Professional Documents
Culture Documents
PSD =(pMax)-10*LOG10(PRBs_DL*12), where pMax is Maximum eNB transmit power per antenna port and PRB
RS Power = PSD - PA
Below basic/simple calculation of power boosting on LTE Network (multi vendor), we can manipulate coverage/R
PSD =(pMax)-10*LOG10(PRBs_DL*12), where pMax is Maximum eNB transmit power per antenna port and PRB
RS Power = PSD - PA
Thanks//BR
ower per antenna port and PRBs is Number of available PRBs in DL.
ower per antenna port and PRBs is Number of available PRBs in DL.
Carrier BW PRB BW PRB RF
1.4 6 72 10 50 600
3 15 180
5 25 300 Carriers power
10 50 600 1 20
15 75 900
20 100 1200
PA
0
RRU Power Carriers power
1 20 PB
2 10 1
PB PA
0 3
1 0
1 -1.77
1 -3
2 -4.77
3 -6
RS Power = PSD - PA
0.033333333 15.22879 RS Power 15.22879
When P_B = (x) is selected, the LTE parameter PB will be set to (x), and the ratio rB / rA will be determined from Table 5.2-1 in 3
Table 5.2-1: The cell-specific ratio for 1, 2, or 4 cell specific antenna ports*
rB / rA
PB
One Antenna Port
0 1 5/4
1 4/5 1
2 3/5 3/4
3 2/5 1/2
mined from Table 5.2-1 in 3GPP TS 36.213. The table is reproduced below.