Professional Documents
Culture Documents
Application:
The GPE relife vent is designed to relive pressure
on atmospheric aboveground storage tanks, and is
ideally suited as a low cost rim vent on floating roof
tanks.
All types of rim vent are available with flanged
connection specifications. Features and Benefits:
All valves must be carefully maintained by a The standard body and cover materials are
qualified valve technician. They should only be aluminum and carbon steel.
assembled under clean conditions, preferably in a All sizes have rust protected aluminum or stainless
service shop environment. steel hoods.
The standard seats and pallets are stainless steel
with PTFE “Teflon” cushion seated diaphragm
on each pallet, these diaphragms have a high
resistance to ice or gum formation.
Above Specification may vary upon customer
requests.
Persian GPE 40
Pressure Relief Valve (Rim Vent)
Spring Loaded Type
Application:
The GPE pressure relief valve is designed to relive
internal over pressure above working criteria.
The spring-loaded design allows for higher
pressure settings than the standard dead-weight
loaded valves used in tanks with higher maximum Features and Benefits:
allowable working pressure. The standard body and cover materials are
Spring-loaded relief valve are available with flanged aluminum and carbon steel.
connection specifications. All sizes have rust protected aluminum or stainless
The range setting pressure is from 500 to 1720 mm steel hoods.
of water. The standard seats and pallets are stainless steel
with PTFE “Teflon” cushion seated diaphragm
on each pallet, these diaphragms have a high
resistance to ice or gum formation.
Above Specification may vary upon customer
requests.
All valves must be carefully maintained by a
qualified valve technician. They should only be
assembled under clean conditions, preferably in a
service shop environment.
41 Persian GPE
Pressure & Vacuum Breather Valve
Weight Loaded Type
Persian GPE 42
Pressure & Vacuum Breather Valve
Spring Loaded Type
43 Persian GPE
P&V Valve and Rim Vent Data Sheet
Pleaase kindly fill the below form to Persian GPE for providing Technical Proposal:
A GENERAL D GENERAL
A.6 Valve type(Rim Vent/ P&V Valve) E.2 Required Venting Capacity(Outbreathing)Nm3/h
B.3 Spring Material (for Spring Loaded Type) F.1 NACE Requirement
Weight Loaded P&V Valve Spring Loaded P&V Valve Weight Loaded Rim Vent Spring Loaded Rim Vent
Persian GPE 44
Spring Loaded
Pressure Relief
Valve
45 Persian GPE
Emergency Vent • Model No. 3800
Persian GPE 46
Emergency Vent • Model No. 3850
Application:
GPE emergency vents are used on fixed
roof storage tanks to prevent structural
damage due to excess internal pressure.
Storage tanks are pressurized when fluid is
pumped in, compressing the existing vapor
or when increasing temperature causes
increased evaporation or expansion of
existing vapor. To prevent damage, vapor
must be allowed to escape or enter the
tank at a specified pressure condition.
The volume rate of venting depends
upon the tank size, volatility of the
contents, the pumping rate and
the temperature. See API Standard
2000 for the procedures to determine
venting requirements.
The Spring Loaded Emergency Relief Valve
provides pressure relief. Emergency pressure
relief provides protection for fire exposure and/
or failure of the inert gas blanketing system. The
valves can be set for pressure relief in the range of
2500 - 500 mm. W.G.
High operating pressures reduce evaporation and Features and Benefits:
total venting volume, thereby reducing product loss Fast Inspection, Easy Maintenance. Design and light
and the cost of processing emissions. weight of unit permit easy, convenient handling for
All valves must be carefully maintained by a inspection and maintenance.
qualified valve technician. They should only be Full open flow capacity and automatic reclosing
assembled under clean conditions, preferably in of the vent as tank pressure decreases provide
a service shop environment. Carefully read and efficient and dependable emergency venting
understand this manual before attempting to repair capability while minimizing amount of vapor
a Emergency Pressure Relief Valve. unnecessarily vented to the atmosphere.
47 Persian GPE
Emergency Vent Data Sheet
Persian GPE 48
Flame Arrester
End Line and In Line Type
49 Persian GPE
Flame Arrester Data Sheet
Persian GPE 50