overlay doors,
Notes Notes Notes
thickness >22mm thickness >22mm thickness≤22mm
Name BLUM built-in hinge Name BLUM standard hinge(full overlay) Name BLUM 180° quick assembly
Code PWWM0005(WWMB19) Code PWWM0006(BM-J05) Code PWWM0011(WWMB18)
For full overlay doors, For half overlay doors, For full-overlay door of equilateral
Notes Notes Notes
thickness≤22mm thickness≤22mm bevel cabinet
Name BLUM 175° insert assembly(full overlay) Name BLUM bi-fold hinge Name BLUM 175° insert assembly
Code PWWM0030(BM-J11) Code PWWM0031(BM-J14) Code PWWM0032(BM-J15)
Notes For full-overlay door of normal Notes For corner cabinet with bi-fold door. Notes Half overlay
door and arch door. For normal door panel or arch door
Name BLUM 155 ° hinge(full overlay) Name BLUM rebounding hinge(full overlay) Name BLUM rebounding hinge(half overlay) Name Hettich hinge Name Hettich hinge Name Hettich hinge
Code PWWM0041(WWMB32) Code PWWM0048(WWMB43) Code PWWM0025 Code PWWM0012(WWMB39) Code PWWM0013(WWMB40) Code PWWM0015(WWMB35)
Name BLUM 110°quick assembly Name BLUM 110°quick assembly Name 180°hinge Name Hettich 110° hinge Name Hettich 180° hinge Name Hettich 165° hinge
Code PWWM0042(WWMB33) Code PWWM0043(WWMB34) Code PWWM0047(WWMB42) Code PWWM0016(WWMB36) Code PWWM0040(WWMB29) Code PWWM0044(WWMB37)
Notes For half overlay doors, Notes For linear corner cabinet Notes For arch door and cabinet with
Notes Soft closing & full overlay Notes Soft closing & half overlay Notes For corner cabinet thickness≤22mm built-in drawer(full overlay)
For arch door and cabinet with For full-overlay door of equilateral
Matching with hinge For BLUM quick assembly For BLUM quick assembly Notes Notes
Notes Notes Notes built-in drawer(half overlay) bevel cabinet
without damper full-overlay hinge half-overlay hinge
Name 110° Fast Assembly Hinge Name 110° Fast Assembly Hinge Name 95° Fast Assembly Hinge L
Code PWWM0051 Code PWWM0052 Code BWWM0011
Drawer Interior Slide
Code Panel Height length Carcase net depth Drawer front height Notes
Matched door thickness≤22mm; Matched door thickness≤22mm; Matched door thickness>22mm; PWWWC001FA
Notes full overlay; opening angle:110°; Notes half overlay; opening angle:110°; Notes full overlay;opening angle:95°; (WWWC09) 84mm 450mm 465mm≤D<515mm
-Soft closing
fast assembly; integrated buffer. fast assembly; integrated buffer. fast assembly;integrated buffer. 130mm ≤H <222mm -Bottom panel thickness: 16mm
PWWWC001GA
(WWWC10) 84mm 500mm D≥515mm
L
Name 95° Fast Assembly Hinge Name 180° Fast Assembly Hinge Name 155° Fast Assembly Hinge
Drawer Interior Slide
Code BWWM0012 Code BWWM0009 Code BWWM0010 Code Panel Height length Carcase net depth Drawer front height Notes
PWWWC001FB
For arc-door cabinets with drawers; 135mm 450mm 465mm ≤D <515mm
Matched door thickness>22mm; For linear corner cabinet only; (WWWC11)
222mm ≤H <310mm
-Soft closing
Notes half overlay; opening angle:95°; Notes matched door thickness≤22mm; Notes
matched door thickness:18~25mm; PWWWC001GB
135mm 500mm D≥515mm
-Bottom panel thickness: 16mm
fast assembly; integrated buffer. opening angle:100°; fast assembly; full overlay; opening angle:155°; (WWWC12)
Name 135° Fast Assembly Hinge Name Rebounding Full Overlay Hinge Name Long magnetic rebounder L
L
Name 45° soft closing Name Long magnetic rebounder
Drawers Drawers
BWWWF002A PWWWZ002F
265mm≤D<315mm (WWWZ14) 455mm≤D<505mm
(NL=250)
PWWWZ002G
(WWWZ15) 505mm≤D<555mm
PWWWZ002H
(WWWZ16) 555mm≤D<605mm
Notes: -Soft closing
Notes: Drawer width=carcase net width-10mm -Side panel thickness: 16mm
-Half extension
Slide
PWWWT001H
(NL=560mm) D≥570mm
Code PWWA0002(WWA02) AVENTOS HK-XS: Small fitting for small top wall cabinets
Door Width(solid wood/
Door Width(MDF Door width(Aluminum
Door Height plywood/particle board
based door) based door)
Framed Glass Door )
AVENTOS HK-XS: Small fitting for small top wall cabinets AVENTOS HS: Up and over lift system
Code PWWY0004(BM-06)
AVENTOS HF WITH SERVO-DRIVE: Bi-fold Lift System Door Width(MDF
Door Width(solid wood/
Door width(Aluminum
Door Height plywood/particle board
based door) based door)
Framed Glass Door )
Code PWWF0014(WWF08)
Door Width(solid wood/
Door Width(MDF Door width(Aluminum
Door Height plywood/particle board
based door) based door)
Framed Glass Door )
Matched
Door Size 250 600-900 600-1000 600-1000
(mm)
300 600-700 600-800 600-800
-Door thickness≤19mm
-This lift can be fit for aluminum framed glass door
Application YML001,YML002.
-2 hinges required if door width ≤900mm,3 hinges required
if 900mm<door width≤1200mm.
Lacquer, melamine, HPL, solid wood, UV lacquer, Matched Door Width 400mm≤W≤500mm
Matched acrylic, PVC, flat laminated and all wood framed
door glass doors. Matched Door Height 590mm≤H≤500mm
Rolling Door
Code PWWY0011L/R(WWY11L/R)
Matched Door
W=600mm
Width
Matched Door
2090mm(door H=2087mm)
Height
Matched Carcase
550mm(side panel depth=660mm)
Depth
Material Code Height Material Code Height Material Code Height Material Code Height
PWND0001B 105mm PWND0002B 105mm PWND0005B PWND0004B
(BL-B01H11) (BL-B02H11) (BL-B05H11) 105mm (BL-B06H11) 105mm
PWND0001D PWND0002D Black PWND0005D PWND0004C
Black 155mm Silver 155mm 155mm White (BL-B06H13) 135mm
(BL-B01H16) (BL-B02H16) (BL-B05H16)
aluminum aluminum plastic plastic PWND0004D
PWND0001A PWND0002A PWND0005A (BL-B06H16) 155mm
Code Name Application Code Name Application (BL-B01H08) 80mm (BL-B02H08) 80mm (BL-B05H08) 80mm
PWND0005C PWND0004A 80mm
PWND0001C 135mm PWND0002C 135mm 135mm (BL-B06H08)
-Matching wood-based doors and wood framed doors. (BL-B01H13) (BL-B02H13) (BL-B05H13)
PWWT0016 Simple sliding Carcase panel thickness PWWT0015 Simple sliding
-Matching aluminum framed glass door YML001
(BM-BT03) door fitting (BM-BT02) door fitting
must be 25mm /YML002/YML004/YML008
Pull Rod
Material Code Height Material Code Height Material Code Height Material Code Height
PWND0006B PWND0003
(BL-B07H11) 105mm (BL-B03H11) 105mm YSJ011(YSJ11) 80mm PWND0008B 105mm
Grey PWND0006C 135mm PWND0003 135mm Door YSJ012(YSJ12) 110mm Gun-grey PWND0008D 155mm
plastic (BL-B07H13) Metal foil (BL-B03H13)
panel aluminum
PWND0006D PWND0003
(BL-B07H16) 155mm (BL-B03H16) 155mm YSJ013(YSJ13) 130mm
PWND0006A PWND0003
(BL-B07H08) 80mm (BL-B03H08) 80mm YSJ014(YSJ14) 160mm
450mm≤W≤1000mm
-Matching wooden doors, or wood framed glass door(frame width≥60mm). 300mm≤H≤1200mm
PWWT0019
-Thickness of top/bottom/shelf panel thickness must be at least 18mm.
(WWT07) The height of sliding door can not
-Silent moving. be 2 times larger than its width
Shelf Fittings
Name Metal Leg Name Metal Leg Name Metal Leg Name Metal Leg
Name Shelf clamp Name Shelf bracket Name Wall-mounted groove Name T-shape bracket
PWNC0006(WWCM07)
Code PWNC0004(BCB-J2) Code Code PWNQ0023 Code PWNC0006A(WWCM07A)
PWNC0005(BCB-J3)
Shelf depth:250≤D<400
PWNC006(WWCM07) suitable for
Thickness 8mm glass Thickness 3~25mm thick glass Notes Size: L=2489 mm Thickness wood shelf >50mm
PWNC006A(WWCM07A) suitable for
or wood shelf LED stripe:13W /meter wood shelf 30≤D≤50mm
Name PVC finished support Name Support Leg Name Support Leg Name Support Leg
Aluminum Rack
Code PWNS0001A(LH-J03) Code PWNS0003A(LH-J01A) Name Code Name Code Name Code
PWNS0001B(LH-J03) PWNS0003B(LH-J01A) Aluminum Beam WGH03 Steel Foil WBMX03 Movable Shelf Bracket WGC10
PWNS0003C(LH-J01A)
PWNS0004A(WWS04A):
W1250mm*H415mm*D169mm, 1.Available size:
Size Fixed Size Size 200≤W≤1000,
300≤H≤600,
PWNS0004B(WWS04B):
W1200mm*H415mm*D169mm, 200≤D≤1000. Name Code Name Code Name Code
Fixed Size 2.Matching 16-20mm
thick shelf. Hettich Cam
PWNS0004C(WWS04C):
W1200mm*H415mm*D169mm, & Connecting Bolt Wood dowel Suspension bracket
Fixed Size
PWNS0004D(WWS04D):
W600mm*H415mm*D169mm,
Fixed Size
Hardware
Door
Cabinet Size(mm)
Function Function Function No Cabinet Picture Code Structure Notes
Direction
To reinforce wall To hang wall
W D H
To hold gas cylinder
cabinet structure cabinets. BD01-2076 200
(W>=900mm)
BD01-3076 300
BD01-3576 350
1 1 door BD01-4076 L/R 400 600 762
BD01-4576 450
BD01-5076 500
Name Code Name Code Name
BD01-6076 600
Gas Cylinder Castor WWR03 Reinforce Rod WWR12 Hettich Concealed
Hanging Bracket BD02-6076 600
BD02-7076 700
BD02-8076 800
2 2 doors 600 762
BD02-9076 900
Function Function
BD02-10076 1000
Used to joint To prevent tall doors
cabinet units from bending, when BD02-12076 1200
the height of door
together. BD03-6076 600
panel is ≥1400mm,
door straightener
shall be fixed on BD03-7076 700 -W/O shelf
the back face of and back
door panel.
Sink BD03-8076 800 panel;
3 600 762 -Bottom panel
cabinet A BD03-9076 900
aluminum foil
Name Size Name BD03-10076 1000 sealed
BD04-12076 1200
-W/O shelf
and back
Sink panel;
5 BD07-6076 L/R 600 600 762 -Bottom panel
cabinet C
aluminum foil
sealed
-W/O shelf
and back
Sink panel;
6 BD08-6076 L/R 600 600 762 -Bottom panel
cabinet D
aluminum foil
sealed
BD05-8076 800
BD05-12076 1200
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
Door BE05-9076 900 -Thickened
BA03-8676 864 864 width= Lazy
Angled back panel
350mm 26 susan BE05-10076 L/R 1000 600 762 -Carcase
18 corner L/R 762
Door cabinet width
cabinet BE05-11076 1100 ≥900mm
BA03-9076 902 902 width=
400mm
180° BE06-8076 800
Door rotation
Excircle 27 BE06-9076 L/R 900 600 762 width≥800mm
R=300mm, basket
19 corner BA04-9476 L/R 940 940 762 cabinet
matching BE06-10076 1000
cabinet 175°hinge
W D BE07-6076 600
2 equal BE07-7076 700
Door basket
H
28 600 762
Incircle BE07-8076 800
R=300mm, cabinet
20 corner BA05-9276 L/R 921 921 762 matching
cabinet BE07-9076 900
175°hinge
W D BE08-6076 600
H
29 600 762
BA06-13076 1300 -W/O shelf 1 basket BE08-8076 800
and back
Double panel BE08-9076 900
doors -Bottom panel
21 corner L/R 600 762 aluminum foil W D BE09-6076 600
sealed 2 small
cabinet -Filler width BE09-7076 700
BA06-14076 1400 =100mm drawers
H
30 600 762
& 1 big BE09-8076 800
basket
BE09-9076 900
W D BE01-3076 300 W D BE10-6076 600
Multifunc 1 small
tional BE01-3576 350 BE10-7076 700
H
H
basket BE01-4076 400 31 600 762
2 big BE10-8076 800
cabinet baskets
BE01-4576 450 BE10-9076 900
W D D
Side- BE02-1576 150 4-side W BE11-6076 600
mounted W/
H
H
basket stove
cabinet BE02-2076 200 cabinet BE11-9076 900
W D W D BE12-6076 600
Tandem BE03-4576 450 2 equal
BE12-7076 700 W/
baskets/
H
H
33 600 762 vent mesh
stove BE12-8076 800
cabinet BE03-6076 600 cabinet
BE12-9076 900
W
D
BE04-6076 600 1 drawer W D BE13-6076 600
4-side
&1 BE13-7076 700
25 basket BE04-8076 800 600 762 basket W/
H
H
34 600 762
cabinet BE13-8076 800 vent mesh
stove
BE04-9076 900 cabinet BE13-9076 900
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
W D BE14-6076 600 W D
2 drawer& BE23-6076 600
1 basket BE14-7076 700 W/ Sterilizer
H
35 600 762 600 762
H
stove BE14-8076 800 vent mesh 44
cabinet cabinet
BE14-9076 900 BE23-9076 900
W D BE15-6076 600
1 drawer& W D
2 basket BE15-7076 700 W/ 1 BE24-6076 600
H
H
cabinet 45 sterilizer
BE15-9076 900
cabinet BE24-9076 900
D -W/O shelf
W
BE16-9076 900 and back
Basket panel D
W W/
H
H
base door fitting
D
cabinet BM-SY01
W -W/O shelf
BE17-9076 900 and back
Basket
panel BT02-8076 800
38 600 762
H
H
1 small & W
BE18-9076 900 -W/O shelf
2 bigger and back door
BT02-11076 1100
panel
39 basket 600 762
H
-Bottom panel
sink aluminum BT02-12076 1200
cabinet C BE18-10076 1000 foil sealed
D
W -W/O shelf
2 equal BE19-9076 900 and back W D
basket panel
40 600 762
H
H
BE19-10076 1000 foil sealed
W D
360° rotary
D1 W1 Door width
BE20-9076 902 BY02-3076 300
H
H
BE21-6076 600
cabinet
oven
42 600 762
H
W
D BY03-7076 700 R=1040
W D Double
BE22-6076 600
1 drawer/ arch BY03-8076 800 R=1040
600 762
H
50
43 oven 600 762 door
H
cabinet cabinet
BE22-9076 900 BY03-9076 900 R=1305.5
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
BY04-4576 450 R=400 MD01-3013 300
W
D W D
2 equal R=362.5
BY04-5076 500 or 650
arch- MD01-4513 450
51 600 762 Single
H
L/R
H
door BY04-7076 700 R=1040 1 600 1321
door
drawer MD01-5013 500
BY04-8076 800 R=1040
BY04-9076 900 R=1305.5 MD01-6013 600
W D BK05-3076 300
MD02-6013 600
Triangle
52 open BK05-4076 L/R 400 620 762
H
W D
cabinet MD02-8013 800
BK05-5076 500
Double
2 MD02-9013 900 600 1321
H
doors
MD02-10013 1000
MD02-12013 1200
W D
ME01-6013 600
H
vent mesh
H'
ME01-9013 900
W D
H
oven vent mesh
H'
W D
Single
door
H
5 /basket ME03-3013 300 600 1321
middle
cabinet
W D
ME04-4513 450
Tandem
H
6 L/R 600 1372
basket
ME04-6013 600
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
TD03-3020 300
W D
D
TD03-4520 450
W 600 2019
Double TD03-5020 500
doors/ TD03-6020 600
Single
H
7 basket ME05-9013 900 600 1372 1 L/R
H
middle
door TD03-3021 300
cabinet TD03-4521 450
H'
600 2134
TD03-5021 500
TD03-6021 600
TD06-6020 600
TD06-8020 800
W D D
W
1 toast TD06-9020 900 600 2019
oven/ TD06-10020 1000
1 W/
8 ME06-6013 600 600 1321
H
H
oven/
doors TD06-6021 600
1 drawer
H'
TD06-8021 800
TD06-9021 900 600 2134
TD06-10021 1000
TD06-12021 1200
W D
H
vent mesh, 3 L/R 600
&
Lift up matching
H'
9 ME07-6013 L/R 600 600 1321 1 door
H
H
door
H'
W D MK02-3013 300 TE02-6021 600 2134
Triangle W D
10 open MK02-4013 L/R 400 620 1321
TE03-6020 600
H
cabinet 2019
1 door/
5 1 oven/ L/R 600
H
MK02-5013 500 2 drawers
H'/2
H'
TE03-6021 600 2134
W
D MY02-3013 300 D
W
H
cabinet
3 drawers
H'/3
H'
MY02-5013 500 TE04-6021 600 2134
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
W W D
D
TE05-4520 450
2019 TE12-6020 600 2019
Single
door TE05-6020 600
Refrigerator W/O back
7 L/R 600
H
14 L/R 600
H
basket cabinet B panel
TE05-4521 450
caibnet
H'
2134 TE12-6021 600 2134
TE05-6021 600
D
W W D
15 L/R 600
H
cabinet C panel
H'
basket
TE06-9021 900 2134 TE13-6021 600 2134
W D W D
Single
door& TE07-6020 600 2019 TE14-6020 600 2019
1 toast Refrigerator W/O back
16 L/R 600
H
9 oven& L/R 600 panel
H
cabinet D
1
microwave TE14-6021 600 2134
TE07-6021 600 2134
oven
D
W
H
oven& toast oven
10 L/R 600
H
H'/2
door& TE09-6020 600 2019 oven&
H'
1 toast 2 drawers TE16-9021 900 2134
oven&
11 L/R 600
H
1 W
D
H'/3
oven&
H'
W D 3 drawers TE17-9021 900 2134
TE10-3020 300 2019
D
Double W
High doors&
12 600 TE18-9020 900 2019
H
basket toast
oven&
20 600
H
TE10-3021 300 2134 microwave
oven&
double TE18-9021 900 2134
doors
W D
D
W
TE11-6020 600 2019 Double
doors& TE19-9020 900 2019
Refrigerator W/O toast
13 L/R 600
H
H
panel microwave
TE11-6021 600 2134 oven& TE19-9021 900 2134
1 drawer
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
D D
1 lift up W W
door& TT06-8020 800
TE20-9020 900 2019 Heavy- Matching
toast
22 oven&
600 duty door
28 TT06-10020 1000 600 2019
H
microwave
H
oven&
sliding fittings
double TE20-9021 900 2134 door
TT06-12020 1200 BM-BT04
doors
TK02-3020 300
W D D
Single TE21-6020 600 2019 W
H
2 drawers TE21-6021 600 2134 cabinet TK02-3021 300
TK02-5021 500
Double W
D
TE22-9020 900 2019
door& W
TY02-3020 300
D
toast
24 oven& 600 TY02-4020 400 620 2019
H
microwave
oven&
2 drawers TE22-9021 900 2134 Arch TY02-5020 500
30 open L/R R=300
H
cabinet TY02-3021 300
oven&
3 drawers TE23-9021 900 2134
D
W
TA01-12020 1200 2019
-Matching
Electromotion
D
door fittings
27 TT05-18020 1800 600 2019 WWY09
sliding door
H
-Thickened
back panel
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
WD01-3076 300 WD03-6038 600
WD01-3576 350 WD03-6538 650
D
Refridg W -W/O shelf
WD01-4076 400 W/ WD03-7038 700 -W/ vertical rail
305 762 erator and reinforce
WD01-4576 450 one shelf 3 WD03-8038 800 600 381
H
rod when
top W>900mm
WD01-5076 500 cabinet WD03-9038 900
WD01-6076 600 WD03-10038 1000
WD01-3091 300 WD03-12038 1200
WD01-3591 350 WD03-6045 600
Single WD01-4091 400 WD03-6545 650
1 L/R 305 914 W/ WD03-7045 700
door WD01-4591 450 two
shelves WD03-8045 800 600 457
WD01-5091 500
WD03-9045 900
WD01-6091 600 W
D WD03-10045 1000
Refridg -W/O shelf
WD01-3010 300 erator WD03-12045 1200 -W/ vertical rail
and reinforce
3
H
rod when
WD01-3510 350 top WD03-6053 600 W>900mm
-W/ two
shelves cabinet WD03-6553 650
WD01-4010 400
305 1067 -Thickened
WD01-4510 450 back panel
WD03-7053 700
WD03-8053 800 600 533
WD01-5010 500
WD03-9053 900
WD01-6010 600
WD03-10053 1000
WD02-6050 600 WD03-12053 1200
WD02-7050 700 -W/O shelf
WU01-6038 600
WD02-8050 800 305 500
-W/ vertical rail WU01-6538 650
and reinforce
rod when WU01-7038 700
WD02-9050 900 W>900mm
WU01-7538 750
WD02-10050 1000 WU01-8038 800
WD02-6076 600 WU01-8538 850
WU01-9038 900 305 381
WD02-7076 700 -W/O shelf
-W/ vertical rail WU01-9538 950
and reinforce
WD02-8076 800 305 762 rod when WU01-10038 1000
W>900mm
WD02-9076 900 WU01-10538 1050
WU01-11038 1100 -W/O shelf
WD02-10076 1000 -W/ vertical rail
Double WU01-11538 1150 and reinforce
2 WD02-6091 600 1 lift up WU01-12038 1200
rod when
doors 4
W>900mm
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
WU01-6060 600 WU05-6076 600
WU01-6560 650 WU05-7076 700
WU01-7060 700 WU05-8076 800 305 762 -W/ one
WU01-7560
WU05-9076 900 shelf when
750 H=762mm
D WU05-10076 1000 -W/ two
D WU01-8060 800 W shelves
W
-W/ one shelf WU05-6091 600 when H=914/
WU01-8560 850 -W/ vertical rail
and reinforce WU05-7091 700 1067mm
1 lift up WU01-9060 900 305 600 rod when 1 bifold -Back panel
4 W>900mm 8 WU05-8091 L/R 800 305 914 thickened
H
H
door WU01-9560
door when
950 WU05-9091 900 H=1067mm.
WU01-10060 1000 WU05-10091 1000 -Matching
door fitting
WU01-10560 1050 WU05-6010 600 BWWA0001
/BWWM0002
WU01-11060 1100 WU05-7010 700
WU01-11560 1150
WU05-8010 800 305 1067
WU05-9010 900
WU01-12060 1200
WU05-10010 1000
WU02-6076 600 WA01-6576 655
WU02-7076 700 WA01-7076 705
WU02-8076 800 WA01-7576 755
305 762 305 762
WU02-9076 900 WA01-8076 805
WU02-10076 1000 WA01-8576 855
Double WU02-12076 1200
W/ vertical rail
and reinforce WA01-9076 905 -W/one
shelf when
5 lift up rod when WA01-6591 655 H=762mm
WU02-6091 600 W>900mm
doors WA01-7091 705 -W/ two
WU02-7091 Single shelves
700 when H=914/
door WA01-7591 755
WU02-8091 800 9 L/R 305 914 1067mm
305 914 blind WA01-8091 805 -Back panel
WU02-9091 900 thickened
cabinet WA01-8591 855 when
WU02-10091 1000 WA01-9091 905 H=1067mm.
-Filler
WU02-12091 1200 WA01-6510 655 width=100mm
H
WU03-8045 800 600 457 door -Back panel
WA02-7276 762 thickened
WU03-9045 900 when
H=1067mm.
WU03-10045 1000 WA02-7291 725 725 914 -Matching
WU03-12045 1200 hinge BM-J14
door BM-SZ05
WU04-10076 1000
WU04-12076 1200
WB01-6076 762
W D
Double -W/one shelf
W D
doors / -Back panel
microwave thickened
Incircle D1
W1 -Door 16 WB01-6091 600 305 914
H
when
oven
H
R=300mm
13 corner WA05-6276 L/R 625 625 762 -Matching cabinet A
W=1067mm.
-Bottom panel
cabinet 175°hinge depth=380mm
WB01-6010 1067
W D
Double WB02-6076 762
WA06-11076 door /
1105
17 microwave 600 330
H
oven
305 762 cabinet B WB02-6091 914
WA06-12076 1205
-W/ one W D
shelf when
1 lift up
H=762mm door /
-W/ two
18 microwave WB03-6076 600 330 762
Double
H
WA06-11091 1105 shelves
oven
door when
H=914/ cabinet
14 blind L/R 305 914 1067mm
-Back panel
cabinet WA06-12091 1205 thickened D WT04-8076 800
when W
H=1067mm
Easy WT04-9076 900 Matching
-Filler
width=100mm 19 sliding WT04-10076 1000 325 762 door fittings
H
door WT04-11076 1100 BM-BT02
WA06-11010 1105
WT04-12076 1200
305 1067 D
W
Double WE01-6076 600
WA06-12010 1205 doors/
20 330 762
H
basket
WA07-8538 855 cabinet WE01-9076 900
1 lift up WA07-9038 905 D
Bifold W
door -W/O shelf
lift up WE02-6076 600
15 WA07-9538 L/R 955 305 381 -Filler
corner width=100mm door/
H
21 basket
330 762
cabinet WA07-10038 1005
wall WE02-9076 900
WA07-10538 1055 cabinet
Door
Cabinet Size(mm) Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes No Cabinet Picture Code Direction Structure Notes
W D H W D H
W D
W
D WT01-6013 600
WT01-7013 700
H
WY01-3076 300 330 762 R=300
Arch WT01-8013 800 305 1334
H
door WT01-9013 900
22 D L/R
wall W
H
D W
WY02-3076 300
L/R 325 762 R=300
H
WT02-9013 900
WY02-4076 400
Arch
open D
23 W W WT06-8013 800
cabinet
D
WY02-3091 300
914
WY02-4091 400 Easy Matching
L/R 325 R=300 sliding door
H
H
1067 door BM-BT02
WY02-4010 400
W
D WT06-10013 1000
WK03-3076 300
H
BM-JL02
WK03-4010 400 325 1067 WT07-8990 900
door
WK03-5010 500 WT07-8910 1000
WT07-8911 895 1100
WT07-8912 1200
WT07-8913 1300
WT08-5090 900
W D WT08-5010 1000
500
WT08-5011 1100 -Back panel
thickened
Plastic WT08-5012 1200 -Matching
4 rolling 350 door fitting
H
WT08-6090 900 BM-JL01
door
WT08-6010 1000
600
WT08-6011 1100
WT08-6012 1200
Door
Cabinet Size(mm)
No Cabinet Picture Code Direction Structure Notes
W D H
WT09-5090 900
W D WT09-5010 1000
500
WT09-5011 1100
-Back panel
Transparent WT09-5012 1200 thickened
5 acrylic 350 -Matching
H
W D
WT11-4513 450
WT12-5513 550
Page 122