Professional Documents
Culture Documents
n a t ional
Inte r D
g e N OTIFIE s
i
Prest Approval
e s
Bodi
Global
Recogn ly
iz
Prod uc ed
ts
1
PORTABLE PUMP
High - Volume
Pumps
iak.gr
2
www.mob
PORTABLE PUMP
High - Volume
Pumps
Mid-Range Pu
mps
DIESEL PFP-11hpHND-EM PFP-20hpHND-MR PFP-20hpKHL-MR
PFP-21hp-DSL-MR PFP-25hp-DSL-MR
3 www.mobiak.
gr
PORTABLE PUMP
High - Pressure
Pumps
PFP-20hpHND-HP PFP-20hpKHL-HP
iak.gr
4
www.mob
PORTABLE PUMP
High - Pressure
Volume Pump
s
PFP-11hpHND-FL
PFP-5hp-FL
5 www.mobiak.
gr
SKID UNIT
The Skid Unit
A tank, a live hose reel and/or crosslay, a portable fire pump and/or a compressed air
foam system (CAFS), with an engine: these can be combined into a single one-piece
assembly that can be slipped onto a truck bed, trailer, or into a body and used for flowing
water and or foam on a structural fire, car fire or wildfire.
The most common wildland and urban interface fire engines combine a small truck with a
water tank and a high performance portable pump. Municipal/industrial fire departments
and all forestry fire authorities use drop-in units. The sizes vary from 50 gallons, for an ATV,
up to 500 gallons for full size trucks.
PFP-6hpHND-M-Twin PFP-9hpHND-M-Twin
NEW EMS SKEETER SPACE PAC
iak.gr
6
www.mob
QUICK DELIVERY SKID UNIT MODELS
Econo Pac
Forest Pac
Attack Pac
SPECIFICATIONS: SPECIFICATIONS:
• Low mount c • 200 fully baffle
onfiguration d
• PFP-6hpHND-M propopylene w SPECIFICATIONS:
-Twin ater tank
fire pump • 6.5hp twin im • 200 fully baffled
• Pump capac peller fire p ropopylene wa
ity 20 gpm pump te
at 125 psi • 20 hp mid range fir r tank
• 60gpm at 10p • 265gpm at 50 e pump
• Self priming fir si, 40gpm p si, 19
e pump at 100psi and 20 at 100psi,115gp 0gpm
• Pump contro gpm m a t 150psi
l panel at125psi and 45gpm at
• 60 gallon wate • 3 gallon fuel ta 20 0p si
r tank • 1.5 gallons inte
• Manual rewin grated • Lighted contr nk
• 100’ x 5/8” bo
d hose reel fuel tank • Low profile eleol panel
oster hose • Lighted contr ctric rewind
• Forestry nozzle ol panel hose reel
• Low profile ele • 1 inch x 100 fo
• 1.5” inlet with ctric ot booster
cap and re wind hose reel hose
chain • 1 inch x 100 fo • 2.5 inch tank
to
• 1.5” outlet with hose
ot booster turn ball valve pump 1/4
cap • Steel manifold
and chain • 2.5 inch tank with multiple
• 1” valve for h to pump outlets
ose reel 1/4 turn ball va • 1.5 inch servic
lve e
• 1” valve for ta
nk fill / • M ultiple outlets m cap and chain line with
recirculating a n ifo ld • 3/4 inch press
• 1.5 inch servic u
• 3/4” polyprop with cap and c
e line garden hose corized
ylene hain nnection
platform with u
nder
lifting area OPTIONS:
OPTIONS:
• Increase wate
r
• Increase wate
r tank hose reel sizes tank and
and hose reel siz • Diesel engine
es a
• Pre-connect • Pre-connect hovailable
hose tray connection se tray with
with connectio
n • Set of chrome
• Set of chrome outriggers
outriggers with 3 ways rolle
with 3 ways rolle
rs • Scotty around rs
• Scotty around
the pump foam system wthe pump
integrated foam ith
foam system w
ith • Storage fram cell
integrated foam e
cell • Stainless stee
• Storage fram
e • Also availablel piping
• And many m with CAFS
ore systems
• And many m
7 ore
www.mobiak.
gr
QUICK DELIVERY SKID UNIT MODELS
Ready Pac
SPECIFICATIONS:
• 200 fully baffl SPECIFICATIONS:
ed
propopylene w • 75 fully baffle
ater tank d
• 6.5hp twin im propopylene w SPECIFICATIONS:
peller fire ater tank
pump • 6.5hp twin im
• 60gpm at 10p peller fire •Modular config
si, 40gpm at pump uration
100psi and 20g • CET Piston Typ
pm at 125psi • 60gpm at 10p e High
• 1.5 gallons inte si, 40gpm Pressure Pump
grated fuel at 100psi and 20
tank gpm at • 11 GPM
125psi
• Lighted contr • 1450 P.S.I.
ol panel • 1.5 gallons inte
• Pre-connect h grated • 16hp Briggs a
ose tray with fuel tank nd Stratton
connection • Lighted contr En g in e with integrated
• 2.5 inch tank ol panel G a s Ta n
to pump 1/4 • 1.5 inch tank k
to pump • Self-Priming
turn ball valve 1/4 turn ball va
• Multiple outle lve • 1.5 Gallon Fue
ts manifold • Multiple outle l Tank Triple
• 1.5 inch servic ts manifold Use Discharge
e line with • 1.5 inch and 1 Gun. Fog,
cap and chain inch service Jet, Atomized
lines with
• Manual Hose
cap and chain reel with
OPTIONS: • Stoke(s) bask 150’ High Pressu
et area re Hose
• 1” Inlet
• Low profile ele • Open storage
ctric rewind • Custom Pump
hose reel compartment Panel
• High Strength
• 1 inch x 100 fo • En c losed storage Ep oxy
ot booster treated frame
hose compartment
•Automatic ac
• Increase wate celeration
r tank and OPTIONS: m o to r p u m p system
hose reel sizes • Auxiliary outle
• Set of chrome • Low profile elec t in the
outriggers tric control panel to
with 3 ways rolle rewind hose ree connect
rs l a se c o n d lin
• Scotty around • 0.75 inch x 10 e
the pump 0 foot
foam system w booster hose
ith OPTIONS:
integrated foam • Set of chrom
cell e o utriggers
• Storage frame with 3 way rolle • High Pressure
rs Foam
• And many mo • Scotty around Proportioner
re the pump
foam system w • Electric rewin
ith d Hose reel
integrated foam • Water Tank
cell • Second Hose
• And many mo reel or
re
loose High
iak.gr
8 • Pressure Hose
www.mob
FOAM TRAILER
MOBIAK S.A presents a variety of foam trailers from 150 to 2,000 gallons. These versatile
trailers are ideal for use in industrial, commercial, municipal and forestry envi-
ronments.
Foam trailers provide a very effective tool for airport fuel storage and power plant
installations.
A & B FOAM TRAILER WITH SINGLE TOTE FOAM TRAILER DUAL TOTES FOAM TRAILER
TWO (2) MONITORS
SPECIFICATIONS:
WHY DO YOU NEED FOAM?
• Heavy Duty Single and Multiple Axle Trailer
• Foam is needed for any fire or spill involving
• DOT Compliant and Road Ready
flammable or combustible solids or liquids
• Stainless Steel Manifolds and Piping
• Water will not float on hydrocarbon products
• Fire Grade Ball Valves
such as gasoline or diesel fuel.
• Polypropylene Tanks
• Water used on a fire in a contained area may
• Polypropylene Compartments
sink, runoff or overflow.
• Fire Pump Choices
• Foam reduces toxic and flammable vapors
• Scene Light (Optional)
given off by fuels.
• Non-Slip Surfaces
• NFPA Compliant (Where Applicable)
• Other Options Available
9 www.mobiak.
gr
CAFS
1. Class A foam allow faster fire supression and axtinguishment than plain water.
2. Foam clings to most surfaces and protects exposures much longer than plain water.
3. Class A foam may provide long-term cost savings and may reduce property damage.
4. Class A foam increases efficiency and conservation of water supply.
5. Class A foam can be produced at a relatively low cost.
6. Class A foam forms a protective blanket.
7. Foam is visible during and after application.
8. CAFS attack lines are lighter than plain water hose lines.
9. Foam use may help to preserve evidence of fire cause.
10. Class A foam aids wildland/urban interface attack.
iak.gr
10
www.mob
CAFS
TYPO 35 CFM TYPO 35 CFM ADVANTAGE 60 CFM
GAS - POWDERED CAFS SYSTEM DIESEL - POWDERED CAFS SYSTEM GAS - POWDERED CAFS SYSTEM
Engine Engine
27 HP Kohler gas engine 25 HP Kubota diesel engine Engine
at 3600 RPM at 3600 RPM 38 HP Kohler gas engine
at 3600 RPM
Water Pump Water Pump
160 GPM at 100 PSI 140 GPM at 100 PSI Water Pump
130 GPM at 125 PSI
Air Compressor Air Compressor
35 CfM at 100 PSI of air at 35 CfM at 100 PSI of air at Air Compressor
maximum engine RPM 60 CfM at 125 PSI of air at
maximum engine RPM
maximum engine RPM
Length
Length 43” length x 44” width x 33
34” length x 44” width x height Length
40 3/4” height 40” length x 48” width x
Weight 48” height
Weight 800 lb
650 lb Weight
1.250 lb
Engine Engine
44 HP Kubota diesel engine at Engine
32 HP Kubota diesel engine at 60 HP Kohler gas engine
3000 RPM 3000 RPM
at 3000 RPM
Water Pump Water Pump
170 GPM at 125 PSI Water Pump
130 GPM at 125 PSI 200 GPM at 100 PSI
Air Compressor Air Compressor
80 CfM at 125 PSI of air at Air Compressor
60 CfM at 125 PSI of air at 150 CfM at 125 PSI of air
maximum engine RPM maximum engine RPM
at maximum engine RPM
Length Length
48” length x 48” width x 49 Length
48” length x 48” width x 49 48” length x 48” width x
height height
46” height
Weight Weight
1.500 lb 1.800 lb 11 Weight www.mobiak.
1.200 lb gr
MONITORS
Carbon Steel
Monitors
iak.gr
12
www.mob
MONITORS
Carbon Steel
Monitors
MODEL: VARUN 313 MODEL VARUN: 413
13 www.mobiak.
gr
MONITORS
Carbon Steel
Monitors
• NOMINAL SIZE: 4 Inch (100 MM) • NOMINAL SIZE: 3 Inch (80 MM)
• MAX. SERVICE PRESSURE: 175 PSI (12 Bar) • MAX. SERVICE PRESSURE: 200 PSI (14 Bar)
• MAXIMUM FLOW: 2000 GPM (7570 LPM) • MAXIMUM FLOW: 1000 GPM (3800 LPM)
• FACTORY HYDROSTATIC TEST PRESSURE: 35 Bar (500 PSI) • FACTORY HYDROSTATIC TEST PRESSURE: 35 Bar (500 PSI)
• SWIVEL JOINT: Bronze to IS:318 / ASTM B 62 with double • SWIVEL JOINT: Bronze to IS:318 / ASTM B 62 with double
row of Stainless Steel Ball Bearing and Grease Fittings row of Stainless Steel Ball Bearing and Grease Fittings
• NOZZLE THRUST REACTION IN Kg.: Flow in LPM X • NOZZLE THRUST REACTION IN Kg.: Flow in LPM
√Pressure in Kg./sq.cm. X 0.0228 X √Pressure in Kg./sq.cm. X 0.0228
• INLET CONNECTION: 4” OR 6” (100 OR 150NB) • INLET CONNECTION: 3” OR 4” (80 NB OR 100 NB)
Flange to ANSI B16.24 #150, F.F. Flange to ANSI B16.5 #150, F.F.
• OUTLET CONNECTION: 4” BSP (M) • OUTLET CONNECTION: 3” BSP (M) or 2-1/2” BSP (M)
• MONITOR ELEVATION: 90 Deg. above horizontal or 2.5 NH
& 65 Deg. below horizontal • MONITOR ELEVATION: 90 Deg. above horizontal
• MONITOR ROTATION: 360 Deg. continuous & 45 Deg. below horizontal and optional 85 Deg.
• MONITOR MOVEMENT: Hand wheel driven fully above horizontal & 0 or 15 or 30 Deg. below
enclosed worm gear horizontal
• FINISH: Red Polyurethane • MONITOR ROTATION: 360 Deg. continuous
• WEIGHT (Approx) 92 Kg • MONITOR MOVEMENT: Manual
• ORDERING INFORMATION: Specify Monitor • FINISH: Red RAL 3000
Model and Inlet Flange Size • WEIGHT: (Approx) 33 Kg
• APPROVAL: FM Approved • ORDERING INFORMATION: Specify Monitor
Model, Inlet Flange Size and outlet connection
iak.gr
14
www.mob
MONITORS
Carbon Steel
Monitors
• NOMINAL SIZE: 4 Inch (100 MM) • NOMINAL: SIZE 2.5 Inch (65 MM) • NOMINAL SIZE: 3 Inch (80 MM)
• MAX. SERVICE PRESSURE: 175 PSI (12 Bar) • MAX. SERVICE PRESSURE: 175 PSI (12 Bar • MAX. SERVICE PRESSURE: 175 PSI (12 Bar)
• NOZZLE MODEL: VARSHA H4 Fix flow self inducting • MAXIMUM FLOW: 600 GPM (2270 LPM) • MAXIMUM FLOW: 800 GPM (3030 LPM)
VARSHA H4V Variable flow self inducting • FACTORY HYDROSTATIC TEST PRESSURE: • FACTORY HYDROSTATIC TEST PRESSURE:
H4 - 500 GPM 35 Bar (500 PSI) 35 Bar (500 PSI)
H4 - 750 GPM • SWIVEL JOINT: Stainless Steel with Double • SWIVEL JOINT: Stainless Steel with double
H4 - 1000 GPM row ball row of Ball Bearing and Grease Fittings
H4V - 500-750 GPM Bearing and Grease Fittings • NOZZLE THRUST REACTION IN Kg.:
H4V - 750-1000 GPM • NOZZLE THRUST REACTION IN Kg.: Flow in LPM X Flow in LPM X √Pressurein Kg./sq.cm.
H4V - 500-1000 GPM √Pressure Kg./sq.cm. X 0.0228 X 0.0228
H4V - 500-750-1000 GPM • INLET CONNECTION: 2.5”, 3” OR 4” (65, 80, • INLET CONNECTION: 3” OR 4” (80
• INDUCTION RATE: 3% (3 to 3.9%) OR 100NB) OR 100NB)
• FACTORY HYDRO TEST PRESSURE: 350 PSI (25 Bar) Flange to ANSI B16.5 # 150, R.F. Flange to ANSI B 16.5 # 150, R.F.
• MATERIAL: STAINLESS STEEL • OUTLET CONNECTION: 2.5” BSP (M) • OUTLET CONNECTION: 3” BSP (M)
• OPTIONAL SUPPLY: Pressure Guage • MONITOR ELEVATION: 90 Deg. above • MONITOR ELEVATION: 90 Deg.
• NOZZLE THRUST REACTION IN KG.: Flow in LPM X horizontal& 45 Deg. below horizontal above horizontal& 45 Deg. below
√Pressure in Kg./sq.cm. X 0.0228 • MONITOR ROTATION: 360 Deg. continuous horizontal
• INLET CONNECTION: 4” OR 6” (100 or 150 NB) • MONITOR MOVEMENT: Handle with twist lock • MONITOR ROTATION: 360 Deg.
Flange to ANSI B16.5 #150, R.F. • FINISH: Red RAL 3000 continuous
• END CONNECTION: 4” BSP Monitor & Nozzle • WEIGHT: ( Approx) 31 Kg • MONITOR MOVEMENT: Handle with
• PICKUP TUBE: Clear PVC, Sprial wound • ORDERING INFORMATION: Specify Monitor twist lock
with SS dip Tube Model and Inlet Flange Size • FINISH: Red RAL 3000
• MONITOR ELEVATION: 90 Deg. above • WEIGHT: (Approx) 36 Kg
horizontal & 65 Deg. below horizontal • ORDERING INFORMATION: Specify
• MONITOR ROTATION: 360 Deg. continuous Monitor
• MONITOR: Double hand wheel driven Model and Inlet Flange Size
• MOVEMENT: enclosed worm gear • APPROVAL: FM Approved
• APPROVAL: UL Listed
• FINISH: Red RAL 3000 Standard supply
Optional -As per customer requirement
• MONITOR WEIGHT: With H4 Nozzle 77.5 Kg
With H4V Nozzle 79.5 Kg
• ORDERING INFORMATION: Specify
(i) Monitor model & inlet size
(ii) Nozzle model & flow
(iii) Material specification
15 www.mobiak.
gr
MONITORS
Carbon Steel
Monitors
• NOMINAL SIZE: 3 Inch (75 MM) • NOMINAL SIZE: 3 Inch (75 MM) • NOMINAL SIZE: 6 Inch (150 NB)
• MAX. SERVICE PRESSURE: 175 PSI (12 Bar) • MAX. SERVICE PRESSURE: 175 PSI (12 Bar) • MAX. SERVICE PRESSURE: 175 PSI (12 Bar)
• MAXIMUM FLOW: 800 GPM (3030 LPM) • MAXIMUM FLOW: 800 GPM (3030 LPM) • MAXIMUM FLOW: 3300 GPM (12500 LPM)
• FACTORY HYDROSTATIC TEST PRESSURE: • FACTORY HYDROSTATIC TEST PRESSURE: • FACTORY HYDROSTATIC TEST PRESSURE:
500 PSI (34.3 Bar) 35 Bar (500 PSI) 500 PSI (34.3 LPM)
• SWIVEL JOINT: Bronze to IS 318 / ASTM B 62 with • SWIVEL JOINT: Bronze to IS 318 / ASTM B62 with • SWIVEL JOINT: Bronze to IS 318 / ASTM
Double row of Stainless Steel Ball Bearing and double row of Stainless Steel Ball Bearing and B 62 with double row of Ball Bearing
Grease Fittings Grease Fittings with Grease Fittings
• NOZZLE THRUST REACTION IN Kg.: Flow in LPM • NOZZLE THRUST REACTION IN Kg.: Flow in LPM • NOZZLE THRUST REACTION IN KG.: Flow in LPM
X Pressure in Kg./sq.cm. X 0.0228 X Pressure in Kg./sq.cm. X 0.0228 X Pressure in Kg./sq.cm. X 0.0228
• INLET CONNECTION: 3” OR 4” (80 OR 100 NB) • INLET CONNECTION: 4” OR 6” (100 OR 150NB) • INLET CONNECTION: 6” (150NB) Flange to
Flange to ANSI B16.5 # 150, R.F. Flange to ANSI B16.5 #150, R.F. ANSI B16.5 #150, R.F.
• OUTLET CONNECTION: 3” BSP (M) • OUTLET CONNECTION: 3” BSP (M) • OUTLET CONNECTION: 6” (150NB) Flange to
• MONITOR ELEVATION: 90 Deg. above • MONITOR ELEVATION: 90 Deg. above ANSI B16.5 #150, R.F.
horizontal & 45 Deg. below horizontal horizontal & 65 Deg. below horizontal • MONITOR ELEVATION: 90 Deg. above
• MONITOR ROTATION: 360 Deg. continuous • MONITOR ROTATION: 360 Deg. continuous horizontal & 65 Deg. below horizontal
• MONITOR MOVEMENT: Hand wheel driven • MONITOR MOVEMENT: Hand wheel driven • MONITOR ROTATION: 360 Deg. continuous
worm gear fully enclosed fully enclosed worm gear • MONITOR MOVEMENT: Hand wheel driven
• FINISH: Red RAL 3000 • FINISH: Red RAL 3000 fully enclosed worm gear
• WEIGHT: 45 Kg • WEIGHT: (Approx) 42 Kg • FINISH: Red RAL 3000
• ORDERING INFORMATION: Specify Monitor • ORDERING INFORMATION: Specify Monitor • WEIGHT: 241 Kg
Model and Inlet Flange Size Model Inlet Flange Size and Pressure • ORDERING INFORMATION: Specify Monitor
Gauge(optional) Model and Inlet Flange Size
iak.gr
16
www.mob
DELUGE VALVES
Deluge Valves are automatic reset or field manual reset type. The valves are intended for
use in deluge, pre-action, foam water system and many more fire protection applications.
All valves are epoxy painted internally & externally.
All Deluge valves come with one or a combination of following actuation trims
Deluge Valve
Deluge Valve
17
INTEGRATED SYSTEMS & VALVES
Gate Valves
• OS&Y and NRS resilient Wedge Gate
valves
• Rated f or maximum 21 bar (300 PSI)
operati ng pressure
• Size : 50 to 300 mm (2” to 12”)
• UL Listed and FM Approved
18
ALARM VALVES & SPRINKLERS
ALARM VALVE
S
Alarm Check Valves are used to actuate local and remote alarm in automatic sprinkler
systems. HD Alarm Valves come with constant pressure or variable pressure trims.
Alarm Valve
Pressure Gauges
19
ALARM VALVES & SPRINKLERS
SPRINKLERS
SPRINKLER AC
CESSORIES
20
20
WATER SPRAY NOZZLES
• Model - WC & WCS – Water Curtain Nozzle with ½” & ¾” end connection
• 21 with ½” end connection
Model - TC & TCS – Tank Cooling Nozzle
• Various K-factor from K-23 to K-140
• Brass / Stainless Steel material
21
Reverse Action Water Spray Nozzles
Revolving Nozzle
22
FOAM PRODUCTS
FOAM DISCHA
RGE DEVICES
Foam Chamber
• 5 sizes
• Flow from 100 to 4000 LPM (26 to 1056 GPM)
• Carbon Steel or Stainless Steel material
• Working pressure 2.8 to 7 Bar (40 to 100 PSI)
• Epoxy painted from inside and outside
• Supplied with Stainless Steel orifice plate
• Frangible glass vapour seal
• Choice of various deflectors
• Handheld
• Fixed installations, Flanged
• Bund Pourer, Flanged
• Flow from 135 to 1900 LPM (35 to 500 GPM)
• Expansion 1:50
23
FOAM PROPORTIONERS
BLADDER TAN
K PROPORTIO
NING SYSTEM
Ratio Controller
• Size: 65 to 200 NB
• Flow: 160 to 18500 LPM (42 to 4895 GPM)
• 3 or 6% induction rate
• Maximum working pressure 14 Bar (200 PSI)
• Used with Bladder and inline balance
pressure proportioning system
• Suitable for all types of foam concentrates
• Stainless Steel / Bronze Material
• UL Listed
24
Foam Concentrate Control Valve
25
FIRE HYDRANT DRY-BARREL, 250PSI
Fe atures Construction
MATERIALS LIST
26
FIRE HOSE
TA Series
1” 25 15/225,17/250 45/675,51/750
1-1/4” 32 15/225,17/250 45/675,51/750
1-1/2” 38 15/225,17/250 45/675,51/750
1-3/4” 45 15/225,17/250 45/675,51/750
2” 52 15/225,17/250 45/675,51/750
2-1/2” 64 15/225,17/250 45/675,51/750
The Fire Hose-TA 2-3/4” 70 15/225,17/250 45/675,51/750
jacketed prod is an all polyester single 3” 75 15/225,17/250 45/675,51/750
uct. It is of lig
and compact ht weight 4” 102 10/150,13/200 30/450,39/600
, approximat
weight of sta ely half the 5” 127 8/125,10/150 24/375,30/450
ndard rubber
jacket hose. lined single 6” 152 8/125,10/150 24/375,30/450
It is highly resis
tant to ozone,
and lightweigh abrasion
t,
perature perfo outstanding low tem-
rmance, exce
chanical prop llent me-
er
and elasticity ties, high tear strength
-similar to ru
transparency, bber, high
as well as go
grease resista od oil and
nce.
The liner proces
s produces an
thin but smoo amazingly
th inner water
an extremely lo way COUPLINGS AVAILABLE
w friction loss fo , yielding
flow. r maximum
Storz couplings & BS instantane-
ous couplings & Italy couplings or
other type on your request.
APPLICATION
• Industrial and municipal fire brigades
• Military
• Marine fire fighting CONSTRUCTION
• Interior rack and reel hose
• Commercial and civil engineering Single jacket, 100% high tensile
strength virgin polyester filament
yarns, both warp and filler; Smooth
COLOR TPU liner ensures the minimum friction
for maximum flow.
The standard color for Fire Hose-
TA is white. Other colors available with
our innovative Wisentec™ abrasion
resistant coatings are red, yel-
low, orange, blue, green and tan. TPU Liner
Color will be uniform throughout Polyester Single Jacket
the length of each hose. Cost for
color coating is additional.
STANDARD LENGTH
20m, 25m, 30m, 40m.
Other length on your request.
27 www.mobiak.
gr
FIRE HOSE
TB Series
1” 25 15/225,17/250 45/675,51/750
1-1/4” 32 15/225,17/250 45/675,51/750
1-1/2” 38 15/225,17/250 45/675,51/750
1-3/4” 45 15/225,17/250 45/675,51/750
The Fire Hose-TB is an all polyester single 2” 52 15/225,17/250 45/675,51/750
jacketed product. It is of light weight and 2-1/2” 64 15/225,17/250 45/675,51/750
compact, approximately half the weigh 2-3/4” 70 15/225,17/250 45/675,51/750
t 3” 75 15/225,17/250 45/675,51/750
of standard rubber lined single jacket hose.
It is highly resistant to most chemicals, petro 4” 102 10/150,13/200 30/450,39/600
l 5” 127 8/125,10/150 24/375,30/450
products, ozone & U.V. exposure, hydroly-
sis, and rot & mildew. 6” 152 8/125,10/150 24/375,30/450
The liner process produces an amazingly
thin but smooth inner waterway, yielding
an extremely low friction loss for maximum
flow.
COUPLINGS AVAILABLE
Storz couplings & BS instantane-
ous couplings & Italy couplings or
other type on your request.
APPLICATION
• Industrial and municipal fire brigades CONSTRUCTION
• Military
• Marine fire fighting Single jacket, 100% high tensile
• Interior rack and reel hose strength virgin polyester filament
• Commercial and civil engineering yarns, both warp and filler; High
grade EPDM liner, cold flexible,
suitable also for hot water, excel-
COLOR lent resistance to sea water, UV
and ozone.
The standard color for Fire Hose-
TA is white. Other colors available with
our innovative Wisentec™ abrasion
resistant coatings are red, yel-
low, orange, blue, green and tan.
Color will be uniform throughout
the length of each hose. Cost for EPDM Liner
color coating is additional.
Polyester Single Jacket
STANDARD LENGTH
20m, 25m, 30m, 40m.
Other length on your request.
iak.gr
28
www.mob
FIRE HOSE
TM Series
1” 25 15/225,17/250 45/675,51/750
1-1/4” 32 15/225,17/250 45/675,51/750
1-1/2” 38 15/225,17/250 45/675,51/750
1-3/4” 45 15/225,17/250 45/675,51/750
The Fire Hose-TM is an all polyester single 2” 52 15/225,17/250 45/675,51/750
jacketed product. It is of light weight and 2-1/2” 64 15/225,17/250 45/675,51/750
compact, approximately half the weigh 2-3/4” 70 15/225,17/250 45/675,51/750
t 3” 75 15/225,17/250 45/675,51/750
of standard rubber lined single jacket hose.
It is light weight, good flexibility, high 4” 102 10/150,13/200 30/450,39/600
elasticity and flexibility. 5” 127 8/125,10/150 24/375,30/450
The liner process produces an amazingly 6” 152 8/125,10/150 24/375,30/450
thin but smooth inner waterway, yielding
an extremely low friction loss for maximum
flow.
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or
other type on your request.
APPLICATION
• Industrial and municipal fire brigades CONSTRUCTION
• Military
• Marine fire fighting Single jacket, 100% high tensile
• Interior rack and reel hose strength virgin polyester filament
• Commercial and civil engineering yarns, both warp and filler; Smooth
PVC liner ensures the minimum
friction for maximum flow.
COLOR
The standard color for Fire Hose-TM
is white. Other colors available with
our innovative Wisentec™ abra-
sion resistant coatings are red, yel-
low, orange, blue, green and tan.
Color will be uniform throughout
the length of each hose. Cost for PVC Liner
color coating is additional.
Polyester Single Jacket
STANDARD LENGTH
20m, 25m, 30m, 40m.
Other length on your request.
29 www.mobiak.
gr
FIRE HOSE
TN Series
1” 25 13/200,16/250 39/600,48/750
1-1/4” 32 13/200,16/250 39/600,48/750
1-1/2” 38 13/200,16/250 39/600,48/750
1-3/4” 45 13/200,16/250 39/600,48/750
The jacket shall be evenly 2” 52 13/200,16/250 39/600,48/750
and firmly wo- 2-1/2” 64 13/200,16/250 39/600,48/750
ven and free from visible
defects, thread 2-3/4” 70 13/200,16/250 39/600,48/750
knots, lumps and irregular
ities of twist. The 3” 75 13/200,16/250 39/600,48/750
warp and filler will be high
strength, 4” 102 13/200,16/250 39/600,48/750
low elongation polyester
yarns. The jack- 5” 127 6/95,8/125 18/285,24/375
et is matched to assure
a precision fit to 6” 152 6/95,8/125 18/285,24/375
meet precise hydrostatic
test require-
ments. Jacket is plain or twil
l woven.
It is highly resistant to ozone,
abrasion and
lightweight, outstanding
low tempera-
ture performance, excelle
nt mechanical
properties, high tear strengt
h and elastic-
ity-similar to rubber, high tran
sparency, as
well as good oil and grease
resistance.
The liner process produc
es an amazingly
thin but smooth inner wa
terway, yielding COUPLINGS AVAILABLE
an extremely low friction loss
for maximum
flow. Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
CONSTRUCTION
APPLICATION Single jacket, 100% high tensile
strength virgin polyester filament
Industrial Hose-TN is used for con- yarns, both warp and filler; Smooth
struction pumps, pump water dis- TPU liner ensures the minimum
charge, wash down service on ships friction for maximum flow.
and in factories, plant clean up, agri-
culture and more.
COLOR
TPU Liner
The standard color for Industri-
al Hose-TN is white. Other colors Polyester Single Jacket
available with our innovative
Wisentec™ abrasion resistant
coatings are red, yellow, orange,
blue, green and tan. Provides
water repellency, abrasion, oil
and chemical resistance. Color STANDARD LENGTH
will be uniform throughout the
length of each hose. The cost for 20m, 25m, 30m, 40m.
color coating is additional. Other length on your request.
iak.gr
30
www.mob
INDUSTRIAL HOSE
TX Series
1” 25 13/200,16/250 39/600,48/750
1-1/4” 32 13/200,16/250 39/600,48/750
1-1/2” 38 13/200,16/250 39/600,48/750
1-3/4” 45 13/200,16/250 39/600,48/750
The jacket shall be evenly 2” 52 13/200,16/250 39/600,48/750
and firmly wo-
ven and free from visible 2-1/2” 64 13/200,16/250 39/600,48/750
defects, thread
knots, lumps and irregular 2-3/4” 70 13/200,16/250 39/600,48/750
ities of twist. The
warp and filler will be high 3” 75 13/200,16/250 39/600,48/750
strength, low
elongation polyester yarns. 4” 102 13/200,16/250 39/600,48/750
The jacket is matched to 5” 127 6/95,8/125 18/285,24/375
assure a preci-
sion fit to meet precise hyd 6” 152 6/95,8/125 18/285,24/375
rostatic test re-
quirements. Jacket is plain
or twill woven.
It is highly resistant to mo
st chemicals,
petrol products, ozone &
UV exposure, hy-
drolysis, and rot & mildew.
The liner process produc
es an amazingly
thin but smooth inner wa
terway, yielding
an extremely low friction loss
for maximum
flow.
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
CONSTRUCTION
APPLICATION Single jacket, 100% high tensile
strength virgin polyester filament
Industrial Hose-TX is used for con- yarns, both warp and filler; High
struction pumps, pump water grade EPDM as inner lining, cold
discharge, wash down service flexible, suitable also for hot water,
on ships and in factories, plant excellent resistance to sea water,
clean up, agriculture and more. UV and ozone.
COLOR
The standard color for Industrial EPDM Liner
Hose-TX is white. Other colors Polyester Single Jacket
available with our innovative
Wisentec™ abrasion resistant
coatings are red, yellow, orange,
blue, green and tan. Provides
water repellency, abrasion, oil
and chemical resistance. Color STANDARD LENGTH
will be uniform throughout the
length of each hose. The cost for 20m, 25m, 30m, 40m.
color coating is additional. Other length on your request.
31 www.mobiak.
gr
INDUSTRIAL HOSE
TG Series
1” 25 13/200,16/250 39/600,48/750
1-1/4” 32 13/200,16/250 39/600,48/750
1-1/2” 38 13/200,16/250 39/600,48/750
1-3/4” 45 13/200,16/250 39/600,48/750
The jacket shall be evenly 2” 52 13/200,16/250 39/600,48/750
and firmly wo- 2-1/2” 64 13/200,16/250 39/600,48/750
ven and free from visible
defects, thread 2-3/4” 70 13/200,16/250 39/600,48/750
knots, lumps and irregular
ities of twist. The 3” 75 13/200,16/250 39/600,48/750
warp and filler will be high
strength, 4” 102 13/200,16/250 39/600,48/750
low elongation polyes
ter yarns. The 5” 127 6/95,8/125 18/285,24/375
jacket is matched to assu
re a precision 6” 152 6/95,8/125 18/285,24/375
fit to meet precise hydrost
atic test require-
ments. Jacket is plain or twill
woven.
It is light weight, good
flexibility, high
elasticity and flexibility.
The liner process produc
es an amazingly
thin but smooth inner wa
terway, yielding
an extremely low friction loss
for maximum
flow.
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
CONSTRUCTION
APPLICATION Single jacket, 100% high tensile
strength virgin polyester filament
Industrial Hose-TG is used for yarns, both warp and filler; Smooth
construction pumps, pump PVC liner ensures the minimum
water discharge, wash down friction for maximum flow.
service on ships and in factories,
plant clean up, agriculture and
more.
COLOR
The standard color for Industrial PVC Liner
Hose-TG is white. Other colors Polyester Single Jacket
available with our innovative
Wisentec™ abrasion resistant
coatings are red, yellow, orange,
blue, green and tan. Provides
water repellency, abrasion, oil
and chemical resistance. Color STANDARD LENGTH
will be uniform throughout the
length of each hose. The cost for 20m, 25m, 30m, 40m.
color coating is additional. Other length on your request.
iak.gr
32
www.mob
INDUSTRIAL HOSE
TL Series
1” 25 13/200,16/250 39/600,48/750
1-1/4” 32 13/200,16/250 39/600,48/750
1-1/2” 38 13/200,16/250 39/600,48/750
The jacket shall be evenly 1-3/4” 45 13/200,16/250 39/600,48/750
and firmly wo- 2” 52 13/200,16/250 39/600,48/750
ven and free from visible
defects, thread 2-1/2” 64 13/200,16/250 39/600,48/750
knots, lumps and irregular
ities of twist. The 2-3/4” 70 13/200,16/250 39/600,48/750
warp and filler will be high
strength, 3” 75 13/200,16/250 39/600,48/750
low elongation polyester
yarns. The jack- 4” 102 13/200,16/250 39/600,48/750
et is matched to assure
a precision fit to 5” 127 6/95,8/125 18/285,24/375
meet precise hydrostatic
test require- 6” 152 6/95,8/125 18/285,24/375
ments. Jacket is plain or twil
l woven.
It is highly resistant to ozone
attach, abra-
sion and lightweight, out
standing low
temperature performanc
e, excellent
mechanical properties, high
tear strength
and elasticity-similar to rub
ber, high trans-
parency, as well as good
oil and grease
resistance.
The liner process produc
es an amazingly
thin but smooth inner wa
terway, yielding COUPLINGS AVAILABLE
an extremely low friction loss
for maximum
flow. Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
CONSTRUCTION
APPLICATION Single jacket, 100% high tensile
strength virgin polyester yarns,
Industrial Hose-TL is used for polyester filament as filler and
construction pumps, pump water polyester spun as warp; Smooth
discharge, wash down service on TPU liner ensures the minimum
ships and in factories, plant clean friction for maximum flow.
up, agriculture and more.
33 www.mobiak.
gr
INDUSTRIAL HOSE
TZ Series
1” 25 13/200,16/250 39/600,48/750
1-1/4” 32 13/200,16/250 39/600,48/750
1-1/2” 38 13/200,16/250 39/600,48/750
1-3/4” 45 13/200,16/250 39/600,48/750
2” 52 13/200,16/250 39/600,48/750
2-1/2” 64 13/200,16/250 39/600,48/750
2-3/4” 70 13/200,16/250 39/600,48/750
The jacket shall be evenly
and firmly wo- 3” 75 13/200,16/250 39/600,48/750
ven and free from visible
defects, thread 4” 102 13/200,16/250 39/600,48/750
knots, lumps and irregular
ities of twist. The 5” 127 6/95,8/125 18/285,24/375
warp and filler will be high
strength, 6” 152 6/95,8/125 18/285,24/375
low elongation polyester
yarns.
The jacket is matched to
assure a preci-
sion fit to meet precise hyd
rostatic test re-
quirements. Jacket is plain
or twill woven.
It is highly resistant to mo
st chemicals,
petrol products, ozone &
UV exposure, hy-
drolysis, and rot & mildew.
The liner process produc
es an amazingly
thin but smooth inner wa
terway, yielding
an extremely low friction loss COUPLINGS AVAILABLE
for maximum
flow.
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
CONSTRUCTION
APPLICATION Single jacket, 100% high tensile
strength virgin polyester yarns,
Industrial Hose-TZ is used for polyester filament as filler and
construction pumps, pump polyester spun as warp; High
water discharge, wash down grade EPDM as inner lining, cold
service on ships and in factories, flexible, suitable also for hot water,
plant clean up, agriculture excellent resistance to sea water,
and more. UV and ozone.
COLOR
The standard color for Industrial EPDM Liner
Hose-TZ is white. Other colors
available with our innovative Polyester Single Jacket
Wisentec™ abrasion resistant
coatings are red, yellow, orange,
blue, green and tan. Provides
water repellency, abrasion, oil
and chemical resistance. Color STANDARD LENGTH
will be uniform throughout the
length of each hose. The cost for 20m, 25m, 30m, 40m.
color coating is additional. Other length on your request.
iak.gr
34
www.mob
INDUSTRIAL HOSE
TY Series
1” 25 13/200,16/250 39/600,48/750
1-1/4” 32 13/200,16/250 39/600,48/750
1-1/2” 38 13/200,16/250 39/600,48/750
1-3/4” 45 13/200,16/250 39/600,48/750
2” 52 13/200,16/250 39/600,48/750
2-1/2” 64 13/200,16/250 39/600,48/750
2-3/4” 70 13/200,16/250 39/600,48/750
The jacket shall be evenly
and firmly wo- 3” 75 13/200,16/250 39/600,48/750
ven and free from visible
defects, thread 4” 102 13/200,16/250 39/600,48/750
knots, lumps and irregular
ities of twist. The 5” 127 6/95,8/125 18/285,24/375
warp and filler will be high
strength, 6” 152 6/95,8/125 18/285,24/375
low elongation polyester
yarns. The jacket
is matched to assure a pre
cision fit to meet
precise hydrostatic test
requirements.
Jacket is plain or twill woven
.
It is light weight, good flex
ibility, high elas-
ticity and flexibility.
The liner process produc
es an amazingly
thin but smooth inner wa
terway, yielding
an extremely low friction
loss for maximum
flow. COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
CONSTRUCTION
APPLICATION Single jacket, 100% high tensile
strength virgin polyester yarns,
Industrial Hose-TY is used for polyester filament as filler and
construction pumps, pump polyester spun as warp; Smooth
water discharge, wash down PVC liner ensures the minimum
service on ships and in factories, friction for maximum flow.
plant clean up, agriculture
and more.
COLOR
The standard color for Industrial PVC Liner
Hose-TY is white. Other colors
available with our innovative Polyester Single Jacket
Wisentec™ abrasion resistant
coatings are red, yellow, orange,
blue, green and tan. Provides
water repellency, abrasion, oil
and chemical resistance. Color STANDARD LENGTH
will be uniform throughout the
length of each hose. The cost for 20m, 25m, 30m, 40m.
color coating is additional. Other length on your request.
35 www.mobiak.
gr
INDUSTRIAL HOSE
TH Series
FEATURE
PRESSURE REQUIREMENT
1” 25 13/200,16/250 39/600,48/750
1-1/4” 32 13/200,16/250 39/600,48/750
1-1/2” 38 13/200,16/250 39/600,48/750
1-3/4” 45 13/200,16/250 39/600,48/750
The jacket shall be evenly 2” 52 13/200,16/250 39/600,48/750
and firmly wo- 2-1/2” 64 13/200,16/250 39/600,48/750
ven and free from visible
defects, thread 2-3/4” 70 13/200,16/250 39/600,48/750
knots, lumps and irregular
ities of twist. The 3” 75 13/200,16/250 39/600,48/750
warp and filler will be high
strength, 4” 102 13/200,16/250 39/600,48/750
low elongation polyester
yarns. The jack- 5” 127 6/95,8/125 18/285,24/375
et is matched to assure
a precision fit to 6” 152 6/95,8/125 18/285,24/375
meet precise hydrostatic
test require-
ments. Jacket is plain or twil
l woven.
It is very flexible and resistan
t to high pres-
sure, and it is anti-wear and
anticorrosion,
light and soft, long service
life.
The liner process produces
a smooth inner
waterway, yielding an extr
emely low fric- COUPLINGS AVAILABLE
tion loss for maximum flow
.
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
CONSTRUCTION
APPLICATION Single jacket, 100% high tensile
strength virgin polyester yarns,
Industrial Hose-TH is used for polyester filament as filler and
construction pumps, pump polyester spun as warp; Smooth
water discharge, wash down Rubber liner ensures the minimum
service on ships and in factories, friction for maximum flow.
plant clean up, agriculture and
more.
COLOR
The standard color for Industrial NR Liner
Hose-TH is white. Other colors
available with our innovative Polyester Single Jacket
Wisentec™ abrasion resistant
coatings are red, yellow, orange,
blue, green and tan. Provides
water repellency, abrasion, oil
and chemical resistance. Color STANDARD LENGTH
will be uniform throughout the
length of each hose. The cost for 20m, 25m, 30m, 40m.
color coating is additional. Other length on your request.
iak.gr
36
www.mob
INDUSTRIAL HOSE
HP Series
FEATURE
PRESSURE REQUIREMENT
1” 25 8/125,10/150 24/375,30/450
1-1/4” 32 8/125,10/150 24/375,30/450
1-1/2” 38 8/125,10/150 24/375,30/450
1-3/4” 45 8/125,10/150 24/375,30/450
The Hose is an all polyes 2” 52 8/125,10/150 24/375,30/450
ter single jacket
interior protection hose 2-1/2” 64 8/125,10/150 24/375,30/450
for buildings and
plants. It is of light weight 2-3/4” 70 8/125,10/150 24/375,30/450
and compact,
approximately half the 3” 75 8/125,10/150 24/375,30/450
weight of stand-
ard rubber lined single jac 4” 102 8/125,10/150 24/375,30/450
ket hose.
It is light weight, good
flexibility, high
elasticity and flexibility.
The liner process produc
es an amazingly
thin but smooth inner wa
terway, yielding
an extremely low friction
loss for maxi-
mum flow.
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
APPLICATION CONSTRUCTION
Industrial Hose-HP is used for Single jacket, 100% high tensile
construction pumps, pump water strength virgin polyester yarns,
discharge, wash down service on twill woven; Smooth black PVC
ships and in factories, plant clean liner ensures the minimum friction
up, agriculture, interior rack & reel for maximum flow.
hose, and more.
COLOR
PVC Liner
The standard color for Industrial
Hose-HP is white. Other colors Polyester Single Jacket
available with our innovative
Wisentec™ abrasion resistant
coatings are red, yellow, orange,
blue, green and tan. Color will be
uniform throughout the length of
each hose. Cost for color coating STANDARD LENGTH
is additional.
20m, 25m, 30m, 40m.
Other length on your request.
37 www.mobiak.
gr
INDUSTRIAL HOSE
HT Series
FEATURE
PRESSURE REQUIREMENT
1” 25 13/200,16/250 39/600,48/750
The Hose is an all polyes
ter single jack- 1-1/4” 32 13/200,16/250 39/600,48/750
et interior protection hos
e for buildings 1-1/2” 38 13/200,16/250 39/600,48/750
and plants. It is of light we
ight and com- 1-3/4” 45 13/200,16/250 39/600,48/750
pact, approximately hal
f the weight 2” 52 13/200,16/250 39/600,48/750
of standard rubber line
d single jacket 2-1/2” 64 13/200,16/250 39/600,48/750
hose.
2-3/4” 70 13/200,16/250 39/600,48/750
It is light weight, good
flexibility, high 3” 75 13/200,16/250 39/600,48/750
elasticity and flexibility.
4” 102 13/200,16/250 39/600,48/750
The liner process produc
es an amaz-
ingly thin but smooth inne
r waterway,
yielding an extremely low
friction loss for
maximum flow.
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
APPLICATION
Industrial Hose-HT is used for CONSTRUCTION
construction pumps, pump water
discharge, wash down service Single jacket, 100% high tensile
on ships and in factories, plant strength virgin polyester yarns,
clean up, agriculture, interior plain woven; Smooth black PVC
rack & reel hose, and more. liner ensures the minimum friction
for maximum flow.
COLOR
The standard color for Industrial
Hose-HT Series is white. Other PVC Liner
colors available with our innovative
Wisentec™ abrasion resistant Polyester Single Jacket
coatings are red, yellow, orange,
blue, green and tan. Color will be
uniform throughout the length of
each hose. Cost for color coating STANDARD LENGTH
is additional.
20m, 25m, 30m, 40m.
Other length on your request.
iak.gr
38
www.mob
Syntec™ Industrial Hose-TS Series
TS Series
FEATURE
PRESSURE REQUIREMENT
Syntec™ Industrial Hose-S
TS Series is a I .D. Working Pressure Burst Pressure
new generation of Industr
ial hose is lined (Inch/mm) (Bar/Psi) (Bar/Psi)
with synthetic rubber and
single jacket-
ed with 100% virgin pol
yester. Different
from traditional Industrial 1” 25 10/150,14/200,17/250,21/300 31/450,42/600,51/750, 63/900
hose lined with
natural rubber, Syntec™ 1-1/2” 38 10/150,14/200,17/250,21/300 31/450,42/600,51/750, 63/900
Industrial hose
is lined with synthetic rub 1-3/4” 45 10/150,14/200,17/250,21/300 31/450,42/600,51/750, 63/900
ber which is
ozone-and ultraviolet-re 2” 52 10/150,14/200,17/250,21/300 31/450,42/600,51/750, 63/900
sistant and pro-
vides longer service life. 2-1/2” 65 10/150,14/200,17/250,21/300 31/450,42/600,51/750, 63/900
The synthetic rubber line 3” 75 10/150,14/200 31/450,42/600
r adheres to the
jacket through strong adh 4” 100 8/125,10/150 24/375,31/450
esive which
prevents delamination 5” 125 8/125,10/150 24/375,31/450
of liner from
jackets. 6” 150 5/75, 7/100 15/225, 21/300
Special superior synthe
tic rubber liner
of Syntec™ Industrial hos
e ensures Syn-
tec™ Industrial hose to
be used in as
low temperature as -58°F
(-50°C).
Compared with tradition
hose, Syntec™ Industrial
al Industrial COUPLINGS AVAILABLE
hose is more
abrasion-resistant, more
light-weighted, Storz couplings & BS instantaneous
and more compact.
Jacket is plain. couplings & Italy couplings or other
A stripe of a contrasting
color running
type on your request.
the full length of the hos
e can be wo-
ven into
the jacket.
CONSTRUCTION
Polyester single jacket, adhesive
level, synthetic rubber inner .
APPLICATION
Municipal wash down, utility de-
watering, mill discharge shipboard,
wash down and maintenance,
in-plant fire protection, and gener-
al delivery applications in industry.
Synthetic Rubber Inner
39 www.mobiak.
gr
DURABLE HOSE
UX Series
FEATURE
PRESSURE REQUIREMENT
Durable Hose-UX is a
3-ply polyure-
thane-covered and NR/
EPDM-lined or
PVClined fire hose with I .D. Working Pressure Burst Pressure
both
and liner extruded indepe the cover (Inch/mm) (Bar/Psi) (Bar/Psi)
ndently and
double vulcanized along
with high ten-
sile strength polyester rein
forcement for
maximum durability and 1” 25 14/200,16/250,21/300,28/400 42/600,48/750,63/900,84/1200
flexibility.
Ribbed light-weighted 1-1/2” 38 14/200,16/250,21/300 42/600,48/750,63/900
polyurethane
cover greatly increases 1-3/4” 45 14/200,16/250,21/300 42/600,48/750,63/900
abrasion re-
sistance, provides long 2” 52 14/20016/250,21/300 42/600,48/750,63/900
service life and
the tightly woven reinforc 2-1/2” 64 14/200,16/250,21/300 42/600,48/750,63/900
ement resists
puncture. 3” 75 14/200,16/250 42/600,48/750
UX Hose is compact and 4” 100 14/200 42/600
weather, abra-
sion and crack resistant. 5” 125 10/150 31/450
The hose is manufacture
d of circular
woven polyester fabric
completely en-
capsulated by polyureth
ane elastomer.
Hose remains flexible to
temperatures
as low as -40°F (-40°C) and
is resistant to
ozone, oxidation and mo
st chemicals or
petroleum products.
Ux Hose is easy to clean
dry after usage.
and needn’t TEMPERATURE RANGE
-40° to 150°F (-40° to 65°C).
CONSTRUCTION
APPLICATION High tenacity filament polyester
or nylon filament as warp and
• Delivery of water in self-propelled weft, PU cover and EPDM/NR/
machines for irrigation PVC liner.
• Delivery of liquid fertilizers (sludge type)
• Agricultural irrigation guns
• Supply hose
• Installations in high abrasion conditions
• Front and side pivots
• In-plant maintenance
• Washdown
• Waste and water discharge
EPDM/NR/PVC Liner
Polyester or Nylon Inner Jacket
COLOR
PU Cover
Red is available. Other colors are
available on request.
STANDARD LENGTH
20m, 25m, 30m, 40m.
Other length on your request.
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
iak.gr
40
www.mob
SNOW MAKING HOSE
TM Series
FEATURE
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
41 www.mobiak.
gr
SNOW MAKING HOSE
TP Series
FEATURE
COLOR
The standard color for Snow-making Hose–TP is
white. Other colors available with our innova- TPU Liner
tive Wisentec™ abrasion resistant coatings are
red, yellow, orange, blue, green and tan. Color Nylon Inner Jacket
will be uniform throughout the length of each Nylon Outer Jacket
hose. Cost for color coating is additional. Stripe
colors available are red, yellow, blue, green,
tan, orange, black, purple and silver.
STANDARD LENGTH
20m, 25m, 30m, 40m.
Other length on your request.
COUPLINGS AVAILABLE
Storz couplings & BS instantaneous
couplings & Italy couplings or other
type on your request.
42
43
MOBIAK S.A
96 - 98 M. Mpotsari str.
Chania, Crete, Greece
al
t e r n ation IED
In
i g e NOTIF ls
Pres t ova
d i e s Appr
Bo
Global
Recogn ly
iz
Prod uc ed
ts
44