Professional Documents
Culture Documents
The Cover Page (pg. 2 of this document) is to be stapled as a front page of your
submission. All workings must be shown and hand written.
You are to submit a hardcopy of your work to the assignment box marked “GAO” on
level 6 of the Civil Engineering building, Kensington campus. The deadline for
submission is 5pm on Friday 5 October 2018.
1
Name: ASSIGNMENT Semester 2, 2018
Student ID: CVEN1300 Engineering Mechanics
Cover Page
Assignment Name:______________
Student ID:__________
2
Name: ASSIGNMENT Semester 2, 2018
Student ID: CVEN1300 Engineering Mechanics
Question 1:
The simply supported beam shown in Figure 1 carries two uniformly distributed loads and a
point load.
1) Calculate the reactions at B and C.
2) Draw the shear force and bending moment diagrams, clearly indicating the magnitude and
sign of all actions at A, B and C.
Figure 1
Question 2:
For the beam shown in Figure 2, calculate the reactions at B and C and neatly draw the shear
force and bending moment diagrams.
Figure 2
3
Name: ASSIGNMENT Semester 2, 2018
Student ID: CVEN1300 Engineering Mechanics
Question 3:
Calculate the reactions at B and C and draw the shear force and bending moment diagrams for
the simply supported beam structure shown in Figure 3.
20 kN/m
B C
50 kN
3m 10 m
Figure 3
Question 4:
For the frame shown in Figure 4,
1) Find the reactions at A and E.
2) Draw the axial force, shear force and bending moment diagrams for the frame, showing the
magnitude of all peak values.
30 kN/m
50 kN
B D E
C
6m
100 kN
5m 6m 4m
Figure 4
4
Name: ASSIGNMENT Semester 2, 2018
Student ID: CVEN1300 Engineering Mechanics
Question 5:
Calculate the reactions at A and F and draw the axial force, shear force and bending moment
diagrams for the frame shown in Figure 5.
10 kN
C D E
5m
10 kN/m
20 kN
B F
A
3m 5m 2m
Figure 5
Question 6:
For the frame shown in Figure 6,
1) Find the reactions at A and D.
2) Draw the axial force, shear force and bending moment diagrams for the frame.
Figure 6
5
Name: ASSIGNMENT Semester 2, 2018
Student ID: CVEN1300 Engineering Mechanics
Question 7:
For the pin-joined truss shown in Figure 7,
1) Find the reactions at A and G.
2) Determine the force in members BC, BF, FC and FE. State if these members are in tension or
compression.
A B C
150 kN 3m
G F E D 30 kN
4m 4m 4m
Figure 7
Question 8:
For the pin-joined truss shown in Figure 8, 1) Find the reactions at A and J; 2) Determine the
axial force in each of the 7 members connected at E, and state if these members are in tension or
compression.
Figure 8
6
Name: ASSIGNMENT Semester 2, 2018
Student ID: CVEN1300 Engineering Mechanics
Question 9:
The three blocks have weights of WA=60 kg, WB=15 kg and WC=50 kg. Determine the smallest
horizontal force P that must be applied to block C in order to move this block. The coefficient of
static friction between the blocks is 0.3 and between the floor and each block is 0.5.
Figure 9
Question 10:
Locate the centroid x , y of the beam’s cross-sectional area as shown in Figure 10, and then
determine the second moment of area with respect to the centroidal x ' and y ' axes.
Figure 10