Professional Documents
Culture Documents
E-mail: Sebas888cona@gmail.com
Resumen
En el laboratorio de física se analizó experimentalmente los temas de momento de inercia y aceleración angular, de
manera que las actividades realizadas se fundamentaron para poder determinar dos puntos importantes. Primeramente para
analizar el movimiento circular uniforme variado se determina las ecuaciones del ángulo, la rapidez angular y aceleración
angular en función del tiempo. Para esto se utilizó un disco conectado a una polea con diámetro variable, a la vez esta se
conectó a la barrera fotoeléctrica contadora para poder observar los datos de aceleración angular, velocidad angular, el
ángulo y todos estos factores en un determinado tiempo. En segundo lugar con los datos obtenidos y las características del
disco se procedió a obtener el momento inercial del disco.
Abstract
In the physics laboratory, the subjects of moment of inertia and angular acceleration were analyzed experimentally, so that
the activities carried out were based in order to determine two important points. First, to analyze the uniform circular
motion, the equations of the angle, angular speed and angular acceleration as a function of time are determined. For this, a
disk connected to a pulley with variable diameter was used, at the same time this was connected to the photoelectric
counter to observe the data of angular acceleration, angular velocity, angle and all these factors in a certain time. Second,
with the data obtained and the characteristics of the disc, the inertial moment of the disc was obtained.
Ilustraciones:
Figura 2: gráfica aceleración angular - tiempo (α-t) Figura 7: Soporte del disco
Figura 8: Barrera fotoeléctrica contadora Figura 12: computadora
Instrucciones o procedimiento:
Anexo: 9 Anexo: 10
Anexo: 7 Anexo: 10