Professional Documents
Culture Documents
0 INTRODUCTION
General: Normally the aggregate impact value of base course is 30, bituminous bound
macadam is about 35 and the cement concrete base course is 30.
Significance: The test gives an idea of toughness of the aggregate to resist facture
under the impact of moving loads.
2.0 OBJECTIVE
To determine the aggregate impact value in the laboratory.
3.0 APPARATUS
1. Impact Testing Machine:
Its consists of a cylindrical hammer of 13.5 kg. (30Ibs) sliding freely between two
vertical supports (called guides). Its fall is automatically adjusted to a height of
38cm. There is a brass plate over which an open cylindrical steel cup of internal
diameter 10.2cm and 5cm depth is placed and fixed to the brass plate.
2. Measure: A cylinder of internal diameter 7.5cm and 5cm deep for measure aggregate.
3. Tamping rod of I cm diameter and 23cm long rounded at one end and pointed at the other
end.
4.0 PROCEDURE
1. Sieve the aggregate and obtain the portion passing 12.5mm and
retained on 10mm sieve.
6. Release the hammer for fall freely on the aggregate. The test sample
is subjected to a total of 15 blows.
7. Remove the aggregate sample from the cup and sieve through 2.36
mm sieve.