Professional Documents
Culture Documents
Exercise: 1 of 5
Build this part in SolidWorks. (Save part after each question in e different file in case it must be
reviewed)
Unit system: MMGS (millimetre, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 1060 Alloy Aluminum
Density0= 0.0027g/mm^3
All holes through all unless shown otherwise
- Use the following parameters and equations which correspond to the dimensions labelled in
the images:
A=139 mm
B=55 mm
C=188 mm
D=24 mm
Y=B*2+30 mm
Exercise: 2 of 5
- The geometry of the part has remained constant except for the values of the parameters
listed below.
- Update the parameters to following values:
A=143 mm
B=58 mm
C=192 mm
D=21 mm
Y=B*2+30 mm
Exercise: 3 of 5
Build this part in SolidWorks. (Save part after each question in e different file in case it must be
reviewed)
Unit system: MMGS (millimetre, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 1060 Alloy Aluminum
Density0= 0.0027g/mm^3
All holes through all unless shown otherwise.
- The part is to be modified using the following instructions and parameters in areas KK, JJ and
GG shown in the image
- Use the following parameters and equations which correspond to the dimensions labelled in
the images
Note the change in equation of variable Y.
Build this part in SolidWorks. (Save part after each question in e different file in case it must be
reviewed)
Unit system: MMGS (millimetre, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 1060 Alloy Aluminum
Density0= 0.0027g/mm^3
All holes through all unless shown otherwise.
- Use the following parameters and equations which correspond to the dimensions labelled in
the images
A=145 mm Z=D*2/3
B=53 mm
C=195 mm
D=27 mm
Y=B*2+25 mm
Exercise: 5 of 5
- The geometry of the part has remained constant except for the values of the parameters
listed below.
- Update the parameters to following values:
A=141 mm
B=59 mm
C=197 mm
D=30 mm
Y=B*2+25 mm
Z=D*2/3