Professional Documents
Culture Documents
G ®
Steel Belt Protection
The GreCon mat scanner DIEFFENSOR precisely differ- Using DIEFFENSOR, the steel belts of a press can be
entiates between harmless small foreign bodies and those effectively protected against permanent damage by high
which may damage the steel belt. DIEFFENSOR recognises density non-metallic foreign bodies.
metallic and non-metallic foreign bodies of high density
located in fibre, chip or OSB mats, such as glue lumps,
super-dense fibre lumps, it even detects plastic or alu-
minium articles which cannot be recognised with standard
metal detectors or magnets. Foreign bodies may cause 1 Weight per unit area
irreversible damage to the steel belts of a continuous press, 2 Mat width
especially when thin panels are produced. DIEFFENSOR 3 Mat length
recognises the shape and mass of foreign bodies, stores 4 Foreign bodies
3D pictures and trends for later evaluation. 5 Feed direction forming line
4
3
1 Roller bars
2 Deformed steel belt caused by super-dense foreign bodies
3 Fibre mat
2
Weight Per Unit Area and Material Distribution
DIEFFENSOR determines, with high resolution and over The recorded measured data makes it possible to easily
the entire mat width, the weight per unit area as well as the trace production processes and to log them.
material distribution of the fibre, chip or OSB mat.
1 4
3
Measuring Principle Network Connections
4
Software
The visualisation software of all GreCon measuring sys- History Data Base
tems is based on Windows. DIEFFENSOR’s software
consists of the following program modules:
5
Technical Specifications
■ Particleboard
■ MDF board
■ HDF board
■ OSB
■ Mineral wool
■ Insulating board
■ Machined car partsHardware Advantages
■ Solid aluminium frame
■ non-contact measurement
■ Little installation space
Hardware Advantages
6
Customer Advantages Applications
■ Longer life of the steel belts For MDF, particleboard and OSB production, DIEFFENSOR
■ Complete picture of the spreading quality is installed prior to the main press.
■ Investment in usual metal detection systems
is not necessary An additional application is measurement of boards that
■ Investment in traversing weight per unit area are ready pressed. This is particularly interesting when a
gauge is not necessary measurement of the material distribution prior to the press
■ Improved product quality is impossible or when further information is required.
■ Quick return on invest
7
G
Subject to technical and country-specific modifications. | © 2005 GreCon | EN »ENGLISH« | 05.2005 | M. Reiss
GreCon
P.O.BOX 1243
D-31042 ALFELD/HANNOVER
GERMANY