This document provides compression capacity values (Qult and Qall) in kilonewtons for axial spun piles with diameters of 600mm and 800mm inserted into soil at depths from 0 to 32 meters. The soil types include clay and sand with varying densities as measured by the standard penetration test (N spt). The pile capacities generally increase with depth and are higher for the 800mm diameter pile compared to the 600mm pile. Qall values are calculated using a safety factor of 3 and must be greater than 150 tons.
This document provides compression capacity values (Qult and Qall) in kilonewtons for axial spun piles with diameters of 600mm and 800mm inserted into soil at depths from 0 to 32 meters. The soil types include clay and sand with varying densities as measured by the standard penetration test (N spt). The pile capacities generally increase with depth and are higher for the 800mm diameter pile compared to the 600mm pile. Qall values are calculated using a safety factor of 3 and must be greater than 150 tons.
This document provides compression capacity values (Qult and Qall) in kilonewtons for axial spun piles with diameters of 600mm and 800mm inserted into soil at depths from 0 to 32 meters. The soil types include clay and sand with varying densities as measured by the standard penetration test (N spt). The pile capacities generally increase with depth and are higher for the 800mm diameter pile compared to the 600mm pile. Qall values are calculated using a safety factor of 3 and must be greater than 150 tons.