Professional Documents
Culture Documents
<20 20-40 mm
mm
IS 2062/ 1999 A 0.23 1.50 0.050 0.050 0.40 0.42 250 240
Mode of deoxidation - Grade A: Killed or semi-Killed, Grade B & C: Charpy Impact energ
Killed. Cu between 0.2 and 0.35% for Copper bearing quality. 00 C, if agreed. The im
three temperatures 0
Fe 440 0.20 1.30 0.040 0.040 0.45 0.40 300 290 280
Fe 440 B 0.20 1.30 0.040 0.040 0.45 0.40 300 290 280
Fe 490 0.20 1.50 0.040 0.040 0.45 0.42 350 330 320
Fe 490 B 0.20 1.50 0.040 0.040 0.45 0.42 350 330 320
Fe 540 0.20 1.60 0.040 0.040 0.45 0.44 410 390 380
Fe 540 B 0.20 1.60 0.040 0.040 0.45 0.44 410 390 380
Fe 570 0.22 1.60 0.040 0.040 0.45 0.46 450 430 420
Fe 570 B 0.22 1.60 0.040 0.040 0.45 0.46 450 430 420
Fe 590 0.22 1.80 0.040 0.040 0.45 0.48 450 430 420
Fe 590 B 0.22 1.80 0.040 0.040 0.45 0.48 450 430 420
Micro alloying elements like Nb, V, Ti or B shall be added singly or in Charpy Impact energ
combination and total micro alloying elements shall not be more than -200 C for Fe 490B & F
0.25% RT= Room Temperatu
Nb + V + Ti = 0.20% max
� 16 >16�40
DIN 17100 ST 52.3 0.20-0.22 1.6 0 0.040 0.040 0.55 355 345
�16 >16 �
mm 40
IS 2002/ 1992 1 0.18 0.50- 0.035 0.040 0.15- 0.44 235 225
1.20 0.35
Al 0.02% max
Al 0.02 min * For grade 60 for thickness 12.5 mm and below Charpy Impact energ
Mn % 0.60-0.90, for thickness >12mm Mn % 0.85-1.20 - 46 o C for � 25 mm;
at - 40 o C for > 25 �
Al 0.02 min, Cr 0.25 max, Ni 0.25 max, Cu 0.35 max, Mo 0.08 max
Micro alloyed with Nb/V if required �16 mm >16-40
mm
Al 0.02 %min, Cr 0.25% max, Ni 0.30% max, Cu 0.30% max, Charpy Impact energ
Nb 0.01% max, V 0.03% max , Ti 0.03% max, Mo 0.10% max
For ASTM-A-588M/ 28
Bend Test is a supple
< 25 mm >25
<50mm
* Mn content not less than 2.5 times Carbon content if thickness> 12.5mm.
** Si 0.10-0.35% if killed quality, otherwise up to 12.5 mm thickness.
*** Al min 0.01%
* Al min 0.015%
mm
for 8 to 10 >20 to >3
YS & <10 to �32 to
UTS �2 �4
0
GOST 19282 09G2S 0.12 1.3-1.7 0.035 0.040 0.5- 490 470 460 45
0.8
Al 0.050 max, Cr 0.30 max, Ni 0.30 max, Cu 0.30 max, Ti 0.03 max, Elong 21, Bend Test
N 0.008 max Impact for category 3
Al 0.01 min
Cu 0.20-0.25
BSK-46 0.10 1.00 0.025 0.025 0.03 460
max