Professional Documents
Culture Documents
© Neurosynaptic Communications Pvt Ltd. All rights are reserved. Reproduction of this publication in
whole or in part is prohibited without prior written consent of Neurosynaptic Communications Pvt Ltd
Neurosynaptic Communications Pvt Ltd reserves the right to make changes to this publication at any
time without notice or obligation and will not be liable for any consequences resulting from the use of
this publication.
Actual products may look different from the pictures shown in this publication.
Thermometer
The IR Thermometer Diagnostic Device measures body temperature.
Instructions
Insert the temperature probe cover on to the device as shown in Figure 2.
Switch ON the device by pressing the blue button on the device.
Gently insert the probe into the ear canal until a slight resistance is felt.
Place the Thermometer in such a way that its tip is pointing straight at patient’s
eardrum as shown in Figure 3. User may have to adjust for ear canals which are a
little bent, so the sensor is aimed at the ear drum.
Select Thermometer option from the ReMeDi Nova iCARE application.
Device will make a beep sound. Hold the Thermometer steadily in the same position.
Device starts recording the temperature which is displayed on the device and in the
application as shown in Figure 4.
Thermometer will beep again, and the result will be shown on the display.
Once the reading has completed in the Android application, click on Save button in
the App to send the data back to the calling application or Discard to discard the
reading. If the App is being used in stand-alone mode, clicking on either button
discards the reading.
Device will switch OFF automatically.
Gently remove the device from the ear canal.
Pulse Oximeter
Pulse Oximeter is a small, lightweight device that painlessly attaches to the fingertip to
monitor the amount of oxygen carried in the body. An oxygen saturation level of greater
than 95% is generally considered to be healthy. In addition to oxygen saturation level, pulse
rate is also displayed. Normal pulse rate values for adults is in the range of 60-80 beats per
minute. Heart rate can be expected to increase a little with exercise and oxygen saturation
may slightly vary.
Instructions
Attach the sensor to the patient’s finger as shown in Figure 5
Switch ON the device by pressing the blue button.
Select Pulse Oximeter option from the ReMeDi Nova iCARE Android App.
Note
ReMeDi NOVA android application is required to use this Device.
Please make sure the device is charged before using. If battery is low, red light will
glow on the device when it is switched ON.
Note
ReMeDi NOVA android application is required to use this Device.
Please make sure the device is charged before using. If battery is low, red light will
glow on the device when the device is switched ON.
Electrocardiogram
Electrocardiography (ECG) is the process of recording the electrical activity of the heart over
a period using electrodes placed on the skin. These electrodes detect the tiny electrical
changes on the skin that arise from the heart muscle's electrophysiologic pattern of
depolarizing and re polarizing during each heartbeat. It is a very commonly performed
cardiology test.
To start the Electrocardiogram (ECG) reading, connect the chest and limb leads to the
patients in the position as shown in Figure 10 and Figure 11.
Instructions
Attach the ECG probe in to the Sensor as shown in Figure 9.
Carefully apply the Electrodes to the patient after applying Conductive Gel if
reusable electrodes are being used. If disposable electrodes are being used, they
Note
ReMeDi Nova iCARE Android App is required to use this device.
If the Leads are not connected properly, the Diagnostic system could lose the signal
from the patient for the respective lead.
Please make sure the device is charged before using. If battery is low, red light will
glow on the device when the device is switched ON.
Stethoscope
The stethoscope is an acoustic medical device for auscultation, or listening to the internal
sounds of an animal or human body.
Instructions
Connect the Splitter to audio port of the mobile device/Laptop.
One end of the Aux cable needs to be connected to mic-port in the splitter and other
end to the Stethoscope.
Insert the earphone jack in the speaker-port in the splitter.
Switch ON the device by pressing the blue button.
Select Stethoscope option from the ReMeDi Nova iCARE Android App.
Auscultation sounds will be heard through earphone and the same will be recorded
in the application.
Note
ReMeDi Nova iCARE Android App is required to use this device.
Please make sure the device is charged before using. If battery is low, red light will
glow on the device when the device is switched ON.
Spirometer
A Spirometer is an apparatus for measuring the volume of air inspired and expired by the
lungs. A Spirometer measures ventilation, the movement of air into and out of the lungs.
The Spirometer will identify two different types of abnormal ventilation patterns,
obstructive and restrictive.
Instructions
Connect mouthpiece to one end of the filter and the other end of the filter needs to
be attached to the Spirometer.
Switch ON the device by pressing the blue button.
Select Spirometer option from the ReMeDi Nova iCARE Android App.
Wait for 2 seconds and start blowing air as mentioned in next steps.
o Normal inhale
o Normal exhale
o Normal inhale
o Deep inhale
o Deep exhale
o Deep inhale.
Graph and the result is displayed on the mobile device as shown in Figure 15.
Once the reading has completed in the Android application, click on Save button in
the App to send the data back to the calling application or Discard to discard the
Note
ReMeDi Nova iCARE Android App is required to use this device.
Please make sure the device is charged before using. If battery is low, red light will
glow on the device when the device is switched ON.
Optical Reader
Instructions
Connect the micro-USB end of the OTG cable to the Mobile device and the other end
need to be connected to the Optical reader with the USB cable.
Select Optical Reader under Blood test option from the ReMeDi Nova iCARE Android
App.
Select the test to be performed and insert the respective test card inside the slide
appropriately and close it
Note
ReMeDi Nova iCARE Android App is required to use this device.
Please make sure the device is charged before using. If battery is low, red light will
glow on the device when the device is switched ON.
Instructions
Connect device to mobile through OTG connector and USB cable.
Select Hemoglobinometer option under blood test from the ReMeDi iASSIST
Android App.
Click on scan at the right top corner of the mobile screen and it detects the device.
Click on TEST and enter the strip batch code mentioned on the strip box and click on
TEST.
After clicking on TEST, device asks to insert the strip. Upon inserting the strip, blood
drop need to be put on the white portion of the strip.
Timer starts on the device and displays the result on the device and mobile after a
few seconds.
Once the result is displayed in the Android application, click on Save button in the
App to send the data back to the calling application or Discard to discard the result.
If the App is being used in stand-alone mode, clicking on either button discards the
reading.
Note
ReMeDi iASSIST Android App is required to use this device.
Please make sure the device is charged before using.
Make sure the strips are within date of expiry.
Instructions
Insert the code chip (Ex: 001) present with the strips box as shown in figure 21(a).
Insert the lipid strip into the “Lipid Test Strip Slot” of the device. When the lipid strip
reaches the correct position, you will hear a beep sound. Device automatically asks
to open the Measurement Chamber Flap with second beep as shown in the figure
21(b) & 21 (c).
Open the Measurement Chamber Flap. The flap firmly locks into place when it
reaches a vertical position.
Follow Capillary Whole Blood procedure to extract the blood Page 19.
Apply the collected sample to the application area of the test strip carefully by
pressing the head of SD Ezi Tube as show in Figure 23
Close the Measurement Chamber Flap and wait for the result. Once the result
displays connect the device the Mobile through OTG and USB cable.
Instructions
Remove a new glucose test strip from container. Be sure to tightly replace container
cap after removing glucose test strip.
Insert a glucose test strip into the 'Glucose Test Strip Slot' of the Analyzer. The
Analyzer will automatically enter the glucose testing mode regardless of inserting a
code chip. as shown in the Figure 25(a).
Be ready with the blood sample on the finger by using a lancing device.
(a) (b)
Figure 25: Blood Glucose Test
Fetal Doppler
A Doppler Fetal Monitor is a hand-held ultrasound transducer used to detect the fetal
heartbeat for prenatal care. It uses the Doppler effect to provide an audible simulation of
the heartbeat. Some models also display the heart rate in beats per minute (BPM). Use of
this monitor is sometimes known as Doppler Auscultation. The Doppler Fetal Monitor is
commonly referred to simply as a Doppler or Fetal Doppler.
Instructions
Switch ON the Fetal Doppler device by pressing the power button present in the side
of the device.
Note
ReMeDi iASSIST Android App is required to use this device.
Please make sure the device is charged properly before using. If the device is not
charged, it may not function properly.