You are on page 1of 1
11.43 Site Coeffictents, Risk Coefficients, and Risk-targeted Maximum Considered Farthquake (MCE) Spectral Response Acceleration Parameters, The spectral response acceleration for short periods (3), adjusted forthe target sk of collapse, shall be determined asthe lesser value of Equations 11.4-1 and 114-2: SEC yaar aaa S.=Sy (1.42) and the spectral response acceleration at a period of 1 second (S), adjusted forthe target risk of collapse, shall be determined a the lesser value of Equations 11.43 and 1.44: S=Cn Sun (1143) S=Sin 44) Sw = mapped deterministic, 5 percent damped, spectral response acceleration parameter at short periods as detined in tia Gait ga oeacaSinaetcae ams (Cus = mapped value ofthe risk coefficient at short periods as defined in Seoton 11.4.1 Si = mapped deterministic, 5 percent damped, spectral response acceleration parameter at a period of 1 second as defined in Section 11.4.1 Siar = mapped uniform-hazard, 5 percent damped, spectral response acceleration parameter ata period of I second as ‘defined in Section 11.4.1 Guy _ = mapped value ofthe risk coefficient at a petiod of I second as defined in Section I 4.1 ‘The MCEx spectral response acceleration for shott periods (Sys) and at 1 second (Sin), adjusted for Site Cass effects and the target risk of collapse, shall be detcrmined by Equations 11.4-5 and 114-6, respectively. Sus= FS: (4s) Sm = FSi (14-6) ‘where site coefficients F, and F, are defined in Tables 11.4-1 and 11.4.2, respectively. When the simplified design procedure of Section 12.14 is used, the value F, shall be determined in accordance with Section 12.14.8.1, and the values of F, 5, Sys, and Sy, need not be determined, "Where Sis less than or equal to 0.04 and Ss is less than or equal to 0.15, the structure is penmited to be assigned to Seismic Design Category A and is only equired to comply with Section 11.7,

You might also like