Professional Documents
Culture Documents
Eco-friendly or 'green' buildings take advantage of natural light and feature plenty of
vegetation
MANILA, Philippines – How do you build structures with Mother Earth in mind?
Conventional buildings consume a lot of electricity and water and release greenhouse
gases into the atmosphere, contributing to global warming and air pollution.
If buildings are made eco-friendly starting 2015, the Philippines can save up to P35.2
billion ($800 million) in electricity and water costs by 2030. It can also prevent the
release of 1.90 million tons of carbon dioxide, the most common greenhouse gas, into
the atmosphere.
The Department of Public Works and Highways is crafting a Green Building Code
requiring all new buildings in the country to follow ecologically-sound standards.
Here are the features of a green building based on Mandaluyong City's new Green
Building Ordinance, which was passed last February.
Solar heat gain coefficient is the amount of solar radiation that enters through glass and
is released as heat inside a building. The lower the SHGC, the less solar heat it
transmits, the cooler the building. This also lowers electricity cost because air-
conditioning systems don't have to do all the work.
A device called an enthalpy wheel recovers cooled air from the inside and uses the
coolness of this "spent" air to cool fresh air from outside. The process also dehumidifies
the air from outside. This is a cost-efficient way to improve indoor air quality and lessen
energy consumed by airconditioning systems.
This type of lighting system has sensors that can detect daylight. During the day, the
sensor switches off the lights since there is enough light from the sun. When the sun
sets, the system will switch the lights on.
This way, the use of artificial lighting during the daytime is reduced. It prevents cases
when occupants are too lazy or forget to turn off the lights when they aren't needed.
5. Occupancy sensors
This lighting system only turns on when it senses people in the room. This technology
can also be found in escalators that activate only when there are people to ride on them.
6. Water-efficient fittings
The latest faucets and flush mechanisms use less water to do the same thing.
7. Rain-water harvesting
A structure catches rainwater and then stores it in big containers. The water can then be
used to water plants, flush toilets, or supply cooling towers.
Biodegradable waste can be composted and used as fertilizer for the building's
plants. Here is an example of a successful MRF in San Fernando, Pampanga.
9. Vegetation
Plants also help absorb some rainwater which would otherwise go to sewers and
drainage, later on contributing to flooding.
The building's design, construction. and operation practices should have minimum
impact on ecosystems and water resources.
•Residential buildings with total floor area greater than 20,000 square meters
•Office buildings with total floor area greater than 10,000 square meters
•Mixed-use buildings with total floor area greater than 10,000 square meters
•Educational buildings with total floor area greater than 5,000 square meters
•Retail buildings with total floor area greater than 15,000 square meters
•Hotel buildings
•Hospital buildings
•Government buildings
Because of the high investment cost for green buildings, standards can't be made to
apply to all kinds of buildings yet.
However, the savings in operational cost because of reduced energy and water
consumption may help endear Filipinos to the idea of building green.