Professional Documents
Culture Documents
01.020 Terminology (principles and SANS 17000:2005 / ISO/IEC 17000:2004 NUM 538
coordination) Conformity assessment - Vocabulary and general principles
________________________________________________________
SANS 427-1:2006 / ISO 1087-1:2000 NUM 54 SANS 20252:2006 / ISO 20252:2006 NUM 562
Terminology work - Vocabulary Part 1: Theory and application Market, opinion and social research - Vocabulary and service
requirements
SANS 427-2:2006 / ISO 1087-2:2000 NUM 54 ARP 070:2007 / ISO/IEC Guide 73:2002 NUM 724
Terminology work - Vocabulary Part 2: Computer applications Risk management - Vocabulary - Guidelines for use in standards
ARP 070:2007 / ISO/IEC Guide 73:2002 NUM 724 SANS 2064:1980 / ISO 2064:1980 NUM 244
Risk management - Vocabulary - Guidelines for use in standards Metallic and other non-organic coatings - Definitions and
conventions concerning the measurement of thickness
SANS 10207:1985 NUM 458 SANS 7296-3:2007 / ISO 7296-3:2006 NUM 372
Colour-coded labels for the identification of classes of medicine Cranes - Graphical symbols Part 3: Tower cranes
used in anaesthesiology
NRS 040-2:2000 NUM 760 ARP 064:2005 / ISO 16069:2004 NUM 723
High-voltage operating regulations Part 2: Voltage colour coding for Graphical symbols - Safety signs - Safety way guidance systems
diagrammatic displays in control rooms - Colour coding for wall- (SWGS)
mounted operating diagrams and electronic displays relating to the
generation, transmission and distribution of electricity
01.080.30 Graphical symbols for use on
mechanical engineering and
01.075 Character symbols construction drawings, diagrams,
________________________________________________________
plans, maps and in relevant technical
SANS 3534-1:2007 / ISO 3534-1:2006 NUM 258 product documentation
Statistics - Vocabulary and symbols Part 1: General statistical ________________________________________________________
terms and terms used in probability
SANS 2553:1992 / ISO 2553:1992 NUM 251
SANS 3534-2:2007 / ISO 3534-2:2006 NUM 258 Welded, brazed and soldered joints - Symbolic representation on
Statistics - Vocabulary and symbols Part 2: Applied statistics drawings
SANS 7904-1:2006 / ISO 7904-1:1995 NUM 380 01.080.40 Graphical symbols for use on
Plain bearings - Symbols Part 1: Basic symbols electrical and electronics engineering
drawings, diagrams, charts and in
SANS 7904-2:2006 / ISO 7904-2:1995 NUM 380 relevant technical product
Plain bearings - Symbols Part 2: Applications documentation
________________________________________________________
SANS 61930:2004 / IEC/TR 61930:1998 NUM 696
01.080.10 Public information symbols
Fibre optic graphical symbology
________________________________________________________
NRS 001:2004 NUM 753 SANS 9706:2006 / ISO 9706:1994 NUM 400
Code of practice for the drafting and presentation of specifications Information and documentation - Paper for documents -
Requirements for permanence
SANS 2108:2005 / ISO 2108:2005 NUM 245 SANS 3166-1:2007 / ISO 3166-1:2006 NUM 254
Information and documentation - International Standard Book Codes for the representation of names of countries and their
Number (ISBN) subdivisions Part 1: Country codes
SANS 2788:2005 / ISO 2788:1986 NUM 252 SANS 3166-3:2005 / ISO 3166-3:1999 NUM 255
Documentation - Guidelines for the establishment and development Codes for the representation of names of countries and their
of monolingual thesauri subdivisions Part 3: Code for formerly used names of countries
SANS 3166-1:2007 / ISO 3166-1:2006 NUM 254 SANS 6422:1985 / ISO 6422:1985 NUM 364
Codes for the representation of names of countries and their Layout key for trade documents
subdivisions Part 1: Country codes
SANS 8601:2003 / ISO 8601:2000 NUM 389
SANS 3166-3:2005 / ISO 3166-3:1999 NUM 255
Data elements and interchange formats - Information interchange -
Codes for the representation of names of countries and their Representation of dates and times
subdivisions Part 3: Code for formerly used names of countries
SANS 15706:2005 / ISO 15706:2002 NUM 533 03.100.01 Company organization and
Information and documentation - International Standard management in general
Audiovisual Number (ISAN) ________________________________________________________
ARP 099-1:2007 NUM 725
03.020 Sociology. Demography Business process outsourcing and offshoring operations Part 1:
________________________________________________________ Outbound contact centre operations
SANS 20252:2006 / ISO 20252:2006 NUM 562 ARP 099-2:2007 NUM 725
Market, opinion and social research - Vocabulary and service Business process outsourcing and offshoring operations Part 2:
requirements Inbound contact centre operations
SANS 10247:1993 NUM 466 SANS 9926-3:2007 / ISO 9926-3:2005 NUM 403
The cleaning of textile upholstered furniture Cranes - Training of drivers Part 3: Tower cranes
SANS 10346:2007 NUM 479 SANS 9928-1:2006 / ISO 9928-1:1990 NUM 403
Complaints handling Cranes - Crane driving manual Part 1: General
ARP 099-2:2007 NUM 725 SANS 18878:2007 / ISO 18878:2004 NUM 544
Business process outsourcing and offshoring operations Part 2: Mobile elevating work platforms - Operator (driver) training
Inbound contact centre operations
ARP 099-3:2007 NUM 725 SANS 19796-1:2006 / ISO/IEC 19796-1:2005 NUM 550
Business process outsourcing and offshoring operations Part 3: Information technology - Learning, education and training - Quality
Back-office processing operations management, assurance and metrics Part 1: General approach
NRS 070:2004 NUM 763 SANS 20807:2004 / ISO 20807:2004 NUM 562
Quality of service standard for non-grid electricity customers Non-destructive testing - Qualification of personnel for limited
applications of non-destructive testing
SANS 10120-1:1986 NUM 418 SANS 10007:2004 / ISO 10007:2003 NUM 405
Code of practice for use with standardized specifications for civil Quality management systems - Guidelines for configuration
engineering construction and contract documents Part 1: Format management
and contents
SANS 10014:2006 / ISO 10014:2006 NUM 406
SANS 10120-2 TO 5 INT SET NUM 418 Quality management - Guidelines for realizing financial and
Code of practice for use with standardized specifications for civil economic benefits
engineering construction and contract documents Parts 2 to 5
Introduction SANS 10015:1999 / ISO 10015:1999 NUM 406
Quality management - Guidelines for training
SANS 10120-2 INTRO:1986 NUM 423
Code of practice for use with standardized specifications for civil
SANS 10330:2007 NUM 478
engineering construction and contract documents Part 2: Project
specification, Introduction Requirements for a Hazard Analysis and Critical Control Point
(HACCP) system
SANS 10120-3 INTRO:1986 NUM 429
SANS 10399:2003 NUM 484
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance Quality management systems - Requirements for bus operators
for design, Introduction
SANS 14004:2005 / ISO 14004:2004 NUM 516
Environmental management systems - General guidelines on
03.100.99 Other standards related to company principles, systems and support techniques
organization and management
________________________________________________________ SANS 14969:2006 / ISO/TR 14969:2004 NUM 525
SANS 15000-1:2004 / BS 15000-1:2002 NUM 525 Medical devices - Quality management systems - Guidance on the
application of ISO 13485:2003
IT service management Part 1: Specification for service
management SANS 15161:2003 / ISO 15161:2001 NUM 526
SANS 15000-2:2004 / BS 15000-2:2003 NUM 526 Guidelines on the application of ISO 9001:2000 for the food and
drink industry
IT service management Part 2: Code of practice for service
management SANS 16949:2002 / ISO/TS 16949:2002 NUM 538
Quality management systems - Particular requirements for the
application of ISO 9001:2000 for automotive production and
03.120.10 Quality management and quality relevant service part organizations
assurance
________________________________________________________ SANS 19011:2003 / ISO 19011:2002 NUM 545
SANS 274:2004 / ISO 10006:2003 NUM 39 Guidelines for quality and/or environmental management systems
auditing
Quality management systems - Guidelines for quality management
in projects SANS 29001:2006 / ISO/TS 29001:2003 NUM 566
SANS 430:2005 / ISO 10019:2005 NUM 55 Petroleum, petrochemical and natural gas industries - Sector-
specific quality management systems - Requirements for product
Guidelines for the selection of quality management system and service supply organizations
consultants and use of their services
SANS 90003:2004 / ISO/IEC 90003:2004 NUM 705
SANS 466:2005 / ISO 10005:2005 NUM 58
Software engineering - Guidelines for the application of ISO
Quality management systems - Guidelines for quality plans 9001:2000 to computer software
SANS 607:2007 / ISO Guide 34:2000 NUM 70 SANS 100013:2003 / ISO/TR 10013:2001 NUM 705
General requirements for the competence of reference material Guidelines for quality management system documentation
producers
ARP 063:2005 / IWA 4:2005 NUM 723
SANS 9000:2005 / ISO 9000:2005 NUM 393
Quality management systems - Guidelines for the application of
Quality management systems - Fundamentals and vocabulary SANS 9001:2000 in local government
SANS 9001:2000 / ISO 9001:2000 NUM 393 NRS 047-1:2006 NUM 760
Quality management systems - Requirements Electricity supply - Quality of service Part 1: Minimum standards
ISO 9001 SMALL BUSINESSES:2002 / ISO 9001 NUM 393 NRS 047-2:2001 NUM 760
Small Businesses:2002 Electricity supply - Quality of service Part 2: Reporting guidelines
ISO 9001 for Small Businesses - What to do - Advice from ISO/TC
176 (Hardcopy only) NRS 048-2:2003 NUM 761
SANS 9004:2000 / ISO 9004:2000 NUM 393 Electricity supply - Quality of supply Part 2: Voltage characteristics,
compatibility levels, limits and assessment methods
Quality management systems - Guidelines for performance
improvements
SANS 10002:2005 / ISO 10002:2004 NUM 404 03.120.20 Product and company certification.
Quality management - Customer satisfaction - Guidelines for Conformity assessment
complaints handling in organizations ________________________________________________________
SANS 10055-2:2003 NUM 408 SANS 2859-1:2004 / ISO 2859-1:1999 NUM 253
ISO 9001:2000 Process auditing Part 2: ISO 9001 Process Sampling procedures for inspection by attributes Part 1: Sampling
capability model and compliance indicators schemes indexed by acceptance quality limit (AQL) for lot-by-lot
inspection
SANS 10055-3:2003 NUM 408
ISO 9001: 2000 Process auditing Part 3: Generic process SANS 3301:2004 / ISO 3301:1975 NUM 256
performance model and work products Statistical interpretation of data - Comparison of two means in the
case of paired observations
SANS 10055-4:2003 NUM 408
ISO 9001: 2000 Process auditing Part 4: Process performance SANS 3534-1:2007 / ISO 3534-1:2006 NUM 258
model and work products for information technology Statistics - Vocabulary and symbols Part 1: General statistical
terms and terms used in probability
SANS 10216:2007 NUM 460
Evaluation of vehicle test stations SANS 3534-2:2007 / ISO 3534-2:2006 NUM 258
Statistics - Vocabulary and symbols Part 2: Applied statistics
SANS 10227:2007 NUM 463
Criteria for the operation of inspection authorities performing SANS 3534-3:2004 / ISO 3534-3:1999 NUM 258
inspection in terms of the Pressure Equipment Regulations Statistics - Vocabulary and symbols Part 3: Design of experiments
SANS 18234-4:2007 / ISO/TS 18234-4:2006 NUM 543 SANS 19112:2004 / ISO 19112:2003 NUM 546
Traffic and Travel Information (TTI) - TTI via Transport Protocol Geographic information - Spatial referencing by geographic
Expert Group (TPEG) data-streams Part 4: Road Traffic Message identifiers
(RTM) application
SANS 19113:2003 / ISO 19113:2002 NUM 546
SANS 18234-6:2007 / ISO/TS 18234-6:2006 NUM 544 Geographic information - Quality principles
Traffic and Travel Information (TTI) - TTI via Transport Protocol
Expert Group (TPEG) data-streams Part 6: Location referencing SANS 19114:2004 / ISO 19114:2003 NUM 546
applications
Geographic information - Quality evaluation procedures
SANS 24014-1:2007 / ISO 24014-1:2007 NUM 565
Public transport - Interoperable fare management system Part 1: SANS 19116:2004 / ISO 19116:2004 NUM 546
Architecture Geographic information - Positioning services
SANS 24535:2007 NUM 565 SANS 19121:2000 / ISO/TR 19121:2000 NUM 547
Intelligent transport systems - Framework for electronic registration Geographic information - Imagery and gridded data
and identification of vehicles using passive radio frequency
identification (RFID)
SANS 19127:2006 / ISO/TS 19127:2005 NUM 548
ARP 067-1:2007 NUM 724 Geographic information - Geodetic codes and parameters
Road transport management systems Part 1: Operator
requirements - Goods
Standard atmospheres for conditioning and/or testing - SANS 5807:1979 NUM 315
Specifications
Pesticides: Test rooms, test conditions, test equipment, and test
insects and their handling
07.080 Biology. Botany. Zoology SANS 5808:2003 NUM 315
________________________________________________________ Pesticides: General conditions and equipment for the rearing and
SANS 188:1978 NUM 27 handling of test insects
Pesticides: Rearing and handling of the Indian meal moth (Plodia SANS 5809:1977 NUM 316
interpunctella Hübner)
Pesticides: Rearing and handling of the tobacco beetle
SANS 5299:1977 NUM 289 (Lasioderma serricorne Fabr.)
Pesticides: Rearing and handling of the Mediterranean flour moth SANS 5810:1977 NUM 316
(Ephestia kuehniella Zeller)
Pesticides: Rearing and handling of the powder post beetle (Lyctus
SANS 5302:1977 NUM 290 brunneus Steph.)
Pesticides: Rearing and handling of the skin and hide beetle SANS 5811:1978 NUM 316
(Dermestes maculatus de Geer)
Pesticides: Rearing and handling of the lesser grain borer
SANS 5303:1977 NUM 290 (Rhizopertha dominica F.)
Pesticides: Rearing and handling of the human body louse SANS 5812:1978 NUM 316
(Pediculus humanus humanus L.)
Pesticides: Rearing and handling of the Pharaoh's ant
SANS 5332:1977 NUM 291 (Monomorium pharaonis (L.))
Pesticides: Rearing and handling of the common clothes moth SANS 5813:1978 NUM 316
(Tineola bisselliella Hummel)
Pesticides: Rearing and handling of the yellow mealworm (Tenebrio
SANS 5333:1970 NUM 291 molitor L.)
Pesticides: Rearing and handling the carpet beetle (Anthrenus SANS 5814:1978 NUM 316
vorax Waterh.) for the evaluation of pesticides
Pesticides: Rearing and handling of the rat flea (Xenopsylla
SANS 5334:1988 NUM 292 cheopis Rothschild)
Pesticides: Rearing and handling of the common housefly (Musca SANS 5815:1978 NUM 316
domestica L.)
Pesticides: Rearing and handling of the silver fish (Lepisma
SANS 5335:1977 NUM 292 saccharina L.)
Pesticides: Rearing and handling of the bedbug (Cimex Lectularius SANS 5816:1978 NUM 316
L.)
Pesticides: Rearing and handling of the West Indian drywood
SANS 5456:1978 NUM 295 termite (Cryptotermes brevis Walker)
Pesticides: Rearing and handling of the vinegar fly (Drosophila SANS 5819:1978 NUM 317
melanogaster (Mg.))
Pesticides: Rearing and handling of the dried-fruit moth (Ephestia
SANS 5457:1977 NUM 295 cautella Walker)
Pesticides: Rearing and handling of the American cockroach SANS 5820:1978 NUM 317
(Periplaneta Americana (L.))
Pesticides: Rearing and handling of the Angoumois grain moth
SANS 5458:1977 NUM 295 (Sitotroga cerealella Olivier)
Pesticides: Rearing and handling of the German cockroach SANS 10385-1:2005 NUM 483
(Blatella germanica (L.))
Requirements for the implementation of an identity preservation
SANS 5459:1978 NUM 296 system (IP system) Part 1: IP system for the production, storage,
handling and transportation of non-genetically modified
Pesticides: Rearing and handling of the confused flour beetle
unprocessed agricultural products
(Tribolium confusum (Duv.))
SANS 10385-2:2007 NUM 483
SANS 5460:1978 NUM 296
Requirements for the implementation of an identity preservation
Pesticides: Rearing and handling of the granary weevil (Sitophilus
system (IP system) Part 2: IP system for the processing and
granarius (L.))
manufacturing industry
SANS 5461:1977 NUM 296 SANS 10385-3:2007 NUM 483
Pesticides: Rearing and handling of the rice weevil (Sitophilus
Requirements for the implementation of an identity preservation
oryzae L.)
system (IP system) Part 3: Sampling and testing protocols
SANS 5462:1977 NUM 296
SANS 12469:2002 / EN 12469:2000 NUM 507
Pesticides: Rearing and handling of the yellow fever mosquito
Biotechnology - Performance criteria for microbiological safety
(Aedes aegypti L.)
cabinets
SANS 21528-1:2005 / ISO 21528-1:2004 NUM 563 SANS 6340:2004 / ISO 6340:1995 NUM 364
Microbiology of food and animal feeding stuffs - Horizontal methods Water quality - Detection of Salmonella species
for the detection and enumeration of Enterobacteriaceae Part 1:
Detection and enumeration by MPN technique with pre-enrichment
SANS 6461-1:2003 / ISO 6461-1:1986 NUM 365
SANS 21528-2:2005 / ISO 21528-2:2004 NUM 563 Water quality - Detection and enumeration of the spores of sulfite-
Microbiology of food and animal feeding stuffs - Horizontal methods reducing anaerobes (clostridia) Part 1: Method by enrichment in a
for the detection and enumeration of Enterobacteriaceae Part 2: liquid medium
Colony-count method
SANS 6461-2:2003 / ISO 6461-2:1986 NUM 365
VC 8041:2001 NUM 770 Water quality - Detection and enumeration of the spores of sulfite-
Microbiological safety cabinets (Classes I, II and III) reducing anaerobes (clostridia) Part 2: Method by membrane
filtration
SANS 5553:1975 NUM 299 SANS 9308-3:2004 / ISO 9308-3:1998 NUM 396
Media and reagents for microbiological tests Water quality - Detection and enumeration of Escherichia coli and
coliform bacteria Part 3: Miniaturized method (Most Probable
Number) for the detection and enumeration of E. coli in surface and
SANS 5730:1975 NUM 312 waste water
Antibacterial efficacy of solid and semi-solid antiseptics
SANS 9998:2004 / ISO 9998:1991 NUM 404
Water quality - Practices for evaluating and controlling
microbiological colony count media used in water quality tests
07.100.20 Microbiology of water
________________________________________________________ SANS 10705-1:2002 / ISO 10705-1:1995 NUM 487
SANS 203:2007 NUM 29 Water quality - Detection and enumeration of bacteriophages Part
Bactericidal and algaecidal efficacy of swimming pool chemicals 1: Enumeration of F-specific RNA bacteriophages
SANS 13843:2004 / ISO/TR 13843:2000 NUM 513 SANS 6887-2:2004 / ISO 6887-2:2003 NUM 368
Water quality - Guidance on validation of microbiological methods Microbiology of food and animal feeding stuffs - Preparation of test
samples, initial suspension and decimal dilutions for
microbiological examination Part 2: Specific rules for the
preparation of meat and meat products
07.100.30 Food microbiology
________________________________________________________ SANS 6887-3:2004 / ISO 6887-3:2003 NUM 369
SANS 585:1996 NUM 67 Microbiology of food and animal feeding stuffs - Preparation of test
samples, initial suspension and decimal dilutions for
The production of frozen fish, frozen marine molluscs and frozen microbiological examination Part 3: Specific rules for the
products derived therefrom preparation of fish and fishery products
SANS 587:2005 NUM 68 SANS 6887-4:2004 / ISO 6887-4:2003 NUM 369
Canned fish, canned marine molluscs and canned crustaceans and Microbiology of food and animal feeding stuffs - Preparation of test
products derived therefrom samples, initial suspension and decimal dilutions for
microbiological examination Part 4: Specific rules for the
SANS 4831:2007 / ISO 4831:2006 NUM 272
preparation of products other than milk and milk products, meat
Microbiology of food and animal feeding stuffs - Horizontal method and meat products, and fish and fishery products
for the detection and enumeration of coliforms - Most probable
number technique SANS 6888-1:1999 / ISO 6888-1:1999 NUM 369
Microbiology of food and animal feeding stuffs - Horizontal method
SANS 4832:2007 / ISO 4832:2006 NUM 273
for the enumeration of coagulase-positive staphylococci
Microbiology of feed and animal feeding stuffs - Horizontal method (Staphylococcus aureus and other species) Part 1: Technique
for the enumeration of coliforms - Colony-count technique using Baird-Parker agar medium
SANS 4833:2007 / ISO 4833:2003 NUM 273 SANS 6888-2:1999 / ISO 6888-2:1999 NUM 369
Microbiology of food and animal feeding stuffs - Horizontal method Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of microorganisms - Colony-count technique at for the enumeration of coagulase-positive staphylococci
30 °C (Staphylococcus aureus and other species) Part 2: Technique
using rabbit plasma fibrinogen agar medium
SANS 5761:1975 NUM 312
Examination for the presence of viable spores of mesophilic SANS 6888-3:2005 / ISO 6888-3:2003 NUM 369
Clostridium organisms in foods Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of coagulase-positive staphylococci
SANS 5762:1975 NUM 312 (staphylococcus aureus and other species) Part 3: Detection and
Examination for the presence of viable Bacillus anthracis in foods MPN technique for low numbers
SANS 6196:2006 NUM 351 SANS 7251:2005 / ISO 7251:2005 NUM 372
Examination for the presence of viable pathogenic Vibrio Microbiology of food and animal feeding stuffs - Horizontal method
organisms in foods for the detection and enumeration of presumptive Escherichia coli -
Most probable number technique
SANS 6257:2007 NUM 357
SANS 7932:2005 / ISO 7932:2004 NUM 380
Microbiological examination of canned meat and fish products
Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of presumptive Bacillus cereus - Colony-count
SANS 6267:2007 NUM 358 technique at 30 °C
Enumeration of lipolytic and oxidative organisms in foodstuffs
SANS 7937:2007 / ISO 7937:2004 NUM 380
SANS 6268:2007 NUM 358 Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of Clostridium perfringens - Colony-count
Microbiological examination of foodstuffs in retort pouches technique
SANS 6391:1997 / ISO 6391:1997 NUM 364 SANS 7954:1987 / ISO 7954:1987 NUM 381
Meat and meat products - Enumeration of Escherichia coli - Microbiology - General guidance for enumeration of yeasts and
Colony-count technique at 44 °C using membranes moulds - Colony count technique at 25 °C
SANS 6579:2003 / ISO 6579:2002 NUM 367 SANS 8261:2005 / ISO 8261 (IDF 122):2001 NUM 384
Microbiology of food and animal feeding stuffs - Horizontal method Milk and milk products - General guidance for the preparation of
for the detection of Salmonella spp. test samples, initial suspensions and decimal dilutions for
microbiological examination
SANS 6887-1:1999 / ISO 6887-1:1999 NUM 368
SANS 8914:1990 / ISO 8914:1990 NUM 392
Microbiology of food and animal feeding stuffs - Preparation of test
samples, initial suspension and decimal dilutions for Microbiology - General guidance for the detection of Vibrio
microbiological examination Part 1: General rules for the parahaemolyticus
preparation of the initial suspension and decimal dilutions
SANS 11133-2:2004 / ISO/TS 11133-2:2003 NUM 491
Microbiology of food and animal feeding stuffs - Guidelines on
preparation and production of culture media Part 2: Practical
guidelines on performance testing of culture media
SANS 11290-1:1996 / ISO 11290-1:1996 NUM 494 11.040.01 Medical equipment in general
Microbiology of food and animal feeding stuffs - Horizontal method ________________________________________________________
for the detection and enumeration of Listeria monocytogenes Part SANS 6025:1984 NUM 336
1: Detection method
Vinyl chloride monomer content of polyvinyl chloride plastics for
SANS 11290-2:1998 / ISO 11290-2:1998 NUM 494 medical use
Microbiology of food and animal feeding stuffs - Horizontal method SANS 13485:2004 / ISO 13485:2003 NUM 512
for the detection and enumeration of Listeria monocytogenes Part
2: Enumeration method Medical devices - Quality management systems - Requirements for
regulatory purposes
SANS 15214:1998 / ISO 15214:1998 NUM 526
SANS 14969:2006 / ISO/TR 14969:2004 NUM 525
Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of mesophilic lactic acid bacteria - Colony- Medical devices - Quality management systems - Guidance on the
count technique at 30 °C application of ISO 13485:2003
SANS 16654:2003 / ISO 16654:2001 NUM 538 SANS 14971:2006 / ISO 14971:2000 NUM 525
Microbiology of food and animal feeding stuffs - Horizontal method Medical devices - Application of risk management to medical
for the detection of Escherichia coli O157 devices
SANS 18593:2004 / ISO 18593:2004 NUM 544 SANS 15223:2006 / ISO 15223:2000 NUM 526
Microbiology of food and animal feeding stuffs - Horizontal methods Medical devices - Symbols to be used with medical device labels,
for sampling techniques from surfaces using contact plates and labelling and information to be supplied
swabs
SANS 60601-1:2007 / IEC 60601-1:2005 NUM 638
SANS 21567:2005 / ISO 21567:2004 NUM 563 Medical electrical equipment Part 1: General requirements for basic
Microbiology of food and animal feeding stuffs - Horizontal method safety and essential performance
for the detection of Shigella spp
SANS 60601-1-2:2005 / IEC 60601-1-2:2004 NUM 638
Medical electrical equipment Part 1-2: General requirements for
07.100.99 Other standards related to safety - Collateral standard: Electromagnetic compatibility -
Requirements and tests
microbiology
________________________________________________________
SANS 5277:1975 NUM 288 11.040.10 Anaesthetic, respiratory and
Resistance to attack by Chaetomium globosum reanimation equipment
________________________________________________________
SANS 5469:1967 NUM 296 SANS 39:2006 / ISO 407:2004 NUM 5
Soil burial Small medical gas cylinders - Pin-index yoke-type valve
connections
SANS 5472:1967 NUM 297
SANS 1409:2004 NUM 153
Resistance to fungal attack by Aspergillus niger
Outlet sockets and probes for medical (gas and vacuum) services
used in hospitals
SANS 5484:1981 NUM 297
Resistance to fungal attack by mixed fungi SANS 1453:1988 NUM 162
Copper tubes for medical gas and vacuum services
SANS 6266:2001 NUM 358
Virucidal efficacy of disinfectants and detergent-disinfectants using SANS 10006:2006 NUM 405
bacteriophages as indicator organisms Colour marking and identification of medical gas cylinders and
anaesthetic apparatus
SANS 12353:1999 / EN 12353:1999 NUM 506
Chemical disinfectants and antiseptics - Preservation of microbial SANS 10224:1990 NUM 462
strains used for the determination of bactericidal and fungicidal Non-flammable medical gas pipeline systems
activity
CKS 40:1982 NUM 727
11.020 Medical sciences and health care Oxygen for medical use
facilities in general
________________________________________________________ CKS 41:1982 NUM 727
Nitrous oxide for medical use
SANS 1921-6:2004 NUM 241
Construction and management requirements for works contracts
Part 6: HIV/AIDS awareness CKS 65:1982 NUM 729
Carbon dioxide for medical use
SANS 10248:2004 NUM 466
Management of healthcare waste CKS 588:1983 NUM 748
Soda lime granules with indicator for hospital use
SANS 16001:2007 / AMS 16001:2003 NUM 537
HIV and AIDS management systems - General requirements CKS 605:1987 NUM 749
Pressure regulators for medical gases
CKS 584:1983 NUM 748 SANS 11138-3:2007 / ISO 11138-3:2006 NUM 492
Dental duplicating material Sterilization of health care products - Biological indicators Part 3:
Biological indicators for moist heat sterilization processes
CKS 593:1984 NUM 749 SANS 17665-1:2007 / ISO 17665-1:2006 NUM 540
Dental base metal casting alloys Sterilization of health care products - Moist heat Part 1:
Requirements for the development, validation and routine control of
CKS 594:1984 NUM 749 a sterilization process for medical devices
Dental gypsum products CKS 64:1990 NUM 729
Medical air
SANS 10993-1:2003 / ISO 10993-1:1997 NUM 489 SANS 5012:1987 NUM 275
Biological evaluation of medical devices Part 1: Evaluation and Sodium chloride and total chloride content of solutions
testing
CKS 638:2001 NUM 751 SANS 11193-1:2004 / ISO 11193-1:2002 NUM 492
Orthopaedic cord
Single-use medical examination gloves Part 1: Specification for
gloves made from rubber latex or rubber solution
11.120.99 Other standards related to SANS 60598-2-25:1994 / IEC 60598-2-25:1994 NUM 637
pharmaceutics Luminaires Part 2-25: Particular requirements - Luminaires for use
in clinical areas of hospitals and health care buildings
________________________________________________________
SANS 433:1953 NUM 55 CKS 157:1972 NUM 733
Barrier creams Bowl stands
CKS 112:1972 NUM 731 SANS 14044:2006 / ISO 14044:2006 NUM 517
Metal crutches for adults Environmental management - Life cycle assessment -
Requirements and guidelines
SANS 14015:2003 / ISO 14015:2001 NUM 516 13.020.40 Pollution, pollution control and
Environmental management - Environmental assessment of sites conservation
and organizations (EASO) ________________________________________________________
SANS 14021:1999 / ISO 14021:1999 NUM 516 SANS 10331:2000 NUM 478
Environmental labels and declarations - Self-declared Translocation of certain species of wild herbivore
environmental claims (Type II environmental labelling)
SANS 14064-1:2006 / ISO 14064-1:2006 NUM 518
SANS 14031:1999 / ISO 14031:1999 NUM 517
Greenhouse gases Part 1: Specification with guidance at the
Environmental management - Environmental performance
organization level for quantification and reporting of greenhouse
evaluation - Guidelines
gas emissions and removals
SANS 14040:2006 / ISO 14040:2006 NUM 517
SANS 14064-2:2006 / ISO 14064-2:2006 NUM 518
Environmental management - Life cycle assessment - Principles
Greenhouse gases Part 2: Specification with guidance at the
and framework
project level for quantification, monitoring and reporting of
SANS 14042:2000 / ISO 14042:2000 NUM 517 greenhouse gas emission, reductions or removal enhancements
Environmental management - Life cycle assessment - Life cycle SANS 14064-3:2006 / ISO 14064-3:2006 NUM 518
impact assessment
Greenhouse gases Part 3: Specification with guidance for the
SANS 14043:2000 / ISO 14043:2000 NUM 517 validation and verification of greenhouse gas assertions
SANS 14049:2003 / ISO/TR 14049:2000 NUM 518 13.040.35 Cleanrooms and associated
Environmental management - Life cycle assessment - Examples of controlled environments
application of ISO 14041 to goal and scope definition and inventory ________________________________________________________
analysis
SANS 14644-1:1999 / ISO 14644-1:1999 NUM 523
Cleanrooms and associated controlled environments Part 1:
13.030.30 Special wastes Classification of air cleanliness
________________________________________________________ SANS 14644-2:2003 / ISO 14644-2:2000
NUM 524
SANS 10206:2007 NUM 458 Cleanrooms and associated controlled environments Part 2:
The handling, storage and disposal of pesticides Specifications for testing and monitoring to prove continued
compliance with ISO 14644-1
SANS 10248:2004 NUM 466 SANS 14644-4:2003 / ISO 14644-4:2001 NUM 524
Management of healthcare waste Cleanrooms and associated controlled environments Part 4:
Design, construction and start-up
SANS 20049:2004 / ECE R49:2000 NUM 556 SANS 10299-8:2003 NUM 474
Uniform provisions concerning the approval of compression ignition Development, maintenance and management of groundwater
(C.I.) and natural gas (NG) engines as well as positive-ignition (P.I.) resources Part 8: The management of water boreholes
engines fuelled with liquefied petroleum gas (LPG) and vehicles
equipped with C.I. and NG engines and P.I. engines fuelled with SANS 10299-9:2003 NUM 474
LPG, with regard to the emissions of pollutants by the engine Development, maintenance and management of groundwater
resources Part 9: The decommissioning of water boreholes
SANS 20083:2007 / ECE R83:2005 NUM 559
Uniform provisions concerning the approval of vehicles with regard
to the emission of pollutants according to engine fuel requirements 13.060.20 Drinking water
________________________________________________________
SANS 20096:2003 / ECE R96:1995 NUM 560
Uniform provisions concerning the approval of compression ignition SANS 241:2006 NUM 35
(C.I.) engines to be installed in agricultural and forestry tractors and Drinking water
in non-road mobile machinery with regard to the emissions of
pollutants by the engine
SANS 1657:2007 NUM 190
SANS 20101:2006 / ECE R101:2005 NUM 561 Bottled water of subterranean origin
Uniform provisions concerning the approval of passenger cars
powered by an internal combustion engine only, or powered by a SANS 1862:2003 NUM 236
hybrid electric power train with regard to the measurement of the
Packaged water other than natural mineral water
emission of carbon dioxide and fuel consumption and/or the
measurement of electric energy consumption and electric range,
and of categories M1 and N1 vehicles powered by an electric SANS 1865:2006 NUM 236
power train only with regard to the measurement of electric energy Point-of-use drinking water treatment units
consumption and electric range
SANS 10299-6:2003 NUM 474 SANS 5667-3:2006 / ISO 5667-3:2003 NUM 309
Development, maintenance and management of groundwater Water quality - Sampling Part 3: Guidance on the preservation and
resources Part 6: The installation and commissioning of pumping handling of water samples
equipment for production boreholes
SANS 5667-4:1987 / ISO 5667-4:1987 NUM 309
SANS 10299-7:2003 NUM 474
Water quality - Sampling Part 4: Guidance on sampling from lakes,
Development, maintenance and management of groundwater natural and man-made
resources Part 7: The rehabilitation of water boreholes
SANS 5667-5:2006 / ISO 5667-5:2006 NUM 310 SANS 5011:2005 / ISO 10523:1994 NUM 275
Water quality - Sampling Part 5: Guidance on sampling of drinking Water quality - Determination of pH
water from treatment works and piped distribution systems
SANS 4374:2007 / ASTM D 4374:2006 NUM 265 SANS 6056:2007 NUM 339
Standard test methods for cyanides in water - Automated methods Water - Sulfide content
for total cyanide, weak acid dissociable cyanide, and thiocyanate
SANS 7887:2005 / ISO 7887:1994 NUM 380 SANS 1186-5:2006 NUM 119
Water quality - Examination and determination of colour Symbolic safety signs Part 5: Photoluminescent signs
SANS 7888:2005 / ISO 7888:1985 NUM 380 SANS 10140-1:1978 NUM 446
Water quality - Determination of electrical conductivity Identification colour marking Part 1: General
SANS 9408:1999 / ISO 9408:1999 NUM 397 SANS 10239:1992 NUM 465
Water quality - Evaluation of ultimate aerobic biodegradability of Hygienic practices on commercial fishing vessels
organic compounds in aqueous medium by determination of
oxygen demand in a closed respirometer
SANS 10255:2003 NUM 467
Health, safety and environmental guidelines for the construction
13.060.99 Other standards related to water and operation of timber treatment plants
quality SANS 10333-1:2006 NUM 478
________________________________________________________
Industrial rope access Part 1: Worksite procedures
SANS 440:1987 NUM 56
The production of water for injections SANS 10333-2:2006 NUM 478
Industrial rope access Part 2: Training and certification procedures
SANS 50858-1:2002 / EN 858-1:2002 NUM 583
Separator systems for light liquids (e.g. oil and petrol) Part 1: SANS 10333-3:2006 NUM 478
Principles of product design, performance and testing, marking and
Industrial rope access Part 3: Inspection, certification and
quality control
management procedures for equipment
SANS 50858-2:2003 / EN 858-2:2003 NUM 583
SANS 10366:2006 NUM 481
Separator systems for light liquids (e.g. oil and petrol) Part 2:
Health and safety at live events- General requirements
Selection of nominal size, installation, operation and maintenance
SANS 14159:2006 / ISO 14159:2002 NUM 519 SANS 10083:2004 NUM 410
Safety of machinery - Hygiene requirements for the design of The measurement and assessment of occupational noise for
machinery hearing conservation purposes
SANS 60204-11:2000 / IEC 60204-11:2000 NUM 608 SANS 10103:2004 NUM 415
Safety of machinery - Electrical equipment of machines Part 11: The measurement and rating of environmental noise with respect
Requirements for HV equipment for voltages above 1 000 V a.c or to land use, health, annoyance and to speech communication
1 500 V d.c and not exceeding 36 kV
SANS 10182:2006 NUM 453
SANS 60745-2-5:2003 / IEC 60745-2-5:2003 NUM 645 The measurement and assessment of acoustic environments for
Hand-held motor-operated electric tools - Safety Part 2-5: audiometric tests
Particular requirements for circular saws
SANS 11690-1:1996 / ISO 11690-1:1996 NUM 499
Acoustics - Recommended practice for the design of low-noise
13.120 Domestic safety workplaces containing machinery Part 1: Noise control strategies
________________________________________________________
SANS 11690-2:1996 / ISO 11690-2:1996 NUM 499
SANS 60335-2-7:2006 / IEC 60335-2-7:2006 NUM 616
Acoustics - Recommended practice for the design of low-noise
Household and similar electrical appliances - Safety Part 2-7: workplaces containing machinery Part 2: Noise control measures
Particular requirements for washing machines
SANS 11690-3:1997 / ISO/TR 11690-3:1997 NUM 499
SANS 60335-2-11:2003 / IEC 60335-2-11:2003 NUM 617
Acoustics - Recommended practice for the design of low-noise
Household and similar electrical appliances - Safety Part 2-11: workplaces containing machinery Part 3: Sound propagation and
Particular requirements for tumble dryers noise prediction in workrooms
SANS 60335-2-12:2003 / IEC 60335-2-12:2002 NUM 617
Household and similar electrical appliances - Safety Part 2-12: 13.160 Vibration and shock with respect to
Particular requirements for warming plates and similar appliances human beings
SANS 60335-2-17:2003 / IEC 60335-2-17:2002 NUM 618 ________________________________________________________
Household and similar electrical appliances - Safety Part 2-17: SANS 2631-1:1997 / ISO 2631-1:1997 NUM 252
Particular requirements for blankets, pads and similar flexible Mechanical vibration and shock - Evaluation of human exposure to
heating appliances whole-body vibration Part 1: General requirements
SANS 60335-2-25:2006 / IEC 60335-2-25:2005 NUM 618 SANS 8662-1:1988 / ISO 8662-1:1988 NUM 389
Household and similar electrical appliances - Safety Part 2-25: Hand-held portable power tools - Measurement of vibrations at the
Particular requirements for microwave ovens, including handle Part 1: General
combination microwave ovens
SANS 8662-2:1992 / ISO 8662-2:1992 NUM 389
SANS 60335-2-27:2007 / IEC 60335-2-27:2007 NUM 619
Hand-held portable power tools - Measurement of vibrations at the
Household and similar electrical appliances - Safety Part 2-27: handle Part 2: Chipping hammers and riveting hammers
Particular requirements for appliances for skin exposure to
ultraviolet and infrared radiation SANS 8662-3:1992 / ISO 8662-3:1992 NUM 390
SANS 60335-2-45:2003 / IEC 60335-2-45:2002 NUM 621 Hand-held portable power tools - Measurement of vibrations at the
handle Part 3: Rock drills and rotary hammers
Household and similar electrical appliances - Safety Part 2-45:
Particular requirements for portable heating tools and similar SANS 8662-4:1994 / ISO 8662-4:1994 NUM 390
appliances
Hand-held portable power tools - Measurement of vibrations at the
SANS 60335-2-55:2003 / IEC 60335-2-55:2002 NUM 622 handle Part 4: Grinders
Household and similar electrical appliances - Safety Part 2-55: SANS 8662-5:2003 / ISO 8662-5:1992 NUM 390
Particular requirements for electrical appliances for use with
Hand-held portable power tools - Measurement of vibrations at the
aquariums and garden ponds
handle Part 5: Pavement breakers and hammers for construction
SANS 60335-2-106:2007 / IEC 60335-2-106:2007 NUM 629 work
Household and similar electrical appliances - Safety Part 2-106: SANS 8662-6:2003 / ISO 8662-6:1994 NUM 390
Particular requirements for heated carpets and for heating units for
Hand-held portable power tools - Measurement of vibrations at the
room heating installed under removable floor coverings
handle Part 6: Impact drills
SANS 8662-10:2003 / ISO 8662-10:1998 NUM 390 SANS 10400:1990 NUM 484
Hand-held portable power tools - Measurement of vibrations at the The application of the National Building Regulations
handle Part 10: Nibblers and shears
SANS 60479-3:1998 / IEC 60479-3:1998 NUM 634 SANS 1567:2003 NUM 181
Effects of current on human beings and livestock Part 3: Effects of Portable rechargeable fire extinguishers - CO2 type extinguishers
currents passing through the body of livestock
SANS 1739:1998 NUM 221
13.220.01 Protection against fire in general Low pressure welded steel cylinders for fire extinguishers
________________________________________________________
SANS 4642:2007 / ISO 4642:1978 NUM 271
SANS 10090:2003 NUM 413
Rubber products - Hoses, non-collapsible, for fire-fighting service
Community protection against fire
SANS 6172:2003 NUM 349 SANS 14520-15:2000 / ISO 14520-15:2000 NUM 522
Fire extinguishers - Assessment of fire rating Gaseous fire-extinguishing systems - Physical properties and
system design Part 15: IG-541 extinguishant
SANS 10105-1:2005 NUM 415 SANS 14557:2007 / ISO 14557:2002 NUM 523
The use and control of fire-fighting equipment Part 1: Portable and Fire-fighting hoses - Rubber and plastics suction hoses and hose
wheeled (mobile) fire extinguishers assemblies
SANS 10105-2:2005 NUM 415 CKS 532:1979 NUM 747
The use and control of fire-fighting equipment Part 2: Fire hose Fire extinguishing agent: aqueous-film-forming-foam concentrate
reels, hydrants and booster connections
SANS 14520-11:2000 / ISO 14520-11:2000 NUM 522 SANS 1515-1:2006 NUM 171
Gaseous fire-extinguishing systems - Physical properties and Gas measuring equipment primarily for use in mines Part 1:
system design Part 11: HFC 236fa extinguishant Battery-operated portable, flammable gas measuring instruments
and warning devices
SANS 14520-12:2000 / ISO 14520-12:2000 NUM 522
Gaseous fire-extinguishing systems - Physical properties and SANS 1515-2:2006 NUM 171
system design Part 12: IG-01 extinguishant Gas measuring equipment primarily for use in mines Part 2: Fixed,
transportable, and vehicle-mounted flammable gas measuring and
SANS 14520-13:2000 / ISO 14520-13:2000 NUM 522 warning sensor heads and instruments
Gaseous fire-extinguishing systems - Physical properties and
system design Part 13: IG-100 extinguishant SANS 1910:2006 NUM 239
Portable refillable fire extinguishers
SANS 14520-14:2000 / ISO 14520-14:2000 NUM 522
Gaseous fire-extinguishing systems - Physical properties and SANS 10139:2007 NUM 446
system design Part 14: IG-55 extinguishant
Fire detection and alarm systems for buildings - System design,
installation and servicing
SANS 50054-1:1976 / EN 54-1:1976 NUM 567 SANS 60331-11:1999 / IEC 60331-11:1999 NUM 613
Components of automatic fire detection systems Part 1: Tests for electric cables under fire conditions - Circuit integrity Part
Introduction 11: Apparatus - Fire alone at a flame temperature of at least 750
°C
SANS 50054-2:1997 / EN 54-2:1997 NUM 567
Fire detection and fire alarm systems Part 2: Control and indicating SANS 60331-12:2003 / IEC 60331-12:2002 NUM 613
equipment Tests for electric cables under fire conditions - Circuit integrity Part
12: Apparatus - Fire with shock at a temperature of at least 830
SANS 50054-3:2001 / EN 54-3:2001 NUM 567 degrees C
Fire detection and fire alarm systems Part 3: Fire alarm devices -
Sounders SANS 60331-21:1999 / IEC 60331-21:1999 NUM 613
Tests for electric cables under fire conditions - Circuit integrity Part
SANS 50054-4:1997 / EN 54-4:1997 NUM 567 21: Procedures and requirements - Cables of rated voltage up to
Fire detection and fire alarm systems Part 4: Power supply and including 0,6/1,0 kV
equipment
SANS 60331-23:1999 / IEC 60331-23:1999 NUM 614
SANS 50054-5:2000 / EN 54-5:2000 NUM 567 Tests for electric cables under fire conditions - Circuit integrity Part
Fire detection and fire alarm systems Part 5: Heat detectors - Point 23: Procedures and requirements - Electric data cables
detectors
SANS 60331-25:1999 / IEC 60331-25:1999 NUM 614
SANS 50054-7:2000 / EN 54-7:2000 NUM 567 Tests for electric cables under fire conditions - Circuit integrity Part
Fire detection and fire alarm systems Part 7: Smoke detectors - 25: Procedures and requirements - Optical fibre cables
Point detectors using scattered light, transmitted light or ionization
SANS 60331-31:2003 / IEC 60331-31:2002 NUM 614
SANS 50054-11:2001 / EN 54-11:2001 NUM 567 Test for electric cables under fire conditions - Circuit integrity Part
Fire detection and fire alarm systems Part 11: Manual call points 31: Procedures and requirements for fire with shock - Cables of
rated voltage up to and including 0,6/1 kV
SANS 3795:1989 / ISO 3795:1989 NUM 260 SANS 60332-1-3:2005 / IEC 60332-1-3:2004 NUM 614
Road vehicles, and tractors and machinery for agriculture and Tests on electric and optical fibre cables under fire conditions Part
forestry - Determination of burning behaviour of interior materials 1-3: Test for vertical flame propagation for a single insulated wire or
cable - Procedure for determination of flaming droplets/particles
SANS 5891:2003 NUM 325
Pesticides - Flammability of aerosols (flame projection test) SANS 60332-2-1:2005 / IEC 60332-2-1:2004 NUM 614
Tests on electric and optical fibre cables under fire conditions Part
SANS 6105:2007 NUM 343 2-1: Test for vertical flame propagation for a single small insulated
wire or cable - Apparatus
Surface burning properties of textile fabric with a raised fibre
surface SANS 60332-2-2:2005 / IEC 60332-2-2:2004 NUM 614
SANS 6940:2005 / ISO 6940:2004 NUM 370 Tests on electric and optical fibre cables under fire conditions Part
2-2: Test for vertical flame propagation for a single small insulated
Textile fabrics - Burning behaviour - Determination of ease of wire or cable - Procedure for diffusion flame
ignition of vertically oriented specimens
SANS 60332-3-10:2000 / IEC 60332-3-10:2000 NUM 615
SANS 6941:2004 / ISO 6941:2003 NUM 370
Tests on electric cables under fire conditions Part 3-10: Test for
Textile fabrics - Burning behaviour - Measurement of flame spread vertical flame spread of vertically-mounted bunched wires or cables
properties of vertically oriented specimens - Apparatus
SANS 8191-1:1987 / ISO 8191-1:1987 NUM 382 SANS 60332-3-21:2000 / IEC 60332-3-21:2000 NUM 615
Furniture - Assessment of the ignitability of upholstered furniture Tests on electric cables under fire conditions Part 3-21: Test for
Part 1: Ignition source: smouldering cigarette vertical flame spread of vertically-mounted bunched wires or cables
- Category A F/R
SANS 8191-2:1988 / ISO 8191-2:1988 NUM 382
Furniture - Assessment of ignitability of upholstered furniture Part SANS 60332-3-22:2000 / IEC 60332-3-22:2000 NUM 615
2: Ignition source: match-flame equivalent Tests on electric cables under fire conditions Part 3-22: Test for
vertical flame spread of vertically-mounted bunched wires or cables
SANS 51021-1:2006 / EN 1021-1:2006 NUM 586 - Category A
Furniture - Assessment of the ignitability of upholstered furniture
Part 1: Ignition source smouldering cigarette SANS 60332-3-23:2000 / IEC 60332-3-23:2000 NUM 615
Tests on electric cables under fire conditions Part 3-23: Test for
SANS 51021-2:2006 / EN 1021-2:2006 NUM 586 vertical flame spread of vertically-mounted bunched wires or cables
Furniture - Assessment of the ignitability of upholstered furniture - Category B
Part 2: Ignition source match flame equivalent
SANS 60332-3-24:2000 / IEC 60332-3-24:2000 NUM 615 SANS 10177-10:2007 NUM 453
Tests on electric cables under fire conditions Part 3-24: Test for Fire testing of materials, components and elements used in
vertical flame spread of vertically-mounted bunched wires or cables buildings Part 10: Surface burning characteristics of building
- Category C materials using the inverted channel tunnel test
SANS 60332-3-25:2000 / IEC 60332-3-25:2000 NUM 615 SANS 10177-11:2007 NUM 453
Tests on electric cables under fire conditions Part 3-25: Test for Fire testing of materials, components and elements used in
vertical flame spread of vertically-mounted bunched wires or cables buildings Part 11: Large-scale fire performance evaluation of
- Category D building envelope thermal insulation systems (with or without
sprinklers)
SANS 60695-11-10:2004 / IEC 60695-11-10:2003 NUM 641
Fire hazard testing Part 11-10: Test flames - 50 W horizontal and
vertical flame test methods 13.230 Explosion protection
________________________________________________________
SANS 60754-2:1991 / IEC 60754-2:1991 NUM 647
SANS 96:2006 NUM 9
Test on gases evolved during combustion of materials from cables
Part 2: Determination of degree of acidity of gases by measuring Batch sampling and acceptance criteria for explosion-protected
pH and conductivity apparatus (EPA)
SANS 61034-2:2006 / IEC 61034-2:2005 NUM 675 SANS 61779-6:1999 / IEC 61779-6:1999 NUM 695
Measurement of smoke density of cables burning under defined Electrical apparatus for the detection and measurement of
conditions Part 2: Test procedure and requirements flammable gases Part 6: Guide for the selection, installation, use
and maintenance of apparatus for the detection and measurement
of flammable gases
13.220.50 Fire-resistance of building materials
and elements 13.260 Protection against electric shock.
________________________________________________________
Live working
SANS 428:2007 NUM 55 ________________________________________________________
Fire performance classification of thermal insulated building SANS 1934:2004 NUM 242
envelope systems
Live working - Portable equipment for earthing or earthing and
SANS 10177-1:2005 NUM 452 short-circuiting - National modifications to international
requirements
Fire testing of materials, components and elements used in
buildings Part 1: General introduction to the methods of test SANS 6224:1994 NUM 353
SANS 10177-2:2005 NUM 452 Footwear - Electrical resistance properties
Fire testing of materials, components and elements used in
buildings Part 2: Fire resistance test for building elements SANS 60479-1:2006 / IEC TS 60479-1:2005 NUM 633
Effects of current on human beings and livestock Part 1: General
SANS 10177-3:2005 NUM 452
aspects
Fire-testing of materials, components and elements used in
buildings Part 3: Surface fire index of finishing materials SANS 60479-2:1987 / IEC 60479-2:1987 NUM 633
Effects of current passing through the human body Part 2: Special
SANS 10177-4:2005 NUM 452
aspects
Fire testing of materials, components and elements used in
buildings Part 4: Surface fire index of floor coverings SANS 60479-4:2005 / IEC TR 60479-4:2004 NUM 634
Effects of current on human beings and livestock Part 4: Effects of
SANS 10177-5:2007 NUM 452
lightning strokes on human beings and livestock
Fire testing of materials, components and elements used in
buildings Part 5: Non-combustibility at 750 °C of building materials SANS 60529:2001 / IEC 60529:2001 NUM 634
Degrees of protection provided by enclosures (IP Code)
SANS 10177-6:2005 NUM 452
Fire testing of materials, components and elements used in
buildings Part 6: Non-combustibility at 300 °C of electrical SANS 60832:2006 / IEC 60832:1988 NUM 655
insulation materials Insulating poles (insulating sticks) and universal tool attachments
(fittings) for live working
SANS 10177-7:2005 NUM 453
Fire testing of materials, components and elements used in SANS 60900:2006 / IEC 60900:2004 NUM 659
buildings Part 7: Fire test for fire-check properties of building Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V
elements d.c.
SANS 10177-8:2006 NUM 453 SANS 60903:2005 / IEC 60903:2002 NUM 659
Fire testing of materials, components and elements used in Live working - Gloves of insulating material
buildings Part 8: Surface burning characteristics of building
materials SANS 61230:1993 / IEC 61230:1993 NUM 680
SANS 10177-9:2006 NUM 453 Live working - Portable equipment for earthing or earthing and
short-circuiting
Fire testing of materials, components and elements used in
buildings Part 9: Small-scale burning characteristics of building SANS 61481:2005 / IEC 61481:2004 NUM 689
materials: ignition, flame spread and heat contribution
Live working - Portable phase comparators for use on voltages
from 1 kV to 36 kV a.c.
SANS 62193:2006 / IEC 62193:2003 NUM 701 SANS 10089-3:1999 NUM 413
Live working - Telescopic sticks and telescopic measuring sticks The petroleum industry Part 3: The installation of underground
storage tanks, pumps/dispensers and pipework at service stations
and consumer installations
NRS 076:2005 NUM 764
Earthing of distribution substations with nominal voltages up to and SANS 10228:2006 NUM 463
including 132 kV The identification and classification of dangerous goods for
transport
SANS 60839-2-7:1994 / IEC 60839-2-7:1994 NUM 655 SANS 1658:2007 NUM 190
Alarm systems Part 2: Requirements for intruder alarm systems Ballistic resistance of body armour
Section 7: Passive glass-break detectors for use in buildings
ARP 4360:2003 / AS/NZS 4360:1999 SANS 12402-1:2007 / ISO 12402-1:2005 NUM 506
NUM 725
Guidelines for information security risk management Personal flotation devices Part 1: Lifejackets for seagoing ships -
Safety requirements
SANS 50143:2003 / EN 143:2000 NUM 570 SANS 50402:2006 / EN 402:2003 NUM 578
Respiratory protective devices - Particle filters - Requirements, Respiratory protective devices - Lung governed demand self-
testing, marking contained open-circuit compressed air breathing apparatus with full
face mask or mouthpiece assembly for escape - Requirements,
SANS 50144-1:2003 / EN 144-1:2000 NUM 570 testing, marking
Respiratory protective devices - Gas cylinder valves Part 1: Thread
connections for insert connector SANS 50403:2007 / EN 403:2004 NUM 579
Respiratory protective devices for self-rescue - Filtering devices
SANS 50144-2:1998 / EN 144-2:1998 NUM 570 with hood for escape from fire - Requirements, testing, marking
Respiratory protective devices - Gas cylinder valves - Outlet
connections SANS 50404:2007 / EN 404:2005 NUM 579
Respiratory protective devices for self-rescue - Filter self-rescuer
SANS 50145:1997 / EN 145:1997 NUM 570 from carbon monoxide with mouthpiece assembly
Respiratory protective devices - Self-contained closed-circuit
breathing apparatus - Compressed oxygen or compressed oxygen- SANS 50405:2003 / EN 405:2001 NUM 579
nitrogen type - Requirements, testing, marking Respiratory protective devices - Valved filtering half masks to
protect against gases or gases and particles - Requirements,
SANS 50145-2:1992 / EN 145-2:1992 NUM 570 testing, marking
Respiratory protective devices - Self-contained closed-circuit
compressed oxygen breathing apparatus for special use - Safety SANS 51061:1996 / EN 1061:1996 NUM 587
requirements, testing, marking Respiratory protective devices for self-rescue - Self-contained
closed-circuit breathing apparatus - Chemical oxygen (NaClO3)
SANS 50148-1:2003 / EN 148-1:1999 NUM 571 escape apparatus - Requirements, testing, marking
Respiratory protective devices - Threads for facepieces Part 1:
Standard thread connection SANS 51146:2006 / EN 1146:2005 NUM 587
Respiratory protective devices - Self-contained open-circuit
SANS 50148-2:2003 / EN 148-2:1999 NUM 571 compressed air breathing apparatus incorporating a hood for
Respiratory protective devices - Threads for facepieces Part 2: escape - Requirements, testing, marking
Centre thread connection
SANS 51827:2004 / EN 1827:1999 NUM 590
SANS 50148-3:2003 / EN 148-3:1999 NUM 571 Respiratory protective devices - Half masks without inhalation
Respiratory protective devices - Threads for facepieces Part 3: valves and with separable filters to protect against gases or gases
Thread connection M 45 x 3 and particles or particles only - Requirements, testing, marking
SANS 50149:2003 / EN 149:2001 NUM 571 SANS 51835:2004 / EN 1835:1999 NUM 590
Respiratory protective devices - Filtering half masks to protect Respiratory protective devices - Light duty construction
against particles - Requirements, testing, marking compressed air line breathing apparatus incorporating a helmet or
a hood - Requirements, testing, marking
SANS 50250:2003 / EN 250:2000 NUM 573
SANS 53794:2007 / EN 13794:2002 NUM 592
Respiratory equipment - Open-circuit self-contained compressed
air diving apparatus - Requirements, testing, marking Respiratory protective devices - Self-contained closed-circuit
breathing apparatus for escape - Requirements, testing, marking
SANS 50269:1994 / EN 269:1994 NUM 573
SANS 54387:2007 / EN 14387:2004 NUM 592
Respiratory protective devices - Powered fresh air hose breathing
apparatus incorporating a hood - Requirements, testing, marking Respiratory protective devices - Gas filter(s) and combined filter(s)
- Requirements, testing, marking
SANS 50270:1994 / EN 270:1994 NUM 573
SANS 54593-1:2006 / EN 14593-1:2005 NUM 593
Respiratory protective devices - Compressed air line breathing
apparatus incorporating a hood - Requirements, testing, marking Respiratory protective devices - Compressed air line breathing
apparatus with demand valve Part 1: Apparatus with a full face
SANS 50371:1992 / EN 371:1992 NUM 578 mask - Requirements, testing, marking
Respiratory protective devices - AX gas filters and combined filters SANS 54593-2:2006 / EN 14593-2:2005 NUM 593
against low boiling organic compounds - Requirements, testing,
marking Respiratory protective devices - Compressed air line breathing
apparatus with demand valve Part 2: Apparatus with a half mask at
SANS 50372:1992 / EN 372:1992 NUM 578 positive pressure - Requirements, testing, marking
Respiratory protective devices - SX gas filters and combined filters SANS 54594:2006 / EN 14594:2005 NUM 593
against specific named compounds - Requirements, testing,
marking Respiratory protective devices - Continuous flow compressed air
line breathing apparatus - Requirements, testing, marking
SANS 50400:1993 / EN 400:1993 NUM 578
CKS 441:1975 NUM 744
Respiratory protective devices for self-rescue - Self-contained
closed-circuit breathing apparatus - Compressed oxygen escape High-flying breathing oxygen
apparatus - Requirements, testing, marking
VC 8072:2003 NUM 772
SANS 50401:1993 / EN 401:1993 NUM 578
Compulsory specification for respirators
Respiratory protective devices for self-rescue - Self-contained
closed-circuit breathing apparatus - Chemical oxygen (KO2)
escape apparatus - Requirements, testing, marking VC 8073:2003 NUM 772
Breathing apparatus
SANS 1167:2006 NUM 116 SANS 12402-1:2007 / ISO 12402-1:2005 NUM 506
Industrial shoes (including safety shoes) with stuck-on pre-moulded Personal flotation devices Part 1: Lifejackets for seagoing ships -
or direct-injection-moulded soles and heels Safety requirements
SANS 1168:2006 NUM 116 SANS 12402-2:2007 / ISO 12402-2:2006 NUM 506
Industrial shoes (including safety shoes) with direct-vulcanized Personal flotation devices Part 2: Lifejackets, performance level
soles and heels 275 - Safety requirements
SANS 1320-1:2001 NUM 138 SANS 12402-3:2007 / ISO 12402-3:2006 NUM 506
PVC gum boots Part 1: Injection-moulded gum boots Personal flotation devices Part 3: Lifejackets, performance level
150 - Safety requirements
SANS 1320-2:2001 NUM 138 SANS 12402-4:2007 / ISO 12402-4:2006 NUM 506
PVC gum boots Part 2: Dip-moulded gum boots with pre-moulded Personal flotation devices Part 4: Lifejackets, performance level
stuck-on outer soles and heels 100 - Safety requirements
SANS 1320-3:2006 NUM 138 SANS 12402-5:2007 / ISO 12402-5:2006 NUM 506
PVC gum boots Part 3: Injection-moulded ankle boots for men Personal flotation devices Part 5: Buoyancy aids (level 50) - Safety
requirements
SANS 5645:1994 NUM 307
SANS 12402-6:2007 / ISO 12402-6:2006 NUM 507
Safety footwear - Impact resistance
Personal flotation devices Part 6: Special purpose lifejackets and
buoyancy aids - Safety requirements and additional test methods
SANS 6224:1994 NUM 353
Footwear - Electrical resistance properties SANS 12402-7:2007 / ISO 12402-7:2006 NUM 507
Personal flotation devices Part 7: Materials and components -
Safety requirements and test methods
SANS 12402-8:2007 / ISO 12402-8:2006 NUM 507 SANS 50363:2003 / EN 363:2002 NUM 577
Personal flotation devices Part 8: Accessories - Safety Personal protective equipment against falls from a height - Fall
requirements and test methods arrest systems
SANS 12402-9:2007 / ISO 12402-9:2006 NUM 507 SANS 50364:1992 / EN 364:1992 NUM 577
Personal flotation devices Part 9: Test methods Personal protective equipment against falls from a height - Test
methods
SANS 12402-10:2007 / ISO 12402-10:2006 NUM 507 SANS 50365:1992 / EN 365:1992 NUM 577
Personal flotation devices Part 10: Selection and application of Personal protective equipment against falls from a height - General
personal flotation devices and other relevant devices requirements for instructions for use and for marking
VC 8032:1982 NUM 770 SANS 50795:1996 / EN 795:1996 NUM 583
Personal flotation aids Protection against falls from a height - Anchor devices -
Requirements and testing
SANS 50353-1:2003 / EN 353-1:2002 NUM 576 SANS 603:2007 / ISO Guide 31:2000 NUM 69
Personal protective equipment against falls from a height - Guided Reference materials - Contents of certificates and labels
type fall arresters including a rigid anchor line
SANS 50361:2003 / EN 361:2002 NUM 577 17.040.01 Linear and angular measurements in
Personal protective equipment against falls from a height - Full general
body harnesses ________________________________________________________
SANS 5544:1980 NUM 299
SANS 50362:1992 / EN 362:1992 NUM 577
Dimensions of aluminium and copper strip, sheet, rod, bar, tube,
Personal protective equipment against falls from a height -
channel and angle
Connectors
SANS 10191:2007 / ISO 3740:2000 NUM 455 SANS 10843:1997 NUM 489
Acoustics - Determination of sound power levels of noise sources - Acoustics - Methods for the description and physical measurement
Guidelines for the use of basic standards of single impulses or series of impulses
SANS 10196:2007 / ISO 3745:2003 NUM 455 SANS 11200:1995 / ISO 11200:1995 NUM 493
Acoustics - Determination of sound power levels of noise sources Acoustics - Noise emitted by machinery and equipment -
using sound pressure - Precision methods for anechoic and hemi- Guidelines for the use of basic standards for the determination of
anechoic rooms emission sound pressure levels at a work station and at other
specified positions
SANS 10328:2003 NUM 478
Methods for environmental noise impact assessments SANS 11201:1995 / ISO 11201:1995 NUM 493
Acoustics - Noise emitted by machinery and equipment -
Measurement of emission sound pressure levels at a work station
SANS 10357:2004 NUM 480
and at other specified positions - Engineering method in an
The calculation of sound propagation by the Concawe method essentially free field over a reflecting plane
SANS 13474:2005 / ISO/TS 13474:2003 SANS 11202:1995 / ISO 11202:1995 NUM 493
NUM 512
Acoustics - Impulse sound propagation for environmental noise Acoustics - Noise emitted by machinery and equipment -
assessment Measurement of emission sound pressure levels at a work station
and at other specified positions - Survey method in situ
SANS 8297:1994 / ISO 8297:1994 NUM 384 SANS 10181:2003 NUM 453
Acoustics - Determination of sound power levels of multisource The measurement of noise emitted by road vehicles when
industrial plants for evaluation of sound pressure levels in the stationary
environment - Engineering method
SANS 10205:2007 NUM 458
SANS 8528-10:2006 / ISO 8528-10:1998 NUM 388
The measurement of noise emitted by motor vehicles in motion
Reciprocating internal combustion engine driven alternating current
generating sets Part 10: Measurement of airborne noise by the
enveloping surface method SANS 10210:2004 NUM 459
Calculating and predicting road traffic noise
SANS 20063:2004 / ECE R63:1985 NUM 557 SANS 5683:2006 NUM 311
Uniform provisions concerning the approval of two-wheeled Determination of shade depth class
mopeds with regard to noise
SANS 6001:2004 NUM 334
17.140.50 Electroacoustics Colour fastness of textile curtaining to water-wicking
________________________________________________________
SANS 6002:2004 NUM 334
SANS 60107-2:1997 / IEC 60107-2:1997 NUM 606
Colour fastness of textile floor coverings to shampooing
Methods of measurement on receivers for television broadcast
transmissions Part 2: Audio channels - General methods and
methods for monophonic channels SANS 6084:2004 NUM 341
Colour fastness of textiles to light: Mercury vapour lamp method
SANS 60942:2003 / IEC 60942:2003 NUM 661
Electroacoustics - Sound calibrators SANS 6261:1998 NUM 358
Paints and varnishes - Determination of retro-reflected luminance
SANS 61672-1:2003 / IEC 61672-1:2002 NUM 694 by means of a portable retro-reflectometer
Electroacoustics - Sound level meters Part 1: Specifications
SANS 7724-3:1984 / ISO 7724-3:1984 NUM 375
SANS 61672-2:2003 / IEC 61672-2:2003 NUM 694 Paints and varnishes - Colorimetry Part 3: Calculation of colour
differences
Electroacoustics - Sound level meters Part 2: Pattern evaluation
tests SANS 11166:2006 NUM 492
Textiles - Colour fastness to domestic washing procedures
17.140.99 Other standards related to acoustics
________________________________________________________
SANS 10154-1:2004
17.200.10 Heat. Calorimetry
NUM 449
________________________________________________________
Calibration of pure-tone audiometers Part 1: Air conduction
SANS 61241-2-1:1994 / IEC 61241-2-1:1994 NUM 680
SANS 10154-2:2004 NUM 449 Electrical apparatus for use in the presence of combustible dust
Part 2: Test methods Section 1: Methods for determining the
Calibration of pure-tone audiometers Part 2: Bone conduction minimum ignition temperatures of dust
SANS 216-1-3:2005 / CISPR 16-1-3:2004 NUM 31 SANS 60044-1:2003 / IEC 60044-1:2003 NUM 598
Specification for radio disturbance and immunity measuring Instrument transformers Part 1: Current transformers
apparatus and methods Part 1-3: Radio disturbance and immunity
measuring apparatus - Ancillary equipment - Disturbance power SANS 60044-3:2004 / IEC 60044-3:2002 NUM 598
SANS 216-1-4:2007 / CISPR 16-1-4:2007 NUM 31 Instrument transformers Part 3: Combined transformers
Specification for radio disturbance and immunity measuring
apparatus and methods Part 1-4: Radio disturbance and immunity SANS 60044-5:2005 / IEC 60044-5:2004 NUM 598
measuring apparatus - Ancillary equipment - Radiated disturbances Instrument transformers Part 5: Capacitor voltage transformers
SANS 216-1-5:2004 / CISPR 16-1-5:2003 NUM 31
SANS 60044-6:2004 / IEC 60044-6:1992 NUM 598
Specification for radio disturbance and immunity measuring
apparatus and methods Part 1-5: Radio disturbance and immunity Instrument transformers Part 6: Requirements for protective current
measuring apparatus - Antenna calibration test sites for 30 MHz to transformers for transient performance
1 000 MHz
SANS 60044-7:1999 / IEC 60044-7:1999 NUM 598
SANS 216-2-1:2006 / CISPR 16-2-1:2005 NUM 32 Instrument transformers Part 7: Electronic voltage transformers
Specification for radio disturbance and immunity measuring
apparatus and methods Part 2-1: Methods of measurement of SANS 60044-8:2004 / IEC 60044-8:2002 NUM 598
disturbances and immunity - Conducted disturbance
measurements Instrument transformers Part 8: Electronic current transformers
SANS 216-2-2:2006 / CISPR 16-2-2:2005 NUM 32 SANS 60107-1:1997 / IEC 60107-1:1997 NUM 606
Specification for radio disturbance and immunity measuring Methods of measurement on receivers for television broadcast
apparatus and methods Part 2-2: Methods of measurement of transmissions Part 1: General considerations - Measurements at
disturbances and immunity - Measurement of disturbance power radio and video frequencies
SANS 216-2-3:2007 / CISPR 16-2-3:2006 NUM 32 SANS 60211:1966 / IEC 60211:1966 NUM 609
Specification for radio disturbance and immunity measuring Maximum demand indicators, Class l.0
apparatus and methods Part 2-3: Methods of measurement of
disturbances and immunity - Radiated disturbance measurements
SANS 60270:2000 / IEC 60270:2000 NUM 611
SANS 216-2-4:2004 / CISPR 16-2-4:2003 NUM 32 High-voltage test techniques - Partial discharge measurements
Specification for radio disturbance and immunity measuring
apparatus and methods Part 2-4: Methods of measurement of SANS 60514:1975 / IEC 60514:1975 NUM 634
disturbances and immunity - Immunity measurements
Acceptance inspection of Class 2 alternating-current watthour
SANS 216-4-1:2005 / CISPR/TR 16-4-1:2005 NUM 32 meters
Specification for radio disturbance and immunity measuring SANS 61000-4-2:2001 / IEC 61000-4-2:2001 NUM 668
apparatus and methods Part 4-1: Uncertainties, statistics and limit
modelling - Uncertainties in standardized EMC tests Electromagnetic compatibility (EMC) Part 4-2: Testing and
measurement techniques - Electrostatic discharge immunity test
SANS 216-4-2:2004 / CISPR 16-4-2:2003 NUM 32
SANS 61000-4-3:2006 / IEC 61000-4-3:2006 NUM 668
Specification for radio disturbance and immunity measuring
apparatus and methods Part 4-2: Uncertainties, statistics and limit Electromagnetic compatibility (EMC) Part 4-3: Testing and
modelling - Uncertainty in EMC measurements measurement techniques - Radiated, radio-frequency,
electromagnetic field immunity test
SANS 216-4-3:2007 / CISPR/TR 16-4-3:2007 NUM 32
SANS 61000-4-4:2004 / IEC 61000-4-4:2004 NUM 668
Specification for radio disturbance and immunity measuring
apparatus and methods Part 4-3: Uncertainties, statistics and limit Electromagnetic compatibility (EMC) Part 4-4: Testing and
modelling - Statistical considerations in the determination of EMC measurement techniques - Electrical fast transient/burst immunity
compliance of mass-produced products test
SANS 216-4-4:2004 / CISPR/TR 16-4-4:2003 NUM 33 SANS 61000-4-5:2006 / IEC 61000-4-5:2005 NUM 668
Specification for radio disturbance and immunity measuring Electromagnetic compatibility (EMC) Part 4-5: Testing and
apparatus and methods Part 4-4: Uncertainties, statistics and limit measurement techniques - Surge immunity test
modelling - Statistics of complaints and a model for the calculation
of limits
SANS 6205:2007 NUM 351 SANS 60270:2000 / IEC 60270:2000 NUM 611
Extensibility test for extensible leads High-voltage test techniques - Partial discharge measurements
SANS 6206:2007 NUM 352 SANS 61010-031:2003 / IEC 61010-031:2002 NUM 672
Wear resistance of braided and unkinkable cords Safety requirements for electrical equipment for measurement,
control and laboratory use Part 031: Safety requirements for hand-
held probe assemblies for electrical measurement and test
SANS 6207:2007 NUM 352
Bending test for highly flexible cords such as tinsel cords SANS 61010-2-010:2007 / IEC 61010-2-010:2005 NUM 672
Safety requirements for electrical equipment for measurement,
SANS 6208:2007 NUM 352 control and laboratory use Part 2-010: Particular requirements for
Extension test for extensible leads laboratory equipment for the heating of materials
SANS 3453:2004 / ISO 3453:1984 NUM 257 SANS 6183:2006 NUM 350
Non-destructive testing - Liquid penetrant inspection - Means of Pesticides - Sieving of tablets and pellets
verification
SANS 3310-1:2000 / ISO 3310-1:2000 Fasteners Part 1: Terminology and nomenclature Section 2:
NUM 256
Cylindrical screw threads
Test sieves - Technical requirements and testing Part 1: Test
sieves of metal wire cloth SANS 1700-2-1:2003 / ISO 68-1:1998 NUM 193
SANS 3310-2:1999 / ISO 3310-2:1999 Fasteners Part 2: Screw threads Section 1: ISO general purpose
NUM 256
screw threads - Basic profile - Metric screw threads
Test sieves - Technical requirements and testing Part 2: Test
sieves of perforated metal plate
SANS 1700-2-2:2003 / ISO 261:1998 NUM 193 21.040.20 Inch screw threads
Fasteners Part 2: Screw threads Section 2: ISO general purpose ________________________________________________________
metric screw threads - General plan SANS 1700-2-10:1996 / ISO 263:1973 NUM 194
SANS 1700-2-3:2003 / ISO 262:1998 NUM 193 Fasteners Part 2: Screw threads Section 10: ISO inch screw
threads - General plan and selection for screws, bolts and nuts -
Fasteners Part 2: Screw threads Section 3: ISO general purpose
Diameter range 0,06 to 6 in
metric screw threads - Selected sizes for screws, bolts and nuts
SANS 1700-2-11:1996 / ISO 725:1978 NUM 194
SANS 1700-2-4:1996 / ISO 724:1993 NUM 193
Fasteners Part 2: Screw threads Section 11: ISO inch screw
Fasteners Part 2: Screw threads Section 4: ISO general-purpose
threads - Basic dimensions
metric screw threads - Basic dimensions
SANS 1700-2-12:1996 / ISO 5864:1993 NUM 194
SANS 1700-2-5:2003 / ISO 965-1:1998 NUM 194
Fasteners Part 2: Screw threads Section 12: ISO inch screw
Fasteners Part 2: Screw threads Section 5: ISO general purpose
threads - Allowances and tolerances
metric screw threads - Tolerances - Principles and basic data
SANS 1700-2-18:2003 / ISO 68-2:1998 NUM 195
SANS 1700-2-6:2003 / ISO 965-2:1998 NUM 194
Fasteners Part 2: Screw threads Section 18: ISO general purpose
Fasteners Part 2: Screw threads Section 6: ISO general purpose
screw threads - Basic profile - Inch screw threads
metric screw threads - Tolerances - Limits of sizes for general
purpose external and internal screw threads - Medium quality
SANS 1700-2-7:2003 / ISO 965-3:1998 NUM 194 21.040.30 Special screw threads
________________________________________________________
Fasteners Part 2: Screw threads Section 7: ISO general purpose
metric screw threads - Tolerances - Deviations for constructional SANS 1109-1:2005 / ISO 7-1:1994 NUM 109
screw threads
Pipe threads where pressure-tight joints are made on the threads
SANS 1700-2-9:1996 / ISO 1502:1996 NUM 194 Part 1: Dimensions, tolerances and designation
Fasteners Part 2: Screw threads Section 9: ISO general-purpose SANS 1109-2:2005 / ISO 7-2:2000 NUM 109
metric screw threads - Gauges and gauging
Pipe threads where pressure-tight joints are made on the threads
SANS 1700-2-14:1996 / ISO 2901:1993 NUM 195 Part 2: Verification by means of limit gauges
Fasteners Part 2: Screw threads Section 14: ISO metric trapezoidal SANS 1700-2-8:1996 / ISO/R 1501:1970 NUM 194
screw threads - Basic profile and maximum material profiles
Fasteners Part 2: Screw threads Section 8: ISO miniature screw
SANS 1700-2-15:1996 / ISO 2902:1977 NUM 195 threads
Fasteners Part 2: Screw threads Section 15: ISO metric trapezoidal SANS 1700-2-13:2003 / ISO 1478:1999 NUM 195
screw threads - General plan
Fasteners Part 2: Screw threads Section 13: Tapping screws
SANS 1700-2-16:1996 / ISO 2903:1993 NUM 195 thread
Fasteners Part 2: Screw threads Section 16: ISO metric trapezoidal
screw threads - Tolerances
21.060.01 Fasteners in general
SANS 1700-2-17:1996 / ISO 2904:1977 NUM 195 ________________________________________________________
Fasteners Part 2: Screw threads Section 17: ISO metric trapezoidal SANS 1273:1979 NUM 133
screw threads - Basic dimensions Fasteners for roof and wall coverings in the form of sheeting
SANS 1700-2-19:2003 / ISO 965-4:1998 NUM 195
SANS 1700-1-1:1996 / ISO 1891:1979 NUM 193
Fasteners Part 2: Screw threads Section 19: ISO general purpose
metric screw threads - Tolerances - Limits of sizes for hot-dip Fasteners Part 1: Terminology and nomenclature Section 1: Bolts,
galvanized external screw threads to mate with internal screw screws, nuts and accessories
threads tapped with tolerance position H or G after galvanizing
SANS 1700-3-2:1996 / ISO 272:1982 NUM 196
SANS 1700-2-20:2003 / ISO 965-5:1998 NUM 195 Fasteners Part 3: Forms, dimensions and designations Section 2:
Fasteners Part 2: Screw threads Section 20: ISO general purpose Hexagon products - Widths across flats
metric screw threads - Tolerances - Limits of sizes for internal
screw threads to mate with hot-dip galvanized external screw SANS 1700-3-6:1996 / ISO 3508:1976 NUM 196
threads with maximum size of tolerance position h before Fasteners Part 3: Forms, dimensions and designations Section 6:
galvanizing Thread run-outs for fasteners with thread in accordance with ISO
261 and ISO 262
SANS 1700-3-6:1996 / ISO 3508:1976 NUM 196
Fasteners Part 3: Forms, dimensions and designations Section 6: SANS 1700-3-7:2003 / ISO 4753:1999 NUM 197
Thread run-outs for fasteners with thread in accordance with ISO Fasteners Part 3: Forms, dimensions and designations Section 7:
261 and ISO 262 Fasteners - Ends of parts with external ISO metric thread
SANS 1700-3-7:2003 / ISO 4753:1999 NUM 197 SANS 1700-3-8:1996 / ISO 4755:1983 NUM 197
Fasteners Part 3: Forms, dimensions and designations Section 7: Fasteners Part 3: Forms, dimensions and designations Section 8:
Fasteners - Ends of parts with external ISO metric thread Thread undercuts for external metric ISO threads
SANS 1700-3-8:1996 / ISO 4755:1983 NUM 197 SANS 1700-3-13:1996 / ISO 8991:1986 NUM 197
Fasteners Part 3: Forms, dimensions and designations Section 8: Fasteners Part 3: Forms, dimensions and designations Section 13:
Thread undercuts for external metric ISO threads Designation system for fasteners
SANS 1700-5-11:2003 / ISO 4042:1999 NUM 199 SANS 1700-3-5:1996 / ISO 888:1976 NUM 196
Fasteners Part 5: General requirements and mechanical properties Fasteners Part 3: Forms, dimensions and designations Section 5:
Section 11: Electroplated coatings Bolts, screws and studs - Nominal lengths, and thread lengths for
general purpose bolts
SANS 1700-5-16:2003 / ISO 10666:1999 NUM 200
Fasteners: Part 5: General requirements and mechanhical SANS 1700-3-9:1996 / ISO 4757:1983 NUM 197
properties Section 16: Drilling screws with tapping screw thread - Fasteners Part 3: Forms, dimensions and designations Section 9:
Mechanical and functional properties Cross recesses for screws
SANS 1700-5-18:2003 / ISO 10683:2000 NUM 200 SANS 1700-3-10:1996 / ISO 7378:1983 NUM 197
Fasteners Part 5: General requirements and mechanical properties Fasteners Part 3: Forms, dimensions and designations Section 10:
Section 18: Fasteners - Non-electrolytically applied zinc flake Bolts, screws and studs - Split pin holes and wire holes
coatings
SANS 1700-3-11:1996 / ISO 7721:1983 NUM 197
SANS 1700-6-2:2003 / ISO 3269:2000 NUM 200 Fasteners Part 3: Forms, dimensions and designations Section 11:
Fasteners Part 6: Testing and acceptance inspection Section 2: Countersunk head screws - Head configuration and gauging
Fasteners - Acceptance inspection
SANS 1700-3-12:1996 / ISO 7721-2:1990 NUM 197
SANS 1700-6-3:1996 / ISO 3800:1993 NUM 200 Fasteners Part 3: Forms, dimensions and designations Section 12:
Fasteners Part 6: Testing and acceptance inspection Section 3: Countersunk flat head screws - Penetration depth of cross
Threaded fasteners - Axial load fatigue testing - Test methods and recesses
evaluation of results
SANS 1700-4-1:2003 / ISO 4759-1:2000 NUM 197
SANS 1700-6-6:2003 / ISO 15330:1999 NUM 201 Fasteners Part 4: Tolerances Section 1: Tolerances for fasteners -
Fasteners Part 6: Testing and acceptance inspection Section 6: Bolts, screws, studs and nuts - Product grades A, B and C
Fasteners - Preloading test for the detection of hydrogen
embrittlement - Parallel bearing surface method SANS 1700-4-2:1996 / ISO 4759-2:1979 NUM 198
Fasteners Part 4: Tolerances Section 2: Bolts, screws and nuts
SANS 4042:1999 / ISO 4042:1999 NUM 262 with thread diameters from 1 up to 3 mm and product grade F for
Fasteners - Electroplated coatings (SABS 1700 Fasteners Part 5: fine mechanics
General requirements and mechanical properties Section 11)
SANS 1700-5-1:2003 / ISO 898-1:1999 NUM 198
Fasteners Part 5: General requirements and mechanical properties
21.060.10 Bolts, screws, studs Section 1: Mechanical properties of fasteners made of carbon steel
________________________________________________________ and alloy steel - Bolts, screws and studs
SANS 915:2007 NUM 90 SANS 1700-5-3:2003 / ISO 898-5:1998 NUM 198
Coach screws for light rails Fasteners Part 5: General requirements and mechanical properties
Section 3: Mechanical properties of fasteners made of carbon steel
SANS 916:2007 NUM 90 and alloy steel - Set screws and similar threaded fasteners not
under tensile stresses
Fishbolts and nuts for light rails
SANS 1700-5-6:1996 / ISO 2702:1992 NUM 199
SANS 962-1:2006 NUM 94 Fasteners Part 5: General requirements and mechanical properties
Mechanical fasteners for conveyor belts Part 1: Plate-and-bolt type Section 6: Heat-treated steel tapping screws
fasteners
SANS 1700-5-8:2003 / ISO 3506-1:1997 NUM 199
SANS 1143:2002 NUM 114 Fasteners Part 5: General requirements and mechanical properties
Mushroom- and countersunk-head bolts and nuts Section 8: Mechanical properties of corrosion-resistant stainless-
steel fasteners - Bolts, screws and studs
SANS 1171:2006 NUM 116 SANS 1700-5-10:2003 / ISO 3506-3:1997 NUM 199
Metal screws for wood Fasteners Part 5: General requirements and mechanical properties
Section 10: Mechanical properties of corrosion-resistant stainless-
SANS 1408:2002 NUM 153 steel fasteners - Set screws and similar fasteners not under tensile
stress
Mechanical components for tendon based rock support systems
SANS 1700-5-12:1996 / ISO 6157-1:1988 NUM 199
SANS 1700-3-1:1996 / ISO 225:1983 NUM 196 Fasteners Part 5: General requirements and mechanical properties
Fasteners Part 3: Forms, dimensions and designations Section 1: Section 12: Surface discontinuities - Bolts, screws and studs for
Bolts, screws, studs and nuts - Symbols and designations of general requirements
dimensions
SANS 1700-5-13:1996 / ISO 6157-3:1988 NUM 199
SANS 1700-3-3:1996 / ISO 273:1979 NUM 196 Fasteners Part 5: General requirements and mechanical properties
Fasteners Part 3: Forms, dimensions and designations Section 3: Section 13: Surface discontinuities - Bolts, screws and studs for
Clearance holes for bolts and screws special requirements
SANS 1700-3-4:2003 / ISO 885:2000 NUM 196 SANS 1700-5-14:1996 / ISO 8839:1986 NUM 200
Fasteners Part 3: Forms, dimensions and designations Section 4: Fasteners Part 5: General requirements and mechanical properties
General purpose bolts and screws - Metric series - Radii under the Section 14: Bolts, screws, studs and nuts made of non-ferrous
head metals
SANS 1700-5-15:1996 / ISO 8992:1986 NUM 200 SANS 1700-9-2:1996 / ISO 7379:1983 NUM 203
Fasteners Part 5: General requirements and mechanical properties Fasteners Part 9: Hexagon socket head screws Section 2:
Section 15: Bolts, screws, studs and nuts Hexagon socket head shoulder screws
SANS 1700-5-17:2003 / ISO 7085:1999 NUM 200 SANS 1700-9-3:1998 / ISO 7380:1997 NUM 203
Fasteners Part 5: General requirements and mechanical properties Fasteners Part 9: Hexagon socket head screws Section 3:
Section 17: Mechanical and performance requirements of case Hexagon socket button head screws
hardened and tempered metric thread rolling screws
SANS 1700-9-4:1998 / ISO 10642:1997 NUM 203
SANS 1700-7-1:2003 / ISO 4014:1999 NUM 201 Fasteners Part 9: Hexagon socket head screws Section 4:
Fasteners Part 7: External drive hexagon bolts and screws Section Hexagon socket countersunk head screws
1: Hexagon head bolts - Product grades A and B
SANS 1700-9-5:2003 / ISO 10664:1999 NUM 203
SANS 1700-7-2:1996 / ISO 4015:1979 NUM 201 Fasteners Part 9: Hexagon socket head screws Section 5:
Fasteners Part 7: External drive hexagon bolts and screws Section Hexalobular internal driving feature for bolts and screws
2: Hexagon head bolts - Product grade B - Reduced shank (shank
diameter approximately equal to pitch diameter) SANS 1700-10-1:1996 / ISO 1207:1992 NUM 203
Fasteners Part 10: Slotted head screws Section 1: Slotted cheese
SANS 1700-7-3:2003 / ISO 4016:1999 NUM 201 head screws - Product grade A
Fasteners Part 7: External drive hexagon bolts and screws Section
3: Hexagon head bolts - Product grade C SANS 1700-10-2:1996 / ISO 1580:1994 NUM 203
Fasteners Part 10: Slotted head screws Section 2: Slotted pan
SANS 1700-7-4:2003 / ISO 4017:1999 NUM 201 head screws - Product grade A
Fasteners Part 7: External drive hexagon bolts and screws Section
4: Hexagon head screws - Product grades A and B SANS 1700-10-3:1996 / ISO 2009:1994 NUM 203
Fasteners Part 10: Slotted head screws - Section 3: Slotted
SANS 1700-7-5:2003 / ISO 4018:1999 NUM 201 countersunk flat head screws (common head style) - Product grade
Fasteners Part 7: External drive hexagon bolts and screws Section A
5: Hexagon head screws - Product grade C
SANS 1700-10-4:1996 / ISO 2010:1994 NUM 204
SANS 1700-7-6:2003 / ISO 4162:1990 NUM 202 Fasteners Part 10: Slotted head screws Section 4: Countersunk
Fasteners Part 7: External drive hexagon bolts and screws Section slotted raised head screws (common head style) - Product grade A
6: Hexagon flange bolts - Small series
SANS 1700-11-1:1996 / ISO 7045:1994 NUM 204
SANS 1700-7-7:2003 / ISO 7411:1984 NUM 202 Fasteners Part 11: Cross recessed countersunk flat head screws
Fasteners Part 7: External drive hexagon bolts and screws Section (common head style) - Grade A Section 1: Pan head screws with
7: Hexagon bolts for high-strength structural bolting with large width type H or type Z cross recess - Product grade A
across flats (thread lengths according to SABS ISO 888) - Product
grade C - Property classes 8.8 and 10.9 SANS 1700-11-2:1996 / ISO 7046-1:1994 NUM 204
Fasteners Part 11: Countersunk flat head screws(common head
SANS 1700-7-8:2003 / ISO 7412:1984 NUM 202 style) with type H or type Z cross recess - Product grade A Section
Fasteners Part 7: External drive hexagon bolts and screws Section 2: Steel of property class 4.8
8: Hexagon bolts for high-strength structural bolting with large width
across flats (short thread length) - Product grade C - Property SANS 1700-11-3:1996 / ISO 7046-2:1990 NUM 204
classes 8.8 and 10.9 Fasteners Part 11: Cross recessed countersunk flat head screws
(common head style) - Grade A Section 3: Steel of property class
SANS 1700-7-9:2003 / ISO 8676:1999 NUM 202 8.8, stainless steel and non-ferrous metals
Fasteners Part 7: External drive hexagon bolts and screws Section
9: Hexagon head screws with metric fine pitch thread - Product SANS 1700-11-4:1996 / ISO 7047:1994 NUM 204
grades A and B Fasteners Part 11: Cross recessed head screws Section 4:
Countersunk raised head screws (common head style) with type H
SANS 1700-7-10:2003 / ISO 8765:1999 NUM 202 or type Z cross recess - Product grade A
Fasteners Part 7: External drive hexagon bolts and screws Section
10 : Hexagon head bolts with metric fine pitch thread - Product SANS 1700-11-5:2003 / ISO 7048:1998 NUM 204
grades A and B Fasteners Part 11: Cross recessed head screws Section 5: Cross
recessed cheese head screws
SANS 1700-7-11:2003 / ISO 15071:1999 NUM 202
Fasteners Part 7: External drive hexagon bolts and screws Section SANS 1700-12-1:2004 / ISO 2342:2003 NUM 204
11: Hexagon bolts with flange - Small series - Product grade A Fasteners Part 12: Set screws Section 1: Slotted headless screws
with shank
SANS 1700-7-12:2003 / ISO 15072:1999 NUM 202
Fasteners Part 7: External drive hexagon bolts and screws Section SANS 1700-12-2:2004 / ISO 4026:2003 NUM 205
12: Hexagon bolts with flange with metric fine pitch thread - Small Fasteners Part 12: Set screws Section 2: Hexagon socket set
series - Product grade A screws with flat point
SANS 1700-8-2:1996 / ISO 8678:1988 NUM 202 SANS 1700-12-3:1996 / ISO 4027:1993 NUM 205
Fasteners Part 8: Square neck bolts Section 2: Cup head square Fasteners Part 12: Set screws Section 3: Hexagon socket set
neck bolts with small head and short neck - Product grade B screws with cone point
SANS 1700-9-1:1998 / ISO 4762:1997 NUM 203 SANS 1700-12-4:2004 / ISO 4028:2003 NUM 205
Fasteners Part 9: Hexagon socket head screws Section 1: Fasteners Part 12: Set screws Section 4: Hexagon socket set
Hexagon socket head cap screws screws with dog point
SANS 1700-12-5:2004 / ISO 4029:2003 NUM 205 SANS 1700-19-2:2003 / ISO 14580:2001 NUM 218
Fasteners Part 12: Set screws Section 5: Hexagon socket set Fasteners Part 19: Hexalobular socket head screws Section 2:
screws with cup point Hexalobular socket cheese head screws
SANS 1700-12-6:1996 / ISO 4766:1983 NUM 205 SANS 1700-19-3:2003 / ISO 14583:2001 NUM 218
Fasteners Part 12: Set screws Section 6: Slotted set screws with Fasteners Part 19: Hexalobular socket head screws Section 3:
flat point Hexalobular socket pan head screws
SANS 1700-12-7:1996 / ISO 7434:1983 NUM 205 SANS 1700-19-4:2003 / ISO 14584:2001 NUM 218
Fasteners Part 12: Set screws Section 7: Slotted set screws with Fasteners Part 19: Hexalobular socket head screws Section 4:
cone point Hexalobular socket raised countersunk head screws
SANS 1700-12-8:1996 / ISO 7435:1983 NUM 205 SANS 1700-19-5:2003 / ISO 14585:2001 NUM 218
Fasteners Part 12: Set screws Section 8: Slotted set screws with Fasteners Part 19: Hexalobular socket head screws Section 5:
long dog point Hexalobular socket pan head tapping screws
SANS 1700-12-9:1996 / ISO 7436:1983 NUM 205 SANS 1700-19-6:2003 / ISO 14586:2001 NUM 218
Fasteners Part 12: Set screws Section 9: Slotted set screws with Fasteners Part 19: Hexalobular socket head screws Section 6:
cup point Hexalobular socket raised countersunk head tapping screws
SANS 1700-13-1:1996 / ISO 1479:1983 NUM 206 SANS 1700-19-7:2003 / ISO 14587:2001 NUM 218
Fasteners Part 13: Tapping screws Section 1: Hexagon head Fasteners Part 19: Hexalobular socket head screws Section 7:
tapping screws Hexalobular socket raised countersunk (oval) head tapping screws
SANS 1700-13-2:1996 / ISO 1481:1983 NUM 206 SANS 10094:2005 NUM 413
Fasteners Part 13: Tapping screws Section 2: Slotted pan head The use of high-strength friction-grip bolts
tapping screws
SANS 1700-13-10:2003 / ISO 15481:1999 NUM 207 SANS 1700-5-2:1996 / ISO 898-2:1992 NUM 198
Fasteners Part 13: Tapping screws Section 10: Cross recessed Fasteners Part 5: General requirements and mechanical properties
pan head drilling screws with tapping screw thread Section 2: Nuts with specified proof load values - Coarse thread
SANS 1700-13-11:2003 / ISO 15482:1999 NUM 207 SANS 1700-5-4:1996 / ISO 898-6:1994 NUM 198
Fasteners Part 13: Tapping screws Section 11: Cross recessed Fasteners Part 5: General requirements and mechanical properties
countersunk head drilling screws with tapping screw thread Section 4: Nuts with specified proof load values - Fine pitch thread
SANS 1700-13-12:2003 / ISO 15483:1999 NUM 207 SANS 1700-5-5:2003 / ISO 2320:1997 NUM 198
Fasteners Part 13: Tapping screws Section 12: Cross recessed Fasteners Part 5: General requirements and mechanical properties
raised countersunk head drilling screws with tapping screw thread Section 5: Prevailing torque type steel hexagon nuts - Mechanical
and performance properties
SANS 1700-19-1:2003 / ISO 14579:2001 NUM 217
Fasteners Part 19: Hexalobular socket head screws Section 1:
Hexalobular socket head cap screws
SANS 1700-5-9:2003 / ISO 3506-2:1997 NUM 199 SANS 1700-14-15:2003 / ISO 10663:1999 NUM 209
Fasteners Part 5: General requirements and mechanical properties Fasteners Part 14: Hexagon nuts Section 15: Hexagon nuts with
Section 9: Mechanical properties of corrosion-resistant stainless- flange - Fine pitch thread
steel fasteners - Nuts
SANS 1700-15-1:1998 / ISO 7040:1997 NUM 209
SANS 1700-5-14:1996 / ISO 8839:1986 NUM 200 Fasteners Part 15: Prevailing torque type nuts Section 1: Prevailing
Fasteners Part 5: General requirements and mechanical properties torque type hexagon nuts (with non-metallic insert), style 1 -
Section 14: Bolts, screws, studs and nuts made of non-ferrous Property classes 5, 8 and 10
metals
SANS 1700-15-2:2007 / ISO 7041:2002 NUM 209
SANS 1700-5-15:1996 / ISO 8992:1986 NUM 200 Fasteners Part 15: Prevailing torque type nuts Section 2: Prevailing
Fasteners Part 5: General requirements and mechanical properties torque type hexagon nuts (with non-metallic insert), style 2 -
Section 15: Bolts, screws, studs and nuts Property classes 9 and 12
SANS 1700-6-5:1998 / ISO 10484:1997 NUM 201 SANS 1700-15-3:1998 / ISO 7042:1997 NUM 209
Fasteners Part 6: Testing and acceptance inspection Section 5: Fasteners Part 15: Prevailing torque type nuts Section 3: Prevailing
Widening test on nuts torque type all-metal hexagon nuts, style 2 - Property classes 5, 8,
10 and 12
SANS 1700-14-1:2003 / ISO 4032:1999 NUM 207
Fasteners Part 14: Hexagon nuts Section 1: Hexagon nuts, style 1 - SANS 1700-15-4:1998 / ISO 7043:1997 NUM 209
Product grades A and B Fasteners Part 15: Prevailing torque type nuts Section 4: Prevailing
torque type hexagon nuts with flange (with non-metallic insert) -
SANS 1700-14-2:2003 / ISO 4033:1999 NUM 207 Product grades A and B
Fasteners Part 14: Hexagon nuts Section 2: Hexagon nuts, style 2 -
Product grades A and B SANS 1700-15-5:1998 / ISO 7044:1997 NUM 209
Fasteners Part 15: Prevailing torque type nuts Section 5: Prevailing
SANS 1700-14-3:2003 / ISO 4034:1999 NUM 207 torque type all-metal hexagon nuts with flange - Product grades A
Fasteners Part 14: Hexagon nuts Section 3: Hexagon nuts - and B
Product grade C
SANS 1700-15-6:1998 / ISO 7719:1997 NUM 209
SANS 1700-14-4:2003 / ISO 4035:1999 NUM 207 Fasteners Part 15: Prevailing torque type nuts Section 6: Prevailing
Fasteners Part 14: Hexagon nuts Section 4: Hexagon thin nuts torque type all-metal hexagon nuts, style 1 - Property classes 5, 8
(chamfered) - Product grades A and B and 10
SANS 1700-14-5:2003 / ISO 4036:1999 NUM 207 SANS 1700-15-7:1998 / ISO 7720:1997 NUM 210
Fasteners Part 14: Section 5: Hexagon thin nuts (unchamfered) - Fasteners Part 15: Prevailing torque type nuts Section 7: Prevailing
Product grade B torque type all-metal hexagon nuts, style 2 - Property class 9
SANS 1700-14-6:2003 / ISO 4161:1999 NUM 208 SANS 1700-15-8:1998 / ISO 10511:1997 NUM 210
Fasteners Part 14: Hexagon nuts Section 6: Hexagon nuts with Fasteners Part 15: Prevailing torque type nuts Section 8: Prevailing
flange - Coarse thread torque type hexagon thin nuts (with non-metallic insert)
SANS 1700-14-8:2003 / ISO 4775:1984 NUM 208 SANS 1700-15-9:1998 / ISO 10512:1997 NUM 210
Fasteners Part 14: Hexagon nuts Section 8: Hexagon nuts for high- Fasteners Part 15: Prevailing torque type nuts Section 9: Prevailing
strength structural bolting with large width across flats - Product torque type hexagon nuts (with non-metallic insert), style 1, with
grade B - Property classes 8 and 10 metric fine pitch thread - Property classes 6, 8 and 10
SANS 1700-14-9:1996 / ISO 7413:1984 NUM 208 SANS 1700-15-10:1998 / ISO 10513:1997 NUM 210
Fasteners Part 14: Hexagon nuts Section 9: Hexagon nuts for Fasteners Part 15: Prevailing torque type nuts Section 10:
structural bolting, style 1, hot-dip galvanized (oversize tapped) - Prevailing torque type all-metal hexagon nuts, style 2, with metric
Product grades A and B - Property classes 5, 6 and 8 fine pitch thread - Property classes 8, 10 and 12
SANS 1700-14-10:2003 / ISO 7414:1984 NUM 208 SANS 1700-15-11:1998 / ISO 12125:1997 NUM 210
Fasteners Part 14: Hexagon nuts Section 10: Hexagon nuts for Fasteners Part 15: Prevailing torque type nuts Section 11:
structural bolting with large width across flats, style 1 - Product Prevailing torque type hexagon nuts with flange (with non-metallic
grade B - Property class 10 insert) with metric fine pitch thread - Product grades A and B
SANS 1700-14-11:2003 / ISO 7417:1984 NUM 208 SANS 1700-15-12:1998 / ISO 12126:1997 NUM 210
Fasteners Part 14: Hexagon nuts Section 11: Hexagon nuts for Fasteners Part 15: Prevailing torque type nuts Section 12:
structural bolting, Style 2, hot-dip galvanized (oversize tapped) - Prevailing torque type all-metal hexagon nuts with flange with
Product grade A - Property class 9 metric fine pitch thread - Product grades A and B
SANS 1700-16-2:2003 / ISO 7089:2000 NUM 211 SANS 1700-18-2:2004 / ISO 14588:2000 NUM 215
Fasteners Part 16: Washers Section 2: Plain washers - Normal Fasteners Part 18: Rivets Section 2: Blind rivets - Terminology and
series - Product grade A definitions
SANS 1700-16-3:2003 / ISO 7090:2000 NUM 211 SANS 1700-18-3:2004 / ISO 14589:2000 NUM 216
Fasteners Part 16: Washers Section 3: Plain washers, chamfered - Fasteners Part 18: Rivets Section 3: Blind rivets - Mechanical
Normal series - Product grade A testing
SANS 1700-16-4:2003 / ISO 7091:2000 NUM 211 SANS 1700-18-4:2004 / ISO 15973:2000 NUM 216
Fasteners Part 16: Washers Section 4: Plain washers - Normal Fasteners Part 18: Rivets Section 4: Closed end blind rivets with
series - Product grade C break pull mandrel and protruding head - AIA/St
SANS 1700-16-5:2003 / ISO 7092:2000 NUM 211 SANS 1700-18-5:2004 / ISO 15974:2000 NUM 216
Fasteners Part 16: Washers Section 5: Plain washers - Small Fasteners Part 18: Rivets Section 5: Closed end blind rivets with
series - Product grade A break pull mandrel and countersunk head - AIA/St
SANS 1700-16-6:2003 / ISO 7093-1:2000 NUM 211 SANS 1700-18-6:2004 / ISO 15975:2002 NUM 216
Fasteners Part 16: Washers Section 6: Plain washers - Large Fasteners Part 18: Rivets Section 6: Closed end blind rivets with
series - Product grade A break pull mandrel and protruding head - AI/AIA
SANS 1700-16-7:2003 / ISO 7094:2000 NUM 211 SANS 1700-18-7:2004 / ISO 15976:2002 NUM 216
Fasteners Part 16: Washers Section 7: Plain washers - Extra large Fasteners Part 18: Rivets Section 7: Closed end blind rivets with
series - Product grade C break pull mandrel and protruding head - St/St
SANS 1700-16-8:2004 / ISO 7415:1984 NUM 211 SANS 1700-18-8:2004 / ISO 15977:2002 NUM 216
Fasteners Part 16: Washers Section 8: Plain washers for high- Fasteners Part 18: Rivets Section 8: Open end blind rivets with
strength structural bolting, hardened and tempered break pull mandrel and protruding head - AIA/St
SANS 1700-16-9:2004 / ISO 7416:1984 NUM 211 SANS 1700-18-9:2004 / ISO 15978:2002 NUM 216
Fasteners Part 16: Washers Section 9: Plain washers, chamfered, Fasteners Part 18: Rivets Section 9: Open end blind rivets with
hardened, and tempered for high-strength structural bolting break pull mandrel and countersunk head - AIA/St
SANS 1700-16-10:1996 / ISO 8738:1986 NUM 211 SANS 1700-18-10:2004 / ISO 15979:2002 NUM 216
Fasteners Part 16: Washers Section 10: Plain washers for clevis Fasteners Part 18: Rivets Section 10: Open end blind rivets with
pins - Product grade A break pull mandrel and protruding head - St/St
SANS 1700-16-14:2003 / ISO 7093-2:2000 NUM 212 SANS 1700-18-11:2004 / ISO 15980:2002 NUM 216
Fasteners Part 16: Washers Section 14: Plain washers - Large Fasteners Part 18: Rivets Section 11: Open end blind rivets with
series - Product grade C break pull mandrel and countersunk head - St/St
SANS 1700-16-15:2003 / ISO 10644:1998 NUM 212 SANS 1700-18-12:2004 / ISO 15981:2002 NUM 217
Fasteners Part 16: Washers Section 15: Screw and washer Fasteners Part 18: Rivets Section 12: Open end blind rivets with
assemblies with plain washers - Washer hardness classes 200 HV break pull mandrel and protruding head - AIA/AIA
and 300 HV
SANS 1700-18-13:2004 / ISO 15982:2002 NUM 217
SANS 1700-16-16:2003 / ISO 10669:1999 NUM 212 Fasteners Part 18: Rivets Section 13: Open end blind rivets with
Fasteners Part 16: Washers Section 16: Plain washers for tapping break pull mandrel and countersunk head - AIA/AIA
screw and washer assemblies - Normal and large series - Product
grade A SANS 1700-18-14:2004 / ISO 15983:2002 NUM 217
Fasteners Part 18: Rivets Section 14: Open end blind rivets with
SANS 1700-16-17:2003 / ISO 10673:1998 NUM 212 break pull mandrel and protruding head - A2/A2
Fasteners Part 16: Washers Section 17: Plain washers for screw
and washer assemblies - Small, normal and large series - Product SANS 1700-18-15:2004 / ISO 15984:2002 NUM 217
grade A Fasteners Part 18: Rivets Section 15: Open end blind rivets with
break pull mandrel and countersunk head - A2/A2
SANS 60372:1984 / IEC 60372:1984 NUM 629
Locking devices for ball and socket couplings of string insulator SANS 1700-18-16:2004 / ISO 16582:2002 NUM 217
units - Dimensions and tests Fasteners Part 18: Rivets Section 16: Open end blind rivets with
break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt
SANS 1700-18-1:2003 / ISO 1051:1999 Fasteners Part 18: Rivets Section 18: Open end blind rivets with
NUM 215
break pull mandrel and protruding head - NiCu/St or NiCu/SSt
Fasteners Part 18: Rivets Section 1: Rivet shank diameters
SANS 1700-18-19:2004 / ISO 16585:2002 NUM 217
Fasteners Part 18: Rivets Section 19: Closed end blind rivets with
pull mandrel and protruding head - A2/SSt
Fasteners Part 17: Pins Section 1: Split pins SANS 1700-17-20:1998 / ISO 8748:1997 NUM 215
Fasteners Part 17: Pins Section 20: Spring-type straight pins -
SANS 1700-17-2:1998 / ISO 2338:1997 NUM 212 Coiled, heavy duty
Fasteners Part 17: Pins Section 2: Parallel pins, of unhardened
SANS 1700-17-21:1998 / ISO 8750:1997 NUM 215
steel and austenitic stainless steel
Fasteners Part 17: Pins Section 21: Spring-type straight pins -
SANS 1700-17-3:1996 / ISO 2339:1986 NUM 212 Coiled, standard duty
Fasteners Part 17: Pins Section 3: Taper pins, unhardened
SANS 1700-17-22:1998 / ISO 8751:1997 NUM 215
Fasteners Part 17: Pins Section 22: Spring-type straight pins -
SANS 1700-17-4:1996 / ISO 2340:1986 NUM 212 Coiled, light duty
Fasteners Part 17: Pins Section 4: Clevis pins without head
SANS 1700-17-23:1998 / ISO 8752:1997 NUM 215
SANS 1700-17-5:1996 / ISO 2341:1986 NUM 213 Fasteners Part 17: Pins Section 23: Spring-type straight pins -
Slotted, heavy duty
Fasteners Part 17: Pins Section 5: Clevis pins with head
SANS 1700-17-24:1998 / ISO 13337:1997 NUM 215
SANS 1700-17-6:1998 / ISO 8733:1997 NUM 213 Fasteners Part 17: Pins Section 24: Spring-type straight pins -
Fasteners Part 17: Pins Section 6: Parallel pins with internal Slotted, light duty
thread, of unhardened steel and austenitic stainless steel
SANS 1700-17-7:1998 / ISO 8734:1997 NUM 213 21.060.70 Clamps and staples
Fasteners Part 17: Pins Section 7: Parallel pins, of hardened steel ________________________________________________________
and martensitic stainless steel (Dowel pins)
SANS 813:2005 NUM 84
SANS 1700-17-8:1998 / ISO 8735:1997 NUM 213 Clamps for wire ropes
Fasteners Part 17: Pins Section 8: Parallel pins with internal
thread, of hardened steel and martensitic stainless steel SANS 1808-45:2005 NUM 228
SANS 1700-17-9:1996 / ISO 8736:1986 NUM 213 Water supply and distribution system components Part 45: Pipe
repair clamps
Fasteners Part 17: Pins Section 9: Taper pins with internal thread,
unhardened SANS 2262:1984 / ISO 2262:1984 NUM 248
SANS 1700-17-10:1996 / ISO 8737:1986 NUM 213 General purpose thimbles for use with steel wire ropes -
Specification
Fasteners Part 17: Pins Section 10: Taper pins with external
thread, unhardened CKS 263:1970 NUM 738
SANS 1700-17-11:1998 / ISO 8739:1997 NUM 213 Clamps for hospital beds
Fasteners Part 17: Pins Section 11: Grooved pins - Full-length
parallel grooved, with pilot
21.060.99 Other fasteners
SANS 1700-17-12:1998 / ISO 8740:1997 NUM 214 ________________________________________________________
Fasteners Part 17: Pins Section 12: Grooved pins - Full-length
SANS 814:1979 NUM 84
parallel grooved, with chamfer
General purpose and aircraft hose clips (Worm-drive Type)
SANS 1700-17-13:1998 / ISO 8741:1997 NUM 214
Fasteners Part 17: Pins Section 13: Grooved pins - Half-length SANS 913:2007 NUM 89
reverse-taper grooved
Springspikes for light rails
SANS 1700-17-14:1998 / ISO 8742:1997 NUM 214
Fasteners Part 17: Pins Section 14: Grooved pins - One-third- SANS 914:2007 NUM 90
length centre grooved Fishplates for light rails
SANS 1700-17-16:1998 / ISO 8744:1997 NUM 214 SANS 51075:1999 / EN 1075:1999 NUM 587
Fasteners Part 17: Pins Section 16: Grooved pins - Full-length Timber structures - Test methods - Joints made with punched
taper grooved metal plate fasteners
SANS 11687-3:2005 / ISO 11687-3:1995 NUM 498 SANS 353:2005 / ISO 113:1999 NUM 46
Plain bearings - Pedestal plain bearings Part 3: Centre flange Rolling bearings - Plummer block housings - Boundary dimensions
bearings
SANS 12044:2006 / ISO 12044:1995 NUM 503 SANS 6971:2006 / ISO 6971:2002 NUM 370
Rolling bearings - Single-row angular contact ball bearings - Cranked-link drag chains of welded construction, attachments and
Chamfer dimensions for outer ring non-thrust side sprockets
SANS 4347:2006 / ISO 4347:2004 NUM 264 SANS 10131:2004 NUM 445
Leaf-chains, clevises and sheaves - Dimensions, measuring forces Above-ground storage tanks for petroleum products
and tensile strengths
SANS 4778:1981 / ISO 4778:1981 NUM 272 SANS 10132:1983 NUM 445
Chain slings of welded construction - Grades M(4), S(6) and T(8) The installation and operation of refrigerated milk tanks
SANS 10329:2004 NUM 478 SANS 9809-2:2000 / ISO 9809-2:2000 NUM 402
The design and construction of sectional steel tanks for storage of Gas cylinders - Refillable seamless steel gas cylinders - Design,
liquids at or above ground level construction and testing Part 2: Quenched and tempered steel
cylinders with tensile strength greater than or equal to 1 100 MPa
23.020.20 Vessels and containers mounted on SANS 9809-3:2000 / ISO 9809-3:2000 NUM 402
vehicles Gas cylinders - Refillable seamless steel gas cylinders - Design,
________________________________________________________ construction and testing Part 3: Normalized steel cylinders
SANS 1187:1985 NUM 119 SANS 10006:2006 NUM 405
Tanks and ancillary equipment for milk tankers Colour marking and identification of medical gas cylinders and
anaesthetic apparatus
SANS 1306-1:2006 / ISO 228-1:2000 NUM 136 SANS 10120-4 LB:1983 NUM 437
Pipe threads where pressure-tight joints are not made on the Code of practice for use with standardized specifications for civil
threads Part 1: Dimensions, tolerances and designation engineering construction and contract documents Part 4: Typical
schedule of quantities Section LB: Bedding (pipes)
SANS 1306-2:1990 / ISO 228-2:1987 NUM 137
SANS 10120-4 LG:1983 NUM 438
Pipe threads where pressure-tight joints are not made on the
threads Part 2: Verification by means of limit gauges Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical
SANS 1830:2006 NUM 231 schedule of quantities Section LG: Pipe jacking
Flexible piping for underground use at service stations and SANS 10120-5 L:1983 NUM 442
consumer installations
Code of practice for use with standardized specifications for civil
SANS 6077:2006 NUM 340 engineering construction and contract documents Part 5: Contract
administration Section L: Medium-pressure pipelines
Fire test for valves and other assemblies used in fire-hazardous
situations SANS 10120-5 LB:1983 NUM 442
SANS 10102-1:2005 NUM 414 Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 5: Contract
The selection of pipes for buried pipelines Part 1: General
administration Section LB: Bedding (pipes)
provisions
SANS 10120-5 LG:1983 NUM 443
SANS 10102-2:1987 NUM 415
Code of practice for use with standardized specifications for civil
Selection of pipes for buried pipelines Part 2: Rigid pipes
engineering construction and contract documents Part 5: Contract
administration Section LG: Pipe jacking
SANS 10120-2 TO 5 L SET NUM 421
SANS 10140-3:2003 NUM 446
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 Identification colour markings Part 3: Contents of pipelines
Section L: Medium-pressure pipelines
SANS 10224:1990 NUM 462
SANS 10120-2 TO 5 LB SET NUM 421
Non-flammable medical gas pipeline systems
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5
Section LB: Bedding (pipes) SANS 10260-1:2004 NUM 467
Industrial gas pipelines Part 1: Distribution of oxygen, nitrogen and
SANS 10120-2 TO 5 LG SET NUM 422 argon at consumer sites
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 SANS 10260-2:2004 NUM 467
Section LG: Pipe jacking Industrial gas pipelines Part 2: Distribution of hydrogen at
consumer sites
SANS 10120-2 L:1983 NUM 426
Code of practice for use with standardized specifications for civil SANS 10260-3:2004 NUM 468
engineering construction and contract documents Part 2: Project Industrial gas pipelines Part 3: Distribution of acetylene at
specification Section L: Medium-pressure pipelines consumer sites
SANS 10120-2 LB:1983 NUM 427 SANS 10260-4:2004 NUM 468
Code of practice for use with standardized specifications for civil Industrial gas pipelines Part 4: Distribution of carbon dioxide at
engineering construction and contract documents Part 2: Project consumer sites
specification Section LB: Bedding (pipes)
SANS 12294:1999 / EN 12294:1999 NUM 505
SANS 10120-2 LG:1983 NUM 427
Plastics piping systems - Systems for hot and cold water - Test
Code of practice for use with standardized specifications for civil method for leaktightness under vacuum
engineering construction and contract documents Part 2: Project
specification Section LG: Pipe jacking
SANS 15494:2005 / ISO 15494:2003 NUM 530 SANS 1201:2005 NUM 125
Plastics piping systems for industrial applications - Polybutene The application of rubber linings to pipes, pipe fittings and vessels
(PB), polyethylene (PE) and polypropylene (PP) - Specifications for
components and the system - Metric series
SANS 1217:2001 NUM 127
SANS 15874-1:2004 / ISO 15874-1:2003 NUM 534 The production of painted and powder-coated steel pipes
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) Part 1: General SANS 1476:2006 NUM 165
Fabricated flanged steel pipework
SANS 15874-5:2004 / ISO 15874-5:2003 NUM 534
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) Part 5: Fitness for purpose of the system SANS 1835:2002 NUM 234
Ductile iron pipes, fittings, accessories and their joints, for use in
SANS 15875-1:2004 / ISO 15875-1:2003 NUM 534 high and low pressure systems for potable and foul water
Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) Part 1: General SANS 10129:2006 NUM 445
Plastics tape wrapping of steel pipelines
SANS 15875-2:2004 / ISO 15875-2:2003 NUM 534
Plastics piping systems for hot and cold water installations - SANS 50545:2003 / EN 545:2002 NUM 580
Crosslinked polyethylene (PE-X) Part 2: Pipes
Ductile iron pipes, fittings, accessories and their joints for water
SANS 15875-3:2004 / ISO 15875-3:2003 NUM 535 pipelines - Requirements and test methods
Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) Part 3: Fittings
23.040.20 Plastics pipes
SANS 15875-5:2004 / ISO 15875-5:2003 NUM 535 ________________________________________________________
Plastics piping systems for hot and cold water installations - SANS 11:2007 NUM 1
Crosslinked polyethylene (PE-X) Part 5: Fitness for purpose of the Unplasticized poly(vinyl chloride) (PVC-U) components for external
system rainwater systems
SANS 1748-3:2007 NUM 222 SANS 11922-1:1997 / ISO 11922-1:1997 NUM 502
Glass-fibre-reinforced thermosetting plastics (GRP) pipes Part 3: Thermoplastics pipes for the conveyance of fluids - Dimensions
Pipes, fittings and ancilliaries for underground (buried) fire and tolerances Part 1: Metric series
protection services
SANS 12293:1999 / EN 12293:1999 NUM 505
SANS 1808-85:2004 NUM 229 Plastics piping systems - Thermoplastics pipes and fittings for hot
Water supply and distribution systems Part 85: Oriented polyvinyl and cold water - Test method for the resistance of mounted
chloride (PVC-O) pressure pipes for underground use assemblies to temperature cycling
SANS 2505:2007 / ISO 2505:2005 NUM 251 SANS 12295:1999 / EN 12295:1999 NUM 505
Thermoplastics pipes - Longitudinal reversion - Test method and Plastics piping systems - Thermoplastics pipes and associated
parameters fittings for hot and cold water - Test method for resistance of joints
to pressure cycling
SANS 2507-1:1995 / ISO 2507-1:1995 NUM 251
Thermoplastics pipes and fittings - Vicat softening temperature Part SANS 13760:1998 / ISO 13760:1998 NUM 513
1: General test method Plastics pipes for the conveyance of fluids under pressure - Miner's
rule - Calculation method for cumulative damage
SANS 3126:1974 / ISO 3126:1974 NUM 254
Plastics pipes - Measurement of dimensions SANS 15874-2:2004 / ISO 15874-2:2003 NUM 534
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) Part 2: Pipes
SANS 3127:1994 / ISO 3127:1994 NUM 254
Thermoplastics pipes - Determination of resistance to external SANS 15877-1:2005 / ISO 15877-1:2003 NUM 535
blows - Round-the-clock method Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride)(PVC-C) Part 1: General
SANS 4065:1996 / ISO 4065:1996 NUM 263
Thermoplastics pipes - Universal wall thickness table SANS 15877-2:2005 / ISO 15877-2:2003 NUM 535
Plastics piping systems for hot and cold water installations -
SANS 4437:1997 / ISO 4437:1997 NUM 266 Chlorinated poly(vinyl chloride)(PVC-C) Part 2: Pipes
Buried polyethylene (PE) pipes for the supply of gaseous fuels -
SANS 15877-3:2005 / ISO 15877-3:2003 NUM 536
Metric series - Specifications
Plastics piping systems for hot and cold water installations -
SANS 6993:2004 / ISO 6993:2001 NUM 371 Chlorinated poly(vinyl chloride)(PVC-C) Part 3: Fittings
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the
SANS 15877-5:2005 / ISO 15877-5:2003 NUM 536
supply of gaseous fuels - Specifications
Plastics piping systems for hot and cold water installations -
SANS 7682:2006 / ISO 7682:2003 NUM 375 Chlorinated poly(vinyl chloride)(PVC-C) Part 5: Fitness for purpose
Plastics piping systems for soil and waste discharge (low and high of the system
temperature) inside buildings - Acrylonitrile-butadiene-styrene
SANS 50578:1993 / EN 578:1993 NUM 581
(ABS)
Plastics piping systems - Plastics pipes and fittings - Determination
SANS 8773:2007 / ISO 8773:2006 NUM 391 of the opacity
Plastics piping systems for non-pressure underground drainage
SANS 50743:1994 / EN 743:1994 NUM 582
and sewerage - Polypropylene (PP)
Plastics piping and ducting systems - Thermoplastics pipes -
SANS 9080:2004 / ISO 9080:2003 NUM 394 Determination of the longitudinal reversion
Plastics piping and ducting systems - Determination of the long-
term hydrostatic strength of thermoplastics materials in pipe form
by extrapolation 23.040.40 Metal fittings
________________________________________________________
SANS 9852:1995 / ISO 9852:1995 NUM 402
SANS 14:1994 / ISO 49:1994 NUM 1
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane
resistance at specified temperature (DCMT) - Test method Malleable cast iron fittings threaded to ISO 7-1
SANS 9854-1:1994 / ISO 9854-1:1994 NUM 402 SANS 39:2006 / ISO 407:2004 NUM 5
Thermoplastics pipes for the transport of fluids - Determination of Small medical gas cylinders - Pin-index yoke-type valve
pendulum impact strength by the Charpy method Part 1: General connections
test method
SANS 546:1977 NUM 65
SANS 9854-2:1994 / ISO 9854-2:1994 NUM 403
Cast iron fittings for asbestos cement pressure pipes
Thermoplastics pipes for the transport of fluids - Determination of
pendulum impact strength by the Charpy method Part 2: Test
conditions for pipes of various materials SANS 746:1976 NUM 79
Cast-iron pipes and pipe fittings for use above ground in drainage
SANS 10112:2003 NUM 417 installations
The installation of polyethylene and poly(vinyl chloride)(PVC-U and
PVC-M) pipes SANS 1067-1:2005 NUM 106
Copper-based fittings for copper tubes Part 1: Compression fittings
SANS 10508:1995 / ISO 10508:1995 NUM 486
Thermoplastics pipes and fittings for hot and cold water systems SANS 1067-2:2005 NUM 106
Copper-based fittings for copper tubes Part 2: Capillary solder
fittings
SANS 1209:1984 NUM 126 SANS 8773:2007 / ISO 8773:2006 NUM 391
Pipe holderbats Plastics piping systems for non-pressure underground drainage
and sewerage - Polypropylene (PP)
SANS 1409:2004 NUM 153 SANS 10508:1995 / ISO 10508:1995 NUM 486
Outlet sockets and probes for medical (gas and vacuum) services Thermoplastics pipes and fittings for hot and cold water systems
used in hospitals
SANS 1223:2003 NUM 128 SANS 8207:2004 / ISO 8207:1996 NUM 383
Fibre-cement pressure pipes and couplings Gas welding equipment - Specification for hose assemblies for
equipment for welding, cutting and allied processes
SANS 1476:2006 NUM 165
SANS 12170:2004 / ISO 12170:1996 NUM 504
Fabricated flanged steel pipework
Gas welding equipment - Thermoplastic hoses for welding and
allied processes
SANS 1808-2:2005 NUM 226
Water supply and distribution system components Part 2: Metallic SANS 14557:2007 / ISO 14557:2002 NUM 523
compression type pipe couplings Fire-fighting hoses - Rubber and plastics suction hoses and hose
assemblies
SANS 1808-5:2001 NUM 226
Water supply and distribution system components Part 5: Flexible
connectors 23.040.80 Seals for pipe and hose assemblies
________________________________________________________
SANS 50712:1993 / EN 712:1993 NUM 582
SANS 564:2007 NUM 66
Thermoplastics piping systems - End-load bearing mechanical
joints between pressure pipes and fittings - Test method for Rubber insertion sheeting
resistance to pull-out under constant longitudinal force
SANS 974-1:1986 NUM 96
SANS 50713:1993 / EN 713:1993 NUM 582
Rubber joint rings (non-cellular) Part 1: Joint rings for use in water,
Plastics piping systems - Mechanical joints between fittings and sewer and drainage systems
polyolefin pressure pipes - Test method for leaktightness under
internal pressure of assemblies subjected to bending SANS 974-2:2007 NUM 96
Rubber joint rings (non-cellular) Part 2: Joint rings for use in the
dairy industry
23.040.70 Hoses and hose assemblies
________________________________________________________ SANS 1834:2005 NUM 234
SANS 252:2003 / BS 4089:1999 NUM 36 Unsintered polytetrafluoroethylene (PTFE) tapes for engineering
Metallic hose assemblies for liquid petroleum gases and liquefied applications
natural gases
SANS 50681-1:1996 / EN 681-1:1996 NUM 582
SANS 271:2005 / ISO 6224:2005 NUM 38 Elastomeric seals - Material requirements for pipe joint seals used
Thermoplastics hoses, textile-reinforced, for general-purpose water in water and drainage applications Part 1: Vulcanized rubber
applications - Specification
SANS 1808-32:2005 NUM 228 SANS 60335-2-40:2006 / IEC 60335-2-40:2005 NUM 620
Water supply and distribution system components Part 32: Float Household and similar electrical appliances - Safety Part 2-40:
valves (equilibrium type) Particular requirements for electrical heat pumps, air conditioners
and dehumidifiers
SANS 1808-37:2005 NUM 228
Water supply and distribution system components Part 37: Single- SANS 60335-2-65:2003 / IEC 60335-2-65:2002 NUM 623
control mixer taps (plastics) Household and similar electrical appliances - Safety Part 2-65:
Particular requirements for air-cleaning appliances
SANS 1808-53:2005 NUM 228
Water supply and distribution system components Part 53: Drain SANS 60335-2-80:2004 / IEC 60335-2-80:2004 NUM 626
cocks for hot-water storage containers Household and similar electrical appliances - Safety Part 2-80:
Particular requirements for fans
SANS 1808-66:2005 NUM 229
Water supply and distribution system components Part 66: SANS 60335-2-104:2003 / IEC 60335-2-104:2003 NUM 629
Demand type water taps Household and similar electrical appliances - Safety Part 2-104:
Particular requirements for appliances to recover and/or recycle
SANS 1849:2001 NUM 235 refrigerant from air conditioning and refrigeration equipment
Butterfly valves for general purposes
Bow-saw frames and blades SANS 8662-5:2003 / ISO 8662-5:1992 NUM 390
Hand-held portable power tools - Measurement of vibrations at the
SANS 61029-2-7:1993 / IEC 61029-2-7:1993 NUM 674 handle Part 5: Pavement breakers and hammers for construction
Safety of transportable motor-operated electric tools Part 2-7: work
Particular requirements for diamond saws with water supply
SANS 8662-6:2003 / ISO 8662-6:1994 NUM 390
Hand-held portable power tools - Measurement of vibrations at the
25.100.50 Taps and threading dies handle Part 6: Impact drills
________________________________________________________
SANS 8662-7:2003 / ISO 8662-7:1997 NUM 390 SANS 60745-2-6:2007 / IEC 60745-2-6:2006 NUM 645
Hand-held portable power tools - Measurement of vibrations at the Hand-held motor-operated electric tools - Safety Part 2-6:
handle Part 7: Wrenches, screwdrivers and nut runners with Particular requirements for hammers
impact, impulse or ratchet action
SANS 60745-2-7:1989 / IEC 60745-2-7:1989 NUM 645
SANS 8662-9:2003 / ISO 8662-9:1996 NUM 390 Safety of hand-held motor-operated electric tools Part 2-7:
Hand-held portable power tools - Measurement of vibrations at the Particular requirements for spray guns for non-flammable liquids
handle Part 9: Rammers
SANS 60745-2-8:2003 / IEC 60745-2-8:2003 NUM 645
SANS 8662-10:2003 / ISO 8662-10:1998 NUM 390 Hand-held motor-operated electric tools - Safety Part 2-8:
Hand-held portable power tools - Measurement of vibrations at the Particular requirements for shears and nibblers
handle Part 10: Nibblers and shears
SANS 60745-2-9:2003 / IEC 60745-2-9:2003 NUM 646
SANS 8662-11:2003 / ISO 8662-11:1999 NUM 391 Hand-held motor-operated electric tools - Safety Part 2-9:
Hand-held portable power tools - Measurement of vibrations at the Particular requirements for tappers
handle Part 11: Fastener driving tools
SANS 60745-2-11:2003 / IEC 60745-2-11:2003 NUM 646
SANS 8662-14:2003 / ISO 8662-14:1996 NUM 391 Hand-held motor-operated electric tools - Safety Part 2-11:
Hand-held portable power tools - Measurement of vibrations at the Particular requirements for reciprocating saws (jig and sabre saws)
handle Part 14: Stone-working tools and needle scalers
SANS 60745-2-12:2003 / IEC 60745-2-12:2003 NUM 646
Hand-held motor-operated electric tools - Safety Part 2-12:
25.140.10 Pneumatic tools Particular requirements for concrete vibrators
________________________________________________________
SANS 60745-2-13:2007 / IEC 60745-2-13:2006 NUM 646
SANS 8662-8:2003 / ISO 8662-8:1997 NUM 390
Hand-held motor-operated electric tools - Safety Part 2-13:
Hand-held portable power tools - Measurement of vibrations at the Particular requirements for chain saws
handle Part 8: Polishers and rotary, orbital and random orbital
sanders SANS 60745-2-14:2003 / IEC 60745-2-14:2003 NUM 646
SANS 8662-12:2003 / ISO 8662-12:1997 Hand-held motor-operated electric tools - Safety Part 2-14:
NUM 391
Particular requirements for planers
Hand-held portable power tools - Measurement of vibrations at the
handle Part 12: Saws and files with reciprocating action and saws SANS 60745-2-15:2007 / IEC 60745-2-15:2006 NUM 646
with oscillating or rotating action
Hand-held motor-operated electric tools - Safety Part 2-15:
SANS 8662-13:2003 / ISO 8662-13:1997 Particular requirements for hedge trimmers
NUM 391
Hand-held portable power tools - Measurement of vibrations at the SANS 60745-2-16:1993 / IEC 60745-2-16:1993 NUM 646
handle Part 13: Die grinders
Safety of hand-held motor-operated electric tools Part 2-16:
Particular requirements for tackers
25.140.20 Electric tools SANS 60745-2-17:2003 / IEC 60745-2-17:2003 NUM 646
________________________________________________________ Hand-held motor-operated electric tools - Safety Part 2-17:
SANS 60335-2-45:2003 / IEC 60335-2-45:2002 NUM 621 Particular requirements for routers and trimmers
Household and similar electrical appliances - Safety Part 2-45: SANS 60745-2-18:2003 / IEC 60745-2-18:2003 NUM 647
Particular requirements for portable heating tools and similar
appliances Hand-held motor-operated electric tools - Safety Part 2-18:
Particular requirements for strapping tools
SANS 60745-1:2004 / IEC 60745-1:2003 NUM 644
SANS 60745-2-19:2006 / IEC 60745-2-19:2005 NUM 647
Hand-held motor-operated electric tools - Safety Part 1: General
requirements Hand-held motor-operated electric tools - Safety Part 2-19:
Particular requirements for jointers
SANS 60745-2-1:2004 / IEC 60745-2-1:2003 NUM 645
SANS 60745-2-20:2003 / IEC 60745-2-20:2003 NUM 647
Hand-held motor-operated electric tools - Safety Part 2-1:
Particular requirements for drills and impact drills Hand-held motor-operated electric tools - Safety Part 2-20:
Particular requirements for band saws
SANS 60745-2-2:2003 / IEC 60745-2-2:2003 NUM 645
SANS 61029-1:1990 / IEC 61029-1:1990 NUM 673
Hand-held motor-operated electric tools - Safety Part 2-2:
Particular requirements for screwdrivers and impact wrenches Safety of transportable motor-operated electric tools Part 1:
General requirements
SANS 60745-2-3:2007 / IEC 60745-2-3:2006 NUM 645
SANS 61029-2-1:1993 / IEC 61029-2-1:1993 NUM 673
Hand-held motor-operated electric tools - Safety Part 2-3:
Particular requirements for grinders, polishers and disk-type Safety of transportable motor-operated electric tools Part 2-1:
sanders Particular requirements for circular saws
SANS 60745-2-4:2007 / IEC 60745-2-4:2006 NUM 645 SANS 61029-2-2:1993 / IEC 61029-2-2:1993 NUM 673
Hand-held motor-operated electric tools - Safety Part 2-4: Safety of transportable motor-operated electric tools Part 2-2:
Particular requirements for sanders and polishers other than disk Particular requirements for radial arm saws
type
SANS 61029-2-3:1993 / IEC 61029-2-3:1993 NUM 673
SANS 60745-2-5:2003 / IEC 60745-2-5:2003 NUM 645 Safety of transportable motor-operated electric tools Part 2-3:
Hand-held motor-operated electric tools - Safety Part 2-5: Particular requirements for planers and thicknessers
Particular requirements for circular saws
SANS 61029-2-4:1993 / IEC 61029-2-4:1993 NUM 674 CKS 168:1972 NUM 734
Safety of transportable motor-operated electric tools Part 2-4: Adjustable spanners
Particular requirements for bench grinders
SANS 61029-2-8:1995 / IEC 61029-2-8:1995 NUM 674 SANS 10044-2:2004 NUM 407
Safety of transportable motor-operated electric tools Part 2-8: Welding Part 2: Symbols
Particular requirements for single spindle vertical moulders
SANS 61029-2-9:1995 / IEC 61029-2-9:1995 NUM 674 SANS 10269:2002 NUM 470
Safety of transportable motor-operated electric tools Part 2: Welding of thermoplastics - Testing and approval of welders
Particular requirements for mitre saws
SANS 1210:2007 NUM 126 SANS 9013:2006 / ISO 9013:2002 NUM 393
Hexagon wrench keys Thermal cutting - Classification of thermal cuts - Geometrical
product specification and quality tolerances
SANS 1211:2007 NUM 126
SANS 9606-1:1994 / ISO 9606-1:1994 NUM 399
Adjustable wrenches
Approval testing of welders - Fusion welding Part 1: Steels
SANS 10268-2:2004 NUM 469 SANS 1071:2005 / ISO 1071:2003 NUM 106
Welding of thermoplastics - Welding processes Part 2: Welding consumables - Covered electrodes, wires, rods and
Electrofusion welding tubular cored electrodes for fusion welding of cast iron -
Classification
SANS 10268-3:2005 NUM 469
Welding of thermoplastics - Welding processes Part 3: Hot-gas SANS 1370:2007 NUM 145
welding Fluxes for the submerged arc welding of carbon and carbon
manganese steels
SANS 10268-4:2004 NUM 470
Welding of thermoplastics - Welding processes Part 4: Hot-gas SANS 1655:2004 NUM 190
extrusion welding Welding of thermoplastics - Welding rods, fillers and solvents
SANS 15614-2:2007 / ISO 15614-2:2005 SANS 5184:1979 / ISO 5184:1979 NUM 281
NUM 532
Specification and qualification of welding procedures for metallic Straight resistance spot welding electrodes
materials - Welding procedure test Part 2: Arc welding of
aluminium and its alloys SANS 5821:1979 / ISO 5821:1979 NUM 317
Resistance spot welding electrode caps
SANS 8430-1:1988 / ISO 8430-1:1988 NUM 385 SANS 9312:1990 / ISO 9312:1990 NUM 396
Resistance spot welding - Electrode holders Part 1: Taper fixing Resistance welding equipment - Insulated pins for use in electrode
1:10 back-ups
SANS 8430-2:1988 / ISO 8430-2:1988 NUM 385 SANS 9313:1989 / ISO 9313:1989 NUM 396
Resistance spot welding - Electrode holders Part 2: Morse taper Resistance spot welding equipment - Cooling tubes
fixing
SANS 8430-3:1988 / ISO 8430-3:1988 SANS 9539:1988 / ISO 9539:1988 NUM 399
NUM 385
Resistance spot welding - Electrode holders Part 3: Parallel shank Materials for equipment used in gas welding, cutting and allied
fixing for end thrust processes
SANS 5822:1988 / ISO 5822:1988 NUM 317 25.160.40 Welded joints and welds
Spot welding equipment - Taper plug gauges and taper ring gauges ________________________________________________________
SANS 547:2006 / ISO 5173:2000 NUM 65
SANS 5828:2004 / ISO 5828:2001 NUM 318
Destructive tests on welds in metallic materials - Bend tests
Resistance welding equipment - Secondary connecting cables with
terminals connected to water-cooled lugs - Dimensions and
characteristics SANS 2553:1992 / ISO 2553:1992 NUM 251
Welded, brazed and soldered joints - Symbolic representation on
SANS 7284:1993 / ISO 7284:1993 NUM 372 drawings
Resistance welding equipment - Particular specifications applicable
to transformers with two separate secondary windings for multi-spot SANS 4136:2004 / ISO 4136:2001 NUM 263
welding, as used in the automobile industry Destructive tests on welds in metallic materials - Transverse tensile
test
SANS 7286:1986 / ISO 7286:1986 NUM 372
Graphical symbols for resistance welding equipment SANS 6269:2005 NUM 358
Welding of thermoplastics - Test methods for welded joints
SANS 8167:1989 / ISO 8167:1989 NUM 382
Projections for resistance welding SANS 6520-1:2005 / ISO 6520-1:1998 NUM 366
Welding and allied processes - Classification of geometric
imperfections in metallic materials Part 1: Fusion welding
SANS 8207:2004 / ISO 8207:1996 NUM 383
Gas welding equipment - Specification for hose assemblies for SANS 6520-2:2004 / ISO 6520-2:2001 NUM 366
equipment for welding, cutting and allied processes Welding and allied processes - Classification of geometric
imperfections in metallic materials Part 2: Welding with pressure
SANS 9090:1989 / ISO 9090:1989 NUM 394
Gas tightness of equipment for gas welding and allied processes
SANS 6947:1990 / ISO 6947:1990 NUM 370 SANS 9455-6:1995 / ISO 9455-6:1995 NUM 398
Welds - Working positions - Definitions of angles of slope and Soft soldering fluxes - Test methods Part 6: Determination and
rotation detection of halide (excluding fluoride) content
SANS 9692-1:2007 / ISO 9692-1:2003 NUM 400 SANS 9455-8:1991 / ISO 9455-8:1991 NUM 398
Welding and allied processes - Recommendations for joint Soft soldering fluxes - Test methods Part 8: Determination of zinc
preparation Part 1: Manual metal-arc welding, gas-shielded metal- content
arc welding, gas welding, TIG welding and beam welding of steels
SANS 9455-9:1993 / ISO 9455-9:1993 NUM 398
SANS 10167:2004 NUM 451 Soft soldering fluxes - Test methods Part 9: Determination of
The quality evaluation of fusion welded joints in steel structures ammonia content
SANS 30:1991 / EN 10203:1991 NUM 4 SANS 2082:1986 / ISO 2082:1986 NUM 245
Cold reduced electrolytic tinplate Metallic coatings - Electroplated coatings of cadmium on iron or
steel
SANS 32:1997 / EN 10240:1997 NUM 4 SANS 2093:1986 / ISO 2093:1986 NUM 245
Internal and/or external protective coatings for steel tubes - Electroplated coatings of tin - Specification and test methods
Specification for hot dip galvanized coatings applied in automatic
plants
SANS 2177:1985 / ISO 2177:1985 NUM 246
SANS 121:2000 / ISO 1461:1999 NUM 17 Metallic coatings - Measurement of coating thickness - Coulometric
Hot dip galvanized coatings on fabricated iron and steel articles - method by anodic dissolution
Specifications and test methods
SANS 2178:1982 / ISO 2178:1982 NUM 246
SANS 135:1988 / ISO 1456:1988 NUM 18 Non-magnetic coatings on magnetic substrates - Measurement of
Metallic coatings - Electrodeposited coatings of nickel plus coating thickness - Magnetic method
chromium and of copper plus nickel plus chromium
SANS 2179:1986 / ISO 2179:1986 NUM 246
SANS 136:1988 / ISO 1458:1988 NUM 19 Electroplated coatings of tin-nickel alloy - Specification and test
Metallic coatings - Electrodeposited coatings of nickel methods
Electrodeposited coatings of silver and silver alloys for decorative SANS 4519:1980 / ISO 4519:1980 NUM 267
and protective purposes
Electrodeposited metallic coatings and related finishes - Sampling
SANS 1627:2007 NUM 187 procedures for inspection by attributes
Electrodeposited coatings of gold and gold alloys for decorative SANS 4521:1985 / ISO 4521:1985 NUM 267
and protective purposes
Metallic coatings - Electrodeposited silver and silver alloy coatings
SANS 1700-5-11:2003 / ISO 4042:1999 NUM 199 for engineering purposes
Fasteners Part 5: General requirements and mechanical properties SANS 4522-2:1985 / ISO 4522-2:1985 NUM 267
Section 11: Electroplated coatings
Metallic coatings - Test methods for electrodeposited silver and
SANS 1700-5-16:2003 / ISO 10666:1999 NUM 200 silver alloy coatings Part 2: Adhesion tests
Fasteners: Part 5: General requirements and mechanhical SANS 4522-3:1988 / ISO 4522-3:1988 NUM 267
properties Section 16: Drilling screws with tapping screw thread -
Metallic coatings - Test methods for electrodeposited silver and
Mechanical and functional properties
silver alloy coatings Part 3: Determination of the presence of
SANS 1700-5-18:2003 / ISO 10683:2000 NUM 200 residual salts
Fasteners Part 5: General requirements and mechanical properties SANS 4523:1985 / ISO 4523:1985 NUM 268
Section 18: Fasteners - Non-electrolytically applied zinc flake
Metallic coatings - Electrodeposited gold and gold alloy coatings for
coatings
engineering purposes
SANS 2063:1991 / ISO 2063:1991 NUM 244
SANS 4524-1:1985 / ISO 4524-1:1985 NUM 268
Metallic and other inorganic coatings - Thermal spraying - Zinc,
Metallic coatings - Test methods for electrodeposited gold and gold
aluminium and their alloys
alloy coatings Part 1: Determination of coating thickness
SANS 2081:1986 / ISO 2081:1986 NUM 245
SANS 4524-2:2007 / ISO 4524-2:2000 NUM 268
Metallic coatings - Electroplated coatings of zinc on iron or steel
Metallic coatings - Test methods for electrodeposited gold and gold
alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests
SANS 4524-3:1985 / ISO 4524-3:1985 NUM 268 SANS 14713:1999 / ISO 14713:1999 NUM 524
Metallic coatings - Test methods for electrodeposited gold and gold Protection against corrosion of iron and steel in structures - Zinc
alloy coatings Part 3: Electrographic tests for porosity and aluminium coatings - Guidelines
SANS 4524-5:1985 / ISO 4524-5:1985 NUM 268 SANS 53811:2006 / EN 13811:2003 NUM 592
Metallic coatings - Test methods for electrodeposited gold and gold Sherardizing - Zinc diffusion coatings on ferrous products -
alloy coatings Part 5: Adhesion tests Specification
SANS 4524-6:1988 / ISO 4524-6:1988 NUM 268 PIESA 1102:2004 NUM 767
Metallic coatings - Test methods for electrodeposited gold and gold Corrosion protection of new mild steel fabricated equipment
alloy coatings Part 6: Determination of the presence of residual
salts
VC 8042:1950 NUM 770
SANS 4525:2007 / ISO 4525:2003 NUM 269 Articles marked E.P.N.S.
Metallic coatings - Electroplated coatings of nickel plus chromium
on plastics materials
25.220.50 Enamels
SANS 4526:2007 / ISO 4526:2004 NUM 269
________________________________________________________
Metallic coatings - Electroplated coatings of nickel for engineering
purposes SANS 2178:1982 / ISO 2178:1982 NUM 246
Non-magnetic coatings on magnetic substrates - Measurement of
SANS 4538:1978 / ISO 4538:1978 NUM 269 coating thickness - Magnetic method
Metallic coatings - Thioacetamide corrosion test (TAA test)
SANS 1142:1979 NUM 114 SANS 5151:1994 / ISO 5151:1994 NUM 280
Diesel engines modified for use in hazardous locations (other than Non-ducted air conditioners and heat pumps - Testing and rating
in mines) for performance
SANS 10219-1:2006 NUM 460 SANS 60335-2-40:2006 / IEC 60335-2-40:2005 NUM 620
The determination of performance (at net power) of industrial Household and similar electrical appliances - Safety Part 2-40:
internal combustion engines Part 1: Standard reference conditions Particular requirements for electrical heat pumps, air conditioners
and declarations of power, fuel consumption and lubricating oil and dehumidifiers
consumption
27.190 Biological sources and alternative SANS 60204-1:2006 / IEC 60204-1:2005 NUM 608
sources of energy Safety of machinery - Electrical equipment of machines Part 1:
________________________________________________________ General requirements
ARP 062-1:2005 / IEC/TS 62257-1:2003 NUM 722 SANS 60204-11:2000 / IEC 60204-11:2000 NUM 608
Recommendations for small renewable energy and hybrid systems Safety of machinery - Electrical equipment of machines Part 11:
for rural electrification Part 1: General introduction to rural Requirements for HV equipment for voltages above 1 000 V a.c or
electrification 1 500 V d.c and not exceeding 36 kV
ARP 062-2:2005 / IEC/TS 62257-2:2004 NUM 722 SANS 60335-2-71:2007 / IEC 60335-2-71:2007 NUM 624
Recommendations for small renewable energy and hybrid systems Household and similar electrical appliances - Safety Part 2-71:
for rural electrification Part 2: From requirements to a range of Particular requirements for electrical heating appliances for
electrification systems breeding and rearing animals
ARP 062-3:2006 / IEC/TS 62257-3:2004 NUM 723 SANS 60529:2001 / IEC 60529:2001 NUM 634
Recommendations for small renewable energy and hybrid systems Degrees of protection provided by enclosures (IP Code)
for rural electrification Part 3: Project development and
management
SANS 60695-11-10:2004 / IEC 60695-11-10:2003 NUM 641
ARP 062-5:2006 / IEC/TS 62257-5:2005 NUM 723 Fire hazard testing Part 11-10: Test flames - 50 W horizontal and
Recommendations for small renewable energy and hybrid systems vertical flame test methods
for rural electrification Part 5: Protection against electrical hazards
SANS 60745-2-13:2007 / IEC 60745-2-13:2006 NUM 646
ARP 062-6:2006 / IEC/TS 62257-6:2005 NUM 723 Hand-held motor-operated electric tools - Safety Part 2-13:
Recommendations for small renewable energy and hybrid systems Particular requirements for chain saws
for rural electrification Part 6: Acceptance, operation, maintenance
and replacement SANS 60745-2-14:2003 / IEC 60745-2-14:2003 NUM 646
Hand-held motor-operated electric tools - Safety Part 2-14:
Particular requirements for planers
27.200 Refrigerating technology
________________________________________________________ SANS 61000-1-1:1992 / IEC 61000-1-1:1992 NUM 665
Electromagnetic compatibility (EMC) Part 1: General Section 1:
SANS 10132:1983 NUM 445 Application and interpretation of fundamental definitions and terms
The installation and operation of refrigerated milk tanks
SANS 61000-4-1:2007 / IEC 61000-4-1:2006 NUM 668
SANS 10147:2002 NUM 448 Electromagnetic compatibility (EMC) Part 4-1: Testing and
measurement techniques - Overview of IEC 61000-4 series
Refrigerating systems including plants associated with air-
conditioning systems SANS 62262:2004 / IEC 62262:2002 NUM 702
Degrees of protection provided by enclosures for electrical
equipment against external mechanical impacts (IK code)
27.220 Heat recovery. Thermal insulation
________________________________________________________ SANS 62310-1:2005 / IEC 62310-1:2005 NUM 705
SANS 612:2007 / BS 5970:2001 NUM 70 Static transfer systems (STS) Part 1: General and safety
Code of practice for thermal insulation of pipework and equipment requirements
in the temperature range of -100 °C to +870 °C
NRS 040-1:1999 NUM 759
SANS 1445-2:1990 NUM 160 High-voltage operating regulations Part 1: Definitions - Preferred
Thermal insulation materials for industrial applications Part 2: definitions for systems, equipment and conditions relating to the
Metal-mesh-faced mineral fibre mattresses generation, transmission and distribution of electricity
SANS 60811-1-3:2001 / IEC 60811-1-3:2001 NUM 654 SANS 6284-5:2007 NUM 361
Common test methods for insulating and sheathing materials of Test methods for cross-linked polyethylene (XLPE) insulated
electric and optical cables Part 1-3: General application - Methods electric cables Part 5: Ageing tests
for determining the density - Water absorption tests - Shrinkage
test SANS 6286:2007 NUM 361
Test methods for sheathing of insulated electric cables
SANS 60811-1-4:1985 / IEC 60811-1-4:1985 NUM 654
Common test methods for insulating and sheathing materials of
SANS 60811-2-1:2003 / IEC 60811-2-1:2001 NUM 654
electric and optical cables Part 1-4: Methods for general application
- Test at low temperature Common test methods for insulating and sheathing materials of
electric and optical cables Part 2-1: Methods specific to elastomeric
SANS 60811-3-1:1985 / IEC 60811-3-1:1985 NUM 654 compounds - Ozone resistance, hot set and mineral oil immersion
Common test methods for insulating and sheathing materials of tests
electric and optical cables Part 3-1: Methods specific to PVC
SANS 60811-4-1:2004 / IEC 60811-4-1:2004 NUM 654
compounds - Pressure test at high temperature - Tests for
resistance to cracking Insulating and sheathing materials of electric and optical cables -
Common test methods Part 4-1: Methods specific to polyethylene
SANS 60811-3-2:1985 / IEC 60811-3-2:1985 NUM 654 and polypropylene compounds - Resistance to environmental
Common test methods for insulating and sheathing materials of stress cracking - Measurement of the melt flow index - Carbon
electric cables Part 3-2: Methods specific to PVC compounds - black and/or mineral filler content measurement in polyethylene by
Loss of mass test - Thermal stability test direct combustion - Measurement of carbon black content by
thermogravimetric analysis (TGA) - Assessment of carbon black
dispersion in polyethylene using a microscope
29.035.10 Paper and board insulating materials SANS 60811-4-2:2004 / IEC 60811-4-2:2004 NUM 655
________________________________________________________
Insulating and sheathing materials of electric and optical cables -
SANS 6281-1:2007 NUM 359 Common test methods Part 4-2: Methods specific to polyethylene
and polypropylene compounds - Tensile strength and elongation at
Test methods for impregnated paper-insulated electric cables Part
break after conditioning at elevated temperature - Wrapping test
1: Tests on insulating and semi-conducting paper
after conditioning at elevated temperature - Wrapping test after
thermal ageing in air - Measurement of mass increase - Long-term
stability test - Test method for copper-catalyzed oxidative
29.035.20 Plastics and rubber insulating degradation
materials
________________________________________________________
SANS 122:2007 NUM 17
29.035.99 Other insulating materials
________________________________________________________
Pressure-sensitive adhesive tapes for electrical purposes (Metric
units) SANS 1411-5:2003 NUM 154
Materials of insulated electric cables and flexible cords Part 5:
SANS 1411-2:2006 NUM 153 Halogen-free, flame-retardant materials
Materials of insulated electric cables and flexible cords Part 2:
Polyvinyl chloride (PVC) SANS 1411-6:2001 NUM 154
Materials of insulated electric cables and flexible cords Part 6:
SANS 1411-3:2006 NUM 154 Armour
Materials of insulated electric cables and flexible cords Part 3:
Elastomers
29.040.10 Insulating oils
SANS 1411-4:2001 NUM 154 ________________________________________________________
Materials of insulated electric cables and flexible cords Part 4:
Cross-linked polyethylene (XLPE) SANS 555:2002 / BS 148:1998 NUM 66
Unused and reclaimed mineral insulating oils for transformers and
SANS 1411-7:2003 NUM 154 switchgear
Materials of insulated electric cables and flexible cords Part 7:
Polyethylene (PE) NRS 079-1:2004 NUM 764
Mineral insulating oils (uninhibited) Part 1: Purchase, management,
SANS 5506:2007 NUM 298 maintenance and testing
Tear resistance of rubber cable sheathing
NRS 028:1993 NUM 757 SANS 60851-2:2004 / IEC 60851-2:1997 NUM 656
Cable lugs and ferrules for copper and aluminium conductors Winding wires - Test methods Part 2: Determination of dimensions
NRS 051:1999 NUM 761 SANS 60851-3:2004 / IEC 60851-3:1997 NUM 656
Suspension and strain fittings for insulated neutral supporting Winding wires - Test methods Part 3: Mechanical properties
conductors used in medium-voltage aerial bundled conductor
systems
SANS 60851-4:2006 / IEC 60851-4:2005 NUM 656
NRS 059:2002 NUM 762 Winding wires - Test methods Part 4: Chemical properties
Recommendations to minimize problems associated with the theft
of transformer neutral and neutral earthing copper conductors SANS 60851-5:2004 / IEC 60851-5:2004 NUM 656
Winding wires - Test methods Part 5: Electrical properties
SANS 6282-1:2007 NUM 360 SANS 60331-31:2003 / IEC 60331-31:2002 NUM 614
Test methods for bare conductors and conductors of insulated Test for electric cables under fire conditions - Circuit integrity Part
electric cables Part 1: Conductor resistance 31: Procedures and requirements for fire with shock - Cables of
rated voltage up to and including 0,6/1 kV
SANS 6282-2:2007 NUM 360
Test methods for bare conductors and conductors of insulated SANS 60332-1-1:2005 / IEC 60332-1-1:2004 NUM 614
electric cables Part 2: Quality of metallic coatings Tests on electric and optical fibre cables under fire conditions Part
1-1: Test for vertical flame propagation for a single insulated wire or
SANS 6283:2007 NUM 360 cable - Apparatus
Test methods for armouring of insulated electric cables
SANS 60332-1-2:2005 / IEC 60332-1-2:2004 NUM 614
Tests on electric and optical fibre cables under fire conditions Part
SANS 6284-1:2007 NUM 360
1-2: Test for vertical flame propagation for a single insulated wire or
Test methods for cross-linked polyethylene (XLPE) insulated cable - Procedure for 1 kW pre-mixed flame
electric cables Part 1: Tests on XLPE insulation
SANS 60332-1-3:2005 / IEC 60332-1-3:2004 NUM 614
SANS 6284-2:2007 NUM 360
Tests on electric and optical fibre cables under fire conditions Part
Test methods for cross-linked polyethylene (XLPE) insulated 1-3: Test for vertical flame propagation for a single insulated wire or
electric cables Part 2: Tests on extruded semi-conducting screens cable - Procedure for determination of flaming droplets/particles
SANS 6284-3:2007 NUM 360 SANS 60332-2-1:2005 / IEC 60332-2-1:2004 NUM 614
Test methods for cross-linked polyethylene (XLPE) insulated Tests on electric and optical fibre cables under fire conditions Part
electric cables Part 3: Tests on finished cable 2-1: Test for vertical flame propagation for a single small insulated
wire or cable - Apparatus
SANS 6284-4:2007 NUM 361
Test methods for cross-linked polyethylene (XLPE) insulated SANS 60332-2-2:2005 / IEC 60332-2-2:2004 NUM 614
electric cables Part 4: Tests after installation Tests on electric and optical fibre cables under fire conditions Part
2-2: Test for vertical flame propagation for a single small insulated
SANS 6284-5:2007 NUM 361 wire or cable - Procedure for diffusion flame
Test methods for cross-linked polyethylene (XLPE) insulated
electric cables Part 5: Ageing tests SANS 60332-3-10:2000 / IEC 60332-3-10:2000 NUM 615
Tests on electric cables under fire conditions Part 3-10: Test for
SANS 6286:2007 NUM 361 vertical flame spread of vertically-mounted bunched wires or cables
Test methods for sheathing of insulated electric cables - Apparatus
SANS 60754-2:1991 / IEC 60754-2:1991 NUM 647 SANS 60840:2006 / IEC 60840:2004 NUM 656
Test on gases evolved during combustion of materials from cables Power cables with extruded insulation and their accessories for
Part 2: Determination of degree of acidity of gases by measuring rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170
pH and conductivity kV) - Test methods and requirements
SANS 60799:2007 / IEC 60799:1998 NUM 653 SANS 61034-1:2006 / IEC 61034-1:2005 NUM 675
Electrical accessories - Cord sets and interconnection cord sets Measurement of smoke density of cables burning under defined
conditions Part 1: Test apparatus
SANS 60811-1-1:2001 / IEC 60811-1-1:2001 NUM 653 SANS 61034-2:2006 / IEC 61034-2:2005 NUM 675
Common test methods for insulating and sheathing materials of Measurement of smoke density of cables burning under defined
electric cables and optical cables Part 1-1: Methods for general conditions Part 2: Test procedure and requirements
application - Measurement of thickness and overall dimensions -
Tests for determining the mechanical properties SANS 61442:2006 / IEC 61442:2005 NUM 689
SANS 60811-1-2:1985 / IEC 60811-1-2:1985 NUM 653 Test methods for accessories for power cables with rated voltages
from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
Common test methods for insulating and sheathing materials of
electric and optical cables Part 1: Methods for general application SANS 61515:1995 / IEC 61515:1995 NUM 689
Section 2: Thermal ageing methods
Mineral insulated thermocouple cables and thermocouples
SANS 60811-1-3:2001 / IEC 60811-1-3:2001 NUM 654
Common test methods for insulating and sheathing materials of SANS 62230:2007 / IEC 62230:2006 NUM 702
electric and optical cables Part 1-3: General application - Methods Electric cables - Spark-test method
for determining the density - Water absorption tests - Shrinkage
test
NRS 011:2001 NUM 755
SANS 60811-1-4:1985 / IEC 60811-1-4:1985 NUM 654 Pilot cables
Common test methods for insulating and sheathing materials of
electric and optical cables Part 1-4: Methods for general application NRS 012:2002 NUM 755
- Test at low temperature
Cable terminations and live conductors within air-insulated
SANS 60811-2-1:2003 / IEC 60811-2-1:2001 NUM 654 enclosures (insulation co-ordination) for rated a.c. voltages of 7,2
kV and up to and including 36 kV
Common test methods for insulating and sheathing materials of
electric and optical cables Part 2-1: Methods specific to elastomeric NRS 013:2007 NUM 756
compounds - Ozone resistance, hot set and mineral oil immersion
tests Medium-voltage cables
SANS 60811-3-1:1985 / IEC 60811-3-1:1985 NUM 654 NRS 028:1993 NUM 757
Common test methods for insulating and sheathing materials of Cable lugs and ferrules for copper and aluminium conductors
electric and optical cables Part 3-1: Methods specific to PVC
compounds - Pressure test at high temperature - Tests for
resistance to cracking NRS 068:2002 NUM 763
Electricity distribution - Cable earth fault indicator
SANS 60811-3-2:1985 / IEC 60811-3-2:1985 NUM 654
Common test methods for insulating and sheathing materials of NRS 074-1:2005 NUM 764
electric cables Part 3-2: Methods specific to PVC compounds -
Loss of mass test - Thermal stability test Low-voltage (600/1 000 V) cable systems for underground
electrical distribution Part 1: Cables
SANS 60811-4-1:2004 / IEC 60811-4-1:2004 NUM 654
NRS 077:2005 NUM 764
Insulating and sheathing materials of electric and optical cables -
Common test methods Part 4-1: Methods specific to polyethylene XLPE-insulated cables and accessories for systems with nominal
and polypropylene compounds - Resistance to environmental voltages of 44 kV, 66 kV, 88 kV and 132 kV
stress cracking - Measurement of the melt flow index - Carbon
black and/or mineral filler content measurement in polyethylene by PIESA 1004-1:2004 NUM 765
direct combustion - Measurement of carbon black content by Low voltage (600/1 000 V) cable systems for overhead electrical
thermogravimetric analysis (TGA) - Assessment of carbon black distribution Part 1: Cables
dispersion in polyethylene using a microscope
PIESA 1004-2:2004 NUM 765
SANS 60811-4-2:2004 / IEC 60811-4-2:2004 NUM 655 Low voltage (600/1 000 V) cable systems for overhead electrical
Insulating and sheathing materials of electric and optical cables - distribution Part 2: Accessories
Common test methods Part 4-2: Methods specific to polyethylene
and polypropylene compounds - Tensile strength and elongation at PIESA 1004-3:2005 NUM 765
break after conditioning at elevated temperature - Wrapping test Low voltage (600/1 000 V) cable systems for overhead electrical
after conditioning at elevated temperature - Wrapping test after distribution Part 3: Application guide
thermal ageing in air - Measurement of mass increase - Long-term
stability test - Test method for copper-catalyzed oxidative PIESA 1012:2004 NUM 766
degradation
Cable terminations and live conductors within air-insulated
SANS 60811-5-1:2004 / IEC 60811-5-1:2004 enclosures (insulation co-ordination) for rated a.c. voltages of 7,2
NUM 655
kV and up to and including 36 kV
Insulating and sheathing materials of electric and optical cables -
Common test methods Part 5-1: Methods specific to filling PIESA 1063:2005 NUM 767
compounds - Drop-point - Separation of oil - Lower temperature
Split-concentric single-phase aerial service cable - for domestic
brittleness - Total acid number - Absence of corrosive components
service connections with separate neutral and earth conductors
- Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C
SANS 60034-18-33:1995 / IEC 60034-18-33:1995 NUM 596 SANS 61462:2007 / IEC 61462:2007 NUM 689
Rotating electrical machines Part 18: Functional evaluation of Composite hollow insulators - Pressurized and unpressurized
insulation systems Section 33: Test procedures for form-wound insulators for use in electrical equipment with rated voltage greater
windings - Multifactor functional evaluation - Endurance under than 1 000 V - Definitions, test methods, acceptance criteria and
combined thermal and electrical stresses of insulation systems design recommendations
used in machines up to and including 50 MVA and 15 kV
SANS 61466-1:1997 / IEC 61466-1:1997 NUM 689
Composite string insulator units for overhead lines with a nominal
29.080.10 Insulators voltage greater than 1 000 V Part 1: Standard strength classes and
end fittings
________________________________________________________
SANS 1371:2002 NUM 145 SANS 61467:1997 / IEC 61467:1997 NUM 689
Ceramic hollow insulators for standard transformer bushings Insulators for overhead lines with a nominal voltage above 1 000 V
- AC power arc tests on insulator sets
SANS 7931:1985 / ISO 7931:1985 NUM 380 SANS 61952:2003 / IEC 61952:2002 NUM 696
Insulation caps and bushes for resistance welding equipment Insulators for overhead lines - Composite line post insulators for
alternative current with a nominal voltage > 1 000 V
SANS 60120:1984 / IEC 60120:1984 NUM 607
SANS 62073:2006 / IEC TS 62073:2003 NUM 700
Dimensions of ball and socket couplings of string insulator units
Guidance on the measurement of wettability of insulator surfaces
SANS 62217:2006 / IEC 62217:2005 NUM 701 29.120.01 Electrical accessories in general
Polymeric insulators for indoor and outdoor use with a nominal ________________________________________________________
voltage >1000 V - General definitions, test methods and SANS 60335-2-95:2006 / IEC 60335-2-95:2005 NUM 628
acceptance criteria
Household and similar electrical appliances - Safety Part 2-95:
SANS 62231:2006 / IEC 62231:2006 NUM 702 Particular requirements for drives for vertically moving garage
doors for residential use
Composite station post insulators for substations with a.c. voltages
greater than 1000 V up to 245 kV - Definitions, test methods and SANS 60335-2-97:2006 / IEC 60335-2-97:2005 NUM 628
acceptance criteria
Household and similar electrical appliances - Safety Part 2-97:
NRS 066:2002 NUM 763 Particular requirements for drives for rolling shutters, awnings,
blinds and similar equipment
Medium-voltage insulators
NRS 009-8:2005 NUM 755
Electricity sales sytems Part 8: The management of secure
29.080.20 Bushings modules
________________________________________________________
SANS 1037:2001 NUM 102 29.120.10 Conduits for electrical purposes
Standard transformer bushings ________________________________________________________
SANS 950:2007 NUM 93
SANS 1371:2002 NUM 145
Unplasticized polyvinyl chloride rigid conduit and fittings for use in
Ceramic hollow insulators for standard transformer bushings electrical installations
SANS 60137:2004 / IEC 60137:2003 NUM 607 SANS 1200 LC:1981 NUM 124
Insulated bushings for alternating voltages above 1 000 V Standardized specification for civil engineering construction Section
LC: Cable ducts
29.100.01 Components for electrical equipment SANS 10120-3 LC:1981 NUM 432
in general Code of practice for use with standardized specifications for civil
________________________________________________________ engineering construction and contract documents Part 3: Guidance
for design Section LC: Cable ducts
SANS 1020:2003 NUM 100
Power-operated dispensing devices for flammable liquid fuels SANS 10120-4 LC:1981 NUM 437
Code of practice for use with standardized specifications for civil
NRS 075:2004 NUM 764 engineering construction and contract documents Part 4: Typical
schedule of quantities Section LC: Cable ducts
Mechanical torque shear connectors
SANS 10120-5 LC:1981 NUM 443
Code of practice for use with standardized specifications for civil
29.100.20 Electrical and electromechanical engineering construction and contract documents Part 5: Contract
components administration Section LC: Cable ducts
________________________________________________________ SANS 60423:1993 / IEC 60423:1993
NUM 631
SANS 1213:2002 NUM 127 Conduits for electrical purposes - Outside diameters of conduits for
Mechanical cable glands electrical installations and threads for conduits and fittings
SANS 60614-2-3:1990 / IEC 60614-2-3:1990 NUM 638 SANS 61386-1:1996 / IEC 61386-1:1996 NUM 688
Specification for conduits for electrical installations Part 2: Conduit systems for electrical installations Part 1: General
Particular specifications for conduits Section 3: Pliable conduits of requirements
insulating material
SANS 61386-21:2003 / IEC 61386-21:2002 NUM 688
SANS 60614-2-4:1985 / IEC 60614-2-4:1985 NUM 638 Conduit systems for cable management Part 21: Particular
Specification for conduits for electrical installations Part 2: requirements - Rigid conduit systems
Particular specifications for conduits Section 4: Pliable self-
recovering conduits of insulating materials SANS 61386-22:2003 / IEC 61386-22:2002 NUM 688
Conduit systems for cable management Part 22: Particular
SANS 60614-2-5:1992 / IEC 60614-2-5:1992 NUM 639 requirements - Pliable conduit systems
Specification for conduits for electrical installations Part 2:
Particular specifications for conduits Section 5: Flexible conduits SANS 61386-23:2003 / IEC 61386-23:2002 NUM 688
Conduit systems for cable management Part 23: Particular
SANS 60614-2-6:1992 / IEC 60614-2-6:1992 NUM 639 requirements - Flexible conduit systems
Specification for conduits for electrical installations Part 2:
Particular specifications for conduits Section 6: Pliable conduits of SANS 61386-24:2005 / IEC 61386-24:2004 NUM 688
metal or composite materials Conduit systems for cable management Part 24: Particular
requirements - Conduit systems buried underground
SANS 60614-2-7:1995 / IEC 60614-2-7:1995 NUM 639
Conduits for electrical installations - Specification Part 2: Particular
specifications for conduits Section 7: Rigid non-threadable conduits 29.120.20 Connecting devices
of aluminium alloy ________________________________________________________
SANS 60670-1:2003 / IEC 60670-1:2002 NUM 640 SANS 808:1967 NUM 83
Boxes and enclosures for electrical accessories for household and Cable glands for use on flameproof enclosures (Ex d)
similar fixed electrical installations Part 1: General requirements
SANS 60670-23:2006 / IEC 60670-23:2006 NUM 641 SANS 1433-1:1987 NUM 157
Boxes and enclosures for electrical accessories for household and Electrical terminals and connectors Part 1: Terminal blocks having
similar fixed electrical installations Part 23: Particular requirements screw and screwless terminals
for floor boxes and enclosures
SANS 1433-2:1987 NUM 157
SANS 60670-24:2006 / IEC 60670-24:2005 NUM 641 Electrical terminals and connectors Part 2: Flat push-on connectors
Boxes and enclosures for electrical accessories for household and
similar fixed electrical installations Part 24: Particular requirements SANS 60998-1:2006 / IEC 60998-1:2002 NUM 664
for enclosures for housing protective devices and similar power
Connecting devices for low-voltage circuits for household and
consuming devices
similar purposes Part 1: General requirements
SANS 61035-1:1990 / IEC 61035-1:1990 NUM 675
SANS 60998-2-1:2006 / IEC 60998-2-1:2002 NUM 664
Specification for conduit fittings for electrical installations Part 1:
Connecting devices for low-voltage circuits for household and
General requirements
similar purposes Part 2-1: Particular requirements for connecting
SANS 61035-2-3:1993 / IEC 61035-2-3:1993 devices as separate entities with screw-type clamping units
NUM 675
Specification for conduit fittings for electrical installations Part 2: SANS 60998-2-2:2006 / IEC 60998-2-2:2002 NUM 665
Particular specifications Section 3: Fittings for flexible conduits of
Connecting devices for low-voltage circuits for household and
metal, insulating or composite materials and for pliable conduits of
similar purposes Part 2-2: Particular requirements for connecting
metal or composite materials
devices as separate entities with screwless-type clamping units
SANS 61035-2-4:1995 / IEC 61035-2-4:1995 NUM 675
SANS 60998-2-3:2006 / IEC 60998-2-3:2002 NUM 665
Specification for conduit fittings for electrical installations Part 2:
Connecting devices for low-voltage circuits for household and
Particular specifications Section 4: Conduit fittings of aluminium
similar purposes Part 2-3: Particular requirements for connecting
alloy
devices as separate entities with insulation-piercing clamping units
SANS 61084-1:1991 / IEC 61084-1:1991 NUM 677
SANS 60998-2-4:2006 / IEC 60998-2-4:2004 NUM 665
Cable trunking and ducting systems for electrical installations Part
Connecting devices for low-voltage circuits for household and
1: General requirements
similar purposes Part 2-4: Particular requirements for twist-on
SANS 61084-2-1:1996 / IEC 61084-2-1:1996 connecting devices
NUM 677
Cable trunking and ducting systems for electrical installations Part SANS 61035-2-1:1993 / IEC 61035-2-1:1993 NUM 675
2: Particular requirements Section 1: Cable trunking and ducting
Specification for conduit fittings for electrical installations Part 2:
systems intended for mounting on walls or ceilings
Particular specifications Section 1: Metal conduit fittings
SANS 61084-2-2:2003 / IEC 61084-2-2:2003 NUM 678
SANS 61238-1:2003 / IEC 61238-1:2003 NUM 680
Cable trunking and ducting systems for electrical installations Part
Compression and mechanical connectors for power cables for
2-2: Particular requirements - Cable trunking systems and cable
rated voltages up to 30 kV (Um = 36 kV) Part 1: Test methods and
ducting systems intended for underfloor and flushfloor installations
requirements
SANS 61084-2-4:1996 / IEC 61084-2-4:1996 NUM 678
NRS 018-2:1995 NUM 756
Cable trunking and ducting systems for electrical installations Part
Fittings and connectors for low-voltage overhead power lines using
2: Particular requirements Section 4: Service poles
aerial bundled conductors Part 2: Strain and suspension fittings for
insulated neutral supporting conductors
SANS 60884-2-6:1997 / IEC 60884-2-6:1997 NUM 659 SANS 61058-2-4:2004 / IEC 61058-2-4:2003 NUM 677
Plugs and socket-outlets for household and similar purposes Part Switches for appliances Part 2-4: Particular requirements for
2: Particular requirements for switched socket-outlets with interlock independently mounted switches
for fixed electrical installations
SANS 61058-2-5:1994 / IEC 61058-2-5:1994 NUM 677
SANS 60906-3:1994 / IEC 60906-3:1994 NUM 660 Switches for appliances Part 2-5: Particular requirements for
IEC system of plugs and socket-outlets for household and similar change-over selectors
purposes Part 3: SELV plugs and socket-outlets, 16 A 6 V, 12 V,
24 V, 48 V, a.c and d.c NRS 031:1998 NUM 757
Alternating current disconnectors and earthing switches (above 1
VC 8008:1998 NUM 767 000 V)
Plugs, socket-outlets and socket-outlet adaptors
NRS 046:2002 NUM 760
VC 8012:1998 NUM 768 Electricity distribution - Load-break switch-disconnectors - Pole-
mounted type for rated A.C. voltages above 1 kV and up to and
Appliance couplers including 36 kV
SANS 60269-4:2007 / IEC 60269-4:2006 NUM 610 SANS 60670-21:2005 / IEC 60670-21:2004 NUM 640
Low-voltage fuses Part 4: Supplementary requirements for fuse- Boxes and enclosures for electrical accessories for household and
links for the protection of semiconductor devices similar fixed electrical installations Part 21: Particular requirements
for boxes and enclosures with provision for suspension means
SANS 60282-1:2006 / IEC 60282-1:2005 NUM 611
High-voltage fuses Part 1: Current-limiting fuses SANS 60947-5-3:2005 / IEC 60947-5-3:2005 NUM 662
Low-voltage switchgear and controlgear Part 5-3: Control circuit
devices and switching elements - Requirements for proximity
SANS 60282-2:2004 / IEC 60282-2:1997 NUM 611
devices with defined behaviour under fault conditions (PDF)
High-voltage fuses Part 2: Expulsion fuses
SANS 60947-5-5:2005 / IEC 60947-5-5:2005 NUM 662
SANS 60934:2007 / IEC 60934:2007 NUM 660 Low-voltage switchgear and controlgear Part 5-5: Control circuit
Circuit-breakers for equipment (CBE) devices and switching elements - Electrical emergency stop device
with mechanical latching function
SANS 61008-1:2006 / IEC 61008-1:2006 NUM 672 SANS 61035-2-2:1993 / IEC 61035-2-2:1993 NUM 675
Residual current operated circuit-breakers without integral Specification for conduit fittings for electrical installations Part 2:
overcurrent protection for household and similar uses (RCCBs) Particular specifications Section 2: Conduit fittings of insulating
Part 1: General rules material
SANS 61643-21:2004 / IEC 61643-21:2000 NUM 693 SANS 61534-1:2007 / IEC 61534-1:2003 NUM 690
Low voltage surge protective devices Part 21: Surge protective Powertrack systems Part 1: General requirements
devices connected to telecommunications and signalling networks -
Performance requirements and testing methods
SANS 61643-22:2005 / IEC 61643-22:2004 NUM 693 29.130.01 Switchgear and controlgear in
Low-voltage surge protective devices Part 22: Surge protective general
devices connected to telecommunications and signalling networks - ________________________________________________________
Selection and application principles
SANS 60050-441:1984 / IEC 60050(441):1984 NUM 598
SANS 61643-311:2004 / IEC 61643-311:2001 NUM 693 International electrotechnical vocabulary Chapter 441: Switchgear,
Components for low-voltage surge protective devices Part 311: controlgear and fuses
Specification for gas discharge tubes (GDT)
SANS 61117:2006 / IEC 61117:1992 NUM 678
SANS 61643-321:2004 / IEC 61643-321:2001 NUM 693 A method for assessing the short-circuit withstand strength of
Components for low-voltage surge protective devices Part 321: partially type-tested assemblies (PTTA)
Specification for avalanche breakdown diode (ABD)
SANS 62271-101:2007 / IEC 62271-101:2006 NUM 703 PIESA 1009:2005 NUM 766
High-voltage switchgear and controlgear Part 101: Synthetic testing Switchgear - Metal-enclosed ring main units for rated A.C. voltages
above 1 kV and up to and including 24 kV
SANS 62271-102:2003 / IEC 62271-102:2001 NUM 703 PIESA 1010:2005 NUM 766
High-voltage switchgear and controlgear Part 102: Alternating Metal-clad switchgear for rated A.C. voltages above 1 kV and up to
current disconnectors and earthing switches and including 36 kV - General requirements and methods of test
SANS 62271-105:2003 / IEC 62271-105:2002 NUM 703
High-voltage switchgear and controlgear Part 105: Alternating 29.130.20 Low voltage switchgear and
current switch-fuse combinations
controlgear
SANS 62271-107:2006 / IEC 62271-107:2005 NUM 703 ________________________________________________________
High-voltage switchgear and controlgear Part 107: Alternating SANS 556-1:2004 NUM 66
current fused circuit-switchers for rated voltages above 1 kV up to
Low-voltage switchgear Part 1: Circuit-breakers
and including 52 kV
SANS 62271-109:2007 / IEC 62271-109:2006 NUM 703 SANS 1473-1:2003 NUM 165
High-voltage switchgear and controlgear Part 109: Alternating- Low-voltage switchgear and controlgear assemblies Part 1: Type-
current series capacitor by-pass switches tested, partially type-tested and specially tested assemblies with a
rated short-circuit withstand strength above l0 kA
SANS 62271-110:2006 / IEC 62271-110:2005 NUM 703
High-voltage switchgear and controlgear Part 110: Inductive load SANS 60439-1:2004 / IEC 60439-1:2004 NUM 632
switching Low-voltage switchgear and controlgear assemblies Part 1: Type-
tested and partially type-tested assemblies
SANS 62271-200:2004 / IEC 62271-200:2003 NUM 703
High-voltage switchgear and controlgear Part 200: AC metal- SANS 60439-2:2006 / IEC 60439-2:2005 NUM 632
enclosed switchgear and controlgear for rated voltages above 1 kV Low-voltage switchgear and controlgear assemblies Part 2:
and up to and including 52 kV Particular requirements for busbar trunking systems (busways)
SANS 62271-201:2007 / IEC 62271-201:2006 NUM 704 SANS 60439-3:1990 / IEC 60439-3:1990 NUM 632
High-voltage switchgear and controlgear Part 201: AC insulation- Low-voltage switchgear and controlgear assemblies Part 3:
enclosed switchgear and controlgear for rated voltages above 1kV Particular requirements for low-voltage switchgear and controlgear
and up to and including 52 kV assemblies intended to be installed in places where unskilled
persons have access for their use - Distribution boards
SANS 62271-202:2007 / IEC 62271-202:2006 NUM 704
High-voltage switchgear and controlgear Part 202: High- SANS 60439-4:2005 / IEC 60439-4:2004 NUM 632
voltage/low-voltage prefabricated substation Low-voltage switchgear and controlgear assemblies Part 4:
Particular requirements for assemblies for construction sites (ACS)
SANS 62271-203:2004 / IEC 62271-203:2003 NUM 704
High-voltage switchgear and controlgear Part 203: Gas-insulated SANS 60439-5:2006 / IEC 60439-5:2006 NUM 632
metal-enclosed switchgear for rated voltages above 52 kV Low-voltage switchgear and controlgear assemblies Part 5:
Particular requirements for assemblies for power distribution in
SANS 62271-300:2007 / IEC TR 62271-300:2006 NUM 704 public networks
High-voltage switchgear and controlgear Part 300: Seismic
qualification of alternating current circuit-breakers SANS 60890:2007 / IEC 60890:1987 NUM 659
A method of temperature-rise assessment by extrapolation for
SANS 62271-301:2005 / IEC/TR 62271-301:2004 NUM 704 partially type-tested assemblies (PTTA) of low-voltage switchgear
High-voltage switchgear and controlgear Part 301: Dimensional and controlgear
standardisation of terminals
SANS 60947-1:2005 / IEC 60947-1:2004 NUM 661
SANS 62271-310:2005 / IEC/TR 62271-310:2004 NUM 704 Low-voltage switchgear and controlgear Part 1: General rules
High-voltage switchgear and controlgear Part 310: Electrical
endurance testing for circuit-breakers of rated voltage 72,5 kV and SANS 60947-2:2007 / IEC 60947-2:2006 NUM 661
above
Low-voltage switchgear and controlgear Part 2: Circuit-breakers
NRS 003-2:1996 NUM 753
Metal-clad switchgear - For rated a.c. voltages above 1 kV and up SANS 60947-3:2006 / IEC 60947-3:2005 NUM 661
to and including 24 kV Part 2: Standardized panels Low-voltage switchgear and controlgear Part 3: Switches,
disconnectors, switch-disconnectors and fuse-combination units
NRS 036-1:2002 NUM 758
Auto-reclosers and sectionalizers - Pole mounted types Part 1: SANS 60947-4-1:2004 / IEC 60947-4-1:2002 NUM 661
Auto-reclosers with local and remote control capabilities for Low-voltage switchgear and controlgear Part 4-1: Contactors and
nominal a.c. voltages up to 33 kV motor-starters - Electromechanical contactors and motor-starters
NRS 036-2:2004 NUM 759 SANS 60947-4-2:2007 / IEC 60947-4-2:2007 NUM 661
Auto-reclosers and sectionalizers - Pole mounted types Part 2: Low-voltage switchgear and controlgear Part 4-2: Contactors and
Auto-reclosers that have programmable protection features and motor-starters - AC semiconductor motor controllers and starters
local control for nominal a.c. voltages of up to 33 kV
SANS 60947-4-3:2007 / IEC 60947-4-3:2007 NUM 662
NRS 036-3:2004 NUM 759
Low-voltage switchgear and controlgear Part 4-3: Contactors and
Auto-reclosers and sectionalizers - Pole-mounted types Part 3: motor-starters - A.C. semiconductor controllers and contactors for
Sectionalizers for nominal a.c. voltages up to 33 kV non-motor loads
SANS 60947-5-1:2005 / IEC 60947-5-1:2003 NUM 662 SANS 1547:2005 NUM 177
Low-voltage switchgear and controlgear Part 5-1: Control circuit Traffic signal controllers
devices and switching elements - Electromechanical control circuit
devices
SANS 60947-5-2:2005 / IEC 60947-5-2:2004 NUM 662 29.140 Lamps and related equipment
Low-voltage switchgear and controlgear Part 5-2: Control circuit ________________________________________________________
devices and switching elements - Proximity switches SANS 20037:2007 / ECE R37:2005 NUM 554
SANS 60947-5-3:2005 / IEC 60947-5-3:2005 NUM 662 Uniform provisions concerning the approval of filament lamps for
use in approved lamp units of power-driven vehicles and of their
Low-voltage switchgear and controlgear Part 5-3: Control circuit trailers
devices and switching elements - Requirements for proximity
devices with defined behaviour under fault conditions (PDF)
SANS 60947-5-6:1999 / IEC 60947-5-6:1999 NUM 662 SANS 60238:2005 / IEC 60238:2004 NUM 609
Low-voltage switchgear and controlgear Part 5-6: Control circuit Edison screw lampholders
devices and switching elements - DC interface for proximity
sensors and switching amplifiers (NAMUR) SANS 60400:2005 / IEC 60400:2004 NUM 631
SANS 60947-5-7:2003 / IEC 60947-5-7:2003 NUM 663 Lampholders for tubular fluorescent lamps and starterholders
Low-voltage switchgear and controlgear Part 5-7: Control circuit
devices and switching elements - Requirements for proximity SANS 60838-1:2000 / IEC 60838-1:2004 NUM 655
devices with analogue output Miscellaneous lampholders Part 1: General requirements and tests
SANS 60947-5-8:2007 / IEC 60947-5-8:2006 NUM 663
SANS 60838-2-2:2006 / IEC 60838-2-2:2006 NUM 655
Low-voltage switchgear and controlgear Part 5-8: Control circuit
devices and switching elements - Three position enabling switches Miscellaneous lampholders Part 2-2: Particular requirements -
Connectors for LED-modules
SANS 60947-6-1:2006 / IEC 60947-6-1:2005 NUM 663
SANS 61184:1997 / IEC 61184:1997 NUM 679
Low-voltage switchgear and controlgear Part 6-1: Multiple function
equipment - Transfer switching equipment Bayonet lampholders
SANS 60432-3:2005 / IEC 60432-3:2005 NUM 632 SANS 60923:2007 / IEC 60923:2006 NUM 660
Incandescent lamps - Safety specifications Part 3: Tungsten- Auxiliaries for lamps - Ballasts for discharge lamps (excluding
halogen lamps (non-vehicle) tubular fluorescent lamps) - Performance requirements
SANS 61047:2005 / IEC 61047:2004 NUM 676 SANS 60925:2001 / IEC 60925:2001 NUM 660
DC or AC supplied electronic step-down convertors for filament DC supplied electronic ballasts for tubular fluorescent lamps -
lamps - Performance requirements Performance requirements
SANS 61549:2005 / IEC 61549:2005 NUM 690 SANS 60927:2007 / IEC 60927:2007 NUM 660
Miscellaneous lamps Auxiliaries for lamps - Starting devices (other than glow starters) -
Performance requirements
VC 8043:2005 NUM 771 SANS 60929:2006 / IEC 60929:2006 NUM 660
Incandescent lamps AC-supplied electronic ballasts for tubular fluorescent lamps -
Performance requirements
SANS 60598-1:2007 / IEC 60598-1:2006 NUM 635 SANS 60598-2-23:2001 / IEC 60598-2-23:2001 NUM 637
Luminaires Part 1: General requirements and tests Luminaires Part 2-23: Particular requirements - Extra low voltage
lighting systems for filament lamps
SANS 60598-2-1:1979 / IEC 60598-2-1:1979 NUM 635 SANS 60598-2-24:1997 / IEC 60598-2-24:1997 NUM 637
Luminaires Part 2: Particular requirements Section 1: Fixed general Luminaires Part 2: Particular requirements Section 24: Luminaires
purpose luminaires with limited surface temperatures
SANS 60598-2-2:1997 / IEC 60598-2-2:1997 NUM 635 SANS 60598-2-25:1994 / IEC 60598-2-25:1994 NUM 637
Luminaires Part 2: Particular requirements Section 2: Recessed Luminaires Part 2-25: Particular requirements - Luminaires for use
luminaires in clinical areas of hospitals and health care buildings
SANS 60598-2-3:2003 / IEC 60598-2-3:2002 NUM 635
Luminaires Part 2-3: Particular requirements - Luminaires for road 29.140.50 Lighting installation systems
and street lighting
________________________________________________________
SANS 60598-2-4:1997 / IEC 60598-2-4:1997 NUM 635 SANS 60570:2003 / IEC 60570:2003 NUM 635
Luminaires Part 2: Particular requirements Section 4: Portable Electrical supply track systems for luminaires
general purpose luminaires
SANS 60598-2-7:1982 / IEC 60598-2-7:1982 SANS 61347-1:2004 / IEC 61347-1:2003 NUM 685
NUM 636
Luminaires Part 2: Particular requirements Section 7: Portable Lamp controlgear Part 1: General and safety requirements
luminaires for garden use
SANS 61347-1:2007 / IEC 61347-1:2007 NUM 685
SANS 60598-2-8:2001 / IEC 60598-2-8:2001 NUM 636
Lamp controlgear Part 1: General and safety requirements
Luminaires Part 2-8: Particular requirements - Handlamps
SANS 61347-2-1:2006 / IEC 61347-2-1:2006 NUM 685
SANS 60598-2-9:1987 / IEC 60598-2-9:1987 NUM 636
Lamp controlgear Part 2-1: Particular requirements for starting
Luminaires Part 2: Particular requirements Section 9: Photo and devices (other than glow starters)
film luminaires (non-professional)
SANS 61347-2-2:2006 / IEC 61347-2-2:2006 NUM 686
SANS 60598-2-10:2003 / IEC 60598-2-10:2003 NUM 636
Lamp controlgear Part 2-2: Particular requirements for d.c. or a.c.
Luminaires Part 2-10: Particular requirements - Portable luminaires supplied electronic step-down convertors for filament lamps
for children
SANS 61347-2-3:2005 / IEC 61347-2-3:2004 NUM 686
SANS 60598-2-11:2006 / IEC 60598-2-11:2005 NUM 636
Lamp controlgear Part 2-3: Particular requirements for a.c. supplied
Luminaires Part 2-11: Particular requirements - Aquarium electronic ballasts for fluorescent lamps
luminaires
SANS 61347-2-4:2000 / IEC 61347-2-4:2000 NUM 686
SANS 60598-2-12:2006 / IEC 60598-2-12:2006 NUM 636
Lamp controlgear Part 2-4: Particular requirements for d.c supplied
Luminaires Part 2-12: Particular requirements - Mains socket-outlet electronic ballasts for general lighting
mounted nightlights
SANS 61347-2-5:2000 / IEC 61347-2-5:2000 NUM 686
SANS 60598-2-13:2007 / IEC 60598-2-13:2006 NUM 636
Lamp controlgear Part 2-5: Particular requirements for d.c supplied
Luminaires Part 2-13: Particular requirements - Ground recessed electronic ballasts for public transport lighting
luminaires
SANS 61347-2-6:2000 / IEC 61347-2-6:2000 NUM 686
SANS 60598-2-17:1984 / IEC 60598-2-17:1984 NUM 637
Lamp controlgear Part 2-6: Particular requirements for d.c supplied
Luminaires Part 2: Particular requirements Section 17: Luminaires electronic ballasts for aircraft lighting
for stage lighting, television, film and photographic studios (outdoor
and indoor) SANS 61347-2-7:2007 / IEC 61347-2-7:2006 NUM 686
Lamp controlgear Part 2-7: Particular requirements for d.c supplied
SANS 60598-2-18:1993 / IEC 60598-2-18:1993 NUM 637
electronic ballasts for emergency lighting
Luminaires Part 2: Particular requirements Section 18: Luminaires
for swimming pools and similar applications SANS 61347-2-8:2007 / IEC 61347-2-8:2006 NUM 686
Lamp controlgear Part 2-8: Particular requirements for ballasts for
SANS 60598-2-19:1981 / IEC 60598-2-19:1981 NUM 637
fluorescent lamps
Luminaires Part 2: Particular requirements Section 19: Air-handling
luminaires (safety requirements) SANS 61347-2-9:2004 / IEC 61347-2-9:2003 NUM 687
Lamp controlgear Part 2-9: Particular requirements for ballasts for
SANS 60598-2-20:2003 / IEC 60598-2-20:2002 NUM 637
discharge lamps (excluding fluorescent lamps)
Luminaires Part 2-20: Particular requirements - Lighting chains
SANS 61347-2-10:2000 / IEC 61347-2-10:2000 NUM 687 SANS 60034-16-1:1991 / IEC 60034-16-1:1991 NUM 595
Lamp controlgear Part 2-10: Particular requirements for electronic Rotating electrical machines Part 16: Excitation systems for
invertors and convertors for high-frequency operation of cold start synchronous machines Chapter 1: Definitions
tubular discharge lamps (neon tubes)
SANS 60034-16-2:1991 / IEC 60034-16-2:1991 NUM 595
SANS 61347-2-11:2001 / IEC 61347-2-11:2001 NUM 687 Rotating electrical machines Part 16: Excitation systems for
Lamp controlgear Part 2-11: Particular requirements for synchronous machines Chapter 2: Models for power system
miscellaneous electronic circuits used with luminaires studies
SANS 61347-2-13:2007 / IEC 61347-2-13:2006 NUM 687 SANS 60034-18-1:1992 / IEC 60034-18-1:1992 NUM 596
Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. Rotating electrical machines Part 18: Functional evaluation of
supplied electronic controlgear for LED modules insulation systems Section 1: General guidelines
SANS 61995-1:2006 / IEC 61995-1:2005 NUM 697 SANS 60034-18-21:1992 / IEC 60034-18-21:1992 NUM 596
Devices for the connection of luminaires for household and similar Rotating electrical machines Part 18: Functional evaluation of
purposes Part 1: General requirements insulation systems Section 21: Test procedures for wire-wound
windings - Thermal evaluation and classification
29.160.01 Rotating machinery in general SANS 60034-18-22:2000 / IEC 60034-18-22:2000 NUM 596
________________________________________________________ Rotating electrical machines Part 18-22: Functional evaluation of
insulation systems - Test procedures for wire-wound windings -
SANS 1470-3:1997 NUM 164 Classification of changes and insulation component substitutions
Sound power labelling Part 3: Rotating electrical machinery
SANS 60034-18-31:1992 / IEC 60034-18-31:1992 NUM 596
SANS 60034-1:2006 / IEC 60034-1:2004 NUM 593 Rotating electrical machines Part 18: Functional evaluation of
insulation systems Section 31: Test procedures for form-wound
Rotating electrical machines Part 1: Rating and performance windings - Thermal evaluation and classification of insulation
systems used in machines up to and including 50 MVA and 15 kV
SANS 60034-2:1972 / IEC 60034-2:1972 NUM 593
SANS 60034-18-32:1995 / IEC 60034-18-32:1995 NUM 596
Rotating electrical machines Part 2: Methods for determining
losses and efficiency of rotating electrical machinery from tests Rotating electrical machines Part 18: Functional evaluation of
(excluding machines for traction vehicles) insulation systems Section 32: Test procedures for form-wound
windings - Electrical evaluation of insulation systems used in
SANS 60034-2A:1974 / IEC 60034-2A:1974 NUM 593 machines up to and including 50 MVA and 15 kV
Rotating electrical machines Part 2A: Methods for determining SANS 60034-18-33:1995 / IEC 60034-18-33:1995 NUM 596
losses and efficiency of rotating electrical machinery from tests
(excluding machines for traction vehicles) First supplement: Rotating electrical machines Part 18: Functional evaluation of
Measurement of losses by the calorimetric method insulation systems Section 33: Test procedures for form-wound
windings - Multifactor functional evaluation - Endurance under
SANS 60034-4:1985 / IEC 60034-4:1985 NUM 594 combined thermal and electrical stresses of insulation systems
used in machines up to and including 50 MVA and 15 kV
Rotating electrical machines Part 4: Methods for determining
synchronous machine quantities from tests SANS 60034-19:1995 / IEC 60034-19:1995 NUM 597
SANS 60034-5:2007 / IEC 60034-5:2006 NUM 594 Rotating electrical machines Part 19: Specific test methods for d.c.
machines on conventional and rectifier-fed supplies
Rotating electrical machines Part 5: Degrees of protection provided
by the integral design of rotating electrical machines (IP code) - SANS 60034-23:2003 / IEC TS 60034-23:2003 NUM 597
Classification
Rotating electrical machines Part 23: Specification for the
SANS 60034-6:1991 / IEC 60034-6:1991 NUM 594 refurbishing of rotating electrical machines
Rotating electrical machines Part 6: Methods of cooling (IC Code) SANS 60034-26:2006 / IEC 60034-26:2006 NUM 597
Rotating electrical machines Part 26: Effects of unbalanced
SANS 60034-7:2001 / IEC 60034-7:2001 NUM 594 voltages on the performance of three-phase cage induction motors
Rotating electrical machines Part 7: Classification of types of
construction, mounting arrangements and terminal box position (IM SANS 60034-27:2007 / IEC TS 60034-27:2006 NUM 597
Code) Rotating electrical machines Part 27: Off-line partial discharge
measurements on the stator winding insulation of rotating electrical
SANS 60034-8:2007 / IEC 60034-8:2007 NUM 594 machines
Rotating electrical machines Part 8: Terminal markings and
direction of rotation SANS 60072-1:1991 / IEC 60072-1:1991 NUM 599
Dimensions and output series for rotating electrical machines Part
SANS 60034-11:2005 / IEC 60034-11:2004 NUM 594 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
Rotating electrical machines Part 11: Thermal protection
SANS 60072-2:1990 / IEC 60072-2:1990 NUM 599
SANS 60034-14:2007 / IEC 60034-14:2007 NUM 595 Dimensions and output series for rotating electrical machines Part
2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
Rotating electrical machines Part 14: Mechanical vibration of
certain machines with shaft heights 56 mm and higher - SANS 60072-3:1994 / IEC 60072-3:1994 NUM 600
Measurement, evaluation and limits of vibration severity
Dimensions and output series for rotating electrical machines Part
SANS 60034-15:1995 / IEC 60034-15:1995 NUM 595 3: Small built-in motors - Flange numbers BF10 to BF50
Rotating electrical machines Part 15: Impulse voltage withstand
levels of rotating a.c. machines with form-wound stator coils
29.160.10 Components for rotating machines SANS 61800-5-1:2005 / IEC 61800-5-1:2003 NUM 696
________________________________________________________ Adjustable speed electrical power drive systems Part 5-1: Safety
SANS 60034-16-3:1996 / IEC 60034-16-3:1996 NUM 595 requirements - Electrical, thermal and energy
Rotating electrical machines Part 16: Excitation systems for SANS 61800-6:2005 / IEC/TR 61800-6:2003 NUM 696
synchronous machines Section 3: Dynamic performance
Adjustable speed electrical power drive systems Part 6: Guide for
determination of types of load duty and corresponding current
ratings
29.160.20 Generators
________________________________________________________ ARP 061:2006 NUM 722
SANS 60034-3:2006 / IEC 60034-3:2005 NUM 593 Procurement guide for large cage and wound-rotor induction
motors of medium voltage
Rotating electrical machines Part 3: Specific requirements for
cylindrical rotor synchronous machines
SANS 10242-1:1999 NUM 465 SANS 8528-7:1994 / ISO 8528-7:1994 NUM 388
The rewinding and refurbishing of rotating electrical machines Part Reciprocating internal combustion engine driven alternating current
1: Low-voltage three-phase induction motors generating sets Part 7: Technical declarations for specification and
design
SANS 60034-12:2003 / IEC 60034-12:2002 NUM 595
SANS 8528-8:2006 / ISO 8528-8:1995 NUM 388
Rotating electrical machines Part 12: Starting performance of
single-speed three-phase cage induction motors Reciprocating internal combustion engine driven alternating current
generating sets Part 8: Requirements and tests for low-power
SANS 60034-17:2006 / IEC TS 60034-17:2006 NUM 595 generating sets
Rotating electrical machines Part 17: Cage induction motors when SANS 8528-9:2006 / ISO 8528-9:1995 NUM 388
fed from converters - Application guide
Reciprocating internal combustion engine driven alternating current
SANS 60034-25:2007 / IEC TS 60034-25:2007 NUM 597 generating sets Part 9: Measurement and evaluation of mechanical
vibrations
Rotating electrical machines Part 25: Guide for the design and
performance of a.c motors specifically designed for converter SANS 8528-10:2006 / ISO 8528-10:1998 NUM 388
supply
Reciprocating internal combustion engine driven alternating current
SANS 60034-28:2007 / IEC 60034-28:2007 NUM 597 generating sets Part 10: Measurement of airborne noise by the
enveloping surface method
Rotating electrical machines Part 28: Test methods for determining
quantities of equivalent circuit diagrams for three-phase low-voltage SANS 8528-12:2006 / ISO 8528-12:1997 NUM 388
cage induction motors
Reciprocating internal combustion engine driven alternating current
SANS 61800-1:1997 / IEC 61800-1:1997 NUM 695 generating sets Part 12: Emergency power supply to safety
services
Adjustable speed electrical power drive systems Part 1: General
requirements - Rating specifications for low voltage adjustable SANS 61204:1993 / IEC 61204:1993 NUM 679
speed d.c. power drive systems
Low-voltage power supply devices, d.c. output - Performance
SANS 61800-4:2005 / IEC 61800-4:2002 NUM 695 characteristics
Adjustable speed electrical power drive systems Part 4: General
requirements - Rating specifications for a.c. power drive systems
above 1 000 V a.c. and not exceeding 35 kV
NRS 024-1:1994 NUM 757 SANS 60076-14:2005 / IEC TS 60076-14:2004 NUM 601
Diesel alternator sets Part 1: Diesel alternator sets for fixed Power transformers Part 14: Design and application of liquid-
installations - Preferred requirements for applications in their immersed power transformers using high-temperature insulation
organizations by the dc and standby equipment representative user materials
group
SANS 60146-1-3:1991 / IEC 60146-1-3:1991 NUM 607
NRS 024-2:1994 NUM 757 Semiconductor convertors - General requirements and line
Diesel alternator sets Part 2: Mobile or trailer-mounted diesel commutated convertors Part 1-3: Transformers and reactors
alternator sets - Preferred requirements for applications in their
organizations by the DC and standby equipment representative SANS 61378-1:1997 / IEC 61378-1:1997 NUM 687
user group Convertor transformers Part 1: Transformers for industrial
applications
SANS 60044-6:2004 / IEC 60044-6:1992 NUM 598 SANS 61558-2-2:2007 / IEC 61558-2-2:2007 NUM 690
Instrument transformers Part 6: Requirements for protective current Safety of power transformers, power supplies, reactors and similar
transformers for transient performance products Part 2-2: Particular requirements and tests for control
transformers and power supplies incorporating control transformers
SANS 60044-7:1999 / IEC 60044-7:1999 NUM 598
SANS 61558-2-3:1999 / IEC 61558-2-3:1999 NUM 690
Instrument transformers Part 7: Electronic voltage transformers
Safety of power transformers, power supply units and similar
devices Part 2-3: Particular requirements for ignition transformers
SANS 60076-1:1993 / IEC 60076-1:1993 NUM 600 for gas and oil burners
Power transformers Part 1: General
SANS 61558-2-4:1997 / IEC 61558-2-4:1997 NUM 691
SANS 60076-2:1993 / IEC 60076-2:1993 Safety of power transformers, power supply units and similar Part
NUM 600
2-4: Particular requirements for isolating transformers for general
Power transformers Part 2: Temperature rise use
SANS 60076-3:2000 / IEC 60076-3:2000 NUM 600 SANS 61558-2-5:1997 / IEC 61558-2-5:1997 NUM 691
Power transformers Part 3: Insulation levels, dielectric tests and Safety of power transformers, power supply units and similar Part
external clearances in air 2-5: Particular requirements for shaver transformers and shaver
supply units
SANS 60076-4:2004 / IEC 60076-4:2002 NUM 600
SANS 61558-2-6:1997 / IEC 61558-2-6:1997 NUM 691
Power transformers Part 4: Guide to the lightning impulse and
switching impulse testing - Power transformers and reactors Safety of power transformers, power supply units and similar Part
2-6: Particular requirements for safety isolating transformers for
SANS 60076-5:2006 / IEC 60076-5:2006 NUM 600 general use
Power transformers Part 5: Ability to withstand short circuit SANS 61558-2-7:2007 / IEC 61558-2-7:2007 NUM 691
Safety of power transformers, power supplies, reactors and similar
SANS 60076-7:2006 / IEC 60076-7:2005 NUM 600 products Part 2-7: Particular requirements and tests for
Power transformers Part 7: Loading guide for oil-immersed power transformers and power supplies for toys
transformers
SANS 61558-2-8:1998 / IEC 61558-2-8:1998 NUM 691
SANS 60076-8:1997 / IEC 60076-8:1997 NUM 601 Safety of small power transformers, power supply units and similar
Power transformers - Application guide Part 2-8: Particular requirements for bell and chime transformers
SANS 61558-2-13:1999 / IEC 61558-2-13:1999 NUM 692 SANS 60335-2-29:2005 / IEC 60335-2-29:2004 NUM 619
Safety of power transformers, power supply units and similar Household and similar electrical appliances - Safety Part 2-29:
devices Part 2-13: Particular requirements for auto-transformers for Particular requirements for battery chargers
general use
SANS 60478-1:1974 / IEC 60478-1:1974 NUM 633
SANS 61558-2-15:1999 / IEC 61558-2-15:1999 NUM 692 Stabilized power supplies, d.c. output Part 1: Terms and definitions
Safety of power transformers, power supply units and similar Part
2-15: Particular requirements for isolating transformers for the
SANS 60478-4:1976 / IEC 60478-4:1976 NUM 633
supply of medical locations
Stabilized power supplies, d.c. output Part 4: Tests other than
SANS 61558-2-17:1997 / IEC 61558-2-17:1997 NUM 692 radio-frequency interference
Safety of power transformers, power supply units and similar Part
SANS 60478-5:1993 / IEC 60478-5:1993 NUM 633
2-17: Particular requirements for transformers for switch mode
power supplies Stabilized power supplies, d.c. output Part 5: Measurement of the
magnetic component of the reactive near field
SANS 61558-2-19:2000 / IEC 61558-2-19:2000 NUM 692
SANS 60686:1980 / IEC 60686:1980 NUM 641
Safety of power transformers, power supply units and similar
devices Part 2-19: Particular requirements for perturbation Stabilized power supplies, a.c. output
attenuation transformers
SANS 61148:2005 / IEC 61148:1992 NUM 678
SANS 61558-2-20:2000 / IEC 61558-2-20:2000 NUM 692
Terminal markings for valve device stacks and assemblies and for
Safety of power transformers, power supply units and similar power convertor equipment
devices Part 2-20: Particular requirements for small reactors
SANS 61204-3:2000 / IEC 61204-3:2000 NUM 679
SANS 61558-2-23:2000 / IEC 61558-2-23:2000 NUM 693
Low-voltage power supplies, d.c. output Part 3: Electromagnetic
Safety of power transformers, power supply units and similar compatibility (EMC)
devices Part 2-23: Particular requirements for transformers for
construction sites SANS 61204-6:2000 / IEC 61204-6:2000 NUM 679
NRS 029:2002 NUM 757 Low-voltage power supplies, d.c. output Part 6: Requirements for
low-voltage power supplies of assessed performance
Current transformers for rated a.c. voltages from 3,6 kV up to and
including 420 kV (maximum voltage for equipment) SANS 61800-1:1997 / IEC 61800-1:1997 NUM 695
NRS 030:2001 NUM 757 Adjustable speed electrical power drive systems Part 1: General
requirements - Rating specifications for low voltage adjustable
Electricity distribution - Inductive voltage transformers for rated a.c. speed d.c. power drive systems
voltages from 3,6 kV up to and including 145 kV for indoor and
outdoor applications SANS 61800-2:1998 / IEC 61800-2:1998 NUM 695
NRS 054:2002 NUM 762 Adjustable speed electrical power drive systems Part 2: General
requirements - Rating specifications for low voltage adjustable
Power transformers frequency a.c. power drive systems
PIESA 1006:2004 NUM 765 SANS 62040-1-1:2003 / IEC 62040-1-1:2002 NUM 697
Distribution transformers of size up to and including 500 kVA and Uninterruptible power systems (UPS) Part 1-1: General and safety
operating at nominal voltages not exceeding 33 kV requirements for UPS used in operator access areas
SANS 60086-1:2007 / IEC 60086-1:2006 NUM 605 SANS 61056-1:2003 / IEC 61056-1:2002 NUM 676
Primary batteries Part 1: General General purpose lead-acid batteries (valve-regulated types) Part 1:
General requirements, functional characteristics - Methods of test
SANS 60086-2:2007 / IEC 60086-2:2006 NUM 605 SANS 61056-2:2003 / IEC 61056-2:2002 NUM 676
Primary batteries Part 2: Physical and electrical specifications General purpose lead-acid batteries (valve-regulated types) Part 2:
Dimensions, terminals and marking
SANS 60086-3:2005 / IEC 60086-3:2004 NUM 605
SANS 61056-3:2003 / IEC 61056-3:1991 NUM 676
Primary batteries Part 3: Watch batteries
Portable lead-acid cells and batteries (valve-regulated types) Part
3: Safety recommendations for use in electric appliances
SANS 60086-4:2000 / IEC 60086-4:2000 NUM 605
Primary batteries Part 4: Safety of lithium batteries SANS 61427:2005 / IEC 61427:2005 NUM 688
Secondary cells and batteries for photovoltaic energy systems
SANS 60086-5:2005 / IEC 60086-5:2005 NUM 605 (PVES) - General requirements and methods of test
Primary batteries Part 5: Safety of batteries with aqueous SANS 61429:1995 / IEC 61429:1995 NUM 688
electrolyte
Marking of secondary cells and batteries with the international
recycling symbol ISO 7000-1135
29.220.20 Acid secondary cells and batteries SANS 61430:1997 / IEC 61430:1997 NUM 688
________________________________________________________
Secondary cells and batteries - Test methods for checking the
SANS 2:1998 NUM 1 performance of devices designed for reducing explosion hazards -
Lead-acid starter batteries Lead-acid starter batteries
SANS 62133:2005 / IEC 62133:2002 NUM 701 NRS 082:2004 NUM 765
Secondary cells and batteries containing alkaline or other non-acid Recommended maintenance policy for electricity networks
electrolytes - Safety requirements for portable sealed secondary
cells, and for batteries made from them, for use in portable
PIESA 1032:2004 NUM 767
applications
Service distribution boxes - Pole-mounted types for overhead
SANS 62259:2005 / IEC 62259:2003 NUM 702 single-phase a.c. service connections at 230 V
Secondary cells and batteries containing alkaline or other non-acid
electrolytes - Nickel-cadmium prismatic secondary single cells with
partial gas recombination 29.240.10 Substations. Surge arresters
________________________________________________________
SANS 1029:2007 NUM 101
29.240 Power transmission and distribution
Miniature substations
networks
________________________________________________________
SANS 60099-1:1999 / IEC 60099-1:1999 NUM 606
NRS 035-1:2002 NUM 758
Surge arresters Part 1: Non-linear resistor type gapped surge
Outdoor distribution cut-outs Part 1: Drop-out fuse-link assemblies arresters for a.c systems
or solid-link assemblies - Pole-mounted types - For nominal a.c.
voltages up to and including 33 kV SANS 60099-4:2007 / IEC 60099-4:2006 NUM 606
Surge arresters Part 4: Metal-oxide surge arresters without gaps for
a.c. systems
29.240.01 Power transmission and distribution
networks in general SANS 60099-5:2007 / IEC 60099-5:2000 NUM 606
________________________________________________________ Surge arresters Part 5: Selection and application recommendations
NRS 032:2001 NUM 757
SANS 60099-6:2005 / IEC 60099-6:2002 NUM 606
Service distribution boxes - Pole-mounted types - For overhead
single-phase a.c. service connections at 230 V Surge arresters Part 6: Surge arresters containing both series and
parallel gapped structures - Rated 52 kV and less
NRS 034-0:2001 NUM 758
SANS 60099-7:2005 / IEC/PAS 60099-7:2004 NUM 606
Electricity distribution - Guidelines for the provision of electrical
distribution networks in residential areas Part 0: Definitions Surge arresters Part 7: Glossary of terms and definitions from IEC
publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12,
NRS 035-2:2002 NUM 758 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341
Outdoor distribution cut-outs Part 2: Expulsion fuse-links - For
SANS 61330:1995 / IEC 61330:1995 NUM 685
nominal a.c. voltages up to and including 33 kV
High-voltage/low-voltage prefabricated substations
NRS 040-1:1999 NUM 759
High-voltage operating regulations Part 1: Definitions - Preferred SANS 61643-1:2006 / IEC 61643-1:2005 NUM 693
definitions for systems, equipment and conditions relating to the
Low-voltage surge protective devices Part 1: Surge protective
generation, transmission and distribution of electricity
devices connected to low-voltage power distribution systems -
NRS 040-2:2000 NUM 760 Requirements and tests
High-voltage operating regulations Part 2: Voltage colour coding for SANS 61643-12:2003 / IEC 61643-12:2002 NUM 693
diagrammatic displays in control rooms - Colour coding for wall-
Low-voltage surge protective devices Part 12: Surge protective
mounted operating diagrams and electronic displays relating to the
devices connected to low-voltage power distribution systems -
generation, transmission and distribution of electricity
Selection and application principles
NRS 040-3:2002 NUM 760
NRS 037-3:2005 NUM 759
High-voltage operating regulations Part 3: Model regulations -
Telecontrol protocol Part 3: Intercontrol centre communications
Recommended model regulations relating to power systems for
protocol
operating, access control and supervision of systems that exceed 1
000 V, for the transmission and distribution of electricity NRS 039-1:1999 NUM 759
NRS 042:2004 NUM 760 Surge arresters for use in distribution systems Part 1: Guide for the
application of gapless metal-oxide surge arresters
Guide for the protection of electronic equipment against damaging
transients NRS 039-2:1999 NUM 759
NRS 056-1:2005 NUM 762 Surge arresters for use in distribution systems Part 2: Distribution
class, gapless metal-oxide surge arresters
Service distribution boxes - Meter kiosks and distribution kiosks
Part 1: Low-voltage non-steel meter kiosks for use in underground NRS 076:2005 NUM 764
networks
Earthing of distribution substations with nominal voltages up to and
NRS 056-2:2004 NUM 762 including 132 kV
Service distribution boxes - Meter kiosks and distribution kiosks
Part 2: Specification for ground-mounted, low-voltage distribution
kiosks 29.240.20 Power transmission and distribution
lines
NRS 069:2004 NUM 763 ________________________________________________________
Code of practice for the recovery of capital costs for distribution
network assets
SANS 60439-5:2006 / IEC 60439-5:2006 NUM 632 NRS 009-6-1:1997 NUM 754
Low-voltage switchgear and controlgear assemblies Part 5: Electricity sales systems Part 6: Interface standards - Section 1:
Particular requirements for assemblies for power distribution in Credit dispensing unit - Standard token translator interface
public networks
NRS 009-6-3:1997 NUM 754
SANS 60694:2003 / IEC 60694:2002 NUM 641 Electricity sales systems Part 6: Interface standards Section 3:
Common specifications for high-voltage switchgear and controlgear System master station - Credit dispensing unit
standards
NRS 009-6-4:1998 NUM 754
NRS 036-1:2002 NUM 758 Electrical sales systems Part 6: Interface standards Section 4:
Auto-reclosers and sectionalizers - Pole mounted types Part 1: Data transfer by physical media - System master station - Credit
Auto-reclosers with local and remote control capabilities for dispensing unit
nominal a.c. voltages up to 33 kV
NRS 009-6-6:2002 NUM 755
NRS 036-2:2004 NUM 759 Electricity sales systems Part 6: Interface standards Section 6:
Auto-reclosers and sectionalizers - Pole mounted types Part 2: Standard transfer specification/Credit dispensing unit - Electricity
Auto-reclosers that have programmable protection features and dispenser - Categories of token and transaction data fields
local control for nominal a.c. voltages of up to 33 kV
NRS 009-6-7:2002 NUM 755
NRS 036-3:2004 NUM 759 Electricity sales systems Part 6: Interface standards Section 7:
Auto-reclosers and sectionalizers - Pole-mounted types Part 3: Standard transfer specification/ Credit dispensing unit - Electricity
Sectionalizers for nominal a.c. voltages up to 33 kV dispenser - Token encoding and data encryption and decryption
Diesel engines modified for use in hazardous locations (other than SANS 60079-0:2005 / IEC 60079-0:2004 NUM 601
in mines)
Electrical apparatus for explosive gas atmospheres Part 0: General
SANS 1489:2001 NUM 167 requirements
Flameproof restrained and bolted type plugs and sockets SANS 60079-1:2004 / IEC 60079-1:2003 NUM 601
Electrical apparatus for explosive gas atmospheres Part 1:
SANS 1515-1:2006 NUM 171 Flameproof enclosures "d"
Gas measuring equipment primarily for use in mines Part 1:
SANS 60079-1-1:2004 / IEC 60079-1-1:2002 NUM 601
Battery-operated portable, flammable gas measuring instruments
and warning devices Electrical apparatus for explosive gas atmospheres Part 1:
Flameproof enclosures "d" - Method of test for ascertainment of
SANS 1515-2:2006 NUM 171 maximum experimental safe gap
Gas measuring equipment primarily for use in mines Part 2: Fixed,
SANS 60079-2:2007 / IEC 60079-2:2007 NUM 602
transportable, and vehicle-mounted flammable gas measuring and
warning sensor heads and instruments Explosive atmospheres Part 2: Equipment protection by
pressurized enclosures <<p>>
SANS 1520-1:2001 NUM 172
SANS 60079-4:1975 / IEC 60079-4:1975 NUM 602
Flexible electric trailing cables for use in mines Part 1: Low-voltage
(640/1 100 V and 1 900/3 300 V) cables Electrical apparatus for explosive gas atmospheres Part 4: Method
of test for ignition temperature
SANS 1520-2:2000 NUM 172
SANS 60079-5:1997 / IEC 60079-5:1997 NUM 602
Flexible electric trailing cables for use in mines Part 2: High-voltage
(3,8/6,6 kV to 19/33 kV) cables Electrical apparatus for explosive gas atmospheres Part 5: Powder
filling "q"
SANS 1600:2007 NUM 185
SANS 60079-6:1995 / IEC 60079-6:1995 NUM 602
Permitted electric detonators
Electrical apparatus for explosive gas atmospheres Part 6: Oil-
immersion "o"
SANS 1654:2004 NUM 190
D.c.-powered (battery-operated) machines for use in hazardous SANS 60079-7:2007 / IEC 60079-7:2006 NUM 602
locations in mines Explosive atmospheres Part 7: Equipment protection by increased
safety "e"
SANS 1717-1:2005 NUM 219
The design of detonator initiation systems for use in mining and SANS 60079-10:2005 / IEC 60079-10:2002 NUM 602
civil blasting applications Part 1: Electronic initiation systems Electrical apparatus for explosive gas atmospheres Part 10:
Classification of hazardous areas
SANS 1717-2:2007 NUM 219
The design and approval of detonator initiation systems for use in SANS 60079-11:2007 / IEC 60079-11:2006 NUM 602
mining and civil blasting applications Part 2: Electric initiation Explosive atmospheres Part 11: Equipment protection by intrinsic
systems - Shot exploder based safety "i"
SANS 10086-1:2003 NUM 411 SANS 60079-12:1978 / IEC 60079-12:1978 NUM 603
The installation, inspection and maintenance of equipment used in Electrical apparatus for explosive gas atmospheres Part 12:
explosive atmospheres Part 1: Installations including surface Classification of mixtures of gases or vapours with air according to
installations on mines their maximum experimental safe gaps and minimum igniting
currents
SANS 60079-13:1982 / IEC 60079-13:1982 NUM 603 SANS 61241-4:2001 / IEC 61241-4:2001 NUM 681
Electrical apparatus for explosive gas atmospheres Part 13: Electrical apparatus for use in the presence of combustible dust
Construction and use of rooms or buildings protected by Part 4: Type of protection "pD"
pressurization
SANS 61241-10:2005 / IEC 61241-10:2004 NUM 681
SANS 60079-14:2003 / IEC 60079-14:2002 NUM 603 Electrical apparatus for use in the presence of combustible dust
Electrical apparatus for explosive gas atmospheres Part 14: Part 10: Classification of areas where combustible dusts are or
Electrical installations in hazardous areas (other than mines) may be present
SANS 60079-15:2006 / IEC 60079-15:2005 NUM 603 SANS 61241-14:2005 / IEC 61241-14:2004 NUM 681
Electrical apparatus for explosive gas atmospheres Part 15: Electrical apparatus for use in the presence of combustible dust
Construction, test and marking of type of protection "n" electrical Part 14: Selection and installation
apparatus
SANS 61241-17:2006 / IEC 61241-17:2005 NUM 681
SANS 60079-16:1990 / IEC 60079-16:1990 NUM 603 Electrical apparatus for use in the presence of combustible dust
Electrical apparatus for explosive gas atmospheres Part 16: Part 17: Inspection and maintenance of electrical installations in
Artificial ventilation for the protection of analyzer(s) houses hazardous areas (other than mines)
SANS 60079-17:2003 / IEC 60079-17:2002 NUM 603 SANS 61241-18:2005 / IEC 61241-18:2004 NUM 681
Electrical apparatus for explosive gas atmospheres Part 17: Electrical apparatus for use in the presence of combustible dust
Inspection and maintenance of electrical installations in hazardous Part 18: Protection by encapsulation "mD"
areas (other than mines)
SANS 62086-1:2003 / IEC 62086-1:2001 NUM 700
SANS 60079-18:2005 / IEC 60079-18:2004 NUM 604 Electrical apparatus for explosive gas atmospheres - Electrical
Electrical apparatus for explosive gas atmospheres Part 18: resistance trace heating Part 1: General and testing requirements
Construction, test and marking of type of protection encapsulation
"m" electrical apparatus SANS 62086-2:2003 / IEC 62086-2:2001 NUM 700
Electrical apparatus for explosive gas atmospheres - Electrical
SANS 60079-19:2007 / IEC 60079-19:2006 NUM 604 resistance trace heating Part 2: Application for design, installation
Explosive atmospheres Part 19: Equipment repair, overhaul and and maintenance
reclamation
ARP 0108:2007 NUM 725
SANS 60079-20:1996 / IEC 60079-20:1996 NUM 604 Regulatory requirements for explosion-protected apparatus
Electrical apparatus for explosive gas atmospheres Part 20: Data
for flammable gases and vapours relating to the use of electrical
apparatus
29.260.99 Other electrical equipment for
SANS 60079-25:2003 / IEC 60079-25:2003 NUM 604 working in special conditions
Electrical apparatus for explosive gas atmospheres Part 25: ________________________________________________________
Intrinsically safe systems
SANS 1934:2004 NUM 242
SANS 60079-26:2007 / IEC 60079-26:2006 NUM 604 Live working - Portable equipment for earthing or earthing and
Explosive atmospheres Part 26: Equipment with equipment short-circuiting - National modifications to international
protection level (EPL) Ga requirements
SANS 60079-27:2006 / IEC 60079-27:2005 NUM 604 SANS 61230:1993 / IEC 61230:1993 NUM 680
Electrical apparatus for explosive gas atmospheres Part 27: Live working - Portable equipment for earthing or earthing and
Fieldbus intrinsically safe concept (FISCO) and Fieldbus non- short-circuiting
incendive concept (FNICO)
SANS 61243-1:2007 / IEC 61243-1:2003 NUM 681
SANS 61241-0:2005 / IEC 61241-0:2004 NUM 680 Live working - Voltage detectors Part 1: Capacitive type to be used
Electrical apparatus for use in the presence of combustible dust for voltages exceeding 1 kV a.c.
Part 0: General requirements
SANS 61243-2:2003 / IEC 61243-2:2002 NUM 682
SANS 61241-1:2005 / IEC 61241-1:2004 NUM 680 Live working - Voltage detectors Part 2: Resistive type to be used
Electrical apparatus for use in the presence of combustible dust for voltages of 1 kV to 36 kV a.c.
Part 1: Protection by enclosures "tD"
SANS 61243-3:1998 / IEC 61243-3:1998 NUM 682
SANS 61241-2-1:1994 / IEC 61241-2-1:1994 NUM 680 Live working - Voltage detectors Part 3: Two-pole low-voltage type
Electrical apparatus for use in the presence of combustible dust
Part 2: Test methods Section 1: Methods for determining the SANS 61243-5:1997 / IEC 61243-5:1997 NUM 682
minimum ignition temperatures of dust
Live working - Voltage detectors Part 5: Voltage detecting systems
SANS 61241-2-2:1993 / IEC 61241-2-2:1993 NUM 680 (VDS)
Electrical apparatus for use in the presence of combustible dust SANS 61481:2005 / IEC 61481:2004 NUM 689
Part 2: Test methods Section 2: Method for determining the
Live working - Portable phase comparators for use on voltages
electrical resistivity of dust in layers
from 1 kV to 36 kV a.c.
SANS 61241-2-3:1994 / IEC 61241-2-3:1994 NUM 681
Electrical apparatus for use in the presence of combustible dust 29.280 Electric traction equipment
Part 2: Test methods Section 3: Method for determining minimum
________________________________________________________
ignition energy of dust/air mixtures
31.260 Optoelectronics. Laser equipment SANS 300386:2006 / ETSI EN 300386:2005 NUM 711
________________________________________________________ Electromagnetic compatibility and Radio spectrum Matters (ERM);
Telecommunication network equipment; ElectroMagnetic
SANS 1777:2004 NUM 223 Compatibility (EMC) requirements
Photoelectric control units for lighting (PECUs)
33.030 Telecommunication services. Public Switched Telephone Network (PSTN); 2-wire analogue voice
band switched interfaces; Timed break recall (register recall);
Applications Specific requirements for terminals
________________________________________________________
NRS 044:2002 NUM 760
33.040.40 Data communication networks
Working procedures and standards in respect of the installation of
________________________________________________________
new electrical works and telecommunication facilities, or the
extension or modification of such existing works and facilities
SANS 13869:1995 / ISO/IEC 13869:1995 NUM 513 SANS 1609-1:2005 NUM 185
Information technology - Telecommunications and information Radio transmissions in the VHF band Part 1: Transmission
exchange between systems - Private Integrated Services Network - standards for FM sound broadcasting
Inter-exchange signalling protocol - Call transfer supplementary
service SANS 1625:2006 NUM 187
Amplitude-modulated (AM) broadcast transmissions in the LF, MF
SANS 13873:1995 / ISO/IEC 13873:1995 NUM 514 and HF bands
Information technology - Telecommunications and information
exchange between systems - Private Integrated Services Network -
Inter-exchange signalling protocol - Call diversion supplementary 33.060.20 Receiving and transmitting
services
equipment
SANS 301489-17:2005 / ETSI EN 301489-17:2002 NUM 717 ________________________________________________________
Electromagnetic compatibility and Radio spectrum Matters (ERM); SANS 2343:1991 / MPT 1343:1991 NUM 249
ElectroMagnetic Compatibility (EMC) standard for radio equipment Performance specification. System interface specification for radio
and services Part 17: Specific conditions for 2,4 GHz wideband units to be used with commercial trunked networks operating in
transmission systems and 5 GHz high performance RLAN Band III sub-bands 1 and 2
equipment
SANS 2352:1991 NUM 249
Test schedule for the approval of radio units to be used with
33.040.99 Other equipment for commercial trunked networks operating in Band III subbands 1 and
telecommunication systems 2
________________________________________________________
SANS 10397:2003 NUM 484
NRS 043:2005 NUM 760
Environmental considerations for the planning and management of
Joint use of structures for power and telecommunication lines telecommunication structures
SANS 300220-1:2006 / ETSI EN 300220-1:2006 NUM 709 SANS 301489-19:2004 / ETSI EN 301489-19:2002 NUM 717
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment to be used in the 25 ElectroMagnetic Compatibility (EMC) standard for radio equipment
MHz to 1 000 MHz frequency range with power levels ranging up to and services Part 19: Specific conditions for Receive Only Mobile
500 mW; Part 1: Technical characteristics and test methods Earth Stations (ROMES) operating in the 1,5 GHz band providing
data communications
SANS 300220-3:2005 / ETSI EN 300220-3:2000 NUM 709
Electromagnetic compatibility and Radio spectrum Matters (ERM); SANS 301843-1:2005 / ETSI EN 301843-1:2004 NUM 719
Short Range Devices (SRD); Radio equipment to be used in the 25 Electromagnetic compatibility and Radio spectrum Matters (ERM);
MHz to 1 000 MHz frequency range with power levels ranging up to ElectroMagnetic Compatibility (EMC) standard for marine radio
500 mW; Part 3: Harmonized EN covering essential requirements equipment and services; Part 1: Common technical requirements
under article 3.2 of the R&TTE Directive
SANS 301843-2:2005 / ETSI EN 301843-2:2004 NUM 719
SANS 300296-2:2004 / ETSI EN 300296-2:2001 NUM 710 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio
Land Mobile Service; Radio equipment using integral antennas equipment and services Part 2: Specific conditions for VHF
intended primarily for analogue speech Part 2: Harmonized EN radiotelephone transmitters and receivers
covering essential requirements under article 3.2 of the R&TTE
Directive SANS 301893:2006 / ETSI EN 301893:2005 NUM 719
Broadband Radio Access Networks (BRAN); 5 GHz high
SANS 300328:2007 / ETSI EN 300328:2006 NUM 710 performance RLAN; Harmonized EN covering essential
Electromagnetic compatibility and Radio spectrum Matters (ERM); requirements of article 3.2 of the R&TTE Directive
Wideband transmission systems; Data transmission equipment
operating in the 2,4 GHz ISM band and using wide band SANS 301908-3:2006 / ETSI EN 301908-3:2003 NUM 719
modulation techniques; Harmonized EN covering essential Electromagnetic compatibility and Radio spectrum Matters (ERM);
requirements under article 3.2 of the R&TTE Directive Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
2000 Third-Generation cellular networks Part 3: Harmonized EN for
SANS 300330-1:2006 / ETSI EN 300330-1:2006 NUM 710 IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering
Electromagnetic compatibility and Radio spectrum Matters (ERM); essential requirements of article 3.2 of the R&TTE Directive
Short Range Devices (SRD); Radio equipment in the frequency
range 9 kHz to 25 MHz and inductive loop systems in the frequency SANS 301908-4:2006 / ETSI EN 301908-4:2003 NUM 719
range 9 kHz to 30 MHz; Part 1: Technical characteristics and test Electromagnetic compatibility and Radio spectrum Matters (ERM);
methods Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
2000 Third-Generation cellular networks Part 4: Harmonized EN for
SANS 300330-2:2006 / ETSI EN 300330-2:2006 NUM 710 IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential
Electromagnetic compatibility and Radio spectrum Matters (ERM); requirements of article 3.2 of the R&TTE Directive
Short Range Devices (SRD); Radio equipment in the frequency
range 9 kHz to 25 MHz and inductive loop systems in the frequency SANS 301908-5:2006 / ETSI EN 301908-5:2003 NUM 719
range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of Electromagnetic compatibility and Radio spectrum Matters (ERM);
the R&TTE Directive Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
2000 Third-Generation cellular networks Part 5: Harmonized EN for
SANS 301489-1:2005 / ETSI EN 301489-1:2005 NUM 715 IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - covering essential requirements of article 3.2 of the R&TTE
ElectroMagnetic Compatibility (EMC) standard for radio equipment Directive
and services Part 1: Common technical requirements
SANS 301908-6:2006 / ETSI EN 301908-6:2003 NUM 720
SANS 301489-3:2005 / ETSI EN 301489-3:2002 NUM 715 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
ElectroMagnetic Compatibility (EMC) standard for radio equipment 2000 Third-Generation cellular networks Part 6: Harmonized EN for
and services Part 3: Specific conditions for Short-Range Devices IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential
(SRD) operating on frequencies between 9 kHz and 40 GHz requirements of article 3.2 of the R&TTE Directive
SANS 301489-5:2003 / ETSI EN 301489-5:2002 NUM 715 SANS 301908-7:2006 / ETSI EN 301908-7:2005 NUM 720
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
and services Part 5: Specific conditions for Private land Mobile 2000 Third-Generation cellular networks Part 7: Harmonized EN for
Radio (PMR) and ancillary equipment (speech and non-speech) IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive
SANS 301489-11:2004 / ETSI EN 301489-11:2002 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM); SANS 301908-8:2006 / ETSI EN 301908-8:2002 NUM 720
ElectroMagnetic Compatibility (EMC) standard for radio equipment Electromagnetic compatibility and Radio spectrum Matters (ERM);
and services Part 11: Specific conditions for terrestrial sound Base Stations (BS) Repeaters and User Equipment (UE) for IMT-
broadcasting service transmitters 2000 Third-Generation cellular networks Part 8: Harmonized EN for
IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering
SANS 301489-15:2004 / ETSI EN 301489-15:2002 NUM 716 essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services Part 15: Specific conditions for commercially available 33.060.30 Radio relay and fixed satellite
amateur radio equipment communications sytems
________________________________________________________
SANS 1790-1:2007 NUM 224
Low power radio broadcast transmissions Part 1: AM transmissions
SANS 1790-2:2007 NUM 224 SANS 301128:2005 / ETSI EN 301128:2001 NUM 713
Low power radio broadcast transmissions Part 2: FM transmissions Fixed Radio Systems; Point-to-point equipment; Plesiochronous
Digital Hierarchy (PDH); Low and medium capacity digital radio
systems operating in the 13 GHz, 15 GHz and 18 GHz frequency
SANS 300197:2005 / ETSI EN 300197:2002 NUM 709
bands
Fixed Radio Systems; Point-to-point equipment; Parameters for
radio systems for the transmission of digital signals operating at 32 SANS 301213-1:2005 / ETSI EN 301213-1:2002 NUM 714
GHz and 38 GHz Fixed Radio Systems; Point-to-multipoint equipment; Point-to-
multipoint digital radio systems in frequency bands in the range
SANS 300198:2005 / ETSI EN 300198:2002 NUM 709
24,25 GHz to 29,5 GHz using different access methods Part 1:
Fixed Radio Systems; Point-to-point equipment; Parameters for Basic parameters
radio systems for the transmission of digital signals operating at 23
GHz SANS 301216:2005 / ETSI EN 301216:2001 NUM 714
Fixed Radio Systems; Point-to-point equipment; Plesiochronous
SANS 300421:2007 / ETS 300421:1997 NUM 711
Digital Hierarchy (PDH); Low and medium capacity and STM-O
Digital Video Broadcasting (DVB); Framing structure, channel digital radio system operating in the frequency bands in the range 3
coding and modulation for 11/12 GHz satellite services GHz to 11 GHz
SANS 300430:2005 / ETSI EN 300430:2002 NUM 711 SANS 301277:2005 / ETSI EN 301277:2001 NUM 714
Fixed Radio Systems; Point-to-point equipment; Parameters for Fixed Radio Systems; Point-to-point equipment; High capacity
radio systems for the transmission of STM-1 digital signals digital radio systems transmitting STM-4 or 4 x STM-1 in a 40 MHz
operating in the 18 GHz frequency band with channel spacing of 55 radio frequency channel using Co-Channel Dual Polarized (CCDP)
MHz and 27,5 MHz operation
SANS 300431:2005 / ETSI EN 300431:2002 NUM 711 SANS 301428:2005 / ETSI EN 301428:2001 NUM 714
Fixed Radio Systems; Point-to-point equipment; Parameters for Satellite Earth Stations and Systems (SES); Harmonized EN for
radio system for the transmission of digital signals operating in the Very Small Aperture Terminal (VSAT); Transmit-only,
frequency range 24,50 GHz to 29,50 GHz transmit/receive or receive-only satellite earth stations operating in
the 11/12/14 GHz frequency bands covering essential requirements
SANS 300473:2007 / ETS 300473:1997 NUM 712 under article 3.2 of the R&TTE directive
Digital Video Broadcasting (DVB); Satellite Master Antenna
Television (SMATV) distribution systems SANS 301430:2005 / ETSI EN 301430:2000 NUM 714
Satellite Earth Stations and Systems (SES); Harmonized EN for
SANS 300630:2005 / ETSI EN 300630:2001 NUM 712 Satellite News Gathering Transportable Earth Stations (SNG TES)
Fixed Radio Systems; Point-to-point equipment; Low capacity operating in the 11-12/13-14 GHz frequency bands covering
point-to-point digital radio systems operating in the 1,4 GHz essential requirements under article 3.2 of the R&TTE directive
frequency band
SANS 301443:2005 / ETSI EN 301443:2001 NUM 714
SANS 300633:2005 / ETSI EN 300633:2001 NUM 712 Satellite Earth Stations and Systems (SES); Harmonized EN for
Fixed Radio Systems; Point-to-point equipment; Low and medium Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-
capacity point-to-point digital radio systems operating in the receive, receive-only satellite earth stations operating in the 4 GHz
frequency range 2,1 GHz to 2,6 GHz and 6 GHz frequency bands covering essential requirements under
article 3.2 of the R&TTE Directive
SANS 300636:2005 / ETSI EN 300636:2001 NUM 712
SANS 301461:2005 / ETSI EN 301461:2002 NUM 715
Fixed Radio Systems; Point-to-multipoint equipment; Time Division
Multiple Access (TDMA); Point-to-multipoint digital radio systems in Fixed Radio Systems; Point-to-point equipment; High capacity fixed
frequency bands in the range 1 GHz to 3 GHz radio systems carrying SDH signals (2 x STM-1) in frequency
bands with 40 MHz channel spacing and using Co-Channel Dual
SANS 300639:2005 / ETSI EN 300639:2001 NUM 712 Polarized (CCDP) operation
Fixed Radio Systems; Point-to-point equipment; Sub-STM-1 digital
SANS 301489-12:2005 / ETSI EN 301489-12:2003 NUM 716
radio systems operating in the 13 GHz, 15 GHz and 18 GHz
frequency bands with about 28 MHz co-polar and 14 MHz cross- Electromagnetic compatibility and Radio Spectrum Matters (ERM);
polar channel spacing ElectroMagnetic compatibility (EMC) standard for radio equipment
and services Part 12: Specific conditions for Very Small Aperture
SANS 300786:2005 / ETSI EN 300786:2001 NUM 713 Terminal, Satellite Interactive Earth Stations operated in the
Fixed Radio Systems; Point-to-point equipment; Sub-STM-1 digital frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite
radio systems operating in the 13 GHz, 15 GHz and 18 GHz Service (FSS)
frequency bands with about 14 MHz co-polar channel spacing
SANS 301669:2005 / ETSI EN 301669:2001 NUM 718
SANS 301021:2005 / ETSI EN 301021:2003 NUM 713 Fixed Radio Systems; Point-to-point equipment; High capacity
Fixed Radio Systems; Point-to-multipoint equipment; Time Division digital radio systems carrying STM-4 in two 40 MHz channels or 2 x
Multiple Access (TDMA); Point-to-multipoint digital radio systems in STM-1 in a 40 MHz channel with alternate channel arrangement
frequency bands in the range 3 GHz to 11 GHz
SANS 301751:2005 / ETSI EN 301751:2002 NUM 718
SANS 301127:2005 / ETSI EN 301127:2002 NUM 713 Fixed Radio Systems; Point-to-point equipments and antennas;
Fixed Radio Systems; Point-to-point equipment; High capacity Generic harmonized standard for Point-to-Point digital fixed radio
digital radio systems carrying SDH signals (up to 2 x STM-1) in systems and antennas covering the essential requirements under
frequency bands with about 30 MHz channel spacing and using co- article 3.2 of the 1999/5/EC Directive
polar arrangements or Co-Channel Dual Polarized (CCDP)
SANS 301753:2005 / ETSI EN 301753:2003 NUM 718
operation
Fixed Radio Systems; Multipoint equipment and antennas; Generic
harmonized standard for multipoint digital fixed radio systems and
antennas covering the essential requirements under article 3.2 of
the Directive 1999/5/EC
33.060.40 Cabled distribution systems SANS 100053:1998 / ETSI TR 100 053:1998 NUM 705
________________________________________________________ Electromagnetic compatibility and Radio spectrum Matters (ERM);
SANS 2347:1991 / MPT 1347:1991 NUM 249 Radio site engineering for radio equipment and systems in the
mobile service
Radio interface specification for commercial trunked networks
operating in Band III, sub-band 1 and 2 SANS 200053:2006 / ETSI EG 200053:2004 NUM 707
SANS 60728-2:2005 / IEC 60728-2:2002 NUM 642 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Radio site engineering for radio equipment and systems
Cabled distribution systems for television and sound signals Part 2:
Electromagnetic compatibility for equipment SANS 301489-18:2003 / ETSI EN 301489-18:2002 NUM 717
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
33.060.99 Other equipment for and services Part 18: Specific conditions for Terrestrial Trunked
radiocommunications Radio (TETRA) equipment
________________________________________________________
SANS 301489-22:2005 / ETSI EN 301489-22:2003 NUM 717
SANS 102178:2006 / ETSI TS 102178:2006 NUM 706
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Broadband Radio Access Networks (BRAN); HiperMAN; Data Link ElectroMagnetic Compatibility (EMC) standard for radio equipment
Control (DLC) layer and services Part 22: Specific conditions for ground based VHF
aeronautical mobile and fixed radio equipment
SANS 300440-1:2006 / ETSI EN 300440-1:2001 NUM 712
Electromagnetic compatibility and Radio spectrum Matters (ERM); SANS 301489-23:2005 / ETSI EN 301489-23:2002 NUM 717
Short range devices; Radio equipment to be used in the 1 GHz to Electromagnetic compatibility and Radio spectrum Matters (ERM);
40 GHz frequency range Part 1: Technical characteristics and test ElectroMagnetic Compatibility (EMC) standard for radio equipment
methods and services Part 23: Specific conditions for IMT-2000 CDMA
Direct Spread (UTRA) Base Station (BS) radio, repeater and
SANS 300836-1:2006 / ETS 300836-1:1998 NUM 713 ancillary equipment
Broadband Radio Access Networks (BRAN); HIgh PErformance
Radio Local Area Network (HIPERLAN) Type 1; Conformance SANS 301489-24:2006 / ETSI EN 301489-24:2005 NUM 717
testing specification Part 1: Radio type approval and Radio Electromagnetic compatibility and Radio spectrum Matters (ERM);
Frequency (RF) conformance test specification ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services Part 24: Specific conditions for IMT-2000 CDMA
SANS 301489-4:2005 / ETSI EN 301489-4:2002 NUM 715 Direct Spread (UTRA) for Mobile and portable (UE) radio and
Electromagnetic compatibility and Radio spectrum Matters (ERM); ancillary equipment
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services Part 4: Specific conditions for fixed radio links and SANS 301489-25:2006 / ETSI EN 301489-25:2005 NUM 718
ancillary equipment and services Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services Part 25: Specific conditions for CDMA 1x spread
33.070.01 Mobile services in general spectrum Mobile Stations and ancillary equipment
________________________________________________________
SANS 301489-26:2005 / ETSI EN 301489-26:2005 NUM 718
SANS 301489-7:2006 / ETSI EN 301489-7:2005 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 26: Specific conditions for CDMA 1x spread
and services Part 7: Specific conditions for mobile and portable spectrum Base Stations, repeaters and ancillary equipment
radio and ancillary equipment of digital cellular radio
telecommunications systems (GSM and DCS) SANS 303035-1:2004 / ETSI EN 303035-1:2001 NUM 720
Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA
SANS 301908-9:2006 / ETSI EN 301908-9:2002 NUM 720
equipment covering essential requirements under article 3.2 of the
Electromagnetic compatibility and Radio spectrum Matters (ERM); R&TTE Directive Part 1: Voice plus Data (V+D)
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
2000 Third-Generation cellular networks Part 9: Harmonized EN for SANS 303035-2:2004 / ETSI EN 303035-2:2003 NUM 720
IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA
essential requirements of article 3.2 of the R&TTE Directive equipment covering essential requirements under article 3.2 of the
R&TTE Directive Part 2: Direct Mode Operation (DMO)
SANS 2362:1997 / MPT 1362:1997 NUM 249 33.070.30 Digital Enhanced Cordless
Installation of mobile radio equipment in land based vehicles Telecommunications (DECT)
________________________________________________________
SANS 10262-1:2006 NUM 468 SANS 300175-1:2005 / ETSI EN 300175-1:2005 NUM 709
Radio sites Part 1: Technical performance (narrowband analog Digital Enhanced Cordless Telecommunications (DECT); Common
mobile radio services) Interface (CI) Part 1: Overview
SANS 300175-2:2005 / ETSI EN 300175-2:2005 NUM 709 SANS 61000-2-3:2007 / IEC 61000-2-3:1992 NUM 666
Digital Enhanced Cordless Telecommunications (DECT); Common Electromagnetic compatibility (EMC) Part 2: Environment Section
Interface (CI) Part 2: Physical Layer (PHL) 3: Description of the environment - Radiated and non-network-
frequency-related conducted phenomena
SANS 301406:2005 / ETSI EN 301406:2003 NUM 714
Digital Enhanced Cordless Telecommunications (DECT); SANS 61000-2-11:2006 / IEC 61000-2-11:1999 NUM 667
Harmonized EN for Digital Enhanced Cordless Electromagnetic compatibility (EMC) Part 2-11: Environment -
Telecommunications (DECT) covering essential requirements Classification of HEMP environments
under article 3.2 of the R&TTE Directive; Generic radio
SANS 61000-2-13:2007 / IEC 61000-2-13:2005 NUM 667
SANS 301489-6:2005 / ETSI EN 301489-6:2002 NUM 715 Electromagnetic compatibility (EMC) Part 2-13: Environment -
Electromagnetic compatibility and Radio spectrum Matters (ERM); High-power electromagnetic (HPEM) environments - Radiated and
ElectroMagnetic Compatibility (EMC) standard for radio equipment conducted
and services Part 6: Specific conditions for Digital Enhanced
Cordless Telecommunications (DECT) equipment SANS 61000-4-24:2006 / IEC 61000-4-24:1997 NUM 670
Electromagnetic compatibility (EMC) Part 4: Testing and
measurement techniques Section 24: Test methods for protective
33.070.40 Satellite devices for HEMP conducted disturbance - Basic EMC publication
________________________________________________________
SANS 61000-5-1:2006 / IEC 61000-5-1:1996 NUM 671
SANS 301489-20:2004 / ETSI EN 301489-20:2002 NUM 717
Electromagnetic compatibility (EMC) Part 5: Installation and
Electromagnetic compatibility and Radio spectrum Matters (ERM); mitigation guidelines Section 1: General considerations - Basic
ElectroMagnetic Compatibility (EMC) standard for radio equipment EMC publication
and services Part 20: Specific conditions for Mobile Earth Stations
(MES) used in the Mobile Satellite Services (MSS)
33.100.01 Electromagnetic compatibility in
33.070.50 Global System for Mobile general
________________________________________________________
Communication (GSM)
________________________________________________________ SANS 212:2007 / CISPR 12:2007 NUM 30
SANS 301489-8:2005 / ETSI EN 301489-8:2002 Vehicles, boats, and internal combustion engines - Radio
NUM 716
disturbance characteristics - Limits and methods of measurement
Electromagnetic compatibility and Radio spectrum Matters (ERM); for the protection of off-board receivers
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services Part 8: Specific conditions for GSM base stations SANS 216-1-1:2007 / CISPR 16-1-1:2006 NUM 31
SANS 301502:2005 / ETSI EN 301502:2001 Specification for radio disturbance and immunity measuring
NUM 718
apparatus and methods Part 1-1: Radio disturbance and immunity
Harmonized EN for Global System for Mobile communications measuring apparatus - Measuring apparatus
(GSM); Base Station and Repeater equipment covering essential
requirements under article 3.2 of the R&TTE directive (GSM 13.21 SANS 216-2-1:2006 / CISPR 16-2-1:2005 NUM 32
version 8.1.2 Release 1999)
Specification for radio disturbance and immunity measuring
SANS 301511:2005 / ETSI EN 301511:2003 apparatus and methods Part 2-1: Methods of measurement of
NUM 718
disturbances and immunity - Conducted disturbance
Global System for Mobile communications (GSM); Harmonized EN measurements
for mobile stations in the GSM 900 and GSM 1800 bands covering
essential requirements under article 3.2 of the R&TTE directive SANS 218-1:2005 / CISPR 18-1:1982 NUM 33
(1999/5/EC)
Radio interference characteristics of overhead power lines and
high-voltage equipment Part 1: Description of phenomena
33.080 Integrated Services Digital Network SANS 218-2:2005 / CISPR 18-2:1986 NUM 33
(ISDN) Radio interference characteristics of overhead power lines and
________________________________________________________ high-voltage equipment Part 2: Methods of measurement and
procedure for determining limits
SANS 300103:1990 / ETS 300103:1990 NUM 708
Integrated Services Digital Network (ISDN); Support of CCITT SANS 218-3:2005 / CISPR 18-3:1986 NUM 33
Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Radio interference characteristics of overhead power lines and
Equipments (DTEs) by an ISDN; Synchronous and asynchronous high-voltage equipment Part 3: Code of practice for minimizing the
terminal adaption functions generation of radio noise
SANS 300234:2005 / ETSI EN 300234:2001 NUM 710 SANS 222:2006 / CISPR 22:2006 NUM 33
Fixed Radio Systems; Point-to-point equipment; High capacity Information technology equipment - Radio disturbance
digital radio systems carrying 1 x STM-1 signals and operating in characteristics - Limits and methods of measurement
frequency bands with about 30 MHz channel spacing and
alternated arrangements SANS 60601-1-2:2005 / IEC 60601-1-2:2004 NUM 638
Medical electrical equipment Part 1-2: General requirements for
safety - Collateral standard: Electromagnetic compatibility -
33.100 Electromagnetic compatibility (EMC) Requirements and tests
________________________________________________________
SANS 61000-2-1:2006 / IEC 61000-2-1:1990 NUM 665 SANS 60728-2:2005 / IEC 60728-2:2002 NUM 642
Electromagnetic compatibility (EMC) Part 2: Environment Section Cabled distribution systems for television and sound signals Part 2:
1: Description of the environment - Electromagnetic environment Electromagnetic compatibility for equipment
for low-frequency conducted disturbances and signalling in public
power supply systems
SANS 61000-1-2:2003 / IEC TS 61000-1-2:2001 NUM 665 SANS 201468:2004 / ETSI ES 201468:2002 NUM 707
Electromagnetic compatibility (EMC) Part 1-2: General - Electromagnetic compatibility and Radio spectrum Matters (ERM);
Methodology for the achievement of the functional safety of Additional ElectroMagnetic Compatibility (EMC) requirements and
electrical and electronic equipment with regard to electromagnetic resistibility requirements for telecommunications equipment for
phenomena enhanced availability of service in specific applications
SANS 61000-1-5:2006 / IEC 61000-1-5:2004 NUM 665 SANS 300086-2:2005 / ETSI EN 300086-2:2001 NUM 707
Electromagnetic compatibility (EMC) Part 1-5: General - High Electromagnetic compatibility and Radio spectrum Matters (ERM);
power electromagnetic (HPEM) effects on civil systems Land Mobile Service; Radio equipment with an internal or external
RF connector intended primarily for analogue speech Part 2:
SANS 61000-2-5:1995 / IEC 61000-2-5:1995 NUM 666 Harmonized EN covering essential requirements under article 3.2
Electromagnetic compatibility (EMC) Part 2: Environment Section of the R&TTE Directive
5: Classification of electromagnetic environments - Basic EMC
publication SANS 300113-1:2005 / ETSI EN 300113-1:2003 NUM 708
Electromagnetic compatibility and Radio spectrum Matters (ERM);
SANS 61000-2-7:1998 / IEC 61000-2-7:1998 NUM 666 Land mobile service; Radio equipment intended for the
Electromagnetic compatibility (EMC) Part 2: Environment Section transmission of data (and/or speech) using constant or non-
7: Low frequency magnetic fields in various environments constant envelope modulation and having an antenna connector;
Part 1: Technical characteristics and methods of measurement
SANS 61000-2-11:2006 / IEC 61000-2-11:1999 NUM 667
SANS 300113-2:2005 / ETSI EN 300113-2:2003 NUM 708
Electromagnetic compatibility (EMC) Part 2-11: Environment -
Classification of HEMP environments Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land mobile service; Radio equipment intended for the
SANS 61000-2-13:2007 / IEC 61000-2-13:2005 NUM 667 transmission of data (and/or speech) using constant or non-
constant envelope modulation and having an antenna connector;
Electromagnetic compatibility (EMC) Part 2-13: Environment -
Part 2: Harmonized EN covering essential requirements under
High-power electromagnetic (HPEM) environments - Radiated and
article 3.2 of the R&TTE Directive
conducted
SANS 300127:1999 / EN 300127:1999 NUM 708
SANS 61000-3-5:2006 / IEC 61000-3-5:1994 NUM 668
Electromagnetic compatibility and Radio spectrum Matters (ERM) -
Electromagnetic compatibility (EMC) Part 3: Limits Section 5:
Radiated emission testing of physically large telecommunication
Limitation of voltage fluctuations and flicker in low-voltage power
systems
supply systems for equipment with rated current greater than 16 A
SANS 300220-1:2006 / ETSI EN 300220-1:2006 NUM 709
SANS 61000-4-11:2005 / IEC 61000-4-11:2004 NUM 669
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic compatibility (EMC) Part 4-11: Testing and
Short Range Devices (SRD); Radio equipment to be used in the 25
measurement techniques - Voltage dips, short interruptions and
MHz to 1 000 MHz frequency range with power levels ranging up to
voltage variations immunity tests
500 mW; Part 1: Technical characteristics and test methods
SANS 61000-5-2:1997 / IEC 61000-5-2:1997 NUM 671
SANS 300220-3:2005 / ETSI EN 300220-3:2000 NUM 709
Electromagnetic compatibility (EMC) Part 5: Installation and
Electromagnetic compatibility and Radio spectrum Matters (ERM);
mitigation guidelines Section 2: Earthing and cabling
Short Range Devices (SRD); Radio equipment to be used in the 25
SANS 61204-3:2000 / IEC 61204-3:2000 NUM 679 MHz to 1 000 MHz frequency range with power levels ranging up to
500 mW; Part 3: Harmonized EN covering essential requirements
Low-voltage power supplies, d.c. output Part 3: Electromagnetic under article 3.2 of the R&TTE Directive
compatibility (EMC)
SANS 300224-1:2005 / ETSI EN 300224-1:2001 NUM 710
SANS 61326-1:2007 / IEC 61326-1:2005 NUM 685
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electrical equipment for measurement, control and laboratory use - On-site paging service Part 1: Technical and functional
EMC requirements Part 1: General requirements characteristics, including test methods
SANS 61326-1:2000 / IEC 61326-1:2000 NUM 685 SANS 300224-2:2005 / ETSI EN 300224-2:2001 NUM 710
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility and Radio spectrum Matters (ERM);
EMC requirements On-site paging service Part 2: Harmonized EN under article 3.2 of
the R&TTE Directive
SANS 61800-3:2005 / IEC 61800-3:2004 NUM 695
Adjustable speed electrical power drive systems Part 3: EMC SANS 300296-2:2004 / ETSI EN 300296-2:2001 NUM 710
requirements and specific test methods Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land Mobile Service; Radio equipment using integral antennas
SANS 62040-2:2007 / IEC 62040-2:2005 NUM 698 intended primarily for analogue speech Part 2: Harmonized EN
Uninterruptible power systems (UPS) Part 2: Electromagnetic covering essential requirements under article 3.2 of the R&TTE
compatibility (EMC) requirements Directive
SANS 62310-2:2006 / IEC 62310-2:2006 NUM 705 SANS 300328:2007 / ETSI EN 300328:2006 NUM 710
Static transfer systems (STS) Part 2: Electromagnetic compatibility Electromagnetic compatibility and Radio spectrum Matters (ERM);
(EMC) requirements Wideband transmission systems; Data transmission equipment
operating in the 2,4 GHz ISM band and using wide band
SANS 101651:2005 / ETSI TR 101651:1999 NUM 705 modulation techniques; Harmonized EN covering essential
Electromagnetic compatibility and Radio spectrum Matters (ERM); requirements under article 3.2 of the R&TTE Directive
Classification of the electromagnetic environment conditions for
equipment in telecommunication networks
SANS 300330-1:2006 / ETSI EN 300330-1:2006 NUM 710 SANS 301489-7:2006 / ETSI EN 301489-7:2005 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment in the frequency ElectroMagnetic Compatibility (EMC) standard for radio equipment
range 9 kHz to 25 MHz and inductive loop systems in the frequency and services Part 7: Specific conditions for mobile and portable
range 9 kHz to 30 MHz; Part 1: Technical characteristics and test radio and ancillary equipment of digital cellular radio
methods telecommunications systems (GSM and DCS)
SANS 300330-2:2006 / ETSI EN 300330-2:2006 NUM 710 SANS 301489-8:2005 / ETSI EN 301489-8:2002 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment in the frequency ElectroMagnetic Compatibility (EMC) standard for radio equipment
range 9 kHz to 25 MHz and inductive loop systems in the frequency and services Part 8: Specific conditions for GSM base stations
range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of
the R&TTE Directive SANS 301489-9:2003 / ETSI EN 301489-9:2002 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM);
SANS 300339:1998 / EN 300339:1998 NUM 711 Electromagnetic compatibility (EMC) standard for radio equipment
Electromagnetic compatibility and Radio spectrum Matters (ERM) - and services Part 9: Specific conditions for wireless microphones,
General ElectroMagnetic Compatibility (EMC) for radio similar Radio Frequency (RF) audio link equipment, cordless audio
communications equipment and in-ear monitoring devices
SANS 300440-1:2006 / ETSI EN 300440-1:2001 NUM 712 SANS 301489-11:2004 / ETSI EN 301489-11:2002 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short range devices; Radio equipment to be used in the 1 GHz to ElectroMagnetic Compatibility (EMC) standard for radio equipment
40 GHz frequency range Part 1: Technical characteristics and test and services Part 11: Specific conditions for terrestrial sound
methods broadcasting service transmitters
SANS 300674-1:2006 / ETSI EN 300674-1:2004 NUM 713 SANS 301489-12:2005 / ETSI EN 301489-12:2003 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio Spectrum Matters (ERM);
Road Transport and Traffic Telematics (RTTT); Dedicated Short ElectroMagnetic compatibility (EMC) standard for radio equipment
Range Communication (DSRC) transmission equipment (500 kbit/s and services Part 12: Specific conditions for Very Small Aperture
/ 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Terminal, Satellite Interactive Earth Stations operated in the
Medical (ISM) band Part 1: General characteristics and test frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite
methods for Road Side Units (RSU) and On-Board Units (OBU) Service (FSS)
SANS 301357-1:2006 / ETSI EN 301357-1:2006 NUM 714 SANS 301489-14:2004 / ETSI EN 301489-14:2003 NUM 716
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio spectrum Matters (ERM);
Cordless audio devices in the range 25 MHz to 2 000 MHz Part 1: ElectroMagnetic Compatibility (EMC) standard for radio equipment
Technical characteristics and test methods and services Part 14: Specific conditions for analogue and digital
terrestrial TV broadcasting service transmitters
SANS 301489-1:2005 / ETSI EN 301489-1:2005 NUM 715
Electromagnetic compatibility and Radio spectrum Matters (ERM) - SANS 301489-15:2004 / ETSI EN 301489-15:2002 NUM 716
ElectroMagnetic Compatibility (EMC) standard for radio equipment Electromagnetic compatibility and Radio spectrum Matters (ERM);
and services Part 1: Common technical requirements ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services Part 15: Specific conditions for commercially available
SANS 301489-2:2005 / ETSI EN 301489-2:2002 NUM 715 amateur radio equipment
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment SANS 301489-17:2005 / ETSI EN 301489-17:2002 NUM 717
and services Part 2: Specific conditions for radio paging equipment Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
SANS 301489-3:2005 / ETSI EN 301489-3:2002 NUM 715 and services Part 17: Specific conditions for 2,4 GHz wideband
Electromagnetic compatibility and Radio spectrum Matters (ERM); transmission systems and 5 GHz high performance RLAN
ElectroMagnetic Compatibility (EMC) standard for radio equipment equipment
and services Part 3: Specific conditions for Short-Range Devices
(SRD) operating on frequencies between 9 kHz and 40 GHz SANS 301489-18:2003 / ETSI EN 301489-18:2002 NUM 717
Electromagnetic compatibility and Radio spectrum Matters (ERM);
SANS 301489-4:2005 / ETSI EN 301489-4:2002 NUM 715 ElectroMagnetic Compatibility (EMC) standard for radio equipment
Electromagnetic compatibility and Radio spectrum Matters (ERM); and services Part 18: Specific conditions for Terrestrial Trunked
ElectroMagnetic Compatibility (EMC) standard for radio equipment Radio (TETRA) equipment
and services Part 4: Specific conditions for fixed radio links and
ancillary equipment and services SANS 301489-19:2004 / ETSI EN 301489-19:2002 NUM 717
Electromagnetic compatibility and Radio spectrum Matters (ERM);
SANS 301489-5:2003 / ETSI EN 301489-5:2002 NUM 715 ElectroMagnetic Compatibility (EMC) standard for radio equipment
Electromagnetic compatibility and Radio spectrum Matters (ERM); and services Part 19: Specific conditions for Receive Only Mobile
ElectroMagnetic Compatibility (EMC) standard for radio equipment Earth Stations (ROMES) operating in the 1,5 GHz band providing
and services Part 5: Specific conditions for Private land Mobile data communications
Radio (PMR) and ancillary equipment (speech and non-speech)
SANS 301489-20:2004 / ETSI EN 301489-20:2002 NUM 717
SANS 301489-6:2005 / ETSI EN 301489-6:2002 NUM 715 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 20: Specific conditions for Mobile Earth Stations
and services Part 6: Specific conditions for Digital Enhanced (MES) used in the Mobile Satellite Services (MSS)
Cordless Telecommunications (DECT) equipment
SANS 301489-22:2005 / ETSI EN 301489-22:2003 NUM 717 SANS 301908-4:2006 / ETSI EN 301908-4:2003 NUM 719
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
and services Part 22: Specific conditions for ground based VHF 2000 Third-Generation cellular networks Part 4: Harmonized EN for
aeronautical mobile and fixed radio equipment IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive
SANS 301489-23:2005 / ETSI EN 301489-23:2002 NUM 717
Electromagnetic compatibility and Radio spectrum Matters (ERM); SANS 301908-5:2006 / ETSI EN 301908-5:2003 NUM 719
ElectroMagnetic Compatibility (EMC) standard for radio equipment Electromagnetic compatibility and Radio spectrum Matters (ERM);
and services Part 23: Specific conditions for IMT-2000 CDMA Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
Direct Spread (UTRA) Base Station (BS) radio, repeater and 2000 Third-Generation cellular networks Part 5: Harmonized EN for
ancillary equipment IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters)
covering essential requirements of article 3.2 of the R&TTE
SANS 301489-24:2006 / ETSI EN 301489-24:2005 NUM 717 Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment SANS 301908-6:2006 / ETSI EN 301908-6:2003 NUM 720
and services Part 24: Specific conditions for IMT-2000 CDMA Electromagnetic compatibility and Radio spectrum Matters (ERM);
Direct Spread (UTRA) for Mobile and portable (UE) radio and Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
ancillary equipment 2000 Third-Generation cellular networks Part 6: Harmonized EN for
IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential
SANS 301489-25:2006 / ETSI EN 301489-25:2005 NUM 718 requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment SANS 301908-7:2006 / ETSI EN 301908-7:2005 NUM 720
and services Part 25: Specific conditions for CDMA 1x spread Electromagnetic compatibility and Radio spectrum Matters (ERM);
spectrum Mobile Stations and ancillary equipment Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
2000 Third-Generation cellular networks Part 7: Harmonized EN for
SANS 301489-26:2005 / ETSI EN 301489-26:2005 NUM 718 IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential
Electromagnetic compatibility and Radio spectrum Matters (ERM); requirements of article 3.2 of the R&TTE Directive
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services Part 26: Specific conditions for CDMA 1x spread SANS 301908-8:2006 / ETSI EN 301908-8:2002 NUM 720
spectrum Base Stations, repeaters and ancillary equipment Electromagnetic compatibility and Radio spectrum Matters (ERM);
Base Stations (BS) Repeaters and User Equipment (UE) for IMT-
SANS 301797:2005 / ETSI EN 301797:2000 NUM 718 2000 Third-Generation cellular networks Part 8: Harmonized EN for
Electromagnetic compatibility and Radio Spectrum Matters (ERM); IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering
Harmonized EN for CT2 cordless telephone equipment covering essential requirements of article 3.2 of the R&TTE Directive
essential requirements under article 3.2 of the R&TTE directive
SANS 301908-9:2006 / ETSI EN 301908-9:2002 NUM 720
SANS 301843-1:2005 / ETSI EN 301843-1:2004 NUM 719 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
ElectroMagnetic Compatibility (EMC) standard for marine radio 2000 Third-Generation cellular networks Part 9: Harmonized EN for
equipment and services; Part 1: Common technical requirements IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering
essential requirements of article 3.2 of the R&TTE Directive
SANS 301843-2:2005 / ETSI EN 301843-2:2004 NUM 719
SANS 301908-10:2006 / ETSI EN 301908-10:2003 NUM 720
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for marine radio Electromagnetic compatibility and Radio spectrum Matters (ERM);
equipment and services Part 2: Specific conditions for VHF Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
radiotelephone transmitters and receivers 2000 Third-Generation cellular networks Part 10: Harmonized EN
for IMT-2000, FDMA/TDMA (DECT) covering essential
SANS 301908-1:2006 / ETSI EN 301908-1:2003 NUM 719 requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); SANS 301908-11:2006 / ETSI EN 301908-11:2004 NUM 720
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
2000 Third-Generation cellular networks Part 1: Harmonized EN for Electromagnetic compatibility and Radio spectrum Matters (ERM);
IMT-2000, introduction and common requirements, covering Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
essential requirements of article 3.2 of the R&TTE Directive 2000 Third-Generation cellular networks Part 11: Harmonized EN
for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters)
SANS 301908-2:2006 / ETSI EN 301908-2:2003 NUM 719 covering essential requirements of article 3.2 of the R&TTE
Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
2000 Third-Generation cellular networks Part 2: Harmonized EN for
IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering 33.100.10 Emission
essential requirements of article 3.2 of the R&TTE Directive ________________________________________________________
SANS 211:2004 / CISPR 11:2004 NUM 30
SANS 301908-3:2006 / ETSI EN 301908-3:2003 NUM 719
Industrial, scientific and medical (ISM) radio-frequency equipment -
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic disturbance characteristics - Limits and methods
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-
of measurement
2000 Third-Generation cellular networks Part 3: Harmonized EN for
IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering SANS 213:2006 / CISPR 13:2006 NUM 30
essential requirements of article 3.2 of the R&TTE Directive
Sound and television broadcast receivers and associated
equipment - Radio disturbance characteristics - Limits and
methods of measurement
SANS 214-1:2006 / CISPR 14-1:2005 NUM 30 SANS 61000-6-3:2007 / IEC 61000-6-3:2006 NUM 671
Electromagnetic compatibility - Requirements for household Electromagnetic compatibility (EMC) Part 6-3: Generic standards -
appliances, electric tools and similar apparatus Part 1: Emission Emission standard for residential, commercial and light-industrial
environments
SANS 215:2007 / CISPR 15:2007 NUM 31
Limits and methods of measurement of radio disturbance SANS 61000-6-4:2006 / IEC 61000-6-4:2006 NUM 672
characteristics of electrical lighting and similar equipment Electromagnetic compatibility (EMC) Part 6-4: Generic standards -
Emission standard for industrial environments
SANS 225:2005 / CISPR 25:2002 NUM 34
Radio disturbance characteristics for the protection of receivers SANS 61000-6-6:2006 / IEC 61000-6-6:2003 NUM 672
used on board vehicles, boats, and on devices - Limits and Electromagnetic compatibility (EMC) Part 6-6: Generic standards -
methods of measurement HEMP immunity for indoor equipment
SANS 61000-2-2:2002 / IEC 61000-2-2:2002 NUM 666 SANS 214-2:2003 / CISPR 14-2:2001 NUM 31
Electromagnetic compatibility (EMC) Part 2-2: Environment - Electromagnetic compatibility - Requirements for household
Compatibility levels for low-frequency conducted disturbances and appliances, electric tools and similar apparatus Part 2: Immunity -
signalling in public low-voltage power supply systems Product family standard
SANS 61000-2-4:2003 / IEC 61000-2-4:2002 NUM 666 SANS 216-1-2:2007 / CISPR 16-1-2:2006 NUM 31
Electromagnetic compatibility (EMC) Part 2-4: Environment - Specification for radio disturbance and immunity measuring
Compatibility levels in industrial plants for low-frequency conducted apparatus and methods Part 1-2: Radio disturbance and immunity
disturbances measuring apparatus - Ancillary equipment - Conducted
disturbances
SANS 61000-2-6:1995 / IEC 61000-2-6:1995 NUM 666
SANS 216-1-3:2005 / CISPR 16-1-3:2004 NUM 31
Electromagnetic compatibility (EMC) Part 2: Environment Section
6: Assessment of the emission levels in the power supply of Specification for radio disturbance and immunity measuring
industrial plants as regards low-frequency conducted disturbances apparatus and methods Part 1-3: Radio disturbance and immunity
measuring apparatus - Ancillary equipment - Disturbance power
SANS 61000-2-9:2007 / IEC 61000-2-9:1996 NUM 666
SANS 216-1-4:2007 / CISPR 16-1-4:2007 NUM 31
Electromagnetic compatibility (EMC) Part 2: Environment Section
9: Description of HEMP environment - Radiated disturbance - Basic Specification for radio disturbance and immunity measuring
EMC publication apparatus and methods Part 1-4: Radio disturbance and immunity
measuring apparatus - Ancillary equipment - Radiated disturbances
SANS 61000-2-10:2007 / IEC 61000-2-10:1998 NUM 667
SANS 216-1-5:2004 / CISPR 16-1-5:2003 NUM 31
Electromagnetic compatibility (EMC) Part 2-10: Environment -
Description of HEMP environment - Conducted disturbance Specification for radio disturbance and immunity measuring
apparatus and methods Part 1-5: Radio disturbance and immunity
SANS 61000-2-12:2005 / IEC 61000-2-12:2003 NUM 667 measuring apparatus - Antenna calibration test sites for 30 MHz to
1 000 MHz
Electromagnetic compatibility (EMC) Part 2-12: Environment -
Compatibility levels for low-frequency conducted disturbances and SANS 216-2-2:2006 / CISPR 16-2-2:2005 NUM 32
signalling in public medium-voltage power supply systems
Specification for radio disturbance and immunity measuring
SANS 61000-3-2:2006 / IEC 61000-3-2:2005 NUM 667 apparatus and methods Part 2-2: Methods of measurement of
disturbances and immunity - Measurement of disturbance power
Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for
harmonic current emissions (equipment input current <= 16 A per SANS 216-2-3:2007 / CISPR 16-2-3:2006 NUM 32
phase)
Specification for radio disturbance and immunity measuring
SANS 61000-3-4:1998 / IEC 61000-3-4:1998 NUM 667 apparatus and methods Part 2-3: Methods of measurement of
disturbances and immunity - Radiated disturbance measurements
Electromagnetic compatibility (EMC) Part 3-4: Limits - Limitation of
emission of harmonic currents in low-voltage power supply systems SANS 216-2-4:2004 / CISPR 16-2-4:2003 NUM 32
for equipment with rated current greater than 16 A
Specification for radio disturbance and immunity measuring
SANS 61000-3-11:2003 / IEC 61000-3-11:2000 NUM 668 apparatus and methods Part 2-4: Methods of measurement of
disturbances and immunity - Immunity measurements
Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation
of voltage changes, voltage fluctuations and flicker in public low- SANS 216-3:2005 / CISPR/TR 16-3:2003 NUM 32
voltage supply systems - Equipment with rated current <= 75 A and
subject to conditional connection Specification for radio disturbance and immunity measuring
apparatus and methods Part 3: CISPR technical reports
SANS 61000-4-7:2003 / IEC 61000-4-7:2002 NUM 669
SANS 216-4-1:2005 / CISPR/TR 16-4-1:2005 NUM 32
Electromagnetic compatibility (EMC) Part 4-7: Testing and
measurement techniques Section 7: General guide on harmonics Specification for radio disturbance and immunity measuring
and interharmonics measurements and instrumentation, for power apparatus and methods Part 4-1: Uncertainties, statistics and limit
supply systems and equipment connected thereto modelling - Uncertainties in standardized EMC tests
SANS 61000-4-20:2007 / IEC 61000-4-20:2007 NUM 670 SANS 216-4-2:2004 / CISPR 16-4-2:2003 NUM 32
Electromagnetic compatibility (EMC) Part 4-20: Testing and Specification for radio disturbance and immunity measuring
measurement techniques - Emission and immunity testing in apparatus and methods Part 4-2: Uncertainties, statistics and limit
transverse electromagnetic (TEM) waveguides modelling - Uncertainty in EMC measurements
SANS 216-4-3:2007 / CISPR/TR 16-4-3:2007 NUM 32 SANS 61000-4-10:2003 / IEC 61000-4-10:2001 NUM 669
Specification for radio disturbance and immunity measuring Electromagnetic compatibility (EMC) Part 4-10: Testing and
apparatus and methods Part 4-3: Uncertainties, statistics and limit measurement techniques - Damped oscillatory magnetic field
modelling - Statistical considerations in the determination of EMC immunity test
compliance of mass-produced products
SANS 61000-4-12:2007 / IEC 61000-4-12:2006 NUM 669
SANS 216-4-4:2004 / CISPR/TR 16-4-4:2003 NUM 33 Electromagnetic compatibility (EMC) Part 4-12: Testing and
Specification for radio disturbance and immunity measuring measurement techniques - Ring wave immunity test
apparatus and methods Part 4-4: Uncertainties, statistics and limit
modelling - Statistics of complaints and a model for the calculation SANS 61000-4-13:2006 / IEC 61000-4-13:2002 NUM 669
of limits Electromagnetic compatibility (EMC) Part 4-13: Testing and
measurement techniques - Harmonics and interharmonics
SANS 224:1997 / CISPR 24:1997 NUM 34 including mains signalling at a.c. power port, low frequency
Information technology equipment - Immunity characteristics - immunity tests
Limits and methods of measurement
SANS 61000-4-14:2003 / IEC 61000-4-14:2002 NUM 670
SANS 2200:2005 / CISPR 20:2005 NUM 246 Electromagnetic compatibility (EMC) Part 4-14: Testing and
Sound and television broadcast receivers and associated measurement techniques - Voltage fluctuation immunity test
equipment - Immunity characteristics - Limits and methods of
measurement SANS 61000-4-16:2005 / IEC 61000-4-16:2002 NUM 670
Electromagnetic compatibility (EMC) Part 4-16: Testing and
SANS 61000-2-11:2006 / IEC 61000-2-11:1999 NUM 667 measurement techniques - Test for immunity to conducted,
Electromagnetic compatibility (EMC) Part 2-11: Environment - common mode disturbances in the frequency range 0 Hz to 150
Classification of HEMP environments kHz
SANS 61000-3-3:2006 / IEC 61000-3-3:2005 NUM 667 SANS 61000-4-17:2003 / IEC 61000-4-17:2002 NUM 670
Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of Electromagnetic compatibility (EMC) Part 4-17: Testing and
voltage changes, voltage fluctuations and flicker in public low- measurement techniques - Ripple on d.c. input power port
voltage supply systems, for equipment with rated current <= 16 A immunity test
per phase and not subject to conditional connection
SANS 61000-4-20:2007 / IEC 61000-4-20:2007 NUM 670
SANS 61000-4-1:2007 / IEC 61000-4-1:2006 NUM 668 Electromagnetic compatibility (EMC) Part 4-20: Testing and
Electromagnetic compatibility (EMC) Part 4-1: Testing and measurement techniques - Emission and immunity testing in
measurement techniques - Overview of IEC 61000-4 series transverse electromagnetic (TEM) waveguides
SANS 61000-4-2:2001 / IEC 61000-4-2:2001 NUM 668 SANS 61000-4-24:2006 / IEC 61000-4-24:1997 NUM 670
Electromagnetic compatibility (EMC) Part 4-2: Testing and Electromagnetic compatibility (EMC) Part 4: Testing and
measurement techniques - Electrostatic discharge immunity test measurement techniques Section 24: Test methods for protective
devices for HEMP conducted disturbance - Basic EMC publication
SANS 61000-4-3:2006 / IEC 61000-4-3:2006 NUM 668
Electromagnetic compatibility (EMC) Part 4-3: Testing and SANS 61000-4-25:2006 / IEC 61000-4-25:2001 NUM 670
measurement techniques - Radiated, radio-frequency, Electromagnetic compatibility (EMC) Part 4-25: Testing and
electromagnetic field immunity test measurement techniques - HEMP immunity test methods for
equipment and systems
SANS 61000-4-4:2004 / IEC 61000-4-4:2004 NUM 668
Electromagnetic compatibility (EMC) Part 4-4: Testing and SANS 61000-4-27:2005 / IEC 61000-4-27:2000 NUM 670
measurement techniques - Electrical fast transient/burst immunity Electromagnetic compatibility (EMC) Part 4-27: Testing and
test measurement techniques - Unbalance, immunity test
SANS 61000-4-5:2006 / IEC 61000-4-5:2005 NUM 668 SANS 61000-4-28:2005 / IEC 61000-4-28:2002 NUM 671
Electromagnetic compatibility (EMC) Part 4-5: Testing and Electromagnetic compatibility (EMC) Part 4-28: Testing and
measurement techniques - Surge immunity test measurement techniques - Variation of power frequency, immunity
test
SANS 61000-4-6:2006 / IEC 61000-4-6:2006 NUM 669
Electromagnetic compatibility (EMC) Part 4-6: Testing and SANS 61000-4-29:2005 / IEC 61000-4-29:2000 NUM 671
measurement techniques - Immunity to conducted disturbances, Electromagnetic compatibility (EMC) Part 4-29: Testing and
induced by radio-frequency fields measurement techniques - Voltage dips, short interruptions and
voltage variations on d.c. input power port immunity tests
SANS 61000-4-7:2003 / IEC 61000-4-7:2002 NUM 669
Electromagnetic compatibility (EMC) Part 4-7: Testing and SANS 61000-6-1:2005 / IEC 61000-6-1:2005 NUM 671
measurement techniques Section 7: General guide on harmonics Electromagnetic compatibility (EMC) Part 6-1: Generic standards -
and interharmonics measurements and instrumentation, for power Immunity for residential, commercial and light-industrial
supply systems and equipment connected thereto environments
SANS 61000-4-8:2003 / IEC 61000-4-8:2001 NUM 669 SANS 61000-6-2:2005 / IEC 61000-6-2:2005 NUM 671
Electromagnetic compatibility (EMC) Part 4-8: Testing and Electromagnetic compatibility (EMC) Part 6-2: Generic standards -
measurement techniques - Power frequency magnetic field Immunity for industrial environments
immunity test
SANS 61000-6-6:2006 / IEC 61000-6-6:2003 NUM 672
SANS 61000-4-9:2003 / IEC 61000-4-9:2001 NUM 669 Electromagnetic compatibility (EMC) Part 6-6: Generic standards -
Electromagnetic compatibility (EMC) Part 4-9: Testing and HEMP immunity for indoor equipment
measurement techniques - Pulse magnetic field immunity test
SANS 61547:1995 / IEC 61547:1995 NUM 690 SANS 101952-1-5:2006 / ETSI TS 101952-1-5:2003 NUM 706
Equipment for general lighting purposes - EMC immunity Access network xDSL transmission filters Part 1: ADSL splitters for
requirements European deployment Sub-part 5: Specification for ADSL over
POTS distributed filters
SANS 300386:2006 / ETSI EN 300386:2005 NUM 711
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Telecommunication network equipment; ElectroMagnetic 33.120.20 Wires and symmetrical cables
Compatibility (EMC) requirements ________________________________________________________
SANS 1574-1:2007 NUM 181
33.100.99 Other aspects related to EMC Electric flexible cores, cords and cables with solid extruded
________________________________________________________ dielectric insulation Part 1: General
SANS 221:1999 / CISPR 21:1999 NUM 33 SANS 1574-3:2007 NUM 181
Interference to mobile radiocommunications in the presence of Electric flexible cores, cords and cables with solid extruded
impulsive noise - Methods of judging degradation and measures to dielectric insulation Part 3: PVC-insulated cores and cables
improve performance
SANS 1574-4:2007 NUM 181
SANS 61000-1-3:2006 / IEC/TR 61000-1-3:2002 NUM 665 Electric flexible cores, cords and cables with solid extruded
Electromagnetic compatibility (EMC) Part 1-3: General - The dielectric insulation Part 4: Rubber-insulated cores and cords
effects of high-altitude EMP (HEMP) on civil equipment and
systems SANS 1574-5:2007 NUM 181
Electric flexible cores, cords and cables with solid extruded
SANS 61000-4-25:2006 / IEC 61000-4-25:2001 NUM 670 dielectric insulation Part 5: Rubber-insulated cores and cables
Electromagnetic compatibility (EMC) Part 4-25: Testing and
measurement techniques - HEMP immunity test methods for SANS 61156-1:2007 / IEC 61156-1:2007 NUM 678
equipment and systems Multicore and symmetrical pair/quad cables for digital
communications Part 1: General specification
SANS 61000-4-30:2003 / IEC 61000-4-30:2003 NUM 671
Electromagnetic compatibility (EMC) Part 4-30: Testing and
measurement techniques - Power quality measurement methods 33.120.40 Aerials
________________________________________________________
SANS 10222-5-2:2007 NUM 462 SANS 60793-1-33:2001 / IEC 60793-1-33:2001 NUM 648
Electrical security installations Part 5-2: CCTV installations - Optical fibres Part 1-33: Measurement methods and test
Application guidelines procedures - Stress corrosion susceptibility
SANS 61280-1-3:1998 / IEC 61280-1-3:1998 NUM 682 SANS 60332-2-1:2005 / IEC 60332-2-1:2004 NUM 614
Fibre optic communication subsystem basic test procedures Part 1- Tests on electric and optical fibre cables under fire conditions Part
3: Test procedures for general communication subsystems - 2-1: Test for vertical flame propagation for a single small insulated
Central wavelength and spectral width measurement wire or cable - Apparatus
SANS 61280-2-1:1998 / IEC 61280-2-1:1998 NUM 682 SANS 60332-2-2:2005 / IEC 60332-2-2:2004 NUM 614
Fibre optic communication subsystem basic test procedures Part 2- Tests on electric and optical fibre cables under fire conditions Part
1: Test procedures for digital systems - Receiver sensitivity and 2-2: Test for vertical flame propagation for a single small insulated
overload measurement wire or cable - Procedure for diffusion flame
SANS 61280-2-2:2006 / IEC 61280-2-2:2005 NUM 682 SANS 60793-1-1:2003 / IEC 60793-1-1:2002 NUM 647
Fibre optic communication subsystem test procedures Part 2-2: Optical fibres Part 1-1: Measurement methods and test procedures
Digital systems - Optical eye pattern, waveform and extinction ratio - General and guidance
measurement
SANS 60793-1-20:2002 / IEC 60793-1-20:2001 NUM 648
SANS 61281-1:1999 / IEC 61281-1:1999 NUM 683 Optical fibres Part 1-20: Measurement methods and test
Fibre optic communication subsystems Part 1: Generic procedures - Fibre geometry
specification
SANS 60793-1-30:2001 / IEC 60793-1-30:2001 NUM 648
SANS 61282-1:2000 / IEC/TR 61282-1:2000 NUM 683 Optical fibres Part 1-30: Measurement methods and test
Fibre optic communication system design guides Part 1: Single- procedures - Fibre proof test
mode digital and analogue systems
SANS 60793-1-31:2001 / IEC 60793-1-31:2001 NUM 648
SANS 61282-3:2007 / IEC TR 61282-3:2006 NUM 683 Optical fibres Part 1-31: Measurement methods and test
Fibre optic communication system design guides Part 3: procedures - Tensile strength
Calculation of link polarization mode dispersion
SANS 60793-1-32:2001 / IEC 60793-1-32:2001 NUM 648
SANS 61282-5:2003 / IEC/TR 61282-5:2002 NUM 683 Optical fibres Part 1-32: Measurement methods and test
Fibre optic communication system design guides Part 5: procedures - Coating strippability
Accommodation and compensation of dispersion
SANS 60793-1-34:2006 / IEC 60793-1-34:2006 NUM 649
SANS 61315:2006 / IEC 61315:2005 NUM 684 Optical fibres Part 1-34: Measurement methods and test
Calibration of fibre-optic power meters procedures - Fibre curl
SANS 61930:2004 / IEC/TR 61930:1998 NUM 696 SANS 60793-1-41:2006 / IEC 60793-1-41:2003 NUM 649
Fibre optic graphical symbology Optical fibres Part 1-41: Measurement methods and test
procedures - Bandwidth
SANS 61931:2004 / IEC/TR 61931:1998 NUM 696 SANS 60793-1-42:2001 / IEC 60793-1-42:2001 NUM 649
Fibre optic - Terminology Optical fibres Part 1-42: Measurement methods and test
procedures - Chromatic dispersion
SANS 62221:2002 / IEC/TR 62221:2001 NUM 702
SANS 60793-1-43:2001 / IEC 60793-1-43:2001 NUM 649
Optical fibres - Measurement methods - Microbending sensitivity
Optical fibres Part 1-43: Measurement methods and test
procedures - Numerical aperture
33.180.10 Fibres and cables SANS 60793-1-44:2001 / IEC 60793-1-44:2001 NUM 649
________________________________________________________ Optical fibres Part 1-44: Measurement methods and test
procedures - Cut-off wavelength
SANS 10340-2:2006 NUM 479
Installation of telecommunication cables Part 2: Outdoor fibre optic SANS 60793-1-45:2001 / IEC 60793-1-45:2001 NUM 649
cables Optical fibres Part 1-45: Measurement methods and test
procedures - Mode field diameter
SANS 60332-1-1:2005 / IEC 60332-1-1:2004 NUM 614
Tests on electric and optical fibre cables under fire conditions Part SANS 60793-1-46:2001 / IEC 60793-1-46:2001 NUM 649
1-1: Test for vertical flame propagation for a single insulated wire or Optical fibres Part 1-46: Measurement methods and test
cable - Apparatus procedures - Monitoring of changes in optical transmittance
SANS 60332-1-2:2005 / IEC 60332-1-2:2004 NUM 614 SANS 60793-1-47:2007 / IEC 60793-1-47:2006 NUM 650
Tests on electric and optical fibre cables under fire conditions Part Optical fibres Part 1-47: Measurement methods and test
1-2: Test for vertical flame propagation for a single insulated wire or procedures - Macrobending loss
cable - Procedure for 1 kW pre-mixed flame
SANS 60793-1-48:2007 / IEC 60793-1-48:2007 NUM 650
SANS 60332-1-3:2005 / IEC 60332-1-3:2004 NUM 614
Optical fibres Part 1-48: Measurement methods and test
Tests on electric and optical fibre cables under fire conditions Part procedures - Polarization mode dispersion
1-3: Test for vertical flame propagation for a single insulated wire or
cable - Procedure for determination of flaming droplets/particles SANS 60793-1-49:2006 / IEC 60793-1-49:2006 NUM 650
Optical fibres Part 1-49: Measurement methods and test
procedures - Differential mode delay
Standards South Africa Catalogue
LST - 118
LIST OF STANDARDS CLASSIFIED BY SUBJECT
SANS 60793-1-50:2001 / IEC 60793-1-50:2001 NUM 650 SANS 60794-2-31:2006 / IEC 60794-2-31:2005 NUM 652
Optical fibres Part 1-50: Measurement methods and test Optical fibre cables Part 2-31: Indoor cables - Detailed specification
procedures - Damp heat (steady state) for optical fibre ribbon cables for use in premises cabling
SANS 60793-1-51:2001 / IEC 60793-1-51:2001 NUM 650 SANS 60794-2-40:2006 / IEC 60794-2-40:2003 NUM 652
Optical fibres Part 1-51: Measurement methods and test Optical fibre cables Part 2-40: Indoor cables - Family specification
procedures - Dry heat for simplex and duplex cables with buffered A4 fibres
SANS 60793-1-52:2001 / IEC 60793-1-52:2001 NUM 650 SANS 60794-2:2003 / IEC 60794-2:2002 NUM 652
Optical fibres Part 1-52: Measurement methods and test Optical fibre cables Part 2: Indoor cables - Sectional specification
procedures - Change of temperature
SANS 60793-1-53:2001 / IEC 60793-1-53:2001 SANS 60794-3:2001 / IEC 60794-3:2001 NUM 652
NUM 650
Optical fibres Part 1-53: Measurement methods and test Optical fibre cables Part 3: Sectional specification - Outdoor cables
procedures - Water immersion
SANS 60794-3-10:2003 / IEC 60794-3-10:2002 NUM 652
SANS 60793-1-54:2004 / IEC 60793-1-54:2003 NUM 650
Optical fibre cables Part 3-10: Outdoor cables - Family
Optical fibres Part 1-54: Measurement methods and test specification for duct and directly buried optical telecommunication
procedures - Gamma irradiation cables
SANS 60793-2:2004 / IEC 60793-2:2003 NUM 651 SANS 60794-3-12:2006 / IEC 60794-3-12:2005 NUM 653
Optical fibres Part 2: Product specifications - General Optical fibre cables Part 3-12: Outdoor cables - Detailed
specification for duct and directly buried optical telecommunication
SANS 60793-2-10:2005 / IEC 60793-2-10:2004 NUM 651 cables for use in premises cabling
Optical fibres Part 2-10: Product specifications - Sectional SANS 60794-3-20:2003 / IEC 60794-3-20:2002 NUM 653
specification for category A1 multimode fibres
Optical fibre cables Part 3-20: Outdoor cables - Family
SANS 60793-2-20:2002 / IEC 60793-2-20:2001 NUM 651 specification for optical self-supporting aerial telecommunication
cables
Optical fibres Part 2-20: Product specifications - Sectional
specification for category A2 multimode fibres SANS 60794-3-21:2006 / IEC 60794-3-21:2005 NUM 653
SANS 60793-2-30:2002 / IEC 60793-2-30:2002 NUM 651 Optical fibre cables Part 3-21: Outdoor cables - Detailed
specification for optical self-supporting aerial telecommunication
Optical fibres Part 2-30: Product specifications - Sectional cables for use in premises cabling
specification for category A3 multimode fibres
SANS 60794-4:2004 / IEC 60794-4:2003 NUM 653
SANS 60793-2-40:2006 / IEC 60793-2-40:2006 NUM 651
Optical fibre cables Part 4: Sectional specification - Aerial optical
Optical fibres Part 2-40: Product specifications - Sectional cables along electrical power lines
specification for category A4 multimode fibres
SANS 60794-5:2007 / IEC 60794-5:2006 NUM 653
SANS 60793-2-50:2005 / IEC 60793-2-50:2004 NUM 651
Optical fibre cables Part 5: Sectional specification - Microduct
Optical fibres Part 2-50: Product specifications - Sectional cabling for installation by blowing
specification for class B single-mode fibres
SANS 62033:2000 / IEC/TS 62033:2000 NUM 697
SANS 60794-1-1:2001 / IEC 60794-1-1:2001 NUM 651
Attenuation uniformity in optical fibres
Optical fibre cables Part 1-1: Generic specification - General
SANS 60794-2-30:2006 / IEC 60794-2-30:2003 NUM 652 33.180.20 Fibre optic interconnecting devices
Optical fibre cables Part 2-30: Indoor cables - Family specification ________________________________________________________
for optical fibre ribbon cables SANS 60869-1:1999 / IEC 60869-1:1999 NUM 657
Fibre optic attenuators Part 1: Generic specification
SANS 60874-1:2007 / IEC 60874-1:2006 NUM 657 SANS 62005-1:2002 / IEC 62005-1:2001 NUM 697
Connectors for optical fibres and cables Part 1: Generic Reliability of fibre optic interconnecting devices and passive
specification components Part 1: Introductory guide and definitions
SANS 60874-1-1:2007 / IEC 60874-1-1:2006 NUM 657 SANS 62099:2002 / IEC 62099:2001 NUM 700
Connectors for optical fibres and cables Part 1-1: Blank detail Fibre optic wavelength switches - Generic specification
specification
SANS 61073-1:1999 / IEC 61073-1:1999 NUM 677 SANS 61291-2:2007 / IEC 61291-2:2007 NUM 684
Mechanical splices and fusion splice protectors for optical fibres Optical amplifiers Part 2: Digital applications - Performance
and cables Part 1: Generic specification specification template
SANS 61300-2-40:2000 / IEC 61300-2-40:2000 NUM 684
Fibre optic interconnecting devices and passive components - 33.200 Telecontrol. Telemetering
Basic test and measurement procedures Part 2-40: Tests - Screen ________________________________________________________
testing of attenuation of single-mode tuned angled optical
connectors SANS 60864-1:1986 / IEC 60864-1:1986 NUM 657
Standardization of interconnections between broadcasting
SANS 61300-3-6:2004 / IEC 61300-3-6:2003 NUM 684 transmitters or transmitter systems and supervisory equipment Part
Fibre optic interconnecting devices and passive components - 1: Interface standards for systems using dedicated
Basic test and measurement procedures Part 3-6: Examinations interconnections
and measurements - Return loss
SANS 60864-2:1997 / IEC 60864-2:1997 NUM 657
SANS 61300-3-34:2002 / IEC 61300-3-34:2001 NUM 684 Standardization of interconnections between broadcasting
Fibre optic interconnecting devices and passive components - transmitters or transmitter systems and supervisory equipment Part
Basic test and measurement procedures Part 3-34: Examinations 2: Interface standards for systems using data bus type
and measurements - Attenuation of random mated connectors interconnections
SANS 61300-3-39:1997 / IEC 61300-3-39:1997 NUM 684 NRS 037-1:2006 NUM 759
Fibre optic interconnecting devices and passive components - Telecontrol protocol Part 1: Telecontrol protocol for stand-alone
Basic test and measurement procedures Part 3-39: Examinations remote terminal units
and measurements - PC optical connector reference plug selection
NRS 037-3:2005 NUM 759
SANS 61746:2005 / IEC 61746:2005 NUM 694 Telecontrol protocol Part 3: Intercontrol centre communications
Calibration of optical time-domain reflectometers (OTDR) protocol
SANS 20000-1:2006 / ISO/IEC 20000-1:2005 NUM 550 SANS 9797-2:2003 / ISO/IEC 9797-2:2002 NUM 401
Information technology - Service management Part 1: Specification Information technology - Security techniques - Message
Authentication Codes (MACs) Part 2: Mechanisms using a
dedicated hash-function
SANS 20000-2:2006 / ISO/IEC 20000-2:2005 NUM 551
Information technology - Service management Part 2: Code of SANS 9798-1:2003 / ISO/IEC 9798-1:1997 NUM 401
practice Information technology - Security techniques - Entity authentication
Part 1: General
SANS 60950-1:2003 / IEC 60950-1:2001 NUM 664
Information technology equipment - Safety Part 1: General SANS 9798-2:2003 / ISO/IEC 9798-2:1999 NUM 401
requirements Information technology - Security techniques - Entity authentication
Part 2: Mechanisms using symmetric encipherment algorithms
SANS 62151:2003 / IEC 62151:2000 NUM 701
Safety of equipment electrically connected to a telecommunication SANS 9798-3:2003 / ISO/IEC 9798-3:1998 NUM 401
network Information technology - Security techniques - Entity authentication
Part 3: Mechanisms using digital signature techniques
ARP 4360:2003 / AS/NZS 4360:1999 NUM 725
Guidelines for information security risk management SANS 9798-4:2003 / ISO/IEC 9798-4:1999 NUM 401
Information technology - Security techniques - Entity authentication
Part 4: Mechanisms using a cryptographic check function
35.040 Character sets and information
SANS 9798-5:2006 / ISO/IEC 9798-5:2004 NUM 401
coding
Information technology - Security techniques - Entity authentication
________________________________________________________
Part 5: Mechanisms using zero-knowledge techniques
SANS 16:2003 / ISO/IEC 10116:1997 NUM 2
SANS 9798-6:2007 / ISO/IEC 9798-6:2005 NUM 402
Information technology - Security techniques - Modes of operation
for an n-bit block cipher Information technology - Security techniques - Entity authentication
Part 6: Mechanisms using manual data transfer
SANS 18-1:2003 / ISO/IEC 10118-1:2000 NUM 2
SANS 11770-1:2004 / ISO/IEC 11770-1:1996 NUM 500
Information technology - Security techniques - Hash-functions Part
1: General Information technology - Security techniques - Key management
Part 1: Framework
SANS 18-2:2003 / ISO/IEC 10118-2:2000 NUM 2
SANS 11770-2:2004 / ISO/IEC 11770-2:1996 NUM 500
Information technology - Security techniques - Hash-functions Part
2: Hash-functions using an n-bit block cipher Information technology - Security techniques - Key management
Part 2: Mechanisms using symmetric techniques
SANS 18-3:2007 / ISO/IEC 10118-3:2004 NUM 2
SANS 11770-3:2004 / ISO/IEC 11770-3:1999 NUM 500
Information technology - Security techniques - Hash-functions Part
3: Dedicated hash-functions Information technology - Security techniques - Key management
Part 3: Mechanisms using asymmetric techniques
SANS 18-4:2003 / ISO/IEC 10118-4:1998 NUM 2
SANS 11770-4:2007 / ISO/IEC 11770-4:2006 NUM 500
Information technology - Security techniques - Hash-functions Part
4: Hash-functions using modular arithmetic Information technology - Security techniques - Key management
Part 4: Mechanisms based on weak secrets
SANS 1621-0:1997 NUM 186
SANS 13335-1:2005 / ISO/IEC 13335-1:2004 NUM 511
Messages for electronic data interchange (EDI) Part 0: General
information Information technology - Security techniques - Management of
information and communications technology security Part 1:
SANS 1646:1995 NUM 189 Concepts and models for information and communications
technology security management
South African Standard Message (ZASM)
SANS 13335-3:2002 / ISO/IEC TR 13335-3:1998 NUM 511
SANS 8601:2003 / ISO 8601:2000 NUM 389 Information technology - Guidelines for the management of IT
Data elements and interchange formats - Information interchange - security Part 3: Techniques for the management of IT Security
Representation of dates and times
SANS 13335-4:2002 / ISO/IEC TR 13335-4:2000 NUM 511
SANS 9796-2:2007 / ISO/IEC 9796-2:2002 NUM 401 Information technology - Guidelines for the management of IT
Information technology - Security techniques - Digital signature security Part 4: Selection of safeguards
schemes giving message recovery Part 2: Integer factorization
based mechanisms SANS 13335-5:2002 / ISO/IEC TR 13335-5:2001 NUM 511
Information technology - Guidelines for the management of IT
SANS 9796-3:2007 / ISO/IEC 9796-3:2006 NUM 401 security Part 5: Management guidance on network security
Information technology - Security techniques - Digital signature
schemes giving message recovery Part 3: Discrete logarithm SANS 13818-1:2004 / ISO/IEC 13818-1:2000 NUM 513
based mechanisms Information technology - Generic coding of moving pictures and
associated audio information: Systems
SANS 9797-1:2003 / ISO/IEC 9797-1:1999 NUM 401
Information technology - Security techniques - Message SANS 13818-2:2003 / ISO/IEC 13818-2:2000 NUM 513
Authentication Codes (MACs) Part 1: Mechanisms using a block Information technology - Generic coding of moving pictures and
cipher associated audio information: Video
SANS 13818-3:1998 / ISO/IEC 13818-3:1998 NUM 513 SANS 15426-1:2005 / ISO/IEC 15426-1:2000 NUM 528
Information technology - Generic coding of moving pictures and Information technology - Automatic identification and data capture
associated audio information Part 3: Audio techniques - Bar code verifier conformance specifications Part 1:
Linear symbols
SANS 13888-1:2005 / ISO/IEC 13888-1:2004 NUM 514
IT security techniques - Non-repudiation Part 1: General SANS 15443-1:2006 / ISO/IEC TR 15443-1:2005 NUM 529
Information technology - Security techniques - A framework for IT
security assurance Part 1: Overview and framework
SANS 13888-2:2004 / ISO/IEC 13888-2:1998 NUM 514
Information technology - Security techniques - Non-repudiation Part SANS 15443-2:2006 / ISO/IEC TR 15443-2:2005 NUM 529
2: Mechanisms using symmetric techniques Information technology - Security techniques - A framework for IT
security assurance Part 2: Assurance methods
SANS 13888-3:2004 / ISO/IEC 13888-3:1997 NUM 514
Information technology - Security techniques - Non-repudiation Part SANS 15446:2005 / ISO/IEC TR 15446:2004 NUM 529
3: Mechanisms using asymmetric techniques Information technology - Security techniques - Guide for the
production of Protection Profiles and Security Targets
SANS 14516:2003 / ISO/IEC TR 14516:2002 NUM 521
Information technology - Security techniques - Guidelines for the SANS 15816:2006 / ISO/IEC 15816:2002 NUM 533
use and management of Trusted Third Party services Information technology - Security techniques - Security information
objects for access control
SANS 14888-1:2003 / ISO/IEC 14888-1:1998 NUM 525
Information technology - Security techniques - Digital signatures SANS 15945:2002 / ISO/IEC 15945:2002 NUM 536
with appendix Part 1: General Information technology - Security techniques - Specification of TTP
services to support the application of digital signatures
SANS 14888-2:2003 / ISO/IEC 14888-2:1999 NUM 525
Information technology - Security techniques - Digital signatures SANS 15946-1:2007 / ISO/IEC 15946-1:2002 NUM 536
with appendix Part 2: Identity-based mechanisms Information technology - Security techniques - Cryptographic
techniques based on elliptic curves Part 1: General
SANS 14888-3:2007 / ISO/IEC 14888-3:2006 NUM 525
Information technology - Security techniques - Digital signatures SANS 15946-2:2007 / ISO/IEC 15946-2:2002 NUM 536
with appendix Part 3: Discrete logarithm based mechanisms Information technology - Security techniques - Cryptographic
techniques based on elliptic curves Part 2: Digital signatures
SANS 15408-1:2007 / ISO/IEC 15408-1:2005 NUM 527
Information technology - Security techniques - Evaluation criteria SANS 15946-3:2007 / ISO/IEC 15946-3:2002 NUM 536
for IT security Part 1: Introduction and general model Information technology - Security techniques - Cryptographic
techniques based on elliptic curves Part 3: Key establishment
SANS 15408-2:2007 / ISO/IEC 15408-2:2005 NUM 527
Information technology - Security techniques - Evaluation criteria SANS 15946-4:2007 / ISO/IEC 15946-4:2004 NUM 537
for IT security Part 2: Security functional requirements Information technology - Security techniques - Cryptographic
techniques based on elliptic curves Part 4: Digital signatures giving
SANS 15408-3:2007 / ISO/IEC 15408-3:2005 NUM 527
message recovery
Information technology - Security techniques - Evaluation criteria
for IT security Part 3: Security assurance requirements SANS 15947:2003 / ISO/IEC TR 15947:2002 NUM 537
Information technology - Security techniques - IT intrusion
SANS 15416:2005 / ISO/IEC 15416:2000 NUM 528
detection framework
Information technology - Automatic identification and data capture
techniques - Bar code print quality test specification - Linear SANS 16390:1999 / ISO/IEC 16390:1999 NUM 538
symbols Information technology - Automatic identification and data capture
techniques - Bar code symbology specifications - Interleaved 2 of 5
SANS 15417:2005 / ISO/IEC 15417:2000 NUM 528
Information technology - Automatic identification and data capture SANS 17799:2005 / ISO/IEC 17799:2005 NUM 540
techniques - Bar code symbology specification - Code 128 Information technology - Security techniques - Code of practice for
information security management
SANS 15418:1999 / ISO/IEC 15418:1999 NUM 528
Information technology - EAN/UCC Application Identifiers and Fact SANS 18000-1:2006 / ISO/IEC 18000-1:2004 NUM 540
Data Identifiers and Maintenance Information technology - Radio frequency identification for item
management Part 1: Reference architecture and definition of
SANS 15420:2005 / ISO/IEC 15420:2000 NUM 528
parameters to be standardized
Information technology - Automatic identification and data capture
techniques - Bar code symbology specification - EAN/UPC SANS 18000-2:2006 / ISO/IEC 18000-2:2004 NUM 541
Information technology - Radio frequency identification for item
SANS 15421:2005 / ISO/IEC 15421:2000 NUM 528
management Part 2: Parameters for air interface communications
Information technology - Automatic identification and data capture below 135 kHz
techniques - Bar code master test specifications
SANS 18000-3:2006 / ISO/IEC 18000-3:2004 NUM 541
SANS 15424:2005 / ISO/IEC 15424:2000 NUM 528
Information technology - Radio frequency identification for item
Information technology - Automatic identification and data capture management Part 3: Parameters for air interface communications
techniques - Data Carrier Identifiers (including Symbology at 13,56 MHz
Identifiers)
SANS 18000-4:2006 / ISO/IEC 18000-4:2004 NUM 541
Information technology - Radio frequency identification for item
management Part 4: Parameters for air interface communications
at 2,45 GHz
SANS 18000-6:2006 / ISO/IEC 18000-6:2004 NUM 541 SANS 19794-6:2007 / ISO/IEC 19794-6:2005 NUM 550
Information technology - Radio frequency identification for item Information technology - Biometric data interchange formats Part 6:
management Part 6: Parameters for air interface communications Iris image data
at 860 MHz to 960 MHz
SANS 19795-1:2007 / ISO/IEC 19795-1:2006 NUM 550
SANS 18014-1:2004 / ISO/IEC 18014-1:2002 NUM 541 Information technology - Biometric performance testing and
Information technology - Security techniques - Time stamping reporting Part 1: Principles and framework
services Part 1: Framework
SANS 19795-2:2007 / ISO/IEC 19795-2:2007 NUM 550
SANS 18014-2:2004 / ISO/IEC 18014-2:2002 NUM 542 Information technology - Biometric performance testing and
Information technology - Security techniques - Time stamping reporting Part 2: Testing methodologies for technology and
services Part 2: Mechanisms producing independent tokens scenario evaluation
SANS 18014-3:2004 / ISO/IEC 18014-3:2004 NUM 542 SANS 21827:2005 / ISO/IEC 21827:2002 NUM 564
Information technology - Security techniques - Time-stamping Information technology - Systems security engineering - Capability
services Part 3: Mechanisms producing linked tokens Maturity Model (SSE-CMM)
SANS 18031:2007 / ISO/IEC 18031:2005 NUM 542 SANS 24709-1:2007 / ISO/IEC 24709-1:2007 NUM 565
Information technology - Security techniques - Random bit Information technology - Conformance testing for the biometric
generation application programming interface (BioAPI) Part 1: Methods and
procedures
SANS 18032:2007 / ISO/IEC 18032:2005 NUM 542
Information technology - Security techniques - Prime number SANS 24709-2:2007 / ISO/IEC 24709-2:2007 NUM 566
generation Information technology - Conformance testing for the biometric
application programming interface (BioAPI) Part 2: Test assertions
SANS 18033-1:2007 / ISO/IEC 18033-1:2005 NUM 542 for biometric service providers
Information technology - Security techniques - Encryption
algorithms Part 1: General SANS 27001:2006 / ISO/IEC 27001:2005 NUM 566
Information technology - Security techniques - Information security
SANS 18033-2:2007 / ISO/IEC 18033-2:2006 NUM 542 management systems - Requirements
Information technology - Security techniques - Encryption
algorithms Part 2: Asymmetric ciphers ARP 041:1997 NUM 722
Barcoding for South African steel industry products
SANS 18033-3:2007 / ISO/IEC 18033-3:2005 NUM 542
Information technology - Security techniques - Encryption ARP 044:1997 NUM 722
algorithms Part 3: Block ciphers
SABS Model electronic data interchange (EDI) agreement
SANS 18033-4:2007 / ISO/IEC 18033-4:2005 NUM 542
Information technology - Security techniques - Encryption
algorithms Part 4: Stream ciphers 35.080 Software
________________________________________________________
SANS 18045:2007 / ISO/IEC 18045:2005 NUM 543
Information technology - Security techniques - Methodology for IT SANS 6592:2003 / ISO/IEC 6592:2000 NUM 367
security evaluation Information Technology - Guidelines for the documentation of
computer-based application systems
SANS 19784-1:2007 / ISO/IEC 19784-1:2006 NUM 548
Information technology - Biometric application programming SANS 9126-1:2003 / ISO/IEC 9126-1:2001 NUM 394
interface Part 1: BioAPI specification Software engineering - Product quality Part 1: Quality model
SANS 19791:2007 / ISO/IEC TR 19791:2006 NUM 549 SANS 9126-3:2004 / ISO/IEC TR 9126-3:2003 NUM 394
Information technology - Security techniques - Security Software engineering - Product quality Part 3: Internal metrics
assessment of operational systems
SANS 19794-1:2007 / ISO/IEC 19794-1:2006 NUM 549 SANS 9126-4:2004 / ISO/IEC TR 9126-4:2004 NUM 394
Information technology - Biometric data interchange formats Part 1: Software engineering - Product quality Part 4: Quality in use
Framework metrics
SANS 19794-2:2007 / ISO/IEC 19794-2:2005 NUM 549 SANS 9127:1988 / ISO 9127:1988 NUM 395
Information technology - Biometric data interchange formats Part 2: Information processing systems - User documentation and cover
Finger minutiae data information for consumer software packages
SANS 19794-4:2007 / ISO/IEC 19794-4:2005 NUM 549 SANS 9294:1990 / ISO/IEC TR 9294:1990 NUM 396
Information technology - Biometric data interchange formats Part 4: Information technology - Guidelines for the management of
Finger image data software documentation
SANS 19794-5:2007 / ISO/IEC 19794-5:2005 NUM 549 SANS 12119:1994 / ISO/IEC 12119:1994 NUM 503
Information technology - Biometric data interchange formats Part 5: Information technology - Software packages - Quality requirements
Face image data and testing
SANS 12207:1995 / ISO/IEC 12207:1995 NUM 504 SANS 15271:1998 / ISO/IEC TR 15271:1998 NUM 527
Information technology - Software life cycle processes Information technology - Guide for ISO/IEC 12207 (Software Life
Cycle Processes)
SANS 14102:1995 / ISO/IEC 14102:1995 NUM 519 SANS 15288:2003 / ISO/IEC 15288:2002 NUM 527
Information technology - Guideline for the evaluation and selection Systems engineering - Systems life cycle processes
of CASE tools
SANS 14143-1:1998 / ISO/IEC 14143-1:1998 NUM 519 SANS 15289:2007 / ISO/IEC 15289:2006 NUM 527
Information technology - Software measurement - Functional size Systems and software engineering - Content of systems and
measurement Part 1: Definition of concepts software life cycle process information products (Documentation)
SANS 14143-2:2003 / ISO/IEC 14143-2:2002 NUM 519 SANS 15504-1:2005 / ISO/IEC 15504-1:2004 NUM 530
Information Technology - Software measurement - Functional size Information technology - Process assessment Part 1: Concepts
measurement Part 2: Conformity evaluation of software size and vocabulary
measurement methods to ISO/IEC 14143-1:1998
SANS 15504-2:2004 / ISO/IEC 15504-2:2003 NUM 530
SANS 14143-3:2004 / ISO/IEC TR 14143-3:2003 NUM 519 Information technology - Process assessment Part 2: Performing
Information technology - Software measurement - Functional size an assessment
measurement Part 3: Verification of functional size measurement
methods SANS 15504-3:2004 / ISO/IEC 15504-3:2004 NUM 530
Information technology - Process assessment Part 3: Guidance on
SANS 14143-4:2003 / ISO/IEC TR 14143-4:2002 NUM 519 performing an assessment
Information Technology - Software measurement - Functional size
measurement Part 4: Reference model SANS 15504-4:2004 / ISO/IEC 15504-4:2004 NUM 530
Information technology - Process assessment Part 4: Guidance on
SANS 14143-5:2004 / ISO/IEC TR 14143-5:2004 NUM 519 use for process improvement and process capability determination
Information technology - Software measurement - Functional size
measurement Part 5: Determination of functional domains for use SANS 15504-5:1999 / ISO/IEC TR 15504-5:1999 NUM 531
with functional size measurement Information technology - Software process assessment Part 5: An
assessment model and indicator guidance
SANS 14471:1999 / ISO/IEC TR 14471:1999 NUM 521
Information technology - Software engineering - Guidelines for the SANS 15504-6:1998 / ISO/IEC TR 15504-6:1998 NUM 531
adoption of CASE tools Information technology - Software process assessment Part 6:
Guide to competency of assessors
SANS 14598-1:1999 / ISO/IEC 14598-1:1999 NUM 523
Information technology - Software product evaluation Part 1: SANS 15504-9:1998 / ISO/IEC TR 15504-9:1998 NUM 531
General overview Information technology - Software process assessment Part 9:
Vocabulary
SANS 14598-2:2003 / ISO/IEC 14598-2:2000 NUM 523
Software engineering - Product evaluation Part 2: Planning and SANS 15846:1998 / ISO/IEC TR 15846:1998 NUM 534
management Information technology - Software life cycle processes -
Configuration management
SANS 14598-3:2003 / ISO/IEC 14598-3:2000 NUM 523
Software engineering - Product evaluation Part 3: Process for SANS 15910:2003 / ISO/IEC 15910:1999 NUM 536
developers Information technology - Software user documentation process
SANS 14598-4:2003 / ISO/IEC 14598-4:1999 NUM 523
SANS 15939:2003 / ISO/IEC 15939:2002 NUM 536
Software engineering - Product evaluation Part 4: Process for
acquirers Software engineering - Software measurement process
SANS 14598-5:1998 / ISO/IEC 14598-5:1998 NUM 523 SANS 16085:2007 / ISO/IEC 16085:2006 NUM 537
Information technology - Software product evaluation Part 5: Systems and software engineering - Life cycle processes - Risk
Process for evaluators management
SANS 14598-6:2003 / ISO/IEC 14598-6:2001 NUM 523 SANS 16326:2003 / ISO/IEC TR 16326:1999 NUM 537
Software engineering - Product evaluation Part 6: Documentation Software engineering - Guide for the application of ISO/IEC 12207
of evaluation modules to project management
SANS 14756:2003 / ISO/IEC 14756:1999 NUM 524 SANS 18019:2004 / ISO/IEC 18019:2004 NUM 542
Information technology - Measurement and rating of performance Software and system engineering - Guidelines for the design and
of computer-based software systems preparation of user documentation for application software
SANS 14759:2003 / ISO/IEC TR 14759:1999 NUM 524 SANS 19759:2007 / ISO/IEC TR 19759:2005 NUM 548
Software engineering - Mock up and prototype - A categorization of Software Engineering - Guide to the Software Engineering Body of
software mock up and prototype models and their use Knowledge (SWEBOK)
SANS 14764:2003 / ISO/IEC 14764:1999 NUM 524 SANS 19760:2004 / ISO/IEC TR 19760:2003 NUM 548
Information technology - Software maintenance Systems engineering - A guide for the application of ISO/IEC
15288 (System life cycle processes)
SANS 15026:1998 / ISO/IEC 15026:1998 NUM 526
Information technology - System and software integrity levels
SANS 19761:2003 / ISO/IEC 19761:2003 NUM 548 SANS 8825-4:2007 / ISO/IEC 8825-4:2002 NUM 392
Software engineering - COSMIC-FFP - A functional size Information technology - ASN.1 encoding rules: XML Encoding
measurement method Rules (XER)
SANS 20926:2004 / ISO/IEC 20926:2003 NUM 563 SANS 8825-5:2007 / ISO/IEC 8825-5:2004 NUM 392
Software engineering - IFPUG 4.1 Unadjusted functional size Information technology - ASN.1 encoding rules: Mapping W3C XML
measurement method - Counting practices manual schema definitions into ASN.1
SANS 8825-2:2007 / ISO/IEC 8825-2:2002 NUM 392 SANS 1552:1992 NUM 179
Information technology - ASN.1 encoding rules: Specification of On-board computers for road transport
Packed Encoding Rules (PER)
SANS 2220-2-1:2005 NUM 247
SANS 8825-3:2007 / ISO/IEC 8825-3:2002 NUM 392
Electrical security systems Part 2-1: Access control systems:
Information technology - ASN.1 encoding rules: Specification of General characteristics
Encoding Control Notation (ECN)
SANS 2220-2-2:2005 NUM 247 SANS 12142:2006 / ISO 12142:2001 NUM 503
Electrical security systems Part 2-2: Access control systems: Electronic imaging - Media error monitoring and reporting
Central processor techniques for verification of stored data on optical digital data
disks
SANS 2220-2-4:2005 NUM 248
Electrical security systems Part 2.4: Access control systems: ARP 075:2006 / ISO/TR 12654:1997 NUM 724
Reader controllers Electronic imaging - Recommendations for the management of
electronic recording systems for the recording of documents that
SANS 10241:1993 NUM 465 may be required as evidence, on WORM optical disk
Tachograph centres - Installation and repair facilities, including
facilities for the installation of on-board computers
35.220.99 Other data storage devices
________________________________________________________
35.180 IT terminal and other peripheral SANS 2220-2-6:2005 NUM 248
equipment
Electrical security systems Part 2-6: Access control systems:
________________________________________________________
Access cards
SANS 2220-2-3:2005 NUM 247
Electrical security systems Part 2-3: Access control systems: Card
readers 35.240.01 Application of information technology
in general
SANS 2220-2-5:2005 NUM 248 ________________________________________________________
Electrical security systems Part 2-5: Access control systems: SANS 11581-1:2000 / ISO/IEC 11581-1:2000 NUM 496
Biometric readers
Information technology - User system interfaces and symbols -
SANS 15423:2005 / ISO/IEC 15423:2004 NUM 528 Icon symbols and functions Part 1: Icons - General
Information technology - Automatic identification and data capture SANS 11581-3:2000 / ISO/IEC 11581-3:2000 NUM 497
techniques - Bar code scanner and decoder performance testing
Information technology - User system interfaces and symbols -
SANS 19798:2007 / ISO/IEC 19798:2006 NUM 550 Icon symbols and functions Part 3: Pointer icons
Method for the determination of toner cartridge yield for colour
printers and multi-function devices that contain printer components
35.240.15 Identification cards and related
devices
35.200 Interface and interconnection ________________________________________________________
equipment SANS 7810:2004 / ISO/IEC 7810:2003 NUM 376
________________________________________________________
Identification cards - Physical characteristics
SANS 11801:2004 / ISO/IEC 11801:2002 NUM 501
Information technology - Generic cabling for customer premises SANS 7811-1:2004 / ISO/IEC 7811-1:2002 NUM 376
Identification cards - Recording technique Part 1: Embossing
SANS 18047-3:2006 / ISO/IEC TR 18047-3:2004 NUM 543
Information technology - Radio frequency identification device SANS 7811-2:2004 / ISO/IEC 7811-2:2001 NUM 377
conformance test methods Part 3: Test methods for air interface Identification cards - Recording technique Part 2: Magnetic stripe -
communications at 13,56 MHz Low coercivity
SANS 18047-4:2006 / ISO/IEC TR 18047-4:2004 NUM 543 SANS 7811-6:2004 / ISO/IEC 7811-6:2001 NUM 377
Information technology - Radio frequency identification device Identification cards - Recording technique Part 6: Magnetic stripe -
conformance test methods Part 4: Test methods for air interface High coercivity
communications at 2,45 GHz
SANS 7812-1:2004 / ISO/IEC 7812-1:2000 NUM 377
SANS 102210:2006 / ETSI TS 102210:2005 NUM 706
Identification cards - Identification of issuers Part 1: Numbering
Broadband Radio Access Networks (BRAN); HIPERMAN; System system
profiles
SANS 7812-2:2004 / ISO/IEC 7812-2:2000 NUM 377
Identification cards - Identification of issuers Part 2: Application and
35.220.10 Paper cards and tapes registration procedures
________________________________________________________
CKS 137:1971 SANS 7813:2007 / ISO/IEC 7813:2006 NUM 377
NUM 732
Punch cards Information technology - Identification cards - Financial transaction
cards
CKS 348:1972 NUM 741 SANS 7816-1:1998 / ISO/IEC 7816-1:1998 NUM 377
Punch tape Identification cards - Integrated circuit(s) cards with contacts Part 1:
Physical characteristics
SANS 7816-3:1997 / ISO/IEC 7816-3:1997 NUM 378 SANS 10373-5:2007 / ISO/IEC 10373-5:2006 NUM 482
Information technology - Identification cards - Integrated circuit(s) Identification cards - Test methods - Part 5: Optical memory cards
cards with contacts Part 3: Electronic signals and transmission
protocols
SANS 10373-6:2004 / ISO/IEC 10373-6:2001 NUM 482
SANS 7816-4:2005 / ISO/IEC 7816-4:2005 NUM 378 Identification cards - Test methods Part 6: Proximity cards
Identification cards - Integrated circuit cards Part 4: Organization,
security and commands for interchange SANS 10373-7:2004 / ISO/IEC 10373-7:2001 NUM 482
Identification cards - Test methods - Part 7: Vicinity cards
SANS 7816-5:2005 / ISO/IEC 7816-5:2004 NUM 378
Identification cards - Integrated circuit cards Part 5: Registration of
application providers SANS 10536-1:2000 / ISO/IEC 10536-1:2000 NUM 487
Identification cards - Contactless integrated circuit(s) cards - Close-
SANS 7816-6:2005 / ISO/IEC 7816-6:2004 NUM 378 coupled cards Part 1: Physical characteristics
Identification cards - Integrated circuit cards Part 6: Interindustry
data elements for interchange SANS 10536-2:2004 / ISO/IEC 10536-2:1995 NUM 487
Identification cards - Contactless integrated circuit(s) cards Part 2:
SANS 7816-7:1999 / ISO/IEC 7816-7:1999 NUM 378 Dimensions and location of coupling areas
Identification cards - Integrated circuit(s) cards with contacts Part 7:
Interindustry commands for Structured Card Query Language SANS 10536-3:2004 / ISO/IEC 10536-3:1996 NUM 487
(SCQL) Identification cards - Contactless integrated circuit(s) cards Part 3:
Electronic signals and reset procedures
SANS 7816-8:2005 / ISO/IEC 7816-8:2004 NUM 378
Identification cards - Integrated circuit cards Part 8: Commands for SANS 14443-1:2000 / ISO/IEC 14443-1:2000 NUM 520
security operations Identification cards - Contactless integrated circuit(s) cards -
Proximity cards Part 1: Physical characteristics
SANS 7816-9:2005 / ISO/IEC 7816-9:2004 NUM 378
Identification cards - Integrated circuit cards Part 9: Commands for SANS 14443-2:2004 / ISO/IEC 14443-2:2001 NUM 520
card management Identification cards - Contactless integrated circuit(s) cards -
Proximity cards Part 2: Radio frequency power and signal interface
SANS 7816-10:1999 / ISO/IEC 7816-10:1999 NUM 379
Identification cards - Integrated circuit(s) cards with contacts Part SANS 14443-3:2004 / ISO/IEC 14443-3:2001 NUM 520
10: Electronic signals and answer to reset for synchronous cards Identification cards - Contactless integrated circuit(s) cards -
Proximity cards Part 3: Initialization and anticollision
SANS 7816-11:2005 / ISO/IEC 7816-11:2004 NUM 379
Identification cards - Integrated circuit cards Part 11: Personal SANS 14443-4:2004 / ISO/IEC 14443-4:2001 NUM 520
verification through biometric methods Identification cards - Contactless integrated circuit(s) cards -
Proximity cards Part 4: Transmission protocol
SANS 7816-12:2007 / ISO/IEC 7816-12:2005 NUM 379
Identification cards - Integrated circuit cards Part 12: Cards with SANS 15457-1:2004 / ISO/IEC 15457-1:2001 NUM 529
contacts - USB electrical interface and operating procedures Identification cards - Thin flexible cards Part 1: Physical
characteristics
SANS 7816-13:2007 / ISO/IEC 7816-13:2007 NUM 379
Identification cards - Integrated circuit cards Part 13: Commands SANS 15457-2:2004 / ISO/IEC 15457-2:2001 NUM 529
for application management in a multi-application environment Identification cards - Thin flexible cards Part 2: Magnetic recording
techniques
SANS 7816-15:2005 / ISO/IEC 7816-15:2004 NUM 379
Identification cards - Integrated circuit cards Part 15: Cryptographic SANS 15457-3:2004 / ISO/IEC 15457-3:2002 NUM 529
information application Identification cards - Thin flexible cards Part 3: Test methods
35.240.20 IT applications in office work SANS 18234-6:2007 / ISO/TS 18234-6:2006 NUM 544
________________________________________________________ Traffic and Travel Information (TTI) - TTI via Transport Protocol
SANS 326:2004 / ISO/IEC 20060:2001 NUM 44 Expert Group (TPEG) data-streams Part 6: Location referencing
applications
Information technology - Open Terminal Architecture (OTA)
specification - Virtual machine specification SANS 24014-1:2007 / ISO 24014-1:2007 NUM 565
Public transport - Interoperable fare management system Part 1:
Architecture
35.240.30 IT applications in information,
documentation and publishing SANS 24535:2007 NUM 565
________________________________________________________ Intelligent transport systems - Framework for electronic registration
and identification of vehicles using passive radio frequency
SANS 15511:2005 / ISO 15511:2003 NUM 531
identification (RFID)
Information and documentation - International Standard Identifier
for Libraries and Related Organizations (ISIL) SANS 62056-21:2003 / IEC 62056-21:2002 NUM 699
Electricity metering - Data exchange for meter reading, tariff and
SANS 16642:2006 / ISO 16642:2003 NUM 538
load control Part 21: Direct local data exchange
Computer applications in terminology - Terminological markup
framework ARP 044:1997 NUM 722
SANS 19005-1:2006 / ISO 19005-1:2005 SABS Model electronic data interchange (EDI) agreement
NUM 544
Document management - Electronic document file format for long-
term preservation Part 1: Use of PDF 1.4 (PDF/A-1) NRS 009-2-1:1998 NUM 753
Electricity sales systems Part 2: Functional and performance
requirements Section 1: System master stations
35.240.40 IT applications in banking
________________________________________________________ NRS 009-2-3:1998 NUM 754
Electricity sales systems Part 2: Functional and performance
SANS 11568-1:1994 / ISO 11568-1:1994 NUM 496 requirements Section 3: Security module
Banking - Key management (retail) Part 1: Introduction to key
management NRS 009-2-5:1997 NUM 754
Electricity sales systems Part 2: Functional and performance
SANS 11568-2:1994 / ISO 11568-2:1994 NUM 496 requirements Section 5: Error handling
Banking - Key management (retail) Part 2: Key management
techniques for symmetric ciphers NRS 009-3:2001 NUM 754
Electrical sales systems Part 3: Database format
SANS 11568-3:1994 / ISO 11568-3:1994 NUM 496
Banking - Key management (retail) Part 3: Key life cycle for
NRS 009-6-1:1997 NUM 754
symmetric ciphers
Electricity sales systems Part 6: Interface standards - Section 1:
SANS 21188:2006 / ISO 21188:2006 NUM 563 Credit dispensing unit - Standard token translator interface
Public key infrastructure for financial services - Practices and policy
NRS 009-6-3:1997 NUM 754
framework
Electricity sales systems Part 6: Interface standards Section 3:
System master station - Credit dispensing unit
35.240.60 IT applications in transport and trade
NRS 009-6-7:2002 NUM 755
________________________________________________________
Electricity sales systems Part 6: Interface standards Section 7:
SANS 1621-0:1997 NUM 186 Standard transfer specification/ Credit dispensing unit - Electricity
Messages for electronic data interchange (EDI) Part 0: General dispenser - Token encoding and data encryption and decryption
information
SANS 18234-4:2007 / ISO/TS 18234-4:2006 NUM 543 SANS 19105:2003 / ISO 19105:2000 NUM 545
Traffic and Travel Information (TTI) - TTI via Transport Protocol Geographic information - Conformance and testing
Expert Group (TPEG) data-streams Part 4: Road Traffic Message
(RTM) application
SANS 19106:2004 / ISO 19106:2004 NUM 545 SANS 19127:2006 / ISO/TS 19127:2005 NUM 548
Geographic information - Profiles Geographic information - Geodetic codes and parameters
SANS 19107:2003 / ISO 19107:2003 NUM 545 SANS 19133:2006 / ISO 19133:2005 NUM 548
Geographic information - Spatial schema Geographic information - Location-based services - Tracking and
navigation
SANS 19108:2003 / ISO 19108:2002 NUM 545 SANS 19135:2006 / ISO 19135:2005 NUM 548
Geographic information - Temporal schema Geographic information - Procedures for item registration
SANS 19116:2004 / ISO 19116:2004 NUM 546 SANS 18812:2003 / ISO 18812:2003 NUM 544
Geographic information - Positioning services Health informatics - Clinical analyser interfaces to laboratory
information systems - Use profiles
SANS 19117:2006 / ISO 19117:2005 NUM 546 SANS 20514:2007 / ISO/TR 20514:2005 NUM 562
Geographic information - Portrayal Health informatics - Electronic health record - Definition, scope and
context
SANS 19118:2006 / ISO 19118:2005 NUM 546
Geographic information - Encoding
35.240.99 IT applications in other fields
________________________________________________________
SANS 19119:2005 / ISO 19119:2005 NUM 547
SANS 1718-1:2007 NUM 219
Geographic information - Services
Gaming equipment Part 1: Casino equipment
SANS 19120:2003 / ISO/TR 19120:2001 NUM 547
SANS 1718-2:2005 NUM 219
Geographic information - Functional standards
Gaming equipment Part 2: Limited payout gaming equipment
SANS 19121:2000 / ISO/TR 19121:2000 NUM 547
SANS 1718-3:2003 NUM 220
Geographic information - Imagery and gridded data
Gaming equipment Part 3: Monitoring and control systems for
gaming equipment
SANS 19122:2005 / ISO/TR 19122:2004 NUM 547
Geographic information/Geomatics - Qualification and certification SANS 1718-4:2002 NUM 220
of personnel Gaming equipment Part 4: Wagering record-keeping systems
SANS 19123:2006 / ISO 19123:2005 NUM 547
SANS 1718-7:2001 NUM 220
Geographic information - Schema for coverage geometry and
functions Gaming equipment Part 7: Tokens
SANS 19125-1:2005 / ISO 19125-1:2004 NUM 547 SANS 1718-9:2005 NUM 220
Geographic information - Simple feature access Part 1: Common Gaming equipment Part 9: Central monitoring system for limited
architecture payout machines
SANS 19125-2:2005 / ISO 19125-2:2004 NUM 547
Geographic information - Simple feature access Part 2: SQL option
SANS 19796-1:2006 / ISO/IEC 19796-1:2005 NUM 550 SANS 10594:2007 / ISO 10594:2006 NUM 487
Information technology - Learning, education and training - Quality Micrographics - Rotary camera systems - Test target for checking
management, assurance and metrics Part 1: General approach performance
37.040.10 Photographic equipment. Projectors SANS 12653-2:2006 / ISO 12653-2:2000 NUM 508
________________________________________________________ Electronic imaging - Test target for the black-and-white scanning of
office documents Part 2: Method of use
SANS 1452:2005 NUM 162
Overhead projectors SANS 15801:2005 / ISO/TR 15801:2004 NUM 533
Electronic imaging - Information stored electronically -
SANS 60335-2-56:2003 / IEC 60335-2-56:2002 NUM 622 Recommendations for trustworthiness and reliability
Household and similar electrical appliances - Safety Part 2-56:
SANS 24537:2007 / ISO 24537:2007 NUM 565
Particular requirements for projectors and similar appliances
Micrographics - Dimensions for reels used for 16 mm and 35 mm
SANS 60598-2-9:1987 / IEC 60598-2-9:1987 NUM 636 microfilm
Luminaires Part 2: Particular requirements Section 9: Photo and
ARP 072:2006 / ISO/TR 12031:2000 NUM 724
film luminaires (non-professional)
Micrographics - Inspection of silver-gelatin microforms for evidence
of deterioration
37.040.25 Radiograpic films
ARP 073:2006 / ISO/TS 12033:2001 NUM 724
________________________________________________________
Electronic imaging - Guidance for selection of document image
SANS 11699-1:2005 / ISO 11699-1:1998 NUM 499 compression methods
Non-destructive testing - Industrial radiographic films Part 1:
Classification of film systems for industrial radiography ARP 074:2006 / ISO/TR 12036:2000 NUM 724
Micrographics - Expungement, deletion, correction or amendment
SANS 11699-2:2005 / ISO 11699-2:1998 NUM 499 of records on microforms
Non-destructive testing - Industrial radiographic films Part 2:
Control of film processing by means of reference values ARP 076:2006 / ISO/TR 14105:2001 NUM 725
Electronic imaging - Human and organizational issues for
CKS 225:1970 NUM 736 successful Electronic Image Management (EIM) implementation
Envelopes for X-ray films
ARP 077:2006 / ISO/TR 18492:2005 NUM 725
Long-term preservation of electronic document-based information
37.060.10 Motion picture equipment
________________________________________________________
37.100.10 Reproduction equipment
SANS 60335-2-56:2003 / IEC 60335-2-56:2002 NUM 622 ________________________________________________________
Household and similar electrical appliances - Safety Part 2-56:
Particular requirements for projectors and similar appliances SANS 19752:2007 / ISO/IEC 19752:2004 NUM 548
Information technology - Method for the determination of toner
SANS 60598-2-9:1987 / IEC 60598-2-9:1987 NUM 636 cartridge yield for monochromatic electrophotographic printers and
Luminaires Part 2: Particular requirements Section 9: Photo and multi-function devices that contain printer components
film luminaires (non-professional)
SANS 19798:2007 / ISO/IEC 19798:2006 NUM 550
Method for the determination of toner cartridge yield for colour
37.080 Document imaging applications printers and multi-function devices that contain printer components
________________________________________________________
SANS 24705:2007 / ISO/IEC TR 24705:2005 NUM 565
SANS 1452:2005 NUM 162 Information technology - Office machines - Machines for colour
Overhead projectors image reproduction - Method of specifying image reproduction of
colour devices by digital and analog test charts
SANS 10141:2007 NUM 447 CKS 431:1979 NUM 743
The processing, testing and storage of silver-gelatin microfilm for Typing stencils for duplicating machines
archival purposes
Determination of gold in gold jewellery alloys - Cupellation method SANS 20084:2004 / ECE R84:1991 NUM 559
(fire assay)
Uniform provisions concerning the approval of passenger cars
SANS 11427:1993 / ISO 11427:1993 NUM 495 equipped with an internal combustion engine with regard to the
measurement of fuel consumption
Determination of silver in silver jewellery alloys - Volumetric
(potentiometric) method using potassium bromide VC 8053:2001 NUM 771
SANS 11490:1995 / ISO 11490:1995 NUM 495 Replacement brake lining assemblies for road vehicles
SANS 20027:1998 / ECE R27:1998 NUM 554 SANS 20087:2005 / ECE R87:2003 NUM 559
Uniform provisions for the approval of advance-warning triangles Uniform provisions concerning the approval of daytime running
lamps for power-driven vehicles
SANS 20028:1972 / ECE R28:1972 NUM 554 SANS 20091:2007 / ECE R91:2003 NUM 560
Uniform provisions for the approval of audible warning devices and Uniform provisions concerning the approval of side-marker lamps
of motor vehicles with regard to their audible signals for motor vehicles and their trailers
SANS 20031:1992 / ECE R31:1992 NUM 554 SANS 20098:2007 / ECE R98:2005 NUM 560
Uniform provisions concerning the approval of halogen sealed- Uniform provisions concerning the approval of motor vehicle
beam unit (HSB unit) motor vehicle headlamps emitting an headlamps equipped with gas-discharge light sources
asymmetrical passing beam or a driving beam or both
SANS 20099:2002 / ECE R99:2001 NUM 560
SANS 20037:2007 / ECE R37:2005 NUM 554
Uniform provisions concerning the approval of gas-discharge light
Uniform provisions concerning the approval of filament lamps for sources for use in approved gas-discharge lamp units of power-
use in approved lamp units of power-driven vehicles and of their driven vehicles
trailers
SANS 20104:1998 / ECE R104:1998 NUM 561
SANS 20048:2007 / ECE R48:2006 NUM 555
Uniform provisions concerning the approval of retro-reflective
Uniform provisions concerning the approval of vehicles with regard markings for heavy and long vehicles and their trailers
to the installation of lighting and light-signalling devices
SANS 20112:2003 / ECE R112:2001 NUM 562
SANS 20050:2007 / ECE R50:2004 NUM 556
Uniform provisions concerning the approval of motor vehicle
Uniform provisions concerning the approval of front position lamps, headlamps emitting an asymmetrical passing beam or a driving
rear position lamps, stop lamps, direction indicators and rear- beam or both and equipped with filament lamps
registration-plate illuminating devices for vehicles of category L
VC 8048:1996 NUM 771
SANS 20053:2005 / ECE R53:2002 NUM 556
Replacement incandescent lamps for motor vehicles
Uniform provisions concerning the approval of category L3 vehicles
with regard to the installation of lighting and light-signalling devices
VC 8049:1997 NUM 771
SANS 20056:1989 / ECE R56:1989 NUM 556 Replacement headlights for motor vehicles
Uniform provisions concerning the approval of headlamps for
mopeds and vehicles treated as such
VC 8050:1996 NUM 771
SANS 20057:1995 / ECE R57:1995 NUM 556 Replacement secondary lights for motor vehicles
Uniform provisions concerning the approval of headlamps for motor
cycles and vehicles treated as such VC 8078:2003 NUM 773
Compulsory specification for material for contour marking on motor
SANS 20065:2007 / ECE R65:2005 NUM 557
vehicles
Uniform provisions concerning the approval of special warning
lamps for power-driven vehicles and their trailers
43.040.30 Indicating and control devices
SANS 20069:1987 / ECE R69:1987 NUM 557
________________________________________________________
Uniform provisions concerning the approval of rear marking plates
for slow-moving vehicles (by construction) and their trailers SANS 467:2005 / EN 50148:1995 NUM 58
Electronic taximeters
SANS 20070:1987 / ECE R70:1987 NUM 557
Uniform provisions concerning the approval of rear marking plates SANS 1440:1987 NUM 159
for heavy and long vehicles
Motor vehicle safety: The steering mechanism of motor vehicles
SANS 20072:1988 / ECE R72:1988 NUM 558 (Category M1 only): Behaviour on impact
Uniform provisions concerning the approval of motor cycle SANS 1441:2006 NUM 159
headlamps emitting an asymmetrical passing beam and a driving
beam and equipped with halogen filament lamps (HS1) Speedometer equipment on motor vehicles
SANS 20074:2000 / ECE R74:2000 NUM 558 SANS 20006:2003 / ECE R6:2001 NUM 551
Uniform provisions concerning the approval of category L1 vehicles Uniform provisions concerning the approval of direction indicators
with regard to the installation of lighting and light-signalling devices for motor vehicles and their trailers
SANS 20076:1988 / ECE R76:1988 NUM 558 SANS 20039:2003 / ECE R39:2003 NUM 554
Uniform provisions concerning the approval of headlamps for Uniform provisions concerning the approval of vehicles with regard
mopeds emitting a driving beam and a passing beam to the speedometer equipment including its installation
SANS 20082:1989 / ECE R82:1989 NUM 559 SANS 20089:2006 / ECE R89:1993 NUM 560
Uniform provisions concerning the approval of moped headlamps Uniform prescriptions for approval of: I Vehicles with regard to
equipped with filament halogen lamps (HS2 lamps) limitation of their maximum speed or their adjustable speed
limitation function II Vehicles with regard to the installation of a
SANS 20086:1993 / ECE R86:1993 NUM 559
speed limiting device (SLD) or adjustable speed limitation device
Uniform provisions concerning the approval of agricultural or (ASLD) of an approved type III Speed limitation devices (SLD) and
forestry tractors with regard to the installation of lighting and light- adjustable speed limitation device (ASLD)
signalling devices
Road vehicles - Elastomeric cups and seals for hydraulic brake SANS 4930:2003 / ISO 4930:1978 NUM 273
actuating cylinders using a non-petroleum base hydraulic brake
Road vehicles - Elastomeric seals for hydraulic disc brake cylinders
fluid (service temperature 70 °C max.)
using a non-petroleum base hydraulic brake fluid (service
SANS 206:2003 / ISO 6119:1980 NUM 30 temperature 150 °C max.)
Road vehicles - Elastomeric seals for hydraulic disc brake cylinders SANS 10256:2005 NUM 467
using a non-petroleum base hydraulic brake fluid (service
Brake drum reconditioning
temperature 120 °C max.)
SANS 1051-1:2006 NUM 104 SANS 20013:2004 / ECE R13:2004 NUM 552
Braking Part 1: General Uniform provisions concerning the approval of vehicles of
categories M, N and O with regard to braking
SANS 1051-2:2006 NUM 104
SANS 20013-H:2005 / ECE R13-H:1998 NUM 552
Braking Part 2: Response time of braking devices on vehicles fitted
Uniform provisions concerning the approval of passenger cars with
with compressed-air braking devices
regard to braking
SANS 1051-3:2006 NUM 104
SANS 20078:2003 / ECE R78:1988 NUM 558
Braking Part 3: Energy sources and reservoirs
Uniform provisions concerning the approval of vehicles of category
L with regard to braking
SANS 1051-4:2006 NUM 104
SANS 20090:2003 / ECE R90:2001 NUM 560
Braking Part 4: Spring brakes
Uniform provisions concerning the approval of replacement brake
lining assemblies and drum brake linings for power-driven vehicles
SANS 1051-5:2006 NUM 104 and their trailers
Braking Part 5: Parking brakes: Mechanically locked brake cylinder
(lock actuator) type SANS 50286-2:1992 / EN 286-2:1992 NUM 573
Simple unfired pressure vessels designed to contain air or nitrogen
SANS 1051-6:2006 NUM 104 Part 2: Pressure vessels for air braking and auxiliary systems for
Braking Part 6: Distribution of braking effort and compatibility of motor vehicles and their trailers
vehicles in combination
VC 8053:2001 NUM 771
SANS 1194:2006 NUM 119 Replacement brake lining assemblies for road vehicles
Nylon tubing for air-brake applications
VC 8080:2005 NUM 773
SANS 1207:1998 NUM 126 Replacement elastomeric cups and seals for hydraulic brake
Braking actuating cylinders for use in motor vehicles using non-petroleum
base hydraulic brake fluid (service temperature 70 °C to 150 °C
SANS 1447-1:2007 NUM 161 max)
Braking (motor and towed vehicles, designed for low speed or for
use off public roads) Part 1: Low speed vehicles 43.040.50 Transmissions, suspensions
SANS 1447-2:2007 NUM 161 ________________________________________________________
Braking (motor and towed vehicles, designed for low speed or for SANS 1208:1989 NUM 126
use off public roads) Part 2: Low speed trailers Cast light alloy road wheels
SANS 1477-1:2005 NUM 166
SANS 1550-1:2005 NUM 177
Pneumatic braking system connections between drawing and
drawn vehicles Part 1: Contact type couplings Motor vehicle tyres and rims - Dimensions and loads Part 1:
General
SANS 1477-2:2005 NUM 166
SANS 1550-10:2006 NUM 178
Pneumatic braking system connections between drawing and
drawn vehicles Part 2: Palm type couplings Motor vehicle tyres and rims - Dimensions and loads Part 10: Rim
contours
SANS 1477-3:2005 NUM 166
SANS 3894:2007 / ISO 3894:2005 NUM 261
Pneumatic braking system connections between drawing and
drawn vehicles Part 3: The arrangement of connections on Road vehicles - Wheels/rims for commercial vehicles - Test
vehicles, using contact type or palm type couplings methods
SANS 10356:2005 NUM 480 SANS 3795:1989 / ISO 3795:1989 NUM 260
The repair of heavy-duty tubeless and multi-piece steel wheels for Road vehicles, and tractors and machinery for agriculture and
off-road vehicles forestry - Determination of burning behaviour of interior materials
SANS 20124:2007 / ECE R124:2007 NUM 562 SANS 10250:2006 NUM 466
Uniform provisions concerning the approval of wheels for Automotive air-conditioning system fitment and repair centres
passenger cars and their trailers
43.040.70 Couplings
SANS 1564:2005 NUM 180 ________________________________________________________
The strength of seats (and their anchorages) of large passenger
buses SANS 1505-1:2007 NUM 169
Ball type couplings and towing brackets for towing caravans and
SANS 1653:2004 NUM 190 light trailers Part 1: Towing brackets and integrated towing devices
Automotive carpeting
SANS 1505-2:2007 NUM 169 SANS 20044:1998 / ECE R44:1998 NUM 555
Ball type couplings and towing brackets for towing caravans and Uniform provisions concerning the approval of restraining devices
light trailers Part 2: Coupling balls and ball supports for child occupants of power-driven vehicles ("child restraint
system")
SANS 1505-3:2007 NUM 169
Ball type couplings and towing brackets for towing caravans and SANS 24135-1:2007 / ISO 24135-1:2006 NUM 565
light trailers Part 3: Coupling sockets Industrial trucks - Specifications and test methods for operator
restraint systems Part 1: Lap-type seat belts
SANS 20055:2003 / ECE R55:2001 NUM 556
Uniform provisions concerning the approval of mechanical coupling ARP 065:2007 NUM 723
components of combinations of vehicles Test and fitment centres for airbags
The installation of restraining devices (safety belts) in motor SANS 10274:2005 NUM 470
vehicles (Incorporating part of EEC Directive 77/541 'Safety belts The refurbishing of diesel engines
and restraint systems of motor vehicles', and the amending EEC
Directives 81/576 and 82/319, with modifications)
SANS 10278:2005 NUM 471
SANS 20012:1994 / ECE R12:1994 NUM 552 The remanufacture of petrol engines
Uniform provisions concerning the approval of vehicles with regard
to the protection of the driver against the steering mechanism in
the event of impact
43.060.20 Pressure charging and air/exhaust
SANS 20014:2006 / ECE R14:2006 NUM 552 gas ducting systems
Uniform provisions concerning the approval of vehicles with regard ________________________________________________________
to safety-belt anchorages, isofix anchorages systems and isofix top SANS 1428:1991 NUM 156
tether anchorages
Replacement silencing systems for motor vehicles
SANS 20016:2006 / ECE R16:2005 NUM 553
Uniform provisions concerning the approval of I. Safety-belts, SANS 1501:2002 NUM 169
restraint systems, child restraint systems and isofix child restraint Replacement silencing systems for vehicles of category L only
systems for occupants of power-driven vehicles II. Vehicles
equipped with safety-belts, restraint systems, child restraint
systems and isofix child restraint systems
SANS 20059:2007 / ECE R59:1983 NUM 557 SANS 1792-1:1998 NUM 224
Uniform provisions concerning the approval of replacement Refillable welded steel gas cylinders Part 1: LPG fuel tanks for
silencing systems motor vehicles
43.080.01 Commercial vehicles in general SANS 20107:2006 / ECE R107:2004 NUM 561
________________________________________________________ Uniform provisions concerning the approval of category M2 or M3
vehicles with regard to their general construction
SANS 1550-3:2006 NUM 178
Motor vehicle tyres and rims - Dimensions and loads Part 3: VC 8023:2005 NUM 769
Commercial vehicle tyres
Compulsory specification for motor vehicles of category M2 and M3
VC 8024:2005 NUM 769
Compulsory specification for motor vehicles of category N1
43.080.99 Other commercial vehicles
________________________________________________________
43.080.10 Trucks and trailers VC 8057:2004 NUM 772
________________________________________________________ Agricultural tractors
SANS 1518:2005 NUM 172
Transport of dangerous goods - Design requirements for road
vehicles and portable tanks 43.100 Passenger cars. Caravans and light
trailers
SANS 1708:2003 NUM 219
________________________________________________________
Safety aspects of canopies as fitted to category N1 and N2 motor
vehicles
SANS 1550-2:2006 NUM 177 SANS 20076:1988 / ECE R76:1988 NUM 558
Motor vehicle tyres and rims - Dimensions and loads Part 2: Uniform provisions concerning the approval of headlamps for
Passenger car tyres mopeds emitting a driving beam and a passing beam
SANS 20056:1989 / ECE R56:1989 NUM 556 SANS 1144:2007 NUM 114
Uniform provisions concerning the approval of headlamps for Hydraulic trolley jacks
mopeds and vehicles treated as such
SANS 20057:1995 / ECE R57:1995 NUM 556 SANS 10216:2007 NUM 460
Uniform provisions concerning the approval of headlamps for motor Evaluation of vehicle test stations
cycles and vehicles treated as such
SANS 10241:1993 NUM 465
SANS 20060:2007 / ECE R60:1984 NUM 557
Tachograph centres - Installation and repair facilities, including
Uniform provisions concerning the approval of two-wheeled motor
facilities for the installation of on-board computers
cycles and mopeds with regard to driver-operated controls
including the identification of controls, tell-tales and indicators SANS 10250:2006 NUM 466
SANS 20063:2004 / ECE R63:1985 NUM 557 Automotive air-conditioning system fitment and repair centres
Uniform provisions concerning the approval of two-wheeled
mopeds with regard to noise SANS 10253:2005 NUM 467
Brake service workshops
SANS 20072:1988 / ECE R72:1988 NUM 558
Uniform provisions concerning the approval of motor cycle
SANS 10372:2003 NUM 481
headlamps emitting an asymmetrical passing beam and a driving
beam and equipped with halogen filament lamps (HS1) Automotive fitment centres
SANS 20074:2000 / ECE R74:2000 NUM 558 ARP 065:2007 NUM 723
Uniform provisions concerning the approval of category L1 vehicles
Test and fitment centres for airbags
with regard to the installation of lighting and light-signalling devices
SANS 10316:2005 NUM 476 SANS 4302:2002 / ISO 4302:1981 NUM 264
Aircraft ground support - Vehicle-mounted loading equipment Cranes - Wind load assessment
SANS 4301-1:2002 / ISO 4301-1:1986 NUM 263 SANS 4310:2002 / ISO 4310:1981 NUM 264
Cranes and lifting appliances - Classification Part 1: General Cranes - Test code and procedures
SANS 4308-1:2005 / ISO 4308-1:2003 NUM 264 SANS 7296-3:2007 / ISO 7296-3:2006 NUM 372
Cranes and lifting appliances - Selection of wire ropes Part 1: Cranes - Graphical symbols Part 3: Tower cranes
General
SANS 7752-3:2007 / ISO 7752-3:1993 NUM 376
SANS 4308-2:2007 / ISO 4308-2:1988 NUM 264
Cranes - Controls - Layout and characteristics Part 3: Tower cranes
Cranes and lifting appliances - Selection of wire ropes Part 2:
Mobile cranes - Coefficient of utilization
SANS 7752-5:2002 / ISO 7752-5:1985 NUM 376
SANS 7363:2002 / ISO 7363:1986 NUM 373 Lifting appliances - Controls - Layout and characteristics - Part 5:
Cranes and lifting appliances - Technical characteristics and Overhead travelling cranes and portal bridge cranes
acceptance documents
SANS 8566-1:2002 / ISO 8566-1:1992 NUM 389
SANS 10314-1:2005 NUM 476 Cranes - Cabins Part 1: General
Vertical lift elevating work platforms - Operation and maintenance
Part 1: Mobile manually propelled elevating aerial platforms SANS 8566-2:2007 / ISO 8566-2:1995 NUM 389
SANS 10314-2:2006 NUM 476 Cranes - Cabins Part 2: Mobile cranes
Vertical lift elevating work platforms - Operation and maintenance
Part 2: Mobile self-propelled elevating aerial platforms SANS 8566-3:2007 / ISO 8566-3:1992 NUM 389
Cranes - Cabins Part 3: Tower cranes
SANS 10316:2005 NUM 476
Aircraft ground support - Vehicle-mounted loading equipment
SANS 8566-5:2002 / ISO 8566-5:1992 NUM 389
Cranes - Cabins Part 5: Overhead travelling and portal bridge
cranes
53.020.20 Cranes
________________________________________________________ SANS 8686-3:2007 / ISO 8686-3:1998 NUM 391
SANS 19:2004 NUM 2 Cranes - Design principles for loads and load combinations Part 3:
Tower cranes
The inspection, testing and examination of mobile cranes
SANS 8686-5:2003 / ISO 8686-5:1992 NUM 391
SANS 61-1:2003 / ISO 10245-1:1994 NUM 6 Cranes - Design principles for loads and load combinations Part 5:
Cranes - Limiting and indicating devices Part 1: General Overhead travelling and portal bridge cranes
SANS 4301-2:2002 / ISO 4301-2:1985 SANS 9926-3:2007 / ISO 9926-3:2005 NUM 403
NUM 263
Lifting appliances - Classification - Part 2: Mobile cranes Cranes - Training of drivers Part 3: Tower cranes
SANS 4301-3:2002 / ISO 4301-3:1993 SANS 9928-1:2006 / ISO 9928-1:1990 NUM 403
NUM 263
Cranes - Classification - Part 3: Tower cranes Cranes - Crane driving manual Part 1: General
SANS 4301-5:1991 / ISO 4301-5:1991 SANS 9942-3:2007 / ISO 9942-3:1999 NUM 404
NUM 263
Cranes - Classification Part 5: Overhead travelling and portal Cranes - Information labels Part 3: Tower cranes
bridge cranes
SANS 10973:1995 / ISO 10973:1995 NUM 489 SANS 1594:2003 NUM 184
Cranes - Spare parts manual Manually operated chain blocks
SANS 11660-1:2007 / ISO 11660-1:1999 NUM 498 SANS 1595:2003 NUM 184
Cranes - Access, guards and restraints Part 1: General Forged steel lifting hooks for use with steel chains of strength
grade M(4), P(5), S(6), T(8) and V(10)
SANS 11660-2:2007 / ISO 11660-2:1994 NUM 498
SANS 1596:2007 NUM 184
Cranes - Access, guards and restraints Part 2: Mobile cranes
Drop forged eyebolts and eyenuts for lifting purposes
SANS 11660-3:2007 / ISO 11660-3:1999 NUM 498
SANS 1640:2002 NUM 188
Cranes - Access, guards and restraints Part 3: Tower cranes
Reconditioned manually operated chain blocks
SANS 11661:2007 / ISO 11661:1998 NUM 498
SANS 1819:2006 NUM 230
Mobile cranes - Presentation of rated capacity charts
Snatch blocks
SANS 11662-1:2007 / ISO 11662-1:1995 NUM 498
SANS 1820:2006 NUM 230
Mobile cranes - Experimental determination of crane performance
Part 1: Tipping loads and radii Reconditioned snatch blocks
SANS 12478-1:2006 / ISO 12478-1:1997 NUM 507 SANS 1824:2003 NUM 230
Cranes - Maintenance manual Part 1: General Beam trolleys (crawls)
SANS 12480-1:2006 / ISO 12480-1:1997 NUM 507 SANS 2415:2005 / ISO 2415:2004 NUM 250
Cranes - Safe use Part 1: General Forged shackles for general lifting purposes - Dee shackles and
bow shackles
SANS 12485:2007 / ISO 12485:1998 NUM 508
SANS 3056:1986 / ISO 3056:1986 NUM 254
Tower cranes - Stability requirements
Non-calibrated round steel link lifting chain and chain slings - Use
and maintenance
SANS 12488-1:2007 / ISO 12488-1:2005 NUM 508
Cranes - Tolerances for wheels and travel and traversing tracks SANS 3189-2:1985 / ISO 3189-2:1985 NUM 255
Part 1: General Sockets for wire ropes for general purposes Part 2: Special
requirements for sockets produced by forging or machined from the
SANS 15442:2007 / ISO 15442:2005 NUM 529 solid
Cranes - Safety requirements for loader cranes
SANS 3189-3:1985 / ISO 3189-3:1985 NUM 255
SANS 19961:2007 / ISO/TR 19961:2005 NUM 550 Sockets for wire ropes for general purposes Part 3: Special
requirements for sockets produced by casting
Cranes - Safety code on mobile cranes
SANS 4309:2005 / ISO 4309:2004 NUM 264
SANS 23853:2006 / ISO 23853:2004 NUM 565 Cranes - Wire ropes - Care, maintenance, installation, examination
Cranes - Training of slingers and signallers and discard
SANS 8539:1986 / ISO 8539:1986 NUM 388 SANS 50280:2004 / EN 280:2001 NUM 573
Forged steel lifting components for use with grade T(8) chain Mobile elevating work platforms - Design calculations - Stability
criteria - Construction - Safety - Examinations and tests
SANS 10293:1996 NUM 472 SANS 51808:1999 / EN 1808:1999 NUM 589
Condition assessment of steel wire ropes on mine winders Safety requirements on suspended access equipment - Design
calculations, stability criteria, construction - Tests
SANS 50818-6:2000 / EN 818-6:2000 NUM 583
Short link chain for lifting purposes - Safety Part 6: Chain slings -
Specification for information for use and maintenance to be 53.040.10 Conveyors
provided by the manufacturer ________________________________________________________
SANS 1669-1:2005 NUM 191 SANS 13563-1:2007 / ISO 13563-1:2001 NUM 512
Conveyor belt pulleys Part 1: Pulley types, construction and Single side loading fork-lift trucks Part 1: Stability tests
dimensions
SANS 1977:2006 / ISO 1977:2000 NUM 243 SANS 15794:2007 / ISO 15794:2001 NUM 533
Conveyor chains, attachments and sprockets Bi-directional and multi-directional fork-lift trucks - Stability tests
SANS 3512:2006 / ISO 3512:1992 NUM 258 SANS 15870:2007 / ISO 15870:2000 NUM 534
Heavy-duty cranked-link transmission chains Powered industrial trucks - Safety signs and hazard pictorials -
General principles
SANS 4348:1983 / ISO 4348:1983 NUM 265 SANS 24134:2007 / ISO 24134:2006 NUM 565
Flat-top chains and associated chain wheels for conveyors Industrial trucks - Additional requirements for automated functions
on trucks
SANS 6973:2006 / ISO 6973:1986 NUM 371
SANS 24135-1:2007 / ISO 24135-1:2006 NUM 565
Drop-forged rivetless chains for conveyors
Industrial trucks - Specifications and test methods for operator
restraint systems Part 1: Lap-type seat belts
SANS 10284:2006 / ISO 284:2003 NUM 471
Conveyor belts - Electrical conductivity - Specification and test VC 8057:2004 NUM 772
method Agricultural tractors
SANS 21183-1:2006 / ISO 21183-1:2005 NUM 563
Light conveyor belts Part 1: Principal characteristics and
applications 53.080 Storage equipment
________________________________________________________
SANS 21183-2:2006 / ISO 21183-2:2005 NUM 563
SANS 1528-3:1996 NUM 173
Light conveyor belts Part 2: List of equivalent terms
Furniture Part 3: Storage units
SANS 1726-2:2003 / EN 1726-2:2000 NUM 220 SANS 259-3:2003 / ISO 5006-3:1993 NUM 37
Safety of industrial trucks - Self-propelled trucks up to and including Earth-moving machinery - Operator's field of view Part 3: Criteria
10 000 kg capacity and tractors with a drawbar pull up to and
including 20 000 N Part 2: Additional requirements for trucks with
SANS 261:2003 / ISO 6165:2001 NUM 37
elevating operator position and trucks specifically designed to
travel with elevated loads Earth-moving machinery - Basic types - Vocabulary
SANS 2867:2003 / ISO 2867:1994 NUM 253 55.020 Packaging and distribution of goods
Earth-moving machinery - Access systems in general
________________________________________________________
SANS 3449:2003 / ISO 3449:1992 NUM 257 SANS 289:2006 NUM 40
Earth-moving machinery - Falling-object protective structures - Labelling requirements for prepackaged products (prepackages)
Laboratory tests and performance requirements and general requirements for the sale of goods subject to legal
metrology control
SANS 3450:2003 / ISO 3450:1996 NUM 257
Earth-moving machinery - Braking systems of rubber-tyred SANS 458:2005 NUM 57
machines - Systems and performance requirements and test Tolerances permitted for the accuracy of measurements of
procedures products (including prepackaged products) in terms of legal
metrology legislation
SANS 3471:2003 / ISO 3471:1994 NUM 257
Earth-moving machinery - Roll-over protective structures - SANS 1841:2003 NUM 234
Laboratory tests and performance requirements Control of the quantity of contents in prepacked packages within
the legal prescriptions of the Trade Metrology Act and Regulations
SANS 6683:2003 / ISO 6683:1981 NUM 367
Earth-moving machinery - Seat belts and seat belt anchorages SANS 1844:2005 NUM 235
The testing of polypropylene woven fabrics for use in flexible
SANS 10968:2003 / ISO 10968:1995 NUM 489 intermediate bulk containers (FIBCs) for non-dangerous goods
Earth-moving machinery - Operator's controls SANS 10229-1:2005 NUM 463
Transport of dangerous goods - Packaging and large packaging for
SANS 12509:2003 / ISO 12509:1995 NUM 508 road and rail transport Part 1: Packaging
Earth-moving machinery - Lighting, signalling and marking lights,
and reflex-reflector devices SANS 10229-2:2007 NUM 463
Transport of dangerous goods - Packaging and large packaging for
road and rail transport Part 2: Large packaging
53.120 Equipment for manual handling
SANS 10265:1999 NUM 469
________________________________________________________
The classification and labelling of dangerous substances and
SANS 77:1975 NUM 8 preparations for sale and handling
Wooden handles for brooms, hay-forks, and rakes (including
general requirements for other wooden handles for tools) SANS 10406:2007 NUM 485
Transport of dangerous goods - The reprocessing of previously
SANS 268:1975 NUM 38 certified packaging
Wooden handles for beater picks, mattocks, and picks
SANS 60335-2-75:2006 / IEC 60335-2-75:2005 NUM 625 SANS 1833-8:2007 / ISO 1833-8:2006 NUM 232
Household and similar electrical appliances - Safety Part 2-75: Textiles - Quantitative chemical analysis Part 8: Mixtures of acetate
Particular requirements for commercial dispensing appliances and and triacetate fibres (method using acetone)
vending machines
SANS 1833-9:2007 / ISO 1833-9:2006 NUM 232
Textiles - Quantitative chemical analysis Part 9: Mixtures of acetate
59.020 Processes of the textile industry and triacetate fibres (method using benzyl alcohol)
________________________________________________________
SANS 1833-10:2007 / ISO 1833-10:2006 NUM 232
SANS 977:2003 NUM 96
Textiles - Quantitative chemical analysis Part 10: Mixtures of
Textile tolerances triacetate or polylactide and certain other fibres (method using
dichloromethane)
SANS 979:2006 NUM 97
SANS 1833-11:2007 / ISO 1833-11:2006 NUM 232
Textile products - Permanent mothproofing
Textiles - Quantitative chemical analysis Part 11: Mixtures of
cellulose and polyester fibres (method using sulfuric acid)
SANS 4921:2000 / ISO 4921:2000 NUM 273
Knitting - Basic concepts - Vocabulary SANS 1833-12:2007 / ISO 1833-12:2006 NUM 232
Textiles - Quantitative chemical analysis Part 12: Mixtures of
acrylic, certain modacrylics, certain chlorofibres, certain elastanes
and certain other fibres (method using dimethylformamide)
59.040 Textile auxiliary materials
________________________________________________________ SANS 1833-13:2007 / ISO 1833-13:2006 NUM 233
SANS 1394-1:1998 NUM 150 Textiles - Quantitative chemical analysis Part 13: Mixtures of
certain chlorofibres and certain other fibres (method using carbon
Duvets and pillows Part 1: Plumage filled disulfide/acetone)
SANS 5322:2005 NUM 291 SANS 1833-14:2007 / ISO 1833-14:2006 NUM 233
Feathers and down - Scouring test Textiles - Quantitative chemical analysis Part 14: Mixtures of
acetate and certain chlorofibres (method using acetic acid)
SANS 6060:2005 NUM 340 SANS 1833-15:2007 / ISO 1833-15:2006 NUM 233
Analysis of plumage fillings (hand-sorting method) Textiles - Quantitative chemical analysis Part 15: Mixtures of jute
and certain animal fibres (method by determining nitrogen content)
SANS 3071:2007 / ISO 3071:2005 NUM 254 SANS 5267:2005 NUM 288
Textiles - Determination of pH of aqueous extract Threads per centimetre in narrow woven textile fabrics
SANS 3759:1994 / ISO 3759:1994 NUM 260 SANS 5272:2007 NUM 288
Textiles - Preparation, marking and measuring of fabric specimens Non-fibrous material content of textiles - Hydrochloric acid method
and garments in tests for determination of dimensional change
SANS 13938-1:1999 / ISO 13938-1:1999 NUM 515 SANS 1585:2007 NUM 183
Textiles - Bursting properties of fabrics Part 1: Hydraulic method for Coated fabrics for shelters and rainwear
determination of bursting strength and bursting distension
SANS 13746:2000 / ISO 13746:2000 NUM 512 59.140.20 Raw skins, hides and pelts
Textile floor coverings - Guidelines for installation and use on stairs ________________________________________________________
SANS 1179:1977 NUM 118
SANS 50994:2003 / EN 994:1995 NUM 586 Wet blue chrome-tanned hides
Textile floor coverings - Determination of the side length,
squareness and straightness of tiles CKS 320:1972 NUM 740
Sheepskins (for medical use)
59.080.70 Geotextiles
________________________________________________________
SANS 10221:1988 NUM 461
59.140.30 Leather and furs
________________________________________________________
The testing of geotextiles
SANS 995:1990 NUM 98
SANS 10409:2005 NUM 485 Chamois leathers
Design, selection and installation of geomembranes
SANS 4047:1977 / ISO 4047:1977 NUM 262
Leather - Determination of sulphated total ash and sulphated water-
59.080.99 Other products of the textile industry insoluble ash
________________________________________________________ SANS 5617:2001 NUM 304
SANS 149:2004 NUM 21 Determination of water content in leather
Absorbent cotton wool and cotton-and-viscose wool products
SANS 5618:2001 NUM 304
SANS 196:2007 NUM 28 Leather - Matter extractable by petroleum ether
Orthopaedic padding
SANS 5619:2001 NUM 304
SANS 228:2007 NUM 34 Determination of water-soluble matter content in leather
Absorbent cotton wool
SANS 5620:1972 NUM 304
SANS 469:2006 NUM 58 Determination of sulphated ash content of water-solubles in leather
Absorbent cotton lint
SANS 5621:1972 NUM 304
SANS 1212:2005 NUM 126 Determination of total ash content of leather
The National Flag
SANS 5622:1972 NUM 304
Determination of total sulphated ash content of leather
59.100.10 Textile glass materials
________________________________________________________ SANS 5623:1972 NUM 304
SANS 141:2006 NUM 21 Determination of ash content of water-insolubles in leather
Glass-reinforced polyester (GRP) laminates
SANS 5624:1972 NUM 305
SANS 419:2007 NUM 54 Determination of hide substance of leather
E glass fibre chopped strand mat for reinforcement of polyester and
other liquid laminating systems SANS 5625:1990 NUM 305
Leather - Determination of chromic oxide content
SANS 1130:2006 NUM 113
Fibre reinforcing material for pipe wrapping
SANS 5626:1992 NUM 305
Leather and footwear components - pH value and difference figure
SANS 1446:2007 NUM 160 of an aqueous extract
Glass rovings
SANS 5627:1972 NUM 305
SANS 1538:2001 NUM 175 Determination of magnesium sulphate content of leather by
complexometric titration
Plain-woven glass rovings for glass-reinforced plastics laminates
SANS 5628:1972 NUM 305
Determination of perspiration resistance of lining leather
59.140.01 Leather technology in general
________________________________________________________ SANS 5629:1993 NUM 305
SANS 6276:2001 NUM 359 Leather and fibreboard - Determination of apparent density
Leather - Softness assessment
SANS 5630:1968 NUM 305
Determination of resistance to grain cracking of leather
SANS 1118-6:2001 NUM 111 SANS 3759:1994 / ISO 3759:1994 NUM 260
School clothing Part 6: Dresses, tunics and gyms Textiles - Preparation, marking and measuring of fabric specimens
and garments in tests for determination of dimensional change
SANS 1118-7:2001 NUM 111 SANS 5369:2005 NUM 292
School clothing Part 7: Girls' slacks and skirts Dimensions of hosiery
CKS 126:1973 NUM 731 SANS 60335-2-71:2007 / IEC 60335-2-71:2007 NUM 624
Sou'westers Household and similar electrical appliances - Safety Part 2-71:
Particular requirements for electrical heating appliances for
breeding and rearing animals
CKS 189:1969 NUM 735
Lining leather (chrome-tanned syntan-retanned) side
65.020.99 Other standards related to farming
CKS 190:1973 NUM 735 and forestry
Printed, side upper leather ________________________________________________________
SANS 10118:1990 NUM 417
CKS 344:2000 NUM 741 The aerial application of agricultural remedies
Orthopaedic boots (Goodyear welted construction)
SANS 10331:2000 NUM 478
CKS 345:1992 NUM 741 Translocation of certain species of wild herbivore
Orthopaedic boots (machine sewn with stuck-on outer soles)
SANS 20096:2003 / ECE R96:1995 NUM 560 SANS 11512:2003 / ISO 11512:1995 NUM 496
Uniform provisions concerning the approval of compression ignition Machinery for forestry - Tracked special machines - Performance
(C.I.) engines to be installed in agricultural and forestry tractors and criteria for brake systems
in non-road mobile machinery with regard to the emissions of
SANS 11850:2003 / ISO 11850:2003 NUM 501
pollutants by the engine
Machinery for forestry - Self-propelled machinery - Safety
requirements
65.060.20 Soil-working equipment
SANS 60745-2-15:2007 / IEC 60745-2-15:2006 NUM 646
________________________________________________________
Hand-held motor-operated electric tools - Safety Part 2-15:
SANS 390:1974 NUM 50 Particular requirements for hedge trimmers
Forks and rakes
67.020 Processes in the food industry 67.060 Cereals, pulses and derived products
________________________________________________________ ________________________________________________________
CKS 138:1968 NUM 732 SANS 11870:2005 / ISO 11870:2000 NUM 501
Custard powder Milk and milk products - Determination of fat content - General
guidance on the use of butyrometric methods
CKS 289:1971 NUM 738
Magou powder (fortified) 67.100.10 Milk and processed milk products
________________________________________________________
CKS 458:1976 NUM 744
SANS 315:2005 / ISO 1211:1999 NUM 43
Protein, vitamin, mineral (PVM) supplementary food mixture
Milk - Determination of fat content - Gravimetric method (Reference
method)
CKS 479:1977 NUM 745
Grain sorghum malt SANS 318:2005 / ISO 1736:2000 NUM 43
Dried milk and dried milk products - Determination of fat content -
CKS 633:2000 Gravimetric method (Reference method)
NUM 751
Textured soya protein foodstuffs SANS 1678:2001 NUM 192
Sterilized milk
SANS 11285:2005 / ISO 11285:2004 NUM 494 SANS 6317:2003 NUM 364
Milk - Determination of lactulose content - Enzymatic method Methods of chemical analysis of meat and fish products
SANS 3960:2003 / ISO 3960:2001 NUM 262 71.040.10 Chemical laboratories. Laboratory
Animal and vegetable fats and oils - Determination of peroxide equipment
value ________________________________________________________
SANS 8420:2003 / ISO 8420:2002 NUM 385 SANS 171:2006 NUM 25
Animal and vegetable fats and oils - Determination of content of Glassware and equipment for microbiological tests
polar compounds
SANS 10140-4:2006 NUM 447
67.220.10 Spices and condiments Identification colour marking Part 4: Contents of taps and valves in
laboratories
________________________________________________________
CKS 163:1969 NUM 733 SANS 10378:2005 NUM 482
Mustard powder General requirements for the competence of verification
laboratories in terms of the Trade Metrology Act
CKS 630:2002 NUM 751 ARP 030:1993 NUM 721
Mayonnaise, salad cream and salad dressing The application of SABS 0259, General requirements for the
competence of calibration and testing laboratories, by facilities
monitoring hazardous chemical substances
67.220.20 Food additives
________________________________________________________
71.040.20 Laboratory ware and related
SANS 49:2007 NUM 6 apparatus
Edible gelatin ________________________________________________________
SANS 111-1:1981 / ISO 835-1:1981 NUM 15
SANS 1642:2007 NUM 189 Laboratory glassware - Graduated pipettes Part 1: General
Baker's compressed yeast requirements
SANS 111-3:1981 / ISO 835-3:1981 NUM 15 SANS 61010-2-081:2005 / IEC 61010-2-081:2001 NUM 673
Laboratory glassware - Graduated pipettes Part 3: Pipettes for Safety requirements for electrical equipment for measurement,
which a waiting time of 15 s is specified control and laboratory use Part 2-081: Particular requirements for
automatic and semi-automatic laboratory equipment for analysis
SANS 111-4:1981 / ISO 835-4:1981 NUM 16 and other purposes
Laboratory glassware - Graduated pipettes Part 4: Blow-out
pipettes CKS 221:1974 NUM 736
Rubber bungs
SANS 112:1977 / ISO 648:1977 NUM 16
Laboratory glassware - One-mark pipettes
71.040.30 Chemical reagents
SANS 113:1976 / ISO 383:1976 NUM 16 ________________________________________________________
Laboratory glassware - Interchangeable conical ground joints SANS 605:2007 / ISO Guide 33:2000 NUM 69
Uses of certified reference materials
SANS 114:1978 / ISO 384:1978 NUM 16
Laboratory glassware - Principles of design and construction of SANS 607:2007 / ISO Guide 34:2000 NUM 70
volumetric glassware
General requirements for the competence of reference material
SANS 115-1:1984 / ISO 385-1:1984 NUM 16 producers
Laboratory glassware - Burettes Part 1: General requirements SANS 608:2007 / ISO Guide 35:2006 NUM 70
Reference materials - General and statistical principles for
SANS 115-2:1984 / ISO 385-2:1984 NUM 16 certification
Laboratory glassware - Burettes Part 2: Burettes for which no
waiting time is specified SANS 3696:1987 / ISO 3696:1987 NUM 259
Water for analytical laboratory use - Specification and test methods
SANS 115-3:1984 / ISO 385-3:1984 NUM 16
Laboratory glassware - Burettes Part 3: Burettes for which a waiting
time of 30 s is specified
71.040.40 Chemical analysis
SANS 117:1975 / ISO 1769:1975 NUM 17 ________________________________________________________
Laboratory glassware - Pipettes - Colour coding SANS 334:1992 / ISO 334:1992 NUM 44
Solid mineral fuels - Determination of total sulfur - Eschka method
SANS 128:1998 / ISO 1042:1998 NUM 18
Laboratory glassware - One-mark volumetric flasks SANS 4524-4:1985 / ISO 4524-4:1985 NUM 268
Metallic coatings - Test methods for electrodeposited gold and gold
SANS 1108:2005 NUM 109 alloy coatings Part 4: Determination of gold content
Glass test tubes
SANS 5064:1975 NUM 277
Anticoagulant acid citrate dextrose solution, identification of
SANS 4787:1984 / ISO 4787:1984 NUM 272
Laboratory glassware - Volumetric glassware - Methods for use
and testing of capacity SANS 5937:2000 NUM 329
Phosphorus content of coal (photometric method)
SANS 4788:1980 / ISO 4788:1980 NUM 272
Laboratory glassware - Graduated measuring cylinders SANS 5965:2006 NUM 330
Non-fibrous material content of textiles (alkali hydrolysis method)
SANS 4800:1998 / ISO 4800:1998 NUM 272
Laboratory glassware - Separating funnels and dropping funnels SANS 5966:2007 NUM 330
Removable non-fibrous material content of textiles (scouring
SANS 61010-2-010:2007 / IEC 61010-2-010:2005 NUM 672 method)
Safety requirements for electrical equipment for measurement,
control and laboratory use Part 2-010: Particular requirements for SANS 6076:1983 NUM 340
laboratory equipment for the heating of materials Ether-soluble matter content (PVC upper, outer sole and heel
materials)
SANS 61010-2-020:2007 / IEC 61010-2-020:2006 NUM 672
Safety requirements for electrical equipment for measurement, SANS 6099:1987 NUM 342
control and laboratory use Part 2-020: Particular requirements for Sodium chloride (in the presence of potassium chloride) content of
laboratory centrifuges solutions
SANS 61010-2-032:2003 / IEC 61010-2-032:2002 NUM 673 SANS 6292:2006 NUM 361
Safety requirements for electrical equipment for measurement, Lime tests - Chemical analysis - Sample preparation and reagents
control, and laboratory use Part 2-032: Particular requirements for
hand-held and hand-manipulated current sensors for electrical test
and measurement
71.040.50 Physicochemical methods of analysis
________________________________________________________
SANS 53763-18:2006 / EN 13763-18:2003 NUM 592 SANS 51276:2006 / EN 1276:1997 NUM 587
Explosives for civil uses - Detonators and relays Part 18: Chemical disinfectants and antiseptics - Quantitative suspension
Determination of series firing current of electric detonators test for the evaluation of bactericidal activity of chemical
disinfectants and antiseptics used in food, industrial, domestic, and
SANS 53763-20:2006 / EN 13763-20:2003 NUM 592 institutional areas - Test method and requirements (phase 2, step
1)
Explosives for civil uses - Detonators and relays Part 20:
Determination of total electrical resistance of electric detonators
SANS 593 AND SANS 592:1957 NUM 68 SANS 5993:2004 NUM 333
Wood preservative mixtures containing 1) high temperature Chromium detection in timber
creosote and coal tar or 2) low and medium temperature creosote
and coal tar (SANS 592 and SANS 593, bound together)
SANS 5994:2004 NUM 333
SANS 593:1957 NUM 68 Arsenic detection in timber
Wood preservative mixtures containing low and medium
temperature creosote and coal tar SANS 5995:1994 NUM 333
Retention of boron in timber (colorimetric test)
SANS 673:1987 NUM 75
Mixtures of copper-chromium-arsenic compounds for timber
preservation SANS 5996:2004 NUM 333
Tin detection in timber
SANS 870:1967 NUM 87
A borax-sodium pentachlorophenate mixture for anti-sapstain SANS 5997:2004 NUM 334
treatment of timber
Zinc detection in timber
SANS 871:1967 NUM 87
Boron timber preservatives SANS 6000:2004 NUM 334
Heartwood detection in timber of the Eucalyptus species
SANS 1265:1979 NUM 133
Waxy oil obtained from the synthol process and from other SANS 6061:2007 NUM 340
petroleum sources CCA salts equivalent mass concentration of aqueous solutions that
contain mixtures of copper-chromium-arsenic compounds used for
SANS 1288:2007 NUM 135 timber preservation
Preservative-treated timber
SANS 6238:2007 NUM 355
SANS 1290:2005 NUM 135 Retention of boron in timber (analytical method)
Wood-preserving mixtures of creosote and waxy oil
SANS 6278:2007 NUM 359
SANS 1388:2005 NUM 149 Boric acid equivalent mass concentration of aqueous solutions that
contain borate timber preservatives
Tributyltin oxide-lindane timber preservative
SANS 6303:2004 NUM 363
SANS 1618:1994 NUM 186 Depth of penetration of borate preservatives in timber
Timber preservative - Insecticidal deltamethrin for interior use
SANS 10005:2006 NUM 405
SANS 1746:1997 NUM 221 The preservative treatment of timber
Timber preservative - Tributyltin naphthenate-permethrin
SANS 333:1996 / ISO 333:1996 NUM 44 SANS 5072:2005 / ISO 5072:1997 NUM 277
Coal - Determination of nitrogen - Semi-micro Kjeldahl method Brown coals and lignites - Determination of true relative density and
apparent relative density
SANS 335:1974 / ISO 335:1974 NUM 45
SANS 5074:1994 / ISO 5074:1994 NUM 277
Hard coal - Determination of caking power - Roga test
Hard coal - Determination of Hardgrove grindability index
SANS 5940:1980 NUM 329 SANS 13909-7:2001 / ISO 13909-7:2001 NUM 515
Carbon dioxide content of coal (gravimetric method) Hard coal and coke - Mechanical sampling Part 7: Methods for
determining the precision of sampling, sample preparation and
testing
SANS 5941:1980 NUM 329
Carbon dioxide content of coal (titrimetric method) SANS 13909-8:2001 / ISO 13909-8:2001 NUM 515
Hard coal and coke - Mechanical sampling Part 8: Methods of
SANS 6072:1984 NUM 340 testing for bias
Coking properties of coal (Ruhr dilatometer test)
SANS 14180:1998 / ISO 14180:1998 NUM 520
Solid mineral fuels - Guidance on the sampling of coal seams
SANS 6073:1984 NUM 340
Yields of tar, water, gas, and coke residue from coal by low
SANS 15117-1:2006 / ISO 15117-1:2004 NUM 526
temperature distillation
Coal flow properties Part 1: Bin flow
SANS 6079:1983 NUM 341
Size analysis of coal SANS 15237:2004 / ISO 15237:2003 NUM 527
Solid mineral fuels - Determination of total mercury content of coal
SANS 7404-1:1994 / ISO 7404-1:1994 NUM 373
Methods for the petrographic analysis of bituminous coal and SANS 15238:2004 / ISO 15238:2003 NUM 527
anthracite Part 1: Vocabulary Solid mineral fuels - Determination of total cadmium content of coal
SANS 7404-2:1985 / ISO 7404-2:1985 NUM 373
Methods for the petrographic analysis of bituminous coal and SANS 17246:2006 / ISO 17246:2005 NUM 540
anthracite Part 2: Method of preparing coal samples Coal - Proximate analysis
SANS 9931:1991 / ISO 9931:1991 NUM 403 SANS 18283:2007 / ISO 18283:2006 NUM 544
Coal - Sampling of pulverized coal conveyed by gases in direct Hard coal and coke - Manual sampling
fired coal systems
SANS 10320:2004 NUM 477 SANS 20904:2007 / ISO 20904:2006 NUM 562
South African guide to the systematic evaluation of coal resources Hard coal - Sampling of slurries
and coal reserves
SANS 20905:2006 / ISO 20905:2004 NUM 562
SANS 10752:1994 / ISO 10752:1994 NUM 488
Coal preparation - Determination of dust/moisture relationship for
Coal sizing equipment - Performance evaluation coal
SANS 11760:2007 / ISO 11760:2005 NUM 500 73.100.01 Mining equipment in general
Classification of coals ________________________________________________________
SANS 10086-2:2006 NUM 411
SANS 12902:2007 / ISO/TS 12902:2001 NUM 509
The installation, inspection and maintenance of equipment used in
Solid mineral fuels - Determination of total carbon, hydrogen and explosive atmospheres Part 2: Electrical apparatus installed
nitrogen - Instrumental methods underground in mines
SANS 13909-1:2001 / ISO 13909-1:2001 NUM 514
Hard coal and coke - Mechanical sampling Part 1: General 73.100.20 Ventilation, air-conditioning and
introduction
illumination equipment
SANS 13909-2:2001 / ISO 13909-2:2001 NUM 514 ________________________________________________________
Hard coal and coke - Mechanical sampling Part 2: Coal - Sampling SANS 1438-1:1987 NUM 158
from moving streams Helmet light assemblies for miners Part 1: Incandescent lamps
SANS 13909-3:2002 / ISO 13909-3:2001 NUM 514
Hard coal and coke - Mechanical sampling Part 3: Coal - Sampling SANS 1438-2:1987 NUM 158
from stationary lots Helmet light assemblies for miners Part 2: Lead-acid batteries
SANS 1438-5:1987 NUM 158 SANS 29001:2006 / ISO/TS 29001:2003 NUM 566
Helmet light assemblies for miners Part 5: Helmet light assemblies Petroleum, petrochemical and natural gas industries - Sector-
specific quality management systems - Requirements for product
and service supply organizations
SANS 10282:1997 NUM 471
Maintenance of helmet light assemblies
75.060 Natural gas
________________________________________________________
73.100.40 Haulage and hoisting equipment SANS 208:2005 NUM 30
________________________________________________________ The design and installation of compressed natural gas (CNG)
SANS 273:2007 NUM 38 vehicle filling stations
The design, manufacture, maintenance and safe operation of
chairlifts in mines
75.080 Petroleum products in general
SANS 971:2003 NUM 95 ________________________________________________________
Fire-retardant textile-reinforced conveyor belting (for use in fiery SANS 1367-1:1982 NUM 145
mines) Insecticidal paraffinic petroleum oils for use on citrus trees Part 1:
Base oils
SANS 1589:1994 NUM 183
The braking performance of trackless underground mining vehicles SANS 1367-2:1982 NUM 145
- Load haul dumpers and dump trucks Insecticidal paraffinic petroleum oils for use on citrus trees Part 2:
Monophase emulsifiable concentrates
SANS 10208-1:2005 NUM 458
Design of structures for the mining industry Part 1: Headgear
structures 75.100 Lubricants, industrial oils and related
SANS 10208-2:2007 NUM 458 products
________________________________________________________
Design of structures for the mining industry Part 2: Sinking stages
SANS 619:2007 NUM 70
SANS 10208-3:2001 NUM 459 Emulsifiable cutting oil (light duty)
Design of structures for the mining industry Part 3: Conveyances
SANS 1289:1980 NUM 135
SANS 10266:2007 NUM 469 Base blending oil (high viscosity index)
The safe use, operation and inspection of man-riding belt
conveyors in mines SANS 1435:2004 NUM 157
Biocides for use in emulsions of aqueous metal working fluid and
SANS 10293:1996 NUM 472
aqueous hydraulic fluid
Condition assessment of steel wire ropes on mine winders
SANS 1516:2005 NUM 171
SANS 10294:2000 NUM 472 High performance engine lubricating oil for petrol engines (for API
The performance, operation, testing and maintenance of drum Service Category SJ)
winders relating to rope safety
SANS 1517:2005 NUM 171
High performance engine lubricating oil for diesel engines (for API
73.100.99 Other mining equipment Service Category CH-4)
________________________________________________________ SANS 1829:2005
NUM 231
SANS 869:1976 NUM 86 Lubricants for use in the food industry
Mine crayons
SANS 1842:2005 NUM 234
SANS 1283:2002 NUM 134 High performance engine lubricating oil for petrol engines (for API
Modified poly(vinyl chloride) (PVC-M) pressure pipe and couplings Service Category SL)
for cold water services in underground mining
SANS 1843:2005 NUM 235
High performance engine lubricating oil for diesel engines (for API
73.120 Equipment for processing of minerals Service Category CI-4)
________________________________________________________
SANS 1851:2000 NUM 235
SANS 126:1989 / ISO 924:1989 NUM 18 Lubricating grease
Coal preparation plant - Principles and conventions for flowsheets
SANS 1858:2007 NUM 236
SANS 10752:1994 / ISO 10752:1994 NUM 488 Oil spill dispersants
Coal sizing equipment - Performance evaluation
SANS 132:1977 / ISO 1170:1977 NUM 18 SANS 7404-2:1985 / ISO 7404-2:1985 NUM 373
Coal and coke - Calculation of analyses to different bases Methods for the petrographic analysis of bituminous coal and
anthracite Part 2: Method of preparing coal samples
SANS 133:1993 / ISO 1213-1:1993 NUM 18 SANS 7404-3:1994 / ISO 7404-3:1994 NUM 373
Solid mineral fuels - Vocabulary Part 1: Terms relating to coal Methods for the petrographic analysis of bituminous coal and
preparation anthracite Part 3: Method of determining maceral group
composition
SANS 334:1992 / ISO 334:1992 NUM 44
Solid mineral fuels - Determination of total sulfur - Eschka method SANS 7404-5:1994 / ISO 7404-5:1994 NUM 374
Methods for the petrographic analysis of bituminous coal and
SANS 406:2006 NUM 52 anthracite Part 5: Method of determining microscopically the
Coal and coke - Analysis and testing - Determination of trace reflectance of vitrinite
elements - Guide to the determination of trace elements
SANS 8833:1989 / ISO 8833:1989 NUM 392
SANS 408:2007 NUM 52 Magnetite for use in coal preparation - Test methods
Coal and coke - Analysis and testing - Higher rank coal ash and
coke ash - Major and minor elements - Wavelength dispersive X- SANS 9931:1991 / ISO 9931:1991 NUM 403
ray fluorescence spectrometric method Coal - Sampling of pulverized coal conveyed by gases in direct
fired coal systems
SANS 409:2006 NUM 53
Coal and coke - Analysis and testing - Determination of trace SANS 11724:2007 / ISO 11724:2004 NUM 500
elements - Coal, coke and fly-ash - Determination of eleven trace Solid mineral fuels - Determination of total fluorine in coal, coke
elements - Flame atomic absorption spectrometric method and fly ash
SANS 411:2006 NUM 53 SANS 12902:2007 / ISO/TS 12902:2001 NUM 509
Coal and coke - Analysis and testing - Determination of trace Solid mineral fuels - Determination of total carbon, hydrogen and
elements - Determination of arsenic, antimony and selenium - nitrogen - Instrumental methods
Hydride generation method
SANS 13909-1:2001 / ISO 13909-1:2001 NUM 514
SANS 412:2006 NUM 53
Hard coal and coke - Mechanical sampling Part 1: General
Coal and coke - Analysis and testing - Determination of trace introduction
elements - Determination of boron content - ICP-AES method
SANS 13909-5:2001 / ISO 13909-5:2001 NUM 515
SANS 414:2006 NUM 53
Hard coal and coke - Mechanical sampling Part 5: Coke - Sampling
Coal and coke - Analysis and testing - Higher rank coal ash and from moving streams
coke ash - Major and minor elements - Acid digestion/flame atomic
absorption spectrometric method SANS 13909-6:2001 / ISO 13909-6:2001 NUM 515
SANS 520:2007 / ISO 556:1980 NUM 62 Hard coal and coke - Mechanical sampling Part 6: Coke -
Preparation of test samples
Coke (greater than 20 mm in size) - Determination of mechanical
strength SANS 13909-7:2001 / ISO 13909-7:2001 NUM 515
SANS 567:2007 / ISO 567:1995 NUM 67 Hard coal and coke - Mechanical sampling Part 7: Methods for
determining the precision of sampling, sample preparation and
Coke - Determination of bulk density in a small container testing
SANS 579:2005 / ISO 579:1999 NUM 67 SANS 13909-8:2001 / ISO 13909-8:2001 NUM 515
Coke - Determination of total moisture Hard coal and coke - Mechanical sampling Part 8: Methods of
testing for bias
SANS 609:1996 / ISO 609:1996 NUM 70 SANS 15239:2006 / ISO 15239:2005 NUM 527
Solid mineral fuels - Determination of carbon and hydrogen - High Solid mineral fuels - Evaluation of the measurement performance
temperature combustion method of on-line analysers
SANS 626-2:2007 / ISO 1213-2:1992 NUM 71 SANS 18283:2007 / ISO 18283:2006 NUM 544
Solid mineral fuels - Vocabulary Part 2: Terms relating to sampling, Hard coal and coke - Manual sampling
testing and analysis
SANS 1014:1985 / ISO 1014:1985 NUM 100 ARP 056:2006 NUM 722
Coke - Determination of true relative density, apparent relative Low-smoke solid fuel (LSSF) for household use
density and porosity
CKS 561:2000 NUM 748
SANS 1399:2002 NUM 150
Anthracitic and bituminous coals
Wood charcoal and charcoal briquettes for household use
CKS 503:1978 NUM 746 Fibre-reinforced plastics (FRP) tanks for buried (underground)
storage for petroleum products
Coal tar fuels
SANS 1830:2006 NUM 231
Flexible piping for underground use at service stations and
75.160.30 Gaseous fuels consumer installations
________________________________________________________
SANS 10087-1:2004 NUM 411
SANS 1237:2007 NUM 129 The handling, storage, distribution and maintenance of liquefied
Single-stage regulators for liquefied petroleum gas (LPG) petroleum gas in domestic, commercial, and industrial installations
Part 1: Liquefied petroleum gas installations involving gas storage
containers of individual water capacity not exceeding 500 L and a
SANS 1774:2007 NUM 222 combined water capacity not exceeding 3 000 L per installation
Liquefied petroleum gases
SANS 10087-2:1977 NUM 411
SANS 10087-6:2006 NUM 412 The handling, storage, and distribution of liquefied petroleum gas in
domestic, commercial, and industrial installations Part 2:
The handling, storage, distribution and maintenance of liquefied
Installations in mobile units and small non-permanent buildings
petroleum gas in domestic, commercial, and industrial installations
Part 6: The application of liquefied petroleum and compressed SANS 10087-3:2004 NUM 412
natural gases as engine fuels for internal combustion engines
The handling, storage and distribution of liquefied petroleum gas in
SANS 60079-20:1996 / IEC 60079-20:1996 NUM 604 domestic, commercial, and industrial installations Part 3: Liquefied
petroleum gas installations involving storage vessels of individual
Electrical apparatus for explosive gas atmospheres Part 20: Data
water capacity exceeding 500 L
for flammable gases and vapours relating to the use of electrical
apparatus SANS 10087-4:1979 NUM 412
The handling, storage, and distribution of liquefied petroleum gas in
domestic, commercial, and industrial installations Part 4:
75.180.01 Equipment for petroleum and natural Transportation of LPG in bulk by road
gas industries in general
________________________________________________________ SANS 10087-6:2006 NUM 412
SANS 252:2003 / BS 4089:1999 NUM 36 The handling, storage, distribution and maintenance of liquefied
petroleum gas in domestic, commercial, and industrial installations
Metallic hose assemblies for liquid petroleum gases and liquefied Part 6: The application of liquefied petroleum and compressed
natural gases natural gases as engine fuels for internal combustion engines
SANS 10087-8:1976 NUM 412 SANS 6506-3:2003 / ISO 6506-3:1999 NUM 365
The handling, storage, and distribution of liquefied petroleum gas in Metallic materials - Brinell hardness test Part 3: Calibration of
domestic, commercial, and industrial installations Part 8: The reference blocks
fuelling of fork lift trucks and other LP gas operated vehicles
SANS 6507-1:2006 / ISO 6507-1:2005 NUM 366
SANS 10087-10:2006 NUM 412 Metallic materials - Vickers hardness test Part 1: Test method
The handling, storage, distribution and maintenance of liquefied
petroleum gas in domestic, commercial and industrial installations
SANS 6507-2:2006 / ISO 6507-2:2005 NUM 366
Part 10: Mobile filling stations for refillable liquefied petroleum gas
(LPG) containers of capacity not exceeding 9 kg Metallic materials - Vickers hardness test Part 2: Verification and
calibration of testing machines
SANS 10089-1:2007 NUM 413
SANS 6507-3:2006 / ISO 6507-3:2005 NUM 366
The petroleum industry Part 1: Storage and distribution of
petroleum products in above-ground bulk installations Metallic materials - Vickers hardness test Part 3: Calibration of
reference blocks
SANS 10089-2:2007 NUM 413
SANS 6508-1:2003 / ISO 6508-1:1999 NUM 366
The petroleum industry - Part 2: Electrical and other installations in
the distribution and marketing sector Metallic materials - Rockwell hardness test Part 1: Test method
(scales A,B,C,D,E,F,G,H,K,N,T)
SANS 10089-3:1999 NUM 413
SANS 6508-2:2003 / ISO 6508-2:1999 NUM 366
The petroleum industry Part 3: The installation of underground
storage tanks, pumps/dispensers and pipework at service stations Metallic materials - Rockwell hardness test Part 2: Verification and
and consumer installations calibration of testing machines (scales A,B,C,D,E,F,G,H,K,N,T)
SANS 10131:2004 NUM 445 SANS 6508-3:2003 / ISO 6508-3:1999 NUM 366
Above-ground storage tanks for petroleum products Metallic materials - Rockwell hardness test Part 3: Calibration of
reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)
SANS 119:1982 / ISO 726:1982 NUM 17 SANS 8491:2003 / ISO 8491:1998 NUM 386
Metallic materials - Hardness test - Calibration of standardized Metallic materials - Tube (in full section) - Bend test
blocks to be used for Brinell hardness testing machines
SANS 148-1:2007 / ISO 148-1:2006 NUM 21 SANS 8492:2003 / ISO 8492:1998 NUM 386
Metallic materials - Charpy pendulum impact test Part 1: Test Metallic materials - Tube - Flattening test
method
SANS 8493:2003 / ISO 8493:1998 NUM 386
SANS 2566-1:2005 / ISO 2566-1:1984 NUM 251
Metallic materials - Tube - Drift-expanding test
Steel - Conversion of elongation values Part 1: Carbon and low
alloy steels
SANS 8494:2003 / ISO 8494:1998 NUM 386
SANS 5557:1980 NUM 299 Metallic materials - Tube - Flanging test
Bending tests (longitudinal, tranverse, and edgewise) on copper
strip of sheet
SANS 8495:2003 / ISO 8495:1998 NUM 386
SANS 5558:1980 NUM 299 Metallic materials - Tube - Ring-expanding test
Flattening and doubling-over and double-bend tests on copper tube
SANS 8496:2003 / ISO 8496:1998 NUM 386
SANS 6223:1993 NUM 353 Metallic materials - Tube - Ring tensile test
The Izod impact test for metallic materials
SANS 10275:2003 / ISO 10275:1993 NUM 470
SANS 6506-1:2003 / ISO 6506-1:1999 NUM 365 Metallic materials - Sheet and strip - Determination of tensile strain
Metallic materials - Brinell hardness test Part 1: Test method hardening exponent
SANS 20482:2004 / ISO 20482:2003 NUM 562 SANS 10202:1985 NUM 457
Metallic materials - Sheet and strip - Erichsen cupping test Colour marking for the identification of wrought steels commonly
used in South Africa
SANS 9147:1987 / ISO 9147:1987 NUM 395 SANS 51706:1998 / EN 1706:1998 NUM 589
Pig-irons - Definition and classification Aluminium and aluminium alloys - Castings - Chemical composition
and mechanical properties
SANS 11564:2004 / EN 1564:1997 NUM 496 SANS 51780-1:1996 / EN 1780-1:1996 NUM 589
Founding - Austempered ductile cast irons Aluminium and aluminium alloys - Designation of unalloyed and
alloyed aluminium ingots for remelting, master alloys and castings
Part 1: Numerical designation system
77.080.20 Steels SANS 51780-2:1996 / EN 1780-2:1996 NUM 589
________________________________________________________
Aluminium and aluminium alloys - Designation of unalloyed and
SANS 1319:1999 NUM 138 alloyed aluminium ingots for remelting, master alloys and castings
Zinc phosphate primer for steel Part 2: Chemical symbol based designation system
SANS 51780-3:1996 / EN 1780-3:1996 NUM 589 SANS 26 AND SANS 25:1977 NUM 3
Aluminium and aluminium alloys - Designation of unalloyed and Zinc alloy ingots for die-castings and zinc alloy die-castings (SANS
alloyed aluminium ingots for remelting, master alloys and castings 25 and SANS 26 bound together)
Part 3: Writing rules for chemical composition
SANS 26:1977 NUM 3
Zinc alloy die-castings
77.120.30 Copper and copper alloys
________________________________________________________ SANS 101:2004 NUM 10
SANS 200:1972 NUM 29 White metal designated WM 6
Copper alloy ingots and castings
SANS 102:2004 NUM 10
SANS 404:1971 NUM 52 White metal designated WM 15
Phosphorus deoxidized non-arsenical copper
SANS 103:2004 NUM 10
SANS 405:1971 NUM 52 White metal designated WM 30
Phosphorus deoxidized arsenical copper
SANS 104:2004 NUM 10
SANS 804:1970 NUM 83 White metal designated WM 40
Unwrought tough pitch coppers: Electrolytic tough pitch high
conductivity copper SANS 106:2004 NUM 15
SANS 805:1970 NUM 83 White metal designated WM 66
Unwrought tough pitch coppers: Tough pitch high conductivity
copper SANS 107:2004 NUM 15
White metal designated WM 72
SANS 806:1970 NUM 83
Unwrought tough pitch coppers: Grade A tough pitch copper SANS 108:2004 NUM 15
White metal designated WM 80
SANS 807:1970 NUM 83
Unwrought tough pitch coppers: Grade B tough pitch copper SANS 109:2004 NUM 15
White metal designated WM 84
SANS 1303-1:1980 NUM 136
Wrought copper alloys Part 1: Chemical composition of copper-zinc SANS 124:2004 NUM 17
alloys (non-leaded and leaded)
White metal designated WM 90
SANS 1602:2007 NUM 185
Electrodeposited coatings of copper and copper alloys SANS 935:2007 NUM 91
Hot-dip (galvanized) zinc coatings on steel wire
SANS 4751:1984 / ISO 4751:1984 NUM 272
Copper and copper alloys - Determination of tin content - SANS 4381:2005 / ISO 4381:2000 NUM 265
Spectrometric method Plain bearings - Lead and tin casting alloys for multilayer plain
bearings
SANS 5563:1968 NUM 300
Determination of copper (plus silver) in copper SANS 4383:2005 / ISO 4383:2000 NUM 265
Plain bearings - Multilayer materials for thin-walled plain bearings
SANS 5564:1968 NUM 300
Determination of bismuth in copper SANS 5242:1971 NUM 285
Zinc content of white metal
SANS 5565:1968 NUM 300
Determination of lead in copper SANS 5244:1971 NUM 285
Aluminium content of printers' metal and white metal
SANS 5566:1968 NUM 300
Determination of selenium in copper SANS 5732:1971 NUM 312
Tin content of tin and lead alloys
SANS 5567:1968 NUM 300
Spectrographic analysis of copper
77.120.99 Other non-ferrous metals and their
alloys
77.120.60 Lead, zinc, tin and their alloys ________________________________________________________
________________________________________________________ SANS 29:2004
NUM 4
SANS 20:1977 NUM 2 Articles made of precious metals
Primary zinc
Coiled wire for automatic baling machines SANS 14788:2007 / ISO 14788:2005 NUM 524
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
77.140.30 Steels for pressure purposes SANS 50028-1:2004 / EN 10028-1:2000 NUM 566
________________________________________________________
Flat products made of steels for pressure purposes Part 1: General
SANS 50028-1:2004 / EN 10028-1:2000 NUM 566 requirements
Flat products made of steels for pressure purposes Part 1: General SANS 50028-7:2005 NUM 566
requirements
Flat products made of steels for pressure purposes Part 7:
SANS 50028-7:2005 NUM 566 Stainless steels
Flat products made of steels for pressure purposes Part 7:
Stainless steels
77.140.60 Steel bars and rods
________________________________________________________
77.140.35 Tool steels SANS 282:2004 NUM 39
________________________________________________________
Bending dimensions and scheduling of steel reinforcement for
CKS 251:1970 NUM 737 concrete
High speed steel tool bits SANS 920:2005 NUM 90
Steel bars for concrete reinforcement
77.140.50 Flat steel products and semi-products CKS 338:1972 NUM 740
________________________________________________________
Burglar-resisting bars for steel frames of ventilating type windows
SANS 27:1989 / EN 10202:1989 NUM 4
Cold reduced electrolytic chromium/chromium oxide coated steel
77.140.65 Steel wire, wire ropes and link chains
SANS 30:1991 / EN 10203:1991 NUM 4 ________________________________________________________
Cold reduced electrolytic tinplate SANS 23-4:2003 / EN 10223-4:1998 NUM 3
Steel wire and wire products for fences Part 4: Steel wire welded
SANS 190-1:1983 NUM 28 mesh fencing
Expanded metal Part 1: Sheets and plates
SANS 58:1978 NUM 6
SANS 190-2:1984 NUM 28 Coiled wire for automatic baling machines
Expanded metal Part 2: Building products
SANS 251:2006 NUM 36
SANS 757:2004 NUM 80 Long-link and extra-long-link medium tolerance steel chains for
general purposes
Sheet steel furniture
SANS 462:2005 / ASTM A 974:1997 NUM 57
SANS 1022:2006 NUM 101 Welded wire fabric gabions and gabion mattresses (Metallic-coated
Metal roofing tiles or polyvinyl chloride (PVC) coated)
SANS 10244-2:2003 / EN 10244-2:2001 NUM 466 77.140.80 Iron and steel castings
Steel wire and wire products - Non-ferrous metallic coatings on ________________________________________________________
steel wire Part 2: Zinc and zinc alloy coatings SANS 191:2000 NUM 28
SANS 10369:2007 NUM 481 Cast steel gate valves
Non-destructive examination and testing of steel wire rope
SANS 407:2000 NUM 52
ARP 051:2002 NUM 722 Austenitic manganese steel castings
Steel wire rope end connections
SANS 558:1973 NUM 66
CKS 231:1970 NUM 736 Cast iron surface boxes and manhole and inspection covers and
frames
Cut steel wire shot
SANS 936:1969 NUM 91
Spheroidal graphite iron castings
77.140.70 Steel profiles
________________________________________________________ SANS 936 AND SANS 937:1969 NUM 92
SANS 727:2003 NUM 78 Spheriodal graphite iron castings and austenitic spheroidal graphite
Windows and doors made from rolled mild steel sections iron castings
SANS 51676:1996 / EN 1676:1996 NUM 589 79.040 Wood, sawlogs and sawn timber
Aluminium and aluminium alloys - Alloyed ingots for remelting - ________________________________________________________
Specifications SANS 281:1972 NUM 39
SANS 51706:1998 / EN 1706:1998 NUM 589 Hardwood block and strip flooring
Aluminium and aluminium alloys - Castings - Chemical composition
and mechanical properties SANS 753:2007 NUM 80
Pine poles, cross-arms and spacers for power distribution,
telephone systems and street lighting
77.150.30 Copper products
________________________________________________________ SANS 754:2007 NUM 80
Eucalyptus poles, cross-arms and spacers for power distribution
SANS 460:2003 NUM 57
and telephone systems
Plain-ended solid drawn copper tubes for potable water
SANS 1099:1976 NUM 108
SANS 735:1973 NUM 79 Hardwood furniture timber
Cathode copper
SANS 1288:2007 NUM 135
SANS 776:2005 NUM 81 Preservative-treated timber
Copper alloy gate valves - Heavy duty
SANS 1348:2005 NUM 142
SANS 1067-1:2005 NUM 106 Polyvinyl acetate dispersion adhesives for wood
Copper-based fittings for copper tubes Part 1: Compression fittings
SANS 1349:2006 NUM 142
SANS 1067-2:2005 NUM 106 Phenolic, aminoplastic and one-part polyurethane resin adhesives
Copper-based fittings for copper tubes Part 2: Capillary solder for the laminating and finger-jointing of timber, and for furniture and
fittings joinery
83.060 Rubber
________________________________________________________
81.060.20 Ceramic products
________________________________________________________
SANS 4591:2003 / ISO 4591:1992 NUM 269 SANS 12107:2003 / EN 12107:1997 NUM 503
Plastics - Film and sheeting - Determination of average thickness Plastics piping systems - Injection-moulded thermoplastics fittings,
of a sample, and average thickness and yield of a roll, by valves and ancillary equipment - Determination of the long-term
gravimetric techniques (gravimetric thickness) hydrostatic strength of thermoplastics materials for injection
moulding of piping components
SANS 4593:2003 / ISO 4593:1993 NUM 270
SANS 15874-1:2004 / ISO 15874-1:2003 NUM 534
Plastics - Film and sheeting - Determination of thickness by
mechanical scanning Plastics piping systems for hot and cold water installations -
Polypropylene (PP) Part 1: General
CKS 33:1976 NUM 727
SANS 15874-2:2004 / ISO 15874-2:2003 NUM 534
Plastics book covers
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) Part 2: Pipes
CKS 410:1974 NUM 743
Unsupported flexible polyvinyl chloride (PVC) sheeting SANS 15874-3:2004 / ISO 15874-3:2003 NUM 534
Plastics piping systems for hot and cold water installations -
CKS 489:1977 NUM 746 Polypropylene (PP) Part 3: Fittings
EPDM-styrene rubber sheet (for waterproofing) SANS 15874-5:2004 / ISO 15874-5:2003 NUM 534
Plastics piping systems for hot and cold water installations -
CKS 515:1978 NUM 746 Polypropylene (PP) Part 5: Fitness for purpose of the system
Clear plastics map covering
SANS 15875-1:2004 / ISO 15875-1:2003 NUM 534
Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) Part 1: General
83.140.20 Laminated sheets
________________________________________________________ SANS 15875-2:2004 / ISO 15875-2:2003 NUM 534
SANS 1100:1976 NUM 109 Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) Part 2: Pipes
Industrial laminated sheets based on phenolic resin
SANS 15875-3:2004 / ISO 15875-3:2003 NUM 535
Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) Part 3: Fittings
Standards South Africa Catalogue
LST - 198
LIST OF STANDARDS CLASSIFIED BY SUBJECT
SANS 15875-5:2004 / ISO 15875-5:2003 NUM 535 SANS 1321-2:2007 NUM 139
Plastics piping systems for hot and cold water installations - Non-metallic waste traps Part 2: Rubber waste traps
Crosslinked polyethylene (PE-X) Part 5: Fitness for purpose of the
system
SANS 1581:2006 NUM 182
SANS 15876-1:2005 / ISO 15876-1:2003 NUM 535 Erasers made from plasticized PVC
Plastics piping systems for hot and cold water installations -
Polybutylene (PB) Part 1: General SANS 1588:2006 NUM 183
Shatter-resistant plastics rulers
SANS 15876-2:2005 / ISO 15876-2:2003 NUM 535
Plastics piping systems for hot and cold water installations -
Polybutylene (PB) Part 2: Pipes SANS 11193-1:2004 / ISO 11193-1:2002 NUM 492
Single-use medical examination gloves Part 1: Specification for
SANS 15876-3:2005 / ISO 15876-3:2003 NUM 535 gloves made from rubber latex or rubber solution
Plastics piping systems for hot and cold water installations -
Polybutylene (PB) Part 3: Fittings CKS 177:1969 NUM 734
Rubber bands
SANS 15876-5:2005 / ISO 15876-5:2003 NUM 535
Plastics piping systems for hot and cold water installations - CKS 178:1985 NUM 734
Polybutylene (PB) Part 5: Fitness for purpose of the system
Plastics interscrews
Coatings applied by the powder-coating process SANS 174:1992 / ISO 1513:1992 NUM 25
Paints and varnishes - Examination and preparation of samples for
SANS 5037:2003 NUM 276 testing
Paints and varnishes - Application by applicator blade SANS 175:2006 / ISO 1514:2004 NUM 25
Paints and varnishes - Standard panels for testing
SANS 5044:2005 NUM 276
Paints and varnishes - Spraying properties of paints SANS 176:1973 / ISO 1517:1973 NUM 25
Paints and varnishes - Surface-drying test - Ballotini method
SANS 177:2004 / ISO 1519:2002 NUM 25 SANS 2409:1992 / ISO 2409:1992 NUM 250
Paints and varnishes - Bend test (cylindrical mandrel) Paints and varnishes - Cross-cut test
SANS 178:2006 / ISO 1524:2000 NUM 25 SANS 2808:1997 / ISO 2808:1997 NUM 252
Paints, varnishes and printing inks - Determination of fineness of Paints and varnishes - Determination of film thickness
grind
SANS 279:2004 / ISO 1518:1992 SANS 2811-1:1997 / ISO 2811-1:1997 NUM 252
NUM 39
Paints and varnishes - Scratch test Paints and varnishes - Determination of density Part 1: Pyknometer
method
SANS 5123:2005 NUM 278 SANS 6270-1:2004 / ISO 6270-1:1998 NUM 359
Paints and varnishes - Apparent water absorption of paint films Paints and varnishes - Determination of resistance to humidity Part
1: Continuous condensation
SANS 5125:2007 NUM 279 SANS 6504-3:1998 / ISO 6504-3:1998 NUM 365
Paints and varnishes - Determination of viscosity by means of an Paints and varnishes - Determination of hiding power Part 3:
efflux cup Determination of contrast ratio (opacity) of light-coloured paints at a
fixed spreading rate
SANS 5127:2006 NUM 279
Paints and varnishes - General appearance of oils and clear SANS 7253:1996 / ISO 7253:1996 NUM 372
varnishes Paints and varnishes - Determination of resistance to neutral salt
spray (fog)
SANS 5136:2005 NUM 279
Paints and varnishes - Resistance to sheen development of paint SANS 7724-1:1984 / ISO 7724-1:1984 NUM 375
films Paints and varnishes - Colorimetry Part 1: Principles
SANS 5137:2005 NUM 279
Paints and varnishes - Daylight 45°, 0° luminous directional SANS 7724-2:1984 / ISO 7724-2:1984 NUM 375
reflectance of surface coatings and pigments Paints and varnishes - Colorimetry Part 2: Colour measurement
SANS 12944-8:1998 / ISO 12944-8:1998 NUM 510 SANS 60745-2-7:1989 / IEC 60745-2-7:1989 NUM 645
Paints and varnishes - Corrosion protection of steel structures by Safety of hand-held motor-operated electric tools Part 2-7:
protective paint systems Part 8: Development of specifications for Particular requirements for spray guns for non-flammable liquids
new work and maintenance
SANS 10120-2 HC:1988 NUM 426 SANS 10120-5 HB:1985 NUM 442
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 5: Contract
specification Section HC: Corrosion protection of structural administration Section HB: Cladding and sheeting
steelwork
SANS 10120-5 HC:1988 NUM 442
SANS 10120-2 HE:1983 NUM 426 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract
engineering construction and contract documents Part 2: Project administration Section HC: Corrosion protection of structural
specification Section HE: Structural aluminiumwork steelwork
SANS 10120-3 H:1990 NUM 431 SANS 10120-5 HE:1983 NUM 442
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 5: Contract
for design Section H: Structural steelwork administration Section HE: Structural aluminiumwork
Code of practice for use with standardized specifications for civil SANS 12944-8:1998 / ISO 12944-8:1998 NUM 510
engineering construction and contract documents Part 4: Typical
Paints and varnishes - Corrosion protection of steel structures by
schedule of quantities Section HE: Structural alumuniumwork
protective paint systems Part 8: Development of specifications for
SANS 10120-5 H:1990 NUM 442 new work and maintenance
SANS 6891:1983 / ISO 6891:1983 NUM 369 SANS 10100-1:2000 NUM 414
Timber structures - Joints made with mechanical fasteners - The structural use of concrete Part 1: Design
General principles for the determination of strength and
deformation characteristics SANS 10109-1:1995 NUM 416
SANS 10082:2007 NUM 410 Concrete floors Part 1: Bases to concrete floors
Timber frame buildings
SANS 10109-2:2004 NUM 416
SANS 10163-1:2003 NUM 450 Concrete floors Part 2: Finishes to concrete floors
The structural use of timber Part 1: Limit-states design
SANS 10120-2 TO 5 G SET NUM 420
SANS 10163-2:2001 NUM 450 Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5
The structural use of timber Part 2: Allowable stress design Section G: Concrete (structural)
SANS 2001-CM1:2007 Code of practice for use with standardized specifications for civil
NUM 243
engineering construction and contract documents Parts 2 to 5
Construction works Part CM1: Masonry walling Section GE: Precast concrete (structural)
SANS 10120-2 GF:1984 NUM 426 SANS 10120-5 GE:1984 NUM 441
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 5: Contract
specification Section GF: Prestressed concrete administration Section GE: Precast concrete (structural)
SANS 10120-3 G:1982 NUM 430 SANS 10120-5 GF:1984 NUM 442
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 5: Contract
for design Section G: Concrete (structural) administration Section GF: Prestressed concrete
SANS 10456:2007 / ISO 10456:1999 NUM 485 SANS 6155:2006 NUM 347
Building materials and products - Procedures for determining Effect of extenders, used with cement, on the reduction of
declared and design thermal values expansion caused by alkali-silica reaction (accelerated mortar
prism method)
91.100.40 Products in fibre-reinforced cement SANS 9048:1987 / ISO 9048:1987 NUM 394
________________________________________________________ Building construction - Jointing products - Determination of
SANS 685:2006 NUM 76 extrudability of sealants using standardized apparatus
Fibre-cement sheets (flat and profiled) SANS 10120-2 MH:1996 NUM 428
Code of practice for use with standardized specifications for civil
SANS 803:2005 NUM 83 engineering construction and contract documents Part 2: Project
Fibre-cement boards specification Section MH: Asphalt base and surfacing
SANS 8144-1:2006 / ISO 8144-1:1995 NUM 382 SANS 140-8:1997 / ISO 140-8:1997 NUM 20
Thermal insulation - Mineral wool mats for ventilated roof spaces Acoustics - Measurement of sound insulation in buildings and of
Part 1: Specification for applications with restricted ventilation building elements Part 8: Laboratory measurements of the
reduction of transmitted impact noise by floor coverings on a
heavyweight standard floor
91.120.10 Thermal insulation of buildings
SANS 140-11:2005 / ISO 140-11:2005 NUM 20
________________________________________________________
Acoustics - Measurement of sound insulation in buildings and of
SANS 1381-1:2007 NUM 146 building elements Part 11: Laboratory measurements of the
Materials for thermal insulation of buildings Part 1: Fibre thermal reduction of transmitted impact sound by floor coverings on
insulation mats lightweight reference floors
SANS 61312-3:2006 / IEC TS 61312-3:2000 NUM 684 SANS 1424:1987 NUM 156
Protection against lightning electromagnetic impulse Part 3: Filters for use in air-conditioning and general ventilation
Requirements of surge protective devices (SPDs)
SANS 62305-2:2007 / IEC 62305-2:2006 NUM 704 SANS 5151:1994 / ISO 5151:1994 NUM 280
Protection against lightning Part 2: Risk management Non-ducted air conditioners and heat pumps - Testing and rating
for performance
SANS 62305-3:2007 / IEC 62305-3:2006 NUM 704 SANS 10147:2002 NUM 448
Protection against lightning Part 3: Physical damage to structures Refrigerating systems including plants associated with air-
and life hazard conditioning systems
SANS 62305-4:2007 / IEC 62305-4:2006 NUM 705 SANS 10173:2003 NUM 451
Protection against lightning Part 4: Electrical and electronic The installation, testing and balancing of air-conditioning ductwork
systems within structures
NRS 042:2004 NUM 760 SANS 60335-2-88:2003 / IEC 60335-2-88:2002 NUM 627
Guide for the protection of electronic equipment against damaging Household and similar electrical appliances - Safety Part 2-88:
transients Particular requirements for humidifiers intended for use with
heating, ventilation, or air-conditioning systems
91.140.10 Central heating systems The wiring of premises Part 1: Low-voltage installations
________________________________________________________
SANS 61084-2-1:1996 / IEC 61084-2-1:1996 NUM 677
SANS 60335-2-51:2003 / IEC 60335-2-51:2002 NUM 622
Cable trunking and ducting systems for electrical installations Part
Household and similar electrical appliances - Safety Part 2-51: 2: Particular requirements Section 1: Cable trunking and ducting
Particular requirements for stationary circulation pumps for heating systems intended for mounting on walls or ceilings
and service water installations
SANS 62051:1999 / IEC 62051:1999 NUM 698
Electricity metering - Glossary of terms
91.140.30 Ventilation and air-conditioning
systems
SANS 62051-1:2005 / IEC TR 62051-1:2004 NUM 698
________________________________________________________
Electricity metering - Data exchange for meter reading, tariff and
SANS 1238:2005 NUM 129 load control - Glossary of terms Part 1: Terms related to data
Air-conditioning ductwork exchange with metering equipment using DLMS/COSEM
SANS 62053-22:2003 / IEC 62053-22:2003 NUM 698 NRS 009-6-3:1997 NUM 754
Electricity metering equipment (a.c.) - Particular requirements Part Electricity sales systems Part 6: Interface standards Section 3:
22: Static meters for active energy (classes 0,2 S and 0,5 S) System master station - Credit dispensing unit
SANS 62053-23:2003 / IEC 62053-23:2003 NUM 699 NRS 009-6-4:1998 NUM 754
Electricity metering equipment (a.c) - Particular requirements Part Electrical sales systems Part 6: Interface standards Section 4:
23: Static meters for reactive energy (classes 2 and 3) Data transfer by physical media - System master station - Credit
dispensing unit
SANS 62053-52:2006 / IEC 62053-52:2005 NUM 699
Electricity metering equipment (AC) - Particular requirements Part NRS 009-6-6:2002 NUM 755
52: Symbols Electricity sales systems Part 6: Interface standards Section 6:
Standard transfer specification/Credit dispensing unit - Electricity
SANS 62055-21:2006 / IEC 62055-21:2005 NUM 699 dispenser - Categories of token and transaction data fields
Electricity metering - Payment systems Part 21: Framework for
standardization NRS 009-6-7:2002 NUM 755
Electricity sales systems Part 6: Interface standards Section 7:
SANS 62055-31:2006 / IEC 62055-31:2005 NUM 699 Standard transfer specification/ Credit dispensing unit - Electricity
Electricity metering - Payment systems Part 31: Particular dispenser - Token encoding and data encryption and decryption
requirements - Static payment meters for active energy (classes 1
and 2) NRS 009-6-8:1997 NUM 755
Electricity sales systems Part 6: Interface standards Section 8:
SANS 62055-41:2007 / IEC 62055-41:2007 NUM 699 Standard transfer specification/Disposable magnetic token
Electricity metering - Payment systems Part 41: Standard transfer technology - Token encoding format and physical token definition
specification (STS) - Application layer protocol for one-way token
carrier systems NRS 009-6-9:1997 NUM 755
Electricity sales systems Part 6: Interface standards Section 9:
SANS 62055-51:2007 / IEC 62055-51:2007 NUM 699 Standard transfer specification/Numeric token technology - Token
Electricity metering - Payment systems Part 51: Standard transfer encoding format and physical token definition
specification (STS) - Physical layer protocol for one-way numeric
and magnetic card token carriers NRS 009-7:1999 NUM 755
Electricity sales systems Part 7: Standard transfer specification/
SANS 62056-21:2003 / IEC 62056-21:2002 NUM 699 The management of cryptographic keys
Electricity metering - Data exchange for meter reading, tariff and
load control Part 21: Direct local data exchange NRS 009-8:2005 NUM 755
Electricity sales sytems Part 8: The management of secure
NRS 009-2-1:1998 NUM 753 modules
Electricity sales systems Part 2: Functional and performance
requirements Section 1: System master stations NRS 038-2:2001 NUM 759
Electricity distribution - Concrete poles Part 2: Concrete poles for
NRS 009-2-2:1995 NUM 753 lighting applications
Electricity sales systems Part 2: Functional and performance
requirements Section 2: Credit dispensing units NRS 047-1:2006 NUM 760
Electricity supply - Quality of service Part 1: Minimum standards
NRS 009-2-3:1998 NUM 754
Electricity sales systems Part 2: Functional and performance NRS 047-2:2001 NUM 760
requirements Section 3: Security module
Electricity supply - Quality of service Part 2: Reporting guidelines
NRS 009-2-4:1997 NUM 754
Electricity sales systems Part 2: Functional and performance NRS 048-2:2003 NUM 761
requirements Section 4: Standard token translators Electricity supply - Quality of supply Part 2: Voltage characteristics,
compatibility levels, limits and assessment methods
NRS 009-2-5:1997 NUM 754
Electricity sales systems Part 2: Functional and performance NRS 048-4:1999 NUM 761
requirements Section 5: Error handling Electricity supply - Quality of supply Part 4: Application guidelines
for utilities
NRS 009-3:2001 NUM 754
Electrical sales systems Part 3: Database format NRS 055:2000 NUM 762
Code of practice for revenue protection
NRS 009-4:2005 NUM 754
Electricity sales systems Part 4: National prepayment electricity NRS 057-4:2001 NUM 762
meter cards Electricity metering Part 4: Code of practice
NRS 009-5:1998 NUM 754
NRS 064:2005 NUM 763
Electricity sales systems Part 5: Testing of subsystems
Guidelines for the exchange of spatial information in the Electricity
Supply Industry
NRS 009-6-1:1997 NUM 754
Electricity sales systems Part 6: Interface standards - Section 1: NRS 070:2004 NUM 763
Credit dispensing unit - Standard token translator interface Quality of service standard for non-grid electricity customers
SANS 1529-1:2006 NUM 174 SANS 15874-2:2004 / ISO 15874-2:2003 NUM 534
Water meters for cold potable water Part 1: Metrological Plastics piping systems for hot and cold water installations -
characteristics of mechanical water meters of nominal bore not Polypropylene (PP) Part 2: Pipes
exceeding 100 mm
SANS 15874-3:2004 / ISO 15874-3:2003 NUM 534
SANS 1529-3:2006 NUM 174 Plastics piping systems for hot and cold water installations -
Water meters for cold potable water Part 3: Physical dimensions Polypropylene (PP) Part 3: Fittings
SANS 1808-85:2004 Plastics piping systems for hot and cold water installations -
NUM 229
Crosslinked polyethylene (PE-X) Part 2: Pipes
Water supply and distribution systems Part 85: Oriented polyvinyl
chloride (PVC-O) pressure pipes for underground use SANS 15875-3:2004 / ISO 15875-3:2003 NUM 535
SANS 4427:1996 / ISO 4427:1996 Plastics piping systems for hot and cold water installations -
NUM 266
Crosslinked polyethylene (PE-X) Part 3: Fittings
Polyethylene (PE) pipes for water supply - Specifications
SANS 15875-5:2004 / ISO 15875-5:2003 NUM 535
SANS 7491-2:1992 / BS 7491-2:1992 NUM 374 Plastics piping systems for hot and cold water installations -
Glass fibre reinforced plastics cisterns for cold-water storage Part Crosslinked polyethylene (PE-X) Part 5: Fitness for purpose of the
2: Specification for one-piece cisterns of nominal capacity from 500 system
l to 25 000 l
SANS 15876-1:2005 / ISO 15876-1:2003 NUM 535
SANS 7491-3:1994 / BS 7491-3:1994 NUM 374 Plastics piping systems for hot and cold water installations -
Glass fibre reinforced plastics cisterns for cold water storage Part Polybutylene (PB) Part 1: General
3: Specification for sectional tanks
SANS 15876-2:2005 / ISO 15876-2:2003 NUM 535
SANS 10120-2 TO 5 LF SET NUM 422 Plastics piping systems for hot and cold water installations -
Code of practice for use with standardized specifications for civil Polybutylene (PB) Part 2: Pipes
engineering construction and contract documents Parts 2 to 5
SANS 15876-3:2005 / ISO 15876-3:2003 NUM 535
Section: LF
Plastics piping systems for hot and cold water installations -
SANS 10120-2 LF:1983 NUM 427 Polybutylene (PB) Part 3: Fittings
Code of practice for use with standardized specifications for civil
SANS 15876-5:2005 / ISO 15876-5:2003 NUM 535
engineering construction and contract documents Part 2: Project
specification Section LF: Erf connections (water) Plastics piping systems for hot and cold water installations -
Polybutylene (PB) Part 5: Fitness for purpose of the system
SANS 10120-2 TO 5 LD SET Safety rules for the construction and installation of escalators and
NUM 421
passenger conveyors
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 SANS 1543:2006 NUM 176
Section LD: Sewers
Escalators and passenger conveyors
SANS 10120-2 TO 5 LE SET NUM 422
Code of practice for use with standardized specifications for civil SANS 1545-1:2006 NUM 176
engineering construction and contract documents Parts 2 to 5 Safety rules for the construction and installation of lifts Part 1:
Section LE: Stormwater drainage Electric lifts
SANS 1200 GB:1984 NUM 122 SANS 10120-2 TO 5 GB SET NUM 420
Standardized specification for civil engineering construction Section Code of practice for use with standardized specifications for civil
GB: Concrete (ordinary buildings) engineering construction and contract documents Parts 2 to 5
Section GB: Concrete (ordinary buildings)
SANS 1200 GE:1984 NUM 122
Standardized specification for civil engineering construction Section SANS 10120-2 TO 5 GE SET NUM 420
GE: Precast concrete (structural) Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5
SANS 1200 GF:1984 NUM 123 Section GE: Precast concrete (structural)
Standardized specification for civil engineering construction Section
GF: Prestressed concrete SANS 10120-2 TO 5 GF SET NUM 420
Code of practice for use with standardized specifications for civil
SANS 1200 H:1990 NUM 123 engineering construction and contract documents Parts 2 to 5
Standardized specification for civil engineering construction Section Section GF: Prestressed concrete
H: Structural steelwork
SANS 10120-2 TO 5 H SET NUM 420
SANS 1200 HA:1990 NUM 123 Code of practice for use with standardized specifications for civil
Standardized specification for civil engineering construction Section engineering construction and contract documents Parts 2 to 5
HA: Structural steelwork (sundry items) Section H: Structural steelwork
SANS 1200 HB:1985 NUM 123 SANS 10120-2 TO 5 HA SET NUM 421
Standardized specification for civil engineering construction Section Code of practice or use with standardized specifications for civil
HB: Cladding and sheeting engineering construction and contract documents Parts 2 to 5
Section HA: Structural steelwork (sundry items)
SANS 1200 HC:1988 NUM 123
SANS 10120-2 TO 5 HB SET NUM 421
Standardized specification for civil engineering construction Section
HC: Corrosion protection of structural steelwork Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5
SANS 1200 HE:1983 NUM 123 Section HB: Cladding and sheeting
Standardized specification for civil engineering construction Section SANS 10120-2 TO 5 HC SET NUM 421
HE: Structural aluminiumwork
Code of practice for use with standardized specifications for civil
SANS 2001-CS1:2005 NUM 243 engineering construction and contract documents Parts 2 to 5
Section HC: Corrosion protection of structural steelwork
Construction works Part CS1: Structural steelwork
SANS 10120-2 TO 5 HE SET NUM 421
SANS 10120 SET NUM 418 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Parts 2 to 5
engineering construction and contract documents. (All parts Section HE: Structural aluminiumwork
included. Only available as hardcopy or CD-ROM)
SANS 10120-2 INTRO:1986 NUM 423
SANS 10120-1:1986 NUM 418 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project
engineering construction and contract documents Part 1: Format specification, Introduction
and contents
SANS 10120-2 A:1986 NUM 423
SANS 10120-2 TO 5 INT SET NUM 418 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project
engineering construction and contract documents Parts 2 to 5 specification Section A: General
Introduction
SANS 10120-2 AB:1986 NUM 424
SANS 10120-2 TO 5 A SET NUM 418 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project
engineering construction and contract documents Parts 2 to 5 specification Section AB: Engineer's office
Section A : General
SANS 10120-2 AH:1986 NUM 424
SANS 10120-2 TO 5 AB SET NUM 418 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project
engineering construction and contract documents Parts 2 to 5 specification Section AH: General (structural)
Section AB: Engineer's office
SANS 10120-2 G:1982 NUM 425
SANS 10120-2 TO 5 AH SET NUM 419 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project
engineering construction and contract documents Parts 2 to 5 specification Section G: Concrete (structural)
Section AH: General (structural)
SANS 10120-2 GB:1984 NUM 425
SANS 10120-2 TO 5 G SET NUM 420 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project
engineering construction and contract documents Parts 2 to 5 specification Section GB: Concrete (ordinary buildings)
Section G: Concrete (structural)
SANS 10120-2 GE:1984 NUM 426 SANS 10120-3 GF:1984 NUM 431
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section GE: Precast concrete (structural) for design Section GF: Prestressed concrete
SANS 10120-2 GF:1984 NUM 426 SANS 10120-3 H:1990 NUM 431
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section GF: Prestressed concrete for design Section H: Structural steelwork
SANS 10120-2 H:1990 NUM 426 SANS 10120-3 HA:1990 NUM 431
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification H: Structural steelwork for design Section HA: Structural steelwork (sundry items)
SANS 10120-2 HA:1990 NUM 426 SANS 10120-3 HB:1985 NUM 431
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification HA: Structural steelwork (sundry items) for design Section HB: Cladding and sheeting
SANS 10120-2 HB:1985 NUM 426 SANS 10120-3 HC:1988 NUM 431
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section HB: Cladding and sheeting for design Section HC: Corrosion protection of structural steelwork
SANS 10120-2 HC:1988 NUM 426 SANS 10120-3 HE:1983 NUM 432
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section HC: Corrosion protection of structural for design Section HE: Structural aluminiumwork
steelwork
SANS 10120-4 INTRO:1986 NUM 434
SANS 10120-2 HE:1983 NUM 426 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 2: Project schedule of quantities, Introduction
specification Section HE: Structural aluminiumwork
SANS 10120-4 A:1986 NUM 434
SANS 10120-3 INTRO:1986 NUM 429 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 3: Guidance schedule of quantities Section A: General
for design, Introduction
SANS 10120-4 AB:1982 NUM 434
SANS 10120-3 A:1986 NUM 429 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 3: Guidance schedule of quantities Section AB: Engineer's office
for design Section A: General
SANS 10120-4 AH:1983 NUM 434
SANS 10120-3 AB:1986 NUM 429 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 3: Guidance schedule of quantities Section AH: General (structural)
for design Section AB: Engineer's office
SANS 10120-4 G:1982 NUM 436
SANS 10120-3 AH:1983 NUM 429 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 3: Guidance schedule of quantities Section G: Concrete (structural)
for design Section AH: General (structural)
SANS 10120-4 GB:1984 NUM 436
SANS 10120-3 G:1982 NUM 430 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 3: Guidance schedule of quantities Section GB: Concrete (ordinary buildings)
for design Section G: Concrete (structural)
SANS 10120-4 GE:1984 NUM 436
SANS 10120-3 GB:1984 NUM 431 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 3: Guidance schedule of quantities Section GE: Precast concrete (structural)
for design Section GB: Concrete (ordinary buildings)
SANS 10120-4 GF:1984 NUM 436
SANS 10120-3 GE:1984 NUM 431 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical
engineering construction and contract documents Part 3: Guidance schedule of quantities Section GF: Prestressed concrete
for design Section GE: Precast concrete (structural)
SANS 10120-4 H:1990 NUM 436 SANS 10120-5 HA:1990 NUM 442
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 5: Contract
schedule of quantities Section H: Structural steelwork administration Section HA: Structural steelwork (sundry items)
SANS 10120-4 HA:1990 NUM 436 SANS 10120-5 HB:1985 NUM 442
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 5: Contract
schedule of quantities Section HA: Structural steelwork (sundry administration Section HB: Cladding and sheeting
items)
SANS 10120-5 HC:1988 NUM 442
SANS 10120-4 HB:1985 NUM 437 Code of practice for use with standardized specifications for civil
Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract
engineering construction and contract documents Part 4: Typical administration Section HC: Corrosion protection of structural
schedule of quantities Section HB: Cladding and sheeting steelwork
SANS 10120-4 HC:1988 NUM 437 SANS 10120-5 HE:1983 NUM 442
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 5: Contract
schedule of quantities Section HC: Corrosion protection of administration Section HE: Structural aluminiumwork
structural steelwork
SANS 10120-5 AH:1983 NUM 440 SANS 1200 C:1980 NUM 121
Code of practice for use with standardized specifications for civil Standardized specification for civil engineering construction Section
engineering construction and contract documents Part 5: Contract C: Site clearance
administration Section AH: General (structural)
SANS 1200 D:1988 NUM 121
SANS 10120-5 G:1982 NUM 441 Standardized specification for civil engineering construction Section
Code of practice for use with standardized specifications for civil D: Earthworks
engineering construction and contract documents Part 5: Contract
administration Section G: Concrete (structural) SANS 1200 DA:1988 NUM 121
Standardized specification for civil engineering construction Section
SANS 10120-5 GB:1984 NUM 441 DA: Earthworks (small works)
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 5: Contract SANS 1200 DB:1989 NUM 121
administration Section GB: Concrete (ordinary buildings) Standardized specification for civil engineering construction Section
DB: Earthworks (pipe trenches)
SANS 10120-5 GE:1984 NUM 441
Code of practice for use with standardized specifications for civil SANS 1200 DE:1984 NUM 121
engineering construction and contract documents Part 5: Contract Standardized specification for civil engineering construcion Section
administration Section GE: Precast concrete (structural) DE: Small earth dams
SANS 10120-5 GF:1984 NUM 442 SANS 1200 DK:1996 NUM 122
Code of practice for use with standardized specifications for civil Standardized specification for civil engineering construction Section
engineering construction and contract documents Part 5: Contract DK: Gabions and pitching
administration Section GF: Prestressed concrete
SANS 1200 DM:1981 NUM 122
SANS 10120-5 H:1990 NUM 442
Standardized specification for civil engineering construction Section
Code of practice for use with standardized specifications for civil DM: Earthworks (roads, subgrade)
engineering construction and contract documents Part 5: Contract
administration Section H: Structural steelwork SANS 1200 DN:1982 NUM 122
Standardized specification for civil engineering construction Section
DN: Earthworks (railway sidings)
SANS 1200 F:1983 NUM 122 SANS 10120-2 TO 5 DB SET NUM 419
Standardized specification for civil engineering construction Section Code of practice for use with standardized specifications for civil
F: Piling engineering construction and contract documents Parts 2 to 5
Section DB: Earthworks (pipe trenches)
SANS 1200 GA:1982 NUM 122
Standardized specification for civil engineering construction Section SANS 10120-2 TO 5 DE SET NUM 419
GA: Concrete (small works) Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5
SANS 1200 L:1983 NUM 123 Section DE: Small earth dams
Standardized specification for civil engineering construction Section
L: Medium-pressure pipe lines SANS 10120-2 TO 5 DK SET NUM 419
Code of practice for use with standardized specifications for civil
SANS 1200 LB:1983 NUM 123 engineering construction and contract documents Parts 2 to 5
Standardized specification for civil engineering construction Section Section DK: Gabions and pitching
LB: Bedding (pipes)
SANS 10120-2 TO 5 DM SET NUM 419
SANS 1200 LC:1981 NUM 124 Code of practice for use with standardized specifications for civil
Standardized specification for civil engineering construction Section engineering construction and contract documents Parts 2 to 5
LC: Cable ducts Section DM: Earthworks (roads, subgrade)
SANS 1200 LD:1982 NUM 124 SANS 10120-2 TO 5 DN SET NUM 420
Standardized specification for civil engineering construction Section Code of practice for use with standardized specifications for civil
LD: Sewers engineering construction and contract documents Parts 2 to 5
Section DN: Earthworks (railway sidings)
SANS 1200 LE:1982 NUM 124
SANS 10120-2 TO 5 F SET NUM 420
Standardized specification for civil engineering construction Section
LE: Stormwater drainage Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5
SANS 1200 LF:1983 NUM 124 Section F: Piling
Standardized specification for civil engineering construction Section SANS 10120-2 TO 5 GA SET NUM 420
LF: Erf connections (water)
Code of practice for use with standardized specifications for civil
SANS 1200 LG:1983 NUM 124 engineering construction and contract documents Parts 2 to 5
Section GA: Concrete (small works)
Standardized specification for civil engineering construction Section
LG: Pipe jacking SANS 10120-2 TO 5 L SET NUM 421
SANS 1580:2005 NUM 182 Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5
Hexagonal steel wire mesh gabions and revet mattresses
Section L: Medium-pressure pipelines
SANS 10120 SET NUM 418 SANS 10120-2 TO 5 LB SET NUM 421
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents. (All parts engineering construction and contract documents Parts 2 to 5
included. Only available as hardcopy or CD-ROM) Section LB: Bedding (pipes)
SANS 10120-2 TO 5 AA SET NUM 418 SANS 10120-2 TO 5 LC SET NUM 421
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 engineering construction and contract documents Parts 2 to 5
Section AA: General (small works) Section LC: Cable ducts
SANS 10120-2 TO 5 AD SET NUM 418 SANS 10120-2 TO 5 LD SET NUM 421
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 engineering construction and contract documents Parts 2 to 5
Section AD: General (small dams) Section LD: Sewers
SANS 10120-2 TO 5 C SET NUM 419 SANS 10120-2 TO 5 LE SET NUM 422
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 engineering construction and contract documents Parts 2 to 5
Section C: Site clearance Section LE: Stormwater drainage
SANS 10120-2 TO 5 D SET NUM 419 SANS 10120-2 TO 5 LF SET NUM 422
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 engineering construction and contract documents Parts 2 to 5
Section D: Earthworks Section: LF
SANS 10120-2 TO 5 DA SET NUM 419 SANS 10120-2 TO 5 LG SET NUM 422
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Parts 2 to 5 engineering construction and contract documents Parts 2 to 5
Section DA: Earthworks (small works) Section LG: Pipe jacking
SANS 10120-2 AA:1986 NUM 423 SANS 10120-2 LC:1981 NUM 427
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 2: Project
specification Section AA: General (small works) specification Section LC: Cable ducts
SANS 10120-2 AD:1986 NUM 424 SANS 10120-2 LD:1982 NUM 427
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 2: Project
specification Section AD: General (small dams) specification Section LD: Sewers
SANS 10120-2 C:1982 NUM 424 SANS 10120-2 LE:1982 NUM 427
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 2: Project
specification Section C: Site clearance specification Section LE: Stormwater drainage
SANS 10120-2 D:1982 NUM 424 SANS 10120-2 LF:1983 NUM 427
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 2: Project
specification Section D: Earthworks specification Section LF: Erf connections (water)
SANS 10120-2 DA:1982 NUM 424 SANS 10120-2 LG:1983 NUM 427
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 2: Project
specification Section DA: Earthworks (small works) specification Section LG: Pipe jacking
SANS 10120-2 DB:1982 NUM 424 SANS 10120-3 AA:1982 NUM 429
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section DB: Earthworks (pipe trenches) for design Section AA: General (small works)
SANS 10120-2 DE:1984 NUM 425 SANS 10120-3 AD:1986 NUM 429
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section DE: Small earth dams for design Section AD: General (small dams)
SANS 10120-2 DK:1996 NUM 425 SANS 10120-3 C:1982 NUM 429
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section DK: Gabions and pitching for design Section C: Site clearance
SANS 10120-2 DM:1981 NUM 425 SANS 10120-3 D:1982 NUM 429
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section DM: Earthworks (roads, subgrade) for design Section D: Earthworks
SANS 10120-2 DN:1982 NUM 425 SANS 10120-3 DA:1982 NUM 430
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section DN: Earthworks (railway sidings) for design Section DA: Earthworks (small works)
SANS 10120-2 F:1983 NUM 425 SANS 10120-3 DB:1982 NUM 430
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section F: Piling for design Section DB: Earthworks (pipe trenches)
SANS 10120-2 GA:1982 NUM 425 SANS 10120-3 DE:1984 NUM 430
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section GA: Concrete (small works) for design Section DE: Small earth dams
SANS 10120-2 L:1983 NUM 426 SANS 10120-3 DK:1996 NUM 430
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section L: Medium-pressure pipelines for design Section DK: Gabions and pitching
SANS 10120-2 LB:1983 NUM 427 SANS 10120-3 DM:1981 NUM 430
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 3: Guidance
specification Section LB: Bedding (pipes) for design Section DM: Earthworks (roads, subgrade)
SANS 10120-3 DN:1982 NUM 430 SANS 10120-4 DA:1982 NUM 435
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section DN: Earthworks (railway sidings) schedule of quantities Section DA: Earthworks (small works)
SANS 10120-3 F:1983 NUM 430 SANS 10120-4 DB:1982 NUM 435
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section F: Piling schedule of quantities Section DB: Earthworks (pipe trenches)
SANS 10120-3 GA:1982 NUM 431 SANS 10120-4 DE:1984 NUM 435
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section GA: Concrete (small works) schedule of quantities Section DE: Small earth dams
SANS 10120-3 L:1983 NUM 432 SANS 10120-4 DK:1984 NUM 435
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section L: Medium-pressure pipelines schedule of quantities Section DK: Gabions and pitching
SANS 10120-3 LB:1983 NUM 432 SANS 10120-4 DM:1981 NUM 435
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section LB: Bedding (pipes) schedule of quantities Section DM: Earthworks (roads, subgrade)
SANS 10120-3 LC:1981 NUM 432 SANS 10120-4 DN:1982 NUM 435
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section LC: Cable ducts schedule of quantities Section DN: Earthworks (railway sidings)
SANS 10120-3 LD:1982 NUM 432 SANS 10120-4 F:1983 NUM 436
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section LD: Sewers schedule of quantities Section F: Piling
SANS 10120-3 LE:1982 NUM 432 SANS 10120-4 GA:1982 NUM 436
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section LE: Stormwater drainage schedule of quantities Section GA: Concrete (small works)
SANS 10120-3 LF:1983 NUM 432 SANS 10120-4 L:1983 NUM 437
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section LF: Erf connections (water) schedule of quantities Section L: Medium-pressure pipelines
SANS 10120-3 LG:1983 NUM 432 SANS 10120-4 LB:1983 NUM 437
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance engineering construction and contract documents Part 4: Typical
for design Section LG: Pipe jacking schedule of quantities Section LB: Bedding (pipes)
SANS 10120-4 AA:1982 NUM 434 SANS 10120-4 LC:1981 NUM 437
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 4: Typical
schedule of quantities Section AA: General (small works) schedule of quantities Section LC: Cable ducts
SANS 10120-4 AD:1984 NUM 434 SANS 10120-4 LD:1982 NUM 437
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 4: Typical
schedule of quantities Section AD: General (small dams) schedule of quantities Section LD: Sewers
SANS 10120-4 C:1982 NUM 435 SANS 10120-4 LE:1982 NUM 437
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 4: Typical
schedule of quantities Section C: Site clearance schedule of quantities Section LE: Stormwater drainage
SANS 10120-4 D:1982 NUM 435 SANS 10120-4 LF:1983 NUM 438
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 4: Typical
schedule of quantities Section D: Earthworks schedule of quantities Section LF: Erf connections (water)
SANS 10120-4 LG:1983 NUM 438 SANS 10120-5 LB:1983 NUM 442
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical engineering construction and contract documents Part 5: Contract
schedule of quantities Section LG: Pipe jacking administration Section LB: Bedding (pipes)
SANS 10120-5 AA:1982 NUM 439 SANS 10120-5 LC:1981 NUM 443
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 5: Contract engineering construction and contract documents Part 5: Contract
administration Section AA: General (small works) administration Section LC: Cable ducts
SANS 10120-5 AD:1986 NUM 440 SANS 10120-5 LD:1982 NUM 443
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 5: Contract engineering construction and contract documents Part 5: Contract
administration Section AD: General (small dams) administration Section LD: Sewers
SANS 10120-5 C:1982 NUM 440 SANS 10120-5 LE:1982 NUM 443
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 5: Contract engineering construction and contract documents Part 5: Contract
administration Section C: Site clearance administration Section LE: Stormwater drainage
SANS 10120-5 D:1982 NUM 440 SANS 10120-5 LF:1983 NUM 443
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 5: Contract engineering construction and contract documents Part 5: Contract
administration Section D: Earthworks administration Section LF: Erf connections (water)
SANS 10120-5 DA:1982 NUM 440 SANS 10120-5 LG:1983 NUM 443
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 5: Contract engineering construction and contract documents Part 5: Contract
administration Section DA: Earthworks (small works) administration Section LG: Pipe jacking
SANS 10120-5 F:1983 NUM 441 93.025 External water conveyance systems
Code of practice for use with standardized specifications for civil ________________________________________________________
engineering construction and contract documents Part 5: Contract
SANS 10306:1999 NUM 475
administration Section F: Piling
The management of potable water in distribution systems
SANS 10120-5 GA:1982 NUM 441
Code of practice for use with standardized specifications for civil ARP 060:2004 NUM 722
engineering construction and contract documents Part 5: Contract
Guidance on the use and application of hot-dip galvanized steel
administration Section GA: Concrete (small works)
piping for the transportation of potable water in South Africa
SANS 10120-5 L:1983 NUM 442
Code of practice for use with standardized specifications for civil 93.040 Bridge construction
engineering construction and contract documents Part 5: Contract
________________________________________________________
administration Section L: Medium-pressure pipelines
SANS 1806:2005 NUM 226
Structural bearings - Bridge bearings - Materials, manufacture and
installation
SANS 6446:2005 / ISO 6446:1994 NUM 365 SANS 1555:1992 NUM 179
Rubber products - Bridge bearings - Specification for rubber Road-works delineators
materials
SANS 10120-2 MFL:1996 NUM 428 SANS 10120-5 MH:1996 NUM 444
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 5: Contract
specification Section MFL: Base (light pavement structures) administration Section MH: Asphalt base and surfacing
SANS 10120-2 MG:1996 NUM 428 SANS 10120-5 MJ:1984 NUM 444
Code of practice for use with standardized specifications for civil Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project engineering construction and contract documents Part 5: Contract
specification Section MG: Bituminous surface treatment administration Section MJ: Segmented paving
SANS 10120-2 MH:1996 NUM 428 SANS 51423:1997 / EN 1423:1997 NUM 588
Code of practice for use with standardized specifications for civil Road marking materials - Drop on materials - Glass beads, antiskid
engineering construction and contract documents Part 2: Project aggregates and mixtures of the two
specification Section MH: Asphalt base and surfacing
SANS 51424:1997 / EN 1424:1997 NUM 588
SANS 10120-2 MJ:1984 NUM 428 Road marking materials - Premix glass beads
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 2: Project
specification Section MJ: Segmented paving
93.080.30 Road equipment and installations
SANS 10120-3 MFL:1996 NUM 433 ________________________________________________________
Code of practice for use with standardized specifications for civil SANS 972-1:2005 NUM 95
engineering construction and contract documents Part 3: Guidance
for design Section MFL: Base (light pavement structures) Signs for street and property identification Part 1: Retro-reflective
signs
SANS 10120-3 MG:1996 NUM 433
SANS 972-2:2004 NUM 96
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 3: Guidance Signs for street and property identification Part 2: Non-retro-
for design Section MG: Bituminous surface treatment reflective signs
SANS 10120-4 MG:1981 Road signs Part 2: Performance requirements for road signs
NUM 438
Code of practice for use with standardized specifications for civil
engineering construction and contract documents Part 4: Typical SANS 1547:2005 NUM 177
schedule of quantities Section MG: Bituminous surface treatment Traffic signal controllers
SANS 10120-5 MFL:1996 NUM 444 Public lighting Part 1: The lighting of public thoroughfares
93.080.40 Street lighting and related equipment SANS 10120-4 NB:1981 NUM 439
________________________________________________________ Code of practice for use with standardized specifications for civil
SANS 1459:2004 NUM 163 engineering construction and contract documents Part 4: Typical
schedule of quantities Section NB: Railway sidings (trackwork)
Traffic lights
SANS 10120-5 DN:1982 NUM 441
SANS 1777:2004 NUM 223 Code of practice for use with standardized specifications for civil
Photoelectric control units for lighting (PECUs) engineering construction and contract documents Part 5: Contract
administration Section DN: Earthworks (railway sidings)
Luminaires Part 2-3: Particular requirements - Luminaires for road SANS 10335:1999 NUM 478
and street lighting
The installation, maintenance and safe use of overhead monorail
ARP 035:2007 NUM 721 transport systems for underground use
Guidelines for the installation and maintenance of street lighting SANS 10339:2006 NUM 479
Underground rail trackwork in mines
SANS 60734:2006 / IEC 60734:2001 NUM 644 97.040.20 Cooking ranges, working tables,
Household electrical appliances - Performance - Hard water for ovens and similar appliances
testing ________________________________________________________
SANS 153:2006 NUM 22
97.030 Domestic electrical appliances in Electric stoves, cooking tops, ovens, grills, and similar appliances
general
________________________________________________________ SANS 154:2005 NUM 22
SANS 60335-2-17:2003 / IEC 60335-2-17:2002 NUM 618 Electric cooking plates and surface unit heaters
Household and similar electrical appliances - Safety Part 2-17:
Particular requirements for blankets, pads and similar flexible SANS 1111:1976 NUM 109
heating appliances Coal-burning appliances (reduced smoke emission type)
SANS 60335-2-66:2003 / IEC 60335-2-66:2002 NUM 624 SANS 1502:2006 NUM 169
Household and similar electrical appliances - Safety Part 2-66: Microwave cooking appliances for domestic use
Particular requirements for water-bed heaters
SANS 60335-2-81:2007 / IEC 60335-2-81:2007 NUM 626 SANS 1539:2006 NUM 175
Household and similar electrical appliances - Safety Part 2-81: Appliances operating on liquefied petroleum gas - Safety aspects
Particular requirements for foot warmers and heating mats
SANS 60335-2-6:2006 / IEC 60335-2-6:2005 NUM 616
SANS 60335-2-83:2003 / IEC 60335-2-83:2001 NUM 626
Household and similar electrical appliances - Safety Part 2-6:
Household and similar electrical appliances - Safety Part 2-83:
Particular requirements for stationary cooking ranges, hobs, ovens
Particular requirements for heated gullies for roof drainage
and similar appliances
SANS 60335-2-88:2003 / IEC 60335-2-88:2002 NUM 627 SANS 60335-2-9:2004 / IEC 60335-2-9:2004 NUM 617
Household and similar electrical appliances - Safety Part 2-88:
Household and similar electrical appliances - Safety Part 2-9:
Particular requirements for humidifiers intended for use with
Particular requirements for grills, toasters and similar portable
heating, ventilation, or air-conditioning systems
cooking appliances
SANS 60335-2-96:2006 / IEC 60335-2-96:2005 NUM 628 SANS 60335-2-13:2005 / IEC 60335-2-13:2004 NUM 617
Household and similar electrical appliances - Safety Part 2-96:
Household and similar electrical appliances - Safety Part 2-13:
Particular requirements for flexible sheet heating elements for room
Particular requirements for deep fat fryers, frying pans and similar
heating
appliances
SANS 60335-2-98:2005 / IEC 60335-2-98:2005 NUM 628 SANS 60335-2-25:2006 / IEC 60335-2-25:2005 NUM 618
Household and similar electrical appliances - Safety Part 2-98:
Household and similar electrical appliances - Safety Part 2-25:
Particular requirements for humidifiers
Particular requirements for microwave ovens, including
SANS 60335-2-101:2003 / IEC 60335-2-101:2002 combination microwave ovens
NUM 629
Household and similar electrical appliances - Safety Part 2-101: SANS 60335-2-31:2003 / IEC 60335-2-31:2002 NUM 619
Particular requirements for vaporizers
Household and similar electrical appliances - Safety Part 2-31:
SANS 62233:2006 / IEC 62233:2005 Particular requirements for range hoods
NUM 702
Measurement methods for electromagnetic fields of household SANS 60335-2-36:2006 / IEC 60335-2-36:2005 NUM 620
appliances and similar apparatus with regard to human exposure
Household and similar electrical appliances - Safety Part 2-36:
VC 8055:1996 Particular requirements for commercial electric cooking ranges,
NUM 771
ovens, hobs and hob elements
Electrical and electronic apparatus
SANS 60335-2-37:2003 / IEC 60335-2-37:2002 NUM 620
Household and similar electrical appliances - Safety Part 2-37:
97.040.01 Kitchen equipment in general Particular requirements for commercial electric deep fat fryers
________________________________________________________ SANS 60335-2-38:2003 / IEC 60335-2-38:2002
NUM 620
SANS 1850:2003 NUM 235 Household and similar electrical appliances - Safety Part 2-38:
The design and manufacture of commercial kitchen extraction Particular requirements for commercial electric griddles and griddle
systems grills
SANS 60335-2-47:2003 / IEC 60335-2-47:2002 NUM 621 SANS 1163:1977 NUM 116
Household and similar electrical appliances - Safety Part 2-47: Detergent for domestic dishwashing machines
Particular requirements for commercial electric boiling pans
SANS 60335-2-50:2003 / IEC 60335-2-50:2002 NUM 621 SANS 5792:1974 NUM 315
Household and similar electrical appliances - Safety Part 2-50: Resistance of crockery to crazing
Particular requirements for commercial electric bains-marie
SANS 5791:1974 NUM 315 SANS 10472-1:1997 / ISO 10472-1:1997 NUM 486
Resistance of saucers and plates to chipping Safety requirements for industrial laundry machinery Part 1:
Common requirements
SANS 10472-2:1997 / ISO 10472-2:1997 NUM 486 SANS 1582-1:2006 NUM 182
Safety requirements for industrial laundry machinery Part 2: Light industrial electric floor treatment machines Part 1: Vacuum
Washing machines and washer-extractors cleaners
SANS 10472-3:1997 / ISO 10472-3:1997 NUM 486 SANS 1582-2:2006 NUM 183
Safety requirements for industrial laundry machinery Part 3: Light industrial electric floor treatment machines Part 2: Floor
Washing tunnel lines including component machines polishers
SANS 10472-4:1997 / ISO 10472-4:1997 NUM 486 SANS 60335-2-2:2005 / IEC 60335-2-2:2004 NUM 616
Safety requirements for industrial laundry machinery Part 4: Air Household and similar electrical appliances - Safety Part 2-2:
dryers Particular requirements for vacuum cleaners and water-suction
cleaning appliances
SANS 10472-5:1997 / ISO 10472-5:1997 NUM 486
Safety requirements for industrial laundry machinery Part 5: SANS 60335-2-10:2003 / IEC 60335-2-10:2002 NUM 617
Flatwork ironers, feeders and folders Household and similar electrical appliances - Safety Part 2-10:
Particular requirements for floor treatment machines and wet
SANS 10472-6:1997 / ISO 10472-6:1997 NUM 486 scrubbing machines
Safety requirements for industrial laundry machinery Part 6: Ironing
and fusing presses SANS 60335-2-54:2007 / IEC 60335-2-54:2007 NUM 622
Household and similar electrical appliances - Safety Part 2-54:
SANS 60311:2003 / IEC 60311:2002 NUM 612 Particular requirements for surface-cleaning appliances for
Electric irons for household or similar use - Methods for measuring household use employing liquids or steam
performance
SANS 60335-2-67:2003 / IEC 60335-2-67:2002 NUM 624
SANS 60335-2-3:2006 / IEC 60335-2-3:2005 NUM 616 Household and similar electrical appliances - Safety Part 2-67:
Household and similar electrical appliances - Safety Part 2-3: Particular requirements for floor treatment and floor cleaning
Particular requirements for electric irons machines, for industrial and commercial use
SANS 60335-2-4:2006 / IEC 60335-2-4:2006 NUM 616 SANS 60335-2-68:2007 / IEC 60335-2-68:2007 NUM 624
Household and similar electrical appliances - Safety Part 2-4: Household and similar electrical appliances - Safety Part 2-68:
Particular requirements for spin extractors Particular requirements for spray extraction appliances, for
industrial and commercial use
SANS 60335-2-7:2006 / IEC 60335-2-7:2006 NUM 616
SANS 60335-2-69:2006 / IEC 60335-2-69:2005 NUM 624
Household and similar electrical appliances - Safety Part 2-7:
Particular requirements for washing machines Household and similar electrical appliances - Safety Part 2-69:
Particular requirements for wet and dry vacuum cleaners, including
SANS 60335-2-11:2003 / IEC 60335-2-11:2003 NUM 617 power brush, for industrial and commercial use
Household and similar electrical appliances - Safety Part 2-11: SANS 60335-2-72:2003 / IEC 60335-2-72:2002 NUM 625
Particular requirements for tumble dryers
Household and similar electrical appliances - Safety Part 2-72:
SANS 60335-2-43:2003 / IEC 60335-2-43:2002 NUM 621 Particular requirements for automatic machines for floor treatment
for commercial and industrial use
Household and similar electrical appliances - Safety Part 2-43:
Particular requirements for clothes dryers and towel rails SANS 60335-2-79:2006 / IEC 60335-2-79:2005 NUM 626
SANS 60335-2-44:2003 / IEC 60335-2-44:2002 NUM 621 Household and similar electrical appliances - Safety Part 2-79:
Particular requirements for high pressure cleaners and steam
Household and similar electrical appliances - Safety Part 2-44:
cleaners
Particular requirements for ironers
97.100.40 Liquid fuel heaters SANS 60730-2-10:2007 / IEC 60730-2-10:2006 NUM 643
________________________________________________________ Automatic electrical controls for household and similar use Part 2-
10: Particular requirements for motor-starting relays
SANS 1906:2006 NUM 239
Non-pressure paraffin stoves and heaters SANS 60730-2-11:2007 / IEC 60730-2-11:2006 NUM 643
Automatic electrical controls for household and similar use Part 2-
VC 9089:2006 NUM 773 11: Particular requirements for energy regulators
Compulsory specification for non-pressure paraffin stoves and
heaters
SANS 1581:2006 NUM 182 SANS 11540:1993 / ISO 11540:1993 NUM 496
Erasers made from plasticized PVC Caps for writing and marking instruments intended for use by
children up to 14 years of age - Safety requirements
SANS 9177-2:1989 / ISO 9177-2:1989 NUM 395 SANS 1531:2003 NUM 175
Mechanical pencils Part 2: Black leads - Classification and Wood-cased pencils and extruded plastics pencils, with graphite
dimensions lead and coloured lead
SANS 8124-2:1994 / ISO 8124-2:1994 NUM 381 SANS 10209:2003 NUM 459
Safety of toys Part 2: Flammability The design and construction of private swimming pools