Professional Documents
Culture Documents
1. Lab No : 1
4. knowledge on Networking
Installation Method
A1.
S2 - 0002 M1 - 1000
M
1
END
M
2
END
A2.
i. Kod Mnemonic
A3.
i. Ladder Diagram
From the practical that have been done, these PLC frequently used in motor and conveyer control in
production lines. Using sensors as input to the PLC then control motor as an output.
PLC also frequently integrate with Timer or Counter for certain function. Timer or Counter used to either
to delay the start or stop time of the operation or output.
For other application also, controlling of sequential output using multiple input also adopt in PLC
application.
Ladder Diagram used to show the logic and to understand the operation sequence. From the Ladder
Diagram, we convert to Mnemonic Code as PLC language or command logic control. Then we able to
downloaded to the before we can run the program. The programming either we can use the console to
key in or using win based application called SysWin.
Conclusion
From these practical we:
- Able to understand the PLC operation and application.
- Able to differentiate between input, process and output
- Able to convert from the request to the logic control using Ladder Diagram
- Able to convert from Ladder Diagram to the Mnemonic code before downloaded to PLC