Professional Documents
Culture Documents
blo is h
ri
T F in
Three-component epoxy-cementitious thixotropic
mortar for smoothing off damp substrates
RECOMMENDATIONS If the entire contents are not required, make sure that
• Do not apply Triblock Finish directly on: the mixing ratios are strictly adhered to in order to avoid
– surfaces with a surface film of water; poor catalysing of the product.
– dusty, flaky or flimsy surfaces;
– anhydrite or gypsum-based substrates; Once prepared, Triblock Finish is workable for 40
– old, gypsum-based smoothing layers. minutes at +23°C, and so the product must be applied
within the times indicated.
• Do not apply Triblock Finish on cracks which are For mixing, we recommend using a low-speed drill to
subject to movement, the product is rigid and may avoid overheating the mix, which may reduce the
also crack. workability times and provoke air entrapment.
b s
Tri Fini PRODUCT IDENTITY
Colour: grey