Professional Documents
Culture Documents
& TECH
BHILAI, KAILASH NAGAR, INDUSTRIAL ESTATE P.O., BHILAI-490 026 Phone. No: 0788- 2286662/3/4
Fax No: 0788-2285266 www.ccetbhilai.ac.in
Mail us: ccet@ccetbhilai.ac.in
Newsletter
Mechanical Engineering Department
0
CHRISTIAN COLLEGE OF ENGINEERING & TECHNOLOGY, BHILAI SEPT
2016
DEPARTMENT OF MECHANICAL ENGINEERING
VISION
inculcating high moral & social values with a human face and thereby producing
society.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
CHRISTIAN COLLEGE OF ENGG.& TECH
BHILAI, KAILASH NAGAR, INDUSTRIAL ESTATE P.O., BHILAI-490 026
Phone. No: 0788- 2286662/3/4 Fax No: 0788-2285266 www.ccetbhilai.ac.in
Mail us : ccet@ccetbhilai.ac.in
MISSION
Run accredited graduate and postgraduate programme.
education facilities.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
CHRISTIAN COLLEGE OF ENGG.& TECH
BHILAI, KAILASH NAGAR, INDUSTRIAL ESTATE P.O., BHILAI-490 026
Phone. No: 0788- 2286662/3/4 Fax No: 0788-2285266 www.ccetbhilai.ac.in
Mail us : hod.mech.ccetb@gmail.com
VISION
The vision of Department of Mechanical Engineering is to advance the well-
being of the society through excellence in teaching, research and service that
exploits the rapidly changing technical diversity of mechanical engineering. We
achieve this with collaborative environments that stimulate faculty, staff and
students to reach their highest potential through life long-learning.
MISSION
The mission of the Department of Mechanical Engineering is
1. To create knowledge through teaching &research in Science and Technology
of Mechanical Engineering.
2. To share knowledge through educational programs and develop the
professional potential of faculty, staff and students.
3. To maintain vital, state-of-the-art research facilities and provide the students
and faculty with opportunities to create, interpret, apply and disseminate
knowledge.
4. To advance and spread knowledge in the areas of science & technology
leading to creation of wealth and welfare of humanity.
5. To be a preferred destination for higher learning that will serve as a source
of knowledge and expertise for the society.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
2016
DEPARTMENT OF MECHANICAL ENGINEERING
PROGRAM OUTCOMES(POS)
The Program Education Objectives (PEOs) of the department will develop the
students with following outcomes,
1. To apply knowledge of mathematics, basic sciencesand engineering
applicable to the fields of Mechanical Engineering.
10. Toexcel in the field of Mechanical Engineering through higher studies and
research.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
RESEARCH PROPOSAL ACCEPTED
2016
DEPARTMENT OF MECHANICAL ENGINEERING
INDUSTRIAL VISIT
Industrial visit was organized for M. Tech first year and B.E. final year of mechanical
engineering students of CCET Bhilai in ‘Ferro Alloys Private Limited, Hathkhoj, Industrial
Area, Bhilai’on 2-Sept-2016.
In this visit students have gained the practical knowledge of fabrication techniques of heavy steel
structure and procedures of non-destructive testing methods including die penetration testing and
ultrasonic testing.
Mr. Mayank Bansal, Managing Director of the company has welcomed the students and given
the brief introduction about the company.
Mr. Mahesh Pandey, Quality Head, has transformed knowledge about the automatic welding
machine and its application in the industry to the students.
Mr. BhagatsinhVerma, Design & CNC Head has taught the detailed working procedure of
Computer Numerically Controlled (CNC) Machines to M. Tech students.
Mr. Sheetal Dewangan& Miss Pallavi Chandrakar has accompanied the students.
Dr. Jayakumar Jayaraman, HOD Mechanical, Dr. Mrs Dipali Soren, Fr. Jose K Varghese,
Executive Vice Chairman has appreciated this visit.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
Industrial visit was organized for Third year of mechanical engineering students of CCET Bhilai
in ‘Wagon repair shop Charoda, Bhilai’on 27 & 28-sept-2106.
During the visit, students get information of loco maintenance, overhauling and various
mechanical, electrical, electronics testing process in detailed.
Mr. Rajesh Srivastava, in charge of training has welcomed the students and given the brief
introduction about the maintenance division.
Mr. Prem Sagar Naik, Amit Singh Dhakad, Manmohan Soni and Abhijit Kuthe have
accompanied the students during these two day visit.
Dr. Jayakumar Jayaraman, HOD Mechanical, Dr. Mrs Dipali Soren, Fr. Jose K Varghese,
Executive Vice Chairman has appreciated this visit.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
GUEST LECTURE
“Lookout on Automotives Trends and SAE India”By Apuroop Rao, SAE Member, MTech
IIT Kharagpur dated 08-09-2016 , Time
:12.00 P.M.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
Departmental Guest Lecture Activity on the occasion of Engineer’s Day on “Decision
Making and Optimizing Goals” by: By JC Hrishikesh Prasad, Assistant Manager, working as
Departmental Safety Officer & Training Engineer in Wire Rod Mill in Bhilai Steel Plant, 16-09-
2016, Time: 1.40 P.M.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
also suggested students to emphasis on their positive skills whatever the qualities they are having
present it with confidently don’t think for which they don’t have. He has also given example that
only 18-20% people are rich and rest are living nominal life, because that lowest percentage
people knows how to mold every possible opportunities as in favor of them, so he suggest
opportunities come for everyone so always be ready to turn up it. In his conclusion he told one
should be always confident, bold, positive thinker with right attitude.
Dr. Jayakumar Jayaraman felicitated Mr. JC Hrishikesh Prasad in the presence of all
faculties, technical assistants and students of the department of mechanical engineering.
Mr.Ankur Malviya & Ms. Pallavi Chandrakar have coordinated the event. The Executive Vice
Chairman of CCET, Fr Jose K Varghese and the Principal Dr.Dipali Soren congratulated
Mechanical department for the successful organization of the guest lecture and extended their
support and well wishes to the students.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
SHORT TERM COURSE ATTENDED
The short term course on “Optimization Methods In Engineering Design” attend by me date on
29-30 th September 2016 was conducted by department of mechanical engineering NIT Rourkela
sponsored by Teacher Education Quality
Improvement Program (TEQIP-2)..The
lectures were delivered by Dr Saroj Kumar
Patel & Dr. Sourav Dutta, Associate
Professor & Dr.Siba Shankar Mahapatra,
HOD , department of mechanical
engineering, NIT, Rourkela. There were 35
professors has participated from all over
the India of various educational
institutions.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
SPOKEN TUTORIAL CLASSES
It is good to
hear that our college now in collaboration
with IIT Bombay for delivering various
classes as in the name of “Spoken
Tutorials” .It is free of cost course. From
mechnical department Mr Ankur Malviya
,is coordinator for this course. In this
course , through video tutorials they can be
able to learn diefferent courses including
softwares ,the courses such as :SciLab,
Latex ,Firefox, open FOAM, Libre Office,
etc. After it the students has to appear for
online exam which will conducted by IIT
bombay. The qualified students will get
certificates from IIT Bombay. The classes
has successfully conducted for 2nd year
,3rd & 4th years students during the month
of september. This classes were conducted
in CAD lab & Mechanical Auditorium.
Students can do revision of these tutorials
in CAD lab itself during lab hours or in
lunch time with proper permission in
Incharges. The online test for this Spoken
Tutorial is scheduled just after the Class
Test 2 for all our mechanical students.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
TECHNOCLUB ACTIVITY
2016
DEPARTMENT OF MECHANICAL ENGINEERING
There will be a “Technical Model Exhibition” program dated on 30-09-2016 during last
lecture , in which 11 teams has participated from various disciplines and standards.Most of the
models are new in our college campus there were 3 members in a group .Out of 11 teams 3
models has selected .The exhibition were judged by Dr Jayakumar Jayaraman , HOD , Dr Mukul
Shrivastav ,Associate Professor , Department of mechanical engineering, CCET Bhilai& Mr.
Sumit Sharma , Assistant Professor, Department of Mechanical Engineering, CIMT Bhilai. The
selected models will be forwarded to University model competition at Rungta during October
2016.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
CLEBRATION
We have organized teachers day program with help of Miss Pallavi Chandrakar
.The students of 7th sem were the coordinators of the events, Mr Joushua John ,7th A, Mr.
Abhilash 7th B ,Mr. Gagandeep 5th B have well coordinated the event with their team. In this
event lightning of lamp,cakecutting ceremony,games for faculties & songs by students followed
by love feast had conducted.
According to Hindu mythology Lord Vishwakarma is the builder of all the gods’ palaces, and
the designer of all celestial vehicles and weapons. Occasion was attended by principal Prof (Dr)
DeepaliSoren, Head of mechanical department Dr Jaykumar Jayraman, , Head of department of
all branch , and all faculty and staff members including students.
2016
DEPARTMENT OF MECHANICAL ENGINEERING
“BIRTHDAY CELEBRATION”
Birthdays are usually the occasions for rejoicing and feasting. All faculty member gather on staff
room for celebrating Dr. Mukul Shrivastava’s birthday. Mr. Manmohan Soni made all
arrangement for celebration. The time of the function was 4:10 pm in the evening. All faculty
members wished him a very happy birthday. Faculties were served sweets and cold drinks.
Everybody was in a joyful mood and enjoyed a lot.
Prepared By
PremSagarNaik
Assistant Professor
Mechanical Engineering
Published by
Department of Mechanical Engineering
CCET, Bhilai.