Professional Documents
Culture Documents
PRODUCT DESCRIPTION
A water based Eco Friendly Highly Flexible coating for building exteriors. It has excellent
crack bridging properties up to 0.5mm. It is formulated to withstand the fluctuations in the
tropical climatic conditions and has therefore to expand/contract as per fluctuations in the
climactic conditions.
ADVANTAGES:
• Excellent Resistance to atmospheric carbonation effect
• Highly flexible as compared to ordinary exterior emulsion paints
• Excellent Resistance to Chlorides & sulphates
• Most ideal coating for Costal areas, Interior & exterior Coating
• Good crack bridging property (up to 0.5mm)
• Can withstand temperature shocks
• Resists the formation of algae & fungi
• Provides an effective water resistant finish on the building
• It has excellent anti-carbonation property
• Good UV Resistance
• Breathable in nature ,allows Substrate to Breath
• Single component system & easy to apply by Brush / Roller
•
USES: For building exteriors, concrete, plaster, asbestos & bricks.
APPLICATION GUIDELINES:
Surface Preparation:
1. The surface to be painted has to be free from any loose dust particles, grease, or any old
flaking paints. If any, has to be removed thoroughly by mechanical means.
2. Any growth of fungus or algae has to be removed by wire brush followed by water
cleaning
3. Water leakages/seepages from nahani traps, lofts, Chajjas etc. has to be repaired
thoroughly well before applying DuraStretch.
Recommended Application System:
Primer: 1 Coat of DuraStretch ACC Wall Primer-cum-Sealer
Finish: 2 Coats of DuraStretch ACC Coating, 3 coats on Parapet & Chajjas
Method: By Brush/Roller
Drying Time: Touch Dry 30-40 Minutes
Hard Dry 24 Hours
Over coating Time: 6 Hours Minimum
Dilution: 1st Coat of DuraStretch -10% Dilution with potable water
2nd Coat of DuraStretch -5% Dilution with potable water
(Ideally 2nd Coat should be used undiluted to get required DFT
Recommended DFT –Minimum 300 Microns in 3 Coats)
COATING PROPERTIES:
Note : Any Verbal or written recommendation for the application of the product are given in good faith on the basis of our actual state of
scientific and practical knowledge without any commitments, as the method and condition of use vary beyond our control.