Professional Documents
Culture Documents
FAISPC MARK-2
MODEL (for FA-150)
www.furuno.co.jp
The paper used in this manual
is elemental chlorine free.
9-52 Ashihara-cho,
Nishinomiya, 662-8580, JAPAN
Telephone : +81-(0)798-65-2111
Fax : +81-(0)798-65-4200
1. INSTALLATION ................................................................................................ 1
1.1 Requirements ..................................................................................................................1
1.2 Software Installation ........................................................................................................2
1.2.1 Installing the HASP device driver..........................................................................2
1.2.2 Installing the software program.............................................................................5
1.3 Network Setting at PC .....................................................................................................8
1.4 Initial Settings ................................................................................................................14
1.4.1 PC port settings ..................................................................................................14
1.4.2 Transponder unit (FA-1501) settings ..................................................................15
1.4.3 Long-range mode setting....................................................................................17
2. OPERATION ................................................................................................... 19
2.1 Starting Up/Quitting the Program...................................................................................19
2.2 Display Layout...............................................................................................................20
2.2.1 Indications...........................................................................................................20
2.2.2 AIS target symbols..............................................................................................21
2.2.3 Own ship data indications ...................................................................................22
2.2.4 Received target list .............................................................................................22
2.3 Operations on the Map Window ....................................................................................24
2.3.1 Showing detailed target data ..............................................................................24
2.3.2 Choosing a display range ...................................................................................24
2.3.3 Shifting the chart.................................................................................................25
2.3.4 Enlarging, shrinking the chart .............................................................................25
2.3.5 Choosing a presentation mode ...........................................................................26
2.3.6 Choosing screen center......................................................................................26
2.3.7 Finding range and bearing to a point ..................................................................27
2.3.8 Setting proximity alarm range .............................................................................28
2.4 Confirming Own Ship Data ............................................................................................29
2.5 Setting up for a Voyage .................................................................................................30
2.6 Setting CPA and TCPA ..................................................................................................32
2.7 Other Vessel List ...........................................................................................................33
2.7.1 Displaying other vessel list .................................................................................33
2.7.2 Operations on the other vessel list .....................................................................34
2.8 Messages ......................................................................................................................36
2.8.1 Sending a message to a specific vessel.............................................................36
2.8.2 Sending a message to all vessels ......................................................................37
2.8.3 Requesting a message .......................................................................................37
2.8.4 Message logs......................................................................................................38
2.9 Regional Operating Channels .......................................................................................40
2.9.1 Viewing channels, Tx power ...............................................................................40
2.9.2 Editing regional operating area status ................................................................41
i
TABLE OF CONTENTS
3. MAINTENANCE ............................................................................................. 49
3.1 Displaying Program Version Numbers .......................................................................... 49
3.2 Clearing Memories ........................................................................................................ 49
APPENDIX .......................................................................................................... 51
INDEX............................................................................................................... IN-1
ii
FOREWORD
A Word to the Owner of the FAISPC MARK-2
FURUNO Electric Company thanks you for purchasing the UAIS Display Software FAISPC
MARK-2 (for UAIS Transponder FA-150). We are confident you will discover why the
FURUNO name has become synonymous with quality and reliability.
For over 60 years FURUNO Electric Company has enjoyed an enviable reputation for
quality and reliability throughout the world. This dedication to excellence is furthered by our
extensive global network of agents and dealers.
Please carefully read and follow the operation and troubleshooting procedures set forth in
this manual to obtain the best performance from the equipment.
We would appreciate feedback from you, the end-user, about whether we are achieving our
purposes.
Features
The FA-150 is a universal shipborne AIS (Automatic Identification System) capable of
exchanging navigation and ship data between own ship and other ships or coastal stations.
It complies with IMO MSC.74(69) Annex 3, A.694, ITU-R M.1371-1 and DSC ITU-R M.825.
It also complies with IEC 61993-2 (Type testing standard), IEC 60945 (EMC and
environmental conditions).
The PC displays all required information about static data, dynamic data, voyage-related
data and short safety-related messages. The information and messages are automatically
updated according to the ITU-R M.1371-1.
iii
FOREWORD
System Configuration
GPS Antenna
VHF Antenna
Display Unit
LAN or
FA-1502
D sub 9-pin (RS-232C)
UNIVERSAL AIS
Transponder Unit
MENU ENT
FA-150 PWR
Laptop PC
FAISPC MARK-2
software installed
in PC
Notice
• No part of this manual may be copied or reproduced without written permission.
• If this manual is lost or worn, contact your dealer about replacement.
• FURUNO will assume no responsibility for the damage caused by improper use or
rewriting of this software by an unauthorized agent or a third party.
• The contents of this manual and software specifications are subject to change without
notice.
• The example screens (or illustrations) shown in this manual may not match the screens
you see on your display. The screen you see depends on your system configuration and
equipment settings.
• This manual is intended for use by native speakers of English.
• Store this manual in a convenient place for future reference.
iv
1. INSTALLATION
1.1 Requirements
FAISPC MARK-2 components
Name Type Code No. Remarks
・Drivers folder
CD-ROM 2450067 005-860-480 ・setup.exe
・hdd32.exe
USB Dongle OP24-13 005-860-490
Windows is a registered trademark of Microsoft Corporation in the United States and other
countries.
Other requirements
• Monitor resolution must be at least 1024x768.
• For best performance, the OS font size should be “100%”. Set font size as follows:
1
1. INSTALLATION
Install >
5. Choose “I accept the license agreement” and click the Install button to start the
installation.
6. When “Finished” appears and then click the Finish button.
After completing the above procedure, set the USB dongle to the USB port on the PC to
confirm if the installation was completed successfully. If the display below does not appear
go to page 5 “Installing the software program”. If the display below appears, complete the
procedure which follows.
2
1. INSTALLATION
1. Choose “No, not this time” and click the Next button.
2. Choose “Install from a list or specific location” and click the Next button.
3. Check “Include this location in the search” and click the Browse button.
2450067-XX.XX (F:)
3
1. INSTALLATION
4. Click “+” for “2450067-XX.XX (CD-ROM)” to open sub folders. For Windows XP, choose
“winxp” (For Windows 2000, “winnt”) and then click the OK button.
4
1. INSTALLATION
( )
5
1. INSTALLATION
3. If desired, enter your name and organization. Choose appropriate option for “Install this
application for: “Anyone who uses this computer (all users)” to allow anyone using the
PC to access this program, or “Only for me” to allow only a specific person to access this
program.
4. Click the Next button.
5. Click the Next button to install the program at the location shown, or click the Change
button to choose a different location.
6
1. INSTALLATION
6. Confirm settings and then click the Install button to install the program software. If the
installation was successful the following screen appears.
Windows 7: Start→Control Panel→a) Programs and Features (View by: Small icons or
Large icons), or b) Click Uninstall a program (View by: Category) →Right-click program then
select Uninstall.
7
1. INSTALLATION
Windows 2000/XP
1. Start up the PC. Right-click the My Network Places on the desktop.
2. Click Properties in the list to show the Local Area Connection dialog box.
3. Right-click Local Area Network. Click Properties to show the Local Area Connection
Properties dialog box.
4. Select the General tab, highlight Internet Protocol (TCP/IP) and click the Properties
button.
8
1. INSTALLATION
9
1. INSTALLATION
Windows Vista
1. Click the Start button and then right-click Properties.
2. Click Properties in the list to show the Network and Sharing Center dialog box.
10
1. INSTALLATION
6. Highlight Internet Protocol Version 4 (TCP/IPv4) and then click Properties. The dialog
box shown below appears.
11
1. INSTALLATION
Windows 7
1. Click the Start button then select Control Panel.
2. Do one of the following depending on current setting of View by.
a) Large icons or small icons: Click Network and Sharing Center.
b) Category: At Network and Internet, click View network status and tasks.
4. Click Properties.
12
1. INSTALLATION
5. Highlight Internet Protocol Version 4 (TCP/IPv4) and then click the Properties button.
13
1. INSTALLATION
Available when
SIO is selected
at USE PORT.
Confirm that “Online” appears at the upper left corner on the screen.
14
1. INSTALLATION
1. Click Initial Settings on the menu bar followed by clicking Hardware Settings to show
the Hardware Settings dialog box.
15
1. INSTALLATION
Note: If LAN connections have been completed, you may enter LAN settings from this
equipment. Click the LAN button on the Hardware Settings dialog box to show
the Transponder LAN Port dialog box.
Esc:Exit
16
1. INSTALLATION
1. Click Initial Settings on the menu bar followed by clicking L/R Mode to show the L/R
Mode dialog box.
17
1. INSTALLATION
18
2. OPERATION
2.1 Starting Up/Quitting the Program
Before starting the program, place the USB dongle in the USB port. Keep the dongle in the
port while the program is in use. If the dongle is not in place the message “HASP not found”
appears.
FAISPC_MARK2.exe icon
When the program has booted up, the “warning” message shown below appears.
Warning message
4. Read the message and then click the OK button to erase the message.
5. To quit the program, click File on the menu bar followed by clicking Quit. (Alternately,
click the Close button (X) at the top right-hand corner.) The prompt below appears.
Yes No
6. Click the Yes button to quit. All equipment settings are stored in the file “PcMKD.ini”.
19
2. OPERATION
11 1.5nm 3
3nm
6nm
12nm
8
24nm
36nm
17
8 8
10 19
18
9
20 8 4
8
16
7
21
24
5
6
(1) Own ship data plus date and time (12) Tx status (Green: TX over CH A; Yellow: TX
over CH B)
(2) Map width button: Sets map width to 1/3 (13) Transponder status
or 2/3 of screen width alternately. Online: Transponder is connected
Offline: Transponder powered off or
disconnected.
(3) Chosen target’s detailed data (14) Range and bearing indication: Shows range
and bearing from own ship to pointer.
(4) Target list (15) Grid
(5) Function keys (F1 – F12) (16) Range ring
(6) Number of targets being received (17) Proximity alarm range marker
(7) Map window (18) Own ship marker
(8) Presentation mode button (19) Target track
(9) Radius button (set proximity alarm range) (20) Target
(10) Shift buttons (shift display) (21) Pointer
(11) Range buttons (choose range) (22) Menu bar
20
2. OPERATION
Transmitting target Green The circle (light blue) flashes once when the
vessel’s AIS transponder transmits.
Distress signal Green The circle (red) flashes once every three
transmitting target seconds when the vessel’s AIS transponder
transmits distress signal.
21
2. OPERATION
The CPA and TCPA indications of a target are shown in red when its CPA and TCPA are
less than the preset CPA and TCPA. When a target goes inside the CPA range marker that
target’s RNG indication in the target list turns red.
You may sort the list by MMSI No., Range, Bearing, Name, CPA, TCPA, or Class. Click
appropriate column title to sort by that method. The list can be scrolled with the mouse
thumbwheel or scroll bar.
MMSI No.
Range from own ship CPA
Bearing TCPA
Name AIS class*
Title
Yellow highlight
shows target is
selected on the
map window.
Scroll
bar
* AIS class
A: SOLAS ship
AtoN: Aid to Navigation
B: Non-SOLAS ship
BS: Base Station
SAR: Search And Rescue vessel or aircraft
22
2. OPERATION
Searching a vessel
You can quickly search vessels in the received target list as follows:
1. Click the F3:Search button or press the F3 key to show the Search prompt.
Search
The 1st target in the alphanumeric sort order chosen is highlighted in yellow in the target list.
Enter next alphanumeric character to narrow the search.
To search another vessel, repeat this procedure. In this case, however, the search box
shown above does not appear.
Pop-up menu
A pop-up menu provides quick access to target-related functions. Right-click a target on the
target list to show the pop-up menu.
View Center
Create Message
Vessel List
AIR
23
2. OPERATION
Range buttons
24
2. OPERATION
Shift buttons
Shrinking: Place the cursor at any location. Press and hold down the right and left mouse
buttons together and drag the mouse in a right-upward motion. When the symbol
appears release both mouse buttons.
Restoring previous zoom factor: Press and hold down the right and left mouse buttons
together and drag the mouse in a left-upward motion. Release both mouse buttons when
the symbol appears.
25
2. OPERATION
26
2. OPERATION
S
Own ship
marker
Pointer
S
Own ship
marker
Pointer
Pointer
27
2. OPERATION
Use ▲ or ▼ on the Radius button to adjust the proximity alarm range marker. Note that the
proximity alarm range marker and the CPA set on the CPA Setting dialog box are
independent of one another.
Radius button
28
2. OPERATION
Click Own Vessel Data on the menu bar followed by clicking Static Data to show the Static
Data dialog box. (You may also display this dialog box by pressing the F1 key.)
29
2. OPERATION
1. Click Own Vessel Data on the menu bar followed by clicking Static Data. (You may also
execute this step by clicking F1:Static Data at the bottom of the screen or pressing the
F1 key.)
2. Click the F1:Change button or press the F1 key to show the Set Voyage Static Data
dialog box.
30
2. OPERATION
7. Click the DESTINATION button. Enter destination with the alphabet keys (max. 20
characters) and then click the OK button.
8. Click the ETA button. Enter estimated time of arrival (day, month, hour and minute) and
then click the OK button.
9. Click the OK button to register settings.
10. Click the Esc:Exit button or press the Esc key to escape.
10 FUTURE USE ALL SHIPS OF THIS TYPE 60 PASSENGER SHIPS ALL SHIPS OF THIS TYPE
11 FUTURE USE CARRYING DG, HS, OR MP(A) 61 PASSENGER SHIPS CARRYING DG, HS, OR MP(A)
12 FUTURE USE CARRYING DG, HS, OR MP(B) 62 PASSENGER SHIPS CARRYING DG, HS, OR MP(B)
13 FUTURE USE CARRYING DG, HS, OR MP(C) 63 PASSENGER SHIPS CARRYING DG, HS, OR MP(C)
14 FUTURE USE CARRYING DG, HS, OR MP(D) 64 PASSENGER SHIPS CARRYING DG, HS, OR MP(D)
15 FUTURE USE FUTURE USE 65 PASSENGER SHIPS FUTURE USE
16 FUTURE USE FUTURE USE 66 PASSENGER SHIPS FUTURE USE
17 FUTURE USE FUTURE USE 67 PASSENGER SHIPS FUTURE USE
18 FUTURE USE FUTURE USE 68 PASSENGER SHIPS FUTURE USE
19 FUTURE USE NONE 69 PASSENGER SHIPS NONE
20 WIG ALL SHIPS OF THIS TYPE 70 CARGO SHIPS ALL SHIPS OF THIS TYPE
21 WIG CARRYING DG, HS, OR MP(A) 71 CARGO SHIPS CARRYING DG, HS, OR MP(A)
22 WIG CARRYING DG, HS, OR MP(B) 72 CARGO SHIPS CARRYING DG, HS, OR MP(B)
23 WIG CARRYING DG, HS, OR MP(C) 73 CARGO SHIPS CARRYING DG, HS, OR MP(C)
24 WIG CARRYING DG, HS, OR MP(D) 74 CARGO SHIPS CARRYING DG, HS, OR MP(D)
25 WIG FUTURE USE 75 CARGO SHIPS FUTURE USE
26 WIG FUTURE USE 76 CARGO SHIPS FUTURE USE
27 WIG FUTURE USE 77 CARGO SHIPS FUTURE USE
28 WIG FUTURE USE 78 CARGO SHIPS FUTURE USE
29 WIG NONE 79 CARGO SHIPS NONE
30 FISHING 80 TANKER ALL SHIPS OF THIS TYPE
31 TOWING 81 TANKER CARRYING DG, HS, OR MP(A)
32 LENGTH OF THE TOW EXCEEDS 200M OR BREADTH EXCEEDS 25M 82 TANKER CARRYING DG, HS, OR MP(B)
33 ENGAGED IN DREDGING OR UNDERWATER OPERATIONS 83 TANKER CARRYING DG, HS, OR MP(C)
34 ENGAGED IN DIVING OPERATIONS 84 TANKER CARRYING DG, HS, OR MP(D)
35 ENGAGED IN MILITARY OPERATIONS 85 TANKER FUTURE USE
36 SAILING 86 TANKER FUTURE USE
37 PLEASURE CRAFT 87 TANKER FUTURE USE
38 FUTURE USE 88 TANKER FUTURE USE
39 FUTURE USE 89 TANKER NONE
40 HSC ALL SHIPS OF THIS TYPE 90 OTHER TYPE OF SHIP ALL SHIPS OF THIS TYPE
41 HSC CARRYING DG, HS, OR MP(A) 91 OTHER TYPE OF SHIP CARRYING DG, HS, OR MP(A)
42 HSC CARRYING DG, HS, OR MP(B) 92 OTHER TYPE OF SHIP CARRYING DG, HS, OR MP(B)
43 HSC CARRYING DG, HS, OR MP(C) 93 OTHER TYPE OF SHIP CARRYING DG, HS, OR MP(C)
44 HSC CARRYING DG, HS, OR MP(D) 94 OTHER TYPE OF SHIP CARRYING DG, HS, OR MP(D)
45 HSC FUTURE USE 95 OTHER TYPE OF SHIP FUTURE USE
46 HSC FUTURE USE 96 OTHER TYPE OF SHIP FUTURE USE
47 HSC FUTURE USE 97 OTHER TYPE OF SHIP FUTURE USE
48 HSC FUTURE USE 98 OTHER TYPE OF SHIP FUTURE USE
49 HSC NONE 99 OTHER TYPE OF SHIP NONE
50 PILOT
51 SEARCH AND RESCUE VESSELS WIG: Wing in ground
52 TUGS HSC: High speed craft
53 PORT TENDERS DG: Dangerous goods
54 VESSELS WITH ANTI-POLL UTION FACILITIES OR EQUIPMENT HS: Harmful substances
55 LAW ENFORCEMENT VESSELS MP: Marine pollutants
56 SPARE-FOR ASSIGNMENTS TO LOCAL VESSELS 0-9: Undefined
57 SPARE-FOR ASSIGNMENTS TO LOCAL VESSELS
58 MEDICAL TRANSPORTS
59 SHIPS ACCORDING TO RESOLUTION NO 18
Vessel categories
31
2. OPERATION
1. Click Option on the menu bar followed by clicking CPA Settings to show the CPA
Settings dialog box.
Note: The CPA and TCPA set here are not passed to the FA-150.
32
2. OPERATION
Title
bar
Scroll
bar
33
2. OPERATION
Note: To delete a picture you have loaded, choose and display it and then click the CLEAR
button. The prompt shown below appears. Click the Yes button to clear the picture.
Yes No
“Watching” a vessel
You may use the “watch” feature to monitor a vessel. Choose a target from the Other Vessel
List, and then check WATCH at the left side of the display. The target’s MMSI no. is then
marked in green on the Other Vessel List. This is also done on the Target List.
When a watched target transmits, a message indicating this appears on the display. Below
is an example of this message. Click the OK button to erase the message. The message
does not appear for a watched vessel from which you have received two transmissions or
more.
34
2. OPERATION
Searching a vessel
1. Click the F3:Search button or press the F3 key to show the Search prompt. (Note that
the Search prompt only appears at the initial press of F3.)
Search
The 1st target in the alphanumeric sort order chosen is highlighted in yellow in the Other
Vessel List.
Data Delete
Yes No
35
2. OPERATION
2.8 Messages
You may send and receive messages via the VHF link, to a specified ship (MMSI) or all
ships in the area. Messages can be sent as an alert for safety of navigation, for example, an
iceberg sighted. Routine messages are also permitted.
1. On the Target List, double-click the vessel you want to send a message. The display
should now look something like the one below with “ADDRESSED” selected, the MMSI
of the target shown in the MMSI box and ship name in the SHIP NAME box.
Note: You may also choose a vessel from the Other Vessel List. Click Message on the
menu bar followed by clicking Create Message on the menu bar to show the
Create Message dialog box. Click the VESSEL LIST button to show the Other
Vessel List. Choose vessel, and then click the F1:Create Message button or
press the F1 key.
36
2. OPERATION
1. Click Message on the menu bar and then click Create Message to show the Create
Message dialog box.
2. If TYPE is selected to “ADDRESSED”, click the TYPE button, choose BROADCAST and
then click the OK button.
3. The default message type is “SAFETY”. To choose “NORMAL”, click the MESSAGE
TYPE button, choose NORMAL and then click the OK button.
4. Click the TRANSMIT CHANNEL button. Choose the VHF channel over which to send
the message and then click the OK button.
5. Click the INPUT MESSAGE button. Type your message in the window and then click
the OK button. (Up to 151 characters may be entered.)
6. Click the Send Message button to send your message, via the FA-150.
7. Click the Esc:Exit button or press the Esc key to finish.
37
2. OPERATION
Click Message on the menu bar followed by clicking TX Log to show the TX log.
TX log
• The meaning of ID codes in the MSG column is shown at the bottom of the log.
• To display a message, double click it, or choose it with the No. scroll button and then
click the Detail button.
• To initiate a message from the Tx log, choose the intended recipient from the message
list and then click the Detail button. The Create Message dialog box appears and the
intended recipient’s particulars (MMSI no., etc.) are automatically selected. Type your
message and then click the Send Message button to send the message.
38
2. OPERATION
RX log
When a message is received the message “YOU’VE GOT A MESSAGE #XX (XX =
message no.) appears. Click the Read button to show the Rx log. You may also display the
Rx log by clicking Message on the menu bar followed by clicking RX Log.
The Rx log stores the latest 20 received messages. When the log becomes full the oldest
received message is automatically deleted to make room for the latest.
RX log
• The meaning of ID codes in the MSG window at the bottom of the screen are shown at
the bottom of the log.
• To display a message, double click it, or choose it with the No. scroll button and then
click the Detail button.
• To reply to a message from the Rx log, choose the intended recipient from the log and
then click the Detail button. The Create Message dialog box appears and the intended
recipient’s particulars (MMSI no., etc.) are automatically selected. Type your message
and then click the Send Message button to send the message.
39
2. OPERATION
A regional operating area is set with the procedure below. The most recent eight areas are
memorized as shown below.
• Automatic setting of VHF DSC (channel 70) from shore-based AIS
• Automatic setting by AIS message from shore-based AIS
• Setting by shipboard system such as ECDIS
• Manual setting
The default values at a regional operating area are as follows:
• Tx power: High (12.5 W)
• Channel no. 2087, 2088
• Frequency bandwidth: 25 kHz
• Tx/Rx mode: Tx/Rx
40
2. OPERATION
Notes on registration
Procedure
1. Click Own Vessel Data on the menu bar followed by clicking Region List to show the
Region List dialog box.
41
2. OPERATION
Region settings
1) Channel, bandwidth
2) Power
3) TRX mode
4) Transition zone
3. Click the TRANS ZONE button. Choose zone size (1-8 nm) from the list box and then
click the OK button. TRANS ZONE means the transition zone of a channel. The
specified primary channel (A channel) within the transition zone and the primary channel
within the adjoining sea area used.)
20-200 nm
LAT-NE
LON-NE
20-200 nm
ZONE
1-8 nm
LAT-SW
LON-SW
4. Click the CHANNEL A button. Key in channel number with the numeric keys and then
click the OK button. See the appendix in the FA-150’s operator’s manual.
42
2. OPERATION
5. Click the BAND WIDTH button. Choose bandwidth from the list box for either DEFAULT
or 12.5 kHz and then click the OK button. “Default” judges bandwidth by channel
number.
6. Set CHANNEL B and its bandwidth similar to how you set CHANNEL A.
7. Click the TX/RX MODE button. Choose TX/RX mode from the list box and then click the
OK button.
TX: A/B RX: A/B, TX: A RX: A/B, TX: B RX: A/B
RX: A/B, RX: A, RX: B
8. Click the POWER button. Choose power (2.0 and 12.5(W)) from the list box and then
click the OK button.
9. Do one of the following to specify sea area:
Specify sea area directly on map
a) Place the pointer on the start point of the area.
b) Drag the pointer to the end point of the area. A cursor marks the area drawn.
c) Click the left button. The color of the cursor changes from pink to light-blue. The
area specified here will be reflected in the LAT-NE and LON-SW boxes at right side
of the screen.
Manually enter NE and SW latitudes and longitudes
a) Click the LAT-NE button. Enter latitude-northeast position and then click the OK button.
b) Click the LON-NE button. Enter longitude-northeast position and then click the OK
button.
c) Click the LAT-SW button. Enter latitude-southwest position and then click the OK
button.
d) Click the LON-SW button. Enter longitude-southwest position and then click the OK
button.
e) Click the Draw button to redraw the region, according to your settings.
10. Click the Set button.
11. Press the Esc key twice to escape.
43
2. OPERATION
1. Click Option on the menu bar followed by clicking Sensor Status to show the Sensor
Status dialog box. (You may also display it by clicking F5:Sensor (at the bottom of the
screen) or pressing the F5 key.)
2. If sensor status is not shown, click the F1:Sensor button or press the F1 key.
Click to close
Sensor status display (sensor status)
• To update this window, click the Refresh button.
44
2. OPERATION
1. Click Option on the menu bar followed by clicking Sensor Status to show the Sensor
Status dialog box.
2. If not the GPS status display is not shown, click the F2:Internal GPS button or press the
F2 key.
Click to close
45
2. OPERATION
Click to close
Alarm Status display
• The status received from the AIS transponder is shown in color: Light-blue, normal; Yellow,
acknowledged, and Red, abnormal.
• To send acknowledgement to the FA-150 for an item displayed in red, click the
ACKNOWLEDGE button. After the FA-150 receives this information the indication
formerly shown in red is now shown in yellow.
46
2. OPERATION
1. Click Option on the menu bar followed by clicking Display Settings to show the Display
Settings dialog box.
* These items may also be set from the map window by pressing
the right mouse button to show the pop-up menu shown on
page 21.
47
2. OPERATION
TRAIL CLEAR: Clears own ship’s and other ships’ trails. Choose the trail to clear and then
click the OK button. You are asked if it is OK to clear trails. Click the Yes button to clear
chosen trail.
MAP COLOR: Chooses the color for sea and land.
1. Click the MAP COLOR button followed by clicking the SEA COLOR or LAND COLOR
button as appropriate to show the Color dialog box.
Sliding arrow
TIME DIFFERENCE: If you would rather use local time (instead of UTC), enter the time
difference between your time and UTC time.
48
3. MAINTENANCE
3.1 Displaying Program Version Numbers
Click About on the menu bar followed by clicking Program Version to show the program
version no. of the UAIS display software, transponder and internal GPS. To close the
display, click the Esc:Exit button or press the Esc key.
2450027-xx.xx (yyyy/mm/dd)
2450018-01.xx
48502640xx
1. Click Initial Settings on the menu bar followed by clicking Memory Clear to show the
Memory Clear dialog box.
49
3. MAINTENANCE
3.
4. Choose the memory to clear and then click the OK button.
Set User Default: Restore default user settings except Initial Settings.
GPS Cold Start: Execute cold start to clear outdated Almanac from the GPS receiver.
All Clear: Restore all default settings.
PC Clear: Restore all default software application settings. After executing
clear the application is automatically quit.
5. Click the OK button. Do one of the following depending on the choice you made at step
3.
Set User Default, GPS Cold Start, PC Clear
Clear confirmation prompts for Set User Default, GPS Cold Start and PC Clear
All Clear
Yes No
50
APPENDIX
Menu tree
File Quit
51
APPENDIX
52
INDEX
3 N
3D mode ............................................... 26 North-up mode......................................26
A O
AIS target symbols .............................. 21 Other vessel list
Alarm status display ........................... 46 comments about a vessel ..................34
deleting data from.............................35
C
displaying ..........................................33
Channels
loading picture to ..............................34
editing............................................... 41
searching a vessel .............................35
viewing.............................................. 40
watch function...................................34
Color dialog box ................................... 48
Own ship data.......................................22
CPA....................................................... 32
Own ship trail on/off.............................47
CPA settings dialog box ....................... 32
Create message dialog box .................. 36 P
PC port settings....................................14
D
Picture upload to other vessel list .......34
Display description.............................. 20
Pop-up menu
Display range....................................... 24
map window ......................................27
Display Settings dialog box................. 47
received target list ............................23
E Presentation mode................................26
Enlarging the display .......................... 25 Program version display ......................49
G Proximity alarm range.........................28
GPS status display .............................. 45 Proximity alarm range marker ...........28
Grid on/off ............................................ 47 Q
H Quitting.................................................19
Hardware settings dialog box ............. 15 R
Head-up mode ...................................... 26 Radius button .......................................28
L Range and bearing to a point...............27
L/R mode dialog box ............................ 17 Range buttons.......................................24
Land color............................................. 48 Received target list
Land color............................................. 48 about ..................................................22
Latitude and longitude to a point....... 27 pop-up menu......................................23
Long-range mode setting..................... 17 searching a vessel .............................23
Region list dialog box ...........................41
M Ring scale on/off....................................47
Memory clear ....................................... 49
RX log ....................................................39
Menu tree ............................................. 51
Message request (AIR) dialog box ...... 37 S
Messages Screen center ........................................26
logs .............................................. 38, 39 Sea color ................................................48
requesting from a vessel .................. 37 Sea color ................................................48
sending to a specific vessel .............. 36 Searching a vessel
sending to all vessels ....................... 37 other vessel list .................................35
received target list ............................23
IN-1
INDEX
IN-2