FW Series
Application:
The Friction washer is made of cylindrical trough with an
inclined high speed running paddle screw to de-water and
clean ground material like film flakes, granules, and the simila
type material. The screw is fixed in the bearing housing by the
mean of two bearing and enclosed by stainless steel screen.
The ground material and water are fed from above at the lowe
end of the through. Then the material is washed while being
transported to the outlet at the top of the trough. Fines and
water are thrown through the fine screen to the ou
the friction of the hig speed screw clean the material. The
drain is located at the lower end of the tough. The screen is
automatically cleaned by means of a water rinsing unit.
Technical Specifiction
Model
Screw Lenght
Screw Diater
‘Screw Speed (Paddle)
Sereen Hole
Dive Motor
‘Water consumption
“Throughput ko)
PANCHAL PLASTIC MACHINERY PVT. LTD.
Plot # 127, G.I.D.C., Umbergaon - 396171,
Dist. Valsad, Gujarat, INDIA.
+ +4+91-260-2563391 / 2563392
Fax : ++91-260-2562892
Fw-3000
300mm
500mm
1000rpm
2.5mm
16-30 HP
100 m3ihr
PET 3 TonvHr
LDPE 1.5TontHr.
HOPE 2.5ToniHr,
Fw.2000
200mm
350mm
1000rpm
2.5mm,
10-45 HP
70 m3inr
PET 1 TonlHr
LDPE 0.5Tonvtr.
HDPE 0.7Ton/Hr.
info@panchal-plastic.com
Website : www.panchal-plastic.com