Professional Documents
Culture Documents
C
CI‐RPV ROTAR
RY PLUG VALV
VE S‐PELLEET FEEDER
Availablee in sizes 8”‐16” Avaailable in sizees 6”‐14”
Dust tighht rapid actingg Non‐jamming deesign
Availablee with air Rou und or squaree
operated d or manual oor inleet/outlet flanges
electric aactuator Staandard inspecction
Round orr square doo or
inlet/outtlet flanges Side inlet with
Clam stylle rotor adjjustable flow control gate
Elevated temperature e to 500 deg FF Avaailable in castt iron or stain
nless steel
connstruction
QUICK CLEAN ROTARY VALVE QUICK CLEAN ON RAIILS ROTARY VALVE
A
Availablee in sizes 6”‐16” Quick Clean end dplate
Square or round & rrotor removable
inlet/outtlet flange witthout tools
Endplatee and rotor forr cleaning on
removal without toolss slid
de rail systemm
for quick clean service e Avaailable for
Availablee in cast iron o
or stainless stteel CI//MD/DR‐S/Pellet Feeder
Same opttions availablle as CI/MD R Rotary Valve Vallves
Adjjustable tip ooptions
GRAVITY DIVERRTER VALVE DOUBLEE FLAP VALVE
Availablee in 7 sizes Avaailable in 3 sizzes
Square or round inlet//outlet Squuare or round d inlet/outlet flanges
flanges Preessure differeential rated
45 & 60 ddegree outletts forr 30” WG
Bottom aaccess door Pneeumatic or geearmotor opeeration
Pneumattically operate ed Cap pacity Dutchmman with
Fabricateed mild steel, inspection doorr
stainless,, or aluminumm construction Avaailable in gravvity
2 or 3‐waay diverters couunterweight d design
MAINTENANCEE SLIDE GATES CDC CI ROTARY VALVVE
Availablee in 10 sizes Avaailable in 4 sizzes
Square or round flangge available Suiited for 15 PSSI
Manual h hand crank orr pneumatic Avaailable in castt iron
operatorr or sstainless steeel
¼” thk 3004 SS blade Rouund inlet/outtlet
Bolted reeplaceable UH HMW guides flan
nges
Housing vent po ort
opttion
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.acsvalves.com
CI Series Rotary
Airlock Valve
Drop-Thru
Feeder/ Airlock
• Unique shaft seal design • Rotor options: closed end, metering style,
shallow pocket, adjustable tips, teflon coated
• Pressure differentials up to 15 psig
• Adjustable rotor tips available in EPDM,
• Square flanges hardened steel, stainless steel, bronze,
polyurethane
• High temperature options up to 750 F
• Interior coating options: hard chrome, tungsten,
• Available in cast iron, 304 SS and 316 SS and teflon
• Standard 8-vane rotor design comes complete • Shaft seal and rotor pocket air purge
with beveled tips and sides, option 6-vane
available • Special drive packages
PLAN VIEW
ELEVATION ELEVATION
ITEM A B C D E F G H I J K
6X6 10 5 8 3/16 1/2 22 9/16 16 3/16 5 1/2 13 11/16 6 4 3/4 N/A
8X8 10 1/2 5 1/4 8 5/16 1/2 24 13/16 17 6 15 1/16 8 3 1/2 4
10 X 10 12 3/4 6 3/8 9 9/16 1/2 26 5/16 20 15/16 7 5/8 15 9/16 10 4 1/2 4 1/2
12 X 12 15 1/2 7 3/4 11 5/8 1/2 29 9/16 23 13/16 8 1/2 17 7/16 12 5 1/4 5 1/4
14 X 14 19 9 1/2 13 3/8 1/2 31 1/4 24 9 17 3/4 14 5 1/2 5 1/2
16 X 16 19 1/2 9 3/4 13 3/4 1/2 34 7/16 26 3/16 10 18 15/16 15 6 1/8 6 1/4
18 X 18 26 13 17 5/8 3/4 41 1/4 23 3/4 12 18 18 5 3/8 5 3/8
22 X 22 30 15 20 7/8 3/4 45 5/8 29 3/4 14 3/16 26 1/8 22 6 1/2 6 1/2
24 X 24 32 1/2 16 1/4 22 1/8 3/4 47 1/8 29 3/4 16 26 5/8 24 6 6
26 X 26 36 18 23 11/16 3/4 52 15/16 32 7/8 17 29 7/16 26 6 6
30 X 30 44 22 28 7/8 3/4 58 9/16 41 3/8 21 3/4 32 13/16 30 6 1/4 6 1/4
MD Series Rotary
Airlock Valve
Drop-Thru
Feeder/ Airlock
• Heavy duty rugged construction • Surge hoppers, blow through adapters, shear
plate deflectors
• Precision machining of components
• Rotor options: closed end, metering style,
• Unique shaft seal design shallow pocket, adjustable tips, teflon coated
PLAN VIEW
ELEVATION ELEVATION
ITEM A B C D E F G H I J K
MD 4 7 3/8 3 11/16 9 5/16 3/8 17 11/16 14 5/8 4 1/2 9 3/8 4Ø 7 1/2 N/A
MD 6 10 5/8 5 5/16 8 1/2 1/2 21 5/16 17 15/16 5 1/2 13 1/16 6Ø 9 1/2 N/A
MD 8 12 1/2 6 1/4 9 7/16 5/8 23 11/16 19 5/16 6 3/4 13 15/16 8Ø 11 3/4 N/A
MD 10 15 7 1/2 11 3/8 3/4 26 1/8 22 15/16 8 15 1/16 10Ø 14 1/4 N/A
MD 12 18 3/8 9 3/16 13 3/4 28 7/16 23 11/16 9 1/2 16 5/16 12Ø 17 N/A
MD 14 20 1/2 10 1/4 14 1/4 1 31 7/16 24 13/16 10 1/2 17 15/16 14Ø 18 3/4 N/A
MD 16 23 11 1/2 15 1/2 1 33 1/16 26 3/16 11 3/4 18 9/16 15Ø 21 1/4 N/A
FT (Flex-Tip)
Rotary Valve
ELEVATION ELEVATION
VALVE A B C D E F G H I J K L M N
FT 4 4Ø 7Ø 6 7/16Ø 6 3 1/4 1 1/4Ø 1/4 X 1/8 4 7/8 6 1/2 11 3/8 13 12 7/16 6 1/2
FT 6 6Ø 9 1/4Ø 8 7/16Ø 8 3 1/4 1 1/4Ø 1/4 X 1/8 6 9 1/2 16 15 13 7 1/2
FT 8 8Ø 11 1/4Ø 8 7/16Ø 10 3 1/4 1 1/4Ø 1/4 X 1/8 7 1/4 10 3/4 18 19 13 9 1/2
FT 10 10Ø 13 1/4Ø 12 7/16Ø 12 3 1/4 1 7/16Ø 3/8 X 3/16 8 1/4 10 3/4 19 23 13 13/16 11 1/2
FT 12 12Ø 15 1/4Ø 12 7/16Ø 14 3 1/4 1 7/16Ø 3/8 X 3/16 9 12 1/2 21 1/2 27 13 7/8 13 1/2
FT 14 14Ø 18 1/2Ø 16 7/16Ø 16 1/2 3 1/4 1 11/16Ø 1/2 X 1/4 11 1/2 15 1/8 26 7/16 35 17 7/8 17 1/2
FT 16 16Ø 19 1/4Ø 16 7/16Ø 18 3 1/4 1 11/16Ø 1/2 X 1/4 11 5/16 15 1/8 26 7/16 35 17 7/8 17 1/2
FT 20 20Ø 23 3/8Ø 24 7/16Ø 22 3 1/4 2 3/16Ø 1/2 X 1/4 14 1/8 17 1/2 31 5/8 43 3/8 17 7/8 21 11/16
FT 22 22Ø 25 1/2Ø 24 7/16Ø 24 3 1/4 2 3/16Ø 1/2 X 1/4 15 7/8 18 3/4 34 5/8 49 1/2 17 7/8 17 7/8
FT 24 24Ø 27 1/2Ø 24 7/16Ø 26 3 1/4 2 3/16Ø 1/2 X 1/4 15 7/8 18 3/4 34 5/8 49 1/2 17 7/8 17 7/8
FT 30 30Ø 33 1/2Ø 32 7/16Ø 32 1/8 3 1/4 2 3/16Ø 1/2 X 1/4 18 11/16 22 40 11/16 61 1/2 18 5/8 30 3/4
DR-S Series*
Square Flange
Rotary Airlock
Feeders
Drop -Thru
Drop-in Replacement
for HD and HDX Series
Features
• Pressure differentials to 15 psig • Standard rotor design comes complete with
beveled tip and sides.
• Outboard Bearings (permanently sealed and
lubricated) • Refer to CI Series brochure for square inlet and
outlet flanges in small and larger sizes.
• Replaceable packing rings
• Refer to MD Series brochure for round inlet and
• Available in three sizes outlet flange configurations.
• Square Flanges Options
• Heavy shaft diameters minimizing rotor
deflection • 6-vane or 8-vane rotor available
• Unique shaft seal design (less maintenance) • ACST - 4 shaft seals or packing gland style
shaft seals available.
• Available in cast iron, 304 SS and 316 SS
• Rotor options: closed end rotor, shallow pocket
• High temperature option up to 750 º F design, adjustable rotor tips
• Heavy duty rugged construction • Rotor adjustable rotor tips available in EPDM,
• Precision machining of components polyurethane, stainless steel and hardened steel
• Hard chrome interior
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.acsvalves.com
AF (AERO-FLOW)
Feeder
AF Endplate
PLAN VIEW
ELEVATION
VIEW "A"
VALVE A B C D E F G H I J K L M N O P
AF-A 6 5/8 6 3/4 3 3/8 3 3/8 11 1/4 10 1/4 21 9/16 14 7/8 42 9/16 8 1/2 13 3/16 21 11/16 7 1/2 10 17 1/2 3 1/4
AF-B 13 1/2 6 3/4 3 1/2 3 3/8 18 10 1/4 21 9/16 17 7/8 44 11/16 11 7/8 16 9/16 28 7/16 7 1/2 10 17 1/2 3 1/4
AF-C 13 3/4 12 4 1/16 4 1/16 17 1/4 15 1/2 23 9/16 27 5/16 50 7/8 13 11/16 18 15/16 32 5/8 9 1/2 11 5/8 21 1/8 3 1/2
AF-D 25 1/4 12 4 5/8 4 5/8 28 3/4 15 1/2 23 9/16 30 15/16 54 1/2 19 1/4 25 41 1/4 9 1/2 11 5/8 21 1/8 3 1/2
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.acsvalves.com
Quick Clean-MD
Series
Rotary Airlock Valve
Watch our Quick Clean videos at:
www.powderandbulk.com.
(Search “ACS Valves” under Videos)
• Available in cast iron, 304 SS and 316 SS • Adjustable rotor tips available in hardened
steel, stainless steel, and bronze
• Quick Take Apart for cleaning all internal • Interior coating options: hard chrome and teflon
surfaces hassle free. Disassemble, clean, and
reassemble without tools in just minutes • Shaft seal and rotor pocket air purge
• Pressure differentials up to 15 psig
• Optional interior surface finishes up to #4 polish
(150-180 grit) • Special drive packages
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.acsvalves.com
designed for your success
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.acsvalves.com
• Available in cast iron, 304 SS and 316 SS • Adjustable rotor tips available in hardened
steel, stainless steel, and bronze
• Quick Take Apart for cleaning all internal • Interior coating options: hard chrome and teflon
surfaces hassle free. Disassemble, clean, and
reassemble without tools in just minutes • Shaft seal and rotor pocket air purge
• Pressure differentials up to 15 psig
• Optional interior surface finishes up to #4 polish
(150-180 grit) • Special drive packages
• Supplied with direct drive package
• High temperature options up to 500 F
• Standard 8-vane rotor design comes complete
with beveled tips and sides, option 6-vane • Available in square or round inlet/outlet flanges
available
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.acsvalves.com
NEMA 4 Timer
• Available in 3 standard sizes (8” x 10” x 12”) • Single & double flap configuration available
- Also available in custom sizes
• Available in gravity counter weight design
• Dependable effective design
• Stainless Steel construction available
• Pressure differential rated for 30” H2O
• Inlet/outlet round flange adapters
• 10 ga. carbon steel housing construction
• Abrasion resistant steel flappers
• Carbon steel flappers with neoprene seal strips
• Elevated temperature to 500 F
• Pneumatic Operation
• Dutchman can be removed to shorten overall
• Standard temperature up to 250 F height
ACS Gravity
Diverter Valve
Features Options __
• 2-way Y-Style diverter valve - Fully Guarded • Fabricated carbon steel, stainless steel or
aluminum construction
• Available in 7 standard sizes (4” through 16”)
- Also available in custom sizes • Inlet/outlet round flange adapters
• Air control package including solenoid, fitting, & • Back removable panel for easy change of
polyurethane tubing flapper blade
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.acsvalves.com
Inlet filter
designed for your success
611 Argyle St. N. Caledonia, Ontario N3W 1M1 TEL: (800) 655-3447 FAX: (800) 955-4991
Email: sales@acsvalves.com Website: www.rotaryvalverepair.com / www.acsvalves.com
Ship us your rotary valves/airlocks in need of repair. We will arrange freight to and
from your facility, adding the freight cost to the final invoice. We will assess the
airlock and send a quote for repairs.
Replace rotor assembly *We repair all rotary valves including Meyer, Flowtronics,
MAC, KICE, Smoot, Semco, Prater, K-Tron/ Premier,
Repaint Rotolok, and of course, OUR OWN!
How To Ship To Us:
Call or email us, and we will arrange the shipment, send you the
required paperwork, and have the valve picked up the next day!