Professional Documents
Culture Documents
Scotgrip® Footsure stair nosings incorporate the unique Scotgrip® high-traction anti-slip safety
surface which gives a sound foot-holding in the most extreme conditions. These tough and
durable products are manufactured under BS EN IS0 9001:2008 quality controlled conditions
comprising of a reinforced composite base and a graded aggregate surface. As a Scotgrip®
quality standard, these products are fire rated, spark and friction tested.
The leading edge of a step is the most dangerous part, • Eliminates ‘Slips and Trips’
especially if it has been damaged, worn smooth or • Cost effective
rounded by constant use. By installing Scotgrip Footsure ®
• High traction anti-slip safety products
stair nosings not only is this slip hazard eliminated but • Tough and durable
the lifespan of the step is greatly increased. These heavy • Standard sizes and custom made
duty products are easily fitted onto open grating/grille, • Fully guaranteed
chequered plate, concrete or wood. • Fire rated, spark and friction tested
• Non corrosive
FQM
Facilitators Quality Management
Fitting DATA Surface grades: High Profile – 6mm aggregate (1/4” approx.)
Low Profile – 3mm aggregate (1/8” approx.)
Fitting onto: Method Fine Profile – 1mm aggregate (1/16” approx.)
Open grating/grille Type ‘S’ fixings
(saddle assemblies) Highly visible
Chequered plate Self tap screws or nut, Colour coded in a wide range of colour schemes to suit individual locations.
bolt and washer Colour codes are: safety yellow, black/safety yellow, black,
Concrete HPS impact fixings green, grey, blue, red, white.
Wood screws or adhesive fluorescent and photoluminescent finishes
Other colours available – please ask.
Ease of installation
Scotgrip® Footsure stair nosings are designed for quick and secure fitting, either by
mechanical fixings or bonding to existing surfaces. These products are pre-drilled
where required for quick installation. Scotgrip® products are non-load bearing and
must have a suitable underlying structure to be secured to.
We recommend our own fastening systems for securing
Scotgrip® products.
Quality – it’s what dRIves us
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 quality
STANDARD SIZES controlled conditions using highly compatible raw materials at our premises
in Banchory, UK.
BREADTH (DEPTH)
mm 40 80 100 130 160 200 260 FURTHER SCOTGRIP ® PRODUCTS
inches 1 /2
1
3 4 5 6 8 10 If you would like to view the full Scotgrip® anti-slip safety product range that we
450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔ manufacture, please look at our website: www.scotgrip.com where you will find all
Length
Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300,
Houston, Texas 77042, USA
Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) Limited
Scotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
e-mail: info@scotgrip.com website: www.scotgrip.com
anti-slip safety products as part of a continuous programme of improvement and innovation. Registered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)
Stairways - FSN Footsure Ref: SCGR Footsure Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2