Professional Documents
Culture Documents
Description
Velomitor® Piezo-velocity Sensors are designed to measure absolute
(relative to free space) bearing housing, casing, or structural vibration.
Unlike moving-coil velocity transducers, such as Bently Nevada’s
Seismoprobe® family of velocity transducers, Velomitor® transducers
BENTLY
R
incorporate a solid-state design, and are specialized piezoelectric
NEVADA
MADE IN U.S.A.
accelerometers with embedded integration electronics. Because they
VELOMITOR
R
incorporate solid-state electronics with no moving parts, they do not suffer
PN 330500 from mechanical degradation and wear, and can be mounted vertically,
100 mV/in/s
(4 mV/mm/s) horizontally, or at any other angle of orientation.
Caution
If housing measurements are being made for overall protection of the
machine, thought should be given to the usefulness of the measurement for
each application. Most common machine malfunctions (imbalance,
misalignment, etc.) originate at the rotor and cause an increase (or at least a
change) in rotor vibration. In order for any housing measurement alone to be
effective for overall machine protection, a significant amount of rotor vibration
must be faithfully transmitted to the bearing housing or machine casing, or
more specifically, to the mounting location of the transducer.
Specifications
Parameters are specified at +25±5°C (+77±9°F) unless otherwise indicated.
Note: Operation outside the specified limits will result in false readings or loss of machine monitoring.
Electrical
Maximum cable 305 metres (1,000 feet) of cable, Height: 66 mm (2.6 in)
length: BNC part number 02173006, with
no degradation of signal. Case Material: 316L stainless steel
CSA/NRTL /C: Exia for Class I, Division 1, Groups Mounting Torque: 46 kg cm (40 in-lb) max
A, B, C and D; Class II, Division 1,
Groups E, F and G; Class III, Polarity: Pin A goes positive with respect to
Division 1, when installed with an pin B when the sensor case motion
approved zener barrier per drawing is toward the connector.
103778.
9571 2 conductor (22 AWG) twisted, 46000-01 Magnetic Base for temporary
shielded cable with 2-socket plug at mounting of Velomitor Sensors.
one end, terminal lugs at the other Used with 1/4 - 28 UNF Mounting
end. Not for use with 21128 Thread Adapter.
Velocity Transducer Housing.
46122-01 Quick Connect for semi-permanent
84661 2 conductor (22 AWG) twisted, mounting of Velomitor Sensors.
shielded armored cable with 2- Used with 1/2 - 20 UNF Mounting
socket plug at one end, terminal Thread Adapter.
lugs at the other end. Not for use
with 21128 Velocity Transducer 100076-01 User Guide
Housing.
89409-01 Individual 1/2 - 20 UNF mounting
89477 2 conductor (18 AWG) twisted, adapter
shielded cable with right angle 2-
socket plug at one end, terminal 89410-01 Individual M8 x 1mounting adapter
lugs at the other end. Used with
21128 Velocity Transducer Housing. 89411-01 Individual 1/4 - 28 UNF mounting
adapter
125065 2 conductor (18 AWG) twisted,
shielded cable with 2-socket plug 89412-01 Individual 1/4 - 20 UNC mounting
and fluorosilicone elastomer boot at adapter
one end, terminal lugs at the other.
Not for use with 21128 Velocity 89413-01 Individual 1/4 - 18 NPT mounting
Transducer Housing. adapter
02173006 Bulk cable; 2 conductor (18 AWG) 04300015 Individual 5/8 - 18 UNF mounting
twisted, shielded cable without adapter
connectors or terminal lugs. Specify
number of feet. 161191 Individual 1/2 - 13 UNC mounting
adapter
Cable Part Number - Cable length option in feet:
Note: The Velomitor® Sensor is shipped with
an adapter. Individual adapters are available
Order in increments of 1.0 foot as spares.
(0.3 metres).
XXXXX - AXX 101212-01 Velomitor® Sensor connector kit.
Example: 0 9 = 9 feet (2.74 metres) Used with housings and retrofits.
1 2 = 12 feet (3.66 metres)
Minimum length 3 feet (0.9 metres). 123135-01 Velomitor Power Module
(armored):
Accessories
21128 Velocity Transducer Housing
Assembly.
Note: When using the 21128 housing, cable
part number 89477-AA is necessary to
15/16 HEX
66.0
(2.60) BENTLY R
NEVADA
MADE IN U.S.A.
R
VELOMITOR
PN 330500
100 mV/in/s
(4 mV/mm/s)
1
dB referenced to 100 Hz
-1
-2
1 10 100 1000 10000
Frequency (Hz)
100
80
Phase Lag Angle (degrees)
60
40
20
-20
1 10 100 1000 10000
Frequency (Hz)