Professional Documents
Culture Documents
General Steels
PRODUCT MANUAL
CREATIVITY. INNOVATION. TECHNICAL MASTERY.
OVER 60,000 TONNES
STEEL STOCK
OF
www.barrettsteel.com 03
CUSTOMER SERVICE
THE LEVEL OF CUSTOMER SERVICE WE PROVIDE SETS
BARRETT STEEL APART FROM THE COMPETITION.
04 www.barrettsteel.com
DELIVERY
WE PROVIDE A PROMPT AND RELIABLE DELIVERY SERVICE
ACROSS THE UK USING OUR OWN TRANSPORT FLEET. WE
ALSO SUPPLY AND DELIVER OVERSEAS TO THE MIDDLE
EAST, AMERICA AND EUROPE USING OUR TRUSTED
LOGISTICS PARTNERS.
www.barrettsteel.com 05
CONTENTS
ABOUT US 3 IPE SECTIONS 21
CUSTOMER SERVICE 4 IPA/IPEA SECTIONS 22
DELIVERY 5 UPE SECTIONS 23
SHOTBLASTING AND PRIMING 8 PUNCHING AND SHEARING 24
UNIVERSAL BEAMS 9 FLATS 25
SAWING AND DRILLING 12 CONVEX FLATS 27
UNIVERSAL COLUMNS 13 ROUNDS 28
PARALLEL FLANGE CHANNELS 15 SQUARES 28
IPN SECTIONS 16 SAW CUTTING 29
HEA SECTIONS 17 EQUAL ANGLES 30
HEB SECTIONS 18 UNEQUAL ANGLES 31
HEM SECTIONS 19 TEES 31
UPN SECTIONS 20 LASERTUBE CUTTING 32
06 www.barrettsteel.com
CONTENTS CONT.
COLD FORMED FLOOR PLATE 41
HOLLOW SECTIONS HOT ROLLED SHEET 41
CIRCULAR 33 COLD REDUCED SHEET 42
SQUARE 34 GALVANISED SHEET 42
RECTANGULAR 35 PROFILING 43
LT FIBER LASER 36 PLATES 44
SQUARE ERW TUBE 46
HOT FORMED
HOLLOW SECTIONS CIRCULAR ERW TUBE 47
CIRCULAR 37 RECTANGULAR ERW TUBE 49
SQUARE 38 FASTEC HANDRAIL SYSTEM 51
RECTANGULAR 39 WELDED MESH 54
HANDRAILS & WALKWAYS 56
FLAT BED LASER 40 NOMINAL BORE 57
www.barrettsteel.com 07
SHOTBLASTING AND PRIMING
BARRETT’S TAKE PRIDE IN PROVIDING THE BEST QUALITY
PRODUCTS AVAILABLE.
Our in house shotblasting and bar and plates up to 1500mm wide.
priming systems ensure that you, All shotblasting complies with
the customer, get perfectly finished BS EN ISO 8501 : 2001 SA 2.5.
products to fit your personal
requirements. Our automated systems only use
water-based weldable holding
Our surface treatment systems have primer in order to give the best
the ability to shot-blast all structural finish possible – as well as being
sections, hollow sections, merchant kinder to the environment.
08 www.barrettsteel.com
UNIVERSAL BEAMS
BS EN 10025-2 : 2004 - S275JR / S355JR / S355JO / S355J2
www.barrettsteel.com 09
UNIVERSAL BEAMS CONT.
BS EN 10025-2 : 2004 - S275JR / S355JR / S355JO / S355J2
10 www.barrettsteel.com
UNIVERSAL BEAMS CONT.
BS EN 10025-2 : 2004 - S275JR / S355JR / S355JO / S355J2
www.barrettsteel.com 11
SAWING AND DRILLING
BARRETT STEEL HAVE SAWS SUITABLE FOR ALL YOUR
CUTTING REQUIREMENTS FROM ONE OFF CUTS TO MITRE
AND BATCH CUTTING.
Our close coupled sawing and drilling lines are also fully CNC controlled
in order to ensure your requirements are met perfectly. Coordinates can
be received electronically via Stru Cad or XSteel producing information in
DSTV and/or CAM formats, or input from physical drawings.
12 www.barrettsteel.com
UNIVERSAL COLUMNS
BS EN 10025-2 : 2004 - S275JR / S355JR / S355JO / S355J2
www.barrettsteel.com 13
UNIVERSAL COLUMNS CONT.
BS EN 10025-2 : 2004 - S275JR / S355JR / S355JO / S355J2
14 www.barrettsteel.com
PARALLEL FLANGE CHANNELS
BS EN 10025-2 : 2004 - S275JR / S355JR / S355JO
www.barrettsteel.com 15
IPN SECTIONS
16 www.barrettsteel.com
HEA SECTIONS
www.barrettsteel.com 17
HEB SECTIONS
18 www.barrettsteel.com
HEM SECTIONS
www.barrettsteel.com 19
UPN SECTIONS
20 www.barrettsteel.com
IPE SECTIONS
www.barrettsteel.com 21
IPA/IPEA SECTIONS
22 www.barrettsteel.com
UPE SECTIONS
www.barrettsteel.com 23
PUNCHING AND SHEARING
OUR PUNCHING AND SHEARING SYSTEMS ARE DESIGNED
FOR THE PRODUCTION OF CONNECTION PLATES, BASE
PLATES, DIAGONAL TRUSSES AND BRACES.
The systems are capable of punching and shearing both flats and angles.
24 www.barrettsteel.com
FLATS
BS EN 10025-2 : 2004 - S275JR
Continued over
www.barrettsteel.com 25
FLATS CONT.
BS EN 10025-2 : 2004 - S275JR
26 www.barrettsteel.com
FLATS CONT.
BS EN 10025-2 : 2004 - S275JR
CONVEX FLATS
BS EN 10025-2 : 2004 - S275JR
SQUARE EDGE
Size (mm) Kg/m
38 x 13 3.18
51 x 13 4.17
www.barrettsteel.com 27
ROUNDS
BS EN 10025-2 : 2004 - S275JR
BS 970: PART 1 : 1983 070M20
Size (mm) Kg/m Size (mm) Kg/m Size (mm) Kg/m
6 0.22 60 22.00 150 139.00
8 0.39 65 26.00 155 148.00
10 0.62 70 30.20 160 158.00
12 0.89 75 34.70 165 168.00
15 1.39 80 39.50 170 178.00
16 1.58 85 44.50 180 200.00
18 2.05 90 49.90 185 211.00
20 2.47 95 55.60 190 223.00
22 2.98 100 61.70 200 247.00
25 3.85 105 68.00 210 272.00
30 5.55 110 74.60 220 298.00
32 6.31 115 81.50 230 326.00
35 7.55 120 88.00 240 356.00
40 9.86 125 96.30 250 385.00
42 10.92 130 104.00 260 417.00
45 12.51 135 112.00 270 448.00
50 15.41 140 121.00 280 483.00
55 18.69 145 130.00 300 555.00
305 573.00
SQUARES
BS EN 10025-2 : 2004 - S275JR
Size (mm) Kg/m Size (mm) Kg/m Size (mm) Kg/m
6 0.32 25 4.91 65 33.16
8 0.51 30 7.07 70 39.10
10 0.79 35 9.62 75 44.20
12 1.13 40 12.60 80 50.20
16 2.01 45 15.90 90 63.60
20 3.14 50 19.62 100 78.50
22 3.80 60 28.40
28 www.barrettsteel.com
SAW CUTTING
OUR SAW CUTTING FACILITIES INCLUDE SEMI-AUTOMATIC
BAND SAWS AND CARBIDE SAW CUTTING.
Our saws all provide a fast and accurate service to meet your
requirements. We can provide bevelled, bundle, repetition, square and
mitre cutting services.
www.barrettsteel.com 29
EQUAL ANGLES
BS EN 10025-2 : 2004 - S275JR / S355JR
30 www.barrettsteel.com
UNEQUAL ANGLES
BS EN 10025-2 : 2004 - S275JR / S355JR
TEES
BS EN 10025-2 : 2004 - S275JR
Size (mm) Kg/m Size (mm) Kg/m
25 x 25 x 3 1.19 40 x 40 x 6 3.49
30 x 30 x 3 1.60 50 x 50 x 6 4.76
30 x 30 x 5 2.16
www.barrettsteel.com 31
LASERTUBE CUTTING
OUR STATE-OF-THE-ART ON-SITE PROCESSING
FACILITIES INCLUDE 9 TUBE LASERS, INCLUDING THE
JUMBO – THE LARGEST IN THE UK, AND CAPABLE OF
CONTROLLING INPUT LENGTHS OF 18 METRES, AND
OUTPUT LENGTHS OF 15 METRES.
Tube lasers can save time taken by same time the other profiling is
traditional manufacturing being done, therefore eliminating
processes. Eliminate extra work by jigs, fixtures, paper templates,
having the weld preps done on the clamps, rotabroaches, angle
laser. Using the laser’s 3D Head, grinders and saw equipment. This
these labour intensive processes means your manpower can be
can be done in one pass. At the doing more productive work.
32 www.barrettsteel.com
CHS COLD FORMED
BS EN 10219-1 : 1997
S235 / S355J2H / S420MH
Size (mm) Kg/m Size (mm) Kg/m Size (mm) Kg/m
21.3 x 3.0 1.35 88.9 x 3.0 6.36 219.1 x 5.0 26.40
26.9 x 2.0 1.23 88.9 x 4.0 8.38 219.1 x 6.0 31.50
26.9 x 2.5 1.50 88.9 x 5.0 10.30 219.1 x 8.0 41.60
26.9 x 3.0 1.77 114.3 x 3.0 8.23 219.1 x 10.0 51.60
33.7 x 2.0 1.56 114.3 x 3.5 9.56 219.1 x 12.5 63.70
33.7 x 2.5 1.92 114.3 x 4.0 10.90 219.1 x 16.0 80.10
33.7 x 3.0 2.27 114.3 x 5.0 13.50 244.5 x 6.0 35.30
33.7 x 4.0 2.93 114.3 x 6.0 16.00 244.5 x 8.0 46.70
42.4 x 2.0 1.99 139.7 x 4.0 13.40 244.5 x 10.0 57.80
42.4 x 2.5 2.46 139.7 x 5.0 16.60 244.5 x 12.5 71.50
42.4 x 3.0 2.91 139.7 x 6.0 19.80 244.5 x 16.0 90.20
42.4 x 3.2 3.09 139.7 x 8.0 26.00 273.0 x 6.0 39.50
42.4 x 4.0 3.79 139.7 x 10.0 32.00 273.0 x 8.0 52.30
48.3 x 2.5 2.82 168.3 x 4.0 16.20 273.0 x 10.0 64.90
48.3 x 3.0 3.35 168.3 x 5.0 20.10 273.0 x 12.5 80.30
48.3 x 3.2 3.59 168.3 x 6.0 24.00 273.0 x 16.0 101.00
48.3 x 4.0 4.37 168.3 x 8.0 31.60 323.9 x 6.0 47.00
48.3 x 5.0 5.34 168.3 x 10.0 39.00 323.9 x 8.0 62.30
60.3 x 3.0 4.24 168.3 x 12.5 48.00 323.9 x 10.0 77.40
60.3 x 3.5 4.90 193.7 x 4.0 18.70 323.9 x 12.5 96.00
60.3 x 4.0 5.55 193.7 x 5.0 23.30 323.9 x 16.0 121.00
60.3 x 5.0 6.82 193.7 x 6.0 27.80
76.1 x 3.0 5.41 193.7 x 8.0 36.60
76.1 x 4.0 7.11 193.7 x 10.0 45.30
76.1 x 5.0 8.77 193.7 x 12.5 55.90
www.barrettsteel.com 33
SHS COLD FORMED
BS EN 10219-1 : 1997
S235 / S355J2H / S420MH
Size (mm) Kg/m Size (mm) Kg/m Size (mm) Kg/m
25 x 25 x 2.0 1.36 80 x 80 x 5.0 11.30 150 x 150 x 6.0 26.40
25 x 25 x 2.5 1.64 80 x 80 x 6.0 13.20 150 x 150 x 8.0 33.90
25 x 25 x 3.0 1.89 80 x 80 x 8.0 16.40 150 x 150 x 10.0 41.30
30 x 30 x 2.0 1.68 90 x 90 x 3.0 8.01 160 x 160 x 5.0 23.80
30 x 30 x 2.5 2.03 90 x 90 x 3.5 9.26 160 x 160 x 6.0 28.30
30 x 30 x 3.0 2.36 90 x 90 x 4.0 10.50 160 x 160 x 8.0 36.50
40 x 40 x 2.0 2.31 90 x 90 x 5.0 12.80 160 x 160 x 10.0 44.40
40 x 40 x 2.5 2.82 90 x 90 x 6.0 15.10 180 x 180 x 5.0 27.00
40 x 40 x 3.0 3.30 90 x 90 x 8.0 18.90 180 x 180 x 6.0 32.10
40 x 40 x 4.0 4.20 100 x 100 x 3.0 8.96 180 x 180 x 8.0 41.50
50 x 50 x 2.0 2.93 100 x 100 x 4.0 11.70 180 x 180 x 10.0 50.70
50 x 50 x 2.5 3.60 100 x 100 x 5.0 14.40 180 x 180 x 12.5 60.50
50 x 50 x 3.0 4.25 100 x 100 x 6.0 17.00 200 x 200 x 5.0 30.10
50 x 50 x 4.0 5.45 100 x 100 x 8.0 21.40 200 x 200 x 6.0 35.80
50 x 50 x 5.0 6.56 100 x 100 x 10.0 27.40 200 x 200 x 8.0 46.50
50 x 50 x 6.0 7.87 120 x 120 x 4.0 14.20 200 x 200 x 10.0 57.00
60 x 60 x 3.0 5.19 120 x 120 x 5.0 17.50 200 x 200 x 12.5 68.30
60 x 60 x 4.0 6.71 120 x 120 x 6.0 20.70 250 x 250 x 6.0 45.20
60 x 60 x 5.0 8.13 120 x 120 x 8.0 26.40 250 x 250 x 8.0 59.10
70 x 70 x 3.0 6.13 120 x 120 x 10.0 31.80 250 x 250 x 10.0 72.70
70 x 70 x 3.5 7.06 140 x 140 x 4.0 16.80 250 x 250 x 12.5 88.00
70 x 70 x 4.0 7.97 140 x 140 x 5.0 20.70 300 x 300 x 6.0 54.70
70 x 70 x 5.0 9.70 140 x 140 x 6.0 24.50 300 x 300 x 8.0 71.60
80 x 80 x 3.0 7.07 140 x 140 x 8.0 31.40 300 x 300 x 10.0 88.40
80 x 80 x 3.5 8.16 140 x 140 x 10.0 38.10 300 x 300 x 12.5 108.00
80 x 80 x 4.0 9.22 150 x 150 x 5.0 22.30
34 www.barrettsteel.com
RHS COLD FORMED
BS EN 10219-1 : 1997
S235 / S355J2H / S420MH
Size (mm) Kg/m Size (mm) Kg/m Size (mm) Kg/m
50 x 25 x 2 2.15 100 x 50 x 2.5 5.56 200 x 100 x 4 18.00
50 x 25 x 2.5 2.62 100 x 50 x 3 6.60 200 x 100 x 5 22.30
50 x 25 x 3 3.07 100 x 50 x 4 8.59 200 x 100 x 6 26.40
50 x 30 x 2 2.31 100 x 50 x 5 10.50 200 x 100 x 8 33.90
50 x 30 x 2.5 2.82 100 x 50 x 6 12.30 200 x 100 x 10 41.30
50 x 30 x 3 3.30 100 x 60 x 3 7.07 200 x 100 x 12.5 48.70
50 x 30 x 4 4.20 100 x 60 x 3.5 8.16 200 x 120 x 5 23.80
60 x 30 x 3 3.88 100 x 60 x 5 11.30 200 x 120 x 6 28.30
60 x 40 x 2.5 3.60 100 x 60 x 6 13.20 200 x 150 x 6 31.10
60 x 40 x 3 4.25 100 x 60 x 8 17.50 200 x 150 x 8 40.20
60 x 40 x 4 5.45 120 x 60 x 3 8.01 200 x 150 x 10 49.10
60 x 40 x 5 6.56 120 x 60 x 3.5 9.26 250 x 150 x 5 30.10
70 x 40 x 3 4.72 120 x 60 x 5 12.80 250 x 150 x 6 35.80
70 x 40 x 4 6.08 120 x 60 x 6 15.10 250 x 150 x 8 46.50
70 x 50 x 3 5.19 120 x 80 x 3 8.96 250 x 150 x 10 57.00
70 x 50 x 4 6.71 120 x 80 x 4 11.70 250 x 150 x 12.5 68.30
75 x 50 x 3 5.42 120 x 80 x 5 14.40 300 x 100 x 6 35.80
80 x 40 x 3 5.19 120 x 80 x 6 17.00 300 x 100 x 8 46.50
80 x 40 x 4 6.71 120 x 80 x 8 21.40 300 x 100 x 10 57.00
80 x 40 x 5 8.13 120 x 80 x 10 27.40 300 x 100 x 12.5 68.40
80 x 50 x 3 5.66 150 x 100 x 4 14.90 300 x 200 x 6 45.20
80 x 50 x 4 7.34 150 x 100 x 5 18.30 300 x 200 x 8 59.10
80 x 50 x 5 8.91 150 x 100 x 6 21.70 300 x 200 x 10 72.70
90 x 50 x 3 6.13 150 x 100 x 8 27.70 300 x 200 x 12.5 88.00
90 x 50 x 3.5 7.06 150 x 100 x 10 33.40 400 x 200 x 8 71.60
90 x 50 x 4 7.97 160 x 80 x 4 14.20 400 x 200 x 10 88.40
90 x 50 x 5 9.70 160 x 80 x 5 17.50 400 x 200 x 12.5 108.00
160 x 80 x 6 20.70
160 x 80 x 8 26.40
160 x 80 x 10 31.80
www.barrettsteel.com 35
LT FIBER LASER
THE NEW TECHNOLOGY OF THE FIBER LASER OFFERS
SIGNIFICANT ADVANTAGES IN TERMS OF A WIDER RANGE
OF MATERIALS THAT CAN BE PROCESSED - AMONG THEM
HIGHLY-REFLECTIVE MATERIALS SUCH AS COPPER, BRASS,
STAINLESS STEEL AND ALUMINIUM.
We are the first steel stockholder to Benefits of the new system include
introduce a system of this kind to time saving, due to faster cutting
the UK. It is specifically designed speeds and a smoother cut surface
and developed for cutting tubes on the finished products. Compared
and open profiles with the fibre to traditional methods, laser
laser source. processing offers cost savings due
to the reduction in the number of
processes needed.
36 www.barrettsteel.com
CHS HOT FORMED
BS EN 10210-1 : 1994 S355J2H
www.barrettsteel.com 37
SHS HOT FORMED
BS EN 10210-1 : 1994 S355J2H
38 www.barrettsteel.com
RHS HOT FORMED
BS EN 10210-1 : 1994 S355J2H
www.barrettsteel.com 39
BYSTRONICS BYSTAR 4025 -
FLAT BED LASER
RESPONDING TO CHANGING CUSTOMER NEEDS TO
COMBINE STEEL STOCKHOLDING AND PROCESSING;
BARRETT STEEL MADE FURTHER INVESTMENT IN STATE
OF THE ART FLATBED LASER CUTTING EQUIPMENT BY
INSTALLING A BYSTRONICS BYSTAR 4025.
The £500k total investment The Bystar 4025 has a large bed
allows us to provide better cutting size – 4m x 2½m - which results
tolerances on mild steel, stainless in higher productivity. We can
steel, aluminium, titanium and therefore cut larger components
yellow materials, while the large with better nesting and produce
bed size will lead to time and cost more parts in less time. This
savings for customers. reduction in cutting times means
we can pass labour cost savings
The enhanced facilities benefit on to our customers.
customers in the automotive,
aerospace, construction, trailers, The excellent cutting tolerances of
earth-moving equipment and the Bystar 4025 also improve the
general engineering fields, as well production and re-production of
as those requiring decorative complex engineering parts – vital
components for door plates, for designers and manufacturers of
stairwells, kickplates, lift control high performance machinery.
panel plates and kitchen fitments.
40 www.barrettsteel.com
FLOOR PLATE
BS EN 10051 : 1993 /
BS EN 10025-2 : 2004 - S275JR
Thickness Weight 2000 2500 3000 4000 4000
(mm) (kgm2) x 1000 x 1250 x 1500 x 1750 x 1830
3.0 27.50
4.5 39.90
6.0 52.00
8.0 67.36
10.0 83.17
12.5 103.10
2.0 15.70
2.5 19.63
www.barrettsteel.com 41
COLD REDUCED SHEET
BS EN 10130 : 1999 DC01
Thickness Weight 2000 2500 3000
(mm) (kgm2) x 1000 x 1250 x 1500
0.5 3.93
0.6 4.71
0.7 5.50
0.8 6.28
1.0 7.85
1.2 9.42
1.6 13.44
2.0 15.70
2.5 19.63
3.0 23.55
3.2 25.12
GALVANISED SHEET
BS EN 10327 : 2005 DX51DZ
Thickness Weight 2000 2000 2500
(mm) (kgm2) x 1000 x 1250 x 1250
0.6 4.77
0.8 6.36
0.9 7.07
1.0 7.95
1.2 9.54
1.5 11.93
1.6 12.56
2.0 15.90
3.0 23.85
42 www.barrettsteel.com
PROFILING
OUR HIGHLY SOPHISTICATED PROFILING SOFTWARE IS
INCREASINGLY IN DEMAND: VARIOUS DESIGNS CAN BE
TRIALLED INEXPENSIVELY, WITH FINAL VERSIONS SECURELY
STORED ON OUR COMPUTERS.
No matter how complex the We use numerous profiling
shape, we can store your methods including plasma and
programme for repeated use, gas cutting. Our sophisticated
ensuring lower costs, faster computing facilities means that
turnaround time and maximum our CAD department can import
accuracy and consistency. and work with most current
industrial formats including DXF,
DWG, NC, CDC, HPGL and IGES.
www.barrettsteel.com 43
PLATES
BS EN 10029 : 1991 BS EN 10051 : 1992
BS EN 10025-2 : 2004 - S275JR / S355JR / S355J2
Thickness Weight 2000 2500 3000 3660 4000 6000 8000
(mm) (kgm2) x 1000 x 1250 x 1500 x 1830 x 2000 x 2000 x 2000
3.0 23.55
4.0 31.40
5.0 39.25
6.0 47.10
8.0 62.80
10.0 78.50
12.5 98.12
15.0 117.75
20.0 157.00
22.0 172.70
25.0 196.25
30.0 235.50
32.0 251.20
35.0 274.80
40.0 314.00
45.0 353.30
50.0 392.50
55.0 431.80
60.0 471.00
65.0 510.30
70.0 549.50
75.0 588.80
80.0 628.00
85.0 667.30
90.0 706.50
95.0 745.80
100.0 785.00
120.0 942.00
130.0 1020.00
150.0 1177.50
44 www.barrettsteel.com
PLATES CONT.
BS EN 10029 : 1991 BS EN 10051 : 1992
BS EN 10025-2 : 2004 - S275JR / S355JR / S355J2
Thickness Weight 5000 6000 8000 10000 6000 7500 9000
(mm) (kgm2) x 2500 x 2500 x 2500 x 2500 x 3000 x 3000 x 3000
3.0 23.55
4.0 31.40
5.0 39.25
6.0 47.10
8.0 62.80
10.0 78.50
12.5 98.12
15.0 117.75
20.0 157.00
22.0 172.70
25.0 196.25
30.0 235.50
32.0 251.20
35.0 274.80
40.0 314.00
45.0 353.30
50.0 392.50
55.0 431.80
60.0 471.00
65.0 510.30
70.0 549.50
75.0 588.80
80.0 628.00
85.0 667.30
90.0 706.50
95.0 745.80
100.0 785.00
120.0 942.00
130.0 1020.00
150.0 1177.50
www.barrettsteel.com 45
SQUARE ERW TUBE
BS 6323 : PART 5 : 1982 ERW 1 KM /
BS EN 10305-3 : 2002 E220
Size Wall Thickness (mm)
(mm) 0.7 0.8 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0
8x8
9x9
10 x 10
12 x 12
12.7 x 12.7
15 x 15
15.8 x 15.8
18 x 18
19.05 x 19.05
20 x 20
22 x 22
22.2 x 22.2
25 x 25
25.4 x 25.4
28.6 x 28.6
30 x 30
31.7 x 31.7
35 x 35
38.1 x 38.1
40 x 40
45 x 45
50 x 50
50.8 x 50.8
60 x 60
70 x 70
80 x 80
90 x 90
100 x 100
46 www.barrettsteel.com
CIRCULAR ERW TUBE
BS 6323 : PART 5 : 1982 ERW 1 KM /
BS EN 10305-3 : 2002 E220
Size Wall Thickness (mm)
(mm) 0.7 0.8 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0
8.00
9.52
10.00
11.00
12.00
12.70
13.00
14.00
15.00
15.80
16.00
17.40
18.00
19.05
20.00
20.80
21.00
22.00
22.20
24.00
25.00
25.40
26.90
27.00
28.00
28.60
29.00
30.00
31.70
32.00
33.70
34.90
Continued over
www.barrettsteel.com 47
CIRCULAR ERW TUBE CONT.
BS 6323 : PART 5 : 1982 ERW 1 KM /
BS EN 10305-3 : 2002 E220
Size Wall Thickness (mm)
(mm) 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0
35.00
36.00
38.10
40.00
41.00
41.27
42.00
42.40
44.00
44.45
45.00
46.00
47.00
47.60
48.00
50.00
50.80
54.00
57.15
60.00
60.30
63.50
70.00
76.20
88.90
93.00
101.60
108.00
114.30
127.00
133.00
139.70
48 www.barrettsteel.com
RECTANGULAR ERW TUBE
BS 6323 : PART 5 : 1982 ERW 1 KM /
BS EN 10305-3 : 2002 E220
Size Wall Thickness (mm)
(mm) 0.7 0.8 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0
12 x 8
20 x 10
20 x 15
25 x 10
25 x 15
25.4 x 12.7
30 x 10
30 x 15
30 x 20
30 x 25
31.7 x 15.8
34.15 x 15
34.9 x 15.8
35 x 15
35 x 20
35 x 25
38.1 x 12.7
38.1 x 19.05
38.1 x 25.4
40 x 10
40 x 15
40 x 20
40 x 25
40 x 30
44.4 x 15.8
45 x 15
45 x 20
45 x 25
50 x 10
50 x 20
50 x 25
50 x 30
50 x 34
50 x 35
50 x 40
www.barrettsteel.com 49
RECTANGULAR ERW TUBE CONT.
BS 6323 : PART 5 : 1982 ERW 1 KM /
BS EN 10305-3 : 2002 E220
Size Wall Thickness (mm)
(mm) 1.2 1.5 1.6 2.0 2.5 3.0
50.8 x 25.4
55 x 30
57.15 x 31.75
60 x 15
60 x 20
60 x 25
60 x 30
60 x 40
63.5 x 25.4
63.5 x 38.1
70 x 25
70 x 30
70 x 40
70 x 50
70 x 65
76.2 x 25.4
76.2 x 38.1
76.2 x 50.8
80 x 20
80 x 25
80 x 30
80 x 35
80 x 40
80 x 60
88.9 x 38.1
100 x 25
100 x 30
100 x 34
100 x 40
100 x 50
100 x 60
120 x 40
120 x 60
120 x 80
150 x 50
50 www.barrettsteel.com
FASTEC HANDRAIL SYSTEM
REVOLUTIONARY STAINLESS STEEL
MODULAR HANDRAIL SYSTEM
Fastec Handrail Systems specialise in the supply and delivery of
off-the-shelf stainless steel modular handrail fittings.
G316 G316’s’
www.barrettsteel.com 51
Fittings
Mirror Polished
Glass Clamps
Wiretec
Timbertec
52 www.barrettsteel.com
Glasstec
Accessories
Ask us for a
copy of our
Brochure
www.barrettsteel.com 53
WELDED MESH
Welded Mesh is available either self colour or galvanised.
Weights quoted are for self colour and are approximate.
54 www.barrettsteel.com
WELDED MESH CONT.
Welded Mesh is available either self colour or galvanised.
Weights quoted are for self colour and are approximate.
www.barrettsteel.com 55
HANDRAILS & WALKWAYS
HANDRAILS
Our handrails systems are suitable Typical applications include:
for use in all types of industry. They • Platforms
are ideal for any internal or external • Mezzanines
area requiring a stable edge • Stairways
protection barrier as well as where • Gantries
protection is needed against
stationary or moving machinery.
TUBECLAMPS
Our comprehensive range of and have been manufactured with
fittings means that tubeclamps can ease of use very much in mind. No
be used both temporarily and welding, no bending, no threading.
permanently. Our tubeclamps are Just a hexagonal key is needed to
iron casted with a galvanised finish join the tubing together.
FLOORING
When choosing a flooring product We have taken these into account
for your project there are a number when developing our range of
of considerations to bear in mind - flooring which offers a wide range
aesthetic requirements, of products to meet everyones’
functionality and cost implications. personal needs.
56 www.barrettsteel.com
NOMINAL BORE
BS EN 10255 : 2004
Available in self colour, black or galvanised - screwed and socketed or plain end.
www.barrettsteel.com 57
BARRETT
General Steels