Professional Documents
Culture Documents
Wear Protection 1
Bulldozers / Compactors 2
Excavators 3
Underground Mining 8
Paving Products 9
Motor Graders 10
Rippers / Scarifiers 11
Scrapers 12
For updates to this book, please visit our website on Infocast: https://nacd.cat.com/infocast/frames/prodsupp/get/
4Q2010 1
Introduction
This Ground Engaging Tools Parts Sales Kit (GET) is designed to provide
dealer salespeople (field and instore) with part numbers and product infor-
mation as well as features and benefits for selected parts and service prod-
ucts. It is a quick reference tool which lists part numbers and applications
for items that are: new, competitive and high in sales volume and sales
potential.
The GET PSK should not be used as a substitute for Parts Books,
Numerical Parts Record, Parts Pricing Medium or any other formal
reference publication. All part numbers, specifications and application
data published in the GET PSK are subject to change without notice. Any
information taken from this publication for use in preparing a Parts
Sales Order or Price Quotation should always be verified against the
Numerical Parts Record in accordance with the Management Partsgram
entitled “The Numerical Parts Record.”
The tab index enables users to quickly locate various sections in the GET
PSK. Users are urged to use the GET PSK consistently to help ensure close
familiarity with the vast amount of part numbers and product information.
This book supports the Caterpillar® Ground Engaging Tools for loader
buckets, excavator buckets, rippers, bulldozer blades and scraper bowls on
either competitive or Caterpillar machines. The function of the program is
to increase customer satisfaction and GET component sales by making
available a consistent, high-quality GET product line for all machines.
• The service/welding shop will also find many uses for this guide.
NOTE: For a detailed list of serial number equivalent information, see Serial
Number Index, Form No. SEBF9451. This Equivalent Serial Number
Guide covers Caterpillar machines from 1955.
2 4Q2010 PECJ0036-01
Wear Protection
4Q2010 1-1
Wear Protection
WELD-ON HALF-ARROW EDGES / WELD-ON HEEL SHROUDS
Weld-on half-arrow edges protect the bucket structure by adding more wear T
material to the base edge, and they will fit other brand buckets. H
The weld-on half-arrow edges can be used to customize loader buckets. For
example, they could be used as sidecutters on bucket side bars to improve pene- W
tration, or welded between bucket teeth to reduce scalloping. Before welding
half-arrow sections between bucket teeth, be sure to check for tip and pin hole B
clearance. This is a concern primarily when using bottom strap adapters.
Options
W T H B Overall Length
Part No. in. mm in. mm in. mm in. mm feet mm
134-1774 4 101 0.43 11 0.40 10 0.14 3.5 8 2438
134-1776 6 151 0.63 16 0.60 16 0.22 5.5 8 2438
8J-8141 8 203 0.75 19 0.50 13 0.16 4.0 12 3658
8J-8176 10 254 1.10 28 1.10 29 0.44 11 12 3658
6Y-2107 10 254 1.60 40 1.20 30 1.00 25 12 3658
109-2696 10 254 1.60 40 1.20 30 1.00 25 18 5486
132-1013 11.6 295 1.77 45 1.34 34 0.47 12 3.3 1000
Weld-on heel shrouds protect the lower outside corner of all types of Caterpillar
and other brand buckets. Protection is given to the bottom and the side of the
bucket with extra wear material concentrated in the corner where it’s needed most.
Straight and curved heel shrouds are available in two different sizes to best match
bucket contour and size, and abrasiveness of the application. The inside corner is
relieved to eliminate interference with the bucket structure. Shrouds need not be
placed tightly together. They can be spaced apart and still provide full protection
due to ‘shadowing.’ Weld-on heel shrouds are especially applicable for LHEX and
underground LHD buckets.
For high wear applications Caterpillar’s Mechanically Attached Wear Plate System
(MAWPS) should be considered due to their quick change design. However, for B
moderate wear applications and sites especially concerned about mechanically
fastened parts these weld-on heel shrouds are an excellent option to consider.
Weight A B C D E F G H R A
lb in in in in in in in in in
Part No. Type (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
157-1019 straight 68.4 9.8 7.9 — 10.6 2.0 1.8 1.2 7.9 — C
(31.0) (250) (200) (270) (50) (45) (30) (200)
157-1027 curved 63.1 9.8 7.9 7.6 10.6 2.0 1.8 1.2 7.9 31.5
(28.6) (250) (200) (193) (270) (50) (45) (30) (200) (800) R
138-6529 straight 30.4 6.9 5.9 — 8.1 1.6 1.4 1.0 5.9 —
(13.8) (175) (150) (205) (40) (35) (25) (150)
138-6551 curved 29.5 6.9 5.9 5.4 8.1 1.6 1.4 1.0 5.9 23.6
(13.4) (175) (150) (136) (205) (40) (35) (25) (150) (600)
280-4078 straight 10.7 4.7 4.2 — 5.9 1.1 0.8 0.8 4.5 — A
(4.88) (120) (108) (150) (28) (20) (20) (113)
280-4079 curved 9.8 4.7 4.2 3.5 5.9 1.1 0.8 0.8 4.5 15.8
(4.5) (120) (108) (90.6) (150) (28) (20) (20) (113) (400)
1-2 4Q2010
Wear Protection
CHOCKY BARS / WEAR BUTTONS
CHOCKY BARS
Cat-branded wear protection parts have been designed to protect more expensive
components, such as machines and buckets, resulting in less downtime and greater
productivity. These combine optimal material characteristics with a uniquely engi-
neered design that provides an effective solution for a wide range of applications.
The wear protection parts consist of the following components:
• Chrome White Iron (CWI): Heat-treated ASTM Class 2, Type B, with a material
hardness of Rockwell C 63.
• Mild Steel Backing Plate: Designed to provide impact absorption resulting in longer
product life.
The CWI and backing plate are bonded together using a copper brazing process.
The result of this process is a highly wear resistant product yielding optimal bond-
ing strength.
Part Number Part Name Description Length (mm) Width (mm) Thickness (mm)
280-4088 Block As. — Wear 1.5" Chocky 241 38 25
280-4089 Block As. — Wear 2.0" Chocky 241 51 25
280-4090 Block As. — Wear 2.5" Chocky 241 64 25
280-4091 Block As. — Wear 4.0" Chocky 241 102 25
WEAR BUTTONS
Cat wear buttons are used in applications that lend themselves to optimizing their
round profile or where their designs are required to cover a specific surface area.
The buttons utilize a “tri-bar” design, which traps fine media between the three
raised bars. The trapped media will provide material-on-material wear prolonging
the life of the product.
4Q2010 1-3
Wear Protection
ROLL BARS / WEAR BLOCK
ROLL BARS
Cat roll bars are designed to protect the leading edge of earthmoving machinery
such as dozers, loaders, mining shovels, etc. Their round profile is designed to pro-
vide maximum wear protection while minimizing drag as the edge proceeds through
the media. Some of the benefits of this design, compared to other wear protection
products, are impact deflection, improved media penetration, and overall weight
reduction.
Part Number Part Name Description Length (mm) Width (mm) Diameter (mm)
280-4096 Block As. — Wear 1.25" Roll Bar 229 38 32
280-4097 Block As. — Wear 2.0" Roll Bar 305 52 51
280-4098 Block As. — Wear 3.0" Roll Bar 305 69 76
WEAR BLOCK
Cat wear blocks are used in areas where a single piece needs to cover a large or
specific surface area. The wear block has a thicker profile, which allows for extended
wear life in extreme applications. The ‘zig zag’ inset design allows for material-
on-material wear and prevents the detrimental channel wear common in grooves that
are parallel to the direction of media flow.
Part Number Part Name Description Length (mm) Width (mm) Thickness (mm)
280-4099 Block As. — Wear 6" ⳯ 8" Tile 203 152 38
For further information including welding instructions, please reference the IRM
PELJ0896 (July 2008) which can be found in the Electronic Sales Library.
BOLT PROTECTOR
Bolt protectors have been designed to protect hardware (bolts and nuts, pins, etc.)
on items such as cutting edges, vertically pinned tips such as V780, top plates,
edge segments, sidebar protectors, etc. This product allows material to pack
between the bolt protector and the hardware, thus preventing wear on the hard-
ware and provides easier removal at the time of GET replacement. These products
are part of the wear protection family and have the following description:
• Chrome White Iron (CWI): Heat-treated ASTM Class 2, Type B, with a material
hardness of Rockwell C 63.
• Mild Steel Backing Plate: Designed to provide impact absorption resulting in
longer product life.
• Single bolt protector with a 4.5" outer diameter and 3.126" diameter opening for
bolt protection.
The CWI and backing plate are bonded together using a copper brazing process.
The result of this process is a highly wear resistant product yielding optimal
bonding strength.
Part Number Part Name Description Outer Diameter (mm) Inner Diameter (hole) (mm) Thickness (mm)
345-8061 Block As. – Wear Single Bolt Protector 114.3 79.4 33.3
1-4 4Q2010
Wear Protection
“WHITE IRON” WEAR BLOCK
This product is designed to add long wear life in highly abrasive applications. It
has a hardness rating of Rc 60-65 and offers lower cost protection than “hard-
137-9698
facing.” In addition to its ease of application, it is environmentally neutral, 4.6" x 4.6" x .54" 137-9697
unlike some other wear protection products. (117 mm x 117 mm x 14 mm) 4.6" x 2" x .54"
(117 mm x 51 mm x 14 mm)
4Q2010 1-5
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
The Mechanically Attached Wear Plate System provides a hammerless means of instal-
lation and removal. They are capable of protecting wear areas previously unprotected
or protected by weld-on or bolt-on wear plates in a large variety of applications on Cat
and competitive machines. The Skeletal MAWPS uses the same Series 20 base and
retainer as the regular MAWPS, but has a modified skeletal plate that fits on the base.
The Skeletal MAWPS wear plate is skeletal in form so it traps material in the plate
and between the plates.
Description
Wear plates are made from Caterpillar DH-2 steel and are thru hardened to obtain
optimum strength and wear life. The base plate is made from slightly softer but tough
weldable steel to withstand high load forces. The base plate is not subject to wear
under normal conditions since it is entirely covered by the wear plate. The patented
compression retainer is investment cast from spring steel material and acts as a
spacer when located in the holding position. As a system, the Mechanically Attached
Wear Plate System should be placed horizontally to the load path of material flow.
They only require approximately 2 inches (50 mm) of space from adjacent objects
on one end to facilitate replacement.
Application
The Mechanically Attached Wear Plate System can be installed on virtually any
flat surface or on moderately curved surfaces providing the radius is not extremely
small. Radius capability is specified in the parts consist chart. Bucket bottoms and
sides, dozer push arms, Hydraulic Excavator bucket ski runners and sides, truck
body duck tails, Tiger dozer blades, crusher hoppers are all candidates for wear plate
protection. Long life, ability to customize protection and ease of use promise to make
this unique wear system a popular alternative to bolt-on or weld-on wear plates.
The Skeletal Mechanically Attached Wear Plate System can be installed on virtually
any flat or moderately curved surfaces of the truck bed. They come in two sizes, stan-
dard and heavy duty. Long life, ability to customize protection and ease of use
promise to make this unique wear system a popular alternative to weld-on wear
protection.
1-6 4Q2010
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
Wear Indicator
The wear plate has recessed holes (blind holes) cast into each corner to serve as a
wear indicator making inspections quick and easy. When the holes become exposed
in one or more corners, it is time to change the wear plate. If the wear plate is
allowed to wear beyond the wear indicator, damage to base plate may occur.
Parts Consist
Mechanically Attached Wear Plate System
Suggested Base Plate Wear Plate Compression Radius
Series Models (thk) (dimension) Retainer Capability*
20 Series 844, 966, 980, 988, 138-0020 138-0022 138-0006 7.87 in (200 mm)
345B, other similar 0.70 in thick 8.85 in x 7.87 in x 1.38 in minimum
sizes (18 mm) (225 mm x 200 mm x 35 mm)
5.35 lb (2.43 kg) 14.15 lb (6.42 kg)
Heavy Duty same same 138-0023 same same
8.85 in x 7.87 in x 1.97 in
(225 mm x 200 mm x 50 mm)
23.9 lb (10.85 kg)
Heavy Duty ARM same same 264-2195 same same
30 Series 854, 990, 992, 375, 138-0030 138-0032 138-0006 15.75 in (400 mm)
5080, other similar 0.86 in thick 10.8 in x 7.87 in x 1.77 in minimum
sizes (22 mm) (275 mm x 200 mm x 45 mm)
8.2 lb (3.72 kg) 21.3 lb (9.67 kg)
Standard ARM same same 229-7067 same same
Heavy Duty same same 138-0033 same same
(10.8 in x 7.87 in x 2.36 in)
275 mm x 200 mm x 60 mm
32.6 lb (14.8 kg)
Heavy Duty ARM same same 317-3350 same same
40 Series 5110, 5130, 138-0040 138-0042 138-0007 31.50 in (800 mm)
other similar 1.14 in thick 10.8 in x 7.87 in x 2.36 in minimum
sizes (29 mm) (275 mm x 200 mm x 60 mm)
10.15 lb (4.61 kg) 29.25 lb (13.28 kg)
Heavy Duty same same 138-0043 same same
10.8 in x 7.87 in x 2.95 in
(275 mm x 200 mm x 75 mm)
41.2 lb (18.7 kg)
50 Series 994, 5230, 138-0050 138-0052 138-0007 47.25 in (1200 mm)
other similar 1.14 in thick 11.81 in x 9.8 in x 2.95 in minimum
sizes (29 mm) (300 mm x 250 mm x 75 mm)
13.4 lb (6.08 kg) 55.25 lb (25.08 kg)
Heavy Duty same same 138-0053 same same
11.81 in x 9.8 in x 3.93 in
(300 mm x 250 mm x 100 mm)
83.15 lb (37.75 kg)
4Q2010 1-7
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
MAWPS Kits:
For customers that are in the process of installing large volumes of MAWPS prod-
ucts in off highway truck beds, kits have been set up to assist on the initial pur-
chase. Each kit contains 5 pieces of the following: base plate, cover (skeletal or
solid), retainer and plug. Table 1 lists the current kit part numbers followed by the
replacement kit part number which now includes the retainer plug.
Table 1
Current New Standard vs.
Part No. Part No. Description Series Heavy Duty
201-1222 304-5834 Kit – MAWPS 20 Standard
201-1223 304-5838 Kit – MAWPS 20 Heavy Duty
201-1224 304-5835 Kit – MAWPS Skeletal Standard
201-1225 304-5839 Kit – MAWPS Skeletal Heavy Duty
201-1232 304-5836 Kit – MAWPS 30 Standard
201-1233 304-5837 Kit – MAWPS 30 Heavy Duty
201-1242 304-5840 Kit – MAWPS 40 Standard
201-1243 304-5841 Kit – MAWPS 40 Heavy Duty
201-1252 304-5850 Kit – MAWPS 50 Standard
201-1253 304-5851 Kit – MAWPS 50 Heavy Duty
Table 2 lists the individual kit piece part numbers as they appear in the kits.
Table 2
Standard Wear Wear
Current vs. Base Plate Plate
Part No. Series No. Heavy Duty Plate (Solid) (Skeletal) Retainer Plug
304-5834 20 Standard 138-0020 138-0022 N/A 138-0006 275-5444
304-5838 20 Heavy Duty 138-0020 138-0023 N/A 138-0006 275-5444
304-5835 20 Standard 138-0020 N/A 138-0024 138-0006 275-5444
304-5839 20 Heavy Duty 138-0020 N/A 138-0025 138-0006 275-5444
304-5836 30 Standard 138-0030 138-0032 N/A 138-0006 275-5444
304-5837 30 Heavy Duty 138-0030 138-0033 N/A 138-0006 275-5444
304-5840 40 Standard 138-0040 138-0042 N/A 138-0007 275-5444
304-5841 40 Heavy Duty 138-0040 138-0043 N/A 138-0007 275-5444
304-5850 50 Standard 138-0050 138-0052 N/A 138-0007 275-5444
304-5851 50 Heavy Duty 138-0050 138-0053 N/A 138-0007 275-5444
1-8 4Q2010
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
Replacement Kits:
Caterpillar now also offers kits for easier conversion on all versions of Mechanically
Attached Wear Plate, all with a discounted price for both standard and heavy-duty
versions. 5 base plates, 5 covers and 5 retainers form each kit.
Solid Skeletal
Standard Heavy Duty Standard Heavy Duty
Series 20 201-1222 201-1223 201-1224 201-1225
Series 30 201-1232 201-1233 N/A N/A
Series 40 201-1242 201-1243 N/A N/A
Series 50 201-1252 201-1253 N/A N/A
N/A = Not Applicable
Promotion Material
CD ROM Training/Sales Presentation: A CD ROM titled “Caterpillar Mechani-
cally Attached Wear Plate System” (PEXT7000) is available through literature
distribution. This can be used by dealer machine and parts sales people for train-
ing or customer sales presentations. The CD Rom is interactive covering an Intro-
duction, Features and Benefits, Size Comparison, How To Remove and Install
and Questions and Answers. The CD plays for approximately 20 minutes and is
complete with video, narration and virtual reality features. Remove and install
instructions can be printed and used as a field reference.
Datasheet: PEHJ0063
Warranty
As with all Ground Engaging Tools from Caterpillar, the Mechanically Attached
Wear Plate System components are warranted against breakage for the normal
wear life of the product. Caterpillar will not provide warranty coverage under the
breakage terms of the warranty statement if the wear plates are worn beyond the
wear indicators on the wear plate.
4Q2010 1-9
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
1-10 4Q2010
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
2) Position the base plate in the desired location and weld the base plate in posi-
tion welding at locations A & B as shown in the following illustration.
Location C is used only for the 50 series base plate. Make one pass at a time in
each location to avoid excess heat build-up. The base plate will require several
passes at each location to ensure proper strength is achieved. Use the chart to
determine fillet weld size and number of passes for each series base plate.
Series Fillet
Base Plate Weld Size
20 Series 0.6 in (15 mm)
30 Series 0.6 in (15 mm)
40 Series 0.7 in (18 mm)
50 Series 0.8 in (20 mm)
3) Position the wear plate over the base plate and slide the wear plate onto the base.
4) Install one end of the compression retainer under the resting point.
5) Insert installation tool 160-5119 or a small pry bar with an 8 mm (0.31") width point
between the base and wear plate and pry the compression retainer into place. After
the retainer compresses and goes over center, it will pop into place and expand.
6) Remove the installation tool and check the compression retainer to assure it is in
position.
Removal
1) Clean the compression retainer opening in the wear plate free of packed material.
A pneumatic chipper is the most effective method to clean the packed material. Not
all packed material needs to be cleaned away to remove the retainer.
2) Insert the installation tool or a small pry bar in the slotted area of the compres-
sion retainer and pry up. The compression retainer will pop up out of the lock-
ing position.
3) Remove the retainer and slide the wear plate off the base plate.
NOTE: Compression retainers can be reused if they meet the following criteria:
1. 138-0006 no less than 87 mm (3.43") length.
138-0007 no less than 97 mm (3.82") length.
2. Retainer is no more than 2 mm (0.080") out of flat.
3. There is no deformation of the retainer material.
4Q2010 1-11
Wear Protection
WEAR BARS
WEAR BARS
Wear bars come in different lengths to allow a customer to tailor the place-
ment of the wear protection while minimizing the amount of throw-away
iron. Part numbers for the various lengths are shown below:
Wear bars are made from DH-2 steel alloy, through-hardened for greater
wear resistance and strength. Core hardness of the bars will be between
45-52 Rc (2.7-3.0 BR). If the bars are to be flame cut, the burn zone must
be preheated to 302-446° F (150-230° C). It is also recommended to pre-
heat the bars to the 302-446° F (150-230° C) temperature when welding.
The bars are to be positioned so the bevel is next to the surface shown at right.
4Q2010 2-1
Bulldozers / Compactors
BULLDOZER BLADES
2-2 4Q2010
Bulldozers / Compactors
D11 CARRYDOZERS
CARRYDOZER GET
Due to its shallow cutting edge angle (35° vs. 56°), the D11 CD blade has only 1.5" (38 mm) of usable wear sur-
face compared to a standard dozer’s 2.618" (66.5 mm). Failure to change cutting edges and end bits at this lower
wear limit will result in extensive damage to the cutting edge support, end bit support and excessive gusset wear.
The Reversible Cutting Edge System offers greater wear life along with a lower cost per hour than the One-way
Cutting Edge System. For additional information, reference IRM GET05-09 (PELJ0520).
4Q2010 2-3
Bulldozers / Compactors
D11 CARRYDOZERS
CUTTING EDGES
Blade Blade Thickness Reversible Edge One-way Edge Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Part Qty.* Bolts Nuts Washers
11 5JP, GD 1.77 45 5 238-3171 5 229-7052 8 5P-8361 3K-9770 4K-0684
Carrydozer BHZ EWL 2.36 60 5 238-3177 5 267-8654
ARM-EWL 2.36 60 5 268-8751 5 268-8750
* Quantity per edge or bit.
END BITS
Blade Blade Part Part # Thickness Hardware
Model Ser. Number Description (R-L) inches mm Qty.* Bolts Nuts Washers
11 5JP, Penetration 273-7223/4 2.36 60 9 5P-8361 3K-9770 4K-0684
Carrydozer BHZ Standard 273-7225/6
Offset (60 mm) 273-7225/6
Short End Bit 273-7228/9
EWL 273-7230/1 3.00 75
EWL – Short End Bit 273-7232/3
ARM-EWL 273-7234/5
ARM – Penetration 223-8127/8
* Quantity per edge or bit.
SIDEBAR PROTECTOR
Blade Sidebar Adapter Shear
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty. Block Qty.
11 Carrydozer 125-0800 2 8E-4708 4 4T-4707 4 135-9794 2 330-4455 2
2-4 4Q2010
Bulldozers / Compactors
D11 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty.* Bolts Nuts
11SU 4BB, 4KB, GD 1.77 45 2 9W-2426–C 9 5P-8823 3K-9770**
9NH, 1AP, 2 9W-2425–E 9
4XP, 8PP EWL 2.36 60 2 9W-4495–C 9
2 9W-4494–E 9
EEWL 3.00 75 2 135-9577–E 9
2 135-9578–C 9
11U 4CB, 5TB, GD 1.77 45 1 9W-2426–C 9 5P-8823 3K-9770**
9MH, 9ZH, 2 9W-2425–E 9
4YP, 8RP 2 9W-2424–I 9
OFFSET 2 138-6483# 9
1 138-6484 9
1 138-6485 9
1 138-6486 9
EWL 2.36 60 1 9W-4495–C 9
2 9W-4494–E 9
2 9W-4493–I 9
ARM-EWL 2 195-9173 9
1 195-9174 9
1 195-9175 9
1 201-1231 9
EEWL 3.00 75 2 195-7187 9
2 135-9577 9
1 135-9578 9
C — Center Edge E — End Edge I — Intermediate Edge GD — General Duty EWL — Extended Wear Life EEWL — Extreme Extended Wear Life
* Number of bolts and nuts required per edge.
** Also use 4K-0684 washers.
EEWL is an extra thick edge for high face wear reclamation applications.
# 195-5118 same as 138-6483 with one sharp edge.
END BITS
Blade Blade EEWL EWL ARM-EWL GD OS
Model Ser. Number (R-L) (R-L) (R-L) (R-L) (R-L)
11SU, 11U 4BB, 4KB, 275-5445/6 8E-4545/6 195-7171/2 8E-4543/4 136-6753/4#
9NH, 1AP, 8PP 109-9053/4
4CB, 5TB, 9MH,
9ZH, 4YP, 8RP
EEWL — Extreme Extended Wear Life EWL — Extended Wear Life GD — General Duty OS — Offset
# 195-5117/6 same as 136-6753/4 with one sharp edge.
4Q2010 2-5
Bulldozers / Compactors
D11 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Part inches mm
11SU 4BB, 4KB, 5-Piece Set Right End 4T-8143 0.63 16
9NH, 1AP Right Center 4T-8145
Center 4T-5308
Left Center 4T-8146
Left End 4T-8144
3-Piece Set Right End 4T-8143
Center 6Y-1100
Left End 4T-8144
Push Plate 4T-5308
8PP 3-Piece Set Right End 136-3984 0.55 14
Center 136-3986
Left End 139-3985
11US 4CB, 5TB, 5-Piece Set Right End 4T-7629 0.63 16
4CB UP to Right Center 4T-7632
00787 Center 4T-5308
Left Center 4T-7631
Left End 4T-7630
3-Piece Set Right End 4T-7629
Center 6Y-1319
Left End 4T-7630
4CB for 00788 3-Piece Set Right End 122-2320
and UP, Center 122-2322
9MH, 9ZH Left End 122-2321
8RP 3-Piece Set Right End 126-8341 0.55 14
Center 126-8343
Left End 126-8342
SIDEBAR PROTECTOR
Blade Sidebar Adapter Shear
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty. Block Qty.
D11 125-0800 2 8E-4708 4 4T-4707 4 135-9794 2 330-4455 2
2-6 4Q2010
Bulldozers / Compactors
D10 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty.* Bolts Nuts
10C 83W FD 1.38 35 2 9J-3751–E 10 8J-2928 2J-3507 a
10SU 79W FD 1.38 35 2 1U-4459–C 9 5P-8823 3K-9770 b
2 1U-4455–E 9
GD 1.57 40 2 4T-0081–C 9
2 4T-0082–E 9
GD 1.77 45 2 6Y-0016–C 9
2 6Y-0017–E 9
EWL 2.00 50 2 4T-0607–C 9
2 4T-0604–E 9
EWL 2.36 60 2 6Y-0020–C 9
2 6Y-0021–E 9
1RH, GD 1.38 35 2 9W-6609–C 6
7RH, 2 9W-6608–E 5
4KP, EWL 1.77 45 2 9W-6656–C 6
6EP, 2 9W-6657–E 5
BHJ, ARM- 2.36 60 1 195-9170–E 5
BHA EEWL 2 195-9171–C 6
1 201-1230–E 5
EEWL** 2 8E-2085–C 6
2 8E-2086–E 5
EEWL** 2.95 75 2 135-9580–C 6
2 135-9579–E 5
10U 80W FD 1.38 35 3 1U-4458–C 9 5P-8823 3K-9770 b
2 1U-4457–E 7
GD 1.57 40 3 4T-0083–C 9
2 4T-0084–E 7
GD 1.77 45 3 6Y-0018–C 9
2 6Y-0019–E 7
EWL 2.00 50 3 4T-0609–C 9
2 4T-0608–E 7
EWL 2.36 60 3 6Y-0023–C 9
2 6Y-0022–E 7
1SH, GD 1.38 35 3 9W-6615–C 5
7WH, 2 9W-6608–E 5
4LP, EWL 1.77 45 3 9W-6658–C 5
6FP, 2 9W-6657–E 5
BHF, ARM- 2.36 60 3 223-8149–C 5
BHP EEWL 1 195-9170–E 5
1 201-1230–E 5
EEWL** 3 8E-2087–C 5
2 8E-2086–E 5
C — Center Edge E — End Edge FD — Finish Dozing GD — General Duty EWL — Extended Wear Life
* Per edge.
** EEWL is an extra thick edge for high face wear reclamation applications.
a Uses 5P-8250 washers.
b Uses 4K-0684 washers.
D10 BULLDOZERS
4Q2010 2-7
Bulldozers / Compactors
D10 BULLDOZERS
END BITS
Abrasion/
Blade Blade EEWL EWL ARM-EWL GD Finish Impact
Model Ser. Number (R-L) (R-L) (R-L) (R-L) (R-L) (R-L)
10C 83W 275-5941/2 (2) 4T-6538
10SU, 10U 79W, 80W 8E-4545/6 8E-4543/4
4KP, 6EP, 1RH, 1SH, 8E-4541/2 195-7173/4 8E-4199/8 7T-4689/8–HC
4LP, 6FP, 7RH, 7WH,
BHA, BHJ, BHF, BHP
EEWL — Extreme Extended Wear Life EWL — Extended Wear Life GD — General Duty HC — Hot cupped design
SIDEBAR PROTECTOR
Blade Sidebar Adapter Shear
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty. Block Qty.
D10 125-0800 2 8E-4708 4 4T-4707 4 135-9794 2 330-4455 2
NOTE: For more information on D10 and D11 Sidebar Protector, refer to GET 99-30, PELM0918.
2-8 4Q2010
Bulldozers / Compactors
D10 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
10C 83W Push Plate 9J-4567 0.79 20
10SU 79W1-536 Wear Plates 8 3G-6344 0.47 12
Push Plate 3G-6343 0.63 16
79W537-UP 5-Piece Set Right End 4T-3722 0.63 16
Right Center 4T-3725
Center/Push 1U-3697
Left Center 4T-3724
Left End 4T-3723
1RH, 7RH, 5-Piece Set Right End 218-3922 0.55 14
4KP, 6EP, Right Center 9W-7260 0.63 16
BHA, BHJ Center 9W-2409
Left Center 9W-7261
Left End 218-3923 0.55 14
3-Piece Set Right End 218-3922
Center 218-3924
Left End 218-3923
Push Plate 9W-2409 0.63 16
10U 80W1-467 All 9 3G-6344 0.47 12
80W468-UP 5-Piece Set Right End 4T-3726 0.63 16
Right Center 4T-3729
Center 1U-3697
Left Center 4T-3728
Left End 4T-3727
1SH, 7WH 5-Piece Set Right End 9W-7263
Right Center 9W-7262
Center 9W-2409
Left Center 9W-7264
Left End 9W-7265
3-Piece Set Right End 9W-7263
Center 6Y-1080
Left End 9W-7265
4LP, 6FP, 3-Piece Set Right End 218-3939 0.55 14
BHF, BHP Center 218-3941
Left End 218-3940
4Q2010 2-9
Bulldozers / Compactors
D9 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
9A 52C, 90D, FD 1.12 28 1 4T-6388–C 7 8J-2928 2J-3507 c
11E, 26E 2 4T-6387–E 9
EWL 1.62 41 1 7J-2966–C 7
2 7J-2965–E 9
9C 70F, 45G FD 1.12 28 1 4T-6450–C 15 8J-2928 2J-3507 c
20Y 2 4T-6388–E 7
9R 39K FD 1.12 28 3 4T-6386 7 8J-2928 2J-3507 c
EWL 1.62 41 3 7J-2980 7
9SU 21E1–831, FD 1.12 28 1 4T-6459–C 9 8J-2928 2J-3507 c
25E, 06A 2 4T-6456–E 6
EWL 1.62 41 1 7J-2961–C 9 4J-9208
2 7J-2960–E 6
53C, 89D, FD 1.12 28 2 4T-6448 10 4J-9208 2J-3507 c
21E832-UP EWL 1.62 41 2 7J-2962 10
05A, 18K, 46K, FD 1.12 28 3 4T-6386 7 4J-9208 a 2J-3507 c
73R, 61U GD 1.38 35 3 9W-4500 7 4J-9058 c
EWL 1.62 41 3 7J-2980 7 8J-2928
EWL 1.57 40 3 7T-4342* 7 4J-9058 c
18Y1-1875, FD 1.12 28 1 4T-6386–C 7 4J-9208 2J-3507 c
52Y, 42S 2 4T-6385–E 8
GD 1.38 35 1 9W-4500–C 7 1J-4948
2 9W-4502–E 8
GD 1.38 35 1 6Y-0310*–C 7 4J-9208
1 6Y-0311*–L 8
1 6Y-0312*–R 8
EWL 1.62 41 1 7J-2980–C 7
2 9W-4508–E 8
EWL2** 1.77 45 1 6Y-0476*–C 7
1 6Y-0477*–L 8
1 6Y-0478*–R 8
18Y1876-UP GD 1.38 35 2 7T-9782–C 6 6V-8360 3K-9770 b
2 7T-9779–E 5
EWL 1.77 45 2 9W-3928–C 6 5P-8823
2 9W-3930–E 5
1MH, 5BH, FD 1.10 28 1 6Y-5539–C 12 4J-9208 2J-3507 c
1LP, 2LP, 2 6Y-5540–E 5
7NH, 2ZP, GD 1.38 35 1 7T-5702–C 12
2BP, 9LH, 2 7T-9125–E 5
9RP, CLC, CLN, EWL 1.77 45 1 9W-7043–C 12
CLY, CMA, T9J 2 112-2471–E 5
C — Center Edge E — End Edge L — Left End R — Right End
FD — Finish Dozing GD — General Duty EWL — Extended Wear Life
* Wider edges with offset bolt holes. Use only with 7T-4092/3 (long side) or 9W-9193/4 (short side).
** EWL2 is an extra thick edge for high face wear reclamation applications.
a Uses 3K-5234 washers.
b Uses 4K-0684 washers.
c Uses 5P-8250 washers.
2-10 4Q2010
Bulldozers / Compactors
D9 BULLDOZERS
4Q2010 2-11
Bulldozers / Compactors
D9 BULLDOZERS
END BITS
GD* Utility
Blade Blade EWL Thickness Finish Thickness Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) (R-L) inches mm Qty. Bolts Nuts
9A 52C, 90D, 4J-8723/4 1.25 32 7 d 8J-2928 c 2J-3507
11E, 26E 3G-8291/2 1.38 35
9C 70F, 45G 3G-8283/4 1.57 40 7c 4J-9208 c 2J-3507
20Y (2) 4T-6389 5d 4J-9058 c
9R 39K 4T-6391/2 7d 8J-2928 c 2J-3507
9SU 53C, 89D, 21E, 25E, 3G-8289/90 1.38 35 7d 8J-2928 c 2J-3507
18K, 46K, 73R, 61U 3G-8281/82 1.57 40
18Y, 52Y, 8E-4541/2 1U-1545/6 1.57 40 3G-7763/4 100-3131/2 1.75 45 7 d 5P-8823 b 3K-9770
42S 8E-4199/8 a 2.16 55 100-3133/4 2.36 60
7T-4689/8 2.36 60
1MH, 5BH, 2BP, 2ZP, 8E-4539/40 8E-4197/6 1.97 50 6Y-4277/8 100-3135/6 1.75 45 7 d 4J-9208 c 2J-3507
1LP, 2LP, 7NH, 9LH, 100-3137/8 2.36 60
9RP, CLC, CLN, CLY,
CMA, CMN, T9J
9U 55C, 14C, 19K, 4J-8723/4 1.25 32 7 d 8J-2928 c 2J-3507
20H, 78X, CMH 3G-8291/2 1.38 35
3G-8283/4 1.57 40
8E-4197/6 1.97 50
19Y, 78S 8E-4541/2 1U-1545/6 1.57 40 3G-7763/4 100-3131/2 1.75 45 7 d 5P-8823 b 3K-9770
8E-4199/8 a 2.16 55 100-3133/4 2.36 60
7T-4689/8 2.36 60
1LH, 2ZH, 8E-4539/40 8E-4197/6 1.97 50 6Y-4277/8 100-3135/6 1.75 45 7 d 4J-9208 c 2J-3507
1MP, 7PH, 100-3137/8 2.36 60
CMS, CMW,
CMZ, 9MP, T9H
* Part numbers that begin with: 3G, 1U, 7T = Hot cupped, Abrasion.
4J, 5J, 1U, 7T = Impact.
a Use only with 16" (406 mm) wide edges.
b Use 4K-0684 washers.
c Use 5P-8250 washers.
d Quantity per end bit.
SIDEBAR PROTECTOR
Blade Sidebar Adapter Shear
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty. Block Qty.
D9, D8 9J-9600 2 135-9350 4 8E-6359 4 152-0027 2 331-7417 2
NOTE: For more information on D8 and D9 Sidebar Protector, refer to IRM 01-14, PELM1017.
2-12 4Q2010
Bulldozers / Compactors
D9 BULLDOZERS
WEAR PLATES
Blade Serial Part Thickness
Model Number Location Qty. Number inches mm
9A 52C, 90D, 11E, 26E All 5 3J-3380 0.47 12
9R 63E, 39K Sides 4 6J-9249 0.47 12
Center 1 6J-9248 0.63 16
9SU 53C, 89D, 21E, 25E, 06A Wear Plates 4 2J-8523 0.47 12
Push Plate 1 2J-8524 0.79 20
18K, 46K, 73R, 61U, 05A Wear Plates 4 6J-9249 0.47 12
Push Plate 1 6J-9248 0.63 16
18Y1-1875, 52Y1-1875, 425 5-Piece Set Right End 4T-3730 0.63 16
Right Center 4T-3732 0.63 16
Center/Push 1U-0902 0.63 16
Left Center 4T3733 0.63 16
Left End 4T3731 0.63 16
All Push Plate 4-Piece Set Push Plate 4 1U-0903 0.47 12
Push Plate 1 1U-0902 0.63 16
18Y1876-UP 5-Piece Set Right End 9W-1258 0.63 16
Right Center 9W-1259 0.63 16
Center/Push 9W-0810 0.63 16
Left Center 9W-1260 0.63 16
Left End 9W-1261 0.63 16
1MH, 5BH, 7NH, 5-Piece Set Right End 218-3885 0.55 14
1LP, 2LP, 2ZP, Right Center 9T-0251 0.63 16
CLY, CMA, T9J Center 7T-5803 0.63 16
Left Center 9T-0252 0.63 16
Left End 218-3887 0.55 14
3-Piece Set Right End 218-3885 0.55 14
Center 218-3888 0.55 14
Left End 218-3887 0.55 14
Push Plate 7T-5803 0.63 16
9RP, CLC 3-Piece Set Right End 218-3885 0.55 14
Center 218-3888 0.55 14
Left End 218-3887 0.55 14
9U 55C Wear Plates 4 2J-8525 0.47 12
Push Plate 1 2J-8524 0.79 20
14C, 19K, 78X Wear Plates 4 6J-9269 0.47 12
19Y1-1474, 78S1-1474 5-Piece Set Right End 4T-3734 0.63 16
Right Center 4T-3736 0.63 16
Center 1U-0902 0.63 16
Left Center 4T-3737 0.63 16
Left End 4T-3735 0.63 16
All Push Plate Push Plate 1 1U-0903 0.47 12
19Y1475-UP 5-Piece Set Right End 9W-0812 0.63 16
Right Center 9W-0809 0.63 16
Center 9W-0810 0.63 16
Left Center 9W-0811 0.63 16
Left End 9W-0808 0.63 16
1LH, 2ZH, 7PH, 1MP, 3-Piece Set Right End 217-7155 0.55 14
9MP, CMS, CMZ, T9H Center 217-7156 0.55 14
Left End 217-7157 0.55 14
CMH, CMN Push Plate 7T-5803 0.63 16
9C 70F, 45G, 20YI-533, Push Plate 1 4J3868 0.63 16
20Y543 Push Plate 1 9J-4567 0.79 20
Push Plate 1 4T-9534 0.79 20
4Q2010 2-13
Bulldozers / Compactors
D8 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
8A 07A, 18C, 33D, FD 0.75 19 2 4T-2943 16 1J-6762 2J-3506
99D, 87D, 07E, FD 1.00 25 2 4T-2888
22E, 72D GD 1.38 35 2 9W-8657
28E1-11125 FD 1.00 25 4 4T-6532 6 5J-2409 2J-3505
GD 1.38 35 4 6Y-6761
EWL 1.57 40 4 107-3474*
4 7T-4348*
28E11126-UP, FD 1.00 25 3 4T-2994 8 4J-9058 2J-3507
93E, 14F, 77C GD 1.38 35 3 9W-8658
EWL 1.57 40 3 107-3484*
3 7T-4351*
05Y, 41Z, 27B FD 1.00 25 2 4T-2988–C 7 4J-9208 2J-3507 a
2 4T-2987–E 6
GD 1.38 35 2 9W-8655–C** 7
2 9W-8657–E** 6
GD 1.38 35 2 1U-4933–C 7
2 1U-4932–E 6
EWL 1.77 45 2 107-3479–C 7
2 107-3481–E 6
EWL 1.57 40 2 7T-4353–C* 7
2 7T-4352–E* 6
1HH, 2XP, FD 1.12 28 3 9W-5432 8 4F-4042 2J-3507 b
9AH, 6NH, 4ZP GD 1.38 35 3 9W-9098 8
EWL 1.77 45 3 112-2474 8
BHR, 9ZP, DZD, FD 1.12 28 3 135-9373 8 4F-4042 2J-3507 b
D1E, D1F GD 1.38 35 3 135-9628
EWL 1.77 45 3 135-9629
8C 71F, 77G FD 1.00 25 1 4T-2867 13 5J-2409 2J-3505
8R 43K FD 1.00 25 2 4T-3418 10 5J-2409 2J-3505
8SU LGP KMB, LAA, DZC FD 1.12 28 1 4Z-9058 13 4J-9058 2J-3507 b
2 6Y-5540 5
8SU 08A, 12C, 18C, FD 0.75 19 2 4T-2944 13 1J-6762 2J-3506
32D,03E, 86D, FD 1.00 25 2 4T-2860
44C1-1192
44C1193-UP, FD 1.00 25 2 4T-2862 10 1J-6762 2J-3506
73D
78C, 29E, 94E FD 1.00 25 2 4T-6531 10 5J-2409 2J-3505
GD 1.38 35 2 6Y-6764
EWL 1.57 40 2 6Y-5776*
EWL 1.77 45 2 107-3477
69E, 14J, 44K, FD 1.00 25 2 4T-3418 10 5J-2409 2J-3505
95S, 80V, 47K GD 1.38 35 2 6Y-6763
EWL 1.57 40 2 6Y-5777*
EWL 1.77 45 2 107-3476
29V, 30W FD 1.00 25 3 4T-2988 7 4J-9058 2J-3507
68V, 60V GD 1.38 35 3 9W-8657
EWL 1.77 45 3 107-3479
EWL 1.57 40 3 7T-4353*
04Y1-1939 FD 1.12 28 2 4T-3423–C 6 4J-9208 2J-3507
2 4T-3417–E 5
GD 1.38 35 2 1U-4930–C 6
2 1U-4929–E 5
GD 1.38 35 2 6Y-6358–C** 6
2 6Y-6359–E** 5
EWL 1.77 45 2 107-3482–C 6
2 107-3480–E 5
EWL 1.57 40 2 7T-5235–C* 6
1 7T-4346–L* 5
1 7T-4345–R* 5
C — Center Edge E — End Edge L — Left End R — Right End FD — Finish Dozing GD — General Duty EWL — Extended Wear Life
* EWL — wider edges with offset bolt holes. Use only with EWL end bits — 7T-4088/9 (long side) and 9W-8651/2 (short side).
** 11" (280 mm) wide edges.
a Uses 3K-5234 washers. b Uses 5P-8250 washers.
2-14 4Q2010
Bulldozers / Compactors
D8 BULLDOZERS
4Q2010 2-15
Bulldozers / Compactors
D8 BULLDOZERS
END BITS
GD* Utility
Blade Blade EWL Thickness Finish Thickness Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) (R-L) inches mm Qty. c Bolts Nuts
8A 07A, 18C, 33D, 3J-2465/6 1.00 25 4T-6667/8 7 1J-6761 2J-3506
72D, 87D, 99D
07E, 22E
28E1-11125, 4J-8843/4 1.12 28 4T-6505/6 7 5J-2409 2J-3505
93E, 14F, 77C 3G-8315/6 1.12 28
3G-8285/6 1.57 40
28E11126-UP 9J-1477/8 1.12 28 4T-6239/40 7 4J-9058 b 2J-3507
3G-8317/8 1.18 30
3G-8287/8 1.57 40
05Y, 41Z, 27B 9J-1477/8 1.12 28 4T-8089/90 7 4J-9058 b 2J-3507
3G-8317/8 1.18 30
3G-8287/8 1.57 40
6NH, 1HH, 8E-4537/8 8E-4193/4 1.57 40 6Y-4277/8 100-3139/40 1.97 50 7 4F-4042 b 2J-3507
2XP, 9AH, 4ZP, 136-8757/6 2.36 60
BHR, 9ZP, DZD
8C 71F, 77G 4J-8843/4 1.12 28 4T-6505/6 7 5J-2409 2J-3505
3G-8315/6 1.12 28
3G-8285/6 1.57 40
8R 43K 4T-6669/70 7 5J-2409 2J-3505
7J-2975/6 a
8SU 08A, 12C, 18C, 4T-6671/2 1.00 25 4T-6671/2 7 1J-6761 2J-3506
86D, 44C, 32D,
73D, 03E
78C, 29E, 94E, 69E, 3G-8299/300 1.12 28 7 5J-2409 2J-3505
14J, 44K, 47K 3G-8277/8 1.57 40
29V, 30W, 68V, 3G-8301/2 1.12 28 7 4J-9058 b 2J-3507
60V 3G-8279/80 1.57 40
04Y1-1939 9J-1477/8 1.12 28 4T-8089/90 7 4J-9208 b 2J-3507
3G-8317/8 1.18 30
3G-8287/8 1.57 40
04Y1940-UP 8E-4539/40 4J-8723/4 1.12 28 100-3135/6 1.75 45 7 4J-9208 b 2J-3507
3G-8291/2 1.38 35 100-3137/8 2.36 60
3G-8283/4 1.57 40
8E-4197/6 1.97 50
9PH, 3WH, 8E-4537/8 8E-4193/4 1.57 40 6Y-4277/8 100-3139/40 1.97 50 7 4J-9058 b 2J-3507
1HP, 6LH, 9BH, 136-8757/6 2.36 60
2NP, 1KH, 2PP,
2TP, 3MP, 05A,
9TP, KMB, LAA,
BHW, B8S, DZA,
DZX
8U 11C, 74D, 3J-2465/6 1.12 28 4T-6667/8 7 1J-6762 2J-3506
88D, 24E
30E, 73E, 20F, 4J-8843/4 1.12 28 4T-6505/6 7 5J-2409 2J-3505
45K, 48K, 29J 3G-8315/6 1.12 28
3G-8285/6 1.57 40
30V, 65X, 69V, 9J-1477/8 1.12 28 4T-6239/40 7 4J-9058 b 2J-3507
06Y1-1395, 3G-8317/8 1.18 30 4T-8089/90
34W 3G-8287/8 1.57 40
06Y1396-UP, 8E-4539/40 4J-8723/4 1.12 28 100-3135/6 1.75 45 7 4J-9208 b 2J-3507
42Z, 8ZM 3G-8291/2 1.38 35 100-3137/8 2.36 60
3G-8283/4 1.57 40
8E-4197/6 1.97 50
9CH, 1JH, 2WP, 8E-4537/8 8E-4193/4 1.57 40 6Y-4277/8 100-3139/40 1.97 50 7 4J-9058 b 2J-3507
6AH, 9WP, CXB, 136-8757/6 2.36 60
A5G, DZB
* Part numbers that begin with: 3G = Hot cupped, Abrasion. EWL — Extended Wear Life GD — General Duty
3J, 4J, 9J = Impact.
a 1.57" (40 mm) thick.
b Uses 5P-8250 washers.
c Quantity per end bit.
2-16 4Q2010
Bulldozers / Compactors
D8 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
8A 28E, 93E, 14F, 77C, 2XP, 4ZP, Wear Plates 5 2J-8526 0.40 10
054, 412, 27B, 9AH, 6NH
8C 71F, 77G Push Plates 2J-9418 0.63 16
8R 43K Push Plates 1 6J-9285 0.63 16
8SU 78C, 29E, 94E Wear Plates 4 4J-4205 0.47 12
Push Plate 1 4J-4129 0.79 20
80V, 95S, 69E, 14J, 44K, 47K Wear Plates 4 6J-9286 0.47 12
29V, 30W, Wear Plates 5 9J-1659 0.47 12
68V, 60V Push Plates 1 9J-6870 0.63 16
04Y1-1939 Wear Plates 5 1U-4417 0.47 12
Push Plate 6J-9248 0.63 16
04Y1940-UP, 74M, 402, 5-Piece Set Right End 9T-0249 0.63 16
9TB, 26B Right Center 9T-0251 0.63 16
Center/Push 4T-9592 0.63 16
Left Center 9T-0252 0.63 16
Left End 9T-0250 0.63 16
1KH, 2PP, 2TP, 3MP, 5-Piece Set Right End 9W-2757 0.63 16
DZA, B8S, 2NP, 9BH, Right Center 9W-2758 0.63 16
9PH, 1HP, 6LH, DZX Center 9W-2756 0.63 16
Left Center 9W-2759 0.63 16
Left End 9W-2760 0.63 16
3-Piece Set Right End 9W-2757 0.63 16
Center 9W-1771 0.63 16
Left End 9W-2760 0.63 16
Push Plate 9W-2756 0.63 16
8U 30E, 73E, 29J Wear Plates 4 4J-4205 0.47 12
Push Plate 1 4J-4129 0.79 20
20F, 45K, 48K Wear Plates 4 6J-9286 0.47 12
30V, 65X, 69V, 34W Wear Plates 4 9J-1659 0.47 12
1 9J-7539 (RH) 0.47 12
1 9J-7540 (LH) 0.47 12
Push Plate 9J-6870 0.63 16
06Y1-1395, 42Z, 82M Wear Plates 6 1U-4417 0.47 12
06Y1396-UP 5-Piece Set Right Center 9T-0255 0.63 16
Right End 9T-0253 0.63 16
Center/Push 4T-9592 0.63 16
Left End 9T-0254 0.63 16
Left Center 9T-0256 0.63 16
1JH, 6AH, 2WP, A5G, 3-Piece Set Right End 6Y-7245 0.55 14
DZB, 9CH, 6AH Center 6Y-7244 0.55 14
Left End 6Y-7246 0.55 14
SIDEBAR PROTECTOR
Blade Sidebar Adapter Shear
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty. Block Qty.
D9, D8 9J-9600 2 135-9350 4 8E-6359 4 152-0027 2 331-7417 2
4Q2010 2-17
Bulldozers / Compactors
D7 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
7A 06A, 17C5001-UP, FD 0.75 19 2 4T-2949 15 5J-4771 2J-3506
35D, 84D, 6E, 18E FD 1.00 25 2 4T-2863
13F, 22F, FD 0.75 19 3 4T-2948 7 5J-4771 a 2J-3506
30F, 72F, 13H GD 1.00 25 3 4T-2989
GD 1.00 25 3 9W-9796*
4EB, 3CC, 4ZC FD 0.75 19 3 4T-3901 7 6F-0196 b 2J-3505
GD 1.00 25 3 7T-6589*
EWL 1.38 35 3 135-9778*
7S 05A, 17C1-5000, FD 0.75 19 1 4T-2954 23 5J-4771 2J-3506
84C, 34D, 83D, GD 1.00 25 1 4T-2864
02E, 17E
23F, 31F, 59F, FD 0.75 19 1 4T-2946–C 7 5J-4773 2J-3506
14H 2 4T-2945–E 5
GD 1.00 25 1 4T-2990–C 7
2 4T-2991–E 5
53J, 49K, 60K, FD 0.75 19 1 4T-2921–C 7 5J-4772 b 2J-3505
64K, S7G 2 4T-2922–E 5
GD 1.00 25 1 4T-2993–C 7
2 4T-2992–E 5
GD 1.00 25 1 9W-9794–C* 7
2 9W-9795–E* 5
6KB, 8ZB, 4XC, FD 0.75 19 3 4T-5318 6 6F-0196 b 2J-3505
8NH, J8L, CDC, GD 1.00 25 3 7T-6678*
8GH EWL 1.38 35 3 107-3363
7U 42G FD 0.75 19 1 4T-2955–C 9 5J-4773 2J-3506
2 4T-2952–E 5
GD 1.00 25 1 4T-2890–C 9
2 4T-2985–E 5
85D, 61K, 94R FD 0.75 19 1 4T-2917–C 9 5J-4772 b 2J-3505
2 4T-2916–E 5
GD 1.00 25 1 4T-3421–C 9
2 4T-3420–E 5
GD 1.00 25 1 9W-9793–C* 9
2 9W-9792–E* 5
5SB, 9JB, 7AC, FD 0.75 19 2 4T-7110–C 6 6F-0196 b 2J-3505
8MH, JIL, CDL 2 4T-7109–E 4
GD 1.00 25 2 7T-6591–C* 6
2 7T-6592–E* 4
EWL 1.38 35 2 135-9627–C* 6
2 135-9626–E* 4
7S-LGP 6JB, 3GH, 4FG, FD 0.75 19 3 4T-3901 7 6F-0196 2J-3505
4XH, 5GH GD 1.00 25 3 7T-6589*
EWL 1.38 35 3 135-9778*
2RP, 8RH, 5SP, FD 0.75 19 3 128-5883
9KP, J4L, CDN, GD 1.00 25 3 135-6537*
8JH EWL 1.38 35 3 145-7846
7SU 4DB, 2FC, 2JH, FD 0.75 19 1 4T-5318–C 6 6F-0196 2J-3505
1JP, 8LH, CDT 2 1U-1192–E 6
J6L, BHT, 8EH GD 1.00 25 1 7T-6678–C* 6
2 7T-6936–E* 6
EWL 1.38 35 1 107-3363–C 6
2 107-3362–E 6
C — Center Edge E — End Edge FD — Finish Dozing GD — General Duty
* Edges are 11" (280 mm) wide.
a Uses 5P-8248 washers.
b Uses 5P-8249 washers.
2-18 4Q2010
Bulldozers / Compactors
D7 BULLDOZERS
END BITS
GD* Utility
Blade Blade Thickness Finish Thickness Hardware
Model Ser. Number (R-L) inches mm (R-L) (R-L) inches mm Qty. Bolts Nuts
7A 06A, 35D, 84D, 3J-2465/6 1.12 28 4T-6667/8 3 a 1J-6761 2J-3506
06E, 18E, 4 a 5J-4771
17C5001-UP
22F, 30F, 72F, 3G-8293/4 0.88 22 4T-6505/6 105-0575/4 1.38 35 7a 5J-2409 2J-3505
13F, 13H, 4EB, 3G-8315/6 1.00 25 105-0577/6 1.75 45
3CC, 4ZC 4J-8843/4 1.12 28
9W-6199/8 1.38 35
7S 05A, 84C, 34D, 4T-6671/2 7a 5J-4771 2J-3506
83D, 02E, 17E,
17C1-5000
8ZB, 23F, 31F, 59F, 3G-8293/4 0.88 22 4T-6505/6 105-0575/4 1.38 35 7a 6F-0196 2J-3505
60K, 14H, 49K, 64K, 3G-8315/6 1.00 25 105-0577/6 1.75 45
4XC, 53J, 6KB, 8NH, 4J-8843/4 1.12 28
CDC, J8L, S7G, 8GH 9W-6199/8 1.38 35
7U 9JB, 42G, 85D, 61K, 3G-8293/4 0.88 22 4T-6505/6 105-0575/4 1.38 35 7a 6F-0196 2J-3505
7AC, 94R, 5SB, 8MH, 3G-8315/6 1.00 25 105-0577/6 1.75 45
J1L, CDL 9W-6199/8 1.38 35
7S-LGP 9KP, 6JB, 2RP, 8RH, 4J-8843/4 1.12 28
5SP, CDN, J4L, 8JH 9W-6199/8 1.38 35
7SU 2FC, 4DB, 1JP, 8LH, 9W-6199/8 1.38 35
2JH, BHT, J6L, CDT,
8EH
* Part numbers that begin with: 3G = Hot cupped, Abrasion.
3J, 4J = Impact.
a Quantity per end bit.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
7A 6A, 17C, 5001-UP, 35D, Wear Plates 3 3J-3141 0.31 8
84D, 6E, 18E, 13F, 22F,
30F, 72F, 13H, 4EB, 3CC
7S 23F, 31F, 59F, 14H, 58J, Wear Plates 3 3J-3142 0.31 8
49K, 60K, 64K, 05A, Push Plate 4J-3699 0.6316
1701-5000, 84C, 340, 83D,
02E, 6KB, 8NH, 8ZB, 4XC, 8GH
7SU 4DB, 1JP, 8L11, CDT Push Plate 4J-3699 0.63 16
“All” Wear Plates 4 3J-3142 0.31 8
CDT Right End 1 4Z-9148 0.50 12
Center 1 4Z-9151
Left End 1 4Z-9150
7U 85D, 42G, 61K, 94R, 5SB, Wear Plates 4 3J-3142 0.31 8
8MH, 9JB, 7AC Push Plate 4J-3699 0.63 16
7S-LGP 6JB, 2RP, BRH, 3GH, Wear Plates 5 2J-8523 0.50 12
4XH, 5GH, 5SP, 9K9, 8JH
4Q2010 2-19
Bulldozers / Compactors
D6 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts Washers
6A 16C5001-UP, FD 0.75 19 1 4T-3008–C 11 3F-5108 4K-0367
37D, 81D, 16E, 2 4T-3020–E 9
03F, 04F, 40H
15C5001-UP, FD 0.62 16 1 4T-2978 24
39D, 82D, 08E, 0.75 19 2 4T-3030 12
09E
54U, 44E, 47G, FD 0.75 19 2 4T-3009 10 4F-7827 2J-3506 5P-8248
58G, 18H
1BH1-0569, FD 0.75 19 3 4T-6262 7 5J-4773 2J-3506 5P-8248
4DH, 4LH, 3EH EWL 1.00 25 3 7T-9977
1BH0570-UP FD 0.75 19 4 4T-2952 5
EWL 1.00 25 4 4T-2985
1XP, 3GP, C4R, FD 0.75 19 4 4T-2952 5 5J-4773 2J-3506 5P-8248
1ZP, 1YP
3PP, 4BP, 8TP, EWL 1.00 25 4 4T-2985 5
1AR
MMX FD 0.75 19 4 4T-2923
6A Custom Wide 6HP, A6B FD 0.75 19 4 109-9093 6 5J-4773 2J-3506 5P-8248
6P 3WP, 3XP FD 0.75 19 2 3G-4282 7 5J-4773 2J-3506 5P-8248
6PXL B6X, G6M, G6N FD 0.75 19 2 3G-4282 7 5J-4773 2J-3506 5P-8248
6P-LGP 4MP, B6L, G6G FD 0.75 19 2 4T-2315 10 5J-4773 2J-3506 5P-8248
4TP, 4WP FD 0.75 19 2 127-3050 10
G6M FD 0.75 19 2 3G-4282 7
6P-LGP Foldable F6W, F6Y FD 0.75 19 2 177-4550 9 5J-4773 2J-3508 5P-8248
6S 09A, 01C, 06C, FD 0.62 16 1 4T-2977 18 3F-5108 4K-0367
15C1-5000 FD 0.75 19 1 4T-3021 18
16C1-5000 FD 0.62 16 1 4T-2976 22
85C, 36D, 80D, FD 0.75 19 1 4T-3023 22
38D, 15E, 02G,
03G, 39H
95E, 17H, 46G, FD 0.75 19 1 *4T-3013–C* 7 4F-7827 2J-3506 5P-8248
55G, 63S 2 *4T-3010–E* 4
21H, 41H FD 0.75 19 1 4T-3011–C 11
2 4T-3010–E 4
1DH1-0599, 2HH, FD 0.75 19 1 4T-6659–C 7 5J-4773 2J-3506 5P-8248
3JH, 4BH 4T-3010–E 4
EWL 1.00 25 1 7T-9976–C 7
2 7T-9978–E 4
1RP, 3EP, FD 0.75 19 3 4T-2952 5 5J-4773 2J-3506 5P-8248
1DH600-UP, EWL 1.00 25 3 4T-2985
CLH, 3EP, BHN, P6S
6S-LGP 1AH, 2LH, 3FH, FD 0.75 19 3 4T-6659 7 5J-4773 2J-3506 5P-8248
1SP, 3HP, BHG EWL 1.00 25 3 7T-9976
B9B, 08S FD 0.75 19 2 4T-2950
6SU 1CH, 2NH, 4PH FD 0.75 19 2 9W-1878 8 5J-4773 2J-3506 5P-8248
8AH, 8BH EWL 1.00 25 2 6Y-3840
2SP, 6GP, FD 0.75 19 2 9U-8057–E 4 5J-4773 2J-3506 5P-8248
ECA, SGD 1 4T-6659–C 7
1TP, 3FP, 1WP, FD 0.75 19 2 9W-1878 8 5J-4773 2J-3506 5P-8248
3RP, 4AP, 8SP, EWL 1.00 25 2 6Y-3840 8
BHM, D6C, P6A,
D2S, MGH, D4S,
C4N, C4L
6SU Custom Wide 1WP**, 9BP**, FD 0.75 19 2 106-0956 9 5J-4773 2J-3506 5P-8248
B8B EWL 1.00 25 2 229-6599
6PAT M3H, M4H FD 0.75 19 2 229-6958
M1H FD 0.75 19 2 219-4599
C — Center Edge E — End Edge FD — Finish Dozing EWL — Extended Wear Life P — Variable Pitch Power Angle Tilt
* Optional one-piece edge 4T-3017 can be used to replace (1) 4T-3013 and (2) 4T-3010.
** Identified by part #4Z-9230 or 143-0499 on the blade assembly plate.
NOTE: Cutting edges for the SLGP blades are 8" (203 mm) wide. Cutting edges for all other blades are 10" (254 mm) wide.
2-20 4Q2010
Bulldozers / Compactors
D6 BULLDOZERS
END BITS
GD*
Blade Blade EWL Thickness Finish Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) Utility Qty. a Bolts Nuts
6A 37D, 39D, 81D, 9F-7075/6 0.88 22 4T-3049/50 6 3F-5108 4K-0367
82D, 08E, 09E, 3G-8295/6 0.88 22
16E, 03F, 04F,
40H, 15C5001-UP,
16C5001-UP
44E, 47G, 58G, 3G-8297/8 0.88 22 4T-3041/2 6 4F-7827 2J-3506
18H, 54U 9W-9011/10 1.00 25
3EH, 1BH1-569, 4T-4455/4 4T-4435/6 6 **5J-4773**
4DH, 4LH
1BH570-UP, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-3506
1XP, 3GP, 1ZP,
3PP, 4BP, 8TP,
1YP, C4R,
MMX, 1AR
6A Custom 6HP, A6B 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-3506
Wide
6P 3WP, 3XP 4T-5407/8 140-6787/8# 0.88 22 8E-9379/78 b 4 **5J-4773** 2J-3506
6PXL B6X, G6M, G6N 4T-5407/8 140-6787/8# 0.88 22 8E-9379/78 b 4 **5J-4773** 2J-3506
6P-LGP 4MP, 4TP, 4T-5407/8 140-6787/8# 0.88 22 8E-9379/78 b 4 **5J-4773** 2J-3506
4WP, B6L,
G6G, G6M
6P-LGP F6W, F6Y 0.75 19 177-4551/2 4 **5J-4773** 2J-3506
Foldable
6S 09A, 01C, 06C, 3G-8321/2 0.88 22 4T-3051/2 3 3F-5108 4K-0367
15C1-5000, 3 4F-0391
16C1-5000,
85C, 36D, 38D,
80D, 15E, 02G,
03G, 39H
95E, 46G, 55G, 5J-1419/20 0.88 22 4T-3045/6 6 4F-7827 2J-3506
17H, 21H, 63S 3G-8319/20 0.88 22
4BH, 1DH1-599, 4T-4455/4 4T-4435/6 6 **5J-4773** 2J-3506
2HH, 3JH, 1AH
1DH600-UP, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-3506
1RP, 3EP, CLH,
BHN, P6S, B9B,
D8S
6S-LGP 1AH, 2LH, 3FH, 4T-4455/4 4T-4435/6 6 **5J-4773** 2J-3506
1SP, 3HP, BHG
6SU & 8AH, 1CH, 2NH, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-3506
Custom 4PH, 8BH
Wide SU 2SP, 6GP, 4T-5407/8 8E-9379/78 4 5J-4773** 2J-3506
ECA, S6D
1TP, 3FP, 1WP, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 5J-4773** 2J-3506
3RP, 4AP, 8SP,
9BP, BHM, D6C,
P6A, D2S, MGH,
D4S, B8B, C4N,
C4L
6PAT M3H, M4H, M1H 9W-8874/5 122-8617/18 6 5J-4773 2J-3506
* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 6Y = Impact.
** Uses 5P-8248 washers.
# Hot cupped end bits.
a Quantity per end bit.
b Has angled outer corners. May substitute (2) 3G-4285 with straight outer corner.
NOTE: End bits for the 6S-LGP dozer are designed to match with 8" (203 mm) wide cutting blades. End bits for all other dozers are matched with 10" (254 mm) wide edges.
4Q2010 2-21
Bulldozers / Compactors
D6 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
6A 01C, 06C, 15C, 37D, Wear Plates 5 1J-3106 0.38 10
16C5001-UP, 39D,
81D, 82D, 08E, 09E,
16E, 03F, 04F, 40H
44E, 18H, 47G, 54U Wear Plates 6 3J-3740 0.38 10
3PP, 4BP, 1XP, 3GP, Wear Plates 8 1J-3108 0.31 8
8TP, 1YP, 1BH
6S 09A, 16C1-5000, Wear Plates 5 1J-3108 0.38 10
85C, 80D, 15E, 02G,
03G, 39H
95E Wear Plates 5 2J-8526* 0.38 10
1RP, 3EP Wear Plates 3 3J-3142 0.31 8
1DH, 2HH, 30H, 50H Wear Plates 4 2J-8526 0.38 10
6S-LGP 1AH, 2LH, 3FH, 1SP, 3HP, 55H Wear Plates 4 3J-3380 0.50 12♦
21H Wear Plates 7 1J-3108 0.38 10
6SU 3FP, 1TP, 8SP, 4AP, 1CH, Wear Plates 4 9J-1659 0.50 12♦♦
2NH, 1WP, 3RP, 9BP
1CH, 2NH, 3TH, 4JH, 4PH Wear Plates 4 2J-8526 0.38 10
2SP, ECA, S6D, JCE, S6S Wear Plate — Center 3 9J-1659 0.50 12
Wear Plate — RH 1 9W-2757 0.55 14
Wear Plate — LH 1 9W-2760 0.55 14
6P 3WP, 3XP, B6X, G6N Wear Plates 3 3J-3142 0.31 8
6P-LGP 4MP, B6L Wear Plates 4 3J-3142 0.31 8
* One plate requires modification.
♦ Fit Up — Close.
♦♦ Fit Up — OK.
2-22 4Q2010
Bulldozers / Compactors
D5 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
5A 91H, 96H, 42K FD 0.62 16 1 4T-2978 24 3F-5108 4K-0367
FD 0.75 19 2 4T-3030 12
93H1-3846 FD 0.75 19 1 4T-3008–C 11
98H, 11J, 13J 2 4T-3020–E 9
93H3847-UP FD 0.75 19 2 4T-3004 9 4F-7827 2J-3506
3AH, 2FH, 2TH FD 0.75 19 1 4T-3013 7 5J-4773 a
2 1U-2207 6
6RH FD 0.75 19 2 102-4580 8 4F-7827 2J-3506
5S 90H FD 0.62 16 1 4T-2983–C 3 3F-5108 4K-0367
2 4T-2972–E 4
FD 0.75 19 1 4T-3027–C 3
2 4T-3028–E 4
92H, 97H, 10J, FD 0.75 19 1 4T-3025–C 7
12J 2 4T-3026–E 4
16K, 19R FD 0.75 19 1 4T-3024 28
2BH, 4FH FD 0.75 19 2 3G-6062 7 5J-4773 a 2J-3506
5S Pet♦ 4AH FD 0.75 19 2 4T-0731 5 5J-4773 a 2J-3506
5S-LGP 1ZH, 3KH FD 0.75 19 2 1U-2211 9 5J-4773 a 2J-3506
5P 9WH, 6MH FD 0.62 16 2 3G-9306 6 5J-4771 a 2J-3506
2AH, 2MH, 7AH FD 0.75 19 2 3G-4282 7 5J-4773 a 2J-3506
4GP, 6JP FD 0.62 16 2 8E-9377 7 5J-4773 a 2J-3506
FD 0.75 22 2 4T-6659 7 5J-4773 a 2J-3506
8GP FD 0.62 16 2 140-0983 6 5J-4771 a 2J-3506
5PXL HGP, X1C FD 0.62 16 2 8E-9377 7 5J-4773 a 2J-3506
FD 0.75 22 2 4T-6659 7
W5C FD 0.62 16 2 5Q-8193 6 5J-4773 a 2J-3506
5PXW FD 0.62 16 2 157-7338 7 3F-5108 b 4K-0367
5P-LGP 6PH, 9XH, 8NP FD 0.62 16 2 6Y-5842 8 3F-5108 b 4K-0367
2SH, 1YH FD 0.75 19 2 4T-2315 10 5J-4773 a 2J-3506
4FP, BHY, 6KP FD 0.62 16 2 4T-8940 8 5J-4773 a 2J-3506
8ZP FD 0.62 16 2 142-4914 8 3F-5108 a 4K-0367
5SU 7BH FD 0.75 19 1 4T-6659 7 5J-4773 a 2J-3506
2 9U-8057 4
C — Center Edge E — End Edge FD — Finish Dozing
a Uses 5P-8248 washers.
b Uses 5P-8247 washers.
♦ Petroleum field blade.
4Q2010 2-23
Bulldozers / Compactors
D5 BULLDOZERS
END BITS
GD*
Blade Blade EWL Thickness Finish Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) Qty. Bolts Nuts
5A 91H, 96H, 42K, 9F-7075/6 0.75 19 4T-3049/50 6 c 3F-5108 4K-0367
11J, 13J, 98H, 3G-8295/6 0.88 22
93H1-3846,
93H3847-UP, 4J-8261/2 0.75 19 4T-3041/2 6c 4F-7827 2J-3506
6RH 3G-8297/8 0.88 22
3AH, 2FH, 2TH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a
5S 90H, 92H, 97H, 9F-7073/4 0.75 19 4T-3051/2 6 c 3F-5108 b 4K-0367
10J, 12J, 16K, 3G-8321/2 0.88 22
19R
2BH, 4FH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-3506
5S-Pet♦ 4AH, 4FP 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-3506
5S-LGP 1ZH, 3KH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8**
5P 6MH, 9WH, 8GP 8E-7078/9 4 c 5J-4771 a 2J-3506
6JP, 2AH, 2MH, 7AH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a
5PXL X1C, HGP, W5C, 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-3506
4GP, 6JP
5PXW 6Y-5839/40 3 c 3F-5108 b 4K-0367
5P-LGP 6PH, 9XH, 8NP, 8ZP 6Y-5839/40 3 c 3F-5108 b 4K-0367
1YH, 2SH, BHY, 6KP 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-3506
5SU 7BH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8 4 c 5J-4773 a 2J-3506
* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 9F = Impact.
** Has angled outer corner. May substitute (2) 3G-4285 with straight outer corner.
a Uses 5P-8248 washers.
b Uses 5P-8247 washers.
c Quantity per end bit.
♦ Petroleum field blade.
# Hot cupped end bits.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
5A 91H, 96H, 42K Wear Plates 5 1J-3106 0.38 10
93H, 98H, 11J, 13J 6 1J-3106
5S 90H 5 1J-3108
92H, 97H, 10J, 12J, 19R 6 1J-3108
2BH 4 2J-8526
5P 2AH, 4GP, 6JP 5 3J-3740
9WH 4 3J-3740
W5C, 4GP, HGP Wear Plates 3 2J-8526
5P-LGP BHY Wear Plates 4 1J-3106
2-24 4Q2010
Bulldozers / Compactors
D4 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
4A 12D, 78D, FD 0.62 16 1 4T-2977 18 4F-3654 4K-0367
05F1-2850
05F, 97E, FD 0.62 16 1 4T-2979 13
24F, 65F
10D, 79D, FD 0.62 16 1 4T-2981 23
06F1-11299
52E, 96E, 26F, FD 0.62 16 1 4T-2974–C 5
06F11300-UP, 2 4T-2973–E 6
95G, 33R
6AC, 2GC FD 0.62 16 2 4T-8940 8 5J-4773* 2J-3506
4S 04A, 40D FD 0.62 16 1 4T-2977 18 4F-3654 4K-0367
GD 0.75 19 1 4T-3021
67E, 27F, 94G FD 0.62 16 1 4T-2983–C 3 4F-3654
2 4T-2972–E 4
GD 0.75 19 1 4T-3027–C 3
2 4T-3028–E 4
02A, 25F, 67F FD 0.62 16 1 4T-2980 15 4F-3654
93C FD 0.62 16 1 8A-8580–C 7
2 8A-8581–E 4
2TC, 3CH, 3DC FD 0.62 16 2 4T-3720 6 5J-4773* 2J-3506
4S-LGP 4HC FD 0.62 16 2 4T-8940 8 5J-4773* 2J-3506
84E, 19J, 45J EWL 0.77 19 2 4T-3028 4 4F-3654 4K-0367
0.77 19 1 4T-3029 7
FD 0.62 16 2 4T-2972 4 4F-3654
0.62 16 1 4T-2982 7
4P 6CH FD 0.62 16 2 6Y-5841 6 3F-5108 a 4K-0367
2YH FD 0.62 16 2 4T-6230 6 3F-5108 a 4K-0367
9ZB, 4AC, FD 0.62 16 2 3G-9306 6 5J-4773* 2J-3506
5NH, 7EH
9SH FD 0.62 16 2 104-9634 6 3F-5108 a 4K-0367
8LP FD 0.62 16 2 140-2187 6 3F-5108 a 4K-0367
4P-LGP 4GH, 9YH, 8ZH FD 0.62 16 2 4T-6232 8 3F-5108 a 4K-0367
5EC, 5RH, 7CH FD 0.62 16 2 4T-8940 8 5J-4773* 2J-3506
6DH, 9TH, 8MP FD 0.62 16 2 6Y-5842 8 3F-5108 a 4K-0367
8YP FD 0.62 16 2 141-2238 8 3F-5108 a 4K-0367
4PXL 6XH FD 0.62 16 2 8E-9377 7 5J-4773* 2J-3506
GD 0.77 19 2 4T-6659 7 5J-4773* 2J-3506
C — Center Edge E — End Edge FD — Finish Dozing EWL — Extended Wear Life GD — General Duty
* Uses 5P-8248 washers.
a Uses 5P-8247 washers.
4Q2010 2-25
Bulldozers / Compactors
D4 BULLDOZERS
END BITS
GD*
Blade Blade EWL Thickness Finish Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) Qty. Bolts Nuts
4A 10D, 12D, 78D, 5A-4565/6 0.88 22 4T-3043/4 3c 3F-5108 a 4K-0367
79D, 52E, 96E,
97E, 05F, 06F,
24F, 26F, 65F,
95G, 33R
6AC, 2GC 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4c 5J-4773 a 2J-3506
4S, 02A, 04A, 93C, 9F-7073/4 0.75 19 4T-3051/2 6c 3F-5108 a 4K-0367
4S-LGP 40D, 67E, 84E, 3G-8321/2 0.88 22
25F, 27F, 67F,
94G, 19J, 45J
3DC, 2TC, 4HC, 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4c 5J-4773 a 2J-3506
3CH
4P, 6DH,4GH, 8LP, 0.62 16 (2) 4T-6229 3c 3F-5108 a 4K-0367
4P-LGP 9YH, 8ZH, 8MP, Straight Corner
6CH, 4AC, 2YH, or 6Y-5839/40 a
9TH, 9SH, 8YP Angled Corner
9ZB, 5EC, 7CH, 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4c 5J-4773 a 2J-3506
5RH, 5NH
4PXL 6XH 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4c 5J-4773 a 2J-3506
* Part numbers that begin with: 3G = Hot cupped, Abrasion.
9F, 5A = Impact.
** Hot cupped end bits.
a Uses 5P-8247 washers.
b Has angled outer corner. May substitute (2) 3G-4285 with straight corner.
c Quantity per end bit.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
4A 10D, 79D, 52E, 96E, Wear Plates 1 3J-3115 0.31 8
06F, 26F, 95G, 33R
12D, 78D, 97E, 05F, 2 3J-3116
24F, 65F
4S 02A, 25F, 67F 2 3J-3114
67E 1 3J-3117
4P 9ZB, 4GH, 9SH, 4AC, 4 3J-3116
5NH, 7EH, 6DH, 9TH,
6YH, 8LP
2-26 4Q2010
Bulldozers / Compactors
D3 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
3S 6EH, 15W, 86U FD 0.62 16 2 4T-6230 6 3F-5108 4K-0367
31M, 40V FD 0.62 16 2 4T-6231 7
3P 8SU, 1GP, FD 0.62 16 2 4T-6230 6 3F-5108 4K-0367
2JP, 9RH
96X, 5WH, 8JP FD 0.62 16 2 4T-6232 8
8HP, 8KP FD 0.62 16 2 6Y-5841 6
8XP FD 0.62 16 2 141-0413 8
Super SLGP 5LH FD 0.62 16 2 4T-6230 6 3F-5108 4K-0367 a
1 4T-6231 7
Narrow PLGP FD 0.62 16 2 157-7338 7 3F-5108 4K-0367
a Use 5P-8247 washers. FD — Finish Dozing
END BITS
Blade Blade Thickness Hardware
Model Ser. Number Finish inches mm Qty. Bolt Nut
3P 8HP, 8KP, 2JP, 9RH, 85U, 6EH, (2) 4T-6229 b 0.62 16 3c 3F-5108 4K-0367
96X, 1GP, 5LH or
3S, 3S-LGP 15W, 31M, 40V, 86U, 6EH 6Y-5839/40 a
3P-LGP 5WH, 8XP
a Have angled outer corner.
b Straight corner.
c Quantity per end bit.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
3P-LGP 85U1-8375 Wear Plates 3 3J-3114 0.31 8
85U8376-UP or 1 3J-3117
2 3J-3116
or 5 1J-3108
4Q2010 2-27
Bulldozers / Compactors
END BIT WEAR MATERIAL COMPARISON
This table compares the amount of available wear material for each end bit on the D8 through D11 ‘R’ Series TTT.
These figures should be viewed only as appropriate indicators of wear life, as actual end bit life will vary by job
application.
CUTTING EDGES
Wear Material
Model Type Part Number (R-L) lb kg
D11R ARM – Penetration (75 mm) 223-8127/8 176.8 * 80.2*
Carrydozer Penetration (60 mm) 273-7223/4 139.0 63.0
Endbits EWL (75 mm) 273-7230/1 83.1 37.7
Standard (60 mm) 273-7225/6 73.0 33.1
EWL – Short (75 mm) 273-7232/3 14.0 6.4
Offset (60 mm) 273-7225/6 164.7 74.7
Short End Bit (60 mm) 273-7228/9 13.8 6.3
D11R EEWL 275-5445/6 234.7 106.7
SU, U EWL 8E-4545/6 147.9 67.1
Endbits GD 8E-4543/4 120.5 54.7
Utility (75 mm) 8E-9748/9 81.2 36.8
Utility (60 mm) 8E-9785/6 68.8 31.2
D10R EEWL 275-5941/2 152.9 69.5
SU, U EWL 8E-4541/2 121.5 55.1
Endbits Abrasion/Impact 7T-4688/9 99.4 45.1
Utility (75 mm) 136-8755/4 91.3 41.4
Utility (60 mm) 100-3133/4 76.1 34.5
GD 8E-4198/9 75.0 34.0
Utility (45 mm) 100-3131/2 58.6 26.6
D9R EWL 8E-4539/40 72.1 32.7
SU, U GD 8E-4196/7 55.6 25.2
Endbits Utility (60 mm) 100-3137/8 47.0 21.3
Utility (45 mm) 100-3135/6 35.8 16.2
Finish (45 mm) 6Y-4277/8 25.3 11.5
D8R Utility (50 mm) 100-3139/40 27.1 12.3
A, SU, U EWL 8E-4537/8 26.3 11.9
Endbits GD 8E-4193/4 21.2 9.6
Finish (40 mm) 6Y-4277/8 25.3 11.5
* Steel weight only. Does not account for increased wear life of ARM.
2-28 4Q2010
Bulldozers / Compactors
CUTTING EDGE SUPPORTS
The cutting edge support is an integral part of the blade structure to which the cutting edges and end
bits are bolted. These cutting edge support plates offer the same high quality materials and dimen-
sional precision as the factory originals. Due to the critical nature of the bolted connection between
the GET and dozer blade, a genuine Cat® cutting edge support will guarantee dimensional accuracy.
Since some of these parts are MAO, made as ordered, check your parts system for availability.
Description
These cutting edge support plates are available for factory bulldozer blades on D6R thru D11R Track
Type Tractors. The cutting edge support is an integral part of the blade structure that mounts the cutting
edges and end bits. See the Illustration 1 (Part Identification) below. The cutting edge support consists
of one piece for Straight, Angle, and Carrydozer blades. The Universal and Semi-U blades use a three-
piece cutting edge support system that consists of one support in the center along with another support
for the right and left hand sides. Cutting Edge Supports table on page 2-30 shows the required cutting
edge support part numbers for the corresponding D6R thru D11R bulldozer blades by serial number
prefix.
Installation Instructions
Accurate positioning and welding of a new support is critical. The dimensions for the proper angle
(⍜) and distance (X) from the center of the bolt hole in the cutting edge bolt hole to the lower edge of
the moldboard are located in Illustration 2 (Critical Dimensions) below. For end supports, distance
(X) is from the center of the bolt hole in the bottom row to the lower edge of the moldboard.
Failure to adhere to these dimensions could result in improper fit up as well as poor GET performance.
All gussets and structural supports that were removed must be replaced. Use E7018 welding rod or an
equivalent for all welding.
Illustration 1 Illustration 2
Part Identification Critical Dimensions
4Q2010 2-29
Bulldozers / Compactors
CUTTING EDGE SUPPORTS
2-30 4Q2010
Bulldozers / Compactors
800 SERIES BULLDOZERS
CUTTING EDGES
Blade Blade Blade Thickness Hardware
Model Type Ser. Number inches mm Qty. Part Qty. Bolts Nuts Washers
854 SU, GD 3WL, 3TL* 1.77 45 4 9W-6658** 5 5P-8823 3K-9770 4K-0684
(Tiger 2 9W-6657** 5
790) U-Coal, GD 3WL, 3TL* 1.77 45 3 7J-2966 7 4J-9208 2J-3507 5P-8250
2 135-9671 8
SU, EWL 3WL, 3TL* 2.36 60 4 8E-2087** 5 5P-8823 3K-9770 4K-0684
2 8E-2086** 5
Tiger U-Coal, GD 3WL, 3TL* 1.38 35 2 9W-4398 5 4J-9208 2J-3507 5P-8250
690 2 7T-9126 9
2 9W-6092 6
U-Coal, EWL 3WL, 3TL* 1.57 40 2 9W-3927 5
2 9W-4507 9
2 7J-2959 6
SU, GD 3WL, 3TL* 1.77 45 3 6Y-0018 9 5P-8823 3K-9770 4K-0684
2 9W-6657 5
SU, EWL 3WL, 3TL* 2.36 60 3 6Y-0023 9
2 8E-2086 5
844 U-Coal, 3WL, 3TL* 1.10 28 2 6Y-5540 5 4J-9058 2J-3507 5P-8250
(Tiger EWL 2 4T-6386 7
590) 1 4T-6378 6
U-Coal, 3WL, 3TL* 1.38 35 2 7T-9125 5
EWL 1 9W-6092 6
2 9W-4500 7
SU, GD Australian 1.77 45 3 9W-3928 6 5P-8823 3K-9770 4K-0684
2 9W-6657 5
SU, EWL 3WL, 3TL* 2 9W-3927 5 4J-9058 2J-3507 5P-8250
2 112-2475 6
1 7J-2980 7
SU, EEWL Australian 2.36 60 3 135-9625 6 5P-8823 3K-9770 4K-0684
2 8E-2086 5
836H U 1.00 25 2 4T-2986–I 5 4J-9058 2J-3507
2 4T-3422–E 7
1 4T-3423–C 6
SU 1.00 25 3 4T-3420–C 5 6F-0196 2J-3505
2 4T-8797–E 6
S 1.00 25 3 4T-2889 9 6F-0196 2J-3505
836 None 1.00 25 3 4T-2889 9 6F-0196 2J-3505
834H SU 1.00 25 3 4T-3420–C 5 6F-0196 2J-3505
2 4T-8797–E 6
834G SU 2.36 60 2 195-7272–C 7 4F-4042 2J-3507
2 366-2152–E 5
834G, S 1.12 28.5 1 6Y-5539–C 12 4F-4042 2J-3507
834H 2 4T-6386–E 7
2.36 60 1 113-0322–C 12 4F-4042 2J-3507
2 195-7272–E 7
U 1.57 40 3 7J-2960 6 4F-4042 2J-3507
2.36 60 3 138-0791
835, S 27K, 36G, 1.00 25 2 4T-6515# 12 5J-2409
834 96G
834 U 14B 1.00 25 2 4T-8797–C a 6 6F-0196
2 4T-8798–E b 7
834C, 834B, 64G 1.00 25 2 4T-2889 9 6F-0196
824C
834, 825, 93G 1.00 25 1 4T-6531–C 10 6F-0196
824 2 4T-6532–E 6
826, 826C, 97X, 90K, 1.00 25 2 4T-6515 12 5J-2409 2J-3505
826G, 826H 2GP
825C F 89X 1.00 25 3 4T-6238 8 4F-4042 2J-3507
825G 4JP 1.00 25 4 4T-6532 6 6F-0196 2J-3505
825H S 1.00 25 2 4T-2994–E 8 4F-4042 2J-3507
1 4T-6238–C
C — Center Edge E — End Edge I — Intermediate Edge
* Balderson serial number.
** Australian built blades use a 6V-8360 bolt.
# Optional 12" (305 mm) wide one piece edge 4T-6455 is available.
a 135-6723 same as 4T-8797 with 1" (25 mm) bolt holes.
b 135-6724 same as 4T-8798 with 1" (25 mm) bolt holes.
4Q2010 2-31
Bulldozers / Compactors
800 SERIES BULLDOZERS
CUTTING EDGES — Continued
Blade Blade Blade Thickness Hardware
Model Type Ser. Number inches mm Qty. Part Qty. Bolts Nuts Washers
824C, S 35G 1.00 25 2 4T-6514 10 5J-2409 2J-3505
824G, 2HP 1.00 25 2 4T-3420 5 6F-0196 2J-3505
824H 2 122-9227 6
824S 88H 1.13 29 2 4T-6448 10 4J-9058 2J-3507
824H SU 2.36 60 3 364-6552 5 4F-4042
3 364-6553 2J-3507
816, 816F 51K 1.00 25 1 4T-6531–C 10 6F-0196 2J-3505
2 4T-6532–E 6
41S, 15Z, 0.75 19 1 4T-2922–C 5 5J-2409
3ZP 2 4T-2923–E 7
815 24K1-1044, 0.75 19 1 4T-3008–C 11 3F-5108 4K-0367
59E1-341 2 4T-3020–E 9
24K1045-UP, 59E342-UP 0.75 19 2 4T-3004 9 4F-7827 2J-3506
39S, 17Z 0.75 19 2 4T-3012 10 5J-4773
814, 814F S 56D, 23K 0.75 19 1 4T-2921–C 7 6F-0196 2J-3505
2 4T-2922–E 5
1.00 25 1 4T-2993–C 7
2 4T-2992–E 5
36S, 3YP 0.75 19 1 4T-2922–C 5 5J-2409*
2 4T-2923–E 7
C — Center Edge E — End Edge
* Uses 5P-8249 washer.
END BITS
General Duty (GD)*
Blade Blade Thickness Finish Hardware
Model Type Ser. Number (R-L) inches mm (R-L) Qty. Bolts Nuts Washers
854 U-Coal 3WL**, 3TL** 1.57 40 135-9672/3*** 5 4J-9208 2J-3507 5P-8250
(Tiger SU, GD 3WL**, 3TL** 1.77 45 100-3131/2 7 5P-8823 3K-9770 4K-0684
790) 8E-4198/9 2.17 55
SU, EWL 3WL**, 3TL** 2.36 60 100-3133/4 7
8E-4541/2 2.76 70
Tiger U-Coal, GD 3WL**, 3TL** 1.38 35 135-9698/9 6 4J-9208 2J3057 5P-8250
690 SU, GD 3WL**, 3TL** 8E-4199/8 2.17 55 7 5P-8823 3K-9770 4K-0684
SU, EWL 3WL**, 3TL** 2.76 70 8E-4541/2 7
844 U-Coal 3WL**, 3TL** 1.10 28 135-9669/70 5 4J-9058 2J-3507 5P-8250
(Tiger SU, GD 3WL**, 3TL** 1.77 45 100-3135/36 7 4J-9058 2J-3507 5P-8250
590) 8E-4196/7 1.97 50
Australian 2.17 55 8E-4199/8 7 5P-8823 3K-9770 4K-0684
SU, EWL 3WL**, 3TL** 2.36 60 100-3137/8 7 4J-9058 2J-3507 5P-8250
8E-4539/40 2.56 65
Australian 2.76 70 8E-4541/2 7 5P-8823 3K-9770 4K-0684
836H U, SU, S 3G-8293/4 0.88 22 4T-6505/6 7a 6F-0196 2J-3505
4J-8843/4 1.12 28
3G-8315/6 1.12 28
834H SU 3G-8293/4 0.88 22 4T-6505/6 7a 6F-0196 2J-3505
4J-8843/4 1.12 28
3G-8315/6 1.12 28
834G SU 2.36 60 113-0334 7 4F-4042
113-0336 2J-3507
834G, S 1.57 40 6Y-4277/8 7 4F-4042 2J-3507
834H 2.36 60 113-0334/36 b
U 151-7476/7 1.77 45
138-0792/3 2.36 60
835, 834 27K, 14B, 36G 3G-8293/4 0.88 22 4T-6505/6 7a 6F-0196 2J-3505
64G, 93G, 96G 4J-8843/4 1.12 28
3G-8315/6 1.12 28
826, 826C, 97X, 90K,
826G 2GP, 93G
825G 4JP
* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 9J = Impact.
** Balderson serial number.
*** End bit and edge.
a Quantity per end bit.
b 4.72 inch (120 mm) end bit assembly available, Part Number 113-0332/33.
2-32 4Q2010
Bulldozers / Compactors
800 SERIES BULLDOZERS
END BITS
General Duty (GD)*
Blade Blade Thickness Finish Hardware
Model Type Ser. Number (R-L) inches mm (R-L) Qty. Bolts Nuts Washers
825C 89X 3G-8317/8 1.18 30 4T-6239/40 7a 4F-4042 2J-3507
825H S 3G-8287/8 1.12 28
9J-1477/8 1.12 28
824S, 824G, 35G, 64G, 93G 3G-8293/4 0.88 22 4T-6505/6 7a 6F-0196 2J-3505
824H 2HP 4J-8843/4 1.12 28
3G-8315/6 1.12 28
88H 3G-8289/90 1.38 35 7a 4J-9208 2J-3507
3G-8281/2 1.57 40
824H SU 2.36 60 109-9027 7 4F-4042
109-9029 2J-3507
816, 814S, 56D, 51K, 23K 3G-8293/4 0.88 22 4T-6505/6 7a 6F-0196 2J-3505
814F, 816F 4J-8843/4 1.12 28
3G-8315/6 1.12 28
36S, 41S, 4T-6241/2 7a 5J-2409
3YP, 3ZP
815S, 815F 39S 3G-8319/20 0.88 22 4T-3045/6 6a 5J-4773 2J-3506
5J-1419/20 0.88 22
24K1-1044 9F-7075/6 0.75 19 4T-3049/50 6a 3F-5108 4K-0367
59E1-341 3G-8295/6 0.88 22
24K1045-UP 4J-8261/2 0.75 19 4T-3041/2 6a 4F-7827 2J-3506
59E342-UP 3G-8297/8 0.88 22
* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 9J = Impact.
a Quantity per end bit.
4Q2010 2-33
Bulldozers / Compactors
800 SERIES BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
835 27K Wear Plate 1 3J-3141 0.31 8
834G, 834H Center 151-7527 0.47 12
U-Blade
834G, 834H RH 151-7528 0.47 12
U-Blade
834G, 834H LH 151-7529 0.47 12
U-Blade
834C 96G Wear Plate 1 3J-3142 0.31 8
834C 64G Push Plate 1 4J-5622 0.79 20
826 97X, 90K Wear Plate 1 3J-3141 0.31 8
825 89X, 93G
824C 64G Push Plate 1 4J-5622 0.79 20
824C, 824G, 824H 2HP, 35G Push Plate 1 5J-2663 0.79 20
824F 93G Wear Plate 1 3J-3141 0.31 8
824 88H Wear Plate 4 2J-8523 0.47 12
2 6J-0164
816 41S, 51K Wear Plate 1 3J-3141 0.31 8
SOLE PLATES
Blade Blade Blade Thickness Hardware
Model Type Ser. Number inches mm Qty. Part Qty.* Bolts Nuts Washers
854 GD Australian 1.77 45 4 9W-6658*** 5 6V-8360 3K-9770 4K-0684
(Tiger 2 9W-6657*** 6V-8360 3K-9770
790) SU, EWL 3WL, 3TL** 1.97 50 4 135-9668 7 3R-2299 3K-9770 4K-0684
U, GD 3WL, 3TL** 1.97 50 5 135-9668 7 3R-2299 3K-9770
SU, EWL Australian 2.36 60 4 8E-2087*** 5 6V-8360 3K-9770 4K-0684
2 8E-2086*** 5 6V-8360 3K-9770
Tiger 690 SU, EWL/GD 3WL, 3TL** 1.97 50 3 135-9668 7 3R-2299 3K-9770 4K-0684
844 SU, GD Australian 1.77 45 3 9W-3928 6 6V-8360 3K-9770 4K-0684
(Tiger 2 9W-6657 5 6V-8360 3K-9770
590) SU/U, EWL/GD 3WL, 3TL** 1.97 50 3 135-9668 7 3R-2299 3K-9770
SU, EWL Australian 2.36 60 3 135-9625 6 6V-8360 3K-9770
2 8E-2086 5 6V-8360 3K-9770
834H U 1.77 45 2 185-6509 7 6F-0196 2J-3505 5P-8249
S 1.77 45 2 100-6356 4 1J-5607 2J-3507 5P-8250
834G S, U 1.77 45 2 100-6356 4 1J-5607 2J-3507 5P-8250
834 U 14B 1.00 25.4 2 4T-8799 7 6F-0196 2J-3505
S 36G, 96G 1.00 25.4 2 4T-6650 8 5J-4772 2J-3505
1 4T-6651 9 5J-4772 2J-3505
834, 824 C 64G 1.00 25.4 2 4T-6645 6 5J-4772 2J-3505
824G S 2HP 1.00 25.4 3 4T-8799 7 5J-4772 2J-3505
824H S 3 4T-8799 7 6F-0196 2J-3505 5P-8249
824 S 35G1-222 1.00 25.4 3 7T-3491 7 5J-4773 2J-3506
35G 223-UP 1.00 25.4 3 7T-3492 7 6V-0196 2J-3505
814 S 36S, 3YP 0.75 19 2 4T-3018 4 6V-0196 2J-3505
23K, 56D 0.75 19 2 4T-3019 5 6V-0196 2J-3505
* Per plate.
** Balderson serial number.
*** Australian built edges use a 6V-8360 bolt.
2-34 4Q2010
COMPACTOR FEET (EARTHMOVING)
All compactor tip options are weld-on except as footnoted.
4Q2010
COMPACTORS
2-35
Bulldozers / Compactors
Bulldozers / Compactors
COMPACTORS
2-36 4Q2010
816
For use Retip
Wheel Ref Wheel with Template
Wheel Part Position on O.D. × Diam ×Thickness Tip Part Hard Cleaner Media
Number Machine (ref) inches mm Tip Type Number Ext. Rim Facing Wear Bars Fingers Number
110-4008 All 4 51.1 × 40 × 0.787 1298 × 1016 × 20 6.25" Plus 315-3441 Y N Y 283-1016
119-2234 51.1 × 40 × 0.787 1298 × 1016 × 20 none (smooth wheel) N/A N N
(10) 4E-3525
128-8109 Forward 51.1 × 40 × 0.787 1298 × 1016 × 20 6.25" Chopper (10) 4E-3526 N N
(10) 4E-3525
128-8110 Reverse 51.1 × 40 × 0.787 1298 × 1016 × 20 6.25" Chopper (10) 4E-3526 N N (4) 194-3406
165-4965 All 4 51.1 × 40 × 0.787 1298 × 1016 × 20 6.25" Plus (20) 315-3441 N N (4) 194-3407 N
165-4966 51.1 × 40 × 0.787 1298 × 1016 × 20 none (smooth wheel) N/A N N (4) 194-3406
204-9376 All 4 51.1 × 40 × 0.787 1298 × 1016 × 20 6.25" Plus (20) 315-3441 N Y (4) 194-3407 Y
(4) 194-3406
211-4757 All 4 51.1 × 40 × 0.787 1298 × 1016 × 20 6.25" Plus (20) 315-3441 N N (4) 194-3407 Y
(4) 194-3406
216-9603 51.1 × 40 × 0.787 1298 × 1016 × 20 none (smooth wheel) N/A N N (4) 194-3407
2Q-3554 All 4 51.1 × 40 × 0.787 1298 × 1016 × 20 6.25" Plus (20) 315-3441 N N Y
4Q2010
COMPACTORS
2-37
Bulldozers / Compactors
826
2-38
Cleaner
For use Finger Retip
Wheel Ref Wheel with Installation Template
Wheel Part Position on O.D. × Diam × Thickness Tip Part Hard Cleaner Media Media
Number Machine (ref) inches mm Tip Type Number Ext. Rim Facing Wear Bars Fingers Number Number
4Q2010
COMPACTORS
(5) 2Q-3636
350-3516 All 4 60.3 × 40 × 0.984 1532 × 1016 × 25 7" Step Tip (28) 352-5936 Y Y (5) 159-8891 Y
(5) 2Q-3636
347-4720 All 4 60.3 × 48 × 0.984 1532 × 1219 × 25 7" Step Tip (30) 352-5936 Y Y (5) 193-2990 Y REHS4157
Left front, (12) 4E-0409 (5) 2Q-3636
293-9121 Right rear 60.3 × 48 × 0.984 1532 × 1219 × 25 6.25" Chopper (12) 4E-0410 Y Y (5) 193-2990 N
Right front, (12) 4E-0409 (5) 2Q-3636
293-9122 Left rear 60.3 × 48 × 0.984 1532 × 1219 × 25 6.25" Chopper (12) 4E-0410 Y Y (5) 193-2990 N
Bulldozers / Compactors
(5) 2Q-3636
191-0740 All 4 60.3 × 48 × 0.984 1532 × 1219 × 25 6.25" Plus (25) 315-3441 Y Y (5) 193-2990 Y
(5) 2Q-3636
164-7970 All 4 60.3 × 48 × 0.984 1532 × 1219 × 25 6.25" Plus (25) 315-3441 Y N (5) 193-2990 Y
(5) 2Q-3636
242-1899 All 4 60.3 × 40 × 0.984 1532 × 1016 × 25 6.25" Plus (24) 315-3441 Y N (5) 159-8891 Y
(5) 2Q-3636
262-6061 All 4 60.3 × 40 × 0.984 1532 × 1016 × 25 6.25" Plus (24) 315-3441 Y Y (5) 159-8891 Y
(5) 2Q-3636
10R-9527 All 4 60.3 × 48 × 0.984 1532 × 1219 × 25 7" Step Tip (30) 352-5936 Y Y (5) 193-2990 Y REHS4969 REHS4157
(5) 2Q-3636
10R-9528 All 4 60.3 × 40 × 0.984 1532 × 1016 × 25 7" Step Tip (28) 352-5936 Y Y (5) 159-8891 N
(5) 2Q-3636
20R-0224 All 4 60.3 × 48 × 0.984 1532 × 1219 × 25 7" Paddle (30) 347-7899 Y Y (5) 159-8891 N REHS4979
7" Paddle (15) 347-7899 (5) 2Q-3636
20R-0225 All 4 60.3 × 48 × 0.984 1532 × 1219 × 25 Bi-Directional (15) 349-1634 Y Y (5) 159-8891 N REHS4979
836
Cleaner Wire
Wheel For use Finger Duo Protection Retip
Wheel Position Ref Wheel with Installation Cone Available Installation Template
Part on Machine O.D. × Diam × Thickness Tip Part Ext. Hard Wear Cleaner Media Seal Wire Media Media
Number (ref) inches mm Tip Type Number Rim Facing Bars Fingers Number Rimplates Protection Number Number
(8) 183-9352
318-0564 All 4 67.7 × 55 × 0.984 1720 × 1397 × 25 7" Step Tip (40) 352-5936 Y Y (8) 189-6516 Y REHS4187 Y (16) 352-2351 REHS4980 REHS4158
(8) 348-7151
330-4599 All 4 69.7 × 55 × 0.984 1770 × 1397 × 25 7" Step Tip (40) 352-5936 Y Y (8) 348-7152 Y N/A Y (16) 352-2351 REHS4980
none (8) 348-7151
347-1981 69.7 × 55 × 0.984 1770 × 1397 × 25 (smooth wheel) N/A Y N (8) 348-7152 Y
Left front, 6.25" (14) 111-8232 (8) 348-7151
347-1983 Right rear 69.7 × 55 × 0.984 1770 × 1397 × 25 Chopper (14) 111-8236 Y N (8) 348-7152 N Y
Right front, 6.25" (14) 111-8232 (8) 348-7151
347-1984 Left rear 69.7 × 55 × 0.984 1770 × 1397 × 25 Chopper (14) 111-8236 Y N (8) 348-7152 N Y
(8) 183-9352
165-4970 All 4 67.7 × 55 × 0.984 1720 × 1397 × 25 6.25" Plus (35) 315-3441 Y N (8) 189-6516 Y Y
(8) 183-9352
190-3731 All 4 67.7 × 55 × 0.984 1720 × 1397 × 25 6.25" Plus (35) 315-3441 Y Y (8) 189-6516 Y Y
(8) 183-9352
10R-9526 All 4 67.7 × 55 × 0.984 1720 × 1397 × 25 7" Step Tip (40) 352-5936 Y Y (8) 189-6516 Y REHS4187 Y (16) 352-2351 REHS4980 REHS4158
(8) 183-9352
10R-9687 All 4 67.7 × 55 × 0.984 1720 × 1397 × 25 7" Step Tip (40) 352-5936 Y Y (8) 189-6516 Y REHS4187 N (16) 352-2351 REHS4980 REHS4158
(8) 183-9352
20R-0226 All 4 67.7 × 55 × 0.984 1720 × 1397 × 25 7" Paddle (40) 347-7899 Y Y (8) 189-6516 Y REHS4187 N REHS4963
7" Paddle (20) 347-2899 (8) 183-9352
20R-0227 All 4 67.7 × 55 × 0.984 1720 × 1397 × 25 Bi-Directional (20) 349-1634 Y Y (8) 189-6516 Y REHS4187 N REHS4963
4Q2010
COMPACTORS
2-39
Bulldozers / Compactors
Bulldozers / Compactors
BULLDOZER BLADES
Cat bulldozer blades are designed for tough dozing, specifications that provide long wear life and the strength
reclamation and push-loading jobs. They are available in necessary to be compatible with the increased productivity
six configurations. (See descriptions below.) Cutting of Cat bulldozer blades.
edges and end bits are designed and manufactured to
Straight (S) Blade is a good general purpose blade for Cushion (C) Blade is a relatively narrow blade designed
most dozing applications. primarily for pushing scrapers.
Universal (U) Blade is designed with large “wings” to Power Angling and Tilt (P or PAT) Blade is the most
more efficiently carry large loads over long distances. versatile blade. Available for D6 and smaller models.
Available only for D7 and larger models.
Angle (A) Blade is an economical, light to medium
Semi-U (SU) Blade is basically a straight blade with duty blade designed for use on D8 and smaller machines
small wings to provide a blade with better load carry- where the ability to side-cast is desired.
ing characteristics. Available for D5 and larger models.
CUTTING EDGES
Features Benefits
✔ Made from rolled DH-2™ steel. ✔ High strength to resist breaking.
✔ Thru-hardened. ✔ Maximum wear life.
✔ Optional thicknesses. ✔ Permits matching edge to job.
✔ Multi-section for wide blades. ✔ Easier handling and storage. Sections can be replaced,
switched, or propellered to get maximum use.
2-40 4Q2010
Bulldozers / Compactors
BULLDOZER END BITS
END BITS
EWL
General Duty (GD) — have a contoured design which matches the cut-
ting edge thickness in the bolt hole area and is thicker, but not as thick as
the EWL, in the wear area that extends beyond the support. They are well
suited to most dozing applications (9W, 8E part numbers in GD column).
It is made from thru-hardened DH-3™ steel for the D7-D11 machines and
thru-hardened DH-2 steel for the D3-D6 machines.
General Duty
Utility — have a flat plate design for use in applications where face wear
is a problem or where initial price is the main purchase criteria. Provides
good corner protection in high impact, high abrasion materials. It is made
from thru-hardened DH-2 rolled plate steel.
Finish Dozing (Level Cut) — match the depth of cut of the cutting
edges and protect the blade corner in low impact, low abrasion materials.
They are recommended for finish and semi-finish dozing. Not available for
the largest dozers. It is made from thru-hardened DH-2 rolled plate steel.
Finish Dozing
4Q2010 2-41
Bulldozers / Compactors
BULLDOZER END BITS AND EDGES
Heavy Duty Mining End Bits and Edges — for high-abrasion and/or
high-impact applications where penetration is not a problem. These sys-
tems will significantly extend edge and end-bit life and provide increased
resistance to breakage.
This is a three-piece system with a center edge 2-3/8" (60 mm) thick, and
right- and left-end edge/end-bits which are 4-3/4" (120 mm) thick. The
end-edge/end-bits are made from two 2-3/8" (60 mm) thick sections
welded together at the end-bit position. Thicker end bits are required to
match end bit to cutting-edge wear patterns.
Heavy Duty Mining
The heavy duty options are made from Cat DH-2 flat-plate sections which
are through-hardened for superior strength and wearlife capabilities.
2-42 4Q2010
Bulldozers / Compactors
BULLDOZERS
Cat cutting edge hardware meets or exceeds requirements for SAE Grade 8
threaded fasteners. Bolt heads are dome-shaped for added strength and
wear-resistance. Nuts are thru-hardened to match the strength of the bolts.
See page 2-52 for hardware data and part numbers.
Wear plates and push plates provide an inexpensive way to prolong bull-
dozer service life. Both types of plates are formed of high strength alloy
steel. They are curved to fit the contour of the moldboard and are easily
attached with fillet welds.
Wear Plates
Used to repair damage to small areas or to resurface an entire moldboard.
In extremely abrasive or severe impact conditions, it may even be desir- Wear Plates
able to install wear plates on new dozers before they are put into service.
Push Plates
Push plates are installed on dozers used for the dual purpose of push load-
ing scrapers and for dozing.
Push Plates
Dozer wear bars come in six lengths to allow a customer to tailor the
placement of the wear protection while minimizing the amount of throw-
away iron. Part numbers for the various lengths are shown below:
Length
Part Number Feet mm Wear Bars
107-3386 8 2438
107-3387 9 2743
107-3388 11 3353
107-3389 12 3658
107-3390 13 3962
107-3391 15 4572
Dozer wear bars are made from DH-2 steel alloy, thru-hardened for greater
wear resistance and strength. Core hardness of the bars will be between
45-52 Rc (2.7-3.0 BR). If the bars are to be flame cut, the burn zone must be
preheated to 302-446° F (150-230° C). It is also recommended to preheat
the bars to the 302-446° F (150-230° C) temperature when welding on top
of the liner. The bars are to be positioned so the bevel is next to the liner as
shown at right.
4Q2010 2-43
Bulldozers / Compactors
BULLDOZERS
COMPACTORS (EARTHMOVING)
Caterpillar offers three tip options for earth-fill compactors, each designed
for effective compaction in different materials.
Tamping Foot
Cat tamping feet are designed for use in low impact conditions. They are
manufactured from DH-2 steel and heat-treated for strength and long
wear life.
COMPACTORS (LANDFILL)
Caterpillar offers one blade and two tip options for landfill compactors.
Step Tip
2-piece DH-2 steel tip provides exceptional traction and compaction without
fluffing material that has already been compacted. Ribs provide extra wear
life and compaction. Weldable cast base allows replacement of tips with
reduced pre-heat. 10,000 hours or 4 years of service life prorated warranty.
2-44 4Q2010
Bulldozers / Compactors
BULLDOZERS
4Q2010 2-45
Bulldozers / Compactors
BULLDOZER CONVERSION PROCEDURE
Outline
A) Determine cutting edge dimensions.
B) Select cutting edges from dimensional charts.
C) Select end bits from dimensional charts.
D) Modify cutting edges and/or end bit support if necessary.
E) Install System.
D C B T
Obtain the following dimensions from the competitive edges as
TYPE 2 shown on the drawings.
1. Length (L)
L 2. Width (W) — Original width is best obtained from competitive
W
A literature or parts books. If that is not possible, find a new edge
B C D T
or one that is only half worn. Measure the width from bolt hole
TYPE 3 centers to unworn surface and double that dimension. As a last
(Edges with offset bolt holes only)
resort, measure the cutting edge support from the center ring of
the bolt holes to the point where the support begins to curve.
L Usually this point is where the moldboard is welded to the sup-
A
port. See Figure 1. This is dimension “X” in Figure 1. Double it
W
to determine the approximate maximum edge width which can
D C B T be used.
TYPE 4
Some bulldozers have cutting edges that bolt directly to the
Moldboard
moldboard as shown in Figure 2. In this case, measure from the
Cutting Edge
Support
center line of the bolt holes to the point where the moldboard
begins to curve. This point is determined by laying a straight
edge on the moldboard and sliding it upward until it no longer
X lays flat on the moldboard. This measurement is “Y” in Figure 2.
Double the value of “Y” to determine the maximum width edge
which can be used.
CAUTION: Before modifying edges to fit a competitive bulldozer,
Y
FIGURE 1 bolt an edge of the width selected to the bulldozer to
make sure that the edges will bolt up properly.
FIGURE 2
2-46 4Q2010
Bulldozers / Compactors
BULLDOZER CONVERSION PROCEDURE
6. Bolt Size Required — Sometimes it is necessary to drill supports oversize to accept Cat edges.
7. Number of Bolt Holes — Count only the bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing.
Some competitive bulldozers and some edges for Cat D10 and D11 Bulldozers have extra bolt
holes between the last two on the ends of the edges. As a result, the last three holes on each end
are 3" (76.2 mm) apart. The dimensional tables included in this guide ignore the extra holes. Do
not worry about them when measuring competitive edges.
Once all pertinent dimensions are obtained, go to Step 3.
Step 3
Refer to the Bulldozer Cutting Edge Conversion Tables. Find the section of the chart which most
closely matches the maximum edge width (W) needed.
NOTE: Do not select a chart which exceeds the maximum edge width by more than 0.75" (19 mm).
Find an edge with the same bolt hole size and spacing, and total length needed ±0.25" (7 mm).
Make sure that the edge thickness is close to what is correct for the machine.
If no edge can be found, go to Step 4.
Step 4
Find an edge with the same hole size and spacing, but longer length. Cut the edge to size.
NOTE: It may be possible to reduce waste by making two edges to fit competitive machines from
one Cat edge. To determine if this can be done, add the number of bolt holes on 4"
(101.6 mm) or 6" (152.4 mm) spacing from both competitive edges.
4Q2010 2-47
Bulldozers / Compactors
BULLDOZER CONVERSION PROCEDURE
≠B
A≠ Extended Wear Life Edges
(Different Part # for RH & LH edges)
2-48 4Q2010
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
4Q2010 2-49
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
2-50 4Q2010
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
4Q2010 2-51
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
2-52 4Q2010
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
4Q2010 2-53
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
2-54 4Q2010
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
4Q2010 2-55
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
2-56 4Q2010
Bulldozers / Compactors
BULLDOZER END BITS CONVERSION PROCEDURE
Cutting
End Bit Edge
Support Widths End Bits (R-L)
9J-6977 16" 8E-4541-2, 7T-4689-8
13" 3G-7763-4, 1U-1545-6
4T-9579 16" 7T-4094-5
13" 3G-8283-4, 3G-8291-2, 4J-8723-4
3G-6415 13" 7T-4091-90
10" 3G-8287-8, 3G-8317-8, 9J-1477-8, 4T-8089-90
4Q2010 2-57
Bulldozers / Compactors
DIMENSIONS — BULLDOZER END BITS
L1 The following illustrations show the different types of bolt hole patterns. In
C D E F G the following charts, the type is coded to better describe the end bit. The key
A
to the code is in the following example:
W1 W2
Type 2 E L
L2
L stands for left side and
TYPE 1 R means right side end bit.
B
W1 W2
G H I J
L2
TYPE 3
L1
A
C D E F
B
W1 W2
G H I J K
L2
TYPE 4
2-58 4Q2010
BULLDOZER END BIT DIMENSIONS — inch (mm)
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
15.98 16.69 4EL 2.50 275-5446 2.24 4.25 2.00 2.95 9.29 2.95 2.97 2.95 7.09 2.95 26.26 32.42 20.63
(406.0) (424.0) (64.0) (57.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (180.0) (75.0) (667.0) (823.5) (524.0)
15.98 16.69 4ER 2.50 275-5445 2.24 4.25 2.00 2.95 9.29 2.95 2.97 2.95 7.09 2.95 26.26 32.42 20.63
(406.0) (424.0) (64.0) (57.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (180.0) (75.0) (667.0) (823.5) (524.0)
15.98 16.30 3EL 1.97 275-5942 2.05 3.92 3.11 9.29 2.95 2.00 2.95 7.09 2.95 22.72 28.58 18.78
(406.0) (414.0) (50.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (577.0) (726.0) (477.0)
15.98 16.30 3ER 1.97 275-5941 2.05 3.92 3.11 9.29 2.95 2.00 2.95 7.09 2.95 22.72 28.58 18.78
(406.0) (414.0) (50.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (577.0) (726.0) (477.0)
15.9 14.17 4UL 1.125 8E-9748 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.70 30.31 15.55
(406.0) (360.0) (36.5) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (653.0) (770.0) (395.0)
15.9 14.17 4UR 1.125 8E-9749 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.70 30.31 15.55
(406.0) (360.0) (36.5) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (653.0) (770.0) (395.0)
15.9 14.60 4UR 1.125 2.36 8E-9785 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.53 30.31 15.59
(406.0) (371.0) (36.5) (60.0) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (648.5) (770.0) (396.0)
15.9 14.60 4UL 1.125 2.36 8E-9786 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.53 30.31 15.59
(406.0) (371.0) (36.5) (60.0) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (648.5) (770.0) (396.0)
15.9 16.22 3ER 1.25 3.35 8E-4545 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.43 32.32 20.37
(406.0) (412.0) (32.0) (85.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (646.0) (821.0) (517.5)
15.9 16.22 3EL 1.25 3.35 8E-4546 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.43 32.32 20.37
(406.0) (412.0) (32.0) (85.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (646.0) (821.0) (517.5)
15.9 15.82 4GR 1.25 2.76 8E-4543 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.39 33.84 21.06
(406.0) (402.0) (32.0) (70.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (645.0) (859.5) (535.0)
15.9 15.82 4GL 1.25 2.76 8E-4544 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.39 33.84 21.06
(406.0) (402.0) (32.0) (70.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (645.0) (859.5) (535.0)
15.9 15.82 3EL 1.25 2.76 8E-4542 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 22.71 28.42 18.42
(406.0) (402.0) (32.0) (70.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (577.0) (722.0) (468.0)
15.9 15.82 3ER 1.25 2.76 8E-4543 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 22.71 28.42 18.42
(406.0) (402.0) (32.0) (70.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (577.0) (722.0) (468.0)
15.9 15.9 3UR 1.25 1.77 100-3131 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (32.0) (45.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 15.9 3UL 1.25 1.77 100-3132 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (32.0) (45.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 15.9 3UR 1.25 2.36 100-3133 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (32.0) (60.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 15.9 3UL 0.98 2.36 100-3134 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (25.0) (60.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 14.65 5GL 1.25 2.17 8E-4198 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 21.50 28.70 19.17
(406.0) (372.0) (32.0) (55.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (546.0) (729.0) (487.0)
15.9 14.65 5GR 1.25 2.17 8E-4199 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 21.50 28.70 19.17
(406.0) (372.0) (32.0) (55.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (546.0) (729.0) (487.0)
15.74 13.46 3HR 1.25 2.36 7T-4688 2.05 3.94 3.11 7.08 2.95 2.01 4.96 7.08 2.95 19.99 27.20 17.79
(400.0) (342.0) (32.0) (60.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (126.0) (180.0) (75.0) (508.0) (691.0) (452.0)
4Q2010
15.74 13.46 3HL 1.25 2.36 7T-4689 2.05 3.94 3.11 7.08 2.95 2.01 4.96 7.08 2.95 19.99 27.20 17.79
(400.0) (342.0) (32.0) (60.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (126.0) (180.0) (75.0) (508.0) (691.0) (452.0)
DIMENSIONS — BULLDOZER END BITS
2-59
Bulldozers / Compactors
BULLDOZER END BIT DIMENSIONS — inch (mm) continued
2-60
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
13.14 12.99 3FR 0.98 1.57 6Y-4277 3.20 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.51 23.30 12.99
(334.0) (330.0) (25.0) (40.0) (81.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (445.0) (592.0) (330.0)
4Q2010
13.14 12.99 3FL 0.98 1.57 6Y-4278 3.20 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.51 23.30 12.99
(334.0) (330.0) (25.0) (40.0) (81.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (445.0) (592.0) (330.0)
12.99 12.99 1F 0.98 1.12 4T-6389 6.50 4.82 3.00 3.76 3.76 3.00 23.17 23.17 12.99
(330.0) (330.0) (25.0) (28.5) (165.0) (122.5) (76.2) (95.5) (95.5) (76.2) (588.4) (588.4) (330.0)
12.99 12.44 3UR 1.25 1.375 3G-7763 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.94 24.02 14.25
(330.0) (316.0) (32.0) (35.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (532.0) (610.0) (362.0)
12.99 12.44 3UL 1.25 1.375 3G-7764 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.94 24.02 14.25
(330.0) (316.0) (32.0) (35.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (532.0) (610.0) (362.0)
Bulldozers / Compactors
12.99 12.44 3HR 1.25 1.57 1U-1545 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.47 26.65 14.25
(330.0) (316.0) (32.0) (40.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (520.0) (677.0) (362.0)
12.99 12.44 3HL 1.25 1.57 1U-1546 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.47 26.65 14.25
(330.0) (316.0) (32.0) (40.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (520.0) (677.0) (362.0)
DIMENSIONS — BULLDOZER END BITS
12.99 12.75 3HR 0.98 1.57 3G-8281 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (40.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 12.75 3HL 0.98 1.57 3G-8282 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (40.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 12.75 3HR 0.98 1.38 3G-8289 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (35.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 12.75 3HL 0.98 1.38 3G-8290 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (35.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 13.18 3ER 0.98 2.56 8E-4539 1.75 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 19.13 23.89 15.47
(330.0) (335.0) (25.0) (65.0) (44.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (486.0) (607.0) (393.0)
12.99 13.18 3EL 0.98 2.56 8E-4540 1.75 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 19.13 23.89 15.47
(330.0) (335.0) (25.0) (65.0) (44.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (486.0) (607.0) (393.0)
12.99 12.99 3UR 0.98 1.77 100-3135 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (45.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
12.99 12.99 3UL 0.98 1.77 100-3136 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (45.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
12.99 12.99 3UR 0.98 2.36 100-3137 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (60.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
12.99 12.99 3UL 0.98 2.36 100-3138 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (60.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
12.99 12.99 3UR 0.98 1.97 100-3139 3.00 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 18.18 21.90 12.99
(330.0) (330.0) (25.0) (50.0) (76.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (462.0) (556.5) (330.0)
12.99 12.99 3UL 0.98 1.97 100-3140 3.00 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 18.18 21.90 12.99
(330.0) (330.0) (25.0) (50.0) (76.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (462.0) (556.5) (330.0)
12.99 12.79 3ER 0.98 2.17 8E-4532 1.66 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.95 22.40 14.96
(330.0) (325.0) (25.0) (55.0) (42.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (456.0) (569.0) (380.0)
12.99 12.79 3EL 0.98 2.17 8E-4538 1.66 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.95 22.40 14.96
(330.0) (325.0) (25.0) (55.0) (42.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (456.0) (569.0) (380.0)
12.99 12.16 3GL 0.98 1.97 8E-4196 1.75 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 17.55 23.03 16.06
(330.0) (309.0) (25.0) (50.0) (44.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (446.0) (585.0) (408.0)
BULLDOZER END BIT DIMENSIONS — inch (mm) continued
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
12.99 12.16 3GR 0.98 1.97 8E-4197 1.73 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 17.55 23.03 16.06
(330.0) (309.0) (25.0) (50.0) (44.0) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (446.0) (585.0) (408.0)
12.99 12.99 3FR 0.98 1.12 4T-6391 3.25 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 17.40 19.94 12.99
(330.0) (330.0) (25.0) (28.5) (82.5) (82.5) (176.3) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (442.2) (506.7) (330.0)
12.99 12.99 3FL 0.98 1.12 4T-6392 3.25 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 17.40 19.94 12.99
(330.0) (330.0) (25.0) (28.5) (82.5) (82.5) (176.3) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (442.2) (506.7) (330.0)
12.99 12.48 3HR 0.98 1.57 3G-8283 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (40.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.48 3HL 0.98 1.57 3G-8284 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (40.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.48 3HR 0.98 1.38 3G-8291 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (35.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.48 3HL 0.98 1.38 3G-8292 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (35.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.18 3IR 0.98 1.25 4T-8723 2.75 3.25 3.68 4.00 4.00 2.44 3.25 3.25 3.25 17.25 20.81 13.75
(330.0) (309.6) (25.0) (32.0) (70.1) (82.6) (93.7) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (438.2) (528.6) (349.5)
12.99 12.18 3IL 0.98 1.25 4T-8724 2.75 3.25 3.68 4.00 4.00 2.44 3.25 3.25 3.25 17.25 20.81 13.75
(330.0) (309.6) (25.0) (32.0) (70.1) (82.6) (93.7) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (438.2) (528.6) (349.5)
12.99 12.99 2FR 0.98 1.38 135-9698 3.20 3.25 2.02 4.99 5.99 2.89 5.99 5.99 17.18 21.99 12.99
(330.0) (330.0) (25.0) (35.0) (81.5) (82.6) (51.4) (127.0) (152.4) (73.5) (152.4) (152.4) (436.4) (558.8) (330.0)
12.99 12.99 2FL 0.98 1.38 135-9699 3.20 3.25 2.02 4.99 5.99 2.89 5.99 5.99 17.18 21.99 12.99
(330.0) (330.0) (25.0) (35.0) (81.5) (82.6) (51.4) (127.0) (152.4) (73.5) (152.4) (152.4) (436.4) (558.8) (330.0)
11.00 10.62 3UL 0.875 1.38 105-0574 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (35.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
11.00 10.62 3UR 0.875 1.38 105-0575 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (35.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
11.00 10.62 3UL 0.875 1.77 105-0576 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (45.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
11.00 10.62 3UR 0.875 1.77 105-0577 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (45.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
11.00 10.79 3GL 0.875 1.38 9W-6198 1.63 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.93 23.62 14.01
(280.0) (274.0) (22.0) (35.0) (41.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (430.0) (600.0) (356.0)
11.00 10.79 3GR 0.875 1.38 9W-6199 1.63 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.93 23.62 14.01
(280.0) (274.0) (22.0) (35.0) (41.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (430.0) (600.0) (356.0)
10.00 10.00 3FR 0.875 0.98 4T-6505 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (254.0)
10.00 10.00 3FL 0.875 0.98 4T-6506 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (254.0)
10.00 10.00 3FR 0.875 0.98 4T-6241 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.11 16.11 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (409.1) (409.1) (254.0)
10.00 10.00 3FL 0.875 0.98 4T-6242 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.11 16.11 10.00
4Q2010
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (409.1) (409.1) (254.0)
10.00 10.00 3HR 0.875 1.57 3G-8285 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
DIMENSIONS — BULLDOZER END BITS
2-61
Bulldozers / Compactors
BULLDOZER END BIT DIMENSIONS — inch (mm) continued
2-62
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
10.00 10.00 3HL 0.875 1.57 3G-8286 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
4Q2010
10.00 10.00 3HR 0.98 1.57 3G-8287 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.98 1.57 3G-8288 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HR 0.875 0.875 3G-8293 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (22.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.875 0.875 3G-8294 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (22.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
Bulldozers / Compactors
10.00 10.00 3HR 0.875 1.18 3G-8315 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.875 1.18 3G-8316 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
DIMENSIONS — BULLDOZER END BITS
10.00 10.00 3HR 0.98 1.18 3G-8317 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.98 1.18 3G-8318 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3FR 0.875 0.98 4T-6503 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.01 18.00 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.6) (457.2) (254.0)
10.00 0.875 3FL 0.98 1.75 4T-6504 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.01 18.00 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.6) (457.2) (254.0)
10.00 10.00 3FR 0.98 0.98 4T-6239 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 15.99 19.17 9.99
(254.0) (254.0) (25.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.4) (487.1) (254.0)
10.00 10.00 3FL 0.98 0.98 4T-6240 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 15.99 19.17 9.99
(254.0) (254.0) (25.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.4) (487.1) (254.0)
10.00 10.00 3FR 0.98 1.18 4T-8089 1.75 3.25 2.93 4.00 4.00 2.93 3.00 3.00 3.00 15.98 19.17 9.99
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (74.5) (101.6) (101.6) (74.5) (76.2) (76.2) (76.2) (406.0) (487.0) (254.0)
10.00 10.00 3FL 0.98 1.18 4T-8090 1.75 3.25 2.93 4.00 4.00 2.93 3.00 3.00 3.00 15.98 19.17 9.99
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (74.5) (101.6) (101.6) (74.5) (76.2) (76.2) (76.2) (406.0) (487.0) (254.0)
10.00 10.00 3FL 0.875 1.38 8E-9544 1.77 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.82 19.96 10.00
(254.0) (254.0) (22.0) (35.0) (45.1) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (402.0) (507.0) (254.0)
10.00 10.00 3FR 0.875 1.38 8E-9545 1.77 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.82 19.96 10.00
(254.0) (254.0) (22.0) (35.0) (45.1) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (402.0) (507.0) (254.0)
10.00 10.00 3IR 0.98 1.10 9J-1477 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.74 18.94 11.55
(254.0) (254.0) (25.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (400.0) (481.1) (293.6)
10.00 10.00 3IL 0.98 1.10 9J-1478 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.74 18.94 11.55
(254.0) (254.0) (25.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (400.0) (481.1) (293.6)
10.00 10.00 3IR 0.875 1.10 4J-8843 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.72 19.29 11.63
(254.0) (254.0) (22.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (399.5) (490.0) (295.5)
10.00 10.00 3IL 0.875 1.10 4J-8854 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.72 19.29 11.63
(254.0) (254.0) (22.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (399.5) (490.0) (295.5)
10.00 10.00 3HR 0.875 1.57 3G-8277 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
BULLDOZER END BIT DIMENSIONS — inch (mm) continued
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
10.00 10.00 3HL 0.875 1.57 3G-8278 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HR 0.98 1.57 3G-8279 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HL 0.98 1.57 3G-8280 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HR 0.98 1.18 3G-8301 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HL 0.98 1.18 3G-8302 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3FR 0.75 0.98 4T-6671 1.75 3.25 1.95 4.00 4.00 1.95 4.00 4.00 1.99 15.31 16.06 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (101.6) (101.6) (50.8) (388.9) (407.9) (254.0)
10.00 10.00 3FL 0.75 0.98 4T-6672 1.75 3.25 1.95 4.00 4.00 1.95 4.00 4.00 1.99 15.31 16.06 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (101.6) (101.6) (50.8) (388.9) (407.9) (254.0)
10.00 9.31 2GL 0.75 1.18 6Y-4410 1.30 2.50 2.24 3.19 3.19 2.24 3.94 3.66 15.04 20.10 12.15
(254.0) (236.5) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (382.0) (510.0) (308.5)
10.00 9.31 2GR 0.75 1.18 6Y-4411 1.30 2.50 2.24 3.19 3.19 2.24 3.94 3.66 15.04 20.10 12.15
(254.0) (236.5) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (382.0) (510.0) (308.5)
10.00 10.00 3HR 0.875 1.38 6Y-5375 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (35.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 10.00 3HL 0.875 1.38 6Y-5376 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (35.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 10.00 3HR 0.875 2.00 6Y-5377 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (50.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 10.00 3HL 0.875 2.00 6Y-5378 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (50.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 8.52 2ER 0.75 1.18 9W-1875 0.98 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.61 18.31 11.63
(254.0) (216.5) (19.0) (30.0) (25.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (295.5)
10.00 8.52 2EL 0.75 1.18 9W-1876 0.98 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.61 18.31 11.63
(254.0) (216.5) (19.0) (30.0) (25.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (295.5)
10.00 10.00 2FR 0.75 0.98 9W-8874 2.46 2.50 2.24 3.19 3.19 2.24 3.94 3.66 14.61 18.31 10.00
(254.0) (254.0) (19.0) (25.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (254.0)
10.00 10.00 2FL 0.75 0.98 9W-8875 2.46 2.50 2.24 3.19 3.19 2.24 3.94 3.66 14.61 18.31 10.00
(254.0) (254.0) (19.0) (25.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (254.0)
10.00 10.00 2UL 0.75 1.38 122-8617 2.46 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.60 18.30 10.62
(254.0) (254.0) (19.0) (35.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (270.0)
10.00 10.00 2UR 0.75 1.38 122-8618 2.46 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.60 18.30 10.62
(254.0) (254.0) (19.0) (35.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (270.0)
10.00 10.00 3H 0.75 1.00 3J-2465 1.75 3.25 1.94 4.00 4.00 1.94 3.00 3.00 3.00 14.50 17.50 11.60
(254.0) (254.0) (19.0) (25.4) (44.5) (82.6) (49.3) (101.6) (101.6) (49.3) (76.2) (76.2) (76.2) (368.3) (444.5) (294.6)
10.00 10.00 3H 0.75 1.00 3J-2466 1.75 3.25 1.94 4.00 4.00 1.94 3.00 3.00 3.00 14.50 17.50 11.60
(254.0) (254.0) (19.0) (25.4) (44.5) (82.6) (49.3) (101.6) (101.6) (49.3) (76.2) (76.2) (76.2) (368.3) (444.5) (294.6)
4Q2010
10.00 10.00 3FR 0.75 0.98 4T-6667 1.75 3.25 1.95 4.00 4.00 1.95 3.00 3.00 3.00 14.50 16.50 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (76.2) (76.2) (76.2) (368.3) (419.1) (254.0)
DIMENSIONS — BULLDOZER END BITS
2-63
Bulldozers / Compactors
BULLDOZER END BIT DIMENSIONS — inch (mm) continued
2-64
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
10.00 10.00 3FL 0.75 0.98 4T-6668 1.75 3.25 1.95 4.00 4.00 1.95 3.00 3.00 3.00 14.50 16.50 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (76.2) (76.2) (76.2) (368.3) (419.1) (254.0)
4Q2010
10.00 10.00 3FR 0.875 1.57 7J-2975 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.39 15.30 10.00
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (340.0) (388.6) (254.0)
10.00 10.00 3FL 0.875 1.57 7J-2976 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.39 15.30 10.00
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (340.0) (388.6) (254.0)
10.00 10.00 3FR 0.875 0.98 4T-6669 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.38 15.31 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (339.9) (388.9) (254.0)
10.00 10.00 3FL 0.875 0.98 4T-6670 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.38 15.31 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (339.9) (388.9) (254.0)
Bulldozers / Compactors
8.00 7.87 1ER 0.75 0.98 4T-5407 3.74 3.85 3.00 3.00 3.00 16.93 20.47 9.92
(203.2) (200.0) (19.0) (25.0) (95.0) (98.0) (76.2) (76.2) (76.2) (430.0) (520.0) (252.0)
8.00 7.87 1EL 0.75 0.98 4T-5408 3.74 3.85 3.00 3.00 3.00 16.93 20.47 9.92
(203.2) (200.0) (19.0) (25.0) (95.0) (98.0) (76.2) (76.2) (76.2) (430.0) (520.0) (252.0)
DIMENSIONS — BULLDOZER END BITS
8.00 8.00 1F 0.75 0.75 3G-4285 4.00 3.87 3.87 3.00 3.00 3.00 16.73 16.73 8.00
(203.2) (203.2) (19.0) (19.0) (101.6) (98.2) (98.2) (76.2) (76.2) (76.2) (425.0) (425.0) (203.2)
8.00 8.03 2HR 0.75 0.87 3G-8319 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.03 2HL 0.75 0.87 3G-8320 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.03 2HR 0.625 0.87 3G-8321 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (16.0) (22.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.03 2HL 0.625 0.87 3G-8322 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (16.0) (22.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.00 2FR 0.75 1.00 4T-4435 1.50 2.50 2.24 3.19 3.19 2.24 3.94 3.66 13.78 15.98 8.00
(203.2) (203.2) (19.0) (25.4) (38.1) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (350.0) (406.0) (203.2)
8.00 8.00 2FL 0.75 1.00 4T-4436 1.50 2.50 2.24 3.19 3.19 2.24 3.94 3.66 13.78 15.98 8.00
(203.2) (203.2) (19.0) (25.4) (38.1) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (350.0) (406.0) (203.2)
8.00 8.00 2FL 0.75 0.75 4T-3045 1.50 2.50 2.24 4.00 4.00 2.24 4.00 4.00 13.75 14.85 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (57.0) (101.6) (101.6) (57.0) (101.6) (101.6) (349.2) (377.2) (203.2)
8.00 8.00 2FL 0.75 0.75 4T-3046 1.50 2.50 2.24 4.00 4.00 2.24 4.00 4.00 13.75 14.85 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (57.0) (101.6) (101.6) (57.0) (101.6) (101.6) (349.2) (377.2) (203.2)
8.00 8.00 2IR 0.75 0.87 5J-1419 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.62 14.72 9.50
(203.2) (203.2) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (345.9) (373.9) (241.3)
8.00 8.00 2IL 0.75 0.87 5J-1420 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.62 14.72 9.50
(203.2) (203.2) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (345.9) (373.9) (241.3)
8.00 7.55 2ER 0.75 1.18 4T-4454 1.30 2.50 2.24 3.18 3.18 2.24 3.94 3.66 13.58 16.93 10.63
(203.2) (192.0) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (345.0) (430.0) (270.0)
8.00 7.55 2EL 0.75 1.18 4T-4455 1.30 2.50 2.24 3.18 3.18 2.24 3.94 3.66 13.58 16.93 10.63
(203.2) (192.0) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (345.0) (430.0) (270.0)
8.00 7.99 2HR 0.625 0.87 3G-8295 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.82 8.70
(203.2) (203.0) (16.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
8.00 7.99 2HL 0.625 0.87 3G-8296 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.82 8.70
(203.2) (203.0) (16.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
BULLDOZER END BIT DIMENSIONS — inch (mm) continued
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
8.00 7.99 2HR 0.75 0.87 3G-8297 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.83 8.70
(203.2) (203.0) (19.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
8.00 7.99 2HL 0.75 0.87 3G-8298 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.83 8.70
(203.2) (203.0) (19.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
8.00 8.00 2FR 0.75 0.75 4T-3041 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.06 14.89 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (331.7) (378.2) (203.2)
8.00 8.00 2FL 0.75 0.75 4T-3042 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.06 14.89 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (331.7) (378.2) (203.2)
8.00 8.00 2FR 0.625 0.75 4T-3049 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.00 14.50 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (330.2) (368.2) (203.2)
8.00 8.00 2FL 0.625 0.75 4T-3050 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.00 14.50 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (330.2) (368.2) (203.2)
8.00 8.00 2F 0.625 0.625 5R-5007 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 12.94 13.56 8.00
(203.2) (203.2) (16.0) (16.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (328.7) (344.4) (203.2)
8.00 8.00 2F 0.625 0.625 5R-5008 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 12.94 13.56 8.00
(203.2) (203.2) (16.0) (16.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (328.7) (344.4) (203.2)
8.00 8.00 2FR 0.625 0.75 4T-3051 1.50 2.50 1.93 4.00 4.00 1.93 4.00 4.00 12.92 13.55 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (101.6) (101.6) (49.0) (101.6) (101.6) (328.2) (344.2) (203.2)
8.00 8.00 2FL 0.625 0.75 4T-3052 1.50 2.50 1.93 4.00 4.00 1.93 4.00 4.00 12.92 13.55 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (101.6) (101.6) (49.0) (101.6) (101.6) (328.2) (344.2) (203.2)
8.00 7.99 2IR 0.625 0.75 9F-7075 1.50 2.50 1.94 3.50 3.50 1.94 4.00 4.00 12.25 15.00 9.25
(203.2) (203.0) (16.0) (19.0) (38.0) (63.5) (49.3) (88.9) (88.9) (49.3) (101.6) (101.6) (311.1) (381.0) (235.0)
8.00 7.99 2IL 0.625 0.75 9F-7076 1.50 2.50 1.94 3.50 3.50 1.94 4.00 4.00 12.25 15.00 9.25
(203.2) (203.0) (16.0) (19.0) (38.0) (63.5) (49.3) (88.9) (88.9) (49.3) (101.6) (101.6) (311.1) (381.0) (235.0)
8.00 8.00 1FR 0.625 0.75 4T-3043 3.97 1.95 2.50 2.50 10.00 11.40 8.00
(203.2) (203.2) (16.0) (19.0) (100.8) (49.5) (63.5) (63.5) (254.0) (289.5) (203.2)
8.00 8.00 1FL 0.625 0.75 4T-3044 3.97 1.95 2.50 2.50 10.00 11.40 8.00
(203.2) (203.2) (16.0) (19.0) (100.8) (49.5) (63.5) (63.5) (254.0) (289.5) (203.2)
8.00 8.00 1HR 0.625 0.87 5A-4565 4.00 1.93 2.50 2.50 9.05 11.85 8.79
(203.2) (203.2) (16.0) (22.0) (101.6) (49.0) (63.5) (63.5) (230.0) (301.0) (223.5)
8.00 8.00 1HL 0.625 0.87 5A-4566 4.00 1.93 2.50 2.50 9.05 11.85 8.79
(203.2) (203.2) (16.0) (22.0) (101.6) (49.0) (63.5) (63.5) (230.0) (301.0) (223.5)
7.99 8.03 1HL 0.75 0.875 140-6788 3.99 3.86 3.00 3.00 3.00 17.32 20.35 9.60
(203.0) (204.0) (19.0) (22.0) (101.5) (98.2) (76.2) (76.2) (76.2) (440.0) (517.0) (244.0)
7.99 8.03 1HR 0.75 0.875 140-6787 3.99 3.86 3.00 3.00 3.00 17.32 20.35 9.60
(203.0) (204.0) (19.0) (22.0) (101.5) (98.2) (76.2) (76.2) (76.2) (440.0) (517.0) (244.0)
6.50 6.50 1F 0.625 0.625 4T-6229 3.25 3.99 2.50 2.50 12.99 12.99 6.49
(165.0) (165.0) (16.0) (16.0) (82.5) (101.5) (63.5) (63.5) (330.0) (330.0) (165.0)
6.50 6.50 1FL 0.625 0.625 6Y-5840 3.25 3.99 2.49 2.49 2.44 12.20 14.05 6.49
(165.0) (165.0) (16.0) (16.0) (82.5) (101.5) (63.5) (63.5) (62.0) (310.0) (357.0) (165.0)
6.50 6.50 1FR 0.625 0.625 6Y-5839 3.25 3.99 2.49 2.49 2.44 12.20 14.05 6.49
(165.0) (165.0) (16.0) (16.0) (82.5) (101.5) (63.5) (63.5) (62.0) (310.0) (357.0) (165.0)
4Q2010
DIMENSIONS — BULLDOZER END BITS
2-65
Bulldozers / Compactors
Bulldozers / Compactors
DIMENSIONS — BULLDOZER WEAR PLATES
2-66 4Q2010
Bulldozers / Compactors
DIMENSIONS — BULLDOZER WEAR PLATES
4Q2010 2-67
Bulldozers / Compactors
DIMENSIONS — BULLDOZER WEAR PLATES
2-68 4Q2010
Bulldozers / Compactors
DIMENSIONS — BULLDOZER WEAR PLATES
4Q2010 2-69
Bulldozers / Compactors
DIMENSIONS — BULLDOZER WEAR PLATES
3-2 4Q2010
Excavators
4Q2010 3-3
Excavators
1 7
3
5 6
1. Hinge. Optimized reinforced construction for high strength and performance matched to the machine’s power.
Pin-on or dedicated hinges are available.
2. Hinge Plates. Pass through torque tube for better load distribution and durability.
3. Sidebar. Pre-drilled to add sidebar protection.
4. Side Plate.
5. Side Wear Plates. High strength for extra protection.
6. Base Edge. Straight or “spade”, depending on application.
7. Gussets. For maximum rigidity.
8. Adjuster Group. Allows for easy correction of “slack” without removing the bucket pin.
9. Teeth (Tips). Cast from steel with properties that maintain hardness for long wear life in tough digging
applications.
10. Side Protection and Penetration.
11. 2-Strap Adapters.
3-4 4Q2010
Excavators
3
14
12
10 5
13
11
9
13. Horizontal Bottom Wear Plates. Protects wrapper area and reinforces bucket for greater strength and rigidity.
Easily replaced.
14. Lift Eye. Large loop and thin eye for easy shackling.
T1 Equivalent, high-strength, quenched and tempered steel: 90,000+ psi yield strength.
400Brinnel, high-strength, abrasion-resistant steel: 135,000 psi yield strength. 30% more wear resistant than T1.
Bucket shaded to differentiate material types. Actual buckets are Cat yellow.
4Q2010 3-5
Excavators
3-6 4Q2010
Excavators
Power (P)
Power Buckets are for use in abrasive applications where
breakout force and cycle times are critical — and for use in
materials such as tightly compacted mixed dirt and rock. (Not
recommended for clay.) Breakout force is maximized due to
decreased tip radius and increased pin spread. Machine cycle
times in most material is improved over a standard bucket in a
similar application.
Heavy Duty Power Buckets are available for 320-345 excavators.
4Q2010 3-7
Excavators
Rock (R)
Balderson offers a line of rock buckets that are designed to work
in the same applications as the Cat heavy duty rock buckets. These
complimentary offerings will provide a broad offering of rock
buckets. They will accept sidebar protectors or sidecutters.
3-8 4Q2010
Excavators
4Q2010 3-9
Excavators
Excavation (X)
General purpose wide bucket for excavation. The excavation
bucket has a shorter tip radius than a comparable capacity trench-
ing bucket providing increased curl force. Suitable for the same
types of material as the trenching bucket.
Utility (UT)
Light duty excavation, finishing, or cleanup bucket for a variety of
utility applications. Larger capacity buckets for lighter density mate-
rials. Bolt holes are provided for bolt-on teeth or bolt-on cutting edge.
3-10 4Q2010
Excavators
4Q2010 3-11
Excavators
3-12 4Q2010
Excavators
4Q2010 3-13
Excavators
R3.6B
“R” = attach stick to a Length of stick
in Meters
“B” indicates
Reach Boom Bucket Linkage
(Bucket Family)
“M” = attach stick to a
Mass Excavation
Boom
NO. 194219
S/N MACHINE
CAPACITY m3 yd3
WEIGHT kg lb
WIDTH mm in
3-14 4Q2010
Excavators
BUCKET LINKAGE
325D, 329D
330D, 336D
307C, 308C
Name Stick Pin Link Pin Face Spread Pin Spread Retention
324D
345D
374D
390D
365C
385C
Dia (mm) Dia (mm) (mm) (mm) Type
Source: 1. Page 3-10 of the 7th Edition of the GET Parts Sales Kit
2. Machine Sales Price List
3. Rastar Images
Width
4Q2010 3-15
300 SERIES EXCAVATOR — BASIC LINKAGE & GET DATA
3-16
Front Rear MX Pin Q/C Conversion Front Pin
Bucket Std. GET Edge Thk (Stick Pin) (Pwr Link) Pin Spread Spread Face Spread Linkage Length Front Pin Rear Pin Adjuster
Family Size (mm) (mm) (mm) (mm) (mm) (mm) Group (in) (Stick) (Power) Group
307/308 J225 22 45 45 306.0 — 186 — 14.0 106-6734 106-6734 102-3143
4Q2010
311/312 J250 32 65 65 407.3 — 221 — 16.1 086-0523 086-0523 4I-6914
Excavators
Face
Spread
Excavators
Bucket Interchangeability
Models listed on the same line will interchange buckets.
*While a bucket may fit different machines, there are other factors to consider before interchanging; e.g. machine performance
differences, stability and application differences.
4Q2010 3-17
Excavators
320C-320 (B-Family), 325 (B-Family), 322C-322 (B-Family), M320C-M320*, 318C-318, M318C-M318*, E240B-E240,
E200B-E200, MS240-08, MS230-3, MS210-8
320C-320 (with long reach), A-Family, 325C-325 (with long reach), 322C-322 (with long reach), 314C, 313C-313B,
312C-312, 311C-311, E240B-E240 (with long reach), E200B-E200 (with long reach), E120B-E120, E110B, MS120-8
318C-318, B-Family, 325 (B-Family), 322C-322 (B-Family), 320C-320 (B-Family), M320C-M320*, M318C-M318*,
E240B-E240, E200B-E200, MS240-8, MS230-3, MS210-8
315C-315, 317, M315, M312
312C-312, A-Family, 325C-325 (with long reach), 322C-322 (with long reach), 320C-320 (with long reach), 314C,
313C-313B, 311C-311, E240B-E240 (with long reach), E200B-E200 (with long reach), E120B-E120, E110B, MS120-8
307C-307, 308C, E70B-E70
304.5, 305
303.5, BH30W, BH30
302.5
301.5, 301.6, 301.8
M320C-M320, B-Family*, 325 (B-Family), 322C-322 (B-Family), 320C-320 (B-Family), 318B-318, M318C-M318,
E240B-E240, E200B-E200, MS240-8, MS230-3, MS210-8
M315C-M315, M312C-M312
245D-245
245 Mass Ex
235D-235
235 Mass Ex
231D, D-Family, 330C-330 (D-Family), 325C-325 (D-Family), 322C-322B (D-Family)
229D, 225D
229, 225B-225
224B-224
219D, 215D
219C-219, 215C-215
214B, 213B
214, 213, 212, 211, 206, 205
E300B-E300, MS300-8, MS280-2
E240B-E240, B-Family, 325 (B-Family), 322C-322 (B-Family), 320C-320 (B-Family), M320C-M320*, 318C-318,
M318C-M318*, E200B-E200, MS240-8, MS230-3, MS210-8
E240B-E240 (with long reach), A-Family, 325C-325 (with long reach), 322C-322 (with long reach), 320C-320 (with long
reach), 314C, 313C-313B, 312C-312, 311C-311, E200B-E200 (with long reach), E120B-E120, E110B, MS120-8
E180, MS180
E140
E120B-E120, A-Family, 325C-325 (with long reach), 322C-322 (with long reach), 320C-320 (with long reach), 314C,
313C-313B, 312C-312, 311C-311, E240B-E240 (with long reach), E200B-E200 (with long reach), E110B, MS120-8
E110, MS120-2, MS090-8
E70B-E70, 308C, 307C-307
MS300-8, MS280-2, E300B-E300
MS240-8, MS230-2, MS210-8, B-Family, 325 (B-Family), 322C-322 (B-Family), 320C-320 (B-Family), M320C-M320*,
318C-318, M318C-M318*, E240B-E240, E200B-E200
MS120-2, MS090-8, E110
MS070-2
3-18 4Q2010
Excavators
300 SERIES
4Q2010 3-19
Excavators
300 SERIES
3-20 4Q2010
Excavators
300 SERIES
4Q2010 3-21
Excavators
300 SERIES
3-22 4Q2010
Excavators
300 SERIES
4Q2010 3-23
Excavators
300 SERIES
3-24 4Q2010
Excavators
300 SERIES
4Q2010 3-25
Excavators
300 SERIES
3-26 4Q2010
Excavators
300 SERIES
4Q2010 3-27
Excavators
300 SERIES
3-28 4Q2010
Excavators
300 SERIES
4Q2010 3-29
Excavators
300 SERIES
3-30 4Q2010
Excavators
300 SERIES
4Q2010 3-31
Excavators
300 SERIES
3-32 4Q2010
Excavators
300 SERIES
4Q2010 3-33
Excavators
300 SERIES
3-34 4Q2010
Excavators
300 SERIES
4Q2010 3-35
Excavators
300 SERIES
3-36 4Q2010
Excavators
300 SERIES
4Q2010 3-37
Excavators
300 SERIES
3-38 4Q2010
Excavators
300 SERIES
4Q2010 3-39
Excavators
300 SERIES
3-40 4Q2010
Excavators
300 SERIES
4Q2010 3-41
Excavators
300 SERIES
3-42 4Q2010
Excavators
300 SERIES
4Q2010 3-43
Excavators
300 SERIES
3-44 4Q2010
Excavators
300 SERIES
4Q2010 3-45
Excavators
300 SERIES
3-46 4Q2010
Excavators
300 SERIES
4Q2010 3-47
Excavators
300 SERIES
3-48 4Q2010
Excavators
300 SERIES
A FAMILY BUCKETS
Bucket Group* 7Y-6402 112-7064 112-7064 229-7564 125-0513
Bucket Assembly 7Y-6660 7Y-6660 229-7565 121-1807
Width — inches 32" 32" 36" 36" 45" 45"
mm 815 815 914 914 1145 1145
Bucket Type GP Longreach, GP GP DC DC –
Backhoe Longreach
Base Edge Assembly 7Y-6664 102-7620 7Y-6664 229-7568
Base Edge N/S N/S N/S N/S 7Y-6601 a 7Y-6601 a
Bottom Wear Strip
Front — Flat 7Y-6665 102-7636
Rear — Shaped 7Y-6666 102-7637
7Y-6667
7Y-6668
Number of Teeth 5 5 5
Center Adapters (5) 119-3253 (5) 119-3253 (5) 7Y-0254 (5) 8E-9490
Tip Size** J250 J250 J250 J300
Bucket Type: GP — General Purpose DC — Ditch Cleaning
* Bucket group includes slack adjuster group.
** Additional tip options found in tip option chart on page 3-178.
a Base edge only — no adapters.
N/S = Non-Serviced
A FAMILY BUCKETS — Continued
Bucket Group* 170-9046
Width — inches 48"
mm 1219
Bucket Type DC
Base Edge Assembly 127-557
Bucket Type: DC — Ditch Cleaning
* Bucket group includes slack adjuster group.
B FAMILY BUCKETS*
Bucket Group** 100-6223 239-7646 269-2585 129-5046 142-2540 231-5175
Bucket Assembly 100-6224 250-5812 269-2591 129-4867 142-2547 231-5181
Width — inches 24" 24" 24" 24" 24" 24"
mm 610 610 610 610 610 610
Bucket Type ET GP GP HD HD HD
Base Edge Assembly 104-2096 240-9602 279-4080 104-2096 104-2096 227-8740
Base Edge 100-6481 240-9596 279-4053 100-6481 100-6481 221-0805
Bottom Wear Strip
Front — Flat (3) 100-6478 (1) 209-5740 127-8624 127-8624 (1) 231-5996
Rear — Shaped (2) 100-6479 (5) 209-5741 (3) 128-0700 (3) 128-0700 (4) 241-6317
Front — Shaped
Side (2) 213-4536 N/S
Number of Teeth 3 3 3 3 3 3
Center Adapters 6I-6354 (1) 220-9084 220-9084 6I-6354 6I-6354 (1) 220-9094
Corner Adapters (R/L) 6I-6355/6 220-9085/6 232-2085/6 6I-6355/6 6I-6355/6 220-9095/6
Tip Size*** J350 K80 K80 J350 J350 K90
Bucket Type: ET — Extreme Trenching GP — General Purpose HD — Heavy Duty
* B Family Buckets require “B” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
N/S = Non-Serviced
4Q2010 3-49
Excavators
300 SERIES
3-50 4Q2010
Excavators
300 SERIES
4Q2010 3-51
Excavators
300 SERIES
3-52 4Q2010
Excavators
300 SERIES
4Q2010 3-53
Excavators
300 SERIES
3-54 4Q2010
Excavators
300 SERIES
4Q2010 3-55
Excavators
300 SERIES
3-56 4Q2010
Excavators
300 SERIES
4Q2010 3-57
Excavators
300 SERIES
3-58 4Q2010
Excavators
300 SERIES
4Q2010 3-59
Excavators
300 SERIES
3-60 4Q2010
Excavators
300 SERIES
4Q2010 3-61
Excavators
300 SERIES
3-62 4Q2010
Excavators
300 SERIES
4Q2010 3-63
Excavators
300 SERIES
3-64 4Q2010
Excavators
300 SERIES
4Q2010 3-65
Excavators
300 SERIES
C FAMILY BUCKETS*
Bucket Group** 129-9621 120-7007 132-5051 233-0559 100-4189
Bucket Assembly 135-5425 233-0550 153-0333 100-4190
Width — inches 28" 30" 30" 30" 30" 30"
mm 710 762 762 762 762 762
Bucket Type R R GP GP GP† HD
Base Edge Assembly 190-725 a 190-597 a 105-2761 228-6951 105-2761 105-2761
Bottom Wear Strip
Front — Flat 133-2243 (1) 198-8737 133-2243 (4) 127-5711
Rear — Shaped (2) 7Y-7694 (3) 100-4346 (5) 199-6291 (3) 100-4346 (2) 127-5710
Side (2) 133-2242 (2) 220-1337 (2) 133-2242
Number of Teeth 3 3 3 4 3 3
Center Adapters 6I-6404 6I-6404 6I-6404 (2) 220-9094 6I-6404 6I-6404
Corner Adapters (R/L) 6I-6405/6 6I-6405/6 6I-6405/6 220-9095/6 6I-6405/6 6I-6405/6
Tip Size*** J400 J400 J400 K90 J400 J400
Bucket Type: R — Rock GP — General Purpose HD — Heavy Duty
* C Family Buckets require “C” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
a Balderson Part # 1-800-255-2372.
† Dedicated Coupler.
3-66 4Q2010
Excavators
300 SERIES
4Q2010 3-67
Excavators
300 SERIES
3-68 4Q2010
Excavators
300 SERIES
4Q2010 3-69
Excavators
300 SERIES
3-70 4Q2010
Excavators
300 SERIES
4Q2010 3-71
Excavators
300 SERIES
3-72 4Q2010
Excavators
300 SERIES
4Q2010 3-73
Excavators
300 SERIES
3-74 4Q2010
Excavators
300 SERIES
CB FAMILY BUCKETS*
Bucket Group** 269-2629 281-2057 270-8857 269-2641 298-0160 269-2630
Bucket Assembly 269-2635 281-2069 270-8858 269-2649 269-2636
Width — inches 24" 24" 24" 24" 24" 30"
mm 610 610 600 610 610 762
Bucket Type GP GPW X HD HDR GP
Base Edge Assembly 279-4090 276-5890 253-9205 279-4100 279-4100 279-4091
Base Edge 276-5857 276-5864 253-9206 276-5870 276-5870 276-5858
Bottom Wear Strip
Front — Flat 276-5792 253-9211
Number of Teeth 3 3 3 3 3 4
Center Adapters 220-9094 220-9094 220-9094 220-9104 220-9104 (2) 220-9094
Corner Adapters (R/L) 232-2095/6 223-8095/6 220-9095/6 232-2105/6 220-9105/6 232-9095/6
Tip Size*** K90 K90 K90 K100 K100 K90
Tip (3) 217-4890
Bucket Type: GP — General Purpose GPW — General Purpose Wide Tip X — Excavating HD — Heavy Duty HDR — Heavy Duty Rock
* CB Family Buckets require “CB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
4Q2010 3-75
Excavators
300 SERIES
3-76 4Q2010
Excavators
300 SERIES
4Q2010 3-77
Excavators
300 SERIES
3-78 4Q2010
Excavators
300 SERIES
4Q2010 3-79
Excavators
300 SERIES
3-80 4Q2010
Excavators
300 SERIES
4Q2010 3-81
Excavators
300 SERIES
D FAMILY BUCKETS*
Bucket Group** 210-6007 100-4191 129-9619 132-5043 221-3377 239-7587
Bucket Assembly 100-4192 135-5875 198-0949 239-7593
Width — inches 26" 30" 30" 30" 30" 30"
mm 660 762 762 762 762 762
Bucket Type HD† ET R GP GP GP
Base Edge Assembly 210-6117 105-2532 191-628 a 105-2532 105-2532 241-6725
Bottom Wear Strip
Front — Flat 210-6125 (3) 100-4356 118-8713 (1) 197-8289 (1) 204-9686
Rear — Shaped (5) 210-6126 (2) 100-4355 (4) 118-8714 (5) 197-8293 (6) 223-5840
Number of Teeth 3 3 3 3 3 3
Center Adapters 159-0464 159-0464 159-0464
Corner Adapters (R/L) 159-0465/6 159-0465/6 159-0465/6 159-0465/6 159-0465/6 220-9105/6
Tip Size*** J460 J460 J460 J460 J460 K100
Bucket Type: HD — Heavy Duty ET — Extreme Service Trenching R — Rock GP — General Purpose
* D Family Buckets require “D” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
a Balderson Part # 1-800-255-2372.
† Dedicated Coupler.
3-82 4Q2010
Excavators
300 SERIES
4Q2010 3-83
Excavators
300 SERIES
3-84 4Q2010
Excavators
300 SERIES
4Q2010 3-85
Excavators
300 SERIES
3-86 4Q2010
Excavators
300 SERIES
4Q2010 3-87
Excavators
300 SERIES
3-88 4Q2010
Excavators
300 SERIES
DB FAMILY BUCKETS*
Bucket Group** 269-2671 342-2187 292-0404 269-2683 342-2201 298-0177
Bucket Assembly 267-2677 342-2194 292-4020 269-2691 342-2208
Width — inches 30" 30" 30" 30" 30" 30"
mm 762 780 750 762 760 762
Bucket Type GP GDC EX HD HD PG-HD
Base Edge Assembly 279-4101 292-4035 279-4110 279-4110
Base Edge 276-5871 292-4036 279-4035 279-4035
Bottom Wear Strip
Front — Flat 292-4022
Number of Teeth 3 3 3 3
Center Adapters 220-9104 220-9104 309-1114 309-1114 309-1114 309-1114
Corner Adapters (R/L) 232-2105/6 220-9105/6 309-1117/8 309-1115/6 309-1115/6 309-1115/6
Tip Size*** K100 K100 K110 K100 K110 K110
Bucket Type: GP — General Purpose GDC — General Duty – Capacity EX — Extreme Service Excavating HD — Heavy Duty
PG-HD — Pin Grabber Heavy Duty
* DB Family Buckets require “DB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
4Q2010 3-89
Excavators
300 SERIES
3-90 4Q2010
Excavators
300 SERIES
4Q2010 3-91
Excavators
300 SERIES
3-92 4Q2010
Excavators
300 SERIES
4Q2010 3-93
Excavators
300 SERIES
3-94 4Q2010
Excavators
300 SERIES
4Q2010 3-95
Excavators
300 SERIES
3-96 4Q2010
Excavators
300 SERIES
4Q2010 3-97
Excavators
300 SERIES
3-98 4Q2010
Excavators
300 SERIES
4Q2010 3-99
Excavators
300 SERIES
E FAMILY BUCKETS*
Bucket Group** 6I-5037 6I-5035 124-3036 6I-5038 142-0885 262-3812
Bucket Assembly 7Y-9147 7Y-9141 4I-4100 7Y-9148 136-6252 251-6856
Width — inches 59" 63" 63" 64" 66" 66"
mm 1500 1600 1600 1625 1676 1676
Bucket Type EX X X EMX HD HD
Base Edge Assembly 6I-5246 6I-5240 109-8486 6I-5247 137-4110 241-6723
Bottom Wear Strip
Front — Flat 128-9213 128-9211 (3) 4I-4112 (2) 4I-7136 (1) 136-6294 (1) 256-3030
Rear — Shaped 4I-7128 (3) 4I-4113 (2) 4I-7135 (4) 128-5378 (5) 256-3052
Number of Teeth 4 5 6 4 6 7
Center Adapters (2) 6I-6554 (3) 159-0464 (4) 159-0464 (2) 6I-6554 (4) 159-0464 (5) 232-0114
Corner Adapters (R/L) 6I-6555/6 159-0465/6 159-0465/6 6I-6555/6 159-0465/6 232-0115/6
Tip Size*** J550 J460 J460 J550 J460 K110
Bucket Type: EX — Extreme Service Excavating X — Excavating EMX — Extreme Service Mass Excavation HD — Heavy Duty
* E Family Buckets require “E” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
F FAMILY BUCKETS*
Bucket Group** 162-2914 163-6030 268-9029 286-1913 105-3596 145-8066
Bucket Assembly*** 148-7035 163-6034 268-9038 286-1914 105-3597 145-8072
Width — inches 30" 30" 30" 30" 36" 36"
mm 762 762 762 762 914 914
Bucket Type GP HDR HDR HDR ET GP
Base Edge Assembly 148-7038 N/S 241-6717 279-9956 105-3611 137-4105
Base Edge 150-5519 244-3888 279-9947 105-3612 137-4098
Bottom Wear Strip
Front — Flat (1) 150-5520 (1) 163-6040 (1) 256-3026 283-8599 (2) 105-3609 145-8085
Rear — Shaped (4) 154-7210 (5) 147-6642 (5) 256-3032 (3) 105-3610 (4) 145-8086
(2) 163-6042 (2) 256-3041
Number of Teeth 3 3 3 3 3 3
Center Adapters 159-0464 159-0464 (1) 232-0114 309-1114 6I-6554 159-0464
Corner Adapters (R/L) 159-0465/6 159-0465/6 232-0115/6 309-1115/6 6I-6555/6 159-0465/6
Tip Size# J460 J460 K110 K110 J550 J460
Bucket Type: GP — General Purpose HDR — Heavy Duty Rock ET — Extreme Service Trenching HD — Heavy Duty
* F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 3-178.
N/S = Non-Serviced
3-100 4Q2010
Excavators
300 SERIES
F FAMILY BUCKETS*
Bucket Group** 136-6240 268-9027 286-1901 199-7658 159-0891 106-8854
Bucket Assembly*** 136-6247 268-9036 286-1907 199-7661 159-0892 109-1127
Width — inches 36" 36" 36" 36" 36" 38"
mm 914 914 914 914 914 965
Bucket Type HD HD HD HDP HDR RR
Base Edge Assembly 137-4105 244-3895 279-9957 199-7665 159-0897 105-9716 a
Base Edge 137-4098 199-7667 279-9948 199-7667 137-4098 105-9717
Bottom Wear Strip
Front — Flat 136-6269 (1) 256-3027 277-3967 (1) 199-7671 (1) 159-0893
Rear — Shaped (4) 128-2949 (5) 256-3049 277-3968 (6) 199-7672 (5) 158-0896 (3) 105-3610
(2) 159-0894
Number of Teeth 3 4 4 3 4 5
Center Adapters 159-0464 (2) 232-0114 309-1114 6I-6554 (2) 159-0464 107-8554
Intermediate Adapters (2) 107-8555
Corner Adapters (R/L) 159-0465/6 232-0115/6 309-1115/6 195-5095/6 159-0465/6 (2) 107-8556
Tip Size# J460 K110 K110 J550 J460 J550
Bucket Type: HD — Heavy Duty HDP — Heavy Duty Power HDR — Heavy Duty Rock RR — Rock Ripping
* F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 3-178.
a The Base Edge Assembly includes 107-8554 and (2) 107-8555. (2) 107-8556 must be ordered separately if replacing Base Edge Assembly.
4Q2010 3-101
Excavators
300 SERIES
Number of Teeth 5 4 5 5 5 5
Center Adapters (3) 159-0464 (2) 6I-6554 (3) 159-0464 (3) 6I-6404 (3) 159-0464 (3) 232-0114
Corner Adapters (R/L) 159-0465/6 6I-6555/6 159-0465/6 6I-6405/6 159-0465/6 232-0115/6
Tip Size# J460 J550 J460 J400 J460 K110
Bucket Type: T — Trenching ET — Extreme Trenching GP — General Purpose HD — Heavy Duty
* F Family Buckets require “F” Family Bucket linkage. Use 255-5013 Adapter Kit to allow F-linkage buckets to be used on 345C machines.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 3-178.
3-102 4Q2010
Excavators
300 SERIES
4Q2010 3-103
Excavators
300 SERIES
3-104 4Q2010
Excavators
300 SERIES
4Q2010 3-105
Excavators
300 SERIES
G FAMILY BUCKETS*
Bucket Group** 138-4714 6I-5071 6I-5050 6I-5050 138-4687 143-5412
Bucket Assembly*** 138-4716 105-6215 4I-4071 113-2112 138-4715 143-5413
Width — inches 67" 74" 75" 75" 75" 75"
mm 1700 1880 1905 1905 1905 1905
Bucket Type HD VX MX MX HD HDR
Base Edge Assembly 138-4728 109-8492 109-8490 109-8490 138-2395 138-2395
Bottom Wear Strip
Front — Flat 138-4726 (2) 105-6219 (3) 4I-4090 (3) 4I-4090 138-2392 143-5421
Rear — Shaped (4) 138-4727 (2) 105-6218 (3) 4I-4091 (3) 4I-4091 (4) 138-2393 (5) 143-5422
(3) 143-5423
Number of Teeth 6 6 5 5 6 6
Center Adapters (4) 6I-6554 (3) 105-6269 (3) 6I-6554 (3) 6I-6554 (4) 6I-6554 (4) 6I-6554
Corner Adapters (R/L) 6I-6555/6 (3) 105-6270 6I-6555/6 6I-6555/6 6I-6555/6 6I-6465/6
Tip Size# J550 J550 J550 J550 J550 J550
Bucket Type: HD — Heavy Duty VX — V Type Excavation MX — Mass Excavation HDR — Heavy Duty Rock
* G Family Buckets require “G” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 3-178.
H FAMILY BUCKETS*
Bucket Group** 100-6194 104-2111 137-6257 100-6192 100-5642 100-5712
Bucket Assembly 100-6195 100-8177 137-6257 100-6193 100-5643 100-5713
Width — inches 42" 43" 47" 48" 54" 60"
mm 1067 1090 1195 1219 1372 1524
Bucket Type ET RR RR ET T T
Base Edge Assembly 100-6197 105-2501 142-4315 a 100-6196 107-9890 100-5714
Bottom Wear Strip
Front — Flat (3) 105-2439 (3) 7Y-7857 (3) 100-5717
Rear — Shaped 110-1572 (3) 145-2561 (3) 145-2561 (3) 7Y-7858 (3) 100-5718
Number of Teeth 3 5 5 3 4 4
Center Adapters 6I-6604 107-8604 107-8604 6I-6604 (2) 6I-6554 (2) 6I-6554
Intermediate Adapters (2) 107-8605 (2) 107-8605
Corner Adapters (R/L) 6I-6605/6 (2) 107-8606 (2) 107-8606 6I-6605/6 6I-6555/6 6I-6555/6
Tip Size*** J600 J600 J600 J600 J550 J550
Bucket Type: ET — Extreme Service Trenching RR — Rock Ripping T — Trenching
* H Family Buckets require “H” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
a The Base Edge Assembly includes 107-8604 and (2) 107-8605. (2) 107-8606 must be ordered separately if replacing Base Edge Assembly.
3-106 4Q2010
Excavators
300 SERIES
HB FAMILY BUCKETS*
Bucket Group** 203-6975 283-8507 283-8511 203-6973 266-6513 228-4468
Bucket Assembly 203-6976 283-8520 283-8524 203-6974 266-6566 228-4470
Width — inches 42" 42" 42" 42" 45" 47"
mm 1067 1067 1067 1067 1150 1194
Bucket Type GP GP HDR HDR X HD-RR
Base Edge Assembly 206-9133 293-6380 293-6380 206-9133 270-8239 142-4315
Base Edge 206-9130 293-6384 293-6384 206-9130 270-8242 142-4316
Bottom Wear Strip
Front — Flat 206-9136 206-9136 266-6573
Rear — Shaped (5) 206-9140 (4) 209-5686 266-6570
(3) 209-5687
Number of Teeth 3 3 3 3 3
Center Adapters (1) 6I-6604 195-9154 195-9154 (1) 6I-6604 195-9154 (2) 107-8605
Middle Adapters (1) 107-8604
Corner Adapters (R/L) 159-0605/6 264-2155/6 264-2155/6 159-0605/6 195-9155/6 (2) 107-8606
Tip Size*** J600 K150 K150 J600 K150 J600
Bucket Type: GP — General Purpose HDR — Heavy Duty Rock X — Excavating HD-RR — Heavy Duty Rock Ripping
* HB Family Buckets require “HB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
4Q2010 3-107
Excavators
300 SERIES
3-108 4Q2010
Excavators
300 SERIES
4Q2010 3-109
Excavators
300 SERIES
J FAMILY BUCKETS*
Bucket Group** 100-7839 100-7842 135-3706 143-9132 104-1988 104-1990
Bucket Assembly 100-7840 100-7843 135-3707 143-9127 104-6840 104-6845
Width — inches 60" 66" 69" 69" 80" 81"
mm 1524 1676 1755 1755 2030 2055
Bucket Type T T MX Reach MX Reach X VX
Base Edge Assembly 101-9908 101-9919 135-3715 135-3715 107-9839
Bottom Wear Strip
Front — Flat 135-3713 135-3713 (3) 5I-8941 7I-6802
Rear — Shaped (3) 135-3714 (3) 135-3714 (3) 5I-8942 (3) 7I-6801
Number of Teeth 4 4 5 5 5 6
Center Adapters (2) 6I-6604 (2) 6I-6604 (3) 113-9604 (3) 113-9604 (3) 6I-6604
Corner Adapters (R/L) 6I-6605/6 6I-6605/6 113-9605/6 113-9605/6 6I-6605 (3) 6I-8605/6
Tip Size*** J600 J600 J600 J600 J600 J600
Bucket Type: T — Trenching MX — Mass Excavation X — Excavating VX — V Type Excavation
* J Family Buckets require “J” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
3-110 4Q2010
Excavators
300 SERIES
JB FAMILY BUCKETS*
Bucket Group** 233-9691 265-7671 266-6515 260-1092 260-1096 260-1093
Bucket Assembly 233-9706 270-3713 270-3712 260-1117 260-1121 260-1118
Width — inches 47" 63" 75" 75" 79" 79"
mm 1194 1600 1900 1900 2000 2000
Bucket Type HD-RR EX HDR-S R-S HDR-S R-S
Base Edge Assembly 142-4315 270-3715 260-1266 260-1260 260-1264 315-5319
Base Edge 142-4316 270-3716 260-1293 260-1287 260-1291 315-5320
Bottom Wear Strip
Front — Flat 270-8224 253-3143 253-2279 253-3144 251-0941
Rear — Shaped 270-8223 253-3139 253-2278 253-3140 251-0917
Edge Segments 116-7460 109-9080
116-7461 109-9081
116-7462 109-9082
Number of Teeth 5 3 4 4 4 4
Center Adapters (2) 107-8605 232-2170 232-2170 232-2170 232-2170 232-2170
(1) 107-8604
Corner Adapters (R/L) (2) 107-8606 232-2171/2 232-2171/2 232-2171/2 232-2171/2 232-2171/2
Tip Size*** J600 K170 K170 K170 K170 K170
Bucket Type: HD-RR — Heavy Duty Rock Ripping EX — Extreme Service Excavating HDR-S — Heavy Duty Rock – Spade R-S — Rock Spade
* JB Family Buckets require “JB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
4Q2010 3-111
Excavators
300 SERIES
3-112 4Q2010
Excavators
300 SERIES
4Q2010 3-113
Excavators
300 SERIES
3-114 4Q2010
Excavators
300 SERIES
S FAMILY BUCKETS*
Bucket Group** 132-5065 232-4530 129-5702 161-3331 239-7701 129-9623
Bucket Assembly*** 135-8620 232-4524 129-5703 161-3333 239-7508
Width — inches 24" 24" 24" 24" 24" 28"
mm 610 610 610 610 610 710
Bucket Type GP GP HD HD HD R
Base Edge Assembly 104-2096 227-8740 104-2096 104-2096 241-6724 190-725 a
Bottom Wear Strip
Front — Flat (1) 209-5740 127-8624 127-8624 (1) 241-6316
Rear — Shaped (3) 100-6479 (5) 209-5741 (3) 128-0700 (3) 128-0700 (4) 241-6317
Side (2) 220-1337 N/S
Number of Teeth 3 3 3 3 3 3
Center Adapters 6I-6354 (1) 220-9094 6I-6354 6I-6354 (1) 220-9104 6I-6404
Corner Adapters (R/L) 6I-6355/6 220-9095/6 6I-6355/6 6I-6355/6 220-9105/6 6I-6405/6
Tip Size# J350 K90 J350 J350 K100 J400
Bucket Type: GP — General Purpose HD — Heavy Duty R — Rock
* S Family Buckets require “S” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 3-178.
a Balderson Part # 1-800-255-2372.
N/S = Non-Serviced
4Q2010 3-115
Excavators
300 SERIES
3-116 4Q2010
Excavators
300 SERIES
4Q2010 3-117
Excavators
300 SERIES
3-118 4Q2010
Excavators
300 SERIES
4Q2010 3-119
Excavators
300 SERIES
3-120 4Q2010
Excavators
300 SERIES
TB FAMILY BUCKETS*
Bucket Group** 257-7357 307-2983 345-3184 251-6919 307-0612 298-0224
Bucket Assembly 257-7412 307-2984 345-3192 251-6927 307-0602 298-0299
Width — inches 30" 30" 30" 30" 30" 30"
mm 762 762 762 762 762 762
Bucket Type GP GP GDC HDR HDR HDR
Base Edge Assembly 241-6717 279-9956 279-9956 241-6717 279-9956 279-9956
Base Edge 244-3888 279-9947 279-9947 244-3888 279-9947 279-9947
Bottom Wear Strip
Front — Flat (1) 256-3026 (1) 256-3026 283-8599
Rear — Shaped (5) 258-8962 (5) 256-3032
(1) 256-7955 (2) 256-3041
Number of Teeth 3 3 3 3 3 3
Center Adapters (1) 232-0114 309-1114 309-1114 (1) 232-0114 309-1114 309-1114
Corner Adapters (R/L) 232-0115/6 309-1115/6 309-1115/6 232-0115/6 309-1115/6 309-1115/6
Tip Size*** K110 K110 K110 K110 K110 K110
Bucket Type: GP — General Purpose GDC — General Duty – Capacity HDR — Heavy Duty Rock
* TB Family Buckets require “TB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
4Q2010 3-121
Excavators
300 SERIES
3-122 4Q2010
Excavators
300 SERIES
4Q2010 3-123
Excavators
300 SERIES
3-124 4Q2010
Excavators
300 SERIES
4Q2010 3-125
Excavators
300 SERIES
3-126 4Q2010
Excavators
300 SERIES
4Q2010 3-127
Excavators
300 SERIES
3-128 4Q2010
Excavators
300 SERIES
4Q2010 3-129
Excavators
300 SERIES
3-130 4Q2010
Excavators
300 SERIES
4Q2010 3-131
Excavators
300 SERIES
3-132 4Q2010
Excavators
300 SERIES
4Q2010 3-133
Excavators
300 SERIES
3-134 4Q2010
Excavators
300 SERIES
UB FAMILY BUCKETS*
Bucket Group** 271-2678 271-0248 345-3277 345-3287 273-1141 273-1413
Bucket Assembly 256-2028 271-2199 345-3280 345-3292 273-1589 273-1589
Width — inches 57" 57" 58" 58" 59" 59"
mm 1450 1450 1475 1475 1500 1500
Bucket Type HDR-S R-S GD SD X X
Base Edge Assembly 256-9465 273-1409 362-5050 362-6143 274-8272 274-8272
Base Edge 273-1410 273-1410 362-5057 362-6145 274-8273 274-8273
Bottom Wear Strip
Front — Flat 256-9455 273-1547 362-5079 362-5079 274-8269 274-8269
362-5080 362-5080
Edge Segments 258-5164
268-2660
268-2661
Number of Teeth 4 4 4 4 4 4
Center Adapters 232-0130 232-0130 232-0130 232-0130 309-1114 309-1114
Corner Adapters (R/L) 232-0131/2 232-0131/2 232-0131/2 232-0131/2 309-1117/8 309-1117/8
Tip Size*** K130 K130 K130 K130 K110 K110
Bucket Type: HDR-S — Heavy Duty Rock – Spade R-S — Rock Spade GD — General Duty SD — Severe Duty X — Excavating
* UB Family Buckets require “UB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
4Q2010 3-135
Excavators
300 SERIES
3-136 4Q2010
Excavators
300 SERIES
4Q2010 3-137
Excavators
300 SERIES
V FAMILY BUCKETS
Bucket Group 175-4480 175-4482 175-4484 175-4486 175-4554 175-4488
Bucket Assembly 175-4479 175-4481 175-4483 175-4485 175-4553 175-4487
Width — inches 36" 36" 36" 48" 48" 48"
mm 914 914 914 1219 1219 1219
Bucket Type GP HD HDR GP HD HDR
Base Edge Assembly 175-4514 175-4514 175-4514 183-4098 183-4098 183-4098
Bottom Wear Strip
Front — Flat 175-4515 175-4515 175-4515 169-2845 169-2845 169-2845
Rear — Shaped (6) 175-4518 (7) 175-4519 (6) 175-4520 (6) 175-4526 (7) 169-2844 (6) 175-4527
(2) 175-4521 (2) 175-4528
Number of Teeth 3 3 3 4 4 4
Center Adapters 6I-6554 6I-6554 6I-6554 (2) 6I-6554 (2) 6I-6554 (2) 6I-6554
Corner Adapters (R/L) 6I-6555/6 6I-6555/6 6I-6555/6 6I-6555/6 6I-6555/6 6I-6555/6
Tip Size* J550 J550 J550 J550 J550 J550
Bucket Type: GP — General Purpose HD — Heavy Duty HDR — Heavy Duty Rock
* Additional tip options found in tip option chart on page 3-178.
3-138 4Q2010
Excavators
300 SERIES
4Q2010 3-139
Excavators
300 SERIES
VB FAMILY BUCKETS*
Bucket Group** 273-5868 273-5874 222-5252 222-5250 253-8136 273-5871
Bucket Assembly 273-5885 273-5891 222-5253 222-5251 255-7058 273-5888
Width — inches 39" 39" 40" 40" 47" 48"
mm 998 998 1016 1016 1190 1220
Bucket Type GP HDR GP HDR HD-RR HD
Base Edge Assembly 279-9971 279-9971 223-2375 223-2375 255-7052 279-9972
Base Edge 279-9965 279-9965 223-2376 223-2376 255-7045 279-9966
Bottom Wear Strip
Front — Flat (1) 223-3920 (1) 223-3920
Rear — Shaped (5) 227-9874 (6) 223-3923
(1) 224-0002 (3) 223-3922
Number of Teeth 3 3 3 3 5 4
Center Adapters 232-0130 232-0130 (1) 6I-6554 (1) 6I-6554 (2) 107-8555 (2) 232-0130
Middle Adapters (1) 107-8554
Corner Adapters (R/L) 264-2135/6 264-2135/6 6I-6556/5 6I-6556/5 (2) 107-8556 264-2135/6
Tip Size*** K130 K130 J550 J550 J550 K130
Bucket Type: GP — General Purpose HDR — Heavy Duty Rock HD-RR — Heavy Duty Rock Ripping HD — Heavy Duty
* VB Family Buckets require “VB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
3-140 4Q2010
Excavators
300 SERIES
4Q2010 3-141
Excavators
300 SERIES
3-142 4Q2010
Excavators
300 SERIES
W FAMILY BUCKETS
Bucket Assembly 173-5724 173-5727 173-5720
Width — inches 79" 79" 89"
mm 2007 2007 2261
Bucket Type Extreme Excavation Spade Rock Excavation
Base Edge Assembly 174-8631 174-8636 174-5099
Bottom Transverse Wear Strip (7) 174-8641 (7) 174-8644 (7) 174-5102
Bottom Longitudinal Wear Strip (2) 160-9089 (2) 167-9082 (2) 174-8638
Number of Teeth 4 4 5
Center Adapters (2) 6I-6604 (3) 6I-6604
Corner Adapters (R/L) 6I-6605/6 (2) 6I-8605/6 6I-6605/6
Tip Size* J600 J600 J600
* Additional tip options found in tip option chart on page 3-178.
WB FAMILY BUCKETS*
Bucket Group** 260-1066 260-1067 260-1063 260-1071 260-1068 260-1064
Bucket Assembly 260-1136 260-1137 260-1133 260-1142 260-1138 260-1134
Width — inches 67" 71" 75" 75" 75" 79"
mm 1700 1800 1900 1900 1900 2000
Bucket Type R-S R-S EX HDR R-S EX
Base Edge Assembly 260-1246 260-1247 260-1243 260-1251 260-1248 260-1244
Base Edge 260-1273 260-1274 260-1270 260-1278 260-1275 260-1271
Bottom Wear Strip
Front — Flat 255-8463 255-8464 256-1045 254-3511 255-8465 256-1046
Rear — Shaped 255-8459 255-8460 256-1038 254-3510 255-8461 256-1039
Edge Segments 116-7460
116-7461
116-7462
Number of Teeth 4 4 4 4 4 4
Center Adapters 195-9154 195-9154 195-9154 195-9154 195-9154 195-9154
Corner Adapters (R/L) 195-9155/6 195-9155/6 195-9155/6 195-9155/6 195-9155/6 195-9155/6
Tip Size*** K150 K150 K150 K150 K150 K150
Bucket Type: R-S — Rock Spade EX — Extreme Service Excavating HDR — Heavy Duty Rock
* WB Family Buckets require “WB” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 3-178.
4Q2010 3-143
Excavators
300 SERIES
3-144 4Q2010
Excavators
300 SERIES
4Q2010 3-145
Excavators
300 SERIES
3-146 4Q2010
Excavators
300 SERIES
4Q2010 3-147
Excavators
300 SERIES
3-148 4Q2010
Excavators
245
TRENCHING/EXCAVATING/ROCK BUCKETS
Standard Bucket and 8K-1556 a 8K-1557 a 8R-0320 b 8K-1558 a 8R-0769 b 5V-5075
Bearing Assembly 3V-9729 a 3V-9730 a 8R-1949 b 3V-9106 a
4V-8999 a 4V-9000 a 4V-9001 a
Width* — inches 36" 42" 42" 48" 48" 51"
mm 914 1067 1067 1219 1219 1295
Bucket Type T T T T X R
Base Edge Assembly 8R-0343 8R-0783 5V-5081
Base Edge 8R-0982 8R-0982 8R-0982
Corners (R/L) 8K-4407/9 8K-4407/9 8K-4407/9 8K-4407/9 8K-4407/9 7V-5700–R
5V-5090–L
Center Adapters 6I-6554 6I-6554 (2) 6I-6554 6I-6554 (2) 6I-6554 (4) 3G-9494
Corner Adapters (R/L) 6I-6555/6 6I-6555/6 6I-6555/6 6I-6555/6 6I-6555/6
Tip Size** J550 J550 J550 J550 J550 J550
Bucket Type: T — Trenching X — Excavating R — Rock
* Bucket width is measured across outside corners of new long tips.
** See tip options chart on page 3-178 for other tip part numbers.
a See Sidecutter chart on page 3-151 for use on buckets with vertical wear strips column.
b See Sidecutter chart on page 3-151 for use on buckets with horizontal wear strips column.
4Q2010 3-149
Excavators
245
3-150 4Q2010
Excavators
245
SIDEBAR PROTECTORS FOR “B” AND “C” LINKAGE HD AND HDR BUCKETS*
RH (2) 112-2489
LH (2) 112-2489
Pin (8) 112-2490
Nuts (8) 132-0999
Shear Block (2) 330-2174
* HD and HDR bucket sidebars can accept one or two sidebar protectors or a sidecuter in the lower position and a sidebar protector in the upper position.
4Q2010 3-151
Excavators
235
3-152 4Q2010
Excavators
235
4Q2010 3-153
Excavators
235
3-154 4Q2010
Excavators
E300
4Q2010 3-155
Excavators
231
3-156 4Q2010
Excavators
225, 229
Buckets shown below can also be used on MS230-1, MS230-2, MS230-3, and MS240-8 machines.
4Q2010 3-157
Excavators
225, 229
3-158 4Q2010
Excavators
225, 229
CLAMSHELL BUCKETS
Assembly Group 8K-1467 8K-1468 8K-1469 8K-1470
Width* — inches 24" 30" 36" 42"
mm 610 762 914 1067
Adapters A (2) 8J-7123 (3) 8J-7123 (3) 8J-7123 (4) 8J-7123
Adapters B (3) 8J-7123 (4) 8J-7123 (4) 8J-7123 (5) 8J-7123
Tip Size** J250 J250 J250 J250
* Includes edge and adapters.
** See tip options chart on page 3-178 for other part numbers.
4Q2010 3-159
Excavators
E240
Buckets shown below can also be used on MS230-1, MS230-2, MS230-3, and MS240-8 machines.
3-160 4Q2010
Excavators
224, J450/J460 UPDATE
J450/J460 UPDATE
Though similar in appearance, there is a major difference between the J450 and new
J460 families. The J460 size is not an increase in width from 4.50" to 4.60". The new
J460 parts provide improved retention capabilities by increasing the pin size from
19.05 mm to 23.81 mm in diameter and the adapter pin bore from 21 mm to 25 mm.
The retainer also increased in size. The tips for both the J450 and J460 adapters,
however, are the same. Customers and dealers should be aware that either the J450 or
J460 adapters could be on 988/235 buckets and any other buckets with upsized
J450/J460 adapters. Current production buckets are using J460 adapters exclusively.
The attached list identifies the J450 adapter part numbers along with the J460.
J460 J450
Adapter Number Number
4Q2010 3-161
Excavators
224
3-162 4Q2010
Excavators
224
4Q2010 3-163
Excavators
E200, EL200
3-164 4Q2010
Excavators
E200, EL200
SPECIALTY BUCKETS
Standard
Bucket
Bucket and
Width* Bucket Bearing **Tip** Retainer HD Retainer
inch mm Type Assembly Adapters Long Pin Assembly HD Pin Assembly
EJ 993-731 (2) 9W-1304 (2) 1U-3302 (2) 132-4766 (2) 149-5733
32 815 X (LR) 993-737 (4) 1U-3252 (4) 132-4762 (4) 149-5733
34 865 CS (2) 993-763 (6) 9J-4384 (6) 1U-3202 (6) 8E-6208 (6) 8E-6209
45 1145 DC (LR) 993-745 a
48 1219 CS (2) 993-784 (6) 9J-4384 (6) 1U-3202 (6) 8E-6208 (6) 8E-6209
75 1905 DC 994-275
79 2007 BF 993-728
81 2055 TZ 993-729 (2) 9W-1304 (2) 1U-3302 (2) 132-4766 (2) 149-5733
Bucket Type: EJ — Ejector X (LR) — Excavating for 51' long reach, front only. Does not accept sidecutters.
CS — Clamshell DC (LR) — Ditch cleaning for 51' long reach, front only. Does not accept sidecutters.
DC — Ditch Cleaning BF — Bank Forming
TZ — Trapezoid
* Measured across outside corners of new long tips.
** See tip options chart on page 3-178 for other tip part numbers.
a For 51' long reach, front only. Does not accept sidecutters.
4Q2010 3-165
Excavators
215, 219
3-166 4Q2010
Excavators
215, 219
CLAMSHELL BUCKETS
Bucket
Width Bucket Base Qty. of
inch mm Group Edge* Teeth
24 610 5C-3300 2
3
30 762 5C-3199 3
4
36 914 5C-3301 5C-0859 3
5C-0858 4
42 1067 5C-3302 5C-3319 4
5C-3320 5
* Does not include teeth — must be ordered separately.
4Q2010 3-167
Excavators
215, 219
TOOTH OPTIONS
Bucket Type T, X EX, Rock Clamshell
Adapters
Center 9W-1304 3G-8354 9J-4384*
Right End 3G-6305 3G-8355
Left End 3G-6306 3G-8356
Tip Options
Long 1U-3302 1U-3352 1U-3202
Short 1U-3301 1U-3351
Wide 107-3300 107-3350 109-9200
Abrasion 4T-2203
Penetration 9J-4309 9J-4359 1U-3209
Penetration Long Life 125-8309 119-9359
Sharp
Corner 9W-8308 9W-2358 9W-8208
Center 9W-8309 9W-2359 9W-8209
Twin 135-9308 135-9357 135-8208
Heavy Duty Long 9N-4302 9N-4352
Heavy Duty Long Life 125-8302 135-9352
Heavy Duty Abrasion 9N-4303 9N-4353
Pin 8E-6208
Retainer Assembly 8E-6359 8E-6209
Heavy Duty Pin 132-4766 114-0358
Heavy Duty Retainer Assembly 149-5733 114-0359
Bucket Type: T — Trenching X — Excavating EX — Extreme Service Excavating
* Bolt-On. Use one 4F-4042 bolt, one 8J-2928 bolt and two 8J-2933 nuts.
3-168 4Q2010
Excavators
E180
Buckets shown below can also be used on MS180, MS180-3, and MS180-8 machines.
4Q2010 3-169
Excavators
E180
3-170 4Q2010
Excavators
205, 206, 211, 212, 213, 214
4Q2010 3-171
Excavators
205, 206, 211, 212, 213, 214
3-172 4Q2010
Excavators
205, 206, 211, 212, 213, 214
4Q2010 3-173
Excavators
205, 206, 211, 212, 213, 214
3-174 4Q2010
Excavators
E70B, E110, E110B, E120, E120B, 311, 312
4Q2010 3-175
Excavators
Long Tip
• best choice for most jobs
• good strength
• good penetration For more wear strength, if
For more penetration:
• good wear material breakage is a problem:
Penetration Tip
Short Tip
• better penetration • more strength
• less wear material • less wear material
• self sharpening
3-176 4Q2010
Excavators
Sharp
Sharp:
• Use when penetration is the primary concern.
• Provides less wear material.
Long Sharp
Long Sharp:
• Use when penetration is the primary concern.
• Provides more wear material than standard sharp.
Twin Sharp
Twin Sharp:
• Use for enhanced fracture capability.
• Less penetration than sharp tip.
• More wear material than sharp tip.
Penetration Long Life
Penetration Long Life:
• A.R.M. increases wear life in moderate- to high-impact conditions
• Self-sharpening tip enhances penetration
Wide
Wide:
• Provides clean floor.
• Increases capacity with less spillage.
4Q2010 3-177
Excavators
The majority of the time, the second to last and the third to
last locations in the part number identify the “J” size.
Example: 9W-8551
J550
3-178 4Q2010
Excavators
Width Width
K Series™ Part @ Front Thickness Adapters K Series™ Part @ Front Thickness Adapters
Size Number in (mm) in (mm) Attached Size Number in (mm) in (mm) Attached
K80 232-0022 23.4 (595) 1.42 (36) 1 K130 253-0126 40.0 (1015) 2.76 (70) 1
253-0132 23.4 (595) 1.42 (36) 2 253-0127 47.7 (1212) 2.76 (70) 2
232-0023 29.4 (746) 1.42 (36) 2 253-0128 53.4 (1356) 2.76 (70) 3
232-0024 35.4 (900) 1.42 (36) 3 257-1752 60.4 (1535) 2.76 (70) 3
232-0025 41.4 (1052) 1.42 (36) 3 257-1753 74.6 (1895) 2.76 (70) 4
232-0026 47.4 (1204) 1.42 (36) 4 257-1755 77.0 (1957) 2.76 (70) 4
Adapters for corners: 220-9084(2) or 220-9085/6 Adapters for corners: 232-0130(2) or 232-0131/2
K90 232-0027 23.8 (606) 1.57 (40) 1 K150 264-2027 69.0 (1753) 3.15 (80) 3
232-0028 29.8 (756) 1.57 (40) 2 264-2035** 80.7 (2050) 3.15 (80) 2
232-0029 35.9 (913) 1.57 (40) 3 264-2031 82.2 (2087) 3.15 (80) 4
232-0030 41.9 (1064) 1.57 (40) 3 264-2043* 87.4 (2220) 3.15 (80) 4
238-3199 47.7 (1212) 1.57 (40) 3 264-2039* 88.6 (2250) 3.15 (80) 3
232-0031 47.7 (1212) 1.57 (40) 4 264-2033 95.0 (2413) 3.15 (80) 5
232-0032 53.3 (1354) 1.57 (40) 5 264-2029 95.7 (2430) 3.15 (80) 3
Adapters for corners: 220-9094(2) or 220-9095/6 264-2037* 95.7 (2430) 3.15 (80) 2
264-2041* 96.5 (2450) 3.15 (80) 3
K100 232-0033 29.6 (753) 1.75 (45) 1 264-2045* 99.0 (2515) 3.15 (80) 4
232-0034 36.4 (926) 1.75 (45) 2 ** denotes stepped spade edge
232-0039 41.9 (1064) 1.75 (45) 3 ** stepped spade accepts 988 segments (109-xxxx)
232-0035 47.7 (1212) 1.75 (45) 3 Adapters for corners: 195-9154(2) or 195-9155/6
232-0036 53.5 (1359) 1.75 (45) 4
232-0037 59.1 (1501) 1.75 (45) 5 K170# 264-2051* 92.9 (2360) 3.67 (90) 4
232-0038 65.3 (1658) 1.75 (45) 5 264-2047* 96.5 (2450) 3.67 (90) 3
Adapters for corners: 220-9104(2) or 220-9105/6 264-2049** 96.5 (2450) 3.67 (90) 3
*# K170 edges and adapters have 35° bevel angle
K110 253-0103 29.6 (751) 2.36 (60) 1 ** denotes stepped spade edge
253-0104 35.6 (903) 2.36 (60) 1 ** stepped spade accepts 988 segments (116-xxxx)
253-0105 41.3 (1050) 2.36 (60) 2 Adapters for corners: 232-2170(2) or 232-2171/2
253-0106 47.3 (1202) 2.36 (60) 3
257-1771* 47.9 (1216) 2.36 (60) 3
253-0108 53.3 (1355) 2.36 (60) 3
253-0107* 53.9 (1369) 2.36 (60) 3
253-0109 59.3 (1507) 2.36 (60) 4
253-0110* 60.1 (1527) 2.36 (60) 4
253-0111 62.2 (1580) 2.36 (60) 4
253-0112 65.3 (1659) 2.36 (60) 3
253-0113 65.3 (1659) 2.36 (60) 4
253-0114* 65.3 (1659) 2.36 (60) 4
253-0116* 67.0 (1701) 2.36 (60) 4
253-0115 67.1 (1704) 2.36 (60) 4
253-0117* 70.2 (1784) 2.36 (60) 5
* denotes 75 mm deeper base edge
Adapters for corners: 232-0114(2) or 232-0115/6
4Q2010 3-179
Excavators
K Series™ Tips
Cat K Series™ excavator bucket tips use a new vertical retention system that allows quick and easy tip changes.
Providing a new locking interface at every tip change to improve retention reliability. Lower profile improves
penetration and wear life.
Penetration Tip
• For harder-to-penetrate, moderate impact, lower abrasion.
• Very good penetration.
• Top rib, bottom cavity to stay sharp.
Spike Tip
• For maximum penetration, especially in cohesive material.
• Stays sharp for enhanced wear life.
• Top and bottom rib design.
Wide Tip
• For easy-to-penetrate trenching applications.
• Low impact.
• Smooth floor trenches.
3-180 4Q2010
Excavators
RETAINERS
K80 K90 K100 SSL K110 K130 K150 K170
Standard 220-9090 220-9090 220-9090 286-2110 220-9130 233-7150 232-0170
Heavy Duty/Slag 309-1119 232-2139 232-2159
ADAPTERS OR SHANKS
K80 K90 K100 SSL K110 K130 K150 K170
HEX CTR (edge thickness) 220-9084 220-9094 220-9104 309-1114 232-0130 195-9154 232-2170
HEX Corner RH (4 degree kick out) 220-9085 220-9095 220-9105 309-1117 232-0131 195-9155 232-2171
HEX Corner LH (4 degree kick out) 220-9086 220-9096 220-9106 309-1118 232-0132 195-9156 232-2172
HEX Corner RH (5 degree kick out)* 232-2085 232-2095 232-2105 309-1115 264-2135 264-2155 264-2175
HEX Corner LH (5 degree kick out)* 232-2086 232-2096 232-2106 309-1116 264-2156 264-2156 264-2176
HEX Corner RH (straight) 229-7085 223-8095 232-0105
HEX Corner LH (straight) 229-7086 223-8096 232-0106
* Indicates greater kick out angle for greater heal clearance in trenching applications.
3-182 4Q2010
Excavators
MAO PROGRAM
For further MAO information — on past product produced — see MAO IRMs — New IRM
each yearly quarter.
4Q2010 3-183
Excavators
Adapters
The following two types of adapters are used on Cat base edges. Note that most base edges have the
adapters welded in place when they are made at the factory (called edge assemblies). In many cases,
the edge assembly is complete with all adapters. Where indicated, only the center adapters are
welded on and the corner adapters must be ordered separately.
Bolt-On Adapters
Available on Cat 215 Clamshell bucket cutting edges in a two-
bolt single-strap design.
3-184 4Q2010
Excavators
4Q2010 3-185
Excavators
Features Benefits
✔ Replaceable wear surface. ✔ Lower bucket mainenance costs.
✔ Sharpened sidecutters. ✔ Provide better bucket penetration.
✔ Increase bucket width and heaped capacity. ✔ Bigger payloads.
Blade Type
Two styles of Blade Type Sidecutters are effective in average digging
conditions. Suitable for most soil conditions and provides a strong
wear-resistant cutting edge that helps protect the bucket sides.
Combination
For light to moderate digging conditions. The combination sidecutter
reduces cost by allowing for replacement of the worn extension blade
rather than replacing the more expensive base blade.
Tooth-Type
For tough digging conditions. It consists of replaceable tips pinned to side
mounted adapters. The adapter accepts all tips available for excavator
buckets.
Strike-Off
Protects bucket corners from wear. It affords better penetration and offers
an additional cutting edge surface due to the sharp half-arrow design. The
strike-off design provides protection for the sidecutter/bucket mating
surface allowing a used bucket to be fitted with any of the previously
discussed sidecutters.
Heavy Duty
For tough digging conditions. It has more wear mate-
rial and covers more of the sidebar for enhanced
sidebar and bucket side protection.
Sidebar Protector
For extreme digging conditions in high impact appli-
cations. Pin-on for easy replacement; reversible for
longer life. Two styles available: one- & two-piece
design. Dependent on bucket type.
3-186 4Q2010
Excavators
4Q2010 3-187
Excavators
3-188 4Q2010
Excavators
256-8690/1 (10) 1D-4637 (10) 2J-3507 (10) 3K-5234 F bucket groups and corresponding
assemblies:
134-5515 and higher
G bucket groups and corresponding
assemblies:
138-4687 and higher
TB family buckets
V family buckets
W family buckets
4Q2010 3-189
Excavators
PRODUCT DESCRIPTION
3-190 4Q2010
Excavators
Front Shovel
Use these base edge assemblies on front shovel buckets of larger
model machines. The spade design gives better penetration and
more wear material up front for extended service life.
trailing Backhoe
These base edges are serviced as an assembly (cutting edge
& adapters) for the larger model excavators and for other
excavators they are serviced as a base edge with no adapters
welded in place.
leading Most of these edges are shorter at the rear of the edge than at
the leading edge. When making bucket width measure-
ments, remember to measure both the trailing edge and
leading edge length.
Rock Bucket
These edges are serviced only as an assembly and have a
shorter length at the rear of the cutting edge than at the
leading edge. The major difference between rock and
backhoe base edges are that the rock edges are thicker.
Mass Excavation
These edges are designed similar to the backhoe and rock
edges. They are the longest edge assemblies that Caterpillar
offers.
Clamshell
Use these edges on clamshell buckets. They come as edge
assemblies (base edge and adapters) and base edges. These
edges are designed as a rectangle with the trailing and leading
edge being the same length. Also, some of the clamshell cutting
edges have bolt holes for bolt-on adapters. These are used on
smaller model machines.
4Q2010 3-191
Excavators
Outline
A) Select Appropriate GET System. (See “Excavator Bucket Conversion Options” chart, below).
B) Determine Bucket Width and Cutting Edge Thickness. (See “How to Take Measurements” and
“Recommended Base Edge Thickness by Excavator Weight”).
C) Select Base Edge, Attachments and installation procedures.
— Front Shovel Buckets —
— Backhoe Buckets —
— Rock Buckets —
— Mass Excavation Buckets —
— Clamshell Buckets —
D) Complete Ground Engaging Tools Conversion Report Form (PEEP4210).
Two-Strap Adapters
Weld-On
Tips
CLAMSHELL Clamshell
Bolt-On Adapters
Bolt-On
Tips
3-192 4Q2010
Excavators
Selection
Once you have measured the bucket width, OUTER SIDEBAR TO OUTER SIDEBAR, and determined
base edge thickness, turn to the following charts.
1. Select a base edge with length closest to, but not less than, the width of the bucket. The width of
the bucket must measure between the uncut length of the edge and its minimum cut length as
indicated on the chart.
2. The edge selected should be similar in thickness to the edge already in the bucket.
3. Choose the adapters and tips from columns below each selected base edge.
REMEMBER: Since all buckets are different, there is no “standard” way to convert buckets. Final
decisions on weldments, cutting, etc...must be made by the dealer.
NOTE: In many cases the minimum cut length for an edge is the same dimension as the regular
length for another edge.
4Q2010 3-193
Excavators
L1 L1
W W
L2 B B A
A
L2
TYPE 1 TYPE 2
3-194 4Q2010
Excavators
4Q2010 3-195
Excavators
3-196 4Q2010
Excavators
4Q2010 3-197
Excavators
3-198 4Q2010
Excavators
4Q2010 3-199
Excavators
3-200 4Q2010
Excavators
4Q2010 3-201
Excavators
3-202 4Q2010
Excavators
4Q2010 3-203
Excavators
4Q2010 3-205
Excavators
TYPE 1 TYPE 2
4Q2010 4-1
Mining — 5000 Series Shovels and OEM
5230/5230B FRONT SHOVEL
4-2 4Q2010
Mining — 5000 Series Shovels and OEM
5230/5230B MASS EXCAVATION
4Q2010 4-3
Mining — 5000 Series Shovels and OEM
5130B FRONT SHOVEL
4-4 4Q2010
Mining — 5000 Series Shovels and OEM
5130B MASS EXCAVATION
4Q2010 4-5
Mining — 5000 Series Shovels and OEM
5130B MASS EXCAVATION
4-6 4Q2010
Mining — 5000 Series Shovels and OEM
5130 FRONT SHOVEL
4Q2010 4-7
Mining — 5000 Series Shovels and OEM
5130 FRONT SHOVEL
4-8 4Q2010
Mining — 5000 Series Shovels and OEM
5130 MASS EXCAVATION
4Q2010 4-9
Mining — 5000 Series Shovels and OEM
5130 MASS EXCAVATION
4-10 4Q2010
Mining — 5000 Series Shovels and OEM
5130 MASS EXCAVATION
4Q2010 4-11
Mining — 5000 Series Shovels and OEM
5110B MASS EXCAVATION
4-12 4Q2010
Mining — 5000 Series Shovels and OEM
5110B MASS EXCAVATION
4Q2010 4-13
Mining — 5000 Series Shovels and OEM
5080 FRONT SHOVEL
4-14 4Q2010
Mining — 5000 Series Shovels and OEM
5080 FRONT SHOVEL
4Q2010 4-15
Mining — 5000 Series Shovels and OEM
5080 FRONT SHOVEL
4-16 4Q2010
Mining — 5000 Series Shovels and OEM
5230 FRONT SHOVEL ABRASION PACKAGES
4Q2010 4-17
Mining — 5000 Series Shovels and OEM
5230 FRONT SHOVEL ABRASION PACKAGES
4-18 4Q2010
Mining — 5000 Series Shovels and OEM
5230 MASS EXCAVATION ABRASION PACKAGES
4Q2010 4-19
Mining — 5000 Series Shovels and OEM
5130B FRONT SHOVEL ABRASION PACKAGES
4-20 4Q2010
Mining — 5000 Series Shovels and OEM
5130B MASS EXCAVATION ABRASION PACKAGES
4Q2010 4-21
Mining — 5000 Series Shovels and OEM
5130 FRONT SHOVEL ABRASION PACKAGES
4-22 4Q2010
Mining — 5000 Series Shovels and OEM
5130 MASS EXCAVATION ABRASION PACKAGES
4Q2010 4-23
Mining — 5000 Series Shovels and OEM
4-24 4Q2010
Mining — 5000 Series Shovels and OEM
High Density
• 1.9-2.5 t/lcm (3200-4200 lb/lcy)
• Dense shot rock, heavy ore
• High impact & abrasion
Rock
• 1.3-1.9 t/lcm (2200-3200 lb/lcy)
• Shot rock, ore, consolidated overburden
High Abrasion
• 1.3-1.9 t/lcm (2200-3200 lb/lcy)
• Rock bucket with increased protection
• Highly abrasive shot rock, ore, consolidated overburden
4Q2010 4-25
Mining — 5000 Series Shovels and OEM
Coal
• 0.8-1.3 t/lcm (1350-2200 lb/lcy)
• Coal, light rehandling
Custom
• In the event one of the available buckets does not meet mate-
rial, site, or system requirements, Caterpillar can provide cus-
tom buckets.
• Customizing can be done to fit volume, penetration, or wear
characteristic needs.
4-26 4Q2010
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
MINING SHOVELS
The Caterpillar Mining Edge Guard System (MEGS) of pin-on GET is a vital link in the performance of the
5000 series mining shovels; the 5230, 5130B and the 5130. Cat MEGS pin-on GET aids penetration for high work
output and fully protects the sides and edges of buckets, even between the bucket tips.
MEGS independently attached pin-on components can be quickly removed or replaced in the pit within minutes.
MEGS cuts maintenance downtime, saves money, and improves total machine production to help customers achieve
the optimal cost per ton (CPT).
MEGS comes in two configurations, front shovel (FS) and Mass Excavation (ME) and there are three main tip sys-
tems utilized depending on the size of the machine. The V1000 tip family uses both a two-piece tip system which
consists of a tip and coupler and a unique one piece penetration tip system. The penetration tip is unique in this size
class and provides substantial advantages over the traditional two-piece systems used on competitive machines.
The new V880 and V810 families use a conventional one-piece tip and adapter system with the tip held in place by
a solid pin and snap ring retainer. The older V780 and V680 tip families, which are being replaced with the V880
or V810, use the one-piece tip and adapter system with the tip held in place by a heavy-duty flex pin.
MEGS uses tips from the V-family, which are top-pinned. This is due to the market preference for this style of reten-
tion on these large GET components. All MEGS tips are made from DH-3 material to resist softening in high heat
applications. All other components are made from DH-2 material.
Edge assemblies, adapters, tips, couplers, edge protectors, and sidebar protectors are covered against breakage
throughout their useful life by the Caterpillar Ground Engaging Tool Warranty.
MEGS (V1000) Family
V1000 Assembly
The edge assembly consists of a base edge weld-on adapters and weld-on lugs.
One-Piece Tip
The one-piece penetration tip is the recommended tip option for the V1000 family. It provides superior performance
in terms of cost per hour, productivity, penetration, simplicity and ease of maintenance. With the one-piece penetration
tip, the coupler is not required and it’s important the correct pin and retainer are used.
4Q2010 4-27
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
The Coupler is the component between the adapter and tip, it can be used with multiple
sets of tips. For high abrasion low impact applications, an ARM coupler is also available.
Coupler Retention has been upgraded to a new style with a bottom installed pin. This
new style allows the retention to last the length of the coupler life without any mainte-
nance in all applications. It consists of a sleeve, a new retainer and a bottom installed
tapered pin. The sleeve is located in the top counterbore of the coupler to prevent the pin
from loading the retainer. The retainer assembly, which sits in the bottom counterbore, is
a one-way only design to permit the pin to lock in to the snap ring before it engages the
sleeve. The pin is tapered and can be quickly and easily installed from the bottom and
driven out from the top at replacement time.
Tips in the two-piece system are top-pinned to the coupler with the pin held in place by a
snap ring style retainer assembly. There are two DH-3 tips to choose from; general pur-
pose and general purpose with ARM. Refer to the cross-reference chart in the “Tips” sec-
tion for details.
Edge and sidebar protectors are independently attached for quick and easy installation and removal. The edge pro-
tectors are held on by a solid pin and snap ring retainer assembly. Sidebar protectors can be rotated for extended life
and are independently attached using a flex pin.
V880 Assembly
The edge assembly consists of a base edge with weld-on adapters. The top-pinned tips are easy to install and remove
for fast on-site replacement and the tip/adapter juncture is patented to prevent the installation of competitive tips.
There are two main DH-3 tips to choose from in the V880 and V810 families; the general purpose tip and the pen-
etration tip. A sharp tip is also available for the V880 system. Refer to the chart in the “Tips” section for details.
The tips are held in place with a solid pin and snap ring retainer assembly. The snap ring retainer assembly is placed
in a counterbore in the bottom of the tip. The tip is installed over the adapter and retainer, and the pin is easily
installed and removed from the top.
Edge protectors are independently attached for quick and easy installation and removal using a solid pin and snap
ring retainer assembly. Sidebar protectors can be rotated for extended life and are independently attached using a flex pin.
4-28 4Q2010
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
Tip Pin and Retainer Assembly for the V1000 consists of a grooved pin, snap ring retainer
assembly. All tips use the same retainer; however, a longer pin is required for the penetra-
tion tip. The spring assembly, previously used to hold the system tight, is no longer required.
Coupler Retention consists of the top located sleeve, bottom located one-way snap ring
retainer and assembly and a bottom-installed tapered pin.
Tip Pin and Retainer Assembly for the V880 and V810 are similar to the V1000 using a
grooved pin and snap ring. The retainer assembly is located in the bottom counterbore of
the tip.
4Q2010 4-29
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
Heavy Duty Flex-Pin is available for both the V780 and V680 families. The system con-
sists of a flex-pin and a retaining sleeve to distribute the load over a greater area.
Taper Lock Pin for the V780 Taper Lock system. The system consists of a two-piece pin
that screws together and can only be used with tips with a large diameter round pin hole.
Currently only a GP tip is available.
Adapters:
When possible, the corner adapter comes with a crest. The addition of the crest enables
the weld to be moved out of the corner to reduce the potential for a stress riser in the
corner weld. The crest also consists of two lugs on either side. These are used to engage
the sidebar and eliminate the need for the bottom pin.
Sidebar Protectors protect bucket corners and sides from wear in mod-
erate to high wear rate material applications and aid in penetrating
densely compacted material. These are held in place using flex-pins.
When used in conjunction with a crested corner adapter, the lugs on
either side of the crest hold the bottom of the sidebar protector in place
and only one pin is required in the top hole. When a crested corner is
not available, both the top and bottom pins are required. Sidebar pro-
tectors are reversible to maximize the use of available wear material and
minimize CPH. When replacing base edges and corner adapters, it is
important that they are positioned correctly, otherwise the top pin hole
will be out of alignment.
4-30 4Q2010
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
4Q2010 4-31
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
As shown, not all tip styles are available for each model. The following cross-reference chart helps quickly identify
the tip style available for each model and by machine configuration.
Wear Plates
Hardened, medium carbon steel plates are the primary form of abrasion resistance
on Cat 5130, 5130B and 5230 buckets. Wear plates are strategically placed in the
high-wear areas to protect the bucket without adding excess weight and metal
where it is not needed.
Cat ARM has been researched, tested and proven to be more durable and efficient
than competitive offerings. However, using ARM in high-impact applications can
result in some of the ARM chipping off. In extreme high-impact conditions, ARM
may not be the most cost effective option.
4-32 4Q2010
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
4Q2010 4-33
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
Penetration/GP/ Penetration/
High
Penetration Tips
GP ARM Tips* GP ARM Tips*
Standard Wear Pkg
ARM Wear Package ARM Wear Package
PENETRATION
Wear Plate
DURABILITY
Medium
PENETRATION
*The 5230 one-piece penetration tip is recommended for all applications, as it provides the best
penetration, tip life, and cost per hour. When there is a preference for a two-piece system, use the
General Purpose in high impact and the GP A.R.M. in low-impact/high-abrasion applications.
DURABILITY
Medium
PENETRATION
*Since good penetration will enhance machine performance in most applications, the penetration
tip should be used initially. If penetration is not a concern, then change to the General Purpose tip
with its increased wear material to lower cost per hour.
FS use V810 Family.
ME use V880 Family.
4-34 4Q2010
Mining — 5000 Series Shovels and OEM
MINING SHOVELS
4Q2010 4-35
Mining — 5000 Series Shovels and OEM
5000 SERIES INSTALLATION PROCEDURES
4-36 4Q2010
Mining — 5000 Series Shovels and OEM
5000 SERIES INSTALLATION PROCEDURES
Pin installation is relatively simple and easy; however, it’s important to be familiar with
the following procedures before installation. Failure to correctly install may result in pre-
mature failure and coupler loss.
1. Remove the protective tape from the adhesive band on the top of the sleeve. Install the
sleeve in the coupler’s top counterbore from the inside. When installed correctly, the
large portion of the sleeve sits in the counterbore and the thinner sleeve is located in the
pin hole. Ensure the sleeve is held in place by the tape.
The only purpose of the tape is to hold the sleeve in place during installation.
2. Place the “one way” retainer assembly in the bottom counterbore of the coupler. The steel
washer sits in the bottom of the counterbore and the tabs face up. “This Side Up” will be
displayed on the top of the tab ring.
4. Install the pin in the bottom coupler pin hole with the tapered end in first. Make sure the
pin is centered in the retainer assembly. Using light hammer blows with a 5 lb (2.3 kg)
hammer, drive the pin up through the retainer. It may take some effort to expand the
snap ring initially, however, once the retainer is on the full diameter of the pin, the pin
will drive in easily. A final gentle blow will enable the snap ring to drop into the pin
groove. Check to see if the snap ring is properly seated by tapping on the head of the pin.
When seated, a solid ping will be heard and the joint will feel solid.
4Q2010 4-37
Mining — 5000 Series Shovels and OEM
5000 SERIES INSTALLATION PROCEDURES
If the pin is hit with excessive force just before the snap ring is engaged in the pin groove,
the retainer and pin may be damaged. This will result in a premature failure. If this
occurs both the pin and retainer must be replaced.
NOTE: The pin, retainer assembly and sleeve are not reusable.
Removal
1. To remove the retention system or replace the coupler, use the 1U-7184 pin removal tool,
a 12-20 lb. (5.5-9.1 Kg) hammer and remove the pin from the top.
2. Place the pin removal tool (1U-7184) on the top of the pin as shown in the illustration.
It will take several hard blows with the hammer to shear the retainer and drive the pin
out. Once the retainer is sheared, the pin may drive out completely. Ensure the pin will
not contact anything on its way out and can be removed safely.
WARNING
Wear safety glasses with protective side shields. Personal injury may occur if proper safety
equipment is not worn.
4-38 4Q2010
Mining — 5000 Series Shovels and OEM
5000 SERIES INSTALLATION PROCEDURES
5. Line up the protector holes over the lug and retainer holes using a pry bar.
6. Insert the tapered end of the pin down through the top of the cover and into the retainer assembly. Drive the pin down
through the retainer with light hammer blows until the snap ring engages the pin groove. When this occurs, a dis-
tinct sound is heard and a high resistance is felt with further hammering.
7. Tap the pin up from the bottom to ensure the snap ring is seated in the pin groove.
4Q2010 4-39
Mining — 5000 Series Shovels and OEM
5000 SERIES INSTALLATION PROCEDURES
Removal
WARNING: Wear safety glasses with protective side shields. Personal injury may occur if proper safety equip-
ment is not worn.
1. Use the 1U-7184 Pin Removal Tool and a 1U-7245 Dead Blow Sledge to drive out the pins as shown below.
2. Heavy blows will be required to shear or unseat the retainer assemblies from the pin groove.
3. Do not reuse either the pins or retainer assemblies. Removal of these components eliminate their ability to function.
4-40 4Q2010
Mining — 5000 Series Shovels and OEM
5000 SERIES INSTALLATION PROCEDURES
Pin Removal
NOTICE
Do not reuse used pins. Used pins may come out during oper-
ation and cause the loss of bucket tips, edge covers or side-
bar protectors. This results in damage to the bucket.
Competitive Conversions:
The MEGS bucket edge assemblies and sidebars can be retrofitted on competitive FS and ME Buckets of simi-
lar sized hydraulic excavators and shovels. Measurement of the competitive bucket need to be taken from outside
sidebar to outside sidebar and compared to the Cat edge assembly length. If the Cat edge assembly length is similar
to the competitive bucket width, the Cat assembly can be used. If, however, the competitive bucket width is not sim-
ilar to the Cat edge assembly length, a custom edge assembly can be provided.
Orders will take up to 30 days to produce, plus shipping time. Information required is outside of sidebar to outside
of sidebar measurement, edge thickness, number of tips, spade dimension (forward and width). Modifications may
be required at the rear of the edge assembly and sidebar locations of the competitive buckets. Call 1-800-282-5384
for required information.
Special Instructions:
Retention
• See Special Instruction SEHS9733 for tip, edge protectors, and sidebar protector pin installation/removal
procedures. Use 1U-7184 pin removal tool.
• See Special Instruction SEHS9927 for installing the Heavy Duty Flex-Pin.
• See Special Instruction REHS0016 for installation and removal of V1000 tip and coupler heavy duty GET
pins and retainers.
Welding
• See Special Instruction SEHS9810 for welding adapters and lugs onto base edges and welding adapter noses
onto adapters.
• Remember, quality welding is critical in achieving optimal life from these components.
• Lug welding instructions are available as a service magazine article.
Always use a new pin when installing tips, edge protectors, or sidebar protectors.
Publications:
The following publications relate to mining shovel GET:
Built Tough for Mining PEDP0044
Best Tools in the Trade for All Your Aggregate PEHP3079
Adapter/Base Edge Welding Special Instructions SEHS9810
Pin Installation/Removal Special Instructions SEHS9733
Training Package—5130 GET—Basics & Sales Opportunities PEST4175
5130 Heavy Duty Flex Pin Assembly SEHS9927
Installation of V1000 Tip and Coupler Pins and Retainers REHS0016
5130 Hydraulic Shovel/Backhoe PEHP3079
5130 Machine Specification AEHQ3875
5130 Hydraulic Shovel/Backhoe Specalog AEHQ5043
5230 Specalog AEHQ5044
5230 Salesgram TEKQ6151
5130/5230 Mining Shovels—Selecting the Right Bucket and GET for Your Job AEKK0898
5130 & 5230 Buckets and GET Design Improvements & Product Offerings TEKQ5384
V1000 GET System Options PEHP7070
V880/V810 GET System Options PEHP7071
GET Inspection and Maintenance Guide PEXT8033
Procedure to Install Wear Protection on Base Edges and Adapters REHS0434
4-42 4Q2010
Mining — 5000 Series Shovels and OEM
OEM MINING
OVERVIEW
Caterpillar has introduced a new line of GET, called LM Series™. The Caterpillar LM Series™ GET, which signi-
fies Large Mining, is used on other original equipment manufacturers’ (OEM) shovels and draglines. Specifically,
depending on the size of nose base a shovel or dragline bucket may have, there may now be an opportunity to
retrofit the machine to Caterpillar GET.
Featured in LM Series™ GET is the hammerless retention technology called CapSure™. CapSure™ allows the
customer to use standard tooling for the installation and removal of LM Series™ tips, as well as the adapter if a
competitive retrofit option is used.
For additional information regarding applicable markets, machines, removal & installation and more, please refer-
ence the documents listed in the Additional Reference Information below.
4Q2010 4-43
Mining — 5000 Series Shovels and OEM
OEM MINING
4Q2010 5-1
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
5-2 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
4Q2010 5-3
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
5-4 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
4Q2010 5-5
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
5-6 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
4Q2010 5-7
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
HAMMER NOMENCLATURE
HAMMER NOMENCLATURE
1st Generation:
“B” represents the original powercell with side plate and housings that were the same as Rammer only painted Cat
yellow, except for the B170 and B195 which are now painted black.
Models: B70, B90, B110, B115, B130, B140, B160, B170, B195
2nd Generation:
When the Cat style side plates and housings became available, the “B” was dropped and the model designation
became strictly numeric – representing the original powercell with the new side plate/housing design. This
generation also included all the warning plates and decals.
Models: 63, 70, 90, 100, 130, 140, 160, 180
3rd Generation:
The 115, 120, 130 and 180 currently in production have NEW powercells with the same CAT style housing. These
hammers were internally called 115C, 120C, 130C and 180C, but the C was not part of the hammer model shown
on the hammer when sold to the dealers.
Models: 115, 120, 130, 180
These hammers were the same as the previous hammers with the following new hammers 45, 50, 90C and 120C.
The small s is for the silenced version hammers.
Models: H45, H45 s, H50, H50 s, H63, H63 s, H70, H70 s, H90C, H90C s, H100, H100 s, H115 s, H120C s,
H130 s, H140 s, H160 s, H180 s, H195
5-8 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
HAMMER NOMENCLATURE
4Q2010 5-9
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
HAMMER SPECIFICATIONS
5-10 4Q2010
HAMMER MATCHING GUIDE
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.9J 9'6" E S
MASS 3.4J 11'2" EO S
4.1J 13'5" EO S
2.9J 9'6" E S
375 GP 3.4J 11'2" EO S
4.4H 14'5" S
5.5H 18'1" S
2.9J 9'6" EO S
REACH 4.4H 14'5" S
5.5H 18'1" S
2.4G 7'10" EO EO S
MASS 3.0G 9'10" EO EO S
350, 3.7F 12'2" S
345B 3.1F 10'2" EO EO S
REACH 3.6F 11'10" S
4.8F 15'9" S
2.2E 7'3" EO S G
MASS 2.6E 8'6" EO S G
3.5D 11'6" EO S G
330, 2.2E 7'3" EO S G
330B 2.8D 9'2" EO S G
REACH 3.3D 10'10" EO S G
3.9D 12'9" EO S G
4.8C 15'9" EO S
2.0D 6'7" E S G
MASS 2.5D 8'2" EO S G
325, 3.2C 10'6" EO S G
325B 2.0D 6'7" EO S G
REACH 2.7C 8'10" EO S G
3.2C 10'6" EO S G
4.2B 13'9" S G
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
4Q2010
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
5-11
HAMMER MATCHING GUIDE
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
5-12
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
4Q2010
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.0D 6'7" EO S G
MASS
2.5D 8'2" EO S G
322, 2.0D 6'7" EO S G
322B 2.5S 8'2" S G
REACH
2.95S 9'8" EO S
HAMMER MATCHING GUIDE
3.6B 11'10" S
1.9C 6'3" EO S G
MASS 2.4C 7'10" EO S G
2.9B 9'6" S G
320,
1.9C 6'3" EO S G
320B
2.5B 8'2" S G
REACH
2.9B 9'6" S G
3.9B 12'9" S G
1.9 6'3" E S G
2.5 8'2" S G
M320 REACH
2.9 9'6" S G
4.2 13'9" S
1.8 5'11" E S
MASS 2.4 7'10" E S
VA 2.8 9'2" S
4.0 13'2" S
M318
1.8 5'11" E S
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
2.4 7'10" E S
REACH
2.8 9'2" S
4.0 13'2" S
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
HAMMER MATCHING GUIDE
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
1.85 6'1" E S
2.25 7'5" E S
317 REACH
2.6 8'6" S
3.1 10'2" S
1.7 5'7" E S G G
2.1 6'11" S G G
MASS
2.4 7'10" S G G
VA
2.6 8'6" S G G
3.1 10'2" S G G
M315
1.7 5'7" E S G G
2.1 6'11" S G G
REACH 2.4 7'10" S G G
2.6 8'6" S G G
3.1 10'2" S G G
1.85 6'1" E S G G
2.25 7'5" S G G
315 REACH
2.6 8'6" S G G
3.1 10'2" S G G
1.6 5'3" E S S
2.0 6'6" S S
MASS
2.3 7'5" S S
VA
2.6 8'5" S S
3.0 9'9" S S
M312
1.6 5'3" E S S
2.0 6'6" S S
REACH 2.3 7'5" S S
2.6 8'5" S S
3.0 9'9" S S
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
4Q2010
5-13
HAMMER MATCHING GUIDE
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
5-14
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
4Q2010
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.1 6'11" E S S
312,
REACH 2.5 8'2" E S S
312B
3.0 9'10" S S
1.95 6'5" S G G
311,
REACH 2.25 7'5" S G G
HAMMER MATCHING GUIDE
311B
2.8 9'2" S G G
OFFSET 1.7 5'6" S G G
307,
1.7 5'6" S G G
307B REACH
2.2 7'3" S G G
302.5 S G
301.5 S
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
200 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.59 8'6" E S S
245D STD 3.20 10'6" E S S
4.42 14'6" E S S
2.44 8'0" S G G
235D STD 2.90 9'6" S G G
3.66 12'0" S G G
2.30 7'7" E S
231D STD 2.90 9'6" E S
3.50 11'6" E S
1.98 6'6" E S
229D,
STD 2.44 8'0" E S
225D
3.05 10'0" E S
1.80 5'11" E S
2.20 7'3" E S
219D STD 2.80 9'2" E S
3.40 11'2" E S
4.00 13'2" E S
1.80 5'11" E S
215D STD 2.20 7'3" E S
2.80 9'2" E S
1.80 5'11" E S S
214B, 2.30 7'7" E S S
STD
213B 2.80 9'2" E S S
4.00 13'2" E S S
1.60 5'3" S S G
212B, 2.30 7'7" S S G
STD
211B 2.80 9'2" S S G
4.00 13'2" S S G
1.60 5'3" E E S G G
206B,
STD 2.10 6'11" E E S G G
205B
2.60 8'6" E E S G G
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
4Q2010
G — General Duty - for loose or easy to break material (60% or more machine hours)
5-15
HAMMER MATCHING GUIDE
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
5-16 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — CAT SCRAP, DEMOLITION AND SORTING TOOLS
Parts Spec.
Manual Disassembly SOTA
Product S/N Abbreviated and Abbreviated Special Service
Name Prefix Parts Book OMM Assembly SOTA Instruction Manual STMGs
Demolition Shears
S225/S25 2RW SEBP3140 SEBU7380 RENR4423
S230/S30 8WS SEBP3140 SEBU7380 RENR4423
S240/S40 3BW SEBP3140 SEBU7380 RENR4423
S250/S50 3KW SEBP3140 SEBU7380 RENR4423
S280/S80 4FW SEBP3140 SEBU7380 RENR4423
S2130/S130 4TW SEBP3140 SEBU7380 RENR4423
Mechanical Scrap Shears
S115 ADY SEBP3166 SEBU7539 REHS1038
S128 AFF SEBP3166 SEBU7539 REHS1038
Concrete Pulverizers
P16 1ZW SEBP3161 GEBJ0067 RENR4419 GEBN0028
P25 2LW SEBP3161 GEBJ0067 RENR4419 GEBN0028
P28 2WW SEBP3161 GEBJ0067 RENR4419 GEBN0028
P40 3FW SEBP3161 GEBJ0067 RENR4419 GEBN0028
P60 3RW SEBP3161 GEBJ0067 RENR4419 GEBN0028
Mechanical Pulverizers
P115 ADM SEBP3164 SEBU7538 REHS1038
P120 AEK SEBP3164 SEBU7538 REHS1038
P130 AFP SEBP3164 SEBU7538 REHS1038
P140 AGX SEBP3164 SEBU7538 REHS1038
Concrete Crushers
CR20 4DW SEBP3160 GEBJ0066 RENR4418 GEBN0027
CR28 4JW SEBP3160 GEBJ0066 RENR4418 GEBN0027
CR35 5BW SEBP3160 GEBJ0066 RENR4418 GEBN0027
CR50 5ZW SEBP3160 GEBJ0066 RENR4418 GEBN0027
Mini-Shear/Mini-Crusher
S3 7HZ SEBP3141 GEBJ0068 RENR4448
CR3 6EZ SEBP3141 GEBJ0068 RENR4448
4Q2010 5-17
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — CAT SCRAP, DEMOLITION AND SORTING TOOLS
5-18 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Matching excavators for shears, pulverizers, crushers, grapples, mechanical tools and multi-processors are shown
as follows.
Shears
4Q2010 5-19
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Shears (continued)
Stick Mounted Shears
Long Undercarriage
Machine Boom Stick S280/S80 S250/S50 S240/S40 S230/S30 S225/S25
375 L GP 5.5 m 18'0" X
750 mm (2'6") shoes 4.4 m 14'5" X
3.4 m 11'2" X
2.9 m 9'6" X X
375 L Reach 5.5 m 18'0" X X
750 mm (2'6") shoes 4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
750 mm (2'6") shoes 3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X
750 mm (2'6") shoes 4.05 m 13'3" X
3.6 m 11'10" X
3.1 m 10'2" X X
345B L-F Reach 4.8 m 15'9" X
3.9 m 12'10" X
3.4 m 11'2" X
345B L-V Reach 3.9 m 12'10" X
3.4 m 11'2" X X
330B L Reach 3.9 m 12'10" X
750 mm (2'6") shoes 3.3 m 10'10" X X
325B L Reach 3.2 m 10'6" X
2.7 m 8'10" X
322B L Reach 3.6 m 11'10" X
2.95 m 9'8" X
2.5 m 8'2" X
320B L Reach 3.9 m 12'10"
2.9 m 9'6"
2.5 m 8'2"
1.9 m 6'3" X
5-20 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Shears (continued)
Matching Guide
Machine S305 S320 S325 S340 S365 S390
307C X
308C X
311C X
312C X
314C X
315C X
318C X X
319C X X
320C X X
321C X X
322C X X X
325C X X X
330C X X X X
345B X X
345B II X
365B X X
365B II X
385B X X X
M313C X X
M315C X X
M316C X X
M318C X
M322C X X
4Q2010 5-21
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — PULVERIZERS
Pulverizers
Pulverizers
Long Undercarriage
Machine Boom Stick P60 P40 P28 P25 P16
375 L GP 5.5 m 18'0" X
4.4 m 14'5" X X
375 L Reach 5.5 m 18'0" X
4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X X
4.05 m 13'3" X X
3.6 m 11'10" X
3.1 m 10'2" X X
345B L-F Reach 4.8 m 15'9" X
3.9 m 12'10" X
3.4 m 11'2" X
345B L-V Reach 3.9 m 12'10" X
3.4 m 11'2" X X
330B L Reach 3.9 m 12'10" X
3.3 m 10'10" X X
325B L Reach 3.2 m 10'6" X
2.7 m 8'10" X X
322B L Reach 3.6 m 11'10" X
2.95 m 9'8" X
2.5 m 8'2" X
320B L Reach 3.9 m 12'10" X
2.9 m 9'6" X
2.5 m 8'2" X
1.9 m 6'3" X
5-22 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — CRUSHERS
Crushers
Crushers
Long Undercarriage
Machine Boom Stick CR50 CR35 CR28 CR20
375 L GP 5.5 m 18'0" X
4.4 m 14'5" X
375 L Reach 5.5 m 18'0" X
4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X
4.05 m 13'3" X
3.6 m 11'10" X
3.1 m 10'2" X
345B L-F Reach 4.8 m 15'9" X
3.9 m 12'10" X
3.4 m 11'2" X
345B L-V Reach 3.9 m 12'10" X
3.4 m 11'2" X
330B L Reach 3.9 m 12'10" X
3.3 m 10'10" X
325B L Reach 3.2 m 10'6" X
2.7 m 8'10" X
322B L Reach 3.6 m 11'10" X
2.95 m 9'8" X
2.5 m 8'2" X
320B L Reach 3.9 m 12'10"
2.9 m 9'6"
2.5 m 8'2"
1.9 m 6'3" X
4Q2010 5-23
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — GRAPPLES
Grapples
5-24 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — GRAPPLES
Grapples (continued)
4Q2010 5-25
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — GRAPPLES
Grapples (continued)
5-26 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — GRAPPLES
Grapples (continued)
4Q2010 5-27
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MECHANICAL TOOLS
Mechanical Tools
Mechanical Tools
Long Undercarriage
Machine Boom Stick P140 P130 P120 P115 S128 S115
375 L GP 5.5 m 18'0" X
4.4 m 14'5" X
375 L Reach 5.5 m 18'0" X
4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X X
4.05 m 13'3" X X
3.6 m 11'10" X X
3.1 m 10'2" X X
345B L-F Reach 4.8 m 15'9" X X
3.9 m 12'10" X X
3.4 m 11'2" X X
345B L-V Reach 3.9 m 12'10" X X
3.4 m 11'2" X X
330B L Reach 3.9 m 12'10" X X X
3.3 m 10'10" X X X
325B L Reach 3.2 m 10'6" X X
2.7 m 8'10" X X
322B L Reach 3.6 m 11'10" X X X
2.95 m 9'8" X X X
2.5 m 8'2" X X X
320B L Reach 3.9 m 12'10" X
2.9 m 9'6" X X
2.5 m 8'2" X X
1.9 m 6'3" X X
318B L 3.2 m 10'6" X
2.7 m 8'10" X X
2.25 m 7'5" X X
315B L 3.1 m 10'2" X
2.6 m 8'6" X
2.25 m 7'5" X
5-28 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Multi-Processors
Multi-Processors
Machine Boom Stick MP40 MP30 MP20 MP15
375 L GP 5.5 m 18'0" X
4.4 m 14'5" X
375 L Reach 5.5 m 18'0" X
4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X
4.05 m 13'3" X
3.6 m 11'10" X
3.1 m 10'2" X
345B L-F Reach 4.8 m 15'9" X
3.9 m 12'10" X
3.4 m 11'2" X
345B L-V Reach 3.9 m 12'10" X
3.4 m 11'2" X
330B L Reach 3.9 m 12'10" X
3.3 m 10'10" X X
325B L Reach 3.2 m 10'6" X
2.7 m 8'10" X
322B L Reach 3.6 m 11'10" X X
2.95 m 9'8" X X
2.5 m 8'2" X X
320B L Reach 3.9 m 12'10" X
2.9 m 9'6" X
2.5 m 8'2" X
1.9 m 6'3" X
Recommended parts for these new products are shown in the attached high wear GET including cutters, tips and
teeth.
4Q2010 5-29
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
5-30 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
4Q2010 5-31
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — PULVERIZERS
5-32 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — PULVERIZERS
4Q2010 5-33
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — CRUSHERS
5-34 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — Cutting Edge Group Recommended Parts List — Crusher Tooth Group
S/N ABR1-UP Model MP15 S/N ABR1-UP Model MP15
Part of 179-6771 Jaw Group — Shear Part of 179-6764 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
169-0385 Edge – cutting 4 169-0385 Edge – cutting 2
169-0386 Shim (1 mm) 12 169-0386 Shim (1 mm) 4
169-0388 Shim (1.5 mm) 4 169-0388 Shim (1.5 mm) 2
145-4075 Bolt 12 169-6065 Screw – flat head 6
144-2715 Screw – flat head 2 8T-4131 Nut (M20⫻2.50 thread) 6
8T-4131 Nut (M20⫻2.50 thread) 14 8T-4123 Washer – plated (3.5 mm thick) 6
8T-4123 Washer – plated (3.5 mm thick) 14
169-6071 Edge – cutting 1
169-6072 Shim (1 mm) 5
169-6073 Shim (1.5 mm) 1
169-6076 Retainer 8
169-6074 Shim (0.5 mm) 8
169-6075 Shim (1 mm) 10
4Q2010 5-35
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — Crusher Tooth Group Recommended Parts List — Crusher Tooth Group
S/N ABR1-UP Model MP15 S/N ACF1-UP Model MP20
Part of 179-6756 Jaw Group — Crusher Part of 179-6768 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
169-0385 Edge – cutting 2 169-0385 Edge – cutting 2
169-0386 Shim (1 mm) 4 169-0386 Shim (1 mm) 4
169-0388 Shim (1.5 mm) 2 169-0388 Shim (1.5 mm) 2
169-6065 Screw – flat head 6 169-6065 Screw – flat head 6
8T-4131 Nut (M20⫻2.50 thread) 6 8T-4131 Nut (M20⫻2.50 thread) 6
8T-4123 Washer – plated (3.5 mm thick) 6 8T-4123 Washer – plated (3.5 mm thick) 6
Recommended Parts List — Cutting Edge Group Recommended Parts List — Crusher Tooth Group
S/N ACF1-UP Model MP20 S/N ACF1-UP Model MP20
Part of 179-6772 Jaw Group — Shear Part of 179-6765 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
169-7117 Edge – cutting 4 169-0385 Edge – cutting 2
169-7118 Shim (1 mm) 12 169-0386 Shim (1 mm) 4
169-7119 Shim (1.5 mm) 4 169-0388 Shim (1.5 mm) 2
169-0385 Edge – cutting 1 170-3524 Screw – flat head 3
169-0386 Shim (1 mm) 5 169-6065 Screw – flat head 3
169-0388 Shim (1.5 mm) 1 8T-4131 Nut (M20⫻2.50 thread) 6
169-6065 Screw – flat head 6 8T-4123 Washer – plated (3.5 mm thick) 6
145-4075 Bolt 6
144-2715 Screw – flat head 3
8T-4131 Nut (M20⫻2.50 thread) 15
8T-4123 Washer – plated (3.5 mm thick) 15
169-6076 Retainer 9
169-6074 Shim (0.5 mm) 3
169-6075 Shim (1 mm) 6
5-36 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — Crusher Tooth Group Recommended Parts List — Crusher Tooth Group
S/N ACF1-UP Model MP20 S/N ACF1-UP Model MP20
Part of 179-6765 Jaw Group — Pulverizer Part of 179-6757 Jaw Group — Crusher
Part Number Description Quantity Part Number Description Quantity
169-7117 Edge – cutting 2 169-7117 Edge – cutting 2
169-7118 Shim (1 mm) 6 169-7118 Shim (1 mm) 6
169-7119 Shim (1.5 mm) 2 169-7119 Shim (1.5 mm) 2
169-0385 Edge – cutting 2 170-3524 Screw – flat (M20⫻80 mm) 6
169-0386 Shim (1 mm) 6 8T-4131 Nut (M20) 6
169-0388 Shim (1.5 mm) 2 8T-4123 Washer (M20) 6
(35⫻22⫻3.5 mm)
170-3524 Screw – flat head 12
8T-4131 Nut (M20⫻2.50 thread) 12
8T-4123 Washer – plated (3.5 mm thick) 14
169-6066 Edge – cutting 1
169-6072 Shim (1 mm) 5
169-6073 Shim (1.5 mm) 1
7Y-5241 Bolt – Socket head 2
(M20⫻2.50⫻60 mm)
4Q2010 5-37
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
5-38 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
4Q2010 5-39
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — Cutting Edge Group Recommended Parts List — Crusher Tooth Group
S/N AMB1-UP Model MP40 S/N AMB1-UP Model MP40
Part of 179-6763 Jaw Group — Combination Part of 206-8081 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
172-5903 Edge – cutting 2 172-5931 Edge – cutting 2
172-5904 Shim – plate (1 mm) 6 172-5933 Shim – plate (1 mm) 6
172-5905 Shim – plate (1.5 mm) 2 172-5932 Shim – plate (1.5 mm) 2
172-5931 Edge – cutting 2 170-3524 Screw – flat (M20⫻80 mm) 3
172-5933 Shim – plate (1 mm) 6 144-2715 Screw – flat (M20⫻100 mm) 3
172-5932 Shim – plate (1.5 mm) 2 8T-4131 Nut (M20) 6
169-0385 Edge – cutting 1 8T-4123 Washer (M20)
(35⫻22⫻3.5 mm) 6
169-0386 Shim (1 mm) 3
169-0388 Shim (1.5 mm) 1
144-2698 Screw – flat head 7
144-3087 Screw – flat head 10
8T-4131 Nut (M20⫻2.50 thread) 17
8T-4123 Washer – plated (3.5 mm thick) 17
5-40 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MECHANICAL SCRAP SHEARS
Recommended Parts List — Model S115 Recommended Parts List — Model S128
S/N ADY-UP S/N AFF-UP
Part Number Description Quantity Part Number Description Quantity
169-0385 Edge – cutting 4 169-7117 Edge – cutting 4
169-6071 Edge – cutting 1 169-0385 Edge – cutting 1
169-0386 Shim – plate (1 mm) 8 169-7118 Shim – plate (1 mm) 8
169-0388 Shim – plate (1.5 mm) 4 169-7119 Shim – plate (1.5 mm) 4
169-6072 Shim – plate (1 mm) 2 169-0386 Shim – plate (1 mm) 2
169-6073 Shim – plate (1.5 mm) 2 169-0388 Shim – plate (1.5 mm) 2
169-6076 Bushing – lock 8 169-6076 Bushing – lock 9
169-6074 Shim – ring (1 mm) 8 169-6074 Shim – ring (1 mm) 9
169-6075 Shim – ring (1.5 mm) 8 169-6075 Shim – ring (1.5 mm) 9
145-4075 Bolt 6 144-2698 Bolt 6
169-7190 Bolt 6 169-7190 Bolt 6
144-3087 Bolt 2 144-3087 Bolt 3
8T-4131 Nut 14 8T-4131 Nut 15
8T-4123 Washer 14 8T-4123 Washer 15
4Q2010 5-41
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SCRAP SHEARS
Recommended Parts List — Model S305 Recommended Parts List — Model S320
S/N BRD1-UP S/N CDX1-124
Part Number Description Quantity Part Number Description Quantity
171-5509 Edge – cutting 2 169-0385 Edge – cutting 4
171-5510 Edge – cutting 2 169-6071 Edge – cutting 1
171-5512 Shim – plate (1 mm) 2 169-0386 Shim – plate (1 mm) 12
171-5513 Shim – plate (1 mm) 5 169-0388 Shim – plate (1.5 mm) 4
171-5536 Shim – plate (1 mm) 8 169-6072 Shim – plate (1 mm) 4
171-5538 Edge – cutting 4 169-6073 Shim (1.5 mm) 1
172-4013 Screw – flat head 1 169-6076 Retainer 8
172-4014 Screw – flat head 5 169-6074 Shim (0.5 mm) 8
173-8341 Screw – flat head 6 169-6075 Shim (1 mm) 10
8T-4223 Washer – hard 12 145-4075 Bolt 6
8T-4244 Nut 12 170-3524 Screw – flat head 6
144-3087 Screw – flat head 2
Recommended Parts List — Model S320 8T-4131 Nut 14
S/N CDX125-UP 8T-4123 Washer – plated 14
Part Number Description Quantity
169-0385 Edge – cutting 4 Recommended Parts List — Model S320
169-6071 Edge – cutting 1 S/N CDX125-UP Type 2
169-0386 Shim – plate (1 mm) 12 Part Number Description Quantity
169-0388 Shim – plate (1.5 mm) 4 169-0385 Edge – cutting 4
169-6072 Shim – plate (1 mm) 5 169-6071 Edge – cutting 1
169-6073 Shim (1.5 mm) 1 169-0386 Shim – plate (1 mm) 12
169-6076 Retainer 8 169-0388 Shim – plate (1.5 mm) 4
169-6074 Shim (0.5 mm) 8 169-6072 Shim – plate (1 mm) 5
169-6075 Shim (1 mm) 10 169-6073 Shim (1.5 mm) 1
145-4075 Bolt 6 169-6076 Retainer 8
170-3524 Screw – flat head 6 169-6074 Shim (0.5 mm) 8
144-3087 Screw – flat head 2 169-6075 Shim (1 mm) 10
8T-4131 Nut 14 145-4075 Bolt 6
8T-4123 Washer – plated 14 170-3524 Screw – flat head 6
250-1069 Plate – wear 1 144-3087 Screw – flat head 2
8T-2393 Bolt – socket head 3 8T-4131 Nut 14
159-1121 Lockwasher 3 8T-4123 Washer – plated 14
250-1069 Plate – wear 1
8T-2393 Bolt – socket head 3
159-1121 Lockwasher 3
5-42 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SCRAP SHEARS
Recommended Parts List — Model S325 Recommended Parts List — Model S325
S/N CFW1-207 S/N CFW208-UP Type 2
Part Number Description Quantity Part Number Description Quantity
169-7117 Edge – cutting 4 169-7117 Edge – cutting 4
169-0385 Edge – cutting 1 169-0385 Edge – cutting 1
169-7118 Shim – plate (1 mm) 12 169-7118 Shim – plate (1 mm) 12
169-7119 Shim – plate (1.5 mm) 4 169-7119 Shim – plate (1.5 mm) 4
169-0386 Shim – plate (1 mm) 5 169-0386 Shim – plate (1 mm) 5
169-0388 Shim (1.5 mm) 1 169-0388 Shim (1.5 mm) 1
169-6076 Retainer 9 169-6076 Retainer 9
169-6074 Shim (0.5 mm) 9 169-6074 Shim (0.5 mm) 9
169-6075 Shim (1 mm) 12 169-6075 Shim (1 mm) 12
144-2698 Screw – flat head 12 144-2698 Screw – flat head 12
144-3087 Screw – flat head 3 144-3087 Screw – flat head 3
8T-4131 Nut 15 8T-4131 Nut 15
8T-4123 Washer – plated 14 8T-4123 Washer – plated 15
250-1068 Plate – wear 1
Recommended Parts List — Model S325 8T-1447 Bolt – socket head 3
S/N CFW208-UP 159-1121 Lockwasher 3
Part Number Description Quantity
169-7117 Edge – cutting 4 Recommended Parts List — Model S340
169-0385 Edge – cutting 1 S/N CKY1-181
169-7118 Shim – plate (1 mm) 12 Part Number Description Quantity
169-7119 Shim – plate (1.5 mm) 4 172-5903 Edge – cutting 2
169-0386 Shim – plate (1 mm) 5 172-5931 Edge – cutting 2
169-0388 Shim (1.5 mm) 1 169-0385 Edge – cutting 1
169-6076 Retainer 9 172-5904 Shim – plate (1 mm) 6
169-6074 Shim (0.5 mm) 9 172-5933 Shim (1 mm) 6
169-6075 Shim (1 mm) 12 169-0386 Shim (1 mm) 5
144-2698 Screw – flat head 12 169-0388 Shim – plate (1.5 mm) 1
144-3087 Screw – flat head 3 144-2715 Screw – flat head 14
8T-4131 Nut 15 144-5481 Screw – flat head 3
8T-4123 Washer – plated 15 8T-4131 Nut 17
250-1068 Plate – wear 1 8T-4123 Washer – plated 17
8T-1447 Bolt – socket head 3 169-6076 Retainer 10
159-1121 Lockwasher 3 169-6074 Shim (0.5 mm) 10
169-6075 Shim (1 mm) 14
172-5932 Shim (1.5 mm) 2
172-5905 Shim (1.5 mm) 2
4Q2010 5-43
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SCRAP SHEARS
Recommended Parts List — Model S340 Recommended Parts List — Model S365
S/N CKY182-249 S/N CLE245-349
Part Number Description Quantity Part Number Description Quantity
145-4078 Lockwasher 3 172-1227 Edge – cutting 2
227-0849 Plate – wear 1 172-1213 Edge – cutting 2
236-2205 Edge – cutting 2 173-2434 Edge – cutting 1
236-2206 Edge – cutting 2 172-1229 Shim – plate (1 mm) 4
236-2207 Edge – cutting 2 172-1226 Shim (1 mm) 4
236-2208 Edge – cutting 1 173-2435 Shim (1 mm) 2
236-2209 Shim – plate (1 mm) 4 173-2436 Shim – plate (1.5 mm) 1
236-2210 Shim (1 mm) 4 144-2715 Screw – flat head 7
236-2211 Shim (1 mm) 3 175-0335 Screw – flat head 3
236-2212 Shim (1.5 mm) 2 8T-4131 Nut 17
236-7874 Bushing 10 8T-4123 Washer – plated 17
174-6393 Bolt – socket head 3 144-3087 Screw – flat head 7
7X-2564 Bolt 6 169-6076 Retainer 14
8T-4123 Washer – plated 18 169-6074 Shim (0.5 mm) 10
8T-4141 Bolt 8 169-6075 Shim (1 mm) 14
8T-4187 Bolt 2 172-1208 Shim (1.5 mm) 2
8T-6381 Bolt 2 172-1228 Shim (1.5 mm) 2
227-0850 Plate – wear 1
Recommended Parts List — Model S340 174-6480 Bolt – socket head 3
S/N CKY250-UP 145-4078 Lockwasher 3
Part Number Description Quantity
145-4078 Lockwasher 3 Recommended Parts List — Model S365
227-0849 Plate – wear 1 S/N CLE1-244
236-2205 Edge – cutting 2 Part Number Description Quantity
236-2206 Edge – cutting 2 172-1227 Edge – cutting 2
236-2207 Edge – cutting 2 172-1213 Edge – cutting 2
236-2208 Edge – cutting 1 173-2434 Edge – cutting 1
236-2209 Shim – plate (1 mm) 4 172-1229 Shim – plate (1 mm) 4
236-2210 Shim (1 mm) 4 172-1226 Shim (1 mm) 4
236-2211 Shim (1 mm) 3 173-2435 Shim (1 mm) 2
236-2212 Shim (1.5 mm) 2 173-2436 Shim – plate (1.5 mm) 1
236-7874 Bushing 10 144-2715 Screw – flat head 7
174-6393 Bolt – socket head 3 175-0335 Screw – flat head 3
7X-2564 Bolt 6 8T-4131 Nut 17
8T-4123 Washer – plated 18 8T-4123 Washer – plated 17
8T-4141 Bolt 8 144-3087 Screw – flat head 7
8T-4187 Bolt 2 169-6076 Retainer 14
8T-6381 Bolt 2 169-6074 Shim (0.5 mm) 10
169-6075 Shim (1 mm) 14
172-1208 Shim (1.5 mm) 2
172-1228 Shim (1.5 mm) 2
5-44 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SCRAP SHEARS
Recommended Parts List — Model S365 Recommended Parts List — Model S385B
S/N CLE350-UP S/N C1B1-UP
Part Number Description Quantity Part Number Description Quantity
145-4078 Lockwasher 3 227-4163 Shim (1 mm) 4
227-0850 Plate – wear 1 227-4164 Shim (1.5 mm) 4
227-4166 Edge – cutting 2 227-4167 Edge – cutting 2
227-4167 Edge – cutting 2 236-7874 Bushing 14
234-1361 Edge – cutting 2 240-6811 Shim (1 mm) 4
227-4168 Edge – cutting 1 240-6812 Shim (1 mm) 4
227-4162 Shim – plate (1 mm) 4 240-6813 Edge – cutting 2
227-4163 Shim (1 mm) 3 240-6814 Edge – cutting 2
227-4164 Shim (1.5 mm) 2 240-6815 Shim (1.5 mm) 2
234-1340 Shim (1 mm) 4 240-6816 Shim (1.5 mm) 2
236-7874 Bushing 12 240-6830 Plate – wear 1
174-6480 Bolt – socket head 3 267-6314 Edge – cutting 1
8C-8478 Bolt 2 7X-2488 Bolt (M20⫻2.5⫻160 mm) 3
8T-4123 Washer – plated 22 7X-2565 Bolt (M20⫻2.5⫻100 mm) 2
8T-4187 Bolt 12 8C-8478 Bolt (M20⫻2.5⫻140 mm) 2
8T-6381 Bolt 8 8T-4123 Washer – Plated
(22⫻35⫻3.5 mm thick) 24
8T-4187 Bolt (M20⫻2.5⫻80 mm) 8
Recommended Parts List — Model S365B
8T-6381 Bolt (M20⫻2.5⫻120 mm) 9
S/N C1A1-UP
Part Number Description Quantity
227-4162 Shim (1 mm) 4
227-4163 Shim (1 mm) 4
227-4164 Shim (1.5 mm) 4
227-4166 Edge – cutting 2
227-4167 Edge – cutting 2
227-4169 Plate – wear 1
230-3050 Shim (1.5 mm) 2
234-1340 Shim (1 mm) 4
234-1341 Shim (1.5 mm) 2
234-1361 Edge – cutting 2
236-7874 Bushing 14
267-6314 Edge – cutting 1
7X-2488 Bolt (M20⫻2.5⫻160 mm) 4
7X-2532 Bolt (M20⫻2.5⫻130 mm) 1
7X-2564 Bolt (M20⫻2.5⫻90 mm) 2
8T-4123 Washer – Plated
(22⫻35⫻3.5 mm thick) 24
8T-4187 Bolt (M20⫻2.5⫻80 mm) 8
8T-6381 Bolt (M20⫻2.5⫻120 mm) 9
4Q2010 5-45
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SCRAP SHEARS
Recommended Parts List — Model S390 Recommended Parts List — Model S390
S/N FDK345-449 S/N FDK450-UP
Part Number Description Quantity Part Number Description Quantity
113-7430 Bolt – socket head 4 113-7430 Bolt – socket head 4
145-4078 Lockwasher 4 145-4078 Lockwasher 4
227-0851 Plate – wear 1 227-0851 Plate – wear 1
196-4132 Edge – cutting 2 234-9153 Shim (1 mm) 4
196-4133 Edge – cutting 2 234-9154 Edge – cutting 2
178-6681 Edge – cutting 1 234-9155 Shim (1 mm) 3
178-6684 Shim – plate (1 mm) 2 234-9156 Edge – cutting 2
178-6685 Shim (1.5 mm) 1 234-9157 Edge – cutting 2
196-4129 Shim (1 mm) 4 234-9158 Shim (1 mm) 4
196-4130 Shim (1 mm) 4 234-9159 Edge – end 1
196-4131 Shim (1 mm) 12 234-9164 Shim (1.5 mm) 2
144-5966 Screw – flat head 9 237-3556 Bushing 12
144-7425 Screw – flat head 9 7X-2465 Bolt 2
178-9292 Shim (0.5 mm) 12 7X-2489 Bolt 10
196-4607 Screw – flat head 3 8T-4167 Washer – hard 22
8T-4001 Nut 21 8T-4649 Bolt 10
8T-4167 Washer – hard 21
178-6686 Bushing 12
5-46 4Q2010
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SORTING GRAPPLES
Recommended Parts List — Model G310B Recommended Parts List — Model G315B
S/N AGK1-UP S/N AFZ1-UP
Part Number Description Quantity Part Number Description Quantity
223-1849 Edge – cutting 2 223-5605 Edge – cutting 2
3F-5108 Bolt – plow 16 3F-5108 Bolt – plow 20
4K-0367 Nut – full 16 4K-0367 Nut – full 20
Recommended Parts List — Model G315 Recommended Parts List — Model G320B
S/N ALW1-UP S/N CZNI-UP
Part Number Description Quantity Part Number Description Quantity
174-5567 Edge GP – cutting 223-4698 Edge – cutting 2
7T-3491 Sole 2 5J-4771 Bolt – plow 20
5J-4773 Bolt – plow 14 2J-3506 Nut – full 20
2J-3506 Nut – full 14
4Q2010 5-47
Hydraulic Hammers / Demolition Tools / Rock Drill Tools
NOTES
4Q2010 6-1
Loaders
6-4 4Q2010
Loaders
4Q2010 6-5
Loaders
4Q2010 6-7
Loaders
994
ROCK BUCKETS
Model 994, 994D 994, 994D 994, 994D 994, 994D, 994F 994F
Bucket Assembly 8X-1491 102-2598 113-4105 121-2360 292-9451
8X-0807 102-2606 113-4106 121-2361
8X-1497 102-0673 113-4103 144-2844
102-0676 111-7973
102-2124 111-7974
102-9319 113-4104
102-9326 113-4107
113-4108
Edge Type Spade Spade Spade Spade Spade
Width — inches 222.0 222.0 222.0 222.0 222
mm 5640 5640 5640 5640 5650
Base Edge Assembly 8X-0808** 101-5857** 110-2340** 121-2104 121-2104
Base Edge 8X-0809** 101-5868** 110-2339** 121-2105
Corners (R/L) 8X-0813/6 101-9373/4 101-9373/4 121-2364/7 181-3613/12
Sidebar (RH) 151-9604
(LH) 151-9604
Adapters
Center (3) 4T-4704 (8) 6I-8804 (8) 6I-8804 (8) 6I-8804 6I-8804
RH (3) 4T-4705
LH (3) 4T-4706
Tip Size† J700 J800 J800 J800 J800
Rear Wear Plates
2.36" (60 mm) (2) 8E-3160 (2) 100-4015*** (2) 100-4015*** (2) 100-4015***
3" (75 mm) (2) 100-4015***
Bolts (8) 6V-8360 (8) 6V-8360 (8) 6V-8360 (8) 6V-8360
Nuts (8) 3K-9770 (8) 3K-9770 (8) 3K-9770 (8) 3K-9770
Washers (8) 4K-0684 (8) 4K-0684 (8) 4K-0684 (8) 4K-0684
Bolt-On Segments
Center (2) 8E-3157* (3) 103-1833 107-3383 107-3383
RH (3) 8E-3158* (2) 103-1834 (3) 103-1834 (3) 103-1834
LH (3) 8E-3159* (2) 103-1835 (3) 103-1835 (3) 103-1835
Bolts (40) 6V-8360 (35) 5P-8823 (35) 5P-8823 (35) 5P-8823
Nuts (40) 3K-9770 (35) 3K-9770 (35) 3K-9770 (35) 3K-9770
Half-Arrow Segments
Center (3) 109-9030 109-9033†† 109-9033†† 109-9033
RH (2) 109-9031 (3) 109-9031 (3) 117-6805 117-6805
LH (2) 109-9032 (3) 109-9032 (3) 117-6806 117-6806
Bolts (35) 3K-9770
Nuts (35) 5P-8823
Base Edge Wear Plate
Center (3) 103-1833 (3) 107-3383 (5) 107-3383
Bolts (9) 5P-8823 (9) 5P-8823 (15) 5P-8823
Nuts (9) 3K-9770 (9) 3K-9770 (15) 3K-9770
Sidebar Protectors (2) 125-0800 (2) 125-0800 (2) 125-0800 (2) 125-0800 125-0800
Pins (4) 8E-4708 (4) 8E-4708 (4) 8E-4708 (4) 8E-4708 8E-4708
Retainers (4) 4T-4707 (4) 4T-4707 (4) 4T-4707 (4) 4T-4707 4T-4707
Shear Block (2) 330-4455 (2) 330-4455 (2) 330-4455 (2) 330-4455 330-4455
Rear Weld-On Wear Plate (4) 2A-6724 (4) 2A-6724 (4) 2A-6724 (4) 2A-6724 1U-0740
1U-0739
8E-5559
Shell Liner
Curved 346-9117/8
Side Wear Plate 155-9604
MAWPS
Base 138-0050
Cover 138-0052
Retainers 138-0007
Plug 275-5444
Optional Wing (High Profile)
Bolt-On Edges (4) 4T-6593 (4) 4T-6593 (4) 4T-6593 (4) 4T-6593
Bolts (16) 4F-4042 (16) 4F-4042 (16) 4F-4042 (16) 4F-4042
Nuts (16) 8J-3507 (16) 8J-3507 (16) 8J-3507 (16) 8J-3507
Washers (16) 5P-8250 (16) 5P-8250 (16) 5P-8250 (16) 5P-8250
* These segments are 2.36" (60 mm) thick. Others are 3" (75 mm).
** Edge Assembly Replacement — For optimum performance and value for customers, upgrade earlier style base edges at change time to the 121-2104 edge assembly.
Former edge styles will be discontinued when demand ceases.
*** Wear plate 132-4714. Hex bolt version.
Bolt — Hex
† Tip options found in tip option chart on page 6-400.
†† Top wear plate 229-6596.
NOTE: See Wear Protection Section for Mechanically Attached Wear Plate options.
6-8 4Q2010
Loaders
994
ROCK BUCKETS
Model 994F 994F 994F 994F 994F
Bucket Assembly 267-3581 265-8292 257-3689 257-3687 257-3685
Edge Type Spade Spade Spade Spade Spade
Width — inches 222 222 222 222 222
mm 5650 5650 5650 5650 5650
Base Edge Assembly 121-2104 121-2104 121-2104 121-2104 121-2104
Base Edge 121-2105 121-2105 121-2105 121-2105 121-2105
Corners (R/L) 101-9373/4 101-9373/4 161-3612/3 161-3612/3 161-3612/3
Sidebar (RH) 102-2126 102-2126 161-3578 161-3578 155-1715
(LH) 102-2126 102-2126 161-3578 161-3578 155-1715
Adapters
Center 6I-8804 6I-8804 6I-8804 6I-8804 6I-8804
Tip Size† J800 J800 J800 J800 J800
Rear Wear Plates
RH 144-1281 144-1281 144-1281 144-1281 144-1281
LH 144-1282 144-1282 144-1282 144-1282 144-1282
Center 100-4015 100-4015 100-4015 100-4015 100-4015
Bolts (8) 6V-8360 (8) 6V-8360 (8) 6V-8360 (8) 6V-8360 (8) 6V-8360
Bolts (12) 2H-3758 (12) 2H-3758 (12) 2H-3758 (12) 2H-3758 (12) 2H-3758
Nuts (20) 3K-9770 (20) 3K-9770 (20) 3K-9770 (20) 3K-9770 (20) 3K-9770
Washers (20) 4K-0684 (20) 4K-0684 (20) 4K-0684 (20) 4K-0684 (20) 4K-0684
Half-Arrow Segments
Center 109-9033 109-9033 109-9033 109-9033 109-9033
RH 117-6805 117-6805 117-6805 117-6805 117-6805
LH 117-6806 117-6806 117-6806 117-6806 117-6806
Bolts (35) 3K-9770 (35) 3K-9770 (35) 3K-9770 (35) 3K-9770 (35) 3K-9770
Nuts (35) 5P-8823 (35) 5P-8823 (35) 5P-8823 (35) 5P-8823 (35) 5P-8823
Base Edge Wear Plate
Center (5) 107-3383 (5) 107-3383 (5) 107-3383 (5) 107-3383 (5) 107-3383
Sidebar Protectors 125-0800 125-0800 125-0800 125-0800 125-0800
Pins 8E-4708 8E-4708 8E-4708 8E-4708 8E-4708
Retainers 4T-4707 4T-4707 4T-4707 4T-4707 4T-4707
Shear Block 330-4455 330-4455 330-4455 330-4455 330-4455
Rear Weld-On Wear Plate 1U-0740 1U-0740 1U-0740 1U-0740
1U-0739 1U-0739 1U-0739 1U-0739
8E-5559 8E-5559 8E-5559 8E-5559
Shell Liner
Curved 343-2253
Straight 343-2252
Side Wear Plate 155-9604
Bolt — Hex
† Tip options found in tip option chart on page 6-400.
4Q2010 6-9
Loaders
994
6-10 4Q2010
Loaders
994
4Q2010 6-11
Loaders
994
6-12 4Q2010
Loaders
994
4Q2010 6-13
Loaders
994
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 994 994 994
Bucket Assembly 102-0672 117-7693 102-0632
102-2597 117-7694 102-0639
102-2605 117-7695 102-2505
102-0663 117-7696 102-2592
102-0675 117-7697 102-0640
102-2123 117-7698 102-0648
MODULOK Edge Type Spade Spade Spade
Bucket Width — inches 222.0 222.0 245.0
mm 5640 5640 6220
Base Edge Assembly — 4" (100 mm) 101-8963 117-7692 101-8965
Adapter (8) 101-1808 (8) 101-1808 (9) 101-1808
Bucket Corners RH/LH 102-9716/7 102-9716/7 102-9716/7
Wear Plate — 2.36" (60 mm)
End (2) 104-2001 (2) 104-2001 (2) 104-2001
Center (4) 9W-4493 (4) 9W-4493 (3) 9W-4493
Intermediate (2) 6Y-0022
Bolts (30) 5P-8823** (30) 5P-8823** (33) 5P-8823**
Nuts (30) 3K-9770 (30) 3K-9770 (33) 3K-9770
Washers (30) 4K-0684 (30) 4K-0684 (33) 4K-0684
Edge Cover
Center (3) 128-5928 128-5929 128-5929
RH (2) 128-5926 (3) 128-5926 (3) 128-5926
LH (2) 128-5927 (3) 128-5927 (3) 128-5927
Adapter Cover (8) 117-6801 (8) 117-6801* (9) 117-6801
Pins (8) 125-0808 (8) 125-0808 (9) 125-0808
Retainer Assemblies (8) 125-0809 (8) 125-0809 (9) 125-0809
Tip Size† J800 J800 J800
Sidebar Protectors (2) 125-0800 (2) 125-0800 (2) 125-0800
Pins (Headed) (4) 8E-4708 (4) 8E-4708 (4) 8E-4708
Retainers (4) 4T-4707 (4) 4T-4707 (4) 4T-4707
Shear Block (2) 330-4455 (2) 330-4455 (2) 330-4455
Bolt-On Wear Plates — 3" (75 mm) (2) 100-4015 (2) 100-4015 (2) 100-4015
Bolts (8) 6V-8360 (8) 6V-8360 (8) 6V-8360
Nuts (8) 3K-9770 (8) 3K-9770 (8) 3K-9770
Washers (8) 4K-0684 (8) 4K-0684 (8) 4K-0684
Optional Replacements
Bolt-On Wear Plates — 2.36" (60 mm) (2) 8E-3160 (2) 8E-3160 (2) 8E-3160
Rear Weld-On Wear Plate (4) 2A-6724 (4) 2A-6724 (4) 2A-6724
Optional Wing (High Profile)
Bolt-On Edges (4) 4T-6593 (4) 4T-6593 (4) 4T-6593
Bolts (16) 4F-4042 (16) 4F-4042 (16) 4F-4042
Nuts (16) 2J-3507 (16) 2J-3507 (16) 2J-3507
Washers (16) 5P-8250 (16) 5P-8250 (16) 5P-8250
** On earlier built Modulok 101-8963 and 101-8965 support assemblies, where 117-6801 adapter cover cannot be pinned, use 109-9199 adapter cover.
** Wear plate 132-4714. Hex bolt version.
Bolt — Hex
† Tip options found in tip option chart on page 6-400.
6-14 4Q2010
Loaders
994
MAA SYSTEM
4Q2010 6-15
Loaders
994
6-16 4Q2010
Loaders
994
4Q2010 6-17
Loaders
994
COAL BUCKETS
Model 994F 994F 994F
Bucket Assembly 257-3693 314-6441 324-1651
Edge Type Straight Straight Spade
Width — inches 245 245 245
mm 6220 6220 6220
Base Edge Assembly 7I-5848 7I-5848
Base Edge 101-6776 101-6776 335-7224
Corners (R/L) 121-2364/67 121-2364/67 335-7145/50
Sidebar (RH) 156-5968 325-6625 335-7226
(LH) 156-5968 325-6625 335-7226
Adapters
Center 100-7416 100-7416
Tip Size† J700 J700
Bolt-On Segments
Center 6I-8364
RH 217-4688
LH 217-4686
RH End 162-3296
LH End 162-3297
Bolts (30) 6V-8360
Nuts (30) 3K-9770
Half-Arrow Segments
Center 109-9030 109-9030
RH 117-6805
LH 117-6806
Bolts (40) 5P-8823 (40) 5P-8823
Nuts (40) 3K-9770 (40) 3K-9770
Base Edge Wear Plate (5) 345-6752
Washers (15) 5P-8250
Bolts (15) 1J-3527
Nuts (15) 2J-3507
Sidebar Protectors 125-0800 125-0800 125-0800
Pins 8E-4708 8E-4708 8E-4708
Retainers 4T-4707 4T-4707 4T-4707
Shear Block 330-4455 330-4455 330-4455
Side Wear Plate 156-5967
Bolt — Hex
† Tip options found in tip option chart on page 6-400.
6-18 4Q2010
Loaders
994
4Q2010 6-19
Loaders
993
ROCK BUCKETS
Model 993K 993K 993K 993K
Bucket Assembly 303-3260 303-3270 303-3280 303-3290
Edge Type Spade Spade Spade Spade
Width — inches 200 200 200 200
mm 5080 5080 5080 5080
Base Edge Assembly 303-3247 343-2209 303-3245 303-3245
Base Edge 303-3236 343-2208 303-3236 303-3236
Sidebar (RH) 310-9146 310-9155 314-6337 314-6422
(LH) 310-9146 310-9155 314-6337 314-6422
Adapters
Center (8) 286-2174 (2) 286-2174 (2) 286-2174 (2) 286-2174
RH (3) 286-2175 (3) 286-2175 (3) 286-2175
LH (3) 286-2176 (3) 286-2176 (3) 286-2176
Tip Size† K170 K170 K170 K170
Bucket Liner
Curved (2) 310-9176
Flat 310-9160
Side Wear Plates 310-9172 310-9172 314-6338 314-6338
† Tip options found in tip option chart on page 6-400.
6-20 4Q2010
Loaders
993
4Q2010 6-21
Loaders
993
6-22 4Q2010
Loaders
993
4Q2010 6-23
Loaders
993
6-24 4Q2010
Loaders
993
COAL BUCKETS
Model 993K
Bucket Assembly 310-8991
Edge Type Straight
Width — inches 248.0
mm 6300
Base Edge 319-4136
Edge Assembly 319-4137
Adapters
Center (10) 319-4136
Tip Size† K170
Sidebar (RH) 319-4126
(LH) 319-4126
Half Arrow Segment (9) 275-5460
Nuts (36) 3K-9770
Bolts (36) 5P-8361
Side Wear Plate (2) 319-4128
Bolt — Hex
† Tip options found in tip option chart on page 6-400.
4Q2010 6-25
Loaders
992
6-26 4Q2010
Loaders
992
ROCK BUCKETS
Model 992G 992G 992, 992B 992, 992B 992C
Bucket Assembly 269-3571 269-3611 8K-8501 3V-2474 3V-6623
Edge Type Spade Spade Spade Spade Spade
Width — inches 167 167 167.0 169.8 181.0
mm 4240 4240 4242 4313 4598
Base Edge Assembly 271-8389 271-8396
Base Edge 271-8390 274-3790
BEEPs 271-8391
Sidebar (RH) 271-8419 271-8419
(LH) 271-8419 271-8419
Corners (R/L) 8K-6489/90 3V-3894/3 3V-3240/39
Adapters
Center (2) 7J-9554 (2) 7J-9554 (2) 3G-9494
RH (3) 7J-9555 (3) 7J-9555 (3) 3G-9495
LH (3) 7J-9556 (3) 7J-9556 (3) 3G-9496
Tip Size† J550 J550 J550
Rear Wear Plates (35 mm) (2) 9K-0071* (2) 6W-0276
Thicker (45 mm) (2) 6Y-3610**
Bolts (8) 4J-9208 (8) 4J-9208
Nuts (8) 2J-3507 (8) 2J-3507
Washers (8) 5P-8250 (8) 5P-8250
Cutting Edge 6I-8364
Center 6I-8365
End 6I-8367
RH 274-3792
LH 274-3793
Sidebar Protectors 1U-0740 1U-0740
Pin 133-0738 133-0738
Retainer 107-8559 107-8559
Side Wear Plate 259-2109 259-2109
MAWPS Base 138-0030
Cover 138-0033
Retainer 138-0006
Plug 275-5444
* 28.5 mm thick.
** Optional rear wear plate 132-4712 requires (4) 1D-4637 hex head bolts, (4) 2J-3507 nuts, (4) 5P-8250 washers.
† Tip options found in tip option chart on page 6-400.
4Q2010 6-27
Loaders
992
6-28 4Q2010
Loaders
992
4Q2010 6-29
Loaders
992
6-30 4Q2010
Loaders
992
4Q2010 6-31
Loaders
992
6-32 4Q2010
Loaders
992
4Q2010 6-33
Loaders
992
6-34 4Q2010
Loaders
992
4Q2010 6-35
Loaders
992
6-36 4Q2010
Loaders
992
4Q2010 6-37
Loaders
992
6-38 4Q2010
Loaders
992
4Q2010 6-39
Loaders
992
6-40 4Q2010
Loaders
992
QUARRY BUCKETS
Model 992G 992G 992G
Bucket Assembly 310-8931 292-9541 283-1931
Edge Type Spade Spade Spade
Width — inches 191 192 199
mm 4840 4884 5060
Base Edge Assembly 247-7247 294-8882 247-7241
Base Edge 247-7238 294-8879 146-8966
BEEPs 275-5464 275-5464
Sidebar (RH) 316-5884 294-8889 218-7108
(LH) 316-5884 294-8889 218-7108
Adapters: Center 232-0158 232-2174 232-2174
Corner 232-0159 232-2175 232-2175
LH 232-2176 232-2176
Adapter Covers 232-0152
Corner 232-0153
Pins 232-0157
Retainer 114-0359
Tip Size† K150 K170 K170
Segment
Center 195-7190 275-5470 275-5470
RH 195-7191 275-5471 275-5471
LH 195-7192 275-5472 275-5472
Bolts (28) 198-1092 (14) 5P-8823 (28) 5P-8823
Nuts (28) 5P-8362 (14) 3K-9770 (28) 3K-9770
Top Plates
Center 208-5327 294-8883
RH 208-5328 294-8884
LH 208-5329 294-8885
Bolts (14) 209-9311
Nuts (28) 3K-9770 (14) 3K-9770
Base Edge Wear Plates
Center 6Y-0311/12 6Y-0311/12 6Y-0311/12
Bolts (6) 1J-4947 (6) 1J-4947 (6) 5P-8250
Nuts (6) 2J-3507 (6) 2J-3507 (6) 5P-8136
Washers (6) 5P-8250 (6) 5P-8250 (6) 2J-2507
Top Base Edge Wear Plate 294-8887
Nuts 2J-3507
Bolts 1J-3527
Washers 5P-8250
MAWPS
Base 138-0030
Wear Plate 229-7067
Retainer 138-0006
Plug 275-5444
Bucket Liner
Flat 310-9038
Curved 310-9037
Side Wear Plate 253-9248 146-7598 294-8805
146-7577
Inner Side Plate 288-8229 288-8229
Sidebar Protectors 316-5883 1U-0740 1U-0740
Pins 133-0738 133-0738
Retainers 107-8559 107-8559
Shear Block 330-4456 330-4456
Wings 288-8235 288-8235
† Tip options found in tip option charts on pages 6-391 and 6-400.
NOTE: See Wear Protection Section for Mechanically Attached Wear Plate options.
4Q2010 6-41
Loaders
992
6-42 4Q2010
Loaders
992
4Q2010 6-43
Loaders
992
6-44 4Q2010
Loaders
992
4Q2010 6-45
Loaders
992
6-46 4Q2010
Loaders
992
4Q2010 6-47
Loaders
992
COAL BUCKETS
Model 992G 992G 992G 992G 992G
Bucket Assembly 191-7178 234-5138 160-4946 159-3791 166-2781
Edge Type Straight Spade Straight Spade Spade
Width — inches 187 189 190 190 190
mm 4747 4800 4824 4824 4824
Base Edge 147-3688 142-5790 142-5790
Edge Assembly 191-7177 214902 112-9033 112-9033
Adapters
Center 3G-4554 119-8604 119-8604 119-8604
RH 3G-4555 119-8605 119-8605 119-8605
LH 3G-4556 119-8606 119-8606 119-8606
Tip Size† J550 J600 J600 J600
Sidebars RH 191-7174 235-8563 214903 209980 209980
LH 191-7174 235-8263 214903 209981 209980
Side Wear Plate 210177 214639
Cutting Edges
Center 195-5125
End 207-8962
Nuts (21) 3K-9770
Bolts (21) 6V-6535
Sidebar Protectors 1U-0740 1U-0740 1U-0740 1U-0740
Pin 1U-0741 1U-0741 1U-0741 1U-0741
Retainers 8E-5559 8E-5559 8E-5559 8E-5559
330-4456 330-4456 330-4456
Shear Block 330-4456
Segments
Center 107-6294 107-6294
RH 107-6295 107-6295
LH 107-6296 107-6296
Nuts (28) 3K-9770 (28) 3K-9770
Bolts (28) 5P-8823 (28) 5P-8823
† Tip options found in tip option chart on page 6-400.
6-48 4Q2010
Loaders
992
4Q2010 6-49
Loaders
992
6-50 4Q2010
Loaders
992
ROCK BUCKETS
Model 992K 992K 992K 992K 992K
Bucket Assembly 294-8981 305-5791 307-9431 314-6371 319-4011
Edge Type Spade Spade Spade Spade Spade
Width — inches 190 190 190 190 190
mm 4821 4821 4821 4826 4826
Base Edge Assembly 343-2227 343-2225 343-2225 342-1624 343-2225
Base Edge 343-2226 343-2224 343-2224 324-1623 343-2224
Sidebar (RH) 307-9516 310-9018 310-9007 324-1685 329-1575
(LH) 307-9516 310-9018 310-9007 324-1685 329-1575
Adapters
Center (2) 232-2174 (2) 195-7154 (2) 195-7154 (8) 232-0159 (2) 195-7154
RH (3) 232-2175 (3) 195-7155 (3) 195-7155 (3) 195-7155
LH (3) 232-2176 (3) 195-7156 (3) 195-7156 (3) 195-7156
Tip Size† K170 K150 K150 K150 K150
Bucket Liner
Flat 310-9028 316-5898 316-5899 310-9028 329-1576
Side Wear Plates 283-1929 271-8465 283-1929 324-1687 329-1574
Sidebar Protectors (2) 1U-0740 (2) 1U-0740 (2) 1U-0740 (2) 1U-0740 (2) 1U-0740
Pin (4) 107-8559 (4) 107-8559 (4) 107-8559 (4) 107-8559 (4) 107-8559
Retainer (4) 133-0738 (4) 133-0738 (4) 133-0738 (4) 133-0738 (4) 133-0738
Adapter Covers
Center (6) 232-0152
Corner (2) 232-0153
Retainer Assembly (8) 114-0350
Half Arrow Segment (7) 275-5460
Nuts (28) 3K-9770
Bolts (28) 5P-8823
Wings (6) 288-8235
† Tip options found in tip option chart on page 6-391.
4Q2010 6-51
Loaders
992
6-52 4Q2010
Loaders
992
4Q2010 6-53
Loaders
992
6-54 4Q2010
Loaders
992
4Q2010 6-55
Loaders
992
COAL BUCKETS
6-56 4Q2010
Loaders
992
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 992B 992B 992C
MODULOK Edge Type Spade Straight Spade
Bucket Width — inches 167.0 167.0 181.0
mm 4242 4242 4597
Bucket Assembly 2V-5034 9K-4047 None
3V-2472
Adapter (7) 8J-3961 (7) 8J-3961 (9) 186-3294
Corner Adapter (2) 3G-1345 (2) 3G-1345
Bucket Corners (2) 9J-1550 (2) 9J-1550 (2) 5V-5460
Wear Plate — End (5) 4T-6542 (2) 4T-6539 (2) 4T-6541
Wear Plate — Center (2) 4T-6543 (3) 4T-6540
Wear Plate — Intermediate (3) 4T-6540
Bolts (18) 4J-9058 (16) 4J-9058 (20) 8J-2928
Nuts (18) 2J-3507 (16) 2J-3507 (20) 2J-3507
Washers (18) 3K-5234 (16) 3K-5234 (20) 5P-8250
Edge Cover — Center (2) 8J-4067 (8) 8J-4067 (2) 8J-3962
Edge Cover — RH (3) 8J-4068 (3) 9J-9973
Edge Cover — LH (3) 8J-4069 (3) 9J-9974
Adapter Cover (35 mm) (9) 8J-3960 (9) 8J-3960 (9) 1U-0741
Pins (9) 107-3378 (9) 107-3378 (9) 107-3378
Retainer Assemblies (9) 107-8559 (9) 107-8559 (9) 107-8559
Tip Size† J550 J550 J550
Sidebar Protectors (2) 8J-4143 (2) 8J-4143 (2) 1U-0740
Pins (Headed) (4) 9J-8441 (4) 9J-8441 (4) 133-0738
Retainer Assemblies (4) 8E-5559 (4) 8E-5559 (4) 107-8559
Retainers (Weld-On Tab) (4) 8J-4889 (4) 8J-4889
Shear Block (2) 341-6010 (2) 341-6010 (2) 330-4456
Optional Replacements
Wear Plate — End (5) 8J-5090 (2) 9J-6836
Wear Plate — Center (2) 8J-5091 (3) 8J-4974
Adapter Cover (45 mm) (9) 8E-9543
Edge Cover — Center (2) 107-8594
Edge Cover — RH (3) 8E-9515
Edge Cover — LH (3) 8E-9516
† Tip options found in tip option chart on page 6-400.
4Q2010 6-57
Loaders
992
6-58 4Q2010
Loaders
992
4Q2010 6-59
Loaders
992
6-60 4Q2010
Loaders
992
4Q2010 6-61
Loaders
992
K SERIES™ ADAPTERS
992 Adapters 51 mm Edge 63.5 mm Edge 70 mm Edge 76.2 mm Edge 90 mm Edge
22.5° Bevel K130 K130 K150 K150 K170 K170 K170
Standard
Center 232-0134 223-8134 232-0154 195-7154 232-0174 232-2174 286-2174
RH 232-0135 223-8135 232-0155 195-7155 232-0175 232-2175 286-2175
LH 232-0136 223-8136 232-0156 195-7156 232-0176 232-2176 286-2176
ARM
Center 232-2134 229-7130 233-7154 232-2150 238-3174 233-7174
RH 232-2135 229-7131 233-7155 232-2151 238-3175 233-7175
LH 232-2136 229-7132 233-7156 232-2152 238-3176 233-7176
Flushmount
Center 229-7134 232-2154
High Abrasion
35° Bevel
Center 232-0138 232-0158
Corner 232-0139 232-0159
Adapter Covers
Center 251-2180 232-0152 286-2178
Corner 251-2461 232-0153 286-2179
Pins 251-6730 232-0157
Retainers 114-0359 114-0359
6-62 4Q2010
Loaders
990
4Q2010 6-63
Loaders
990
ROCK BUCKETS
Model 990 990 990 990
Bucket Assembly 101-9178 4E-9885 151-5979 9U-2027
210-0272 210-0254
210-0256
Edge Type Spade Spade Spade Spade
Width — inches 175.2 175.2 175.2 175.2
mm 4450 4450 4450 4450
Base Edge Assembly 112-2118 112-2119
Base Edge 101-9188 4E-9915 151-5980 4E-9915
Corners (2) 145-6990 (2) 145-6989 (2) 145-6989 (2) 145-6990
Adapters
Center (2) 107-3554 (2) 107-3554
RH (3) 107-3555 (3) 107-3555
LH (3) 107-3556 (3) 107-3556
Tip Size† J550 J550
Bolt-On Segments†† N/A See “Related
Components”
chart
Bolt-On Cutting Edges (40 mm)
R End 162-3297 162-3297
R Center 106-6421 106-6421
Center 106-6420 106-6420
L Center 106-6423 106-6423
L End 162-3296 162-3296
Bolts (24) 5P-8823 (24) 5P-8823
Nuts (24) 3K-9770 (24) 3K-9770
Washers (24) 4K-0684 (24) 4K-0684
Serrated Bolt-On Cutting Edges
RH End (1) 337-2220
LH End (1) 337-2221
RH Center Edge (1) 337-2222
LH Center Edge (1) 337-2223
Center Edge (1) 337-2224
Bolts (32) 5P-8823
Nuts (32) 5P-8362
Base Edge Wear Plates* N/A (2) 1U-4933 (2) 1U-4933 (2) 1U-4933
Bolts (8) 4J-9208 (8) 4J-9208 (8) 4J-9208
Nuts (8) 2J-3507 (8) 2J-3507 (8) 2J-3507
Washers (8) 5P-8250 (8) 5P-8250 (8) 5P-8250
Rear Wear Plates (2) 6Y-3573 (2) 6Y-3573 (2) 6Y-3573 (2) 6Y-3573
Bolts (8) 4J-9208 (8) 4J-9208 (8) 4J-9208 (8) 4J-9208
Nuts (8) 2J-3507 (8) 2J-3507 (8) 2J-3507 (8) 2J-3507
Washers (8) 5P-8250 (8) 5P-8250 (8) 5P-8250 (8) 5P-8250
Sidebar Protectors (2) 1U-0740 (2) 1U-0740 (2) 1U-0740 (2) 1U-0740
Pins (4) 133-0738 (4) 133-0738 (4) 133-0738 (4) 133-0738
Retainer Assemblies (4) 107-8559 (4) 107-8559 (4) 107-8559 (4) 107-8559
Shear Block (2) 330-4456 (2) 330-4456 (2) 330-4456 (2) 330-4456
Outer Lower Wear Plates (2) 4E-9889 (2) 4E-9889 (2) 4E-9889 (2) 4E-9889
* Wide base edge wear plates (9U-9862) can be used with half arrow segments; also, a thicker wear plate (9J6836) is available.
† Tip options found in tip option chart on page 6-400.
†† Top Wear Plates used with Half Arrow Segments. See “Related Components” chart.
6-64 4Q2010
Loaders
990
4Q2010 6-65
Loaders
990
6-66 4Q2010
Loaders
990
4Q2010 6-67
Loaders
990
6-68 4Q2010
Loaders
990
4Q2010 6-69
Loaders
990
6-70 4Q2010
Loaders
990
4Q2010 6-71
Loaders
990
6-72 4Q2010
Loaders
990
SLAG BUCKETS
Model 990 990
Bucket Assembly 294-8900 294-8821
Edge Type Straight Straight
Width — inches 177 180
mm 4500 4560
Base Edge Assembly 294-8978 303-3229
Base Edge 294-8977 303-3228
BEEPs 275-5463
Sidebar (RH) 294-8984 303-3232
(LH) 294-8984 303-3233
Adapters
Center 232-8134 232-0158
Tip Size† K130 K150
Edge Segments 294-8977 (7) 303-3299
Side Wear Plate 271-8354
Sidebar Wear Plate (RH) 294-8997
(LH) 294-8998
Adapter Covers 232-0152
Center 232-0153
Corner 232-0157
Pin Retainers 114-0359
Heel Shroud 157-1019
157-1027
† Tip options found in tip option chart on page 6-391.
COAL BUCKETS
Model 990 990 990 990
Bucket Assembly 217-3299 333-0841 217-3302 217-3304
Edge Type Spade Spade Straight Straight
Width — inches 175 175 194 194
mm 4450 4450 4938 4938
Edge Assembly 101-9188 351-7744 167350 167350
Corners (R/L) 202742 202742
Adapters
Center 3G-4554
RH 3G-4555
LH 3G-4556
Tip Size† J550
Rear Wear Plates 6Y-3573
Bolts (8) 4J-9208
Nuts (8) 2J-3507
Washers (8) 5P-8250
Sidebars
RH 169439 351-7748 167339 172060
LH 169439 351-7748 167340 172060
Side Wear Plate 169440 351-7749
Cutting Edges
Center 9W-8250 9W-8250
End 1U-0761 1U-0761
Nuts (15) 3K-9770 (15) 3K-9770
Bolts (15) 5P-8823 (15) 5P-8823
Sidebar Protectors 1U-0740 1U-0740
Pin 133-0738 133-0738
Retainers 107-8559 107-8559
† Tip options found in tip option chart on page 6-400.
4Q2010 6-73
Loaders
990
6-74 4Q2010
Loaders
990
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 990
Bucket Assembly 101-9179
MODULOK Edge Type Spade
Width — inches 176.6
mm 4486
Base Edge Assembly 102-6214
Adapter (8) 186-3294
Bucket Corners (2) 145-6991
Wear Plate 35 mm 45 mm
End (2) 4T-6541 (2) 100-6358
Center 4T-6539
(2) 4T-6540 (2) 100-6357
Bolts (19) 4J-9208
Nuts (19) 2J-3507
Washers (19) 5P-8250
Adapter Cover (8) 1U-0741
Pins (8) 107-3378
Retainer Assemblies (8) 107-8559
Sidebar Protectors (2) 1U-0740
Pins (Headed) (4) 133-0738
Retainer Assemblies (4) 107-8559
Retainers (Weld-On Tab)
Shear Block (2) 330-4456
Tip Size† J550
Rear Wear Plates (2) 6Y-3573
Bolts (8) 4J-9208
Nuts (8) 2J-3507
Washers (8) 5P-8250
† Tip options found in tip option chart on page 6-400.
4Q2010 6-75
Loaders
990
6-76 4Q2010
Loaders
990
K SERIES™ ADAPTERS
990 Adapters 51 mm Edge 63.5 mm Edge 70 mm Edge
22.5° Bevel K130 K130 K150 K150
Standard
Center 232-0134 223-8134 232-0154 195-7154
RH 232-0135 223-8135 232-0155 195-7155
LH 232-0136 223-8136 232-0156 195-7156
ARM
Center 232-2134 229-7130 233-7154 232-2150
RH 232-2135 229-7131 233-7155 232-2151
LH 232-2136 229-7132 233-7156 232-2152
Flushmount
Center 229-7134
High Abrasion
35° Bevel
Center 232-0138 232-0158
Corner 232-0139 232-0159
Adapter Covers
Center 251-2180 232-0152
Corner 251-2461 232-0153
Pins 251-6730 232-0157
Retainers 114-0359 114-0359
4Q2010 6-77
Loaders
988
6-78 4Q2010
Loaders
988
4Q2010 6-79
Loaders
988
6-80 4Q2010
Loaders
988
4Q2010 6-81
Loaders
988
6-82 4Q2010
Loaders
988
4Q2010 6-83
Loaders
988
6-84 4Q2010
Loaders
988
4Q2010 6-85
Loaders
988
ROCK BUCKETS
Model 988B 988B 988B 988B
Bucket Assembly 9V-0216 2Q-4431 2Q-3930 9V-0218
9V-1341 9V-1343
9V-6603
Edge Type Spade Spade Spade Straight
Width — inches 143.5 143.5 143.5 143.5
mm 3645 3645 3645 3645
Base Edge 8V-9585 8V-9585 8R-4649 9V-0232
Corners (R/L) 7K-9309/10 (2) 145-6982 (2) 145-6982 7K-9309/10
Bolt-On Cutting Edges (35 mm)
R End 9W-5735
R Center 9W-5736
Center 9W-5733
L Center 9W-5731
L End 9W-5732
Bolts (25) 6V-6535
Nuts (25) 3K-9770
Washers (25) 4K-0684
Base Edge Wear Plates (2) 1U-4929
Bolts (6) 4F-4042
Nuts (6) 2J-3507
Washers (6) 5P-8250
Rear Wear Plates
(25 mm) (2) 9V-5793 (2) 9V-5793 (2) 9V-5793 (2) 9V-5793
(35 mm) (2) 6Y-3609 (2) 6Y-3609 (2) 6Y-3609 (2) 6Y-3609
Bolts (8) 4J-9058 (8) 4J-9058 (8) 4J-9208 (8) 4J-9208
Nuts (8) 2J-3507 (8) 2J-3507 (8) 2J-3507 (8) 2J-3507
Washers (8) 5P-8250 (8) 5P-8250 (8) 5P-8250 (8) 5P-8250
Hex-Bolt Style (25 mm) (2) 132-4713 (2) 132-4713 (2) 132-4713 (2) 132-4713
Bolts (8) 1D-4637 (8) 1D-4637 (8) 1D-4637 (8) 1D-4637
Sidebar Protectors (2) 9J-9600 (2) 9J-9600
Pins (4) 135-9350 (4) 135-9350
Retainer Assemblies (4) 114-0359 (4) 114-0359
Shear Block (2) 331-7417 (2) 331-7417
6-86 4Q2010
Loaders
988
4Q2010 6-87
Loaders
988
6-88 4Q2010
Loaders
988
4Q2010 6-89
Loaders
988
6-90 4Q2010
Loaders
988
4Q2010 6-91
Loaders
988
6-92 4Q2010
Loaders
988
4Q2010 6-93
Loaders
988
6-94 4Q2010
Loaders
988
4Q2010 6-95
Loaders
988
6-96 4Q2010
Loaders
988
4Q2010 6-97
Loaders
988
6-98 4Q2010
Loaders
988
4Q2010 6-99
Loaders
988
6-100 4Q2010
Loaders
988
4Q2010 6-101
Loaders
988
6-102 4Q2010
Loaders
988
4Q2010 6-103
Loaders
988
6-104 4Q2010
Loaders
988
4Q2010 6-105
Loaders
988
6-106 4Q2010
Loaders
988
4Q2010 6-107
Loaders
988
SLAG BUCKETS
Model 988G/H 988G/H 988G/H 988G/H
Bucket Assembly 288-8270 294-8810 325-6720 307-9570
Edge Type Serrated — Spade Serrated — Spade Serrated — Spade Straight
Width — inches 150 150 150 152
mm 3800 3800 3800 3860
Base Edge Assembly 343-2169 343-2169 343-2169 314-6434
Base Edge 292-9432 292-9432 292-9432 307-9485
Sidebar (RH) 292-9436 294-9026 292-9436 314-6435
(LH) 292-9436 294-9026 292-9436 314-6435
Adapters
Center 107-3554
Tip Size† J550
Edge Segments 307-9487
Side Wear Plate 292-9437 294-9027 343-2134
Serrated Cutting Edge
Center 292-9448 292-9448 292-9448
RH 292-9446 292-9446 292-9446
LH 292-9447 292-9447 292-9447
Rear Wear Plates 294-9027
Sidebar Wear Plates
RH 292-9449 294-8997 292-9449 307-9492
LH 292-9452 294-8998 292-9452 307-9493
† Tip options found in tip option chart on page 6-400.
6-108 4Q2010
Loaders
988
COAL BUCKETS
Model 988G/H 988G/H 988G/H 988G/H 988G/H
Bucket Assembly 324-1751 324-1761 324-1701 283-1951 310-9001
Edge Type Straight Straight Straight Straight Straight
Width — inches 149 150 153.5 162 167
mm 3772 3810 3900 4120 4250
Base Edge 4E-8112 335-7279 250-8402 283-1841 319-4006
Edge Assembly 335-7278
Adapters
Center 8E-0464
Tip Size† J460
Sidebar (RH) 335-7276 339-1298 335-7215 271-8439 319-4024
(LH) 335-7277 339-1298 335-7216 271-8439 319-4024
Side Wear Plate 335-7275 339-1299 271-8443 319-4025
Cutting Edges
Center 101-9350 107-3540 (2) 208-5261 (4) 1U-2411
End (2) 102-2184 107-3541 (2) 1U-0761 (12) 2J-3507
Nuts (21) 3K-9770 (21) 3K-9770 (12) 3K-9770 (12) 4F-4042
Bolts (21) 6V-6535 (21) 6V-6535 (12) 6V-8360
Sidebar Protectors 9J-9600
Pin 135-9350
Retainers 114-0359
Floor Liner 253-4050
† Tip options found in tip option chart on page 6-400.
4Q2010 6-109
Loaders
988
6-110 4Q2010
Loaders
988
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 988A 988A 988B 988B 988F
MODULOK Edge Type Spade Straight Spade Spade Spade
Bucket Width — inches 132.1 132.1 143.5 143.5 148.7
mm 3356 3356 3645 3645 3776
Bucket Assembly 2V-6147 None 5V-1224 2Q-4434 9U-4183
9V-1344 4E-0065 2Q-3257
9V-0219 145-6502
Base Edge Assembly 4E-0064 4E-0064 8R-5610
Adapter a,♦ (6) 8E-1464♦ (6) 8E-1464♦ (7) 8E-1464♦ (7) 8E-1464♦ (7) 8E-1464♦
Corner Adapter a,♦ (2) 8E-1465♦ (2) 8E-1465♦ (2) 8E-1465♦ (2) 8E-1465♦ (2) 8E-1465♦
Bucket Corners (2) 145-6976 (2) 145-6983 (2) 145-6983
Wear Plate — Center (2) 4T-6384 (2) 4T-6540 (2) 4T-6384 (2) 4T-6384 (2) 9U-9862
Wear Plate — End (2) 4T-6390 (2) 4T-6384 (2) 4T-6383 (2) 4T-6383 (2) 4T-6383
Bolts (14) 4F-4042 (14) 4F-4042 (16) 4J-9058 (16) 4J-9058 (16) 4J-9058
Nuts (14) 2J-3507 (14) 2J-3507 (16) 2J-3507 (16) 2J-3507 (16) 2J-3507
Washers (14) 5P-8250 (14) 5P-8250 (16) 5P-8250 (16) 5P-8250 (16) 5P-8250
Edge Cover — Center 8J-8313 (7) 8J-6400 (2) 9U-9332 (2) 9U-9332 (2) 9U-9664
Edge Cover — RH (3) 9U-9334 (3) 9U-9334 (3) 9U-9334 (3) 9U-9334
Edge Cover — LH (3) 9U-9333 (3) 9U-9333 (3) 9U-9333 (3) 9U-9333
Adapter Cover♦ (8) 9U-9331 (8) 9U-9331 (9) 9U-9331 (9) 9U-9331 (9) 9U-9331
Pins (8) 6Y-2527♦ (8) 6Y-2527♦ (9) 6Y-2527♦ (9) 6Y-2527 (9) 6Y-2527♦
Retainer Assemblies (8) 8E-6359♦ (8) 8E-6359♦ (9) 8E-6359♦ (9) 8E-6359 (9) 8E-6359♦
Tip Size† J450♦ J450♦ J450♦ J450♦ J450♦
Sidebar Protectors (2) 8J-6399 (2) 8J-6399 (2) 9J-9600 (2) 9J-9600 (2) 9J-9600
Pins (Headed) (4) 9J-8442 (4) 9J-8442 (4) 135-9350 (4) 135-9350 (4) 135-9350
Retainer Assemblies (4) 8E-6359 (4) 8E-6359 (4) 114-0359 (4) 114-0359 (4) 114-0359
Retainers (Weld-On Tab) (4) 8J-4889 (4) 8J-4889
Shear Block (2) 331-7417 (2) 331-7417 (2) 331-7417
Optional Replacements
Wear Plate End (2) 4T-6540 (2) 4T-6539 (2) 4T-6540 (2) 4T-6540 (2) 6I-8607
Wear Plate Center (2) 4T-6553 (2) 4T-6541 (2) 4T-6541 (2) 4T-6541
Rear Wear Plates (25 mm) (2) 9V-5793 (2) 9V-5793 (2) 9V-5793
Heavy Duty (35 mm) (2) 6Y-3609 (2) 6Y-3609 (2) 6Y-3609
Bolts (8) 4J-9058 (8) 4J-9058 (8) 4J-9058
Nuts (8) 2J-3507 (8) 2J-3507 (8) 2J-3507
Washers (8) 5P-8250 (8) 5P-8250 (8) 5P-8250
Hex Bolt Type (25 mm) (2) 132-4713 (2) 132-4713 (2) 132-4713
Hex Bolts (8) 1D-4709 (8) 1D-4709 (8) 1D-4709
a Part of base edge assembly.
† Tip options found in tip option chart on page 6-400.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 6-122 or IRM 91-8.
4Q2010 6-111
Loaders
988
6-112 4Q2010
Loaders
988
4Q2010 6-113
Loaders
988
6-114 4Q2010
Loaders
988
4Q2010 6-115
Loaders
988
K SERIES™ ADAPTERS
988 Adapters 50.8 mm Edge 63.5 mm Edge
22.5° Bevel K110 K130 K130
Bolt-On
Center 315-0117
Bolts (2) 198-1092
Nuts (2) 5P-8362
RH/LH 315-0118/9
Bolts 198-1092
5P-8823
Nuts (2) 3K-9770
Weld-On
Standard
Center 315-0114 232-0134 223-8134
RH 315-0115 232-0135 223-8135
LH 315-0116 232-0136 223-8136
ARM
Center 309-1110 232-2134 229-7130
RH 309-1111 232-2135 229-7131
LH 309-1112 232-2136 229-7132
Flushmount
Center 309-1113 229-7134
High Abrasion
35° Bevel
Center 232-0138
Corner 232-0139
Adapter Covers
Center 232-0152
Corner 232-0153
Pins 251-6730
Retainers 114-0359
6-116 4Q2010
Loaders
988
4Q2010 6-117
Loaders
988
6-118 4Q2010
Loaders
988
4Q2010 6-119
Loaders
983
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 6-122 or IRM 91-8.
ROCK BUCKETS
Bucket Assembly 9K-6024 3V-3342 3V-4193
Width — inches 128.2 129.0 129.5
mm 3257 3277 3289
Base Edge Assembly 8E-0049 a
Base Edge 9V-0235
Corners (R/L) 7K-9309/10
Adapters
Center (4) 7T-8454♦ (4) 4T-7454♦ (8) 4T-7454♦
RH 7T-8455♦ (2) 4T-7455♦
LH 7T-8456♦ (2) 4T-7456♦
Tip Size† J450♦ J450♦ J450♦
a Includes J460 adapters (8E-0464/5/6).
† Tip options found in tip option chart on page 6-400.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 6-122 or IRM 91-8.
SLAG BUCKETS
Bucket Assembly 4V-5288
Width — inches 119.5
mm 3035
Adapters♦
Center♦ (6) 3G-9494
Tip Size† J550
† Tip options found in tip option chart on page 6-400.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 6-122 or IRM 91-8.
6-120 4Q2010
Loaders
983
DEMOLITION BUCKETS
Bucket Arrangement 7K-3916
7K-8710
Bucket Group 7K-3195
Width — inches 95.8
mm 2433
Clamp Assembly 7K-3172
Cutting Edge (Bolt-On) 4T-8376
Bolts (30) 3F-5108
Nuts (30) 4K-0367
Bucket Assembly 7K-3603
Adapters (8) 6K-7850
Tip Size
Long 4K-4962
Rock 6K-7228
Pins 4K-0033
Retainers 4K-0006
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 6-122 or IRM 91-8.
4Q2010 6-121
Loaders
J450 / J460 UPDATE
Though similar in appearance, there is a major difference between the J450 and new
J460 families. The J460 size is not an increase in width from 4.50" to 4.60" (114 mm
to 117 mm). The new J460 parts provide improved retention capabilities by increasing
the pin size from 0.75" to 0.94" (19.05 mm to 23.81 mm) in diameter and the adapter
pin bore from 0.83" to 0.98" (21 mm to 25 mm). The retainer also increased in size.
The tips for both the J450 and J460 adapters, however, are the same. Customers and
dealers should be aware that either the J450 or J460 adapters could be on 988/235
buckets and any other buckets with upsized J450/J460 adapters. Current production
buckets are using J460 adapters exclusively.
The attached list identifies the J450 adapter part numbers along with the J460.
J460 J450
Adapter Number Number
Flushmount — Center 8E-0464 7T-8454
Flushmount — Right 8E-0465 7T-8455
Flushmount — Left 8E-0466 7T-8456
MODULOK System — Center 8E-1464 8J-6396
MODULOK System — Corner 8E-1465 8J-6397
Sidecutter — Right 8E-1468 8J-5185
Sidecutter — Left 8E-1469 8J-5186
Two Strap Excavators — Center 6I-6464 1U-1454
Two Strap Excavators — Right 8E-2465 1U-1455
Two Strap Excavators — Left 8E-2466 1U-1456
Corner Guard — Center 8E-2467 4T-8457
Corner Guard — Right 8E-2468 4T-8459
Corner Guard — Left 8E-2469 4T-8458
Two Strap Loader — Center 8E-3464 4T-7454
Two Strap Loader — Right 8E-3465 4T-7455
Two Strap Loader — Left 8E-3466 4T-7456
Corner Guard — Center 8E-3467 4T-7457
Corner Guard — Right 8E-3468 4T-7459
Corner Guard — Right 8E-3469 4T-9458
Adapter Nose 8E-4464 6Y-3454
Two Strap FS — Right 8E-4465 3G-7455
Two Strap FS — Left 8E-4466 3G-7456
Bottom Strap — Center 8E-5464 9J-3667
Bottom Strap — Right 8E-5465 9J-3665
Bottom Strap — Left 8E-5466 9J-3666
Two Strap Excavators — Right 6I-6465 9W-2455
Two Strap Excavators — Left 6I-6466 9W-2456
Two Strap Loader — Center 8E-2164 4T-8454
Two Strap Loader — Right 8E-2165 4T-8455
Two Strap Loader — Left 8E-2166 4T-8456
Pins 8E-0468 6Y-2527
Retainers 8E-8469 8E-6359
Heavy Duty Pins 114-0468
Heavy Duty Retainer Assemblies 107-3469
6-122 4Q2010
Loaders
980
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-123
Loaders
980
6-124 4Q2010
Loaders
980
4Q2010 6-125
Loaders
980
6-126 4Q2010
Loaders
980
4Q2010 6-127
Loaders
980
6-128 4Q2010
Loaders
980
4Q2010 6-129
Loaders
980
6-130 4Q2010
Loaders
980
4Q2010 6-131
Loaders
980
6-132 4Q2010
Loaders
980
4Q2010 6-133
Loaders
980
6-134 4Q2010
Loaders
980
4Q2010 6-135
Loaders
980
6-136 4Q2010
Loaders
980
4Q2010 6-137
Loaders
980
ROCK BUCKETS
Model 980 980C/F 908C/F 980F
Bucket Assembly 2V-6367 4V-2719 3V-7233 2Q-2827
9V-0222 9V-0221 2Q-2066
9U-1293 9U-1290
9V-6708
Edge Type Spade Spade Spade Spade
Width — inches 129.0 132.7 132.7 132.7
mm 3277 3370 3370 3370
Base Edge Assembly 9V-0233 4E-6807
Base Edge 8V-9580 8V-9581 8V-9581 9V-3561
Corners (R/L) (2) 2V-6299 7K-9309/10 3V-7198/7 3V-7198/7
Adapters
Center (2) 1U-1354 (2) 1U-1350 (2) 1U-1350
RH (2) 1U-1355 (3) 1U-1351 (3) 1U-1351
LH (3) 1U-1356 (3) 1U-1352 (3) 1U-1352
Tip Size† J350 J350 J350
Bolt-On Segments N/A N/A N/A See “Related
Components”
chart
Rear Wear Plates
(40 mm) (2) 7V-0910 (2) 7V-0910 (2) 7V-0910
(35 mm) (2) 9W-6750 (2) 9W-6750 (2) 9W-6750
(20 mm) (2) 9V-6109 (2) 9V-6109 (2) 9V-6109
Bolts (8) 5J-4773 (8) 5J-4773 (8) 5J-4773
Nuts (8) 2J-3506 (8) 2J-3506 (8) 2J-3506
Washers (8) 5P-8248 (8) 5P-8248 (8) 5P-8248
† Tip options found in tip option chart on page 6-400.
6-138 4Q2010
Loaders
980
4Q2010 6-139
Loaders
980
6-140 4Q2010
Loaders
980
4Q2010 6-141
Loaders
980
6-142 4Q2010
Loaders
980
4Q2010 6-143
Loaders
980
6-144 4Q2010
Loaders
980
4Q2010 6-145
Loaders
980
6-146 4Q2010
Loaders
980
4Q2010 6-147
Loaders
980
6-148 4Q2010
Loaders
980
4Q2010 6-149
Loaders
980
6-150 4Q2010
Loaders
980
4Q2010 6-151
Loaders
980
SLAG BUCKETS
Model 980G/H 980G/H 980G/H 980G/H
Bucket Assembly 348-8656 284-3679 310-4017 322-3737
Edge Type Straight Spade Spade Spade
Width — inches 134 134 134 134
mm 3393 3403 3405 3405
Base Edge Assembly 351-0527
Base Edge 351-0526 284-3676 284-3676 284-3676
Corners (R/L) 266-6675/76 266-6675/76 266-6675/76
Sidebar (RH) 312-2294 266-6690 266-6690 323-4129
(LH) 312-2295 266-6690 266-6690
Adapters
Center 229-7130
Tip Size† K130
Side Wear Plate 351-0536 R: 266-6691 R: 266-6691 266-7050/6691
Upper L: 266-7050 L: 266-7050
Cutting Edge
Center 351-0528 284-3674 284-3674
End 284-3675/73 284-3675/73
Segments
Center 284-3674
RH 284-3675
LH 284-3673
† Tip options found in tip option chart on page 6-391.
6-152 4Q2010
Loaders
980
WOODCHIP BUCKETS
Model 980G/H 980G/H
Bucket Assembly 273-2407 304-7839
Edge Type Straight Straight
Width — inches 164 174
mm 4166 4419
Base Edge 194-0681 204-6260
Sidebar (RH) 194-0682 198-2844
(LH) 194-0682 198-2844
Bucket Liner R: 273-2408
Curved L: 273-2409
4Q2010 6-153
Loaders
980
COAL BUCKETS
Model 980G/H 980G/H 980G/H
Bucket Assembly 203-5824 263-6334 332-9202
Edge Type Straight Spade Straight
Width — inches 142 149 158
mm 3606 3772 4017
Base Edge 193-9015 4E-7616 194-0655
Corners (R/L) 7V-4181/80 7V-4181/80 6I-8249/50
Sidebar (RH) 203-8395 194-0656 333-9139
(LH) 203-8396 194-0657 333-9139
Cutting Edge
Center 4T-6588 4T-5273
Nuts 2J-3507 3K-9770
Bolts 8J-2928 5P-8823
SKELETON BUCKETS
Model 980G/H
Bucket Assembly 325-1143
Edge Type Straight
Width — inches 134
mm 3405
Base Edge 111-9770
Corners (R/L) 6I-8249/50
Sidebar (RH) 328-2652
(LH) 328-2652
6-154 4Q2010
Loaders
980
4Q2010 6-155
Loaders
980
6-156 4Q2010
Loaders
980
K SERIES™ ADAPTERS
980 Adapters 111-9770 Edge 45 mm Edge 50 mm Edge
22.5° Bevel K100 K100 K110
Bolt-On
Center 223-8107
Bolts (2) 5P-8361
Nuts (2) 5P-8362
RH/LH 223-8108/9
Bolts 5P-8361
6V-6535
Nuts (2) 3K-9770
Weld-On
Standard
Center 223-8104 232-2114
RH 223-8105 232-2115
LH 223-8106 232-2116
ARM
Center 229-7100 229-7110
RH 229-7101 229-7111
LH 229-7102 229-7112
Flushmount
Center 229-7104 232-2117
4Q2010 6-157
Loaders
980
6-158 4Q2010
Loaders
980
4Q2010 6-159
Loaders
980
6-160 4Q2010
Loaders
980
4Q2010 6-161
Loaders
977
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-162 4Q2010
Loaders
977
4Q2010 6-163
Loaders
977
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V-7347 1V-3669
Bucket Group 5V-7348 1V-3511
Width — inches 96.0 98.0
mm 2438 2489
Dozer Assembly 1V-2074 1V-2074
Bolt-On Cutting Edge
Center 4T-8375 4T-8375
Bolts (15) 5J-4773 a (15) 5J-4773 a
Nuts (15) 1B-4331 (15) 2J-3506
Bowl Assembly 7V-0907 1V-1818
Base Edge 6W-2983
Corners (R/L) 4V-7175/4 8K-7525/6
Adapters
Center (6) 3G-3357 (7) 3G-1357
Bolts (12) 5P-8361 (21) 5P-8136
Nuts (12) 5P-8362 (21) 8J-2933
Corner (R/L) (One-Bolt) 3G-5359/8**
Bolts (2) 5P-8823
Nuts (2) 5P-8362
Corner (R/L) (Two-Bolt) b 8E-5359/8**
Bolts (2) 5P-8361
(2) 6V-6535
Nuts (4) 3K-9770
Tip Size† J350 J350
Bolt-On Edges
Standard
Center Sections (2) 1U-2408
End Bits (2) 3G-6395***
(2) 1U-1897*
Heavy Duty
Bolts (12) 5P-8823
Nuts (12) 3K-9770
* Optional angled end bit.
** Bolt-On adapters that will accommodate larger tips are available. See “Related Components” table.
*** 208-5343 ARM.
a Use 5P-8248 washers on dozer assembly.
b Must install 8E-5310/1 bucket corners.
† Tip options found in tip option chart on page 6-400.
6-164 4Q2010
Loaders
977
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 6-122 or IRM 91-8.
4Q2010 6-165
Loaders
973
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-166 4Q2010
Loaders
973
4Q2010 6-167
Loaders
973
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V-2742 5V-2742 5V-2742
Bucket Group 5V-2744 9V-4315 5G-7305
Width — inches 102.8 102.8 106.7
mm 2610 2610 2710
Dozer Assembly 7V-0995 9V-5670 5G-7314
Cutting Edge 4T-8374
Center 4T-8379 9W-8335
Ends (2) 4T-8353 (2) 4T-8353
Bolts (16) 5J-4771 (16) 5J-4771 (16) 5J-4771
Nuts (16) 2J-3506 (16) 2J-3506 (16) 2J-3506
Bowl Assembly 5G-7306
Base Edge 5V-0600* 5V-0600* 5G-7303**
Corners (R/L) 4V-7175/4 4V-7175/4 4V-7175/4
Adapters
Center (6) 3G-3357 (6) 3G-3357 (6) 3G-3357
Bolts (12) 5P-8361 (12) 5P-8361 (12) 5P-8361
Nuts (12) 5P-8362 (12) 5P-8362 (12) 5P-8362
Corner (R/L) (One-Bolt) 3G-5359/8 3G-5359/8 3G-5359/8
Bolts (2) 5P-8823 (2) 5P-8823 (2) 5P-8823
Nuts (2) 5P-8362 (2) 5P-8362 (2) 5P-8362
Corner (R/L) (Two-Bolt) a 8E-5359/8 8E-5359/8 8E-5359/8
Bolts (2) 5P-8361 (2) 5P-8361 (2) 5P-8361
(2) 6V-6535 (2) 6V-6535 (2) 6V-6535
Nuts (4) 3K-9770 (4) 3K-9770 (4) 3K-9770
Tip Size† J350 J350 J350
Bolt-On Edges
Center Sections (2) 1U-0591 (2) 1U-0591 (2) 9W-8334
End Bits (2) 3G-6395*** (2) 3G-6395*** (2) 3G-6395***
(2) 1U-1897# (2) 1U-1897# (2) 1U-1897#
Bolts (12) 5P-8823 (12) 5P-8823 (12) 5P-8823
Nuts (12) 3K-9770 (12) 3K-9770 (12) 3K-9770
* For bolt-on segments use optional 6W-2982 edge.
** For bolt-on segments use optional 5G-7304 edge.
*** 208-5343 ARM.
a Must install 8E-5310/1 bucket corners.
# Optional angled end bit.
† Tip options found in tip option chart on page 6-400.
6-168 4Q2010
Loaders
973
MULTI-PURPOSE BUCKETS
Model 973C 973C
Bucket Arrangement 219-2785 221-0710
Bucket Group 219-2824 221-0743
Width — inches 106.7 119.4
mm 2710 3032
Dozer Assembly 219-2825 224-1935
Cutting Edge
Center 9W-8335 9W-8335
Ends (2) 4T-8353 (2) 4T-8353
Bolts (16) 5J-4771 (17) 5J-4771
Nuts (16) 2J-3506 (17) 2J-3506
Bowl Assembly 5J-3506 224-1936
Base Edge 5G-7304 9V-6575
Corners (R/L) 4V-7175/4 4V-7175/4
Adapters
Center (6) 3G-3357 (6) 3G-3357
Bolts (12) 5P-8361 (12) 5P-8361
Nuts (12) 5P-8362 (12) 5P-8362
Corner (R/L) 3G-5359/8 3G-5359/8
Bolts (2) 5P-8823 (2) 5P-8823
Nuts (2) 5P-8362 (2) 5P-8362
Tip Size† J350 J350
Bolt-On Segments See “Related See “Related
Components” Components”
chart chart
Bolt-On Cutting Edges See “Related Components” chart for more options
Center (30 mm) (2) 1U-0593 (2) 9W-8334
End Bits — Straight (35 mm) (2) 3G-6395 (2) 3G-6395
End Bits — Angled (35 mm) (2) 1U-1897 (2) 1U-1897
Bolts (12) 5P-8823 (12) 5P-8823
Nuts (12) 3K-9770 (12) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981
LH (1) 286-1980
RH (1) 286-1979
Bolts (Front Row) (8) 5P-8361
Nuts (Front Row) (8) 3K-9770
Bolts (Back Row) (10) 5P-8823
Nuts (Back Row) (10) 3K-9770
† Tip options found in tip option chart on page 6-400.
4Q2010 6-169
Loaders
973
ROCK BUCKET
Bucket Assembly 5V-7346
219-2798
Edge Type Spade
Width — inches 106.5
mm 2705
Base Edge Assembly 9V-0178
Base Edge 9V-0171◊
Corners (R/L) 8K-7525/6
Adapters♦
Center♦ (4) 1U-1350
RH (2) 1U-1351
LH (2) 1U-1352
Tip Size† J350
Rear Wear Plates (2) 7V-0910
Bolts (8) 5J-4773
Nuts (8) 2J-3506
Washers (8) 5P-8248
◊ For segments or bolt-on edges, use 6W-2994 base edge.
† Tip options found in tip option chart on page 6-400.
SLAG BUCKETS
Model 973 973 973C 973C
Bucket Assembly 5V-7344 5V-7344 225-9333 221-3857
Edge Type Straight Straight
Width — inches 106.9 106.9 106.9 106.9
mm 2714 2714 2714 2714
Base Edge Assembly 137-6264 137-6264
Base Edge 9V-0255 9V-0255 9V-0255 9V-0255
Adapters
Center (6) 8E-3464♦ (6) 114-0464 (6) 114-0464
Bottom Wear Plate
Weld-On (25 mm) (2) 7V-7925 (2) 7V-7925
Tip Size† J450♦ J450♦ J460
Base Edge Wear Plates (6) 225-9338
(5) 225-9339
Center (3) 204-0037
RH 204-0038
LH 204-0039
Rear Wear Plates (3) 204-0040 (3) 204-0040
204-0041 204-0041
204-0042 204-0042
204-2006 204-2006
204-2007 204-2007
Hinge Bracket Wear Plates (4) 204-0043 (4) 204-0043
Side Wear Plates (R/L) 204-0023/1 204-0023/1
† Tip options found in tip option chart on page 6-400.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 6-122 or IRM 91-8.
6-170 4Q2010
Loaders
973
SEGMENTS
6W-2982, 5G-7304 Base Edge 9V-6574 Base Edge
Standard (30 mm) (7) 4T-6697 Standard (35 mm) (7) 4T-6700
Heavy Duty (35 mm) (7) 140-6866 Heavy Duty (45 mm) (7) 107-8580
ARM (30 mm) (7) 135-9648 Half Arrow (30 mm) (7) 173-7447
Bolts (14) 5P-8823 Bolts (14) 5P-8823
Nuts (14) 3K-9770 Nuts (14) 3K-9770
6W-2981 Base Edge 6W-2994 Base Edge
Standard (30 mm) (7) 4T-6698 Standard (30 mm)
Heavy Duty (35 mm) (7) 140-6867 Center (2) 4T-3015
Bolts (14) 5P-8823 RH (2) 4T-9123
Nuts (14) 3K-9770 LH (2) 4T-9124
9V-6575 Base Edge Heavy Duty (35 mm)
Standard (30 mm) (7) 4T-6699 Center (2) 140-6862
Heavy Duty (35 mm) (7) 140-6868 RH (2) 140-6863
Half Arrow (30 mm) (7) 174-4114 LH (2) 140-6864
Bolts (14) 5P-8823 Bolts (12) 8T-9079
Nuts (14) 3K-9770 Nuts (12) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981
LH (1) 286-1980
RH (1) 286-1979
Bolts (Front Row) (8) 5P-8361
Nuts (Front Row) (8) 3K-9770
Bolts (Back Row) (10) 5P-8823
Nuts (Back Row) (10) 3K-9770
4Q2010 6-171
Loaders
973
K SERIES™ ADAPTERS
973 Adapters 6W-2982, 5V-0600, 9V-6574, 7V-4188 Edge
5G-7304, 5G-7303,
6W-2981, 4V-9714,
9V-6575 Edge
22.5° Bevel K90 K100
Bolt-On Requires bucket Requires bucket
with two-bolt corner with two-bolt corner
Center 222-1097 223-8107
Bolts (2) 5P-8361 (2) 5P-8361
Nuts (2) 5P-8362 (2) 5P-8362
RH/LH 222-1098/9 223-8108/9
Bolts 5P-8823 5P-8823
6V-8360 6V-8360
Nuts (2) 3K-9770 (2) 3K-9770
6-172 4Q2010
Loaders
973
4Q2010 6-173
Loaders
972G, H
6-174 4Q2010
Loaders
972G, H
4Q2010 6-175
Loaders
972G, H
6-176 4Q2010
Loaders
972G, H
4Q2010 6-177
Loaders
972G, H
6-178 4Q2010
Loaders
972G, H
4Q2010 6-179
Loaders
972G, H
6-180 4Q2010
Loaders
972G, H
4Q2010 6-181
Loaders
972G, H
6-182 4Q2010
Loaders
972G, H
ROCK BUCKETS
Model 972G 972G 972G II 972G 972H
Bucket Assembly 148-6913 206-0898 254-4503 238-9699 254-4500
148-6912 254-4502
148-6908
Edge Type Spade Spade Spade Spade Spade
Width — inches 128 128 128 128 128
mm 3252 3251 3252 3252 3252
Base Edge Assembly 148-6914 254-4505 254-4505
Base Edge 148-6915 148-6914 148-6915 238-9702 148-6915
Sidebar (R/L) (2) 148-6935 (2) 148-6935
Sidebar (RH) 206-5901 242-4209 256-2299
(LH) 206-5901 242-4209 256-2299
Adapters — Weld-On
Heavy Duty
Center (2) 135-9354 135-9354 (2) 222-1094 222-1094
RH (3) 135-9355 135-9355 (3) 222-1095 222-1095
LH (3) 135-9356 135-9356 (3) 222-1096 222-1096
Tip Size† J350 K90
Bolt-On Segments
Center 135-9294 135-9294
RH (3) 135-9295 (3) 135-9295
LH (3) 135-9296 (3) 135-9296
See “Related Components” Chart for more options
Bolts (14) 8T-9079 (14) 8T-9079
Nuts (14) 3K-9770 (14) 3K-9770
Base Edge Wear Plates (Bolt-On)
Center 6Y-6351 6Y-6351
Bolts (4) 6F-0196 (4) 6F-0196
Nuts (4) 2J-3505 (4) 2J-3505
Washers (4) 5P-8249 (4) 5P-8249
Sidebar Protectors (4) 135-8246 (4) 135-8246
Pins (8) 135-9292 (8) 135-9292
Retainer Assemblies (8) 114-0359 (8) 114-0359
Shear Block (4) 331-7418 (4) 331-7418
Rear Wear Plates (Bolt-On) (2) 161-8573 (2) 161-8573 161-8573 161-8573
Bolts (8) 5J-4773 (8) 5J-4773 5J-4773 5J-4773
Nuts (8) 2J-3506 (8) 2J-3506 2J-3506 2J-3506
Washers (8) 5P-8248 (8) 5P-8248 5P-8248 5P-8248
Side Wear Plates
Lower 242-4211 148-6936
Cutting Edge
Center 135-9294
RH 135-9295
LH 135-9296
Nuts 3K-9770
Bolts 8T-9079
Corner Protectors
Nuts 114-0358
Bolts 114-0359
† Tip options found in tip option charts on pages 6-391 and 6-400.
4Q2010 6-183
Loaders
972G, H
6-184 4Q2010
Loaders
972G, H
4Q2010 6-185
Loaders
972G, H
MULTI-PURPOSE BUCKETS
Model 972H 972H 972G 972G
Bucket Assembly 313-1393 323-5583 170-0078 170-0081
Edge Type Straight Straight Straight Straight
Width — inches 126 126 127 127
mm 3220 3220 3225 3225
Base Edge 7I-3015 7I-3015 7I-3015 7I-3015
Corners (R/L) 8E-5310/11 8E-5310/11 8E-5310/11 8E-5310/11
Sidebar (RH) 315-0654/159-8399 315-0654/159-8399 159-8399 159-8399
(LH) 315-0654/159-8399 315-0654/159-8399 159-8399 159-8399
Adapters
Center 3G-3357 3G-3357 3G-3357 3G-3357
RH 8E-5359 8E-5359 8E-5359 8E-5359
LH 8E-5358 8E-5358 8E-5388 8E-5388
Side Wear Plates
Lower 315-0682 315-0682 170-0092 170-0092
Cutting Edge
Center 4T-3107/100-6668 4T-3107/100-6668 4T-3107/100-6668 4T-3107/100-6668
End 3G-4285/3G-6395 3G-4295/3G-4285 3G-6395/3G-4285 3G-6395/3G-4285
LH 5P-8362
Nuts 2J-3506/3K-9770 2J-3506/3K-9770 3K-9770/2J-3506 3K-9770/2J-3506
Bolts 4F-7827/5P-8823 5P-8823/5P-8361 5P-8823/4F-7827 5P-8823/4F-7827
6V-6535/4F-7827
Corner Protectors 253-0064/65 253-0064/65 253-0064/65 253-0064/65
Nuts 3K-9770 3K-9770 3K-9770 3K-9770
Bolts 6V-6535 6V-6535 6V-6535 6V-6535
6-186 4Q2010
Loaders
972G, H
4Q2010 6-187
Loaders
972G, H
COAL BUCKETS
Model 972G 972G
Bucket Assembly 265-0898 192-9113
Edge Type Straight Straight
Width — inches 134 135
mm 3405 3447
Base Edge 111-9770 111-9770
Corners (R/L) 6I-8249/50 6I-8249/50
Sidebar (RH) 267-2625 194-4993
(LH) 267-2625 194-4993
Cutting Edge
Center 109-9212
End 1U-0761
Nuts 3K-9770
Bolts 5P-8823
Corner Protectors 253-0066/67 253-0066/67
Nuts 3K-9770 3K-9770
Bolts 5P-8823 5P-8823
6-188 4Q2010
Loaders
972G, H
SLAG BUCKETS
Model 972G 972G
Bucket Assembly 343-8820 274-6086
Edge Type Straight Straight
Width — inches 128 129
mm 3250 3286
Base Edge 343-8971 274-6088
Sidebar (RH) 344-6441 374-6105
(LH) 344-6441 374-6105
Adapters
Center 315-0114 114-0464
RH 309-1110
Tip Size† K110
Side Wear Plates
Lower 344-6447 274-6104
Cutting Edge
Center 343-9110
† Tip options found in tip option chart on page 6-391.
WOODCHIP BUCKETS
Model 972G 972G
Bucket Assembly 270-3896 333-1653
Edge Type Straight Straight
Width — inches 134 154
mm 2405 3923
Base Edge 111-9770 170-1278
Corners (R/L) 6I-8249/50
Sidebar (RH) 251-7811 157-2744
(LH) 251-7811 157-2744
Cutting Edge
Center 1U-0601
End 1U-1475
Nuts 2J-3507
Bolts 1J-5607
Corner Protectors 253-0066/67
Nuts 3K-9770
Bolts 5P-8823
4Q2010 6-189
Loaders
972G, H
6-190 4Q2010
Loaders
972G, H
SEGMENTS
Base Edge 9V-6575 7I-3015
Bolt-On Segments (7) 4T-6699 (7) 100-6666
Bolt-On Segment — End 308-4322
Bolt-On Segments — Heavy Duty (7) 140-6868 (7) 140-6870
Bolt-On Segment — End Heavy Duty 310-4067
Bolt-On Half-Arrow (7) 174-4114 (7) 313-5550
Bolts (14) 5P-8823 (14) 5P-8823
Nuts (14) 3K-9770 (14) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981 (2) 286-1984
LH (1) 286-1980 (1) 286-1983
RH (1) 286-1979 (1) 286-1982
Bolts (Front Row) (8) 5P-8361 (8) 5P-8361
Nuts (Front Row) (8) 3K-9770 (8) 3K-9770
Bolts (Back Row) (10) 5P-8823 (10) 5P-8823
Nuts (Back Row) (10) 3K-9770 (10) 3K-9770
4Q2010 6-191
Loaders
972G, H
6-192 4Q2010
Loaders
970
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-193
Loaders
970
SEGMENTS
Base Edge 9V-6575 7I-3015 7I-3631
Bolt-On Segments (7) 4T-6699 (7) 100-6666 (7) 100-6664
Bolt-On Segments (Heavy Duty) (7) 140-6868 (7) 140-6870 (7) 140-6869
Bolt-On Half-Arrow (7) 174-4114 (7) 174-4116
Bolts (14) 5P-8823 (14) 5P-8823 (14) 5P-8823
Nuts (14) 3K-9770 (14) 3K-9770 (14) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981 (2) 286-1984
LH (1) 286-1980 (1) 286-1983
RH (1) 286-1979 (1) 286-1982
Bolts (Front Row) (8) 5P-8361 (8) 5P-8361
Nuts (Front Row) (8) 3K-9770 (8) 3K-9770
Bolts (Back Row) (10) 5P-8823 (10) 5P-8823
Nuts (Back Row) (10) 3K-9770 (10) 3K-9770
6-194 4Q2010
Loaders
970
4Q2010 6-195
Loaders
966
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
GENERAL PURPOSE AND MATERIAL HANDLING BUCKETS
Model 966G 966G 966G 966H 966G/966G II
Bucket Assembly 260-6579 233-7407 219-7416 262-8969 133-1679
133-1677
133-1676
146-9627
146-9626
133-1681**
Edge Type Straight Straight Straight Straight CGS
Width — inches 103 112 113 119 119.5
mm 2629 2856 2886 3030 3035
Base Edge Assembly 268-7461
Base Edge 6W-2982 234-1958 141-4847 107-2842 9V-6575
Corners (R/L) 4V-7175/74 4V-7175/74 8E-5310/11 344-8699
Corners (R/L) (One-Bolt) 4V-7175/4
Corners (R/L) (Two-Bolt) 8E-5310/1
Sidebar (RH) 262-8017 234-1961 147-7763 268-7438
(LH) 262-8017 234-1962 147-7763 268-7438
Corner Adapters (R/L) (One-Bolt) 3G-5359/58
Bolts (2) 5P-8823
Nuts (2) 5P-8362
Corner Adapters (R/L) (Two-Bolt)* 8E-5359/8
Bolts (2) 5P-8361
(2) 6V-6535
Nuts (4) 3K-9770
Center Adapter (6) 3G-3357
Bolts (12) 5P-8361
Nuts (12) 5P-8362
Adapters
Center 1U-1354 229-7094
Tip Size† J350
Bolt-On Segments See “Related Components” Chart for more options (7) 4T-6699
Bolts (14) 5P-8823
Nuts (14) 3K-9770
Bolt-On Cutting Edges See “Related Components” Chart for more options (2) 1U-0593
End Bits — Straight (2) 3G-6395
End Bits — Angled (2) 1U-1897
Bolts (12) 5P-8823
Nuts (12) 3K-9770
Rear Wear Plates — Bolt-On (2) 161-8573
Bolts (8) 5J-4773
Nuts (8) 2J-3506
Washers (8) 5P-8248
Rear Wear Plates — Weld-On (4) 128-9623**
Rear Wear Plates 161-8573
Bolts 5J-4773
Nuts 2J-3506
Washers 5P-8248
Side Wear Plate — Lower 262-8032 234-1963 268-7434
Cutting Edge
Center 1U-0591 100-4045 139-9230
End 3G-6395 100-4044 4T-8101
Nuts 3K-9770 3K-9770 2J-3507
Bolts 5P-8823 5P-8823 4F-4042
Corner Protectors (R/L) 253-0062/63 253-0062/63 253-0064/65 253-0064/5
Bolts 6V-6535 6V-6535 6V-6535 (4) 6V-6535
Nuts 3K-9770 3K-9770 3K-9770 (4) 3K-9770
Sidebar Protectors
Pin 114-0358
Retainer 114-0359
Top Mounted Wear Plates
Center (2) 286-1981
LH (1) 286-1980
RH (1) 286-1979
Bolts (Front Row) (8) 5P-8361
Nuts (Front Row) (8) 3K-9770
Bolts (Back Row) (10) 5P-8823
Nuts (Back Row) (10) 3K-9770
CGS — Corner Guard System .
* Must install 8E-5310/1 bucket corners.
** Rear Wear Plate (4) 128-9623 refers only to bucket assembly 133-1681.
† Tip options found in tip option chart on page 6-400.
6-196 4Q2010
Loaders
966
4Q2010 6-197
Loaders
966
6-198 4Q2010
Loaders
966
4Q2010 6-199
Loaders
966
6-200 4Q2010
Loaders
966
4Q2010 6-201
Loaders
966
6-202 4Q2010
Loaders
966
4Q2010 6-203
Loaders
966
6-204 4Q2010
Loaders
966
4Q2010 6-205
Loaders
966
PENETRATION BUCKETS
Model 966D, E, F
Bucket Assembly 6W-5352, 8R-8206
Edge Type FMT
Width — inches 119.7
mm 3040
Base Edge Assembly 6W-5520
Adapters (8) 1U-1354
Tip Size† J350
FMT — Flushmounted Teeth
† Tip options found in tip option chart on page 6-400.
MULTI-PURPOSE BUCKETS
Model 966C 966C 966F
Bucket Arrangement 5V-7338 1V-6370 7Q-8337
Bucket Group 5V-7339 1V-7289
Width — inches 112.1 115.0 119.6
mm 2848 2921 3078
Dozer Assembly 6K-1409 6K-1409 73813**
Cutting Edge
Center 4T-8378 4T-8378 12783**
Ends (2) 4T-8381 (2) 4T-8381 4T-8381
Bolts (19) 4F-7827 (19) 4F-7827 (19) 4F-7827
Nuts (19) 5P-8248 (19) 5P-8248 (19) 5P-8248
Bowl Assembly 7V-0739 1V-7059 79232**
Base Edge 6W-2989 8K-9754 a 9V-6575
Corners (R/L) 5V-2772/3 8K-7525/6
Adapters
Center (6) 3G-7357 (8) 3G-5307 (6) 3G-3357
Bolts (12) 5P-8361 (24) 5P-8136 (12) 5P-8361
Nuts (12) 5P-8362 (24) 8J-2933 (12) 5P-8362
Corner (R/L) (One-Bolt) 3G-5359/8 3G-5359/8
Bolts (2) 5P-8823 (2) 5P-8823
Nuts (2) 5P-8362 (2) 5P-8362
Corner (R/L) (Two-Bolt) b 8E-5359/8 8E-5359/8
Bolts (2) 6V-6535 (2) 6V-6535
(2) 5P-8361 (2) 5P-8361
Nuts (4) 3K-9770 (4) 3K-9770
Tip Size† J350 J300 J350
Bolt-On Edges
Standard — Center Sections (2) 1U-2407 (2) 1U-0593
End Bits (2) 3G-6395*** (2) 3G-6395***
(2) 1U-1897* (2) 1U-1897
Bolts (12) 5P-8823 (12) 5P-8823
Nuts (12) 3K-9770 (12) 3K-9770
Corner Protectors (R/L) b 253-0064/5 253-0064/5
Bolts (4) 6V-6535 (4) 6V-6535
Nuts (4) 3K-9770 (4) 3K-9770
Bolt-On Segments (7) 4T-6698 (7) 4T-6699
Heavy Duty Bolt-On Segments (7) 140-6867 (7) 140-6868
Bolts (14) 5P-8823 (14) 5P-8823
Nuts (14) 3K-9770 (14) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981
LH (1) 286-1980
RH (1) 286-1979
Bolts (Front Row) (8) 5P-8361
Nuts (Front Row) (8) 3K-9770
Bolts (Back Row) (10) 5P-8823
Nuts (Back Row) (10) 3K-9770
* Bolt-On adapters that will accommodate larger tips are available. See “Related Components” table.
** Balderson Part Numbers — 800-255-2372.
*** 208-5343 ARM.
a Edge is discontinued. See “Replacement Base Edges” chart.
b Requires 8E-5320/1 bucket corners.
† Tip options found in tip option chart on page 6-400.
6-206 4Q2010
Loaders
966
ROCK BUCKETS
Model 966 966C 966D, E 966D, E
Bucket Assembly 9V-1807 7K-1075 5V-621 5V-5464
Edge Type Spade Spade Spade Spade
Width — inches 113.0 113.0 113.0 121.5
mm 2870 2870 2870 3085
Base Edge Assembly 9V-0175◊ 7K-1010◊ b 9V-0176*
Base Edge 9V-0174** 7K-1158 b 9V-0170 9V-0170
Corners (R/L) 4K-9757/8 4K-9757/8 8K-7525/6 8K-7525/6
Adapters — Center (2) 1U-1350 (6) 6K-7850 (2) 1U-1350
RH (3) 1U-1351 (3) 1U-1351
LH (3) 1U-1352 (3) 1U-1352
Tip Size† J350 J350
Long 4K-4962
Pins 4K-0033
Retainer Assemblies 4K-0006 a
* For segments or bolt-on edges, use 6W-2993 base edge.
** Consists of edge and weld-on corners.
◊ Consists of edge, corners and adapters.
a Retainer only.
b Edge is discontinued. See “Replacement Base Edges” chart.
† Tip options found in tip option chart on page 6-400.
4Q2010 6-207
Loaders
966
6-208 4Q2010
Loaders
966
4Q2010 6-209
Loaders
966
6-210 4Q2010
Loaders
966
4Q2010 6-211
Loaders
966
CLAMP BUCKETS
Model 966H 966G 966G 966G
Bucket Assembly 312-8558 238-8987 272-0236 243-3055
Edge Type Straight Straight Straight Straight
Width — inches 120 126 126 126
mm 3048 3193 3200 3200
Base Edge 9V-6575 7I-3015 7I-3015 7I-3015
Corners (R/L) 8E-5310/11 8E-5310/11 8E-5310/11 8E-5310/11
Sidebar (RH) 312-8565 238-8994 238-8994 243-3057/58
(LH) 312-8565 238-8994 238-8994 243-3057/58
Cutting Edge
Center 100-6668
End 3G-6395
Nuts 3K-9770
Bolts 5P-8823
Corner Protectors 253-0064/65 253-0064/65 253-0064/65 253-0064/65
Nuts 3K-9770 3K-9770 3K-9770 3K-9770
Bolts 6V-6535 6V-6535 6V-6535 6V-6535
6-212 4Q2010
Loaders
966
4Q2010 6-213
Loaders
966
6-214 4Q2010
Loaders
966
CLEAN UP BUCKETS
Model 966G 966G 966G
Bucket Assembly 170-7221 267-2887 154-3902
Edge Type Straight Straight Straight
Width — inches 118 118 126
mm 2997 2997 3200
Base Edge 7V-0781 170-1278 7I-3015
Corners (R/L) 191797/98 (CB) 267-2927/29 8E-5310/11
Sidebar (RH) 156-0558
(LH) 156-0558
Cutting Edge
Center 1U-0601
End 1U-1475
Nuts 2J-3507
Bolts 1J-5607
Corner Protectors 253-0064/65
Nuts 3K-9770
Bolts 6V-6535
WOODCHIP BUCKETS
Model 966H 966G 966H
Bucket Assembly 303-4626 281-9105 333-1653
Edge Type Straight Straight Straight
Width — inches 108 154 154
mm 2743 3912 3923
Base Edge 9V-6573 170-1278 170-1278
Sidebar (RH) 157-2744 157-2744 157-2744
(LH) 157-2744 157-2744 157-2744
Cutting Edge
Center 1U-0601 1U-0601
End 1U-1475 1U-1475
Nuts 2J-3507 2J-3507
Bolts 1J-5607 1J-5607
4Q2010 6-215
Loaders
966
WASTE BUCKETS
Model 966G 966G 966G 966H 966G
Bucket Assembly 248-4791 221-8557 222-5620 337-1844 280-3279
Edge Type Straight Straight Straight Straight Straight
Width — inches 116 119 119 119 120
mm 2970 3032 3032 3042 3048
Base Edge 9V-6575 9V-6575 9V-6575 7V-0912 9V-6575
Corners (R/L) 4V-7175/74 8E-5310/11 4V-7175/74 4V-7175/74
Sidebar (RH) 248-5091 150-6910 223-4975 339-6515 248-5091
(LH) 248-5091 150-6910 223-4975 339-6515 248-5091
Cutting Edge
Center 1U-0593 1U-0593
End 3G-6395 3G-6395
Nuts 3K-9770 3K-9770
Bolts 5P-8823 5P-8823
Corner Protectors 253-0062/63 253-0064/65 253-0062/63 253-0062/63
Nuts 3K-9770 3K-9770 3K-9770 3K-9770
Bolts 6V-6535 6V-6535 6V-6535 6V-6535
6-216 4Q2010
Loaders
966
SKELETON BUCKETS
Model 966G 966G 966H
Bucket Assembly 261-2219 207-4506 300-2695
Edge Type Straight Spade Straight
Width — inches 126 128 126
mm 3193 3252 3200
Base Edge Assembly 148-6914
Base Edge 7I-3015 148-6915 7I-3015
Corners (R/L) 8E-5310/11 8E-5310/11
Sidebar (RH) 263-4828 208-2206 301-3085
(LH) 263-4828 208-2206 301-3085
Adapters
Center 135-9354
RH 135-9355
LH 135-9356
Corner Protectors 253-0064/65 253-0064/65
Nuts 3K-9770 3K-9770
Bolts 6V-6535 6V-6535
Sidebar Protectors
Pin 114-0358
Retainer 114-0359
4Q2010 6-217
Loaders
966
6-218 4Q2010
Loaders
966
4Q2010 6-219
Loaders
966
BASE EDGES AND RELATED ADAPTER AND SEGMENT COMPONENTS AVAILABLE — Continued
Adapters 1V-3917, 2V-3583*, 9V-0170, 6W-2993 Edge
6W-5520* Edges 9V-0176(+) Edges
J350 K90 J350 K90 J350 J450 (&)
Bucket Corners (R/L) (2) 1V-8664 (#) 8K-7525/6 8K-7525/6
Weld-On Adapters
(Flushmount)
Center 1U-1354 229-7094 1U-1354 229-7094 1U-1354
RH 1U-1355 1U-1355
LH 1U-1356 1U-1356
Bottom Strap
Center 1U-1350 1U-1350 1U-1350
RH 1U-1351 1U-1351
LH 1U-1352 1U-1352
2-Strap
Center 135-9354 222-1094 113-0354 (2) 8E-2164
RH 135-9355 222-1095 113-0355 (3) 8E-2165
LH 135-9356 222-1096 113-0356 (3) 8E-2166
* Consists of edge and weld-on flushmount adapters.
(&) NOTE: If spot replacing a few adapters, use J450 adapter with 6Y-2527 pin and 8E-6359 retainer assembly. However, at base cutting edge wearout/replacement time, upgrade
to J460 adapter with pin and retainer assembly. Make sure to match pin and retainer assembly with the size of the adapters used on the bucket.
(#) No corners required on Penetration Buckets.
(+) Consists of edge and weld-on bottom strap adapters.
SEGMENTS
Base Edge 9V-6575 7I-3015
Bolt-On Segments (7) 4T-6699 (7) 100-6666
Bolt-On Segments (Heavy Duty) (7) 140-6868 (7) 140-6870
Bolt-On Half-Arrow (7) 174-4114 (7) 174-4116
Bolts (14) 5P-8823 (14) 5P-8823
Nuts (14) 3K-9770 (14) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981 (2) 286-1984
LH (1) 286-1980 (1) 286-1983
RH (1) 286-1979 (1) 286-1982
Bolts (Front Row) (8) 5P-8361 (8) 5P-8361
Nuts (Front Row) (8) 3K-9770 (8) 3K-9770
Bolts (Back Row) (10) 5P-8823 (10) 5P-8823
Nuts (Back Row) (10) 3K-9770 (10) 3K-9770
SPADE ROCK
Base Edge 6W-2993
Bolt-On Segments
Center 4T-6697
RH (3) 4T-9123
LH (3) 4T-9124
Bolt-On Segments (Heavy Duty)
Center 140-6866
RH (3) 140-6864
LH (3) 140-6863
Bolt-On Segments (ARM)
Center 135-9648
RH (3) 135-9649
LH (3) 135-9647
Bolts (14) 6V-6535
Nuts (14) 3K-9770
6-220 4Q2010
Loaders
966
4Q2010 6-221
Loaders
963
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-222 4Q2010
Loaders
963
4Q2010 6-223
Loaders
963
MULTI-PURPOSE BUCKETS
Model 963 963 963B 963C 963C
Bucket Arrangement 3V-8710 8V-7364 8Y-9625 219-4534 219-4535
216-9532
Bucket Group 3V-8704 8V-7367 8Y-9626
216-9529
Width — inches 89.6 97.7 97.7 97.7 97.7
mm 2276 2482 2482 2482 2482
Dozer Assembly 4V-4968 8Y-6577 110-4429 219-4700
Cutting Edge
Center 4T-8081 4T-8084 4T-8084 4T-8084 4T-8084
Ends (2) 4T-8085 (2) 4T-8085 (2) 4T-8085 (2) 4T-8085
Bolts (14) 3F-5108 (17) 3F-5108 (17) 3F-5108 (17) 3F-5108 (17) 3F-5108
Nuts (14) 1D-4720 (17) 1D-4720 (17) 1D-4720 (17) 1D-4720 (17) 1D-4720
Bowl Assembly 4V-4967 9V-1085 143-6184 5Q-7742 143-6184
Edge Type CGS CGS CGS
Base Edge 4V-4958◊ 4V-3174◊◊ 6W-2980 6W-2980 6W-2980
Corners (R/L) (One-Bolt) 5V-1783/4 5V-1783/4 5V-1784/3 5V-1784/3 5V-1784/3
Corners (R/L) (Two-Bolt) 8E-5300/1 8E-5300/1 8E-5300/1 8E-5300/1 8E-5300/1
Adapters
Center (6) 4T-4307 (6) 4T-4307 4T-4307 (6) 4T-4307 (6) 4T-4307
Bolts (12) 5P-8136 (12) 5P-8136 (12) 5P-8136 (12) 5P-8136 (12) 5P-8136
Nuts (12) 8J-2933 (12) 8J-2933 (12) 8J-2933 (12) 8J-2933 (12) 8J-2933
Corner (R/L) (One-Bolt) 3G-4309/8 3G-4309/8 3G-4309/8 3G-4309/8 3G-4309/8
Bolts (2) 5P-8823 (2) 5P-8823 (2) 5P-8823 (2) 5P-8823 (2) 5P-8823
Nuts (2) 5P-8362 (2) 5P-8362 (2) 5P-8362 (2) 5P-8362 (2) 5P-8362
Corner (R/L) (Two-Bolt)** 8E-5309/8 8E-5309/8 8E-5309/8 8E-5309/8 8E-5309/8
Bolts (2) 8T-9079 (2) 8T-9079 (2) 8T-9079 (2) 8T-9079 (2) 8T-9079
(2) 6V-8360 (2) 6V-8360 (2) 6V-8360 (2) 6V-8360 (2) 6V-8360
Nuts (4) 3K-9770 (4) 3K-9770 (4) 3K-9770 (4) 3K-9770 (4) 3K-9770
Tip Size† J300 J300 J300 J300 J300
Bolt-On Edges
Center Sections (2) 1U-0599 (2) 1U-0600 (2) 1U-0600 (2) 1U-0600 (2) 1U-0600
End Bits — Straight (2) 4T-8101 (2) 4T-8101 (2) 4T-8101 (2) 4T-8101 (2) 4T-8101
End Bits — Angled (2) 1U-1898* (2) 1U-1898* (2) 1U-1898* (2) 1U-1898* (2) 1U-1898*
Bolts (12) 4F-4042 (12) 4F-4042 (12) 4F-4042 (12) 4F-4042 (12) 4F-4042
Nuts (12) 2J-3507 (12) 2J-3507 (12) 2J-3507 (12) 2J-3507 (12) 2J-3507
Bolt-On Segments (7) 4T-6694 (7) 4T-6694 (7) 4T-6694
Bolts (14) 4F-4042 (14) 4F-4042 (14) 4F-4042
Nuts (14) 2J-3507 (14) 2J-3507 (14) 2J-3507
CGS — Corner Guard System
* Optional angled end bits.
** Must install two-bolt bucket corners.
◊ For bolt-on segments use optional 6W-2979 edge segments listed on page 6-225.
◊◊ For bolt-on segments use optional 6W-2980 edge.
† Tip options found in tip option chart on page 6-400.
6-224 4Q2010
Loaders
963
BASE EDGES AND RELATED ADAPTER AND SEGMENT COMPONENTS AVAILABLE — Continued
Adapters 9V-5340, 9V-5328 Edge 256-4723 Edge 219-3171 Edge
J300 K80 K90 J350
Weld-On Adapters
Center (8) 1U-1304 (8) 229-7084 (8) 229-7094 (8) 1U-1354
Bottom Strap — Center (8) 9J-8929 (8) 1U-1350
4Q2010 6-225
Loaders
963
SEGMENTS
Base Edge 9V-6575 6W-2979 6W-2980 8Y-6263
Bolt-On Segments (7) 4T-6699 (2) 4T-6693 (7) 4T-6694 (2) 4T-6696
(5) 4T-6692 (5) 4T-6697
Bolt-On Segments (Heavy Duty)
Center (7) 140-6868 (7) 132-1035 (2) 140-6865
(5) 140-6866
Bolt-On Half-Arrow (7) 174-4114
Bolts (14) 5P-8823 (14) 4F-4042 (14) 4F-4042 (14) 5P-8823
Nuts (14) 3K-9770 (14) 2J-3507 (14) 2J-3507 (14) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981
LH (1) 286-1980
RH (1) 286-1979
Bolts (Front Row) (8) 5P-8361
Nuts (Front Row) (8) 3K-9770
Bolts (Back Row) (10) 5P-8823
Nuts (Back Row) (10) 3K-9770
6-226 4Q2010
Loaders
962
4Q2010 6-227
Loaders
962
6-228 4Q2010
Loaders
962
4Q2010 6-229
Loaders
962
6-230 4Q2010
Loaders
962
4Q2010 6-231
Loaders
962
6-232 4Q2010
Loaders
962
4Q2010 6-233
Loaders
962
6-234 4Q2010
Loaders
962
4Q2010 6-235
Loaders
962
ROCK BUCKETS
Model 962G 962H 962H 962G 926G
Bucket Assembly 148-7245 148-7245 141-9400 148-7247 148-7247
139-2551
Edge Type Spade Spade Spade Spade Spade
Width — inches 116.8 116 116 116.8 112
mm 2969 2854 2985 2969 2854
Base Edge Assembly 141-8824 141-8824
Base Edge 141-8823 141-8823 141-8823 142-9406 142-9406
Corners (2) 6W-3468 (2) 6W-3468
Corners (R/L) 6W-3468 6W-3468 6W-3468
Sidebar (RH) 148-8941 8R-9843 148-8941
(LH) 148-8942 8R-9843 148-8942
Adapters
Center (2) 1U-1350 1U-1350
RH (3) 1U-1351
LH (3) 1U-1352
Center RH/LH 1U-1352/1U-1351
RH END 9W-4568
LH END 9W-4569
Tip Size† J350
Bolt-On Edges See “Related Components” chart for more options
RH End 109-9017
RH Center 7T-5963
Center 132-1089
LH Center 7T-5961
LH End 109-9016
Bolts (18) 8T-9079
Nuts (18) 3K-9770
Washers (18) 4K-0684
Rear Wear Plates (2) 9W-6747 9W-6747 9W-6747 (2) 9W-6747 9W-6747
Bolts (8) 4F-7827 4F-7827 4F-7827 (8) 4F-7827 4F-7827
Nuts (8) 2J-3506 2J-3507 2J-3507 (8) 2J-3506 2J-3507
Washers (8) 5P-8248 5P-8248 5P-8248 (8) 5P-8248 5P-8248
Cutting Edge
Center 132-1089 132-1089
RH 7T-5963/109-9017 7T-5963/109-9017
LH 7T-5961/109-9016 7T-5961/ 109-9016
Bolts 8T-9079 8T-9079
Nuts 3K-9770 3K-9770
Washers 4K-0684 4K-0684
† Tip options found in tip option chart on page 6-400.
6-236 4Q2010
Loaders
962
MULTI-PURPOSE BUCKETS
Model 962G 962G
Bucket Assembly 199-5000 269-1123
Edge Type Straight Straight
Width — inches 115 115
mm 2921 2929
Base Edge 141-4847 141-4847
Corners (R/L) 8E-5300/01 8E-5300/01
Adapters
Center 4T-4307 4T-4307
RH 8E-5309 8E-5309
LH 8E-5308 8E-5308
Cutting Edge
Center 4T-3731/139-9230 4T-0731
End 4T-6659/4T-8101 4T-6659
Nuts 2J-3506/2J-3507 2J-3506
Bolts 4F-7827/4F-4042 4F-7827
Corner Protectors 253-0062/63 253-0062/63
Nuts 3K-9770 3K-9770
Bolts 8T-9079 8T-9079
4Q2010 6-237
Loaders
962
6-238 4Q2010
Loaders
962
4Q2010 6-239
Loaders
962
SEGMENTS
Base Edge 141-4847 9V-6575 141-4847 257-1828
(K Series only)
Nut — Full 3K-9770
Washer — Hard 4K-0684
Edge — Segment 4T-3015
RH 4T-7139
LH 4T-7140
Bolt — Plow 8T-9079
Bolt-On Segments
Center (7) 132-4715 (7) 4T-6699 (5) 140-7601
Ends (2) 263-7545
Bolt-On Segments (Heavy Duty)
Center (7) 140-6868 (5) 132-4715
Ends (2) 257-1762
Bolt-On Half-Arrow (7) 174-4114
Bolts (14) 4F-4042 (14) 5P-8823 (14) 4F-4042
Nuts (14) 2J-3507 (14) 3K-9770 (14) 2J-3507
Top Mounted Wear Plates
Center (2) 286-1981
LH (1) 286-1980
RH (1) 286-1979
Bolts (Front Row) (8) 5P-8361
Nuts (Front Row) (8) 3K-9770
Bolts (Back Row) (10) 5P-8823
Nuts (Back Row) (10) 3K-9770
6-240 4Q2010
Loaders
960
GENERAL MATERIAL
PURPOSE BUCKETS HANDLING BUCKETS
Model 960F 960F 960F 960F
Bucket Assembly 109-3637 7I-3106 109-3640 107-0582
105-2956 109-3639
Edge Type CGS CGS CGS CGS
Width — inches 108.0 120.0 108.0 120.0
mm 2743 3048 2743 3048
Base Edge 9V-6573 9V-6575 9V-6573 9V-6575
Corners 8E-5300/1 4V-7174/5 8E-5300/1 4V-7174/5
Adapters
Center (6) 4T-4307 (6) 3G-3357 (6) 4T-4307 (6) 3G-3357
Bolts (12) 5P-8136 (12) 5P-8361 (12) 5P-8136 (12) 5P-8361
Nuts (12) 8J-2933 (12) 5P-8362 (12) 8J-2933 (12) 5P-8362
Corner (R/L) (One-Bolt) 3G-5359/8 3G-5359/8
Bolts (2) 5P-8823 (2) 5P-8823
Nuts (2) 5P-8362 (2) 5P-8362
Corner (R/L) (Two-Bolt) 8E-5309/8 (2) 8E-5359/8 a 8E-5309/8 (2) 8E-5359/8 a
Bolts (2) 8T-9079 (2) 5P-8361 (2) 8T-9079 (2) 5P-8361
(2) 6V-8360 (2) 6V-6535 (2) 6V-8360 (2) 6V-6535
Nuts (4) 3K-9770 (4) 3K-9770 (4) 3K-9770 (4) 3K-9770
Tip Size† J300 J350 J300 J350
Bolt-On Edges
Standard — Center Sections (2) 1U-0601 (2) 1U-0593 (2) 1U-0601 (2) 1U-0593
End Bits (2) 4T-8101 (2) 3G-6395* (2) 4T-8101 (2) 3G-6395*
Bolts (12) 4F-4042 (12) 5P-8823 (12) 4F-4042 (12) 5P-8823
Nuts (12) 2J-3507 (12) 3K-9770 (12) 2J-3507 (12) 3K-9770
Corner Protectors (R/L) 253-0062/3 253-0062/3 a 253-0062/3 253-0062/3 a
Bolts (4) 8T-9079 (4) 6V-6535 (4) 8T-9079 (4) 6V-6535
Nuts (4) 3K-9770 (4) 3K-9770 (4) 3K-9770 (4) 3K-9770
Rear Wear Plates
Bolt-On (2) 9W-6747 (2) 9W-6747
Bolts (8) 4F-7827 (8) 4F-7827
Nuts (8) 2J-3506 (8) 2J-3506
Washers (8) 5P-8248 (8) 5P-8248
Weld-On (4) 9V-2899 (4) 9V-2899 6W-4572 107-1798
Top Mounted Wear Plates
Center (2) 286-1981 (2) 286-1981
LH (1) 286-1980 (1) 286-1980
RH (1) 286-1979 (1) 286-1979
Bolts (Front Row) (8) 5P-8361 (8) 5P-8361
Nuts (Front Row) (8) 3K-9770 (8) 3K-9770
Bolts (Back Row) (10) 5P-8823 (10) 5P-8823
Nuts (Back Row) (10) 3K-9770 (10) 3K-9770
CGS — Corner Guard System
* 208-5343 ARM.
a Must install 8E-5310/1 corners.
† Tip options found in tip option chart on page 6-400.
4Q2010 6-241
Loaders
960
ROCK BUCKETS
Model 960F 960F
Bucket Assembly 8R-8618 8R-8619
Edge Type Spade Spade
Width — inches 111.0 111.0
mm 2819 2819
Base Edge Assembly 6W-9879
Base Edge 6W-2973 9C-0967
Corners (2) 6W-3468 (2) 6W-3468
Adapters
Center (2) 1U-1350
RH (3) 1U-1351
LH (3) 1U-1352
Tip Size† J350
Bolt-On Edges
RH End 7T-5960
RH Center 7T-5963
Center 7T-5962
LH Center 7T-5961
LH End 7T-5964
Bolts (18) 8T-9679
Nuts (18) 3K-9770
Washers (18) 4K-0684
Rear Wear Plates (2) 9W-6747 (2) 9W-6747
Bolts (8) 4F-7827 (8) 4F-7827
Nuts (8) 2J-3506 (8) 2J-3506
Washers (8) 5P-8248 (8) 5P-8248
† Tip options found in tip option chart on page 6-400.
6-242 4Q2010
Loaders
960
SEGMENTS
Base Edge 9V-6575
Bolt-On Segments (7) 4T-6699
Bolt-On Segments — Heavy Duty (7) 140-6868
Bolt-On Half-Arrow (7) 174-4114
Bolts (14) 5P-8823
Nuts (14) 3K-9770
Top Mounted Wear Plates
Center (2) 286-1981
LH (1) 286-1980
RH (1) 286-1979
Bolts (Front Row) (8) 5P-8361
Nuts (Front Row) (8) 3K-9770
Bolts (Back Row) (10) 5P-8823
Nuts (Back Row) (10) 3K-9770
4Q2010 6-243
Loaders
955
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-244 4Q2010
Loaders
955
4Q2010 6-245
Loaders
955
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V-7259 9K-8817
Bucket Group 5V-7260 9K-8623
Width — inches 88.4 91.1
mm 2245 2314
Dozer Assembly 9K-8622 9K-8622
Cutting Edge
Center 4T-8074 6K-4084
Bolts (14) 3F-5108 (14) 3F-5108
Nuts (14) 1D-4720 (14) 1D-4720
Bowl Assembly 5V-7261 9K-8618
Base Edge 6W-2978 9K-0658 b
Corners (R/L) 5V-1783/4 8K-7525/6
Corners (R/L) (Two-Bolt) 8E-5300/1
Adapters
Center (6) 4T-4307 (8) 1U-0307
Bolts (12) 5P-8136 (16) 8J-2928
Nuts (12) 8J-2933 (16) 8J-2933
Corner (R/L) (Two-Bolt) 8E-5309/8 a
Bolts (2) 8T-9079
(2) 6V-8360
Nuts (4) 3K-9770
Tip Size† J300 J300
Bolt-On Edges
Center Sections (2) 1U-2410
End Bits (2) 4T-8101
(2) 1U-1898*
Bolts (12) 4F-4042
Nuts (12) 2J-3507
Corner Protectors (R/L) a 253-0062/3
Bolts (4) 8T-9079
Nuts (4) 3K-9770
* Optional angled end bit.
a One-bolt corner uses 3G-4309/8 adapters.
b Edge is discontinued. See “Replacement Base Edges” chart.
† Tip options found in tip option chart on page 6-400.
6-246 4Q2010
Loaders
955
SEGMENTS
Base Edge 6W-2978
Bolt-On Segments (7) 4T-6692
Bolt-On Half-Arrow
Bolts (14) 4F-4042
Nuts (14) 2J-3507
4Q2010 6-247
Loaders
953
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-248 4Q2010
Loaders
953
4Q2010 6-249
Loaders
953
GENERAL
PURPOSE BUCKETS LANDFILL BUCKETS
Model 953C 953C 953C 953C
Bucket Assembly 258-6897 258-6900 225-8190 225-8191
Edge Type CGS FMT FMT CGS
Width — inches 93.3 96 96 93.7
mm 2370 2438.5 2438.5 2380
Base Edge 9V-6572 1V-3916 1V-3916 9V-6572
Corners (R/L) 8E-5302/3 4V-8667/8 4V-8667/8 8E-5302/3
Center Adapter (6) 229-7087 (8) 229-7084 (8) 229-7084 (6) 229-7087
Bolts (12) 8J-2928 (12) 8J-2928
Nuts (12) 8J-2933 (12) 8J-2933
Corner Adapters (R/L) (Two-Bolt) 222-1088/9 222-1088/9
Bolts (2) 6V-6535 (2) 6V-6535
(2) 6V-8360 (2) 6V-8360
Nuts (4) 5P-8362 (4) 5P-8362
Tip Size† K80 K80 K80 K80
Bolt-On Segments (7) 4T-6694 (7) 4T-6694
See “Related Components” Chart for more options
Bolts (14) 1J-5607 (14) 1J-5607
Nuts (14) 2J-3507 (14) 2J-3507
Bolt-On Cutting Edges (2) 1U-0295 (2) 1U-0295
See “Related Components” Chart for more options
End Bits — Straight (2) 4T-8091 (2) 4T-8091
End Bits — Angled (2) 1U-1896 (2) 1U-1896
Bolts (10) 1J-5607 (10) 1J-5607
Nuts (10) 2J-3507 (10) 2J-3507
Corner Protectors (R/L) 253-0060/1 253-0060/1
Bolts (4) 4F-4042 (4) 4F-4042
Nuts (4) 2J-3507 (4) 2J-3507
† Tip options found in tip option chart on page 6-391.
6-250 4Q2010
Loaders
953
4Q2010 6-251
Loaders
953
SEGMENTS
Base Edge 9V-6570 9V-6572
Bolt-On Segments (7) 4T-6692 (7) 4T-6694
Bolt-On Segments — Heavy Duty (7) 132-1035
Bolt-On Half-Arrow
Bolts (14) 4F-4042 (14) 4F-4042
Nuts (14) 2J-3507 (14) 2J-3507
6-252 4Q2010
Loaders
953
4Q2010 6-253
Loaders
951
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-254 4Q2010
Loaders
951
4Q2010 6-255
Loaders
951
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V-4666 9K-3847
Bucket Group 5V-4665 9K-3846
Width — inches 79.8 81.7
mm 2026 2076
Dozer Assembly 9K-3845 9K-3845
Cutting Edge 4T-8073 4T-8073
Bolts (13) 4F-3654 (13) 4F-3654
Nuts (13) 1D-4720 (13) 1D-4720
Bowl Assembly 5V-4672 9K-3729
Base Edge 6W-2977 8K-6452**
Corners (R/L) 4V-1544/5 8K-6455/6
Adapters
Center (6) 1U-0257 (8) 1U-0257
Bolts (12) 5P-8136 (16) 5P-8136
Nuts (12) 8J-2933 (16) 8J-2933
Corner (R/L) (One-Bolt) 3G-4259/8
Bolts (2) 4J-9058
Nuts (2) 8J-2933
Corner (R/L) (Two-Bolt) a 6I-9251/0
Bolts (2) 4F-4042
(2) 4J-9208
Nuts (4) 2J-3507
Tip Size† J250 J250
Bolt-On Edges
Center Sections (2) 1U-0605 (2) 1U-1467
End Bits (2) 4T-8091
(2) 1U-1896*
Bolts (10) 1J-5607 (8) 1J-5607
Nuts (10) 2J-3507 (8) 2J-3507
Corner Protectors (R/L) a 253-0060/1
Bolts (4) 4F-4042
Nuts (4) 2J-3507
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 6I-8310/1 bucket corners.
† Tip options found in tip option chart on page 6-400.
6-256 4Q2010
Loaders
951
4Q2010 6-257
Loaders
950
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-258 4Q2010
Loaders
950
4Q2010 6-259
Loaders
950
6-260 4Q2010
Loaders
950
4Q2010 6-261
Loaders
950
6-262 4Q2010
Loaders
950
4Q2010 6-263
Loaders
950
6-264 4Q2010
Loaders
950
4Q2010 6-265
Loaders
950
6-266 4Q2010
Loaders
950
4Q2010 6-267
Loaders
950
6-268 4Q2010
Loaders
950
PENETRATION BUCKETS
Model 950B, E, F 950B, E, F
Bucket Assembly 6W-4600 6W-4600
Edge Type FMT FMT
Width — inches 108.0 108.0
mm 2744 2744
Base Edge Assembly 6W-4599 6W-4599
Base Edge 6W-4598 6W-4598
Adapters
Center (8) 1U-1304 (8) 229-7084
Tip Size† J300 K80
Rear Wear Plates
Weld-On 6W-4572 6W-4572
FMT — Flushmounted Teeth
† Tip options found in tip option charts on pages 6-391 and 6-400.
MULTI-PURPOSE BUCKETS
Model 950 950
Bucket Arrangement 5V-7272 1V-9785
Bucket Group 5V-7273 2V-3160
Width — inches 104.3 105.8
mm 2648 2686
Dozer Assembly 2V-5139 2V-5139
Cutting Edge
Center 4T-8068 4T-8068
Ends (2) 4T-8078 (2) 4T-8078
Bolts (20) 4F-3654 (20) 4F-3654
Nuts (20) 1D-4720 (20) 1D-4720
Bowl Assembly 5V-7274 2V-2007
Base Edge 6W-2988 8K-8162**
Corners (R/L) 5V-7396/5 8K-6455/6
Adapters
Center (6) 1U-0307 (10) 1U-0307
Bolts (12) 8J-2928 (20) 8J-2928
Nuts (12) 8J-2933 (20) 8J-2933
Corner (R/L) (One-Bolt) 3G-4309/8
Bolts (2) 6V-6535
Nuts (2) 5P-8362
Corner (R/L) (Two-Bolt) a 8E-5309/8
Bolts (2) 8T-9079
(2) 5P-8823
Nuts (4) 3K-9770
Tip Size† J300 J300
Bolt-On Edges
Standard
Center Sections (2) 1U-2413 1U-1470
End Bits (2) 4T-8101 (2) 1U-1469
(2) 1U-1898*
Bolts (10) 1J-5607
Nuts (10) 1J-5607
Corner Protectors (R/L) a 253-0062/3
Bolts (4) 8T-9079
Nuts (4) 3K-9770
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 8E-5302/3 bucket corners.
† Tip options found in tip option chart on page 6-400.
4Q2010 6-269
Loaders
950
ROCK BUCKETS
Model 950B, E, F 950B, E, F 950G 950G 950G
Bucket Assembly 6W-1136 6W-1137 141-9401 141-9400 141-9400
8R-8618 8R-8619
Edge Type Spade Spade Spade Spade Spade
Width — inches 110.8 110.8 116.8 117.0 112
mm 2815 2815 2969 2972 2854
Base Edge Assembly 6W-9879 141-8824
Base Edge 6W-2973 9C-0967 142-9406 141-8823 142-8823
Corners (2) 6W-3468 (2) 6W-3468 (2) 6W-3468 (2) 6W-3468
Corners (R/L) 6W-3468
Sidebar (RH) 8R-9843
(LH) 8R-9843
Adapters
Center (2) 1U-1350 (2) 1U-1350
RH (3) 1U-1351 (3) 1U-1351
LH (3) 1U-1352 (3) 1U-1352
Tip Size† J350 J350
Bolt-On Edges
RH End 7T-5960 109-9017
RH Center 7T-5963 7T-5963
Center 7T-5962 132-1089
LH Center 7T-5961 7T-5961
LH End 7T-5964 109-9016
Bolts (18) 8T-9079 (18) 8T-9079
Nuts (18) 3K-9770 (18) 3K-9770
Washers (18) 4K-0684 (18) 4K-0684
Rear Wear Plates (2) 9W-6747 (2) 9W-6747 (2) 9W-6747 (2) 9W-6747 9W-6747
(8) 4F-7827 (8) 4F-7827 (8) 4F-7827 (8) 4F-7827
(8) 2J-3506 (8) 2J-3506 (8) 2J-3506 (8) 2J-3506
(8) 5P-8248 (8) 5P-8248 (8) 5P-8248 (8) 5P-8248
Bolts 4F-7827
Nuts 2J-3506
Washers 5P-8248
Cutting Edge
Center 132-1089
RH 109-9017/
7T-5963
LH 109-9016/
7T-5961
Nuts 3K-9770
Bolts 8T-9079
Washers 4K-0684
† Tip options found in tip option chart on page 6-400.
6-270 4Q2010
Loaders
950
4Q2010 6-271
Loaders
950
CLAMP BUCKETS
Model 950H 950G 950G
Bucket Assembly 312-4742 226-9132 282-2459
Edge Type Straight Straight Straight
Width — inches 115 119 120
mm 2921 3031 3051
Base Edge 141-4847 9V-6575 9V-6575
Corners (R/L) 8E-5300/01 8E-5310/11 8E-5310/11
Sidebar (RH) 312-5664 282-2455
(LH) 312-5664 282-2455
Corner Protectors 253-0062/63 253-0064/65 253-0064/65
Nuts 3K-9770 3K-9770 3K-9770
Bolts 8T-9079 6V-6535 6V-6535
WOODCHIP BUCKETS
Model 950H 950G 950G
Bucket Assembly 329-7016 221-2591 262-7679
Edge Type Straight Straight Straight
Width — inches 130 132 175
mm 3323 3352 4433
Base Edge 9V-6574 191590 (CB) 108499 (CB)
Corners (R/L) 6I-8249/50 8E-5300/01 8E-5300/01
Sidebar (RH) 308-2391 221-5484 270-4286
(LH) 308-2391 222-9174 270-4286
Cutting Edge
Center 1U-0293
End 4T-8091
RH 1U-0295
LH 1U-0295
Corner Protectors 253-0066/67 253-0062/63 253-0062/63
Nuts 3K-9770 3K-9770 3K-9770
Bolts 5P-8823 8T-9079 8T-9079
6-272 4Q2010
Loaders
950
MULTI-PURPOSE BUCKETS
Model 950H 950H 950G 950G
Bucket Assembly 134-0741 136-0492 199-5000 236-1288
Edge Type Straight Straight Straight Straight
Width — inches 115 115 115 115
mm 2927 2927 2921 2929
Base Edge 141-4847 141-4847 141-4847 141-4847
Corners (R/L) 8E-5300/01 8E-5300/01 8E-5300/01 8E-5300/01
Adapters
Center 4T-4307 4T-4307 4T-4307 4T-4307
RH 8E-5309 8E-5309 8E-5309 8E-5309
LH 8E-5308 8E-5308 8E-5308 8E-5308
Cutting Edge
Center 139-9230 139-9230 139-9230/4T-0731 132-4715/4T-0731
End 4T-8101 4T-8101 4T-8101/6659 4T-6659
Nuts 2J-3507 2J-3507 2J-3507/3506 2J-3507/3506
Bolts 4F-4042 4F-4042 4F-4042/7827 4F-4042/7827
Corner Protectors 253-0062/63 253-0062/63 253-0062/63 253-0062/63
Nuts 3K-9770 3K-9770 3K-9770 3K-9770
Bolts 8T-9079 8T-9079 8T-9079 8T-9079
4Q2010 6-273
Loaders
950
6-274 4Q2010
Loaders
950
BASE EDGES AND RELATED ADAPTER AND SEGMENT COMPONENTS AVAILABLE — Continued
6W-4598◊◊, 9C-0967,
Adapters 1V-3915 Edge 142-9406 Edge
J300 J350
950 Adapters Weld-On Weld-On
Weld-On Flushmount (8) 1U-1304
Weld-On Bottom Strap (8) 9J-8929
Weld-On Adapters
Center (2) 1U-1350
RH (3) 1U-1351
LH (3) 1U-1352
◊◊ Uses (2) 8R-9814 Sidebar.
SEGMENTS
141-4847
Base Edge 6W-2986 6W-2987 9V-6573 141-4847 (K Series only)
Bolt-On Segments
Center (5) 4T-6694 (5) 4T-6694 (7) 4T-6695 (5) 140-7601
Ends (2) 4T-6693 (2) 4T-6695 (2) 263-7545
Bolt-On Segments
Heavy Duty — Center (5) 132-1035 (5) 132-1035 (7) 132-1037 (7) 132-4715 (5) 132-4715
Ends (2) 132-1036 (2) 132-1037 (2) 257-1762
Bolts (14) 4F-4042 (14) 4F-4042 (14) 4F-4042 (14) 4F-4042 (14) 4F-4042
Nuts (14) 2J-3507 (14) 2J-3507 (14) 2J-3507 (14) 2J-3507 (14) 2J-3507
4Q2010 6-275
Loaders
950
6-276 4Q2010
Loaders
943
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-277
Loaders
943
MULTI-PURPOSE BUCKETS
Bucket Arrangement 2V-7274 8V-7363
Bucket Group 2V-7193 8V-7359
Width — inches 82.1 88.8
mm 2086 2256
Dozer Assembly 2V-7183 8V-7942
Cutting Edge
Center 4T-8079 4T-8072
Ends (2) 4T-8082
Bolts (13) 4F-3654 (16) 4F-3654
Nuts (13) 1D-4720 (16) 1D-4720
Bowl Assembly 2V-7195 8V-7628
Base Edge 4V-8335◊ 8V-7453◊◊
Corners (R/L) 4V-1544/5 4V-1544/5
Adapters
Center (6) 1U-0257 (6) 1U-0257
Bolts (12) 5P-8136 (12) 5P-8136
Nuts (12) 8J-2933 (12) 8J-2933
Corner (R/L) (One-Bolt) 3G-4259/8 3G-4259/8
Bolts (2) 4J-9058 (2) 4J-9058
Nuts (2) 8J-2933 (2) 8J-2933
Corner (R/L) (Two-Bolt) a 6I-9251/0 6I-9251/0
Bolts (2) 4F-4042 (2) 4F-4042
(2) 4J-9208 (2) 4J-9208
Nuts (4) 2J-3507 (4) 2J-3507
Tip Size† J250 J250
Bolt-On Edges
Center Sections (2) 1U-0294 (2) 4T-9563
End Bits (2) 4T-8091 (2) 4T-8091
(2) 1U-1896* (2) 1U-1896*
Bolts (10) 1J-5607 (10) 1J-5607
Nuts (10) 2J-3507 (10) 2J-3507
Corner Protectors (R/L) a 253-0060/1 253-0060/1
Bolts (4) 4F-4042 (4) 4F-4042
Nuts (4) 2J-3507 (4) 2J-3507
* Optional angled end bits.
◊ For bolt-on segments, use optional 9V-6571 base edge. See “Related Components” chart.
◊◊ For bolt-on segments, use optional 6W-2976 base edge. See “Related Components” chart.
a Must install 6I-8310/1 bucket corners.
† Tip options found in tip option chart on page 6-400.
6-278 4Q2010
Loaders
943
4Q2010 6-279
Loaders
941
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-280 4Q2010
Loaders
941
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V-4649 9K-3753
Bucket Group 5V-4648 9K-3752
Width — inches 79.8 81.8
mm 2026 2076
Dozer Assembly 9K-3727 9K-3727
Cutting Edge 4T-8073 4T-8073
Bolts (13) 4F-3654 (13) 4F-3654
Nuts (13) 1D-4720 (13) 1D-4720
Bowl Assembly 5V-4647 9K-3373
Base Edge 6W-2977 8K-6452 b
Corners (R/L) 4V-1544/5 8K-6455/6
Adapters
Center (6) 1U-0257 (8) 1U-0257
Bolts (12) 8J-2928 (16) 8J-2928
Nuts (12) 8J-2933 (16) 8J-2933
Corner (R/L) (One-Bolt) 3G-4259/8
Bolts (2) 4J-9058
Nuts (2) 8J-2933
Corner (R/L) (Two-Bolt) a 6I-9251/0
Bolts (2) 4F-4042
(2) 4J-92
Nuts (4) 2J-3507
Tip Size† J250 J250
Bolt-On Edges
Center Sections (2) 1U-0605
End Bits (2) 4T-8091
(2) 1U-1896*
Bolts (10) 1J-5607
Nuts (10) 2J-3507
Corner Protectors (R/L) a 253-0060/1
Bolts (4) 4F-4042
Nuts (4) 2J-3507
* Optional angled end bits.
a Must install 6I-8310/1 bucket corners.
b Edge is discontinued. See “Replacement Base Edges” chart.
† Tip options found in tip option chart on page 6-400.
4Q2010 6-281
Loaders
941
6-282 4Q2010
Loaders
939
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-283
Loaders
939
MULTI-PURPOSE BUCKETS
Bucket Group 8Y-8261 138-1190
Width — inches 85.0 85.0
mm 2160 2160
Dozer Assembly 106-4755 138-3867
Cutting Edge (2) 4T-6231 (2) 4T-6231
Bolts (14) 4F-3654 (14) 4F-3654
Nuts (14) 7X-0448 (14) 7X-0448
Bowl Assembly 106-2316 155-2627
Base Edge 8Y-8763 8Y-8763
Corners (R/L) 4V-1544/5 4V-1545/4
Corner Adapters (R/L) (One-Bolt) 3G-4258/9 3G-4258/9
Bolts (2) 4J-9058 (2) 4J-9058
Nuts (2) 8J-2933 (2) 8J-2933
Corners (R/L) (Two-Bolt) 6I-8311/0 6I-8311/0
Corner Adapters (R/L) (Two-Bolt)* 6I-9251/0 6I-9251/0
Bolts (2) 4F-4042 (2) 4F-4042
(2) 4J-9058 (2) 4J-9058
Nuts (2) 2J-3507 (4) 2J-3507
Center Adapter (6) 1U-0257 (6) 1U-0257
Bolts (12) 8J-2928 (12) 8J-2928
Nuts (12) 8J-2933 (12) 8J-2933
Tip Size† J250 J250
Bolt-On Edges
Center Sections (2) 100-6359 (2) 100-6359
End Bits — Straight (2) 4T-8091 (2) 4T-8091
End Bits — Angled (2) 1U-1896 (2) 1U-1896
Bolts (10) 1J-5607 (10) 1J-5607
Nuts (10) 2J-3507 (10) 2J-3507
Corner Protectors (R/L)* 253-0060/1 253-0060/1
Bolts (4) 4F-4042 (4) 4F-4042
Nuts (4) 2J-3507 (4) 2J-3507
Bolt-On Segments (7) 4T-6692 (7) 4T-6692
Bolts (14) 1J-5607 (14) 1J-5607
Nuts (14) 2J-3507 (14) 2J-3507
* Must install 6I-8310/1 bucket corners.
† Tip options found in tip option chart on page 6-400.
6-284 4Q2010
Loaders
938F / G / H
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-285
Loaders
938F / G / H
6-286 4Q2010
Loaders
938F / G / H
4Q2010 6-287
Loaders
938F / G / H
PENETRATION MULTI-PURPOSE
BUCKETS BUCKETS
Models 938F, G 938G, H
Bucket Group 313-1396
Bucket Assembly 103-7401 313-1391
Edge Type Straight
Width — inches 109.2 108
mm 2774 2745
Rated Capacity — yd3 2.38
m3 1.9
Base Edge Assembly 106-3192
Base Edge N/A 314-8810
Adapters
Center (8) 1U-1254
Tip Size† J250
Bolt-On Edges
Center (2) 107-3746
End Bits (2) 4T-8091
Bolt (10) 1J-5607
Nut (10) 2J-3507
Weld-On Rear Wear Plate 106-3239
* Consists of edge and adapters.
† Tip options found in tip option chart on page 6-400.
6-288 4Q2010
Loaders
938F / G / H
4Q2010 6-289
Loaders
938F / G / H
WASTE BUCKETS
Models 938G, H 938G, H
Bucket Group 159-3205 314-3196
Bucket Assembly 159-3204 314-3239
Edge Type Straight Straight
Width — inches 109 115
mm 2769 2921
Rated Capacity — yd3 6.6 5.0
m3 5.1 3.8
Base Edge 9V-6573 141-4847
Number of Teeth 8
Tip Size† J250
Bolt-On Edges
Center (2) 1U-0601 (2) 139-9230
End Bits (2) 4T-8101 (2) 4T-8101
Bolt (12) 4F-4042 (12) 4F-4042
Nut (12) 2J-3507 (12) 2J-3507
Corner Protectors (R/L) 8E-5300/1 8E-5300/1
Rear Wear Plates (2) 218-0346 (4) 9V-4484
Bottom Wear Plates (2) 218-0344 328-5287
Sidebar Plate (R/L) (2) 322-1449 (2) 318-1461
† Tip options found in tip option chart on page 6-400.
6-290 4Q2010
Loaders
938F / G / H
SEGMENTS
Base Edge 110-4781 105-2345 110-4712
Bolt-On Segments (7) 4T-6694 (7) 4T-6695 (7) 4T-6695
Bolt-On Segments — Heavy Duty (7) 132-1035 (7) 132-1037 (7) 132-1037
Bolts (14) 1J-5607 (14) 1J-5607 (14) 1J-5607
Nuts (14) 2J-3507 (14) 2J-3507 (14) 2J-3507
4Q2010 6-291
Loaders
938F / G / H
6-292 4Q2010
Loaders
936
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-293
Loaders
936
PENETRATION BUCKETS
Models 936E, F 936E, F
Bucket Assembly 9C-4828 103-7401
9V-9522
Width — inches 107.5 109.2
mm 2731 2744
Base Edge Assembly 9V-9521◊ 106-3192
Base Edge 9V-9072 N/A
Adapter
Center (8) 1U-1254 (8) 1U-1254
Tip Size† J250 J250
Weld-On Rear Wear Plate 106-3239
◊ Consists of edge and adapters.
† Tip options found in tip option chart on page 6-400.
6-294 4Q2010
Loaders
936
SEGMENTS
Base Edge 105-2345 6W-2985 6W-2988
Bolt-On Segments (7) 4T-6695 (7) 4T-6695 (2) 4T-6695
(5) 4T-6694
Bolt-On Segments — Heavy Duty (7) 132-1037 (7) 132-1037 (2) 132-1037
(5) 132-1035
Bolts (14) 1J-5607 (14) 1J-5607 (14) 1J-5607
Nuts (14) 2J-3507 (14) 2J-3507 (14) 2J-3507
4Q2010 6-295
Loaders
935/931
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
6-296 4Q2010
Loaders
935/931
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5G-1679 5G-1679 6S-4521 6S-4521 8Y-5074
Bucket Group 5G-1534 5G-4091 6S-4852 5G-4085 8Y-5075
Width — inches 71.8 71.8 84.7
mm 1823 1823 2150
Dozer Assembly 5G-1533 5G-1533 6S-4863 6S-4863 8Y-5286
Cutting Edge 5G-1523 5G-1523 6S-4738 6S-4738 8Y-5291
(Weld-On) (Weld-On) (Weld-On) (Weld-On) (Weld-On)
Bowl Assembly 5G-1382 5G-4092 6S-6505 5G-4084 8Y-5076
Base Edge 5G-2395* 5G-2808 6S-6500* 5G-2809 8Y-4738
Corners (R/L) 6S-3237/8 5G-2807/6 6S-3237/8 5G-2807/6 5G-2807/6
Adapters
Center (8) 9J-4207 (6) 9J-4207 (7) 9J-4207 (5) 9J-4207 (6) 6Y-6227
Bolts (16) 5J-4771 (12) 5J-4771 (14) 5J-4771 (10) 5J-4771 (12) 1J-6762
Nuts (16) 2J-3506 (12) 2J-3506 (14) 2J-3506 (10) 2J-3506 (12) 2J-3506
Corner (R/L) 1U-2209/8 1U-2209/8 6Y-6229/8
Bolts (2) 6F-0196 (2) 6F-0196 (2) 6F-0196
Nuts (2) 2J-3505 (2) 2J-3505 (2) 2J-3505
Tip Size† J200 J200 J200 J200 J225
Bolt-On Edges
Center Sections (2) 4T-2912 4T-2911 4T-2920 4T-8796 9W-9943
End Section (2) 4T-2910 (2) 4T-2918 (2) 4T-2914 (2) 9W-9944
Bolts (8) 4F-7827 (8) 4F-7827 (7) 4F-7827 (7) 4F-7827 (8) 4F-7827
Nuts (8) 2J-3506 (8) 2J-3506 (7) 2J-3506 (7) 2J-3506 (8) 2J-3506
Two Piece HD Bolt-On Edges
Bolts (8) 4F-7827 (7) 4F-7827
Nuts (8) 2J-3506 (7) 2J-3506
* Edge is discontinued. See “Replacement Base Edges” chart.
† Tip options found in tip option chart on page 6-400.
4Q2010 6-297
Loaders
935/931
6-298 4Q2010
Loaders
935/931
4Q2010 6-299
Loaders
935/931
SEGMENTS
Base Edge 5G-6133 8Y-4738
Bolt-On Segments (6) 128-2873 (7) 6Y-6362
Bolts (12) 4F-7827 (14) 4F-7827
Nuts (12) 2J-3506 (14) 2J-3506
6-300 4Q2010
Loaders
933
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-301
Loaders
930
6-302 4Q2010
Loaders
930
4Q2010 6-303
Loaders
930
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V-4655 9K-6717
Bucket Group 5V-4653 9K-6721
Width — inches 95.3 96.0
mm 2419 2438
Dozer Assembly 9K-7656 9K-7656
Cutting Edge 4T-8077 9K-5705**
Bolts (15) 4F-3654 (15) 4F-3654
Nuts (15) 1D-4720 (15) 1D-4720
Bowl Assembly 5V-4652 9K-6729
Base Edge 6W-2984 8K-8161**
Corners (R/L) 4V-1544/5 8K-6455/6
Adapters
Center (6) 1U-0257 (9) 1U-0257
Bolts (12) 8J-2928 (18) 8J-2928
Nuts (12) 8J-2933 (18) 8J-2933
Corners (R/L) (One-Bolt) 3G-4259/8
Bolts (2) 4J-9058
Nuts (2) 8J-2933
Corners (R/L) (Two-Bolt) a 6I-9251/0
Bolts (2) 4F-4042
(2) 4J-9058
Nuts (4) 2J-3507
Tip Size† J250 J250
Bolt-On Segments
Standard (5) 4T-6694
(2) 4T-6693
Heavy Duty
Bolts (14) 4F-4042
Nuts (14) 2J-3507
Bolt-On Edges
Standard
Center Sections (2) 1U-0607 1U-1465
End Bits (2) 4T-8091 (2) 1U-1464
(2) 1U-1896*
Abrasion Resistant (ARM)
Bolts (10) 1J-5607 (9) 1J-5607
Nuts (10) 2J-3507 (9) 2J-3507
Corner Protectors (R/L) a 253-0060/1 253-0060/1
Bolts (4) 4F-4042 (4) 4F-4042
Nuts (4) 2J-3507 (4) 2J-3507
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 6I-8310/1 bucket corners.
† Tip options found in tip option chart on page 6-400.
6-304 4Q2010
Loaders
930
4Q2010 6-305
Loaders
930
WOODCHIP BUCKETS
Model 930G, H 930G, H
Bucket Group 314-3193 167-0121
Bucket Assembly 314-3232
Edge Type Straight Straight
Width — inches 129 133
mm 3276 3389
Rated Capacity — yd3 6.5 6.5
m3 5.0 5.0
Base Edge 151-1998 135-9739
Bolt-On Edges
Center (4) 1U-1464
End Bits
Bolt (12) 4F-4042
Nut (12) 2J-3507
Corner Protectors (R/L) 6I-8311/10 6I-8311/10
Sidebar Plate (R/L) (2) 325-0622
6-306 4Q2010
Loaders
930
SEGMENTS
Base Edge 6W-2984 4E-0659
Bolt-On Segments — Center (5) 4T-6694 (7) 8E-4569
RH & LH (2) 4T-6693
Bolt-On Segments — Heavy Duty
Center (5) 132-1035
RH & LH (2) 132-1036
Bolts (14) 4F-4042 (14) 1J-5607
Nuts (14) 2J-3507 (14) 2J-3507
Half Arrow
RH (1) 314-5651
LH (1) 314-5652
Center (2) 314-5653
Top Cover
RH (1) 314-5654
LH (1) 314-5655
Center (1) 314-5656
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
Half Arrow
RH — ARM (1) 337-5699
LH — ARM (1) 337-5700
Center — ARM (2) 337-5701
Top Cover
RH — ARM (1) 337-5702
LH — ARM (1) 337-5703
Center — ARM (1) 337-5704
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
4Q2010 6-307
Loaders
930
6-308 4Q2010
Loaders
928
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-309
Loaders
928
6-310 4Q2010
Loaders
928
WOODCHIP BUCKETS
928G, H 928G, H
Bucket Group 314-3194 136-0849
Bucket Assembly 314-3233
Edge Type Straight Straight
Width — inches 129 129
mm 3276 3276
Rated Capacity — yd3 6.75 2.5
m3 5.16 1.9
Base Edge 7V-0912
Bolt-On Edges
Center (2) 1U-0593 (2) 1U-0593
End Bits (2) 3G-6395 (2) 3G-6395
Bolts (12) 5P-8823 (12) 5P-8823
Nuts (12) 3K-9770 (12) 3K-9770
Corner Protectors (R/L) 8K-6455/6
Rear Wear Plates (2) 170-1248
Bottom Wear Plates 326-8098
Sidebar Plate (R/L) (2) 314-9047
WASTE BUCKETS
928G, H 928G, H
Bucket Group 314-3179 314-3198
Bucket Assembly 314-3248 314-3241
Edge Type Straight Straight
Width — inches 129 129
mm 3276 3276
Rated Capacity — yd3 4.5 4.25
m3 3.45 3.25
Base Edge 105-2345 4E-0659
Bolt-On Edges
Center (2) 107-3746 (2) 8E-4567
End Bits (2) 4T-8091 (2) 4T-8091
Bolts (10) 1J-5607 (10) 1J-5607
Nuts (10) 2J-3507 (10) 2J-3507
Corner Protectors (R/L) 6I-8311/10 6I-8311/10
Rear Wear Plates (4) 9V-4484 (4) 9V-4484
Bottom Wear Plates 328-7066 328-7140
Sidebar Plate (R/L) (2) 318-1461 (2) 318-1461
MULTI-PURPOSE BUCKETS
928G, H 928G, H
Bucket Group 313-3195 140-1790
Bucket Assembly 151-1984
Edge Type Straight Straight
Width — inches 103 107
mm 2606 2606
Rated Capacity — yd3 2.5
m3 1.9
Bolt-On Edges
Center (2) 8E-4567
End Bits (2) 4T-8091
Bolts (10) 1J-5607
Nuts (10) 2J-3507
4Q2010 6-311
Loaders
928
MISCELLANEOUS BUCKETS
Model 928H 928H 928G 928G 928G
Bucket Group 231-1498 152-1613 107-5755 117-1785 139-0275
Bucket Assembly 223-9730 152-1612 106-9814
Width — inches 99 100
mm 2524 2550
Rated Capacity — yd3 3.0 2.9 2.6 2.6
m3 2.3 2.2 2.0 2.0
Base Edge 4E-0659 143-4353 105-8798 110-4781
Center Adapters (6) 1U-0257 (8) 1U-1254
Corner Adapters (R/L) 6I-9251/0
Number of Teeth 8 8
Tip Size J250 J250
Bolt-On Edges
Center (2) 8E-4567 (5) 8E-4569 (2) 8E-4567
End Bits (2) 4T-8091 (2) 4T-6694 (2) 4T-8091
Bolts (10) 1J-5607 (14) 1J-5607 (10) 1J-5607
Nuts (10) 2J-3507 (14) 2J-3507 (10) 2J-3507
Corner Protectors (R/L) 6I-8311/10
Sidebar Plate (R/L) 152-8163/4
6-312 4Q2010
Loaders
928
PENETRATION BUCKETS
Model 928F 928G
Bucket Assembly 4E-90 171-8138
Edge Type FMT FMT
Width — inches 102.1 102.1
mm 2593 2593
Base Edge 4E-2483 4E-2483
Corners (R/L) 4E-3128/7 (2) 4V-8285
Center Adapter (8) 1U-1254 (8) 1U-1254
Tip Size† J250 J250
† Tip options found in tip option chart on page 6-400.
4Q2010 6-313
Loaders
928
SEGMENTS
Base Edge 4E-0659
Bolt-On Segments — Center (7) 8E-4569
Bolt-On Segments — Heavy Duty
Center
Bolts (14) 1J-5607
Nuts (14) 2J-3507
Half Arrow
RH (1) 314-5651
LH (1) 314-5652
Center (2) 314-5653
Top Cover
RH (1) 314-5654
LH (1) 314-5655
Center (1) 314-5656
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
Half Arrow
RH — ARM (1) 337-5699
LH — ARM (1) 337-5700
Center — ARM (2) 337-5701
Top Cover
RH — ARM (1) 337-5702
LH — ARM (1) 337-5703
Center — ARM (1) 337-5704
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
6-314 4Q2010
Loaders
926
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-315
Loaders
926
PENETRATION BUCKETS
Bucket Assembly 9C-4905 4E-0090
9V-9756
Width — inches 95.9 102.1
mm 2437 2593
Base Edge Assembly 9V-9755 4E-2482
Base Edge N/A 4E-2483
Corners (R/L) 4E-3128/7
Adapters
Center (8) 1U-1254 (8) 1U-1254 Weld-On Flushmount
Tip Size† J250 J250
† Tip options found in tip option chart on page 6-400.
6-316 4Q2010
Loaders
926
4Q2010 6-317
Loaders
926
6-318 4Q2010
Loaders
924F / G / GZ / H / HZ
4Q2010 6-319
Loaders
924F / G / GZ / H / HZ
6-320 4Q2010
Loaders
924F / G / GZ / H / HZ
PENETRATION BUCKETS
Model 924H 924H 924H
Bucket Group 199-5212 198-8556 167-3967
Bucket Assembly 199-6151 198-8557 145-5167
Rated Capacity — yd3 2.2 2.2 2.2
m3 1.7 1.7 1.7
Base Edge Assembly 4E-2482
Base Edge 4E-0659 4E-0659 4E-2483
Center Adapters (8) 1U-1254
Number of Teeth 8
Tip Size† J250
† Tip options found in tip option chart on page 6-400.
4Q2010 6-321
Loaders
924F / G / GZ / H / HZ
ROCK BUCKET
Model 924H
Bucket Group 301-0435
Rated Capacity — yd3 2.5
m3 1.9
Bolt-On Edges
Center 8Y-6263
End Bits
Corner Protectors (R/L) 8E-5310/11
Rear Wear Plates (4) 302-6836
Bottom Wear Plates (2) 220-3385
Sidebar Plate (2) 302-6399
6-322 4Q2010
Loaders
924F / G / GZ / H / HZ
WOODCHIP BUCKETS
Model 924GZ/924HZ 924G/924H 924G/924H 924GZ/924HZ
Bucket Group 314-3195 314-3193 167-0121 208-1222
Bucket Assembly 314-3234 314-3232 208-1223
Edge Type Straight Straight Straight Straight
Width — inches 129 129 133 134
mm 3276 3276 3389 3407
Rated Capacity — yd3 6.5 6.5 6.5 6.5
m3 5.0 5.0 5.0 5.0
Base Edge 151-1998 135-9739 135-9739
Bolt-On Edges
Center (2) 1U-0593 (4) 1U-1464 1U-0605
(2) 8E-4567
End Bits (2) 3G-6395 (2) 4T-8091
Bolts (12) 5P-8823 (12) 4F-4042 (13) 1J-5607
Nuts (12) 3K-9770 (12) 2J-3507 (13) 2J-3507
Corner Protectors (R/L) 6I-8311/10 6I-8311/10 6I-8311/10
Sidebar Plate (R/L) (2) 325-0622
WASTE BUCKETS
Model 924GZ/924HZ 924G/924H
Bucket Group 314-3199 314-3197
Bucket Assembly 314-3240
Edge Type Straight Straight
Width — inches 129 129
mm 3276 3276
Rated Capacity — yd3 4.5
m3 3.45
Base Edge 105-2345
Bolt-On Edges
Center (2) 107-3746
End Bits (2) 4T-8091
Bolts (10) 1J-5607
Nuts (10) 2J-3507
Corner Protectors (R/L) 6I-8311/10
Sidebar Plate (R/L) (2) 318-1461
4Q2010 6-323
Loaders
924F / G / GZ / H / HZ
GRAPPLE BUCKET
Model 924GZ/924HZ
Bucket Group 315-6097
Bucket Assembly 322-9272
Edge Type Straight
Width — inches 106
mm 2692
Rated Capacity — yd3 3
m3 2.29
Base Edge 105-2345
Number of Teeth 8
Tip Size† J250
Corner Protectors (R/L) 6I-8311/10
Rear Wear Plates (2) 216-4320
† Tip options found in tip option chart on page 6-400.
MULTI-PURPOSE BUCKETS
Model 924GZ/924HZ 924G/924H 924G/924H 924G/924H
Bucket Group 189-2481 183-4735 284-5374 315-6741
Bucket Assembly 189-2486 183-5583 315-6740
Edge Type Straight Straight Straight Straight
Width — inches 103 103 108 122.2
mm 2610 2610 2750 3105
Rated Capacity — yd3 2.0 2.35 2.5
m3 1.53 1.8 1.91
Base Edge 180-6418 105-2345
Bolt-On Edges
Center 4T-8374 4T-8374 (3) 140-0983 (2) 107-3746
End Bits (2) 4T-8091
Bolts (16) 5J-4773 (18) 4F-7827 (10) 1J-5607
Nuts (16) 2J-3506 (18) 2J-3506 (10) 2J-3507
Corner Protectors (R/L) 8E-5302/3
MISCELLANEOUS BUCKETS
Model 924F 924F 924F
Bucket Group 109-8099 7Q-8357 112-7320
Base Edge 6W-2985
Bolt-On Edges
Center (2) 1U-0292
End Bits (2) 4T-8091
Bolts (10) 1J-5607
Nuts (10) 2J-3507
Corner Protectors (R/L) 4V-1544/5
6-324 4Q2010
Loaders
924F / G / GZ / H / HZ
SEGMENTS
Base Edge 4E-0659 9V-6572
Bolt-On Segments — Center (7) 8E-4569 (7) 4T-6694
Bolt-On Segments — Heavy Duty
Center (7) 132-1035
Bolts (14) 1J-5607 (14) 1J-5607
Nuts (14) 2J-3507 (14) 2J-3507
Half Arrow
RH (1) 314-5651
LH (1) 314-5652
Center (2) 314-5653
Top Cover
RH (1) 314-5654
LH (1) 314-5655
Center (1) 314-5656
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
Half Arrow
RH — ARM (1) 337-5699
LH — ARM (1) 337-5700
Center — ARM (2) 337-5701
Top Cover
RH — ARM (1) 337-5702
LH — ARM (1) 337-5703
Center — ARM (1) 337-5704
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
4Q2010 6-325
Loaders
924F / G / GZ / H / HZ
6-326 4Q2010
Loaders
920
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
4Q2010 6-327
Loaders
920
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V-4659 9K-5692
Bucket Group 5V-4654 9K-6159
Width — inches 95.3 96.0
mm 2419 2438
Dozer Assembly 9K-9508 9K-9508
Cutting Edge 4T-8077 4T-8077
Bolts (15) 4F-3654 (15) 4F-3654
Nuts (15) 1D-4720 (15) 1D-4720
Bowl Assembly 5V-4658 9K-6161
Base Edge 6W-2984 8K-8161**
Corners (R/L) 4V-1544/5 8K-6455/6
Adapters
Center (6) 1U-0257 (9) 1U-0257
Bolts (12) 8J-2928 (18) 8J-2928
Nuts (12) 8J-2933 (18) 8J-2933
Corners (R/L) (One-Bolt) 3G-4259/8
Bolts (2) 4J-9058
Nuts (2) 8J-2933
Corners (R/L) (Two-Bolt) a 6I-9251/0
Bolts (2) 4F-4042
(2) 4J-9058
Nuts (4) 2J-3507
Tip Size† J250 J250
Bolt-On Segments
Standard (5) 4T-6694
(2) 4T-6693
Heavy Duty (5) 132-1035
(2) 132-1036
Bolts (14) 4F-4042
Nuts (14) 2J-3507
Bolt-On Edges
Standard
Center Sections (2) 1U-0607 1U-1465
End Bits (2) 4T-8091 (2) 1U-1464
(2) 1U-1896*
Heavy Duty
Center Sections 132-1026
End Sections (2) 132-1027
Abrasion Resistant (ARM)
Center Sections (2) 9W-3483 9W-3469
End Bits 9W-3481/2 9W-3470/1
Bolts (10) 1J-5607 (9) 1J-5607
Nuts (10) 2J-3507 (9) 2J-3507
Corner Protectors (R/L) 253-0060/1 253-0060/1
Bolts (4) 4F-4042 (4) 4F-4042
Nuts (4) 2J-3507 (4) 2J-3507
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 6I-8310/1 bucket corners.
† Tip options found in tip option chart on page 6-400.
6-328 4Q2010
Loaders
920
SEGMENTS
Base Edge 6W-2984
Bolt-On Segments — Center (5) 4T-6694
RH & LH (2) 4T-6693
Bolt-On Segments — Heavy Duty
Center (5) 132-1035
RH & LH (2) 132-1036
Bolts (14) 4F-4042
Nuts (14) 2J-3507
4Q2010 6-329
Loaders
920
6-330 4Q2010
Loaders
918F
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKET
Bucket Assembly 4E-1724
Width — inches 95.9
mm 2436
Base Edge Assembly 9V-9755
Base Edge N/A
Adapters
Flushmount, Weld-On (8) 1U-1254
Tip Size† J250
† Tip options found in tip option chart on page 6-400.
4Q2010 6-331
Loaders
916
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKET
Bucket Assembly 9C-4941
9V-9795
Width — inches 95.9
mm 2437
Base Edge Assembly 9V-9755
Base Edge N/A
Adapters
Flushmount, Weld-On (8) 1U-1254
Tip Size† J250
† Tip options found in tip option chart on page 6-400.
6-332 4Q2010
Loaders
916
4Q2010 6-333
Loaders
914
PENETRATION BUCKETS
Model 914G 914G 914G 914G
Bucket Group 112-1258 128-1481
Bucket Assembly 171-8130 171-8140 171-8130 171-8140
Width — inches 95.8
mm 2434 2454
Rated Capacity — yd3 1.7 1.83
m3 1.3 1.4
Base Edge Assembly 5G-8911 128-1489 5G-8911
Base Edge 5G-8912 5G-8912 128-1489
Adapters
Center 4T-1204 1U-1254
Flushmount, Weld-On (8) 4T-1204 (8) 1U-1254
Number of Teeth 8 8
Tip Size† J200 J250 J200 J250
† Tip options found in tip option chart on page 6-400.
6-334 4Q2010
Loaders
914
MULTI-PURPOSE BUCKETS
Model 914G 914G
Bucket Group 126-4994 126-6715
Rated Capacity — yd3 1.43 1.43
m3 1.1 1.1
Bolt-On Edges
Center 142-6822
COAL BUCKET
Model 914G
Bucket Group 126-3348
Rated Capacity — yd3 3.14
m3 2.4
WOODCHIP BUCKETS
Model 914G 914G
Bucket Group 127-1801 127-1802
Bolt-On Edges
Center 142-6103 142-6103
Bolts (9) 1J-5607 (9) 1J-5607
Nuts (9) 2J-3507 (9) 2J-3507
Corner Protectors (R/L) 8K-6455/6 8K-6455/6
4Q2010 6-335
Loaders
914
MISCELLANEOUS BUCKETS
Model 914G 914G
Bucket Group 125-9294 125-9299
6-336 4Q2010
Loaders
910
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKET
Model 910E, F
Bucket Assembly 7I-3194
Width — inches 95.8
mm 2434
Base Edge Assembly a 5G-8911
Base Edge 5G-8912
Adapters
Flushmount, Weld-On (8) 4T-1204
Tip Size† J200
a Consists of edge and weld-on adapters.
† Tip options found in tip option chart on page 6-400.
4Q2010 6-337
Loaders
910
MULTI-PURPOSE BUCKETS
Model 910 910 910F 910F
Bucket Arrangement 6S-4521 6S-4521
Bucket Group 5G-4085 6S-4852 126-6377 146-9549
Width — inches 82.6 84.7
mm 2098 2152
Dozer Assembly 6S-4863 6S-4863
Cutting Edge 6S-4738 6S-4738
Weld-On Weld-On
Bowl Assembly 5G-4084 6S-6505
Base Edge 5G-2809 6S-6500*
Corners (R/L) 5G-2807/6 6S-3237/8
Base Edge 4Y-5397 4Y-5397
Adapters
Center (5) 9J-4207 (7) 9J-4207
Bolts (10) 5J-4771 (14) 5J-4771
Nuts (10) 2J-3506 (14) 2J-3506
Corner (R/L) 1U-2209/8
Bolts (2) 6F-0196
Nuts (2) 2J-3505
Number of Teeth 8
Tip Size† J200 J200
Bolt-On Edges
Center 4T-8796 4T-2920 9W-8620
End Sections (2) 4T-2914 (2) 4T-2918 (2) 4T-2914
Bolts (7) 4F-7827 (7) 4F-7827 (8) 4F-7827
Nuts (7) 2J-3506 (7) 2J-3506 (8) 2J-3506
* Edge is discontinued. See “Replacement Base Edges” chart.
† Tip options found in tip option chart on page 6-400.
MISCELLANEOUS BUCKETS
Model 910F 910F 910F 910F 910H
Bucket Group 150-6932 163-3805 172-6609 360-7042
Bucket Assembly 169-6630 163-4203 144-5943 172-6610 305-8397
Width — inches 89
mm 2264
Rated Capacity — yd3 1.7
m3 1.3
Base Edge 144-5944 206-2366
Bolt-On Edges
Center 9W-8694 (2) 172-8084
End Bits (2) 4T-2914
Bolts (7) 4F-7827 (6) 4F-7827
Nuts (7) 2J-3506 (6) 2J-3506
6-338 4Q2010
Loaders
910
4Q2010 6-339
Loaders
908 / 908H / 907H / 906 / 906H / 904B / 903B / 902 / 902B / 901B
6-340 4Q2010
Loaders
908 / 908H / 907H / 906 / 906H / 904B / 903B / 902 / 902B / 901B
4Q2010 6-341
Loaders
908 / 908H / 907H / 906 / 906H / 904B / 903B / 902 / 902B / 901B
MULTI-PURPOSE BUCKETS
Model 908 908 908 908H 908H
Bucket Group 150-1362 150-6281 286-0587 286-0588
with Bolt-On Teeth 150-8391
with Bolt-On Edge 150-8392
Bucket Assembly 138-8916 150-1359 150-6282 259-6051 259-6051
Width — inches 81.0 81.0
mm 2050 2060
Rated Capacity — yd3 1.2 1.2 1.2 1.2 1.2
m3 0.31 0.9 0.9 0.9 0.9
Dozer Assembly 148-8880
Clam Assembly 148-8881
Corners (L/R) 9R-5205/6
Base Edge Assembly 147-1041
Base Edge 147-1040 147-1042 147-1040 147-1040
Adapters
Center 135-8200
Number of Teeth 7 7
Tip Size† J200
Bolt-On Uniteeth (7) 132-4720
Bolts (14) 159-2953
Nuts (14) 8T-4778
Bolt-On Edge 132-4725
Bolts (13) 159-2953
Nuts (13) 8T-4778 (13) 8T-4778 (13) 8T-4778 (13) 8T-4778
Center 132-4725 132-4725 132-4725
Flat Head Screws (13) 159-2953 (13) 159-2953 (13) 159-2953
Cutting Edge (clam) 132-4728 259-6037
Corner Protectors (R/L) 150-6272/3
† Tip options found in tip option chart on page 6-400.
6-342 4Q2010
Loaders
908 / 908H / 907H / 906 / 906H / 904B / 903B / 902 / 902B / 901B
4Q2010 6-343
Loaders
908 / 908H / 907H / 906 / 906H / 904B / 903B / 902 / 902B / 901B
6-344 4Q2010
Loaders
908 / 908H / 907H / 906 / 906H / 904B / 903B / 902 / 902B / 901B
GRAPPLE BUCKETS
Model 904B 904B 904B 904B 904B
Bucket Group 157-7223 157-7226 157-7224 157-7225 217-6229
Bucket Assembly 156-0887 156-0887 156-0888 156-0889 217-6226
Width — inches 60.0 60.0 66.0 72.0 78.0
mm 1524 1524 1676 1829 1981
Bolt-On Edges
Center 149-5435 149-5435 149-5436 149-5437 199-7722
Nuts (8) 8T-4778 (8) 8T-4778 (11) 8T-4778 (11) 8T-4778
Flat Head Screws (8) 159-2953 (8) 159-2953 (11) 159-2953 (11) 159-2953
Cutting Edge (clam) 135-9394 135-9395 135-9396 135-9397
4Q2010 6-345
Loaders
908 / 908H / 907H / 906 / 906H / 904B / 903B / 902 / 902B / 901B
JAW BUCKETS
Model 903B 903B 902B 902B 902B
Bucket Group 227-2868 227-2876 227-2865 227-2867 227-2873
Bucket Assembly
Width — inches 71.0 71.0 71.0 71.0 71.0
mm 1808 1808 1808 1808 1808
Bucket Type farm farm farm quick
Rated Capacity — yd3 1.2 1.2 1.0 1.0 1.0
m3 0.9 0.9 0.8 0.8 0.8
Base Edge 238-7904 238-7904 238-7904 238-7904 238-7904
MISCELLANEOUS BUCKETS
Model 902B 902B 902B
Bucket Group 323-6588 227-2862 269-6358
Bucket Assembly 227-2871
Width — inches 65.0 65.0 65.0
mm 1648 1648 1648
Bucket Type quick
Rated Capacity — yd3 0.8 0.7
m3 0.6 0.5
Base Edge 230-5315 230-5315 230-5315
6-346 4Q2010
Loaders
IT62 / IT38 / IT38G / IT38H / IT28 / IT28F / IT26 / IT24F / IT14 / IT12 / IT12F
4Q2010 6-347
Loaders
IT62 / IT38 / IT38G / IT38H / IT28 / IT28F / IT26 / IT24F / IT14 / IT12 / IT12F
6-348 4Q2010
Loaders
IT62 / IT38 / IT38G / IT38H / IT28 / IT28F / IT26 / IT24F / IT14 / IT12 / IT12F
MISCELLANEOUS BUCKETS
Model IT28F IT24F IT24F IT12F IT12F
Bucket Group 7Q-8367 109-8408 3Q-7222 109-8348 163-1500
Bucket Assembly 163-1026
Center Adapters (5) 9J-4207
Corner Adapters (R/L) 1U-2209/8
Number of Teeth 7
Tip Size† J200
Bolt-On Edges
Center 5G-2809
† Tip options found in tip option chart on page 6-400.
4Q2010 6-349
Loaders
IT62 / IT38 / IT38G / IT38H / IT28 / IT28F / IT26 / IT24F / IT14 / IT12 / IT12F
6-350 4Q2010
Loaders
IT62 / IT38 / IT38G / IT38H / IT28 / IT28F / IT26 / IT24F / IT14 / IT12 / IT12F
SEGMENTS
Base Edge 105-2345 5G-8763 5G-6133 9V-6572
Bolt-On Segments — Center (7) 4T-6695 (2) 128-2873 (6) 128-2873 (7) 4T-6694
RH & LH (4) 128-2872
Bolt-On Segments — Heavy Duty
Center (7) 132-1037 (7) 132-1037 (7) 132-1035
Bolts (14) 1J-5607 (12) 4F-7827 (12) 4F-7827 (14) 1J-5607
Nuts (14) 2J-3507 (12) 2J-3506 (12) 2J-3506 (14) 2J-3507
SEGMENTS — Continued
Base Edge 4E-0659 5G-8342 141-4847 141-4847(+)
Bolt-On Segments — Center (7) 8E-4569 (7) 128-2873
Bolt-On Segments — Heavy Duty
Center (7) 132-4715 (5) 132-4715
RH & LH (2) 257-1762
Bolts (14) 1J-5607 (14) 4F-7827 (14) 4F-4042 (14) 4F-4042
Nuts (14) 2J-3507 (14) 2J-3506 (14) 2J-3507 (14) 2J-3507
Half Arrow
RH (1) 314-5651
LH (1) 314-5652
Center (2) 314-5653
Top Cover
RH (1) 314-5654
LH (1) 314-5655
Center (1) 314-5656
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
Half Arrow
RH — ARM (1) 337-5699
LH — ARM (1) 337-5700
Center — ARM (2) 337-5701
Top Cover
RH — ARM (1) 337-5702
LH — ARM (1) 337-5703
Center — ARM (1) 337-5704
Plow Bolts (14) 4J-9208
Nuts (14) 2J-3507
(+) K Series only
4Q2010 6-351
Loaders
IT62 / IT38 / IT38G / IT38H / IT28 / IT28F / IT26 / IT24F / IT14 / IT12 / IT12F
6-352 4Q2010
Loaders
IT62 / IT38 / IT38G / IT38H / IT28 / IT28F / IT26 / IT24F / IT14 / IT12 / IT12F
4Q2010 6-353
Loaders
IT14G
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKETS
Model IT14G IT14G IT14G IT14G
Bucket Group 134-5459 128-1482 112-3122
Bucket Assembly 171-8133 171-8141 134-5460 171-8141 171-8133
171-8135
Width — inches 95.8 96.6 94.5 96.6
mm 2434 2454 2401 2454
Rated Capacity — yd3 1.8 1.8 1.7
m3 1.4 1.4 1.3
Edge Assembly 5G-8911 5G-8911
Base Edge 5G-8912 128-1489 5G-8342 128-1489 5G-8912
Adapters
Flushmount, Weld-On (8) 4T-1204 (8) 1U-1254
Center (8) 1U-1254 (8) 4T-1204
Number of Teeth 8 8
Tip Size† J200 J250 J250 J200
Bolt-On Edges
Center 9W-8620
End Bits (2) 4T-2914
Bolts (8) 4F-7827
Nuts (8) 2J-3506
† Tip options found in tip option chart on page 6-400.
MISCELLANEOUS BUCKET
Model IT14G
Bucket Group 3Q-7222
6-354 4Q2010
Loaders
IT62G II
4Q2010 6-355
Loaders
994F
994D, 994B, 994
993K
992K
992G, 992G H/L
992D, 992C
992D H/L, 992D E/L, 992C H/L
992B, 992
990H, 990 II, 990
988H, 988G
988F II, 988F, 988F H/L, 988B
988B H/L
988
980H, 980G II, 980G (serial # 2KR4553-UP)
980G (serial # 2KR1-2KR4552)†, 980G H/L†
980F H/L†, 980C H/L†
980F, 980C
980B, 980
972H, 972G II, 972G, 966G
970F (serial # 7SK641-UP)
970F (serial # 7SK1-7SK640), 966F II, 966F, 966E, 966D
966H, 966G II, 966G, 972G
966C, 966B, 966
962G II, 962G, 950G
960F, 950F II, 950F, 950E, 950B
950H, 950G II, 950G, 962G
950F II, 950F, 950E, 950B, 960F
950, 944
938G (serial #s 4YS519-UP, 9HS190-UP, 6WS683-UP)
938G, 938F, 936F, 936E, 936
930
928G
928F, 926E, 926
924F, 918F, 916, 916E
922B, 922
920
914G, 910F, 910E Keep original bucket pins with original bucket when interchanging buckets between 914G and 910F machines
910
908
906, 902
IT62G, IT38G, IT38F, 936 Custom Tool Carrier
All IT28, IT24, IT18, IT14 and IT12 (A, B, C, F and G) models, will interchange.
† Because of retention differences, keep original bucket pins with original machine when interchanging buckets between 980F & C H/L and
980G machines. 980G Rock buckets will pin-on to a 980F H/L (lower pin bores are the same). The 980G buckets are wider for increased
tire coverage which will result in excessive capacity for most applications and will reduce penetration.
6-356 4Q2010
Loaders
4Q2010 6-357
Loaders
446
6-358 4Q2010
Loaders
446
4Q2010 6-359
Loaders
444E / 442E / 434E / 432E / 430E / 428E / 422E / 420E / 416E
6-360 4Q2010
Loaders
444E / 442E / 434E / 432E / 430E / 428E / 422E / 420E / 416E
4Q2010 6-361
Loaders
444E / 442E / 434E / 432E / 430E / 428E / 422E / 420E / 416E
6-362 4Q2010
Loaders
444E / 442E / 434E / 432E / 430E / 428E / 422E / 420E / 416E
4Q2010 6-363
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
6-364 4Q2010
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
4Q2010 6-365
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
6-366 4Q2010
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
4Q2010 6-367
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
6-368 4Q2010
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
4Q2010 6-369
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
6-370 4Q2010
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
4Q2010 6-371
Loaders
442D / 438D / 432D / 430D / 428D / 424D / 420D / 416D
6-372 4Q2010
Loaders
438 / 436 / 428 / 426 / 416
4Q2010 6-373
Loaders
438 / 436 / 428 / 426 / 416
6-374 4Q2010
Loaders
438 / 436 / 428 / 426 / 416
4Q2010 6-375
Loaders
438 / 436 / 428 / 426 / 416
6-376 4Q2010
Loaders
438 / 436 / 428 / 426 / 416
4Q2010 6-377
Loaders
438 / 436 / 428 / 426 / 416
6-378 4Q2010
Loaders
416, 416B, 416C, 426, 426B, 426C, 428, 428B, 436, 436B, 436C
(When fitting 12 in wide bucket, use 9R0437 pin, 9R0438 pin, (2) 6V3213 snap rings, (2) 6V4364 snap rings,
(2) 9R0158 washers, and (2) 9R1510 washers.)
416D, 420D, 430D
(When fitting 12 in wide bucket, use 168-0443 pin, 168-0444 pin, (2) 6V3213 snap rings, (2) 6V4364 snap rings,
(2) 9R0158 washers, and (2) 9R1510 washers.)
446, 446B, 446D
4Q2010 6-379
Loaders
6-380 4Q2010
Loaders
4Q2010 6-381
Loaders
ADAPTERS
Two-Strap Bolt-On
Features Benefits
✔ Countersunk bottom to accept plow bolts. ✔ Keeps bolts from loosening or shearing.
✔ Side-pinned at point of greatest strength. ✔ Minimizes tip loss and breakage.
Better accessibility for quick changing.
✔ Adapter and tip are positioned below cutting edge. ✔ Easy digging.
✔ Two-strap design. ✔ Long cutting edge life.
Two-Strap Weld-On
Features Benefits
✔ Welded on both sides of base edge. ✔ Excellent adapter retention.
✔ Side-pinned design. ✔ Minimizes tip loss due to wear or adapter
breakage.
✔ Tip positioned below bottom of cutting edge. ✔ Excellent productivity.
✔ Two-strap design. ✔ Good edge protection.
Flushmounted Weld-on
Features Benefits
✔ Versatile. ✔ Number of teeth that can be welded to the cutting
edge is not restricted.
✔ Adaptable to other than Cat buckets.
✔ Provides flat bucket bottom. ✔ Easy cleanup.
6-382 4Q2010
Loaders
ADAPTERS — Continued
Features Benefits
✔ No top strap. ✔ Easy loading and dumping because there is no tip
or adapter on top of the cutting edge to obstruct
material flow.
✔ Tip and adapter are positioned below the bucket ✔ Easy digging.
cutting edge.
✔ Thick bottom strap. ✔ Provides excellent cutting edge protection.
✔ Versatile. ✔ Number of teeth that can be welded to the cutting
edge is not restricted.
✔ May be installed in corners of bucket with out
extensive modifications.
✔ Is adaptable to many other than Cat buckets.
4Q2010 6-383
Loaders
6-384 4Q2010
Loaders
4Q2010 6-385
Loaders
6-386 4Q2010
Loaders
4Q2010 6-387
Loaders
6-388 4Q2010
Loaders
B
C A B A B A
D D
“TWO WAY”
Edge
Thickness Bolt Hole Locations
D A B C Bolt Diameter
inch mm Part No. inch mm inch mm inch mm inch mm Type Short Tip Model
2.00 51 6K-3073 6.44 159 2.50 64 5.25 133 1.00 25 1 6K-2765 992
1.50 38 6K-1964 5.00 127 5.25 133 1.00 25 2 5K-2926 980
1.50 38 6K-7850 5.00 127 5.25 133 1.00 25 2 5K-4997 988, 983
1.25 32 6K-2962 4.50 114 2.00 51 5.50 140 0.88 22 1 5K-2926 977
1.25 32 6K-1965 4.00 102 4.25 108 0.75 19 2 5K-2925 966
1.25 32 6K-4141 3.00 76 3.50 89 0.88 22 2 5K-2926 977, 966
1.25 32 5K-9024 4.12 105 5.00 127 0.88 22 2 5K-2926 977
1.00 25 6K-2563 3.25 83 3.50 89 0.62 16 2 5K-2925 951B, 950,
944, 941, 930
1.00 25 8J-2929 2.75 70 4.88 124 1.00 25 2 5K-2925 955, 951, 950
1.00 25 8J-2930 2.75 70 4.88 124 1.00 25 2 5K-2924 941, 930, 920
1.00 25 5K-6851 4.00 102 6.50 165 0.75 19 3 5K-2925 955, 951
1.00 25 6K-3960 3.00 76 3.50 89 0.75 19 2 5K-2925 955, 951,
950, 944
1.00 25 5K-8287 3.38 86 4.38 111 0.75 19 2 5K-2925 955
0.75 19 6K-3125 3.00 76 3.50 89 0.62 16 2 5K-2924 941, 933,
922, 920
* When base edge replacement is required, side-pinned adapters must be used.
C
D
B A
Type 4
D Type 6
B A
B A
Type 5
D D
Type 4 Type 7
WEDGE-TYPE
Edge
Thickness Bolt Hole Locations
D A B C Bolt Diameter
inch mm Part No. inch mm inch mm inch mm inch mm Type Short Tip Model
1.25 32 2K-4568 5.12 130 4.88 124 4.00 102 0.75 19 4 2K-4569 977
1.25 32 4K-4694 3.18 81 3.50 89 0.88 22 7 2K-4569 977
1.25 32 3K-5754 3.32 84 3.50 89 0.75 19 6 2K-4678 966
1.00 25 3K-2843 3.28 83 3.50 89 0.62 16 7 2K-4678 944
1.00 25 4K-4695 3.28 83 3.50 89 0.75 19 7 2K-4678 955
0.75 19 3K-6781 3.28 83 3.50 89 0.62 16 6 3K-6783 933, 922
0.75 19 4K-1633 4.22 107 6.50 165 0.75 19 5 2K-4678 955
0.62 16 4K-1690 4.19 106 6.50 165 0.62 16 5 2K-4678 933
* When base edge replacement is required, side-pinned adapters must be used.
4Q2010 6-389
Loaders
D
D
Type 1 Type 2
“TWO WAY”
Edge Thickness
D
inch mm Part No. Type Short Tip Model
2.25 57 6K-7851 1 6K-7852 992
2.00 51 6K-6897 1 6K-6644 988
1.75 45 6K-6949 1 5K-4997 980
1.75 45 7K-0482 1 6K-6644 983
1.50 38 6K-2853 2 5K-4997 977
WEDGE-TYPE
D Short
inch mm Adapter Tip
1.20 31 5K-5442 2K-4569
0.94 24 5K-5441 2K-4678
0.75 19 2K-4679 2K-4678
6-390 4Q2010
Loaders
4Q2010 6-391
Loaders
BUCKET TIPS
Current Cat loader bucket tips feature the side pin design. This provides
good retention and fast, simple removal and installation. All current tips
can be used on side-pinned bolt-on adapters, flushmounted, two-strap or
bottom strap weld-on adapters. Tips for 980 and larger machines are
made of DH-3 steel.
6-392 4Q2010
Loaders
BUCKET
SELECTION GUIDE
TIP
Penetration
Tips
Penetration:
• Use in densely compacted material such as clay.
Short
• Gives maximum penetration.
• Self-sharpening.
Short:
• Use in high-impact and pry-out work such as rock.
Long • Extremely strong.
Long:
• Use in most general applications where breakage is not
a problem.
* The Heavy Duty Long Life tip should be positioned pocket down on
Wear Material Penetration Impact the adapters for maximum wear life.
4Q2010 6-393
Loaders
Long
For most general applications where breakage is not a problem.
Utility
Good for most applications. Made of through hardened DH-2 steel with no weld joints;
self sharpening.
Abrasion
For use in extremely abrasive conditions. Added material for long service life.
Penetration
For highly compacted material such as clay. Self sharpening.
Sharp
Best penetration but least wear material. Use only when the need for more penetration over-
comes the need for more wear life.
Twin Sharp
Enhanced fracture capability, used in corners or when penetration is less important.
Bolt-on Unitooth
Use in general applications where breakage is not a problem. No adapter required.
6-394 4Q2010
Loaders
J800 Retrofit Tips for 994 Wheel Loader and 385 Hydraulic Excavator
The J800 Retrofit is currently available for the most popular tip styles, Heavy Duty Penetration and Heavy Duty
Abrasion. The Heavy Duty Long tip will also be offered at a later date. The features of these tip styles are
described below:
Heavy Duty Penetration tips are designed for hard to penetrate, highly abrasive materials.
These tips have heavy wear pads for longer life.
Heavy Duty Abrasion tips are designed for easy to penetrate material with high abrasion.
They have lower penetration ability, and a heavy wear pad for long life.
Long tips have a good combination of strength, wear material, and penetration.
4Q2010 6-395
Loaders
6-396 4Q2010
Loaders
Penetration
For highly compacted material such as clay. Self sharpening.
Sharp
Best penetration but least wear material. Use only when the need for more penetration over-
comes the need for more wear life.
Twin Sharp
Enhanced fracture capability, used in corners or when penetration is less important.
Chisel
Get excellent performance using this flat-bottom tip in moderate impact, high-abrasion
applications, general excavation or areas where a square trench is required for footing,
steam walls or a clean trench floor.
Wide
Increase capacity with less spillage when working in cohesive materials where penetration
is not a concern. This tip has more wear material at the front ends, which keeps corners
square.
Soil Digging
Improve productivity in hard-soil conditions or use this tip in non-abrasive, low-impact
applications. It penetrates easily using less force. To maximize productivity add down
angle adapters.
4Q2010 6-397
Loaders
K Series™ Tips
Cat K Series™ excavator bucket tips use a new vertical retention system that allows quick and easy tip changes.
Providing a new locking interface at every tip change to improve retention reliability. Lower profile improves
penetration and wear life.
Penetration Tip
• For harder-to-penetrate, moderate impact, lower abrasion.
• Very good penetration.
• Top rib, bottom cavity to stay sharp.
Spike Tip
• For maximum penetration, especially in cohesive material.
• Stays sharp for enhanced wear life.
• Top and bottom rib design.
Wide Tip
• For easy-to-penetrate trenching applications.
• Low impact.
• Smooth floor trenches.
Heavy Penetration
• Recommended for high abrasive and impact conditions, especially shot rock.
• Excellent penetration and wear material, stays sharp.
6-398 4Q2010
Loaders
Heavy Abrasion
• Recommended for high abrasive, moderate impact, easier-to-penetrate
materials.
• Excellent wear material, less penetration.
General Duty
• Recommended for general applications in moderate impact and abrasive
conditions.
• Good penetration, self-sharpening cavities.
4Q2010 6-399
Loaders
BUCKET TIP OPTIONS
The long tip is the universal tip to start with. If other properties (strength, penetration, abrasion, etc.) become
more important, find the long tip indicated with the base edge in the previous charts and locate it within the tables
below. The different tip options are listed under the long tip.
TIP OPTIONS
Size J200 J225 J250 J300 J350
Long 1U-3202 6Y-3222 1U-3252 1U-3302 1U-3352
Light Duty Long 195-9209 168-1253 168-1301 168-1351
Short 6Y-6221 1U-3251 1U-3301 1U-3351
Abrasion 4T-2203
Penetration 1U-3209 6Y-8229 9J-4259 9J-4309 9J-4359
Penetration Plus 183-5300 168-1359
Wide 109-9200 186-3010 208-5254 107-3300 107-3350
Sharp:
Long 168-1300 168-1350
Center 9W-8209 6Y-7229 9W-8259 9W-8309 9W-2359
Corner 9W-8208 6Y-7228 9W-8258 9W-8308 9W-2358
Twin Sharp 135-8208 135-8228 135-8258 135-9308 135-9357
Heavy Duty Long 8E-4222 9N-4252 9N-4302 9N-4352
Heavy Duty Long Life (ARM) 135-8252 125-8302 135-9352
Heavy Duty Abrasion 6Y-6223 9N-4253 9N-4303 9N-4353
Heavy Duty Penetration 135-9300 144-1358
Penetration Long Life (ARM) 125-8309 119-9359
Heavy Duty Pin 8E-6208** 132-4762 132-4763 132-4766 114-0358
Heavy Duty Retainer Assembly 8E-6209** 149-5733 149-5733 149-5733 114-0359
6-400 4Q2010
Loaders
RETAINERS
Description K80 K90 K100 K110 K130 K150 K170
Standard 220-9090 220-9090 220-9090 286-2110 220-9130 233-7150 232-0170
Short 309-1119 232-2139 232-2159
4Q2010 6-401
Loaders
6-402 4Q2010
Loaders
BUCKET TIP OPTIONS
The majority of the time, the second to last and the third to
last locations in the part number identify the “J” size.
Example: 9W-8551
J550v150
4Q2010 6-403
Loaders
6-404 4Q2010
Loaders
4Q2010 6-405
Loaders
6-406 4Q2010
Loaders
Base Edges
• Look for severe bottom wear or scalloping between teeth. See following
pages on measuring base edges.
• Look for cracks beside adapters and in corner welds.
• Look for cracks on top and bottom of rear weld.
• Small cracks are not critical but should be watched. If they grow, they
should be repaired.
Bolt-On Edges and Bolt-On Segments
• Check for remaining protection in front of base edge. With bolt-on
edges, pay particular attention to the amount of protection remaining at
the front corners of the base edge.
• Look at bolt heads on bottom of bucket. If any are beginning to look
square, replace that segment or bolt-on edge piece.
Adapters, Tips, Pins and Retainer
• With weld-on adapters, check for weld cracks. With bolt-on adapters,
check for loose hardware.
• Check for adapters with badly worn bottom straps. If tips are off, also
check for worn adapter noses. With bolt-on adapters, look at bolt heads
— especially rear bolts. If head is beginning to look square, replace the
adapter. With weld-on bottom-strap and two-strap adapters, there are
cavities in the bottom. When any adapter wears into this cavity, replace
all adapters with similar wear.
• Check for tips that are worn through on the bottom or cracked in the
pocket area. Replace tips with either problem.
• Do not re-use bent or badly worn pins or retainers.
• Check for missing or broken retainers by tapping lightly on each pin. If
pin moves easily, replace the retainer.
TORQUE REQUIREMENTS FOR PLOW BOLTS
Standard Measurements Metric Equivalent Measurements
Size Torque Size Torque
1/2" (0.50") 90 ± 15 ft. lbs. 13 mm 120 ± 20 N•m
5/8" (0.63") 200 ± 30 ft. lbs. 16 mm 270 ± 40 N•m
3/4" (0.75") 350 ± 45 ft. lbs. 19 mm 475 ± 60 N•m
7/8" (0.88") 550 ± 65 ft. lbs. 22 mm 750 ± 90 N•m
1" (1.00") 850 ± 110 ft. lbs. 25 mm 1,150 ± 150 N•m
1-1/4" (1.25") 1,700 ± 220 ft. lbs. 32 mm 2,300 ± 300 N•m
NOTE: Do not apply lubricant of any type to GET hardware (nut may back off prematurely).
4Q2010 6-407
Loaders
Measuring Wear on
Bucket Base Edges
A portion of each base cutting edge is designed to be a structural part of the
bucket. The basic dimensions of the structural piece are increased to provide
material that can be worn away without risking damage to the bucket itself.
Measurements of a base edge can determine how much of this protective
“wear material” remains. When that wear material is gone, the base edge
should be replaced to avoid possible damage to the structural part of the
bucket.
The following procedures describe how to measure a base edge and how to Figure 1
use these measurements to estimate when that edge should be replaced. Front View of Bucket Corner
1. Tilt the bucket back to allow easy access to the edge.
2. Determine where the thickness measurements will be made.
Bucket Corner
Buckets with No Teeth: Measure near each end of the bucket just inside
the corner welds. See Figure 1. Base Edge
Weld
Buckets with Teeth: On buckets with corner teeth, measure mid-way
between the last two teeth at each end of the bucket. On buckets without
a tooth in the corner, measure just inside the corner welds (see Figure 1)
AND midway between the last two teeth at each end of the bucket — a
total of four places.
6-408 4Q2010
Loaders
WEAR GRAPH
100
Percent of Useable Wear Material Worn Away
ht
e
re
80 Lig
at
ve
er
od
Se
60
40
20
10
0
0 10 20 30 40 50 60 70 80
Figure 3
Percent of Original Thickness Worn Away
4Q2010 6-409
Loaders
7. The number on the vertical axis tells how much “wear material” has been
worn off — or, in other words, what percent of the wear life of the edge
has already been used.
8. Estimate when the edge should be replaced. Divide the age of the base
edge (in months, service meter units, or whatever) by the Percent Worn
from step 6. This result is the approximate “age” of the base edge when
100% of its wear material will be worn away — the time it should be
replaced!
See the example below.
Example: When should the owner of a Deere 444C wheel loader replace
the base edge? The machine is eight months old, in a moderate appli-
cation, and has 890 hours on the service meter.
Step 3: Dimension “A” is 6.0" (150 mm) and the original thickness was
about 1.00" (25 mm). This machine is about the same size as a
Cat 916.
Step 4: Minimum dimension “B” was measured to be 0.64" (16 mm).
Step 5: Divide 0.64 by 1.00 (or divide 16 by 25). The result in either case
is 0.64.
Step 6: Subtract 0.64 from 1.00. (Always use 1.00 here regardless of the
base edge thickness.) The result is 0.36. On the Wear Graph,
locate 0.36 on the bottom line. Then read up to the “moderate”
line and across to 60%. This means that 60% of the wear material
has already worn away.
Step 7: When will the edge be 100% worn? Divide the current age by the
Percent Worn.
Using hours: 890 ÷ 60% = 890 ÷ 0.60 = 1483 hours
The edge should be ready for replacement at about 1483 hours.
Using months: 8 ÷ 60% = 8 ÷ 0.60 = 13.3 months.
In other words, this edge should be about worn out in another
five months.
6-410 4Q2010
Loaders
BUCKET TYPES
Penetration Bucket
Used where a smooth, level cut and moderate breakout forces are
required. This bucket has a flat floor and curved sidebars to aid
penetration. Weld-on flushmount adapters are used.
Multipurpose Bucket
Used for general purpose loading, topsoil stripping and debris
cleanup. The bowl assembly can be raised and the bucket can
be used as a dozer. When the bowl assembly is lowered, it’s a
bucket.
Rock Bucket
Designed to work principally in the mining or quarry industries
and is available in two configurations with straight or spade edges.
The straight edge has a higher breakout force and increased dump
clearance, the spade edge offers better penetration. These buckets
are offered with or without teeth, with teeth and bolt-on segments,
or with bolt-on cutting edges.
High capacity rock buckets are available for 990 and 988. They
are 6" (150 mm) wider than rock buckets to increase bucket
capacity for less dense material.
Base Edges
To match the base edge to the application, several styles of base edge are available.
For Butter Bead Base Edge Weld Preparation information, see IRM GET00-13 (PELM0972) for complete information.
6-412 4Q2010
Loaders
For Butter Bead Base Edge Weld Preparation information, see IRM GET00-13 (PELM0972) for complete information.
4Q2010 6-413
Loaders
For Butter Bead Base Edge Weld Preparation information, see IRM GET00-13 (PELM0972) for complete information.
6-414 4Q2010
Loaders
For Butter Bead Base Edge Weld Preparation information, see IRM GET00-13 (PELM0972) for complete information.
4Q2010 6-415
Loaders
For Butter Bead Base Edge Weld Preparation information, see IRM GET00-13 (PELM0972) for complete information.
6-416 4Q2010
Loaders
For Butter Bead Base Edge Weld Preparation information, see IRM GET00-13 (PELM0972) for complete information.
4Q2010 6-417
Loaders
L
*
T
T 87"
(2200 mm)
For Butter Bead Base Edge Weld Preparation information, see IRM GET00-13 (PELM0972) for complete information.
6-418 4Q2010
Loaders
4Q2010 6-419
Loaders
6-420 4Q2010
Loaders
4Q2010 6-421
Loaders
6-422 4Q2010
Loaders
4Q2010 6-423
Loaders
6-424 4Q2010
Loaders
4Q2010 6-425
Loaders
6-426 4Q2010
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
4Q2010 6-427
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
6-428 4Q2010
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
4Q2010 6-429
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
6-430 4Q2010
Loaders
BOLT-HOLE DIMENSIONS
TYPE 1
T
D C B
W
A
4Q2010 6-431
Loaders
BOLT-HOLE DIMENSIONS
TYPE 1
T
D C B
W
A
6-432 4Q2010
Loaders
BOLT-HOLE DIMENSIONS
T T
T C T
C C
A A A A
B B W+
W W+ W W B BW
B B
A A A A
L L
L L
DIMENSIONAL DATA FOR CORNER GUARD SYSTEM END BITS — Inches (mm)
Bolt Hole Location Bolt
L W W+ T End Bit Type A B C Dia.
10.38 (265) 21.88 (556) 1.96 (50) 136-8759 1 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
10.38 (265) 21.88 (556) 1.77 (45) 100-4043 1 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
10.38 (265) 21.88 (556) 1.57 (40) 1U-0761 1 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
10.38 (265) 21.88 (556) 26.38 (670) 1.57 (40) 1U-0764 2 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
8.93 (227) 20.12 (510) 1.38 (35) 106-9290 1 7.12 (180) 3.00 (75) 2.12 (53) 1.25 (32)
7.88 (200) 21.88 (556) 1.57 (40) 100-4044 1 7.99 (203) 3.00 (75) 2.12 (53) 1.25 (32)
7.88 (200) 20.12 (510) 1.38 (35) 3G-6395 1 7.12 (180) 3.00 (75) 2.12 (53) 1.25 (32)
7.88 (200) 20.12 (510) 23.62 (600) 1.38 (35) 1U-1897 2 7.12 (180) 3.00 (75) 2.12 (53) 1.25 (32)
6.75 (170) 19.50 (496) 1.38 (35) 132-1033 1 7.12 (180) 2.62 (68) 2.25 (55) 1.25 (32)
6.75 (170) 19.50 (496) 22.62 (576) 1.38 (35) 1U-1898 2 7.12 (180) 2.62 (68) 2.25 (55) 0.98 (25)
6.75 (170) 19.50 (496) 1.18 (30) 109-3571 1 7.12 (180) 2.62 (68) 2.25 (55) 1.25 (32)
6.75 (170) 19.50 (496) 1.18 (30) 4T-8101 1 7.12 (180) 2.62 (68) 2.25 (55) 0.98 (25)
[132-1033]
6.25 (160) 13.50 (342) 1.00 (25) 4T-8091 3 5.50 (140) 2.38 (62) 2.12 (53) 0.98 (25)
6.25 (160) 13.50 (342) 16.25 (412) 1.25 (30) 1U-1896 4 5.50 (140) 2.38 (62) 2.12 (53) 0.98 (25)
[ ] Heavy Duty End Bit Segments 1.4" (35 mm).
4Q2010 6-433
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
6-434 4Q2010
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
4Q2010 6-435
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
6-436 4Q2010
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
4Q2010 6-437
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
6-438 4Q2010
Loaders
BOLT-HOLE DIMENSIONS
Weld-on half-arrow edges protect the bucket structure by adding more wear T
H
material to the base edge, and they will fit other brand buckets.
The weld-on half-arrow edges can be used to customize loader buckets. For
example, they could be used as sidecutters on bucket sidebars to improve W
penetration, or welded between bucket teeth to reduce scalloping. Before B
welding half-arrow sections between bucket teeth, be sure to check for tip and
pin hole clearance. This is a concern primarily when using bottom strap
adapters.
Options
W T H B Overall Length
Part No. in. mm in. mm in. mm in. mm feet mm
134-1774 4 101 0.43 11 0.40 10 0.14 3.5 8 2438
134-1776 6 151 0.63 16 0.60 16 0.22 5.5 8 2438
8J-8141 8 203 0.75 19 0.50 13 0.16 4.0 12 3658
8J-8176 10 254 1.10 28 1.10 29 0.44 11 12 3658
6Y-2107 10 254 1.60 40 1.20 30 1.00 25 12 3658
109-2696 10 254 1.60 40 1.20 30 1.00 25 18 5486
132-1013 11.6 295 1.77 45 1.34 34 0.47 12 3.3 1000
4Q2010 6-439
Loaders
CONVERSION PROCEDURE
Outline
A) Select Appropriate GET System. (See ‘‘Bucket Conversion Options’’ flow chart, below.)
B) Determine Bucket Width and Base Edge Thickness. (See ‘‘How to Take Bucket Width Measure-
ments’’ and ‘‘Recommended Base Edge Thickness by Loader Weight.”)
C) Select Base Edge and Attachments
— GP, MP Buckets and Rock Buckets — Corner Guard System.
— GP, MP Buckets and Rock Buckets — GP edge, bolt-on and weld-on components.
— Bucket Base Edges Without Holes.
— Rock Buckets.
— MODULOK system.
D) Install System
— Corner Guard System installation.
— GP edge installation.
— Rock Bucket edge installation.
— MODULOK system installation.
E) Complete Bucket Conversion Report Form (PEEP4210).
6-440 4Q2010
Loaders
CONVERSION PROCEDURES
WIDTH
WIDTH (Inner side bar to inner side bar)
WIDTH (Outer side bar to outer side bar)
4Q2010 6-441
Loaders
NOTE: The Corner Guard System is available for all current and
many non-current Cat general purpose and multi-purpose buckets.
Competitive buckets of similar widths can also be converted to Corner
Guard System.
The corner adapter wraps around the end of the cutting edge and the
bucket corner and bolts to the bucket corner. It securely fits against a
machined pad on the corner’s front surface to resist high loads.
Tips
Tip
Choose from easily replaceable Cat long, short, abrasion, and penetration
side-pinned tips.
Edge Segments
Segments bolt between teeth to virtually eliminate base edge scalloping
and leave a clean work surface.
Larger Teeth
Tips and adapters larger than standard are available for larger machines.
Larger teeth provide more strength and longer wear life.
6-442 4Q2010
Loaders
For work in loose materials, Corner Guard System offers a four-piece bolt- Bolt-on Edge with
on cutting edge to fully protect the base edge. The four-piece bolt-on edge Straight End Bit
design includes two center edges and two corner end bits. Standard DH-2
pieces can be propellered for increased life in most applications. Abrasion
resistant bolt-on edges are not designed to be propellered.
Because the major wear is at the corners, small end bits were designed to
provide more efficient use of wear material. With independent main-
tenance of these end bits, Corner Guard System bolt-on edges can provide
a significant cost advantage over other bolt-on edge systems.
Caterpillar has a new bolt-on edge option that lasts even longer than
standard DH-2 edges. Very hard, abrasion resistant particles have been
added to protect critical wear areas. In highly abrasive applications, these
protected bolt-on edges can last more than five times longer than standard
DH-2 bolt-on edges.
4Q2010 6-443
Loaders
GP, MP BUCKETS CORNER GUARD SYSTEM
Selection
Once you have measured the bucket width OUTER SIDEBAR TO OUTER SIDEBAR and
determined base edge thickness, turn to the following charts.
1. Select an edge with length closest to, but not less than, the width of the bucket. The width of the
bucket must measure between the uncut length of the edge and its minimum cut length as
indicated on the chart. The minimum cut length is the edge length that is required to install nuts
and bolts for end bit with Cat corners.
2. The edge selected should be similar in thickness to the edge already in the bucket.
3. Choose the corners, cutting edges or adapters, tips, and hardware from columns below each
selected base edge.
Corner Guard System was designed for GP and MP buckets on small and medium loaders (910-980
size). Use rock bucket base edges, where available, for high impact applications.
NOTE: It may be possible to drill base edges to accept bolt-on components. Special Instruction,
Form SEHS8599, contains information on tools and procedures. To determine the bolt
hole locations, use the dimensional charts in this Guide, or use the bolt-on component as a
template.
Corner Guard System
Caterpillar developed the easily replaceable bolt-on Corner
Guard System to counteract wear on loader bucket corners
and edges. It includes both bolt-on corner tooth and bolt-on
cutting edge systems. With proper use, it can substantially
increase conventional base edge and corner wear life.
The Corner Guard System:
• Reduces bucket maintenance costs.
• Improves bucket performance and capacity.
• Provides greater bucket versatility than the
conventional base edge and corners.
• Is available to retrofit non-current Cat buckets
and others if their widths are similar.
6-444 4Q2010
Loaders
4Q2010 6-445
Loaders
CORNER GUARD SYSTEM
6-446 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-447
Loaders
CORNER GUARD SYSTEM
6-448 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-449
Loaders
CORNER GUARD SYSTEM
6-450 4Q2010
Loaders
CORNER GUARD SYSTEM
Bolts
Nuts
Adapters per Edge 8
Bolt-On
Center (6) 3G-3357
Bolts (12) 5P-8361
Nuts (12) 5P-8362
Corner (Two-Bolt) (R/L) 8E-5358/9
Bolts (2) 5P-8361
(2) 6V-6535
Nuts (4) 3K-9770
Corner (One-Bolt) (R/L) 3G-5358/9
Bolts (2) 5P-8361
Nuts (2) 5P-8362
Weld-On
Flushmount 1U-1357
Bottom Strap 1U-1350
Long Tip♦ 1U-3352
Unitooth
Corner (R/L) 8E-5318/9
Bolts (2) 5P-8361
(2) 6V-6535
Nuts (4) 3K-9770
Center (6) 1U-1567
Bolts (12) 5P-8361
Nuts (12) 5P-8362
* Optional angled end bit.
♦ See tip options chart.
4Q2010 6-451
Loaders
CORNER GUARD SYSTEM
6-452 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-453
Loaders
CORNER GUARD SYSTEM
6-454 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-455
Loaders
CORNER GUARD SYSTEM
6-456 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-457
Loaders
CORNER GUARD SYSTEM
6-458 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-459
Loaders
CORNER GUARD SYSTEM
6-460 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-461
Loaders
CORNER GUARD SYSTEM
6-462 4Q2010
Loaders
CORNER GUARD SYSTEM
4Q2010 6-463
Loaders
GP, MP BUCKETS — CORNER GUARD SYSTEM
Installation
1. Trim edge to fit exactly the width of the bucket.
2. Weld components in bucket maintaining an accurate alignment between the base edge and
corners. This is to insure easy installation and removal of the corner adapter.
• Special fixtures (discussed in IRM 81-17) are available to
hold the Corner Guard System edge and corners in proper
position during welding.
• To weld corners in place with a modified base edge, where
a proper welding fixture can’t be used, use the corner adapter
itself as a welding fixture to set the corner in position, then
tack the corner in place. After making sure the corner adapter
slides on and off easily, weld the corner place.
• Special Instruction Form SMHS7527 discusses welding and
installation of Corner Guard System components and the
special fixtures.
3. Buckets equipped with Corner Guard System should be
identified as such with Decal 6V-3607.
CAUTION
BUCKET DESIGNED TO ACCEPT CORNER GUARD SYS-
TEM. FOR MAXIMUM LIFE, DO NOT OPERATE BUCKET
WITHOUT PROPER CORNER GUARD SYSTEM COMPO-
NENTS. SEE YOUR DEALER FOR ADAPTABILITY OF
TEETH OR BOLT ON EDGES.
6V-3607
You may be unable to find a Corner Guard System edge to fit a given bucket. It is possible to convert
a bucket to Corner Guard System even if the width doesn’t fall between the minimum cut length and
the original length for the edges listed on pages 6-444 through 6-461. However, because of the loca-
tion of the end bit bolt holes, you will not be able to use the special welding fixtures and you may not
be able to use bolt-on edges. Also, tip spacing may not be uniform. Once you have selected an edge
with length closest to, but not less than the width of the bucket, consult pages 6-411 through 6-415 to
find the distance from the last row of the bolt holes to the end of the edge. You can cut the edge as far
as the last row of holes, but never make a cut thru or past them. Next, plug this last row of holes
(on each end) with weld because the corner weld will pass over them. Once the edge has been cut and
fit, and the holes plugged, weld the edge into the bucket as indicated.
NOTE: It may be necessary to remove material from or add material to the bucket to make the base
edge and corners fit. Cut the bucket to fit if necessary or, if needed, weld in T-1 steel and
trim to fit.
REMEMBER: There is no ‘‘standard’’ way to convert a bucket to Corner Guard System. Final
decision on weldments, cutting, etc....must be made by the dealer using Special
Instructions and this book as guides.
6-464 4Q2010
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
4Q2010 6-465
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
6-466 4Q2010
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
4Q2010 6-467
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
6-468 4Q2010
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
4Q2010 6-469
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
6-470 4Q2010
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
4Q2010 6-471
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
6-472 4Q2010
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
4Q2010 6-473
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
6-474 4Q2010
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
4Q2010 6-475
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm)
Length — inches 187.0 169.8 150.0 150.0 143.5
mm (4750) (4313) (3810) (3810) (3645)
Width 21.3 17.4 11.1 10.51 13.0
(541) (442) (282) (267) (330)
Thickness 2.5 2.25 1.25 1.25 2.0
(63.5) (57) (32) (32) (51)
Base Edge 9V-0007 9V-0009 7V-0779 8K-9914 9V-0232
LOADER BUCKETS
Weld-On Adapters
Two-Strap 3G-9494 8E-3464♦
Bucket Corners 2V-4314/5
Flushmount 3G-4554 7J-9554 1U-1304 1U-1304 8E-0464♦
Bucket Corners (2) 9V-6559 (2) 9V-6559 8K-7525/6 8K-7525/6 6W-9412/3
Bottom Strap 9J-3662 9J-3662 9J-8929 9J-8929 8E-5464♦
Bucket Corners 8K-6489/90 8K-6489/90 5V-2772/3 5V-2772/3 7K-9309/10
Long Tip 9W-8552 9W-8552 1U-3302 1U-3302 9W-8452
Size-Up Adapter
Flushmount 1U-1354 1U-1354
Two-Strap 9W-9704 4T-7554
Bottom Strap 1U-1350 1U-1350
Long Tip 4T-4702 1U-3352 1U-3352 9W-8552
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 9W-1304 9W-1304
Corners 7T-3305/6 7T-3305/6
Long Tip 1U-3302 1U-3302
6-476 4Q2010
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 127.0 127.0 122.8 122.0 120.7 118.0
mm (3226) (3226) (3120) (3100) (3067) (2997)
Width 9.6 9.0 11.8 13.0 12.0 11.1
(245) (228) (300) (330) (305) (282)
Thickness 1.0 1.0 1.57 2.0 1.77 1.25
(25) (25) (40) (51) (45) (32)
Base Edge 5V-7415 8K-9916 8V-6275 9V-0237 8K-5000 7V-0781
LOADER BUCKETS 1177
Weld-On Adapters
Two-Strap 8E-3464♦
Bucket Corners 2V-4314/5
Flushmount 1U-1254 1U-1254 8E-0464♦ 7J-9554 1U-1304
Bucket Corners 8K-7525/6 4V-8285/6 6W-9412/3 (2) 9V-6559 8K-7525/6
Bottom Strap 3G-0169 3G-0169 8E-5464♦ 9J-3662 9J-8929
Bucket Corners 8K-6455/6 8K-6455/6 7K-9309/10 8K-6489/90 5V-2772/3
Long Tip 1U-3252 1U-3252 9W-8452 9W-8552 1U-3302
Size-Up Adapter
Flushmount 1U-1304 1U-1304
Corners 8K-7525/6 8K-7525/6
Two-Strap 4T-7554
Bottom Strap 9J-8929 9J-8929
Corners 8K-6455/6 8K-6455/6
Long Tip 1U-3302 1U-3302 9W-8552
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 3G-0169 7T-3354 9W-1304
Corners (2) 3G-0169 7T-3305/6 7T-3305/6
Long Tip 1U-3252 1U-3352 1U-3302
4Q2010 6-477
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 105.7 100.4 98.4 96.0 93.3
Length — mm (2686) (2552) (2500) (2439) (2370)
Width 9.0 10.5 7.5 11.1 7.9
(229) (267) (191) (282) (200)
Thickness 1.0 1.25 0.75 1.25 0.79
(25) (32) (19) (32) (20)
Base Edge 1V-3915 9V-5328 5G-4642 7V-0782 5W-7958
LOADER BUCKETS
Weld-On Adapters
Flushmount 1U-1254 1U-1304 4T-1204 1U-1304 1U-1254
Bucket Corners 4V-8285/6 8K-7525/6 5G-5769/70 8K-7525/6 4V-8285/6
Bottom Strap 3G-0169 9J-8929 8J-7525 9J-8929 3G-0169
Bucket Corners 8K-6455/6 5V-2772/3 9R-5205/6 5V-2772/3 8K-6455/6
Long Tip 1U-3252 1U-3302 1U-3202 1U-3302 1U-3252
Size-Up Adapter
Flushmount 1U-1304 1U-1354 1U-1254 1U-1304 1U-1354
Corners 8K-7525/6 (2) 2V-6299 4V-8285/6 8K-7525/6
Two-Strap 6Y-3224
Bottom Strap 9J-8929 1U-1350
Corners 8K-6455/6 3V-7197/8
Long Tip 1U-3302 1U-3352 6Y-3222
Bottom Strap 3G-0169 9J-8929
Corners 8K-6455/6 8K-6455/6
Long Tip 1U-3252 1U-3302
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 3G-0169 9W-1304 8J-7525 9W-1304 3G-0169
Corners (2) 3G-0169 7T-3305/6 (2) 8J-7525 7T-3305/6 (2) 3G-0169
Long Tip 1U-3252 1U-3302 1U-3202 1U-3302 1U-3252
6-478 4Q2010
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 69.7 67.5 64.8 62.0 59.4
mm (1770) (1714) (1646) (1575) (1510)
Width 7.9 14.9 12.8 10.0 11.8
(200) (380) (325) (254) (300)
Thickness 0.78 2.4 2.0 1.5 1.57
(20) (60) (50) (38) (40)
Base Edge 5W-7955 8R-0982 9C-3955 5V-0166 9C-3328
LOADER BUCKETS
Weld-On Adapters
Flushmount 1U-1254
Bucket Corners 4V-8285/6
Bottom Strap 3G-0169
Bucket Corners 8K-6455/6
Long Tip 1U-3252
Size-Up Adapter
Flushmount 1U-1304
Corners 8K-7525/6
Bottom Strap 9J-8929
Corners 8K-6455/6
Long Tip 1U-3302
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 3G-0169 1U-1553 8E-6464 3G-8354 7T-3354
Corners (2) 3G-0169 9W-7555/6 8E-2465/6 3G-8355/6 7T-3355/6
Long Tip 1U-3252 9W-8552 9W-8452 1U-3352 1U-3352
4Q2010 6-479
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 41.7 35.4 36.5 35.8 35.1
mm (1058) (900) (928) (910) (892)
Width 11.8 10.6 6.0 11.1 8.9
(300) (270) (150) (282) (226)
Thickness 1.57 1.25 0.63 1.25 1.25
(40) (32) (16) (32) (32)
Base Edge 9C-2867 5W-7943 5G-3897 6W-9175 9V-3998
LOADER BUCKETS 1178
Weld-On Adapters
Flushmount 1U-1204 4T-1204 1U-1304
Bucket Corners 9R-5205/6 (2) 5G-5769 8K-7525/6
Bottom Strap 8J-7525 8J-7525 9J-8929
Bucket Corners 9R-5205/6 9R-5205/6 5V-2772/3
Long Tip 1U-3202 1U-3202 1U-3302
Size-Up Adapter
Flushmount 1U-1254 1U-1254
Corners 4V-8285/6 4V-8285/6
Two-Strap 6Y-3224
Long Tip 6Y-3222
Bottom Strap 3G-0169 3G-0169
Corners 8K-6455/6 8K-6455/6
Long Tip 1U-3252 1U-3252
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 7T-3354 8J-7525 8J-7525 9W-1304 3G-6304
Corners 7T-3355/6 (2) 8J-7525 (2) 8J-7525 7T-3305/6 3G-6305/6
Long Tip 1U-3352 1U-3202 1U-3202 1U-3302 1U-3302
6-480 4Q2010
Loaders
2 Strap Weld-on
Adapter
Sidebar
Protector
Base Edge
Wear Plate
Tip
Bolt-on
Bolt-on Edges
Wear Plate Reversible
Edge Segment
4Q2010 6-481
Loaders
6-482 4Q2010
Loaders
ROCK BUCKETS
4Q2010 6-483
Loaders
ROCK BUCKETS (SPADE)
6-484 4Q2010
Loaders
ROCK BUCKETS (SPADE)
4Q2010 6-485
Loaders
ROCK BUCKETS (SPADE)
6-486 4Q2010
Loaders
ROCK BUCKETS (SPADE)
4Q2010 6-487
Loaders
ROCK BUCKETS (SPADE)
6-488 4Q2010
Loaders
ROCK BUCKETS (SPADE)
4Q2010 6-489
Loaders
ROCK BUCKETS (SPADE)
6-490 4Q2010
Loaders
ROCK BUCKETS (SPADE)
4Q2010 6-491
Loaders
ROCK BUCKETS (SPADE)
6-492 4Q2010
Loaders
ROCK BUCKETS (SPADE)
4Q2010 6-493
Loaders
ROCK BUCKETS (SPADE)
6-494 4Q2010
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
The Mechanically Attached Adapter (MAA) System offers full protection of the base edge of the bucket while at
the same time features fast removal and installation. Full base edge protection means lower operating cost to cus-
tomers over conventional unprotected base edges because wear to the costly base edge is minimized. Fast removal
and installation translates to increased production and reduced maintenance time since the GET can be changed
quickly in the pit or in the shop at normal scheduled maintenance intervals. The MAA System provides good pen-
etration characteristics and allows operators to maximize bucket fill factors while spending less time in the bank load-
ing when compared to more blunt edges, therefore, cycle times are shorter and there is less resistance for the machine’s
power train to overcome.
Demonstration Kit
A scale model demonstration kit (form number PEKP7025) is also available through the literature distribution sys-
tem. The kit contains a small scale version of a portion of the base edge, an adapter, c-clamp and wedge, tip, edge
cover and pins and is enclosed in a green carrying case for ease in handling. The demonstration kit can be used in
conjunction with the CD ROM.
4Q2010 6-495
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
Adapter Wear-Out
The center adapters have two strips of Abrasion Resistant Material (ARM) added to the
top strap so wear out occurs on the bottom strap. The ARM is placed where the most wear
occurs: on top of the leading edge of the adapter, just behind the nose. There is a wear
indicator built into the c-clamp to provide a visual indicator of when to replace the center
adapters (see illustration at right for location). The wear indicator is intended to be an indi-
cator only and not an absolute measurement of a worn out adapter. Because of variable
site conditions, each site must develop a measurement for the wear indicator and use that
measurement as a guide to determine when the adapter is worn out. In order for the wear
indicator to provide a valid reference, the bucket must be operated with the base edge par-
allel to the ground. The bucket should be racked back to reveal the bottom side of the
bucket to perform an inspection. Measure the length of the wear indicator to determine
when to change the adapter. Do not attempt to reuse c-clamps or wedges when installing
new adapters because retention problems could occur. Always use new c-clamp assem-
blies and wedges.
Warranty Coverage
Cat GET products are warranted against breakage for the useful life of the part. Like with
all GET products, there will be some throw away material when the component has reached
the end of its useful life. Unique to the MAA System is the wear indicator which provides
a reference as to when the adapter and c-clamp is worn out. Caterpillar will not provide
warranty coverage under the breakage terms of the warranty statement if the center adapters
are worn beyond the wear indicator of the c-clamp assembly.
Bucket Positioner
One of the largest contributing factors to the reduced life of GET components is the posi-
tion of the bucket relative to the ground. In order to obtain maximum benefit of the wear
material in the MAA System, it is recommended to run the bucket parallel to the ground.
Inclination of the bucket forward will increase wear on the tips and adapters causing them
to become blunt; inclination of the bucket rearward will increase wear on the wear plates,
bottom of the tip pockets and reduce penetration. The bucket positioner on the machine
should always be adjusted so there is no angle of attack.
6-496 4Q2010
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
NOTE: Always use new pins, wedges and c-clamp assemblies when changing tips, edge protectors and adapters. Special Instruction SEHS9733
covers pin installation and removal. Use 1U-7184 Pin remover tool. To provide added safety protection during the installation process, rubber caps
are provided for tip pins, edge cover pins and wedges and are recommended for use by the installer to prevent injury.
NOTE: There are three sizes of wedges for the MAA System: standard, medium oversize and large oversize (each one is wider). In most cases, the
standard size wedge will be used, but as wear to the front portion of the slot in the base edge occurs (where the adapter mounts), it may be nec-
essary to step up in size to a wider wedge. The decision to move up should be made when the standard wedge drives in either flush or below the
top surface of the c-clamp assembly. Correspondingly, as wear continues in the rectangular slot and the medium size wedge drives in flush or
below the top surface of the c-clamp assembly, the largest, oversize wedge should be used to secure the adapters.
4Q2010 6-497
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
Installation
1. All mating surfaces should be clean and free of rust and dirt.
2. Slide the center adapters on base edge at the slotted locations and align the slot in the adapter with the slot in the
base edge.
3. Insert the c-clamp assembly in each center adapter and base edge slot with the Abrasive Resistant Material (ARM)
side down and push to the rear of the cavity.
4. Insert one wedge between the c-clamp assembly and base edge with the small end first. The wedge serrations should
be facing the c-clamp assembly. Drive the wedge with a hammer until the wedge is fully set, retighten after several
passes. Burn off the portion of the wedge protruding below the c-clamp assembly on the bottom of the bucket leav-
ing 1/4 inch (6.5 mm) protruding. It is not necessary to burn off the top portion of the wedge protruding above the
c-clamp assembly.
5. Insert one c-clamp assembly in each corner adapter (with the ARM facing outside the bucket) and corner slot and
push toward the rear of the slot. The thinner portion of the c-clamp should be on the inside of the bucket with the
ARM material toward the outside.
6. Insert one wedge between the c-clamp and corner adapter, smallest end to the bucket outside with the serrated edge
toward the c-clamp assembly. Drive the wedge with a sledgehammer from the inside of the bucket until it is totally
secure, retighten after several passes with the loader. Burn off the portion of the wedge that protrudes beyond the
c-clamp assembly on the outside edge of the bucket leaving 1/4 inch (6.5 mm) protruding.
7. Wedges should be checked periodically for tightness. If loose wedges and c-clamp assemblies are observed, tighten
immediately. If loosening persists, tack weld the wedge to the c-clamp assembly on the top side of the center adapters
and the inside of the corner adapters.
NOTE: Always use new pins when installing tips and edge protectors. Use the 1U-7184 pin remover tool. See
Special Instruction SEHS9733 for pin installation and removal.
NOTE: Wedges are available in two oversize versions. The oversize wedge should be used when the top of the
smaller wedge drives in beyond level with the adapter and c-clamp assembly.
Removal
1. Reverse the procedure.
NOTE: After the adapter is removed, the base edge should be inspected for cracks around the scallop area and
around the slot area for the c-clamp assembly and wedge. If cracks are noted, they should be repaired
immediately. After the edge protector is removed, the mounting lug welds should also be inspected for
cracks and repaired as required.
If welding is required on the base edge, preheat an area 4 inches (100 mm) around the area to be welded to
400-500° F (204-260° C). Apply low hydrogen E7018 stick rod weld to make the repair.
6-498 4Q2010
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
4Q2010 6-499
Loaders
MODULOK SYSTEM
Adapter
Side Pin Cover Abrasion Tip
Cutting Edge
Cover
6-500 4Q2010
Loaders
MODULOK SYSTEM
4Q2010 6-501
Loaders
MODULOK SYSTEM
6-502 4Q2010
Loaders
MODULOK SYSTEM
4Q2010 6-503
Loaders
MODULOK SYSTEM
6-504 4Q2010
Loaders
HIGH ABRASION SYSTEM
4Q2010 6-505
Loaders
BACKHOE LOADER BUCKETS PRODUCT DESCRIPTION
Outline
A) Select appropriate GET system. (See “Backhoe Loader Bucket Conversion Options” chart below.)
B) Determine bucket width and base edge thickness. (See “How to Take Measurements” and “Recommended Base
Edge Thickness By Backhoe Loader Weight”.)
C) Select base edge, attachments and installation procedures.
1. For Front Buckets — Consult page 6-505.
2. For Rear Buckets — Consult page 6-506.
D) Complete Ground Engaging Tools Conversion Report Form (PEEP4210).
WIDTH
WIDTH (Inner side bar to inner side bar) Base Edge Thickness
WIDTH (Outer side bar to outer side bar)
6-506 4Q2010
Loaders
BACKHOE LOADER BUCKETS PRODUCT DESCRIPTION
Selection
After measuring bucket width, OUTER SIDEBAR TO OUTER SIDEBAR, and determining base
edge thickness, turn to charts in the following section.
1. Select a base edge with length closest to, but not less than, the width of the bucket. The width of
the bucket must measure between the uncut length of the edge and its minimum cut length, as
indicated in the chart.
2. The edge selected should be similar in thickness to the edge already on the bucket.
3. Choose the adapters and tips from columns below each selected base edge.
REMEMBER: Since all buckets are different, there is no “standard” way to convert buckets. Final
decisions on welding, cutting, etc....must be made by the Cat dealers.
NOTE: In many cases, the minimum cut length for an edge is the same dimension as the regular length
for another edge.
4Q2010 6-507
Loaders
BACKHOE LOADER BUCKETS CONVERSION PROCEDURE
L2
L1
TYPE 1
4Q2010 7-1
Skid Steer Loader
COLD PLANERS
PC3 Part No.
Planer Arrangement — S/N ABW1-UP 165-5334
224-7396
Drum Group — Planer — 16" (410 mm) 149-7666 1 per planer arrangement; 50-bits and holders per drum
224-7395
Drum Group — Planer — 6" (150 mm) 165-5353 1 per planer arrangement; 20-bits and holders per drum
Drum Group — Planer — 4" (100 mm) 165-5354 1 per planer arrangement; 11-bits and holders per drum
Drum Group — Planer — 2.5" (65 mm) 165-5356 1 per planer arrangement; 11-bits and holders per drum
Bit Assembly — Cutter (Standard) 138-0697 Quantity varies by drum group
(Enhanced Rotation) 138-0678
(Heavy Duty) 140-2864
Bit Assembly — Cutter (Concrete) 149-5763 Quantity varies by drum group
Holder — Bit 7R-6187 Quantity varies by drum group
Skid Assembly 141-7266 4 per planer arrangement
Pin 141-7267 1 per skid
Ring-Retaining 6V-8754 1 per skid
PC4 Part No.
Planer Arrangement — S/N ACC1-UP 149-7669
224-7395
Drum Group — Planer — 12" (305 mm) — Standard 165-5342 1 per planer arrangement; 28-bits and holders per drum
224-7396
Drum Group — Planer — 6" (150 mm) — Optional 165-5353 1 per planer arrangement; 20-bits and holders per drum
Drum Group — Planer — 4" (100 mm) — Optional 165-5354 1 per planer arrangement; 11-bits and holders per drum
Drum Group — Planer — 2.5" (65 mm) — Optional 165-5356 1 per planer arrangement; 11-bits and holders per drum
Bit Assembly — Cutter (Low Horsepower) Quantity varies by drum group
222-7571 (Bucket of 50)
222-7578 (Pallet quantity of 2,000)
Bit Assembly — Cutter (Concrete) — Optional 149-5763 Quantity varies by drum group
Holder — Bit 7R-6187 Quantity varies by drum group
Skid Assembly 141-7266 4 per planer arrangement
Pin 141-7267 1 per skid
Ring-Retaining 6V-8754 1 per skid
VIBRATORY COMPACTORS
CV16 Part No.
Roller Arrangement — S/N ACH1-UP, CRB 165-8500
231-8600
Drum Assembly — 66" (1675 mm) 165-8447 1 per roller arrangement
240-7164
Scraper Assembly 165-8442 1 per roller arrangement
240-4882
CV18 Part No.
Roller Arrangement — S/N AAM1-UP, CRB 165-8501
231-8601
Drum Assembly — 73" (1855 mm) 165-8446 1 per roller arrangement
240-7163
Scraper Assembly 165-8441 1 per roller arrangement
240-4884
7-2 4Q2010
Skid Steer Loader
LANDSCAPE RAKES
LR15 Part No.
Landscape Rake Arrangement — S/N ADF1-UP, CRB 159-5349
224-9220
Chain Assembly 159-5365 1 per rake arrangement 225-6068
Bucket Assembly 159-5388 1 per rake arrangement 225-6068
LR18 Part No.
Landscape Rake Arrangement — S/N ADP1-UP, CRB 159-5385
224-9221
Chain Assembly 159-5364 1 per rake arrangement 225-6068
Bucket Assembly 159-5387 1 per rake arrangement 225-6068
LANDSCAPE TILLERS
LT13/LT13B Part No.
Landscape Tiller Arrangement — S/N AAS1-UP, CRB 165-3578
219-7165
Drum Assembly — Shaft 165-3585 1 per tiller arrangement 219-0444
Tine 159-5339 24/drum 219-0438
Bolt 8T-4183 1/tine 8T-4194
Locknut 6V-7687 1/tine 6V-7687
LT18 Part No.
Landscape Tiller Arrangement — S/N ABZ1-UP, CRB 159-5323
219-0426
Drum Assembly — Shaft 159-5337 1 per tiller arrangement
Tine 159-5339 36/drum
Bolt 8T-4183 1/tine
Locknut 6V-7687 1/tine
BROOMS
BA18 Angle Broom Part No.
Broom Arrangement (Manual) — S/N ACE1-UP, CRB 166-0287
241-8235
Broom Arrangement (Hydraulic) — S/N ACE1-UP, CRB 166-0288
241-8236
Brush Kit — Poly (kit contains 21 bristles) 166-0322 2 req for all poly/1 req for poly-steel mix
Bristle Assembly — Poly 166-0300 21 per 166-0322 kit
Brush Kit — Steel Wire (kit contains 21 bristles) 166-0323 2 req for all steel/1 req for poly-steel mix
Bristle Assembly — Steel Wire 166-0301 21 per 166-0323 kit
BP15 Pickup Broom Part No.
Broom Arrangement — S/N ACT1-UP 165-5346 Requires 165-9889 Bracket when used on 216/226;
241-8233 165-9800 when used on 236/246. Used for dumping bucket.
Brush Kit — Poly (kit contains 18 bristles) 165-9069 2 req for all poly/1 req for poly-steel mix
Bristle Assembly — Poly 165-9888 18 per 165-9069 kit
Brush Kit — Steel Wire (kit contains 18 bristles) 165-9070 2 req for all steel/1 req for poly-steel mix
Bristle Assembly — Steel Wire 165-9887 18 per 165-9070 kit
Bucket Assembly 169-2783 1 per broom arrangement
Edge — cutting 135-9394 62" (1586 mm) – 1 per bucket assembly
Screw — Flathead 159-2953 8 per bucket assembly
Locknut 8T-4778 8 per bucket assembly
4Q2010 7-3
Skid Steer Loader
BROOMS (continued)
BP18 Pickup Broom Part No.
Broom Arrangement — S/N ADH1-UP, CRB 165-9057 Requires 165-9800 when used on 236/246.
241-8234 Used for dumping bucket.
Brush Kit — Poly (kit contains 22 bristles) 165-9071 2 req for all poly/1 req for poly-steel mix
Brush Kit — Steel Wire (kit contains 22 bristles) 165-9072 2 req for all steel/1 req for poly-steel mix
Core Assembly 173-1760 1 per broom arrangement
241-9478
Plate — Core 173-1761 1 per core assembly
241-9457
Bucket Assembly 173-1750 1 per broom arrangement
241-9470
Edge — cutting 135-9396 74.5" (1893 mm) – 1 per bucket assembly
241-9472
Screw — Flathead 159-2953 8 per bucket assembly
Plow Bolts 248-5764 7 per bucket assembly
Nut Full 6V-8188 7 per bucket assembly
Locknut 8T-4778 8 per bucket assembly
AUGERS
A7/A7B Auger Part No.
Auger Arrangement (301.5 Mini-HEX Mount) — S/N 7BZ1-UP 153-4062
218-3205
Auger Arrangement (302.5 Mini-HEX Mount) — S/N 7BZ1-UP 153-4063
218-3207
A13 Auger Part No.
Auger Arrangement (Skid Steer Mount) — S/N ACY1-UP 161-5825
218-3178
Auger Arrangement (302.5 Mini-HEX Mount) — S/N ACY1-UP 161-5845
218-3197
A19 Auger Part No.
Auger Arrangement (Skid Steer Mount) — S/N ACY1-UP 161-5850
219-7706
Auger Bits (Common for A13 and A19) Part No.
Bit Group — Auger — 6" (150 mm) 153-4083 For use with A7, A13, A19
Bit Group — Auger — 9" (230 mm) 153-4084 For use with A7, A13, A19
Bit Group — Auger — 12" (305 mm) 153-4085 For use with A7, A13, A19
Bit Group — Auger — 18" (455 mm) 153-4086 For use with A13, A19
Bit Group — Auger — 24" (610 mm) 153-4089 For use with A13, A19
Bit Group — Auger — 36" (915 mm) 153-4091 For use with A13, A19
Bit Group — Auger — 12"/24" (305 mm/610 mm) 153-4092 For use with A13, A19
Bit Group — Auger — 18"/36" (455 mm/915 mm) 153-4095 For use with A13, A19
Tooth 153-4094 Quantity varies by bit group
Bolt — Tooth 6V-8959 1 per tooth
Locknut — Tooth 6V-7687 1 per tooth
Pilot Point 153-4093 1 per bit group
Bolt — Pilot Point 7X-2549 1 per pilot point
Nut — Pilot Point 6V-7687 1 per pilot point
Bolt — Auger Bit 7X-2532 1 per bit group
Nut — Auger Bit 8T-4131 2 per bit group
Extension — 12" (305 mm) 156-6328 Optional to extend dig depth
Adapter (HEX to Round Shaft) 156-6329 Optional to allow the use of round shaft auger bits
7-4 4Q2010
Skid Steer Loader
BUCKETS
General Purpose Part No.
Bucket As — 60" (1525 mm) 165-6152 Canceled and replaced by 279-5364
Edge — base 149-5435 1 per bucket
Bucket Ar — 60" (1525 mm) bolt-on edge 152-0224 Canceled and replaced by 279-5365
Bucket As 165-6152 Canceled and replaced by 279-5364
Edge — cutting 135-9394 62" (1586 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Bucket Ar — 60" (1525 mm) bolt-on teeth 152-0223 Canceled and replaced by 279-5366
Bucket As 165-6152 Canceled and replaced by 279-5364
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T-4778 2 per tooth
Edge — cutting (plow bolt and nut) 174-7966 62" (1586 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7972 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9599 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Bucket As — 66" (1675 mm) 165-6153 Canceled and replaced by 279-5368
Edge — base 149-5436 1 per bucket
Bucket Ar — 66" (1675 mm) bolt-on edge 152-0226 Canceled and replaced by 279-5369
Bucket As 165-6153 Canceled and replaced by 279-5368
Edge — cutting 135-9395 68" (1740 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Bucket Ar — 66" (1675 mm) bolt-on teeth 152-0225 Canceled and replaced by 279-5370
Bucket As 165-6153 Canceled and replaced by 279-5368
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T-4778 2 per tooth
Edge — cutting (plow bolt and nut) 174-7967 68" (1740 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7973 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9600 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
4Q2010 7-5
Skid Steer Loader
BUCKETS (continued)
General Purpose (continued) Part No.
Bucket As — 72" (1830 mm) 165-6154 Canceled and replaced by 279-5372
Edge — base 149-5437 1 per bucket
Bucket Ar — 72" (1830 mm) bolt-on edge 152-0229 Canceled and replaced by 279-5373
Bucket As 165-6154 Canceled and replaced by 279-5372
Edge — cutting 135-9396 74.5" (1893 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Bucket Ar — 72" (1830 mm) bolt-on teeth 152-0228 Canceled and replaced by 279-5374
Bucket As 165-6154 Canceled and replaced by 279-5372
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T-4778 2 per tooth
Edge — cutting (plow bolt and nut) 174-7968 74.5" (1893 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (plow bolt and nut) 174-7974 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (serrated) 319-9601 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Bucket As — 78" (2045 mm) 199-7721
Edge — base 199-7722 1 per bucket
Tooth 132-4720
Edge — cutting (plow bolt and nut) 174-7969 80.51" (2045 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (plow bolt and nut) 174-7975 80.51" (2045 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (serrated) 319-9602 80.51" (2045 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
7-6 4Q2010
Skid Steer Loader
BUCKETS (continued)
Dirt Part No.
Bucket As — 54" (1370 mm) 165-6155
Edge — base 149-5434 1 per bucket
Bucket Ar — 54" (1370 mm) bolt-on edge 152-0230 Canceled and replaced by 279-5435
Bucket As 165-6155
Edge — cutting 135-9393 56" (1431 mm) length/5.99" (152.4 mm) width/0.5" (12.7 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Edge — cutting (plow bolt and nut) 174-7965 56" (1431 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 6 per edge
Nut 4K-0367 6 per edge
Edge — cutting (plow bolt and nut) 174-7971 56" (1431 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 6 per edge
Nut 4K-0367 6 per edge
Bucket As — 60" (1525 mm) 165-6156
Edge — base 149-5435 1 per bucket
Bucket Ar — 60" (1525 mm) bolt-on edge 152-0231
Bucket As 165-6156
Edge — cutting 135-9394 62" (1586 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Edge — cutting (plow bolt and nut) 174-7966 62" (1586 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7972 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9599 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Bucket As — 66" (1675 mm) 165-6157
Edge — base 149-5436 1 per bucket
Bucket Ar — 66" (1675 mm) bolt-on edge 152-0232
Bucket As 165-6157
Edge — cutting 135-9395 68" (1740 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Edge — cutting (plow bolt and nut) 174-7967 68" (1740 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7973 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9600 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
4Q2010 7-7
Skid Steer Loader
BUCKETS (continued)
Utility Part No.
Bucket As — 60" (1525 mm) 165-8835 Canceled and replaced by 285-6096
Edge — base 149-5435 1 per bucket
Bucket Ar — 60" (1525 mm) bolt-on edge 165-8836 Canceled and replaced by 285-6095
Bucket As 165-8835 Canceled and replaced by 285-6096
Edge — cutting 135-9394 62" (1586 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Edge — cutting (plow bolt and nut) 174-7966 62" (1586 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7972 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9599 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Bucket As — 66" (1675 mm) 165-8746 Canceled and replaced by 285-6099
Edge — base 149-5436 1 per bucket
Bucket Ar — 66" (1675 mm) bolt-on edge 165-8747 Canceled and replaced by 285-6102
Bucket As 165-8746 Canceled and replaced by 285-6099
Edge — cutting 135-9395 68" (1740 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Edge — cutting (plow bolt and nut) 174-7967 68" (1740 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7973 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9600 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Bucket As — 72" (1830 mm) 165-8747 Canceled and replaced by 285-6102
Edge — base 149-5437 1 per bucket
Bucket Ar — 72" (1830 mm) bolt-on edge 165-8778 Canceled and replaced by 285-6101
Bucket As 165-8747 Canceled and replaced by 285-6102
Edge — cutting 135-9396 74.5" (1893 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Edge — cutting (plow bolt and nut) 174-7968 74.5" (1893 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (plow bolt and nut) 174-7974 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (serrated) 319-9601 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
7-8 4Q2010
Skid Steer Loader
BUCKETS (continued)
Light Material Part No.
Bucket As — 72" (1830 mm) 164-7414 Canceled and replaced by 279-5421
Edge — base 149-5437 1 per bucket
Bucket Ar — 72" (1830 mm) bolt-on edge 164-7412 Canceled and replaced by 279-5420
Bucket As 164-7414 Canceled and replaced by 279-5421
Edge — cutting 135-9396 74.5" (1893 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Edge — cutting (plow bolt and nut) 174-7968 74.5" (1893 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (plow bolt and nut) 174-7974 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (serrated) 319-9601 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Bucket As — 78" (1980 mm) 164-7415 Canceled and replaced by 279-5424
Edge — base 164-7433 1 per bucket
Bucket Ar — 78" (1980 mm) bolt-on edge 164-7413 Canceled and replaced by 279-5425
Bucket As 164-7415 Canceled and replaced by 279-5424
Edge — cutting 135-9397 80.5" (2045 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Edge — cutting (plow bolt and nut) 174-7969 80.5" (2045 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (plow bolt and nut) 174-7975 80.5" (2045 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (serrated) 319-9602 80.51" (2045 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Bucket As — 84" (2135 mm) 279-5429
Edge — base 220-4982 1 per bucket
Bucket Ar — 84" (2135 mm) bolt-on edge 279-5430
Bucket As 279-5429
Edge — cutting 195-7124 86.5" (2198 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Bucket As — 84" (2135 mm) (high capacity) 292-9271
Edge — base 229-3432
Bucket Ar — 84" (2135 mm) bolt-on edge 292-9270
Edge — cutting 195-7124 86.5" (2198 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Edge — cutting 174-7976 86.5" (2198 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 7 per edge
Nut 4K-0367 7 per edge
Edge — cutting (serrated) 319-9603 86.5" (2198 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 7 per edge
Nut 4K-0367 7 per edge
Bucket As — 96" (2440 mm) 292-9223
Edge — base 292-9257 1 per bucket
Bucket Ar — 96" (2440 mm) bolt-on edge 296-7597
Bucket As 292-9223
Edge — cutting 296-7680 98.5" (2503 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 13 per edge
Locknut 8T-4778 13 per edge
4Q2010 7-9
Skid Steer Loader
BUCKETS (continued)
Multi Purpose Part No.
Bucket Ar — 60" (1525 mm) 154-5004 Canceled and replaced by 279-5382
Blade GP 159-5345
Edge — base 154-5037 1 per dozer
Clam As 149-4232
Edge — base 149-5435 1 per clam
Bucket Ar — 60" (1525 mm) bolt-on edge 154-5045 Canceled and replaced by 279-5381
Bucket Ar 154-5004 Canceled and replaced by 279-5382
Edge — cutting 135-9394 62" (1586 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Bucket Ar — 60" (1525 mm) bolt-on teeth 154-5045 Canceled and replaced by 279-5381
Bucket Ar 154-5004 Canceled and replaced by 279-5382
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T-4778 2 per tooth
Edge — cutting (plow bolt and nut) 174-7966 62" (1586 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7972 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9599 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Bucket Ar — 66" (1675 mm) 154-5008 Canceled and replaced by 279-5390
Blade GP 159-5346
Edge — base 154-5059 1 per dozer
Clam As 154-5053
Edge — base 149-5436 1 per clam
Bucket Ar — 66" (1675 mm) bolt-on edge 154-5047 Canceled and replaced by 279-5391
Bucket Ar 154-5008 Canceled and replaced by 279-5390
Edge — cutting 135-9395 68" (1740 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Bucket Ar — 66" (1675 mm) bolt-on teeth 154-5048 Canceled and replaced by 279-5392
Bucket Ar 154-5008 Canceled and replaced by 279-5390
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T-4778 2 per tooth
Edge — cutting (plow bolt and nut) 174-7967 68" (1740 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7973 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9600 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
7-10 4Q2010
Skid Steer Loader
BUCKETS (continued)
Multi Purpose (continued) Part No.
Bucket Ar — 72" (1830 mm) 154-5010 Canceled and replaced by 279-5398
Blade GP 154-5080 Canceled and replaced by 279-5395
Edge — base 154-5077 1 per dozer
Clam As 154-5070
Edge — base 149-5437 1 per clam
Bucket Ar — 72" (1830 mm) bolt-on edge 154-5049 Canceled and replaced by 279-5399
Bucket As 154-5010 Canceled and replaced by 279-5398
Edge — cutting 135-9396 74.5" (1893 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Bucket Ar — 72" (1830 mm) bolt-on teeth 154-5050 Canceled and replaced by 279-5400
Bucket Ar 154-5010 Canceled and replaced by 279-5398
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T-4778 2 per tooth
Edge — cutting (plow bolt and nut) 174-7968 74.5" (1893 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (plow bolt and nut) 174-7974 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (serrated) 319-9601 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Bucket Ar — 78" (2045 mm) 199-8321 Canceled and replaced by 279-5402
Edge — cutting 135-9397 80.51" (2045 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Tooth 132-4720 11 per edge
Bolt 4F-3654 2 per tooth
Nut 4K-0367 2 per tooth
4Q2010 7-11
Skid Steer Loader
BUCKETS (continued)
Industrial Grapple Bucket Part No.
Bucket Ar — 60" (1525 mm) 157-7223
Bucket As 169-8941 1 per bucket arrangement
Edge — base 149-5435 1 per bucket assembly
Fork As — Grapple 156-0890 2 per bucket arrangement
Bucket Ar — 60" (1525 mm) bolt-on edge 157-7226
Bucket Ar 157-7223 1 per bucket arrangement
Edge — cutting 135-9394 62" (1586 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Edge — cutting (plow bolt and nut) 174-7966 62" (1586 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7972 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9599 62" (1586 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Bucket Ar — 66" (1675 mm) 157-7224
Bucket As 169-8942 1 per bucket arrangement
Edge — base 149-5436 1 per bucket assembly
Fork As — Grapple 156-0890 2 per bucket arrangement
Bucket Ar — 66" (1675 mm) bolt-on edge 157-7227
Bucket Ar 157-7224 1 per bucket arrangement
Edge — cutting 135-9395 68" (1740 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 8 per edge
Locknut 8T-4778 8 per edge
Edge — cutting (plow bolt and nut) 174-7967 68" (1740 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (plow bolt and nut) 174-7973 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Edge — cutting (serrated) 319-9600 68" (1740 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 8 per edge
Nut 4K-0367 8 per edge
Bucket Ar — 72" (1830 mm) 157-7225
Bucket As 169-8943 1 per bucket arrangement
Edge — base 149-5437 1 per bucket assembly
Fork As — Grapple 156-0890 2 per bucket arrangement
Bucket Ar — 72" (1830 mm) bolt-on edge 157-7226
Bucket Ar 157-7225 1 per bucket arrangement
Edge — cutting 135-9396 74.5" (1893 mm) length/6.49" (165 mm) width/0.63" (16 mm) thickness
Screw — Flathead 159-2953 11 per edge
Locknut 8T-4778 11 per edge
Edge — cutting (plow bolt and nut) 174-7968 74.5" (1893 mm) length/7.99" (203 mm) width/0.63" (16 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (plow bolt and nut) 174-7974 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
Edge — cutting (serrated) 319-9601 74.5" (1893 mm) length/7.99" (203 mm) width/0.75" (19 mm) thickness
Bolt 4F-3654 11 per edge
Nut 4K-0367 11 per edge
7-12 4Q2010
Skid Steer Loader
FORKS/ANGLE DOZERS
Industrial Grapple Forks Part No.
Fork Ar — 66" (1675 mm) 162-8139 Canceled and replaced by 279-5350
Fork As — Carriage 169-3567 1 per fork arrangement
Fork As — Grapple 156-0890 2 per fork arrangement
Tine 162-8154 9 per fork arrangement
Pin — Spring 3E-4370 1 per tine
Fork Ar — 72" (1830 mm) 163-4812 Canceled and replaced by 279-5360
Fork As — Carriage 169-3568 1 per fork arrangement
Fork As — Grapple 156-0890 2 per fork arrangement
Tine 162-8154 11 per fork arrangement
Pin — Spring 3E-4370 1 per tine
Pallet Forks Part No.
Carriage As 149-1411 Canceled and replaced by 261-6681
Fork Gp — Pallet — 36" (915 mm) 151-5134 2 per carriage assembly (Optional) 163-8680 (Service Option)
Fork Gp — Pallet — 42" (1065 mm) 195-6942 2 per carriage assembly (Optional)
Fork Gp — Pallet — 48" (1220 mm) 161-2437 2 per carriage assembly (Optional)
Angle Dozers Part No.
Blade Ar — 72" (1830 mm) 177-1989
Cutting Edge 135-9396 74.5" (1893 mm) – 1 per blade
Screw 159-2953 6 per edge
Locknut 8T-4778 6 per edge
Non-metallic Cutting Edge 165-8477 1 per bucket
Washer 165-7095 6 per edge
Locknut 8T-4778 6 per edge
Bolt 8T-4140 6 per edge
Blade Ar — 81.5" (1072 mm) 177-1990
Cutting Edge 149-5740 84" (2134 mm) – 1 per blade
Screw 159-2953 7 per edge
Locknut 8T-4778 7 per edge
Non-metallic Cutting Edge 165-8478 1 per bucket
Washer 165-7095 7 per edge
Locknut 8T-4778 7 per edge
Bolt 8T-4140 7 per edge
Blade Ar — 90.5" (2300 mm) 208-3331 Blade arrangement
91.3" (2320 mm) 183-1769 Blade arrangement
91.3" (2320 mm) 169-7646 Blade arrangement
91.3" (2320 mm) 208-3297 Blade arrangement
Blade Gp 186-5671
Blade As 166-1686
Cutting Edge 143-3088 64.1" (1630 mm) – 1 per blade
Bolt 3F-5108 17 per edge
Nut 4K-0367 17 per edge
Washer 5P-8247 17 per edge
End plate 159-0372 13.4" (340 mm) – 2 per edge
Blade Ar — 94.4" (2400 mm) 208-3277
Blade Gp 208-2038
Blade As 166-1687
Cutting Edge 143-3089 68" (1730 mm) – 1 per blade
Bolt 3F-5108 17 per edge
Nut 4K-0367 17 per edge
Washer 5P-8247 17 per edge
End plate 195-7193 14.4" (365 mm) – 2 per edge
4Q2010 7-13
Skid Steer Loader
TOOTHBARS
Series I (for use with Base Edge only)
60" (1525 mm) 66" (1675 mm) 72" (1830 mm) 78" (2045 mm) 84" (2134 mm)
Toothbar Part No. 136-8734 136-8735 136-8736 217-4878 275-5427
Bucket Assembly 165-6152 (GP) 165-6153 (GP) 165-6154 (GP) 199-7721 (GP) 292-9270 (HC)
Bucket Arrangement 154-5004 (MP) 154-5008 (MP) 154-5010 (MP) 199-8321 (MP) 293-0139 (HC)
Fasteners
Bolts (2) 8S-9093 (2) 8S-9093 (2) 8S-9093 (2) 8S-9093 (2) 8S-9093
Nuts (2) 2J-3507 (2) 2J-3507 (2) 2J-3507 (2) 2J-3507 (2) 2J-3507
Lockwashers (2) 3B-4516 (2) 3B-4516 (2) 3B-4516 (2) 3B-4516 (2) 3B-4516
Washers (2) 5P-8250 (2) 5P-8250 (2) 5P-8250 (2) 5P-8250 (2) 5P-8250
GP — General Purpose HC — High Capacity Bucket MP — Multi-purpose
TOOTHBARS
Series II (for use with Bolt-On Cutting Edge)
60" (1525 mm) 66" (1675 mm) 72" (1830 mm) 78" (2045 mm) 84" (2134 mm)
Toothbar Part No. 159-0330 159-0340 159-0350 195-9160 264-2084
Bucket Assembly 165-6152 (GP) 165-6153 (GP) 165-6154 (GP) 199-7721 (GP) 296-8192 (HC)
Cutting Edge 135-9394 135-9395 135-9396 135-9387 195-7124
Fasteners
Bolts (2) 8S-9093 (2) 8S-9093 (2) 8S-9093 (2) 8S-9093 (2) 8S-9093
Nuts (2) 2J-3507 (2) 2J-3507 (2) 2J-3507 (2) 2J-3507 (2) 2J-3507
Lockwashers (2) 3B-4516 (2) 3B-4516 (2) 3B-4516 (2) 3B-4516 (2) 3B-4516
Washers (2) 5P-8250 (2) 5P-8250 (2) 5P-8250 (2) 5P-8250 (2) 5P-8250
Bucket Arrangement 154-5004 (MP) 154-5008 (MP) 154-5010 (MP) 199-8321 (MP) 296-8057 (HC)
Cutting Edge 135-9394 135-9395 135-9396 135-9387 195-7124
Fasteners
Bolts (2) 8S-9093 (2) 8S-9093 (2) 8S-9093 (2) 8S-9093 (2) 8S-9093
Nuts (2) 2J-3507 (2) 2J-3507 (2) 2J-3507 (2) 2J-3507 (2) 2J-3507
Lockwashers (2) 3B-4516 (2) 3B-4516 (2) 3B-4516 (2) 3B-4516 (2) 3B-4516
Washers (2) 5P-8250 (2) 5P-8250 (2) 5P-8250 (2) 5P-8250 (2) 5P-8250
GP — General Purpose HC — High Capacity Bucket MP — Multi-purpose
4Q2010 8-1
UNDERGROUND MINING
8-2
Width Weight
Machine Model mm kg R2900 R2900 R2800 R2800 R1700 R1700 R1500 R1500
Bucket Arrangement 9EL3304 9EL3302 9DE6368 9DE6367 9DE8662 9DE9680 9DE9037 9DE9529
9EL3305 9EL3300 9EL1628 9EL0615 9EL6711 9EL3169 9DE9930
4Q2010
9DE8230
9DE6747
Bucket Width 3354 3054 3154 3002 2772 2672 2749 2444
Lip Width (mm) (A) 3400 3100 3200 3048 2818 2718 2795 2490
Spade Length (mm) (B) 710 632 710 710 710 614 700 622
Edge Center Width (mm) (C) 576 569 569 569 546 520 510 500
Underground Mining
LIP PROTECTION SYSTEM
Edge End Width (mm) (D) 339 351 349 363 360 335 325 335
Lip Thickness (mm) 50 50 50 50 50 50 50 50
Lip Assembly* 136-6738 135-9650 135-9651 135-9652 135-9653 135-9736 135-9754 135-9757
Weld-on Lug* 109-9139 37.2 9 9 9 9 7 7 7 7
Corner Shroud - LH 135-8196 379 45.3 1 1 1 1 1 1 1 1
Corner Shroud - RH 135-8197 379 55.4 1 1 1 1 1 1 1 1
Transition Shroud - LH 109-9136 373 61.2 1 1 1 1 1 1 1 1
Transition Shroud - RH 109-9135 373 49.4 1 1 1 1 1 1 1 1
Straight Shroud 109-9131 250 49.4 2
Straight Shroud 109-9132 330 73.2 2 5 4 2 1 1
Straight Shroud 109-9133 420 73.2 3 1 1 1 1 2
Straight Shroud 109-9134 470 9 2 2 2
Crescent Pin ◊138-6512◊ 1.1 9 9 9 9 7 7 7 7
Spring Retainer ◊109-9143◊ 0.05 18 18 18 18 14 14 14 14
Shroud Heel (Straight)** 157-1019 250 30.9
Shroud Heel (Curve)** 157-1027 250 28.5
Shroud Heel (Straight) 138-6529 175 13.8
Shroud Heel (Curve) 138-6551 175 13.4
* Weld-on lugs are included in lip assembly.
** Use heel shrouds on bucket heel for wear protection. The number needed will vary with bucket size and desired protection. See drawings below.
◊ Longer pin 138-6512 and rubber plug 138-6528 are optional retention parts.
Use 1 plug per pin. A 22.5°
45°
TIPS AND ADAPTERS***
D 15.7
Adapters w/ARM C 50
Center 114-0464 116-7464
RH 114-0465 116-7465
LH 114-0466 116-7466 11
Lip
Tips B
Heavy Duty Abrasion 9N-4453
Heavy Duty Pin 114-0468 Base Edge
Heavy Duty Retainer 107-3469
*** J460 for 50 mm edges.
Caterpillar’s Ground Engaging Tool (GET) Lip Protection System is designed primarily for Caterpillar Elphinstone
loaders, but can be used on any underground or surface bucket with a 50 mm lip. The system features pin-on
shrouds which can be used between teeth or used together to create a continuous edge. Shrouds are available in
multiple widths to fit virtually any bucket. Caterpillar Elphinstone loaders which typically use 50 mm lips include
the R1500, R1700, R2800, R2900, 988, 988B, 988F, and 988G.
Pin-On Shrouds
Shrouds are made from Caterpillar’s through-hardened DH-2™ alloy steel for superior hardness, wear resistance
and strength. The sharp profile provides good penetration which is maintained throughout the life of the shrouds.
All shrouds mate up evenly to create a continuous edge. When teeth are required for extra penetration, straight
shrouds can be used between tips and adapters as an alternative to bolt-on or weld-on edge protection options.
Shrouds come in three styles: straight (in four widths), transition (left and right hand) and corner (left and right
hand). Transition shrouds are used on spade lips where the angled sides of the lip meet the leading, flat portion.
Corner shrouds have extra steel to combat the higher wear rates experienced in the corners.
4Q2010 8-3
Underground Mining
Retention System
Each shroud locks into a lug which is welded to the lip. A crescent shaped pin keeps the shroud locked into the
lug. Spring retainers are placed on both sides of the lug to keep the crescent retainer in place. This retention sys-
tem is very positive and requires no special tools. As an added feature, the pins and retainers are typically reusable.
The crescent shape of the pin minimizes interference with adjacent lugs or adapters to facilitate ease of installa-
tion and removal. Pins and springs sit on the lip and install into cavities in the lugs.
Weld-On Lug
There is one weld-on lug used with all shrouds. Part number is 109-9139. The lug is only welded in the front (A)
and in the slot (B). Shrouds can be used to help position lugs before welding. Lugs for corner shrouds and transi-
tion shrouds should be located first, then space straight shrouds evenly in the remaining spaces. Slide the appro-
priate shroud into the lug, push the lug tight against the lip in the correct position while pushing the lug against the
shroud. Tack the lug in this position and finish welding after removing the shroud. Note that lugs for the transition
shrouds will be at 5 degree angles.
In the front of each lug (A), fill the 8 mm groove, then cover with a 10 mm fillet weld. In the slot (B), use a 12 mm
minimum fillet weld. This design provides substantial weld strength and ensures the lugs are not pulled off the lip
in service which reduces maintenance requirements.
Another feature which reduces maintenance is that lugs stop shrouds from being driven into the lip and beating it
in. As a result, lips don’t need to be built up or rebeveled and lugs do not have to be removed and rewelded far-
ther back to keep shrouds tight.
All shrouds lock into the weld-on lug instead of going over it to keep shroud throwaway material to a minimum.
This causes much of the lug to be exposed, but very little wear occurs due to a shadow effect from the shrouds.
8-4 4Q2010
Underground Mining
Shrouds fit the same lip profile as standard Caterpillar adapters except an extra 45° bevel at the front is used. This
small bevel allows clearance for an internal radius on the shroud to minimize stress levels. The lips used and
offered by Caterpillar are Bisalloy 80 steel which is also Elphinstone’s primary material. Bisalloy 80 is well proven
in underground applications. Lip dimensions which provide good fitup for continuous edge configurations in var-
ious Elphinstone buckets are listed on page 8-2. Lips should overhang the bucket sidebar 23 mm on each end for
best fit of the corner shrouds.
Heavy duty J460 size tips and adapters from 988 rock buckets perform very well underground. Adapter part num-
bers are 114-0464/5/6 and the preferred tip style is the heavy duty abrasion, 9N4453. Heavy duty retention pcs are
114-0468 pin and 107-3469 retainer assembly. Shrouds are designed to not interfere with installation and removal
of tip pins.
These adapters are also available with Caterpillar abrasion resistant material (ARM) in the grooves on the bottom
side and a strip on the top for even greater wear resistance. Part numbers for these are 116-7464/5/6.
4Q2010 8-5
Underground Mining
Installation
1. Rotate the back portion of the shroud into the lug and slide back as far as it will go.
2. Lay a crescent pin on the lip and tap it into lug until centered. It will fill the space created when the shroud was
pushed back. This should require only light taps with a hammer. The pin is symmetric so orientation does not
matter. In some setups and for corner shrouds the pin will only install from one side.
3. Lay two spring retainers on the lip and tap into the slots at the back of the lug. Be sure the spring is oriented as
shown above and the pin is centered in the lug. When in all the way, the spring protrusion locks into place and
the leading end of the spring sits outside the pin.
Removal
1. Clean all around the lug and pin with a high pressure water hose to remove dirt and fines.
2. Decide which way you’re going to drive the pin out. In some setups the pin can only go in and out from one side.
3. Remove the spring blocking the pin from going the chosen direction. The other spring can remain in place. Remove
the first spring by tapping it on through the lug in the same direction in which it was installed. Use a small diame-
ter punch to get it started, then continue to punch from behind or on the leading edge of the spring which is now
exposed.
4. Use a punch (a spare pin can be used) and hammer to drive the pin out. The hole in the end of the pin can also be
used as a prying and driving surface once exposed. For the corner shroud it may be helpful to first drive the pin
towards the sidebar to loosen it before driving back the other way to remove. Be sure to remove both springs first.
5. Slide the shroud forward and rotate out of the lug.
6. Clean the lug to remove any dirt before the next shroud is installed. This is also a good time to inspect the lug welds
for cracks and repair as required.
7. If reusing the pin, be sure to grind off any burrs and clean off any dirt which may interfere with reinstallation. Clean
dirt from the springs before reuse as well.
Always wear safety glasses when installing and removing GET.
8-6 4Q2010
Underground Mining
WELD-ON UNDERGROUND GET
Cat® Ground Engaging Tools (GET) has developed a weld-on system for underground mining loaders also known as
Load, Haul, Dump (LHD) machines. This system was designed to be more productive than the previous half-arrow
system and offers more wear material to maximize system wear life and bucket protection.
Our new weld-on system also reduces downtime. Traditionally, corners wear faster than edge segments causing the
machine to be idled twice for maintenance. The new design was developed for an even wear rate between corners and
edge segments, allowing both to be replaced at the same time.
Center-edge segments are offered in two lengths to minimize waste when cutting and fitting the parts.
4Q2010 8-7
Underground Mining
Shrouds
Shrouds are made from Caterpillar’s through-hardened DH-2™ alloy steel for superior hardness, wear resistance and
strength. The sharp profile provides good penetration, which is maintained throughout the life of the shrouds. All
shrouds mate up evenly to create a continuous edge. When teeth are required for extra penetration, straight shrouds
can be used between tips and adapters as an alternative to bolt-on or weld-on edge protection options.
8-8 4Q2010
Underground Mining
Bucket Configuration
Listed below are the bucket configurations for the LHD machines. Each configuration would include a Right Hand
Corner (232-2078) and a Left Hand Corner (232-2079). The remaining Center Edge Segments and their quantities
are listed by configuration.
Installation instructions can be found under the Internal Release Memo (PELJ0771) dated May 2007.
4Q2010 8-9
Underground Mining
NOTES
4Q2010 9-1
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
Mounting
Block
140-2864
9-2 4Q2010
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
• Tapered spring.
• Optimized head design.
• Tapered spring.
• Optimized head design.
4Q2010 9-3
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
113-0328
Note: * This pallet quantity includes 2,500 bits rather than the standard 2,000 bits per kit.
9-4 4Q2010
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
117-3887
117-4076
113-0312
4Q2010 9-5
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
9-6 4Q2010
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
4Q2010 9-7
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
9-8 4Q2010
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
COLD PLANER CUTTING EDGES FOR PM-565 (S/N 3TK) AND ALL PM-565/B
Part Length Thickness Width
Number inch mm inch mm inch mm Plow Bolt Nut Washer
3
132-1083 24 610 ⁄4 19 8 203 (6) 3F-5108 (6) 7X-0448 (6) 8T-4122
3
132-1084 36 914 ⁄4 19 8 203 (9) 3F-5108 (9) 7X-0448 (9) 8T-4122
3
4T-3030 48 1214 ⁄4 19 8 203 (12) 3F-5108 (12) 7X-0448 (12) 8T-4122
3
132-1085 60 1524 ⁄4 19 8 203 (15) 3F-5108 (15) 7X-0448 (15) 8T-4122
4Q2010 9-9
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
9-10 4Q2010
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
4Q2010 9-11
Paving Products
SOIL STABILIZERS
Nut /Washer/Bolt
U-Bolt
Chopper Blade
9-12 4Q2010
Paving Products
SOIL STABILIZERS
Retaining Nail
Tool Holder
Straight Tool
Holder
Optional
4Q2010 9-13
Paving Products
RM250 / SM250
COMBINATION ROTOR — Designed to pulverize asphalt layers or blend additives with soil by simply
changing bits. Bits are mounted in drive-in, knock out holders which accept either point-attack reclamation bits or
spade-type bits for stabilization applications. All bit holders, except end ring holders are breakaway design.
Replaceable, hard faced end rings protect rotor mandrel from wear.
Bit
Holder
Flighting
Bit
Breakaway Holder
9-14 4Q2010
Cold Planer (formerly called Pavement Profiler) blades are made of heat treated high carbon steel to scrape material from the pavement. They are bolted to
the rear side of the drum housing.
4Q2010
9-15
COLD PLANERS / ROAD RECLAIMERS / SOIL STABILIZERS
Paving Products
Paving Products
COMPACTORS
9-16 4Q2010
Paving Products
ASPHALT PAVERS
ASPHALT PAVER
Auger Half-Segments Front of Machine
Screed
Hopper Front Flashing
Auger Quarter-Segments
FASTENING HARDWARE
Model Qty. Part No.
AP-800B
Bolt-Auger Segment & Reverse Kicker Mounting 12 7X-0334
Bolt-Bed Plate Mounting 36 8T-7994
Washer-Auger Segment & Bed Plate Mounting 36 8T-4223
Nut-Auger Segment & Bed Plate Mounting 36 6V-8188
AP-1050
Bolt-Auger Segment & Reverse Kicker Paddle Mounting 16 7X-0334
Bolt-Reverse Kicker Tip Mounting 8 4F-3648
Washer-Auger Segment, Reverse Kicker Paddle & Tip Mounting 28 8T-4223
Nut 26 6V-8188
Bolt-Bed Plate Mounting 24 8T-7994
Washer-Bed Plate Mounting 24 8T-4223
Nut-Bed Plate Mounting 24 6V-8188
AP-1000
Bolt-Auger Segment Mounting 16 7X-0334
Bolt-Bed Plate Mounting 24 8T-7994
Washer-Auger Segment, Reverse Kicker Paddle & Tip Mounting 50 8T-4223
Nut-Lock-Auger Segment Mounting 50 1K-6872
Washer-Bed Plate Mounting 24 8T-4223
Nut-Bed Plate Mounting 24 6V-8188
Bolt-Reverse Kicker Tip Mounting 8 4F-3648
4Q2010 9-17
Paving Products
ASPHALT PAVERS
RH Nose Bar
Baffle
Wear Plate
VIP SCREED
Screed Length 10 ft. (3048 mm) 8 ft. (2438 mm)
Screed Length Qty. Part No. Qty. Part No.
Main Wear Plate 1 7R-7518 1 7R-7521
Wear Plate Extender (LH) 1 7R-7519 1 7R-7522
Wear Plate Extender (RH) 1 7R-7519 1 7R-7522
Wear Plate Extension (small) (LH) 1 7R-7520 1 7R-7520
Wear Plate Extension (small) (RH) 1 7R-7520 1 7R-7520
Left Nose Bar (main) 1 7R-7523 1 7R-7535
Right Nose Bar (main) 1 7R-7524 1 7R-7529
Left Nose Bar (small) 1 7R-7527 1 7R-7527
Right Nose Bar (small) 1 7R-7528 1 7R-7528
Left Nose Bar Extension 1 7R-7525 1 7R-7531
Right Nose Bar Extension 1 7R-7526 1 7R-7530
Stud 64 8T-7998 52 8T-7998
Shim 20 8C-7135 20 8C-7135
Shim 20 8C-7136 20 8C-7136
Bolt 32 5C-6565 26 5C-6565
Flatwasher 96 8T-4223 78 8T-4223
Locknut 64 2K-0564 52 2K-0564
9-18 4Q2010
Paving Products
ASPHALT PAVERS
NOSE BAR
SHIM
SPACER BAR
SPACER
SPACER MAIN WEAR
PLATE
NOSE BAR
4Q2010 9-19
Paving Products
ASPHALT PAVERS
PAVEMASTER SCREED
Screed Base
Screed Plate
PAVEMASTER SCREED
Lengths Locknut* Flatwasher
feet mm Plate Assembly Qty. Part No. Qty. Part No.
10.0 3048 8C-8309 36 1K-6872 36 2M-0849
8.0 2438 8C-7211 30 1K-6872 30 2M-0849
Extension
0.5 152 5E-9417 6 1K-6872 6 2M-0849
1.0 305 5E-9421 9 1K-6872 9 2M-0849
2.0 610 5E-9458 16 1K-6872 16 2M-0849
3.0 914 5E-9430 12 1K-6872 12 2M-0849
* The new torque specification for tightening nuts that fasten screed plate assemblies to the screed base is 60 ± 12 N•m (45 ± 9 ft. lbs.).
9-20 4Q2010
Paving Products
WINDROW ELEVATORS
Made of high carbon steel, these blades are bolted to the elevator housing to scrape material to the elevator. The
following part numbers are used on all serial numbers of the 601B and 851B Windrow Elevators.
MOUNTING HARDWARE
Wing Blades Side Blades Bottom Blade
Qty. Part No. Qty. Part No. Qty. Part No.
Bolt 14 1D-5166 4 A0-0321
Lockwasher 14 3B-4508 4 3B-4508
Flatwasher 14 4B-4280 4 4B-4280
Nut 14 1D-4719 4 1D-4719
Capscrew 10 8T-4330 (851B)
8 8T-4330 (601B)
4Q2010 9-21
Paving Products
NOTES
4Q2010 10-1
Motor Graders
10-2 4Q2010
Motor Graders
Bit Info:
348-9051 = Container of 50 bits each 322-7295 = Container of 30 bits each
4Q2010 10-3
Motor Graders
10-4 4Q2010
Motor Graders
4Q2010 10-5
Motor Graders
10-6 4Q2010
Motor Graders
HARDWARE
Size Application Bolt Nut Washer
0.63" (16 mm) All 3F-5108 4K-0367 5P-8247
0.75" (19 mm) Except 14G, 16G, & H Series 4F-7827 2J-3506 5P-8248
0.75" (19 mm) 140H, 143H, 160H, 163H, 14G, 14H 5J-4773 2J-3506 5P-8248
0.75" (19 mm) 16G except 16' blade 5J-4771 2J-3506 5P-8248
0.75" (19 mm) 16H, 16G with 16' blade (20) 5F-8933 2J-3506 5P-8248
0.75" (19 mm) (2 bolt part numbers for 16H (22) 5J-4771 2J-3506 5P-8248
and 16G with 16' blade)
1" (25 mm) 24H (16) 1J-3527 2J-3507 5P-8250
1" (25 mm) (2 bolt part numbers for 24H) (54) 4J-9058 2J-3507 5P-8250
Note: The 140H & 143H motor graders use both 0.63" (16 mm) and 0.75" (19 mm) bolts depending on the blade
group number. See table below for application.
Blade Group No. Bolt Size
8X-8011 0.63" (16 mm)
8X-8016 0.63" (16 mm)
112-4520 0.75" (19 mm)
112-4521 0.75" (19 mm)
4Q2010 10-7
Motor Graders
10-8 4Q2010
Motor Graders
Moldboard
Length Dimensions
feet mm W-H-T (inch) W-H-T (mm) Part
13-14 3962-4267 75 x 15.25 x 0.38 1905 x 387 x 10 4D-5821*
12-13 3658-3962 63 x 15.25 x 0.38 1600 x 387 x 10 4D-5820**
* Use 8W-5266 for larger radius moldboards. Radius is 16.25" (413 mm).
** Use 8W-5265 for larger radius moldboards. Radius is 16.25" (413 mm).
*** Blank Plate without Bolt Holes.
4Q2010 10-9
Motor Graders
Recommend 1.38" (35 mm) thick by 10" (254 mm) or 1" (25 mm) thick
by 10" (254 mm) wide flat edges. They provide maximum strength and
wear material. In severe applications these edges will provide the lowest
material costs per hour.
Recommend 0.75" (19 mm) thick serrated edges. Serrated edges exert more
down pressure per square inch of contact area for improved penetration in
frozen or hard-packed materials. In heavy-duty applications, 1" (25 mm) by
10" (254 mm) flat or 1" (25 mm) by 8" (203 mm) flat or curved serrated
edges may be used. In extreme conditions, serrated edges can be installed
over standard 6" (152 mm) edges for extra strength.
Serrated
For High Abrasion/Low Impact Applications
Tungsten carbide edges provide many times the wear life and lower cost per
hour than standard DH-2 edges if used as recommended, in low to medium
impact, highly abrasive applications such as maintenance of unpaved, sand
and gravel roads. Tungsten carbide edges are manufactured by milling a flat
on the front of a steel cutting edge base and brazing tungsten carbide “tiles”
onto the flat (see below). They are curved for excellent penetration and are
available in 2' (610 mm) and 3' (914 mm) lengths and 4.75" (121 mm) and
6.75" (171 mm) widths. Reversible overlay end bits are available for use Tungsten carbide edge
with these edges. The end bits are made from DH-2 steel and are covered
by the GET Warranty against breakage. Warranty on the new carbide edge
is the same as that for GraderBits, meaning the steel edge base is covered,
but not the tungsten carbide tile itself.
10-10 4Q2010
Motor Graders
Edge Width
On motor grader cutting edges, width translates to wear material, so as a general rule,
for the longest life, use the widest edge. An 8" (203 mm) edge, for example, will give
you 100% more available wear material and edge life than a 6" (152 mm) edge… at
only about 35% more cost. In addition, hardware usage and total downtime will be cut
by 50%. To extend cost savings even farther, a 10" (254 mm) cutting edge will last
three times longer than a 6" (152 mm) edge when used under comparable conditions.
Crowning describes a normal wear pattern in which the cutting edge conforms to the
material being graded. When extreme crowning occurs or when finishing applications
require tolerances less than 1/4" (6 mm), the best value may be in selecting a
narrower and thinner cutting edge. This approach reduces costs by minimizing the
amount of usable iron that must be thrown away.
Edge Thickness
Penetration requirements determine how thick your edge should be. The easier mate-
rial is to penetrate, the thicker the edge you should use. This simple chart illustrates
how wear material increases with thickness.
4Q2010 10-11
Motor Graders
Cat moldboard and overlay end bits are made from tough, thru-hardened
DH-2 steel. Moldboard end bits protect the moldboard itself from wear
and damage. Overlays provide additional wear protection and strength for
both the moldboard and the cutting edge.
Reversible Overlays
• Used with curved edges.
• Protects and strengthens both moldboard and cutting edges.
• Reversible design provides “second life” for greater value.
Flat Overlays
• Provides same moldboard and edge protection for flat edges. Not avail-
able for 14G or 16G graders.
10-12 4Q2010
Motor Graders
The Cat GraderBits™ System is a motor grader ground engaging tool system
that can offer your customers many advantages over standard cutting edges.
This system is made up of adapters that bolt up to the moldboard and indi-
vidual bits that fit into the adapter.
The Cat GraderBits System has been designed primarily for maintaining and
reconditioning gravel roads; including ice and snow removal. In addition, a
continuous Cat GraderBits configuration can be used on paved surfaces.
There are two major customer groups that should be targeted — mines and
governmental bodies. Since aggregate size is often different on governmental vs.
mining haul roads, each group has an adapter designed for its needs. The mining
adapter has a wide gap between the Cat GraderBits to accommodate large
aggregate. Since many country roads use smaller aggregates, the gap is narrower
on these adapters. Either adapter can be sold in either market providing bolt hole
diameters match-up. See part number information.
Features/Benefits
The Cat GraderBits System has many benefits. One of the most important is the
increase in wear life over standard, heat-treated edges. However, the Cat GraderBits
System costs much more than a set of standard edges. Successful selling will
require a customer’s understanding of ALL benefits. Selling wear life as the only
feature will result in fewer sales.
Features Benefits
✔ Serrated design ✔ Excellent penetration, conserves gravel and
increases productivity
✔ Tungsten carbide wear material ✔ 6-10 times greater wear life than standard
cutting edge (10" x 1"; 254 mm x 25 mm)
✔ 12-15 times greater wear life than standard cutting
edge (8" x 3/4"; 203 mm x 19 mm)
✔ Large decrease in grade blade maintenance ✔ Reduced downtime
✔ Smoother haulroads ✔ Longer tire and mechanical life, faster travel
speeds
✔ Four Cat GraderBit widths ✔ Allows several edge configurations, including
continuous edge
Detailed Comments on Features & Benefits
1. One of the benefits that can be seen immediately is the ease of penetration
compared to standard continuous edges. Using a serrated configuration,
initial penetration is easier. Ridges are removed and trenches are filled in one
pass. Material is allowed to pass between the Cat GraderBits which helps
conserve gravel. All of these benefits help cut costs which will maximize
profitability.
2. Tungsten Carbide is used on the Cat GraderBits at the wear area. This is the
same material used in Cat abrasion-resistant material edges. It is an extremely
hard alloy which offers excellent wear life in ground engaging tools. Cat
GraderBit wear life will depend on the application. In a mining haulroad
application, wear life should range between 6-8 times greater than heat-
treated edges. On county roads, it should average 8-10 times the life. A mine
will typically have larger aggregate and higher impact than a county road,
thus wear life is less than a county road application.
4Q2010 10-13
Motor Graders
Operation
Proper operation is very important to assure acceptable Cat GraderBit system
life. There are five points to stress with the operators.
1. The face of the carbide tile should be perpendicular to the ground.
2. Moldboard sidecast angle should be between 0-10°.
3. Penetration depth should be approximately 1-1.5" (25-38 mm) maximum.
4. Operating speed should be held to 4-6 mph. In higher impact applications,
slower speeds will reduce potential for breakage.
5. If machine is equipped with an accumulator, make sure it’s on when
operating GraderBit System.
10-14 4Q2010
Motor Graders
Warranty
The adapter, and Cat GraderBit (with the exception of the tungsten car-
bide) are warranted against breakage under the GET warranty. The
tungsten carbide and the braze material are warranted under the standard
6-month new parts warranty.
Description
The Cat standard rotating bit system is comprised of three or four foot
long adapter boards to accommodate a 7/8" (shank) carbide-tipped bit. The
adapter boards are available in either 5/8" or 3/4" bolt hole punch. There is
a heavy-duty adapter board option that accepts a 1" (shank) carbide-tipped
bit. The heavy-duty boards are only available in a 3/4" bolt hole punch,
and are available in a three and four foot adapter board sections. All three-
foot boards use 21 bits; the four-foot boards use 28 bits.
The replaceable carbide bits rotate and self sharpen which allows for superior
wear over conventional curved or flat carbide-insert blades. The carbide
tip is also engineered with flat sides that aid in bit rotation. The rotating bit
also provides improved penetration and cutting ability, which can reduce the
number of passes required by the motor grader compared to conventional
cutting edges. The carbide bits if maintained can last as long as 5–10 sets
of conventional grader blades.
The multiple uses of the rotating bit system include; reclaiming lost gravel
cast to the shoulders or imbedded into the road surface, which reduces the
cost of new material (gravel). The system is extremely useful in cutting
compacted snow or ice, giving the road better traction than the smooth
cutting conventional blade setup. Removing washboards or cutting potholes
is another feature of this system, which substantially improves and sustains
the condition of dirt or oiled roads.
Installation
1. Remove existing cutting edges from moldboard. Clean moldboard of
all dirt.
2. Bolt Cat adapter boards. Tighten bolts. Rap the bolt heads sharply with
a hammer. Torque bolts a second time.
3. On level ground surface, set adapter boards perpendicular, or 90 degrees
from the level ground surface. Set magnetic protractor (ex. Mayes Level + Correct
Angle Finder) on front of adapter board surface. Rack moldboard back operating angle
until protractor reads 70 degrees, or adapter board should be racked back
20 degrees from perpendicular position.
4. Caution: If adapter angle is not set correctly, the moldboard will chatter
and vibrate, and the rotating bits will not properly wear or rotate (flatten).
If this occurs, readjust adapter boards to the correct operating angle.
(See illustration)
4Q2010 10-15
Motor Graders
Operation
1. Insure that bits are rotating freely and the adapter boards are set in correct
operating position.
2. Check rotation of bits daily. A bit not rotating will develop a flat wearing
surface on the carbide tip, and leave a channel mark on the road.
3. In ice and compacted snow conditions, operate blade in “float” position
with no down pressure. Grade in low gear (3rd or less).
4. If bits are not freely rotating, spray or power wash, or remove and clean
debris from bit holder bore hole. Only lubricate with WD 40 or an
environmentally approved lubricant.
Governmental Bid Specifications for Motor Grader Edges/Bits
Many governmental units periodically review their bid specifications for
purchasing motor grader cutting edges and end bits. It is important to be
aware of when such reviews take place and provide recommendations.
Caterpillar suggests that physical properties, rather than chemical properties,
represent the most accurate guide to edge performance.
3. Breakage guarantee
Supplier warrants that if an edge breaks during operation, it will be
replaced free of charge (with the exception of high-carbon edges). The
guarantee translates into positive benefits:
• Fewer edges purchased.
• Users save money. Since the guarantee reduces the user’s risk, he can
use 8" (203 mm) wide edges instead of 6" (152 mm) wide edges in most
applications. This means two extra inches of wear material are available.
Cat Motor Grader edges meet all of these requirements.
10-16 4Q2010
Motor Graders
4Q2010 10-17
Motor Graders
Benefits
✔ Curved double bevel design for excellent penetration
✔ Standard highway bolt hole pattern — fits all makes of
motor graders
✔ Countersunk bolt holes to protect bolt heads
✔ Rust preventive coating for long, rust-free storage
✔ Backed by Caterpillar Parts Warranty covering defects in
material and workmanship
*Subject to certain terms and conditions. See your Caterpillar Dealer for warranty statement.
For additional strength and wear resistance specify Caterpillar Through-Hardened DH-2 Edges
10-18 4Q2010
Motor Graders
4Q2010 10-19
Motor Graders
10-20 4Q2010
Motor Graders
4Q2010 10-21
Motor Graders
NOTES
4Q2010 11-1
Rippers / Scarifiers
Example: R 500
Alpha character indicates this Numeric digits indicate relative
as a ripper tip. ripper family size (5.00").
11-2 4Q2010
Rippers / Scarifiers
D11N RIPPER
4Q2010 11-3
Rippers / Scarifiers
D11R RIPPER
11-4 4Q2010
Rippers / Scarifiers
D10 RIPPER
4Q2010 11-5
Rippers / Scarifiers
D10N RIPPER
11-6 4Q2010
Rippers / Scarifiers
D10R/D10T RIPPER
4Q2010 11-7
Rippers / Scarifiers
D9H RIPPER
11-8 4Q2010
Rippers / Scarifiers
D9L RIPPER
4Q2010 11-9
Rippers / Scarifiers
D9N RIPPER
11-10 4Q2010
Rippers / Scarifiers
D9R/D9T AND D9R HD RIPPER
4Q2010 11-11
Rippers / Scarifiers
D8N RIPPER
11-12 4Q2010
Rippers / Scarifiers
D8K RIPPER
4Q2010 11-13
Rippers / Scarifiers
D8L RIPPER
11-14 4Q2010
Rippers / Scarifiers
D8R/D8T RIPPER
4Q2010 11-15
Rippers / Scarifiers
11-16 4Q2010
Rippers / Scarifiers
4Q2010 11-17
Rippers / Scarifiers
Top to
2nd pin Front
hole Shank
Length
Total
Assembly
Length
Degree
Ripping
Angle
Thickness
Width
11-18 4Q2010
Rippers / Scarifiers
4Q2010 11-19
Rippers / Scarifiers
• After you have the desired length, mark across the measured points and cut.
• Weld on the new adapter.
11-20 4Q2010
Rippers / Scarifiers
Adapter Nose
Shank Adapters and Adapter Noses
• Used to repair Caterpillar shanks or to convert competitive shanks to
Caterpillar tips and protectors.
• Forged DH-2 steel.
• Adapters available for all models; noses available for all adapters
except D11N single shank.
Lifting Eye
Shank 8J-4889
Retainer
6Y-9704
Protector
Protector
Tip
D11N Multi-Shank, D11N Multi-Shank,
D10, D10N, D9L D10, D10N, D9L
D11N Single Shank
(Old style one-pin protector)
Shank
Protector
(shorter option
available)
Tip
Adapter
D9G, D9H, D9N, D8H, 24H, D5, D6, D6M, 977, D11N, D11R, D10N, D11N, D11, D10N,
D8K, D8L, D8N 973, 16 D10R, D9R, D9N, D8N, D8R D10, D9L
Extended Protector Ripper Multi-Piece Protector Extended 2 Pin
One-Piece Protector
4Q2010 11-21
Rippers / Scarifiers
Pins
OLD NEW
Ripper
Tip Ripper
Tip
Shank Shank
Tips
• DH-3 steel for better heat resistance.
• Center-rib design stays sharp longer.
• Centerline and penetration styles available — use penetration style for
easier surface penetration. Centerline Tip
• Sharp tip offers best penetration but least wear material.
• Various lengths to match job conditions — longer tips move through
the ground easier (sharper) and have less expensive wear material —
shorter tips are stronger.
• Side-pinned for better retention. Penetration Tip
• Unconditionally guaranteed against breakage. (always install with rib up)
Sharp Tip
ARM Tips
• DH-3 thru-hardened steel.
• Temper effect elimination.
• Increased ARM impact resistance when factory applied.
• Increased tip life.
• Increased productivity.
• Reduced cost per yard of ripped material. ARM Tip
11-22 4Q2010
Rippers / Scarifiers
45
Surface 40
Hardness
Rc 35
30 DH-2
25
The advantage of DH-3 over DH-2 material product is when the parts get
HOT, (for example: when the operating temperature of a DH-2 part
exceeds 400°F (200°C)). This exceeds the tempering temperature of DH-2
parts, resulting in a softer part. As the temperature increases above 400°F,
the part continues to get increasingly softer. This does not occur on DH-3
parts until operating temperatures exceed 800°F.
An infra-red gun was pointed at a D10N ripper tip that had been ripping a
relatively long pass. As the tip was raised above the ground level, the tip
temperature was recorded. Many readings were observed and temperature
ranges between 700°F and 900°F were recorded. At the 800°F temperature
range, the DH-2 tip had softened to Rc 35 (from Rc 49), while the DH-3
tip remained at Rc 49. For the remainder of that DH-2 tip’s life, it remained
soft and wore at a higher wear rate than the original Rc 49 wear rate.
In this example, the customer saw a 30-40% increase in life of the DH-3
tip over the DH-2 tip.
4Q2010 11-23
Rippers / Scarifiers
IMPROVED RIPPER TIP AND PROTECTOR RETENTION D8H (46A, 36A, 35A),
D8K (77V, 76V),
6808, 6810, 6812, 6814 D8L (53Y),
D8N (9TC, 1XJ),
A new retention system has been introduced which improves ripper tip and D9E (34A, 49A, 50A),
protector retention. D9G (66A),
D9H (90V),
D9L (14Y),
All one piece ripper shanks and all other current ripper shanks and adapters D9N (1JD, 6XJ),
(except 1U-3630 with 1-pin protector) available on production machines D10 (84W, 76X),
and in parts stock no longer use a pin assembly “A” (with spring clip) to D10N (2YD, 3SK),
D11N (74Z, 4HK) Track-Type Tractors
hold the tip and protector in place. Counter bores in the sides of the new
shanks and adapters provide space for a retainer which engages a groove
on the mating pin. All three sizes of ripper shanks, R450, R500 and R550
can use a bucket style pin and retainer “B” which provides superior reten-
tion capabilities over the former spring clip version. They are reusable, but
the number of tips that they can be reused with depends on the average life
of the tips and the abrasiveness of the material being ripped. For optimum
reliability, replace the pin and retainer whenever it becomes easy to drive
out the old pin or when the pin begins to protrude from the side of the
ripper (pin walking).
When severe ripping conditions cause “pin walking” in very short hours or
the loss of a tip can cause extensive damage to other equipment, an impact
ripper style pin and retainer assembly “C” should be used. The retainer
assembly contains a snap ring that locks into the groove on the mating pin.
The impact ripper systems are available on the R500 and R550 rippers
(D9L, D10N, D10, D11N) and are installed as standard equipment on
those sizes of machines leaving the factory.
Care must be taken when installing the impact ripper style pin and retainer (A) Pin assembly with spring clip, (B) Bucket
assembly. It will take some effort to expand the enclosed snap ring with style pin and retainer, (C) Impact ripper style
pin and retainer assembly with snap ring
the tapered end of the pin. Once the snap ring is on the full diameter of the
pin, it then becomes very easy to drive the rest of the way. If the pin is hit
excessively hard, the snap ring could be damaged or even sheared by the
pin groove and result in loss of retention. A final gentle hammer blow is
all that is needed to allow the snap ring to drop into the pin groove.
Once in the groove, it takes a severe hammer blow to remove the pin. In
doing so, the snap ring is sheared or distorted and cannot be reused. The
shoulder of the pin groove also becomes rounded and if reused with a new
retainer assembly, retention capabilities are reduced. Impact ripper pins
and retainer assemblies, therefore, are not considered reusable.
11-24 4Q2010
Rippers / Scarifiers
The bucket and impact ripper style pins are much stronger than the former
pin assemblies with their drastically reduced center diameter. It was found
that even a slightly bent new pin would wedge solidly in the old diameter
pin bores, and they would have to be burned out. Consequently, the pin
bore diameters on the new ripper shanks are slightly larger. A customer
trying to use an old pin assembly in a new shank will find that the pin will
not grip inside the pin bore.
PIN & RETAINER ASSEMBLIES FOR RIPPER SHANKS WITH COUNTER BORES
New Former
Ripper Size Model Part Number Description Part Number
R450 D8H, D8K, D8L, D8N, 6Y-3394 Pin (Bucket Style)
D9E, D9G, D9H, D9N 8E-4743 Retainer (Bucket Style)
Pin Assembly (Tip & Upper Protector) 4T-2479
Pin Assembly (Lower Protector) 6J-8811
138-6450 Pin (Heavy Duty Style)
107-8559 Retainer Assembly (Heavy Duty Style)
R500 D9L, D10N, D10, 6Y-3909 Pin (Bucket Style)
D11N MS, 4T-4707 Retainer (Bucket Style)
D11R MS, 6Y-1204 Pin (Impact Ripper Style)
D10R 6Y-1202 Retainer Assembly (Impact Ripper Style)
Pin Assembly 102-90621
*138-6508* Pin (Heavy Duty Style)
113-4709 Retainer Assembly (Heavy Duty Style)
R550 D11N SS, 8E-2229 Pin (Bucket Style)
D11R SS 8E-2230 Retainer (Bucket Style)
9N-4245 Pin (Impact Ripper Style)
6Y-1205 Retainer Assembly (Impact Ripper Style)
Pin Assembly 6Y-2443
159-0558 Pin (Heavy Duty Style)
134-1809 Retainer Assembly (Heavy Duty Style)
1 3G-0500 Pin Assembly was cancelled and replaced by 102-9062 Pin Assembly.
See Service Magazine SEPD0230 from October 31, 1994, for further information.
4Q2010 11-25
Rippers / Scarifiers
11-26 4Q2010
Rippers / Scarifiers
Ripper Tips
Ripper tips must provide the customer with three benefits:
1. Maximum wear life for reduced tip costs
2. Sharp profile for penetration and increased productivity
3. Strength for breakage and resistance
Caterpillar has designed these benefits into two types of large ripper tips:
1. Extreme service ripper tips
2. Economy service ripper tips
Extreme Service Ripper Tips.
Available in DH-3 steel to fit the D8 through D11 size extreme service adapters. DH-3 tips are avail-
able in penetration and centerline configurations. Follow these guidelines when choosing Caterpillar
ripper tips:
Penetration Tips
Use in conditions where penetration is difficult. Tips are available
in three different lengths in most sizes.
NOTE: Penetration tips should be installed with the rib facing up.
Centerline Tips
Use in abrasive conditions (laminated or stratified materials) where
penetration is not a problem. Tips are available in three different
lengths in most sizes.
Always use the longest tip available unless excessive breakage
occurs.
All DH-3 ripper tips are forged for strength and thru-hardened for
excellent wear life. The tips are designed with the center-rib to
maintain a sharp profile.
4Q2010 11-27
Rippers / Scarifiers
D11N Multi-Shank,
D10, D10N, D9L
Protectors
Extended
Protector
Protectors shield the adapters and lower portion of the shank from wear
D9N/D8L/D8N
and impact. Failure to use a protector with a large ripper could result in
D9/D8/9B/8B
Protector
early shank and/or adapter replacement due to wear and damage.
Protectors are made from tough DH-2 Steel and thru-hardened for
strength and wear resistance.
Adapter
11-28 4Q2010
Rippers / Scarifiers
Outline
A) Determine Shank dimensions.
B) Select ripper shank adapters.
C) Select adapter protector.
D) Install System.
E) Complete Caterpillar Ground Engaging Tools Conversion Report Form (PEEP4210).
Conversion Guidelines
1. Measure the width and thickness of the competitive shank where the adapter will be welded to the
shank.
T 2. Select the adapter that will best fit the customer’s application based upon the width and thickness
measurements.
ADAPTER DIMENSIONS
Adapter Used On Caterpillar Competitive Shank
Part No. Machine Width (W) Thickness (T)
104-9279 D11N, D11R 16" (406 mm)-18" (457 mm) 3.5" (89 mm)-4.4" (110 mm)
1U-3630 D9L, D10, D10N 12.5" (317.5 mm)-16" (406 mm) 3" (76.2 mm)-4" (101.6 mm)
8E-8418 D8, D8L, D9 12.5" (317.5 mm)-14" (355.6 mm) 2" (50.8 mm)-3" (76.2 mm)
103-8115 D9L, D10, D10N, D10R 12.5" (317.5 mm)-14" (355.6 mm) 3" (76.2 mm)-4" (101.6 mm)
3. Protectors may restrict the use of some shank pin holes. If the distance from the
ripper shank pin hole down to the top of the protector (see A in illustration) is
less than the distance from the socket pin hole to the bottom of the socket (see B
B A in illustration) the protector will interfere with the socket. (The socket is the
ripper assembly opening into which the shank fits.)
To avoid interference, use a higher pin hole or trim the top of the protector.
Protector has
caused interference.
w
Pin holes do not line
up. (A is less than B.)
4Q2010 11-29
Rippers / Scarifiers
The following chart, shows the length the protector extends above the adapter/shank weld.
(No interference should occur with economy service protectors).
EXTENSION OF PROTECTOR ABOVE ADAPTER/SHANK WELD
Area Extending Above
Part No. Protector The Weld
104-9279 9N-4621 7.5" (190 mm)
1U-3630 1U-3644 7.5" (190 mm)
8E-8418 6J-8814* 2.3" (59 mm)
1U-4410 12.5" (318 mm)
103-8115 9W-8365 7.5" (190 mm)
6Y-8960
*8E-1848 sharpened protector can be used where shank bluntness reduces ripping effectiveness.
Installation
These installation guidelines are to be used with Special Instruction SEHS7888 entitled “Installation
of Ripper Shank Adapters.” Information not contained in the Special Instruction is included here.
Follow all pre-heat temperature guidelines. These temperatures have been recommended to reduce
the possibility of cracks in the shank and adapter.
1. Select the proper cut-off angle. The chart below lists the cut-off angles
necessary to achieve a ripping angle of 50 degrees. If a different ripping
angle is desired, vary the cut-off angle.
Adapter Shank
Part No. Cut-off Angle (A°)
104-9279 135°
1U-3630 135°
8E-8418 112°
A 103-8115 135°
0.5"
If the shank is wider than the adapter, any difference up to 0.5" (2.7 mm)
(12.7 mm) should be filled in with weld. If the difference is greater than 0.5" (12.7 mm),
maximum taper the shank to the adapter at a 3:1 ratio. For example, if the shank is
FIGURE 1 1" (25.4 mm) wider than the adapter, the taper on the shank should be 3"
(76.2 mm) in length (see Figure 2).
4. Weld the adapter in place.
Taper
5. Grind all welded areas smooth. Rough weld surfaces may cause early
3.0" failure.
(76.2 mm)
1.0"
(25.4 mm)
FIGURE 2
11-30 4Q2010
Rippers / Scarifiers
Outline
A) Determine ripper socket dimensions.
B) Select ripper shank.
C) Install system.
Conversion Guidelines
1. To convert a competitive ripper to a small Cat ripper shank
you need to measure the following:
A
A) socket width
B) socket thickness
B
C) pinhole diameter
(view from bottom of ripper tool bar) D) top of socket to pinhole (to assure that the shank will
at least be flush with the top of the socket when in top
D shank pin hole.)
C
2. Use these measurements to select the Cat shank that best
fits the competitive ripper. The following chart will show
(view from side of ripper tool bar) you the Cat shank that most closely fits the competitive
ripper socket.
4Q2010 11-31
Rippers / Scarifiers
11-32 4Q2010
Rippers / Scarifiers
4Q2010 11-33
Rippers / Scarifiers
11-34 4Q2010
Rippers / Scarifiers
Conversion Guidelines
for Repair Adapters and Noses
For rippers, there is one repair adapter and four repair adapter noses available for
converting competitive shanks to Caterpillar ripper components. The following
dimensions are needed to make the conversion:
Used on
Caterpillar Competitive Shank
Machine Width Thickness
116°
Repair Adapter Nose 103-8114 D11, D10, D9L 10.83"-12.80" 3.94"
(275 mm-325 mm) (100 mm)
Repair Adapter Nose 4T-9776 D9, D8 7.28"-9.25" 3.00"
9U-9694 D8R, D8R (185 mm-235 mm) (76.2 mm)
Repair Adapter Nose 8E-7350 983, D7, D6, D5 6.88"-9.00" 2.91"
(174.8 mm-228.6 mm) (73.9 mm)
Repair Adapter 9W-7488* 983, D7, D6, D5
Repair Adapter Nose 8E-7300 963, 955, 951, 941, 5.48"
14, 140, 130, 12, 12D (139.2 mm)
Repair Adapter 107-3361** D10N, D11N MS
D10R, D11R MS
** Use repair adapter 9W-7488 when more shank material is needed than is available in 8E-7350.
Cut-off angle for 9W-7488 is 116°, as shown at left, to achieve 50° ripping angle.
** Two pin protector.
4Q2010 11-35
Rippers / Scarifiers
NOTES
4Q2010 12-1
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
12-2 4Q2010
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
4Q2010 12-3
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODELS 637 (64M), 631 (11G), 630B (10G), 631BSA (28F), 630BSA (32F)
Edge Thickness — inches (mm) 0.88 (22) 1.12 (28) 1.38 (35) 1.62 (41)
Center Edge — 16" (406 mm) (1) 4T-6565 (1) 4T-2900 (1) 7J-3026 (1) 7J-2957
Bolt (9) 4J-9058 (9) 4J-9058 (9) 4J-9058 (9) 4J-9058
Nut (9) 2J-3507 (9) 2J-3507 (9) 2J-3507 (9) 2J-3507
End Edge — 16" (406 mm) (2) 7J-0225
Bolt (6) 4J-9058
Nut (6) 2J-3507
End Edge — 13" (330 mm) (2) 4T-6614 (2) 4T-6378 (2) 9W-6092 (2) 7J-2959
Bolt (12) 4J-9058 (12) 4J-9058 (12) 4J-9058 (12) 4J-9058
Nut (12) 2J-3507 (12) 2J-3507 (12) 2J-3507 (12) 2J-3507
Router Bit: Standard (2) 4J-8665 (2) 4J-8665 (2) 4J-8665 (2) 4J-8665
Router Bit: Heavy Duty 7J-3023♦ 7J-3023♦ 7J-3023♦ 7J-3023♦
Router Bit: Quick-Change # # # #
Router Bit: Level Cut (2) 220-9150 (2) 220-9150 (2) 220-9150 (2) 220-9150
Bolt (10) 4F-4042 (10) 4F-4042 (10) 4F-4042 (10) 4F-4042
Nut (10) 2J-3507 (10) 2J-3507 (10) 2J-3507 (10) 2J-3507
MODELS 637 (20W-23W, 7CB, 1LB, 1HB, AWE, AYN), 631 (28W-29W, 1BB, AXZ)
Edge Thickness — inches (mm) 0.88 (22) 1.12 (28) 1.38 (35) 1.62 (41)
Center Edge — 16" (406 mm) (1) 4T-6566 (1) 4T-3444 (1) 9J-4369 (1) 9J-5899
ARM Center Edge — 16" (406 mm) (1) 138-6443 (1) 138-6445 (1) 195-5114
ARM Serrated Center Edge — 16" (406 mm) (1) 195-5132
(1) 208-8872
(1) 144-1557
ARM Serrated Center Edge — 19" (482 mm) (1) 208-8873
Bolt (10) 4F-4042 (10) 4F-4042 (10) 4F-4042 (10) 4F-4042
Nut (10) 2J-3507 (10) 2J-3507 (10) 2J-3507 (10) 2J-3507
End Edge — 13" (330 mm) (2) 4T-6614 (2) 4T-6378 (2) 9W-6092 (2) 7J-2959
ARM End Edge — 13" (330 mm) (2) 138-6444 (1) 138-6446
Bolt (12) 4F-4042 (12) 4F-4042 (12) 4F-4042 (12) 4F-4042
Nut (12) 2J-3507 (12) 2J-3507 (12) 2J-3507 (12) 2J-3507
End Edge — 16" (406 mm) (2) 7J-0225
Bolt (12) 4F-4042
Nut (12) 2J-3507
Router Bit: Standard (2) 4J-8665 (2) 4J-8665
Router Bit: Heavy Duty 7J-3023♦ 7J-3023♦
Router Bit: Quick-Change # #
Router Bit: ARM Standard (2) 143-3065 (2) 143-3065
Router Bit: ARM Heavy Duty (2) 143-3079 (2) 143-3079
Router Bit: Level Cut (2) 220-9150 (2) 220-9150
Bolt (10) 4F-4042* (10) 4F-4042*
Nut (10) 2J-3507 (10) 2J-3507
MODELS 627 (69M, 50K, 4YK, 37V-38V, 6FB, 6HB, AYK, CEZ), 621 (37G, 36V, 6BB, 5JK, ANG, CEP)
Edge Thickness — inches (mm) 0.88 (22) 1.12 (28) 1.38 (35) 1.58 (41)
Center Edge — 16" (406 mm) (1) 4T-6568 (1) 4T-2896 (1) 257-1857 (1) 132-4566
(1) 264-2125
ARM Center Edge — 16" (406 mm) (1) 140-6779
Serrated Center Edge — 16" (406 mm) (1) 195-7279
ARM Serrated Center Edge — 16" (406 mm) (1) 140-6767
Bolt (9) 3J-2801 (9) 3J-2801 (9) 3J-2801 (9) 3J-2801
Nut (9) 2J-3507 (9) 2J-3507 (9) 2J-3507 (9) 2J-3507
End Edge — 16" (406 mm) (1) 195-5131 (2) 4T-2894 (2) 257-1870
(2) 264-2124
ARM End Edge — 16" (406 mm) (2) 144-1323
Bolt (10) 3J-2801 (10) 3J-2801 (10) 3J-2801
Nut (10) 2J-3507 (10) 2J-3507 (10) 2J-3507
End Edge — 13" (330 mm) (2) 4T-6612 (2) 4T-6380 (2) 132-4567
ARM End Edge — 13" (330 mm) (2) 140-6778
Bolt (10) 3J-2801 (10) 3J-2801 (10) 3J-2801
Nut (10) 2J-3507 (10) 2J-3507 (10) 2J-3507
Router Bit: Standard (2) 4J-8665 (2) 4J-8665 (2) 4J-8665
Router Bit: Heavy Duty (2) 7J-3023 (2) 7J-3023 (2) 7J-3023
Router Bit: Quick-Change # # #
Router Bit: ARM Standard (2) 143-3065 (2) 143-3065 (2) 143-3065
Router Bit: ARM Heavy Duty (2) 143-3079 (2) 143-3079 (2) 143-3079
Router Bit: Level Cut (2) 220-9150 (2) 220-9150 (2) 220-9150
Bolt (10) 4F-4042 (10) 4F-4042 (10) 4F-4042
Nut (10) 2J-3507 (10) 2J-3507 (10) 2J-3507
* Use 8J-2928 bolt when using 8W-2037 spacer (part of rock kit arrangement).
♦ Requires thicker reinforcement on all but 637E scraper. See Special Instruction SMHS 8410 for installation instructions.
# See page 12-17 for Quick-Change part numbers.
12-4 4Q2010
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODELS 623 (26U, 5SG, 61E, 6DB, AWB, CEW), J619 (43F), J621 (43H)
Edge Thickness — inches (mm) 0.88 (22) 1.12 (28)
Center Edge — 16" (406 mm) (1) 4T-2887 (1) 4T-2895
Serrated Center Edge — 16" (406 mm) (1) 201-3439
ARM Center Edge — 16" (406 mm) (1) 140-6847
ARM Serrated Center Edge — 16" (406 mm) (1) 140-6780
Bolt (10) 4F-4042 (10) 4F-4042
Nut (10) 2J-3507 (10) 2J-3507
Center Edge — 13" (330 mm) (1) 4T-6620
ARM Center Edge — 13" (330 mm) (1) 144-1340
Bolt (10) 4F-4042 (10) 4F-4042
Nut (10) 2J-3507 (10) 2J-3507
End Edge — 16" (406 mm) (2) 195-5131 (2) 4T-2894
Bolt (10) 4F-4042 (10) 4F-4042
Nut (10) 2J-3507 (10) 2J-3507
End Edge — 13" (330 mm) (2) 4T-6612 (2) 4T-6380
ARM End Edge — 13" (330 mm) (2) 140-6778
Bolt (10) 4F-4042 (10) 4F-4042
Nut (10) 2J-3507 (10) 2J-3507
Router Bit: Standard (2) 4J-8665 (2) 4J-8665
Router Bit: Quick-Change # #
Router Bit: ARM Standard (1) 143-3065
Router Bit: Level Cut (2) 220-9150 (2) 220-9150
Bolt (10) 1D-4709 (10) 1D-4709
Nut (10) 2J-3507 (10) 2J-3507
4Q2010 12-5
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
12-6 4Q2010
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODELS 442 (83E, 33F), 435 (45D, 35E, 85F, 88F), 428 (44D, 43D)
Edge Thickness — inches (mm) 0.88 (22) 1.12 (28)
Center Edge — 16" (406 mm) (1) 4T-6567 (1) 4T-2891
Bolt (8) 1J-5607 (8) 1J-5607
Nut (8) 2J-3507 (8) 2J-3507
Center Edge — 13" (330 mm) (1) 4T-6621
Bolt (8) 1J-5607
Nut (8) 2J-3507
End Edge — 16" (406 mm) (2) 4T-2894
Bolt (10) 1J-5607
Nut (10) 2J-3507
End Edge — 13" (330 mm) (2) 4T-6612 (2) 4T-6380
Bolt (10) 1J-5607 (10) 1J-5607
Nut (10) 2J-3507 (10) 2J-3507
Router Bit (2) 1J-3599 (2) 1J-3599
Bolt (5) 5J-4773 (5) 5J-4773
Nut (5) 2J-3506 (5) 2J-3506
MODEL 80 (5W)
Edge Thickness — inches (mm) 0.88 (22)
Center Edge — 16" (406 mm) (1) 4T-6565
Bolt (9) 4F-4042
Nut (9) 2J-3507
Center Edge — 13" (330 mm) (1) 4T-6617
Bolt (8) 4F-4042
Nut (8) 2J-3507
End Edge — 13" (330 mm) (2) 4T-6612
Bolt (10) 4F-4042
Nut (10) 2J-3507
Router Bit (2) 8F-7232
Bolt (5) 5J-4773
Nut (5) 2J-3506
4Q2010 12-7
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODEL 80 (2D)
Edge Thickness — inches (mm) 0.88 (22)
Center Edge — 13" (330 mm) (1) 4T-6622
Bolt (17) 5J-4772
Nut (17) 2J-3505
End Edge — 13" (330 mm) (2) 4T-6624
Bolt (7) 5J-4772
Nut (7) 2J-3505
Router Bit (2) 8F-7232
Bolt (10) 5J-4773
Nut (10) 2J-3506
12-8 4Q2010
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODEL 60 (1D)
Edge Thickness — inches (mm) 0.75 (19)
Center Edge — 10" (254 mm) (1) 4T-2881
Bolt (12) 4F-7827
Nut (12) 2J-3506
End Edge — 10" (254 mm) (2) 4T-2884
Bolt (6) 4F-7827
Nut (6) 2J-3506
Router Bit (2) 9F-1831
Bolt (8) 4F-3654
Nut (8) 4K-0367
MODEL 40 (1W)
Edge Thickness — inches (mm) 0.62 (16)
Center Edge — 10" (254 mm) (1) 4T-2874◊
Bolt (10) 4F-3672
Nut (10) 2J-3506
Center Edge — 8" (203 mm) (1) 4T-2962
Bolt (10) 4F-3672
Nut (10) 2J-3506
End Edge — 8" (203 mm) (2) 4T-2965
Bolt (8) 4F-3672
Nut (8) 2J-3506
Router Bit None
4Q2010 12-9
Scrapers
ELEVATING SCRAPER PARTS
12-10 4Q2010
Scrapers
ELEVATING SCRAPER PARTS/PARTS KITS
4Q2010 12-11
Scrapers
PLASTIC AUGER GROUPS
12-12 4Q2010
Scrapers
STEEL AUGER GROUPS
4Q2010 12-13
Scrapers
TEETH FOR ELEVATING SCRAPERS
Bolt-on Adapters
623, J621, J619 615
MODEL 633, 639 615 (47Z1340-Up) (47Z1-1339) 613
Adapter 9W-9971*a 9J-2307** 4T-5805** 9J-8455**
Bolt (2) 1J-4947 (2) 1J-3527 (2) 1J-0849 (2) 5F-8933
Nut (2) 2J-3507 (2) 2J-3507 (2) 2J-3505 (2) 2J-3506
Washer (2) 5P-8250 (2) 5P-8250 (2) 5P-8248 (2) 5P-8248
No. of Teeth Per Group 5 4 5 4
Tip (one of following types)
Short 1U-3351 1U-3301 1U-3301 1U-3251
Long 1U-3352 1U-3302 1U-3302 1U-3252
Penetration 9J-4359 9J-4309 9J-4309 9J-4259
Wide 107-3350 107-3300 107-3300 3G-8250
Sharp 9W-2359 9W-8309 9W-8309 9W-8259
Heavy Duty Long 9N-4352 9N-4302 9N-4302 9N-4252
Heavy Duty Abrasion 9N-4353 9N-4303 9N-4303 9N-4253
Pin 8E-6358 9J-2308 9J-2308 8E-6258
Retainer Assembly 8E-6359 8E-6259 8E-6259 8E-6259
Heavy Duty Pin 114-0358
Heavy Duty Retainer Assembly 114-0359
* Use with 13⁄8" (35 mm) center edge.
** Use with 7⁄8" (22 mm) center edge.
a Recommended for use only with 9W-9972 notched center edge. Use 8J-3137 end edges with 86H models. Use 9J-1109 end edges with 19W models.
12-14 4Q2010
Scrapers
4Q2010 12-15
Scrapers
4Q2010
12-17
Scrapers
Scrapers
12-18 4Q2010
Scrapers
ROUTER BITS
Caterpillar router bits help prevent wear and costly damage to the scraper bowl.
Features Benefits
✔ Forged DH-2 steel ✔ Guaranteed against breakage
✔ Thru-hardened ✔ Prolongs wear life
✔ Reversible (except Quick-Change and 613C) ✔ Two wear edges on one piece
Standard Router Bits are available for all models and are recommended
for most applications.
Clean-Up Router Bits are used with edges in the level cut arrangement
to reduce flow of loose material around the bowl corners. Special router
bits are required for the 615; two-position router bits for the 613C can be
installed in the “clean-up” position. (9W-4903)
Clean-Up Router Bit
ARM Router Bits are available for virtually all scrapers. They are for use
in high abrasion, low-impact applications. ARM is applied to all wear sur-
faces of the router bit for longer life and reduced cost per hour.
Level Cut Bits are used for clean-up work and keep material in front of
the cutting edges.
4Q2010 12-19
Scrapers
WARRANTY INFORMATION
Consult your local dealership for details of the Caterpillar Ground
Engaging Tools Warranty.
12-20 4Q2010
Scrapers
SCRAPER CUTTING EDGE CONVERSION PROCEDURE
Outline
A) Determine cutting edge dimensions.
1. Rolled Section Edges.
2. Replaceable Tip Edges.
B) Select cutting edges.
1. Rolled Section Edges.
2. Replaceable Tip Edges.
C) Determine Router Bit Bolt Hole Size and Spacing.
D) Select Router Bits.
E) Modify cutting edges if necessary.
F) Install router bit support if necessary.
G) Install cutting edges and router bits.
4Q2010 12-21
Scrapers
SCRAPER CUTTING EDGE CONVERSION PROCEDURE
Heaped Recommended
Capacity Cutting Edge Thickness
Below 11 yd3 0.75" (19 mm)
(8.4 m3) 0.88" (22 mm)
11 yd3 to 22 yd3 0.88" (22 mm)
(8.4 m3 to 16.8 m3) 1.12" (28 mm)
22 yd3 & up 1.12" (28 mm)
(16.8 m3 & up) 1.62" (40 mm)
6. Bolt Size Required — Sometimes it is necessary to drill competitive supports oversize to accept
Cat edges.
7. Number of Bolt Holes — Count only the bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing.
Step 3
Refer to the Scraper Cutting Edge Conversion Tables.
Find an edge with the same bolt hole size and spacing and total length needed ± 0.25" (7 mm).
Make sure that the edge thickness is close to what is correct for the machine.
If no edge can be found, go to Step 4.
Step 4
Find an edge with the same hole size and spacing, but longer
length. Cut the edge to size.
W NOTE: It may be possible to reduce waste by making two edges
A
B to fit competitive machines from one Caterpillar edge.
To determine if this can be done, add the total number of
F D C bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing
L
TYPE 4 from both competitive edges.
NOTE: Bulldozer cutting edges can be used to convert scrapers.
If only one row of holes is required, consult Bulldozer
Cutting Edge Conversion Charts for dimensions.
W CAUTION: Before modifying edges to fit a competitive scraper,
A verify that the edge will neither interfere with the
B
ejector, apron or elevator flights nor extend into the
F D C bowl. Do this by installing the edge on the support.
L
TYPE 5
12-22 4Q2010
Scrapers
DIMENSIONS — SCRAPER CUTTING EDGES
4Q2010 12-23
Scrapers
DIMENSIONS — SCRAPER CUTTING EDGES
12-24 4Q2010
Scrapers
DIMENSIONS — SCRAPER CUTTING EDGES
4Q2010 12-25
Scrapers
W
W A
A B
B
F D C
F D C
L L
TYPE 4 TYPE 5
12-26 4Q2010
Scrapers
ROUTER BIT CONVERSION PROCEDURE
L T
Full Replacement
TYPE 4 4T-7667 RH 4T-7668 LH — 1.00" (25.4 mm) thick
7J-4227 RH 7J-4228 LH — 1.38" (35.1 mm) thick
Partial Replacement
229-7147 RH — 1.18" (30.0 mm) thick
229-7148 LH — 1.18" (30.0 mm) thick
4Q2010 12-27
Scrapers
DIMENSIONS — ROUTER BITS
12-28 4Q2010
Scrapers
EJECTOR ARTICULATED TRUCKS
4Q2010 12-29
Scrapers
NOTES
4Q2010 13-1
GET Service Tools
13-2 4Q2010
GET Service Tools
235-0039
Model: PM-465 and PM-565 Cold Planer
Essential Tool
235-0038 • Used to replace bit holder base
• Locates and holds replacement bit holders in original position, angle,
and pitch
• Saves time — quickly locks base into position for welding
Service Parts
Part No. Description
235-0037 Jaw Fixture Assembly
235-0038 Jaw Fixture Assembly
235-0039 Clamp Fixture Assembly
6V-3072 Plastic Case
NEEG2978 Decal
Reference
SEBU7705 Service Manual
Reference
SENR6058, 5130 Service Manual Module, Disassembly and Assembly
SEHS9721, Special Instruction, Assembly Procedure for Hydraulic
Excavator (5130 only)
4Q2010 13-3
GET Service Tools
Reference
NEHG0696 Special Instruction
13-4 4Q2010
GET Service Tools
Fabric Baskets
SMCS Code: 0632, 6800
Model: All Models with Ground Engaging Tools (GET)
Warranty: Manufacturer’s
149-0173 냖 Cοmpliant
149-0174
• Used to help remove and install bucket teeth, cutting edges, and
adapters
• Must be used with overhead lifting device
• Provides an easy method of moving Ground Engaging Tools products
in and out of service trucks or shop environment
• Non-choker style baskets must be used in pairs (securely holds cutting
edge)
• Suitable nylon strap (sold separately) must be used with 149-0174
Reference
NEHS0700 Tool Operating Manual, Using the Choker Style Fabric Basket
to Install and Remove Bucket Teeth and NEHS0701 Tool Operating
Manual, Using Non-Choker Style Fabric Baskets to Install Bucket or Blade
Cutting Edges
4Q2010 13-5
GET Service Tools
13-6 4Q2010
GET Service Tools
4Q2010 13-7
GET Service Tools
Most of the time, the second to last and the third to last locations in the
part number identify the “J” size.
Reference
PECP-3001 Parts Sales Kit
13-8 4Q2010
GET Service Tools
4Q2010 13-9
GET Service Tools
Pin Drivers
Part No. Pin Diameter Use
272-1228 1/2" Diameter Pin Driver Recommended for pins and bolts
greater than 1/2" up to 7/8" in
diameter
272-1230 7/8" Diameter Pin Driver Recommended for pins greater than
7/8" up to 1-1/4” in diameter
272-1233 1-1/4" Diameter Pin Driver Recommended for pins greater than
1-1/4" up to 2" in diameter
272-1237 2" Diameter Pin Driver Recommended for pins greater than
2" up to 2-1/2" in diameter
272-1239 2-1/2" Diameter Pin Driver Recommended for pins greater than
2-1/2" up to 3" in diameter
272-1240 3" Diameter Pin Driver Recommended for pins greater than
3" up to 4" in diameter
13-10 4Q2010
GET Service Tools
4Q2010 13-11
GET Service Tools
Race/Bearing/Seal Adapter
Part No. Use
Fits plates
with common 272-1249 Install races, bearings and seals with this adapter driver tip
9/16” center Add drive plates to the end of the adapter in various combinations
hole Fits plates with a common 9/16" center hole, up to 3/4" high
(plates not included)
5 lb Handle Weight
Part No. Use
272-1253 Increases the Slide Sledge striking force by 5 lb; works
with any of the four tools by threading onto tool handle
4Q2010 14-1
GET Made As Ordered (MAO) Program
14-2 4Q2010
GET Made As Ordered (MAO) Program
1) Wheel Loaders — Flat Cutting Edge, Segments, Segment Edges, ARM Tips, Base Edge and Base Edge
Assemblies — Straight and Spade
2) Excavators and Shovels — Base Edge and Base Edge Assemblies, Cutting Edges
3) Scrapers — ARM Router Bits, Flat Cutting Edge 1 Row, 2 Row and 3 Rows of Holes, Serrated Flat Cutting
Edge 1 Row, 2 Row and 3 Rows of Holes
4) Dozer and Rippers — Serrated Flat Cutting Edge, Cutting Edge with Center Holes, Sole Plates with
Center Holes, Sole Plates with Offset Holes, Tips, Cutting Edge with Offset Holes, Cutting Edge —
Centerline w/1 V End, Cutting Edge — Centerline w/2 V End, Cutting Edge — Offset Holes w/1 V End,
Cutting Edge — Offset Holes w/2 V End, End Bit Single Row Holes, End Bit Double Row Holes, Serrated
Flat Cutting Edge w/1 V End and Serrated Flat Cutting Edge w/2 V End
5) Motorgrader — Flat Cutting Edge, Curved Cutting Edge, Serrated Curved Cutting Edge and Serrated
Flat Cutting Edge
6) Paving Product — Solid Tungsten Carbide Cutting Edge
For further MAO information — on past product produced — see MAO IRMs — New IRM each yearly quarter.
4Q2010 14-3
GET Made As Ordered (MAO) Program
DOZER
Plow Bolt Hole
Machine Part # Name Description Edge Size Bolt Type Space Position
Dozer 138-6549 Sole Plate Dozer blade sole plate – 3/4" 10" 3.5' 7/8" Flat 6" Center
interchangeable with
KAN AM Part 400-0785
Dozer 140-6829 Sole Plate Dozer blade sole plate – 7/8" 16" 5' 1" Flat 6" Double Center
interchangeable with
KAN AM Part 400-0724
Dozer 140-6833 Sole Plate Dozer blade sole plate – 3/4" 10" 3.0' 7/8" Flat 6" Center
interchangeable with
KAN AM Part 400-0825
Dozer 174-8001 Sole Plate Dozer blade sole plate – 7/8" 16" 5' 1" Flat 6" Double Center
interchangeable with
KAN AM Part 400-0948
Dozer 174-8002 Sole Plate Dozer blade sole plate – 7/8" 16" 4' 1" Flat 6" Double Center
interchangeable with
KAN AM Part 400-0949
Dozer 178-4080 Sole Plate Dozer blade sole plate – 7/8" 13" 3' 1" Flat 6" Center
interchangeable with
KAN AM Part 400-0851
Dozer 178-4081 Sole Plate Dozer blade sole plate – 7/8" 13" 3.5' 1" Flat 6" Center
interchangeable with
KAN AM Part 400-0852
SCRAPER
Plow Bolt Hole
Machine Part # Name Description Edge Size Bolt Type Space Position
Reynolds Pull 229-6953 Cutting Edge BOCE with bevel on 3/4" 8" 3/4" Flat 2", 10" Top and
Pan Scraper both sides 12' & 1.87" Bottom
Reynolds Pull 229-6949 Cutting Edge BOCE outer section with 3/4" 10" 3/4" Flat 3.5" & 7" Top
Pan Scraper bevel on both sides 3.5'
Reynolds Pull 229-6950 Cutting Edge BOCE center section with 3/4" 14" 3/4" Flat 3.5" & 7" Top
Pan Scraper bevel on one side 3.5'
Weyco Pull 264-2199 Cutting Edge BOCE center section with 5/8" 8" 5/8" Curved 4.94" & 10" Double
Pan Scraper bevel both sides 5.8' & 4.94" Center
Weyco Pull 264-2200 Cutting Edge BOCE end section with 5/8" 8" 5/8" Curved 1.94" & 10" Double
Pan Scraper bevel both sides 3.07' & 4.94" Center
BOCE — Bolt-On Cutting Edge
14-4 4Q2010
GET Made As Ordered (MAO) Program
WHEEL DOZER
Edge Plow Bolt Hole
Machine Part # Name Description Size Bolt Type Space Position
824C 232-2124 Cutting Edge BOCE for Balderson 1.8" 10" 1" Flat 2.1" & 6" Center
U-Blade 2.4'
824C 232-2125 Cutting Edge BOCE for Balderson 1.8" 10" 1" Flat End 3.2" & 6" Center
U-Blade 3.2' Edge & 5"
834B 135-9661 Cutting Edge BOCE for Balderson 1.8" 13" 1" Flat 6" Center
U-Blade 9485C2 4.0'
Center Edge
834B 135-9662 Cutting Edge BOCE for Balderson 1.8" 13" 1" Flat 6" Center
U-Blade 9485C2 RH End 3.2'
834B 135-9663 Cutting Edge BOCE for Balderson 1.8" 13" 1" Flat 6" Center
U-Blade 9485C2 LH End 3.2'
834B 135-9664 Cutting Edge BOCE for Balderson 1.8" 13" 1" Flat 6" Center
U-Blade 9485C2 LH Center 1.7'
834B 135-9665 Cutting Edge BOCE for Balderson 1.8" 13" 1" Flat 6" Center
U-Blade 9485C2 RH Center 1.7'
834B 135-9632 Cutting Edge HD BOCE for Balderson 2.4" 13" 1" Flat 6" Center
Wide U-Blade 9485C2 — 4.0'
Center
834B 135-9633 Cutting Edge HD BOCE for Balderson 2.4" 13" 1" Flat 6" Center
Wide U-Blade 9485C2 – 3.2'
RH End
834B 135-9634 Cutting Edge HD BOCE for Balderson 2.4" 13" 1" Flat 6" Center
Wide U-Blade 9485C2 – 3.2'
LH End
834B 135-9635 Cutting Edge HD BOCE for Balderson 2.4" 13" 1" Flat 6" Center
Wide U-Blade 9485C2 – 1.7'
LH Center
834B 135-9636 Cutting Edge HD BOCE for Balderson 2.4" 13" 1" Flat 6" Center
Wide U-Blade 9485C2 – 1.7'
RH Center
Tiger 208-5349 Cutting Edge HD BOCE for Balderson 2.4" 13" 1" Flat 6" Center
Machine 690 S/U Tiger 690 Blade 9646C1 4.0'
BOCE — Bolt-On Cutting Edge HD — Heavy Duty
MOTORGRADER
Edge Plow Bolt Hole
Machine Part # Name Description Size Bolt Type Space Position
Competitive machine 208-5338 Cutting Edge BOCE 3/4" 8" 12.5' 5/8" Flat 3" & 12" Top
snow wing
BOCE — Bolt-On Cutting Edge
4Q2010 14-5
GET Made As Ordered (MAO) Program
14-6 4Q2010
GET Made As Ordered (MAO) Program
4Q2010 14-7
GET Made As Ordered (MAO) Program
UNDERGROUND MACHINES
Machine Part # Name Description
BROYT Underground 201-3438 Base Edge Spade Base Edge Assy 39" 107" 2.5" W/7 J550 Adapters.
Mining Machine
Elphinstone Underground 138-0854 Edge Cutting Half Arrow Bolt-On Half Arrow Edge for Elphinstone Spade Nose Bucket.
Elphinstone Underground 138-6488 Edge Cutting Half Arrow Bolt-On Half Arrow Edge for a 2400 mm Wide Elphinstone
Spade Nose Bucket.
Elphinstone Underground 138-6489 Edge Cutting LH Half Arrow Bolt-On Half Arrow Edge for a 2400 mm Wide Elphinstone
Spade Nose Bucket.
Elphinstone Underground 138-6490 Edge Cutting RH Half Arrow Bolt-On Half Arrow Edge for a 2400 mm Wide Elphinstone
Spade Nose Bucket.
Elphinstone Underground 140-6796 Edge Cutting LH Half Arrow Bolt-On Half Arrow Edge for Elphinstone Spade Nose Bucket.
Elphinstone Underground 140-6797 Edge Cutting RH Half Arrow Bolt-On Half Arrow Edge for Elphinstone Spade Nose Bucket.
4Q2010 15-1
Appendix
CONVERSIONS
15-2 4Q2010
Appendix
GLOSSARY
GLOSSARY Fitup
Extent to which a given part fits with a mating part.
Abrasive
Any substance used for abrading, such as grinding, pol- Footprint
ishing, blasting, etc. Material may be bonded to form Worn portion of part that contacts the working surface.
wheels, bricks and files, or applied to paper and cloth by Hardness
means of glue. Natural abrasives include emery, corun-
dum, garnet, sand, etc. Main manufactured abrasives are The ability of a metal to resist penetration.
silicon carbide and aluminum oxide. Metallic shot and Heat Resistance
grit are also used as abrasives in cleaning castings. Ability of a part to withstand higher operating tem-
Alloying Elements peratures.
Elements added to nonferrous and ferrous metals and Impact Resistance
alloys to change their characteristics and properties. Ability of a part to resist shock loads.
Alloy Steel Low Hydrogen Weld Overlay (Butter Beading)
Steel consisting of substantial amounts of one or more A prewelded overlay that eliminates the need to pre-
alloying elements added to a carbon steel to modify heat before welding.
the properties of the steel.
Metallurgy
ARM (Abrasion Resistant Material) Science dealing with the constituents, structure and
Application of tungsten carbide particles to a part to properties of metals and alloys, and the processes by
protect critical wear areas. which they are obtained from ore and adapted to the
Breakage use of man.
Failure of a part when subjected to a load. Penetration
Brinell Hardness Test Ability to dig into material or working surface.
Value of hardness of a metal or alloy, tested by mea- Retention
suring the diameter of an impression made by a ball of Ability of one part to maintain a proper fit with mat-
given diameter applied under a known load. Values are ing part, such as tip and adapter.
expressed in millimeters.
Rockwell Hardness Test
Carbon Steel This test measures hardness by determining the depth
Steel which owes its properties chiefly to various per- of penetration of a penetrator into the specimen under
centages of carbon without substantial amounts of certain arbitrarily fixed test conditions.
other alloying elements; also known as ordinary steel
or straight carbon or plain carbon steel. Rockwell hardness values can be converted into Knoop
and Brinell hardness numbers.
Cost Per Hour
Strength
Average amount of customer’s expense for each hour
of work. Ability of a part to withstand impact.
Cost Per Ton Tempering
Average amount of customer’s expense for each ton of Application of heat to quenched, hardened steels or to
material moved. steels in the martensitic condition. Temperatures
employed in tempering are from slightly above room
DH-2™ Steel temperature to approximately 1200˚F. Tempering can
A steel alloy which thru hardens. also be accomplished by the austempering or martem-
pering methods. Tempering is also called drawing.
DH-3™ Steel
A thru-hardened steel alloy that remains hard at higher
operating temperatures, providing long wear life.
4Q2010 15-3
Appendix
GLOSSARY
15-4 4Q2010
Reference Materials
SOURCES OF CONVERSION/REPAIR INFORMATION
Special Instructions
Use these Special Instructions for reference when installing Caterpillar GET.
Product Document # Title/Description
1) 992G REHS0315 Procedure to Repair Cracks on Bucket
2) 994 REHS0208 Special Instruction for Converting 994 Wheel Loader Buckets to the
Mechanically Attached Adapter (MAA) System
3) 994 REHS0200 Inspection of Mechanically Attached Center Adapter (MAA) C-clamp
4) 994 REHS0067 Installation & Removal of Rock Bucket Mechanically Attached Adapter
(MAA) System and Lug Welding Procedure for 994 Wheel Loaders
5) 994 SEHS9955 Procedure for Field Installation of 994 Wheel Loader Bucket Wings
6) 994 SEHS9739 Conversion of Bucket Cutting Edge (3.0" to 4.0")
7) 5230 REHS0059 Replacing Base Edge Assembly, Adapters, Corner Adapters and Lugs on
5230 Front Shovel
8) 5130 REHS0046 Installation of Bucket Slag Pins (V680, V780)
9) 5130/5230 REHS0026 Procedure for Replacing Sidebars on Front Shovel Bowls
10) 5130/5230 REHS0213 Repair and Replacement of V780 and V1000 Adapter Noses
11) 5130/5230 REHS0463 Installation and Removal of Sidebar Protectors on
Large Hydraulic Excavators
12) 5130/5230 REHS0461 Installation and Removal of V1000, V880 and V810 Edge Protectors
13) 5130/5230 REHS0460 Installation and Removal of V1000, V880 and V810 Tips
14) 5230 REHS0462 Installation and Removal of V1000 Bottom Installed Coupler Pins
15) 5130 SEHS9927 5130 Excavator Heavy Duty Flex Pin Assembly
16) 5130 SEHS9810 Procedure for Replacing Base Edge Assemblies, Adapters, and Corner
Adapters on Front Shovel and Mass Excavation Buckets
17) 5130 SEHS9733 Assembly Procedure for Bucket Tips, Edge Covers and Sidebar Protectors
(Installing Flex Pins)
18) All REHS0597 Recommendations for Welding Two-Strap Bucket Adapters to Base Edges
19) All REHS0434 Procedure to Install Wear Protection on Base Edges and Adapters
20) All REHS0280-01 Installation & Removal of the Mechanically Attached
Wear Plate System
21) All REHS0260 Removal & Installation of the Mechanically Attached 138-0006 and
138-0007 Retainers
22) NEHS0700 Choker Style Fabric Basket to Install and Remove Bucket Teeth
23) NEHS0701 Non-Choker Style Fabric Baskets to Install and Remove Bucket or Blade
Cutting Edges
24) 416D-442D REHS0934 Installing Bucket Teeth of the Diagonal Retention System
25) 5130 REHS0464 Installation and Removal of V780 Taper Lock System
4Q2010 15-5
Reference Materials
SOURCES OF CONVERSION/REPAIR INFORMATION
15-6 4Q2010
Reference Materials
SOURCES OF CONVERSION/REPAIR INFORMATION
Other Publications
Document # Title/Description
1) SELD0751-06 Service Warranty Bulletin (NACD)
2) TECB1043 Dozer Performance: Rolling vs Sliding (Product Training Bulletin)
3) AEDK0752-02 Handbook of Ripping (Twelfth Edition)
4Q2010 15-7
Reference Materials
SOURCES OF CONVERSION/REPAIR INFORMATION
15-10 4Q2010
Reference Materials
BUCKET ADAPTER WELDING DATA
G
equalize clearance and reduce weld restraint.
.10 F
E K
4) Chamfer outside of remaining corner so that H bevel weld
can be deposited.
5) Preheat weld area to 400°F.
6) Tack weld.
7) Weld using dry E7018 electrode. For weld sizes, see sketch
and table below.
Adapter Corners A B C D E F G H J K
1U-12548K-6455/56 0.86 0.41 2.16 0.31 0.58 0.31 0.50 0.50 0.31 0.50
1U-13048K-6455/56 0.80 0.71 2.37 0.38 0.62 0.38 0.50 0.50 0.31 0.62
8K-7525/26 0.82 1.72 2.45 0.38 0.62 0.38 0.50 0.50 0.31 0.62
1U-1354/5/6 8K-7525/26 1.06 1.45 3.22 0.38 0.75 0.38 0.56 0.62 0.38 0.75
7K-9309/10 1.06 1.45 3.22 0.38 0.75 0.38 0.56 0.62 0.38 0.75
8E-0464/5/6 7K-9309/10 0.50 0.88 0.50 0.62 0.75 0.44 0.88
7J-9554/5/6 8K-6489/90 0.50 1.00 0.62 0.88 1.00 0.50 1.00
3G-4554/5/6
NOTE: All dimensions are in inches.
Adapter Corner A B C D E
9J-3662/3/4 8K-6489/90 3.44 3.44 0.75 0.88 1.00
8E-5464/5/6 7K-9309/10 3.06 2.81 0.62 0.75 0.88
1U-1350/1/2 8K-7525/26 2.38 1.75 0.50 0.62 0.88
9J-8929 8K-6455/56 1.88 1.38 0.31 0.50 0.75
3G-0169 8K-6455/56 1.88 1.38 0.31 0.50 0.75
8J-7525 5G-2806/07 0.94 0.50 0.25 0.31 0.31
NOTE: All dimensions are in inches.
4Q2010 15-11
Reference Materials
BUCKET ADAPTER WELDING DATA
Adapter Corners A B
1U-0307 8K-7525 0.62 0.44
8K-7526
1U-0257 8K-6455 0.56 0.44
8K-6456
9J-4207 5G-2806 0.44 0.38
5G-2807
NOTE: All dimensions are in inches.
Adapter Corners A B
3G-2357 7K-9309 1.38 0.50
7K-9310
3G-1357 8K-7525 1.00 0.38
8K-7526
3G-5307 8K-7525 0.88 0.31
8K-7526
* Burn corner forging so that A dimension to front of forging is 1.44" (36.6 mm).
NOTE: Three-bolt adapters have been replaced by two-bolt adapters for all current
base edge systems. All dimensions are in inches.
15-12 4Q2010
Reference Materials
HARDWARE DIMENSIONS
4Q2010 15-13
Reference Materials
7HARDWARE DIMENSIONS
15-14 4Q2010
Reference Materials
GET CONVERSION REPORT FORM
The Ground Engaging Tools Conversion Report Form (PEEP4210-04) should be used to report all
GET conversions. Please send completed forms to:
Forms can be ordered on the Dealer Terminal System or on a Literature Order form.
4Q2010 15-15
Reference Materials
GET CONVERSION REPORT FORM
15-16 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-17
Reference Materials
COMPETITIVE CONVERSION LISTING
15-18 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-19
Reference Materials
COMPETITIVE CONVERSION LISTING
15-20 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-21
Reference Materials
COMPETITIVE CONVERSION LISTING
15-22 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-23
Reference Materials
COMPETITIVE CONVERSION LISTING
15-24 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-25
Reference Materials
COMPETITIVE CONVERSION LISTING
15-26 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-27
Reference Materials
COMPETITIVE CONVERSION LISTING
15-28 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-29
Reference Materials
COMPETITIVE CONVERSION LISTING
15-30 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-31
Reference Materials
COMPETITIVE CONVERSION LISTING
15-32 4Q2010
Reference Materials
COMPETITIVE COMPARISON LISTING
4Q2010 15-33
Reference Materials
COMPETITIVE CONVERSION LISTING
15-34 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-35
Reference Materials
COMPETITIVE CONVERSION LISTING
15-36 4Q2010
Reference Materials
COMPETITIVE CONVERSION LISTING
4Q2010 15-37
Reference Materials
COMPETITIVE CONVERSION LISTING
15-38 4Q2010
Reference Materials
CATERPILLAR LIMITED WARRANTY
4Q2010 15-39
Reference Materials
CATERPILLAR LIMITED WARRANTY
NO POSTAGE NO POSTAGE
NECESSARY NECESSARY
IF MAILED IF MAILED
IN THE IN THE
UNITED STATES UNITED STATES
BUSINESS REPLY MAIL BUSINESS REPLY MAIL
FIRST CLASS MAIL PERMIT NO. 385 PEORIA, IL FIRST CLASS MAIL PERMIT NO. 385 PEORIA, IL
POSTAGE WILL BE PAID BY THE ADDRESSEE POSTAGE WILL BE PAID BY THE ADDRESSEE
GET PSK Reference Information Update GET PSK Reference Information Update
I have discovered the following ■ discrepancy ■ omission in: I have discovered the following ■ discrepancy ■ omission in:
Book Title: __________________________________________________________________________ Book Title: __________________________________________________________________________
Media No. _______________ Chapter/Section___________________________ Page No. _________ Media No. _______________ Chapter/Section___________________________ Page No. _________
Model ____________________ Serial No. ________________________ Part No. _______________ Model ____________________ Serial No. ________________________ Part No. _______________
Part Name __________________________________________________________________________ Part Name __________________________________________________________________________
Explanation _________________________________________________________________________ Explanation _________________________________________________________________________
___________________________________________________________________________________ ___________________________________________________________________________________
___________________________________________________________________________________ ___________________________________________________________________________________
___________________________________________________________________________________ ___________________________________________________________________________________
Suggestion__________________________________________________________________________ Suggestion__________________________________________________________________________
___________________________________________________________________________________ ___________________________________________________________________________________
___________________________________________________________________________________ ___________________________________________________________________________________
Dealer_____________________________________ Name ___________________________________ Dealer_____________________________________ Name ___________________________________
Address _________________________________________________ Phone_____________________ Address _________________________________________________ Phone_____________________
City_______________________________ State/Province _________________ Zip _______________ City_______________________________ State/Province _________________ Zip _______________
AEXQ0544
PECP3001-09
www.cat.com