Professional Documents
Culture Documents
Swaffham Bulbeck
Cambridge CB25 0NW
Tel +44 1223 812 464
Fax +44 1223 812 462
Email works@gbg.co.uk
Home | Projects | Clients | Techniques | Contact | Newsletter
Chemical Inspection
W elding inspection can be carried out at the fabrication stage or on
Alkali Content site. All of our personnel are qualified to nationally recognised
Carbonation Depth certification schem es for each of the following NDT m ethods: Visual,
Cement Content Magnetic Particle (MPI), Dye Penetrant, Ultrasonic.
High Alumina Cement
Sulfates Qualification tests
Water/Cement Ratio W e can offer a com plete service from witnessing test plates being
welded, carrying out and recording non-destructive and m echanical
tests in the laboratory to interpreting the data and com piling the
Petrographic qualification certificates.
Thin Section Petrographic
Examination
Materials
Asbestos Minerals
Paint Testing
Screeds
Structural Steel
Structures
Post-tensioned Ducts
Residual Stress Measurement Ultrasonic thick ness m easurem ent
Void Volumes
Structural Monitoring BS EN 288 and BS EN 287
Cladding BS EN 288 specifies how a welding procedure is approved by a
procedure test. BS EN 287 covers the principles to be observed in
the approval testing of welder perform ance.
Laboratory testing
The following destructive and non-destructive testing is carried out
under UKAS accreditation:
Destructive Non-destructive
Macro testing
Hardness Testing Visual Inspection
Im pact Testing Magnetic Particle Inspection
Fracture Tests Dye Penetrant Inspection
Tensile Testing Ultrasonic Inspection
Chem ical Testing
converted by W eb2PDFConvert.com
Inspection of a cast-iron bridge
converted by W eb2PDFConvert.com