not interchangeable. The brake disc (2C026) is a solid, full-cast, drum-in-hat type. The rear disc brake caliper (2552) is equipped with a riveted spring clip that secures it to either the rear disc brake caliper piston or the rear disc brake caliper housing. Brake Fluid WARNING: Use of any other than approved DOT 3 brake fluid will cause permanent damage to brake components and will render the brakes inoperative. Failure to follow these instructions may result in personal injury. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow Item Part Number Description these instructions may result in personal injury. 1 N807146-S101 Brake caliper bolt CAUTION: Brake fluid is harmful to 2 385116-S2 Flow bolt painted or plastic surfaces. If brake fluid is 3 388949-S Copper washer (2 req’d) spilled onto a painted or plastic surface, 4 2A442 Rear wheel brake hose immediately wash it with water. 5 2552 Rear disc brake caliper Use clean, fresh Ford High Performance DOT 3 6 — Brake pads Motor Vehicle Brake Fluid PM-1 or equivalent 7 2C220 Adapter assy meeting Ford specification ESA-M6C25A. 8 2A648 Shoe slippers • Do not reuse brake fluid drained or bled from the 9 4234 Axle shaft system. 10 1107 Wheel stud (5 req’d) • Do not use brake fluid that has been stored in an 11 2C026 Brake disc open container. 12 — Keeper nut • Do not use contaminated brake fluid. (Continued)
Copyright 2003, Ford Motor Company
Last updated: 6/5/2006 2004 Explorer Sport Trac, 9/2003