Professional Documents
Culture Documents
HUAWEI
G7-L03C469B530
Software Upgrade Guideline
84035703
Contents
CONTENTS ............................................................................................................................................ 2
1 Version introduction
G760-L03C469B340
2 Upgrade requirements
1) To make sure that the Micro SD card is available with enough free space and can be read and
write.
A Micro SD card of 4GB or more should be available. It is recommended that The Micro SD card
2) To make sure that the power of the battery is enough to run the Upgrade process. It is
3) Upgrade operations will erase all user data. You should backup all important data on an
4) In the shared package, please find the dload\UPDATE.APP as mentioned in chapter 1.2 and this
3 Upgrade introduction
There are two methods to Upgrade: Normal Upgrade and Force Upgrade.
Normal Upgrade needs to start the handset and enter the System Update module. Force Upgrade is just
used when the handset can’t boot up or can’t enter the idle screen.
4 Upgrade operations
Step 2. Copy the Software: main package UPDATE.APP to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD
card.
Step 4. Insert the Micro SD card into the handset and power on. After entering the home screen, To
package:UPDATE APP-> Install to start the upgrade. Please reference to the following
pictures :
Step 5. When the progress bar stops, It will show Update success and then phone will automatically
Note: Once device is flashed to M version,we have to USB update only,Sd card upgrade will not work in current M
version.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the
Micro SD card.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press
the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on
Step 5. When the progress bar stops, the phone will automatically power OFF.
4.3 Exceptions
If upgrade fails, below screen shows a similar failure cause. Please contact customer care
5 Upgrade validate
correct or not.
Build number
G7-L03C469B530